West#16,2012 by Construction Equipment Guide

$3.00

Published Nationally ®

Western Edition

“The Nation’s Best Read Construction Newspaper… Founded 1957.” August 11, 2012 • Vol. VIII • No. 16 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com

Inside

Age Turns Bridgetown Into Bridge-Repair Town By Dana Tims THE OREGONIAN

Road Connection Pays Visit to AEM...32

Kirby-Smith Receives Honor...32

PORTLAND, Ore. (AP) Multnomah County commuters can be forgiven if they are suffering from a lingering case of bridge-repair fatigue. Needed repairs closed the Morrison Bridge for nearly a year recently, and streetcar work shut the Broadway Bridge before that. Construction of a new Sellwood Bridge, meanwhile, is slowing what was already a sloggy commute across the busiest two-lane bridge in the state. Well, for anyone thinking their daily game of bridge bingo is about over, there’s bad news.

expected in the spring, will break the work into phases to be tackled in the coming decade. Then, in 2014, crews will replace lift-span parts on both the Broadway and Morrison bridges. There’s more. The roughly 30 percent of the Broadway Bridge not painted eight years ago is scheduled for that work in 2015. And assuming nothing else breaks or simply wears out on other county-owned spans, engineers have identified seismic retrofits to the Broadway, Burnside, Morrison and Hawthorne bridges. Deborah Kafoury, the county commissioner

The Sellwood Bridge is set to be replaced.

“The four oldest bridges are all about 100 years old,” said county spokesman Mike Pullen. “People need to expect there will be ongoing work on all of those structures for years to come.” First up is an end-to-end analysis of the 86year-old Burnside Bridge. A consultant’s report,

see BRIDGES page 56

Men Over Manhattan Crane inspector Tim Barry (top right) and his crew look for lightning damage on a crane located at the 1 World Trade Center site. The CAN USA inspection team spends its days tethered to cranes situated hundreds of feet above the ground. This day, Barry and company inspected a crane 93 stories — about 1,200 ft. — above the ground.

Hawthorne CAT Joins NorAm Network...33

AP Photo/Joe Woolhead

Table of Contents ............4 Backhoes & Attachments Section ......................15-27 California Section ....33-35 Paving Section ........42-49 Auction Section ......52-57 Business Calendar ........54 Advertisers Index ..........58

AGC Releases Employment Data for Last Year Construction employment increased in just half the states plus the District of Columbia from June 2011 to June 2012, but declined in a slim majority of states in the past month, according to an analysis of Labor Department data by the Associated General Contractors of America. “The latest state data show again how fragile

and fragmentary the construction recovery is,” said Ken Simonson, the association’s chief economist. “Although private sector demand for structures has risen in most states, improvement in single-family homebuilding is spotty and public investment is shrinking.” Simonson noted that 25 states and D.C. added

construction jobs between June 2011 and June 2012, while construction employment fell in 25 states. D.C. added the highest percentage of new construction jobs for the year (17.8 percent, 2,100 jobs), followed by North Dakota (16.2 percent, 3,800 jobs) and Montana (14.6 percent, see AGC page 57

Page 2 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Lafayette (Corporate) 3135 US Hwy 90 East • Broussard, Louisiana 70518 (337) 837-6693 • Fax (337) 837-3146 Houston 13727 I-10 East • Baytown, Texas 77520 (281) 385-6633 • Fax (281) 385-7106 Lake Charles 4851 East Napoleon Road • Sulphur, Louisiana 70663 (337) 625-5942 • Fax (337) 625-5602

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 11, 2012 • Page 3

2006 Cat D6R XL, Stk# 8123, EROPS, A/C, Sweeps, Rear & Side Screens, St/Tilt Blade, 3279 Hrs, Ripper, 24” Pads, 10’7” Height, 10’8” Blade ..................................................$129,500

"In Business for over 30 Years" www.hendrixmachineryllc.com 1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla 2005 Magnum MLT4060MMH, Stk# 7679, 161 Español Hrs, 3 Cyl. Mitsubishi Diesel Eng, 175 / 80D 13

Tires ........................................................$3,850

1998 Komatsu WA120-1L, Stk# 8110, OROPS, 2164 Hrs, 92” Bucket, 10’3” Height w/o Exhaust Pipe, 4 Cyl. Komatsu Eng., L-3.17.5x25 Tires .... ..............................................................$21,500

2007 Cat D6T LGP, Stk# 7990, EROPS, A/C, St/Tilt 2004 Ditch Witch RT40, Stk# 8050, OROPS, 1156 Hrs, 4-Way Blade, Sliding Boom, 26x12x12 Blade, 80% U/C, 7,892 hrs., 36" Pads, 10'7" From Tires, 64” Wide......................................$13,500 Track to Track, 13' 4" Blade, 11’ Height ..$169,500

1999 Cat D4C III, Stk# 8129, OROPS, 6 Way Blade, 5,533 hrs., 90% U/C, 18" Pads, 6 Cyl. Cat Eng., 9' 3" Height, 8' 8" Blade ................$22,500

2007 Cat D6R III LGP, Stk# HR-62, EROPS, A/C, Sweeps, Rear Screen, St/Tilt Blade, 6500 Hrs., 50% U/C, 36” Pads, 13’3” Blade..........$125,000

1999 John Deere 310E, Stk# 8109, OROPS, 2WD, 3592 hrs., 12" Bucket, Aux. Hyd., 2 Stick Controls, 19.5Lx24 Rear Tires, 11Lx16 Front Tires .......................................................$18,500

Ingersoll Rand SD100, Stk# 7999, OROPS, 84” 2005 Cat D6R II LGP, Stk# 8047, EROPS, A/C, Smooth Drum, 484 Hrs, 4 Cyl. Cummins Eng, Sweeps, Rear Screen, St./Tilt Blade, 7415 Hrs, 23.1x26 Tires .........................................$62,500 95% U/C, w/Winch, 13’ Blade ............$129,500

2006 Komatsu PC200LC-7, Stk# 8079, EROPS, A/C, 4761 Hrs, 41” Bkt, 32” Pads, 10’6” Wide .. ..............................................................$79,500

2007 John Deere 450J LGP, Stk# 7704, OROPS, Sweeps, Eng. Encl, 6-Way Blade, 3303 Hrs, 80% U/C, New Pins & Bushings & Sprockets, 24” Pads, 9’7” Blade .....................................$39,500

2006 Terex TH644C, Stk# 7931, EROPS A/C & Heat, 6,000 lbs., 44 ft., 4WD, 4WS, 3,155 hrs., 13x24 Foam Filled Tires, 48" Forks, 50" Frame, 4 Cyl. JD Eng.............................................$32,500

2005 Ingersoll Rand DD24, Stk# 7888, 49” 2011 John Deere 650J LT, Stk# 7618, OROPS, Double Smooth Drum w/Water System, 950 Hrs, Sweeps, Rear & Side Screens, 6 Way Blade, 80% 4 Cyl. Kubota Eng...................................$21,500 U/C, 1283 hrs., 18" Pads, 8' 9" Blade.......$86,500

2005 Sullair 185DPQJD, Stk# 8067, 125 PSI, 45KW, 2800 Eng. RPM, 67 Hrs, ST175/80D13 Tires, JD Eng, 2870 Lbs, Trailer Mounted $7,500

2011 Broce KR350, Stk# 8087, EROPS, A/C, 493 hrs., hrs., 8 ft. Center Mounted Boom, 150 Gallon Water system, 4 Cyl. Kubota Diesel Eng., LT225x75Rx16 Air Tires........................$33,500

2005 John Deere 450J LT, Stk# 8085, OROPS, 6-Way Blade, 2530 Hrs, 16” Pads, 8’1” Wide .... ..............................................................$34,500

2006 Harlo HP6500, Stk# 8057, Straight Mast, 6500 Lbs, 22’, 2WD, 2516 Hrs, 48” Forks, 62” Frame, 4 Cyl. JD Eng, 19.5Lx25 Front Tires, 11Lx16 Rear Tires, Wt. 13,410 ............$19,500

2006 Ingersoll Rand XP375, Stk# 8055, 93 KW 2007 Intersoll Rand P185, Stk# 8071, 50 PSI, @ 2400 rpm, 65PSI, 4347 Hrs, 4966 Lbs, JD Eng, 2447 Hrs, ST205/75D15 Tires, JD Eng, 2990 ST225/75D15 Tires, Trailer Mounted ....$16,500 Lbs, Trailer Mounted ..............................$8,500

2004 John Deere 310G, Stk# 8084, EROPS, A/C, 4WD, 2916 Hrs., 24” Bucket, Quick Connect Bucket, Aux. Hyd., 2 Stick Controls, 12x16.5 Front Tires, 19.5Lx24 Rear Tires ..........$36,500

2000 Cat 301.5, Stk# 7918, OROPS, 2778 Hrs, 16” Bkt, Aux. Hyd., 9” Rubber Tracks, 39” Blade, 3 Cyl. Cat Eng.........................................$13,500

2006 Hyundai Robex 55-7, Stk# 8100, EROPS, A/C, 2868 Hrs, 22” Quick Connect Bucket, Front Blade, 16” Rubber Tracks, Aux. Hyd, 4 Cyl. YanMar Eng, 6’4” Wide ........................$29,500

2008 Cat CS54, Stk# 8138, 84" Smooth Drum w/Padfoot Shell Kit, 1,978 hrs., 18x26 Tires, 4 Cyl. Cat Eng ............................................$85,500

1984 Cat 953, Stk# 8104, EROPS, 56 Hrs, 93” Bkt, 20” Pads, 10’4” Height ..................$16,500

2005 Ditch Witch RT40, Stk# 7206, 870 Hrs, 50% Tires, 64” Blade, Fixed Boom, 3 Cyl. Deutz Eng .........................................................$11,500

2008 Case 420CT III, Stk# 7884, OROPS, 59 Hrs, 13” Rubber Tracks @ 70%, Aux Hyd, 4 Cyl Eng ........................................................$21,500

2004 Cat XQ30P4, Stk# 8072, 3,702 hrs., 30KW 2005 John Deere 450J LT, Stk# 8086, OROPS, 6 2007 Cat D6R LGP III, Stk# 8102, EROPS, A/C, Standby, 27KW Prime Rating, 49hp, Trailer Mounted, Cat CZ.2 Diesel Eng., ST225/75 Tires. Way Blade, 2546 Hrs., 16” Pads, 8’1” Wide ...... Sweeps, Rear Screen, St/Tilt Blade, 4905 Hrs, ..............................................................$13,500 ..............................................................$34,500 85% U/C, Draw Bar ............................$139,500

2001 Cat D6R, Stk# 7870, EROPS, A/C, Semi U Tilt Blade, 11,616 Hrs, 90% U/C, 3 Shank Cat Ripper, 22” Pads, Width Track to Track 8’, Width of Blade 10’8”, Height 10’5”..................$87,500

2007 Cat D6R XL III, Stk# 8006, EROPS, A/C FM Stereo, Sweeps, Rear Screen, Semi U Tilt Blade, 6249 Hrs., 80% UC, 24” Pads, Diamond 80J 3 Shank Ripper s/n 100115, 10’8” Blade $159,500

1999 John Deere 310E, Stk# 8109, OROPS, 2WD, 3,592 hrs., 12" Bucket, Aux. Hyd., 2 Stick Controls, 19.5Lx24 Rear Tires, 11Lx16 Front Tires ......................................................$18,500

2007 Cat D6R LGP, Stk# 8103, EROPS, A/C, FM Stereo, Sweeps, Rear Screen, St/Tilt Blade, 4496 2009 Cat D6K LGP, Stk# 8097, EROPS, A/C, FM Stereo, 6-Way Blade, 3758 Hrs, 80% U/C, 30” Hrs, 80% U/C, Diamond 80J (3) Shank Ripper, s/n 1101152, 36” Pads, 13’3” Blade ..$149,500 Pads, 10’ Height, 11’ Wide..................$109,500

2006 Kobelco SK290LC, Stk# 8004, EROPS, A/C, FM Stereo, 8802 Hrs, 46” Bkt, Aux. Hyd, 32” Pads, 11’3” Wide....................................$56,500

Page 4 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WESTERN EDITION Circulated Throughout •Alaska •Arizona •California •Colorado •Hawaii

•Idaho •Montana •New Mexico •Nevada •Oklahoma •Oregon •Texas •Utah •Washington •Wyoming

IN THIS ISSUE SPECIAL SECTION…

BACKHOES & ATTACHMENTS

Be sure to check out this special section! Keep up to date with the latest information on backhoes and attachments.

FEATURES…

PALMER JOHNSON SET FOR JLG SERVICE ROLE

BIELLER APPOINTED VP OF BUSINESS DEVELOPMENT OF ATLAS COPCO

JLG is establishing a network of authorized service providers to help its direct customers have convenient access to service support in the field.

Founder, Publisher & CEO Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr.

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 Toll Free Fax Web site Editorial e-mail Advertising e-mail

215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com

editorial@cegltd.com production@cegltd.com

Most recently Bieller was the sales manager of Atlas Copco Rental, responsible for Canada and the western United States.

For advertising rates: Contact Edwin M. McKeon Jr. National Sales Manager LIUGONG MACHINERY CORP. RECEIVES BEST 215/885-2900 BRAND AWARD Toll Free 800/523-2200 In recent years, LiuGong has achieved outstanding results in brand building Fax 215/885-2910 through implementing a modern and unified brand strategy. e-mail tmckeon@cegltd.com

GOV. CONTRACTORS RECOGNIZED FOR QUALITY PERFORMANCE

Kirby-Smith Machinery Inc. supplies construction equipment parts for the Department of Defense and other agencies.

32 32

‘THE ROAD CONNECTION’ PAYS VISIT TO AEM’S HEADQUARTERS

During their time at AEM headquarters, The Road Connection team had an opportunity to speak with the president of AEM, Dennis Slater.

SAN DIEGO’S HAWTHORNE CAT JOINS NORAM NETWORK

Hawthorne CAT is the authorized dealer for Caterpillar construction and power equipment in San Diego, Hawaii, Guam, Saipan and American Samoa.

56 32

AT 84, BOB TILLEY RETIRES FROM KIRBY-SMITH MACHINERY INC. During his time at Kirby-Smith, Tilley has covered most of the state of Oklahoma.

50 CLASSIFIEDS 52 COMING AUCTIONS 54 BUSINESS CALENDAR 33

EQUIPMENT… 24 VOLVO BL60B, BL70B Backhoes 46 TEREX SF3502C Slipform Paver

Contact Dale Agnew

•Arizona •Colorado •New Mexico •Oklahoma •Texas •Wyoming

Toll Free 877/877-4997 Fax 972/695-6049 e-mail dagnew@cegltd.com Contact Frank Strazzulla

•Alaska •California •Hawaii •Nevada •Oregon •Utah •Washington

949/459-1767 Fax 949/203-2859 e-mail fstrazzulla@cegltd.com Contact Patrick Kiel

•Idaho •Montana

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com Construction Equipment Guide Western Edition is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Application to mail at periodicals postage prices is pending at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2012, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 11, 2012 • Page 5

OPERATING WEIGHTS TO 81,600 POUNDS

BUCKET CAPACITIES TO 2.5 CUBIC YARDS

YANMAR & CUMMINS ENGINES

DIGGING FORCES UP TO 48,559 POUNDS

UP TO 260 HORSEPOWER DIESEL ENGINES

DUMPING HEIGHTS TO 24’4”

DIGGING DEPTHS TO 24’1”

YOU DON’T HAVE TO DIG REAL DEEP... ...TO DIG REAL DEEP You don’t have to have real deep pockets to invest in a LiuGong. LiuGong hydraulic excavators are designed and built to compete value-wise, both in the showroom and out on your next job. With lower ownership and operating costs, you’ll be able to break out of your costly earthmoving routine and make some money with a LiuGong. From a mini-excavator for your next landscaping job to a full-sized machine for some major pipeline chores, check one out at your LiuGong dealer today.

LiuGongNA.com 281-579-8882

LiuGong is a fifty-plus-year-old construction equipment manufacturer with a huge range of products for the North American quarry, construction, recycling, timber, landscaping, utility and other markets – WHEEL LOADERS. HYDRAULIC EXCAVATORS. BACKHOE-LOADERS. SKID-STEER LOADERS. SOIL COMPACTORS. LiuGong is the only equipment manufacturer to receive the coveted National Quality Award of China and are ISO9001 and ISO14001 certified. Truly a top-shelf, world-class organization.

VISIT YOUR AUTHORIZED LIUGONG DEALER TODAY Arizona Earhart Equipment Corp. Tucson 520-889-6396 California Westrax Rancho Dominguez 310-631-2727

Texas Anderson Machinery Co. Austin 512-272-8133

Texas (Cont’d.) Anderson Machinery Co. San Antonio 210-661-2366

Corpus Christi 361-289-6043

Victoria 361-575-8111

Pharr 956-781-5995

SELECT TERRITORIES AVAILABLE

Texas (Cont’d.) Noble Equipment Houston 855-777-4424

Page 6 â&#x20AC;˘ August 11, 2012 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

ZÄ&#x17E;ĹŻĹ?Ä&#x201A;Ä?ĹŻÄ&#x17E; Ć&#x2039;ĆľĹ?Ć&#x2030;ĹľÄ&#x17E;ĹśĆ&#x161; Íť ZÄ&#x17E;Ć?Ć&#x2030;Ĺ˝ĹśĆ?Ĺ?Ç&#x20AC;Ä&#x17E; ^Ä&#x17E;Ć&#x152;Ç&#x20AC;Ĺ?Ä?Ä&#x17E;

For Reliable, Durable Construction Equipment, choose Komatsu

2004 Komatsu PC400LC-7, 9,000 Hrs $92,500

Equipmentâ&#x20AC;&#x201D;New, Used & Rental Partsâ&#x20AC;&#x201D;New, Remanufactured & Used Service on site or in our state-of-the-art facilities

For More Information on Used Equipment, Contact

2006 Komatsu PC50MR-2, 42â&#x20AC;? Bkt, Sidewalk Grader --- CALL

Brad Trippâ&#x20AC;&#x201D;Used Equipment Manager (801) 952-4729

SAVE TIME â&#x20AC;˘ SAVE MONEY â&#x20AC;˘ SAVE LABOR â&#x20AC;˘ SAVE OIL

bradt@komatsueq.com

877-KOMATSU www.komatsueq.com

Nevada Â&#x2021; Utah Â&#x2021; Wyoming

www.flangelock.com

S O SHOR RING G & SUsource! PPLY Your Complete Rental Resource!

steel trench shield

Houston 2515 Galveston Rd. Houston, TX 77017 2IĂ&#x20AC;FH )D[ www.proshoring.com

slide rail system

gas monitors

Other Supplies:

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

PRO OFESSION FESSIO SS ONALL

â&#x20AC;˘ No tools required â&#x20AC;˘ No expensive hardware needed â&#x20AC;˘ No more rags stuffed into hoses â&#x20AC;˘ No more messy plastic caps â&#x20AC;˘ The ultimate contamination control tool â&#x20AC;˘ One hand installation â&#x20AC;˘ Eliminate hydraulic oil spills & clean up â&#x20AC;˘ Quick installation & ease of usage â&#x20AC;˘ Safe for personnel & environment â&#x20AC;˘ Industy acclaimed â&#x20AC;˘ 100% Made in USA

2006 Komatsu D65WX-15, 7,100 Hrs CALL

Â&#x2021; manhole shields Â&#x2021; build-a-boxâ&#x201E;˘ Â&#x2021; quicksheetâ&#x201E;˘ guideframe Â&#x2021; blowers/hoses Â&#x2021; fall protection

LONE ONE STAR AR BRANCH RANCH 713-671-2551 1-2551

Equipment q p Distributor

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ August 11, 2012 â&#x20AC;˘ Page 7

Dynapacâ&#x20AC;&#x2122;s CC 624F 7KH XOWLPDWH LQ YLVLELOLW\ IXHO HIÂżFLHQF\ and compaction performance... Dynapacâ&#x20AC;&#x2122;s CC624HF double-drum, high frequency vibratory asphalt rollers offer complete compaction control including mat temperature, speed, blows per foot, and other exceptional features. Designed to meet the needs of road contractors â&#x20AC;&#x201C; HIÂżFLHQWO\ FRPSDFWLQJ DQ\ W\SH RI DVSKDOW PL[

Dynapac â&#x20AC;&#x201C; Providing Dynamic Compaction Solutions for over 70 years.

Authorized Dynapac Dealers American Machinery www.americanmachineryhawaii.com

CL Boyd www.clboyd.com

Colorado Machinery www.coloradomachinery.com

R.B. Everett & Co. www.rbeverett.com

Honolulu, HI 808.682.8282 Hilo, HI 808.961.6673 Kona, HI 808.329.5574 Maui, HI 808.242.4664 Kauai, HI 808.246.0097

Ardmore, OK 866.720.2693 Oklahoma City, OK 405.942.8000 Lawton, OK 800.633.2693

Colorado Springs, CO 719.475.1100 Pueblo West, CO 719.547.3505 Frederick, CO 303.833.5900 Fort Collins, CO 970.482.7154

Pasadena, TX 281.991.8161

Cate Equipment Co. www.cateequipment.com Boise, ID 208.884.0500 Pocatello, ID 208.232.7001 Salt Lake City, UT 801.973.2900 Gillette, WY 307.682.0571

Bane Machinery www.banemachinery.com Dallas, TX 214.352.2468 Tyler, TX 903.597.6641 Fort Worth, TX 817.847.5894

Closner Equipment Co. Inc. www.closner.com

Bee Equipment Sales, Inc. www.beeequipmentsales.com Lubbock, TX 806.745.1511

Dynapac USA 3700 East 68th Avenue Commerce City, CO 80022

San Antonio, TX 210.732.2131 Austin, TX 512.272.8200

Phone: 800-732-6762 Fax: 303-288-8828 www.dynapac.us

Craig Taylor Equip. Co. www.craigtaylorequipment.com Anchorage, AK 907.276.5050 Wasilla, AK 907.376.3838 Soldotna, AK 907.262.5977 Fairbanks, AK 907.452.1192

Doggett Heavy Machinery Services www.doggettmachinery.com Victoria, TX 361.570.6666 Corpus Christi, TX 361.289.0727 Brownsville, TX 956.831.9377 Pharr, TX 956.787.0001

Modern Machinery www.modernmachinery.com Missoula, MT 800.332.1617 Kalispell, MT 800.434.4190 Billings, MT 800.735.2589

Pape Machinery, Inc. www.papemachinery.com Sparks, NV 775.353.0440 Fowler, CA 559.834.4774 Newark, CA 510.790.3600 Rohnert Park, CA 707.584.9161 Gilroy, CA 408.848.4150 French Camp, CA 209.983.8122 Sacramento, CA 916.922.7181 Redding, CA 530.241.4555 Portland, OR 503.289.1103

Pape Machinery, Inc., cntâ&#x20AC;&#x2122;d. Tangent, OR 541.812.0207 Eugene, OR 541.484.5424 Central Point, OR 541.772.4706 Klamath Falls, OR 541.884.5683 Bend, OR 541.389.5869 Kent, WA 206.575.0140 Mt. Vernon, WA 360.424.3291 Tacoma, WA 253.922.8718 Kelso, WA 360.575.9959 Wentachee, WA 509.664.1265 Yakima, WA 509.248.7910

Rowand Machinery Co. www.rowand.com Spokane, WA 509.838.5252 Pasco, WA 509.547.8813 Hayden, ID 208.762.2657

Tom Growney Equip., Inc. www.growneyinc.com El Paso, TX 915.598.1133 Albuquerque, NM 505.884.2900 Farmington, NM 505.326.1101 Hobbs, NM 505.392.6923

Wyoming Equipment www.coloradoequipment.net Cheyenne, WY 307.638.8669

Atlas Copco Stores www.atlascopco.us Phoenix, AZ 623-780-0200 www.atlascopco.us/phoenix Tucson, AZ Store 520.834.0400 www.atlascopco.us/tucson San Diego/Los Angeles, CA 760-599-9299 www.atlascopco.us/vista Denver, CO 303-288-3258 www.atlascopco.us/denver

Page 8 â&#x20AC;¢ August 11, 2012 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

8LI %)( -2*36 )\IGYXMZI *SVYQ 8LI %)( -2*36 )\IGYXMZI *SVYQ

7ITX ` ,MPXSR 6SWIQSRX RIEV 'LMGEKS 3Â´,EVI %MVTSVX ` [[[ EIHRIX SVK JSVYQ 7ITX ` ,MPXSR 6SWIQSRX RIEV 'LMGEKS 3Â´,EVI %MVTSVX ` [[[ [ EIHRIX SVK JSVYQ

*8DUG WKH +RXVH

)H[EVH 7YPPMZER

(EZMH 6EWS

)PIGXMSRW =SYV &YWMRIWW TPYW &SRYW 7IWWMSR 2IKSXMEXMSR 7OMPPW JSV )\IGYXMZIW 4EYP 0MWRIO

2IEP ;MRFIVK

)RIVK] 3ZIVZMI[ 6IH 'EZERI]

*VERO 1ERJVIHM 4ERIP 1SHIVEXSV

8MIV ERH XLI *YXYVI SJ 9WIH )UYMTQIRX 1EVOIXW

4IXIV &PEOI

-RXIVRIX :MWMFMPMX] )H 7XIIRQER

6IRXEP ERH XLI (IEPIVÂ´W &YWMRIWW 1SHIP 0EVV] /E]I

Ten Products. 24 Months.

7KDWÂ·OO KRRN \D.

8SQ 6LIMR

&UDZOHU &UDQHV

5RXJK 7HUUDLQ

SCC8100 SCC8150 SCC8200 SCC8200RA SCC8300 SCC8500

SRC840 SRC865 SRC865XL SRC880

Ringer Attachment

For more information, please visit our website at www.sanyamerica.com

318 Cooper Cir. South, Peachtree City, GA 30269 Tel: 678-251-2869 | Fax: 770-631-7731 Email: sales@sanyamerica.com www.sanyamerica.com

&RQWDFW 2XU 3DUWQHUV IRU $GGLWLRQDO ,QIRUPDWLRQ #*, )ZESBVMJDT t #JOEFS .BDIJOFSZ t $PBTU $SBOF $PNQBOZ t $VTUPN 5SVDL &RVJQNFOU % $ #BUFT &RVJQNFOU $P *OD t 'PVS 4FBTPOT &RVJQNFOU *OD t *NQFSJBM $SBOF 4FSWJDFT *OD t /PSUIFBTU $SBOF 4BMFT

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ August 11, 2012 â&#x20AC;˘ Page 9

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

1999 Komatsu D41P-6; #5952, Cab/AC, 27.5â&#x20AC;? Tracks, Drawbar, 4350 Hrs ......................$CALL

2003 Komatsu D61PX-12; #81788, Cab/AC, 34â&#x20AC;? Tracks, Drawbar, 12,050 Hrs ..........$59,500

2006 Komatsu PC78MR-6; #81338, Cab/AC, Blade, Aux Hyd, 2850 Hrs ....................$69,500

1988 Komatsu PC200LC-3; #91617, Mech Thumb, 31.5â&#x20AC;? Tracks, 9â&#x20AC;&#x2122;6â&#x20AC;? Arm ............$34,500

2003 Komatsu WA250-3; #81368, Cab/AC, QC/ Bucket, 7300 Hrs ..................................$67,500

2003 Komatsu WA380-5; #91662, Cab/AC, QC/ Bucket/Forks, 7900 Hrs ........................$83,500

2009 Deere 700J LGP; #81768, Cab/AC, Winch, Sweeps, 350 Hrs..........................$CALL

2007 Komatsu D65WS-15EO; #81710, Cab/AC, 32â&#x20AC;? Shoes, Sweeps, 1900 Hrs ............$179,500

2005 Caterpillar 953C; #80891, Cab/AC, GP Bkt w/Teeth, 3650 Hrs ........................$106,500

2008 Caterpillar 420E; #91691, Cab/AC, 4x4, Ext-A-Hoe, Aux Hyd, 3350 Hrs..............$59,500

1996 Komatsu PC300LC-6; #91643, Cab/AC, QC, Aux Hyd, 13â&#x20AC;&#x2122; Arm, 33.5â&#x20AC;? Shoes......$59,500

2007 Komatsu CK35-1; #81697, OROPS, 2-Speed, GP Bkt, 1400 Hrs ..................$32,500

Page 10 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CALL DOUG OR SAM (866) 485-7180 WWW.RBUSED.COM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 11, 2012 • Page 11

Thompson Tractor, Wagner CAT Named New NorAm Dealers Wagner Equipment Company and Wagner Rents, based in Aurora, Colo., now represents the NorAm 65E compact motorgrader in Colorado, New Mexico and west Texas. The longtime Caterpillar dealer sells, rents and supports the 65E at each branch location including its extensive network of Wagner Rents Stores. “NorAm offers a compact motorgrader for our valued customers. The 65E provides excellent quality and productivity with value second to none. It definitely meets the Wagner creed to ‘meet the complete needs of our customers,’” said Brad Cofield, Wagner vice president of sales. Thompson Tractor, headquartered in Birmingham, Ala., has been appointed the NorAm dealer with its 17 locations in Alabama and northwest Florida. Thompson Tractor is a family owned company in business for more than 55 years. “The 65E grader is a complement to the line of equipment that we offer our customers and its reputation for quality and uptime meets our organization’s goals in supporting our marketplace,” said Kenny Bishop, Thompson vice president of sales. “We are extremely pleased to have Wagner CAT and Thompson Tractor join our team,” said Dave Watson, vice president of NorAm. “These organizations and their professional team of sales and support staff are very highly respected in their marketplaces.” For more information, visit www.noram65.com.

Palmer Johnson Set for JLG Service Role JLG appointed Palmer Johnson Power Systems as an authorized service provider of Oklahoma City. The Oklahoma City branch becomes the fourth Palmer Johnson branch awarded JLG Authorized Service Provider status. The Arizona and Kansas branches were awarded authorized status in 2010 along with northern California in 2011. As a JLG Authorized Service Provider, Palmer Johnson acts as an extension of JLG to augment repair and service needs. Services now available through Palmer Johnson include equipment repair, equipment maintenance, rebuilding of major components, annual inspections, mobile service, warranty repairs, annual service agreements and local parts stock. Palmer Johnson’s factory trained technicians are able to provide a quick response for affordable and reliable service support. JLG is establishing a network of authorized service providers to help its direct customers have convenient access to service support in the field. These third party companies are focused on machine service where customer uptime and reduced maintenance costs are their priority. They are trained and evaluated by JLG to service and repair JLG equipment and in many cases can complete repairs for other types and brands of construction and industrial equipment. The authorized service provider territory for Oklahoma includes customers within a 120 mi. radius of Oklahoma City. For more information, visit www.pjpower.com.

BAYONET

a i la b v A g a n c in n i F PR 0% A

1-800-427-7368 • VCES is the Largest DOOSAN Portable Power Distributor in North America (Formerly Ingersoll Rand)

• Compressors • Generators • Light Towers • Forklifts • Compaction

• Over 120 Years Combined Service Experience on All Makes & Models

Covered By One or More of the Following US Patents: US 6,430,849 B1 US 6,751,896 B2 US 7,117,618 B2 US 7,257,910 B2

VCES...Your #1 Source for Parts & Service from Maintenance Programs to Complete Overhauls

www.Bayonetbreaker.com View at YouTube/Bayonet Breaker Go from Excavating to Hammering in 3 seconds. Fits most models of Backhoes and Excavators

Certified Master Distributor for Bayonet Products

Construction Equipment & Services www.vcespower.com 2210 McAllister Rd. Houston, TX 77092

3401 E. Park Row Dr. Arlington, TX 76010

713-681-9221

817-633-1010

Page 12 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Komatsu WA600-6 Wheel Loader, 1:50 Scale $75

Caterpillar 785D Mining Truck, 1:50 Scale $125

John Deere 872 GP Motor Grader, 1:50 Scale $50 Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale............$75 Allis-Chalmers HD-41 Dozer, 1:25 Scale ....................$200 Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$60

All New in Box

Bantam C-35 Crawler Shovel, 1:50 Scale ....................$70 Bobcat E35 Compact Excavator, 1:25 Scale ................$50 Bobcat M400 Gold 50th Anniversary Skid Steer Loader,

John Deere 315SJ Backhoe/Loader..............................$35

800-523-2200

John Deere 400D Articulated Truck ..............................$40

Ext. 197

John Deere 624K Military Wheel Loader, 1:50 Scale ..$35

Bobcat M610 Golden 50th Anniversary Skid Steer

John Deere 624K Wheel Loader, 1:50 Scale ................$45 John Deere 872 GP Grader, 1:50 Scale ........................$50

Loader..............................................................................$25

Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer Set, 1:50 Scale ................................................................$60 Bobcat 773 50th Anniversary Skid Steer Loader, 1:25 Scale ................................................................................$25 Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ......$25 Case CX210B Excavator, 1:50 Scale ............................$40 Case 330B Articulated Truck, 1:50 Scale......................$40 Case 1850K Dozer, 1:50 Scale ......................................$40 Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale .. ..........................................................................................$50 Caterpillar AP655D Paver, 1:50 Scale ..........................$50 Caterpillar D7E Track-Type Tractor, 1:50 Scale............$85 Caterpillar D8R Track Type Tractor, 1:50 Scale............$50 Caterpillar D11R Track-Type Tractor, 1:50 Scale ..........$85 Caterpillar 140H Motor Grader, 1:50 Scale ..................$60 Caterpillar 247B Multi-Terrain Loader, 1:32 Scale........$40 Caterpillar 308C CR Mini-Excavator, 1:50 Scale ..........$50 Caterpillar 365B Excavator, 1:50 Scale ........................$70 Caterpillar 365C Front Shovel, 1:50 Scale ..................$110 Caterpillar 416 Backhoe/Loader, 1:32 Scale ................$75 Caterpillar 432E Backhoe/Loader, 1:50 Scale ..............$70

JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$50

CALL Toll Free

1:25 Scale ........................................................................$35

Bobcat S175 Skid Steer Loader, 1:25 Scale ................$40

International TD-25 Dozer, 1:50 Scale ..........................$65 John Deere 200C LC Excavator ....................................$40

Bantam Shovel Mounted on a White Truck, 1:50 Scale$75

Bobcat S175 Skid Steer Loader, 1:50 Scale ................$20

International TD-24 Military Dozer, 1:50 Scale ............$45

Komatsu D51 PX Dozer, 1:50 Scale ..............................$65 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale $50 Caterpillar CT660 On-Highway Truck w/Lowboy Trailer, 1:50 Scale ......................................................................$100 Caterpillar 785D Mining Truck, 1:50 Scale..................$150 Caterpillar 906H Compact Wheel Loader, 1:50 Scale ..$45 Caterpillar 963D Track Loader, 1:50 Scale....................$55 Caterpillar 966A Wheel Loader, 1:50 Scale ..................$50 Caterpillar 977 Traxcavator, 1:50 Scale ........................$55 Caterpillar 980G Wheel Loader, 1:50 Scale ..................$50 Caterpillar 992G Wheel Loader, 1:50 Scale ..................$75 Caterpillar Military 924H Versalink Loader in Desert Camouflage, 1:50 Scale ..................................................$45 Caterpillar Military 120M Motor Grader in Desert Camouflage, 1:50 Scale ..................................................$70 Dynapac CC232 Vibratory Compactor, 1:35 Scale ......$35 Euclid R32 Off-Highway Truck, 1:50 Scale ..................$35 Hamm GRW280 Compactor w/Cabin............................$75 Hamm 3307 Compact Roller, 1:34 Scale ......................$45 Hitachi EH700 Off-Highway Truck, 1:50 Scale..............$35 International TD-15 Dozer, 1:50 Scale ..........................$60 International TD-20E Dozer, 1:64 Scale ........................$24 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................$60

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Komatsu D375 Dozer, 1:50 Scale ..................................$90 Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80 Komatsu HM250 Articulated Truck, 1:50 Scale ..........$70 Komatsu PC14R Mini-Excavator, 1:32 Scale ................$40 Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$200 Komatsu SK1020 Skid Steer Loader, 1:25 Scale ........$35 Komatsu SK1026 Skid Steer Loader, 1:25 Scale ........$35 Komatsu WA470 Wheel Loader, 1:50 Scale..................$60 Komatsu WA600-6 Wheel Loader, 1:50 Scale ..............$75 Komatsu 475A-5EO Dozer, 1:50 Scale ........................$125 LeTourneau Military Super C Scraper, 1:50 Scale ......$35 Link-Belt 80100 Rough Terrain Crane ........................$190 Northwest 25-D Backhoe, 1:50 Scale ............................$60 Northwest 25-D Shovel, 1:50 Scale ..............................$85 Terex RC45 Rough Terrain Crane, 1:50 Scale ............$180 Terex RT130 Rough Terrain Crane, 1:50 Scale ..........$145 Vogele Vision 5200-2 Paver, 1:50 Scale ......................$140 Volvo A25D Articulated Truck, 1:50 Scale ....................$60 Volvo L70E Wheel Loader w/Attachments, 1:50 Scale..95 Volvo L90E Wheel Loader, 1:50 Scale ..........................$75 Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale ..........$70

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 11, 2012 • Page 13

Duane - 24/7 - (303) 994-1904 duane@denvereast.com

303-341-2020 800-332-1338

Mark - 24/7 - (720) 938-5042 mark@denvereast.com

15507 E. 18th Ave. • Aurora, CO 80011 WWW.DENVEREAST.COM

11 Different Cement and Fly Ash Silo's, 40 to 200 Ton Capacity, Located in Arizona............................$10 to $37,000

2001 McNeilus Portable12 Wet Batch Plant, with Agg. Bins, 2 Silos, Augers, New Drum Liners, Radial Stacker, Controls, Very Good Condition, Plus - plus ..........$227,000 Arizona

Kolberg 30" X120' Radial Stacker, All Power, 2-30' swingaways, Located in Arizona .......................................$32,000

Hitachi EX 450 LC, 8900 Hrs., mounted with LaBounty 228 Shear .........$127,700

1995 Cat 773B Truck, s/n 63W4627, Low Component Hours ......$119,000

2007 Hitachi ZX200LC, Hyd. Thumb, Quick Coupler, 2200 Hrs ....$105,000

Komatsu D41A, 5900 Hrs, 6 way blade, rear ripper, 60% UC ..$23,700

Komatsu PC200LC-6, Hyd. Thumb, 60% UC................................$49,000

Waldon Sweepmaster Broom, Cab, Gas Engine ............................$6,800

Cat D8N Dozer, U Blade, Rear Ripper, 70% UC, 10,755 Hrs ............ ..........................................$127,000

1998 Hitchi EX 450LC5, 54” Bkt ...... ............................................$47,500

Cat 627E, s/n 6GB00758, Good Components, Oil Samples Avail., Located in California ............$59,500

96 Volvo L150C, Q Tach w/ Bkt & Forks, Good Loader ............$47,000

1994 Western Star, 33,000# Crane, 3406 Cat Power ..................$38,000

John Deere 992D LC, Hyd. Thumb, 65% UC, Good Runner ........$35,700

Hanomag 55D Loader, Q Tach, 2-Bkts and Forks, 12K Hrs, Runs and works good ..........................$21,000

PARTIAL LISTING ONLY!

PLEASE VIEW WEBSITE @ WWW.DENVEREAST.COM

PARTIAL LISTING ONLY!

ion doing precis e - a dozer in g. ag in im ad to gr h It’s hard eed of roug fast. twice the sp on at g pc in To ad ’s gr st. That twice as fa 3D grading, m /3 D M C 2 ti o n in g. co to p co n p o si

Page 14 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LiuGong Machinery Corp. Bieller Appointed VP of Business Receives Best Brand Award Development of Atlas Copco LiuGong Machinery Corp., was granted China’s Best Brand Award for Acquisition Efficiency on June 13 at the 2012 Global Brand Summit. “As a famous Chinese heavy industry enterprise with more than 50 years’ experience, LiuGong has high aspirations but is down to earth,” said Zhou Lianxi, marketing professor of Brock University of Canada. Zhou also is one of the branding committee members. “Its stable, step by step global strategy is helping LiuGong become one of the most important full line engineering machinery manufacturers and exporters in the world. Comparing with LiuGong’s low key development pattern, its acquisition of HSW Dressta this spring showed a really high efficiency expansion style.” In recent years, LiuGong has achieved outstanding results in brand building through implementing a modern and unified brand strategy. After 2008, LiuGong began cooperating with international branding and public relations companies, which has greatly enhanced the brand image. People can often see LiuGong advertisements in industry newspapers and magazines, billboards along the highway, machines demonstrating at tradeshows or even players wearing LiuGong jerseys running on the field. The professional and effective brand promotion provides great support for sales. The Global Brand Summit is held by China Brand Center (CBC) of Sun Yat-Sen University and 21st Century Business Herald. The annual top meeting is for refining the best experiments, summarizing the particular model and forecasting the future trend of Chinese enterprise’s brand building activities. LiuGong, headquartered in Liuzhou, China, has among the most expansive array of product lines of any Chinese manufacturer, including wheel loaders, excavators, truck mounted and crawler cranes, bulldoz-

Plant Trees!

ers, rollers, motorgraders, forklifts, miniexcavators, skid steers, backhoe loaders, pavers, cold planers, concrete equipment, drilling machines and mining dump trucks. The company is among the world’s fastest growing CE firms, with $2.76 billion in sales in 2011 when the company sold 61,700 machines. LiuGong delivers results for its investors as well, having posted an average of 40 percent annual revenue growth for the past six years running in overseas markets. It is ranked among the world’s top 17 machine manufacturers. As a leading exporter of machines from China, LiuGong has one of the largest global dealer networks of any of its Chinese competitors. The network consists of more than 380 dealers in over 115 countries, backed by 10 subsidiary offices with technical staff, and parts depots that deliver items within 48 hours. The company’s strong dealers, subsidiaries, and the customer focused organization within headquarters give it a distinct advantage in providing the 24/7 support required by customers anywhere in the world. LiuGong’s machines are suited to rapidly growing markets. The environment in China which nurtures their design is known to be the toughest in the world in terms of run times between maintenance, harsh work environments, cost demands and rough operating conditions. LiuGong machines use proven technologies and thrive in these rigorous settings — they are highly efficient, durable, simple to run, easy to service and offer affordable value, according to the manufacturer. LiuGong runs 24 manufacturing plants in China, Poland and India that adhere to Six Sigma quality methods. LiuGong supports a world class R&D function and has a team of more than 14,000 employees, including 1,000 engineers, standing behind every machine the company makes. For more informations, visit www.liugong.com.

Brian Bieller has accepted the position of team.” vice president of business development at For more information, call 800/732-6762 Atlas Copco Construction Equipment, effec- or visit www.atlascopco.us. tive April 1. In his new role, Bieller will be part of the man- Brian Bieller, new vice agement team and will report president, business directly to Erik Sparby, presi- development, at Atlas dent and general manager of Copco Construction Atlas Copco Construction Equipment. Equipment. Most recently Bieller was the sales manager of Atlas Copco Rental, responsible for Canada and the western United States. Before going to Atlas Copco’s rental division, Bieller had served as vice president of sales and marketing for compaction products at Dynapac USA, an Atlas Copco company. “Brian’s entire career has been spent in the rental and construction market,” said Sparby. “He’s bringing more than 20 years of industry experience with him, and I am happy to welcome him to the

Link-Belt Promotes Hatton to Product Technician in Ky. Tony Hatton has been promoted to product technician at Link-Belt headquarters in Lexington, Ky. Hatton, a three year veteran of Link-Belt, has significant experience with large machinery and as a service technician, having served as an associate hydraulic crane technician previously with Link-Belt. He has completed a broad-based Link-Belt training program and in his new role will be responsible for support for Link-Belt’s full line of hydraulic cranes. “I am confident that our customers will benefit from Tony’s experience and continued dedication to his new role as product technician,” said Frank Snapp, manager, technical product support. For more information, visit www.linkbelt.com.

Page 16 • August 11, 2012 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

see CHART page 26

Model

CASE 580N 580 Super N 590 Super N WT 590 Super N

Loader SAE HP (kw)

Loader Lift Capacity lbs. (kg)

78 (58) 90 (67) 90 (67) 108 (81)

CATERPILLAR 416E 416F 420E/420E IT 420F/420F IT 430E/430E IT 430F/430F IT 450E

87 (64.9) 87 (64.9) 93 (69.3) 93 (69.3) 102 (76.1) 107 (78.7) 124 (92.5)

LIUGONG

(74.5) 766III Standard Stick 100

6,803 (3,086) 7,044 (3,195) 8,425 (3,821) 8,425 (3,821)

6,180 (2,803) 6,751 (3,062) 6,340 (2,876) 7,237 (3,283) 6,356 (2,883) 11,197 (5,079) 11,375 (5,160)

9,577 (4,344)

JOHN DEERE (52) 310K EP 310K 310SK 310SK TC 410K 410K TC 710K

KUBOTA B26 L39 L45 M59

TEREX

Loader Breakout Force lbs. (kg)

70 88 (66) 97 (72) 102 (76) 107 (80) 106 (79) 130 (97)

23.3 (17.4) 35.5 (26.5) 45 (33.6) 57 (42.5)

86 (64.3) TX760B 88 (65.7) TLB840 94 (70.3) TX860B 94 (70.3) TX870B (70.3) TX970B All-Wheel Steer 94

6,600 (2,994) 6,600 (2,994) N/A 7,215 (3,272) 7,200 (3,269) 6,815 (3,091) 9,277 (4,208)

1,300 (589) 2,767 (1,255) 2,898 (6,252) 3,968 (1,800)

7,604 (3,449) 7,291 (3,307) 8,783 (3,984) 8,783 (3,984) 8,783 (3,984)

Backhoe Loading Height ft. (m)

9,506 (4,312) 9,833 (4,460) 11,450 (5,194) 11,463 (5,200)

11.8 (3.6) 12.0 (3.66) 12.0 (3.66) 13.0 (4.0)

Max Digging Depth ft. (m) 14.8 (4.5) 14.5 (4.4) 14.5 (4.4) 15.5 (4.7)

Operating Weight lbs. (kg)

Travel Speed 4th Gear Fwd MPH (kmh) 24.3 (39.1) 24 (38.6) 24 (38.6) 24.2 (38.9)

14,564 (6,606) 16,239 (7,366) 19,985 (9,065) 20,458 (9,280)

25 (40.0) 25 (40.0) 25 (40.0) 25 (40.0) 27 (43.5) 27 (43.5) 25 (40.0)

14,881 (6,750) 14,881 (6,750) 15,201 (6,895) 15,201 (6,895) 15,708 (7,125) 15,708 (7,125) 24,141 (10,950)

10,036 (4,552) 10,772 (4,863) 10,076 (4,570) 11,197 (4,570) 10,225 (4,638) 10,225 (4,638) 11,375 (5,160)

11.9 (3.6) 11.9 (3.6) 11.9 (3.6) 11.9 (3.6) 13.0 (4.0) 13.0 (4.0) 14.6 (4.5)

14.3 (4.4) 14.3 (4.4) 14.3 (4.4) 14.3 (4.4) 15.4 (4.7) 15.4 (4.7) 17.3 (5.3)

22.4 (36.0)

12,095 (5,486)

14.4 (4.3)

17,367 (8,000)

11.5 (3.5)

11.0 (3.4) 10.9 (3.3) 11.2 (3.4) 11.2 (3.4) 12.5 (3.8) 11.2 (3.4) 14.3 (4.4)

17.9 (5.5) 17.9 (5.5) 18.4 (5.6) 18.4 (5.6) 20.0 (6.1) 20.0 (6.1) 22.3 (6.8)

18.6 (29.9) 20.6 (33.1) 20.4 (32.8) 20.5 (32.9) 20.4 (32.8) 20.4 (32.8) 21.8 (35.2)

14,352 (6,510) 14,469 (6,563) 15,194 (6,892) 19,855 (9,006) 17,024 (7,721) 20,494 (9,294) 22,970 (10,419)

11.1 (17.8) 14.3 (23.0) 14.0 (22.5) 15.9 (25.6)

4,001 (1,815) 6,987 (3,170) 7,173 (3,254) 8,344 (3,785)

9,350 (4,241) 9,350 (4,241) 11,051 (5,013) 11,450 (5,194) 10,300 (4,672) 10,640 (4,826) 15,540 (7,048)

2,344 (1,063) 4,605 (2,089) 4,530 (2,055) 5,961 (2,704)

7.8 (2.4) 9.5 (2.9) 7.6 (2.3) 10.5 (3.2)

10,485 (4,756) 10,485 (4,756) 12,291 (5,575) 12,291 (5,575) 12,291 (5,575)

12.3 (3.74) 11.6 (3.5) 12.3 (3.74) 13.1 (3.99) 13.1 (3.99)

8.3 (2.5) 10.1 (3) 10.1 (3) 12.0 (3.6)

14.7 (4.5) 14.8 (4.5) 14.7 (4.5) 15.9 (4.8) 15.9 (4.8)

contact all the tion Equipment Guide to Despite efforts by Construc in this chart. ear app es, not all of them manufacturers of backho

NEQUIPMENTGUIDE.COM VISIT WWW.CONSTRUCTIO LISTINGS. FOR COMPLETE BACKHOE

22.9 (36.9) 25.6 (41.0) 22.9 (36.9) 25.2 (42.1) 25.8 (41.6)

15,151 (6,887) 15,895 (7,210) 15,964 (7,241) 16,986 (7,721) 17,663 (8,029)

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 11, 2012 • Page 17

Page 18 • August 11, 2012 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

www.jcbna.com

VISIT THE JCB DEALER NEAREST YOU Dallas, TX 214-819-3991 Longview, TX 800-245-7702 Waco, TX 800-245-7706 Texarkana, TX 888-327-7370 Tulsa, OK 866-402-4248 Oklahoma City, OK 800-245-7585 www.darrjcb.com

Houston, TX 713-692-4471

San Antonio, TX 210-662-9700

www.adobejcb.com

www.jcbofsouthtexas.com

Lubbock, TX 806-745-2000 Wichita Falls, TX 940-687-2726 Odessa, TX 432-337-2823 Amarillo, TX 806-372-8386 Midland, TX 432-685-9999 Clovis, NM 575-742-2726 www.ascoeq.com

Phoenix, AZ 602-516-7081

West Sacramento, CA 877-383-7985

www.jcbofphx.com

www.muniquipjcb.com

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 11, 2012 • Page 19

Ever since JCB invented the backhoe loader in 1953, it has constantly been a product of innovation making it the world’s best-selling backhoe. Not only that but JCB also offers the widest range of backhoe loaders in the industryy. From the easily transportable Midi CX to the highly productive, fourr-wheel-steer 4CX, one of our 12 distinct models is ideal for your job-site requirements. With our record setting Dieselmax engine geared towards efficiencyy, you’ll get the most out of each work dayy. Contact your nearest dealer to learn more about why JCB is the world’ss best-selling backhoe loaderr..

/JCB

/JCBNA

/JCBNORTHAMERICA

Page 20 • August 11, 2012 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 11, 2012 • Page 21

Page 22 • August 11, 2012 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

CASE AUTHORIZED DEALERS ALASKA

IDAHO

Yukon Equipment Company

Burks Tractor Company

Anchorage Fairbanks Wasilla

Caldwell Twin Falls

(907) 277-1541 (907) 457-1541 (907) 376-1541

Bingham Equipment Casa Grande Parker Yuma

(520) 836-8700 (928) 669-9271 (928) 726-4701

Falcon Power Flagstaff Phoenix

(928) 526-5991 (602) 269-3221

Tucson Tractor Company Tucson

Pioneer Equipment Company Idaho Falls

ARIZONA

(208) 466-7875 (208) 733-5543 (208) 523-5455

MONTANA Titan Machinery Billings Bozeman East Helena Great Falls Missoula

(406) 259-5500 (406) 587-0728 (406) 227-5860 (406) 453-1405 (406) 543-7782

(520) 623-5848

NEVADA CALIFORNIA

Case Power and Equipment

Case Power and Equipment El Cajon Fontana Redding Sacramento Santa Fe Springs Stockton

(619) 873-0123 (909) 355-1075 (530) 245-9000 (916) 649-0096 (562) 903-7377 (209) 464-9600

Diamond A Equipment Oxnard Santa Maria

(805) 485-2103 (805) 925-1869 (661) 327-1641

Las Vegas

Adobe Truck & Equipment Albuquerque

Construction Ag Supply

OCT Equipment

Clifton Durango

(970) 434-7363 (970) 247-0522

Clinton Oklahoma City Tulsa

(580) 332-8453 (580) 323-3422 (405) 789-6812 (918) 437-5085

OREGON Case Power and Equipment

Titan Machinery Colorado Springs Commerce City Fort Collins

(580) 353-3211

Hisle Brothers Ada

Century Equipment Company

(505) 342-2566

OKLAHOMA

Fresno

COLORADO

(702) 876-2223

NEW MEXICO

Sequoia Equipment Company (559) 441-1122

(775) 358-5000

Hertz Equipment Rental

Lawton

Pioneer Equipment Bakersfield

Sparks

(719) 596-2924 (303) 286-7000 (970) 461-4960

Portland Salem

(503) 283-2461 (503) 362-1371

Central Equipment Company Medford

(541) 779-7443

HAWAII

*For * For commercial commercial use use only. only. Customer Customer participation par ticipation ssubject ubjject ttoo ccredit redit qqualification ualification aand nd aapproval pproval bbyy CCNH N H CCapital apital America A merica LLC. L LC. See See your your Case C ase dealer dealer for for details details and and eligibility eligibilit y requirements. requirements. Down Down payment payment may may be be required. required. Offer O f fer good good tthrough hrough SSeptember eptember 330, 0, 22012 012 aatt pparticipating ar ticipating CCase ase ddealers ealers iinn tthe he UUnited nited SStates. t ates. N Not ot aallll customers customers or or applicants applicants may may qualify qualif y for for this this rate rate oorr tterm. erm. CCNH N H CCapital apital AAmerica merica LLLC LC sstandard tandard tterms erms aand nd cconditions onditions will will apply. apply. Taxes, Ta xes, freight, freight, set-up, set-up, delivery, deliver y, and and additional additional options options or or attachments at tachments not not included included in in suggested suggested retail retail pprice. r i c e. O Offer f fer ssubject ubject ttoo cchange hange oorr ccancellation a n c e ll a t i o n w without ithout nnotice. o t i c e. ©2012 ©2012 CNH C N H America A merica LLC. L LC. All A ll rights rights reserved. reser ved. CCase ase iiss a rregistered egistered ttrademark rademark ooff CCNH N H AAmerica merica LLLC. LC. w www.casece.com w w.casece.com

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 11, 2012 • Page 23

UTAH

TEXAS

Century Equipment Company

ASCO Abilene Amarillo Belton Lubbock Manor San Angelo San Antonio

(325) 698-2726 (806) 553-7777 (254) 613-1500 (806) 745-2000 (512) 272-8922 (325) 655-5666 (210) 333-8000

Cedar City Logan Salt Lake City Spanish Fork

(435) 586-4406 (801) 262-5761 (801) 262-5761 (801) 794-1463

Maw Equipment Ogden

(801) 731-0470

Construction Agricultural Supply

WASHINGTON

Wichita Falls

Case Power and Equipment

(940) 322-9950

Hi-Way Equipment Alvin Beaumont Brenham Bryan Euless Gainesville Houston North Houston South Longview Sherman Tyler

(281) 331-1521 (409) 212-8100 (979) 836-6641 (979) 779-8942 (817) 283-2844 (940) 665-4314 (281) 987-1990 (713) 649-0940 (903) 753-4481 (903) 893-7586 (903) 593-0201

Nueces Power Equipment Corpus Christi Edinburg Laredo San Benito Victoria Vinton

(361) 289-0066 (956) 702-0066 (956) 725-0066 (956) 361-0066 (361) 576-0066 (915) 541-0066

Permian Tractor Sales Odessa

Auburn Marysville

(253) 735-2702 (360) 651-2171

Central Machinery Sales Moses Lake Pasco Sunnyside

(509) 765-1257 (509) 547-8920 (509) 837-3833

WYOMING Century Equipment Company Rock Springs

(307) 382-6570

Titan Machinery Casper Cheyenne Gillette

(307) 234-5381 (307) 638-4400 (307) 682-9742

STRIKER HYDRAULIC BREAKERS

(432) 367-8628

A PREMIER HYDRAULIC BREAKER MANUFACTURER FOR OVER 33 YEARS

3 Year Warranty - 2 Moving Parts - No Accumulators 100-12,000 Ft/Lb Product Range

Call: 877-954-9923 FOR DETAILS ON FREE DEMO!

The Original MFG TB-Series & VZ-Series Breakers Formerly distributed by Teledyne & BTI

Always ask for Genuine TOKU “OEM” Parts

3900 Ben Hur Avenue, Willoughby, Ohio 44094

www.toku-america.com

Page 24 • August 11, 2012 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

Volvo Combines Two Machines in One With New Backhoes With the launch of its new BL60B and BL70B, Volvo Construction Equipment has thoroughly redesigned its backhoe loader range — offering improved performance, usability and a modern appearance, according to the manufacturer. The machine combines in a single, stable platform the strength and simplicity of a Volvo wheel loader with the power and performance of a Volvo excavator. With an average operating weight that ranges from 17,500 to 19,500 lbs. (7,938 to 8,845 kg), and gross power of 83 to 98 hp (62 to 73 kW), the BL60B and BL70B were designed and built with power, strength, long life and cost saving efficiency in mind. Loader and Boom The one piece chassis, loader arm and excavator boom are all made from high quality steel and robotically welded, giving precise, constant weld runs for structural integrity. The loader arm has a box-welded design and is reinforced with a cross tube. The larger excavator boom has a narrow, tall arch design that is inherently strong, and uses a closed boxan average operating weight that ranges from 17,500 to 19,500 lbs. (7,938 to 8,845 kg), and gross power of 83 to 98 hp (62 to 73 welded approach with fewer com- With kW), the BL60B and BL70B were designed and built with power, strength, long life and cost saving efficiency in mind. ponents and welds, for durability and performance. The boom allows visibility into the trench, as well as latest D5D four cylinder 4.8 L Volvo increased, as has space around the excavator ments — a vast range of solutions. Service and daily maintenance are made enabling closer proximity to the truck for engines, with direct injection and turbo mechanical controls or pilot towers, making loading. The cast iron kingpost offers flexi- charging. These high torque, fuel efficient the position change between loader and easy with the B-Series, with a one piece liftengines meet the requirements of the Tier III excavator easier and more convenient. ing hood and filters/service points all bility of movement and swing. emissions legislation. The torque converter There also is a larger area to store personal grouped together at ground level. Fewer on these machines is one of the largest in the items. The seat, steering controls and instru- greasing points and long greasing intervals Control in Your Hands Compared to previous models, the new industry and has enhanced peak torque and ments are all designed to lower fatigue and also help to increase uptime. A tilting oil cooler in front of the radiator makes cleanBL60B and BL70B feature new controls. torque rise. A differential lock on the rear keep operators alert and in control. The machines are fitted with two floor- axle is engaged via a foot switch on the side Comfort can be increased further with a ing both the cooler and the radiator quick mounted ergonomic levers that give opti- of the brake pedal and provides maximum multi-adjustable steering column and high and easy. mum grip for the operator’s hand move- rear wheel grip over slippery surfaces. performance heating and cooling systems. Both the loader and excavator benefit A 30 percent increase in glass area comGenuine Service ments when operating the excavator. The Volvo Construction Equipment provides right lever is fitted with a horn for safety, and from flow sharing hydraulics that enable bined with narrow pillars and a sloping the left lever can have an optional fingertip multi-functioning for efficient and smooth hood design allow added visibility. much more than a vast range of attachments button. This button controls the two-way operation. The BL70B features load sensing Visibility is enhanced outside the cab by and genuine service and maintenance products. Advanced machines need support in auxiliary hydraulic line required when using hydraulics that constantly adapt to the needs of the job at hand. With oil delivery that adjustable standard-fit halogen work lights order to maximize uptime, productivity and double acting excavator attachments. Fitted with either 16.5 or 18-in. (42 or matches the required force, there is always and internally by a large cab dome light for resale values. A wide range of service plans are available, as are analysis and diagnostics 45.7 cm) front tires, these machines have a the speed and power required for all safer entry and exit of the cab. tools. small turning radius and are extremely hydraulic functions. In applications such as Tools for Every Job Both models have gone through rigorous maneuverable, as well as easier to position load and carry, where speed is important, Both ends of the machine can be testing to ensure they measure up to the on site. Helped by a new cast bucket linkage the system efficiently delivers the required equipped with versatile, easy-to-use attach- daily challenges of a variety of jobs, includdesign, the bucket can rotate 205 degrees — flow. ments and quick couplers. B-Series backhoe ing deep trenching, heavy lifting, loading, allowing vertical digging in all positions loaders can be configured with general or craning and roading, according to the manImproved Care Cab without repositioning the machine. Boasting 15 percent more space than multi-purpose loader buckets, pallet forks, ufacturer. For more information, call 828/650-2000 Delivering the Power before, the room between the operator’s seat hydraulic thumb, standard and heavy-duty The BL60B and BL70B both include the and the left side of the cab has been excavator buckets, hydraulic breaker attach- or visit www.volvo.com.

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 11, 2012 • Page 25

Tough Breakers Powerful, Reliable and Easy to Own Models up to 12,000 ft lbs Designed and built in Germany In line power control valve Hybrid technology (gas /oil) Energy recovery Vibro Silenced recoil box Oversized pistons

Put us to the test on your job!

Contact Greg Petherbridge at greg.petherbridge@cp.com or call (216) 816-4834

www.cp.com

People. Passion. Performance.

Page 26 • August 11, 2012 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com 6715 W. Reno Oklahoma City, OK 73137 800/375-3339 Fax: 405/787-5973 12321 E. Pine St. Tulsa, OK 74116 800/375-3733 Fax: 918/437-7065 1629 Vision Dr. Abilene, TX 79602 877/577-5729 3922 I-40 East Amarillo, TX 79103 800/283-1247 8505 So Central Expwy Dallas, TX 75241 800/753-1247 1450 NE Loop 820 Fort Worth, TX 76106 877/851-9977 3201 E Slaton Rd Lubbock, TX 79404 866/289-6087 7301 East I-20 Odessa, TX 877/794-1800 432/333-7000

16 CHART from page

Model

JCB 1CX MIDI 2CX 12 3CX 14 3CX 15 3CX 17 4CX 14 4CX 15 4CX 17

Loader SAE HP (kw) 50 (37) 50 (37) 75 (56) 92 (69) 100 (75) 100 (75) 100 (75) 100 (75) 100 (75)

NEW HOLLAND B90B B95C B110C B115B

VOLVO BL60B BL70B

95 (71) 97 (72) 110 (82) 110 (82)

78 (58) 90 (67)

Loader Loader rce Life Capacity Breakout Fo) lbs. (kg lbs. (kg) 1,345 (610) 3,478 (1,578) 4,850 (2,200) 7,670 (3,480) 10,255 (4,650) 10,225 (4,630) 10,255 (4,630) 10,255 (4,630) 10,255 (4,630) 7,690 (3,488) 8,095 (3,672) 7,925 (3,595) 7,464 (3,386)

6,239 (2,830) 7,319 (3,320)

Backhoe Loading Height ft. (m)

5,179 (2,350) 5,830 (2,644) 7,935 (3,600) 13,603 (6,170) 14,498 (6,575) 14,498 (6,575) 13,730 (6,228) 16,387 (7,433) 16,387 (7,433) 14,454 (6,556) 15,212 (6,900) 14,109 (6,400) 12,169 (5,520)

10,903 (4,946) 12,454 (5,649)

8.2 (2.5) 9.0 (2.7) 10.9 (3.3) 11.2 (3.4) 13.0 (4.0) 14.3 (4.4) 11.2 (3.4) 13.0 (4.0) 14.3 (4.4)

Max Digging Depth ft. (m) 8.3 (2.5) 10 (3.0) 12 (3.7) 14.6 (4.5) 16.3 (5.0) 17.6 (5.4) 14.6 (4.5) 16.3 (5.0) 17.6 (5.4)

12.0 (3.67) 12.0 (3.67) 12.7 (3.87) 12.11 (3.69)

14.4 (4.4) 14.4 (4.4) 15.3 (4.7) 15.0 (4.6)

12.3 (3.7) 12.3 (3.7)

14.6 (4.5) 14.9 (4.4)

Travel Speed 4th Gear Fwd MPH (kmh) 7.0 (11.3) 17.4 (28.0) 21.3 (34.3) 22.5 (36.0) 22.5 (36.0) 22.5 (36.0) 22.2 (35.7) 22.2 (35.7) 22.2 (35.7)

Operating Weight lbs. (kg) 6,150 (2,790) 8,421 (3,820) 12,329 (5,592) 15,439 (7,003) 17,037 (7,728) 17,515 (7,945) 16,446 (7,462) 17,579 (7,973) 17,782 (8,066)

20 (32.2) 20 (32.2) 20 (32.2) 24 (39.2)

15,677 (7,111) 16,416 (7,446) 16,526 (7,496) 18,289 (8,296)

22.0 (35.4) 21.1 (34.0)

15,410 (6,900) 16,777 (7,610)

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 11, 2012 • Page 27

Case Updates N Series, Earns Tier IVi Certification

A VERSATILE INVESTMENT

TOOLS FOR EARTHMOVING LOADER BACKHOES

The Case 580N, 580 Super N, 580 Super N Wide Track and 590 Super N loader/backhoes now feature 3.4-L, turbocharged engines, ranging from 78 hp (58 kW) in the 580N to 108 hp (80 kW) in the 590SN.

Case Construction Equipment recently introduced a variety of improvements to its N Series loader/backhoe product line. The upgrades include the application of cooled exhaust gas recirculation (CEGR) emissions-control technology to achieve Tier IV Interim certification, as well as important improvements in performance, productivity and maintainability. The Case 580N, 580 Super N, 580 Super N Wide Track and 590 Super N loader/backhoes now feature 3.4-L, turbocharged engines, ranging from 78 hp (58 kW) in the 580N to 108 hp (80 kW) in the 590SN. The Tier IV Interim-certified engine — with CEGR technology — burns cleaner while delivering superior horsepower, faster response and up to 4-percent better fuel efficiency under load, according to the manufacturer. Other new standard N Series features include automatic ride control on fourwheel-drive models that engages at roading speeds to help reduce bucket spillage; and remote hydraulic test ports that allow easy, ground level access for service diagnosis to

keep the machine up and running, reducing the expense associated with downtime. Case also added a standard panel of dipper teeth on the bottom surface of the dipper, along with an optional extension/replacement pack that can expand the area of the dipper covered with serrated teeth. The dipper teeth enable the operator to secure unusually shaped or oversized pieces of debris or rock by pinning those objects against the dipper with the bottom of the bucket. The dipper teeth not only provide control of materials being moved, but they also protect the dipper from excessive wear. Attachments Add Value Case offers a range of attachments for the N Series loader/backhoes, including a new hydraulic thumb, hammers, brooms, forks, augers and rakes. Case also provides cabactivated hydraulic backhoe quick-coupler, hand-held hydraulics and loader quick-coupler options. For more information, visit www.casece.com.

Put TEREX loader backhoes on the job and ROI is a given. Designed to speed cycle times, our highly-productive machines boast 5 degrees more fill capacity and 13 degrees better discharge over competitive units. Ruggedly reliable, they tackle rough terrain with ease, offering 19.5 inches of ground clearance versus the competition’s 15 inches. Meanwhile, the widest stabilizer spread and narrowest boom in the industry keep operators grounded and focused on the job at hand. For more information on TEREX products, contact:

Hlavinka Equipment Co. h l a v i n k a @ h l a v i n k a . c o m • w w w. h l a v i n k a . c o m

East Bernard, TX 77435 979/335-7528 Rosenberg 281/342-5527

El Campo 979/543-3301 Bay City 979/245-4630

Nome 409/253-2244 Tivoli 361/286-3571

www.terex.com

Page 28 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page• www.constructionequipmentguide.com 1 CONSTRUCTION EQUIPMENT GUIDE • August 11, 2012 • Page 29

DRILLING EQUIPMENT Est. 1977

DUAL ROTARY RIGS IR • Soilmec • Lead System FOUNDATION RIGS Watson 2500 • 3000 • 3100 LDH 60’s & 80’s OTHERS AVAILABLE Crane Mt. • Low Clearance Air & Mud Hammers • Bits • Drill Rod Casing & Tooling up to 144” DUAL ROTARY DRIVES Built For Your Rig 4”-36” OD Pipe

800-691-9166 www.verticaldrill.com

it’s not ’s fau ault

by TheShelterPet Project.org

FOUR SEASONS EQUIPMENT INC. Houston TX 281/807-9777 Fax: 281/807-1233 Dallas TX 214/388-1700 Fax: 214/388-0107

San Antonio TX 210/667-1285 Fax: 210/667-2169 Lake Charles LA 337/626-6000 Fax: 337/626-7600

Page 30 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ASK

ABOUT OUR FINANCING

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 11, 2012 • Page 31

You Can’t Beat The System.

CALL FOR A

No other company offers such an easy-to-use system for horizontal directional drilling. The complete package. Directional drills. Trackers. Fluid management systems. All designed to work together to simplify drilling and backreaming through some of the toughest conditions. For details, see your dealer or visit ditchwitch.com.

FREE DEMO

Your Window To The Underground. Like real estate, underground construction is all about location, location, location. With electronic locators like the 830R/T and the 2450GR ground penetrating radar, you can quickly locate buried telephone, CATV, power, gas and water lines. Ask your dealer about the complete line of Ditch Witch®utility locators, or visit ditchwitch.com.

ditchwitch.com

Witch Equipment Co., Inc. Witch Equipment Co., Inc. Fort Worth, TX | 817-429-4824 Fort Worth, TX | 817-429-4824

Ditch Witch of Oklahoma Ditch Witch of Oklahoma Edmond, OK | 405-348-4633 Edmond,Tulsa, OK |OK 405-348-4633 | 918-438-1560

Witch Equipment Co., Inc. Witch Equipment Co., Inc. Hewitt, TX | 254-666-3344 Hewitt, TX | 254-666-3344

Ditch Witch of New Mexico, Inc. Ditch Witch of East Texas Albuquerque, NM | 505-345-1888 Tyler, TX | 903-592-6226

Ditch Witch of East Texas Ditch Witch Southwest Tyler, TX |TX 903-592-6226 Lubbock, | 806-745-6866 Odessa, TX | 432-617-8351

Ditch Witch Southwest Lubbock, TX | 806-745-6866

Ditch Witch of Tulsa Ditch Witch of Arkansas Tulsa, OK 918-438-1560 Springdale, |AR | 479-419-9771

Ditch Witch of Arkansas Ditch Witch of Arizona Benton, AR |AZ 501-316-3200 Phoenix, | 602-437-0351

Ditch Witch of Arkansas Ditch Witch of Arkansas Springdale, AR | 479-419-9771 Benton, AR | 501-316-3200

Ditch Witch of Southern Arizona Phoenix, AZ | 602-437-0351 Tucson, AZ | 520-579-0261

Ditch Witch of Arizona

Ditch Witch of Southern Arizona Ditch Witch of Houston Tucson, AZ | TX 520-579-0261 Houston, | 713-462-8866 Ditch Witch of Houston

Ditch Witch of New Mexico, Inc. Houston, TX | 713-462-8866 Albuquerque, NM | 505-345-1888

Page 30 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ASK

ABOUT OUR FINANCING

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 11, 2012 • Page 31

You Can’t Beat The System.

CALL FOR A

FREE DEMO

ditchwitch.com

Witch Equipment Co., Inc. Witch Equipment Co., Inc. Fort Worth, TX | 817-429-4824 Fort Worth, TX | 817-429-4824

Ditch Witch of Oklahoma Ditch Witch of Oklahoma Edmond, OK | 405-348-4633 Edmond,Tulsa, OK |OK 405-348-4633 | 918-438-1560

Witch Equipment Co., Inc. Witch Equipment Co., Inc. Hewitt, TX | 254-666-3344 Hewitt, TX | 254-666-3344

Ditch Witch of New Mexico, Inc. Ditch Witch of East Texas Albuquerque, NM | 505-345-1888 Tyler, TX | 903-592-6226

Ditch Witch of East Texas Ditch Witch Southwest Tyler, TX |TX 903-592-6226 Lubbock, | 806-745-6866 Odessa, TX | 432-617-8351

Ditch Witch Southwest Lubbock, TX | 806-745-6866

Ditch Witch of Tulsa Ditch Witch of Arkansas Tulsa, OK 918-438-1560 Springdale, |AR | 479-419-9771

Ditch Witch of Arkansas Ditch Witch of Arizona Benton, AR |AZ 501-316-3200 Phoenix, | 602-437-0351

Ditch Witch of Arkansas Ditch Witch of Arkansas Springdale, AR | 479-419-9771 Benton, AR | 501-316-3200

Ditch Witch of Southern Arizona Phoenix, AZ | 602-437-0351 Tucson, AZ | 520-579-0261

Ditch Witch of Arizona

Ditch Witch of Southern Arizona Ditch Witch of Houston Tucson, AZ | TX 520-579-0261 Houston, | 713-462-8866 Ditch Witch of Houston

Ditch Witch of New Mexico, Inc. Houston, TX | 713-462-8866 Albuquerque, NM | 505-345-1888

Page 32 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Gov. Contractors Recognized for Quality Performance Kirby-Smith Machinery Inc. was honored by DLA Land and Maritime, Columbus, Ohio, as one of the government’s best suppliers at an award ceremony held June 13, 2012, at the Hyatt Regency Ballroom, in Columbus, Ohio. David Baker, VP product support — Kirby-Smith Machinery Inc. accepted the Silver Award from Brig. Gen. Darrel K. Williams, the DLA Land and Maritime Commanding General. This recognition means the firm has supplied a product the government can be confident in using. Firms that qualify as automated best value system award winners have met the stringent quality and delivery requirements established by the Defense Logistics Agency. The ABVS, a computerized system, collects a vendor’s past performance data and translates it into a numeric score, ranging from zero to 100. David Baker, VP product support — Kirby-Smith Machinery Inc. accepted the Silver Award from Brig. Gen. Kirby-Smith Machinery Inc. Darrel K. Williams, the DLA Land and Maritime Commanding General.

supplies construction equipment parts for the Department of Defense and other agencies. To be eligible, vendors must have shipped 50 or more contract line items during a 12-month period. To qualify for a Gold Award, a contractor must have a perfect score of 100. A score of 99 to 99.99 earns a Silver Award and 98.9 earns a Bronze Award. DLA Land and Maritime, formerly known as Defense Supply Center Columbus, is known to more than 25,000 military and civilian customers. DLA Land and Maritime, field activity of DLA, which has its headquarters in Fort Belvoir, Va., teams with more than 6,000 suppliers of Land and Maritime weapon systems parts. More than 7 million orders are processed annually and sales are about $5 billion per year.

‘The Road Connection’ Pays Visit to AEM’s Headquarters Before heading to La Crosse, Wis., to participate in the annual Road Machinery and Supplies motorcycle rally, The Road Connection team made a stop in Milwaukee, Wis., to visit campaign supporters at the Association of Equipment Manufacturers (AEM) office. During their time at AEM headquarters, The Road Connection team had an opportunity to speak with the president of AEM, Dennis Slater, and a member of the AEM public relations team, Jordanne Kann-Helle. Since long-term legislation was passed earlier in the month, the two organizations discussed how their messaging has changed since the President signed MAP-21 into law on July 6, 2012. Both The Road Connection and AEM believe that although this is a step in the right direction for the construction industry, the 27 months of funding doesn’t provide a permanent solution for contractors counting on these federally funded projects. “We are pretty excited about the passage The Road Connection receives a warm welcome from the AEM staff during their visit to Milwaukee. of the bill,” said Slater. “However, at the same time, it’s a two year bill, a stop-gap measure, and a lot tion, and to be cognizant that two years will be here quickly. short-term extensions once the bill expires. From Milwaukee, The Road Connection truck heads to has to be done in the next two years to get ready for the next The team will continue an aggressive letter-writing campaign to lawmakers in Washington, D.C., applauding them La Crosse, Wis., and Riverside, Iowa, before heading to the bill.” The Road Connection continues to take its message to the for their work on passing a highway bill, but urging them to annual motorcycle rally in Sturgis, S.D., on Aug. 4, 2012. For more information, visit www.theroadconnection.org. streets, urging the public to get informed on the new legisla- think ahead so that the industry does not have to rely on

Crescent City

395 139

101 299 89

Burney Eureka 299 Rio Dell

CALIFORNIA STATE EDITION

395

299 44

44 36

101

Leggett

395

Chico

Oroville

Fort Bragg Point Arena 20 1

80 Tahoe City Auburn 50 South Lake Sacramento Tahoe

101

70 5

Santa Rosa

505 80

395 49

680

San Francisco

Sonora

Berkley 580 Oakland 280

120 120

120

Modesto

880

San Jose

140

101 1

395 152

Madera

Santa Cruz Montery

Fresno

180

190

198 1

Death Valley Junction

King City Lucia

198

101 127 46

178 15

San Luis 33 Obispo Santa Maria

Bakersfield

Baker

395

Barstow

101 14

Ventura

Glendale San Bernadino Los Angeles Riverside Santa Monica Santa Ana 10 Palm Springs Long Beach 1

“The Nation’s Best Read Construction Newspaper… Founded in 1957.”

Santa Barbara

101

Oceanside

Your California Connection – Frank Strazzulla – 1-877-7CEGLTD – fstrazzulla@cegltd.com

San Diego 8

San Diego’s Hawthorne CAT Joins NorAm Network Hawthorne CAT, an authorized Caterpillar dealer headquartered in San Diego, Calif., now represents the NorAm 65E compact motorgrader from its nine locations in San Diego and Hawaii. Hawthorne will sell, rent and support the 65E at each branch location including their extensive network of CAT Rental stores — Hawthorne Rent-It Service. “We are very pleased to have Hawthorne CAT join our team,” said Eric Mueller, president of NorAm. “They have an extensive history and are very highly respected in their marketplace. Due to the addition of a number of Caterpillar dealers into our network, we now offer the CAT engine as an option to meet their customer requirements.”

Hawthorne will sell, rent and support the NorAm 65E motorgrader at each branch location including its extensive network of CAT Rental stores — Hawthorne Rent-It Service.

About NorAM NorAm Construction Equipment distributes the 65E compact motor grader. The product follows a rich 60-plus year heritage of compact graders originating with the Allis Chalmers model “D” in 1949. The machine continued to be the industry leader as the Fiatallis model 65B from the 1970’s through the 1990’s. NorAm Construction Equipment began marketing the machine in 1993 and has continually strived to update the unit to exceed current technical and performance standards while maintaining the traditional features that have made the machine a staple in the industry. Manufactured in America, the 65E is sold and serviced by more than 200 dealer locations throughout North America

and Australia. For more on the NorAM 65E motor grader visit http://www.noram65.com/noram_features.cfm. About Hawthorne CAT Hawthorne CAT is the authorized dealer for Caterpillar construction and power equipment in San Diego, Hawaii,

Guam, Saipan and American Samoa. Hawthorne sells, rents, provides parts and service and emission solutions to various industries including heavy construction, general building construction, earthmoving, excavation, landscaping, marine, paving, waste management and power generation. For more information, visit www.hawthornecat.com.

Final Major Freeway Link on $441M SR 905 Project Completed Caltrans joined elected representatives and local transportation officials July 17 to celebrate the completion of the last major segment of a new six-lane freeway on State Route 905, connecting the Otay Mesa Port of Entry to Interstate 805. “This is a vital project that will boost California’s economy by improving the efficient movement of international goods now and in the future as trade grows through the Otay Mesa Port of Entry,” said Caltrans Director Malcolm Dougherty.

Total imports and exports between California and Baja California, Mexico were $15 billion in 1995. Today, they total more than $36 billion, with 98 percent of this trade transported by trucks. In 2005, more than two million trucks passed through the California/Baja California border ports of entry, and the volume is expected to double by 2020. The entire SR-905 Project cost $441 million and constructed more than 6 mi. (9.6 km) of a new six-lane freeway in three phases beginning in 2005. It was among the first in the state to receive funding ($74 million) from the Recovery

Act. California has put more than $2.3 billion of its $2.6 billion in Recovery Act funding back into the state’s economy. This includes nearly 1,000 highway, local street and job training transportation projects. The project also received $85 million from Proposition 1B, a 2006 voter-approved transportation bond. To date, nearly $14 billion in Proposition 1B funds have been distributed statewide. The SR-905 Project was a partnership between Caltrans, the Federal Highway Administration, and the San Diego Association of Governments.

Page 34 • August 11, 2012 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide

Placer • Siskiyou • Shasta Butte• Marin • Solano • Sonoma • Calaveras • Tuolumne • Kern • Glenn • Nevada • Orange • San Diego • Riverside •California... Los Angeles • San Bernardino • Santa Cruz • Trinity • Stanislaus • Inyo • Imperial • Fresno • Mendocino • Santa Barbara • El Dorado • Yolo • Contra Costa • Merced • Marin • Placer • Siskiyou • Shasta Butte• Marin • Solano • Sonoma • Calaveras • Tuolumne • Kern • Glenn • Nevada • Orange • San Diego • Riverside • Los Angeles • San Bernardino • Santa Cruz • Trinity • Stanislaus • Inyo • Imperial • Fresno • Mendocino • Santa Barbara • El Dorado • Yolo • Contra Costa • Merced • Marin Placer • Siskiyou • Shasta Butte• Marin • Solano • Sonoma • Calaveras

‘Golden State’ Highway Lettings

The California Department of Transportation received bids for transportation-related improvement projects. Following is a list of some of the projects let. County: Los Angeles Contract Number: 07-250504 Location: In Los Angeles at Route 605 from Coyote Cr Bridge to N/B off Peck Road. Project: Inst mbgr and widen shoulder. Number of Working Days: 200 Contractors and Bid Amounts: • Modern Alloys Inc. — $1,203,676 • Highland Construction Inc. — $1,281,920 • Beador Construction Company Inc. — $1,414,700 • A P W Construction Inc. — $1,421,155 • Autobahn Construction Inc. — $1,431,280 • Powell Constructors Inc. — $1,564,680 • Excel Paving Company — $1,884,573 • J Fletcher Creamer & Son Inc. — $25,009,085 County: Manteca Contract Number: 10-0E6124 Location: On Route 99 from 1.4 mi. north of Lathrop Road to 0.4 mi. north of Arch Road. Project: French Camp Interchange (Phase 2). Number of Working Days: 495 Contractors and Bid Amounts: • Bay Cities Paving & Grading Inc. — $24,326,113 • RGW Construction Inc. — $24,785,528 • Desilva Gates Construction LP — $25,785,855 • OC Jones and Sons Inc. — $25,937,330 • Top Grade/George Reed JV — $27,478,865 • Myers and Sons Construction LP — $27,600,651 • Granite Construction Company — $27,647,993 • Teichert Construction — $27,756,673

Project: Replace damaged bridge railings. Number of Working Days: 160 Contractors and Bid Amounts: • Granite Construction Company — $1,385,592 • Souza Construction Inc. — $1,837,667 • R Burke Corporation — $1,924,629 • Whitaker Construction Group Inc. — $2,035,658 • Calportland Construction — $2,230,395 • Bugler Construction — $2,294,174 • American Civil Constructors West Coast Inc. — $3,237,006

County: Fresno Contract Number: 06-0M7304 Location: Near Coalinga from 1.8 mi. north of Tuolumne Avenue Overcrossing to 3.1 mi. south of Route 5/33 separation. Project: Install median barrier. Number of Working Days: 65 Contractors and Bid Amounts: • J Fletcher Creamer & Son Inc. — $2,128,017 • Modern Alloys Inc. — $2,154,763 • Midstate Barrier Inc. — $2,174,029 • A P W Construction Inc. — $2,198,836 • Coral Construction Company — $2,292,274 • C & W Construction Specialities Inc.— $2,580,464

County: Merced Contract Number: 10-415804 Location: Near Chowchilla from Chowchilla River Bridge to Buchanan Hollow Road. Project: Construct freeway and interchange. Number of Working Days: 500 Contractors and Bid Amounts: • Security Paving Company Inc. — $44,282,257 • Teichert Construction — $45,507,610 • Desilva Gates Construction LP — $46,913,093 • Emmett’s Excavation Inc. — $49,185,998 • W Jaxon Baker Inc. — $49,662,616 • RGW Construction Inc. — $50,700,949 • Flatiron West Inc. — $50,806,137 • Granite Construction Company — $52,075,880

County: Santa Barbara Contract Number: 05-1A9704 Location: Near Buellton at Nojoqui Creek Bridge No. 5175 R/L.

County: Monterey Contract Number: 05-1A6904 Location: About 15 mi. south of Carmel at 0.1 mi. south of

Rocky Creek Bridge and at 1.1 mi. south of Bixby Creek Bridge. Project: Construct viaduct. Number of Working Days: 595 Contractors and Bid Amounts: • Golden State Bridge Inc. — $10,875,539 • Whitaker Construction Group — $10,813,013 • Disney Construction Inc. — $11,197,829 County: Kern Contract Number: 06-0G2704 Location: Near Mojave at Business 58 West Overcrossing. Project: Concrete barrier and windscreen. Number of Working Days: 85 Contractors and Bid Amounts: • C A Rasmussen Inc. — $1,520,833 • Griffith Company — $1,549,451 County: Los Angeles Contract Number: 07-4Y1504 Location: At various locations in LA-1, LA-90, LA-405. Project: Bridge preservation. Number of Working Days:285 Contractors and Bid Amounts: • Peterson-Chase General Engineering Construction Inc. — $2,642,763 • J Mc Loughlin Engineering Company Inc. — $2,745,112 • Truesdell Corporation of California Inc. — $2,928,928 • Penhall Company — $3,555,306

Construction Equipment Guide Рђб California State Section Рђб www.constructionequipmentguide.com Рђб August 11, 2012 Рђб Page 35

WEРђЎVE GOT YOUR BACK(HOE). Whether you need a no-frills Рђюback-to-basicsРђЮ backhoe or a tool-carrier model loaded with industr y-exclusive TTo otal Machine Control (TMC) advantages, weРђЎve got a K-Series Backhoe IRU \RX &XVWRPHU LQVSLUHG HQKDQFHPHQWV LQFOXGH D IXHO HI кЪFLHQW (3$ ,QWHULP 7LHU ,7 (8 6WDJH ,,,% GLHVHO )LYH VSHHG WUDQVPLVVLRQ ZLWK $XWRVKLI W RSWLRQ &RPSOHWHO\ UHGHVLJQHG +9$& V\VWHP WKDW GUDPDWLFDOO\ LPSURYHV DLUкаRZ (FRQRP\ RSHUDWLQJ PRGH DXWR LGOH DQG DXWR VKXWGRZQ IRU PD[LPXP IXHO HI кЪFLHQF\ $QG D UHGHVLJQHG FRROLQJ V\VWHP IRU IDVWHU HDVLHU core clean-out. No matter what your needs, weРђЎve got your backhoe.

RDO EQUIPMENT CO. www.rdoequipment.com Flagstaff 5500 East Penstock Ave Flagstaff, AZ 86001 928-526-0639 Phoenix 2649 N 29 Ave Phoenix, AZ 85009 602-415-4700 Prescott 1091 Commerce Drive Prescott, AZ 86035 928-776-8300

PAPE MACHINERY

Tucson 5051 S Outlet Center Drive Tucson, AZ 85706 520-294-5262

Imperial 3275 Hwy 86 Imperial, CA 92251 760-355-4331

Pflugerville 16415 N IH-35 Pflugerville, TX 78660 512-272-4141

Lakeside 10108 Riverford Road Lakeside, CA 92040 619-270-4300

Irving 3230 East Airport Freeway Irving, TX 75062 972-438-4699

New Braunfels 19275 N IH-35 New Braunfels, TX 78132 830-632-3100

Riverside 20 Iowa Avenue Riverside, CA 92507 951-778-3700

Fort Worth 5301 Mark IV Parkway Fort Worth, TX 76131 817-566-1541

Laredo 5615 Hwy 359 Laredo, TX 78045 956-718-1909

Indio 83-300 Avenue 45 Indio, CA 92201 760-342-8900

Hewitt 215 Enterprise Blvd Hewitt, TX 76673 254-666-3900

www.papemachinery.com Newark 800-231-2060 510-790-3600 Fax: 510-790-9120 Sacramento 800-227-3399 916-922-7181 Fax: 916-922-4532 French Camp 800-619-6319 209-983-8122 Fax: 209-983-1105

Fowler 559-834-4774 Fax: 559-834-4754 Rohnert Park 800-325-9401 707-584-9161 Fax: 707-584-4786 Gilroy 800-848-4150 408-848-4150 Fax: 408-848-5163 Redding 530-241-4555 Fax: 530-241-0619

Page 36 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Authorized Bobcat Dealers

CALIFORNIA Bobcat of Cerritos

ONE VS MANY

COMPACT EXCAVATORS FACE OFF

Cerritos

s bobcatofcerritos.com

NEW MEXICO Tom Growney Equipment Albuquerque

Farmington

Hobbs

bobcat.growneyinc.com

NEVADA Northern Nevada Equipment Elko

northernnevadaequipment.com

OKLAHOMA White Star Machinery Tulsa

whitestarmachinery.com

TEXAS Bobcat of Dallas Lewisville

Longview

Fort Worth

bobcatofdallas.com

Bobcat of Houston Jersey Village

Pearland

Conroe

Scan the code. Watch the videos. See compact excavators go head to head.

bobcatofhouston.com

Tom Growney Equipment El Paso

Visit BobcatAdvantage.com/faceoff15 to see more and find out who comes out on top.

bobcat.growneyinc.com

Valley Ditch Witch Inc Corpus Christi

Harlingen

www.BobcatAdvantage.com/faceoff15 Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. ©2012 Bobcat Company. All Rights Reserved. | 0212421

bobcat.valleyditchwitch.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 11, 2012 • Page 37

Cash is king – Make more money & spend less with Hyundai 9 Series machines.

VALUE

• More Standard Features • Industry-Best Total Coverage Warranty • Hi-mate Remote Management service – FREE for 3 years • Industry-Leading Fuel Economy

3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty

NDA

Industry’s Best Total Coverage Warranty:

• Industry-Leading Cycle Times

R R A N

www.hyundaiamericas.com

CALIFORNIA

TEXAS

WASHINGTON

MecoM equipMent Stockton, CA 209-466-5135

ALVin equipMent Alvin, TX 281-331-3177

HeAVY equipMent SALeS Corona, CA 951-674-9999 Pacoima, CA 951-674-9999

Four SeASonS equipMent Dallas, TX 214-388-1700 Houston, TX 281-807-9777

Jet citY equipMent Oak Harbor, WA 360-675-4441 North Seattle, WA 360-651-9079 Wenatchee, WA 509-888-8181

Page 38 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Subway Project Texas Highway Panel Unearths Ancient Names Portion Road in Greece of Road as I-69 By Michael Graczyk ASSOCIATED PRESS

Photo courtesy of AP/Nikolas Giakoumidis

By Costas Kantouris ASSOCIATED PRESS

THESSALONIKI, Greece (AP) Archaeologists in Greece’s second-largest city have uncovered a 230-ft. (70 m) section of an ancient road built by the Romans that was the city’s main travel artery nearly 2,000 years ago. The marble-paved road was unearthed during excavations for Thessaloniki’s new subway system, which is due to be completed in four years. The road in the northern port city will be raised to be put on permanent display when the metro opens in 2016. The excavation site was shown to the public on June 25, when details of the permanent display project also were announced. Several of the large marble paving stones were etched with children’s board games, while others were marked by horse-drawn cart wheels. Also discovered at the site were remains of tools and lamps, as well as the bases of marble columns. Viki Tzanakouli, an archaeologist working on the project, told The Associated Press the Roman road was about 1,800 years old, while remains of an older road built by the ancient Greeks 500 years earlier were found underneath it. “We have found roads on top of each other, revealing the city’s history over the centuries,” Tzanakouli said. “The ancient road, and side roads perpendicular to it appear to closely follow modern roads in the city today.” About 23 ft. (7 m) below ground in the center of the city, the ancient road follows in roughly the same direction as the city’s modern Egnatia Avenue. The subway works, started in 2006, present a rare opportunity for archaeologists to explore under the densely populated city — but have also caused years of delays for the project. In 2008, workers on the Thessaloniki metro discovered more than 1,000 graves, some filled with treasure. The graves were of different shapes and sizes, and some contained jewelry, coins or other pieces of art. A massive excavation project also took place during the 1990s in the capital, Athens, before the city’s new metro system opened in 2000. Thessaloniki’s new subway is already four years behind schedule, due to the excavation work as well as Greece’s financial crisis. Thirteen stations will operate initially, before a 10-station extension is added later.

HOUSTON (AP) The Texas Transportation Commission has given the green light to a 35-mi. stretch of U.S. Highway 59 from Houston north to carry the designation as Interstate 69. The section of road — from Interstate 610 in Houston northeast through Montgomery County to just north of the Montgomery and Liberty County line — is the longest stretch of the much-debated I-69 in the state. It joins a 6-mi. portion near Corpus Christi along U.S. 77 as the only pieces of the newest interstate in Texas. Both were reconstructed in recent years to interstate highway standards. For some two decades, backers of the project have longed for an interstate highway that traverses the state from the northeast corner, through East Texas and Houston to South Texas and the Mexico border. The route roughly follows U.S. 59 from Texarkana south and southwest for 600 mi. and includes a split in South Texas into the Rio Grande Valley. No one knows when the overall project may be completed. New road signs with the familiar red, white and blue interstate crest will be going up, marking the newly designated piece of road as U.S. 59 and I-69, Texas Department of Transportation spokesman Mark Cross said July 30. “We do not anticipate having to go out and fabricate new signs,” Cross said. “We will change the emblems on existing signs and replace with new ones as needed.” Two more rebuilt segments of U.S. 59 from Houston to Sugar Land and Rosenberg in Fort Bend County are under Federal Highway Administration review to officially become pieces of I-69. The Transportation Commission also approved a $60 million project to upgrade to interstate standards 10 mi. of U.S. 77 between Corpus Christi and Kingsville in South Texas. According to the Alliance for I-69 Texas, a coalition of cities, counties and local groups along the route that have advocated for the highway, some 230 mi. of road already are at limited access interstate standards. “It is a great thing, it’s happening, but it’s just one project at a time,” John Thompson, the Polk County judge and chair of the alliance, said. “The red, white and blue shield is a very powerful tool in the economic development business, not just the practicality of relieving congestion and moving freight.” Money that was dedicated for the Interstate Highway System expired in the mid-1990s, making new projects more difficult, he said. “You’ve got to figure out how to piecemeal it,” Thompson said. “Absolutely it’s slow. If we had a big pot of money, it wouldn’t be.” In the early days of interstate construction, initiated in 1956 by President Dwight Eisenhower, there were fewer concerns about environmental impacts and land rights. Government money flowed and pavement was laid down. “Now we have a very rigid process and not the least of which is trying to figure out how to pay for it,” Thompson said.

WAUKESHA-PEARCE INDUSTRIES, INC. 12320 S. Main Houston, TX 77035 713-723-1050 Fax: 713-551-0798 Tomball, TX 281-351-9016 Kilgore, TX 903-984-2011 Port Arthur, TX 409-721-5305 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 San Antonio, TX 210-648-4444 Pflugerville, TX 512-251-0013 Buffalo, TX 903-322-4535 www.wpi.com

Komatsu Equipment Company 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557 3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334 6253 West Gilbert Industrial Court Hurricane, UT 84737 435-986-1000 10790 South Highway 59 Gillette, WY 82718 307-682-1445 Rock Springs, WY 307-686-1300

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 11, 2012 • Page 39

KIRBY-SMITH MACHINERY INC. 6715 W Reno Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065 Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826

COMPACT EXCAVATORS From Komatsu - The Compact Experts

Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000 www.kirby-smith.com

POWER MOTIVE CORPORATION 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Fax: 303-388-9328 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550 Milliken, CO 970-339-4098 www.powermotivecorp.com

ROAD MACHINERY LLC 4710A E. Elwood • Suite 6-7 Phoenix, AZ 85040 602-252-7121 Fax: 602-253-9690 Gilbert, AZ 480-545-2400 Tucson, AZ 520-623-8681 Prescott, AZ 928-778-5621 Albuquerque, NM 505-345-8383 Farmington, NM 505-324-8601 El Paso, TX 915-872-1001 Bakersfield, CA 661-695-4830

The Komatsu PC88MR-8 takes the power and quality reputation of its larger siblings into tight places. The advanced Pilot Proportional Control (PPC) joysticks provide smooth, precise controls and five working modes enable you to take command of every project. t Three track options for any terrain: rubber, steel and roadliner t Boom offset allows digging parallel to foundations or fences t Spacious and comfortable contour cab design for true tight-tail versatility t KOMTRAX wireless equipment-monitoring system with no monthly fees

Freemont, CA 510-659-1903 Perris, CA 909-355-3600 Redding, CA 530-229-3822 Sacramento, CA 916-375-3540 Cananea, Sonora, Mexico 011-52-6453328300 www.roadmachinery.com

www.komatsuamerica.com www.komatsuamerica.com

Page 40 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

“The feedback from our field personnel is simply this. We wish you would have purchased a Takeuchi sooner. The machine is comfortable to operate and is stout. A significant improvement over other mini excavators we’ve owned.”

“The Power is absolutely amazing on our Takeuchi Track Loader” Jon Wright J&S Contracting Osceola, WI

Joe Raucci – Vice President Southland Construction Inc Apopka, FL

Find out what others know. Visit takeuchi-us.com to find the dealer nearest you.

CLM Equipment Co., Inc.

Ditch Witch of East Texas

www.clmequipment.com

www.witchequipment.net

Baytown/Houston, TX 281/385-6633 Fax: 281/385-7106

Broussard/Lafayette, LA 337/837-6693 Fax: 337/837-2384

Sulphur/Lake Charles, LA 281/625-5942

7809 Hwy. 271 • Tyler, TX 75708 903/892-6226 • Fax: 903/535-9768

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 11, 2012 • Page 41

Ditch Witch of Oklahoma/Tulsa Edmond, OK 73034 405-348-4633 Tulsa, OK 74116 918-438-1560

Vermeer of Texas-Louisiana www.vermeertexas.com Alamo, TX 956-782-5580 Amarillo, TX 806-622-2407 Corpus Christi, TX 361-887-8499 Denham Springs, LA 225-665-7900 Waco (Ross), TX 254-829-9655 Irving, TX 972-255-3500 Houston (Cypress), TX 281-671-6000 Kilgore, TX 903-988-9868 Lubbock, TX 806-745-1245 Round Rock, TX 512-244-0505 San Antonio, TX 78219 210-337-7700

Paving

SECTION

Pages 42-49

JCB’s Double-Drum Ride-On Rollers Offer Productivity

The new rollers benefit from an improved drive system that delivers a 20 percent increase in vibration frequency, to 66Hz.

JCB Vibromax is introducing a range of double-drum ride-on rollers, delivering high frequency compaction with JCB reliability and serviceability. The VMT380 and VMT430 models are both available in two drum widths, creating four distinct machines. With modern styling, a frontmounted engine and JCB Vibromax’s tapered front frame design, they offer lower ownership costs with increased productivity and ease of use, according to the manufacturer. The four models are the VMT380-130, VMT380-140, VMT430-130 and the VMT430-140, and they feature: • A robust single-piece exciter shaft design for maximum reliability • Front-mounted engine with tapered frame for improved visibility and weight distribution • Maintenance-free center joint and improved service access • High frequency and high amplitude with multiple vibration options • Up to 5 percent fuel saving over previous models JCB Vibromax has redesigned its mid-weight ride-on roller range with a new frame, new engines, revised hydraulics and improved service access. Both the VMT380 and the VMT430 can be specified with either 51 or 55-in. (129 or 140 cm) wide drums. These rollers replace the pre-

Both the VMT380 and the VMT430 can be specified with either 51 or 55-in. (129 or 140 cm) wide drums.

vious VMT390 and VMT500 in the JCB compaction lineup. The new rollers benefit from an improved drive system that delivers a 20 percent increase in vibration frequency, to 66Hz, and for rolling speeds that are now up to 10 percent higher than the others. Gradeability has been improved by 42 percent, while all models use a mechanical gear shift for smoother starting and braking, according to the manufacturer. With a turning radius of 7.8 ft. (2.4 m) for the 51-in. drum machines and 8 ft. (2.4 m) for the 55 inch width models, the JCB Vibromax rollers offer 13 percent better maneuverability than others. Operators can now choose between singlefront, single-rear or twin drum vibration, for more control on smooth finish asphalt layers. New Operator Station With the engine moved to the front section of the chassis and the larger water tanks now rear-mounted, the VMT machines benefit from a totally new operator station. The ergonomic drive lever now comes with an integrated cutter control, and an optional second drive lever contributes to added versatility. JCB’s automatic vibration control (AVC)

system, which cuts off vibration when the roller stops traveling, remains a standard fit on all models. The machines have three working modes with a detented throttle control for three different frequencies. With less weight and a more efficient vibrator design, the rollers offer up to a 5 percent fuel saving over the previous machines, while a larger fuel tank provides 4 to 8 hours of additional working capability between refills, reducing downtime. The larger 64.7-gal. (245 L) water tank, which has a pressurized water delivery system, also permits longer working between refills. Service Access The sturdy locking engine cover is gas-strut assisted for easy access to the engine and drive system. All models benefit from a center articulation joint that is maintenance-free, cutting the requirement for 500 hour greasing intervals. A single-piece exciter shaft also calls for less maintenance and lubrication, reducing service costs. In the event of a breakdown, the VMT models also have a towing pump installed, allowing the rollers to be pulled out of the working area for repair. For more information, visit www.jcb.com.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 11, 2012 • Page 43

Chicago Pneumatic Tampers Deliver High Productivity

The Worldwide Leader in Concrete Paving Technology

info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ THE WORLDWIDE LEADER IN CONCRETE PAVING TECHNOLOGY ❘ 800-831-2320

6715 W. Reno • OKLAHOMA CITY, OK 405-495-7820 • Fax: 405-787-5973 www.kirby-smith.com

12321 E. Pine St. • TULSA, OK 918-438-1700 • Fax: 918-437-7065

LB Performance Launches RW-35A Utility Road-Widener Equipped with powerful engines, efficient carburetors and high-capacity air filters, Chicago Pneumatic tampers range in weight from 137 lb. (64 kg) to 185 lb. (84 kg).

Chicago Pneumatic Tampers are designed to deliver fast, hard-hitting power that leads to high productivity for operators. Equipped with powerful engines, efficient carburetors and high-capacity air filters, Chicago Pneumatic tampers range in weight from 137 lb. (64 kg) to 185 lb. (84 kg). Honda engines drive both the Chicago Pneumatic MS 620, one of the fastest pieces of compaction equipment on the market, and the powerful MS 680, which provides the consistent, hard-hitting power typically associated with bigger machines, according to the manufacturer. “It jumps more than it runs,” said Eudes Defoe, product manager handheld tools North America of Chicago Pneumatic Construction Equipment. “Our MS tampers

were constructed to enhance productivity on the job site.” The MS 840, the largest and strongest tamper in the Chicago Pneumatic MS line, has the best compaction capability and its Hatz diesel engine provides extra force. The interchangeable bottom plates are 9 in. (23 cm) wide on the smallest unit and 11 in. (28 cm) wide on the other models. All Chicago Pneumatic tampers offer low fuel consumption and reduced exhaust emissions. These tampers also are designed with an extra strong metal frame and efficient shock absorbers. These features provide operators with good traction and allow for fast, easy handling, according to the manufacturer. For more information, visit www.cp.com.

LB Performance Paving Products’s RW-35A road widener is powered by a 35-hp (26 kW) Kubota Tier IV Stage 111A diesel engine. It widens up to 4 ft. (1.2 m) using a variety of construction materials and is simple to operate. Its towable feature eliminates normal trailering requirements. This compact model is easy to service and has design features from larger roadwideners manufactured by LBP, according to the manufacturer. For more information visit www.LBPerformancePaving.com.

Page 44 • August 11, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

BEE EQUIPMENT SALES, LTD

KIRBY-SMITH MACHINERY, INC.

HI-WAY EQUIPMENT CO.

NIXON-EGLI EQUIPMENT COMPANY

www.beeequipmentsales.com Lubbock TX • 806/745-1511

www.kirby-smith.com Oklahoma City, OK • 800/375-3339 Tulsa, OK • 800/375-3733 Kansas City, KS • 877/851-5729

www.hiwayequip.com Houston, TX • 713/649-0940 Beaumont, TX • 409/212-8100 Brenham, TX • 979/836-6641 Bryan, TX • 979/779-8942

www.nixon-egli.com 800 E. Grant Line Rd. • Tracy, CA 95304 209/830-8600 • 209/830-8884 2044 S. Vineyard Ave. • Ontario, CA 91761 909/930-1822

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 11, 2012 • Page 45

RDO EQUIPMENT CO. www.rdoequipment.com Riverside, CA 800/494-4863 Indio, CA 760/342-8900 Imperial, CA 800/464-4331 Lakeside, CA 619/270-4300 Fort Worth, TX 800/551-4905 Hewitt, TX 800/551-8258 Irving, TX 800/437-6342 Laredo, TX 956/718-1909 Pflugerville, TX 512/272-4141 New Braunfels, TX 800/880-0880 Ehrenberg, AZ 928/923-9611 Flagstaff, AZ 928/526-0639 Phoenix, AZ 602/415-4700

WHILE SOME PEOPLE ARE HAVING A PROBLEM GRASPING THE CONCEPT, THEY’RE SURE NOT HAVING ANY DIFFICULTY GRABBING THE RESULTS.

Prescott, AZ 928/776-8300

It’s a rubber tire roller that vibrates with enough centrifugal force to equal the output of a 55,000 pound pneumatic. The GW750 handles the toughest HMA mixes with ease, getting balanced high densities from the top through the bottom of the mat. Great on SMA, too! And it provides a sound interlock between new overlays and profiled surfaces. It’s bonus time!

Tucson, AZ 520/294-5262 Wellton, AZ 928/785-4276 www.sakaiamerica.com | 1-800-323-0535

Check one out at your Sakai dealer today.

Yuma, AZ 928/341-7100

POWER MOTIVE CORP.

Colorado Springs, CO 719/576-5541

8111 Mills Road, Houston, TX 77064 281/807-9777 • Fax: 281/807-1233

www.powermotivecorp.com 5000 Vasquez Blvd., Denver, CO 80216 303/355-5900 • Fax: 303/388-9328

Milliken, CO 970/587-1188

1425 Swisco Road, Lake Charles, LA 70665 337/626-6000 • Fax: 337/626-7600

Grand Junction, CO 970/241-1550

Durango, CO 970/259-0455

FOUR SEASONS EQUIPMENT

Page 46 • August 11, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Terex SF3502C Slipform Paver Sets Standard for Smoothness Featuring 26-in. (66 cm) main frame tubing, the Terex SF3500C concrete slipform paver from Terex Roadbuilding delivers structural rigidity at extended paving widths. The paver’s Series 6 paving kit boasts a proprietary wedge and pin locking system and unique vibration manifold mounting, enabling contractors to change paving widths in a matter of hours, not days, to dramatically improve paving efficiency, according to the manufacturer. Single-point main-frame telescoping from one side of the tractor offers half the potential flex points of other pavers and prevents machine deflection. Hydraulically controlled main frame extenders allow the telescoping extension to be quick-

ly extended and retracted to reduce width change time and optimize paving efficiency. Offering up to an 8-ft. (2.4-m) extension, the two-track SF3502C slipform paver offers standard paving widths ranging from 12 to 26 ft. (3.7 to 7.9 m) and a maximum 34-ft. (10.4-m) width, making it the paver choice for highway, industrial and airport concrete construction. With its “Strongbox” design, the Terex Series 6 paving kit is 55 percent stronger than traditional Terex slipform paving kits. It features a finishing zone of 60 in. (152.4 cm) to improve surface smoothness. A two-phase manufacturing process is used for precision milling of kit segment sides and

Offering up to an 8-ft. (2.4-m) extension, the two-track SF3502C slipform paver offers standard paving widths ranging from 12 to 26 ft. (3.7 to 7.9 m) and a maximum 34-ft. (10.4-m) width.

bottoms, assuring a tight fit between segments without spacers and enhancing extrusion surface smoothness to improve finish quality. Vibrator manifolds mount directly to the paving kit with quick disconnects, reducing vibrator hose length and saving contractors money. With only eight hose connections between the kit and tractor at a 24-ft. (7.3-m) paving width, this low density hydraulic plumbing design helps to reduce the time it takes to make a width change, according to the manufacturer. Several design features improve operator visibility and performance with the SF3502C slipform paver. Its low-rise engine compartment enhances the operator’s field of vision to the slab behind the paver. See-through walkway grates give the operator a better view of the head of material in front of the paving pan. A “no-clutter” deck design allows the operator to move freely along the tractor’s telescoping walkways. For optimum floatation, traction and stability, the SF3502C offers a standard 12-ft. (3.7-m) long by 16-in. (40.6 cm) wide triple-grouser street shoes. A dual-range propel system offers a variable hydrostatic paving speed range up to 35 ft. (10.7 m) per minute and a travel range up to 83 ft. (25.3 m) per minute. The SF3502C paver is powered by a 350-hp (261-kW), Tier III and Stage IIIA diesel engine. The engine compartment is sound-insulated to reduce noise levels and improve operator comfort. The hydraulically actuated engine cowling increases ease of access to components for servicing. For more information, visit www.terex.com.

Visit CEG’s Web Site at DALLAS

SAN ANTONIO

469-586-2900

210-648-3531

www.nicholsroadbuilding.com

www.Construction EquipmentGuide.com

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 11, 2012 • Page 47

KIRBY-SMITH MACHINERY INC. www.kirby-smith.com 6715 W. Reno Oklahoma City, OK 800-375-3339 Tulsa, OK 918-438-1700 Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600 Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826 Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000

ALL FROM A SINGLE SOURCE: THE WORLD’S #1 BRANDS FOR ROAD BUILDING.

COOPER EQUIPMENT CO. 17474 Judson Rd. San Antonio, TX 210-657-5151

NUECES POWER EQUIPMENT www.nuecespower.com Corpus Christi, TX 361-289-0066 Edinburg, TX 956-702-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 Vinton, TX 915-541-0066

HI-WAY EQUIPMENT CO. www.hiwayequip.com 926 N. Sam Houston Pkwy E. Houston, TX 77032 281-987-1990 Beaumont, TX 409-212-8100 Brenham, TX 979-836-6641 Bryan, TX 979-779-8942 Houston, TX North - 281-987-1990 South - 713-649-0940

MODERN MACHINERY

Rely on the Wirtgen Group’s full range of products for new construction and rehabilitation of roads. Our sales and service experts, based close to your doorstep, offer the expertise and all-round support you need.

www.wirtgenamerica.com

ROAD TECHNOLOGIES ROAD MACHINERY www.roadmachinery.com Phoenix, AZ 602-252-7121 Ray, AZ 520-363-5168 Gilbert, AZ 480-545-2400 Tucson, AZ 520-623-8681

Prescott, AZ 928-778-5621 Albuquerque, NM 505-345-8383 Farmington, NM 505-324-8601 Bakersfield, CA 661-695-4830

El Paso, TX 915-872-1001 Superior, AZ 520-689-2405 Perris, CA 909-355-3600

HONNEN EQUIPMENT CO. www.honnen.com West Sacramento, CA 916-375-3540 Redding, CA 530-229-3822 Fremont, CA 510-659-1903

5055 E. 72nd Ave. Commerce City, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090

Salt Lake City, UT 801-262-7441 Ogden, UT 801-627-0049 St. George, UT 435-652-8003

Casper, WY 307-266-4474 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284

www.modernmachinery.com Spokane, WA 800-541-0754 Kent, WA 800-669-2425 Rochester, WA 800-304-4421 Portland, OR 800-950-7779 Eugene, OR 800-826-9811 Boise, ID 800-221-5211 Pocatello, ID 800-829-4450 Missoula, MT 800-332-1617 Kalispell, MT 800-434-4190 Billings, MT 800-735-2589

NIXON-EGLI EQUIPMENT COMPANY www.nixon-egli.com 800 E. Grant Line Rd. Tracy, CA 95304 209-830-8600 209-830-8884 2044 S. Vineyard Ave. Ontario, CA 91761 909-930-1822

Page 48 • August 11, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 11, 2012 • Page 49

3517 Wayne White Rd., Climax, NC 27233

866-430-7539

jfwequip@aol.com www.jfwequipment.com 1998 Etnyre K Chip Spreader, 9-18’ extendable spread hopper, 4 wheel drive, computerized, hydrostatic drive, Cummins 8.3L diesel engine

1996 Etnyre S-2000 Distributor, 3200 gallons, computer w/1’ cut-offs, diesel heat, 18’ spray bar, front mount pump, Mack U truck, Mack 300 diesel engine, Mack 7 spd trans, air brakes

2004 Ford 750XL Water Truck, Cat C7 diesel engine, automatic transmission, air brakes, with 2007 Diversified water tank, 2350 gallons, 2 front & 2 rear spray heads, hose & reel, box with intake hose on back

Warren GS87 & GS84 Tailgate Spreader, designed to mount on standard dump bodies, manual feed-gate control, eight one-foot sections for spread width adjustment, operator’s platform with safety rail.

2002 Ingersoll Rand DD24 Double Drum 47” Vibratory Roller, Kubota diesel engine, OROPS, water system, scrapers

1975 Blaw Knox RW 195 Road Widener, 4 wheel drive, 14’ widening, 2-3’ hyd. Ext.

2003 Hypac C530AH 9 Wheel Rubber Tire Roller, Cummins 3.3L diesel engine, co-co mats, water system, canopy

2011 Marathon KERA10 Walk Behind Crack Sealer, 10 gallon material vat, full wrap around oil jacket, manual full sweep agitation

2001 Ingersoll Rand DD70HF Double Drum 57” Vibratory Roller, high frequency, (7 1/2 tons), Cummins diesel engine, canopy, water system, drum scrapers

Serving Serving the the Asphalt Asphalt Industry Industry for for 25 25 Years Years

Page 50 • August 11, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS Atlantic Crane Inspection Services Visit us at www.atlanticcrane.com

AERIAL LIFTS Manlifts

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days v2 16:40 4/12/00 GS 65 Ad runs for 2 (two) insertions - no changes in second insertion. 117543 HORAN NO.

FORKLIFTS Industrial Forklifts