Southeast #20, 2012 by Construction Equipment Guide

Published Nationally ®

Southeast Edition $3.00

“The Nation’s Best Read Construction Newspaper… Founded 1957.” October 3, 2012 • Vol. XXV • No. 20 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910 • www.constructionequipmentguide.com

Inside

Bledsoe County Builds Correctional Complex By Cindy Riley CEG CORRESPONDENT

Highland Holds Custom er Appreciation Day…8

RW Moore, Benchmark Host Skeet Shoot ing Event…12

Construction on a 431,000-sq.-ft. (40,041 sq m) prison that can house more than 1,400 inmates is close to completion in Pikeville, Tenn. The new Bledsoe County Correctional Complex on Horsehead Road, which according to the Tennessee Department of Corrections (TDOC) will create hundreds of new jobs, includes rows of large gray housing units made from stacked, precast cells built on the prison grounds. The project was first announced by the TDOC back in 2004, based on population projections which indicated the need for additional beds; however, work didn't actually begin until May 2010. A groundbreaking for the new facility was held in April 2010. The Bledsoe County addition consists of five buildings containing 632 cells produced in a total of 156 quad-cell modules and four double-cell modules. It is actually an expansion of the Southeastern Tennessee State Regional Correctional Facility, which was built in 1980 and is a time-building institusee COMPLEX page 34

Photo courtesy of Jason Gentry of Mid-State Construction

Crews install the 16-in. (40.5 cm) diameter HDPE distribution piping underneath the roadway.

Improving Housing Markets List Grows to 99 ACT Moves I nto Char lott e Market …16

Table of Contents ................4 Mini & Compact Equipment Section..........................43-61 Paving Section ............63-75

The number of improving housing markets across the country rose to 99 in September, according to the National Association of Home Builders/First American Improving Markets Index (IMI), released Sept. 10. This is up from 80 metros that were listed as improving in August and includes representatives from 33

states as well as the District of Columbia. The index identifies metropolitan areas that have shown improvement from their respective troughs in housing permits, employment and house prices for at least six consecutive months. Markets added to the list in September include such geographically diverse locations as

Tucson, Ariz.; Jacksonville, Fla.; Springfield, Ill.; Greenville, N.C.; and Bend, Ore. “The number of improving housing markets grew by 19 in September as 68 metros retained their spots, 31 new metros were added and just 12 dropped off the list,” noted Barry Rutenberg, see HOUSING page 80

Parts Section ................76-77

Canada Firm Proposes New Pipeline Route

Auction Section ..........82-93

Josh Funk ASSOCIATED PRESS

Business Calendar ............89 Advertisers Index ..............94

OMAHA, Nebraska (AP) The company that wants to build a pipeline to transport crude oil

from Canada to U.S. Gulf Coast refineries said Sept. 5 it has revised its proposed new route through Nebraska to avoid environmentally sensitive areas. The latest proposed Keystone

XL pipeline route is TransCanada’s second attempt to satisfy state environmental regulators. The Nebraska Department of Environmental Quality said in July that the initial revised route

crossed land that could erode easily and passed near unconfined aquifers that supply drinking water to residents and livestock. The new TransCanada propossee PIPELINE page 78

Page 2 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your sales representative to see how we can make a difference for you.

Main Office: 1023 S. 50th Street • Tampa, FL 866-586-8956 Fort Lauderdale Davie) 954-327-8808

Fort Myers 293-334-6063

Jacksonville 904-268-4400

Orlando 407-859-9160

Savannah, GA 912-966-5666

The Takeuchi product line is only available in the Tampa and Orlando locations.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 3

USED EQUIPMENT Doug Wilson 704-562-2032 Email: doug.wilson@ascvolvo.com

Billy Brice 678-318-9500 Email: billy.brice@ascvolvo.com

Elon Holley 334-450-7667 Email: elon.holley@ascvolvo.com

ASC has the largest supply of Tier 3 Articulated Trucks in inventory, call for more details. Your VOLVO dealer in The Carolinas • Georgia • East Tennessee North Carolina: Charlotte Raleigh Asheville Greenville

South Carolina: Columbia North Charleston Piedmont

Compactors - Padfoot 2006 INGERSOLL RAND SD122F......$97,000

Compactors - Smooth Drum 2008 VOLVO DD138HF, 1428 Hrs....$128,000 2008 VOLVO DD90HF, 730 Hrs ......$120,000

Excavators - Crawler

2011 Volvo L35ZD, 292 hrs, $78,000

Tennessee: Knoxville Chattanooga

www.ascvolvo.com

VOLVO EC330BLC, 4522 Hrs, $160,000

(7) 2011 Volvo A30F 1259 - 1627 hrs, $402,000 - $414,000

Georgia: Buford Forest Park Savannah

2006 VOLVO EC140B LC, 2422 Hrs ..$84,000 2005 VOLVO EC160B LC, 2705 Hrs $102,000 2008 VOLVO EC160CL, 1607 Hrs ....$138,000 2007 VOLVO EC240CL, 2192 Hrs ....$150,000 2007 VOLVO EC330B LC, 4522 Hrs $160,000 2008 VOLVO EC330CL, 4653 Hrs ....$186,000 2008 VOLVO EC460CL, 5244 Hrs ....$240,000

Excavators - Mini (up to 12,000 lbs) 2008 VOLVO EC55B, 1682 Hrs ........$56,400

(7) 2011 VOLVO A30F, 1387-1906 Hrs ........ ..............................$402,000-$414,000 (3) 2011 VOLVO A35F, 1641-1795 Hrs ........ ......................................$492,000 Ea. 2007 VOLVO A40D, 6625 Hrs ........$288,000 (5) 2008 VOLVO A40E, 4816-6521 Hrs ........ ..............................$315,000-$360,000 (2) 2010 VOLVO A40E, 2154-2732 Hrs ........ ..............................$460,000-$510,000 (11) 2011 VOLVO A40E, 1922-2519 Hrs ...... ..............................$492,000-$510,000 2007 VOLVO A40E FS, 5019 Hrs ....$414,000 (10) 2011 VOLVO A40F, 1163-2817 Hrs........ ..............................$540,000-$588,000 (4) 2007 VOLVO T450D, 1366-2044 Hrs ...... ......................................$300,000 Ea.

2010 VOLVO L90F, 3700 Hrs, New Rubber $150,000

(3) 2011 Volvo A35F, 1442 - 1695 hrs, $492,000

2008 – 2011 (15) Volvo A40E from 1810 hrs, from $315,000

Skid Steers 2006 VOLVO MC110B, 313 Hrs........$34,000

(3) 2010/11 Volvo EW180C, 1052-1930 hrs, $180,000 – 204,000

Excavators - Wheel 2010 VOLVO EW180C, 2034 Hrs ....$180,000 (2) 2011 VOLVO EW180C, 1262-1892 Hrs .... ......................................$204,000 Ea.

Water Equipment - Truck

2007 Volvo A25D, 5400 hrs, New 5000 gallon tank $230,000

2006 VOLVO A30D, 5573 Hrs ........$190,000

Wheel Loaders Motor Graders 2008 VOLVO G940, 1945 Hrs ........$175,000 2009 VOLVO G930, 1030 Hrs ........$210,000

(2) 2011 Volvo L60F, 630-997 hrs, $150,000

2011 Volvo L150G 1614 hrs, $342,000

Off-Highway Trucks 2005 VOLVO A25D, 4977 Hrs ........$190,000 2006 VOLVO A25D, 6682 Hrs ........$185,000 (3) 2011 VOLVO A25F, 1130-1243 Hrs ........ ......................................$348,000 Ea. 2008 VOLVO A30E, 3771 Hrs ........$312,000 (2) 2011 VOLVO A30E, 1702-2013 Hrs ........ ..............................$384,000-$396,000

Volvo Construction Equipment

(2) 2011 VOLVO L20F, 7-111 Hrs $58,800 Ea. (2) 2011 VOLVO L60F, 889-1258 Hrs .......... ......................................$150,000 Ea. 2005 VOLVO L70E, 2623 Hrs ........$107,500 2006 VOLVO L70E, 4225 Hrs ........$108,000 2009 VOLVO L70F, 6474 Hrs ........$126,000 2011 VOLVO L70F, 886 Hrs ..........$168,000 2008 VOLVO L150F, 3173 Hrs........$252,000 (2) 2009 VOLVO L150F, 3121-4068 Hrs........ ..............................$260,000-$264,000 2011 VOLVO L150G, 1632 Hrs ......$342,000 2011 VOLVO L35ZD, 407 Hrs ..........$78,000

(4) 2007 Volvo T450D from 1354 hrs, $300,000

(5) 2008 – 2010 Volvo L150F from 2336 hrs, from $222,000

Page 4 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SOUTHEAST EDITION Circulated Throughout

IN THIS ISSUE SPECIAL SECTION…

MINI & COMPACT EQUIPMENT

Be sure to check out this special section! Keep up to date with the latest information on mini and compact equipment.

FEATURES…

8 12

HIGHLAND TRACTOR CO. HOSTS CUSTOMER APPRECIATION DAY

Highland Tractor had GradeWorks LLC, a construction GPS and site work surveying company, come in and lay out a road, building pad and pond at the back of the property.

RW MOORE, BENCHMARK HOST ANNUAL SKEET SHOOT EVENT

The well-attended Sept. 14. event drew 200 contractors from eastern North Carolina.

Founder, Publisher & CEO Southeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr. Main office

Toll Free Fax Web site Editorial e-mail Advertising e-mail For advertising rates Contact

Toll Free Fax e-mail

ATLANTIC COAST TOYOTALIFT MOVES INTO CHARLOTTE MARKET

Contact

WRIGHT EXPRESS RELEASES MONTHLY CONSTRUCTION FCI RESULTS

Toll Free Fax

SANY BUILDS WORLD’S LARGEST, MOST ADVANCED EXCAVATOR FACTORY IN CHINA

With six employees in the new Charlotte store, ACT’s staff handles everything from sales to aftermarket support.

The Wright Express Construction Fuel Consumption Index indicated an increase of 1.4 percent in July versus its level the previous year.

e-mail Contact

The Lingang Industrial Park has 10.7 million sq. ft. of total space, with 5.9 million sq. ft. of manufacturing space.

U.S. CONSTRUCTION SPENDING FELL 0.9 PERCENT IN JULY

Spending on construction of single-family homes and apartments increased again, a hopeful sign for the modest housing recovery.

‘LADY CRANE, ’ COLLEAGUES CLOSE ONE DOOR, OPEN ANOTHER

The National Wind Technician Organization is able to provide safety training services for all personnel involved in the process of building, maintaining, operating, and managing wind turbines and wind sites.

80 CLASSIFIEDS 82 COMING AUCTIONS 89 BUSINESS CALENDAR

EQUIPMENT… 76 DOOSAN DX140W Wheeled Excavator 77 DOOSAN PORTABLE POWER Mobile Generators

•Alabama •Arkansas •Florida •Georgia •Louisiana •Mississippi •North Carolina •South Carolina •Tennessee •Virginia •Puerto Rico •Virgin Islands Edwin M. McKeon Sr. Richard C. McKeon Craig Mongeau Christine Reckner Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910

www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

Richard C. McKeon •North & South Carolina •Tennessee •Virginia 704/553-8888 800/288-4234 704/553-8899 rmckeon@cegltd.com Rich Olivier •Alabama •Arkansas •Georgia •Mississippi •Tennessee •Florida Panhandle 770/443-3174 800/409-1479 770/443-3176 rolivier@cegltd.com Jim Van Natta •Florida •Virgin Islands •Puerto Rico

Toll Free Fax e-mail

407/365-5720 800/344-3026 407/366-3192 jvannatta@cegltd.com

Contact

Dale Agnew •Louisiana

Toll Free Fax

877/877-4997 972/719-2611 dagnew@cegltd.com

e-mail

Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2012, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 5

QUALITY USED EQUIPMENT AT COMPETITIVE PRICES!

Call Jill Penderghest, Asst. Used Equipment Manager

O: 904.494.1436 | C: 904.803.2909

2008 D5KLGP: SN# YYY00173 — 2000 Hrs., Canopy, LGP Blade.................................$69,500

2007 D5GLGP: SN# RKG03563 — 2,500 Hrs., Canopy, LGP Blade..................................$62,000

2010 928HZ: SN# CXK00608 — 3,500 Hrs., CAB, A/C, GP Bkt................................$120,000

2007 247B2: SN# MTL05114 — 1,850 Hrs., Canopy, GP Bkt...................................$23,500

2005 D3GXL: SN# JMH01586 — 600 Hrs., Canopy,XL Blade, Hours are correct....$40,000

2008 307C: SN# BCM02099 – 2,300 Hrs., CAB A/C, 30” GP Bkt, Thumb, Rubber T racks..$60,000

2008 D3KLGP: SN# LLL00480 — 2,000 Hrs., Canopy, LGP Blade.................................$53,000

2004 Dump Truck: SN# 4DM42354 – 34,000 Mi., Freightliner, 200HPP,, A/C...........................$40,000

2007 1044C-54: SN# 104433223 – 2,000 Hrs., OROPS, 48” Forks...................................$75,000

2007 305CCR: SN# HWJ01921 — 800 Hrs., Canopy, Std Stk, Rubber Tracks.............$37,000

2008 GENIE S60: SN# S60-17998 – 2,500 Hrs., Boom Lift, Diesel..................................... $52,500

2010 D3KLGP: SN# LLL00614 — 1,200 Hrs., Canopy ,LGP Blade................................ $62,000

2010 246C CL2: SN# JAY04428 – 1,100 Hrs., CAB, A/C, 2-Speed, GP Bkt......................$29,000

2009 289C L2: SN# JMP00650 — 1,850 Hrs., Canopy, GP Bkt., LFF,, 2-Spd......................$39,500

2010 GENIE S125: SN# S125-2862 – 1,100 Hrs., Boom Lift, Diesel..................................$157,500

2006 242B CL1: SN# BXM02941 – 1,300 Hrs., Cab, A/C, GP Bkt..................................... $25,000

2007 CS323C: SN# DAR00426 — 276 Hrs., 2011 GENIE TML4000: SN# TML11202 - 850 Hrs., 2008 TL1055: SN# TBM00974 — 2,750 Hrs., Smooth Drum, 6PR Tires.......................$55,000 Light Tower, Trailer Mounted............................$6,000 OROPS, 48” Forks...................................$77,500

2007 National 690: SN# 293402 – 29,000 Mi., 20-TTon Boom, Rear Mount....................$130,000

Browse our complete B l usedd iinventory at used.ringpower.com d i

Page 6 â&#x20AC;˘ October 3, 2012 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

7 BROOKS SALES FOR CASE SERVICE & SALES The Best Parts & Technicians The Best Parts & Technicians for your

SPECIALS from

Skid Steer &â&#x20AC;&#x2C6;CTLâ&#x20AC;&#x2C6;Track Machines are for your Case Skid SteerCase Loaders &Loaders CTL Track Machines at Brooks Sales. They are waiting for you. are at Brooks Sales. They are waiting for you.

Call Jimmy for Service & Brian for Parts.

704-233-4242

800-443-7569

Since 1970

Call Jimmy for Service &â&#x20AC;&#x2C6;Brian for Parts.

704-233-4242 800-443-7569 3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com Hours Mon.-Fri. 7:30am-5:30pm Mon.-Fri. 7:30am-5:00pm Sat. 8am-12pm Sat. 8am-12pm

S O SHOR RING G & SUsource! PPLY Your Complete Rental Resource!

slide rail system

gas monitors

ORLANDO

JACKSONVILLE 2750 Imeson Road Jacksonville, FL 32220 2IĂ&#x20AC;FH 2 IĂ&#x20AC;FH ))D[ D[

YOUR Y OUR O COMPLETE COMPLET TE E RENTAL R RENT ENTAL RESOURCE RESOURCE

HKK

TAMPA

7532 Malta Lane Tampa, FL 33637 2IĂ&#x20AC;FH 2 IĂ&#x20AC;FH ))D[ D[

STK# CU3583, ANGLE BLADE, 36â&#x20AC;? BKT, 496 HRS $34,500

Other Supplies:

HKK

11128 Boggy Creek Rd Orlando, FL 32824 2 IĂ&#x20AC;FH 407-854-9949 2IĂ&#x20AC;FH ))D[ D[

2008 KUBOTA U645

STK# CU3586, CAB, HEAT, A/C, 80â&#x20AC;? TOOTH BKT, 1040 HRS $32,000

2007 CASE SV208PD, STK# CE4364, 66â&#x20AC;? PAD FOOT ROLLER, 399 HRS ..........................................$49,000 2006 CASE 850K, STK# CE4152, CAB, A/C, 24â&#x20AC;?SHOES, 120â&#x20AC;?BLADE, 1817 HRS ..................................$59,500 2006 CASE CX210, STK# CE4177, A/C, THUMB, PLUMBING, 42â&#x20AC;?BKT., 3145 HRS ....................$78,000 2000 DEERE 555G LOADER, STK# RM8060, 4 IN 1 BKT, GOOD GROUND WORK ..................................$21,500 2006 CASE 580M, STK# CE4271, 2WD, TURBO, OROPS, STD. HOE, 24â&#x20AC;? BKT, 695 HRS ..........$39,000 2007 CASE 580M, STK# CE4360, 2WD, OROPS, KENT HAMMER, 445 HRS ........................................$63,000 4:28 P 2006 TAKEUCHI TL150, STK# KA0648, OROPS, 80â&#x20AC;? TOOTH BKT, NEW TRACKS, 1975 HRS ..........$27,500 2005 HAMM 3307, STK# CU3587, 66â&#x20AC;? SMOOTH DRUM, 797 HRS ............................................$37,500 1992 CASE 850E, STK# CU3577, 20â&#x20AC;?PM SHOES, GOOD 4:28 GROUND WORK, 3093 HRS ..........................$19,500 1999 CASE 550G, STK# RM8070, 16â&#x20AC;? SHOES, GOOD GROUND WORK, 2275 HRS ..........................$22,500 2010 TAKEUCHI TB235, STK# KA0834, WARRANTY, THUMB, 18â&#x20AC;? QC BKT, 219 HRS ......................$36,000 2002 CASE 580M, STK# CU3584, 4WD, CAB, A/C, ESTICK, 24â&#x20AC;? BKT, 2289 HRS ............................$39,000 2007 TAKEUCHI TL130, STK# CU3545, CAB, HEAT, A/C, 67â&#x20AC;? SMOOTH BKT, 745 HRS ..................$26,500 2003 TAKEUCHI TL150, STK# CU3564, CAB, HEAT, A/C, 80â&#x20AC;? TOOTH BKT, 2870 HRS ....................$27,500 2008 TAKEUCHI TL140, STK# KA0791, WARRANTY, OROPS, 76â&#x20AC;? TOOTH BKT, 589 HRS ................$34,500

PRO OFESSION FESSIO SS ONALL

steel trench shield

2006 TAKEUCHI TL150

Â&#x2021; manhole shields Â&#x2021; build-a-boxâ&#x201E;˘ Â&#x2021; quicksheetâ&#x201E;˘ guideframe Â&#x2021; blowers/hoses Â&#x2021; fall protection

CONTACT Rick Marsh â&#x20AC;˘ (540) 220-4333 Suffolk, VA Manassas, VA A message from the NBA and its players

Equipment q p Distributor ;/052 ) @6<:7,(2 *64

Fredericksburg, VA Ashland, VA

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 7

Page 8 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Highland Tractor Co. Hosts Customer Appreciation Day

Chuck Counts, president of GradeWorks LLC, explains the grade control system to the operator of the John Deere 672GP.

ighland Tractor Co. hosted a customer appreciation day on Sept. 13 at its main office in Ocala, Fla. The event gave visitors the opportunity to view and try out various pieces of equipment including a grader and a dozer equipped with a Topcon 3D MC2 blade control system. Highland Tractor had GradeWorks LLC, a construction GPS and site work surveying company, come in and lay out a road, building pad and pond at the back of the property. Contractors were able use the John Deere 650K dozer and 672GP motorgrader equipped with the 3d MC2 blade control system to cut the road and building pad to grade. In addition to the full John Deere construction and forestry line, Highland Tractor also represents Hitachi excavators and Bomag compaction equipment. The home office is in Ocala and there is a branch in Chiefland, Fla. For more information, call 888/711-0142 or visit www.highlandtractor.com.

The John Deere 650K with grade control is starting to carve out the lake.

Taking the equipment out on the work site.

The John Deere and Hitachi excavator display drew a crowd.

Discussing the attributes of the JD672GP grade control system.

This JD 644K got a workout from a potential buyer.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 9

Page 10 â&#x20AC;˘ October 3, 2012 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

We a are re tth the he NEW National Nat Na attio ion nal B Bo Boom oom TTr Truck ruc ucckk De Dealer ea ale ler iin Ge G Georgia! eo orrg gia ia! Ring Power Crane offers premier machines from Americaâ&#x20AC;&#x2122;s leading crane manufacturers, including Manitowoc, Grove, National Crane, Broderson, Manitex and Badger Equipment Company, and serves from the southeastern United States to the Caribbean and Latin America.

NEW UNITS

IN STOCK UNION CITY, GA

WANTED: LATE MODEL USED CRANES! All Brands Considered. +%)4( 35--%2,). /FlCE s #ELL

FLORIDA St. Augustine 904.737.7730

Pompano Beach

Tampa/Orlando

Miami (International Sales)

GEORGIA Union City 770.774.7300

WE PERFORM ANNUAL CRANE INSPECTIONS! N EW & USED USED SALES Â&#x2021; REN RVICE NEW RENTALS TALS Â&#x2021; P PARTS ARTS Â&#x2021; SE SERVICE

NORTH CAROLINA Concord 704.795.3636

SOUTH CAROLINA Ladson

RingPowerCrane RingPowerCrane.com .com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 11

Page 12 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RW Moore, Benchmark Host Annual Skeet Shoot Event

John Caraway (L), Caraway Logging, New Bern, N.C., and Dan Moore talk a little business between events.

When asked how the shooting went Walter Hudson (L) and John Patrick, both of Sullivan Eastern Inc., Durham, N.C., both said they were having an enjoyable day that sure beat sitting in the office.

(L-R): Tony Jackson, RW Moore Equipment Company; Matthew Paul, Cieszko Construction, Havelock, N.C.; and Dan Moore chat about the annual event.

W Moore Equipment Company and Benchmark Tool & Supply held a joint skeet shooting customer appreciation event at Drakes Landing, the premier hunting preserve in Fuquay Varina, N.C. The well-attended Sept. 14. event drew 200 contractors from eastDemonstrating the Topcon RL-H4C rotating laser are ern North Carolina. Tracy Skipper (L) and Mike Gaillard, both of Benchmark Tool & Supply. Drakes Landing has many shooting points offering various situations that mimic an actual hunting experience as well as real hunts such as quail and western style pheasant. RW Moore and Benchmark had a number of John Deere machines on hand for customers to try out. Several of them were equipped with laser and GPS systems to help the user move the dirt precisely. see SKEET page 62

Troy Mitchell, Waste Industries, Apex, N.C., blasted the clay out of the sky with his Remington over and under 12 gauge.

Jason Barber, Carolina Excavator Services, Raleigh, N.C., saw the direct benefits of increased production when a machine is equipped with a Topcon device.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 13

M.D. MOODY SONS &

SINCE 1913

New Website www.mdmoody.com Coming Soon!

PARTS

JACKSONVILLE, FL 32207 904-737-4401 • Fax: 904-636-0532 Se Habla Espa~ nol

INC.

Page 14 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ph. 770-949-9231 • Fax: 770-947-9916

The SEAL SAVER* WILL: • Eliminate rod scoring • Extend the life of cylinder seals • Protect cylinders from the elements • Prevent pitting due to chemical washes • Reduce particle contamination of hydraulic systems • Minimize dings and dents associated with falling debris *Patented

SEAL SAVER has proven effective in Recycling, Construction, Mining, Rock Quarries, Waste Management, Refineries, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. Made in the USA

1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com for more information or contact us at 1-800-683-5189

STATEMENT OF OWNERSHIP, MANAGEMENT AND CIRCULATION Required by 19 USC 3685 Title of publication: CONSTRUCTION EQUIPMENT GUIDE SOUTHEAST EDITION; Publication Number: 1058-6474; Date of filing: Sept. 25, 2012; Frequency: Bi-weekly, 26 issues annually; Annual Subscription price: $65.00; Complete mailing address of known office of publication: 470 Maryland Dr., Ft. Washington, PA 19034; Publisher’s general business office: 470 Maryland Dr., Ft. Washington, PA 19034; Publisher’s name and address: Richard McKeon, 6060 Piedmont Row Dr. South Ste 555, Charlotte, N.C. 28210; Editor in Chief: Craig Mongeau, 470 Maryland Dr., Ft. Washington, PA 19034; Owner: CONSTRUCTION EQUIPMENT GUIDE SOUTHEAST EDITION, 6060 Piedmont Row Dr. South Ste 555, Charlotte, N.C. 28210; Edwin M. McKeon Jr., 470 Maryland Dr., Ft. Washington, PA 19034; Joseph McKeon, 5875 N. Lincoln Ave. Suite 227, Chicago, IL 60659; Richard McKeon, 6060 Piedmont Row Dr. South Ste 555, Charlotte, N.C. 28210; Known bondholders, mortgages, and other security holders: None, Issue date for circulation data below 9/19/12; Extent of circulation (Average number of copies during preceding 12 months): Net press run 20,308; paid circulation through agents 0; through mail subscription 20,044; free distribution 0; total distribution 20,044; copies not distributed 264; return from news agents 0; Total 20,308; Percent Paid and/or Requested Circulation 100%; Actual number of copies for issue published nearest to filing date: Net press run 22,380; paid circulation through agents 0; through mail subscription 22,105; free distribution 0; total distribution 22,105; copies not distributed 275; return from news agents 0; Total 22,380; Percent Paid and/or Requested Circulation 100%. I certify that the above statements made by me are correct and complete. /s/ Edwin M. McKeon, Jr., President/CEO

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 15

Page 16 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Atlantic Coast Toyotalift Moves Into Charlotte Market By Cindy Riley CEG CORRESPONDENT

Since opening its new location in Charlotte, N.C., in June 2012, Atlantic Coast Toyotalift’s mission has been clear. “We want to be a premier dealer of quality compact equipment and accessories,” explained Patrick Cudicio, regional operations manager of ACT Construction Equipment. “Charlotte remains one of the most robust markets in North Carolina. As a result, it provides our dealership with the perfect opportunity to expand and grow by offering our line of quality products and services. Takeuchi, our line of compact track loaders and excavators, has a proven record of manufacturing top-notch equipment. We have been very successful with Takeuchi and are excited to enter the Charlotte region with them.” With six employees in the new Charlotte store, ACT’s staff handles everything from sales to aftermarket support. The full-service dealership provides sales, service, parts and rentals. Besides Takeuchi, it carries a professional line of Stihl products, aerial work platforms by JLG and Absolute EZ-Up and Chicago Pneumatic construction equipment and tools. For excavator and loader machines the business also offers a variety of buckets and attachments manufactured by CID, Loflin and Fecon. “Our customers are entrepreneurs — big and small,” said Cudicio, who oversees operations in eastern North Carolina, as well as in the Charlotte area. “We see everyone from plumbers, landscapers, mulch and stone suppliers, builders of retention walls and pools to residential, commercial or civil contractors and anyone else who needs to dig or move dirt. However, we tend to work

(L-R) are Jay Williford, president, Robert Wallace, Patrick Cudicio, Mike Hilliard and Avery Hill.

closely with that niche of the market that feels underserved by the larger, big name dealerships. Building a relationship with the owner/operator of a company who depends on others for their success can be really rewarding.” According to Cudicio, customer service and quality merchandise are crucial to success at the company. “Products that are reliable year after year keep customers profitable. However, cus-

The company has a number of new Takeuchi excavators and track loaders on the Charlotte yard ready to go for its customers.

tomer service keeps them coming back. It’s more than just having something available when they need it or fixing it the first time, every time. It has more to do with building lasting relationships and maintaining effective honest communication. It’s the execution of customer service that makes up our culture at ACT. “Our short-term goals are encapsulated by the single premise — to build relationships. We want to go out and make face-to-face contacts and begin inroads towards a business cycle that revolves around sales, service, parts and rentals. Our goal is to get our message out regarding who and what we are about, and the advantages ACT brings to the marketplace. Our long-term goal is simple in that we don’t measure our success against any other industry or competitor, nor do we gauge our success purely on a balance sheet. We are successful when we are recognized for what we are, which is a high-quality company that offers value-added products and services.” Seeing things from the customers’ point of view is one thing that the team at ACT takes a lot of pride in. “Each and every person at ACT is passionate about one thing, and that’s helping make someone’s situation better. At ACT we understand that the customer calling is not happy that they need a part, or that they need a service technician to fix their machine sitting in a half dug out foundation. They have a problem that needs to be resolved, and usu-

ally sooner than later. A panicked foreman looking at missing a deadline becomes a loyal repeat customer when you get him out of that jam. The passion for our work stems from remedying an issue and getting machines and people back to work.” Another aspect of customer relationships emphasized at ACT is not just being a business in any given place, but being a business that understands the community and its needs as well. “We are an established company with a long history of providing experience based solutions,” added Cudicio. “Though we may be new to the Charlotte region, we have been in business for more than 40 years and have been, and remain, affiliated with many of the top brand names in the industry. Furthermore, we have a proven track record and are not going anywhere. Our aim is to be a member of the community for a long time. We understand how hard business is today, and more so how hard the past few years have been. We strive hard to provide sound, fast solutions when a machine is down or when more equipment is needed to complete a job. We are ready to implement creative solutions to challenges while maintaining the highest level of teamwork and integrity.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 17

866-532-9023 www.clevelandbrothers.com Email: smasisak@clevelandbrothers.com Equipment Located In Pennsylvania, & West Virginia

2006 JLG 400S, SN# 0300096897, ID# X01118, Boom Lift, 4 wheel drive, Basket, 2 piec boom, tires @ 2301hrs 85%, 2301 Hrs ..$25,000 AUGER ATTACHMENT

TORO / DINGO TDAUGER, Serial # 280000478, ID # AU285, Auger Toro Dingo, HIGH TORQUE POWER HEAD..................................$920 AIR COMPRESSOR

2008 SULLAIR 185CFM, Serial # 200803190066, ID # X080010, 1495 Hours, Air Compressor, CAT diesel engine ....................$7,800 AUGER BITS

TORO / DINGO TDAUBIT12, Serial # 12AUBIT290, ID # AU290, 12” Auger Bit Toro ..........................................................................$115 TORO / DINGO TDAUBIT18, Serial # 18AUBIT291, ID # AU291, 18” Auger Bit Toro ..........................................................................$115 TORO / DINGO TDAUBIT6, Serial # 250000176, ID # AU287, 6” Auger Bit Toro..................................................................................$115 TORO / DINGO TDAUBIT9, Serial # 260000170, ID # AU288, 9” Auger Bit Toro Dingo......................................................................$115 AUGER EXTENSION

TORO / DINGO TDAUEX12, Serial # 12AUEX293, ID # AU293, 24” Auger Extension Toro ........................................................................$58 BACKHOES

2010 CATERPILLAR 420E IT, Serial # 0DAN00450, ID # 100378, 940 Hours, Backhoe, 4x4, Erops, A/C ....................................$71,900 2010 CATERPILLAR 420E IT, Serial # 0DAN00158, ID # 100790, 2072 Hours, Backhoe, 4x4, Erops, A/C ..................................$67,000 2010 CATERPILLAR 420E IT, Serial # 0PHC00893, ID # 090259A, 205 Hours, Backhoe, 4X4, Erops, A/C, Aux. hyd. Auto shift, tire @ 205hrs 95-99% ........................................................................$80,000 2011 CATERPILLAR 420E ST, Serial # 0DJL00730, ID # 100381, 544 Hours, Backhoe, 4x4, Erops, A/C ....................................$78,900 2010 CATERPILLAR 420E ST, Serial # 0DJL00669, ID # 100690, 522 Hours, Backhoe, 4x4, Erops, A/C ....................................$68,900 2010 CATERPILLAR 420E ST, Serial # 0DJL00401, ID # 100846, 780 Hours, Backhoe, 4x4, Erops, A/C ....................................$67,800 BEDS

CATERPILLAR 771BED, Serial # U771DBEDMS1449, ID # MS1449, 771 Bed ......................................................................$8,689 CATERPILLAR 773BED, Serial # U773BEDMS1826, ID # MS1826, 773 Bed........................................................................................$9,711 BLADES

CATERPILLAR 690BLADE, Serial # U690BLADEBL215, ID # BL215, 690 Blade group - Part #BD690U22 ............................$7,156 CATERPILLAR D10BLADE, Serial # UD10NBLADEBL217, ID # BL217, D10N SU BLADE, PART #9W2246 ..............................$5,622 CATERPILLAR D4BLADE, Serial # D4BLADEBL51, ID # BL51, D4G XL Blade ..........................................................................................$920 CATERPILLAR D6BLADE, Serial # 0S1D00045, ID # BL241, D6K Foldable Blade ............................................................................$1,150 CATERPILLAR D6NBLADE, Serial # UD6NBLADEBL288, ID # BL288, D6N BLADE....................................................................$1,022 CATERPILLAR D7BLADE, Serial # UD7BLADEBL287, ID # BL287, D7R BLADE, SU..............................................................................$511 CATERPILLAR D8BLADE, Serial # UD8BLADEBL519, ID # BL519, CAT D8 U BLADE, MOLDBOARD ONLY, SINGLE TILT, SPILL GAURD ....................................................................................................$11,244 CATERPILLAR D9RBLADE, Serial # UD9RBLADEBL251, ID # BL251, D9R U BLADE..............................................................$11,244 1900 CATERPILLAR MISC ITEMS, Serial # U563BLADEBL10, ID # BL10, CS563 BLADE ..................................................................$716 BOLT ON EDGE

MISCELLANEOUS OTHER MISC ITEMS, Serial # MS824, ID # MS824, Rezloh 81.5” bolt on Razor Edge ....................................$288 BOOM LIFTS

2007 JLG 400S, Serial # 0300110435, ID # 270455, 1630 Hours, Boom Lift, 4 wheel drive, Basket, 2 piec boom, tires @ 1630hrs 85% ....................................................................................................$29,000 2006 JLG 400S, Serial # 0300096897, ID # X01118, 2301 Hours, Boom Lift, 4 wheel drive, Basket, 2 piec boom, tires @ 2301hrs 85% ....................................................................................................$25,000 2006 JLG 400S, Serial # 0300097260, ID # X01122, 1690 Hours, 40’ Lift ........................................................................................$25,000 2005 JLG 400S, Serial # 88051, ID # X00867, 2124 Hours, 40’ Lift ....................................................................................................$23,900

See next page for more listings 1900 ENTEK 31536, SN# 10713, ID# EB66, 315 36” Entek coupler bucket ..............................................................................................$1,725

Low-Hour Rental Fleet Roll Out 2005 JLG 450AJ, Serial # 88287, ID # X00881, 2027 Hours, 45’ Lift ..............................................................................................$26,000 2007 JLG 460SJ, Serial # 0300111262, ID # 270540, 1546 Hours, 46’ Lift ........................................................................................$37,500 2006 JLG 460SJ, Serial # 0300099247, ID # X01131, 1031 Hours, 46’ Lift ........................................................................................$35,000 2005 JLG 460SJ, Serial # 0300087868, ID # X00890, 1992 Hours, 46’ Lift ........................................................................................$29,900 2005 JLG 460SJ, Serial # 88298, ID # X00888, 1916 Hours, 46’ Lift ....................................................................................................$29,900 2005 JLG 460SJ, Serial # 87888, ID # X00891, 1904 Hours, 46’ Lift ..............................................................................................$29,900 BRACKETS

ALLU 304BRKTALL, Serial # BRK651, ID # BRK651, Allu Mini Exc Mounting Bracket............................................................................$288 ALLU 330BRKTALL, Serial # B52812, ID # BRK609, Allu D Linkage Mounting Bracket............................................................................$920 ALLU 330BRKTALL, Serial # B52811, ID # BRK610, Allu D Linkage Mounting Bracket............................................................................$920 ALLU 330BRKTALL, Serial # B52813, ID # BRK606, Pin On S Series, Allu D Linkage mounting bracket......................................$920 ALLU 330BRKTALL, Serial # 000B52810, ID # BRK612, Pin on S Series, Allu DB Linkage mounting bracket................................$1,200 ALLU 330BRKTALL, Serial # BRK663, ID # BRK663, Pin on S Series, Allu DB Linkage mounting bracket................................$1,200 ALLU 330BRKTALL, Serial # BRK665, ID # BRK665, Pin on S Series, Allu DB Linkage mounting bracket....................................$920 CATERPILLAR 301BRKT, Serial # 147-6627BRK533, ID # BRK533, 301 H45 Bracket..............................................................................$229 2002 CATERPILLAR 302BRKT, Serial # 155-4468/220184, ID # 220184, 302 H50 Bracket ..............................................................$288 2002 CATERPILLAR 302BRKT, Serial # 155-4468/220185, ID # 220185, 302 H50 Bracket ..............................................................$288 2005 CATERPILLAR 303BRKT, Serial # 168-8703/251060, ID # 251060, 303 H63 Bracket ..............................................................$336 2005 CATERPILLAR 303BRKT, Serial # 000251080, ID # 251080, 303 H63 Bracket..............................................................................$558 2005 CATERPILLAR 303BRKT, Serial # 000251084, ID # 251084, 303 H63 Bracket..............................................................................$575 2004 CATERPILLAR 303BRKT, Serial # 168-8698/241278, ID # 241278, 303 H63 Bracket ..............................................................$575 2003 CATERPILLAR 303BRKT, Serial # 168-8703/230933, ID # 230933, 303 H63 Bracket ..............................................................$336 CATERPILLAR 303BRKT, Serial # 168-8698BRK175, ID # BRK175, 303 H50 Bracket..............................................................................$336 CATERPILLAR 303BRKT, Serial # 168-8703BRK503, ID # BRK503, 303 H50 Bracket..............................................................................$353 CATERPILLAR 303BRKT, Serial # 168-8698BRK504, ID # BRK504, 303 H63 Bracket..............................................................................$353 2007 CATERPILLAR 304BRKT, Serial # 277-8941270901, ID # 270901, 304C/305C H63 Hammer Top........................................$288 2006 CATERPILLAR 304BRKT, Serial # 000260201, ID # 260201, 304/305 CVP16 Bracket ................................................................$288 2004 CATERPILLAR 304BRKT, Serial # 000241831, ID # 241831, 304/305 CVP16 Bracket ................................................................$288 2004 CATERPILLAR 304BRKT, Serial # 000241538, ID # 241538, 304/305 H63 Bracket......................................................................$288 2003 CATERPILLAR 304BRKT, Serial # 000231013, ID # 231013, 304/305 H63 Bracket......................................................................$288 2001 CATERPILLAR 304BRKT, Serial # 000210249, ID # 210249, 305/305 H63 Bracket......................................................................$288 CATERPILLAR 304BRKT, Serial # 168-8710230342, ID # 230342, 304/305 H63 Bracket......................................................................$288 CATERPILLAR 304BRKT, Serial # 277-8941BRK291, ID # BRK291, 304/305 H63 Bracket......................................................................$288 CATERPILLAR 304BRKT, Serial # 277-8941BRK290, ID # BRK290, 304C/305C H63 Hammer Top ......................................................$288 CATERPILLAR 304BRKT, Serial # 304BRKTBRK493, ID # BRK493, 304C/305C H63 Hammer Top ......................................................$288 CATERPILLAR 304BRKT, Serial # 265-7461BRK687, ID # BRK687, 304C/305C Swivel CVP16 Plate - Still need mounting bracket..$288 CATERPILLAR 304BRKT, Serial # 226-7696BRK505, ID # BRK505, Bracket for hammer ........................................................................$288 2010 CATERPILLAR 307BRKT, Serial # 7Q-8466BRK653, ID # BRK653, 307/308 H70-H90,CVP40 Bracket................................$288 CATERPILLAR 307BRKT, Serial # 7Q-8466BRK309, ID # BRK309, 307C/308C Bracket - H70-H90, CVP40)......................................$288

www.clevelandbrothers.com

2004 CATERPILLAR 315BRKT, Serial # 000240388, ID # 240388, 315 Hammer Top ............................................................................$575 2003 CATERPILLAR 315BRKT, Serial # 000230980, ID # 230980, 315 Hammer Top ............................................................................$575 CATERPILLAR 315BRKT, Serial # 129-1545BRK138, ID # BRK138, 315C Bracket - H100-H120, CVP75 ............................................$575 CATERPILLAR 318BRKT, Serial # 319BRKTBRK677, ID # BRK677, B Linkage bracket to pick up allied 1600 compactor....................$575 CATERPILLAR 318BRKT, Serial # 112-5537BRK223, ID # BRK223, H115-H130, CVP75 (B Linkage) ..................................................$575 CATERPILLAR 318BRKT, Serial # 112-5537BRK568, ID # BRK568, H115-H130, CVP75 (B Linkage) ..................................................$575 CATERPILLAR 320BRKT, Serial # 112-5537BRK420, ID # BRK420, B Linkage Bracket............................................................................$575 CATERPILLAR 320BRKT, Serial # 112-5537BRK424, ID # BRK424, B Linkage Bracket............................................................................$575 CATERPILLAR 320BRKT, Serial # 112-5537BRK613, ID # BRK613, B Linkage Bracket............................................................................$575 CATERPILLAR 320BRKT, Serial # 112-5537BRK715, ID # BRK715, Mounting Bracket B ........................................................................$575 CATERPILLAR 320BRKT, Serial # 112-5537BRK778, ID # BRK778, Mounting Bracket B ........................................................................$575 CATERPILLAR 322BRKT, Serial # 128-4341BRK216, ID # BRK216, H120-H140, CVP110 - S Linkage ................................................$288 CATERPILLAR 322BRKT, Serial # 128-4341BRK217, ID # BRK217, H120-H140, CVP110 - S Linkage ................................................$288 CATERPILLAR 322BRKT, Serial # 128-4341BRK218, ID # BRK218, H120-H140, CVP110 - S Linkage ................................................$288 CATERPILLAR 322BRKT, Serial # 128-4341BRK23, ID # BRK23, H120-H140, CVP110 - S Linkage ................................................$288 CATERPILLAR 322BRKT, Serial # 128-4341BRK45, ID # BRK45, H120-H140, CVP110 - S Linkage ................................................$288 CATERPILLAR 322BRKT, Serial # 128-4341BRK538, ID # BRK538, H120-H140, CVP110 - S Linkage ................................................$288 CATERPILLAR 324BRKT, Serial # 251-0068BRK704, ID # BRK704, CB Linkage Bracket ........................................................................$288 CATERPILLAR 324BRKT, Serial # 251-0068BRK713, ID # BRK713, CB Linkage Bracket ........................................................................$288 CATERPILLAR 324BRKT, Serial # 251-0068BRK714, ID # BRK714, CB Linkage Bracket ........................................................$288 CATERPILLAR 324BRKT, Serial # 251-0068, ID # BRK745, CB Linkage Bracket ..............................................................................$288 CATERPILLAR 324BRKT, Serial # 251-0068BRK746, ID # BRK746, CB Linkage Bracket ........................................................................$288 CATERPILLAR 324BRKT, Serial # 1124833-BRK360, ID # BRK360, CVP110 - C Linkage ......................................................................$288 CATERPILLAR 324BRKT, Serial # 251-0068BBRK591, ID # BRK591, H115-H140, CVP110 (CB Linkage)..............................$288 CATERPILLAR 325BRKT, Serial # U325BRKTBRK885, ID # BRK885, 325 C-linkage bracket ....................................................$716 CATERPILLAR 325BRKT, Serial # 251-0068BRK384, ID # BRK384, CB Linkage Bracket ........................................................................$460 CATERPILLAR 325BRKT, Serial # 325BRK337, ID # BRK337, CVP110 - C Linkage ......................................................................$460 CATERPILLAR 325BRKT, Serial # 112-4833BRK520, ID # BRK520, H115-H140, CVP110 (C Linkage) ................................................$460 CATERPILLAR 325BRKT, Serial # 112-4833BRK589, ID # BRK589, H115-H140, CVP110 (C Linkage) ................................................$460 CATERPILLAR 330BRKT, Serial # 241-3471BRK207, ID # BRK207, C Linkage Bracket, H160, 330C Linkage for short reach application.... ..........................................................................................................$460 CATERPILLAR 330BRKT, Serial # 251-4647BRK370, ID # BRK370, DB Bracket ......................................................................................$460 CATERPILLAR 330BRKT, Serial # 251-4647BRK541, ID # BRK541, DB Bracket ......................................................................................$460 CATERPILLAR 345BRKT, Serial # 241-3471BRK564, ID # BRK564, H160 - C Linkage............................................................................$920 CATERPILLAR 345BRKT, Serial # 255-7552BRK235, ID # BRK235, H160-H180 TB Linkage Bracket ....................................................$920 CATERPILLAR 345BRKT, Serial # 255-7552BRK260, ID # BRK260, H160-H180 TB Linkage Bracket ....................................................$920 CATERPILLAR 345BRKT, Serial # 255-7552BRK234, ID # BRK234, TB Linkage Mounting Bracket........................................................$920 2007 CATERPILLAR BHLBRKT, Serial # 00MS00233, ID # 261746, 307C Bracket....................................................................$173 2003 CATERPILLAR BHLBRKT, Serial # 230839, ID # 230839, BHL Top for CVP40 ........................................................................$173 CATERPILLAR BHLBRKT, Serial # 251-4624BRK159, ID # BRK159, 446D H100 Bracket ........................................................$173

866-532-9023

CATERPILLAR BHLBRKT, Serial # BHLBRKT-BRK559, ID # BRK559, BHL Auger Mounting Bracket ........................................$173 CATERPILLAR BHLBRKT, Serial # BHLDBRKT-BRK631, ID # BRK631, BHL Swivel Bracket ........................................................$173 CATERPILLAR BHLBRKT, Serial # 231-5149BRK230, ID # BRK230, BHLD/E Bracket - CVP40 Swivel ..................................$173 CATERPILLAR BHLBRKT, Serial # 311-2599BRK655, ID # BRK655, BHLD/E Bracket - H70-H90, CVP40 Swivel ................$173 2007 CATERPILLAR BHLBRKTW, Serial # 270635, ID # 270635, 307C/416-420D Hammer Top ......................................................$173 2006 CATERPILLAR BHLBRKTW, Serial # 000260780, ID # 260780, 307C/416-420D Hammer Top........................................$173 2006 CATERPILLAR BHLBRKTW, Serial # 000260952, ID # 260952, 307C/416-420D Hammer Top........................................$173 2005 CATERPILLAR BHLBRKTW, Serial # 000250811, ID # 250811, 307C/416-420D Hammer Top........................................$173 2005 CATERPILLAR BHLBRKTW, Serial # 000250813, ID # 250813, 307C/416-420D Hammer Top........................................$173 2005 CATERPILLAR BHLBRKTW, Serial # 000250817, ID # 250817, 307C/416-420D Hammer Top........................................$173 2004 CATERPILLAR BHLBRKTW, Serial # 000240289, ID # 240289, 307C/416-420D Hammer Top........................................$173 CATERPILLAR BHLBRKTW, Serial # 209-3306240289A, ID # 240289A, BHL Pin Lock Bracket....................................................$173 CATERPILLAR SSBRKTA, Serial # 0BRK00699, ID # BRK699, SSL Auger Bracket ..................................................................................$115 CATERPILLAR SSBRKTH, Serial # 269-7807BRK143, ID # BRK143, SSL H55/H65 Bracket ....................................................$115 CATERPILLAR SSBRKTH, Serial # 269-7807BRK478, ID # BRK478, SSL H55/H65 Bracket ....................................................$115 CATERPILLAR SSBRKTH, Serial # 269-7807BRK484, ID # BRK484, SSL H55/H65 Bracket ....................................................$115 CATERPILLAR SSBRKTH, Serial # 0BRK00633, ID # BRK633, SSL H55/H65 Bracket ............................................................................$115 JOHN DEERE MISC ITEMS, Serial # JD370-BRKT, ID # BRK552, JD 370 Bracket................................................................................$345 MISCELLANEOUS OTHER MISC ITEMS, Serial # JCBBRKTBRK313, ID # BRK313, Rocky Mountain JCB160 Bracket for CVP75 ..........................................................................................................$345 BROOMS

2011 CATERPILLAR BA18H, Serial # 0AZN03472, ID # BR255, Hyd Angle Broom........................................................................$3,450 2011 CATERPILLAR BA18H, Serial # 0AZN03441, ID # BR256, Hyd Angle Broom........................................................................$3,450 CATERPILLAR BP15B, Serial # 0MPB01063, ID # BR97, SSL Pick Up Broom ....................................................................................$2,300 CATERPILLAR BP18B, Serial # 0DBP01630, ID # BR267, SSL Pick Up Broom ....................................................................................$3,200 CATERPILLAR SA30, Serial # 0H1W00175, ID # BR235, Angle Broom for Fusion w/wtr ..............................................................$7,475 2010 CATERPILLAR THTB, Serial # 000100406, ID # BM23, Telehandler Truss Boom ................................................................$920 2010 CATERPILLAR THTB, Serial # 000100412, ID # BM24, Telehandler Truss Boom ................................................................$920 2010 CATERPILLAR THTB, Serial # THTB-BM25A, ID # BM25, Telehandler Truss Boom ................................................................$920 2010 CATERPILLAR THTB, Serial # THTB-BM27A, ID # BM27, Telehandler Truss Boom ................................................................$920 2009 CATERPILLAR THTB, Serial # THTBBM15, ID # BM15, Telehandler Truss Boom ................................................................$920 CATERPILLAR THTB, Serial # 000254227, ID # BM29, Telehandler Truss Boom......................................................................................$920 CATERPILLAR THTB, Serial # 000254226, ID # BM30, Telehandler Truss Boom......................................................................................$920 CATERPILLAR THTB, Serial # 000254224, ID # BM32, Telehandler Truss Boom......................................................................................$920 CATERPILLAR THTB, Serial # 000254223, ID # BM33, Telehandler Truss Boom......................................................................................$920 MAJOR EQUIPMENT 908BA, Serial # 159333, ID # 270842, 906/908 Pick Up Broom ............................................................$4,025 BUCKETS

2010 ALLU SMH3-12-25, Serial # 10H312001, ID # BU1371, Allu Bucket - Drums Worn - fits 46-56,000 lb Excavator ................$8,000 CATERPILLAR 30109, Serial # 3019EB1493, ID # EB1493, 9” 301 Digging Bucket................................................................................$575 CATERPILLAR 30428, Serial # 30428EB273, ID # EB273, 304CR/305CR Digging Bucket......................................................$575

CATERPILLAR 30436, Serial # U30436EB2252, ID # EB2252, 304CCR 36” Bucket........................................................................$256 CATERPILLAR 31230, Serial # 31230EB239, ID # EB239, 312/314 30” HDR Bucket ..........................................................................$1,725 CATERPILLAR 31230, Serial # U31230EB1804, ID # EB1804, 314 30” Bucket ......................................................................................$511 CATERPILLAR 31236, Serial # U31236EB1637, ID # EB1637, 312 36” Bucket....................................................................................$1,000 CATERPILLAR 31236, Serial # U31236EB1988, ID # EB1988, 312 36” Bucket ......................................................................................$800 CATERPILLAR 31436, Serial # U31436BU2112, ID # BU2112, 314 36” Bucket....................................................................................$1,000 CATERPILLAR 31542, Serial # U31542EB1839, ID # EB1839, 315 42” Bucket....................................................................................$1,500 CATERPILLAR 31542, Serial # U31542EB2520, ID # EB2520, 315 42” Bucket....................................................................................$1,200 CATERPILLAR 31548, Serial # 84EX00097A, ID # EB1604, 315 48” bucket....................................................................................$1,725 CATERPILLAR 31824, Serial # U31824BU1666, ID # BU1666, 318 24” Bucket, B linkage..................................................................$1,000 CATERPILLAR 31830, Serial # 0W2F00111, ID # BU695, 318 30” HD bucket, B Linkage..................................................................$1,000 CATERPILLAR 31830, Serial # 0Z1K17383, ID # BU1618, 318/319 30” HD bucket ................................................................................$575 CATERPILLAR 31830, Serial # WAT014043, ID # BU1619, 318/319 30” HD bucket..................................................................$575 CATERPILLAR 31842, Serial # 0W2F00227, ID # BU922, 318 42” HD bucket, B Linkage..................................................................$1,200 CATERPILLAR 31848, Serial # U31848BU1507, ID # BU1507, 318 48” Bucket, B linkage..................................................................$1,500 CATERPILLAR 32024, Serial # “C041317A1-24”“BKT”, ID # C041317A1, 320 24” bucket, Fits 318C/320C ESCO ..............$1,000 CATERPILLAR 32030, Serial # 0WAT11676, ID # BU1341, 30” HDR Bucket ..........................................................................................$1,200 CATERPILLAR 32054, Serial # U32054BU1825, ID # BU1825, 320 54” Bucket, B linkage..................................................................$3,000 1900 CATERPILLAR 32224, Serial # N32224AR58, ID # AR58, 24” 322 HD Bucket......................................................................$1,000 1900 CATERPILLAR 32224, Serial # 32224BF63K, ID # BF63, 24” GP Bucket, S Linkage..................................................................$1,000 1900 CATERPILLAR 32224, Serial # 32224BF62K, ID # BF62, 24” HD Bucket, S Linkage ................................................................$1,000 CATERPILLAR 32224, Serial # C040361A1-24”, ID # C040361A1, 322 24” bucket, Fits 322C..........................................................$1,000 CATERPILLAR 32224, Serial # C052032A1-24” BKT, ID # C052032A1, 322 24” bucket, Fits 322C....................................$1,000 1900 CATERPILLAR 32230, Serial # N32230AR56, ID # AR56, 30” 322 HD Bucket......................................................................$1,100 1900 CATERPILLAR 32230, Serial # 32230BU166K, ID # BU166, 30” HD Bucket ............................................................................$1,200 CATERPILLAR 32230, Serial # “C049871A3-30” BKT, ID # C049871A3, 322 30” bucket, Fits 322C....................................$1,200 CATERPILLAR 32236, Serial # 32236BU1323, ID # BU1323, 36” 322 Bucket ..................................................................................$1,200 CATERPILLAR 32236, Serial # 0Z1R10643, ID # BU585, 36” HDR 322 Bucket ..................................................................................$1,000 CATERPILLAR 32242, Serial # C040160A3-42, ID # C040160A3, 322 42” Bucket............................................................................$1,000 1900 CATERPILLAR 32248, Serial # N32248AR60, ID # AR60, 48” HD Power Bucket for 322 ....................................................$1,500 CATERPILLAR 32260, Serial # U32260BU1683, ID # BU1683, 322 60” Bucket, S,B linkage ..............................................................$2,500 CATERPILLAR 32448, Serial # U32448BU1573, ID # BU1573, 324 48” Bucket, CB linkage................................................................$2,500 CATERPILLAR 32460, Serial # 0WAT11725, ID # BU1367, 324 60” Bucket, 2.33 CYD (HD) ..............................................................$2,500 CATERPILLAR 32460, Serial # 0WAT05027, ID # BU928, 60” 324 HD Bucket, CB Linkage ..............................................................$2,500 CATERPILLAR 32460, Serial # 32460BU1142, ID # BU1142, 60” HD Bucket, CB Linkage ..............................................................$2,500 CATERPILLAR 32536, Serial # U32536BU2021, ID # BU2021, 325 36” Bucket, C linkage..................................................................$1,022 1900 CATERPILLAR 32560, Serial # 32560BU226, ID # BU226, 60” HD Bucket ............................................................................$2,300 CATERPILLAR 33026, Serial # U33026BU2008, ID # BU2008, 330 26” Bucket, D linkage..................................................................$2,044 CATERPILLAR 34530, Serial # 0Z1K17101, ID # BU1537, 30” HDR Bucket - TB Linkage....................................................................$5,175

Email: smasisak@clevelandbrothers.com

Page 18 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

866-532-9023 www.clevelandbrothers.com Email: smasisak@clevelandbrothers.com

CATERPILLAR 34542, Serial # U34542BU2262, ID # BU2262, 345 42” Bucket, F link ........................................................................$3,578 CATERPILLAR 34548, Serial # 0ZIK12800, ID # BU1050, 48” HDR Bucket - TB Linkage....................................................................$5,175 CATERPILLAR 34548, Serial # 0Z1K16904, ID # BU1585, 48” HDR Bucket - TB Linkage....................................................................$5,175 CATERPILLAR 34548, Serial # Z1K06588, ID # C040845A5, 345 48” bucket, Fits 345B..................................................................$5,175 1900 CATERPILLAR 34554, Serial # 34554BU262, ID # BU262, 54” HD - F Linkage ....................................................................$5,175 2006 CATERPILLAR 36575, Serial # Z1K10016, ID # C063703A2, V-Link 75” Bucket........................................................................$7,475 CATERPILLAR 904GP, Serial # WFCWGP001766, ID # BH131, 904 .80CYD GP Bucket..........................................................................$920 CATERPILLAR 904GP, Serial # 904GPBH204, ID # BH204, 905 .80CYD GP Bucket..........................................................................$920 CATERPILLAR 924GP, Serial # 000128419A, ID # FB561A, 2.3CYD GP ................................................................................................$1,500 CATERPILLAR 924LM, Serial # U924LMFB855, ID # FB855, 924 LM Bucket....................................................................................$2,044 CATERPILLAR 930MH, Serial # 930MHFB570, ID # FB570, 4.25CYD MH ..............................................................................$1,200 CATERPILLAR 950, Serial # U950COALFB707, ID # FB707, 950 Coal Bucket , 114........................................................................$4,600 CATERPILLAR 963MP, Serial # U963MPFB509, ID # FB509, 963 BUCKET, 1.7 CU METER, PART #8V7364................................$2,044 CATERPILLAR 963MP, Serial # 963MPFB292, ID # FB292, 963C 2.5CYD MP Bucket ....................................................................$2,500 CATERPILLAR 973GP, Serial # U973GPFB626, ID # FB626, 973GP BUCKET - PART #9V5192..........................................................$1,533 CATERPILLAR BHLC18, Serial # BHLD18DB138, ID # DB138, 18” C Series Bucket ..............................................................................$173 CATERPILLAR BHLDW36, Serial # CI705000318, ID # DB426, 36” HD Pin Lock Bucket........................................................................$920 CATERPILLAR BHLDW36, Serial # 080200391, ID # DB595, 36” HD Pin Lock Bucket........................................................................$920 CATERPILLAR BHLGP, Serial # CR612001743, ID # BH206, 1.0CYD GP Front Bucket - Is not an IT Bucket ............................$920 CATERPILLAR BHLGP, Serial # CV101005172, ID # MS1157, 1.4CYD GP Bucket w/BOCE ..........................................................$920 CATERPILLAR BHLGP, Serial # CV101005162, ID # MS1158, 1.4CYD GP Bucket w/BOCE ..........................................................$920 CATERPILLAR BHLGP, Serial # C064052A2-1.4CYD, ID # C064052A2, 430E ST 1.4CYD ......................................................$920 2000 CATERPILLAR M31571, Serial # C004087A2, ID # 231111, M315 71” Swivel Bucket ............................................................$1,725 CATERPILLAR M31835, Serial # M31835BU1104, ID # BU1104, M318 35” Bucket ........................................................................$1,380 CATERPILLAR M32042, Serial # M32042BU689, ID # BU689, M320 42” Bucket ........................................................................$1,380 CATERPILLAR M32230, Serial # M32230-BU1047, ID # BU1047, M322D 30” Bucket......................................................................$1,380 2006 CATERPILLAR SSDB54, Serial # 65SSDT001482, ID # 260723, SSL 54” Light Material Bucket........................................$345 CATERPILLAR SSGP66, Serial # USSGP66SB1681, ID # SB1681, 232B 66IN GP BUCKET ................................................................$307 CATERPILLAR SSUB66, Serial # SSUB66SB294, ID # SB294, SSL 66” Utility Bucket ............................................................................$345 1900 ENTEK 31536, Serial # 10713, ID # EB66, 315 36” Entek coupler bucket..............................................................................$1,725 ESCO CORPORATION 34554, Serial # RH74845, ID # C002828A1, 345 54” bucket, 3.0CUYD HDP Bucket ....................................$2,875 ESCO CORPORATION 34554, Serial # RH70961, ID # C038291A1, 345 54” bucket F Linkage ..........................................................$2,875 ESCO CORPORATION E12030, Serial # UE12030EB1301, ID # EB1301, 30IN Bucket, F linkage ....................................................$307 2010 Gar-Bro 423G, Serial # X100145, ID # X100145, Concrete Bucket ..........................................................................................$1,533 KENCO 31536SLB, Serial # 141330-1-1, ID # EB1235, 36” Slab bucket - Kenco for 315 excavator ..............................................$2,875 WERK-BRAU BHLC18, Serial # DB668, ID # DB668, 18” HD WerkBrau Bucket......................................................................................$173 CATERPILLAR 34574, Serial # 0Z1K17081, ID # BU1517, 74” HDR Bucket - TB Linkage....................................................................$7,475 CAB

CATERPILLAR MISC ITEMS, Serial # CP56SFTCAB-MS939, ID # MS939, Fremar Vinyl Cab Enclosure w/heater for CP56 ............$230

2001 SULLAIR 375CFM, SN# 004-135169, ID# ERAA0014, Generator, 375CFM, 150M max PSI, 4410 lbs weight, 48 gallon gal. fuel tank, 6.1 gpu fuel use, surge brakes, pintel hitch, louvers on after cooler, 3150 Hrs............................................................................$12,778

Equipment Located In Pennsylvania, & West Virginia

2006 CATERPILLAR 312CPL, SN# 0MXA10152, ID# 260454 311/312 Coupler to 315 Linkage ..................................................$1,500

Low-Hour Rental Fleet Roll Out CAB ASSEMBLY

CATERPILLAR 350CAB, Serial # U350CABMS756, ID # MS756, 350B/350C Cab assembly -Part #19CAB0022B..........................$256 CABLE

2006 Multiquip VH52A6M, Serial # V5-BN1682, ID # 260975, 30’ High Cycle Cable ..............................................................................$51 CHIPPING HAMMERS

2010 TOKU CH-3H, Serial # 810099, ID # X100093, Chipping Hammer ..........................................................................................$102 2010 TOKU CH-3H, Serial # 810093, ID # X100096, Chipping Hammer ..........................................................................................$102 2009 TOKU CH-3H, Serial # 901110, ID # X090204, Chipping Hammer ..........................................................................................$102 2009 TOKU CH-3H, Serial # 901111, ID # X090206, Chipping Hammer ..........................................................................................$102 2009 TOKU CH-3H, Serial # 901074, ID # X090207, Chipping Hammer ..........................................................................................$102 CLAY DIGGERS

2004 TOKU TCD-30, Serial # 0L005, ID # 240149, 30# Clay Digger ..........................................................................................................$204 2004 TOKU TCD-30, Serial # 2K044, ID # 240150, 30# Clay Digger ..............................................................................................$204 COMPOST TURNER

BROWN BEAR RC24, Serial # MS662, ID # MS662, R24 Brown Bear compost turner..................................................................$10,222 CONCRETE VIBRATORS

2007 Multiquip G55H, Serial # ZC4800216, ID # X01765, Concrete Vibrator............................................................................$307 2007 Wacker AR366042, Serial # 1597881, ID # 270014, Concrete Vibrator External Motor ..................................................$200 2007 Wacker AR366042, Serial # 1617181, ID # 270016, Concrete Vibrator External Motor ..................................................$200 2007 Wacker ARFU366115, Serial # 1832889, ID # 270921, Concrete Vibrator External Motor ..............................................$1,800 CONTROL KIT

CATERPILLAR MISC ITEMS, Serial # 0000MS1015, ID # MS1015, 416 Control Kit ..............................................................$575 COUNTER WEIGHT

CATERPILLAR D6TCWT, Serial # D6CWTMS1516, ID # MS1516, D6T Counterweight ........................................................................$575 COUPLERS

CATERPILLAR 302CPL, Serial # 302CPLCC598, ID # CC598, 302 Manual PG Coupler........................................................................$288 2011 CATERPILLAR 307BRKT, Serial # 0WAB00100, ID # CC726, 307C/308C Hyd Quick Coupler ....................................................$288 2005 CATERPILLAR 307CPLW, Serial # 0ATL00837, ID # 250843, 307 Coupler ....................................................................................$575 2005 CATERPILLAR 307CPLW, Serial # 0ATL00886, ID # 251152, 307 Coupler ....................................................................................$575 2005 CATERPILLAR 307CPLW, Serial # 0ATL00834, ID # 250841, 307 Coupler ....................................................................................$358 2003 CATERPILLAR 307CPLW, Serial # 0ATL00477, ID # 231602, 307 Coupler ....................................................................................$575 2007 CATERPILLAR 312CPL, Serial # 0MXA10166, ID # 270816, 311/312 Coupler to 315 Linkage ..............................................$1,500 2007 CATERPILLAR 312CPL, Serial # 0MXA10169, ID # 270818, 311/312 Coupler to 315 Linkage ..............................................$1,500 2007 CATERPILLAR 312CPL, Serial # 0MXA10168, ID # 270819, 311/312 Coupler to 315 Linkage ..............................................$1,500 2006 CATERPILLAR 312CPL, Serial # 0MXA10152, ID # 260454, 311/312 Coupler to 315 Linkage ..............................................$1,500 2006 CATERPILLAR 312CPL, Serial # 0MXA10151, ID # 260455, 311/312 Coupler to 315 Linkage ..............................................$1,500 2005 CATERPILLAR 312CPL, Serial # 0MXA10141, ID # 250509, 311/312 Coupler to 315 Linkage ..................................................$575 CATERPILLAR 312CPL, Serial # 608465A, ID # CC582, 311/312 Coupler to 315 Linkage ..............................................................$1,500 CATERPILLAR 314CPL, Serial # BBA10765, ID # C051799A1, 314 coupler ............................................................................................$511 CATERPILLAR 325CPL, Serial # 0PGA20510, ID # CU445, 325 Coupler ............................................................................................$920

www.clevelandbrothers.com

CATERPILLAR 325CPL, Serial # 0C1F10026, ID # CU207, 325 Hyd PG Coupler, C Linkage, H&K Design....................................$920 CATERPILLAR 325CPL, Serial # 0MXA10165, ID # CU146, 325 Hyd PG Coupler, picks up D Linkage............................................$920 CATERPILLAR 325CPL, Serial # 0GWK00102, ID # CU421, Hyd PG Coupler for 325C......................................................................$920 CATERPILLAR 330CPL, Serial # U330CPLCU663, ID # CU663, 330 Hydraulic coupler ................................................................$3,578 CATERPILLAR 330CPL, Serial # 07XW00814, ID # CU382, Center Lock Coupler - DB Linkage ........................................................$1,725 CATERPILLAR 345CPL, Serial # 07XW00642, ID # CU162, 345 Dedicated CPLR-Does not fit regular buckets (Not TB or F)....$1,380 2005 CATERPILLAR BHLDCDW, Serial # CC50200211, ID # 250283, Pin Lock Coupler 416-430 E & D ..................................$173 CATERPILLAR IT38CPL, Serial # CU427-IT38CPL, ID # CU427, Fusion Coupler for IT38H ..........................................................$1,725 CATERPILLAR IT38CPL, Serial # UIT38CPLFA595, ID # FA595, IT38 COUPLER............................................................................$1,533 CATERPILLAR IT38CPL, Serial # IT38CPL-MS884, ID # MS884, IT38H Coupler ............................................................................$1,725 CATERPILLAR IT38CPLF, Serial # IT38CPLFMS1023, ID # MS1023, IT38H Fusion Coupler................................................$1,725 CATERPILLAR IT38CPLF, Serial # 0G7W00104, ID # MS872, IT38H Fusion Coupler ................................................................$1,725 GEITH INC 312CPL, Serial # 507867, ID # CC141, Geith The Claw manual coupler for 315CL ............................................................$288 2001 HELAC CORPORATION 302CPL, Serial # T61053, ID # 210704A, 302 Helac Coupler ....................................................$1,150 2004 HELAC CORPORATION 304CPL, Serial # T73205, ID # 240975A, 304C/305D Swivel Coupler......................................$1,150 HELAC CORPORATION PT07, Serial # T75518, ID # CC421, PT7 Tilt Coupler for 420E or 430E ........................................................$920 DOZERS

2011 CAT D6N LGP, Serial # 0GHS00827, ID # 100641, 1967 Hours, Dozer, Erops, A/C, Straight blade, draw bar ............$205,500 2010 CAT D7E, Serial # 0MDB00141, ID # 090158, 1811 Hours, Dozer, Erops, A/C, SU blade, MS ripper ..............................$400,000 2010 CAT D8T, Serial # 0KPZ03692, ID # 100151, 2508 Hours, Dozer, EROPS, A/C, SU blade, SS Ripper, UC @ 2508hrs avg. 6080%, 24in shoes ....................................................................$433,500 2009 CATERPILLAR D4K XL, Serial # 0MMM00430, ID # 080925A, 1147 Hours, Dozer, Erops, A/C, PAT blade, drawbar, sweeps, UC @ 1147hrs 85-95% 18in shoes ........................$77,200 1994 CATERPILLAR D5H LGP, Serial # 01DD06193, ID # UT12955, 17445 Hours, Dozer, Erops, A/C, PAT Blade, lever steering, Draw bar, UC @ 17445hrs avg. 40-65%, 34I’’shoes ............$18,400 2011 CATERPILLAR D6K LGP, Serial # 0DHA01583, ID # 100638, 2249 Hours, Dozer, Erops, A/C, Straight blade, drawbar ....$126,000 2011 CATERPILLAR D6K LGP, Serial # 0DHA01377, ID # 110023, 1190 Hours, Dozer, Erops, A/C , PAT blade, drawbar UC @ 1185hrs 70-85%, 30in shoes ..............................................................$132,000 2011 CATERPILLAR D6K LGP, Serial # 0DHA01502, ID # 100851, 1873 Hours, Dozer, Erops, A/C, straight blade accugrade ready .......... ................................................................................................$123,900 2011 CATERPILLAR D6N LGP, Serial # 0GHS00538, ID # 101002 1709 Hours, Dozer, Cab, A/C ................................................$189,111 2008 CATERPILLAR D6N XL, Serial # 0DJA01026, ID # 080354, 2117 Hours, Dozer, Erops, PAT blade, aux. hyd., accugrade ready ...... ................................................................................................$169,000 2011 CATERPILLAR D6T XL, Serial # 0GMK00101, ID # 100980, 869 Hours, Dozer, EROPS, A/C, SU blade, Drawbar ..........$270,000 2011 CATERPILLAR D6T XL, Serial # 0GMK00255, ID # 111448, 207 Hours, Dozer, Erops, A/C, 24in shoes ..........................$290,000 2011 CATERPILLAR D6T XL, Serial # 0GMK00161, ID # 100979, 931 Hours, Dozer, Erops, A/C, 24in shoes ..........................$288,900 2011 CATERPILLAR D6T XL, Serial # 0GMK00342, ID # 110245, 143 Hours, Dozer, Erops, A/C, sweeps, Winch, SU Blade, UC @ 143hrs 99%............................................................................$312,000 2011 CATERPILLAR D6T XL, Serial # 0GMK00339, ID # 110246, 550 Hours, Dozer, Erops, A/C, 24in shoes ..........................$305,900 2011 CATERPILLAR D6T XL, Serial # 0GMK00142, ID # 110441, 639 Hours, Dozer, Erops, A/C, 24in shoes ..........................$305,900 2010 CATERPILLAR D6T XL, Serial # 0LAY01570, ID # 100404, 667 Hours, Dozer, Erops, A/C , SU blade, Winch, sweeps..$283,500 2011 CATERPILLAR D6T XL R, Serial # 0GMK00108, ID # 110305, 947 Hours, Dozer, Erops, A/C, SU blade, MS ripper, uc @ 947hrs avg. 85-90%, 24in shoes ........................................$278,900

866-532-9023

2010 CATERPILLAR D6T XL W, Serial # 0LAY01555, ID # 100157, 1045 Hours, Dozer, Cab, A/C, Straigh blade, NO Winch, UC @ 1045hrs 85-95% ..............................................................$250,444 2010 CATERPILLAR D6T XL W, Serial # 0LAY01566, ID # 100156, 1473 Hours, Dozer, Cab, A/C, SU Blade, NO Winch, UC @ 1449hrs 98%..........................................................................$250,444 2011 CATERPILLAR D6T XW, Serial # 0SLJ00148, ID # 110082, 242 Hours, Dozer, Erops, A/C, SU blade..............................$305,900 2011 CATERPILLAR D6T XW, Serial # 0SLJ00149, ID # 110083, 350 Hours, Dozer, Erops, A/C, SU blade..............................$305,900 2011 CATERPILLAR D6T XW, Serial # 0SLJ00170, ID # 110235, 648 Hours, Dozer, Erops, A/C, 24In shoes ..........................$289,900 2011 CATERPILLAR D6T XW, Serial # 0SLJ00147, ID # 110081, 388 Hours, Dozer, Erops, A/C, 24In shoes ..........................$305,900 2010 CATERPILLAR D7R, Serial # 0AEC02369, ID # 090333, 1818 Hours, Dozer, Erops, A/C, SU Blade, MS ripper, UC @ 1818hrs 9095%, 24in shoes ....................................................................$400,000 1971 CATERPILLAR D8H, Serial # 046A25694, ID # UT12605, 3611 Hours, Dozer, NO Blade, Scraper tractor, OROPS, split scraper winch, drawbar, no blade hyd, UC @ 3611hrs 40-60%........$10,222 1971 CATERPILLAR D8H, Serial # 046A25076, ID # UT12587, 3995 Hours, Dozer, NO Blade, Scraper tractor, OROPS, split scraper winch, drawbar, no blade hyd. 3995HRS 70-99%, 24” Shoes 99%, .. ....................................................................................................$10,222 1971 CATERPILLAR D8H, Serial # 046A25072, ID # UT12585, 5890 Hours, Dozer, NO Blade, Scraper tractor, OROPS, split scraper winch, UC @ 5890HRS, 24” shoes @ 99%, bushings 85%, links 40%, seg. 85%, idler 60%, rollers..........................................$10,222 2011 CATERPILLAR D8T, Serial # 0KPZ03827, ID # 100924, 1965 Hours, Dozer, Erops, A/C, 24in shoes, SU Blade ................$455,900 2010 CATERPILLAR D8T W, Serial # 0KPZ03717, ID # 100241, 2176 Hours, Dozer, Cab, A/C ................................................$383,333 DRAWBAR ASSEMBLY

CATERPILLAR D8DRWBAR, Serial # UD8RDRWBARCT85, ID # CT85, D8R DRAWBAR ASSMBLY ................................................$767 END PANELS

2004 GME TRENCH PROTECTI END PANEL, Serial # M04081559, ID # 241179, End panel - Pit kit style end ............$307 2004 GME TRENCH PROTECTI END PANEL, Serial # M04081560, ID # 241180 1 Hours, End panel - Pit kit style end$307 2004 GME TRENCH PROTECTI END PANEL, Serial # M04081561, ID # 241181, End panel - Pit kit style end ............$307 2004 GME TRENCH PROTECTI END PANEL, Serial # M04081656, ID # 241183, End panel - Pit kit style end ............$307 EXCAVATORS

2009 CAT 321DLCR, Serial # 0NAS00345, ID # 080560, 4224 Hours, Exc, EROPS, A/C, Aux. Hyd., Quick coupler, UC @ 4209hrs 80-99%, 31in shoes ..............................................................$125,000 2008 CAT 321DLCR, Serial # 0NAS00170, ID # 071169A, 3966 Hours, Exc, Erops, A/C, Aux. Hyd., Quick coupler, 36in bkt., UC @ 3966hrs avg 70-80%, 31in shoes ........................................$119,900 2008 CAT 325DL, Serial # 0A3R01045, ID # 070823, 3571 Hours, Exc, Erops, A/C, Aux. hyd., Quick coupler, 31.5in shoes....$133,500 2009 CAT 329DL, Serial # 0JHJ00317, ID # 081069, 2728 Hours, Exc, Erops, A/C, Aux Hyd, Quick coupler, travel straight pedal, pattern changer, plumbed to stick for hammer, 32in shoes ............$200,000 2008 CAT 330DL T, Serial # 0MWP02801, ID # 071158, 5267 Hours, Exc, Erops, A/C, Aux. Hyd., Quick coupler, hyd. Thumb. UC @ 5243hrs avg 60-85%, 21in shoes...................................$155,600 1989 CATERPILLAR 225B, Serial # 02ZD01798, ID # UT12935, 12871 Hours, Excavator, Cab, Bkt, Long Stick, UC @ 12871HRS 5070%, 30IN Triple Grouser 70% ..............................................$14,311 2011 CATERPILLAR 312DL, Serial # 0XGK00230, ID # 100727, 947 Hours, Exc, Cab, A/C, Aux. Hyd., Plumber to stick for coupler .... ................................................................................................$120,000 2005 CATERPILLAR 314CCR, Serial # 0KJA00159, ID # UP12724, 125 Hours, Excavator, Cab, A/C, 42in Bucket, leveling Blade, UC @ 4982hrs 50-75% ..............................................$53,156 2011 CATERPILLAR 320DL, Serial # 0SPN00504, ID # 100734, 1712 Hours, Exc, Cab, A/C, Coupler, 31” TG with guarding$150,000 2011 CATERPILLAR 320DL, Serial # 0SPN00505, ID # 100733, 1748 Hours, Exc, Cab, A/C, Aux, Hyd., Quick coupler, 1 piece boom, UC @ 1748hrs 80-85%, 31in shoes....................................$150,000 2010 CATERPILLAR 320DL, Serial # 0PHX02671, ID # 100752, 2016 Hours, Exc, Cab, A/C, Aux. Hyd., Combined function Hyd......... ................................................................................................$130,000

2009 CATERPILLAR 321DLCR, Serial # 0NAS00409, ID # 080805, 3315 Hours, Exc, Cab, A/C, Aux, Hyd., Quick coupler, Plumbed to stick for hammer, 1 piece boom, UC @ 3307hrs 8595%, 31in shoes ....................................................................$135,000 2008 CATERPILLAR 330DL, Serial # 0MWP03161, ID # 080075, 4252 Hours, Exc, Cab, A/C, Aux, Hyd., Quick coupler, Plumbed to stick for hammer, 1 piece boom, UC @ 4252hrs 80-90%, 31.5in shoes ......................................................................................$160,000 2007 CATERPILLAR 345CL, Serial # 0PJW01759, ID # 060678, 9095 Hours, Excavator, Cab, A/C ............................................$94,044 2011 CATERPILLAR 345DL, Serial # 0EEH01027, ID # 110330, 1817 Hours, Exc, Cab, A/C, Aux, Hyd., 12st 10in stick ......$330,000 2011 CATERPILLAR 345DL, Serial # 0EEH01028, ID # 110331, 1665 Hours, Exc, Cab, A/C, 1 piece boom, UC @ 1665hrs 95-99%.. ................................................................................................$335,000 2008 CATERPILLAR M316D, Serial # 0W6A00711, ID # 071135, 3019 Hours, Excavator, Cab, A/C, aux. hyd., 8’6” stick..........$86,889 EXHAUST PIPING

CATERPILLAR MISC ITEMS, Serial # 208-5116MS1254, ID # MS1254, 740 Exhaust Piping........................................................$920 CATERPILLAR MISC ITEMS, Serial # 208-5116MS1255, ID # MS1255, 740 Exhaust Piping........................................................$920 CATERPILLAR MISC ITEMS, Serial # 208-5116MS1259, ID # MS1259, 740 Exhaust Piping........................................................$920 CATERPILLAR MISC ITEMS, Serial # 208-5116MS1260, ID # MS1260, 740 Exhaust Piping........................................................$920 FORKS

CATERPILLAR 938FRKS, Serial # U938FRKSFA696, ID # FA696, 938 48in forks..............................................................................$2,556 CATERPILLAR 938FRKS, Serial # U938FRKSFA593, ID # FA593, 938 96in forks..............................................................................$2,556 CATERPILLAR 938FRKS, Serial # 07PW03123, ID # FA409, 96” Forks ............................................................................................$1,725 CATERPILLAR 938FRKS, Serial # FA498-938FRKS, ID # FA498, Bobcat Pin on 60” Forks for CAT 938........................................$1,725 CATERPILLAR 950GP, Serial # 0B1E05000, ID # FB709, IT 54” Forks ............................................................................................$5,175 CATERPILLAR CWLF48, Serial # 65SSXX000478, ID # CF502, 904 48” Forks..................................................................................$690 CATERPILLAR CWLF48, Serial # CWLF48CF115, ID # CF115, 906 48” Forks ........................................................................................$690 CATERPILLAR IT62F60, Serial # FA485ITF60, ID # FA485, 60” Forks ............................................................................................$1,725 CATERPILLAR IT62F60, Serial # IT6260FFA353, ID # FA353, Pallet Forks ............................................................................................$1,725 CATERPILLAR IT62FRKS, Serial # C053052A4-FORK, ID # C053052A4, IT 62H Forks..........................................................$1,725 CATERPILLAR ITF60, Serial # ITF60F-FA526, ID # FA526, 60” Fusion Forks................................................................................$1,725 CATERPILLAR ITF72, Serial # 0B1H04209, ID # FA566, 72” Fusion Forks ............................................................................................$1,725 CATERPILLAR ITF72, Serial # 0B1H04466, ID # FA636, 72” Fusion Forks ............................................................................................$1,725 CATERPILLAR ITFPIPE, Serial # 0AKR15291, ID # FA572, 72” Pipe Forks for IT38H Fusion Coupler......................................$14,375 CATERPILLAR SSFU72, Serial # SSFU72, ID # CF17, SSL 72” Utility Forks......................................................................................$460 MISCELLANEOUS OTHER THF48, Serial # SSF48CF150, ID # CF150, DO NOT FIT CAT MACHINES - SSL off brand forks ..$1,329 ROCKLAND INC ITFCLAMP, Serial # R18115, ID # C053087A1, IT28 Logging Forks - Top Middle Tine........................................$4,025 ROCKLAND INC PG-2, Serial # R58785, ID # FA444, Rockland PG-2 Pipe Grapple Forks....................................................................$14,375 GENERATORS

2010 CATERPILLAR GP5600A, Serial # 5893040, ID # X100031, 1 Hours, 5.6 KW Generator ........................................................$1,200 2001 SULLAIR 375CFM, Serial # 004-135169, ID # ERAA0014, 3150 Hours, Generator, 375CFM, 150M max PSI, 4410 lbs weight, 48 gallon gal. fuel tank, 6.1 gpu fuel use, surge brakes, pintel hitch, louvers on after cooler ..............................................................$12,778 2011 WACKER GP5600A, Serial # 20030114, ID # X110308, 5.6 KW WACKER GENERATOR W/HONDA GAS,WHEEL KIT,ELEC START ......................................................................................................$1,329 2011 WACKER GP5600A, Serial # 20030113, ID # X110310, 5.6 KW WACKER GENERATOR W/HONDA GAS,WHEEL KIT,ELEC START ......................................................................................................$1,329

Email: smasisak@clevelandbrothers.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 19

866-532-9023 www.clevelandbrothers.com Email: smasisak@clevelandbrothers.com Equipment Located In Pennsylvania, & West Virginia

2002 NPK INC E205, SN# 72742, ID# A22037, E205 Hammer w/’C’Bracket, Hyd. Quick disconnects, no heads ..........................$3,067 2010 Wacker GP5600A, Serial # 5892206, ID # X100114, 5.6 KW Generator......................................................................................$1,200 2010 Wacker GP5600A, Serial # 5929589, ID # X100340, 5.6 KW Generator......................................................................................$1,200 HAMMERS

2002 NPK INC E205, Serial # 72740, ID # A22036, E205 Hammer ......................................................................................................$3,067 2002 NPK INC E205, Serial # 72742, ID # A22037, E205 Hammer w/’C’Bracket, Hyd. Quick disconnects, no heads ......................$3,067 IT BLANK

CATERPILLAR MISC ITEMS, Serial # 113-2677MS483, ID # MS483, IT Blank Hooks w/Pintle Hitch ........................................$920 LIGHT PLANTS

2008 Allmand Brothers Night-Lite, Serial # 1737PRO08, ID # X080088, 4397 Hours, Light Plant ............................................$3,800 2008 Allmand Brothers Night-Lite, Serial # 1738PRO08, ID # X080087, 3722 Hours, Light Plant ............................................$3,900

2010 TOKU TPB-90, Serial # 10A055, ID # X100078, 90# Pavement Breaker ..........................................................................$307 2010 TOKU TPB-90, Serial # 10A015, ID # X100081, 90# Pavement Breaker ..........................................................................$307 2010 TOKU TPB-90, Serial # 10A001, ID # X100083, 90# Pavement Breaker............................................................................$307 RAKES

2008 CATERPILLAR LR15B, Serial # 0EFS00427, ID # LR98, SSL Landscape Rake ..........................................................................$4,025 2007 CATERPILLAR LR15B, Serial # 0EFS00401, ID # LR51, SSL Landscape Rake ..........................................................................$4,025 ROCKLAND INC BR10, Serial # R56795B, ID # MS847, BR Blade Rake for D4G XL..........................................................................$2,875 TORO / DINGO TDGPLB, Serial # 270000177, ID # GA51, Toro Dingo Grapple Rake........................................................................$920 REMOTE ROLLER

1999 Rammax RW1404-33, Serial # 325864, ID # R99047, 2325 Hours, Remote Roller..................................................................$4,000

MATERIAL HANDLING ARM

RIDE ON TRENCHER

CATERPILLAR ITMH, Serial # ITMH00MS1007, ID # MS1007, IT38H Material Handling Arm ....................................................$1,725

2005 Vermeer RT450, Serial # 818, ID # 250892, 759 Hours, Ride On Trencher ..............................................................................$13,000 RIMS

MISC ATTACHMENT

GOMACO MISC ITEMS, Serial # MISC-MS1137, ID # MS1137, (2) 4’ FRAME EXTENSIONS, (3) 12’ SPANIT INSERTS, (2) 3’ SPANIT INSERTS ......................................................................................$5,175 MOTOR GRADER

2009 CATERPILLAR 120M, Serial # 0D9W00128, ID # 100194, 913 Hours, Motor Grader, Cab, A/C, tires @ 913hrs 95% $184,000 MULTI TERRAIN LOADERS

2011 CATERPILLAR 247B, Serial # 0TSL00729, ID # 110088, 515 Hours, MTL, Cab, A/C, UC @ 359hrs, 15in rubber tracks 80%.......... ....................................................................................................$29,000 2005 CATERPILLAR 247B, Serial # 0MTL02391, ID # UP12463, 1193 Hours, MTL, Canopy, 74in Bucket, UC @ 1193HRS 80% ........ ....................................................................................................$19,422 2005 CATERPILLAR 257B, Serial # 0SLK03397, ID # UT13001, 2957 Hours, MTL, Cab, Tier II Engine, 2 Speed Travel, High flow, Ele conn for implements, 14.5IN tracks 50% @ 2808HRS ........$15,333 ONBOARD LEVELER

CATERPILLAR MISC ITEMS, Serial # MISCITEMS-MS838, ID # MS838, Two 30’ Onboard levelers ................................................$920 PADDLE AERATORS

Brown Bear SC3610, Serial # SC36B015, ID # MS215, Paddle Aerator........................................................................................$17,250 Brown Bear SC3610, Serial # SC36B-016, ID # MS216, Paddle Aerator........................................................................................$17,250 PAVERS

2003 CATERPILLAR AP650B, Serial # 09DN00513, ID # UT12861, 6951 Hours, Paver, Tier II engine ..........................$51,111 2007 CATERPILLAR CB534D XW, Serial # 0EAA00571, ID # UP12180, 3361 Hours, Paver, ROPS/FOPS/CANOPY, Tier I engine, Standard nozzles, Versa Vibe system, cocoa mats, off set hitch, 78 3/4” solid drum ........................................................................$54,178 2007 CATERPILLAR CB534D XW, Serial # 0EAA00590, ID # UP12179, 3283 Hours, Paver, ROPS/FOPS/CANOPY, Tier I engine, Standard nozzles, Versa Vibe system, mats, off set hitch, 78 3/4” solid drum ..........................................................................................$54,178 2005 CATERPILLAR CB534D XW, Serial # 0EAA00370, ID # UP11570N, 2855 Hours, Paver, ROPS/Platform, working lights, hitch, Versa vibe system, high intensity lights ..................................$56,222 PAVING BREAKERS

2007 SULLAIR MPB-35C, Serial # 0240127P, ID # X01758, 35LB Paving Breaker ................................................................................$228 2007 SULLAIR MPB-35C, Serial # 0240657P, ID # X01759, 35LB Paving Breaker ................................................................................$228 2004 SULLAIR MPB-90AF, Serial # 0680554, ID # X00660, 1 Hours, 90LB Paving Breaker..........................................................$342 2010 TOKU TPB-90, Serial # 10A030, ID # X100077, 90# Pavement Breaker ..........................................................................$307

2010 CAT CS323C, SN# 0DAR00466, ID# 090282, Roller, OROPS, Canopy, smooth drum, tires @ 215hrs 95-99%” 216 Hrs........$55,500

Low-Hour Rental Fleet Roll Out

CATERPILLAR 777TIRES, Serial # U777TIRESMS1024, ID # MS1024, (4) 24.00-49 777B Mode type, RIMS ONLY RIPPER

WERK-BRAU 325RIP, Serial # WBRT3-325DRIP, ID # RR111, 30” Frost Ripper..................................................................................$1,725 RIVET BUSTER

2000 AMERICAN PNEUMATIC RB-133, Serial # 294739, ID # 200568, Rivet Buster ......................................................................$150 ROCK DRILLS

2002 SULLAIR MRD55, Serial # 02250094-9, ID # ERDD0001, Rock Drill ........................................................................................$358 2008 TAMCO THB-110N, Serial # 804069, ID # X080496, 15# Rock Drill ........................................................................................$256 2008 TAMCO THB-110N, Serial # 804057, ID # X080497, 15# Rock Drill ........................................................................................$256 2008 TAMCO THB-110N, Serial # 804019, ID # X080498, 15# Rock Drill ........................................................................................$256 2007 TAMCO THB-110N, Serial # 701036, ID # 270858, 15# Rock Drill ..................................................................................................$204 2007 TAMCO THB-110N, Serial # 701021, ID # 270859, 15# Rock Drill ..................................................................................................$256 2007 TAMCO THB-110N, Serial # 701016, ID # 270860, 15# Rock Drill ..................................................................................................$256 1999 TOKU RD-115, Serial # 254202, ID # 99019, 23# Rock Drill.. ..........................................................................................................$102 2001 TOKU RD-137, Serial # 0935M137, ID # 210241, 45# Rock Drill ..................................................................................................$153 2007 TOKU RD-7, Serial # 5L015, ID # 270282, 8# Rock Drill$204 2007 TOKU RD-7, Serial # 4D022, ID # 270284, 8# Rock Drill$204 2007 TOKU RD-7, Serial # 4L033, ID # 270285, 8# Rock Drill$204 2004 TOKU THD-1100U, Serial # 307015, ID # 240152, 15# Rock Drill ..................................................................................................$256 ROLLERS

2005 CAT CB534D XW, Serial # 0EAA00387, ID # 070914, 1320 Hours, Roller, 2 Drum, Canopy, Operator Station, Spray System, Vibratory ....................................................................................$55,900 2011 CAT CP56, Serial # 0C5P00523, ID # 100570, 867 Hours, Roller, Cab, A/C ......................................................................$127,800 2011 CAT CP56, Serial # 0C5P00521, ID # 100572, 812 Hours, Roller, Cab, A/C ......................................................................$127,800 2010 CAT CP56, Serial # 0C5P00505, ID # 100057, 2141 Hours, Roller, Cab, A/C, Pad foot, leveling blade ............................$113,500 2010 CAT CP56, Serial # 0C5P00464, ID # 090342, 1335 Hours, Roller, Cab, A/C, Pad foot, leveling blade ............................$120,000 2010 CAT CS323C, Serial # 0DAR00466, ID # 090282, 216 Hours, Roller, OROPS, Canopy, smooth drum, tires @ 215hrs 95-99% ........ ....................................................................................................$55,500 2008 CAT CS433E, Serial # 0ASR01012, ID # 080023, 776 Hours, Roller, OROPS, Vibratory, Canopy, smooth drum, tires @ 775hrs 90% ..........................................................................................$55,500

www.clevelandbrothers.com

2006 CATERPILLAR CB114, Serial # 0C2Z00192, ID # 050322, 420 Hours, Roller, Hand rail, back up alarm, lights................$14,500 2008 CATERPILLAR CB14, Serial # 0DST00262, ID # 080264A, 325 Hours, Roller, ROPS, Lights, water spray ........................$17,500 2007 CATERPILLAR CB534D, Serial # 0FGH00746, ID # 080519, 2000 Hours, Roller, ROPS/FOPS, Versa Vibe system, Hitch, Water distribution system....................................................................$60,000 2007 CATERPILLAR CB564, Serial # 0C6D00149, ID # 080480, 1622 Hours, Roller, ROPS/FOPS, Versa Vibe system, Hitch, Water distribution system....................................................................$66,444 2011 CATERPILLAR CP56, Serial # 0C5P00527, ID # 100571, 669 Hours, Roller, Erops, A/C, Leveling blade, Vibratory, Pad foot, tires @ 669hrs 97% ..............................................................$132,000 2011 CATERPILLAR CP56, Serial # 0C5P00584, ID # 101032, 972 Hours, Roller, Erops, A/C, Leveling blade, Vibratory, Pad foot ...... ................................................................................................$127,800 2011 CATERPILLAR CS56, Serial # 0C5S01185, ID # 100568, 995 Hours, Roller, Erops, A/C, Smooth drum, Tires @ 995hrs new............ ................................................................................................$123,000 2010 CATERPILLAR CS56, Serial # 0C5S01151, ID # 100408, 1618 Hours, Roller ................................................................$112,444 2010 CATERPILLAR CS56, Serial # 0C5S01182, ID # 100563, 484 Hours, Roller, Erops, A/C ......................................................$123,000 2004 MMD PP80, Serial # VHS1-50151, ID # 250938, Art Vib Roller, 24” smooth drum ............................................................$3,200 SCRAPERS

1972 CATERPILLAR 613, Serial # 071M00954, ID # UT12630, 1104 Hours, Scarper, OROPS, Paddle tires @ 1102HRS RF 20%, LF 95% Rears 25%........................................................................$10,222 1972 CATERPILLAR 613, Serial # 071M01282, ID # UT12629, 2150 Hours, Scraper, OROPS, TIRES @ 25%, NEW FLIGHT CHAINS ....................................................................................................$10,222 SOIL CULTIVATOR

TORO / DINGO TDSC, Serial # 260000109, ID # MS487, Toro Dingo Soil Cultivator ..................................................................$1,725 SPREAD BARS

GME TRENCH PROTECTI GMEA2844, Serial # A28443, ID # X00974, 28” - 44” Adjustable Spreader Bars - GME Aluminum $307 GME TRENCH PROTECTI GMEBAR24, Serial # GMEBAR24TB36, ID # TB36, 8” X 24” Spreader bar set ..........................................$307 GME TRENCH PROTECTI GMEBAR24, Serial # D8851A, ID # X01393A, 8” X 24” Spreader bar set............................................$307 GME TRENCH PROTECTI GMEBAR24, Serial # D8852, ID # X01394, 8” X 24” Spreader bar set ..............................................$307 GME TRENCH PROTECTI GMEBAR24, Serial # D8853, ID # X01395, 8” X 24” Spreader bar set ..............................................$307 GME TRENCH PROTECTI GMEBAR24, Serial # 260592, ID # 260592, 24” Spreader set 4 - GME Trench box............................$307 GME TRENCH PROTECTI GMEBAR36, Serial # TB50, ID # TB50, PRO-TEC set OF 36” Spreader Bars..............................................$307 GME TRENCH PROTECTI GMEBAR72, Serial # GMEBAR72, ID # MS465, 72” Spreader pipe for manhole shields of 4 ..................$307 GME TRENCH PROTECTI GMEBAR72, Serial # 8DS72X02105A, ID # X02105A, 72” Spreader pipe for manhole shields of 4........$307 KUNDEL KUNADJBAR, Serial # KUNAJDX01960A, ID # X01960A, 6” - 24” ADJUSTABLE Spreader Bars 3” - A STYLE 290 LBS....$102 KUNDEL KUNADJBAR, Serial # 270833, ID # 270833, 6” - 24” ADJUSTABLE Spreader Bars 4” - B STYLE 150 LBS..................$102 KUNDEL KUNADJBAR, Serial # 270769, ID # 270769, 6” - 24” ADJUSTABLE Spreader Bars 6” - C STYLE 290 LBS..................$102 KUNDEL KUNADJBAR, Serial # 270838, ID # 270838, 6” 24” ADJUSTABLE Spreader Bars 6” C STYLE 290 LBS ....................$102 KUNDEL KUNADJBAR, Serial # 270834, ID # 270834, 6” 24” ADJUSTABLE Spreader Bars 4” B STYLE 150 LBS ....................$102 KUNDEL KUNADJBAR, Serial # KUNAJDX01961, ID # X01961, 6” 24” ADJUSTABLE Spreader Bars 6” C STYLE 290 LBS..............$102 KUNDEL KUNADJBAR, Serial # 270841, ID # 270841, 6” 24” ADJUSTALE Spreader Bars 6” C STYLE ......................................$102 KUNDEL KUNBAR24, Serial # KUNBAR24X01954, ID # X01954, 24” Spreader BAR (SET OF 4) 6” A-STYLE..................................$102 STACKING PLATES

KUNDEL KUNSPC, Serial # TB12, ID # TB12, Stacking plates for Titan 3/SET4 ......................................................................................$77 KUNDEL KUNSPC, Serial # TB09, ID # TB09, Stacking plates for Titan 5/SET4 ......................................................................................$77 KUNDEL KUNSPC, Serial # TB10, ID # TB10, Stacking plates for Titan 5/SET4 ......................................................................................$77

866-532-9023

STICKS

TRASH PUMPS

CATERPILLAR 307STK, Serial # C063820A1, ID # C063820A1, 307C Stick....................................................................................$1,725 CATERPILLAR 307STK, Serial # C063821A1, ID # C063821A1, 307C Stick....................................................................................$1,725 CATERPILLAR 312STK, Serial # C980258A1-8-2-STICK, ID # C980258A1, 8’2” 312 unit..............................................................$575 CATERPILLAR 320STK, Serial # U320STKMS767, ID # MS767, 320 stick - Part #4I6555 ................................................................$511 CATERPILLAR 330STK, Serial # 1LL23914, ID # MS234, 330DL 10’6” Stick....................................................................................$5,175 CATERPILLAR 365STK, Serial # U365STKMS1324, ID # MS1324, 365 Stick, 13’ 6”“ ........................................................................$6,133 CATERPILLAR 375STK, Serial # C976773A2-9-7- STICK, ID # C976773A2, 9’7” Stick - J Family Bucket Linkage ..................$9,775

2007 Multiquip QP4TH, Serial # 4TH-1010, ID # 270126, 4” Trash Pump ..............................................................................................$613 2011 WACKER PT2A, Serial # 20026982, ID # X110304, 2” Trash Pump ..............................................................................................$511 2011 WACKER PT2A, Serial # 20026983, ID # X110305, 2” Trash Pump ..............................................................................................$511 2011 WACKER PT2A, Serial # 20026984, ID # X110306, 2” Trash Pump ..............................................................................................$511 2011 Wacker PT2A, Serial # 20018198, ID # X110300, 2” Trash Pump ..............................................................................................$825 2011 Wacker PT2A, Serial # 20026979, ID # X110302, 2” Trash Pump ..............................................................................................$825 2011 WACKER PT3A, Serial # 20027091, ID # X110297, 3” Trash Pump................................................................................................$613

STUMP GRINDER

CATERPILLAR SG16B, Serial # 0MAP00679, ID # SG14, SSL Stump Grinder ............................................................................$4,025 SWEEPS

CATERPILLAR MISC ITEMS, Serial # UD6TSWEEPSMS1471, ID # MS1471, D6T SWEEPS..............................................................$3,884

TREE SHREDDER

1900 BROWN BEAR BC283, Serial # BC283-011, ID # BRB01, Tree shredder for HF Skid steer.- 4.14 CI 36” wide motor 4200PSI .... ....................................................................................................$10,222 1900 BROWN BEAR BC283, Serial # BC283-012, ID # BRB03, Tree shredder for HF Skid steer.- 4.14 CI 36” wide motor 4200PSI .... ....................................................................................................$10,222 1900 BROWN BEAR BC283, Serial # BC283-013, ID # BRB06, Tree shredder for HF Skid steer.- 4.14 CI 36” wide motor 4200PSI .... ......................................................................................................$10,22

SWIVEL BRACKETS

TRENCH BOXES

CATERPILLAR 307BRKT, Serial # 264-5907BRK671, ID # BRK671, 307D/308D Swivel Plate - Still need bracket H70-H90, CVP40 $288 CATERPILLAR 307BRKT, Serial # 264-5907BRK691, ID # BRK691, 307D/308D Swivel Plate - Still need bracket H70-H90, CVP41 $288

GME TRENCH PROTECTI GMEBAR32, Serial # 240455, ID # 240455, 32”“X50” Spreader set 4 GME Aluminum trench boxes 136 LBS ..................................................................................................$307 2006 KUNDEL KUN4X10, Serial # 13571, ID # 270793, 4X10 Stacking box -4X10 no knife - B Old style - 2000 LBS............$2,556 2006 KUNDEL KUN4X10, Serial # 13594, ID # 270891, 4X10 Stacking- no knife - 6” C Old style - 3400 LBS........................$2,556 2006 KUNDEL KUN4X10, Serial # 13593, ID # 270792, 4X10 TITAN 5 RAP-O-ROUND Stacker 6” C Old style - 3400 LBS..$2,556 2006 KUNDEL KUN4X10, Serial # 13595, ID # X01938, 4X10 TITAN 5 RAP-O-ROUND Stacker 6” C Old style - 3400 LBS..$2,556 2007 KUNDEL KUN4X8, Serial # 13519, ID # X01944, 4X8 TITAN 5 RAP-O-ROUND Stacker 6” - C STYLE ..................................$2,556

TAIL GATE

MISCELLANEOUS OTHER 740GATE, Serial # 740GATEMS967, ID # MS967, 740 Rumble Gate ......................................................$7,475 TELEHANDLERS

2004 CATERPILLAR TH560B, Serial # 0SLG00694, ID # UT12747 3729 Hours, Telehandler, 4 Wheel drive, 3 Piece boom, Front coupler, Forks, Front Elec. Hook up, Tires @ 3729HRS @ 0%..........$43,956 2003 CATERPILLAR TH560B, Serial # 0SLG00314, ID # UT12746, 4170 Hours, Telehandler, 4 Wheel drive, 3 Piece boom, Front coupler, Forks, Front Elec. Hook up, Tires @ 4170hrs 0-20% .. ....................................................................................................$40,889 2008 JLG INDUSTRIES INC TL1055, Serial # TBM01018, ID # X080390, 2774 Hours, Telehandler ........................................$49,067 2007 JLG INDUSTRIES INC TL1055, Serial # TBM00472, ID # UP11729N, 3854 Hours, Telehandler, All wheel drive, Forks, Tires @ 50% ..........................................................................................$47,022 2007 JLG INDUSTRIES INC TL1255, Serial # TBN00171, ID # UP12165, 4508 Hours, Telehandler, 55’ Lift height, 48” Forks, 4 Mast stages, 12000lbs max lift capacity, 17.5-25 Tires @ 4320HRS, Fronts 99%, RR 70%, LR 50% ..........................................................$53,156 2007 JLG INDUSTRIES INC TL642, Serial # TBK00114, ID # X01448, 4075 Hours, Telehandler, Single joystick, w./ rocker, ROPS, Cab, Aux. Hyd., 4-Speed power shift, planetary drive axle, 4 wheel drive, wet disc service brakes ..................................................$33,733 THUMBS

CATERPILLAR 318TH, Serial # 318TH-T141, ID # T141, Hyd Thumb..........................................................................................$1,725 CATERPILLAR 320TH, Serial # 0PMZ01227, ID # T14, 320 thumb ..........................................................................................................$511 CATERPILLAR BHLT, Serial # 00BT00340, ID # BT340, BHL Thumb Tine B1 Only....................................................................................$575 2003 WERK-BRAU BHLT, Serial # 9695504, ID # 230059, BHL Thumb..............................................................................................$575 TIRES

CATERPILLAR MISC ITEMS, Serial # M318DMHWHEELS, ID # MS831, M318D MH Solid Tires w/Rims..................................$4,600 CATERPILLAR 769TIRES, Serial # U769TIRESCT52, ID # CT52, 769 (7) QTY 1800.33 tires..........................................................$5,111 CATERPILLAR MISC ITEMS, Serial # 249-7841MS1168, ID # MS1168, 17.5R25 BS Tires........................................................$2,300

TRENCH ROLLER

2001 RAMMAX P3324HHMR, Serial # 332303, ID # 210873, 597 Hours, 33” Drum Trench Roller..................................................$1,227 TROLLY CARTS

2010 PARTNER/HUSQVARNA K970 CART, Serial # 20102500043, ID # X100513, HUSQVARNA K970 Trolly cart with water kit............................................................................................$153 2010 PARTNER/HUSQVARNA K970 CART, Serial # 20102500028, ID # X100516, HUSQVARNA K970 TROLLY CART W/ WATER KIT ......................................................................................$153 WALK BEHIND TRENCHER

2005 Vermeer RT200, Serial # 1VRX081F751000692, ID # 250375, 195 Hours, Walk Behind Trencher ..............................$5,000 WATER TANK

CATERPILLAR MISC ITEMS, Serial # MS678WATERTANK, ID # MS678, B Series Water Tank..........................................................$460 WATER TRUCK

1978 CATERPILLAR 769C WW, Serial # 001X00583, ID # UP12537, 4951 Hours, Truck, Cab, A/C, Rigid frame, Retarder, 8000 Gal. water tank, Tires @ 4915HRS, RF 47%, LF 74%, Rears74% ...... ....................................................................................................$22,489 WHEEL LOADERS

2010 CAT 930H, Serial # 0DHC01866, ID # 100161, 755 Hours, WHL, Erops, A/C, Standard front, Tires @ 755hrs avg 92%................ ................................................................................................$140,000 2010 CATERPILLAR 924H, Serial # 0HXC01817, ID # 100579, 3385 Hours, Whl Loader, Erops, A/C, Standard front, Wheel steering ....................................................................................................$92,000 2010 CATERPILLAR 930H, Serial # 0DHC01845, ID # 100440, 464 Hours, Wheel Loader......................................................$143,111 2010 CATERPILLAR 930H, Serial # 0DHC02139, ID # 100580, 1584 Hours, Wheel Loader, Erops, A/C, Quick coupler ......$127,778 2010 CATERPILLAR 930H, Serial # 0DHC01764, ID # 100055, 716 Hours, Whl Loader, Erops, A/C, Standard front, Wheel steering, Tires @ 687hrs 93%..............................................................$141,067

TRACKS

WINCH

CATERPILLAR MISC ITEMS, Serial # 00MS01034, ID # MS1034, 257B2 Set of slightly used tracks ..................................................$575

CATERPILLAR MISC ITEMS, Serial # 9900079, ID # C980758A6, D3C 30B Winch ..........................................................................$5,750

Email: smasisak@clevelandbrothers.com

Page 20 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

3 YEARTY N WARRA A PREMIER HYDRAULIC BREAKER MANUFACTURER FOR OVER 33 YEARS 3 Year Warranty - 2 Moving Parts - No Accumulators 100-12,000 Ft/Lb Product Range

Call: 877-954-9923 FOR DETAILS ON FREE DEMO! The Original MFG TB-Series & VZ-Series Breakers Formerly distributed by Teledyne & BTI

Always ask for Genuine “OEM” Parts 3900 Ben Hur Avenue, Willoughby, Ohio 44094

www.toku-america.com

SALES • SERVICE • PARTS

Wright Express Releases Monthly Construction FCI Results Wright Express Corporation, a leading global provider of value-based business payment processing and information management solutions, in collaboration with IHS a leading global source of information and analytics, Aug. 23 released results of its Wright Express Construction Fuel Consumption Index (FCI), which indicated an increase of 1.4 percent in July versus its level the previous year. The Wright Express Construction FCI measures national fuel consumption statistics for the construction industry, which provides an accurate and up-to-date indication of construction activity in the United States. “The results of the July 2012 Fuel Consumption Index indicate flat growth in the construction industry despite consistent year-over-year growth,” said Rick Pomerleau, vice president, corporate development at Wright Express. “The construction industry hit a speed bump in June, showing the industry is still on a slow path to recovery.” Wright Express worked with IHS to capture and analyze transaction data from its closed loop network of more than 180,000 fuel and vehicle maintenance locations, including more than 90 percent of the domestic retail fuel locations and 45,000

The Wright Express Construction Fuel Consumption Index indicated an increase of 1.4 percent in July versus its level the previous year. vehicle maintenance locations. With this data, the Wright Express Construction FCI can be used to identify emerging trends within the construction industry and the national economy. The indicators were tested at monthly, quarterly and annual frequencies, with the greatest insights produced using the yearover-year percent change of the monthly data. For July 2012, the Wright Express Construction FCI reported that fuel consumption by U.S. construction companies increased by 1.4 percent versus July 2011 and increased by 0.2 percent versus the previous month. The Wright Express Construction FCI, which is available monthly in advance of the U.S. Census Bureau figures on construction

spending, is available at http://www.wrightexpress.com/fci. Last month’s Wright Express Construction FCI diverged from the increased construction spending levels evident in most of the government’s subsequent construction data releases. Construction spending excluding improvements — a good measure of activity — expanded by 0.7 percent in June. Private residential construction increased by 3.1 percent, again reflecting the year’s uptick in single-family housing starts. The decrease in June was reflected in housing permits, which decreased 3.7 percent in June to an annual rate of 755,000 due to a sharp drop in multi-family permits in the South. Total construction put-in-place increased by 0.4 percent in June.

IHS Analysis According to the IHS analysis, the continued flat growth for the Wright Express Construction FCI in July, and with the additional loss in June, indicates a delayed recovery for the construction industry. New home sales fell 8.4 percent in June; however, the loss should not be considered significant due to an anomalous sales plunge in the northeast. Despite the uncharacteristic decrease in June, the housing market remains on track for recovery with the three-month average showing new home sales gradually increasing. The key obstacle to the housing recovery continues to be tight credit conditions, which is why sales to non-investors have been only inching up in recent months, despite low mortgage rates and plenty of affordable homes (in most markets). The homeowner vacancy rate measuring the proportion of homes that are vacant and for sale slipped 2.1 percent in the second quarter of 2012, which is still too high from the “normal” range of 1.6 percent to 1.7 percent. Home prices have been rising slowly in recent months and any gain in prices is good news because the price gains reduce the number of homeowners with “underwater” mortgages.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 21

Concord, NC 800-438-2250

Columbia, SC Jacksonville, FL 800-915-9900 800-828-3055

www.haletrailer.com Weight Laws are Changing! Heavy Haulers: we have the axles, jeeps, flip boxes and spreaders you need. IN STOCK

New East Florida Spec Dumps, 24' x 96" x 60" triaxle suspension, electric tarp

New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys IN STOCK

YOUR DEALER FOR HEAVY HAUL EQUIPMENT

New Manac Steel Drop Deck Extendables 53’-71’x102” wide, 34” Deck Height, Tri-Axle Suspension, Air Lift

NEW Fontaine Steel Flatbeds, 48’x102” Spring Sliding Suspension Winches & Bulkhead Included

New East Hardox Steel Dumps 34' x 96" x 66" SUPER HEAVY DUTY - Demolition Trailer, Air Ride, Barn Door.

New Talbert 20 Ton tags, 21' deck, 6' beaver tail, 17.5 wheels

NEW 65-Ton Capacity Widespread Available: Talbert, Etnyre, Trail King

New East walking floors, 48' long x 102" x 13', spring suspension; Keith walking floor installed.

8,990 LBS.

New Fontaine Velocity Steel Drop Decks, 48’x102”, Air Ride Spread Bulkhead and Winches

New Etnyre 35 Ton & 55 Ton Paver Special Low Boys, Air Ride Suspension, Tandem & Triaxle

New Fontaine Revolution H Composite Flatbeds 48’x102”, Air Spread Suspension Aluminum Wheels, Winches, Also Available in a Drop Deck

New Manac Hardox Steel Dumps, 40’x102”x100”, Single Point Susp, 87 Cu. Yds, Frameless and Frame Type, Also Available w/76” Sides

New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys, 26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available

NEW TALBERT & FONTAINE 5O & 55 TON LOW BOYS, Flat Level Deck & Raised Center, 25’ & 26’ Deck Lengths, (2) King Pin Locations, Automatic 3rd Axle Air Lifts, 275/70R 22.5, 3+1 Capability, In Stock!

Talbert 35 Ton Lowboys 22" Deck Height, Air Ride Suspension

New Landoll 440 & Trail King TK70SA, 50'x102", air ride suspension, 20K winch, wireless remote, PSI system & dock levelers optional

Excellent We Rent Lowbeds WeFinancing Rent Walking Floors Available

View Our Inventory at

www.haletrailer.com

We Rent Lowboys, Blade Trailers, Etc.

Page 22 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Looking for Certified Used Equipment? Have Equipment You’d Like to Sell? Contact:

K.I.T. Equipment

INTRODUCING A NEW E.P.I.C. GENERATION

As a Division of BRAMCO, along with Brandeis Machinery & Supply and Power Equipment, we’re backed by more than 100 years of experience serving construction and mining companies, municipalities and utilities contractors. We have a 30 year history as the authorized Komatsu dealer in Kentucky, Indiana and Tennessee. We’re second to none in understanding the value of your machines and have earned a reputation for fair dealings. Trust K.I.T. Equipment to help with your fleet reduction efforts.

Call John Noble Today: 502-493-4220 1801 Watterson Trail • Louisville, KY 40232

www.kitequipment.com

EQUIPMENT RENTALS FOR CONSTRUCTION & INDUSTRY

EFFICIENT POWERFUL INTELLIGENT COMFORTABLE

For the best in Doosan portable equipment give us a call.

• • • •

Generators Light Towers Dehumidifiers Oil-Free Compressors • Straight Mast Forklifts

• Shooting Boom Forklifts • Portable Dust Collectors • Diesel & Electric Compressors

DEALER IMPRINT IMPRINT AREA AREA www.mayequip.com

Lexington, NC 336-357-5005

Columbia, SC 803-865-1002

103 Bryan St. Jacksonville, FL 32202

904-354-5746

600 N. Commonwealth Ave. Polk City, FL 33868

863-984-6262

888-253-2444 • www.pinnaclecentral.biz

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 23

“The main advantage of using this system has been the time savings... we’ve saved around a month on the contract overall.”

WAT C H YO U R B U S I N E S S

Kevin Primmer, Kelston Sparkes Earth Moving

G R O W. . .

You can supervise all your sites with the Trimble® Connected Community. All connected site data for site positioning, grade control and asset management available on one tool. Share and synchronize data between the office, partners and supervisors to create unprecedented efficiencies on the job site. And, with real-time internet connectivity, Trimble Tablet is the tool that puts you back in the driver’s seat with control over your connected sites. Stakes or no stakes. It’s one more reason why the largest and most successful construction companies are partnering with Trimble.

Shouldn’t you?

Find out more at trimble-productivity.com

exchange data, photos and messages witth the office

Trimble: The Construction Te Technology Authority

www.spectra-is.com

Page 24 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Light Compaction. Hefty Lineup. Bridge repair. Road maintenance. Asphalt. Whatever your application, there’s a Chicago Pneumatic compaction solution for you. From plate compactors and tampers to walk behind double drum rollers and Bluetooth radio-controlled trench rollers, you can count on Chicago Pneumatic equipment for outstanding power and performance.

CALL DOUG OR SAM (866) 485-7180 WWW.RBUSED.COM

ASC Hosts Touch-ATruck

Find a Chicago Pneumatic dealer near you at cp.com or contact us at 800-760-4049.

TRENCH ROLLERS > SOIL & ASPHALT PLATES > FORWARD & RESERVIBLE PLATES > TAMPERS > WALK BEHIND DRUM ROLLERS

cpcompaction.com

People. Passion. Performance.

Dave Parker (R), ASC Construction, lends a hand at the Touch-A-Truck event that took place in Chattanooga, Tenn., early in September. The program was started in 2003 with funds provided by the Tennessee Commission on Children and Youth to provide unique activities that promote child/parent bonding. ASC Construction, as well as other agencies and organizations, were on site to ensure a good time was had by all participants.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 25

Page 26 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Florida’s One Call Shortens Name to Sunshine 811

Beard Equipment hopes to raise between $60,000 and $70,000 for USA Children’s & Women’s Hospital and the Mitchell Cancer Institute.

Beard Equipment Company Rents Out Pink Tractor to Fight Cancer Beard Equipment Company has come up with a novel way to raise support for fighting cancer. Starting on Oct. 1 and continuing for 12 months, Beard Equipment will rent a special pink tractor to customers, with all rental revenue going to USA Children’s & Women’s Hospital and the USA Mitchell Cancer Institute. “While launching our wellness program we recognized that employees, customers, relatives and friends have in some way been touched by cancer,” said Kristen Beard DeLaney of Beard Equipment. “We at Beard Equipment wanted to make a contribution to the cancer research community. “While exploring ways to contribute we realized that we have two outstanding research facilities here in Mobile,” said Brooke Beard Dodson of Beard Equipment. “USA’s Mitchell Cancer Institute and USA Children’s & Women’s Hospital seemed to be ideal organizations to help make a difference.” The attention-getting pink tractor is actually a 22 ton (20 t) excavator, a construction tool for contractors for general site excavation, installation of pipe and utilities and land clearing. The pink paint is being donated by Tommy English of Automotive Paint Supply and PPG. Rental rates are $800 daily, $2,000 weekly and $6,000 monthly. “We have hopes of raising between $60,000 and $70,000 for Children’s & Women’s and the Mitchell Cancer Institute,” DeLaney said. The tractor will be available to rent in Mobile and through Beard Equipment’s Florida locations in Pensacola, Panama City, Freeport, Jacksonville, Lake City and Palatka. For more information about renting the pink tractor, contact Beard Equipment Company in Mobile 1-855-GOBEARD (462-3273). About USA Children’s & Women’s Hospital USA Children’s & Women’s Hospital is among fewer than ten freestanding hospitals in the country dedicated specifically to the health care needs of children and women,

offering Mobile’s only neonatal and pediatric intensive care units, pediatric oncology and sickle cell outpatient center and high-risk obstetrical care. With more than 2,700 births annually, USA Children’s & Women’s Hospital is the area’s leader in deliveries. A major expansion that will nearly double the size of USA Children’s & Women’s Hospital is scheduled to be completed in 2013, recognizing the community’s validation of the hospital’s quality of care and the hospital’s opportunity to continue to meet the needs of a varied and growing population. For more information, visit www.usahealthsystem.com. About the University of South Alabama Mitchell Cancer Institute University of South Alabama’s Mitchell Cancer Institute (MCI) is the only academic cancer research institute in the upper Gulf Coast region, and is the largest single research endeavor in the history of the University of South Alabama. MCI offers cutting edge treatment and research under one roof. The strong spirit of collaboration between clinical care, basic and translational research and the referring physician is what sets MCI apart. The interdisciplinary cancer team works together to develop life-saving treatments for cancer patients. MCI’s vast research initiatives are a key component of its commitment to provide the most advanced and most comprehensive cancer care including the latest treatment technology, CyberKnife Robotic Radiosurgery system and the comfortable treatment environment of its infusion suite. In addition to improving cancer care, the Institute stimulates the growth of a strong regional economy built on biomedicine and biotechnology. Together with the entire USA Health System, USAMCI focuses on discovery and development of new and more effective treatments for cancer. For more information, visit www.usamci.com.

It’s a mouthful to say — Sunshine State One Call of Florida, Inc. — and it’s even harder to remember. So, armed with recent results of a brand identity study conducted by marketing and communications agency MGH, Florida’s one-call center changed its name to Sunshine 811. “We created a 10-minute online survey,” Chris McMurry, MGH senior vice president said. “It was sent to 15,137 email addresses and completed by 413 people. The study focused on brand identity, brand name, brand perceptions, usage of the center and its services.” With a two-decade history in Florida and several names, the study reflected what some already knew — brand confusion. “The study showed that most people remembered ‘sunshine’ in our name, but not the whole name,” Sunshine 811 Executive Director Mark Sweet said. With “Sunshine” as the most consistent word mentioned, MGH recommended the name Sunshine 811. The new name also will be easier to remember because it’s shorter and uses 811, which comes with substantial recognition from momentum built by the national 811 campaign. Early on, there was some concern that using 811 in the name could negatively impact Internet Ticket Entry usage. “We are pleased with an Internet Ticket Entry level of more than 60 percent,” Sweet said. “Nobody wanted to see that percentage decrease.” As a result, Sunshine811.com will be used interchangeably with Sunshine 811 as a dual marketing campaign — one that seeks to attract new users with the easy-to-remember 811 phone number, and another that promotes the fullservice damage prevention resources available to professional excavators. “And there’s always that chance,” Sweet added, “that we’ll attract new Internet users since the name no longer uses ‘call.’” Sunshine 811 currently is rebranding its communications pieces and Web site. “Watch for more exciting things to come,” Sweet concluded, “as we continue striving to make Florida the safest place to dig.”

EVERY MORNING MY HUMAN SHAVES OFF HIS FACE FUR, HE’S FUNNY LIKE THAT. —TUCK adopted 05-04-11

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 27

SANY America Features Full Lines of

Crawler and Rough TTerrain errain er Cranes

Uplifting Performance PIRTEK Becomes Member of American Recyclers Association Recently PIRTEK joined the Automotive Recyclers Association to generate awareness about the services offered by PIRTEK to scrap and recycling companies. Established 1943, the Automotive Recyclers Association (ARA) has represented its industry dedicated to the efficient removal and reuse of automotive parts, and the safe disposal of inoperable motor vehicles. The association services approximately 1,000 member companies through direct membership and more than 2,000 other companies through its affiliated chapters. Suppliers of equipment and services to this industry complete ARA's membership. PIRTEK understands the importance of keeping equipment and work crews up and running. When a hose fails, it can cost recycling businesses thousands of dollars in lost productivity. That’s where PIRTEK can help the ARA members reduce the costs of equipment downtime, idle crews, labor and parts, fuel, overtime and lost opportunity associated with hose failures.

PIRTEK will be exhibiting at the up and coming Texas Automotive Recyclers Association (TARA) being held at the Double Tree hotel in Austin Texas, from Oct. 11 to 13. The PIRTEK booth, will have giveaways and vouchers. Rockledge, Fla.-based PIRTEK offers a 24 hour, 7 day service serving almost every facet of industry including construction, manufacturing, transportation, agriculture and engineering just to name a few. When an equipment breakdown occurs, it often results in costly delays in time and labor before the proper replacement hose is located and installed. PIRTEK vans carry the component parts necessary to manufacture hose assemblies onsite. Hose and fittings also can be purchased over-the-counter at PIRTEK’s Centers which serve as home base to its mobile fleet. There are more than 40 PIRTEK Hose Service & Supply Centers nationwide and a fleet of more than 200 servicing major metropolitan markets throughout the United States.

Crawler Cranes SCC8100 SCC8150 SCC8200 SCC8300 SCC8500

Rough Terrain Teerrain Cranes SRC840 SRC865 SRC865XL SRC885

318 Cooper Circle, Peachtree City, GA 30269 Tel: 678-251-2869 | Fax: 770-631-7731 | Email: sales@sanyamerica.com | www.sanyamerica.com

Page 28 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SANY Builds World’s Largest, Most U.S. Construction Advanced Excavator Factory in China Spending Fell 0.9 SANY has opened the world’s largest and most advanced excavator factory near Shanghai, China, that can produce an excavator every five minutes, according to the manufacturer. The Lingang Industrial Park has 10.7 million sq. ft. of total space, with 5.9 million sq. ft. of manufacturing space. The facility cost $818.5 million to build. The factory uses a computerized production-management system for maximum efficiency, managing the entire process, from raw steel plate to structural welding, to SANY excavators await shipment from the factory in Lingang, China. components and final assembly. Excavator structures and components are transported automatically from underground tunnels to optimize production. The factory will primarily produce excavators in the 20 to 30-ton (18 to 27 t) size range. The facility is unique for its 43,000 sq. ft. of gardens, reflection pools, bamboo stands and marble patios that flank the assembly lines inside the facility. The gardens include palm trees, flowers, grass and fountains. “Our Lingang facility is the most advanced, highest-capacity excavator factory in the world, and SANY produces more excavators globally than most other equipment brands,” said Tim Frank, chairman of SANY America Inc. “North American customers might rightly ask, ‘What’s in it for me?’ It’s simple: robust and reliable structures, cut and welded by precise, fully robotic systems, assembled by a dedicated The new SANY excavator factory south of Shanghai, China, includes team. innovative features such as tranquil fountains, flowers and palm trees. “Our excavator team is experienced at producing almost as many excavators each year as are booms, mixer trucks and batching plants), road machinery sold in the United States by all manufacturers combined,” (motorgraders, rollers, pavers and asphalt batching plants), Frank said. “Add to that robust base the fact that we have port equipment (container reach stackers, empty-container U.S. assembly and component supply in our facility outside handlers, heavy forklifts and gantry cranes), excavators, of Atlanta. You get a great machine at a great price. This is mining equipment (rigid haul trucks, road headers, mining part of SANY’s culture of excellence in manufacturing effi- vehicles, longwall systems and continuous miners), pileciency, and our plan to become a global leader in excava- driving machinery and wind turbines. SANY America Inc. sells, distributes and supports tors.” In addition to excavators produced in Lingang for sale in crawler cranes from 110 to 550 tons (99 to 499 t), rough-terChina, SANY produces base excavator kits that are shipped rain cranes from 40 to 85 tons (36 to 77 t), hydraulic excato SANY America’s assembly facility in Peachtree City, Ga. vators from 7.5 to 33.5 tons, port reach stackers with maxiThe kits are assembled there, adding the options and fea- mum lift of 99,200 lbs. (44,996 kg), and empty-container handlers with maximum load of 19,850 lbs. (9,000 kg). tures preferred by North American customers. SANY is a global leader in the manufacture and sale of SANY America has an operations, assembly and research hoisting equipment (crawler, truck, rough-terrain and all- and development center in Peachtree City, Georgia. For more information, visit www.sanyamerica.com. terrain cranes), concrete machines (concrete pumps, placing

Percent in July By Martin Crutsinger AP ECONOMICS WRITER

WASHINGTON (AP) U.S. construction spending fell in July from June by the largest amount in a year, weighed down by a big drop in home improvement projects. But spending on construction of single-family homes and apartments increased again, a hopeful sign for the modest housing recovery. The Commerce Department said Sept. 4 that overall construction spending declined 0.9 percent in July. It followed three months of gains, which were driven by increases in home and apartment construction. The June decline left spending at a seasonally adjusted annual rate of $834.4 billion. That’s nearly 12 percent above a 12-year low hit in February 2011. Construction activity is roughly half of what economists consider to be healthy. “In short, a weaker than expected report,” said Jim O’Sullivan, chief U.S. economist at High Frequency Economics. Still, O’Sullivan noted that the data are extremely volatile and the trend in residential spending “is clearly still upward.” Spending on residential construction fell 1.6 percent in July from June to a seasonally adjusted annual level of $264.6 billion. But that was dragged lower by a 5.5 percent decline in home improvement projects. Spending on single-family homes rose 1.5 percent, the fourth straight monthly gain. And spending on apartment construction was up 2.8 percent, the ninth straight gain. Separately, CoreLogic, a private real estate data provide, said U.S. home prices jumped 3.8 percent in the 12 months ending in July. The year-over-year increase was the biggest in six years and the third national measure of home prices to show steady gains. Rising prices and higher home sales have made builders more confident in the housing market. A survey of builder sentiment rose in August to its highest level since the housing market went bust five years ago. The gains in housing have been fueled in part by record low levels for mortgage rates. The average rate for a 30-year fixed rate mortgage has been below 4 percent all year. Still, the construction industry remains weak. Spending on nonresidential projects fell 0.9 percent to an annual level of $294.1 billion. Spending on government projects dropped 0.4 percent to a level of $275.7 billion. Spending on state and local building projects fell 0.3 percent, while spending on federal construction projects was down 1.3 percent. Despite the modest gains in housing, the broader economy weakened in the spring. Economic growth slowed to an annual rate of just 1.7 percent in the April-June quarter, down from a 2 percent rate in the first three months of the year. Economists forecast growth will average 2 percent in the second half of the year. That’s not enough to significantly lower the unemployment rate, which stood at 8.3 percent in July.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 29

Page 30 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ARTBA Annual Student Video Contest Winners Announced

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industy acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

A group of 18 high school students from North Carolina and three graduate and postgraduate students from New England were named winners of the American Road and Transportation Builders Association’s (ARTBA) annual “Student Video Contest” on Sept. 10. Sponsored by ARTBA’s Research and Education Division (RED), the contest challenges grade school and post-secondary students to develop a brief video that explores issues relating to America’s transportation network. Students were asked to address how transportation infrastructure is built and paid for, the impacts of traffic congestion, transportation and urban development plans and public perception of transportation development. Submissions were reviewed by a panel of five ARTBA members. The winning entries were shown Sept. 13 during the ARTBA National Convention in Memphis.

undergraduate in media communications, University of Southern Maine; and Adrian Wong-Ken, undergraduate in media communications, University of Southern Maine. One graduate student and two college students from New England created an informative, three-and-half minute video that looked at the congestion caused by outdated traffic signal systems, and presented some innovative ways to make commutes more efficient by integrating existing technology into transportation frameworks. The team

Sponsored by ARTBA’s Research and Education Division (RED), the contest challenges grade school and post-secondary students to develop a brief video that explores issues relating to America’s transportation network.

Category One — Elementary, Middle or High School Students: “How to Solve Congestion” Members of the 2012 Summer High School Transportation Institute at North Carolina A&T State University Eighteen high school students participating in North Carolina A&T State University’s 2012 “Summer High School Transportation Institute” and led by Program Manager Deborah Underwood, created an entertaining and upbeat, two-and-half minute video which provided a simple, yet compelling description of the mobility challenges facing drivers on the nation’s roadways. It offered real-world solutions for relieving congestion, such as high occupancy toll lanes, traffic updates via text message and accelerated bridge construction. The group presented the information using multimodal visuals and interviews with student actors. Category Two — Post-Secondary, College or Graduate Students: “Modernizing Transportation Technology” David Champoux, graduate student in transportation engineering, University of Massachusetts-Amherst; Joseph Smith,

interviewed a transportation engineer and public official in the technology-focused video, and profiled specific projects in which the new traffic signal technology was implemented. Honorable Mention in Category Two — Post-Secondary, College or Graduate Students: “Paying Our Way” Jamesa Marshall, graduate student in civil engineering, University of Wisconsin-Madison Marshall created an illustrated video which provided an in-depth but straightforward description of an alternative financing pilot project conducted by the Oregon Department of Transportation, in which 299 motorists volunteered to pay what is called a vehicle miles traveled tax, or “VMT” rather than a gas tax at the pump. It addressed the benefits and challenges to nation-wide implementation of such a program using creative drawings and narration.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 31

Nissan Forklift Names Winners of Service Excellence Awards Nissan Forklift Corporation announced the winners of its Service Excellence Program (SEP) Awards for the past year. The SEP is designed to reward and recognize those Nissan Forklift dealers who have achieved the highest standards of aftermarket service. Nissan Forklift’s SEP was established in 1995. Its ongoing mission is to provide a comprehensive program for its dealer service network that is based on implementation of best-inclass principles covering technical and customer service practices. Through SEP, Nissan Forklift recognizes those dealers who cultivate an environment for delivering a truly exceptional customer experience, and ultimately achieve a competitive advantage in the markets they serve. Nissan Forklift dealerships that participate in the service excellence program meet standards across seven main categories including business planning, employee competence and customer satisfaction. The standards in each area result in Nissan Forklift dealerships that provide more efficient work order processing and billing, well-trained and certified technicians as well as overall quality products and services for their customers. Those dealers who excel across the categories are rewarded for their efforts by achieving one of the program’s three levels of awards: gold, silver and bronze. Service Excellence Award Winners 2011 Gold level award winners are: • Equipment Depot in Mechanicsburg, Pa. • J.M. Equipment Inc. in Manteca, Calif. • New England Industrial Truck Inc. in Woburn, Mass.

Nissan Forklift dealerships that participate in the service excellence program meet standards across seven main categories including business planning, employee competence and customer satisfaction.

• Nissan Forklift of Michigan in Grand Rapids, Mich. • M & L Industries in Metairie, La. Silver level award winners are: • Adobe Equipment LLC in Houston, Texas • Buffalo Materials Handling in Buffalo, N.Y. • Handling Systems in Phoenix, Ariz. • J.H. Ryder Machinery Ltd. in Mississauga, Ontario • J.M. Equipment Inc. in Sacramento, Calif. • J.V. Equipment in Edinburg, Texas • Liftec in S. Plainfield, N.J. • Lift Solutions in Omaha, Neb. Bronze level award winners are: • A.F. Enterprise in Shreveport, La. • A.F. Enterprise in Longview, Texas • G.W. Van Keppel Company in Kansas City, Kan. • LPM in Bethany, Okla. “Congratulations to our service excellence award winners,” said Dan Domberg, director, customer quality and satisfaction, Nissan Forklift. “The team effort and priority that these dealers have given to achieving total customer satisfaction make them very deserving of this acknowledgement.” About Nissan Forklift Corporation Nissan Forklift Corporation designs, manufactures and supports a complete line of material handling equipment that delivers features resulting in greater dependability, higher productivity and lower operational costs. Headquartered in Marengo, Ill., Nissan Forklift has a network of more than 100 authorized dealerships with over 225 locations across North, South and Latin America, as well as additional worldwide locations. For more information, call 815/568-0061 or visit www.nissanforklift.com.

Page 32 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

‘Lady Crane, ’ Colleagues Close One Door, Open Another

By Jennifer Hetrick EDITORIAL ASSISTANT

As of August 31, Nancy C. Caralla, coined “Lady Crane,” has officially closed the doors on Gulf Crane & Equipment, the company her father had founded in 1971 and which she had owned and operated since her father’s death in 2004. It was not without a sense of sadness and fond memories that the decision was made to retire the family owned business and Caralla stated, “The time had arrived to completely move forward while keeping the solid foundation poured by my father, and carrying forth the business morals, dignity and integrity which Gulf Crane & Equipment was built upon.” That is not to say that Caralla is out of the crane industry. After all, this is a woman who once said she had “cranes in her blood,” and Caralla will be the first to tell you that if you need a crane, crane advice, a crane operator, crane anything, she will certainly be available to help you out through Gulf Winds Renewable-Construction (GWR-C), the company Caralla founded in September 2011. GWR-C is an international company specializing in renewable energy construction projects and headquartered in New Port Richey, Fla., with satellite offices located in Durham, N.C., and Genoa, Italy. Now Caralla, seeing increased interest and necessity in wind energy safety, has partnered with professional wind industry associates and formed the National Wind Technician Organization to give the growing number of professional wind technicians their own venue in which to find products, services and safety education tailored to their professional needs. The National Wind Technician Organization is able to provide safety training services for all personnel involved in the process of building, maintaining, operating, and managing wind turbines and wind sites. Scott Battles, National Wind Technician Organization’s northwest and midwest operations manager stated, “My father was an OSHA compliance officer. I did not realize that having him hammer safety into my head when I was young would be such a strong focus later in my life.” Battles also is a professional wind technician and wind industry educator, who carries a “great interest in and passion for the safety of the wind industry professionals.” In his role as educator, Battles follows his father’s lead, preaching safety to his students every day.

techniques and evacuation techniques all at your site or location. Membership to the National Wind Technician Organization will entitle members to a discount on equipment, for example, harnesses, rescue devices, etc.” Soto has been in the wind industry for more than six years and comes to the National Wind Technician Organization with experience in operations and maintenance, commissioning, site construction, large corrective, recruitment, technical and safety training. Recently, Soto has been focusing on the safety aspect of training entry-level wind technicians in the use of fall protection and working at heights training and has spent a year-and-a-half as a technical instructor and safety trainer. Soto is certified in the following areas: • Miller Fall Protection Competent Person • Skylotec Competent Person (Milan A-024 and A-020) • Siemens Level 2 Basic Harness Instructor • Siemens Safety and Rescue Instructor, Basic Rescue and basic Evacuation • ICM Personal Fall Protection Equipment Product Knowledge Additional members of the National Wind Technician Organization team are: Nancy C. Caralla, East Coast & International operations manager Mike Kyes, ITT administrator Paul Bosworth, UK division administrator Tony DelMonaco, organization photographer National Wind Technician Organization is preparing to open individual memberships for professional wind technicians, wind industry educators, wind industry safety professionals and construction professionals worldwide. Memberships are expected to be available in September, featuring the National Wind Technician Organization “Turbine Card,” filled with tailored discounts from well-known nationwide vendors, franchises and companies only for Photo courtesy of Tony DelMonaco National Wind Technician Organization memThe National Wind Technician bers and handpicked by the organization. A few Organization gives the growing number of professional wind of our membership partners offering their taitechnicians their own venue in lored discounts are: La Quinta Inns & Suites, which to find products, services 1800flowers.com and Enterprise Rent-A-Car. and safety education tailored to The “Turbine Card” will be offered at the low their professional needs. one-year membership fee of $50.00. Students will be offered a twenty-five percent Battles has certifications from FCC licenses to G.E. 1.5 discount off the yearly membership fee: $37.50. Student ID wind turbines to Microwave which have been a surprisingly required. good mix of knowledge bases. Caralla has long proclaimed, “We’re ALL In It Together!” A solid and unique background in communication elec- and the professionals in the wind industry are no exception. tronics, railway, wind turbines and wind farm construction For more information, visit www.nationalwindtech.org enables Battles to provide professionals and students with E-mail: nationalwindtech@yahoo.com first-hand knowledge, along with practical experience when National Wind Technician Organization Facebook page: discussing various aspects of products, service, and safety https://www.facebook.com/nationalwind.technicianorganitopics. zation At the opposite side of the country Matthew Soto serves And follow them on Twitter: @NationalWindTec as National Wind Technician Organization’s southwest operNational Wind Technician Organization ations manager. St. Petersburg, Fla. 33708 (919) 201-1512. “We are certified to train individuals in the use of the (This story also can be found on Construction Skylotec Milan rescue and evacuation devices. We can train Equipment Guide’s Web site at www.constructionequipyou and your employees in harness inspection, basic rescue mentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 33

OPERATING WEIGHTS TO 81,600 POUNDS

BUCKET CAPACITIES TO 2.5 CUBIC YARDS

YANMAR & CUMMINS ENGINES

DIGGING FORCES UP TO 48,559 POUNDS

UP TO 260 HORSEPOWER DIESEL ENGINES

DUMPING HEIGHTS TO 24’4”

DIGGING DEPTHS TO 24’1”

YOU DON’T HAVE TO DIG REAL DEEP... ...TO DIG REAL DEEP

LiuGongNA.com 281-579-8882

You don’t have to have real deep pockets to invest in a LiuGong. LiuGong hydraulic excavators are designed and built to compete value-wise, both in the showroom and out on your next job. With lower ownership and operating costs, you’ll be able to break out of your costly earthmoving routine and make some money with a LiuGong. From a mini-excavator for your next landscaping job to a full-sized machine for some major pipeline chores, check one out at your LiuGong dealer today.

LiuGong is a fifty-plus-year-old construction equipment manufacturer with a huge range of products for the North American quarry, construction, recycling, timber, landscaping, utility and other markets – WHEEL LOADERS. HYDRAULIC EXCAVATORS. BACKHOE-LOADERS. SKID-STEER LOADERS. SOIL COMPACTORS. LiuGong is the only equipment manufacturer to receive the coveted National Quality Award of China and are ISO9001 and ISO14001 certified. Truly a top-shelf, world-class organization.

SELECT DEALER TERRITORIES AVAILABLE

Page 34 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Precast Prison Cell Modules Fabricated Off Project Site COMPLEX from page 1

tion with a close security designation. “Rotondo Weirich provided the precast prison cell modules for the Bledsoe project,” explained Bill Franklin, Rotondo Weirich business development director. “We specialize in precast prison cells and perform this work at or near the project site.” The Lederach, Pa.-based company mobilizes its equipment and personnel and establishes a local casting facility for each project performed. The only PCI certified precast manufacturer in the country that mobilizes its operation to the project site, Rotondo Weirich established a casting facility no more than a few miles from the Bledsoe prison site to form an assembly line process to cast the modules and install the interior furnishings and equipment. “This pre-fabricated approach takes the manufacturing of the prison cells off the critical path of construction,” said Franklin. “We began the set-up of our casting facility in late spring/early summer of 2010. We began casting prison cells in July 2010 and completed the casting in November of the same year.” According to Franklin, “Prefabricated precast prison cells depend on early decisions and approvals from the project owner. Rotondo Weirich mobilizes all of our equipment to the project site including our steel forms to cast the modules. For the Bledsoe project we mobilized three quad forms. Each form is capable of casting a cell module containing four prison cells. The forms produce a module approximately 30 ft. long and 20 ft. wide. We also mobilized a Rubber Tire Gantry Crane with 70-ton capacity at the manufacturing facility, as well as a 300-ton crawler crane to erect the modules into position on the project site.” Crews used local ready mix concrete and welded wire mesh reinforcement to cast the modules. All specialty detention equipment is cast in and installed to complete the modules. This included hollow metal doors and frames, light fixtures, plumbing fixtures, detention furniture and all windows and glazing. The new facility’s cost-saving features include spacious windows and a series of skylights. In addition to five housing units, the prison will reportedly feature buildings for security, administration, visitation, infirmary, cafeteria and work programs. According to numbers released by the TDOC, the total capacity once expansion is complete will be 2,400 beds. There will be 981 existing beds and 1,444 new beds. The estimated cost of overall construction is approximately $208 million. By utilizing existing administrative staff, operational costs at the facility are expected to be signif-

in July 2010 with work substantially complete by October 2011. “One of the biggest challenges was the fact that almost all of the lateral excavation would be in rock,” said Gentry. “To alleviate some of the rock excavation in the geothermal heat exchange field, the decision was made to rock trench the lateral ditches before drilling occurred to expedite the excavations after the drilling was completed. There was more than 15,000 lineal ft. (4,572 m) of 16-

pleted the prison’s roof insulation, membrane and related metal trim and flashings. Work began in September 2010. “This project carried through the winter months, which made it virtually impossible to roof,” explained E. Cornell Malone, contract administrator, Shannon Sumrall. “Projecting up to this time and prioritizing the buildings was a necessity to keep other trades busy and maintain the project schedule. There were 16 buildings composed of concrete, wood and steel decks. Though all have a two-ply SBS system, assemblies were different for each deck type. Staying organized and focused was a must.” Sumrall said 50-ft. (15 m) reach forklifts were used for loading materials to roof areas. Photo courtesy of Rotondo Weirich More than 640,000 sq. ft. Rotondo Weirich uses (59,458 sq m) of roof memsteel forms to cast the modules. For the Bledsoe branes were needed. The roof project the company mobisystem is composed of minilized three quad forms. mum R-21.7 insulation values Each form is capable of with a reflective SopraStar Cap casting a cell module consheet manufactured by Soprema. taining four prison cells. The Bledsoe County prison will house mostly medium-secuicantly lower than if the rity prisoners. One of the most department had built a standinteresting designs involved a alone facility. Experienced pair of tunnels that serve as the staff also are expected to sole entrance and exit for the ensure a stable transition and prison. The tunnels, going under dependable workforce as the Photo courtesy of Jason Gentry of Mid-State Construction fences, reportedly connect to the prison becomes operational. field supply return piping and valving in the geothermal main prison without interrupting Upgrades will be made to Bore pump room of the prison, shown here. a perimeter road around the regional water and electrical systems, according to the TDOC, which offi- in. HDPE distribution piping that needed to structure. Employees, visitors and prisoners cials say will benefit not only the prison, but be installed. The pipe weighed 30 lbs/foot. entering or exiting the site will pass through also the local community. A sophisticated This pipe is heat fusion welded, which the central control area’s prison staff. geothermal heating system will serve the required 9,000 welds and with its weight it Bledsoe is one of only two prisons in the entire prison. The system uses 580 wells to took a great deal of coordination to install. state that have incorporated such a system so circulate air underground where the temper- Also, with 580 bores at 500 ft. deep each to far. Once the prison is ready to officially open ature is 55 to 58 degrees. This reduces the drill the coordination of up to five drill rigs at a time was a challenge. its doors early next year, the inmates will be cost of additional heating or cooling. “This is the backbone of a vertical geot- mostly state prisoners now housed in county Mid-State Construction Co. Inc. was contracted to install the geothermal heat hermal heat and cooling system. The load jails in different regions of the state. exchange field and related distribution pip- that can be handled by a geothermal system Although most will be medium security, is dependent upon the overall bore footage there will be a housing unit for prisoners ing. “This is the largest geothermal heat- drilled for the ground heat exchanger,” classified higher than medium security and a unit to house minimum-security inmates. ing/cooling system installed to date in the Gentry concluded. The drills used to make the 500 ft. bores Considered one of the state’s largest ongostate of Tennessee,” explained Jason Gentry of Mid-State’s geothermal were T-4 Ingersoll Rand down the hole ham- ing construction projects, the Bledsoe division.“Geothermal heating and cooling mer drills. The 16 in. HDPE pipe was County prison is being built on 2,200 acres systems are an energy-efficient alternative fusion-welded, using a McElroy 618 of the Cumberland Plateau. Officials with for the heating and cooling of residential, TracStar Fusion Welder. Materials included the Tennessee Department of Corrections commercial and institutional applications. 585,800 ft. of one-and-one-quarter inch DR- say the additional jobs created by the expanThe more moderate and constant tempera- 9 HDPE pipe for the geothermal heat sion will help to put residents of Bledsoe tures of the earth used by the geothermal sys- exchanger loops, 5,000 ft. of 16 in. DR-11 County to work. They also report that the tem as a heat sink/source are advantageous, HDPE pipe for distribution piping, more new facility should be completed by when compared to the outdoor air used by than 654,000 ft. of HDPE pipe was installed November 2012, with the prison expected to air-source heat pump systems. Geothermal for the geothermal heat exchanger and distri- receive its first inmates beginning in January of 2013. heating and cooling systems use the natural bution piping. The general contractor of the project is This story also can be found on properties of the earth and natural heat transLLC, Memphis, Tenn.. Construction Equipment Guide’s Web site fer to provide heating and cooling to build- Flintco Subcontractors included E. Cornell Malone at www.constructionequipmentguide.com.) ings.” Mid-State drilled the first geothermal bore Corporation of Jackson, Miss., which com- CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 35

Page 36 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 37

NEXT D DAY AY P PAR PARTS ARTS From Fr om Komatsu - The Parts Experts

RISH EQUIPMENT COMPANY www.rish.com Bluefield, WV • 304/327-5124 Chesapeake, VA • 757/485-2100 Chester, VA • 804/748-6411 Coeburn, VA • 276/395-6901 Opal, VA • 540/439-0668 Salem, VA • 540/380-2090 Staunton, VA • 540/887-8291 POWER EQUIPMENT www.powerequipco.com Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283 LINDER INDUSTRIAL MACHINERY www.linderco.com find us on

www.facebook.com/linderindustrialmachinery

Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570 North Carolina Asheville • 828/681-5172 Charlotte • 704/376-7554 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031 South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 North Charleston • 843/552-0095 TRACTOR & EQUIPMENT COMPANY www.tractor-equipment.com

Everywhere in North America If you’re operating Komatsu equipment in North America, you have the peace of mind that comes from 99% next-day parts availability. Your distributor and Komatsu’s network of regional Parts Distribution Centers ensures you have access to the parts you need when you need them most. From coast to coast, and everywhere in between, Komatsu’s staff of trained experts is standing by 24/7 to help with the right parts to keep you up and running.

www.komatsuamerica.com .komatsuamerica.com

Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Mobile • 251/457-8991 Montgomery • 334/288-6580 Shoals Area • 256/383-5666 Tuscaloosa • 205/752-0621 Florida Panama City • 850/763-4654 Pensacola • 850/505-0550 Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500

Page 38 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

VOLVO LOADING ZONE. LET’S WORK. There’s strength in numbers. Breakout force, bucket capacity, daily productivity, fuel efficiency and a wide range of loaders and options - ASC Construction Equipment has the Volvo equipment you can count on. Volvo does the heavy lifting. So you have the capacity for more jobs and bigger profits. Let’s work. Visit your local ASC dealer today.

www.ascvolvo.com CORPORATE

GEORGIA

NORTH CAROLINA

SOUTH CAROLINA

TENNESSEE

Buford 678-318-9500 Savannah 912-964-8079 Forest Park 770-319-0074

Asheville 828-687-0620 Charlotte 704-596-8283 Greenville 252-754-5280 Raleigh 919-661-8710

Charleston 843-414-1120 Columbia 803-791-0740 Piedmont 864-704-1060

Chattanooga 423-308-7940 Knoxville 865-525-1845

704-494-8100

Volvo Construction Equipment

The Rental Show Returns to Las Vegas in ’13 Ê

Ê Ê

In Las Vegas, it’s all about increasing your odds — and the same holds true for The Rental Show, which will be held there next Feb. 10 to 13. Every aspect of the American Rental Association’s 57th annual convention and rental trade show is designed with one thing in mind: helping attendees make more money. The Rental Show moves to a new venue for 2013, The Sands Expo and Convention Center, which is located in the center of the famous Las Vegas Strip. And while the new site provides new opportunities for dining and entertainment, the core factor of helping attendees be profitable remains the same. “The Rental Show is right on the money for rental success,” said Allison Box, ARA senior administrative director of association services. “We’re using ‘right on the money’ as the tagline for The Rental Show 2013 because it’s true — this is the show for people serious about profit. All elements of the

ÊÊ

show, from new rental products to fresh educational ideas from the seminars and relationships that develop in connecting with other rental business owners and suppliers, are designed to focus on making attendees more profitable.” Highlights of the 2013 schedule include: • A full day of 16 seminars on Sunday, Feb. 10, with topics that range from industry updates to Tier IV engines and healthcare to being profitable in the new economy. Financial sessions with Steve Abercrombie also are on the agenda, as well as Internet marketing with David McBee. In addition, the rental town hall seminars return on Feb. 12. There also will be a new “Wednesday Wake-Up” session on Feb. 13 with Lt. Col. Rob “Waldo” Waldman. • The keynote session featuring Captain Mark Kelly, who will share his story of courage and hope — from his space shuttle missions to his wife Gabrielle Giffords’ recov-

ery from a January 2011 assassination attempt. His keynote address will touch on what he’s learned from his experiences including the importance of leadership and teamwork. The keynote session is sponsored by Ditch Witch. • Three days of trade show, Feb. 11 to 13, with the latest rental equipment for construction/industrial, general tool/homeowner and party/special event businesses. • New events including “A Night in Fabulous Las Vegas” at Harrah’s Las Vegas, which will transport you back to the Rat Pack’s vintage Vegas days, and the new ARA Young Professionals Network reception at FIRST Food and Bar that’s for rental professionals between the ages of 18 and 40 and their parents. • Other popular networking events will return, such as Lunch With ARA, regional receptions, the international reception and the Reception With a Purpose featuring the ARA Foundation charity auc-

tion. • Events & Tents will have a new full-day schedule on Feb. 9 and will include a Fabric Fashion Show that morning and a lunch session with wedding designer Sasha Souza, in addition to 16 seminars specifically for those in party/special event rental. A special reception will close out Events & Tents at Keep Memory Alive, a Frank Gehrydesigned venue that supports the Cleveland Clinic’s Lou Ruvo Center for Brain Health. Registration for The Rental Show opened Sept. 5, on the show’s Web site, TheRentalShow.com. A special Internet-only registration rate of $119 per person for ARA members is available for a limited time. This rate is for full registration, which includes the seminars on Feb. 10, 12 and 13; the keynote session on Feb. 11; and the trade show Feb. 11 to 13. For more information, call 800/334-2177 or visit www.TheRentalShow.com.

I’VE NEVER UNDERSTOOD WHY MY HUMAN WON’T LEAVE THE HOUSE WITHOUT HER LEASH. I THINK SHE’S AFRAlD OF GETTING LOST. BUT IT’S OK, I KIND OF LIKE SHOWING HER AROUND. — HARPER adopted 08-18-09

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 39

MAXIMIZE EFFICIENCY. MINIMIZE COSTS. LET’S WORK. Volvo Construction Equipment offers equipment that’s ideal for quarry work. Our wheel loaders feature our exclusive OptiShift technology for exceptional fuel efficiency, while our articulated haulers are designed for quick transport of aggregates. With the support of over 300 dealer locations across North America, the result is greater productivity for your crew – and a higher earning potential for you. Learn more about OptiShift by contacting a Volvo dealer near you. Visit volvoce.com/na today. FLORIDA FLAGLER CONSTRUCTION EQUIPMENT LLC WWW.FLAGLERCE.COM 9601 BOGGY CREEK ORLANDO, FL 407-659-8700 407-659-8720 (FAX) DAVIE 954-581-4744 JACKSONVILLE 904-737-6000

ORLANDO 407-850-9614 TAMPA 813-630-0077 FT. MYERS 239-481-8554

FLORIDA COWIN EQUIPMENT CO., INC. 7950 PITTMAN AVE. PENSACOLA, FL 32534 800-239-4736 850-479-3004

Volvo Construction Equipment

VIRGINIA MCCLUNG-LOGAN EQUIPMENT COMPANY CHESAPEAKE 757-485-3314 RICHMOND 804-266-0000 ROANOKE 540-989-3750

WISE 276-328-8027 MANASSAS, VA 703-393-7344 WINCHESTER, VA 540-722-3700

ALABAMA COWIN EQUIPMENT CO., INC. BIRMINGHAM 800-239-2694 MOBILE 800-223-6755 MONTGOMERY 800-239-6642

MADISON 256-350-0006 HUNTSVILLE 800-239-7368 OXFORD 800-917-7931

GEORGIA ASC CONSTRUCTION EQUIPMENT SAVANNAH 912-964-8079 BUFORD 678-318-9500 FOREST PARK 770-319-0074

SOUTH CAROLINA ASC CONSTRUCTION EQUIPMENT COLUMBIA 803-791-0740 PIEDMONT 864-704-1060 NORTH CHARLESTON 843-414-1120

NORTH CAROLINA ASC CONSTRUCTION EQUIPMENT ASHEVILLE 828-687-0620 CHARLOTTE 704-596-8283 RALEIGH 919-661-8710 GREENVILLE 252-754-5280

TENNESSEE ASC CONSTRUCTION EQUIPMENT CHATTANOOGA 423-308-7940 KNOXVILLE 865-525-1845

Page 40 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

John Deere 400D Articulated Truck, 1:50 Scale $40

Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $75 Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale ....................................................................................$75 Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale..$75 Allis-Chalmers HD-41 Dozer, 1:25 Scale ....................$200 Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$60 Bantam C-35 Crawler Shovel, 1:50 Scale ....................$70 Bantam Shovel Mounted on a White Truck, 1:50 Scale $75 Bobcat E35 Compact Excavator, 1:25 Scale ................$50 Bobcat M400 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat M610 Golden 50th Anniversary Skid Steer Loader..............................................................................$25 Bobcat S175 Skid Steer Loader, 1:25 Scale ................$40 Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer Set, 1:50 Scale ................................................................$60 Bobcat 773 50th Anniversary Skid Steer Loader, 1:25 Scale ................................................................................$25 Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ......$25 Bobcat 2008 Road Tour Semi Tractor/Trailer, 1:64 Scale .. ..........................................................................................$25 Case CX210B Excavator, 1:50 Scale ............................$40 Case 330B Articulated Truck, 1:50 Scale......................$40 Case 1850K Dozer, 1:50 Scale ......................................$40 Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale .. ..........................................................................................$50 Caterpillar AP655D Paver, 1:50 Scale ..........................$50 Caterpillar D4E Track-Type Tractor, NZG, 1:50 Scale ..$80 Caterpillar D7E Track-Type Tractor, 1:50 Scale............$85 Caterpillar 140H Motor Grader, 1:50 Scale ..................$60 Caterpillar 297C Multi-Terrain Loader, 1:32 Scale........$45 Caterpillar 308C CR Mini-Excavator, 1:50 Scale ..........$50 Caterpillar 365B Excavator, 1:50 Scale ........................$70 Caterpillar 365C Front Shovel, 1:50 Scale ..................$110

John Deere 850J Military Dozer, 1:50 Scale $50

John Deere 624K Wheel Loader, 1:50 Scale $45

All New in Box

John Deere 624K Military Wheel Loader, 1:50 Scale ..$35 John Deere 872 GP Motor Grader, 1:50 Scale..............$50 Komatsu D51 PX Dozer, 1:50 Scale ..............................$65 Komatsu D375 Dozer, 1:50 Scale ..................................$90 Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80

CALL Toll Free

Komatsu HM250 Articulated Truck, 1:50 Scale ............$70

800-523-2200

Komatsu PC14R Mini-Excavator, 1:32 Scale ................$40

Ext. 197

Komatsu PC350LC Excavator, 1:50 Scale ....................$90 Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$200 Komatsu SK1020 Skid Steer Loader, 1:25 Scale ........$35

Caterpillar 416 Backhoe/Loader, 1:32 Scale ................$75 Caterpillar 432E Backhoe/Loader, 1:50 Scale ..............$70 Caterpillar 906H Compact Wheel Loader, 1:50 Scale ..$45 Caterpillar 977 Traxcavator, 1:50 Scale ........................$55 Caterpillar 980G Wheel Loader, 1:50 Scale ..................$50 Caterpillar Military 924H Versalink Loader in Desert Camouflage, 1:50 Scale ..................................................$45 Caterpillar Military 120M Motor Grader in Desert Camouflage, 1:50 Scale ..................................................$70 Doosan Moxy MT31 Articulated Truck........................$115 Euclid R32 Off-Highway Truck, 1:50 Scale ..................$35 Hamm GRW280 Compactor w/Cabin............................$75 Hamm 3307 Compact Roller, 1:34 Scale ......................$45 Hitachi EH700 Off-Highway Truck, 1:50 Scale..............$35 International "S" Series Dump Truck,1:25 Scale ......$125 International TD-15 Dozer, 1:50 Scale ..........................$60 International TD-20E Dozer, 1:64 Scale ........................$24 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................$60 International TD-24 Military Dozer, 1:50 Scale ............$45 JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$50 JCB 525-58 Compact Loader, 1:35 scale ......................$35 John Deere 200C LC Excavator ....................................$40

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Komatsu SK1026 Skid Steer Loader, 1:25 Scale ........$35 Komatsu WA470 Wheel Loader, 1:50 Scale..................$60 Komatsu WA500 Wheel Loader, 1:50 Scale..................$90 Komatsu WB146 Backhoe/Loader, 1:50 scale..............$60 Komatsu 475A-5EO Dozer, 1:50 Scale ........................$125 Kubota KX121-3 Compact Excavator, 1:24 scale ........$50 LeTourneau Military Super C Scraper, 1:50 Scale ......$35 Liebherr TA230 Articulated Truck, 1:50 scale ............$130 Link-Belt 800 X2 Excavator,1:50 Scale........................$240 Link-Belt 80100 Rough Terrain Crane ........................$190 Mack Granite MP Dump Truck w/ Beavertail Trailer, 1:50 scale................................................................................$110 Mack Granite MP w/ Bottom Dump Trailer ..................$85 New Holland 555 Skid Steer Loader, 1:25 scale ..........$30 Northwest 25-D Shovel, 1:50 Scale ..............................$85 Peterbilt 367 Dump Truck w/ Beavertail Trailer, 1:50 Scale ........................................................................................$120 Terex RC45 Rough Terrain Crane, 1:50 Scale ............$180 Vogele Vision 5200-2 Paver, 1:50 Scale ......................$140 Volvo A25D Articulated Truck, 1:50 Scale ....................$60 Volvo L70E Wheel Loader w/Attachments, 1:50 Scale$95 Volvo SD-122 Soil Compactor, 1:72 scale ....................$25 Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale ..........$70

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 41

Cash is king – Make more money & spend less with Hyundai 9 Series machines.

VALUE

• More Standard Features • Industry-Best Total Coverage Warranty • Hi-mate Remote Management service – FREE for 3 years • Industry-Leading Fuel Economy

ALABAMA

ARKANSAS

Pittman tractor co. inc. Daphne, AL 251/621-3555

EQUiPmEnt rESoUrcE manaGEmEnt inc. North Little Rock, AR 501/223-8604

3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty

NDA

Industry’s Best Total Coverage Warranty:

• Industry-Leading Cycle Times

R R A N

GEORGIA GrovE rivEr Richmond Hill, GA 912/756-7854

naSSEr HEavY EQUiPmEnt Lawrenceville, GA 770/995-6663 Cumming, GA 770/889-5004 Villa Rica, GA 678/941-1100

www.hyundaiamericas.com

MISSISSIPPI

TENNESSEE

miD SoUtH macHinErY Gulfport, MS 228/867-1555 Jackson, MS 601/948-6740 Tupelo, MS 662/690-6553

DiamonD EQUiPmEnt La Vergne, TN 615/641-1100

Page 42 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 44 â&#x20AC;˘ October 3, 2012 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ Mini & Compact Equipment Section â&#x20AC;˘ Construction Equipment Guide

CASE AUTHORIZED DEALERS

ALABAMA

TENNESSEE

1 Source Power & Equipment

Abby Equipment

Mobile

Millington

(251) 380-7800

(901) 840-1200

Cowin Equipment Company

Contractors Machinery

Birmingham Madison Montgomery Oxford

Johnson City Louisville

(205) 841-6666 (256) 350-0006 (334) 262-6642 (256) 832-5053

(423) 975-9111 (865) 982-6452

Diamond Equipment La Vergne

(615) 641-1100

Liles Brothers

ARKANSAS

Jackson

(731) 423-1637

Heartland Equipment Jonesboro

(870) 932-8383

Potter Equipment Company Harrison

(870) 741-8900

Scott Equipment Company Fort Smith Mabelvale Springdale Texarkana

(479) 648-1600 (501) 455-5955 (479) 751-4242 (870) 772-0204

(239) 690-0661 (305) 821-2273 (407) 888-0024 (813) 621-5811 (561) 296-9710

Border Equipment (706) 737-9191 (770) 322-6960 (912) 748-2828

Central Georgia Equipment (478) 956-3833

Haney Farm & Ranch Rockmart

(770) 684-7277

Vaughters Tractor Company Gainesville

(770) 536-1455

Wallace Truck & Equipment Valdosta

WWW CASECE COM s #!3%

ÂŠ2012 ÂŠ2012 CNH C N H America A merica LLC. L LC. All A ll rights rights reserved. reser ved. CCase ase iiss a rregistered egistered ttrademark rademark ooff CCNH N H AAmerica merica LLLC. LC. w www.casece.com w w.casece.com

(337) 837-6694 (337) 625-5942

Crawler Supply Company Baton Rouge

(225) 357-7515

Lee Tractor Company St. Rose

(504) 467-6794 (985) 876-2280

Scott Equipment Alexandria Monroe Shreveport

(318) 448-1647 (318) 387-4160 (318) 226-9696

MISSISSIPPI Abby Equipment

GEORGIA

Byron

Broussard Sulphur

Houma

Trekker Tractor

Augusta Conley Pooler

CLM Equipment Company

M & L Industries

FLORIDA Fort Myers Hialeah Gardens Orlando Tampa West Palm Beach

LOUISIANA

(229) 219-7641

Saltillo Walnut

(662) 869-2432 (662) 223-5347

Ayres - Delta Implement Leland

(662) 686-2361

Hood Equipment Batesville Bruce

(662) 563-4546 (662) 983-7181

JWH Equipment Jackson

(601) 974-8090

Lee Tractor Company Biloxi

(228) 392-9922

Stringerâ&#x20AC;&#x2122;s International Clarksdale

(662) 624 4305

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 45

NORTH CAROLINA

Ditch Witch, Charles Machine Works Unveil RT80 Quad Ride-On Trencher

Hills Machinery Greenville

(252) 752-7145

SOUTH CAROLINA Hills Machinery Columbia North Charleston

(803) 658-0200 (843) 225-9377

VIRGINIA Lawrence Equipment Ashland Cloverdale Waynesboro

(804) 752-8333 (540) 966-0151 (540) 942-2610

Vernon E. Stup Company Clear Brook

(540) 662-8266

The Ditch Witch RT80 Quad is a heavy-duty ride-on trencher and vibratory plow designed to provide the power, durability, stability and traction contractors need for both short and long utility installations. The RT80 Quad is completely designed and manufactured by The Charles Machine Works (CMW) to provide traction and performance on rough and uneven terrain. With its power and compact footprint, the RT80 Quad can handle any type of utility installation, short or long drops, on either tight or wide-open job sites, according to the manufacturer. The 83-hp (62 kW) RT80 Quad features a three-speed, shift-on-the-fly ground drive that provides the power necessary to tackle any job site with the machine’s vibratory plow, traversing trencher, saw or backhoe attach- The Ditch Witch RT80 Quad is a heavy-duty ride-on trencher and vibratory plow for both short and long utility installations. ments. Equipped with a heavy-duty undercarriage and components, the RT80 Quad is ideal for attachments and other working parts. The heavy-duty H810 installing utilities in some of the toughest job site conditions. centerline trencher is capable of trenching up to 24 in. (61 Its axle capacity offers static load rating of 39,000 lb. (17,690 cm) wide. The RT80 Quad’s backfill blade arm helps prokg) and a 30,742 lb. (13,944 kg) of breakout. The machine’s vide maximum lift and features the same heavy-duty design track frames pivot about the centerline of the axle, a design as the Ditch Witch RT115 Quad, for strength and durability. Other standard features of the RT80 Quad include rear that provides enhanced machine stability especially in muddy conditions or when applying very high torque to pull steering, which helps improve maneuverability on tight job through hard ground. And the chevron-pattern design of the sites, and cruise control, which enables the operator to mainRT80 Quad’s track system helps reduce mud buildup, result- tain optimal digging performance regardless of ground coning in improved traction in wet conditions and on slopes, ditions. For more information, call 800/654-6481 or visit according to the manufacturer. The heavy-duty nature of RT80 Quad extends to its www.ditchwitch.com.

The 83-hp (62 kW) RT80 Quad features a three-speed, shift-on-the-fly ground drive that provides the power necessary to tackle any job site with the machine’s vibratory plow, traversing trencher, saw or backhoe attachments.

Page 46 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Tramac by Montabert Debuts Four New Plate Compactor/Driver Models Tramac by Montabert released four new plate compactor/driver models to expand the Tramac product line and make compact soils trenches, seawalls, slopes and foundations a quick, safe and efficient process. Featuring a flat top mount design, the Tramac plate compactors can easily be mounted to different carriers up to 100,000 lbs. The flattop design allows a bracket cap to be added to the attachment based on the specific machine being used. Four outboard shock mounts distribute vibrations evenly while keeping the attachment level, improving compaction efficiency and extending component life. A standard flow control valve and pressure relieve valve prevent over-speeding, which can lead to poor compaction and reduce bearing life. Applications for the plate compactor attachments include compacting trenches, gravel or asphalt; footings slab areas and slopes. The plate compactor also is very efficient for seawalls, sheet pile and posts driving. An excavator-mounted plate compactor attachment provides more powerful compaction force than handoperated compactors and reduces the need for workers Featuring a flat top mount design, the Tramac plate compactors can easily be in the trench. The plate com- mounted to different carriers up to 100,000 lbs. pactor operating system combines maximum eccentric weight with the exact propor- dynamic force is 3,400 lbs. and the compaction frequency is tions of amplitude and vibration frequency necessary to gen- 2,100 vibrations per minute (vpm). The PCT64 is approved for carrier weight ranging from erate the most effective centrifugal force, according to the 9,920 to 33,070 lbs. (4,500 to 15,000 kg). The attachment’s manufacturer. Stephane Giroudon, brand manager stated, “We are very dynamic force is 6,400 lbs. and the compaction frequency is excited about the release of the new Tramac by Montabert 2,000 vibrations per minute (vpm). The PCT114 is approved for carrier weight ranging from compactor line. This is a completely new and innovative design that includes a flow control and a pressure relieve 15,870 to 55,115 lbs. (7,198 to 25,000 kg). The attachment’s valve. It does not require a case drain for an easy installation dynamic force is 11,350 lbs. and the compaction frequency on any excavators and backhoe loaders. The addition lends is 2,000 vibrations per minute (vpm). The PCT220 is approved for carrier weight ranging from us the opportunity to display our company’s capabilities, to yet again, marry innovation and design while simultaneous- 54,000 to 143,300 lbs. (25,000 to 65,000 kg). The attachly upholding the legacy of delivering a reliable and quality ment’s dynamic force is 22,000 lbs. and the compaction frequency is 2,100 vibrations per minute (vpm). product to our extensive network of dealers.” For more information, visit The PCT 34 is approved for carrier weight ranging from 5,512 to 14,330 lbs. (2,500 to 6,500 kg). The attachment’s www.tramacbymontabert.com.

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 47

Page 48 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

CH HECK OUT TH HE LINEUP P OF O ATT COMPA PACT TTRACK LOAD BOBCAT DERS AT ON OFF THES ONE T SE AUTHORIIZED BOBCAT AT D AT DEALERS. ALABAMA AL ABAMA

Bo Bobcat bcat of of P Palm alm Bea Beach ch

N NORTH ORTH CA CAROLINA ROLINA

Bobcat Bobcat ooff M Mobile obile

We West st P Palm alm B Beach each

Bo Bobcat bcat ooff Charlotte Charlotte

P Pompano ompano Beach Beach

704-343-2200 704-343-2200 rrsbraswell.com sbraswell.com

M Mobile obile

s s lylemachiner y.com lylemachinery.com

s s

Charlotte C harlotte

Bobcat Bobcat ooff O Oxford xford

9954-763-9880 54-763-9880 bobcat.sbequipment.com bobcat.sbequipment.com

Oxford Ox ford

N Novia ovia IIndustries ndustries LLC L LC

256-831-1870 256-831-1870 bbobcatofoxford.com obcatofox ford.com

O Ocala, cala, FFLL

s s

3352-789-6818 52-789-6818 noviaindustries.com noviaindustries.com

s s

Bobcat Bobcat ooff tthe he W Wiregrass iregrass D Dothan othan

GEORGIA GEORGIA

TTriangle riangle EEquipment quipment Co Co.. M Morrisville orrisville Garner G arner

Wilmington Wilmington

334-792-5121 334-792-5121 bobcatofthewiregrass.com bobcatof thewiregrass.com

B Bobcat obcat of of A Atlanta tlanta

FFLORIDA LORIDA

7770-242-6500 70-242-6500

Bobcat B obcat ooff C Central entral Florida Florida

S SOUTH OUTH C CAROLINA AROLINA

Marietta Mariet ta

TTampa ampa B Bay ay

B Bobcat obcat ooff Greenville Greenville

s s

770-850-1443 770-850-1443 bobcatofatlanta.com bobcatofatlanta.com

s s

Orlando Orlando

Bobcat Bobcat of of Savannah Savannah

407-273-7383 407-273-7383 cfbobcat.com cfbobcat.com

B Bloomingdale loomingdale

s s ncbobcat.com ncbobcat.com

A Atlanta tlanta

Bobcat Bobcat ooff FFort ort M Myers yers

s s sseequipinc.com eequipinc.com

FFort or t Myers Myers

B Bobcat obcat of of Thomasville Thomasville

2239-334-4987 39-334-4987

TThomasville homasville

Naples N aples

22 229-225-9644 9-225-9644 bbobcatofthewiregrass.com obcatof thewiregrass.com

239-530-0406 239-530-0406 bbobcat.wej-fl.com obcat.wej-fl.com

Rhinehart Rhinehart Equipment Equipment Company Company

Bobcat Bo bcat of of Me Metro tro D Dade ade

Ro Rome me

Hialeah Hi aleah G Gardens ardens

7706-232-8962 06-232-8962 bobcat.rhinehartequipment.com bobcat.rhinehar tequipment.com

s s bbobcatofmetrodade.com obcatofmetrodade.com

Bobcat Bo bcat of of Ja Jacksonville cksonville JJacksonville acksonville 9904-288-9181 04-288-9181 bbobcatjax.com obcatja x.com

BBobcat® ob c a t ® aand nd tthe h e BBobcat ob c a t logo lo go are a r e registered r e gis t e r e d trademarks t r a d e m a r k s of of Bobcat B ob c a t Company Co m p a ny in in the t h e United Unit e d SStates t ates aand nd vvarious a rious oother t h e r ccountries. oun t rie s. ©2012 © 2 0 12 Bobcat B ob c a t Company. Co m p a ny. All A ll Rights Righ t s Reserved. R e s e r v e d. | 0912603 0 9 12 6 0 3

M MISSISSIPPI ISSISSIPPI B Bobcat obcat of of G Gulfport ulfport Saucier Saucier 2228-832-7575 28-832-7575 llylemachinery.com ylemachiner y.com

Piedmont Piedmont

Charleston Charleston

s s

Columbia Columbia

s s

Spartanburg Spar tanburg

s s seequipinc.com seequipinc.com

TTriangle riangle EEquipment quipment Co Co.. Myrtle Myr tle Beach Beach

s s ncbobcat.com ncbobcat.com

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 49

ONE VS MANY

COMPACT TRACK LOADERS FACE OFF

Scan the code. Watch the videos. See compact track loaders go head to head. Visit BobcatAdvantage.com/CTLfaceoff15 to see more and find out who comes out on top.

www.BobcatAdvantage.com/CTLfaceoff15

Page 50 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Soft Ride Solid Tires For Skid Steers and Wheel Loaders Extra deep lugs for traction Tough rubber compounding

Large in stock inventory Backhoe conversions also available

www.advancetires.com • (800) 445-6647 Mention this ad for discounted shipping

JCB’s New 8055 RTS Adds More Power, Maneuverability Due to a number of recent enhancements, JCB’s 8055 RTS mini-excavator now combines even more power and maneuverability into one compact package. The 8055 RTS weighs in at 12,125 lbs. (5,500 kg), improving its lift capacity up to 10 percent and enabling operators to complete jobs in less time. A new 44.4 hp (33 kW) Perkins engine decreases fuel consumption up to 10 percent, reducing operating costs. In addition to the 8055’s standard 75 in. (190.5 cm) dipper and optional 59 in. (150 cm) dipper, a third dipper — the 68 in. (173 cm) — is now available. This new dipper increases the machine’s stability when using tilting buckets and quick hitches, according to the manufacturer. The 8055 RTS continues to offer impressive break-out forces and high lev-

els of tractive effort and tracking speeds. A dump height of 13 ft. 6 in. (4 m) and dig depth of 12 ft. 4 in. (3.7 m) make the 8055 RTS more versatile on the job site. Single-acting auxiliary pipework to the dipper powers breaker attachments, while optional double-acting pipework lets users switch between single and double. Straight-line tracking gives precise control when positioning the excavator next to obstacles or during loading and unloading, but also allows safe travel without veering off when a service is operated. For more information, call 912/447-2000 or visit www.jcbna.com.

The 8055 RTS weighs in at 12,125 lbs. (5,500 kg), improving its lift capacity up to 10 percent and enabling operators to complete jobs in less time.

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 51

Alabama COWIN EQUIPMENT CO. Birmingham (205) 841-6666 Huntsville (256) 350-0006 Mobile (251) 633-4020 Montgomery (334) 262-6642 Oxford (256) 832-5053

Arkansas THE G.W. VAN KEPPEL CO. Little Rock (501) 945-4594 Van Buren (479) 474-5281

Florida COWIN EQUIPMENT CO. Pensacola (850) 479-3004 GS EQUIPMENT Davie/Ft. Lauderdale Ft. Myers Jacksonville Orlando Tampa

(954) (239) (904) (407) (813)

327-8808 334-6063 268-4400 859-9160 248-4971

Georgia COWIN EQUIPMENT CO. Mableton (404) 696-7210

Louisiana CLM EQUIPMENT CO., INC. Broussard (337) 837-6693 Sulphur (337) 625-5942 HEAVY MACHINES, INC. Shreveport (318) 621-0854 QUEST CONSTRUCTION Gonzales Lake Charles St. Rose

EQUIPMENT (225) 450-6425 (337) 436-7726 (504) 467-7663

North Carolina CCS EQUIPMENT SALES Youngsville (919) 556-9110 MAY HEAVY-EQUIP RENTALS & SALES Lexington (866) 629-3784

South Carolina MAY HEAVY-EQUIP RENTALS & SALES Columbia (888) 865-1002

Tennessee CUMBERLAND TRACTOR & EQUIP, LLC Nashville (615) 865-7800 FINLEY LLC a DIV of HMI, INC. Gray (423) 282-5462 HEAVY MACHINES, INC. Memphis (901) 260-2200

Virginia ELLIOTT & FRANTZ, INC. Manassas (703) 257-2381 LINK-BELT MID ATLANTIC Ashland (804) 798-2290 Chesapeake (757) 485-4485

Puerto Rico PUERTO RICO WIRE PRODUCTS, INC. San Juan (787) 288-8080

Page 52 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

www w.jcbna.com

BIG RESULTS.

VISIT THE JCB DEAL LER NEAREST Y YOU OU MacKinnon JCB

JCB of Alabama

2230 N US Hwy 301 Tampa, FL 33619 813-621-4671

8920 Weaver Ave Leeds, AL 35094 866-480-6125

1915 N Orange Blossom Tr Orlando, FL 32804 877-205-6098

791 Anderson Rd Montgomery, AL 36110 866-954-6522

6907 Broadway Ave Jacksonville, FL 32254 877-218-5638 2755 Marshall Dr Tifton, GA 31793 877-462-3250 www.mackinnonjcb.com

www.jcbofalabama.com

Valley JCB (a division of Valley Supply & Equipment)

8192 Euclid Ct Manassis Park, VA 20111 703-330-5579 www.valleyjcb.com

JCB of Nashville 618 N Main St Goodlettsville, TN 37072 615-851-4345 181 Industrial Blvd LaVergne, TN 37086 615-793-8100 www.tuffequipco.com

JCB of Chattanooga 1609 Church Rd Chattanooga, TN 37421 423-899-1219 www.jcbofchattanooga.com

JCB of South Florida JCB of Georgia (a division of Florida Coast Equipment)

9775 W Boynton Beach Blvd Boynton Beach, FL 33437 561-369-0414 15900 Westpark Ln Fort Pierce, FL 34945 772-461-1003 www.jcbofsouthflorida.com

1008 E Hwy 80 Pooler, GA 31322 888-431-0130 2679 Barrett Lakes Blvd Kennesaw, GA 30144 678-594-5400 4008 Mike Padgett Hwy Augusta, GA 30906 888-431-0130 www.jcbofgeorgia.com

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 53

COMPACT MACHINES.

THE JCB RANGE NGE OF COMP PA ACT EQUIPMENT Whatever your application requires, JCB has the model to get the job done. The revolutionary JCB skid steer and tracked loader with side entry is the safest most productive machine on the work site. The JCB range of zero tail-swing mini excavators provide a spacious, comfortable operator ’s environment, perfect for tight spaces. Visit www w.jcbna.com .jcbna.com or the dealer nearest you to learn more!

/JCB

/JCBNA

/JCBNORTHAMERICA

Page 54 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

E55 Features ‘Finger-Tip’ Control for Boom Swing, Auxiliary Hydraulics The E55 has an operating weight of 12,478 lbs. (5,660 kg), an overall width of 77.2 in. (196 cm) and is powered by a 48.8 hp (36 kW) turbocharged diesel engine that is interim Tier IV compliant.

GO WITH KOMATSU... AND GET THE ONLY TIER 4 INTERIM EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN. Every Komatsu Tier 4 Interim construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:

• Lower your cost of ownership M • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.

SOUTHEAST KOMATSU DISTRIBUTORS

H&E Equipment Services

The E55 conventional tail swing compact excavator has an operating weight of 12,478 lbs. (5,660 kg), an overall width of 77.2 in. (196 cm) and is powered by a 48.8 hp (36 kW) turbocharged diesel engine that is interim Tier IV compliant. The unit’s 13.4 in. (34 cm) of tail overhang helps it deliver increased lift capacity and slew performance in the most demanding applications. The E55 is standard equipped with a TOPS/ROPS certified cab, including full climate control (HVAC), and a deluxe high-back cloth suspension seat with retractable seat belt. Additional amenities in the “radio ready” cab include 12V power port, adjustable armrests, lockable toolbox and a convenient beverage holder. Within the operator’s area, the E55 features convenient “finger-tip” control for boom swing and auxiliary hydraulics functions. Large travel pedals fold up to provide more floor space while flush-mounted floor mats make cleanup easier. A keyless start system that discourages theft and vandalism is available as an option. The E55 comes with an auto-idle feature which, if activated by the operator, automatically returns the engine

to idle if excavator functions are not used for a period of four seconds, saving fuel and reducing job site noise. The engine automatically returns to the preset throttle position as soon as the operator starts working again. For precise engine speed adjustments, a new easy-to-use rotary knob has been added to the controls. As with all other M-Series compact excavators, a load-sensing piston pump and closed center valve system provide precise control of the machines travel and work-group functions. The E55’s hydraulic system delivers “loaded” cycle times and a 9,442 ft.-lb. of bucket breakout force for productivity. Work-group cylinders offer end-of-stroke cushioning for smooth operation. An automatic, integrated slew brake holds loads still and steady on slopes for more accurate placement. The need for the operator to manually engage the slew brakes during transport is eliminated, making it easier to load and position the machine for transport. Like all Bobcat M-Series compact excavators, the E55 features an Xframe undercarriage that provides impressive ground clearance and read-

ily sheds debris for reduced cleanup time. Drive motor covers are inset within the motor wrap-arounds to protect them from potential damage. Integrated into the undercarriage, convenient tie down points simplify trailer loading for transport, according to the manufacturer. In addition, Bobcat’s in-track swing frame keeps the swing castings and cylinders within the width of the tracks when digging in an offset position, helping the operator dig flush against an obstacle. This feature minimizes the chance of inadvertent contact with surrounding obstacles, ultimately reducing operating costs of repair to the machine or adjacent structure. Other popular options for the E55 include “pad-ready” steel tracks, rubber street pads, a hydraulic angle blade, second auxiliary hydraulics, hydraulic clamp and hydraulic XChange attachment mounting systems for quickly switching between the 16 attachments approved for use on the machine. For more information, visit www.bobcat.com/excavators/.

www.he-equipment.com AR Little Rock 501-568-7867 800-632-0577 Springdale 479-927-1672 888-200-6343 LA Alexandria 318-443-7173 800-249-8485 Baton Rouge 225-356-6113 800-872-1305 Bossier City 318-746-5272 800-643-2844 Broussard 337-837-9600 877-463-9914 Gonzales 225-644-2328 888-450-0723 Kenner 504-467-5906 800-203-1869 Sulphur 337-528-2661 800-258-1614

Linder Industrial Machinery www.linderco.com FL Ft. Myers 239-337-1313 Jacksonville 904-786-6710 Ocala 352-629-7585 Orlando 407-849-6560 Pembroke Pines 954-433-2800 Plant City 813-754-2727 West Palm Beach 561-863-0570 NC Asheville 828-681-5172 Charlotte 704-376-7554 Greenville 252-695-6200 High Point 336-665-0110 Raleigh 919-851-2030

Wilmington W 910-254-2031 SC Columbia 803-794-6150 Greer 864-877-8962 North Charleston 843-552-0095 I

A 8

Lyle Machinery Co. www.lylemachinery.com MS Columbus 662-243-2152 Hattiesburg 601-296-7556 Jackson 601-939-4000 Magnolia 601-783-2111 Saucier 228-832-7575

Power Equipment www.powerequipco.com MS Saltillo 662-869-0283 TN Chattanooga 423-894-1870 Kingsport 423-349-6111 Knoxville 865-577-5563 LaVergne 615-213-0900 Memphis 901-346-9800

B 8

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 55

Rish Equipment Company www.rish.com MD Frostburg 301-689-2211 VA Bealton 540-439-0668 Chesapeake 757-485-2100 Chester 804-748-6411 Coeburn 276-395-6901 Opal 540-439-0668 Salem 540-380-2090 Staunton 540-887-8291 WV Beckley 304-255-4111 Bluefield 304-327-5124 Bridgeport 304-842-3511 Logan 304-752-9313 St. Albaus 304-755-3311

COMPACT EXCAVATORS From Komatsu - The Compact Experts

Tractor & Equipment Company www.tractor-equipment.com AL Alabaster 205-621-2489 Anniston 256-831-2440 Birmingham 205-591-2131 Decatur 256-355-0305 800-321-6865 Dothan 334-678-1832 Mobile 251-457-8991 800-233-7213 Montgomery 334-288-6580 800-832-9563 Shoals Area 256-383-5666 Tuscaloosa 205-752-0621 FL Panama City 850-763-4654 Pensacola 850-505-0550 GA Albany 229-435-0982 800-733-0962 Atlanta 404-366-0693 Augusta 706-798-7777 800-659-3090 Calhoun 706-879-6200 800-827-3072 Columbus 706-562-1801 877-307-6439 Hoschton 706-654-9850 888-334-9850 Kennesaw 678-354-5533 Macon 478-745-6891 Savannah 912-330-7500 800-827-1405

www.komatsuamerica.com/komatsu-care

The Komatsu PC88MR-8 takes the power and quality reputation of its larger siblings into tight places. The advanced Pilot Proportional Control (PPC) joysticks provide smooth, precise controls and five working modes enable you to take command of every project. t Three track options for any terrain: rubber, steel and roadliner t Boom offset allows digging parallel to foundations or fences t Spacious and comfortable contour cab design for true tight-tail versatility t KOMTRAX wireless equipment-monitoring system with no monthly fees

www.komatsuamerica.com www .komatsuamerica.com

Page 56 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

TOLL FREE 855-575-LUGS (5847) www.bairproducts.com email: info@bairproducts.com

SUPER HUB 2

Replacement/Rebuildable Axle Assemblies • Grease Filled, Not Oil • Used with OEM or Bair’s Alloy Wheels • Rebuildable • Idlers Have Double Stacked Bearings

NEW ON THE MARKET

TRACK INSTALLATION KIT NEW ON THE MARKET

Install Rubber Tracks Fast & Easy With Hydraulic Tools, Fits Most All CAT, ASV / TEREX Compact Loaders

• Stop Wheel Failures! • CAT 247/257 A&B, ASV/TEREX 30/50/60 Models • Forget Hubbed Wheels - Upgrade To Bolt-On Alloy Wheels • 10% Larger Axle Than OEM & 43% Larger Bearings • Grease Packed / Preload Adjustable • No Inner Sleeves, Bushings, Spacers, Seals Or O-Rings!

STOP TRACK DERAILMENTS ON COMPACT TRACK LOADERS • CAT 279C/289C/297C/299C LOADERS

• Capture The Track’s Cleats At All Four Sides

• Turn One & Two Flange Idlers Into Three Flange Idlers

• Spread The Machine’s Weight, Torque Forces Out And Over The Drive Cleats

This bracelet was a gift Amber Apodoca received from the center where she helped teens with drug and alcohol problems. She was wearing it when an underage drunk driver took her life.

DON ALLISON EQUIPMENT, INC. 233 Melville Road Arley, AL 35541 800-669-6450 205-387-1600 Fax: 205-387-1668

Photo by Michael Mazzeo

Friends Don’t Let Friends Drive Drunk.

NEW ON THE MARKET

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 57

Hauling pallets of pavers, rocks, trees, or retaining-wall block? Stick a fork on a 244J Compact Loader and the job gets done — quickly and efficiently. This tight-turning, heavylifting loader serves up best-in-class maneuverability, travel speed, breakout force, reach, and stability. Switch to a bucket to move gravel, sand, mulch, or snow. Unique stereo steering delivers a 20-percent tighter turning radius — for faster cycle times and less material spillage around the equipment yard or garden center. Customer-inspired enhancements include a spacious, sound-suppressed cab and unrestricted all-around visibility. When you’re ready to feast on more productivity, order up a John Deere 244J.

67,&. $ )25. 21 21( <28Ť5( '21( coMPANy flINT EQUIPMENT Aynor, SC Brunswick, GA Albany, GA 229/888-1212 912/264-6161 843/358-5688

Atlanta, GA 404/691-9445 Grovetown, GA 706/855-5440 Columbus, GA 706/687-3344 Braselton, GA 770/965-1889 Macon, GA 478/788-1586 Adairsville, GA 770/773-9857

Savannah, GA 912/964-7370 Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Perry, FL 850/584-9200 Tallahassee, FL 850/575-5600

West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Ladson, SC 843/572-0400 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420

R.W. MooRE EQUIP. co. Main office Garner, NC 919/772-2121

Ahoskie, NC

252/332-5550 Hope Mills, NC 910/424-1200 New Bern, NC 252/638-5838 Greenville, NC 252/758-4403 Castle Hayne, NC 910/675-9211

JAMES RIVER EQUIPMENT Ashland, VA 804/798-6001 Manassas Park, VA 703/631-8500 Winchester, VA 540/667-9777 Richlands, VA 276/596-9440 NC Asheville, 828/667-0176

Charlotte, NC 704/597-0211 800/532-6797 Greensboro, NC 336/668-2762 800/632-0376 Mt. Gilead, NC 910/439-5653 800/692-9175 Salem, VA 540/380-2011

coASTAl EQUIPMENT coRP. Main office 504 South Military Hwy. Virginia Beach, VA 23464 757/424-1900 Yorktown, VA 757/898-1900

Page 58 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Case Adds Larger Engines, Tier IV Upgrades to Alpha Skid Steer Models Case Construction Equipment recently upgraded its largest Alpha Series skid steers and compact track loaders, which now meet emission requirements for Tier IV Interim certification. The Case SR250 and SV300 skid steers and TR320 and TV380 compact track loaders now feature 90 hp (67 kW), 3.4 L Case diesel engines with the full high-pressure common rail (HPCR) design typically used in larger construction equipment. To meet Tier IV Interim emission requirements, Case equipped the models with cooled exhaust gas recirculation (CEGR) technology, including diesel particulate filter and diesel oxidizing catalyst. Case selected CEGR technology as most appropriate for skid steers and compact track loader applications, where the engine typically runs at a high RPM. Rated operating capacities are 2,500 lb. (1,135 kg) for the SR250; 3,000 lb. (1,361 kg) for the SV300; 3,200 lb. (1,451 kg) in the TR320, and 3,800 lb. (1,723 kg) for the TV380. The Case 3.4 L engine in the upgraded Alpha Series skid steers and compact track loaders features a new piston design — specifically engineered for use in high pressure common rail (HPCR) fuel systems — that promotes thorough combustion, optimizes power and fuel efficiency. The electronic engine controls monitor EGR sensors and other inputs to determine diesel particulate filter (DPF) system regeneration needs. Dozer-Style Undercarriage As in previous Case models, the upgraded Case TR320 and TV380 compact track loaders feature a dozerstyle undercarriage, engineered to hold fast on steep slopes and take command of muddy or sandy terrain. The undercarriage has a rigid track frame with fewer moving parts, so it is more durable and easier to maintain than suspension track systems, according to the manufacturer. For more information, visit www.casece.com.

DITCH WITCH OF TENNESSEE www.ditchwitchtn.com Nashville 140 Charter Place LaVergne, TN 37027 615-793-7576 800-449-4814 Knoxville Louisvile, TN 37777 865-970-2840 800-445-4814

GROWERS EQUIPMENT CO. www.growersequipment.com 2695 Davie Rd. Davie, FL 33314 954-916-1020 Miami (Doral), FL (parts only) 305-592-7892

The upgraded Case TR320 and TV380 compact track loaders feature a dozer-style undercarriage, engineered to hold fast on steep slopes and take command of muddy or sandy terrain.

TRACTOR & EQUIPMENT CO. www.tractornequipment.com 2006 Northwest Blvd. Newton, NC 28658 828-695-1025

CHARLOTTE TRACTOR www.charlottetractor.com 1700 Starita Rd. Charlotte, NC 28206 704-596-8900 800-532-1011

GREENSBORO TRACTOR www.greensborotractor.com 2820 S. Elm-Eugene Street Greensboro, NC 27406 336-273-3606

The Case SR250 and SV300 skid steers and TR320 and TV380 compact track loaders now feature 90 hp (67 kW), 3.4 L Case diesel engines with the full high-pressure common rail (HPCR) design typically used in larger construction equipment.

EVERYTHING YOU VALUE

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 59

BALDWIN TRACTOR & EQUIPMENT www.baldwintractor.com 22463 State Highway 59S Robertsdale, AL 36567 251-947-4171

Now available with a pressurized comfort cab. Schedule your Kubota SVL Series demo today.

JONESBORO TRACTOR SALES INC. 5312 Stadium Blvd. Jonesboro, AR 72402 888-931-9151 870-935-9151

MASON TRACTOR CO. www.masontractorco.com 1050 Appalachian Hwy Blue Ridge, GA 30513 706-632-3777 McDonough, GA 30253 770-957-3370 Cumming, GA 30040 770-887-6119

TYLER EQUIPMENT CO., INC. 2613 Main St. Conway, SC 29516 843-248-5294

BROOKS SALES INC. www.brookssales.com 3144 Highway 74 East Monroe, NC 28112 704-233-4242

FUTCH’S TRACTOR DEPOT www.futchstractordepot.com 8515 S.R. 207 North Hastings, FL 32145 904-692-3673 Fax: 904-692-2842

STEVENSON TRACTOR, INC. www.stevensontractor.com 1792 S. Military Hwy. Chesapeake, VA 23320 757-420-4220

www.kubota.com

Optional equipment may be shown. ©Kubota Tractor Corporation, 2010

COASTAL EQUIPMENT SYSTEMS www.coastalequipment systems.com 5287 New Kings Road Jacksonville, FL 32209 904-924-9624

CREEL TRACTOR CO. www.creeltractor.com 3771 Palm Beach Blvd. Fort Myers, FL 33916 239-694-2185 Fax: 239-694-6059

Page 60 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Vermeer Southeast Sales & Service, Inc. Boynton Beach, FL 1060 West Industrial Avenue Boynton Beach, FL 33462 561-742-7400 • Fax: 561-742-7448 Clearwater, FL 12785 N 44th St. Clearwater, FL 33762 727-299-9207 • Fax: 727-299-0166 Ft. Myers, FL 2231 Flint Dr. Ft. Myers, FL 33916 941-337-5900 • Fax: 941-337-5901 Jacksonville, FL 11550 Philips Hwy. Jacksonville, FL 32256 904-262-4400 • Fax: 904-262-0619 Orlando, FL 4559 Old Winter Garden Rd. Orlando, FL 32811 407-295-2020 • Fax: 407-293-8087 Miami, FL 13301 S.W. 131st Str. Miami, FL 33186-5816 305-234-4556 • Fax: 305-234-5561 Pensacola, FL 6691 Mobile Highway Pensacola, FL 32526 850-944-8110 • Fax: 850-944-8166 Tallahassee, FL 31767 Blue Star Hwy Midway, FL 32343 850-575-1556 • Fax: 850-575-5718 Marietta, GA 1320 Gresham Rd. Marietta, GA 30062 770-973-8811 • Fax: 770-973-7829 Savannah, GA 411B Telfair Rd. Savannah, GA 31415 912-238-1300 • Fax: 912-238-1003 Birmingham, AL 2950 Pinson Valley Parkway Birmingham, AL 35217 205-841-9895 • Fax: 205-841-9841 Decatur, AL 314 Beltline Rd Decatur, AL 35601 256-341-0700 • Fax: 256-341-0773

Vermeer Puerto Rico

Vermeer of Texas-Louisiana

Ave. Cementerio Nacional Local #49, Hato Tejas Bayamon, Puerto Rico 00961 787-780-0533 • Fax: 787-780-1501

8272 Rushing Road Denham Springs, LA 70726 225-665-7900 • Fax: 225-665-7979

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 61

Cowin Equipment Company, Inc. 2238 Pinson Valley Pkwy P.O. Box 10624 Birmingham, AL 35202 205.841.6666 35 Schillinger Road, N P.O. Drawer 29 Mobile, AL 36601 251.633.4020

3120 Old Hayneville Rd. P.O. Drawer 9367 Montgomery, AL 36108 334.262.6642 15101 Alabama Hwy 20 Madison, AL 35758 P.O. Box 6192 Huntsville, AL 35824 256.536.9390 www.cowin.com

1501 Highway 78 East Oxford, AL 36203 256.832.5053 7950 Pittman Ave. Pensacola, FL 32591 850.479.3004

ACT Construction

Cobb County Tractor

Perimeter Takeuchi

355 Business Park Drive Winston-Salem, NC 27107 800.849.5438 3001 Boundary St. Wilmington, NC 28405 800.849.5438 www.actforklift.com

1520 Cobb Parkway N. Marietta, GA 30062 770.427.1348 www.cctractor.com

3022 Peachtree Industrial Blvd. Buford, GA 30518 770.614.5730

Page 62 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Topcon GPS-Equipped Iron Gets Workout From Attendees SKEET from page 12

James Cummings, Waste Industries, Apex, N.C., liked the efficiency of the John Deere 700K LGP dozer equipped with a Topcon device. About to take the first shots for the day are (LR) Mike Cooney, Triton Sitework Development LLC, Raleigh, N.C.; Brian Metcalf, RW Moore; Mike Johnson, Triton Sitework Development LLC; Craig McBeth, John Deere; host Dan Moore; and Scott Knox, John Deere.

This John Deere 764 dozer equipped with Topcon 3D MC² was tested out by a steady stream of operators.

Chuck Harris (L), Benchmark Tool & Supply’s event host, thanks Steve Harris, The Fred Smith Companies, for his business.

Josh Kearns (L) and Mike Gaillard, both of Benchmark Tool & Supply, talk about the increased operator efficiency when a Topcon LS-B100 laser receiver is placed on an excavator.

(L-R): Scott Knox and Craig McBeth, both of John Deere; and Drew Bouche and Steve Surrett, both of Lane Construction, Raleigh, N.C., all enjoyed the day out of the office shooting.

(L-R): Terry and Kathy Parker, TAP Construction, Four Oaks, N.C., are welcomed to the annual clay shooting event by Dan Moore. see SKEET page 93

Paving

SECTION Dynapac Unveils 5th Generation of Single Drum Rollers Pages 63-75

Dynapac USA has introduced four models of its CA-series single drum vibratory rollers. The CA5000, CA5500, CA6000 and CA6500 have been equipped with a number of enhancements over previous models, including optimized drum amplitude, automatic bouncing control and an overall design that makes it easier to service the equipment, according to the manufacturer. Compaction is delivered by the new models utilizing drum amplitude of .083 in. (.2 cm.) This increased force allows rock fill to be compacted in layers almost 9 ft. (2.7 m) thick with rock sizes up to 3 ft. (.9 m) in diameter. It also requires fewer passes to reach compaction specifications.

Dynapac’s new CA6000 single-drum vibratory roller.

Automatic bouncing control measures feedback from the drum and eliminates drum bouncing or over compacting. This feature improves compaction performance while extending the useful life of the equipment by eliminating drum double-jump, which could lead to premature failure of machine components, according to the manufacturer. The CA6000D

model also features a governor to avoid compacting at too high a speed. A full package of design features enhances the serviceability of all models. The cross-mounted engine not only offers easy access for service and maintenance, it also provides enhanced weight distribution and reduces overall machine length. The hydraulic pumps, arranged in line with the engine, are easily accessed for servicing. Another key feature is the “ECO mode” fuel conservation system that minimizes fuel consumption as well as carbon dioxide emissions by ensuring that the roller does not consume more power than needed at any given time. The models also give attention to enhanced safety features with electronic drive control, which provides a “quick brake” function and a tilt indicator. Dynapac’s anti-spin traction system ensures consistent on-the-go traction and gradeability. The combustion air intake is placed on the engine hood with the

outlet running down the sides, thereby keeping the inlet air as clean as possible. When combined with the ejector exhaust outlet, this placement also serves to minimize noise levels. The CA rollers have static linear loads of 280 pounds per linear inch (pli) on the CA5000, 310 pli on the CA5500, 335 pli on the CA6000 and 365 pli on the CA6500. All four models are equipped with interim Tier IV engines from Deutz, and can use a mix of biodiesel and regular diesel fuel. Optional features on the new rollers include: • Service interval alert on instrument panel indicates when a particular service is required • Sustainability package: an rpm management system, biodegradable fill-for-life hydraulic fluid, 50 hours service kit, electrical engine block heater and working lights with LED lamps (CA6000D only.) • Air-conditioned cabs with spin-around seat and steering module, offering movement of up to 180 degrees without stressing neck or body. Spin-around seats also are available as a standalone option, without the cab. • Productivity software, including Dynapac CompBase, providing task planning, execution and analysis, and CostCtrl web-based software for lifecycle cost control and increased machine availability. The CA rollers are available in standard models with a choice of specifications and available options allowing customers to “build” their own machines, or choose from a number of pre-defined packages. For more information, visit www.dynapac.us.

Page 64 â&#x20AC;˘ October 3, 2012 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ Paving Section â&#x20AC;˘ Construction Equipment Guide

Dynapacâ&#x20AC;&#x2122;s CC 624F 7KH XOWLPDWH LQ YLVLELOLW\ IXHO HIÂżFLHQF\ and compaction performance... Dynapacâ&#x20AC;&#x2122;s CC624HF double-drum, high frequency vibratory asphalt rollers offer complete compaction control including mat temperature, speed, blows per foot, and other exceptional features. Designed to meet the needs of road contractors â&#x20AC;&#x201C; HIÂżFLHQWO\ FRPSDFWLQJ DQ\ W\SH RI DVSKDOW PL[

Dynapac â&#x20AC;&#x201C; Providing Dynamic Compaction Solutions for over 70 years.

Authorized Dynapac Dealers Doggett Construction & Forestry Equipment www.doggettgroup.com St. Rose, LA 504.466.5577

Covington, LA 985.893.3005 Baton Rouge, LA 225.291.3750 Sulphur, LA 337.626.8503 Alexandria, LA 318.442.0455 Monroe, LA 318.343.8787 Shreveport, LA 318.631.3090

Flint Equipment ZZZ Ă&#x20AC;LQWSRZHU FRP

James River Equipment ZZZ MDPHVULYHUHTXLSPHQW FRP

Tractor & Equip. Co. ZZZ WUDFWRU HTXLSPHQW FRP

Trekker Tractor, LLC www.www.trekkertractor.com

Albany, GA 229.888.1212

Charlotte, NC 704.597.0211

Tuscaloosa, AL 205.752.0621

West Palm Beach, FL 561.296.9710

Perry, FL 850.584.9200

Greensboro, NC 336.668.2762

Panama City, FL 850.763.4654

Miami, FL 877.971.7070

Tallahassee, FL 850.575.5600

Asheville, NC 828.667.0176

Pensacola, FL 850.505.0550

Tampa, FL 813.341.4646

Alabaster, AL 205.621.2489

Bonita Springs, FL 239.949.0100

Aynor, SC 843.358.5688 Simpsonville, SC 864.963.5835 W. Columbia, SC 803.794.9340

Adairsville, GA 770.773.9857 Atlanta, GA 404.691.9445 Grovetown, GA 706.855.5440

Braselton, GA 770.965.1889 Columbus, GA 706.687.3344 Macon, GA 478.788.1586

Dynapac USA 3700 East 68th Avenue Commerce City, CO 80022

Phone: 800-732-6762 Fax: 303-288-8828 www.dynapac.us

Rish Equipment Co. ZZZ ULVK FRP Chesapeake, VA 757.485.2100

Chester, VA 804.748.6411 Coeburn, VA 276.395.6901

Bealeton, VA 540.439.0668 Salem, VA 540.380.2090

Staunton, VA 540.887.8291

Anniston, AL 256.831.2440

Birmingham, AL 205.591.2131 Decatur, AL 256.355.0305

Dothan, AL 334.678.1832 Grove Hill, AL 334.275.4158 Mobile, AL 251.457.8991

Montgomery, AL 334.288.6580 Shoals Area, AL 256.383.5666

Atlas Copco Construction & Mining www.atlascopco.us Pompano Beach, FL 855.DYNAPAC www.atlascopco.us/miami LaVergne, TN 615.641.3000 www.atlascopco.us/nashville Knoxville, TN 865.673.0344 www.atlascopco.us/knoxville

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 65

The Worldwide Leader in Concrete Paving Technology

info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ THE WORLDWIDE LEADER IN CONCRETE PAVING TECHNOLOGY ❘ 800-831-2320

FLAGLER CONSTRUCTION EQUIPMENT, LLC www.flaglerce.com 5210 Reese Road Davie, FL, 33314 954-581-4744 954-583-0318 (Fax) 5151 Dr. Martin Luther King, Jr. Blvd. Ft. Myers, FL 33905 239-481-8554 239-481-3302 (Fax)

COWIN EQUIPMENT CO. Birmingham, AL 2238 Pinson Valley Parkway Birmingham, AL 35217 205-841-6666 205-849-0853 (Fax)

Montgomery, AL 3120 Old Hayneville Road Montgomery, AL 36108 334-262-6642 334-834-2272 (Fax)

Oxford, AL 1501 Highway 78 East Oxford, AL 36203 256-832-5053 256-831-4295 (Fax)

Mobile, AL 23 Schillinger Road North Mobile, AL 36608 251-633-4020 251-633-9157 (Fax)

Huntsville, AL 15101 Alabama Highway 20 Madison, AL 35756 256-350-0006 256-355-5250 (Fax)

Pensacola, FL 7950 Pittman Avenue Pensacola, FL 32534 850-479-3004 850-474-1602 (Fax)

TRACTOR & EQUIPMENT COMPANY www.tractor-equipment.com 5732 Frontage Road 1502 Box Road 1815 West Oakridge Drive Forest Park, Georgia 30297 Columbus, Georgia 31907 Albany, Georgia 31707 404-366-0693 706-562-1801 229-435-0982 404-366-9688 (Fax) 706-562-9897 (Fax) 229-435-5259 (Fax) 160 Robinson Road NW Calhoun, Georgia 30701 706-879-6200 2314 Highway 53 Hoschton, Georgia 30548 706-654-9850 706-654-9856 (Fax)

2727 Gray Highway Macon, Georgia 31211 478-745-6891 478-745-7291 (Fax)

1200 Highway 80 East Pooler, Georgia 31322 912-330-7500 912-330-7490 (Fax)

3809 Mike Padgett Highway Augusta, Georgia 30906 706-798-7777 706-798-3237 (Fax)

1355 Big Shanty Road Kennesaw, Georgia 30144 678-354-5533 678-354-5577 (Fax)

STOWERS MACHINERY CORPORATION www.stowerscat.com Knoxville Headquarters 865-546-1414 Knoxville West 865-218-8800 Chattanooga 423-698-6943 Kingsport 423-323-0400 Crossville 931-484-4040

Page 66 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

3517 Wayne White Rd., Climax, NC 27233

866-430-7539

jfwequip@aol.com www.jfwequipment.com

1989 Blaw Knox PF200 Paver, Omni III screed 10-18 ft, Cummins diesel engine

2003 Sweepster HBC74MNH broom attachment, Big Dawg - bucket broom sweeper attachment, 6 1/2 ft wide

1998 Etnyre 9-18 ft extendable chip spreader, 4 wheel drive, computerized, hydrostatic drive, Cummins dsl eng

2009 Marathon KERA145HD Crack Sealer, rubberized melting kettle for crack sealing and waterproofing, 145 gallon, Diesel engine, diesel heat, heated hose and hand wand, 80cfm air compressor

2002 Ingersoll Rand DD24 Roller, double drum 47” vibratory roller, Kubota diesel engine, OROPS, water system, scrapers

2005 Caterpillar AS2301 Screed, Caterpillar Screed low hour take off, 10 - 18 1/2 feet, diesel heat, power crown & slope

2003 Hypac C530AH Roller, 9 wheel rubber tire roller, Cummins 3.3L diesel engine, co-co mats, water system, canopy

1975 Blaw Knox RW 195 Road Widener, 4 wheel drive, 14ft widening, 2-3ft hyd. Ext.

2012 Cam Superline 6CAM16FTT Trailer, 6 ton full tilt trailer, 18 ft long, reverse angle beavertail, 8 D ring tie downs, 102” wide, 81” useable width, colorblack, GVWR 13,800 lbs, empty weight 2880 lbs, payload 10,920 lbs

Serving Serving the the Asphalt Asphalt Industry Industry for for 25 25 Years Years

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 67

www.tractor-equipment.com RICHMOND MACHINERY & EQUIPMENT CO., INC. 1701 Roseneath Rd. Richmond, VA 23230 1-800-662-6485

FLORIDA Pensacola, FL 850-505-0550 Panama City, FL 850-763-4654

ALABAMA 5336 Messer Airport Hwy. Birmingham, AL 35212 205-591-2131 Fax: 205-591-8321

Grove Hill, AL 251-275-4158 Tuscumbia, AL 256-383-5666 Dothan, AL 334-678-1832

Mobile, AL 251-457-8991 Decatur, AL 256-355-0305 Alabaster, AL 205-621-2489

Tuscaloosa, A 205-752-0621 Montgomery, AL 334-288-6580 Oxford, AL 256-831-2440

www.reynoldswarren.com 1945 Forest Parkway Lake City, GA 30260 800-875-5659 • 404-361-1593 Fax: 404-361-1885

Page 68 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Volvo PF6160, PF6170 Wheel-Mounted Pavers Designed for Productivity

POWER EQUIPMENT COMPANY

REYNOLDS-WARREN COMPANY INC

3300 Alcoa Highway Knoxville, TN 37920 (865) 577-5563

1945 Forest Parkway Lake City, GA 30260 (800) 875-5659 (404) 361-1593

1487 Rock Springs Road Kingsport, TN 37664 (423) 349-6111 Highway 58 @153 Chattanooga, TN 37406 (423) 894-1870 1290 Bridgestone Pkwy LaVergne, TN 37086 (615) 213-0900 3050 Ferrell Park Cove Memphis, TN 38116-3502 (901) 346-9800 1545 Highway 45 Saltillo, MS 38866 (662) 869-0283

RISH EQUIPMENT COMPANY www.rish.com 917 Cavalier Blvd. Chesapeake, VA 23323 (757) 485-2100 (757) 485-3616

The PF6160 and PF6170 feature dual control stations, which can pivot at two points for comfort, and each seat may be extended beyond the edge of the machine for improved visibility.

The Volvo PF6160 and PF6170 wheel-mounted pavers are part of the PF6000-Series highway-class asphalt paver line that utilizes global technology to provide solutions that increase paving performance and provides maximum uptime for the machine, according to the manaufacturer. Both the PF6160 and PF6170 are powered by a 205-hp (153 kW) Tier III-certified Cummins engine. A level-load suspension design uses the two drive wheels and the center of the bogie hydraulic system. This provides consistent and even ground contact for stability. Both the PF6160 and the PF6170 come standard with the two-wheel front-wheel assist; however, the PF6170 can be configured with an optional four-wheel front-wheel assist for all-wheel-drive capability. The torque is adjusted based on the hopper load, optimizing the machine’s traction.

A hopper capacity of 14.38 tons (13.04 t) gives each paver a practical production rate of 820 tons (744 t) per hour. Standard on all PF6000-Series pavers are hopper locks that keep hopper wings secure during transport.

Material Management A number of features on these pavers provide contractors with more options in material flow. The auger system is independent of the conveyor system with each of the two auger and conveyor drives using sonic sensors for more precise handling of material. The conveyor system has chains that are automatically tensioned for proper performance and less downtime. The conveyor chain cover cleans itself, providing easier maintenance. Reversible augers and conveyors are optional equipment.

Your Choice of Screed The Volvo PF6160 and PF6170 can fit the Omni 318, Omni 1000 or Ultimat 200 screeds, allowing the flexibility to build a paver to fit the needs of the application. Both pavers have a screed width of 10 ft. (3 m) and a maximum paving width of 26 ft. (8 m). PF6000-Series pavers have a 30-kilowatt generator providing plenty of power to the screeds. For more information, call 828/650-2000 or visit www.volvo.com.

Operator Controls The PF6160 and PF6170 feature dual control stations, which can pivot at two points for comfort, and each seat may be extended beyond the edge of the machine for improved visibility. An open deck space improves mobility for the operator and increases visibility, and secure handrails provide added safety. The operator panel keeps all controls, gauges and warning lights at the fingertips of the operator, with the ability for the panel to tilt or swivel to fit the comfort of the operator.

1410 West Hundred Rd. Chester, VA 23836 (804) 748-6411 133 Wise Mountain Rd. NW Coeburn, VA 24230 (276) 395-6901 Fax: (276) 395-3438 10214 Fayetteville Rd. Bealton, VA 22712 (540) 439-0668 Fax: (540) 439-0719 5731 Glenmary Drive Salem, VA 24153 (540) 380-4858 66 International lane Suite 102 Staunton, VA 24401 (540) 887-8291 Fax: (540) 887-8295

TRACTOR & EQUIPMENT COMPANY 5336 Messer-Airport Hwy Birmingham, AL (205) 591-2131 3820 Greensboro Ave. Tuscaloosa, AL (205) 752-0621 2100 East I-65 Service Rd. North Mobile, AL (251) 457-8991 800 Church St. N.E. Decatur, AL (256) 355-0305 3285 Selma Highway Montgomery, AL (334) 288-6580 243 South Jackson St. Grove Hill, AL (251) 275-4158 961 Hwy 20 & Elledge Lane Tuscumbia, AL (256) 383-5666 4307 Reeves Street Highway 431 North Dothan, AL (334) 678-1832 309 Hamric Drive West Oxford, AL (256) 831-2440 150 Piper Lane Alabaster, AL (205) 621-2489 3305 Highway 77 Panama City, FL (850) 763-4654 9036 Pine Forest Rd. Pensacola, FL (850) 505-0550

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 69

Page 70 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

POWER AND PRODUCTIVITY. Get More Done With Versatile Terex® Compact Equipment You need a machine that offers the right combination of power and productivity. And that’s what you get with Terex® equipment. We offer over 60 unique models within our construction product line. Our skid steer loaders, excavators, wheel Loaders, backhoes and compact track loaders provide the traction, maneuverability, reach and clearance you need to take control of demanding repetitive workloads.

Lashley Tractor Sales

6953 Covington Highway Lithonia, GA 30058 Fax: 770-808-0735 www.lashleytractorsales.net

770-808-5500 866-458-1207

GIVE. ADVOCATE. VOLUNTEER.

LIVE UNITED

™

Want to make a difference? Find out how at LIVEUNITED.ORG.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 71

JAMES RIVER EQUIPMENT

WHILE SOME PEOPLE ARE HAVING A PROBLEM GRASPING THE CONCEPT, THEY’RE SURE NOT HAVING ANY DIFFICULTY GRABBING THE RESULTS. It’s a rubber tire roller that vibrates with enough centrifugal force to equal the output of a 55,000 pound pneumatic. The GW750 handles the toughest HMA mixes with ease, getting balanced high densities from the top through the bottom of the mat. Great on SMA, too! And it provides a sound interlock between new overlays and profiled surfaces. It’s bonus time! www.sakaiamerica.com 1-800-323-0535

Check one out at your Sakai dealer today.

Reynolds-Warren Equipment Company www.reynoldswarren.com 1945 Forest Parkway Lake City, GA 30260 800/875-5659 • 404/361-1593

Ashland, VA 23005 804/798-6001 Burkeville, VA 23922 434/767-5578 Chester, VA 23831 804/748-9324 Fishersville, VA 22939 540/337-3057 Fredericksburg, VA 22408 540/373-2778 Salem, VA 24153 540/380-2011 Manassas Park VA 20111 703/631-8500 South Hill, VA 434/447-1325 Danville VA 24540 434/822-6110 Richmond VA 23220 840/358-6776 Winchester, VA 22602 540/667-9777 Asheville, NC 28806 828/667-0176 Charlotte, NC 28269 704/597-0211 800/532-6797 Greensboro, NC 27409 336/668-2762 800/632-0376 Wilkesboro, NC 28697 336/973-8201 800/422-4193 Mt. Gilead, NC 27306 910/439-5653 800/692-9175 Asheboro, NC 27203 336/625-2212 Salisbury, NC 28144 704/636-2571 Matthews NC, 28104 704/821-7399 Rock Hill SC 29730 803/325-1555 866/277-8119

Page 72 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

INCREASE YOUR BONUS POTENTIAL. LET’S WORK. You need a partner you can rely on. Volvo Construction Equipment builds high-quality road building equipment backed by knowledgeable industry experts. We understand that reliability and performance help you meet strict specifications, keeping you profitable and helping earn your bonus. Our graders, milling machines, pavers and compactors are engineered to do just that – keep you productive and give you the best shot at increasing your earning potential. Learn how to increase your productivity by contacting a Volvo dealer near you. Visit volvoce.com/na today. COWIN EQUIPMENT CO. INC. Birmingham, AL 205-841-6666 Mobile, AL 251-633-4020 Montgomery, AL 334-262-6642

Huntsville / Decatur, AL 256-350-0006 Oxford, AL 800-917-7931 Pensacola, FL 850-479-3004

RICHMOND MACHINERY & EQUIPMENT Richmond, VA 804-359-4048 800-662-6485

Volvo Construction Equipment

FLAGLER CONSTRUCTION EQUIPMENT, LLC.

Orlando, FL (Corporate Office) 407-659-8700 Orlando, FL 407-850-9614 Jacksonville, FL 904-737-6000

Ft. Myers, FL 239-481-8554 Davie, FL 954-581-4744 Tampa, FL 813-630-0077

ASC CONSTRUCTION EQUIPMENT NORTH CAROLINA Asheville, NC 828-687-0620 Charlotte, NC 704-596-8283 Raleigh, NC 919-661-8710 Greenville, NC 252-754-5280

ASC CONSTRUCTION EQUIPMENT SOUTH CAROLINA Columbia, SC 803-791-0740 Piedmont, SC 864-704-1060 North Charleston, SC 843-414-1120

ASC CONSTRUCTION EQUIPMENT GEORGIA Buford, GA 678-318-9500 Savannah, GA 912-964-8079 Forest Park, GA 770-319-0074

ASC CONSTRUCTION EQUIPMENT TENNESSEE Chattanooga, TN 423-308-7940 Knoxville, TN 865-525-1845

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 73

NORTRAX SARASOTA PARTS Sarasota, FL 34243 941-752-1300

WEST PALM BEACH West Palm Beach, FL 33404 561-848-6618

POMPANO BEACH PARTS Pompano Beach, FL 33064 954-977-9541

TAMPA PARTS Riverview, FL 33569 813-621-4902

ORLANDO Orlando, FL 32804 407-299-1212

MELBOURNE PARTS West Melbourne, FL 32904 321-729-8944

MIAMI Miami, FL 33166 305-592-5740

FORT MYERS Ft. Myers, FL 33916 239-334-3627

NEW TAMPA Lutz, FL 33559 813-995-0841

Page 74 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

THE NEW DYNAMIC EFFICIENCY W 210i WITH MORE THAN 60 NEW INNOVATIVE FEATURES More power with less fuel technology: PTS – Parallel to Surface WIDRIVE – New control solutions ISC – Intelligent speed control LEVEL PRO – Designed for the crew 3DS – Flexible application drum speed VCS – Environmentally friendly

W 210i Operating

Engine: Milling widths:

716 HP 6’ 7”; optional: combo and 7’ 3” Milling depth: 13” Operating weight, CE: 63,670 lbs

Max Dig

ROAD AND MINERAL TECHNOLOGIES

www.wirtgenamerica.com find us on www.facebook.com/linderindustrialmachinery

Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283

North Carolina Asheville • 828/681-5172 Charlotte • 704/376-7554 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031

South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 North Charleston • 843/552-0095

Ashland, VA • 804/798-6001 Fishersville, VA • 540/337-3057 Richlands, VA • 276/596-9440 Salem, VA • 540/380-2011 Winchester, VA • 540/667-9777 www.JamesRiverEquipment.com

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 75

Mauldin’s 1750-C Super Paver is ready for fast and hard action. Unmatched performance and durability set this heavyweight apart from all others.

M413XT

Check the details at www.4aMauldin.com. MG622

Precision Spray

Discover More Ways Mauldin Can Help You Become a Master

of the Mat.

Calder Brothers Corporation 250 E. Warehouse Ct. | Taylors, SC 29687

phone: (864) 244-4800 | fax: (864) 244-5007 | www.4aMauldin.com STOWERS MACHINERY CORP. www.stowerscat.com Knoxville Headquarters (865) 546-1414 Knoxville West (865) 218-8800 Chattanooga (423) 698-6943 Kingsport (423) 323-0400 Crossville (931) 484-4040

RICHMOND EQUIPMENT & MACHINERY CO., INC. www.richmond machinery.com 1701 Roseneath Rd Richmond, VA 23230 (804) 359-4048 (800) 662-6485

THOMPSON TRACTOR

YANCEY BROS. CO.

www.thompsontractor.com

www.yanceybros.com

Attalla-Gadsden, AL (866) 811-7609 Birmingham, AL (800) 547-0760 Crestview, FL (850) 682-6510 Decatur-Huntsville, AL (800) 435-0922 Dothan, AL (334) 671-1040 Huntsville, AL (256) 532-1776 Marianna, FL (850) 526-2241 Mobile, AL (800) 243-0665 Montgomery, AL (800) 521-9511

Opelika-Auburn, AL (334) 749-3359 Oxford-Anniston, AL (800) 547-8897 Panama City, FL (850) 785-4007 Pensacola, FL (850) 471-6700 Shelby County, AL (205) 664-4833 Thomasville, AL (334) 636-0420 Tuscaloosa, AL (205) 247-2800 Tuscumbia, AL (256) 381-2771

Albany (800) 768-2892 Augusta (800) 446-5131 Austell (800) 282-1562 Bloomingdale (800) 482-1144 Brunswick (800) 299-5010 Calhoun (800) 752-9804 Columbus (800) 633-5240 Dacula (800) 545-2945

Kennesaw (866) 289-2228 Macon (800) 633-5180 Savannah (800) 755-8382 Statesboro (888) 764-6506 Valdosta (800) 755-6841 Washington (888) 678-3211 Waycross (888) 948-2443

KELLY TRACTOR CO. 8255 NW 58th St. Miami, FL (305) 592-5360 Clewiston, FL (863) 983-8177 Ft.Myers, FL (239) 693-6563 West Palm Beach, FL (561) 683-2015 Davie, FL (954) 581-8181

LOUISIANA CAT info@Louisianacat.com www.Louisianacat.com P.O. Box 356 Reserve, LA 70084 (985) 536-1121 (866) 843-7440 Alexandria, LA (318) 443-2577 Bossier City, LA (318) 746-2341 Hammond, LA (985) 340-2820 Lake Charles, LA (337) 439-3601 Lafayette, LA (337) 837-2476 Monroe, LA (318) 323-1345 Prairieville, LA (225) 673-3480 Mansfield, LA (318) 872-9700

Page 76 • October 3, 2012 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

Doosan DX140W Wheel Excavator Features More Power, Performance

The DX140W is powered by a 135-hp (100.6 kW), 6-cylinder DL06KB water-cooled diesel engine that has been optimized for use with cooled exhaust gas recirculation (CEGR) system, diesel oxidation catalyst (DOC) and diesel particulate filter (DPF).

The Doosan DX140W wheel excavator combines increased power and performance with interim Tier 4 (iTIV) updates. New technologies make this excavator ideal for highway and street development, commercial construction, bridge and railway development and dealer rental, according to the manufacturer. The DX140W is powered by a 135-hp (100.6 kW), 6cylinder DL06KB water-cooled diesel engine that has been optimized for use with cooled exhaust gas recirculation (CEGR) system, diesel oxidation catalyst (DOC) and diesel particulate filter (DPF). The engines in this configuration are optimized to reduce nitrogen oxide (NOX) and after-treatment is needed to reduce particulate matter, to comply with iT4 emission regulations. The turbocharged 359-cu.-in. engine features a high pressure common rail design with direct fuel injection, electronic control and four valves per cylinder. Performance The electronic power optimizing system (EPOS) provides optimum power and fuel efficiency via four work modes, auto-idle and machine diagnostics. Operators can work more effectively with multiple operating modes, easy-to-read display monitors and precise control levers. The new power plus mode provides improved performance and faster workgroup speeds for heavy duty work. Four work modes — digging, breaker, shear and the new lifting mode — allow operators to get maximum efficiency and fuel economy in specific applications. A new electronic fan clutch reduces fuel consumption and noise levels, while providing cooling system improvements. Outriggers can be controlled individually to level the machine on uneven surfaces. The front axle oscillates and provides excellent steering angles for maneuverability, but can be locked for better digger and lifting performance. Options The DX140W features a new intelligent floating boom

option that allows the boom of the excavator to “float” up or down, allowing the operator to focus more on the task while decreasing the machine workload and increasing efficiency. Intelligent floating boom mode allows the boom to move freely up and down without hydraulic flow; and in breaker mode the boom is allowed to move freely down, only without hydraulic flow. A temporary reset button allows the ability to momentarily disengage the float, allowing hydraulic flow to activate the boom. Also offered is an air compressor, which is ideal for operators in remote and dusty locations to blow out the cab or filters. Comfort Doosan continues to focus on operator comfort with further enhancements to the roll-over protective structure (ROPS) cabin. Both a seat height lever and tilting function for the seat cushion were added to the seat to allow the operator to find an optimum seating position. The cabin mounting mechanism has been improved with a thickened dampening plate, and an internal coil spring has been added to reduce cabin vibration 20 percent, allowing operators to work longer days with less fatigue. The door window position slider now locks in various positions, preventing it from moving from its intended location. The door space of the cab has increased by 1.8 in., allowing the operator to get in and out more easily. The cabin size has increased 6.1 percent, providing more headroom. The joystick angle has been reduced from 25 degrees to 19 degrees to provide a more ergonomic profile and decrease interference with operators’ legs. The Doosan DX140W — like every new Doosan machine — is covered by a 48 hour parts guarantee. The program guarantees that if a “machine-debilitating” part is needed, Doosan will deliver it directly to the end user within two business days or Doosan will pay for a replacement machine rental. The 48 hour parts guarantee is subject to carrier delivery restrictions and/or governmental agency delays. For more information, visit www.doosanequipment.com.

Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • October 3, 2012 • Page 77

Tier IVi Compliant…

Doosan Portable Power Offers Four New Mobile Generators Doosan Portable Power now offers four new models in its mobile generator portfolio that have been designed to meet federal Environmental Protection Agency (EPA) Tier IV Interim (Tier IVi) emission standards. The new models include: • The G150, with a prime power rating at 152 kVA / 122 kW • The G190, with a prime power rating at 194 kVA / 155 kW • The G240, with a prime power rating at 238 kVA / 190 kW • The G325, introduced earlier this year, with a prime power rating at 326 kVA / 261 kW These new Doosan generators have been substantially redesigned from their predecessors to incorporate numerous innovations based on customer input to improve the operator experience.

panel from Doosan now includes the controls and indicators required to operate and maintain the aftertreatment regeneration system that is a key component of the new Tier IVi technology to meet engine emissions. A run/idle switch on the control unit ensures reduced engine wear during startup in extreme cold temperatures. Dual frequency capability is now standard on the Tier IV portfolio to expand the versatility of the machines to power 50Hz applications with the simple flip of a switch. All four generators feature a voltage selector switch for quick and easy configuration for most common voltages. The signature protection feature on Doosan Portable Power generators prevents operators from switching voltage during operation — a common cause of downtime and expensive component failure, according to the manufacturer.

Controls Are Simplified for Easy Operation The new operator-preferred analog control panel has been enhanced featuring large, brightly lit meters for at-a-glance monitoring. The onboard engine diagnostic display

Connection Panels Connection panels are now more accessible for improved safety and convenience with more power wiring connections available, an optional camlock panel to further expand connection versatility, an array of

twist-lock and GFCI receptacles and a terminal board that accepts bare wire or lugged cable. Panels are “tool release” to protect against contact with live electrical terminals and connection areas are illuminated to improve safety during nighttime operation. Sound Levels Sound levels are reduced by as much as 5 dBA to ensure quiet operation. Because Tier IVi technology increased the cooling needs of the generator, Doosan Portable Power took the Tier changes as an opportunity to develop a completely new and unique approach to package cooling from the ground up. The rugged enclosure features a dualcompartment design, incorporating the powertrain and cooling system into separate compartments. The package design combined with the use of electric cooling fans and a radial-fan in the new Tier IVi generators yield lower sound levels without sacrificing performance or reliability — even at extreme temperatures — and all with minimal increase to the generator footprint, according to the manufacturer.

Serviceablility Serviceability continues along with Tier IVi technology. The new generators from Doosan Portable Power have 500-hour service intervals. Longer runtime — exceeding 24-hours at any load factor — is ensured with these new units due to increased onboard fuel capacity. Reliability The heavy-gauge galvannealed steel enclosure is finished with a 13-stage powder-coat process to provide the ultimate in corrosion protection, while ensuring superquiet operation. The environmental containment system contains and prevents spillage of fuel and oil, while the new enclosure design yields nearzero water ingression into the containment basin, even in the heaviest of rainstorms. For safe and trouble-free towing, the mobile generator units are built on heavyduty skid bases and feature the toughest running gear components for on- or off-road transportation. For more information, visit doosanportablepower.com.

Page 78 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AEM, ARA Call Oil Sands Industry Trade Mission in Calgary, Canada, a Success The Association of Equipment Manufacturers (AEM) recently led a delegation of small and medium-sized member company representatives from the heavy off-road equipment industry on an oil sands trade mission. The trade mission also was sponsored by the American Rental Association (ARA). The group arrived in Calgary for a briefing on the oil sands industry, and the regulatory and political environment in Alberta. Speakers for the briefing included former Syncrude Vice President Don Thompson, HBW Resources Executive Vice President in Canada Randy Kerr, and TransCanada Pipelines Supply Chain Management Director Grant Martin. The following day the representatives headed to Ft. McMurray to tour Syncrude Canada and receive a briefing by the Wood Buffalo Regional Municipality on the economic and political status of the oil sands, and future projections of growth and investment in the area. “The Canada oil sands are a bright spot for safer and securer oil in North America, and show tremendous promise of long-term investment and growth for the U.S. heavy offroad equipment industry,” AEM Vice President of Global Public Policy Nick Yaksich said. “As the industry continues

to grow, equipment manufacturers will play an important role in providing the much needed resources for these sites to successfully operate. Swift approval of the Keystone XL pipeline will boost the American economy by creating more manufacturing jobs right here at home.” “We are incredibly impressed by the advances taking place on the oil sands as this region rapidly becomes a leading global source for secure energy,” ARA Vice President of Government Affairs, John McClelland said. “Equipment rental companies operating in the area are investing heavily in their rental fleets to meet the demand for equipment that continues to expand as oil sands projects expand. State Department approval of the Keystone Pipeline could expand production at the oil sands, and increase demand for rental equipment at the oil sands and all down the pipeline throughout North America. These sands are proof of positive advances in North American energy security and we look forward to continuing to support this important industry.” The State Department is currently reviewing the proposed permit for the Keystone XL oil pipeline. Prompt approval will create over 18,000 high-wage jobs in construction and manufacturing while providing a stable supply of North American energy to consumers in the United States.

TransCanada Tweaks First Plan, Aims to Protect Vital Water, Natural Resources PIPELINE from page 1

al tweaks that April plan, making the route veer east shortly after entering the state to avoid more of the sensitive areas in Keya Paha County, east again around the town of Clarks and west around the town of Western to avoid drinking water well fields. “TransCanada shares the goal of protecting key water and natural resources with Nebraskans,” TransCanada CEO Russ Girling said. The proposal also upgrades planned safety measures, adding more remote control shut-off valves and inspections, the company said. Nebraska regulators said they would review the new proposal and hold a public hearing on it before submitting a recommendation to the governor, possibly by the end of the year. The governor will decide whether to approve the new route for the pipeline. “An initial scan of the report indicates that it responds to some of the comments raised by the NDEQ and the public, but a full evaluation will now

begin,” said Mike Linder, director of the state agency. Environmental groups have long opposed the pipeline project because of concerns that it could contaminate underground and surface water supplies, increase air pollution around refineries and harm wildlife. Bold Nebraska’s Jane Kleeb said the latest new route doesn’t go far enough to address her group’s concerns about potential erosion of the Sandhills and groundwater contamination, so she believes state and federal officials should block the pipeline. “The route still crosses the aquifer and it still crosses sandy soil, so all of the same concerns remain,” Kleeb said. TransCanada spokesman Grady Semmens said only 36 mi. (58 km) of the 275 mi. (442 km) of pipeline in Nebraska would cross sandy soils, and the new route entirely avoids the area Nebraska defined as the Sandhills. Joe Mendelson of the National Wildlife Federation said the Keystone

XL pipeline puts too much natural habitat at risk. “The best approach is to ditch Keystone XL entirely and embrace clean energy solutions that don’t spill or explode,” Mendelson said. The pipeline is designed to carry oil from Canada across Montana, South Dakota, Nebraska, Kansas, Oklahoma and Texas. TransCanada also has proposed connecting it to the Bakken oil field in Montana and North Dakota. President Barack Obama rejected TransCanada’s original application for a federal permit to build the pipeline in January after congressional Republicans imposed a deadline for approval that didn’t allow enough time to address questions about the route through Nebraska. Since then, TransCanada has split the project into two pieces. The company began construction in July on the southern section of the pipeline between Oklahoma and the Gulf Coast.

And Your Hitachi Dealers

Coastal Equipment Corp www.coastalequipment.net 504 South Military Hwy. 333 Freedom Blvd. Virginia Beach, VA 23464 Yorktown, VA 23692 757/424-1900 757/898-1900

Carolinas’ Division 9550 Statesville Road Charlotte, NC 28269 704/597-0211 Fax 704/596-6198 101 Bruce Rd. Asheville, NC 28806 828/667-0176 Fax 828/667-4865 411 South Regional Road Greensboro, NC 27409 336/668-2762 Fax 336/668-3714 288 Westgate Drive Wilkesboro, NC 28697 336/973-8201 Fax 336/973-8496 305 N. Main St. Mt. Gilead, NC 27306 910/439-5653 Fax 910/439-4568

380 Anderson Road Highway Rock Hill, SC 29730 803/325-1555 Fax 803/325-1506 2510 Highway 70 SW Hickory, NC 28602 828/322-4300 Fax 828/322-4244 2421 US Highway 64 East Asheboro, NC 27203 336/625-2212 Fax 336/625-0738 2725 Old Monroe Road Matthews, NC 28104 704/821-7399 Fax 704/821-4915 805 Klumac Road Salisbury, NC 28144 704/636-2671 Fax 704/636-4827

Virginia Division 11047 Leadbetter Rd. Ashland, VA 23005 804/798-6001 Fax 804/752-7111 1711 E. Hundred Rd. Chester, VA 23836 804/748-9324 Fax 804/530-1930 Route 360 & 460 Burkeville, VA 23922 434/767-5578 Fax 434/767-3774 3902 W. Main St. Salem, VA 24153 540/380-2011 Fax 540/380-5547 98 Expo Road Fishersville, VA 22939 540/337-3057 Fax 540/337-1495

287 Victory Road Winchester, VA 22602 540/667-9777 Fax 540/667-9441 9107 Owens Drive Manassas Park, VA 20111 703/631-8500 Fax 703/631-4715 2055 South Boston Road Danville, VA 24540 434/822-6110 Fax 434/822-6055 10879 Houser Dr. Fredericksburg, VA 22408 540/898-8933 Fax 540/373-8842

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 79

1128 Hwy 70 West Garner, NC 27529 919/772-2121 Fax 919/779-5432 3604 Highway 264E Greenville, NC 27834 252/758-4403 Fax 252/758-6508 3816 Martin Luther King Blvd New Bern, NC 28562 252/638-5838 Fax 252/638-2949 5039 US 301 South Fayetteville, NC 28348 910/424-1200 Fax 910/424-8763 Northside Industrial Park Wilmington, NC 28429 910/675-9211 Fax 910/675-3640 Highway 42 Aulander Road Ahoskie, NC 27910 252/332-5550 Fax 252/332-4186

Equipment Company Flint Equipment Company 1206 Blaylock St. Albany, GA 31705 229/888-1212 Fax: 229/435-3612 180 Princeton Blvd. Adairsville, GA 30103-2628 770-773-9857 Fax: 770-773-7226 4500 Wendell Dr. SW Atlanta, GA 30336-1627 404/691-9445 Fax: 404/696-1170 5333 BBS Way Braselton, GA 30517-1707 770-965-1889 Fax: 770-965-1894

Be fuel efficient with clean-burning ning Interim Tier Tier 4-certified engines while maximizing your productivity with smoothrunning, greaterr-than-ever -than-ever horsepower, arm force, digging force, and lift capacities. See your Hitachi dealer today about the exciting new crop of Dash-5 excavators. www w.hitachiconstruction.com .hita

the COLOR of QUALITY

251 Perry Lane Road Brunswick, GA 31525 912-264-6161 Fax: 912-264-5263 2400 Victory Dr. Columbus, GA 31902-3457 706/687-3344 Fax: 706/682-4738 515 Chamblin Rd. Grovetown, GA 30813-3905 706/855-5440 Fax: 706/855-5447 136 Acres Drive Ladson, SC 29546 843/572-0400 Fax: 843/572-7746

4600 Pio Nono Ave Macon, GA 31206-5064 478/788-1586 Fax: 478/781-8591

169 Ross Clark Circle N.E. Dothan, AL 36303 334/794-8691 Fax: 334/794-8696

4900 East Highway 501 Aynor, SC 29511 843/358-5688 Fax: 843/358-2826

3464 Sunset Boulevard West Columbia, SC 29169 803/794-9340 Fax: 803/794-9346

7566 W. TENNESSEE ST. Tallahassee, FL 32304 850/575-5600 Fax: 850/575-9972

50 Morgan Industrial Blvd. Garden City, GA 31408 912/964-7370 Fax: 912/964-1822

116 Corporate Drive Simpsonville, SC 29681 864/963-5835 Fax: 864/963-7405

178 Seaboard Road Andrews, SC 29510 843/221-4940 Fax: 843/221-4942

3033 US Highway 27 East Perry, FL 32348 850/584-9200 Fax: 850/584-2844

1220 Henderson HWY Troy, AL 36081 334/566-4181 Fax: 334/566-4361

4717 Jefferies Hwy Walterboro, SC 29488 843/539-1420 Fax: 843/539-1424

Page 80 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

SEE YOUR BARGAIN AD IN COLOR.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 AERIAL LIFTS Manlifts GRADALL / LULL Sales - Service - Training Modern Equipment Sales & Rental 800-445-4381 ASPHALT EQUIPMENT Asphalt Rollers 2007 Dynapac CA150D, 66 inch, 20,000 lbs., soil roller, ROPS and vandal cover, very good condition, 91 hours.....................$79,900. 847-437-8686 Milling Machines 2006 Dynapac PL2000, 80'' planer, front loading conveyor, good condition, 3423 hours ..................$189,900. 2006 Dynapac PL500, 30'' planer, 20'' drum, very good cond, 2780 hrs.......$47,500.

Modern Equipment Sales & Rental 800-445-4381 Mini Excavators NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 FORKLIFTS Industrial Forklifts GRADALL / LULL Sales - Service - Training Modern Equipment Sales & Rental 800-445-4381 Rough Terrain Forklifts

Casey Equipment Co. 847-437-8686

2010 JCB 930-4, canopy model, 4WD, 6000 lb lift capacity, 22 ' mast, 48'' forks. Pictures available. Low hours ............$33,000.

COMPACTION EQUIP.

908-625-0697

Pneumatic Rollers

GENERATORS & GEN SETS

2006 Vibromax VM1500, 33'' drum width, trench roller, 23 hp, 3600 lb operating wt., low hours. Pictures available.......................Call 908/625-0697 CRANES Crane Inspections ALL TYPES OF CRANES INSPECTED AND CERTIFIED Accredited by the US Dept. of Labor Under 29CFR Part 1919 and Accredited by CALOSHA Call 215-639-2579 Atlantic Crane Inspection Services Visit us at www.atlanticcrane.com EXCAVATORS

Generators & Gen Sets 2008 Ingersoll Rand G290, 290KVA, trailer mounted, like new, 300 hours ..............................$55,000. 305-945-2581 LOADERS Backhoe Loaders JCB 3CX-14, fully loaded, 4WD, Servo controls, powershift trans., Extra- Dig, pipe work loader, 1.4 ys bkt & 21'' bucket, mint, low hours ...........................Call 908-625-0697 Wheel Loaders

Hydraulic Excavators

NH Construction Equipment

New & Used Parts & Service

Modern Equipment Sales & Rental 800-445-4381

Track Loaders 2006 JCB 1110T, 84 turbo canopy model, new 17'' tracks, Servo controls, hyd pump (new), good condition, 1100 hours ..............................$32,500. 908-625-0697

Prevent theft, vandalism, and unauthorized borrowing of your skid loaders! Lock both drive controls of all skid loaders. Receive $50 off your Skidsteer Lock order. Call or use coupon code CEGSSL at checkout. The Equipment Lock Company Visit www.equipmentlock.com or call toll free 1.866.Lok it up (565-4887) 20-21 AP

ONLY $50 EXTRA FOR 2 INSERTIONS

TELEHANDLERS

Here's how the BARGAIN ADS Work:

Telescopic Handlers

• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

2011 Case 586G, 4WD, straight mast, all terrain forklift, 16' mast, load control, excellent cond., 5 hours............................Call 800-432-0913 TRAINING Operator Training NCCCO Crane Operator Training Tower Rigger Knuckleboom Crane Signal Person TRAINED AT YOUR LOCATION All trainers NCCCO Certified Call 800-841-6189Atlantic Crane Inpection ServicesVisit us atwww.atlanticcrane.com

• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 24,273 Construction Equipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

IMI Also Indicates More Metro Areas Show Signs of Recovery HOUSING from page 1

chairman of the National Association of Home Builders (NAHB) and a home builder from Gainesville, Fla. “This solid growth is Are your operators compliant with Federal Standards, an encouraging sign that housing continues OSHA, ANSI, ISO? on a slow but steady recovery path that is MODERN GROUP gradually advancing from one local market offers training for: to the next.” Front-end Loaders & Backhoes “More metros across the country are Aerial work platforms (AWP) experiencing a sustained uptick in house (Boom & Scissor Lifts) prices, employment and new building activRough Terrain Forklifts (Gradall, Lull, JCB) ity as rising consumer confidence in local Skid Steer Loaders market conditions pushes more people to consider a new-home purchase,” observed For information, pricing or reservations: NAHB Chief Economist David Crowe. Call 1-800-223-3827 www.moderngroup.com “That said, overly tight lending conditions All prices include Trainer, for builders and buyers continue to slow this travel and material NO HIDDEN COSTS process considerably.” “Combined with recent positive reports TRENCHING EQUIPMENT on builder confidence, housing starts and Trenchers new-home sales, the September IMI adds to 2009 Stone Bulldog TR34, the growing consensus that housing is finalnew, unused, remote opera- ly moving in the right direction, which in tion, 34'' drums, 0 hours turn is spurring more potential buyers to get ............................$28,500. off the fence,” added Kurt Pfotenhauer, vice 336-685-4998

chairman at First American Title Insurance Company. The IMI is designed to track housing markets throughout the country that are showing signs of improving economic health. The index measures three sets of independent monthly data to get a mark on the top improving Metropolitan Statistical Areas. The three indicators that are analyzed are employment growth from the Bureau of Labor Statistics, house price appreciation from Freddie Mac and single-family housing permit growth from the U.S. Census Bureau. NAHB uses the latest available data from these sources to generate a list of improving markets. A metropolitan area must see improvement in all three measures for at least six months following those measures’ respective troughs before being included on the improving markets list. A complete list of all 99 metropolitan areas currently on the IMI, and separate breakouts of metros newly added to or dropped from the list in September, is available at www.nahb.org/imi.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 81

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. KOMATSU DOZERS | I AM LOOKING FOR THE FOLLOWING USED KOMATSU DOZERS: D 6 5 D 8 5 D 1 5 5 EMAIL US WITH PICTURES, SERIAL NUMBER, YEAR MODEL, PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– BOBCAT BRAND SKID STEER LOADERS LOCATED IN THE SOUTH EASTERN UNITED STATES | AM PAYING CASH FOR BOBCAT BRAND SKID STEER LOADERS. ESPECIALLY LOOKING FOR LARGE FRAME AND "GOLD PACKAGE" MACHINES, BUT ANY MAKE AND MODEL BOBCAT WILL BE CONSIDERED. PLEASE SEND PHOTO AND ASKING PRICE. ***DEALERS NEED NOT RESPOND*** CONTACT: WARREN EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 & BR580 TRACK JAW CRUSHERS | LATE MODEL LOW HOUR WORK READY USA LOCATION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– CATEPILLAR 3412 | HELLO I AM LOOKING FOR THE SPIDER ASSEMBLY AND THE SHAFT INPUT FOR THE 3412 CATERPILLAR. THE SPECS ARE AS FOLLOWS: SERIAL # 60M03370 ARRANGEMENT# 4N2247 CLUTCH DESCRIPTION: MODEL# GM518-1 SERIAL # 3R5140 BOM# 37705 RATIO# 6.48:1 I AM LOOKING FOR THEM NEW OR USED. CONTACT: ROBIN MILLER PHONE: 7867525438 EMAIL: ROBIN_MILLER@RKSTRADING.COM –––––––––––––––––––––––––––––––– YANMAR EXCAVATOR CONTACT: JOHN SARAPPA PHONE: 856 767 1122 FAX: 856 767 4931 EMAIL: JOHN@SARAPPA.COM –––––––––––––––––––––––––––––––– MAS HEAVY EQUIPMENT | LOOKING FOR EXCAVATOR DAEWOO OR DOSSAN 290 LCV/300LCV/420LCV/470LCV CATERPILLAR 235 C OR D /225 SAMSUNG 280-2 WHEEL LOADER CATERPILLAR 920-930-936-950-966D E F -970F 966G -972G-980G-980F DOZER CATERPILLAR D9N&D10N KOM. 355 CONTACT: MODY SHOUKRY PHONE: 8155435252 FAX: 8153986715 EMAIL:MSHOUKRY9@GMAIL.COM –––––––––––––––––––––––––––––––– HYDRAULIC DRIVE MOTOR FOR A DITCH WITCH 5020 TRENCHER | DESCRIBE WHAT YOU WANT. CONTACT: RICHARD SPRIGGS PHONE: 423-487-5048 EMAIL: RSPRIGGS@PLEASECALLNUMBER.COM –––––––––––––––––––––––––––––––– NEEDED FAST KOMASTU 155A X 6 2009 WITH RIPPER USER LOW LOW HOURS I NEED 2 CONTACT: JEAN MAURICE BOUTIN EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM ––––––––––––––––––––––––––––––––

WE BUY EQUIPMENT MANUALS | WE BUY ALL KINDS OF CONSTRUCTION, FARM AND HEAVY EQUIPMENT MANUALS. I PREFER TO BUY 100 OR MORE MANUALS PREFERRABLY FROM BUSINESS COMPANIES. IF YOU’RE TIRED OF LOOKING AND STORING EXCESS MANUALS, PLEASE GIVE ME A CALL AT 270-849-2270 OR EMAIL AT TRITOWN1@MSN.COM. THANKS GRACE CONTACT: GRACE FRANCES PHONE: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WATER TRUCK | NEED USED WATER TRUCK. 10, 000-15, 000 CAP. MINE SITE SPEC IF POSSIBLE CONTACT: ROB KOHLER PHONE: 0411277332 EMAIL: KORECRANES2@OPTUSNET.COM.AU –––––––––––––––––––––––––––––––– LEFT REAR PLANATARY FOR CASE 721C | DESCRIBE WHAT YOU WANT. CONTACT: J. R. WALLIN PHONE: (281) 844-8489 FAX: (979) 921-0020 EMAIL:WALEXCSERV@AOL.COM –––––––––––––––––––––––––––––––– FT REAR PLANATARY FOR CASE 721C CONTACT: J. R. WALLIN PHONE: (281) 844-8489 FAX: (979) 921-0020 EMAIL:WALEXCSERV@AOL.COM –––––––––––––––––––––––––––––––– NEEDED BULLDOZER D7H FROM EAST COAST USER I NEED 3 CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL:JEANMAURICEBOUTIN@BULLDOZERJM.COM –––––––––––––––––––––––––––––––– BOMAG CONTACT: KENNY EMAIL: NDALA.KENNY@GMAIL.COM –––––––––––––––––––––––––––––––– ANY TRACK MACHINE CONSIDERED CONTACT: DAYNA PHONE: 832-603-2097 EMAIL: AEXPTRANSPORT@LIVE.COM –––––––––––––––––––––––––––––––– DUSTLESS BLASTER MODEL DB500 CONTACT: MICHAEL PHONE: 314-796-6558 EMAIL: MPAZ56MO@GMAIL.COM –––––––––––––––––––––––––––––––– ( 3 ) CAT 769C OR TEREX R50 OR CAT 773B TRUCKS | WORK READY TRUCKS, MIDWEST LOCATION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– TEREX TA30 GEN 7 OFF ROAD TRUCKS | (2 ) 2007-2008 TRUCKS, MAX. 3500 HOURS, CLEAN WORK READY, USA LOCATION CONTACT: RICHARD PHONE: 603-828-6100 EMAIL: CMIEQUIP@YAHOO.COM –––––––––––––––––––––––––––––––– SCAFFOLDS, STAGE SWINGS, CEMENT MIXERS CONTACT: GILROY ALBURY PHONE: 242-468-4488 EMAIL: GILROYJR06@HOTMAIL.COM ––––––––––––––––––––––––––––––––

BOBCAT BRAND SKID STEER LOADERS LOCATED IN THE SOUTH EASTERN UNITED STATES | AM BUYING BOBCAT SKID STEER LOADERS, PREFER LARGE FRAME MACHINES AND "GOLD PACKAGE" UNITS, HOWEVER ANY BOBCAT SKID STEER LOADER WILL BE CONSIDERED. SEND PHOTOS AND ASKING PRICE. ***DEALERS NEED NOT RESPOND*** CONTACT: WARREN EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– SERVICE MANUAL FOR CAT 303C CR CONTACT: KEVIN SANSALONE PHONE: 856-297-4758 EMAIL:KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– NEED ALL 12 MONTHS BULLDOZER D3 AT D10 FROM USER USA INSPECTION BULLDOZER CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM –––––––––––––––––––––––––––––––– USED EXCAVATOR PART | SWING MOTOR FOR A JOHN DEERE 690C EXCAVATOR IT IS A COMMERCIAL INTERTECH #323-9210-011 JD PART # AT77614 CONTACT: LOREN LINDL PHONE: 920.650.3870 EMAIL: LORDON1@CENTURYTEL.NET –––––––––––––––––––––––––––––––– KOMATSU D51EX22 TRACK DOZER | AIR CAB, 1000 +/- HOURS, USA LOCATION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMIEQUIP@YAHOO.COM –––––––––––––––––––––––––––––––– CASE 580 LOADER BACKHOES | MODEL 580 K SK L SL M SMS CONTACT: FRANK, TRICO EQUIPMENT PHONE: 800-654-USED (8733) EXT. 1230 FAX: 732-780-3618 EMAIL: FHORAN@TRICOEQUIPMENT.COM –––––––––––––––––––––––––––––––– MULCHER 250350 H/P | 2005-2007 BRON LH 250-400 MULCHER CONTACT: DARSEN PHONE: 9174406319 FAX: 9174406319 EMAIL:MAFAUTOBOAT@YAHOO.COM ––––––––––––––––––––––––––––––––CO NSTRUCTION EQUIPMENT | FAIRLY USED: 1) 950 & 966 CAT 2) COMPACTOR (DRUM & TIRE) 3) BULLDOZER (D6) CAT 4) LOW BED 5) MACK TRUCKS (20032005...) CONTACT: MONTY PHONE: 646-515-7645 FAX: 718-887-8575 EMAIL:MONTYUWA@YAHOO.COM –––––––––––––––––––––––––––––––– FOREST EQUIPMENT | BRUSH FORKS CONTACT: DENNIS TRUJILLO PHONE: 505 617 0211 EMAIL: SOUTHWESTWOOD PRODUCTS@YAHOO.COM –––––––––––––––––––––––––––––––– LARGE EXCAVATOR | ANY BRAND, PREFERABLY GOOD TO VERY GOOD. CONTACT: DON JOHNSON PHONE: 218 784 8301 FAX: 218 784 7569 EMAIL:IMBROKEFARMS@GMAIL.COM ––––––––––––––––––––––––––––––––

SANDVIK TITON DI 600 | LOOKING FOR A SECOND HAND SANDVIK TITON DI 600, FROM YOM 2005 UPWARDS, IN GOOD CONDITION CONTACT: ALIDAD PHONE: 004916098648980 EMAIL: POURYA_HCL@YAHOO.COM –––––––––––––––––––––––––––––––– LOOKING FOR THE FOLLOWING USED KAWASAKI LOADERS. 5 0 Z-II, 5 0 Z-IV, 5 0 Z-V 6 0 Z-II, 6 0 Z-IV, 6 0 Z-V 6 5 Z-II, 6 5 Z-IV, 6 5 Z-V 7 0 Z-II, 7 0 Z-IV, 7 0 Z-V 8 0 Z-II, 8 0 Z-IV, 8 0 Z-V 8 5 Z-II, 8 5 Z-IV, 8 5 Z-V 9 0 Z-II, 9 0 Z-IV, 9 0 Z-V 9 5 Z-II, 9 5 Z-IV, 9 5 Z-V CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– 305 CAT EXCAVATOR CONTACT: SOLOMON JACK PHONE: +447024065565 EMAIL: UNLIMITEDEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– MOTOR GRADER 140G KOMATSU CONTACT: LEONARD MKUMBI PHONE: 0754561164 FAX: 0263121 EMAIL:MKUMBILEO4@YAHOO.CO.UK –––––––––––––––––––––––––––––––– WE ARE LOOKING FOR A 35-45 TON GROVE ROUGH TERRAIN CRANE CONTACT: HAENER CRANE & EQUIPMENT PHONE: 1-800-746-8106 EMAIL: HAENERCRNE@LEWISTON.COM –––––––––––––––––––––––––––––––– I AM LOOKING FOR 2 SULLAIR AIR COMPRESSORS IN GOOD GOOD WORKING CONDITION. 2000-2003, 750 CFM, 150 PSI, AFTERCOOLED AND FILTERED, CAT DIESEL 3306, PORTABLE HIGHWAY TRAILER CONTACT: PEDRO LI PHONE: 323-707-6063 EMAIL: PEDROMLI@ IMPORTSAMERICAS.COM –––––––––––––––––––––––––––––––– NEEDED BULLDOZER D4H D5H D6H LOW LOW HOURS USER LGP OR STRAIGHT PADS USA USER CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– KOMATSU BR380 JG1 TRACK JAW CRUSHER • LATE MODEL, LOW HOUR, USA LOCATION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– KOBELCO SK80 SK135 PARTS • I NEED A FRONT WINDOW FRAME, GLASS AND HARDWARE FOR A KOBELCO SK80 SK135 CONTACT: MICK PHONE: 352-270-0070 EMAIL: MICK.FIELDS@FIELDCO.BIZ –––––––––––––––––––––––––––––––– DYNAHOE MODEL C BACKHOE • PLANETARY ASSEMBLY AND DRIVE AXLE NEEDED TO REPLACE STOLEN PARTS CONTACT: WILLIAM CRAIB PHONE: 518-658-2639 EMAIL: PZCWHC@HOTMAIL.COM ––––––––––––––––––––––––––––––––

USED LEFT DOOR FOR 2004 KUBOTA RTV900 2004 MO HARD DOOR. CONTACT: P SMITH PHONE: 203-586-8712 EMAIL: MIMISMITH0722@YAHOO.COM –––––––––––––––––––––––––––––––– HYDRAULIC HAMMER/ DROP HAMMER • WTB WORKING OR NON WORKING HAMMERS ANY SIZE LARGE OR SMALL NO DEALERS PLEASE CONTACT: JAMES MANN PHONE: 404-273-9424 FAX: 770-306-2962 EMAIL: JAMES2525@MSN.COM –––––––––––––––––––––––––––––––– 53X102 DROP DECK FLATBED • 53X102" AIR RIDE, AIR SPREAD, ALUMINUM/ STEEL COMBO OR ALL STEEL DROP DECK FLATBED. MUST HAVE RECENT DOT INSPECTION. PREFER TELEPHONE CONTACT @918-351-4646. CONTACT: IAN PHONE: 918-351-4646 EMAIL: MAKMAIL@MAKADAMGROUP.COM –––––––––––––––––––––––––––––––– QUICK CONNECT FOR 305 CAT EXCAVATOR CONTACT: JAKE DERR PHONE: 609-868-8759 FAX: 856-845-5012 EMAIL: DERRANDSON@YAHOO.COM –––––––––––––––––––––––––––––––– NEED TO BUY THE FOLLOWING CAT MOTOR GRADERS: 140G (1989, 1994, 1995, WITH RIPPER) 140H (2000-2002) 14G/H (1972 UP) CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL: SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– **WANTED** BOBCAT SKID STEER LOADERS AND MINI EXCAVATORS | AM INTERESTED IN BUYING BOBCATS LOCATED IN THE S.E. UNITED STATES. PREFER LARGE FRAME MACHINES S320, S300, S250, T320, T300, T250. PREFERENCE GIVEN "GOLD PACKAGE" MACHINES BUT ANY SIZE BOBCAT WILL BE CONSIDERED. PLEASE SEND RECENT PHOTO AND ASKING PRICE. DEALERS NEED NOT RESPOND. CONTACT: WARREN EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– WOOD CHIPPER CONTACT: SCOTT PHONE: 516-509-0335 FAX: 631-998-3897 EMAIL: LANDZIGN1@AOL.COM –––––––––––––––––––––––––––––––– LOOKING FOR USED STREETPRINT INFRARED HEATERS, STREET HEAT THEY ARE CALLED CONTACT: PAUL POLITO PHONE: 1-520-292-1125 EMAIL: PAUL@TUCSONASPHALT.COM –––––––––––––––––––––––––––––––– LOOKING TO PURCHASE THE FOLLOWING CATERPILLAR WHEEL LOADERS. 930 (1978-1986) 936 (1984-1992) 938G (AROUND YEAR 2005) 950B/E/G (1984 UP, FULL STEERING) 966C/D/E/F-II/G (1979 UP, FULL STEERING) 980C/F (1988 UP) CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:SALE@ALWAFAEQUIPMENT.COM ––––––––––––––––––––––––––––––––

TRANSMISSION ASSEMBLY | WE ARE LOOKING FOR A TRANSMISSION ASSEMBLY SUITABLE THE FOLLOWING MITSUBISHI 330 MOTOR GRADER. THE INFO AVAILABLE FOR THE MOTOR GRADER IS AS UNDER. SERIAL # OF GRADER MG003231, ENGINE SERIAL # 75761, MACHINE # 3QA00515, TRANSMISSION # 60325 - 80111, MODEL 3-5-93 CONTACT: ANIS SHERWANI PHONE: +923214696007 FAX: +92 42 35887118 EMAIL: ASHERWANI@SASCOM.PK –––––––––––––––––––––––––––––––– MINI EXCAVATOR | SMALL MINI EXCAVATOR FOR PERSONAL USE AT HOME NOT FOR BUSINESS CONTACT: TIM HAWKINS EMAIL: DARTIM76@YAHOO.COM –––––––––––––––––––––––––––––––– BACKHOE ATTACHMENT FOR JD 401D TRACTOR. J D MODEL # FOR HOE IS 9250A CONTACT: MARK BEYER PHONE: 707 538 0413 EMAIL: GAMMYRAY@SONIC.NET –––––––––––––––––––––––––––––––– SPECIALLY CAT MANUAL WHEEL LOADER | REGULAR REQUIREMENT OF MENTIONED MACHINES. (WE BUY FOR OUR OWN STOCK TIME TO TIME) MARKET MEET MACHINERY: CAT 910, 920, 930, 950, 950B, E & 966D, E AND 966F. CAT GRADER 140G S/N:10, 000 UP. DYNAPAC ROLLERS CA251D, CA262D, CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 1999~2005 HITACHI EXCAVATOR EX200-1, EX100WD-1, EX60WD-1, UH07-7, UH083 KOMATSU EXCAVATOR PC 200-6, -7. CONTACT: IKRAM KHAN PHONE: +923002831078 EMAIL: IUKANDCO@GMAIL.COM––––––––––––– ––––––––––––––––––– LOOKING FOR D10N OR D10R WITH BAD OR NO ENGINE. CONTACT: J. R. WALLIN PHONE: 281-844-8489 FAX: 979-921-0020 EMAIL: WALEXCSERV@AOL.COM –––––––––––––––––––––––––––––––– KOMATSU BR380 JG1 TRACK JAW CRUSHER | LATE MODEL, LOW HOUR, WORK READY. USA LOCATION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– 325, 330, CL, BL | I NEED DOZER D7G, D8K, D6H, D6R WITH RIPPERS I NEED LOT OF OTHER EQUIPMENT, PLEASE EMAIL ME COMPLETE LIST CONTACT: ISMAIL USMAN PHONE: 4094541576 EMAIL: ISRAEQUIPMENT@AOL.COM –––––––––––––––––––––––––––––––– DOZER | 5 UNITS D5B DOZERS, CAB OR OROP, 5 UNITS OLD 930 WHEEL LOADERS, 2 X 730 TRUCKS UP TO 10,000 HOURS. CONTACT: JEFF WILLISON PHONE: 918-449-1966 EMAIL: JEFFWEQUIPCO@TULSACOXMAIL.COM ––––––––––––––––––––––––––––––––

Page 82 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Detroit, MI Fri., October 5, 2012 For: Construction Equipment, Trucks, Trailers, Support • Boston, MA Sat., October 6, 2012 For: Major Job Completion Auction • Houston, TX Thurs., October 11, 2012 For: Construction Equipment, Aerials, Forklifts, Large Water Pumps • Sacramento, CA Sat., October 13, 2012 For: Construction Equipment, Trucks and Trailers • Odessa, TX Sat., October 13, 2012 For: Construction Equipment, Trucks, Trailers, Support

• Kissimmee, FL Sat.-Sun., February 2-10, 2013 For: Annual 9 Day Auction! Construction Equipment, Trucks, Trailers, Support

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Hartford, CT October 4, 2012 • El Paso, TX October 10, 2012 • Chicago, IL October 11, 2012 • Sacramento, CA October 12, 2012 • Moultrie, GA October 19, 2012 • Tipton, CA October 19, 2012 • Northeast, MD October 23, 2012

• Putney, VT Sun., October 14, 2012 For: Complete Liquidation Santa’s Land Amusement Park

• Orlando, FL October 25, 2012

• Baltimore, MD Thurs., October 18, 2012 For: Construction, Asphalt Equipment and Trucks

• Atlanta, GA November 29, 2012

• Kissimmee, FL Wed., October 24, 2012 For: Construction Equipment, Support, Attachments, Aerial and Forklifts • Portland, OR Thurs., October 25, 2012 For: Construction Equipment, Support, Trucks and Trailers • Cobleskill, NY Sat., October 27, 2012 For: Construction Equipment • San Bernardino, CA Fri., November 2, 2012 For: Construction, Aerials, Support and Service Trucks • Syracuse, NY Sat., November 3, 2012 For: Late Model Rental Fleet Construction Equipment • Racine, WI Sat., November 10, 2012 For: Late Model Construction and Support Equipment • Houston, TX Tues., November 13, 2012 For: Construction Equipment, Forklifts, Aerial Lifts, Trucks and Trailers • Barranquilla, Columbia Sat., November 24, 2012 For: Late Model Construction and Support Equipment

• Pittsburgh, PA November 8, 2012

Coming Auctions • Prospect, CT December 8, 2012 For: Construction Equipment

DEL PETERSON & ASSOCIATES www.delpeterson.com 800-492-9090 • Online Only Closing October 23, 2012 For: Construction Equipment, Trucks & Trailers • Online Only Closing November 20, 2012 For: Construction Equipment, Trucks & Trailers • New Ross, IN Thurs., December 6 2012 For: Farm Equipment • Online Only Closing December 18, 2012 For: Construction Equipment, Trucks & Trailers

IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • ONLINE ONLY October 4, 2012 For: Construction Equipment • ONLINE ONLY October 10, 2012 For: Construction Equipment• ONLINE ONLY October 11, 2012 For: Construction Equipment

• ONLINE ONLY October 25, 2012 For: Construction Equipment

MOTLEY’S AUCTION & REALTY GROUP

www.itlauctions.us 508-824-3262

www.hunyady.com 800-233-6898

• Taunton, MA Sat., October 20, 2012 For: Construction Equipment

• Denver, CO October 25, 2012 For: Construction Equipment

DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.com 800-433-6670 • Harrison, MI Thurs., October 5, 2012 For: Fall Contractors Auction

ITL AUCTIONEERING

• Wind Gap, PA Wed., October 24, 2012 For: Late Model, Off Lease Equipment • Hellertown, PA Wed., November 7, 2012 For: Complete Liquidation Valley Excavating & Paving Inc.

INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225 • Sebring, FL Sat., November 10, 2012 For: Farm and Construction Equipment Auction

DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087 • Prospect, CT October 13, 2012 For: Construction Equipment

IRAY AUCTIONS www.iraymn.com 320-968-7230 • Foley, MN Fri., November 30, 2012

www.meekinsauction.com 800-499-6560

• Wilson, NC Thurs., January 31, 2013 For: Construction Equipment

HUNYADY AUCTION COMPANY

• Richmond, VA October 18, 2012 For: Construction/Mining Equipment

MEEKINS AUCTION COMPANY

• ONLINE ONLY October 24, 2012 For: Construction Equipment

• ONLINE ONLY October 10, 2012 For: Construction Equipment

• Sewickley, PA Thurs., October 11, 2012 For: Complete Liquidation Penfield Contracting

• Danielsville, GA Fri., November 2, 2012 For: Construction and Farm Equipment

• Lumberton, NC Sat., November 24, 2012 For: Construction Equipment

www.catauctions.com 866-750-9432

• Gallup, NM October 11, 2012 For: Construction/Mining Equipment

• Mt. Hope, WV Thurs., October 25, 2012 For: Construction Equipment, Trucks and Trailers

• ONLINE ONLY October 18, 2012 For: Construction Equipment

• Online Only Closing February 5, 2013 For: Late Model John Deere Farm Equipment

CAT AUCTION SERVICES

• Bristol, VA Wed., October 24, 2012 For: Construction Equipment, Trucks, Trailers and Tools

www.motleys.com 804-232-3300 • Richmond, VA Fri., October 12, 2012 For: Construction Equipment and Trucks

MYRON BOWLING AUCTIONEERS, INC.

KEENAN AUCTION COMPANY

www.myronbowling.com 513-738-3311

www.keenanauction.com 207-885-5100

• Eden, MD Thurs., October 18, 2012 For: Complete Liquidation American Paving Corp.

• Scarborough, ME Thurs., October 11, 2012 For: Construction Equipment, Screeners, Dump Trucks & Vehicles

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 800-763-2728 • Starkville, MS Sat., October 6, 2012 For: Forestry Equipment

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • Newark, NJ Wed., October 10, 2012 For: Heavy Construction, Bridge & Road Rehab Equipment

PURPLE WAVE AUCTION

THE AUCTION COMPANY

www.purplewave.com 866-608-9283

www.theauctioncompany.net 951-657-5300

• ONLINE ONLY Tues., October 9, 2012 For: Government Equipment

• Southern CA Sat., October 13, 2012 For: Construction Equipment, Trucks, Trailers

• ONLINE ONLY Thurs., October 11, 2012 For: Construction Equipment • ONLINE ONLY Tues., October 25, 2012 For: Construction Equipment

QUARRICK EQUIPMENT & AUCTIONS INC. www.josephfinn.com 724-439-1621 • Uniontown, PA Thurs., October 4, 2012 For: Construction and Farm Equipment

ROY TIETSWORTH AUCTIONEERS www.tietsworth.com 585-243-1563 • Rochester, NY Sat., October 6, 2012 For: Municipal/Contractor Auction

SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Windsor Locks, CT Sat., October 6, 2012 For: Construction Equipment, Trucks, Trailers

STEFFES UCTIONEERS INC. www.steffesauctioneers.com 701-237-9173 • Online Only October 1-9, 2012 For: Construction, Ag, Trucks & Vehicles • Online Only November 1-12 2012 For: Construction, Ag, Trucks and Vehicles • West Fargo, ND Wed., November 28 2012 For: Construction and Farm Equipment

• Northern CA Sat., October 13, 2012 For: Construction Equipment, Trucks, Govt. Vehicles • Northern CA Sat., November 17, 2012 For: Construction Equipment, Trucks, Govt. Vehicle • Southern CA Sat., December 8, 2012 For: Construction Equipment, Trucks, Trailers • Northern CA Sat., December 15, 2012 For: Construction Equipment, Trucks, Govt. Vehicles

UNITED AUCTIONEERS & APPRAISERS www.uaa-auctions.com 517-202-9173 • Charlotte, MI Thurs., October 18, 2012 For: Delta Electrical Contractors • Wilmington, DE Fri., October 26, 2012 For: Construction & Utility Equipment

UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Charlotte, MI Thurs., October 18, 2012 For: Commercial/Industrial

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Lenox, MI Thurs., October 25, 2012 For: Construction Equipment, Trucks Tractors, Gravel Trains & Trailers

• Pelzer, SC Wed., October 17, 2012 For: Construction and Farm Equipment

• Columbus, OH Thurs., October 18, 2012 For: Construction and Paving Equipment

TAYLOR AUCTION & REALTY, INC.

WESTERN CONSTRUCTION AUCTIONS INC.

• Brooklyn, MS Sat., October 20, 2012 For: Construction Equipment, Trucks, Trailers and Tools

• Moosup, CT Fri., October 16, 2012 For: Construction Equipment, Trucks & Trailers

www.taylorauction.com 662-226-2080

www.wca-online.com 760-731-7760

• Grenada, MS Sat., October 13, 2012 For: Annual Fall Auction

• Perris, CA Thurs., October 11, 2012 For: Heavy Equipment

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 83

Online A Auctions uctions www w.ironplanet.com w.ir

2010 T TOYOTA OYOT OT TA 8FGCU25

2004 CA CAT AT T CS-563E

CAT CA AT 621B

2009 CA CAT AT T 297C

2008 CA CAT AT T D6K LGP

2000 JOHN DEERE 310E 4X4

CAT CA AT 992C

1998 CA CAT AT T 963B LGP

CAT CA AT 14G

KOMA KOMATSU ATSU PC400LC-5L

TEREX R35B

A better w way ay to sell y your our equipment Call 855-685-5491 to add yyour our equipment to these online auctions ffor or faster m profitab faster,r,, more profitable le sales than traditional auctions auctions..

w w w.i ronpla net.com s 855 - 685 -5491

2005 JLG 3369LE

O October ctober A Auctions uctions SUN

MON

TUE

WED

THU

FRI

S SAT AT

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

C California alifor nia A Auction u c t i o n Company C o m p a n y Bond B o n d #70259785. # 70 2 5 978 5 . Preliminary P r e l i m i n a r y list l i s t to to date. d a t e . Equipment Eq u i p m e n t subject s u b j e c t to to change. c h a n g e . Copyright C o py r i g h t © 1999-2012 19 9 9 -2 012 IronPlanet, I r o n P l a n e t , Inc. I n c . All A l l Rights R i g h t s Reserved. R e s e r v e d . IronPlanet I r o n P l a n e t ®, IIronClad ronClad A Assurance s sur ance ® a and nd A Auctions u c t i o n s yyou ou c can a n ttrust r ust ® a are r e registered re g i s ter e d service ser v i c e marks ma r ks o off IIronPlanet, r o n P l a n e t , IInc. nc. A Alll l o other ther m marks ar ks a and nd b brands r ands a are r e tthe he p property roper t y o off ttheir h e i r rrespective e sp e ct i ve o owners. w ner s.

Page 84 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JM Wood Auction Holds Multi-Day Sale in Montgomery

M Wood Auction Company Inc.’s multi-day sale at its headquarters in Montgomery, Ala., held on Sept. 12 and 13, was another huge success for this year. Company representatives stated that there were bidders from 15 countries and 34 U.S. states who purchased more than $17 million of equipment. High on the list of items in demand were several 2008 Cat 725 trucks from a Cat dealer rental fleet and a number of 2012-2009 Mack GU713 tri-axel dumps from numerous government agencies. “We had contractors from across the country here at the auction bidding on and buying equipment,” said Vice President Bryant Wood. “We have been sending a lot of equipment overseas for the last 36 months, but contractors from across the country are coming to the auctions because they are at a point where they need to update their fleets or reposition their fleets to the work they have going on. It’s very encouraging to see some of these contractors here at the auction whether they are buying equipment or not, they are bidding on it…and that’s what we all want to see.”

A long way from home and making the most of his inspection time is Corey Cossey, W.A. Rasic Construction, Long Beach Calif., checking out a Deere 624J wheel loader. Taking a moment to discuss what’s going on in the world (L-R) are Buddy Hughes, Hughes Air Conditioning, Millbrook, Ala; Richard Reid, Southern Excellence, Millbrook, Ala.; and Grady Willett, Triple W Construction, Altoona, Ala.

A trio of nice-looking Hitachi 350 Zaxis excavators were in the sale lineup.

Checking under the hood of a Deere dozer of interest are Henry Lynn and Joey Cauthen, Regional Electric, Montgomery, Ala. (L-R): Philip Parker and Trip Pittman of Pittman Tractor, Daphne, Ala., discuss some machines of common interest with Wayne Eldridge of J & W Marine, Bayou La Batre, Ala. Three Cat 725 trucks rolled on and off the ramp rather quickly as one buyer snagged all three of them for $160,000 each.

Looking over a Komatsu PC 200LC are Mike Gunn (L), Carrville Gin Company, Tallassee, Ala., and Tommy Burton, independent contractor, also based in Tallassee, Ala.

Test operating a Deere 450J LGP is David Moore, Construction Equipment Rental and Sales, Jackson, Tenn.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 85

Page 86 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Alex Lyon & Son, Martin & Martin Join for Sept. Auction in Bremen, Ga.

joint venture of Martin & Martin Auctioneers & Alex Lyon & Son Auctioneers resulted in another successful auction west of Atlanta in Bremen, Ga., on September 19. The sale was a one-owner complete liquidation of construction equipment, trucks, trailers, support equipment and featured a substantial paving and compaction line up of machines.

The father and son team of John (L) and Stephen J. Connolly, ATS Equipment Inc., journeyed from New England to see if they could snag some deals at this sale.

Inspecting one of the three Takeuchi TL130s in the sale is Zak Zakeri, AutoMaster, Lawrenceville, Ga. Discussing some of the Cat machines that were about to go on the block are John Gorham (L), Yancey Bros. Co., Austell, Ga., and Brian Wilson, independent equipment dealer in Atlanta.

It was a picture perfect September day in Georgia and a nice turnout for the sale. Phoning his office in New York while jotting some notes on a JCB Loadall of interest is Mike Montano of Montano Equipment Sales and Rentals, Saugerties, N.Y.

Local contractor Wayne Cole (L), Temple, Ga., and Edward Rude, TM Trading, Falling Waters, W.Va., swap notes about the dozers in the sale.

The smaller dual drum Bomag rollers were a comfortable resting spot for Bobby and Deborah Miles, Texas Skid Steer, Springtown, Tex., as they wait for the skid steer auctioning to begin.

Joey Martin (L), Martin & Martin Auctioneers, and Jack Lyon, Alex Lyon & Son, scan the crowd for one final bid on a backhoe loader.

Watching the bidding are J.R. Atkinson, Jr. (L), J & J Truck Sales, Dry Fork, Va., and Lee Mashburn, Mashburn Equipment, Ringgold, Ga.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 87

Annual Fall Auction Sat., Oct. 13th • 10:00 am 15488 Hwy. 51 North Grenada, MS 38901

Live/Simulcast Auction. Visit www.taylorauction.com to view catalog

Day 1 Fri., October 12 @ 9AM

Day 2 (Online Only) Support Equipment Commonwealth of VA, Sunbelt Rentals

Bid October 8 - October 13 Bidding Closes October 13 Beginning @ 10AM

Must Register With Proxibid Bidding Now Open! Bid at Home, WiFi On-Site, Use our Bidding Station or Absentee Bids Accepted!

Accepting Items Daily Through 10/10. Sell Your Idle Assets Now!

Dozer / Backhoes: 1989 Caterpillar D4C Dozer; G & S Storage Unit / Portable; Modular Space Job 1989 Case 580 K Backhoe; 2003 New Holland 555E Trailer; Mobile Office Trailer Backhoe; 2000 New Holland LB75 4WD; 1992 Case Support Equipment: Pressure Washers, Laser 580 SK Backhoe; 1998 New Holland 555 E Backhoe; Equipment, Generators, Hand Tools, Guard Fencing, 1997 New Holland 555 E Backhoe Scaffolding, Fuel Tanks, Extra Backhoe Buckets Excavators: 2000 Linkbelt 2650; 2001 Bobcat City of Grenada: John Deere 6405 tractor with 325; Yanmar 27 Mini Excavator Tiger side boom mower & John Deere MX8 rear Telescopic Lifts: 1999 Manitou MTV 1130 Lift; bushog; Tractor; 1997 Ford F-Series Dump Truck; 2000 Genie 245/25, 4WD, Basket Man Lift; 1999 Lull International Truck and Tymco Sweeper; Mauldin 644B-42 Lift; Gradall 534 C 4WD Telescopic Lift; Steel Wheel Roller; 1989 Ford F-350 Truck with Genie 40-49 4WD Platform Boom Lift; 1996 JLG bucket lift; 1988 Ford L-8000 Diesel Sewer Truck; 4 WD Mack Tandem Axle Dump Truck; 1993 Mack Flat Utility Tractors: 2003 New Holland TC 30; Bed; 1997 Ford F-Series Dump Truck; Caterpillar Kubota L2900; Kubota L3010; Ford 1720 D3B Dozer; 1990 International Bucket Truck; Asphalt Utility Trailers: 1994 DC Utility; 1996 Michell; Leeboy Paver / Model # L1000T; Caterpillar D6M 1996 Shop Built 7’ x16; 2001 Enclosed, 7’ x 18’; Dozer 1989 Pace 6’ x10’ Enclosed; 1998 McGraws 7’ x 16’; DRUG SEIZURE ITEMS!! 6 vehicles from Drug 1999 Pipe 7’ x 16’ Flat; (2) 2003 C & W Enclosed, 6’ Seizure; Search and Rescue Boat- Steel Hull Inboard x 16’; 1996 Utility 53’ Van Trailer; 1996 Great Dane Bank Equipment (ABSOLUTE): CASE MX 210 53’ Van Trailer; Strick 53’ Van Trailer MFWD with Creeper Gear; CASE 450 CT Skid Steer; Job Office Trailers: (2) Single Axle Job Site 1985 Ford LT9 Dump Truck; 1986 Pintle Hitch Storage / Office; 1991 G & S Modular Office Building Lowboy Trailer; 1986 Caterpillar D3B Dozer; 2001 / Portable; 1991 G & S 8’ x 32’ Office Complex; Case 850 G Dozer 10% BUYERS PREMIUM

TAYLOR AUCTION & REALTY, INC. BENNY & RUTHIE TAYLOR • MS Lic. #176 15488 Hwy. 51 North Grenada, MS 38901 - 1.662.226.2080 OR 1.662.417.0397

Page 88 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ritchie Bros. Holds Multi-Million Dollar Sale in Atlanta Making the trek to Atlanta specifically to inspect and bid on a Cat 939C model crawler loader is Duncan Kelly, Plantation Farms, Carthage, N.C.

ore than 1,400 bidders participated online and in person at Ritchie Bros. Auctioneers’ multi-million dollar unreserved public equipment auction in Atlanta on Sept. 20. Bidders came from 48 countries, including 45 U.S. states. Close to 80 percent of the equipment was sold to out-of-state buyers, from as far away as Australia, Colombia and Indonesia. Online bidders purchased close to 38 percent of the equipment sold (by dollar value). In total, more than 1,000 equipment lots were sold in the auction, Doing a final Komatsu dozer test before including loader backhoes, hydraulic excavators, crawler tractors, heading to the theater area is Tim Thomas, multi-terrain loaders, wheel loaders, articulated dump trucks, truck Tractor & Equipment Co., Birmingham, Ala. tractors and more.

A hint of things to come. Perry Taggart (L), C.A. Murren Contractors & Engineers, Grayson, Ga., and his Ritchie Bros. representative Alex Wood stand in front of a nice package of C.A. Murren machines, including a Manitowoc 555, which will go on the auction block in Newnan, Ga., in November.

Taking a good look at the power plant of a Cat 375L is Luke Copeland, Cope Equipment, Jasper, Ga.. Thompson Tractor representatives from Montgomery and Birmingham, Ala., Jason Garrison (L) and his son, Dakota, and Billy Seals were out in full force to monitor the auction pricing at the Ritchie Bros. Atlanta area sale.

Deep in discussion about an Etnyre distributor in the sale lineup are Steve Meissen (L), Reynolds-Warren Equipment Company, Lake City, Ga., and Spencer McCroskey, Sunbelt Asphalt, Atlanta.

Testing a Komatsu PC138 US excavator is Scott McEver, H&R Construction Parts, Lawrenceville, Ga.

The ringmen at the ramp make quick work of selling a package of five Komatsu WB 140 backhoes.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 89

BusinessCalendar

DELAWARE CONTRACTORS ASSOCIATION EVENTS: WEDNESDAY, OCTOBER 24, 2012 – Delaware Contractors Association’s 43rd Annual Meeting. This premier event of the Association’s calendar year is again being held at the Chase Center on the Riverfront and Guest Speaker will be Mike Schmidt. Cocktails: 5:00 PM (open bar & hors d’oeuvres); Dinner: 6:00 PM. Reservations are $125.00 per person for the entire evening. No cancellations will be accepted after 12:00 Noon on Wednesday, October 17, 2012. Michael Jack Schmidt is a Hall of Fame third baseman, and is widely considered as one of the greatest at that position in the history of Major League Baseball. He played his entire career for the Philadelphia Phillies and was the National League MVP in 1980, 1981 and 1986. If you are interested in becoming a sponsor of this event which entitles you to attend a private cocktail reception with Mike, and to register for this event, please contact Marla DiSalvo at Delaware Contractors Association, P. O. Box 6520, Wilmington, DE. Telephone: 302/994-7442, Fax: 302/994-8185, or Email Marla at mdisalvo@e-dca.org. Minnesota Nursery & Landscape Association (MNLA) – Successful Business Grow Here! 2012 EVENTS CALENDAR: Wednesday, October 3rd - ISA CERTIFIED ARBORIST, UTILITY SPECIALIST, and MUNICIPAL SPECIALIST EXAM (12:00 PM EST – 5:00 PM EST) Wednesday, October 10th - OPEN HOUSE DAYS AT THE MINNESOTA LANDSCAPE ARBORETUM GRASS COLLECTION (1:00 PM CST – 6:00 PM CST) October 24th thru October 26th – GIE & EXPO 2012 October 24th thru October 26th – 2012 HARDSCAPE NORTH AMERICA November 2th thru November 6th – 2012 IRRIGATION SHOW & EDUCATION CONFERENCE November 8th thru November 10th – TCI EXPO 2012 in BALTIMORE November 16th – 9:00 AM CST – 3:30 PM CST –PESTICIDE RECERTIFICATION January 8, 2013 – 8:00 AM CST – 5:00 PM CST – SUPER TUESDAY: PERMEABLE PAVER SYSTEMS CERTIFICATE COURSE January 8, 2013 – 8:00 AM CST – 5:00 PM CST – SUPER TUESDAY: LANDSCAPE IRRIGATION TROUBLESHOOTING (PLT RELICENSURE) ***Please contact MNLA at mnla@mnla.biz or call toll free: 888-8866652 for more information. AGC of AMERICA is pleased to offer a wide variety of meetings, events and seminars for construction professionals that can help you improve every aspect of your business. AGC of MINNESOTA

AGC of MINNESOTA 525 Park Street, #110, St. Paul, MN 55103-2186 Telephone: 651/632-8929 or 800/552-7670 Fax: 651/632-8929

Email: info@agcmn.org Website: www.agcmn.org

at St. Louis Skeet and Trap Club. For Early Bird Sponsorship Specials, sign up to be a sponsor by Friday, September 28th, 2012 to get the early bird special. This event raises money for the AGC of St. Louis’ Political Action Committee, which in turn enables the AGC to strengthen the legislative voice of the industry. AGC ST. LOUIS – if you have any questions regarding the above AGC events, you may call Nancy Valentine at the AGC office at 314/4803173 or email: nvalentine@agcstl.org. Completed registration forms and/or information pertinent to the above events, you may contact Donna Pigg at the AGC of St. Louis office at 314/781-2874.

PLAN TO ATTEND: UNIVERSITY OF MINNESOTA, 2012 CONSTRUCTION EXPO Thursday – October 4, 2012, 9:00 AM to 3:00 PM, University of Minnesota, Coffman Memorial Union, Great hall, 300 Washington Avenue S.E., Minneapolis, MN 55455-0110 Exhibit Booths . Networking . Awards Incentive & Recognition (AIR) Luncheon. For more information or to register visit: bced.umn.edu. Or, you may call Denise Woods, CMP, AGC of MN direct at 651/796-2186 or toll Website: free: 800/552-7670. Email: info@agcmn.org. Georgia Utility Contractors Association, Inc. www.agcmn.org. 2012 3rd Quarter Safety Training Schedule th October 16 – FALL MEMBER MEETING. The fall member meeting will be Topics Include: held October 16 at the Embassy Suites Minneapolis Airport. The program . Competent Person Excavation will feature Jim Schug of FMI Corporation. Jim will present case studies of . Confined Space Entry Program successful contractors and analyze how companies both small and large . Damage Prevention/GUFPA Law/PSC can remain successful in the current economy. The results of the 2012 – . ISEE Blasting Certification 2013 Construction Industry Assessment Survey will also be released. . Temporary Utility Workzone Traffic Control . NPDES Level 1A Course and Exam* Build America Award Application Available . NPDES Level 1A Recertification Course* The 2013 AGC/Alliant Build America competition is open to general contrac- . NPDES Level 1B Course and Exam* tors and specialty contractors who are current members of an AGC chapter . GDOT Approved Flagging Program working as prime contractors for projects completed between November 1, . GDOT Approved Flagging Instructor Program 2011 and November 1, 2012. Member companies can visit http://awards.agc.org/ to begin a project entry. (Please note that this is a *No Checks accepted less than 5 days prior to class date payment reserves newly developed site and will be continually updated throughout the duration the seat for class – we do not save seats. For more information on the above of the awards season. Thank you in advance for your patience and cooper- classes which include dates/locations/costs, please contact Scott ation.) The final deadline for all submissions is Friday, November 2, at 5:00 Brumbelow, Assistant Executive Director, GUCA, 404/362-9995. pm EST. Winners will be announced at AGC’s 94th Annual Convention in Palm Springs, California next March. GUCA 804 Main Street, Suite C, Forest Park, GA 30297 *** For more information on the above AGC of Minnesota events, you 404/362-9995, 877/SAF-GUCA, Fax: 404/362-9211 may contact Denise Woods,CMP; Director, Communications & Events, www.guca.com Associates General Contractors of Minnesota, 525 Park Street, #110, St. Paul, MN 55103 DIRECT: 651/796-2186; CELL: 612/201-5501; FAX: HOFFMAN EQUIPMENT, Piscataway, NJ – NCCCO Class Schedule – NCCCO Mobile Crane Certification Dates Available 651/632-8928; TOLL FREE: 800/552-7670 and/or www.agcmn.org. Written Exam Prep (must pre-register August 20 - 24 Thursday, October 4, 2012 – Bridge Project. Mississippi River Bridge At least 2 weeks prior to class) October 15 – 19 Project located at DoubleTree Hotel St. Louis at Westport, 1973 Craigshire, Mobile Crane Practical Exam Practice Call To Schedule St. Louis, MO 63146. Must Schedule You will want to hear Tom Tavernaro, Project Engineer for the Massman, NCCCO Mobile Crane Certification Call To Schedule Traylor, Alberici joint venture provide an overview of the construction work Practical Exam – Must Schedule of the Main Span portion of the bridge project. Tom will review the con- For More Information or to Register, Call Nancy DeCarr struction activities which took place in 2010 and 2011 and discuss the 800-4-HOFFMAN upcoming construction activities this year. www.hoffmanequip.com Cost: $55.00; Cocktails: 5:30 PM; Dinner: 6:30 PM; Presentation: 7:30 New Jersey Corporate Headquarters Hoffman Equipment PM The dinner entrée will be grilled chicken breast. A two hour bar is included 300 South Randolphville Road • Piscataway, NJ 08854 in the cost of the dinner. If you have special dietary needs, please advise. Any reservation not canceled prior to Monday, October 1, 2012 at 5:00 2012 FLORIDA Contractor Associations Meetings Postings: PM will be billed. New Installations: Wednesday, October 10th and Tuesday, December 4th Friday, October 19, 2012 – Tournament. Fall Sporting Clays Tournament

NASTT’s mission is to advance trenchless technology and to promote its benefits for the public and the environment by increasing awareness and knowledge through information dissemination; research and development; education and training; and partnerships with organizations and agencies interested in trenchless technology and its benefits. NASTT provides a representative voice for all sectors of the trenchless technology industry. For more information about NASTT and the variety of training opportunities provided, please visit www.nastt.org or contact Michelle Hill, Communications & Training Manager at 440/638-4676 or mhill@nastt.org. MNSW – ROAD – INST – SCHED ROAD INSTITUTE 2012 – 2013 Schedule Announced!!! Road Institute R will soon begin its 48th year as the asphalt paving industry’s premier training school, providing practical instruction for industry professionals. Volvo Construction Equipment has announced the 2012 – 2013 schedule for the Road Institute. The course curriculum offers two- to five-day sessions that begin in October and continue through May 2013, with classes held at two training facilities in North America – one in Chambersburg, PA and the other in Phoenix, AZ. “The Volvo commitment to training includes offering this program as a service to the industry and providing others the opportunity to learn best practices in a controlled environment with a focus of instruction and training dedicated to asphalt paving,” said Wade Turlington, Director of Product and Sales Education. “The Road Institute is dedicated to providing quality instruction to industry professionals, even if they don’t own or operate Volvo equipment.” 2012 – 2013 Road Institute Course SCHEDULE includes topics such as: . Automatic Grade and Slope Systems . Large Asphalt Compactor Mechanics (Step 1) . Large Asphalt Compactor Mechanics (Step 2) . MT2000 Hydraulic and Electrical Systems (Step 1) . MT2000 Hydraulic and Electrical Systems (Step 2) . MW500 Hydraulic and Electrical Systems (Step 1) . Paver and Compactor Operation and Maintenance . Paver and Compactor Operation and Maintenance, warm-mix asphalt (WMA) . Paver Hydraulic and Electrical Systems – PF6000 – Series Pavers (Step 1) . Paver Hydraulic and Electrical Systems – PF6000 – Series Pavers (Step 2) . Paver Hydraulic and Electrical Systems – Blaw-Knox R Pavers (Step 1) . Paver Screed Operation and Adjustment . Paving and Compaction Application Seminar . Small Asphalt Compactor Mechanics (Steps 1 and 2) . Soil Compaction Application Seminar . Soil Compactor Mechanics (Step 1) . Soil Compactor Mechanics (Step 2) Class size is limited for ideal instructor-to-student ratios and team learning. Tuition is $750 (USD) per student per three to five day course or $500 (USD) per student per two day seminar. For more information on the Road Institute or to register for classes, visit roadinstitute.com or call 866/497-4501 or email: roadinstitute@volvo.com.

Page 90 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Volvo CE Wins AEM Gold for ‘I Make America’ Campaign As the London 2012 Olympic games came to a close, America was celebrating after finishing top of the medal table — winning more gold medals than any other country in the world. Volvo Construction Equipment (Volvo CE) joined America’s gold-winning streak — awarded “gold status” by The Association of Equipment Manufacturers (AEM) for its participation in the I Make America campaign. The campaign hopes to dramatically improve American manufacturing policies to create more jobs in the United States and keep its economy competitive with other countries. The Association of Equipment Manufacturers (AEM), with more than 850 member companies, announced that Volvo CE joins the elite ranks of the I Make America campaign’s gold-level company supporters. Volvo CE has shown continuous year-on-year dedication to this cause, expanding its sites, factories and work force

White House that our economy is in urgent need of a new manufacturing policy that will generate jobs.”

Goran Lindgren (L), Volvo CE president of sales region Americas, and Andy Knight, head of Volvo CE operations in the Americas, break ground on the Shippensburg, Pa., expansion.

Technicians and engineers work hard to produce excellent machinery on site.

There Is No Stopping Volvo Volvo CE has shown its dedication to the long-term development of the U.S. construction industry following its $100 million investment in its manufacturing facilities in Shippensburg, Pa., which will bring more jobs and local manufacturing of core products to one of Volvo CE’s home markets. Volvo CE is creating a modern customer and demonstration center in Shippensburg, as well as an Americas Headquarters facility on its current campus, further demonstrating its commitment to the North American market. “We all want the best for America,” said Bill Law, Volvo CE vice president of corporate communication for the Americas region. “Initiatives such as I Make America are excellent ways to focus everyone’s attention on using the muscle of the construction industry to get the giant wheel of the U.S. economy spinning at top speed again.” I Make America gold-level supporters are an important group of companies. Many of the companies are industry leaders that have reached out to the state or local and federal legislators. The campaign has enlisted the support of more than 21,000 people nationwide so far, including industry organizations. AEM membership comprises more than 200 product lines in the agriculture, construction, forestry, mining and utility sectors worldwide. Volvo has been involved with the I Make America campaign from the very beginning and has given I Make America presentations to its employees in their manufacturing facilities and sales organization. “Our workforce is aware that, through properly thoughtout legislation and well-funded infrastructure development, so many jobs and wealth have been created in recent decades,” adds Law. “They are keen to support initiatives and legislation that will continue to create jobs.”

in order to grow the industry. Last year, Volvo CE achieved silver status for its participation in the grassroots campaign, first launched in September 2010. Since the campaign’s inception, Volvo CE has been heavily involved as a dedicated partner contributing to its overall success. By asking state legislators and members of Congress to pass new job development policies through ambitious construction projects and the restoration of the U.S.’s aging infrastructure, the company hopes it can make a difference. “We commend Volvo CE for achieving Gold status in the I Make America campaign,” said Dennis Slater, president of AEM. “As a member of AEM, Volvo CE exemplifies the commitment we need from all manufacturers around the country to send the message to Congress and the Volvo CE is investing $100 million to grow its manufacturing facilities in North America.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 91

Page 92 â&#x20AC;¢ October 3, 2012 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

MYRON BOWLING Complete Liquidation

!-%2)#!.Ã¥0!6).'Ã¥#/20 Ã¥/LDÃ¥%DENÃ¥2OADÃ¥INÃ¥%DEN Ã¥-ARYLANDÃ¥ (approx. 120 miles southeast of Baltimore) th

THURSDAY, OCTOBER 18 at 10AM Inspection: Day Prior from 9AM - 4PM

!30(!,4Ã¥0!6).'Ã¥#/-0!.9 Large Late Model CAT & KOMATSU Construction Equipment B L AW K N OX ! S P H A L T 0A V E R S ! S . E W ! S p !SPHALT $ISTRIBUTOR 4RUCKS p 6IBRATORY #OMPACTORS !S .EW !S p MACK 4RI !XLE $AY #AB 4RUCK 4RACTORS p MACK Tri-Axle Dump Trucks - As New !S p /VER 0ICKUP 4RUCKS 6EHICLES !S .EW !S p 4RAILERS !S .EW !S p &ARM 4RACTORS p %XCAVATORS p #RAWLER 4RACTORS p 7HEEL ,OADERS p "ACKHOE ,OADERS p 3KID 3TEER ,OADERS p -OTOR 'RADER p 3CRAPER 4RACTOR p 3PREADERS p #OMPRESSORS -OREÃ&#x2DC; T E R M S : # A S H C O M P A NY C H E CK O R W I R E T RA N S FE R " U YE R S 0REMIUM /NSITE /NLINE ADDITIONAL CAP PER ITEM &ORÃ¥ADDITIONALÃ¥INFORMATION Ã¥VISITÃ¥WWW MYRONBOWLING COM

-YRONÃ¥"OWLING !UCTIONEERSÃ¥)NC Ã¥

WWW MYRONBOWLING COM

To bid online,register at: www.lyonauctionlive.com

(315) 633-2944 Â&#x2021; www.lyonauction.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 93

N.C. Contractors Enjoy Dual Customer Appreciation Day SKEET from page 62

RENTAL RETURN AUCTION LARGE AUCTION OF RENTAL RETURNS:

CONSTRUCTION EQUIPMENT, SUPPORT, ATTACHMENTS, AERIALS & FORKLIFTS. NEFF RENTALS HERTZ EQUIPMENT RENTALS

AUCTION

KISSIMMEE, (WINTER GARDEN)

FLORIDA NOTE: Selling will be a large amount of rental fleet equipment from several national rental fleets. HILITES: 5 ARTICULATED HAUL TRUCKS: 2007-2006 Volvo A40D, 2005 Volvo A35D, (2) 2007 Terex TA30, 17 HYDRAULIC EXCAVATORS: Unused Cat 320EL, 2003 Cat 305SR, 2006 Volvo EC700B, 2007-2005 EC240CL, Volvo ECR88, (2) 2006 Kobelco Sk350LC-6, 2005 - 2004 Kobelco SK250LC, (2) 2006-(2) 2005 Kobelco SK135SR, Kobelco SK115DZ-IV, IHI 35N, (4) 2005 IHI 28N-2, IR ZX75, 2 LONG REACH EXCAVATORS: Unused 2012 Doosan DX225LC, 2005 Cat 322CLR, 2 MOTOR GRADERS: JD 772, JD 770A, 9 RUBBER TIRED LOADERS: 2009-2008 Volvo L110F, (2) 2005 Case 621D, 2005 Komatsu WA250, 2008 Cat 962H (grapple), Cat 938G (log fork), Cat 920, JD 544J, TOOL CARRIER: Cat IT38G, 8 CRAWLER TRACTORS: Cat D8R, Cat D8N, 2003 Cat D6NLGP, 2006-(2) 2005 JD 650J, 2006-2005 JD 450JLGP, 10 TRACTOR LOADER BACKHOES: 2011 Case 590 Super N (4x4), 2006(3) 2005 Case 580M (4x4), 2007-2006 JCB 214 (4x4), 2005 NH LB75B (4x4), JD 310, 2007 Allmand TLB425, ASPHALT PAVERS: 2008 IR PF6170, 5 ASPHALT ROLLERS: IR SD122DX, 2003 IR DD130, (2) Bomag BW75AD, 2004 Multiquip MRH800DS, 14 VIBRATORY ROLLERS: (2) 2007 Cat CP563E, (3) 2007-2006 Dynapac CA250D (cab), 2006 IR SD100D, (3) 2004 IR SD70D, (2) 2004 IR SD45D, 2006 Hamm 3205, 2006 Bomag BW211-3, 19 RUBBER TRACKED SKID STEERS: 2007-2006 Bobcat T300, (2) 2007- (9) 2006 Bobcat T190, 2005 JD CT322, (2) 2006 Takeuchi TL130, 2009-(2) 2007 Komatsu CK35, 10 SKID STEERS: 2008 Case 465, 2006 Bobcat S220, (4) 2006 Bobcat S175, (3) 2005 JD 317, Gehl 4835, 2 TRENCHERS: 2004 Ditch Witch 1330, Ditch Witch 1030H, FELLER BUNCHERS: Hydro-Ax 321, 4 TELESCOPIC FORKLIFTS: 2005-2004 JLG G9-43A, 2005 IR VR843C, 2006 JCB 508C, 4 PIGGY BACK FORKLIFTS: (4) Moffett M5000, 4 BOOM LIFTS: 2004 JLG 800S (4x4), (2) 2004 Genie Z45/25RT, 2005 Snorkel UNO41G, 15 SCISSOR LIFTS: (6) 2003 Genie AWP-30S, 2005 Genie GS2632, (4) 2003 Genie GS1930, (2) Genie GS1930, Skyjack 4626, 7 AIR COMPRESSORS: (2) 2006 Sullair 185DPQJD, Sullair 185DPQJD, 2005-2003 IR P185WJD, 2004 Airman PDS185S, Airman PDS185S, 5 GENERATORS: (2) Demo Cat 500kw, 2006 Multiquip DCA70USIC, (2) 2006 Multiquip DCA25USI, 15 WELDERS: (2) 2007 –(2) 2006-(3) 2005 Miller Big Blue 400D, 2006 Miller BB400D, 2006 Miller Big 40, 2008 Multiquip DLW40ES, (2) 2006-2004 Multiquip BLW400SS, 2006 Lincoln Vantage 300, 6 LIGHT PLANTS: (2) 2006 Magnum Pro MLT3060, (3) 2004 Magnum MLT3060, Magnum MLT3060, 2 WATER PUMPS: 2006-2003 Pioneer PP66S12L, 4 SWEEPERS: 2010 -2009 Broce KR350 (cab), (2) 2004 Terramite TSS38, DIGGER DERRICK TRUCKS: 1982 Int’l. S1800 AWD (s/a), DUMP TRUCKS: 1996 Mack RD690S (tri.), BOOM TRUCKS: 1999 Int’l. 4700 15T (s/a), FLATBED TRUCK: 2005 Freightliner Cab Over (tri.), 3 TRUCK TRACTORS: 2005 Peterbilt 378 (t/a), 2005 Kenworth 900 (t/a), 2004 Volvo 4NL430 (t/a), 2 WATER TANKERS: Cat 769C, Cat 613C, SERVICE TRUCK: 2006 Ford F350XL 9 PICKUPS: 2005 Ford F250 (4x4), 2005 Ford F250, 2000 Ford F150XLT, 2006-2003-2002-2001 Ford F150, 2008 Dodge Ram 1500, 2003 Chevy Silverado 1500 Z71, SUPPORT EQUIPMENT: Folding Ramps, Huskie Hammer Drill, New Impact Wrenches, New Abrasive Blades, New Submersible Pumps, New Platform Scales, New Stiff Neck Pintle Hitches, New Air Spray Gun Kits, New Diamond Blades, New Concrete Vibrators, New Plate Compactors, New Demo/ Cutoff Saws.

Tom Sullivan, Sullivan Eastern, Durham, N.C., tested this John Deere 672GP motorgrader.

Address: 12601 State Rd. 545 North (Avalon Rd.), Winter Garden, FL 34787.

Blaine Reese (L) and Joey Ross, both of J&J Logging, Henderson, N.C., look forward to the annual event.

Mark Barnes, Benchmark Tool & Supply, sets up the Sokkia Robotic Total Station. The machine is used for surveying and setting the stakes.

DIRECTIONS: From Tampa: I-4E to Rte. 27N for 6.5 miles to Rt. 192E for 1 mile. Left on Avalon Rd. for 3 miles to sale site on left. From Orlando:I-4W to Rt. 192W for 5.5 miles, turn right on Avalon Rd. to sale site. FLORIDA AUCTIONEER LICENSE: #AU 0001548, FLORIDA LICENSE: #AB-1091. SALE SITE PHONE: (407) 239-2700, (770) 537-7386, FAX: (407) 239-0068.

WED., OCT. 24 @ 9:00 AM

ALEX

LYON

& SON Sales Managers & Auctioneers, Inc.

(L-R): Jimmy Cole and George Marsh, both of Gelder & Associates, Raleigh, N.C., thank Dan Moore for his hospitality.

www.lyonauction.com corporate offices: Bridgeport, NY Phone: (315) 633-2944 • Fax: (315) 633-5635 www.lyonauctionlive.com

Page 94 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ADVANCE TIRE ..........................................................................50 ALEX LYON & SON INC KISSIMMEE FL....................................................................93 ANACONDA CONVEYORS USA INC ........................................25 ASC CONSTRUCTION EQUIPMENT USA ............................3,38 BAIR PRODUCTS INC ................................................................56 BARGAINS ..................................................................................80 BENCH MARK TOOL & SUPPLY ..................................................7 BID SPOTTER ............................................................................89 BOBCAT COMPANY ....................................................................48 BOMAG ........................................................................................73 BROOKS SALES INC ....................................................................6 CASE CONSTRUCTION ........................................................44,45 CAT AUCTION SERVICES ..........................................................85 CEG SCALE MODELS ................................................................40 CHICAGO PNEUMATIC ..............................................................24 CLASSIFIEDS ..............................................................................80 CLEVELAND BROTHERS EQUIPMENT CO ........................17-19 COMPANY WRENCH ..................................................................27 CONSTRUCTION EQUIPMENT GUIDE WANTED ............................................................................81 CRAWLER LOADER PROMO ............................................42 AUCTION RESULTS ..........................................................91 ONE BUY NATIONAL COVERAGE ....................................36 DOMINION EQUIPMENT PARTS................................................77 DYNAPAC ....................................................................................64 FLANGE LOCK ............................................................................30 FLUID CONTROL SERVICES ....................................................14 G S EQUIPMENT ..........................................................................2 GEHL............................................................................................56 GOMACO CORP ........................................................................65 H & L TOOTH CO ........................................................................29 HALE TRAILER BRAKE & WHEEL ............................................21 HILLS MACHINERY COMPANY..................................................96 HITACHI CONSTRUCTION MACHINERY..............................78,79 HYDREMA U S INC ....................................................................15 HYUNDAI CONSTRUCTION EQUIPMENT ................................41 IRON PLANET ............................................................................83 JCB INC ..................................................................................52,53 JFW EQUIPMENT INC ................................................................66 JOHN DEERE ..............................................................................57 JOHN DEERE SKID STEER ......................................................95 K I T EQUIPMENT ......................................................................22

KAWASAKI ..................................................................................51 KOBELCO ..............................................................................46,47 KOMATSU AMERICA CORP ............................................37,54,55 KUBOTA SVL ..........................................................................58,59 LEEBOY ..................................................................................68,69 LIEBHERR CONSTRUCTION EQUIPMENT ................................9 LIUGONG ....................................................................................33 M D MOODY & SONS INC ..........................................................13 MACKINNON EQUIPMENT & SERVICE ....................................10 MAULDIN PAVING PRODUCTS..................................................75 MAY HEAVY EQUIPMENT ..........................................................22 MINNICH MANUFACTURING ....................................................66 MOTLEY'S AUCTION & REALTY GROUP RICHMOND VA ..................................................................87 MYRON BOWLING AUCTIONEERS EDEN MD ............................................................................92 NPK CONSTRUCTION EQUIPMENT INC ..................................35 PINNACLE CENTRAL CO ..........................................................22 PROFESSIONAL SHORING & SUPPLY ......................................6 RING POWER CRANE ................................................................10 RING POWER RENTAL ................................................................5 ROAD BUILDERS MACHINERY ................................................24 ROSCO MFG CO ........................................................................67 RUBBERTRAX INC......................................................................50 SAKAI AMERICA INC ..................................................................71 SANY AMERICA INC ..................................................................27 SITECH MID-ATLANTIC ..............................................................23 SNEAD AG SUPPLY & SERVICES ............................................11 SOLESBEES EQUIP & ATTACHMENTS ....................................14 STONE CONSTRUCTION EQUIPMENT ....................................70 TAKEUCHI ..................................................................................61 TAYLOR AUCTION & REALTY GRENADA MS ....................................................................87 TEREX COMPACT ......................................................................70 TOKU AMERICA INC ..................................................................20 TRENCH SHORING SERVICES ................................................31 VOLVO COMPACTION ................................................................72 VOLVO CONSTRUCTION EQUIPMENT ....................................39 WHITE OAK EQUIPMENT INC ....................................................6 WILSON FINLEY ........................................................................76 WIRTGEN AMERICA ..................................................................74 YANMAR AMERICA ....................................................................60

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 95

The Difference is in the D-tails. You asked. We delivered. Our D-Series Skid Steers are loaded with customer-recommended enhancements, like larger operator stations, quiet pressurized cabs with best-in-class visibility, and curved-glass swing-out doors. D-Series innovations include an exclusive cooling system with available hydraulically driven variable-speed fan that reverses to clear core-clogging buildup. Plus options such as electrohydraulic joysticks, variable boom and bucket speed settings, and more than 100 attachments to let you take on more tasks. Packed full of best-in-class productivity and uptime-enhancing features, the D-Series are destined to become owner and operator favorites. Ask for a demo today.

www.johndeere.com

CONTACT YOUR LOCAL JOHN DEERE SKID STEER LOADER DEALER JAMES RIVER EQUIPMENT Ashland, VA 23005 804/358-6776 Burkeville, VA 23922 434/767-5578 Fishersville, VA 540/337-3057 Richland, VA 276/596-9440 Asheboro, NC 27203 336/625-2212 Charlotte, NC 704/597-0211 Greensboro, NC 336/668-2762

KS1CUFFOO34N-00268028

Matthews, NC 28104 704/821-7399 Mt. Airy, NC 336/352-2240 Mt. Gilead, NC 910/439-5653 Salisbury, NC 28144 704/636-2671 Wilkesboro, NC 28697 336/973-8201 800/422-4193 Rock Hill, SC 29730 803/325-1555 866/277-8119

FLINT EQUIPMENT COMPANY 1206 Blaylock St, P.O. Box 3329 Albany, GA 31706 229/888-1212 Fax: 229/435-3612 Cuthbert GA 229/732-2631 Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Perry, FL 850/584-9200 Tallahassee, FL 850/575-5600 West Columbia, SC 29169 803/794-9340

Aynor, SC 29511 843/358-5688 Atlanta, GA 30336 404/691-9445 Braselton, GA 30517 770/965-1889 Adairsville, GA 30103 770/773-9857 Savannah, GA 912/964-7370 Brunswick, GA 912/264-6161 Ladson, SC 843/572-0400 Walterboro, SC 843/539-1420

R.W. MOORE EQUIPMENT CO.

COASTAL EQUIPMENT CORP.

www.rwmoore.com Ahoskie, NC 252/332-5550 New Bern, NC 252/638-5838 Greenville, NC 252/758-4403 Castle Hayne, NC 910/675-9211

www.coastalequipment.net 504 South Military Hwy Virginia Beach, VA 23464 757/424-1900 Yorktown, VA 23692 757/898-1900

Page 96 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

TTier ier 3 Hurry! They will go fast Q Low rate financing and no down wn payment p Q No reasonable offer will be turned ned down Q

Case TV380 Compact act TTrack rack Loader

Case TR320 Compactt TTrack rack Loader

Case TR270 Compact TTrack rack Loader

#NBM441014

#NCM440404

#NBM438910, #NBM439021

Case SR220 Skid Steer Loader

Case SR250 Skid Steer Loader

Case 586G Rough Terrain Terrain erra Forklift

#NBM432151, #NBM432155

#NBM434360

#NBC548477

Call Today! Today! o www.hillsmachinery.com

North Carolina

South Carolina

Greenville 315 Easy Street Greenville, NC 27834 877-549-3232 Phone: 252-752-7145 Fax: 252-758-4163

Columbia 1014 Atlas Way Columbia, SC 29209 888-830-5939 Phone: 803-658-0200 Fax: 803-233-4482

Charleston 7168B Cross County Road North Charleston, SC 29418 866-830-7577 Phone: 843-225-9377 Fax: 843-225-9378

*Subject to crredit edit apprroval oval