West 21 2014 by Construction Equipment Guide

$3.00

Published Nationally ®

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Western Edition

www.constructionequipmentguide.com

October 18, 2014 • Vol. IX • No. 21 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

Inside

Pennington Cuts Ribbon on $31M Centerpiece By Lori Tobias CEG CORRESPONDENT

After three years of construction, Pennington County, South Dakota, is ready for the October ribbon cutting on the centerpiece of a multiphase project that includes an expanded parking garage, a new criminal evidence building and a $31 million, 100,00 sq. ft. administration center. The new building project was bid in April 2012 — a time when the economic downturn was being keenly felt. Construction project manager

Nati onal Dealers Flock to Annual Conference...16

Efficiency Shoring Hosts Texas Open House...40

Attachments Section ............ ...................................... 9-13 Truck & Trailer Section ........ ......................................23-25 Recycling Section ........31-39 Auction Section ..........43-51 Business Calendar ............44 Advertisers Index ..............50

see PROJECT page 46

Industry Employment, Spending Increase

Honnen Celebrates Utah Facility Opening...20

Table of Contents ................4

Mike Kuhl believes the timing was fortuitous for everyone. “It did create a very good bidding environment for us,” Kuhl said. “We hoped that we would get a local contractor, but we did not rate bids in terms of selecting a local contractor. It just worked out that way. At the time local contractors were looking for work and we were pretty confident we would get a local contractor.” The county also was able to take advantage of some special federal government bonding programs that

The administration building is constructed of brick and precast concrete and features significant glass curtains.

Construction employment expanded in 220 metro areas, declined in 73 and was stagnant in 46 between August 2013 and August 2014, according to a new analysis of federal employment data released by the Associated General Contractors of America. Association officials added that construction spending climbed to $961 billion from $915.3 billion between August 2013 and August 2014, a 5 percent increase, accord-

ing to federal data also released Oct. 1. “Even as construction employment continues to rebound in many parts of the country, other areas continue to lose ground, or like Phoenix, backslide,” said Ken Simonson, the association’s chief economist. “Similarly, while construction spending has been increasing overall in the past year, see INDUSTRY page 49

ELFA Reports Industry Confidence Up in Sept. The Equipment Leasing & Finance Foundation (the Foundation) released the September 2014 Monthly Confidence Index for the Equipment Finance Industry (MCI-EFI). Designed to collect leadership data, the index reports a qualitative assessment of both the prevailing business conditions and expectations for the future as reported by key executives from the $827 billion equipment finance sector. Overall, confidence in the equipment finance

market is 60.2, an increase from the August index of 58.9. When asked about the outlook for the future, MCI-EFI survey respondent Valerie Hayes Jester, president, Brandywine Capital Associates Inc., said, “We are experiencing stronger demand than in the past several months, which bodes well for a strong fourth quarter. There is still concern for yield erosion, but we look forward to concluding the year on a positive trend.”

September 2014 Survey Results: The overall MCI-EFI is 60.2, an increase from the August index of 58.9. • When asked to assess their business conditions over the next four months, 36.4 percent of executives responding said they believe business conditions will improve over the next four months, up from 18.2 percent in August. 60.6 percent of respondents believe business condisee ELFA page 49

Page 2 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Trading Up for a Better Future...

Mike Rowe Celebrates Holt CAT’s $1M Commitment Holt CAT, the Caterpillar Equipment and Engine dealer for south, central, north and northeast Texas, has pledged $1 million to support the workforce in “trading UP for a better future” with trade-skills and technical training across Texas over the next three years. The commitment will provide select Texas high schools and technical colleges with funding and resources for job skills training in industries looking to hire. To mark the commitment and celebrate skilled trades training education, host and executive producer of ‘Dirty Jobs’ and the

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

ner with all 1,500-plus student signatures committing to Rowe’s S.W.E.A.T. Pledge, ‘Skilled and Work Ethic Aren’t Taboo.’ Dubiski and Holt CAT first formed the “trading UP” internship program in 2012 to offer junior and senior students world-class mentoring with paid internships to learn about repair and maintenance of heavy equipment, including hydraulics, electronics and diesel engines. Interns graduate from Dubiski with the basic skills to join the workforce as entry-level heavy-equipment technicians.

“We are proud of the partnership we have with Holt CAT. Our students have the opportunity to gain real-world experience while still in high school before transitioning to great jobs after high school.” Dr. Susan Hull Grand Prairie ISD

new series on CNN called, ‘Somebody’s Gotta Do It,’ Mike Rowe joined Grand Prairie ISD Superintendent Dr. Susan Hull and Holt CAT and Caterpillar officials for a pep rally at Dubiski Career High School in Grand Prairie. In addition to the $1 million commitment to vocational education and training in Texas, Holt CAT presented the Dubiski School of Transportation $10,000 through the CAT Dealership Excellence Fund, which supports classroom guidance materials, equipment purchases and other materials to further technical training and education at the school. Mike Rowe began working with Caterpillar several years ago around the joint interest of driving skilled workers into the American workforce. The mikeroweWORKS Foundation was created to campaign for hard work and skilled labor and applauds schools like Dubiski Career High School that are geared toward giving students training at the primary level that can help them in their future career paths. During the pep rally, Rowe fired up the students and encouraged and praised the value of old-fashioned hard work. The students also presented him with a gigantic ban-

“Texas depends on skilled trades to get big projects done, and Holt CAT needs skilled techs,” said J.K. Baxter, Holt CAT senior vice president and general manager, machine division. “By partnering with Dubiski Career High School and other Texas schools, Holt is investing in the future of individual students as well as the economic well-being of the state.” “We are proud of the partnership we have with Holt CAT,” said Hull. “Our students have the opportunity to gain real-world experience while still in high school before transitioning to great jobs after high school.” Holt’s unique internship program with Dubiski has boosted opportunities for youth interested in a career in the skilled trades by giving them access to industry-leading technical training and real-life on-the-job experience. Ten recent Dubiski graduates are currently full-time Holt CAT technicians and seven current students are completing the internship program with Holt. Since 2012, more than 80 percent of the Dubiski student internship participants have been offered full-time positions with Holt CAT. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 3

"In Business for over 32 Years" www.hendrixmachineryllc.com 2006 Ingersoll-Rand SD100F, Stk#: 9462, 84" Pad Drum, 599 hrs., 4 Cyl. Cummins Eng., 10' 5" Height ..............................................$59,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla 2009 Cat D5K LGP, Stk#: 9475, EROPS, A/C, 6 Español Way Blade, 6,291 hrs., 26" Pads, 10' 4" Wide...... ............................................................$72,500

1996 Komatsu PC150-5, Stk#: 9538, EROPS, 8,502 hrs., 43" Bucket, 28" Pads, 8' 10" Wide...... ............................................................$24,500

2007 Ingersoll-Rand SD45D TF, Stk#: 9516, 54" Smooth Drum, 472 hrs., 12.4x24 Tires, 4 Cyl. Cummins Eng ......................................$29,500

2011 Cat 416E ST, Stk#: 9477, EROPS, A/C, 2002 JLG G9-43A, Stk#: 8879, 9,000 lbs., 43 ft., 4WD, 494 hrs., Aux. Hyd., 24" Bucket, 2 Stick 2008 Cat D6T LGP, Stk#: 9489, EROPS, A/C, St/Tilt Blade, 9,247 hrs., 36" Pads, 13' 2" Wide .. Controls, 12.5x80-18 Front Tires, 19.5Lx24 Rear 5,262 hrs., 4WD, 60" Forks, 74" Frame, 13.00x24 ..........................................................$129,500 Tires ....................................................$69,500 Foam Filled Tires, 4 Cyl. JD Eng ..........$34,500

2008 Magnum MLG20, Stk#: 9561, 20KW, 7,071 hrs., 4 Cyl. Izusu Eng., 205x75R15x975 Tires ......................................................$6,500

2005 Genie S80, Stk#: 9087, 500 lbs., 80 ft., 5,909 hrs., 4WD, 385x65Dx22.5 Tires, 4 Cyl. Duetz Eng ............................................$46,500

2013 Cat 924K, Stk#: 9473, EROPS, A/C, FM Stereo, 241 hrs., 8' 4" Bucket, 20.5x25 Tires, 6 Cyl. Cat Eng., 11' 4" Height ................$145,500

2006 Ingersoll-Rand RT706J, Stk#: 9468, 6,000 2007 Ditch Witch RT40, Stk#: 9435, OROPS, 2012 John Deere 210G LC, Stk#: 9418, EROPS, lbs., 15 ft., 2,951 hrs., 2WD, 48" Forks, 60" 4WD, 1,227 hrs., 64" Push Blade, Side Shift Frame, 11Lx16 Rear Tires, 16.9x24 Front Tires, A/C, FM Stereo, 2,879 hrs., 42" Bucket, 32" Pads, Boom, 6" Trench, 3 Cyl. Deutz Diesel Eng$14,500 4 Cyl. JD Eng........................................$21,500 10' 6" Wide ............................................$132,500

2006 John Deere 9520, Stk#: 9343, EROPS, A/C, FM Stereo, 7,177 hrs., 76x50.00B32 or 1250/45B32 Tires, JD Eng., 12' Wide, 11' 7" Height, Bucket, 6 Cyl., 11' 4" Height ..$125,000

2006 John Deere 700J LGP, Stk#: HR-364, EROPS, A/C, Sweeps, Rear & Side Screens, 6 Way Blade, 6,062 hrs., 30" Pads, 11 ft. Wide $65,000

2005 Cat 140H, Stk#: 9466, EROPS, A/C, 8,289 hrs., 14 ft. M/B, Ripper, 14.00x24 Tires, 10' 6" Height, 8 ft. Wide ..............................$139,500

2011 John Deere 650J LT, Stk#: HR-88, OROPS, Forestry Package, 6 Way Blade, 80% U/C, 2,453 hrs., Ripper Valve, 18" Pads, Height 9' 5", Width 8' 9', Width Track to Track 6' 7" ...... ............................................................$79,500

2011 Cat D3K LGP, Stk#: 9408, EROPS, A/C, 6 2005 Dynapac CA121D, Stk#: 9501, 54" 1995 Cat 135H, Stk#: #9498, EROPS, 1,021 2007 Cat D6T LGP, Stk#: 9527, EROPS, A/C, hrs., 14 ft. Blade, Scarifiers, 14.00x24 Tires ........ Smooth Drum, (old mtr. 1,353 hrs.) New Meter: Way Blade, 395 hrs., 25" Pads, 10' 4' Wide ........ Rear & Side Screens, St/Tilt, Blade, 9,382 hrs., 46 hrs., 13.50x16.1 Tires, 3 Cyl. JD Eng$22,500 ............................................................$86,500 36" Pads, 13 ft. Wide..........................$129,500 ............................................................$72,500

2006 Cat D6R III XL, Stk#: 9113, EROPS, A/C, Sweeps, Rear Screen, Angle Blade, 6,078 hrs., 80% U/C, 24" Pads, 10' 8" Wide ........$129,500

2011 Cat 259B3, Stk#: 9428, EROPS, A/C, 1,347 hrs., 73" bucket, Aux. Hyd., 16" Rubber Tracks, 4 Cyl. Cat Eng ..........................$38,500

2005 Gradall G6-42P, Stk#: 9149, 6,000 lbs., 42 ft., 4WD, 4WS, 3,664 hrs., Hyd. Self Leveling 2007 John Deere 450J LGP, Stk#: 9340, System, 48" Forks, 50" Tilt Frame, 13.00x24 OROPS, 6 Way Blade, 5,631 hrs., 24" Pads, 9' Foam Filled Tires, 4 Cyl. JD Eng ..........$29,500 7" Wide ................................................$39,500

1997 Cat D8R, Stk#: 9502, EROPS, 16 ft. Angle Blade, 9,853 hrs., Ripper no Shanks, No Eng. Encl., 22" Pads, 11' 6" Wide ..............$109,500

2006 John Deere 1050C, Stk#: 9503, EROPS, A/C, 14 ft. S/U Tilt Blade, 29" Pads, 12 ft. Height ..........................................................$109,500

1976 Cat 631C, Stk#: 9530, EROPS, A/C, 33.25x35 Tires, 48 ft. Long, 12'8" Wide, 13 ft. Height ..................................................$26,500

2011 Cat D3K XL, Stk#: 9374, EROPS, A/C, 2013 Case SV185, Stk#: 9525, OROPS, 4 hrs., Sweeps, Rear Screen, 6 Way Blade, 4,396 hrs., 64" Bucket, Aux. Hyd., Hyd. Quick Coupler, 4 Cyl. 80% U/C, 16" Pads, 4 Cyl. Cat Eng., 9' 6" Wide .. CNH Eng ..............................................$38,500 ............................................................$69,500

2001 Cat 160H, Stk#: 9485, EROPS, A/C, FM Stereo, 6,070 hrs., 17.5x25L-2 Tires, 14 ft.M/B, 9 ft. Wide............................................$109,500

2009 Volvo G930, Stk: #9246, EROPS, A/C, FM Stereo, 5,505 hrs., 14 ft. Blade, Rear Ripper, 14.00x24 Tires, 10' 9" Height, 8 ft. Wide, 6 Cyl. Volvo Eng ............................................$119,500

2007 JLG 3394RT, Stk#: 9441, 2,250 lbs., 33 ft., 4WD, 1,693 hrs., 82 hp, 7' Wx12' 10" L Platform, 33x15.50x16.5 Tires, Gas Eng$16,500

1996 Komatsu PC150-5, Stk#: 9538, EROPS, 2007 Multiquip, Stk#: 8596, 85-89 KVA, 4,919 8,499 hrs., 43" Bucket, 28" Pads, 8' 10" Wide...... hrs., St225x75Dx15 Tires, 4 Cyl. JD Eng$24,500 ............................................................$24,500

2006 Skytrak 6042, Stk#: 9266, 6,000 lbs., 42 Ft., 2,320 hrs., 4WD, 4WS, 48" Forks, 48" Frame, 2008 Club Car XRT 1550, Stk#: 9537, 4WD, Aux. Hyd., 13.00x24 Foam Filled Tires, Hyd. Self 1,283 hrs., 25x11.00x12 Tires, 2 Cyl. Gas Eng .... Leveling System, 4 Cyl. Cummins Eng...$34,500 ............................................................ $75,000

Page 4 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WESTERN EDITION

IN THIS ISSUE 16

To read these stories and many more, visit www.constructionequipmentguide.com

SPECIAL SECTION 31 RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling,

16 KPI-JCI, ASTEC MOBILE SCREENS HOSTS 70 DEALERS FOR ANNUAL CONFERENCE KPI-JCI and Astec Mobile Screens hosted 70 authorized North American dealers at its annual National Dealer Conference, held Sept. 15 to 17 at The Curtis Hotel in Denver, Colo.

crushing and screening.

20 HONNEN EQUIPMENT CELEBRATES GRAND OPENING FOR NEW SALT LAKE CITY FACILITY

FEATURES 2

MIKE ROWE CELEBRATES HOLT CAT’S

$1M COMMITMENT

Honnen Equipment, the John Deere construction equipment dealer in Colorado, Utah, Wyoming and southern Idaho, celebrated the grand opening of its brand new 60,000 sq. ft. state-of-the-art full service facility at 1380 S. Distribution Drive in Salt Lake City, Utah, on Sept. 18.

Circulated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

Founder, Publisher & CEO Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Christine Reckner Pete Sigmund John Pinkerton Tom Weinmann Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site www.constructionequipmentguide.com Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com For advertising rates: Contact Kent Hogeboom National Sales Manager 315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com Contact Dale Agnew

• Colorado • Louisiana • Oklahoma • Texas

northeast Texas, has pledged $1 million to support the workforce in “trading UP

40 EFFICIENCY SHORING TEXAS BRANCH HOSTS FIRST

Toll Free 877/877-4997 Fax 972/695-6049 e-mail dagnew@cegltd.com

for a better future” with trade-skills and technical training across Texas over the

OPEN HOUSE

Contact Dennis Hogeboom

next three years.

The Open House featured a “trade show” with the following vendors participating: Always There Personnel, Cabelas, Cherne Industries, Delta Rigging, Drager, NUCA North Texas and RemX Specialty Staffing.

Holt CAT, the Caterpillar Equipment and Engine dealer for south, central, north and

KIRBY-SMITH ODESSA EXCELS

Every year the Odessa American puts out the “Odessa American 2014 Best of the Permian Basin Readers’ Choice” awards for business in the area. For being a fairly new dealer in the Permian Basin area, this is a great achievement for the Odessa branch.

A memo sent to the Arkansas River Infrastructure Task Force estimates the cost to build or refurbish four low-water dams in the Arkansas River has risen by $80 million.

LIUGONG MAKES ADDITIONS

48 ESTIMATED COSTS UP FOR RIVER DAM

ROD CORROSION CONCERNS BAY

Bridge’s new eastern span have been damaged by exposure to water. Transportation officials said Sept. 25 that inspectors discovered that several of the galvanized steel rods that anchor the 525-ft. (160 m) tower to its base had been sitting in water that could cause corrosion, according to the San Francisco Chronicle.

602/679-8759 e-mail dennishogeboom@cegltd.com Contact Patrick Kiel

• Idaho • Montana • Oregon • Washington • Wyoming

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com

Mobile

Facebook

Twitter

YouTube

EQUIPMENT 10 GROUSER 1300 Dozer U-Blade 12 PALADIN Bradco Hardscape Grapple 25 HENDRICKSON HAULMAAX Rear Suspension System

BRIDGE OFFICIALS State transportation officials are trying to determine if giant steel rods on the Bay

• Arizona • California • Hawaii • Nevada • New Mexico • Utah

DEPARTMENTS 41 CLASSIFIEDS 43 COMING AUCTIONS 44 BUSINESS CALENDAR

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/5232200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 5

THE BEAST BRINGS EVERYTHING YOU NEED TO GET THE JOB DONE. Tame your toughest jobs with the raw power of KOBELCO excavators. With features like an exclusive independent travel system, operator controlled power boost and a heavy-duty cooling system, you can count on KOBELCO to get more done in less time. Plus, premier operator comforts and industry leading visibility mean you’ll actually enjoy operating these machines.

KOBELCO Premium Protection Plan Up to 84 months of full machine coverage.

KOBELCO-USA.COM

Page 6 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc. Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale....$85 Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale ..............$85 Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale .......... $85 Bobcat E35 Compact Excavator, 1:25 Scale ................................$50 Bobcat E55 Compact Excavator, 1:25 Scale ................................$60 Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ......................$25 Bobcat S175 Skid Steer Loader, 1:25 Scale ..................................$65 Bobcat S510 Skid Steer Loader, 1:25 Scale ..................................$65 Bobcat S530 Skid Steer Loader, 1:25 Scale ..................................$65 Caterpillar D7E Track-Type Tractor, 1:50 Scale - $90

Bobcat S550 Skid Steer Loader, 1:25 Scale ..................................$65

International TD-14 Crawler Dozer, 1:16 Scale - $150

Bobcat S570 Skid Steer Loader, 1:25 Scale ..................................$65

Caterpillar 740B EJ Articulated Dump Truck w/ Ejector Body, 1:50

Komatsu D65PX-17 Dozer, 1:50 Scale ............................................$80

Bobcat T550 Track Loader, 1:25 Scale............................................$70

Scale......................................................................................................$70

Komatsu D155AX Dozer w/ripper, 1:50 Scale ..............................$95

Bobcat T770 Compact Track Loader, 1:25 Scale..........................$45

Caterpillar 963D Track Loader, 1:50 Scale ....................................$60

Komatsu D375A Dozer, 1:50 Scale................................................$125

Bobcat 225 Compact Excavator, 1:25 Scale..................................$50

Caterpillar 966K Wheel Loader, 1:50 Scale....................................$95

Komatsu D475A Dozer w/ripper, 1:50 Scale................................$160

Case CX250C Excavator, 1:50 Scale ............................................$195

Caterpillar 977 Traxcavator, 1:50 Scale ..........................................$60

Komatsu GD655 Motor Grader, 1:50 Scale....................................$90

Case 95XT Skid Steer Loader (Conrad), 1:32 Scale ....................$60

Caterpillar 988K w/ Grapple, 1:50 Scale ......................................$160

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........................$80

Case 580 ST Backhoe/Loader, 1:50 Scale ....................................$95

Demag Tracked Paver (NZG), 1:50 Scale ......................................$75

Komatsu HM250 Articulated Dump Truck, 1:50 Scale ................$75

Case 1102 Vibromax Roller, 1:35 Scale ........................................$100

Doosan Moxy MT31 Articulated Truck ........................................$100

Komatsu HM400-3 Articulated Truck, 1:50 Scale ......................$100

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,

Dynapac SD2500 CS Road Paver, 1:50 Scale ............................$150

1:50 Scale ..........................................................................................$100

Grove TM1500 White 12 Axle Truck Crane, 1:50 Scale ............$160

Caterpillar 775G Off-Highway Truck, 1:50 Scale ........................$110

Hamm 3307 Compact Roller, 1:34 Scale ........................................$45

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale..................$65

Hamm 3414 Pad Foot Compactor, 1:50 Scale ..............................$90

Caterpillar D6K Track-Type Tractor, 1:50 Scale ............................$65

International 175 Crawler Loader, 4in1, 1:50 Scale ......................$65

Caterpillar D7E Track-Type Tractor, 1:50 Scale ............................$90

International 433 Dual Engine Pay Scraper, 1:25 Scale ............$225

Caterpillar D8L Track-Type Tractor (NZG 233), 1:50 Scale..........$75

International 560 Pay Loader, 1:25 Scale ....................................$145

Caterpillar D8T Track-Type Tractor, 1:50 Scale............................$110

International TD-15 Dozer w/Umbrella, 1:50 Scale ......................$60

Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ........$75

International TD-20E Dozer, 1:64 Scale ..........................................$24

Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........................$50

International TD-25 Dozer w/Ripper, 1:25 Scale..........................$180

Leeboy 8816 Asphalt Paver, 1:50 Scale..........................................$90

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ..........$185

JCB 3CX Backhoe/Loader, 1:50 Scale............................................$75

Liebherr R916 Litronic Excavator, 1:50 Scale ............................$150

Caterpillar D10T Track-Type Tractor, 1:50 Scale ........................$100

John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ..........$70

Link Belt 800 X2 Excavator, 1:50 Scale ........................................$200

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........................$100

John Deere 200C LC Excavator, 1:50 Scale ..................................$45

Poclain TC45 Excavator, 1:50 Scale..............................................$140

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale ....$150

John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........................$45

Vogele 1900-2 Tracked Paver, 1:50 Scale........................$140

Caterpillar 323D L Excavator, 1:50 Scale........................................$90

John Deere 624J Military Wheel Loader, 1:50 Scale....................$40

Vogele MT3000 Powerfeeder, 1:50 Scale ....................................$140

Caterpillar 336D L Excavator, 1:50 Scale........................................$95

John Deere 772CH Motor Grader, 1:50 Scale................................$45

Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........................$115

Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..............$50

John Deere 959K Track Feller Buncher, 1:50 Scale ....................$90

Volvo EC220D Excavator, 1:50 Scale............................................$115

Caterpillar 365B L Series II Excavator, 1:50 Scale........................$75

Komatsu CK25 Compact Track Loader, 1:50 Scale ....................$45

Volvo L220G Wheel Loader, 1:50 Scale........................................$120

Caterpillar 416B Backhoe/Loader (NZG 285), 1:50 Scale............$70

Komatsu D51 EX Dozer, 1:50 Scale ................................................$85

Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale............................$90

Caterpillar 428 Backhoe/Loader (NZG 2851), 1:50 Scale ............$70

Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ..........................$80

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ..........$145

Komatsu PC200 Excavator, 1:50 Scale ..........................$160 Komatsu PC490LC-10 Excavator, 1:50 Scale ................ $175 Komatsu WA470-7 Wheel Loader, 1:50 Scale ..............................$75 Komatsu WA500 Wheel Loader, 1:50 Scale ..................................$80 Komatsu WB146 Backhoe/Loader, 1:50 Scale..............................$75 Komatsu WH613 Telehandler, 1:50 Scale ......................................$65 Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..........$90 Leeboy 785 Motor Grader, 1:64 Scale ............................................$90

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ October 18, 2014 â&#x20AC;˘ Page 7

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

2004 Caterpillar 321C LCR: #92063, Cab/AC, QC, Aux Hyd, 9,100 hrs ....................................$64,500

2002 Caterpillar 325CL: #92079, Cab/AC, 31.5â&#x20AC;? Tracks, 10â&#x20AC;&#x2122; 6â&#x20AC;? Arm, QC, 12,100 hrs ........$69,500

2004 Deere 120C: #92046, Cab/AC, 27.5â&#x20AC;? Tracks, Mech Thumb, 4,200 hrs ..............$53,500

2001 Komatsu PC220LC-6LF: #80381, Cab/AC, 60â&#x20AC;&#x2122; Long Front, 5,700 hrs ......................$139,500

1983 Dresser TD20E: #92025, Cab, 24â&#x20AC;? Tracks, Drawbar, Sweeps ......................................$34,500

1998 Caterpillar D6M XL: #81916, Cab/AC, 24â&#x20AC;? Tracks, Winch, 13,500 hrs........................$99,500

2008 Komatsu D51EX-22: #82113, Cab/AC, PAT Blade, Sweeps, KOMTRAX, 2,650 hrs ..$112,500

2004 Komatsu D65EX-15: #80803, Cab/AC, 20â&#x20AC;? Tracks, Drawbar, 3,550 hrs ....................$117,500

2002 Komatsu WA250-3: #92018, Cab/AC, JRB QC, 8,200 hrs............................................$47,500

2007 Komatsu WA250-5: #82117, Cab/AC, JRB QC, 3rd Valve, 4,500 hrs ..........................$93,500

2006 Komatsu WA450-5: #81696, Cab/AC, GP Bucket, High Lift, 8,100 hrs....................$134,500

2006 Komatsu WA80-5: #81981, Cab/AC, QC/Bucket, 1,700 hrs................................$59,500

Page 8 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Best Oilfield Rental Equipment Co. ...

LiuGong Makes Additions

Kirby-Smith Odessa Excels On Sep. 28, Kirby-Smith Machinery Inc. was named Best Oilfield Rental Equipment Company in the Permian Basin. Every year the Odessa American puts out the “Odessa American 2014 Best of the Permian Basin Readers’ Choice” awards for business in the area. For being a fairly new dealer in the Permian Basin area, this is a great achievement for the Odessa branch. “Do whatever it takes to make our customers successful.” That is the philosophy of the Kirby-Smith Odessa branch. KirbySmith’s commitment to its customers goes beyond carrying world-class products. The Company backs them with exceptional parts and service support as well. Kirby-Smith genuinely cares for its customers and works diligently to make sure all customers are satisfied with its service, according to the company. Kirby-Smith Machinery has been ranked in North America for many years as one of the top tier distributors of Komatsu, Manitou, Gehl, National Crane and Wirtgen. The Odessa location rents, sells and services heavy equipment and boom truck cranes, in a new environmentally friendly facility. Customers have many options to

buy, lease and rent to own heavy equipment or crane products such as Komatsu dirt equipment, National Crane boom trucks, Manitou variable reach forklifts, Gehl skid steers, Wirtgen stabilizers, Kleemann Crushers, Hamm rollers and Vogele asphalt pavers just to name a few. Making customers wait weeks for service is not in Kirby-Smith Machinery’s operating philosophy. It is very unusual for a KirbySmith customers to not get service within 24 to 48 hours. The company offers in shop service as well as field service where Kirby-Smith Machinery technicians come directly to customers’s facility or job site with fully equipped heavy-duty service trucks. KirbySmith services the units it rents or sells with certified factory trained technicians. In Odessa it developed its own testing ground to ensure units are “rent ready” to take on the harsh Permian Basin environment. For more information, visit www.Kirbysmith.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

LiuGong North America has appointed Jake Huang as vice president of LiuGong North America. Huang will be responsible for overseeing Mexico and Central America (a territory under the LiuGong North America umbrella) and Dressta business development. This role was previously held by Dai Wuping, who has accepted a new role within LiuGong Overseas Division at LiuGong global headquarters in Liuzhou, China. Huang joined LiuGong in 2002 and has been working in the overseas sales and marketing division for 12 years. Prior to joining the LiuGong North America team, he held the positions of VP of LiuGong India and VP of LiuGong Hong Kong financing company. He will report to Marc Dowdell, president of LiuGong North Amercia. LiuGong North America also made the following recent additions: • Wojciech “Wojo” Gryzbala has been appointed as Dressta parts technical support. He previously worked for LiuGong Dressta Poland where he has spent more than 10 years in parts technical and logistics for the Dressta product line. • Chen “Tiny” Zhe has been appointed as LiuGong CE parts technical support. He previously worked at LiuGong Global

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

Headquarters in Liuzhou, China. • Gina Salazar has been appointed as warranty coordinator. • Shavonne Jaquess has been appointed as senior parts customer representative. • Chanda Sexton has been appointed as parts customer service representative. “We thank Dai Wuping for his many contributions to our growth in the Mexican and Central American markets and wish him well in his new endeavor at our corporate headquarters. We also look forward to the continued focus, support and improvement of this key strategic area with the appointment of Jake Huang as VP,” said Marc Dowdell, president of LiuGong North America. “The additions of key roles in parts technical support for both Dressta and the LiuGong CE Lines, as well warranty and customer service, are further demonstration of our commitment to continuous improvement of our product support team and specialized technical focus on our core products.” For more information, visit www.liugongna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Rod Corrosion Concerns Bay Bridge Officials SAN FRANCISCO (AP) State transportation officials are trying to determine if giant steel rods on the Bay Bridge’s new eastern span have been damaged by exposure to water. Transportation officials said Sept. 25 that inspectors discovered that several of the galvanized steel rods that anchor the 525-ft. (160 m) tower to its base had been sitting in water that could cause corrosion, according to the San Francisco Chronicle. Caltrans has drained the water, but officials don’t know how long the rods were exposed to water and whether they were compromised. To check, they would need to remove and cut them into pieces. It appears the water, most likely from rain, became trapped under caulking before the tower was lowered into position starting in 2010, said Andrew Fremier, deputy executive director of the Metropolitan Transportation Commission, which oversees the bridge project. To help determine if the rods were compromised, officials plan to test the water for zinc, which is left behind when hydrogen attacks galvanized steel, Fremier said. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

SECTION

Attachment & Parts Pages 9-13

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Genesis Grows Demo Recycler Concrete Processor Product Family With GDR 400

The Geith (pro-link) hydraulic thumb provides up to 180 degrees of rotation.

Genesis Attachments expanded its demolition recycler concrete processor product family with the new GDR 400. Fitting 40 to 55 ton (36 to 50 t) excavators, the GDR 400 features a 48-in. (122 cm) jaw opening and 41-in. (104 cm) jaw depth, making it the line’s most powerful all-purpose processing and cutting attachment for high-reach and standard demolition as well as road and bridge applications. “The availability of the GDR 400 concrete processing attachment positions Genesis to better serve the project spectrum of demolition contractors worldwide, from small with our GDR 150 to now the largest projects with the 400,” said Chad Wood, Genesis new product development engineer. The GDR 400 is available with concrete cracker or concrete pulverizer jaws, each of which minimizes dust, noise and flying debris while maximizing productivity, according to the manufacturer. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The GDR 400 is available with concrete cracker or concrete pulverizer jaws.

Pro-Link Thumb Doosan Wedge Lock Coupler Attachment Expands Mounting System Lineup Offers Greater Grabbing Ability The Geith progressive linkage (pro-link) hydraulic thumb provides up to 180 degrees of rotation, allowing operators to pick up and place rocks, tree stumps and pipes — among other odd-shaped objects — closer to the excavator. The prolink thumb’s universal pivot linkage system enables it to be installed on any excavator arm — without requiring the removal of the dipper arm linkage. Manufactured with high-strength steel, the thumb’s strong, rigid structure and oversized high-profile pivot pin increase torsion resistance. In addition, integrated linkage positional stops protect the hydraulic cylinder from damage, while a lock-up pin enables operators to safely secure the thumb in a storage position when not in use. The inductionhardened-chrome hydraulic cylinder rod further extends the pro-link thumb’s working life. For more information, visit www.geith.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Doosan has released the force. The new coupler has a wedge lock coupler for use limited increase in tip radius with the company’s 6.6 to 58 over pin-on mounting. ton (6 to 53 t) crawler excaThe wedge lock coupler is vators. This new attachment designed to allow for the use expands the Doosan coupler of multiple attachments, such line, which currently includes as Doosan’s line of heavythe hydraulic quick coupler. duty digging buckets. It also The new wedge lock coumounts the company’s curpler manual mounting system rent offering of trenching is approved for use with 13 buckets and is capable of crawler-excavator models efficiently releasing highincluding the DX63-3, capacity bucket models. The DX85R-3, DX140LC-3, The new wedge lock coupler manual mounting sys- new coupler also will pair DX140LCR-3, DX180LC-3, tem is approved for use with 13 crawler-excavator with Doosan’s excavator DX225LC-3, DX235LCR, models. clamp attachments. DX255LC-3, DX300LC-3, In an effort to increase job DX350LC-3, DX420LC-3, DX490LC-3 and DX530LC- site safety, the wedge lock coupler’s swing ear design and 3. the use of a bolt retainer safety plate helps prevent attachThe wedge lock coupler allows operators to change ments from falling. their excavator attachments without the need for addition(This story also can be found on Construction Equipment al hydraulics, but does not decrease a machine’s breakout Guide’s Web site at www.constructionequipmentguide.com.)

Page 10 • October 18, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Grouser Bulldozer Blades Give Push

The 1300 dozer U-blade from Grouser Products maximizes productivity by capturing and holding more material than a standard moldboard.

The 1300 dozer U-blade from Grouser Products gives users extra push for their 50- to 125-hp tractors equipped with front 3-point hitches or loader arms. The blade’s Ushaped design maximizes productivity by capturing and holding more material than a standard moldboard. Additional advantages include:

Got MATERIALS to Move? No matter what your material, Pemberton has the bucket, grapple or forks to handle it and we can fit it to your specific wheel loader or excavator. We have the attachment you need for construction, demolition, logging and scrap material or waste handling.

Contact Pemberton today to see how we can help you maximize your equipment and your manpower.

• A rugged 24-in. (61 cm) tall blade can be angled 30 degrees to the right or left and 10 degrees up or down to push through mud, silage and snow. • A variety of blade widths, from 8 to 10 ft. (2.4 to 3 m), meet different dozing challenges and equipment specifications. • An electric valve provides hydraulic control of both the angle and tilt using only one loader valve. • An 8-in. (20 cm), removable top extension prevents material from spilling over the dozer. Users save time because they don’t have to clean up lost material. • A flush-mounted, 6-in. (15 cm), reversible cutting edge made of high-alloy, heat-treated boron steel provides hours of trouble-free dozing and excellent wear in high-abrasion applications. When one edge wears out, flip it over for longer life. • A universal quick-attach system for skid loaders and MTLs keeps set-up and removal time to a minimum • An optional urethane cutting edge protects surfaces, such as a dairy barn’s concrete floor, from damage that a steel cutting edge would cause. Grouser also manufactures dozer blades that fit 100- to 600-hp ag tractors. For more information, call 800/747-6182 or visit www.grouser.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Whatever Your Application: RECYCLING • LOGGING • CONSTRUCTION • AQUATIC • WASTE HANDLING • DEMO • SCRAP • ROAD & BRIDGE We Have Your Attachment: GRAPPLES • BUCKETS • CRUSHERS • RAKES • SHEARS • FORKS • CUSTOM ENGINEERING

CLICK OR CALL TODAY! PEMBERTONATTACHMENTS.COM • 1-800-393-6688

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • October 18, 2014 • Page 11

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!

Page 12 • October 18, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Newest Addition to the Family...

Paladin’s Bradco Hardscape Grapple — All Gain No Pain

As a hydraulically-powered alternative to forks, pry bars and brute strength, the attachment’s grapple arms and rubber grips adjust automatically to the shape and contour of the material being grasped without additional positioning.

The Bradco hardscape grapple by Paladin Attachments is the newest addition to Paladin’s grapple selection. Designed to eliminate the back-breaking job of moving heavy hardscape materials from place to place, they are mounted on skid steer loaders, compact tool carriers and compact tractors for quick and easy handling of materials such as concrete paver sections, small boulders and granite/limestone/concrete steps. They are ideal for hardscape supply dealers, landscapers and property owners doing their own landscaping. As a hydraulically-powered alternative to forks, pry bars and brute strength, the attachment’s grapple arms and rubber grips adjust automatically to the shape and contour of the material being grasped without additional positioning. For increased safety, a cylinder check valve prevents loss of clamping force even if the machine’s hydraulic power is lost.

Users also can easily reach over other sections of materials for specific selection, or load and unload heavy hardscape materials from the bed of a trailer or truck. For easy storage, the hardscape grapple has a simple stand utilizing two steel tubes that have been integrated into the attachment and can be stored neatly in the quick attach when not in use. Weighing 175 lbs. (79 kg), this grapple attachment can lift up to 1,500 lbs. (680 kg) with a clamp force of 1,525 lbs. Designed with a grip range of 18 to 48 in. (46 to 122 cm), a plunge depth minimum of 13 in. (33 cm) and a maximum reach of 14 in. (35.5 cm) the hardscape grapple is purpose-built with the landscaper and hardscape supply dealer in mind. For more information, call 800/456-7100 or visit www.paladinattachments.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • October 18, 2014 • Page 13

Page 14 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Portable Power WE DO MORE THAN DESIGN EQUIPMENT.

WE POWER YOUR SUCCESS. Whether you are looking for products with the latest technology or you want to have your old machine remanufactured, Doosan Portable Power can help you acheive success. Focused on customer satisfaction and product solutions, our dealer network is the largest nationwide network in the industry. Contact your

local dealer today. Air Compressor Solutions, Inc.

Volvo Construction Equipment & Services

Pape Material Handling Inc. / Bobcat West

TEXAS

CALIFORNIA

www.papemh.com www.bobcatwest.com

Odessa (432) 335-5900

Ditch Witch of Arizona ARIZONA

Phoenix (602) 437-0351

Ditch Witch of Southern Arizona ARIZONA

Tucson (520) 579-0261

Bakersfield (661) 387-6090 Fresno (559) 834-4420 San Leandro (510) 357-9131 Sacramento (916) 388-2244 San Diego/Lakeside (619) 441-3690 Corona (951) 277-7620

Blueline Construction Equipment & Services www.bcespower.com

TEXAS

Arlington (817) 633-1010 Houston (713) 681-9221

LOUISIANA

West Monroe (318) 699-0610

Find Us on

800.633.5206

OREGON

Portland (503) 639-8910 Portland (503) 286-6400 Eugene (541) 689-7407 Medford (541) 779-3444

NEVADA

Sparks (775) 356-9333

WASHINGTON Seattle (206) 722-5800 Arlington (360) 474-8461 Fife (253) 926-4386 Bellingham (360) 756-6572 Yakima (509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934 Spokane (509) 536-7300

DoosanPortablePower.com

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ October 18, 2014 â&#x20AC;¢ Page 15

ASCO SUPPLY CO., INC. Austin, TX San Angelo, TX San Antonio, TX Wichita Falls, TX www.ascoeq.com

512/272-8922 325/655-5666 210/333-8000 940/687-2726

ABILENE NEW HOLLAND, LTD. Abilene, TX DEALER www.anhltd.com

800/382-9271

IMPRINT AREA

BANE MACHINERY INC. Dallas, TX Ft. Worth, TX Tyler, TX www.banemachinery.com

800/594-2263 800/601-2263 800/594-2200

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT

AN E.P.I.C. GENERATION

Oklahoma City, OK 405/917-9191 Tulsa, OK 918/835-7200 www.oklahomaterritoryequipment.com

EFFICIENT APCO EQUIPMENT North Las Vegas, NV www.apcoequipment.com

800/574-4089

POWERFUL TRI-WEST TRACTOR, INC. Livermore, CA www.tri-westtractor.com

RASMUSSEN EQUIPMENT CO. West Valley City, UT 800/453-8032 www.rasmussenequipment.com

CLM EQUIPMENT CO. INC. Broussard, LA Sulphur, LA Baton Rouge, LA Houston, TX www.clmequipment.com

INTELLIGENT

925/455-8200

337/837-6693 F: 337/837-3146 337625-5942 225/677-7838 281/598-2500

)HYYL[[ 7HYR +YP]L Â&#x2039; :\P[L )HYYL[[ 7HY Kennesaw, Georgia 30144 eo www.kawasakiloaders.com kilo

> > > COMFORTABLE

Page 16 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

KPI-JCI, Astec Mobile Screens Hosts 70 Dealers for Annual Conference KPI-JCI and Astec Mobile Screens hosted 70 authorized North American dealers at its annual National Dealer Conference, held Sept. 15 to 17 at The Curtis Hotel in Denver, Colo. Each year, KPI-JCI and Astec Mobile Screens launches new products and sales tools for its dealers during its National Dealer Conference. This year, KPI-JCI and Astec Mobile Screens launched four new pieces of equipment, including three new additions to its Global Track product line — a track-mounted GT440 horizontal shaft impact crushing plant, a track-mounted GT200 cone crushing plant and a trackmounted GT206 inclined screening plant — as well as a new Fast Trax FT400DF cone crushing plant. The Global Track product line features quarry-duty, time-proven components and was developed to be the perfect rental tool and ideal for operations in remote locations. KPI-JCI and Astec Mobile Screens is a premiere heavy equipment manufacturer for the aggregate, recycling and construction industries. In addition to its new product launches, KPI-JCI and Astec Mobile Screens also introduced a number of new tools for its dealers, including a new online parts catalog, online service training courses, a digital standard flow tool and an online dealer quote tool. These tools will be available to authorized dealers in 2015, according to Melinda Schweitzer, marketing manager of KPI-JCI and Astec Mobile Screens “We believe these new tools will provide our domestic and international dealers with the resources they need to

(L-R): John McGimpsey of KPI-JCI takes a photo op with Marlin and Larry Smith of T-K-O in Irving, Texas, and the new GT440 horizontal shaft impact crusher that was unveiled at the National Dealer conference in Denver, Colo., in September.

tap into new and existing markets with our innovative products,” Schweitzer said. “These valuable new digital and online resources will allow our dealers to have the latest information at their fingertips, which will help them serve their customers effectively and in an engaging and interactive manner.” In addition to the educational sessions on KPI-JCI and Astec Mobile Screens’ latest innovations, dealers were recognized for their sales excel-

lence during the annual NDC awards dinner. Dealers and industry media also attended an equipment expo at Sports Authority Field at Mile High Stadium with four pieces of new equipment on display. For more information, visit www.kpijci.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

COLORADO

TEXAS

WAGNER EQUIPMENT CO. www.wagnerequipment.com Aurora 303-739-3000 Denver 303-433-2727 (Rental) Carbondale 970-963-7368 (Rental) Commerce City 303-286-2300 (Rental) Colorado Springs 719-390-7316 (Rental) 719-635-1669 Granby 970-328-2080 (Rental) Gypsum 970-328-2080 (Rental) Hayden 970-276-3781 Silverthorne 970-262-3788 (Rental) Fort Collins 970-493-5005 (Rental) Grand Junction 970-245-6546 (Rental) 970-242-2834 Pueblo 719-544-0088 (Rental) 719-544-4433 Steamboat Springs 970-871-1990 (Rental) Windsor 970-278-1750 (Rental) Burlington 719-346-7880 (Rental) (719) 346-5132 Durango 970-259-2001 (Rental) 970-259-2001 Windsor 970-278-1750

ANDERSON MACHINERY CO. www.andersonmachinerytexas.com Corpus Christi • 361-289-6043 Manor • 512-272-8133 Pharr • 956-781-5995 San Antonio • 210-661-2366 Victoria • 361-575-8111

NEW MEXICO WAGNER EQUIPMENT CO. www.wagnerequipment.com Flora Vista 505-334-5522 (Rental) La Cruces 575-647-9700 Albuquerque 505-938-2000 (Rental) 505-345-8411 Hobbs 575-393-2148 (Rental) 575-393-3665 Clovis 505-235-3294 (Rental) Farmington 505-327-5331

OKLAHOMA OCT EQUIPMENT www.octequipment.com Clinton • 580-323-3422 Oklahoma City • 405-789-6812 Tulsa • 918-437-5085

Scott Byers (L), sales manager, and Berry D. Smith, president of Texas Bearing Co. in Amarillo, Texas, admire the new GT206 track mounted screening plant that was introduced at the National Dealer Conference in Denver, Colo.

Gary Klipp (L) and Jim Schmitt of Power Motive Corp. have taken a real interest in the new GT200 crushing plant featuring a 1200LS cone crusher, one of the company’s newest additions to its Global Track products.

HOLT CAT www.holtcat.com Dallas • 214-342-6700 Ft. Worth • 817-847-8880 Irving • 214-342-6700 Waco • 254-662-7377 GEORGE P. BANE, INC. www.banemachinery.com Tyler • 903-597-6641 YELLOWHOUSE MACHINERY CO. www.yellowhouse.us Abilene • 325-677-2291 Amarillo • 806-335-1681 Lubbock • 806-763-0473 Odessa • 432-580-3337 San Angelo • 325-651-3337 Wichita Falls • 940-322-3337 MUSTANG CAT www.mustangcat.com Houston • 713-460-2000 Beaumont • 409-892-8412 Bryan • 979-775-7368 Bryan • 979-775-0639 Channelview • 281-452-7368 Conroe • 936-756-1110 El Campo • 979-543-3389 Freeport • 979-233-7368 Houston • 713-462-9993 Houston • 713-228-7368 LaMarque • 409-935-7000 Lufkin • 936-639-5551 Lufkin • 936-632-6775 Nederland • 409-722-7368 WAGNER EQUIPMENT CO. www.wagnerequipment.com El Paso 915-493-5005 (Rental) 915-821-7651

WASHINGTON N C MACHINERY 800-562-4735 Seattle • 425-251-5800 Chehalis • 360-748-8845 Fife • 253-896-0878 Monroe • 360-805-6000 Mt. Vernon • 360-424-4292 Wenatchee • 509-886-5561 Yakima • 509-248-2371

WYOMING TRACTOR AND EQUIPMENT Worland • 307-347-4747

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 17

ALASKA NC MACHINERY www.ncmachinery.com 800-478-7000 Anchorage, AK • 907-786-7500 Dutch Harbor, AK • 907-581-1367 Fairbanks, AK • 907-452-7251 Juneau, AK • 907-789-0181 Prudhoe Bay, AK • 907-659-6900 Wasilla, AK • 907-352-3400

ARIZONA EARHART EQUIPMENT www.earhartequipment.com Tucson • 520-889-6396

CALIFORNIA HAWTHORNE CAT www.hawthornecat.com San Diego • 800-437-4228 Lakeside/San Marcos/Chula Vista (Rental) 800-750-4228 HOLT OF CALIFORNIA www.holtca.com Pleasant Grove • 916-921-8969 QUINN CAT www.quinncompany.com 10006 Rose Hills Road City of Industry, CA 90601 888-842-2155 • Fax: 562-692-1843 Bakersfield Corcoran Firebaugh Foothill Ranch Fresno Lancaster Los Angeles Oxnard Salinas Santa Maria Sylmar

HAWAII HAWTHORNE CAT www.hawthornecat.com Hilo • 808-961-3437 Kauai • 808-245-4058 Kona • 808-329-4521 Oahu • 808-677-9111 Oahu • 808-676-0227 (Rental) Maui 808-877-6538

MONTANA TRACTOR AND EQUIPMENT Billings, MT • 406-656-0202 Billings-Sgt. • 406-245-4426 Bozeman • 406-585-5800 Great Falls • 406-761-7900 Helena • 406-442-2990

NEVADA CASHMAN EQUIPMENT www.cashmanequipment.com 3300 St. Rose Parkway Henderson, NV 89052 702-649-8777 Fax: 702-633-4699 Elko • 775-738-9871 Reno/Sparks • 775-358-5111

NORTH DAKOTA TRACTOR AND EQUIPMENT Williston • 701-572-8377

Page 18 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 19

www.liugongna.com T O U G H W O R L D . T O U G H E Q U I P M E N T. We make one of the broadest lines of construction, mining, road building and material handling equipment in the world. All

EVERY JOB. EVERYWHERE.

backed by top-notch warranty, training, parts and service support. Contact your local dealer today for more information...

Dearler 1 Houston, TX p. (555) 555 - 5555 www.dealersite.com

Anderson Machinery Co. 6535 Leopard St. Corpus Christi, Dealer TX 784092 361-289-6043 Austin, TX www.andersonmachinerytexas.com

Austin 512-272-8133

San Antonio 210-661-2366

Dealer 3 Victoria Dallas, TX 361-575-8111 p. (555) 555 - 5555 p. (555) 555 - 5555 Pharr 956-781-5995 www.dealersite.com www.dealersite.com Odessa 432-234-1566

Noble Equipment 505 Rankin Road Houston, TX 77073Dealer 4 281-443-7667 San Antonio, TX Fax 281-443-7886 www.nobleiron.com

p. (555) 555 - 5555 www.dealersite.com

Page 20 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Honnen Equipment Celebrates Grand Opening for New Salt Lake City Facility

WAUKESHA-PEARCE INDUSTRIES, INC. 12320 S. Main Houston, TX 77035 713-723-1050 Fax: 713-551-0798 Tomball, TX 281-351-9016 Kilgore, TX 903-984-2011 Port Arthur, TX 409-721-5305 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 San Antonio, TX 210-648-4444

The massive concrete structure is more than 60,000 sq. ft. and required 480 loads, or 19 million lbs. of concrete to complete.

Pflugerville, TX 512-251-0013 Buffalo, TX 903-322-7150 www.wpi.com

onnen Equipment, the John Deere construction equipment dealer in Colorado, Utah, Wyoming and southern Idaho, celebrated the grand opening of its brand new 60,000 sq. ft. state-of-the-art full service facility at 1380 S. Distribution Drive in Salt Lake City, Utah, on Sept. 18. During the event there were building tours through the parts warehouse, shop and rebuild area as well as an equipment rodeo contest, vendor display area and product demonstrations. The fully stocked, expanded parts warehouse and increased capacity service shop and rebuild area will provide a more extensive range of services to the construction, paving and landscaping industries in Salt Lake City and the surrounding areas.

The Salt Lake facility celebrated its official opening with a ribbon cutting this past June. From Left: (in hard hats) Travis Davis, project executive, Hughes General Contractors Inc.; Patrick Leary, deputy mayor, Salt Lake County; Sara Welker, member relations specialist, Salt Lake City Chamber of Commerce; Camilla Edsberg, president’s ambassador, Salt Lake City Chamber of Commerce; Mark Honnen, president, Honnen Equipment; Dave Kolesky, Utah region sales manager, Honnen Equipment; Shawn Walker, Utah region service manager, Honnen Equipment; Paul Rasmussen, Utah region parts manager, Honnen Equipment; Rich Thorn, president, AGC of Utah.

“We had a great turnout for this event and we look forward to continuing our commitment to partner with and provide support for all our customers in the Utah market.” said Mark

Honnen, Honnen Equipment president. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

KOMATSU EQUIPMENT COMPANY 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557 3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334 6253 West Gilbert Industrial Court Hurricane, UT 84737 435-986-1000 10790 South Highway 59 Gillette, WY 82718 307-682-1445 405 Jonah Drive Rock Springs, WY 82901 307-686-1300

An attendee moves a tire during the compact excavator skills contest.

An attendee tests out the John Deere excavator simulator.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 21

KIRBY-SMITH MACHINERY INC. 6715 W Reno Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065

PC490LC-10 From Komatsu - The Excavator Experts

Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000 www.kirby-smith.com

POWER MOTIVE CORPORATION DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 888-271-3308 Colorado Springs, CO 888-271-3308 Grand Junction, CO 888-271-3308 Milliken, CO 888-271-3308 Durango, CO 888-271-3308 Cheyenne, WY 888-271-3308

The Komatsu PC490LC-10 provides more power, improved operator comfort and reduced fuel consumption. The excavator experts at Komatsu can help you complete jobs more quickly, while lowering your fuel and maintenance costs. t Efficient Komatsu Tier 4 Interim engine and advanced hydraulic system maximize productivity while providing up to 5% lower fuel consumption. t Increased lift capacity with a larger machine design and a reinforced undercarriage t Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

www.powermotivecorp.com

www.komatsuamerica.com www .komatsuamerica.com

Page 22 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BANE MACHINERY, INC. 2449 Manana Rd. Dallas, TX 75220 214/352-2468 Fax: 214/353-2460 Tyler 903-597-6641 Ft. Worth 817/847-5894

BEE EQUIPMENT SALES LTD. 2506 E. Slaton Rd. Lubbock, TX 79404 806/745-1511 Fax: 806/455-0593

C. L. BOYD CO., INC. 4220 West Reno Ave. Oklahoma City, OK 73107 800/OKC-BOYD 405/942-8000 Fax: 405/945-8569

4 RIVERS EQUIPMENT Colorado Springs, CO 1100 E. Cheyenne Rd. 719/475-1100 www.4riversequipment.com

Ardmore, OK 866/720-2693 580/224-2693

Albuquerque 505/884-2900

Lawton, OK 800/633-2693 580/355-6667

El Paso 915/598-1133 Farmington 505/326-1101 Fort Collins 970/482-7154 Frederick 303/833-5900 Hobbs 575/392-6923 Pueblo West 719/547-3505

SECTION

Trucks & Trailers Pages 23-25

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

XL Trailers Showcases XL 110 Low-Profile HDG Trailer Ideal for hauling well in the rear bridge heavy construction easily accommodates equipment, the XL 110 excavators and the lowlow-profile hydraulic ered rear angle from detachable gooseneck deck to wheel area (HDG) trailer’s 13-ft. allows for easier loading (3.9 m) long low-profile of equipment over the neck saves weight, rear deck. The XL 110 allowing the truck plenty low-profile HDG feaof clearance to attach, tures three 25,000-lb. and has a five position (11,340 kg) minimal variable ride height. The axles on the rear bridge, XL 110 low-profile HDG spaced at 54.5 in. (138 trailer features an overall cm) apart (XL also length of 53 ft. (16 m) offers 60-in. [152 cm] with an overall width of axle spacing). 102 in. (259 cm), and is “There have been rated at 110,000 lbs. several customized (49,895 kg) capacity advancements in the XL overall and 100,000 lbs. 110 low-profile HDG (45,359 kg) in 10-ft. (3 trailer, including numerm) concentrated, for an ous tie down options,” efficient and versatile The XL 110 low-profile HDG trailer features an overall length of 53 ft. (16 m) with an overall width of 102 in. (259 cm), said Rodney Crim, and is rated at 110,000 lbs. (49,895 kg) capacity overall and 100,000 lbs. (45,359 kg) in 10-ft. (3 m) concentrated. trailer on the road. director of sales at XL To hold up from years Specialized Trailers. The rear bridge is 14 ft. (4.2 m) covers to drive equipment onto the “This trailer has quickly gained a of loading and unloading and keep removable swing-out outriggers tracks from slipping, the trailer has for hauling extra-wide loads. The long with a 40-in. (101.6 cm) bolsters. The bolt-on feature allows reputation as the go-to construction apitong decking — a wood much loaded deck has a height of 8 in. loaded deck height. To haul equip- users to remove and attach them as equipment hauler. stronger than oak. Featuring a 26- (20 cm) with a 24-in. (61 cm) ment on the rear bridge, the XL needed. For more information, visit Equipped with a deep well that xlspecializedtrailer.com. ft. (7.9 m) long main deck before ground clearance — a model with 110 is equipped with bolster chain the 32-degree approach, it includes a height of 18 in. (45.7 cm) with a slots and comes with the option of is specifically designed for long (This story also can be found on 80K web and T1 flange steel, 13 6-in. (15 cm) ground clearance bolt-on load-bearing wheel covers booms, the trailer eliminates the Construction Equipment Guide’s chain slots and seven bent D-rings also is available for the XL 110 for hauling loads on top of the need to detach the lower boom sec- Web site at www.constructionequipcover or semi-load-bearing wheel tion on a scraper. The deep bucket mentguide.com.) on each side, as well as heavy-duty low-profile HDG trailer.

Ox Bodies Unveils Stampede Ultralight Ox Bodies Stampede ultralight (UL) series dump body is well-suited for a range of applications from sand-to-small aggregates and asphalt. A lightweight, elliptical dump body is combined with traditional Stampede long-term reliability and durability. The Stampede ultralight is designed for maximizing payload capacity and reducing operating costs in low-wear payload conditions. Average dump body weight reduction is approximately 20 percent over the Ox Bodies’ similarly configured, heavier-duty Stampede HD version, according to the

manufacturer. The dump body features widths of 96 and 102 in. (244 and 259 cm), side heights of 36 to 46 in. (91 to 117 cm), lengths of 10 to 21 ft. (3 to 6.4 m) and capacities from 6.9 to 19.0 cu. yds. (52.7 to 14.5 cu m). In addition to a wide range of high-end features, numerous product-enhancing upgrades also are available. For more information, call 800/844-2519 or visit www.oxbodies.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 24 • October 18, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • October 18, 2014 • Page 25

Hendrickson Introduces Global Version of HAULMAAX Hendrickson Truck Commercial Vehicle Systems has launched a global version of the HAULMAAX rear suspension system. Offered in a 21-ton (19 t) capacity, the global HAULMAAX was designed specifically for those applications where light weight, durability and driver comfort are essential. Through its design, higher strength materials and advanced manufacturing methods, HAULMAAX’s weight is greatly reduced. Proven with extensive vehicle durability and laboratory testing, HAULMAAX delivers the reliability, quality and low maintenance customers have come to expect from Hendrickson, according to the manufacturer. In addition, HAULMAAX utilizes elastomeric bolster springs and a progressive load spring (PLS) that work in synergy to provide improved ride quality when the truck is empty. As payload increases, the PLS further engages and functions together with the elastomeric bolster springs as they compress to provide the additional stability vocational applications need. HAULMAAX addresses the lower-end capacity ranges of the global truck market and rounds out Hendrickson’s portfolio of elastomeric solutions that have been introduced over the last four years. In 2010, Hendrickson introduced the HUV vocational rear suspension system at 27 ton (24.5 t) to address the global mid-range capacity market. In 2013,

Hendrickson introduced ULTIMAAX to serve not only the mid-range capacities but also the more extreme, higher capacities with 27 to 37 ton (24.5

$26 Million...

Mack Truck Announces Major Plant Investments Mack Trucks announced a $26 million upgrade of the Macungie Cab & Vehicle Assembly facility in Macungie, Pa., that will significantly improve the plant’s efficiency and help it deliver even higher quality trucks to Mack customers, according to the manufacturer. The investment includes a comprehensive realignment of sub-assembly and material handling to more efficiently support the main vehicle assembly lines. The plant also will implement new processes and install new equipment to improve its post-production inspection and testing of completed vehicles. “This investment speaks to our commitment to operational excellence,” said Vice President and General Manager Roger Johnston. “Our highly engaged workforce will use these enhancements to take another

to 33.5 t) and 40 to 48 ton (36 to 43.5 t) solutions respectively. Both HUV and ULTIMAAX are characterized by designs that provide durability and weight savings for increased payload compared to traditional suspension designs. Both also carry a distinct elastomeric spring design that not only helps provide an ideal balance of empty ride quality and loaded stability, but also protects the chassis, cargo and body equipment from excessive vibration and road shock due to potholes and other road inconsistencies. “HUV and ULTIMAAX addressed the needs of specific customer segments, and raised the bar for durability and performance for heavy truck suspensions across the The globe,” said Matt Joy vice presiglobal HAULdent and general manager of MAAX was designed Hendrickson Truck Commercial specifically for those applications where light weight, duraVehicle Systems. “With the launch bility and driver comfort are of HAULMAAX, we’re rounding out our essential. offering of superior elastomeric solutions which continue to provide innovative ride solutions to advance the global commercial transportation industry.” For more information, call 630/910-2800 or visit www.hendrickson-intl.com.

step in our journey toward truly world-class manufacturing in Macungie.” Two new dynamometers — which allow completed trucks to run on stationary rollers for enhanced testing of a variety of engine and vehicle systems — will be installed as part of the upgrade. “Along with a product line-up and a dealer network that have never been stronger, this latest significant investment in our facilities sends a clear message that Mack is poised to grow our business,” said Stephen Roy, president of Mack Trucks North American Sales & Marketing. For more information, visit www.macktrucks.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Visit CEG’s Web Site at www.ConstructionEquipmentGuide.com

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 26 â&#x20AC;˘ October 18, 2014 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ October 18, 2014 â&#x20AC;˘ Page 27

Link-BeltÂŽ Spin AceÂŽ Excavators are packed with all the power, productivity, DQG IXHO HIÂżFLHQF\ \RXÂśYH FRPH WR H[SHFW IURP XV DORQJ ZLWK D PLQLPXP VZLQJ UDGLXV GHVLJQ IRU EHWWHU PDQHXYHUDELOLW\ DW VLWHV ZKHUH ZRUN VSDFH LV DW D SUHPLXP 7KRXJKWIXO UHGHVLJQ RI FRXQWHUZHLJKWV DQG ERRP SODFHPHQW PDNHV WKHP LGHDO IRU UHVLGHQWLDO FRQVWUXFWLRQ XWLOLW\ ZRUN DQG VSHFLDOW\ WUHQFKLQJ MREV Â&#x2021; 5RRP\ UHGHVLJQHG FDE Â&#x2021; +LJK GHÂżQLWLRQ IXOO FRORU Ć&#x17D; /(' PRQLWRU Â&#x2021; &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG Ă&#x20AC;XLG FKHFNV Â&#x2021; Extended service intervals Â&#x2021; )RXU PRGHOV Ć? Ć&#x17D; WR Ć? Ć&#x17D; WDLO VZLQJV Â&#x2021; 7LHU $ FHUWLÂżHG ,VX]X HQJLQHV Â&#x2021; \HDU VXEVFULSWLRQ WR 5HPRWH&$5(Â&#x152; WHOHPDWLFV $OO WKLV ZLWK WKH LQGXVWU\ÂśV EHVW VWDQGDUG ZDUUDQW\ <RXU /LQN %HOW ([FDYDWRU GHDOHU KDV WKH ULJKW 6SLQ $FH IRU \RXU DSSOLFDWLRQ DORQJ ZLWK XQFRPSURPLVLQJ VHUYLFH DQG VXSSRUW WR NHHS WKHP SHUIRUPLQJ DW WKHLU EHVW

Model #

Operating Weight

Net hp @ rpm

Tail Swing

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

*75 X3 and 80 X3 engines are Final Tier 4

Page 26 â&#x20AC;˘ October 18, 2014 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ October 18, 2014 â&#x20AC;˘ Page 27

Model #

Operating Weight

Net hp @ rpm

Tail Swing

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

*75 X3 and 80 X3 engines are Final Tier 4

Page 28 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The GMK6300L all-terrain crane At Grove, we provide high-performance features, reliable 24/7 support and a quality product lineup – because cranes are all we do. With 17 all-terrain models ranging from 40-450 USt, we’ve got a crane to handle any jobsite. Featured is the GMK6300L – its 350 USt capacity, 263 ft. boom, Allison transmission and MEGATRAK™ suspension system are ideal for a wide range of applications and will keep you working.

Tilt cab

MEGATRAK™

Removable outrigger box

LEADERS IN LIFTING For more information, visit www.manitowoccranes.com

Kirby-Smith Machinery, Inc.

Western Pacific Crane & Equipment

www.kirby-smith.com

www.wpcrane.com

Oklahoma City, OK 800-375-3339 Tulsa, OK 800-375-3733 Kansas City, KS 877-851-5729 St. Louis, MO 866-279-1392

8600 Calabash Ave. Fontana, CA 92335 562-286-6618 Fax: 909-356-1340 275 W. Larch Road Tracy, CA 95304 209-597-3824

5909 12th Street East Fife, WA 98424 253-254-7950 91-210 Kalaeloa Blvd. Kapolei, HI 96707 808-682-7263

5801 Silverado Way Anchorage, AK 99518 855-342-7263 3521 Alken Street Bakersfield, CA 93308 855-927-2637

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 29

Authorized Doosan Dealers

ALASKA

OKLAHOMA

Craig Taylor Equipment Company

H & E Equipment Services, Inc.

Fairbanks

Oklahoma City

907-452-1192

405-789-7368

www.craigtaylorequipment.com

Tulsa 918-445-2666

ARIZONA

www.he-equipment.com

Ditch Witch of Arizona Phoenix 602-437-0351 888-316-3242

Tucson 520-579-0261 www.ditchwitchaz.com

OREGON Feenaughty Machinery Co., Inc. Portland 503 282-2566 800-875-2566 www.feenaughty.com

CALIFORNIA Berchtold Equipment Company

TEXAS Texas Timberjack, Inc.

Bakersfield

Jasper

661-323-7817

409-384-4611

Santa Maria

Lufkin

805-922-7905

936-634-3367 877-363-1143

www.berchtold.com

www.texastimberjack.com

RGW Equipment Sales Livermore

Venture Drilling Supply

925-606-2403

Georgetown

www.rgwequipment.com

512-869-2974 www.venturedrillingsupply.com

– Todd Hyman, Grand Venture Dairy, LLC Adams, New York

Scott Equipment Fontana 909-822-2200 800-316-0327 www.scottequip.com

WASHINGTON Farmers Equipment Company Burlington

“ 7 days a week, 365 days a year, and the loader has not let us down.”

COLORADO

360-757-6084 888-855-4982 www.farmersequip.com

H & E Equipment Services, Inc. Henderson 303-289-2201 www.he-equipment.com

WYOMING Bobcat of Casper Casper 307-235-6685 www.bobcatofcasper.com

Doosan Delivers DoosanEquipment.com/Todd11

IDAHO Barry Rental, Inc. Twin Falls

Bobcat of Gillette

208-734-4147

Gillette

www.barryrental.com

307-686-4890 www.bobcatofgillette.com

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2014 Doosan Infracore Construction Equipment America. All rights reserved. | 1014209

Page 30 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer:

Buford, GA Battle Creek, MI 678.318.9500 269.965.1269 Forest Park, GA Byron Center, MI Contact your local dealer: 770.319.0074 616.878.7450 Savannah, Kentwood, POWER MI ROMCO GA EQUIPMENT EQUIPMENT CO. 912.964.8079 616.698.2960 www.romco.com COMPANY Lansing, MI Asheville, NC www.power-equip.com 5151 Cash Road 517.272.5033 828.687.0620 Dallas, TX 75247 500 E. 62nd Ave. 214-819-4100 Muskegon, MI Denver, CO 80216 Charlotte, NC Fax: 214-819-4102 303-288-6801 231.798.8754 704.596.8283 Fax: 303-288-6809 Austin New Hudson, MI Greenville, NC Blvd. 1150 Old W. Settlers 2329 River Road 248.356.5200 Round Rock, TX 75681 Grand Junction, CO 81505 252.754.5280 512-388-2529 970-243-0722 Romulus, MI Raleigh, NC 877-851-1026 Fax: 970-243-0726 Fax: 512-388-1781 734.641.8238 919.661.8710 2940 E. Las Vegas St. Saginaw, MI CO Buffalo Bismarck, ND Colorado Springs, 7387 Hwy. 164 80906 989.752.9400 701.250.4882 Buffalo, TX 75831 719-392-1155 903-322-5602 Sterling Hts, MI Fax: 719-390-9604 Fargo, ND Fax: 903-322-5605 586.977.6000 701.271.2360 8806 E. US Hwy. 34 Carmine Johnstown, CO Traverse, MI 80534 Minot, NDHwy. 290 West 17391 US 970-669-6209 Carmine, TX 78932 231.943.3700 701.250.4882 Fax: 970-669-6280 979-278-3570 Wixom, MI Fax: 979-278-3573 Charleston, SC 248.449.6700 Dallas 843.414.1120 ARNOLD 3900 Halifax Wixom, MI SC Dallas, TX 75247 MACHINERY CO. Columbia, (Cons. Division) 214-819-4100 www.arnoldmachinery.com 803.791.0740 800-227-6626 248.356.5200 2975 West 2100 South Piedmont, SC Fax: 214-819-4102 Salt Lake City, Zeeland, MI UT 84119 864.704.1060 Ft. Worth 801-972-4000 616.748.4108 1350 N. E. Loop 820 Fax: 801-975-9434 Chattanooga, TN Ft. Worth, TX 76106 817-626-2288 3330 N. Yellowstone Hwy. 423.308.7940 866-966-4602 Idaho Falls, ID 83401 Knoxville, TN Fax: 817-626-8983 208-523-0822 Fax: 208-523-9918 865.525.1845 Houston 300 East Overland Rd. Meridian, ID 83642 208-887-6000 Fax: 208-887-6013

McALLISTER

EQUIPMENT CO. 464 Washington St. South Twin Falls, ID 83301 208-733-1715 Alsip, IL Fax: 208-734-6924

708.389.7700 1650 East Greg IL St. East Peoria, Sparks, NV 89431 309.694.4455 775-356-1511 Fax: 775-356-0517 Rockford, IL 4136 Donovan Way 815.227.0555 Las Vegas, NV 89030 Springfield, 702-642-9000 IL Fax: 702-642-8808 217.789.0351 4323 East Winslow Villa Park, IL Ave. Phoenix, AZ 85040 630.530.7600 602-414-1900 Fax: 602-414-1904 3350 East Gas Rd. Tucson, AZ 85714 520-294-7677 Fax: 520-294-7670

8450 Breen Dr. Houston, TX 77064 713-937-3005 800-865-6998 Fax: 713-937-7541 Longview 2116 E. Loop 281

Evansville, IN75605 Longview, TX 903-758-5576 812.867.6661 Fax: 903-758-3079 Fort Wayne, IN Rio Grande Valley 260.482.3681 312 Park St. Mercedes, TX 78570 Indianapolis, 956-565-0100 IN Fax: 956-565-1765 317.247.9125 Corbin, KY San Antonio 1042 S. E. Loop 410 606.528.9440 San Antonio, TX 78220 210-648-4600 Louisville, KY 800-966-4601 502.456.4050 Fax: 210-648-1282 Prestonsburg, KY ROL Remote Oilfield 606.874.2104 Location 3610 Interstate 37 St. Louis, MO Three Rivers, TX 78071 361-254-2317 314.487.8925

YOU CHOSE GUARANTEED* FUEL EFFICIENCY WITH EXCEPTIONAL DEALER SUPPORT.

Smart Works. * Ask about our Fuel Efficiency Guarantee by contacting a Volvo dealer near you, or visit volvoce.com/NAFuel to learn more.

Volvo Construction Equipment

Pages 31-39

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Terex AggreSand 165 Washplant Celebrates First Birthday Terex Washing Systems (TWS) is celebrating the first birthday of the Terex AggreSand 165 washplant following the official launch in Ireland in September 2013. A lot has been achieved in the last year, with the successful installation of the AggreSand 165 washplant in five continents over 10 countries, processing up to 11 million tons (10 million t). Garry Stewart, application team lead, TWS, said, “The market has really embraced the AggreSand washplant concept with exceptional demand at the moment. To date, TWS has installed multiple AggreSand 165 washplants around the globe. We are constantly looking at innovative ways to further enhance and develop our existing products so we can continue to meet the individual needs of our customers.” TWS hosted a number of events in 2013 to officially launch the AggreSand 165 in both Ireland and USA. The AggreSand 165 also was displayed as part of a double bill at the Hillhead 2014 show, UK. The most recent event to showcase the AggreSand 165 was at the first of several planned open days in 2014 in the Australia market. The event was hosted by Dubbo Sands, NSW, Australia, where the plant was recently installed. Owners Mardi and Graham Colbran, said “The professionalism and dedication from TWS and Mineral Washing Systems [one of TWS Australian distributors], starting with purchasing right through to commissioning has been outstanding; we feel that there is nothing else currently on the market, that even comes close. We chose the AggreSand 165 washplant for ease of setup, having the ability to minimize disruption to our site. Our AggreSand 165 washplant incorporates the pre

Terex Washing Systems is celebrating the first birthday of the Terex AggreSand 165 washplant following the official launch in Ireland in September 2013.

wash system, which enables us to bring our sand into spec in just one pass, whilst producing three aggregates, giving us a very cost effective operation. The quality of design and construction of this plant is easily seen, a lot of thought has gone into access for servicing to pumps, screens, and the controls, including remote operation from the loader, all of which are user friendly. This plant demonstrates what washing sand should be, easy. We are positive ours will be the first of many hitting Australian shores.” The introduction of the AggreSand 165 concept was in response to both changes in the marketplace and customer

demands, which consists of the AggreSand 165 washplant model and the larger capacity, AggreSand 206 washplant. Central to the development of the AggreSand concept was modular design, serviceability and functionality, making it quick and easy to set-up and easy to maintain. Customers also benefit from the unique design, which includes full containerization of the machine for ease of transportation, rapid set-up time, pre-wired and pre-plumbed plug and play componentry, isolated spray bars and a simple automated control system, all of which have been delivering efficient, productive performance for current owners, according to the manufacturer.

The ongoing TWS commitment to meeting customers’ needs saw the introduction of another new pioneering product in 2014, the AggreScrub 150, designed to operate both as a stand-alone unit as well as having the ability to seamlessly integrate with the AggreSand. The AggreScrub 150 is designed to deal with stubborn clay bound material which cannot be removed by rinsing or screening alone. The AggreScrub product is shortlisted as a finalist in the “World Demolition Awards 2014”, in the “Innovation — Series Product” category. Winners will be announced at an awards ceremony on Nov. 7. The Terex Aggwash plant was the winner of this partic-

ular category in 2010. Since TWS was established in July 2012, the company has gone from strength to strength and is now firmly established as one of the leading material and mineral washing solution providers in the global marketplace. The introduction of three new products over the last year demonstrates the ongoing TWS commitment to meeting customers’ needs through providing pioneering ways to wash sand, gravel, aggregates, wood and C&D waste. As a result of this growth and in response to market demands, TWS has expanded the team globally to provide a full and dedicated line of support for the TWS distributor network and customers. Product Line Director of TWS Sean Loughran said: “We are delighted to continually welcome new talented and skilled team members to the TWS team. The experience they bring will ensure TWS offers the same quality support and services locally as well as in our other centers of excellence in USA and India. TWS is committed to providing first class service, expertise and knowledge in the field of mineral and material washing from initial concept of plant ideas through to after sales service and support.” TWS looks forward to more successful months and years ahead and will continue to focus on introducing further innovative and new solutions for quarry, aggregate, mining and C&D recycling industries, continually meeting customers’ needs and specific washing demands. For more information, visit www.terex.com/washing. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 32 • October 18, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CRUSHING PLANTS

We Call It EXPERTISE. You Call It PEACE OF MIND.

SCREENING Plants

IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers.

Closed-circuit PLANTS

For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.

w w w. i r o c k c r u s h e r s . c o m

Crush. Classify. Profit.

Beast 3680XP, 4680XP Power Through Coastline Vegetation Beast horizontal grinders have always been ahead of the pack when it comes to processing dense, stringy green waste like palms, vines and coastal vegetation. This type of material can be a challenge to process for any machine, but new options and designs for the Model 2680XP, 3680XP and 4680XP Beast Recyclers allow these machines to excel in this type of grinding application, according to the manufacturer. The changes begin with the cuttermill, which features a 30-tooth setup with 2-in. (5 cm) wide teeth as opposed to the standard 60tooth, 1-in. (2.5 cm) wide arrangement. While a 60-tooth set up is still the best for grinding larger diameter wood, in leafy/stringy material void of larger material the 30-tooth setup is extremely efficient. The mill RPM also is increased, which helps clear the mill faster, while the mill housing itself is opened up. Increased tolerances and a larger screening area The cuttermill features a 30-tooth setup with 2-in. (5 cm) wide teeth as opposed to the standard add to the overall machine 60-tooth, 1-in. (2.5 cm) wide arrangement.

throughput, delivering a better endproduct quicker, and with lower fuel consumption. Also, a new proportional drive system for hydraulics on the Beast's feed system will help deliver maximum feeding rates without overfeeding the machine. This new system will monitor engine loads and automatically adjust the feed rate to match. The new system has the ability to not only proportionally feed, but can also switch over to six different feed speeds with the touch of a button for people desiring the most uniform products possible. As a result of these enhancements and options, operators can utilize Beast recyclers to quickly and efficiently process coastal vegetation, viney material and similar green waste that is often problematic with other machines. For more information, call 800/952-0178 or visit www.banditchippers.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide â&#x20AC;˘ Recycling Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ October 18, 2014 â&#x20AC;˘ Page 33

Meet any screening challenge.

LokotrackÂŽ mobile screens Whatever your application, there is a LokotrackÂŽ ST Series mobile screen that can handle it. Metso offers the widest selection of high capacity, dependable screens to meet any challenge, from aggregates processing to demolition and recycling. t &YDFMMFOU TDSFFOJOH DBQBDJUZ t *OUFMMJHFOU QSPDFTT DPOUSPM GPS TBGF BOE easy operation t &BTZ UP NPWF RVJDL TFU VQ t 'MFYJCJMJUZ XJUI B XJEF WBSJFUZ PG TDSFFO NFEJB t &DPOPNJDBM GVFM FGGJDJFOU QSPEVDUJWJUZ t 'VMM DPNQBUJCJMJUZ XJUI -PLPUSBDL -5 DSVTIFST

Lokotrack ST2.8 mobile scalping screen

Contact your local Metso distributor today. www.metso.com/lokotrack

Lokotrack ST3.5

Lokotrack ST2.4

COMPASS EQUIPMENT 4688 Pacific Heights Rd. Oroville, CA 95695 530-533-7284 530-533-8610 Fax: 530-533-7657 www.compassequip.com

CRISP INDUSTRIES, INC. 323 Energy Way Bridgeport, TX 76426 940-683-4070 800-315-0871 Fax: 940-683-2181 South Texas 78155 830-625-6822 Sequin, Texas 78155 830-372-1110

Lokotrack ST4.8

MODERN MACHINERY www.modernmachinery.com 4428 E Trent Ave. Spokane, WA 99212 800-541-0754 509-535-1654 Fax: 509-534-6741

4610 Cloudburst Way Eugene, OR 97402 800-826-9811 541-688-7321 Fax: 541-688-2241

22431 83rd Ave S Kent, WA 98032 800-669-2425 253-872-3500 Fax: 253-872-3519

1257 West Amity Boise, ID 83705 800-221-5211 208-336-8570 Fax: 208-336-8616

19444 Ivan Street SW Rochester, WA 98579 800-304-4421 360-273-4284 Fax: 360-273-4290

2735C Tucker Court Jerome, ID 83338 800-221-5211 208-324-4522 Fax: 208-324-8034

5241 N.E. 82nd Ave Portland, OR 97220 800-950-7779 971-222-1710 Fax: 503-255-1553

2666 Garrett Way Pocatello, ID 83201 800-829-4450 208-233-5345 Fax: 208-235-9658

CUTTING EDGE SUPPLY 234 East O Street Colton, CA 92324 800-949-9014 Fax: 909-825-4569 Phoenix, AZ 800-729-1473 N. Las Vegas, NV 702-649-1303

Page 34 • October 18, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

www.petersoncat.com Northern California 888-738-3776 Oregon/Southern Washington 800-452-7676

Surf the Internet to the News, Equipment and all the information you need to keep up with the Construction industry @

Chico, CA Redding, CA Fortuna, CA Willows, CA Willits, CA Santa Rosa, CA San Martin, CA San Leandro, CA Eugene, OR North Bend, OR Klamath Falls, OR Redmond, OR Medford, OR Albany, OR Portland, OR Salem, OR The Dalles, OR Longview, WA

www.constructionequipmentguide.com

L L I H E H T F O G N I K www.superior-ind.com

Official dealer partner in Texas, Louisiana, Mississippi, Oklahoma & Arkansas

At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determination and energized by progress. How can we help you?

Official dealer partner in Northern California.

The “It’s Only Another Beer” Black and Tan

McCOURT & SONS EQUIPMENT, INC.

COMPASS EQUIPMENT INC.

5141 Hwy 71 West LaGrange, TX 78945 979-242-5298 888-838-9252 www.portablescreen.com

4688 Pacific Heights Road Oroville, CA 95695 530-533-7284 530-533-8610 www.compassequip.com

POWER EQUIPMENT CO. 500 E. 62nd Ave. Denver, CO 80216 800-883-9284 www.power-equip.com Locations: Denver, CO Colorado Springs, CO Grand Junction, CO Casper, WY Albuquerque, NM

8 oz. pilsner lager 8 oz. stout lager 1 frosty mug 1 icy road 1 pick-up truck 1 10-hour day 1 tired worker A few rounds with the guys Mix ingredients. Add 1 totalled vehicle. Never underestimate ‘just a few.’ Buzzed driving is drunk driving.

www.wagnerequipment.com Albuquerque, NM 505-345-8411 Aurora, CO 303-739-3000 Burlington, CO 719-346-7880 Colorado Springs, CO 719-635-1669 Durango, CO 970-259-2001 El Paso, TX 915-821-7651 Farmington, NM 505-327-5331 Grand Junction, CO 970-242-2834 Hayden, CO 970-276-3781 Hobbs, NM 575-393-2148 Pueblo, CO 719-544-4433 Windsor, CO 970-278-1750

www.tractorandequipment.com Billings, MT 406-656-0202 Billings-Southgate, MT 406-245-4426 Bozeman, MT 406-585-5800 Great Falls, MT 406-761-7900 Helena, MT 406-442-2990 Williston, ND 701-572-8377 Worland, WY 307-347-4747

www.ncmachinery.com Seattle, WA 425-251-5800 Chehalis, WA 360-748-8845 Fife, WA 253-896-0878 Monroe, WA 360-805-6000 Mount Vernon, WA 360-424-4292 Port Angeles, WA 360-452-9222 Wenatchee, WA 509-886-5561 Yakima, WA 509-248-2371 Anchorage, AK 907-786-7500 Dutch Harbor, AK 907-581-1367 Fairbanks, AK 907-452-7251 Juneau, AK 907-789-0181 Prudhoe Bay, AK 907-659-9600 Wasilla, AK 907-352-3400

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 18, 2014 • Page 35

www.holtcat.com 800-275-4658 Austin, TX • Bridgeport, TX Corpus Christi, TX • Fort Worth, TX Irving, TX • Laredo, TX Lewisville, TX • Longview, TX North Dallas, TX • Pflugerville, TX San Antonio, TX • Sonora, TX Texarkana, TX • Tyler, TX Victoria, TX • Waco, TX • Weslaco, TX

www.johnson-machinery.com Riverside, CA 951-686-4560 Indio, CA 760-342-1597 Murrieta, CA 951-696-1063 Hesperia, CA 760-947-0967

www.mustangcat.com Houston, TX 713-460-2000 Beaumont, TX 409-892-8412 Bryan, TX 979-775-7368 Bryan, TX 979-775-0639 Channelview, TX 281-452-7368 Conroe, TX 936-756-1110 El Campo, TX 979-543-3389 Freeport, TX 979-233-7368 Houston, TX 713-462-9993 Houston, TX 713-228-7368 LaMarque, TX 409-935-7000 Lufkin, TX 936-639-5551 Lufkin, TX 936-632-6775 Nederland, TX 409-722-7368

Cat.com © 2014 Caterpillar • All Rights Reserved • Printed in USA logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as CAT, CA ATERPILLAR, TERPILLAR, BUILLT T FOR ITT,, their respective resp corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 36 • October 18, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Purpose-built

from the ground up by Material handlers from SENNEBOGEN – 444,000 4,000 llbs. bs. tto o 75 7750,000 0,000 llbs. bs. Simple S imple design… design… Lift Lift more. morre. Mov Movee faster.. Save Save fuel. fuel. Run Run longer. Waukesha-Pearce Industries, Inc. Corporate Office: 12320 So. Main Houston, TX 77035 713/723-1050 • Fax: 713/551-0798 www.wpi.com

Tomball, TX 281/351-9016

Edinburg, TX 956/386-0107

Kilgore, TX 903/984-2011

San Antonio, TX 210/648-4444

Port Arthur, TX 409/721-5305

Pflugerville, TX 512/251-0013

Corpus Christi, TX 361/884-8275

Buffalo, TX 903/322-7150

Bane Machinery Inc.

Modern Machinery

Titan Machinery

www.banemachinery.com

www.modernmachinery.com

www.titanmachinery.com

Dallas, TX 214/352-2468

Fort Worth, TX 817/847-5894

Spokane, WA 800-541-0754

Boise, ID 800-221-5211

Denver, CO 303-286-7000

Omaha, NE 402-733-3700

Kent, WA 800-669-2425

Pocatello, ID 800-829-4450

Fargo, ND 701-237-3333

Sioux Falls, SD 605-336-3434

Rochester, WA 800-304-4421

Missoula, MT 800-332-1617

Portland, OR 800-950-7779

Kalispell, MT 800-434-4190

Eugene, OR 800-826-9811

Billings, MT 800-735-2589

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 18, 2014 • Page 37

CRUSHING

MATERIAL HANDLING

SCREENING

TRACKS

www.tkoequipment.com q p

WASHING & CLASSIFYING

www.modernmachinery.com y

Integrity. Generation After Generation. After being in business for almost a century, we’ve learned a thing or two. We know what it takes to keep your operation running smoothly: Commitment from your crew, quality equipment that works as hard as you do, and people that you can count on.

www.powermotivecorp.com p p

Generation after generation, we continue to meet the demands of the job by building innovative products. We’ve led the way since 1928, and that leadership shows through in the integrity of our team. We’re proud to still be doing business the way we did back then.

Page 38 • October 18, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

One crusher One screen One Lokotrack®

Lokotrack® LT220D™ Metso revolutionizes crushing with the new Lokotrack® LT220D™, combining a highproduction 3-deck screen and industry-leading Metso cone crusher in one compact, selfpropelled track unit. The high-efficiency LT220D™ is truly a game-changer: slashing capital, fuel/maintenance, transport, and overall operating costs. Call your Metso distributor today to learn more or see the innovative new LT220D™ in action! www.metso.com/lokotrack www.facebook.com/lokotrack

CRISP INDUSTRIES, INC.

WESTATE

323 Energy Way • Bridgeport, TX 76426 940-683-4070 • 800-315-0871 • Fax: 940-683-2181 www.crispindustries.com info@crispindustries.com South Texas 78155 830-625-6822 Seguin, TX 78155 830-372-1110

P.O. Box 50370 • Billings, MT 59105 800-999-6676 • Fax: 406-373-6553 www.westate.com

WHEELER CRUSHING SYSTEMS Salt Lake City, UT • Hurricane, UT Ogden, UT • Vernal, UT 800-779-4450 www.wheelercat.com/crushing

COMPASS EQUIPMENT 4688 Pacific Heights Rd. • Oroville, CA 95695 530-533-7284 • 530-533-8610 Fax: 530-533-7657 www.compassequip.com

CUTTING EDGE SUPPLY 234 East O Street • Colton, CA 92324 800-949-9014 • Fax: 909-825-4569 Phoenix, AZ • 800-729-1473 N. Las Vegas, NV • 702-649-1303

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 18, 2014 • Page 39

Attachments can make your machine more valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology.Full product line. Competitive price and performance. Allied offers innovative, problem-solving capabilities. Commitment to product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call us at 1-800-321-1046 or visit AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.

500 E. 62nd Avenue • Denver, CO 80216 303-288-6801 Greeley, CO 970-669-6209

Colorado Springs, CO 719-392-1155

Grand Junction, CO 970-243-0722

www.power-equip.com

Page 40 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Efficiency Shoring Texas Branch Hosts First Open House

n Sept. 26, Efficiency Shoring & Supply’s north Texas Branch Office hosted its first annual open house. Dallas/Ft. Worth area contractors and other customers attended the event. The Open House featured a “trade show” with the following vendors participating: Always There Personnel, Cabelas, Cherne Industries, Delta Rigging, Drager, NUCA North Texas and RemX Specialty Staffing. The grand prize winner of a $500 Cabelas gift card from the Branch’s Summer Sale Promo was Gail Knight of Bear Creek Construction. Danny McGraw of Flint/URS Construction was the winner of the event’s marque door prize, a $300 Cabelas cooler. Outside of the “exhibit hall,” Efficiency set up a full product demonstration area that included steel trench boxes with hi-clearance spreader Arches, Build-A-Box modular aluminum trench shielding system with sheeting guide frame, steel manhole shields, aluminum trench shields with Arch spreaders and Efficiency’s exclusive Quicksheet Guideframe system.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Greg Danoher of Cherne is ready to answer all questions on his company. (L-R): Zach Farrington, Efficiency Shoring & Supply; Larry Oster and George Suarez, both of Delta Rigging; and Keith Gardner, Efficiency Shoring & Supply, congregate at the Delta booth.

Chris Puckett, Efficiency Shoring & Supply, and Julie Puckett, National Anthem Singer, are ready to greet contractors.

(L-R): Tom Thompson of John Burns; Deana Butorac, NUCA North Texas; and Mike Ciotta, Efficiency Shoring & Supply, are all smiles at Efficiency Shoring & Supply’s first annual open house.

Aaron Huber represents the Draeger table.

(L-R): Jennifer Hachmeister of Delany talks with Clifton Place, North Texas Contracting, and Efficiency Shoring & Supply North Texas Branch Manager, Cory Hachmeister.

(L-R): Danny McGraw Jr., Flint URS, is handed the grand door prize, a Cabela cooler, by Chris Puckett and Cory Hachmeister, Efficiency Shoring & Supply.

Shelly Ray (L) and Amanda Nethery represent Always There Personnel.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 41

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states.....................................................................Call

Summit Supply LLC 888-888-1248 • sales@summittracks.us 21-22 TM

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 20-21 DH Call McLaren 888-492-4230

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. 20-21 DH Call McLaren 888-492-4230

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 20-21 DH Call McLaren 888-492-4230

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

CLASSIFIEDS AIR COMPRESSORS Compressors Airman PDS185, CFM Compressor, Quiet, Efficient, Durable, good condition, 1950 hours..........................$10,500.

SPECIAL PRICING!

Call 218-863-6444 www.attachmentsintl.com www.attachmentsusa.com

Asphalt - Misc.

480-695-0672

2007 Dynapac PL2000, 80 in., front loading planer, good condition, 3,000 hrs ......$139,500.

ASPHALT EQUIPMENT

847-437-8686

Asphalt Cutters Attachments International ASPHALT CUTTERS SEVERE SERVICE HIGH SPEED ASPHALT CUTTER Skid Steers, TLB, Loaders, Excavators 14 Models Available

COMPACTION EQUIP. Compaction - Misc. 2007 JCB Vibromax VM115D, 80'', 25,000 lb. w/ pad foot & dozer blade, very good condition, 350 hours ..........$77,900.

EXCAVATORS Hydraulic Excavators 2008 JCB JZ140, zero tail swing excavator, includes bucket, good condition, 2,500 hours..........................$73,500. 2007 JCB JS260, 60,000 lb. excavator includes bucket and quick coupler, good condition, 1,375 hours..............$139,900. 2005 JCB JS220, 50,000 lb. excavator includes bucket, quick coupler and thumb, good condition, 2,600 hrs ..$88,900. 847-437-8686

2007 Dynapac CA134, 54'', 12,200 lb. single drum roller, excellent condition, 300 hours ..................................$43,500.

2007 Doosan DX420, S/N 5119, Excavator with shear hydraulics, Good condition, 5,943 hours..............$120,000.

847-437-8686

440-439-4000

''24-48 hour shipping''

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 Toll Free 1-800/523-2200 Mini Excavators 2006 JCB 8080, 18,000 lb. mini excavator w/ dozer blade, includes bucket, good condition, 2,300 hours........$43,900.

2008 JCB 3CX-15, 15 ft. backhoe w/ extendable dipper, backhoe bucket included, very good condition, 1,700 hours .... ..................................$55,000.

MATERIAL HANDLERS Material Handlers

847-437-8686

1999 Liebherr A932HD, S/N 5316, Material-Scrap Handler, Good condition, 17,968 hrs .... ................................$125,000.

Skid Steer Loaders

440-439-4000

TRAILERS

MMD AMSDG-25S, 20KW Generator, Towable 3 phase Diesel 25KW, good condition, 4,000 hours..................$9,750.

2012 JCB 260, Cab, heat, 2-speed, foot throttle, general purpose bucket, very good condition, 200 hours ................ ..................................$33,000.

480-695-0672

847-437-8686

LOADERS

Wheel Loaders

Backhoe Loaders

2008 JCB 426HT, 2.5 yd. wheel loader, 2.5 yd. bucket, good condition, 1,000 hours .... ................................$115,000.

Wylie Express 500 Water Trailer, 500 gallon, 4hp Honda engine, tandem surge brakes, good condition ............$5,700.

847-437-8686

480-695-0672

847-437-8686 GENERATORS & GEN SETS

Generators & Gen Sets

2006 Allmand TLB 6235, 4WD, 33 HP, good condition, 1220 hours ................$19,995. 480-695-0672

Dump Trailers Felling 6x12 Dump Trailer, 6000 lb. capacity, 5hp Honda engine, good condition $6,500. 480-695-0672

Trailers - Misc.

Page 42 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted I NEED TO BUYCUMMINS KT19 GENSET. CONTACT: IKRAM KHAN PHONE: +92-333-555-5360 EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– LOOKING FOR WELDING TRUCK CONTACT: JOSE PHONE: 347 3516853 EMAIL: JOSELGUARNEROS3@GMAIL.COM –––––––––––––––––––––––––––––––– USED KUBOTA92SV SKID STEER IN GOOD SHAPE CONTACT: GLENN, SIEVE CONSTRUCTION PHONE: 507-227-3780 FAX: 507-736-2199 EMAIL:WWW.GSIEVE@FRONTIERNET.NET –––––––––––––––––––––––––––––––– LOOKING TO BUY USED CATERPILLAR WHEEL LOADERS 920, 926, 930, 936, 938F/G, 950B/C/E/F, 966C/D/E/F/H, 980C/F AND 988B. IF YOU HAVE ANY, PLEASE OFFER ME WITH PICTURES, SERIAL NUMBER, CONDITION, LOCATION AND FINAL OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:INFO@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– LOOKING TO BUY CATERPILLAR WHEEL LOADER 930 BETWEEN 1980 TO 1984 CONTACT: MOHAMED PHONE: 253-232-6772 EMAIL: MERCY1100@HOTMAIL.COM –––––––––––––––––––––––––––––––– WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDED TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PHONE: 2708492270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– PILE HAMMERS | LOOKING TO BUY CLAMSHELL BUCKETS, GRAPPLES, PILE HAMMERS, WINCHES, HOISTS, CRANES & HOOK BLOCKS. CONTACT: GREG PHONE: 724-228-5560 EMAIL: NEEQUIPDIST@AOL.COM –––––––––––––––––––––––––––––––– TERRAMITE T5C USED 1990 THRU 2000, PLEASE CONTACT E MAIL ONLY CONTACT: C,B,BARKER PHONE: 910 564 4931 FAX: NONE EMAIL: EDINA@INTRSTAR.NET ––––––––––––––––––––––––––––––––

PILE HAMMERS | LOOKING FOR USED VIBRATORY AND DIESEL HAMMERS APE _ ICE _ J&M CONTACT: WILLIE EMAIL: WILLIE@PILEMAN.COM –––––––––––––––––––––––––––––––– IT DD70, IR DD25, AND DEERE 410 2004 AND UP | IR DD70, IR DD25, AND DEERE 410 2004 AND UP BOBCAT S185 2010 BOBCAT 325 BOBCAT 323 KOMATSU DOZERS PLEASE EMAIL ME ALL INFO CONTACT: MANSOOR MOLAI PHONE: +16303799175 EMAIL:MANSOOR.MOLAI@GMAIL.COM –––––––––––––––––––––––––––––––– WE WANT TO BUY CATERPILLAR DOZERS D9N & D9R WITH RIPPERS.PLEASE OFFER US & KINDLY SEND US DETAILS, PICTURES & OFFER GOOD PRICE. CONTACT: FAIZ KHAN PHONE: +92-333-3298751 EMAIL:NAQIB_KHANINTRCO@HOTMAIL.COM –––––––––––––––––––––––––––––––– WE WANT TO BUY CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F.PLEASE OFFER US & KINDLY SEND ME DETAILS, PICTURES & OFFER GOOD PRICE. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– DROP DECK TRAILER | 53X102 DROP DECK AIR RIDE TRAILER CONTACT: JOHN MICHALKO PHONE: 262 889 1372 EMAIL: TRUCKERJOHN54@YAHOO.COM –––––––––––––––––––––––––––––––– TRACTOR CAB | ENCLOSED USED CAB TO FIT IHC 684. CONTACT: RON PHONE: 419-565-5429 EMAIL: MH101SUPER@YAHOO.COM –––––––––––––––––––––––––––––––– VANAIR 80 VIPER | PORTABLE AIR 80 CFM CONTACT: ANDY PHONE: 2316725139 EMAIL: ANDY.BOS42@GMAIL.COM –––––––––––––––––––––––––––––––– COMMERCIAL LAWN MOWER 52 IN | COMMERCIAL LAWN MOWER WITH UNDER 200 HOURS AND A 52 IN SIZE DECK NEEDS TO BE A 2012 OR 2013 CONTACT: A732PATCAN@AOL.COM PHONE: 6315862225 EMAIL: A732PATCAN@AOL.COM –––––––––––––––––––––––––––––––– TRACHOE EMAIL: TODDDEB@ARVIG.NET –––––––––––––––––––––––––––––––– INTERNATIONAL TRI AXLE DUMP PAYSTAR 5000 5600 OR 5900 FROM CONTRACTOR 400 HP OR MORE | TRI AXLE DUMP CLEAN 400 HP OR MORE FROM CONTRACTOR. CONTACT: KEVIN PHONE: 856-692-0027 EMAIL: KEVIN@SANSALONEEXCAVATING.COM ––––––––––––––––––––––––––––––––

WE WANT TO BUY CAT WHEEL LOADER 920, 926E, 936E, 950B, 950E, 966D, 966E, 966F, 970F, 980C, 980F, 988B AND 988F IF YOU HAVE ANY FOR SALE PLEASE EMAIL US PHOTOS AND DETAILS LOOKING FORWARD FOR YOUR OFFERS. CONTACT: RIZ SUNESARA PHONE: 832-528-0786 FAX: 281-727-0415 EMAIL:RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WE ARE LOOKING TO BUY CAT MOTOR GRADER 12G, 140G, 14G, AND 140H IF YOU HAVE ANY FOR SALE PLEASE EMAIL PHOTOS AND DETAILS. CONTACT: STEVE PHONE: 713-659-0593 FAX: 281-727-0415 EMAIL: STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– FIELD STRIPING MACHINE | LOOKING FOR A AIRLESS FIELD STRIPING MACHINE CONTACT: RICK PHONE: 518 369 3296 FAX: 518 371 0296 EMAIL: EAC046@NYCAP.RR.COM –––––––––––––––––––––––––––––––– HYUNDAI 4503 | LINDI FINAL DRIVE CONTACT: WILLIAM RENAUD JR PHONE: 207-384-5111 FAX: 207-384-4809 EMAIL:WMRENAUD@COMCAST.NET –––––––––––––––––––––––––––––––– WANT TO BUY NICE CRAWLER LOADER. LIVE IN WEST POINT GEORGIA 706 645 6704 OR CELL 7065019457 CONTACT: CHARLES TRAMMELL PHONE: 7065019457 EMAIL:CCHARLES_JANICETRAMMELL800@YAHOO.COM –––––––––––––––––––––––––––––––– MINI EXCAVATOR 1200018000# | I NEED TO PURCHASE A MINI EXCAVATOR FOR MY GROWING BUSINESS. CONTACT: ADAM PHONE: 518-496-5020 EMAIL: SIPENSONS@GMAIL.COM ––––––––––––––––––––––––––––––––

CAT WHEEL LOADERS | WANTED TO BUY CAT WHEEL LOADER 936E, 950B, 950E, 966D, 966F, 970F, 988B, AND 988F IN RUNNING OR NON RUNNING CONDITION IF YOU HAVE FOR SALE PLEASE EMAIL ME PHOTOS AND DETAILS. CONTACT: STEVE PHONE: 713-659-0593 FAX: 281-727-0415 EMAIL:STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– CASE BACKHOE LOADER 580SK, 580L, 580M AND 580SM | I AM LOOKING TO BUY CASE BACKHOE 580SK, 580SL, 580L, 580SL, 580M AND 580SM IN ANY CONDITION IF YOU HAVE FOR SALE PLEASE CONTACT ME VIA PHONE OR EMAIL. CONTACT: RIZ SUNESARA PHONE: 832-528-0786 FAX: 281-727-0415 EMAIL:RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– CONTACT: AIMN BLBOL PAVER | LOOKING FOR BLAW-KNOX PF PHONE: +971504814823 5510 OR PF3200, THE CLOSER TO FAX: +97165355291 EMAIL:INFO@ALWAFAEQUIPMENT.COM WASHINGTON STATE, THE BETTER. THANKS! –––––––––––––––––––––––––––––––– CONTACT: SANTIAGO SCARZELLA AMCO VEBA 105 3S 5TON | NEW OR PHONE: 3055064263 LIKE NEW CONDITION. TO BE MOUNTEMAIL: SSCARZELLA@GMAIL.COM ED ON A WORKBOAT. –––––––––––––––––––––––––––––––– CONTACT: ROGER APPLEWHITE TELESCOPIC FORKLIFT | 4-6 TON TELPHONE: 228-217-4135 ESCOPIC FORKLIFT DIESEL 12-14M EMAIL: RAPPLE34@CABLEONE.NET 1999-2002 GOOD CONDITION –––––––––––––––––––––––––––––––– CONTACT: WILFRED OBENGSACKEY LOADER FOR MASSEY 390 4WD | SEC- PHONE: 233264495065 OND HAND LOADER TO FIT MASSEY EMAIL:SACKSONLOGISTICS@GMAIL.COM 390 4WD –––––––––––––––––––––––––––––––– CONTACT: RICHARD FITZGERALD TERRAMITE BACKHOE, USED | TERPHONE: 00353860437770 RAMITE BACKHOE USED 4X4 DIESEL EMAIL:RICHARDFITZGERALD3@HOTOR GAS. 2003-4-6 MAIL.COM CONTACT: ALAN –––––––––––––––––––––––––––––––– PHONE: 903-681-2064 CAT D6R AND D7R 9903 | WE ARE EMAIL: COLEYOUNGER76@GMAIL.COM LOOKING FOR D6R AND D7R 1999-2002. –––––––––––––––––––––––––––––––– RUNNING CONDITION WITH PICTURES. DIESEL TANK FOR TOWABLE INGERSOLL RAND AIR COMPRESSOR | THIS THANKS. IS AN OLD, DETROIT MADE PORTABLE CONTACT: MICHAEL INDUSTRIAL AIR COMPRESSOR THAT EMAIL: AMEARTH@HOTMAIL.COM YOU TOW TO WORK SITE. NEED –––––––––––––––––––––––––––––––– REPLACEMENT DIESEL GAS TANK AND DYNAPAC CA12 AXLE | NEED REAR COMPANY DOES NOT STOCK PARTS AXLE FOR DYNAPAC CA12. WOULD OLDER CAT 320 OR CAT 215, CAT 225 | PURCHASE ENTIRE NON-RUNNING THIS OLD. SEEKING AN OLDER MODEL CAT 320 IN MACHINE. CONTACT: RJ THE MID 1990 RANGE OR CAT 215/CAT CONTACT: NEIL PHONE: 801-597-7314 225 OLD BUT IN OPERATING CONDIEMAIL: RSSMTCH@GMAIL.COM PHONE: 320-763-4491 TION. ONLY SEEKING ONE UNIT. CON–––––––––––––––––––––––––––––––– EMAIL: NEIL@AMERIGEN.NET TACT ME VIA EMAIL ONLY WITH PHO4400 GPM POSITIVE DISPLACEMENT –––––––––––––––––––––––––––––––– TOGRAPHS AND CONDITION INFORMA- D9R | WE LOOKING FOR BULLDOZER PUMP | SECOND HAND POSITIVE DISTION. PLACEMENT PUMP CAPACITY: 3300 D9R AND D9N MANUAL FROM 1988 UP CONTACT: JEFF LAWSON 4400 GPM CAPACITY: 750 - 1000 M3/HR TO 1997 WITH RIPPER SINGLE SHANK EMAIL: JLAWSON29321@CHARTER.NET PRESSURE: 16 - 20 BAR PRESSURE: CONTACT: OUFI –––––––––––––––––––––––––––––––– 230 - 290 PSI TEMPERATURE: 60 C PHONE: 966530185141 USED TIGER MOWER | DESCRIBE TEMPERATURE: 140 F VISCOSITY OF FAX: 9660127512024 WHAT YOU WANT. MEDIUM: 2115 CP MEDIUM: CRUDE OIL EMAIL:ALOUFI01@HOTMAIL.COM CONTACT: CONTACT NAME LOCATION OF PLANT: MALAYSIA –––––––––––––––––––––––––––––––– EMAIL: MEREDITH967@VERIZON.NET CONTACT: SYAZWAN ELIAS SS RIPER FOR CAT D9N OR D9R | WE –––––––––––––––––––––––––––––––– EMAIL: SYAZE.87@GMAIL.COM WANT TO BUY SS RIPPER FOR CAT WHEEL LOADERS | I AM LOOKING TO –––––––––––––––––––––––––––––––– D9N OR D9R. THE RIPPER CAN BE BUY USED CATERPILLAR WHEEL CAT 950B, CAT 950E | I AM LOOKING USED OR REBUILT IF WELL PRICED. LOADERS 920, 926, 930, 936, 938F/G, FOR CAT WHEEL LOADERS 950E AND CONTACT: TIAGO DONATO 950B/C/E/F, 966C/D/E/F/H, 980C/F AND 950B, PLEASE FEEL FREE TO CONPHONE: (305) 909-9743 988B. IF YOU HAVE ANY, PLEASE TACT ME, IF YOU HAVE AVAILABLE OR EMAIL:EQUIPMENTSALES@JAXMAOFFER ME WITH PICTURES, SERIAL ANY UP COMING UNIT. REGARDS NUMBER, CONDITION, LOCATION AND CHINERY.COM ROYAL MACHINERY TRADERS FINAL OFFER PRICE. –––––––––––––––––––––––––––––––– CONTACT: ROYAL TRADERS USA.

EMAIL:ROYALMACHINERYTRADERS @GMAIL.COM –––––––––––––––––––––––––––––––– NATIONAL CRANE BOOM SECTIONS | LOOKING FOR TELESCOPIC BOOM SECTIONS FOR A 880 SERIES NATIONAL CRANE CONTACT: MIKE ACHTOR PHONE: 847-782-0672 FAX: 847-782-0673 EMAIL:PROCISIONBORING@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– 20 FEET TRAILER WITH 10 TIRES CONTACT: VIJAY PHONE: 9444411691 EMAIL: IE@JRMETALCHENNAI.COM –––––––––––––––––––––––––––––––– CATERPILLARS DOZER D7H AND G | WANTED GOOD USED CATERPILLARS BULLDOZER D7H AND D7G CONTACT: GABRIEL FOTSO PHONE: 2027101655 EMAIL: TOKAMGABI@YAHOO.FR –––––––––––––––––––––––––––––––– GOOD USED SCHWING BOOM TRUCKS | SCHWING W/MACK TRUCK MOUNTED CONCRETE BOOM TRUCKS 1994 & NEWER 32M TO 39METER CONTACT: WILLIAM CROSS PHONE: 407 595 8221 FAX: 407 843 0136 EMAIL:WILLIAM@CROSSPUMPING.COM –––––––––––––––––––––––––––––––– 544G MANUAL PEMBERTON QUICK COUPLER | 544G / E MANUAL QUICK COUPLER 544G 20.5 X 25 WHEELS AND TIRES, WILL TRADE FORESTRY TIRES AND WHEELS. CONTACT: MICK PHONE: 352-400-5026 EMAIL: MICK.FIELDS@FIELDCO.BIZ –––––––––––––––––––––––––––––––– BANDIT254/WOODCHUCK | PREFER DIESEL AND GOOD WORKING CONDITION CONTACT: CELIA PHONE: 1(806)665-4274 FAX: 1(806)665-4275 EMAIL:79107CELIAH@GMAIL.COM –––––––––––––––––––––––––––––––– KW DUMP TRUCK CONTACT: JOEL VANDER HEIDEN PHONE: 563-357-6273 EMAIL: JVH@FBCOM.NET –––––––––––––––––––––––––––––––– MUSTANG LOADER BUCKET | I AM LOOKING FOR A USED BUCKET WITH TEETH FOR MY 2003 MUSTANG MTL20 LOADER CONTACT: MIKE IPSAN PHONE: 703-675-3375 EMAIL: MIKEHORIZON@GMAIL.COM –––––––––––––––––––––––––––––––– INTERNATIONAL TD8C POWER SHIFT TRANSMISSION CONTACT: ROGER PHONE: 5706393058 EMAIL: ROGERPF1@FRONTIERNET.NET –––––––––––––––––––––––––––––––– TRAIL KING BELL TRAILERS CONTACT: SALVADOR PHONE: 575 317 1752 EMAIL: H.HTRUCKING@YAHOO.COM ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 43

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Racine, WI Sat., October 18, 2014 For: Late Model Construction & more • Kissimmee, FL Wed., October 22, 2014 For: Late Model Rental Equipment & more • Queretaro, Mexico Fri., October 24, 2014 For: Late Model CAT Equipment • Bangor, ME Sat., October 25, 2014 For: Late Model Construction & Rental Fleet Equipment • Parkersburg, WV Fri., October 31, 2014 For: Late Model Oilfield Equipment • Columbus (Delaware), Ohio Sat., November 1, 2014 For: Late Model Construction Equipment & more • Brooklyn, NY Tues., November 4, 2014 For: Industrial Equipment. Part 1 of 2 day sale. • Saginaw, MI Wed., November 5, 2014 For: Land Clearing Equipment • Wilkes Barre, PA Wed., November 5, 2014 For: Industrial Equipment. Part 2 of 2 day sale. • Port Huron, MI Thurs., November 6, 2014 For: Major Job Completion • Rochester, NY Fri., November 7, 2014 For: Trucking Company Liquidation

For: Rental Fleet Construction Equipment & more • Kissimmee, FL January 31 – February 8, 2015 For: 22nd Annual Construction Equipment, Trucks & more RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Chehalis, WA October 22, 2014 • Orlando, FL October 23, 2014 • Wessington Springs, SD October 23, 2014 • North East, MD October 28, 2014 • Hobbs, NM October 30, 2014 • Pittsburgh, PA November 6, 2014 • Albuquerque, NM November 7, 2014 • Champaign, IL November 11, 2014 • Houston, TX November 12-13, 2014 • Boise, ID November 14, 2014 • New Braunfels, TX November 14, 2014 • Phoenix, AZ November 18, 2014 • Tipton, CA November 19, 2014 • East Brunswick, NJ November 20, 2014

• Canastota, NY Sat., November 8, 2014 For: Late Model Construction Equipment & more

• Williston, ND November 20, 2014

• Cato (Syracuse), NY Sun., November 9, 2014 For: Buses and Light Construction Equipment

• Atlanta, GA December 2, 2014

• Houston, TX Tues., November 11, 2014 For: Rentals! Late Model Construction & Support Equipment & more • Gary, IN Fri., November 14, 2014 For: Complete Liquidation Concrete & General Contractor • Boston, MA Sat., November 15, 2014 For: Late Model Snow Removal & Construction Equipment • Waterloo, IA Thurs., November 20, 2014 For: Complete Liquidation Earthmoving Equipment • Manassas, VA Fri., November 21, 2014 For: Late Model Construction Equipment and more • Dallas, TX Tues., December 2, 2014 For: Late & Great Rental Fleet Construction Equipment • Atlanta, GA Wed., December 3, 2014 For: Construction Equipment, Support & Trucks • Las Vegas, NV Sat., December 6, 2014 For: Large Rental Return Auction • Odessa, TX Tues., December 9, 2014 For: Rental Fleet Construction Equipment & more • Atlantic City, NJ Sat., December 20, 2014 For: Late Model Rental Returns • Albany, NY Sat., December 27, 2014

• Las Vegas, NV November 21, 2014

• Fort Worth, TX December 3-4, 2014 • Nashville, TN December 9, 2014 AUCTION ADVISORS www.auctionadvisors.com 888-243-3431 • Hackettstown, NJ Mon., October 20, 2014 For: Liquidation Auction of Major NE Rigging Company BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Riverside, CA Sat., October 18, 2014 For: Public Heavy Equipment Auction • Portland, OR Thurs., November 13, 2014 For: Public Heavy Equipment Auction BIG IRON www.bigiron.com 800-937-3558 • ONLINE ONLY October 22, 2014 • ONLINE ONLY October 29, 2014 • ONLINE ONLY November 5, 2014 • ONLINE ONLY November 12, 2014 • ONLINE ONLY November 19, 2014 • ONLINE ONLY November 26, 2014

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com BLACKMON AUCTIONS, INC. www.blackmonauctions.com 501-352-4703 • Wilburton, OK Wed., November 5, 2014 For: Booth Environmental Auction • Van Buren, AR Tues., November 11, 2014 For: Arklahoma Pipeline Auction CAT AUCTION SERVICES www.catauctions.com 866-750-9432

• Rockford, IL Fri., October 24, 2014 For: Northern Illinois & Wisconsin Consignment Auction EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218 • Wills Point, TX November 6-7, 2014 For: 2 Day Auction Event

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

• South Beloit, IL Sat., October 23, 2014 For: Heavy Equipment

• ONLINE ONLY Tues., October 21, 2014 For: Truck & Trailer Auction

• Boston, MA Thurs., October 25, 2014 For: Heavy Equipment • Kansas City, MO Thurs., November 6, 2014 For: Heavy Equipment • Philadelphia, PA Thurs., November 8, 2014 For: Heavy Equipment • Charlotte, NC Sat., November 13, 2014 For: Heavy Equipment

• ONLINE ONLY Thurs., October 23, 2014 For: Construction Equipment • ONLINE ONLY Thurs., November 6, 2014 For: Construction Equipment • ONLINE ONLY Thurs., November 20, 2014 For: Construction Equipment

• Portland, OR Thurs., November 20, 2014 For: Heavy Equipment

SCOTT PERRY & CO. www.scottperryco.com 716-283-7653

• Rome, NY Sat., November 22, 2014 For: Heavy Equipment

• Savona, NY Wed., October 29, 2014 For: NYS Dept. of Environmental Conservation

• Questa, NM October 22-23, 2014 For: Complete Mining Liquidation

GUINN AUCTION COMPANY www.guinnauctions.com 337-824-0422

• Pittsburgh, PA Thurs., October 30, 2014 For: Construction Equipment

• Jennings, LA Sat., November 1, 2014 For: Heavy Construction Equipment & Oilfield Trucks

• Atlanta, GA Thurs., December 11, 2014 • West Palm Beach, FL Sat., December 13, 2014

• Pittsford, NY Wed., November 5, 2014 For: NYS Dept. of Transportation

• Oklahoma City, OK Tues., November 18, 2014 For: Construction Equipment

HILCO INDUSTRIAL, LLC www.hilcoind.com 877-37-HILCO

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888

• Batavia, NY Thurs., November 6, 2014 For: NYS Police – Troop “A”

• ONLINE ONLY Wed., November 19, 2014 For: eQuipment Yard

• ONLINE ONLY Wed., November 5, 2014 For: City of Detroit Major Municipal Auction

• ONLINE ONLY October 20 - 27, 2014 For: Machine Shop Equipment, Pumps, Tools, Presses & more

• Las Vegas, NV Fri., November 14, 2014 For: Construction Equipment

• Warner, NH Fri., November 21, 2014 For: Construction Equipment • Denver, CO Thurs., December 4, 2014 For: Construction Equipment • Minneapolis, MN Tues., December 9, 2014 For: Construction Equipment • Lancaster, PA Thurs., December 11, 2014 For: Construction Equipment • ONLINE ONLY Wed., December 17, 2014 For: eQuipment Yard • Kissimmee, FL Fri., February 13, 2015 For: Construction Equipment COCHRAN AUCTIONS www.cochranauctions.com 301-739-0538 • Washington County, MD November 6-8, 2014 For: Trucks, Trailers & Equipment DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.com 800-433-6670 • Harrison, MI Thurs., October 23, 2014 For: Construction Equipment, Trucks & Trailers DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., December 13, 2014 For: Construction Equipment DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Lucasville, OH Sat., October 18, 2014 For: 10th Annual Southern Ohio Consignment Auction

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Livingston, NJ Wed., November 12, 2014 For: Complete Liquidation Jogi Construction, Inc. I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., December 5, 2014 For: Heavy Construction Equipment, Truck & Trailer IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid!

• Lansing, MI Thurs., December 6, 2014

• Pelzer, SC November 14-15, 2014 For: Construction Equipment

• ONLINE ONLY October 29, 2014 • ONLINE ONLY October 30, 2014

• Newark, NY Fri., November 7, 2014 For: NYS Office for People With Developmental Disabilities SHETRON AUCTIONS www.shetronequipment.com 717-532-8828

• Chesapeake, VA Tues., October 28, 2014 For: Construction Equipment & Trucks

• Shippensburg, PA Fri., October 31, 2014 For: Construction & Farm Equipment

NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322

• Shippensburg, PA Fri., December 19, 2014 For: Construction & Farm Equipment

• Wrentham, MA Sat., October 18, 2014 For: Construction Equipment

UTILITY AUCTIONS www.utilityauctions.net 302-530-9103

NITKE AUCTIONS www.nitkeauctions.com 715-693-4447

• Wilmington, DE Fri., October 24, 2014 For: Construction, Utility & Forestry Equipment

• Wausau, WI October 24 - 25, 2014 For: 49th Annual Contractors Auction PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • Newark, NJ Thurs., October 30, 2014 For: Heavy Construction Equipment & more

• ONLINE ONLY November 19, 2014

• South Windsor, CT Fri., November 7, 2014 For: Complete Dispersal – Folsom Construction, LLC

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

• Plaistow, NH November 14-15, 2014 For: Complete Dispersal – S&R Construction Enterprises

• ONLINE ONLY Wed., October 29, 2014 For: Public Surplus Liquidation Auction

• Bristol, CT Fri., December 5, 2014 For: Major Equipment Liquidation

• Brooklyn, MS November 21-22, 2014 For: 2 Day Fall Public Auction

• Canandaigua, NY Thurs., November 6, 2014 For: NYS Police – Troop “E”

MOTLEY’S AUCTION GROUP www.motleys.com 804-232-3300

• ONLINE ONLY October 23, 2014 • ONLINE ONLY October 24, 2014

• North Syracuse, NY Thurs., October 30, 2014 For: NYS Dept. of Transportation

• North Franklin, CT December 19-20, 2014 For: Major Public Auction – Area Contractors & Equipment Dealers

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-5700 • Princeton, MN Sat., December 6, 2014 For: Heavy Equipment YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Berlin Center, OH Tues., October 21, 2014 For: Construction Equipment, Trucks & Trailers • Darlington, PA Thurs., October 23, 2014 For: Construction Equipment, Trucks & Trailers • Kissimmee, FL February 9-16, 2015 For: 41st Annual – 7 day Auction

Page 44 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BusinessCalendar

To view our Business Calendar online, go to www.constructionequipmentguide.com.

SAVE THE DATES!!! CRC CANADA – The 4th Annual CRC Canada Returns to Edmonton this Fall DATES: OCTOBER 20-21, 2014 The Crane & Rigging Conference (CRC) Canada will return to the Marriott at River Cree Resort, Edmonton, Alberta on October 2021, 2014. Now in its fourth year, the event will stay at the location of the 2013 conference which received rave reviews from attendees. CRC Canada 2014 will be supported by Industrial Training International (ITI) Canada ULC, Event Partner; LiebherrCanada Ltd., Associate Sponsor; and Crane & Hoist Canada, Media Partner. Additionally, organizer Maximum Capacity media has confirmed that the Canadian Hoisting & Rigging Safety Council (CHRSC) will again participate as a Supporting Organization. REGISTER NOW!!! For more information on this event, you may contact CRC Canada direct at 888/608-0330. AGC OF MINNESOTA Employment & Labor Law Conference for Manufacturers Join us for a fast-paced ½ day conference on current employment and labor law issues that affect manufacturers. All topics of this conference will address both MN & WI laws. Event Details: DATE: WEDNESDAY, OCTOBER 22, 2014 TIME: 12:00 NOON to 5:30 PM LOCATION: Radisson Hotel Duluth; 505 W. Superior Street, Duluth, MN LUNCH: Buffet Lunch SOCIAL HOUR: Appetizers and Two Hosted Drinks Per Person COST: $20 Per Person For Questions or Special Needs: Please Contact: Steph Davis at stephd@runestone.net or call 877/330-2632

Mark Your Calendar for GIE+EXPO 2014 OCTOBER 22 to OCTOBER 24, 2014 WEDNESDAY, OCT 22 – FRIDAY OCTOBER 24 Green Industry Conference and School of Grounds Management WEDNESDAY, OCT 22 Dealer Day; Reception on the Tradeshow Floor and Free Concert at 4th Street Live! THURSDAY, OCT 23 GIE+EXPO open to all industry participants, plus Free Concert at 4th Street Live! FRIDAY, OCT 24 Indoor – 9 AM to 5 PM and Outdoor – 9 AM to 4 PM, plus Free Concert at 4th Street Live! Excellent timing for manufacturers to show their complete new lines…750 Exhibits throughout 500,000 sq. ft. inside the Kentucky Exposition Center and in the turf area outside…19 acres of outdoor demonstrations and test driving, adjacent to the indoor exhibits…seminars to boost your efficiency and bottom line…convenient mid-America location within driving distance of 60% of America’s population…Networking opportunities. For more information, email: info@gie-expo.com.

employers in 2015. Now is the time to make sure your company is ready to report. Join us for a “walk” through the new forms, with lots of opportunities to ask questions. Everyone in your firm who has responsibility for insurance or employee benefits should attend this seminar. Presenter: Monica Kelley, Esq., Gray Plant Mooty Seminar: 7:30 AM to 9:30 AM Registration Fee: $25 per person (includes breakfast) Register: Online at www.agcmn.org Questions??? Contact Denise Woods, 651/796-2186 or dwoods@agcmn.org

TRIMBLE DIMENSIONS 2014 IS THE PLACE TO BE IN NOVEMBER. REGISTER NOW! NOVEMBER 3 thru 5, 2014 LAS VEGAS, NEVADA Trimble Dimensions User Conference 2014 is the must attend conference for industry professionals such as yourself. Haven’t attended in the past? Well, here’s what you’ve been missing! . Over 400 sessions lead by industry experts . Pavilion with the latest technology showcased . Unlimited networking opportunities . Peer-to-peer collaboration . Professional Development House (PDH) AGC OF MINNESOTA . Hands-on training MN CONSTRUCTION CREW – 2nd ANNUAL INFO EXPO . Special events – plus more! DATE & TIME: Tuesday, October 28th at 9:00 AM to 12:00 PM Dimensions 2014 is the place to be in November. Discover LOCATION: Carpenters Union Hall first-hand how you can transform the way you work by inte710 Olive Street, Saint Paul, MN grating advanced positioning technology, field and office appliWebsite: www.northcoutnrycarptenter.org cations and real time communications. PURPOSE: To provide access and information about training For more information, contact: www.TrimbleDimensions.com opportunities and upcoming projects in the construction indus- or Email: Trimble_Dimensions@Trimble.com. try. This event will focus on how people can get trained for specific skills and trades even if it is preparing within their current AGC OF MINNESOTA trade. Contractors will also be available to discuss with atten- CONSTRUCTION FINANCIAL MANAGEMENT CONFERENCE dees information about large projects that will be starting in the NOVEMBER 5 THROUGH 7, 2014 IN LAS VEGAS, NEVADA next 1-2 years. The AGC/CFMA Construction Financial Management Conference If you have any questions or need additional information, please will be held on November 5 – 7, 2014 in Las Vegas, Nevada. email: John.Ophelan@co.ramsey.mn.us. Get the latest information on: Construction Market Trends; Thank you for your continual support in this outreach initiative!!! Financial Accounting Standards Board; Surety, Financial, and Credit Markets, Change Order and Claims Management; Federal AGC OF MINNESOTA acquisition regulations; construction taxes; strategies for ecoHealth Care Reform Seminar: A Refresher Course and a nomic conditions; business real estate management; ethics and Primer on New Reporting Requirements – OCTOBER 30, 2014 fraud. Register before September 5th: $780/After September at the Radisson Hotel, Roseville, MN 5th: $860. Conference Details are available at http://meetReady or not, health care reform is kicking into full gear for ings.agc.org/agc _cfma.

Ohio Aggregates & Industrial Minerals Association (OAIMA) OAIMA 2014 Annual Meeting & Trade Show Hilton Columbus Hotel, Easton Town Center, Columbus, Ohio Dates: November 13-14, 2014 Hotel Information: Hilton Columbus Easton 3900 Chagrin Drive Columbus, Ohio 43219 Telephone: 614/414-5000 AGC of MINNESOTA SAVE THE DATES!!! . December 4th – Presidents/Holiday Reception, Minnesota History Center, St. Paul . December 11th – AGC/MnDOT Grading and Base Technology Forum The Minneapolis Boulevard Hotel, Brooklyn Center . January 15th – 95th Annual meeting, Minneapolis Marriott Southwest, Minnetonka DETAILS of each will be available over the coming weeks! CRC/ICHC 2014 Crane & Rigging Conference / Industrial Crane & Hoist Conference DATES: December 3 – 4, 2014 LOCATION: Hilton Houston Nasa Clear Lake Hotel, Houston, TX The event will be held adjacent to the Space Center Houston and NASA’s Johnson Space Center. CRC/ICHC (Crane and Rigging Conference/Industrial Crane and Hoist Conference) is an independent conference which offers education and networking opportunities for safety and risk managers, crane and rigging supervisors, lift directors, project managers, and others responsible for managing crane and rigging operations in construction and heavy industry. More than just a lecture-style conference, CRC/ICHC offers attendees opportunities for networking in small groups, experiencing hands-on learning, and the chance to visit vendors during exhibit hours. Who Attends? Typical attendees include contractors, engineering firms, various construction user groups, unions, and crane and rigging professionals. The conference sessions are geared for safety and risk managers, crane and rigging supervisors, fleet managers, and small business owners. To submit a speaker proposal, go to https://maxcapmedia.wufoo.eu/forms/crcichc-2014call-forspeakers/. For more information on exhibiting, contact Mark Bridger, mbridger@maxcapmedia.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 45

Page 46 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Third, Final Phase to Include Old Courthouse Renovation

The new projects are two blocks from the county’s original courthouse, built in 1922 at a time when the county population was only about 12,000. Today, it’s nearly nine times that amount at about 105,000. PROJECT from page 1

were made available during the downtown to shovel-ready projects The new projects are two blocks from the county’s original courthouse, built in 1922 at a time when the county population was only about 12,000. Today, it’s nearly nine times that amount at about 105,000. The drive behind the project is to move county staff out

of the courthouse so the courthouse can expand court space. The $4.5 million addition of two floors and a roof to the parking structure was the first project to be completed in the Rapid City master plan. That job, completed by local contractor Heavy Constructors, called for the closure of one street for about the length of a block and for at least one very big piece of equipment. “It was a Manitowok 1600 crane

Scull Construction Services worked a tight schedule to build a new evidence facility while the original remained intact.

The $4.5 million addition of two floors and a roof to the parking structure was the first project to be completed in the Rapid City master plan. That job, completed by local contractor Heavy Constructors, called for the closure of one street for about the length of a block and for at least one very big piece of equipment.

with a 300-foot boom, capable of lifting 400 tons,” Kuhl said. “It did draw some attention. They had to lay a lot of large old railroad ties on the street to keep it from breaking the street up.” Next up, Scull Construction Services worked a tight schedule to build new evidence facility while the original remained intact. “It was actually a metal building that had to be demolished to make way for the new administration

building,” Kuhl said. “We had some phasing to coordinate. We had to do some foundation work before the administration building was built. That required some coordination as there was a limited amount of time to execute that move. We only built a month into our schedule to get that move happening. Of course there wasn’t a lot of flexibility built in there. To keep everything on schedule, the contractor was still trying to some testing and balancing on the evidence building while we were moving in.” The evidence building also houses the energy plant for the administration building. “It is a geothermal system,” Kuhl said. “Underneath the parking lot, we have a number of wells drilled to help us generate — pull heat from or reject heat into the ground — through a multi-stage chiller system. It produces the heating and cooling water for the facility.” The administration building is constructed of brick and precast concrete and features significant glass curtains, Kuhl said. Once the ribbon cutting ceremony occurs on Oct. 24, the county will turn its attention to the third phase of the project — renovation work on the old courthouse. The $9.75 million renovation will include the addition of about 24,000 sq. ft. to the existing 60,500

sq. ft. building. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

After three years of construction, Pennington County, S. D., is ready for the October ribbon cutting on the centerpiece of a multi-phase project that includes an expanded parking garage, a new criminal evidence building and a $31 million, 100,000-sq.-ft. administration center.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 47

The new way to buy used equipment Low, no-haggle pricing. Inspected. Ready for work. Guaranteed.

2007 Skytrak 6042 T elehandler e – $24,500 Telehandler

2006 Mitsubishi FG25N Pneumatic Tir e Forklift For Tire – $10,500

BUY ONLINE

2005 JLG 1930ES Electric Scissor Lift – $4,000

2003 Bobcat S185 Skid-Steer Loader – $14,500

2007 Bobcat 325G Mini Excavator – $15,900

2007 Case 580M Series 2 4x4 Backhoe Loader – $33,900

2005 JLG E450AJ Electric Articulating Boom Lift – $20,900

Equipment featured are a representation of items available on allEquip. Items are sold and added to inventory daily.

Visit Visit allEquip.com or call 855-827 855-827-1515 -1515

Page 48 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ONE OWNER AUCTIONS

(16) DOZERS, (15) EXCAVATORS, PIPELINE, OILFIELD, TRUCKS, LOWBOYS, MORE BOOTH ENVIRONMENTAL - NOVEMBER 5 - WILBURTON, OKLAHOMA

Backhoes (4) Caterpillar 420 Backhoes Compactors 1996 Bomag BW213PDB Compactor 2007 Sakai SV510T-II Compactor 2001 Caterpillar CS-563D Compactor Cranes 2001 Terex RT230 Rough Terrain Crane Terex CD225 Rough Terrain Crane

Dozers (3) 2007 - 2002 Caterpillar D6R Dozers 2002 Caterpillar D6M XL Dozer 2000 Caterpillar D8R Dozer Mulcher 2009 Terex PT100 RT w/Tushogg Mulch Head Loaders 2005 Komatsu WA320 Wheel Loader (2) 2002 Caterpillar 246 Skid Steer Loaders

Grader 2006 Caterpillar 140H Grader Excavators 2010 Caterpillar 320DL Excavator 2006 Caterpillar 320CL Excavator 2002 Cat 320CL + Wacker G85 Aux Power 2007 Caterpillar 324DL Excavator 2007 Caterpillar 325CL Excavator 2006 Caterpillar 315CL Excavator

Articulated Truck 2002 Caterpillar 725 Articulated Truck Forklift & Kershaw Cutter 2008 Caterpillar TL642 Forklift Kershaw Klearway 800 Right of Way Mower AND over 200 More items - Dump Trucks, Haul Trucks, Lowboys, Goosenecks, Loader Tractors, Hammers, Gen Sets, Welders, Pipeline Equip, Pickups...

Dozers & Siidebooms 2001 Cat D6R Dozer, Winch, S#5LN02995 2002 Cat D6M XL Dozer, Winch, S#3WN02827 2002 CatD5M XL Dozer, S#3CR01985 1994 Cat D6H XL Dozer, Winch, S#9LK00489 (6) Caterpillar Sidebooms & Tack Tractors

Excavators 2006 Cat 325DL Excavator, S#PAL00262 (3) 2007 & 2006 Cat 320CL Excavators 2007 Komatsu PC200LC7 Excavator, S#C60767 2006 JohnDeere 200C LC Excavator, S# 505780 1997 Samsung SE210LC Excavator, S#FCY0195

Mud Mixer 2000 Tulsa Rig Iron Mud Mixer Forklift 2003 Gehl DL10H-55 Telescopic Forklift Trenchers Tesmec TRS1000 Rock Saw/Trencher, S#220

Barber Green Bucket Ditcher, S#TA-30X176 More… Water Trucks, Haul Trucks, Pickups, Lowboys, Athey Wagon, Rolligon Style Trailer, (5) Welders, (5) I-R Compressors, (6) Hydraulic Hammers & More

A R K L A H O M A P I P E L I N E - N O V E M B E R 11 - V A N B U R E N , A R K A N S A S

BLACKMON AUCTIONS, INC. www . bl a ck m o na u ction s . co m Established in 1938

PO Box 7464, Little Rock, AR 72217

501-352-4703

Estimated Costs Up for River Dam TULSA, Okla. (AP) A memo sent to the Arkansas River Infrastructure Task Force estimates the cost to build or refurbish four low-water dams in the Arkansas River has risen by $80 million. The latest estimate for the work on the dams is $266 million, up from the original estimate of $186 million, Tulsa World reported. The total cost for the river project is now estimated at $300 million, including $34 million for levee system repairs. City Councilor and Task Force Chairman G.T. Bynum said the news is frustrating but the additional costs reflect related work that must be done as part of the projects. It’s also hard to estimate costs because the design documents for three of four dams are 10 percent complete or less. The estimates include construction of low-water dams in Sand Springs, south Tulsa/Jenks and Bixby and the refurbishment of Zink Dam in Tulsa. The new figures include estimates for stabilizing banks and environmental mitigation. They assume work will take place as late as 2020. He previously said he hoped to have a funding package for voters to weigh in on as early as the spring, but he said Sept. 11 it could be another six to 12 months before design work allows for more accurate estimates. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 49

Industry Continues Recovery INDUSTRY from page 1

the gains remain uneven. The industry appears likely to experience very mixed results by segment and region for the rest of 2014 and into next year.” Houston-Sugar Land-Baytown, Texas, added the largest number of construction jobs in the past year (10,900 jobs, 6 percent), followed by Chicago-Joliet-Naperville, Ill. (9,900 jobs, 8 percent), Dallas-Plano-Irving, Texas (9,700 jobs, 8 percent) and Baton Rouge, La. (8,000 jobs, 18 percent). The largest percentage gains occurred in Lake Charles, La. (27 percent, 2,900 jobs), Monroe, Mich. (27 percent, 600 jobs), Owensboro, Ky. (25 percent, 700 jobs) and Crestview-Fort Walton Beach-Destin, Fla. (24 percent, 900 jobs). The largest job losses from August 2013 to August 2014 were in Phoenix-MesaGlendale, Ariz. (minus 5,000 jobs, minus 5 percent), followed by Bethesda-RockvilleFrederick, Md. (minus 4,000 jobs, minus 12 percent), Gary, Ind. (minus 2,800 jobs, minus 15 percent) and Edison-New Brunswick, N.J. (minus 2,700 jobs, minus 6 percent). The largest percentage decline for the past year was in Steubenville-Weirton, Ohio-W.V. (minus 17 percent, minus 300 jobs), followed by Gary, Ind. and Redding, Calif. (minus 13 percent, minus 400 jobs). Even as construction spending increased

for the year, it declined 0.8 between July and August, from $968.8 billion to $961 billion. Both private and public construction spending declined for the month, 0.8 percent and 0.9 percent respectively. The month-tomonth private sector declines occurred in both residential (0.1 percent down) and nonresidential construction (1.4 percent down). Spending on public education facilities dropped 2.9 percent for the month while investments in highway construction also dropped by 0.6 percent for the month. Association officials said that the construction employment and spending data make it clear that the industry continues its slow and sometimes inconsistent recovery from its years-long downturn. They cautioned that many firms report having a hard time finding enough qualified workers. Indeed, one in four firms report having to turn down projects because of worker shortages. “We want to make sure firms don’t miss out on the recovery because they don’t have enough workers,” said Stephen E. Sandherr, the association’s chief executive officer. “Ultimately these delays will undermine the recovery by spiking construction costs and delaying project schedules.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

One-Third to Increase Hires ELFA from page 1

tions will remain the same over the next four months, down from 78.8 percent in August. 3 percent believe business conditions will worsen, unchanged from the previous month. • 30.3 percent of survey respondents believe demand for leases and loans to fund capital expenditures (capex) will increase over the next four months, up from 21.2 percent in August. 66.7 percent believe demand will “remain the same” during the same four-month time period, down from 75.8 percent the previous month. 3 percent believe demand will decline, unchanged from August. • 15.2 percent of executives expect more access to capital to fund equipment acquisitions over the next four months, unchanged from August. 84.8 percent of survey respondents indicate they expect the “same” access to capital to fund business, and none expects “less” access to capital, both also unchanged from the previous month. • When asked, 30.3 percent of the executives reported they expect to hire more employees over the next four months, a decrease from 33.3 percent in August. 60.6 percent expect no change in headcount over the next four months, up from 57.6 percent last month. 9.1 percent expect fewer

employees, unchanged from August. • 6.1 percent of the leadership evaluates the current U.S. economy as “excellent,” unchanged from last month. 87.9 percent of the leadership evaluates the current U.S. economy as “fair,” and 6.1 percent rate it as “poor,” both also unchanged from August. • 27.3 percent of the survey respondents believe that U.S. economic conditions will get “better” over the next six months, a decrease from 30.3 percent who believed so in August. 66.7 percent of survey respondents indicate they believe the U.S. economy will “stay the same” over the next six months, unchanged from August. 6.1 percent believe economic conditions in the United States will worsen over the next six months, up from 3 percent who believed so last month. • In September, 15.2 percent of respondents indicate they believe their company will increase spending on business development activities during the next six months, a decrease from 21.2 percent in August. 84.8 percent believe there will be “no change” in business development spending, an increase from 78.8 percent last month. None believe there will be a decrease in spending, unchanged from last month. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 50 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com

ALLIED CONSTRUCTION PRODUCTS ..............................39

HENDRIX MACHINERY LLC ..................................................3

ALLU GROUP ........................................................................11

HYDRAULICIRCUIT TECHNOLOGY ....................................11

ARTIC SNOW & ICE CONTROL ..........................................13

IROCK CRUSHERS ..............................................................32

BARGAINS..............................................................................41

IRONPLANET ........................................................................47

BID SPOTTER ........................................................................48

KAWASAKI CONSTRUCTION MACHINERY........................15

BLACKMON AUCTIONS INC

KOBELCO CONST MACH AMER LLC....................................5

WILBURTON OK / VAN BUREN AR..............................48 CATERPILLAR INC ..........................................................34,35 CEG SCALE MODELS ............................................................6 CLASSIFIEDS ........................................................................41 CONSTRUCTION EQUIPMENT GUIDE CRAWLER LOADER PROMO ......................................24 WANTED ........................................................................42 FL AUCTION PROMO....................................................18 AUCTION RESULTS ......................................................45 DOOSAN INFRACORE AMERICA CORP ............................29 DOOSAN PORTABLE POWER ............................................14 DYNAPAC ..............................................................................22 EQUIFY AUCTIONS LLC

KOMATSU AMERICA CORP ............................................20,21 KPI-JCI ....................................................................................37 LBX ..................................................................................26,27 LIUGONG CONSTRUCTION MACHINERY..........................19 METSO MINERAL SCREENING ..........................................33 METSO MINERALS CRUSHING ..........................................38 MIDCO DEMOLITION TOOL CO ..........................................52 NATIONAL ATTACHMENTS ..................................................10 NORAM..............................................................................16,17 PEMBERTON ........................................................................10 PURPLE WAVE INC ..............................................................44 RANSOME EQUIPMENT SALES LLC ..................................42

WILLS POINT TX ..........................................................49

RITCHIE BROS. AUCTIONEERS..........................................51

FELLING TRAILERS ..............................................................25

ROAD BUILDERS MACHINERY ........................................7,11

FLANGE LOCK ........................................................................2

SCHAEFER ENTERPRISES ................................................10

FLECO ATTACHMENTS ........................................................12

SENNEBOGEN ......................................................................36

FLUID CONTROL SERVICES ................................................8

SUPERIOR INDUSTRIES ......................................................34

GROVE CRANE ....................................................................28

VOLVO ....................................................................................30

HELAC CORPORATION ........................................................12

YOUNG CORPORATION ......................................................13

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 18, 2014 • Page 51

Unreserved public auctions

31,3

items

Heavy construction and trucks

CA ATERPILLAR 330CL HOBBS, NM – OCTT 30

INTERNA NTERNA ATIONALL 470 7 0 TIP PTON, CA A – NOV 19

2 – GROVE RT760E 60 TON HOUSTON, TX – NOV 12–13

CA ATERPILLAR 988G HIGH LIFFTT – LAS VEGAS, NV – NOV 21

2006 GMC C8500 4000 GALLO ON HOBBS, NM – OCTT 30

CA ATERPILLAR D8R – BOISE, ID – NOV 14

2011 CA ATERPILLAR 950H – LAS VEGAS, NV V – NOV 21

2008 CA ATERPILLAR 980H PHOENIX, AZ – NOV 18

JOHN DEERE 772CH A AWD WD – BOISE, ID – NOV 14

2007 CA ATERPILLAR 988H PHOENIX, AZ – NOV 18

2011 & 2 – 2010 CA ATERPILLAR D8T HOUSTON, TX – NOV 12–13

FFeatured eatured u upcoming pcoming auctions auctions

FFeatured eatured it items ems in Nor North th America America

Bid w with ith cconfidence onfidence

Ho Hobbs, bbs, NM C Champaign, hampaign, IL Hou Houston, ston, TX Boi Boise, se, ID New Br Braunfels, aunfels, TX Phoeni Phoenix, x, AZ Tipt Tipton, on, CA Williston, W illiston, ND Las La s Vegas, Veg gas, NV

525+ excavators excavators 295+ crawler crawler tractors tractors 305+ wheel loaders loaders 130+ mot motor or graders graders 225+ lo loader ader backhoes backhoes 250+ sskid kid ssteer teer lo loaders aders 115+ ar articulated ticulated du dump mp ttrucks rucks 125+ cra cranes nes 65+ mini e excavators xcavators and much much more... more...

▸ No minimu minimum mb bids ids or rreserve eservve prices prices ▸ Up tto o 100% fin financing ancing available available ▸ Ins Inspect pect and b bid id in per person son or on online line

Oct October ober 30 No November vember 11 No November vember 12–13 12–13 November November 14 14 November November 14 14 November November 18 November November 19 19 No November vember 20 November November 21 21

rbauction.com rb auction.com | 1.800.2 1.800.211.3983 11.3983 Auction Auction Firm License # 444.000193, Auctioneer Auctioneer Gr Greg eg M. Highsmit Highsmithh # 441.000865, Au Auctioneer ctioneer James L. Valentine Valentine # 15239, Au Auctioneer ctioneer Gr Greg eg M. Highsmit Highsmithh # 13285, Au Auction ction CCompany ompany Bond #0470724, Auctioneer Auctioneer John KKorrey orrey Bond # 0470729, 0470729, Auctioneer Auctioneer Patrick Patrick J. Hic Hicks ks Bond # 0470727, RRitchie itchie BBros. ros. Auctioneers Auctioneers (America) (America) Inc Inc.. Au Auction ction CClerk lerk License #225 *O *OAC. AC. TTerms erms and cconditions onditions ap apply. plyy.

Selll y Sel your our equipment Call C all today–any today–any nu number mber of items items accepted. accepted.

More it More items ems added d daily aily Visitt rb Visi rbauction.com auction.com tto o see al alll auctions and u up-to-date p-to-date li listings. stings.

Page 52 • October 18, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE