West 22 2014 by Construction Equipment Guide

$3.00

Published Nationally ®

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Western Edition

www.constructionequipmentguide.com

November 1, 2014 • Vol. IX • No. 22 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

Inside

Crews Put West Bozeman Bridge on Fast Track

Power Motive Celebrates Cheyenne Opening... 8

Cat 824K Dozer Build Solid Performance...42

The geotechnical and structural analyses included a peak ground acceleration for a design event with a 7 percent probability of excellence in 75 years at this location with its Class C soil.

By Dorinda Anderson CEG CORRESPONDENT

Being able to complete a nearly $8 million, 18-month project in only eight months was no easy feat, but was made possible because of an accelerated labor plan. The 48-year-old dual-bridge replacement

Bidders Flock to WAC for Liquidation Sale...60

Table of Contents ................4 Paving Section ..............25-33 Crawler Loaders, Dozers, Undercarriages & Parts Section ..........................37-45 Business Calendar ............62 Auction Section ............58-68 Advertisers Index ..............66

near Bozeman, Mont., was originally scheduled to be completed in two phases. Phase 1 was set to take place from March through October or November of 2013 and Phase 2 was scheduled to take place from March of 2014 until late July 2014. “We were able to accelerate the project see BRIDGE page 46

A wide array of excavators with 330 and 355 demo hammers and numerous forklifts and graders were used to excavate 25,821 cu. yd. (19,741 cu m) of excavation backfill.

Industry Employers Add Clock Ticks Toward 16,000 Jobs in Sept. Yet Another Highway Construction employers added 16,000 jobs and the sector’s unemployment rate fell to 7 percent, the lowest rate for September in years, according to an analysis released Oct. 3 by the Associated General Contractors of America. Association officials said the construction employment gains come as more firms report having a hard time finding enough qualified workers to fill available positions, citing the lack of local vocational training programs, especially at the secondary level. “While we are eager to see even more construction employment gains, there is no denying the fact that the industry has been in recovery mode for much of the past three years,” said Stephen E. Sandherr, the association’s chief executive officer. “But the industry won’t be able to keep filling positions if there aren’t enough qualified workers available to fill them.” see JOBS page 55

Trust Fund Crisis With Oct. 1 marking the beginning of fiscal year 2015, the 31-member organization Transportation Construction Coalition (TCC) urged Congress to find a way to pay for, and pass, a new long-term surface transportation measure as soon as possible. They cautioned that failure to act would lead to another self-imposed funding crisis that would undermine vital road, highway and transit repairs. “We worked hard to build broad consensus within a deeply-divided Congress for investing in the nation’s aging roads, bridges and transit systems,” said Stephen E. Sandherr, the chief executive officer of the Associated General Contractors of America and the Coalition’s co-chair. “Members of Congress can either take advantage of that momentum or see FUND page 55

Page 2 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

For All Your Equipment Needs! Authorized Dealer For In all areas of construction, our products offer the flexibility and performance you need to take your business to the next level. Easily handle any type of job with Kirby-Smith Machinery.

Finance & Lease Rates Starting as Low as .0 APR!

PAVING • COMPACTION • AIR COMPRESSORS • PUMPS SOIL STABILIZERS • CRUSHING • COMPACT MILLING MACHINES EXCAVATORS • DOZERS • CRANES • BOOM TRUCKS Abilene

Amarillo

Lubbock

Odessa

877.577.5729 800.283.1247

www.BCESPower.com

SALES • PARTS • SERVICE

866.289.6087 877.794.1800

Dallas

Ft. Worth

800.753.1247

877.851.9977

Oklahoma City

St. Louis

800.375.3339

www.kirby-smith.com 888.861.0219

866.279.1392

Kansas City 877.851.5729

Tulsa

800.375.3733

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 3

"In Business for over 32 Years" www.hendrixmachineryllc.com 2006 Ingersoll-Rand SD100F, Stk#: 9462, 84" Pad Drum, 599 hrs., 4 Cyl. Cummins Eng., 10' 5" Height ..............................................$59,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla 2009 Cat D5K LGP, Stk#: 9475, EROPS, A/C, 6 Español Way Blade, 6,291 hrs., 26" Pads, 10' 4" Wide...... ............................................................$72,500

2011 Cat 416E ST, Stk#: 9477, EROPS, A/C, 2002 JLG G9-43A, Stk#: 8879, 9,000 lbs., 43 ft., 4WD, 494 hrs., Aux. Hyd., 24" Bucket, 2 Stick 2008 Cat D6T LGP, Stk#: 9489, EROPS, A/C, St/Tilt Blade, 9,247 hrs., 36" Pads, 13' 2" Wide .. Controls, 12.5x80-18 Front Tires, 19.5Lx24 Rear 5,262 hrs., 4WD, 60" Forks, 74" Frame, 13.00x24 ..........................................................$129,500 Tires ....................................................$69,500 Foam Filled Tires, 4 Cyl. JD Eng ..........$34,500

1996 Komatsu PC150-5, Stk#: 9538, EROPS, 8,502 hrs., 43" Bucket, 28" Pads, 8' 10" Wide...... ............................................................$24,500

2007 Ingersoll-Rand SD45D TF, Stk#: 9516, 54" Smooth Drum, 472 hrs., 12.4x24 Tires, 4 Cyl. Cummins Eng ......................................$29,500

2012 John Deere 323D, Stk#: 9495, OROPS, 815 hrs., 74" Bucket, Aux. Hyd., 13" Rubber Tracks, JD Eng. ....................................$29,500

2011 JLG 10042, Stk#: 9548, 10,000 lbs., 42 ft. 3,023 hrs., 4WD, 4WS, Aux. Hyd., 48" Forks, 74" 2013 Cat 924K, Stk#: 9473, EROPS, A/C, FM Frame, 17.5x25L-2 Tires, 4 Cyl. Cummins Eng. .. Stereo, 241 hrs., 8' 4" Bucket, 20.5x25 Tires, 6 ............................................................$79,500 Cyl. Cat Eng., 11' 4" Height ................$145,500

2006 Ingersoll-Rand RT706J, Stk#: 9468, 6,000 2007 Ditch Witch RT40, Stk#: 9435, OROPS, 2012 John Deere 210G LC, Stk#: 9418, EROPS, lbs., 15 ft., 2,951 hrs., 2WD, 48" Forks, 60" 4WD, 1,227 hrs., 64" Push Blade, Side Shift Frame, 11Lx16 Rear Tires, 16.9x24 Front Tires, A/C, FM Stereo, 2,879 hrs., 42" Bucket, 32" Pads, Boom, 6" Trench, 3 Cyl. Deutz Diesel Eng$14,500 4 Cyl. JD Eng........................................$21,500 10' 6" Wide ............................................$132,500

2006 John Deere 9520, Stk#: 9343, EROPS, A/C, FM Stereo, 7,177 hrs., 76x50.00B32 or 1250/45B32 Tires, JD Eng., 12' Wide, 11' 7" Height, Bucket, 6 Cyl., 11' 4" Height ..$125,000

2006 John Deere 700J LGP, Stk#: HR-364, EROPS, A/C, Sweeps, Rear & Side Screens, 6 Way Blade, 6,062 hrs., 30" Pads, 11 ft. Wide $65,000

2007 JLG 800AJ, Stk#: 9541, 500 lbs., 80 ft., 2,765 hrs., 4WD, 445/55D19.5 Tires, 4 Cyl. Deutz Eng. ............................................$79,500

2011 John Deere 650J LT, Stk#: HR-88, OROPS, Forestry Package, 6 Way Blade, 80% U/C, 2,453 hrs., Ripper Valve, 18" Pads, Height 9' 5", Width 8' 9', Width Track to Track 6' 7" ...... ............................................................$79,500

2007 Ditch Witch RT55, Stk#: 9578, w/H540 Rock Saw, 1,130 hrs., 31x15.50x15 Tires, 72" Push Blade, Deutz Diesel Eng. ............$22,500

2011 Cat D3K LGP, Stk#: 9408, EROPS, A/C, 6 2005 Dynapac CA121D, Stk#: 9501, 54" 2007 Cat D6T LGP, Stk#: 9527, EROPS, A/C, Smooth Drum, (old mtr. 1,353 hrs.) New Meter: Way Blade, 395 hrs., 25" Pads, 10' 4' Wide ........ Rear & Side Screens, St/Tilt, Blade, 9,382 hrs., 46 hrs., 13.50x16.1 Tires, 3 Cyl. JD Eng$22,500 ............................................................$86,500 36" Pads, 13 ft. Wide..........................$129,500

2006 John Deere 1050C, Stk#: 9503, EROPS, A/C, 14 ft. S/U Tilt Blade, 29" Pads, 12 ft. Height ..........................................................$109,500

2006 Cat D6R III XL, Stk#: 9113, EROPS, A/C, Sweeps, Rear Screen, Angle Blade, 6,078 hrs., 80% U/C, 24" Pads, 10' 8" Wide ........$129,500

2005 Gradall G6-42P, Stk#: 9149, 6,000 lbs., 42 ft., 4WD, 4WS, 3,664 hrs., Hyd. Self Leveling 2007 John Deere 450J LGP, Stk#: 9340, System, 48" Forks, 50" Tilt Frame, 13.00x24 OROPS, 6 Way Blade, 5,631 hrs., 24" Pads, 9' Foam Filled Tires, 4 Cyl. JD Eng ..........$29,500 7" Wide ................................................$39,500

1976 Cat 631C, Stk#: 9530, EROPS, A/C, 33.25x35 Tires, 48 ft. Long, 12'8" Wide, 13 ft. Height ..................................................$26,500

2008 Lull 1044C-54, Stk#: 9453, 9,000 lbs., 42 ft., 6,946 hrs., 4WD, 4WS, 48" Forks, 51" Tilt 2001 Cat 160H, Stk#: 9485, EROPS, A/C, FM Frame, 14.00x24TG Foam Filled Tires, Hyd. Self Stereo, 6,070 hrs., 17.5x25L-2 Tires, 14 ft.M/B, Leveling System, 4 Cyl. JD Eng. ..........$46,500 9 ft. Wide............................................$109,500

1997 Cat D8R, Stk#: 9502, EROPS, 16 ft. Angle Blade, 9,853 hrs., Ripper no Shanks, No Eng. Encl., 22" Pads, 11' 6" Wide ..............$109,500

2012 Bobcat T650, Stk#: 9562, EROPS, A/C, FM 2013 Case SV185, Stk#: 9525, OROPS, 4 hrs., Stereo, 2,896 hrs., 78" Bucket w/Teeth, 18" 64" Bucket, Aux. Hyd., Hyd. Quick Coupler, 4 Cyl. Rubber Tracks, Aux. Hyd., 4 Cyl. Kubota Eng. .... CNH Eng ..............................................$38,500 ............................................................$39,500

2009 Volvo G930, Stk: #9246, EROPS, A/C, FM Stereo, 5,505 hrs., 14 ft. Blade, Rear Ripper, 14.00x24 Tires, 10' 9" Height, 8 ft. Wide, 6 Cyl. Volvo Eng ............................................$119,500

2007 JLG 3394RT, Stk#: 9441, 2,250 lbs., 33 ft., 4WD, 1,693 hrs., 82 hp, 7' Wx12' 10" L Platform, 33x15.50x16.5 Tires, Gas Eng$16,500

1996 Komatsu PC150-5, Stk#: 9538, EROPS, 2007 Multiquip, Stk#: 8596, 85-89 KVA, 4,919 8,499 hrs., 43" Bucket, 28" Pads, 8' 10" Wide...... hrs., St225x75Dx15 Tires, 4 Cyl. JD Eng$24,500 ............................................................$24,500

2006 Skytrak 6042, Stk#: 9266, 6,000 lbs., 42 Ft., 2,320 hrs., 4WD, 4WS, 48" Forks, 48" Frame, 2008 Club Car XRT 1550, Stk#: 9537, 4WD, Aux. Hyd., 13.00x24 Foam Filled Tires, Hyd. Self 1,283 hrs., 25x11.00x12 Tires, 2 Cyl. Gas Eng .... Leveling System, 4 Cyl. Cummins Eng...$34,500 ............................................................ $75,000

Page 4 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WESTERN EDITION

IN THIS ISSUE

To read these stories and many more, visit www.constructionequipmentguide.com

SPECIAL SECTION 37 CRAWLER LOADERS, DOZERS, UNDERCARRIAGES & PARTS Be sure to check out this special section! Keep up to date with the latest information on crawler loaders, dozers, undercarriages and parts.

18 HAWTHORNE CAT HIRES FARMER AS ASSISTANT SALES MANAGER Hawthorne Cat, the exclusive Cat dealer in San Diego and the Pacific Region, has expanded the San Diego machine sales team with the addition of Ross Farmer as assistant sales manager.

50 DOOSAN EXPANDS WITH NEW DEALER IN

FEATURES 8

NEW POWER MOTIVE CHEYENNE BRANCH KICKS

OFF OPENING Power Motive Corporation recently celebrated its new location with an open house on Sept. 19 with more than 180 attendees. The event created much buzz in the community.

WACKER NEUSON HONORS TOP DEALERS AT

ANNUAL MEETING Wacker Neuson held its third annual fall dealer summit, Oct. 2 to 3. The light and compact equipment manufacturer invited its contracted dealers to the Milwaukee area to discuss new opportunities for 2015 and to honor those dealers that have done an outstanding job at representing the brand.

10 MORGANTI GROUP STRENGTHENS PRESENCE IN TEXAS MARKET, HIRES JOSEPH KUMMER With a 21-year career and vast knowledge and experience in the construction sector, Kummer has worked in construction management, focusing in the healthcare/research, higher education, government and public works marketplaces.

12 BALFOUR BEATTY GOES PAPERLESS ON $800M DFW AIRPORT When Dallas Fort Worth International Airport needed to renovate its four older terminals, it sought out Balfour Beatty to manage and execute the project. Balfour Beatty was brought on board as the construction manager for the six- to seven-year project to renovate two of the terminals, dividing the project into six phases.

14 KUBOTA TRACTOR CORPORATION TO SPONSOR ALAN JACKSON’S UPCOMING 2015 TOUR Kubota Tractor Corporation is joining Alan Jackson’s 25-year career celebration. The industry-leading tractor and equipment company has signed on as a sponsor of the country superstar’s upcoming 2015 tour.

GEORGETOWN, TEXAS Doosan has expanded its dealer network with the addition of Venture Drilling Supply as an authorized sales, parts, service and rental provider of Doosan equipment. The dealership is located at 1150 County Road 155, Georgetown, Texas.

Circulated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

Founder, Publisher & CEO Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Christine Reckner Pete Sigmund John Pinkerton Tom Weinmann Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site www.constructionequipmentguide.com Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com For advertising rates: Contact Kent Hogeboom National Sales Manager 315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com Contact Dale Agnew

• Colorado • Louisiana • Oklahoma • Texas

55 HOLT CAT NAMES NEW SENIOR DIRECTOR OF

Toll Free 877/877-4997 Fax 972/695-6049 e-mail dagnew@cegltd.com

PUBLIC AFFAIRS

Contact Dennis Hogeboom

Jim Campbell has been involved in governmental affairs and strategic communications for more than 25 years. In his new role, he will support the company in fostering long-term and strategic relations with Holt’s constituencies to positively impact and advance the company’s vision and core values.

• Arizona • California • Hawaii • Nevada • New Mexico • Utah

602/679-8759 e-mail dennishogeboom@cegltd.com Contact Patrick Kiel

60 WCA HOSTS LIQUIDATION SALE AT PERRIS, CALIF., FACILITY On Oct. 16, Western Construction Auctioneers held a complete liquidation auction at its Perris, Calif., facility, which is located at 2021 Goetz Rd, Perris, CA 92570.

EQUIPMENT 28 WIRTGEN W 250i Large Cold Milling Machine 30 BOMAG BMP8500 Articulated Multi-Purpose Compactor 32 ROADTEC RX-100E Mill

DEPARTMENTS 56 CLASSIFIEDS 58 COMING AUCTIONS 62 BUSINESS CALENDAR

• Idaho • Montana • Oregon • Washington • Wyoming

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com

Mobile

Facebook

Twitter

YouTube

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/5232200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ November 1, 2014 â&#x20AC;˘ Page 5

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

2004 Caterpillar 321C LCR: #92063, Cab/AC, QC, Aux Hyd, 9,100 hrs ....................................$64,500

2002 Caterpillar 325CL: #92079, Cab/AC, 31.5â&#x20AC;? Tracks, 10â&#x20AC;&#x2122; 6â&#x20AC;? Arm, QC, 12,100 hrs ........$69,500

2004 Deere 120C: #92046, Cab/AC, 27.5â&#x20AC;? Tracks, Mech Thumb, 4,200 hrs ..............$53,500

2001 Komatsu PC220LC-6LF: #80381, Cab/AC, 60â&#x20AC;&#x2122; Long Front, 5,700 hrs ......................$139,500

1983 Dresser TD20E: #92025, Cab, 24â&#x20AC;? Tracks, Drawbar, Sweeps ......................................$34,500

1998 Caterpillar D6M XL: #81916, Cab/AC, 24â&#x20AC;? Tracks, Winch, 13,500 hrs........................$99,500

2008 Komatsu D51EX-22: #82113, Cab/AC, PAT Blade, Sweeps, KOMTRAX, 2,650 hrs ..$112,500

2004 Komatsu D65EX-15: #80803, Cab/AC, 20â&#x20AC;? Tracks, Drawbar, 3,550 hrs ....................$117,500

2002 Komatsu WA250-3: #92018, Cab/AC, JRB QC, 8,200 hrs............................................$47,500

2007 Komatsu WA250-5: #82117, Cab/AC, JRB QC, 3rd Valve, 4,500 hrs ..........................$93,500

2006 Komatsu WA450-5: #81696, Cab/AC, GP Bucket, High Lift, 8,100 hrs....................$134,500

2006 Komatsu WA80-5: #81981, Cab/AC, QC/Bucket, 1,700 hrs................................$59,500

Page 6 â&#x20AC;¢ November 1, 2014 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

WHATEVER IT TAKES TO GET THE JOB DONE RIGHT MAGNETS â&#x20AC;¢ GRAPPLES â&#x20AC;¢ SCRAP SHEARS â&#x20AC;¢ CLAMSHELL BUCKETS CONCRETE DEMOLITION â&#x20AC;¢ ROCK + LOG GRABS â&#x20AC;¢ DYNASET ACCESSORIES Magnets

Concrete Demolition

Grapples

Bucket Crusher for Rock & Concrete Clamshell Buckets

Dynaset Hydraulic Accessories

Products for the Rail Industry

Scrap Shears

GENSCO AMERICA, INC. ACROSS USA 800-268-6797 â&#x20AC;¢ 5307 Dividend Dr., Decatur, Georgia 30035 â&#x20AC;¢ 770-808-8711 â&#x20AC;¢ Fax: 770-808-8739

GENSCO EQUIPMENT (1990) Inc. 53 Carlaw Ave., Toronto, Canada M4M 2R6 â&#x20AC;¢ 416-465-7521 â&#x20AC;¢ Fax: 416-465-4489 â&#x20AC;¢ email: info@genscoequip.com â&#x20AC;¢ www.genscoequip.com

& /% 3& 465 4

* 5 4 8)"5 ."55&34 "5 5)& &/% 0' 5)& %":

#"/$)"3% 64& % & 26* 1.& /5

#M BODIBS E.BDIJ OFS Z DPN 6T FE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 7

Page 8 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

New Power Motive Cheyenne Branch Kicks Off Opening Power Motive Corporation recently celebrated its new location with an open house on Sept. 19 with more than 180 attendees. The event created much buzz in the community. Guests were treated to a barbecue, comprehensive information about the company’s equipment and services, a raffle giving away many great prizes and

also were given a gift bag to take home. This marks the sixth location for Power Motive, but the first site outside the state of Colorado. Power Motive is excited to improve its presence in Wyoming with the opening of this branch and offer a greater experience to both existing and future customers,

Power Motive Corporation’s new Cheyenne branch.

(L-R): PMC’s Rental Manager David Kellerstrass and Vice President Mac Blount pose with the Grand Prize Winner Steve DePoorter of Knife River.

according to Charles Barker, parts manager of Power Motive’s Cheyenne location. “We are excited about the opening of our Cheyenne branch which will allow us to provide convenient and timely service to our customer base in the southeastern portion of Wyoming. We will not only be able to provide parts and service for our Komatsu line, but we will also have the ability to service all makes and models through our aftermarket vendors” said Barker.

Power Motive Corporation was founded in 1959 as a distributor of small industrial construction equipment. Through the years, the company has expanded its product offerings and industries served which consists of: construction, utility, energy, agricultural, forestry, infrastructure, manufacturing, mining, quarry, recycling, transport, paving and several others. PMC is the Komatsu dealer in Colorado and southeast Wyoming, but also represents many other

prestigious global suppliers including: KPI-JCI, Astec, Takeuchi, Sakai, Sandvik, Morbark, NPK, Fecon and more. The new PMC building is conveniently located off I-80, which will make it easily accessible for all equipment products and services. For more information, visit www.powermotivecorp.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Wacker Neuson Honors Top Dealers at Annual Meeting Wacker Neuson held its third annual fall understand what they dealer summit, Oct. 2 to 3. The light and need to build a sustainable compact equipment manufacturer invited its business and provide the contracted dealers to the Milwaukee area to support they need to be discuss new opportunities for 2015 and to successful.” honor those dealers that have done an outEvery year, Wacker standing job at representing the brand. Neuson acknowledges More than 100 Wacker Neuson contract- dealers who are highly ed dealers from the United States and committed to representCanada represented by over 150 representa- ing the Wacker Neuson tives attended the two day event. Company brand. updates were provided at a local hotel venue, but the highlight of the event was an equipment display and awards ceremony at the Harley-Davidson Museum located in downtown Milwaukee. “Building and maintaining a strong brand is an important element of the Wacker Neuson dealer sumWacker Neuson staged its equipment display at the Harley Davidson Museum in mit,” said Johannes Schulze downtown Milwaukee. Vohren, vice president and managing director, Wacker Recipients of Wacker Neuson Sales Awards for the “With close to 400 models in a variety of sales for 2013 in nine different categories are Neuson Corporation. “It is United States and Canada were presented at the equipment categories and a prestigious the criteria for the 2014 honorees. our goal to be a valued busi- Wacker Neuson Dealer Summit Oct. 2 to 3. Top sales group of dealers in our network, selection of (This story also can be found on ness partner to our dealers awards in a variety of equipment categories were the annual award winners is strictly by the Construction Equipment Guide’s Web site at and make it our priority to determined based on 2013 sales. numbers.” said Schulze Vohren. The top www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 9

Page 10 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Rugged Off-highway Cabin Temperature Control Systems • Add-on & Replacement Climate Control Systems • Custom Cooling/Heating Systems • Self-contained & Split Systems • Cabin Top & Wall Mounted Systems • Engine, AC Electric & Hydraulic Driven Compressors • Cabin Filters & Pressurizers Email: sales@visionaire-inc.com Call Us For Assistance (972) 647-1056

www.visionaire-inc.com

Ensuring Growth and Success...

Morganti Group Strengthens Presence in Texas Market, Hires Joseph Kummer The Morganti Group Inc. has appointed Joseph Kummer as vice president, Texas region, for the Connecticut-based construction group. With a 21-year career and vast knowledge and experience in the construction sector, Kummer has worked in construction management, focusing in the healthcare/research, higher education, government and public works marketplaces. Throughout his career, Kummer successfully developed multiple Construction Management At Risk teams, oversaw projects from preconstruction through closeout, and executed projects as a superintendent, manager and estimator. “We are pleased to welcome Joseph Kummer to the team at Morganti,” said Nabil Takla, president and CEO of Morganti. “As 2015 approaches, he will be instrumental in the implemen-

tation of our organization’s strategic initiatives in Texas to engage in a variety of projects across varied industries. His background brings extensive understanding of pre-construction, construction and the ability to maintain high client satisfaction and develop a winning team.” In his new role, Kummer will oversee Morganti’s operations in the Houston, Austin and San Antonio markets. He will be focused on staff development, project delivery, ensuring client satisfaction and developing new projects in residential, aviation, healthcare, municipal construction, K-12 and higher education.

dation of successful projects and longstanding client partnerships, following 98 years in the industry. Through offices in Texas, Florida and Connecticut — as well as an established international practice in Egypt, Jordan, Qatar, United Arab Emirates, Italy and Greece — Morganti sees clients through the planning, design and construction of complex projects from inception to completion. Morganti’s portfolio spans most major building types, with focuses in aviation, healthcare, education, municipal, corporate commercial, industrial, residential and mixed use. For more information, call 281-4481015 or visit www.morganti.com.

About the Morganti Group Inc. Morganti is a construction management firm working from a solid foun-

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 11

Page 12 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Terminal Renovations...

Balfour Beatty Goes Paperless On $800M DFW Airport For more than 100 years, Balfour Beatty has created and cared for the vital assets that enable societies and economies to grow. With operations in more than 80 countries, Balfour’s global staff is comprised of designers, planners, engineers, builders, project and facilities managers, analysts and consultants. Through more than 50,000 employees worldwide, Balfour Beatty is one of only a few companies with the expertise and resources to deliver complex and large-scale projects, handling all stages of the infrastructure lifecycle — from financing, through planning and design, to construction, maintenance and support, according to the company. Given this wealth of experience and capability, it is no surprise that when Dallas Fort Worth International Airport needed to renovate its four older terminals, it sought out Balfour Beatty to manage and execute the project. Balfour Beatty was brought on board as the construction manager for the six- to seven-year project to renovate two of the terminals, dividing the project into six phases. Opportunity: Mobile Access to Large Drawing Sets Balfour Beatty employees needed constant access to up-to-date drawing sets, from any location onsite. While a set of drawings for a project typically consists of less than 3,000 sheets, the large-scale nature of this project was projected to require 20 times the normal size, or about 60,000 sheets for all six phases of the project. Given that employees needed access to the current drawings, new and updated drawings would have to be printed and delivered to employees on site with each new modification or update. Jeff Pistor, project manager of Balfour Beatty, noted that the five sets of early stage drawings for phase one of the projects alone had cost almost $60,000. Realizing that full size sets of drawings would be

“Over the life of the project we would have printed drawing sets weighing 9,000 lbs. and stacked 20 feet high if we had not established the cloud based paperless document management system.” Ben Bringardner Balfour Beatty

needed for the jobsite office and in the construction area, over the life of the project, the cost of drawings for Balfour Beatty alone could easily have exceeded $500,000 per terminal. Concern over Internet access to the drawing sets was a key issue, particularly for project superintendents. Historically, superintendents go to a plan room located in the job site office to look at drawings. In the airport’s case, the actual job site was 1.5 miles away, and with the time to get in and out of secure areas at the airport, traveling back and forth from the job site to the office trailer would take at least 20 minutes each way. That time (and money) was saved by the adoption of iPads to access project drawings. Other challenges surrounded the control and access of documents for all of the stakeholders. With the drawings continuing to be refined, distribution of the most up-to-date version of the drawing set was critical. The potential for subcontractors to be using outdated plans, leading to confusion and potential re-work, was immense. Challenge: Provide Secure Online and Offline Access to Workers The solution was to eliminate the paper and to provide the team with real time access to electronic drawing sets. The existing Internet connection in the jobsite office was not robust, especially with 70 workers trying to access the cloud.

In addition, speed limitations and coverage concerns existed within the construction space itself. Project team members needed a solution that provided online and offline access to workers at all times, with efficient use of available network bandwidth. With so many different contractors working on a project of this scale and with unique security requirements, a solution with granular permissions was key. Balfour Beatty needed separate folders and permissions for contractors accessing the drawings on this project. An airport employee recommended Egnyte as a solution. Solution: Hybrid Cloud File Server with iPad Access Hosting the drawings on the cloud worked well but it soon became clear that the number of drawings being accessed from the Egnyte cloud file server was eating up bandwidth and becoming an issue as the jobsite staff increased. To solve the problem, they chose to deploy Egnyte’s Enterprise Local Cloud on a VMware based virtual server on an existing file server. “Egnyte’s Enterprise Local Cloud [ELC] allowed us to reduce the amount of bandwidth used to access the cloud. The ELC was set up to sync with Egnyte on the cloud every 15 minutes. Instead of everyone going out to the cloud to retrieve drawings, they were simply mapped to the ELC,” said Pistor. “This provided quick access to the large drawing sets for our

staff.” When out in the construction areas, employees carry iPads with them for accessing the drawing sets. Egnyte, integrated with the GoodReader app on the iPad, enables employees to download the drawing sets and cache the drawings for local access. Instead of having to haul around 60,000sheet drawing sets or walk to a jobsite office to access them (away from the issue they are trying to address), employees now simply stash the iPad in their bag when heading to the job site. “For this project, we developed a ‘recycle less’ mantra and have saved several hundred full-size recycle bin’s worth of material by never printing the drawing sets in the first place,” said Ben Bringardner, assistant manager, integrated projects of Balfour Beatty. “Over the life of the project we would have printed drawing sets weighing 9,000 lbs. and stacked 20 feet high if we had not established the cloud based paperless document management system.” Field superintendents also love the paperless solution, as it allows them to address many issues from wherever they are. Many have cited how hard it is to imagine life before electronic documents and drawings and iPads. As one superintendent recently said, “You’ll have to pry it from my cold dead hands. I don’t how know how anything’s gotten built in the past 20 years.”

DFW recently entered into a sustainability partnership with the Environmental Protection Agency, and is thrilled that Balfour Beatty was able to come up with a sustainable solution in the reconstruction of the two terminals. DFW projects that the design team is saving them $5.1 million (71 percent) in costs by using Egnyte. “By selecting Egnyte for this project, Balfour enabled us to take an innovative approach that supports sustainability,” said Julie Ludeman, TRIP communications director. “We are thrilled they chose a hybrid cloud solution that has the redundancy, security and flexibility necessary for a program of this size.” “Egnyte provides our partners with BARC the flexibility they need and the security we require,” said Perfecto Solis, vice president of airport development and engineering at DFW. “As part of our sustainability initiatives we continue to look for ways within our organization to go paperless and hope to use products like Egnyte for future projects.” Take the Next Step More than1 billion files are shared daily by businesses using Egnyte. Egnyte provides the speed and security of local storage with the accessibility of the cloud. Users can easily store, share, access and backup files, while IT has the centralized administration and control to enforce business policies. Egnyte, founded in 2007, is based in Mountain View, Calif., and is a privately held company backed by venture capital firms Google Ventures, Kleiner Perkins Caufield & Byers, Floodgate Fund and Polaris Venture Partners. For more information, call 877/734-6983 or visit www.egnyte.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 13

TOLL FREE

855-575-LUGS(5847)

or 913-947-3934

www www.bairproducts.com .bairproducts.com Email: info@bairpr info@bairproducts.com oducts.com S SUPER UPER 22-BOLT -BOLT - ON ON WHEEL WHEEL KIT KIT

CAT / ASV / TEREX PA PARTS Go Go Got ot Lug LLu Lugs? ug gss??

Factorry

Bai ’ Axle

Bolt-On Replacement Track Drive Lugs • Bolt-On Wheel Replaces Older Hub Style Wheels • 100% Larger Axle Shaft • Greaseable/ Preload Adjustable • CAT 247/257, ASV/TEREX 30/50/60 Models

RE REPLACEMENT PLACEMENT DRIVE DRIVE CARRIER CARRIER PARTS PARTS

AVAILABLE SEPTEMBER 2014 • 25% Thicker Steel Backing Plate Plates es & Sprocket Base • Greaseable Carrier Unit

H HYDRAULIC YDRAULIC TRACK TRACK INSTALLATION INSTALLATION KIT KIT

A ALLOY LLOY C CENTER E N T ER B BOGIE OGIE WHEELS WHEELS

AVAILABLE A VAILABLE SEPTEMBER SEPTEMBER R 2014 2014

• Install rubber tracks fast with Hydraulic Tools • Fits most CAT/ASV/TEREX Compact Loaders

CAT AT 247/257/ 247/257/267/277/287 ASV / Terex 50/60/85/100

• Bair Part #BW9F Flange Wheel • CAT 277 / 287 D SERIES • TEREX / ASV SR G/110 & PT 75/80/100G/110 MACHINES

HEAVY EQUIPMENT RENTALS Serving the Construction and Mining Industries Santa Ana, CA – HQ (714) 554-4851

Since 1962 Fort McMurray ´ 15 LOCATIONS IN NORTH AMERICA

´ Edmonton

´ Williston ´Boise Sacramento ´ Salt Lake City ´ ´Stockton Visalia´ Las Vegas ´ Riverside ´´´ ´ Bullhead City Santa Ana San´Diego ´ Phoenix HEADQUARTERS Coachella

Riverside, CA (951) 276-9025

Bullhead City, AZ (928) 715-0672

Coachella, CA (760) 578-1043

Las Vegas, NV (702) 877-4302

Visalia, CA (559) 651-0116

Salt Lake City, UT (801) 796-7368

Stockton, CA (510) 516-5567

Boise, ID (208) 459-3800

Sacramento, CA (916) 997-7492

Edmonton, Alberta (780) 490-6965

San Diego, CA (619) 205-2026

Ft. McMurray, Alberta (780) 598-0132

Phoenix, AZ (602) 276-2040

Williston, ND (701) 572-8126

3 IER T / R 4 UNITS TIE L NTA RE

When a backhoe’s not big enough!

Page 14 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

TWC Construction Appoints Kerry Cartmill Senior Project Manager TWC Construction Inc. announced that Kerry Cartmill has joined the company as senior manager responsible for project management and client development. Cartmill brings with him 30 years construction industry experience, 22 of those in senior executive positions. “We are very pleased to announce the addition of Kerry to the TWC team,” said Matthew Ryba, CEO, TWC Construction Inc. “Kerry’s vast experience will be invaluable as we ramp up to begin construction on some of the largest projects southern Nevada has seen in nearly a decade. He will oversee all aspects of the construction process as well new Kerry Cartmill business development.” 2000s he was in Las Vegas and was a Prior to joining TWC Construction, partner for OB Construction as well as Cartmill most recently served as vice CEO of Cartmill Rogers Construction. president of operations and marketing “I am very proud to be a part of the of Centennial, Colo.-based Principia TWC team and looking forward to the Construction. Through the 90s and challenges ahead,” said Cartmill.

“TWC is one of very few firms in the region with the experience necessary to build projects the scale of the half million square foot structure that broke ground in North Las Vegas [recently] — it is very exciting to be a part of this team.” TWC Construction Inc. is a general contracting firm specializing in commercial and industrial construction licensed in Nevada, Arizona, California and Utah. The company, which was founded in 1997, has consistently been one of the leading construction firms in southern Nevada as well as one of the first to be LEED certified in the region. It also has constructed some of the largest privately owned solar structures in the state of Nevada. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Kubota Tractor Corporation to Sponsor Alan Jackson’s Upcoming 2015 Tour Kubota Tractor Corporation is joining Alan Jackson’s 25- and a Kubota tractor owner, himself, we believe he is an year career celebration. The industry-leading tractor and excellent fit for our brand.” Tour dates, cities and venues for the memorable 25-city equipment company has signed on as a sponsor of the country superstar’s upcoming 2015 tour. The multi-platinum sell- tour will be announced soon. Jackson’s 2015 tour is an ing Grammy winner, fresh extension of the already off playing the first of his year-long 25th anniversary two sold-out Artist-Incelebration, which kicked Residence shows at the off this summer with the Country Music Hall of Fame opening of his exhibit at the and Museum’s CMA Country Music Hall of Fame Theater, recently made two and Museum, Alan Jackson: special appearances to per25 Years of Keepin’ It form at Kubota’s dealer Country, which will run meeting in Nashville, Tenn., through March 2015. This when the company revealed month the multi-platinum the landmark news for the selling Grammy winner also first time to its dealers who is playing two record-breakwere in attendance from all ing sold out shows at the over the United States and Country Music Hall of Canada. This is the first Fame’s CMA Theater makmajor sponsorship of a Tractor Corporation is joining Alan Jackson’s ing him the first simultanemusic superstar for Kubota Kubota 25-year career celebration. ous artist-in-residence and Tractor Corporation. “We are very excited to partner with Alan Jackson for his major museum exhibit subject. 25th Anniversary Tour,” said Buck Trawick, Kubota mar(This story also can be found on Construction Equipment keting director. “As a highly successful country superstar, Guide’s Web site at www.constructionequipmentguide.com.)

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN. Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:

• Lower your cost of ownership M • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.

WEST KOMATSU DISTRIBUTORS

Bacon-Universal Company, Inc. www.baconuniversal.com HI Hilo 808-935-8595 • 800-352-3508 Honolulu 808-839-7202 • 800-352-3508 Kailua-Kona 808-326-1212 • 800-352-3508 Kauai (Lihue) 808-245-8472 • 800-352-3508 Wailuku Maui 808-244-9158 • 800-352-3508

8 I

Clairemont Equipment Co. www.clairemontequipment.com CA Escondido 760-739-9100 Fontana 909-429-9100 Imperial 760-355-7700 Indio 760-863-5558 San Diego 858-278-8351

B 8

Craig Taylor Equipment Company 8 F

Kirby-Smith Machinery Inc. www.kirby-smith.com OK Oklahoma City 405-495-7820 • 800-375-3339 Tulsa 918-438-1700 • 800-375-3733 TX Abilene 325-692-6334 • 877-577-5729 Amarillo 806-373-2826 • 800-283-1247 Dallas 214-371-7777 • 800-753-1247 Ft. Worth 817-378-0600 • 877-851-9977 Lubbock 806-745-2112 • 866-289-6087 Odessa 432-333-7000 • 877-794-1800

Power Motive Corporation www.powermotivecorp.com CO Colorado Springs 719-576-5541 Denver 303-355-5900 Durango 970-259-0455 • 970-259-0456 Grand Junction 970-241-1550 Milliken 970-587-1188 WY Cheyenne 307-634-5149

www.craigtaylorequipment.com AK Anchorage 907-276-5050 • 800-279-5051 Fairbanks 907-452-1192 • 800-452-1192 Soldotna 907-262-5977 • 800-254-5977 Wasilla 907-376-3838 • 800-973-2607

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ November 1, 2014 â&#x20AC;¢ Page 15

Komatsu Equipment Co. www.komatsueq.com NV Elko 775-753-7557 North Las Vegas 702-399-1004 Sparks/Reno 775-356-1334 UT Hurricane/St. George 435-986-1000 Pleasant Valley 435-216-7777 Salt Lake City 801-972-3660 â&#x20AC;¢ 1-877-Komatsu South Jordan 801-972-3660 WY Casper 307-682-1445 Gillette 307-682-1445 Rock Springs 307-686-1300

LOADERS From Komatsu - The Loader Experts

Modern Machinery, Inc. www.modernmachinery.com ID Boise 208-336-8570 â&#x20AC;¢ 800-221-5211 Pocatello 208-233-5345 â&#x20AC;¢ 800-829-4450 MT Billings 406-252-2158 â&#x20AC;¢ 800-735-2589 Kalispell 406-755-5540 â&#x20AC;¢ 800-434-4190 Missoula 406-523-1100 â&#x20AC;¢ 800-332-1617 OR Eugene 541-688-7321 â&#x20AC;¢ 800-826-9811 Portland 971-222-1710 â&#x20AC;¢ 800-950-7779 WA Kent 253-872-3500 â&#x20AC;¢ 800-669-2425 Rochester 360-273-4284 â&#x20AC;¢ 800-304-4421 Spokane 509-353-1654 â&#x20AC;¢ 800-541-0754

Road Machinery, LLC www.roadmachinery.com AZ Gilbert 480-545-2400 Phoenix 602-252-7121 Prescott 928-778.5621 Tucson 520-623-8681 â&#x20AC;¢ 800-989-8681 CA Bakersfield 661-695-4830 Fremont 510-659-1903 Fresno 916-350-0640 Perris 909-355-3600 Redding 530-229-3820 Pico Rivera 562-699-6767 West Sacramento 916-375-3540 TX El Paso 915-872-1001 NM Albuquerque 505-345-8383 Farmington 505-324-8601

Waukesha-Pearce Industries, Inc. www.wpi.com TX Beaumont/Port Arthur 409-721-5305 Buffalo 903-322-7150 Corpus Christi 361-884-8275 Edinburg 956-386-0107 Houston 713-723-1050 Kilgore 903-984-2011 Pflugerville 512-251-0013 San Antonio 210-648-4444 Tomball 281-351-9016

5IF 8" 5JFS *OUFSJN 8IFFM -PBEFS JT B DMBTT MFBEJOH QFSGPSNFS XJUI JNQSPWFNFOUT JO QSPEVDUJPO GVFM FGm DJFODZ PQFSBUPS DPNGPSU BOE TFSWJDFBCJMJUZ t ,PNBUTV 4NBSU -PBEFS -PHJD SFEVDFT GVFM DPOTVNQUJPO XIJMF NBJOUBJOJOH QSPEVDUJPO t -BSHF DBQBDJUZ UPSRVF DPOWFSUFS XJUI MPDL VQ QSPWJEFT GVFM TBWJOHT t /FX w -$% NVMUJ GVODUJPO NPOJUPS QBOFM QSPWJEFT FBTZ BDDFTT NBDIJOF EJBHOPTUJDT. t ,PNBUTV $"3& QSPWJEFT DPNQMJNFOUBSZ 5JFS NBJOUFOBODF JODMVEJOH ,PNBUTV %JFTFM 1BSUJDVMBUF 'JMUFS FYDIBOHF $POUBDU ZPVS ,PNBUTV EJTUSJCVUPS GPS EFUBJMT

www.komatsuamerica.com

Page 16 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc. Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale....$85 Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale ..............$85 Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale .......... $85 Bobcat E35 Compact Excavator, 1:25 Scale ................................$50 Bobcat E55 Compact Excavator, 1:25 Scale ................................$60 Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ......................$25 Bobcat S175 Skid Steer Loader, 1:25 Scale ..................................$65 Bobcat S510 Skid Steer Loader, 1:25 Scale ..................................$65 Bobcat S530 Skid Steer Loader, 1:25 Scale ..................................$65 Caterpillar D7E Track-Type Tractor, 1:50 Scale - $90

Bobcat S550 Skid Steer Loader, 1:25 Scale ..................................$65

International TD-14 Crawler Dozer, 1:16 Scale - $150

Bobcat S570 Skid Steer Loader, 1:25 Scale ..................................$65

Caterpillar 740B EJ Articulated Dump Truck w/ Ejector Body, 1:50

Komatsu D65PX-17 Dozer, 1:50 Scale ............................................$80

Bobcat T550 Track Loader, 1:25 Scale............................................$70

Scale......................................................................................................$70

Komatsu D155AX Dozer w/ripper, 1:50 Scale ..............................$95

Bobcat T770 Compact Track Loader, 1:25 Scale..........................$45

Caterpillar 963D Track Loader, 1:50 Scale ....................................$60

Komatsu D375A Dozer, 1:50 Scale................................................$125

Bobcat 225 Compact Excavator, 1:25 Scale..................................$50

Caterpillar 966K Wheel Loader, 1:50 Scale....................................$95

Komatsu D475A Dozer w/ripper, 1:50 Scale................................$160

Case CX250C Excavator, 1:50 Scale ............................................$195

Caterpillar 977 Traxcavator, 1:50 Scale ..........................................$60

Komatsu GD655 Motor Grader, 1:50 Scale....................................$90

Case 95XT Skid Steer Loader (Conrad), 1:32 Scale ....................$60

Caterpillar 988K w/ Grapple, 1:50 Scale ......................................$160

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........................$80

Case 580 ST Backhoe/Loader, 1:50 Scale ....................................$95

Demag Tracked Paver (NZG), 1:50 Scale ......................................$75

Komatsu HM250 Articulated Dump Truck, 1:50 Scale ................$75

Case 1102 Vibromax Roller, 1:35 Scale ........................................$100

Doosan Moxy MT31 Articulated Truck ........................................$100

Komatsu HM400-3 Articulated Truck, 1:50 Scale ......................$100

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,

Dynapac SD2500 CS Road Paver, 1:50 Scale ............................$150

1:50 Scale ..........................................................................................$100

Grove TM1500 White 12 Axle Truck Crane, 1:50 Scale ............$160

Caterpillar 775G Off-Highway Truck, 1:50 Scale ........................$110

Hamm 3307 Compact Roller, 1:34 Scale ........................................$45

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale..................$65

Hamm 3414 Pad Foot Compactor, 1:50 Scale ..............................$90

Caterpillar D6K Track-Type Tractor, 1:50 Scale ............................$65

International 175 Crawler Loader, 4in1, 1:50 Scale ......................$65

Caterpillar D7E Track-Type Tractor, 1:50 Scale ............................$90

International 433 Dual Engine Pay Scraper, 1:25 Scale ............$225

Caterpillar D8L Track-Type Tractor (NZG 233), 1:50 Scale..........$75

International 560 Pay Loader, 1:25 Scale ....................................$145

Caterpillar D8T Track-Type Tractor, 1:50 Scale............................$110

International TD-15 Dozer w/Umbrella, 1:50 Scale ......................$60

Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ........$75

International TD-20E Dozer, 1:64 Scale ..........................................$24

Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........................$50

International TD-25 Dozer w/Ripper, 1:25 Scale..........................$180

Leeboy 8816 Asphalt Paver, 1:50 Scale..........................................$90

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ..........$185

JCB 3CX Backhoe/Loader, 1:50 Scale............................................$75

Liebherr R916 Litronic Excavator, 1:50 Scale ............................$150

Caterpillar D10T Track-Type Tractor, 1:50 Scale ........................$100

John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ..........$70

Link Belt 800 X2 Excavator, 1:50 Scale ........................................$200

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........................$100

John Deere 200C LC Excavator, 1:50 Scale ..................................$45

Poclain TC45 Excavator, 1:50 Scale..............................................$140

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale ....$150

John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........................$45

Vogele 1900-2 Tracked Paver, 1:50 Scale........................$140

Caterpillar 323D L Excavator, 1:50 Scale........................................$90

John Deere 624J Military Wheel Loader, 1:50 Scale....................$40

Vogele MT3000 Powerfeeder, 1:50 Scale ....................................$140

Caterpillar 336D L Excavator, 1:50 Scale........................................$95

John Deere 772CH Motor Grader, 1:50 Scale................................$45

Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........................$115

Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..............$50

John Deere 959K Track Feller Buncher, 1:50 Scale ....................$90

Volvo EC220D Excavator, 1:50 Scale............................................$115

Caterpillar 365B L Series II Excavator, 1:50 Scale........................$75

Komatsu CK25 Compact Track Loader, 1:50 Scale ....................$45

Volvo L220G Wheel Loader, 1:50 Scale........................................$120

Caterpillar 416B Backhoe/Loader (NZG 285), 1:50 Scale............$70

Komatsu D51 EX Dozer, 1:50 Scale ................................................$85

Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale............................$90

Caterpillar 428 Backhoe/Loader (NZG 2851), 1:50 Scale ............$70

Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ..........................$80

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ..........$145

Komatsu PC200 Excavator, 1:50 Scale ..........................$160 Komatsu PC490LC-10 Excavator, 1:50 Scale ................ $175 Komatsu WA470-7 Wheel Loader, 1:50 Scale ..............................$75 Komatsu WA500 Wheel Loader, 1:50 Scale ..................................$80 Komatsu WB146 Backhoe/Loader, 1:50 Scale..............................$75 Komatsu WH613 Telehandler, 1:50 Scale ......................................$65 Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..........$90 Leeboy 785 Motor Grader, 1:64 Scale ............................................$90

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 17

RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM. Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR. RuleTheJobsite.com

Ditch Witch of Oklahoma/Tulsa

RGW Equipment Sales

Vermeer of Texas-Louisiana

Edmond, OK 73034 405-348-4633

www.rgwequipmentsales.com

www.vermeertexas.com

Tulsa, OK 74116 918-438-1560

550 Greenville Road Livermore, CA 94550 925-606-2456 925-606-2492 Fax

Alamo, TX 956-782-5580

Waco (Ross), TX 254-829-9655

Lubbock, TX 806-745-1245

Amarillo, TX 806-622-2407

Irving, TX 972-255-3500

Round Rock, TX 512-244-0505

Corpus Christi, TX 361-887-8499

Houston (Cypress), TX 281-671-6000

San Antonio, TX 210-337-7700

Denham Springs, LA 225-665-7900

Kilgore, TX 903-988-9868

Page 18 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

FACTORY-DIRECT ACTOR Sales & Rental Southwest U. U.S.’ S.’ COMPLE COMPLETE TE FactoryFactor yDirect Rental Resource Largest selection of USA-made trench shielding and shoring equipment. Custom shields built to your specs. 6LWH 6SHFL¿F (QJLQHHULQJ 6XSSRUW IURP (I¿FLHQF\ 3URGXFWLRQ¶V Special Operations Shoring Division. OSHA A Trench Safety Training. Steel T Trench rench Shields

Build-A-Box™

Slide Rail System

NORTH TEXAS

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL

3602 N. Sylvania Ave. Ft. Woorth, TX 76111 (815) 502-1444

HOUSTON

2515 Galveston Rd. Houston, TX 77017 (713) 671-2551

ZZZ HI¿FLHQF\VKRULQJ FRP ZZZ HI¿FLHQF\VKRULQJ FRP

• No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

Hawthorne Cat Hires Farmer as Assistant Sales Manager Hawthorne Cat, the exclusive Cat dealer in San Diego and the Pacific Region, has expanded the San Diego machine sales team with the addition of Ross Farmer as assistant sales manager. Farmer began his career in the insurance industry where he gained more than 12 years of sales experience. He recently served as president of Comprehensive Benefit Advisors and president of Farmer & Associates. As assistant sales manager of Hawthorne Cat, Farmer will manage the daily activities and provide support for machine service and field representatives. “I am very excited about joining the Hawthorne Cat team. We are working together to streamline our sales experience to better serve Hawthorne Cat customers,” said Farmer. “This is a great opportunity to increase our revenue and enhance the customer experience by providing our customers with the knowledge and expertise they deserve.” David Dean, director of sales, added, “Ross Farmer’s leadership matched with his sales experience make him the perfect fit for

As assistant sales manager of Hawthorne Cat, Farmer will manage the daily activities and provide support for machine service and field representatives.

this role. His fresh outlook will help Hawthorne Cat continue to deliver the best customer experience in the industry.” For more information, visit www.hawthornecat.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 19

THE JCB BACKHOE LOADER

COMING SOON!

Versatility You Can Depend On Since inventing the backhoe in 1953 JCB has continued to set the standard for backhoe innovation. And with 28 families of attachments at your fingertips, that’s versatility unmatched in the industry. Whether your work day calls for a hammer, a compactor or a 6-in-1 bucket, you can count on the versatility the JCB provides. It’s just another reason why nearly 1 out of every 2 backhoes sold in the world is a JCB. And further proof that when it comes to backhoes, JCB sets the standard.

Enjoy fuel efficiency 21% better than the competition with JCB’s EcoMax engine. 3397

CONTACT YOUR JCB DEALER FOR MORE INFORMATION.

ADOBE

DARR Dallas, TX 214-819-3991 Longview, TX 800-245-7702 Waco, TX 800-245-7706 Texarkana, TX 888-327-7370

Tulsa, OK 866-402-4248 Oklahoma City, OK 409-898-8700

Houston, TX 713-692-4471 Beaumont, TX 409-898-8700

www.darrjcb.com

www.adobejcb.com

San Antonio, TX 210-662-9701 www.jcbofsouthtexas.com

Lubbock, TX 806-745-2000 Wichita Falls, TX 940-687-2726 Odessa, TX 432-337-2823 Amarillo, TX 806-372-8386

Midland, TX 432-685-9999 Clovis, NM 575-742-2726 www.ascoeq.com

Page 20 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 21

www.liugongna.com T O U G H W O R L D . T O U G H E Q U I P M E N T. We make one of the broadest lines of construction, mining, road building and material handling equipment in the world. All

EVERY JOB. EVERYWHERE.

backed by top-notch warranty, training, parts and service support. Contact your local dealer today for more information...

Dearler 1 Houston, TX p. (555) 555 - 5555 www.dealersite.com

Noble Equipment

Dealer 2 Dealer 3 Dealer 4 505 • Houston, TX San77073 Austin, TX Rankin Road Dallas, TX Antonio, TX p. (555) 555 - 5555 p. (555) 555 5555 p. (555) 281-443-7667 • Fax 281-443-7886 555 - 5555 www.dealersite.com www.dealersite.com www.dealersite.com

www.nobleiron.com

d Page 22 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

We Keep Equipment Moving! Call me today, I’ll be glad to help you! ~ Kevin » The #1 Selling Rubber Track Brand In America! » REPLACEMENT UNDERCARRIAGE Bobcat®, Gehl®, Mustang®, Takeuchi®, CAT® 279, 289 & 299

800-365-7260

Order online anytime » depparts.com »

WE ACCEPT

Ashland, VA » Jacksonville, FL » Dallas, TX » Cincinnati, OH » Portland, OR » Sacramento, CA » Schenectady, NY

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com 6715 W. Reno Oklahoma City, OK 73137 800/375-3339 Fax: 405/787-5973 12321 E. Pine St. Tulsa, OK 74116 800/375-3733 Fax: 918/437-7065 1629 Vision Dr. Abilene, TX 79602 877/577-5729 3922 I-40 East Amarillo, TX 79103 800/283-1247 8505 So Central Expwy Dallas, TX 75241 800/753-1247 1450 NE Loop 820 Fort Worth, TX 76106 877/851-9977 3201 E Slaton Rd Lubbock, TX 79404 866/289-6087

7301 East I-20 Odessa, TX 877/794-1800 432/333-7000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 23

EXPERIENCE EX PERIENCE THE THE DIFFERENCE DIFFERENCE The p The premium remium cabs cabs a and nd p precision recision p pilot ilot c controls ontrols of of Takeuchi Takeuchi Track Track L Loaders oaders g give ive y you ou tthe he comfort, c omfort, power power a and nd fl flexibility exibility tthat hat y you ou n need eed tto og get et tthe he job job d done. one. Experience Experience Takeuchi Ta T akeuchi — Visit V isit your your local local dealer dealer today. today.

POWER MOTIVE CORPORATION

DITCH WITCH OF EAST TEXAS

DITCH WITCH OF ARIZONA

www.powermotivecorp.com

www.witchequipment.net 7809 Hwy. 271 Tyler, TX 75708 903-592-6226 Fax: 903-535-9768

www.ditchwitchaz.com 4028 S. 36th St. Phoenix, AZ 85040 602-437-0351

DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 888-271-3308

Milliken 888-271-3308

Colorado Springs 888-271-3308

Cheyenne 888-271-3308

Durango 888-271-3308

Tucson, AZ 520-579-0261

TRI-WEST TRACTOR www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94450 925-455-8200 Fax: 925-455-8220

WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com 12320 South Main St. Houston, TX 77035 713-551-0506 Fax: 713-551-0798

Corpus Christi, TX 361-884-8275

Edinburg, TX 956-386-0107

San Antonio, TX 210-648-4444

Austin, TX 512-251-0013

Tomball, TX 281-351-9016

Beaumont, TX 409-721-5305

Buffalo, TX 903-322-7150

Grand Junction 888-271-3308

FIND F IND O OUT UT W WHAT H AT O OTHERS TH ERS K KNOW. N OW. V VISIT I S IT T TAKEUCHI-US.COM AKEUCHI - US .COM TO TO FIND F I N D THE T H E DEALER D E A L E R NEAREST N E A R E S T YOU. YO U .

Page 24 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Paving

SECTION

Pages 25-33

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Hamm Adds Four Models With Oscillation Technology Hamm offers two different chip spreaders for rollers from 5,000 lbs. (2,268 kg) operating weight.

Thirty years after Hamm built the first oscillatory rollers, this intelligent technology is now making its debut in the minus 9,000 lbs. weight class at Hamm. A total of four models with oscillation technology are available, identifiable by an “O” in the name: HD 10 VO (5,500 lbs. [2,494 kg]), HD 12 VO (6,000 lbs. [2,721 kg]), HD 13 VO (8,800 lbs. [3,991 kg]) and HD 14 VO (9,500 lbs. [4,309 kg]). All of them are equipped with one oscillatory and one vibratory drum. The advantage of oscillation is it achieves a rapid increase in compaction because the oscillation drum directs tangential thrusting forces into the material to be compacted while remaining constantly in contact with the ground. The combination of continuously acting static load and changing dynamic shear forces in the material brings about a faster, better and more gentle compaction. Moreover the amplitude and in turn the compaction power adapt automatically to the stiffness present. Hamm achieves this effect without electronics, but through intelligent application of the laws of physics.

Wide Application Spectrum for Oscillatory Rollers The new Hamm rollers with one oscillatory and one vibratory drum increase compaction speed and quality, according to the manufacturer. Applications can be found in urban centers for example. The reason: oscillation drums can compact dynamically even on narrow construction sites, because this compaction technology does not disturb buildings or pipework below the road surface through vibration. Oscillation also optimizes compaction at joints to existing road surfaces, because it does not damage the cold asphalt. So the compaction on small job sites will be more effective than before when using oscillatory rollers. During the compaction of thin layers on tack coat or spray seal, the high compaction speed makes a noticeable improvement. A further plus point in favour of oscillatory rollers is that they also work very efficiently on cooled asphalt. Last but not least, oscillatory compaction also optimizes many landscaping applications. Water-

There are countless areas of application for Hamm’s CompactLine with oscillation, for example the compaction of thin layers on tack coat or spray seal, asphalt compaction in confined urban areas or along joints and even compaction of water-bound path surfaces in landscape gardening.

bound path surfaces or asphalt cycle paths can be compacted significantly more efficiently with the new rollers than heretofore. HD 10C VT Combi Roller The HD 10C VT is the smallest combi roller in the CompactLine with a working width of 3.5 ft. (1.06 m) and operating weight of 3,500 lbs. (1,587 kg). It comes with permanent all-wheel drive as standard. This distinguishes it from all other compact rollers in this size and gives it outstanding gradeability in all situations, according to the manufacturer. New Options: Drivers’ Cab and Chip Spreader Hamm has developed a fullyenclosed driver’s cab for the largest models in the compact class, the HD 13 and HD 14. The panoramic cabin features full

height glazing and provides an overview of the construction site. Hamm also has thought about many other niceties and safety features: heating, radio, screen wipers, four halogen front headlights (H9) and two rear spotlights are some of the cab options. With its own chip spreaders for the CompactLine, Hamm offers a complement to the rollers for repair work on motorways or other heavily used roads. The linear spreader has stepless adjustment and is operated from the driver’s seat. Its diffusion grill produces a remarkably even distribution pattern. The chip spreader is available in two spreading widths: 3.28 ft. (1 m)/53 gal. (200 L) or 3.95 ft. (1.20 m)/63 gal. (240 L). Mounting is easy with a forklift truck and the mounting point close to the machine frame ensures a favorable weight distribution.

Drum Lighting and Hinged Scraper for More Quality and Safety Hamm has included an extremely bright drum lighting in its program for the entire CompactLine. The environment-friendly LED lighting brings good illumination to the working area. This is an important quality and safety feature, as the compact rollers frequently work at the end of the roller group in poorly illuminated areas. Another new option for all CompactLine models is the spring loaded hinged scraper. It keeps the drums clean while compacting and can be hinged out of the way by means of a foot pedal for replacement or cleaning. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 26 • November 1, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

BEE EQUIPMENT SALES, LTD

KIRBY-SMITH MACHINERY, INC.

ROMCO EQUIPMENT CO.

www.beeequipmentsales.com Lubbock TX • 806/745-1511

www.kirby-smith.com Oklahoma City, OK • 800/375-3339

www.romco.com

Tulsa, OK • 800/375-3733 Kansas City, KS • 877/851-5729

Austin 512/388-2529 877/851-1026

Dallas, TX 214/819-4100 800/227-6626

Buffalo 903/322-5602

Ft. Worth 817/626-2288 866/966-4602

Longview 903/758-5576 San Antonio 210/648-4600 800/966-4601

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2014 • Page 27

Page 28 • November 1, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Wirtgen’s W 250i WIDRIVE Matches Brain With Brawn Wirtgen’s Tier IV interim-compliant W 250i offers high rates of productivity, maximum cost efficiency and fuel-efficient i-machine technology. This large cold mill can remove asphalt layers with a milling depth of up to 14 in. (35.5 cm), and cut portland cement concrete surfaces at a high advance rate. This is possible due to its muscular power plant, matched with WIDRIVE intelligent machine management system, three selectable milling drum speeds, and dual engine concept, which keeps operating costs exceptionally low for a cold milling machine in this performance class, according to the manufacturer. The dual engines of the W 250i — also seen on the W 210i — makes virtually two machines in one: a high-performance milling machine with the full power of two engines totaling 990 hp, and a costefficient mill with a single engine at 599 hp to economically remove softer asphalt surface courses or porous asphalt, for example. The machine operator can set the optimum drum speed for any job from the operator’s platform via a selector switch, allowing him to adapt immediately to changing conditions. For standard milling jobs, such as the removal of a surface course, the W 250i can operate with the medium milling drum speed of 1,800 rpm, which produces reclaimed asphalt pavement (RAP) at preferred aggregate sizes. When removing thin surfaces at the maximum advance rate, the high milling drum speed of 2,000 rpm may be selected, producing a superior milling texture. And for maximum productivity at lowest cost, the slowest speed of 1,600 rpm is the right choice for reduced fuel consumption and low cutting tool wear. The W 250i’s standard cutting width is 7 ft. 3 in. (2.2 m), but this can be extended with additional drum units for working widths of 8 ft. 2 in., 10 ft. 2 in., 11 ft. 6 in., 12 ft. 6 in., and 14 ft. 5 in. (2.5, 3.1, 3.5, 3.8 and 4.4 m). The optional FCS Light quick-change system for milling drums permits a variety of different milling operations via different milling drums. At the operator’s platform, a multifunctional control display

The dual engines of the W 250i — also seen on the W 210i — makes virtually two machines in one: a high-performance milling machine with the full power of two engines totaling 990 hp, and a cost-efficient mill with a single engine at 599 hp to economically remove softer asphalt surface courses or porous asphalt, for example.

serves as a practical information hub. It can be swung to the left or right of the operator, together with the level pro control panel, and displays operating status and service data. The control display provides user-friendly diagnostic options with clear graphics for identifying the source of any problem. Another handy function is the logging of job data at the end of the day, showing how many trucks have been loaded and the overall tonnage achieved. Wirtgen's WIDRIVE machine management system handles many tasks for the operator in automatic process chains, making it easy to learn how to operate and control the W 250i. An optional camera system with two or six cameras also is available to monitor up to

six working areas on the control display. The optional parallel-to-surface (PTS) system automatically aligns the W 250i parallel to the road surface, ensuring simple, accurate operation of the machine in demanding profiling jobs. PTS also assists the operator in positioning the machine in the milled cut to initiate the milling process. In automatic mode, the system takes care of all the steps that the operator would otherwise need to select manually, one after another. The operator activates the level pro level control system at the flick of a switch, and all four crawler track units of the large milling machine are lowered simultaneously at high speed. When the milling drum unit reaches the surface to be milled, the lowering

speed is reduced and the milling drum slowly penetrates the material down to the set depth. The automatic process helps to prevent excessive cutting tool wear or even tool failure when milling starts. The same applies when the W 250i is aligned transverse to the direction of travel. In many cases, cold milling machines need to overcome significant differences in height when being moved into or out of the milled cut. The integrated four-fold, full-floating axle balances out all four track units quickly and reliably to reduce the machine’s lateral inclination to a minimum. This lends a high degree of stability to the large milling machine while the operator moves forward normally, according to the manufacturer. The W 250i’s intelligent speed

control (ISC) system prevents crawler track slip and ensures perfect traction of all track units to achieve maximum milling performance. This, in turn, reduces track pad wear. When negotiating bends, the ISC system automatically increases the speed of the outer crawler tracks depending on the steering angle. As a result, even extremely narrow bends can be milled using the all-track drive. An optional vacuum cutting system (VCS) to reduce particulate emissions at the cutter head is available. For more information, call 615/501-0600 or visit www.wirtgenamerica.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2014 • Page 29

RDO EQUIPMENT CO. www.rdoequipment.com Riverside, CA 800/494-4863 Indio, CA 760/342-8900 Imperial, CA 800/464-4331 Lakeside, CA 619/270-4300 Fort Worth, TX 800/551-4905 Hewitt, TX 800/551-8258 Irving, TX 800/437-6342 Laredo, TX 956/718-1909 Pflugerville, TX 512/272-4141 New Braunfels, TX 800/880-0880 Ehrenberg, AZ 928/923-9611 Flagstaff, AZ 928/526-0639 Phoenix, AZ 602/415-4700 Prescott, AZ 928/776-8300 Tucson, AZ 520/294-5262 Wellton, AZ 928/785-4276 Yuma, AZ 928/341-7100

KOMATSU EQUIPMENT CO. 1486 S. Distribution Drive Salt Lake City, UT 84104 801/972-3660 Fax: 801/954-0936 4660 Pioneer Way Elko, NV 89801 775/753-7557

4 RIVERS EQUIPMENT

FOUR SEASONS EQUIPMENT

2301 Candelaria Rd. NE Albuquerque, NM 505/884-2900

1100 Troy King Rd. Farmington, NM 505/326-1101

8111 Mills Road, Houston, TX 77064 281/807-9777 • Fax: 281/807-1233

11323 Rojas Drive El Paso, TX 915/598-1133

2400 W. Bender Blvd. Hobbs, NM 575/392-6923

1425 Swisco Road, Lake Charles, LA 70665 337/626-6000 • Fax: 337/626-7600

POWER MOTIVE CORP.

Colorado Springs, CO 888/271-3308

www.powermotivecorp.com 5000 Vasquez Blvd. Denver, CO 80216 888/271-3308

Milliken, CO 888/271-3308

Grand Junction, CO 888/271-3308

Durango, CO 888/271-3308 Cheyenne, WY 888/271-3308

3825 Losee Road North Las Vegas, NV 89030 702/399-1004 900 Marietta Way Sparks, NV 89431 775/356-1334 6253 West Gilbert Industrial Court Hurricane, UT 84737 435/986-1000 405 Jonah Drive Rock Springs, WY 82901 307/686-1300

Page 30 • November 1, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com jfwequip@aol.com

Bomag Compactor Offers Intelligent Machine Controls

Serving the Asphalt Industry for 25 Years 1998 Marathon TPS250T Distributor, 1998 Marathon TPS250T tack distributor, trailer mounted 250 gallons, Honda 9 hp gas engine, 18 GPM pumping system, 6 ft spray bar, 5 ft spray wand w/hose on hose reel, 10” filler lid, dual propane burners

2002 Etnyre Shooter Distributor, 2000 gallons, computerized w/1 ft cut-offs, propane heat, 12 ft spray bar, front mount pump, 2002 IH 4700 w/T444E diesel engine, 5 spd trans, 2 spd axle, air brakes, a/c, 33,000 GVW

Bomag’s BMP8500 articulated multi-purpose compactor offers versatile operation for compaction of cohesive, semi-cohesive and non-cohesive soil types in applications such as trenches and foundations.

2001 Blaw Knox PF 4410 Paver, Ultimat 8-16 ft electric screed, Cummins diesel engine, fume extractor, power crown & slope

1996 Rosco SPRH Chip Spreader, Cummins 5.9L diesel engine, 10 ft spread hopper, manual controls

2014 Marathon KERA10 Crack Sealer, New Marathon KERA10 walk behind crack sealer, 10 gallon material vat, full wrap around oil jacket, manual full sweep agitation, single burner with flame out protection, oil temperature gauge, material temperature gauge, front caster wheel, heated 3/4" discharge valve

2008 Volvo DD138HFA Roller, 84" double drum high frequency vibratory roller, Cummins 6.7L 173 hp diesel engine, double drum drive, scrapers, water system, ROPS canopy

2005 Caterpillar AS2301 Screed, Caterpillar Screed low hour take off, 10 - 18 1/2 feet, diesel heat, power crown & slope

2014 Marathon MM120PT Mastic Mixer, Oil jacketed, trailer mounted, 120 gallon, 25hp Kohler propane engine, propane heat, full sweep with agitation, overnight heat, hand held torch, tool heater

2000 Athey 7-12 Force Feed loader, hydrostatic drive, J.D. diesel engine, 28 ft conveyor, a/c & heat, radio, belt is in good condition

3517 Wayne White Rd., Climax, NC 27233

Featuring intelligent machine controls for enhanced performance and optimal safety, Bomag’s BMP8500 articulated multi-purpose compactor offers versatile operation for compaction of cohesive, semi-cohesive and non-cohesive soil types in applications such as trenches and foundations. The BMP8500 is powered by a 19.4-hp (14.4 kW), three-cylinder, water-cooled Kubota diesel engine that features EcoMode, a system that automatically idles the engine to conserve fuel during inactivity. Using Bomag’s intelligent vibration control (IVC) to achieve consistent compaction results, the compactor has a dual exciter system and two selectable amplitudes that deliver output options of either 8,000 or 16,000 lbs. of centrifugal force. Rental centers or end users can quickly adjust the compactor’s working width from 24 to 33.5 in. (61 to 85 cm) with standard bolt-on drum extensions. The drum extensions are easily aligned and installed in 10 to 20 minutes, accommodating different trench dimensions while avoiding the hassle of replacing entire drum sets, according to the manufacturer. Operation of the BMP8500 is simple, due to a dual function cable/radio remote control. The compactor’s hydrostatic drive system offers two travel speed ranges and provides

a high gradeability of 45-percent with vibration. Additionally, the all-drum drive provides enhanced traction, while a clear-sided design with no lateral overhang ensures full compaction against trench walls and obstacles. The BMP8500 is equipped with the Bomag operator safety system (BOSS), which increases worker safety by automatically stopping machine travel if the operator is in the safety zone. An integrated diagnostic system displays fault codes to make troubleshooting easy. Maintenance also is simplified by swing-out covers that fully open to 90 degrees, providing efficient access to the engine and internal systems. Additionally, the durable composite hoods are impact resistant to protect the engine and components. Other standard features include articulated steering, high-profile drums with a 1-in. (2.5 cm) padfoot height, lockable hoods, hinged center lifting points for balanced lifts, hydrostatic service brakes and a spring-applied, hydraulically released parking brake. For more information, call 309/853-3571 or visit www.bomag.com/us. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2014 • Page 31

UNBEATABLE TEAM.

The Wirtgen Group owes its strength to the excellence of its four product brands – Wirtgen, Vögele, Hamm and Kleemann – with their unique wealth of experience. Put your trust in the Wirtgen Group team.

www.wirtgenamerica.com

ROAD AND MINERAL TECHNOLOGIES KIRBY-SMITH MACHINERY INC. www.kirby-smith.com 6715 W. Reno Oklahoma City, OK 800-375-3339 Tulsa, OK 918-438-1700 Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600

Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826 Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000

COOPER EQUIPMENT CO.

NUECES POWER EQUIPMENT

17474 Judson Rd. San Antonio, TX 210-657-5151

www.nuecespower.com Corpus Christi, TX 361-289-0066 Edinburg, TX 956-702-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 Vinton, TX 915-541-0066 Houston, TX 713-247-0066

MODERN MACHINERY www.modernmachinery.com Spokane, WA 800-541-0754 Kent, WA 800-669-2425 Rochester, WA 800-304-4421 Portland, OR 800-950-7779 Eugene, OR 800-826-9811

Boise, ID 800-221-5211 Pocatello, ID 800-829-4450 Missoula, MT 800-332-1617 Kalispell, MT 800-434-4190 Billings, MT 800-735-2589

HONNEN EQUIPMENT CO. www.honnen.com 5055 E. 72nd Ave. Commerce City, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Idaho Falls, ID 208-523-9915 Salt Lake City, UT 801-262-7441

Ogden, UT 801-627-0049 St. George, UT 435-652-8003 Casper, WY 307-266-4474 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284

Page 32 • November 1, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Contractors Need Small, Powerful Machines for Tight Spaces By Jeff Winke SPECIAL TO CEG

Some projects have small, tight spaces that require compact equipment with the maneuverability of a sports car, not an 18wheeler. In these cases, contractors employ small dozers, mini-excavators and compact track loaders. Add to that mix a small milling machine specifically suited for removing road pavements, milling pavement strips, or milling tie-ins. The latest addition from Roadtec Inc. to its line of milling machines is the RX-100e — a highly maneuverable mini-size mill with a base cutting width of 20-in. (50 cm), maximum cutting depth of 8-in. (20 cm), and a drum diameter with teeth of 30-in. (75 cm). The weight, power and dimensions of this compact machine make it the perfect option for cutting trenches, demarcation and cutting around manhole covers, or for other narrow spaces. The RX-100e features a shipping weight of 15,840-lbs. (7,184 kg), a length of 12-ft. 8-in. (3.87 m), and a width of 4-ft. 8-in. (1.42 m). The RX-100e is a 140 hp (103 kW) machine with a hydraulically driven drum and features large access doors on both sides of the machine for maintenance

The latest addition from Roadtec Inc. to its line of milling machines is the RX-100e — a highly maneuverable mini-size mill with a base cutting width of 20-in. (50 cm), maximum cutting depth of 8-in. (20 cm), and a drum diameter with teeth of 30-in. (75 cm).

access to the interior components. A Cummins QSB 4.5 Tier IVi compliant diesel engine powers the small utility cold planer. The RX-100e 140 hp engine is cooled by a high-efficiency variable speed fan. The speed of the fan is based on cooling demand, which is designed to decrease the engine load and increase the fuel economy of the machine. To add functional versatility, the right, rear leg tube on the RX-100e is positioned alongside the cutter housing for normal milling, but the leg tube also can be rotated to a position in front of the cutter housing for flush cut operations. The operator station includes simple controls and the operator seat, which incorporates comfort suspension and can slide out to the right of the machine for enhanced visibility. The Roadtec RX-100e utility milling machine is expected to be the ideal choice for congested urban areas and other confined work sites. Jeff Winke is a business and construction writer based in Milwaukee, Wis. He can be reached through www.jeffwinke.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2014 • Page 33

Introducing 12 tons of stress relief

BOMAG introduces the new standard for affordable, user-friendly 12-ton soil compactors. The new BW211-40 series is loaded with ergonomic features to reduce operator fatigue. Plus it delivers over 53,000 lbs. of centrifugal force (nearly 62,000 lbs. for pad foot roller) over its massive 84-in working width. Other benefits include: •Redesigned, vibration-isolated operator’s platform with easy to use controls and improved sight lines •Shorter stop to stop steering input for less fatigue, 12-degree oscillation and 35-degree steering angle for optimum maneuverability •Easy open, no tool hood for better engine access •EPA-compliant Tier 3 diesel engines For detailed specs and full list of features and benefits on BOMAG 40-series rollers, visit

www.bomag-americas.com

THE COMPACTION EXPERTS

500 E. 62nd Ave. Denver, CO 80216 303-288-6801 Fax: 303-288-6809 2329 River Road Grand Junction, CO 81505 970-243-0722 Fax: 970-243-0726

2940 E. Las Vegas St. Colorado Springs, CO 80906 719-392-1155 Fax: 719-390-9604

100 Barr Ave. SE Albuquerque, NM 87105 505-344-9466 Fax: 505-345-4715

8806 E. US Hwy. 34 Johnstown, CO 80534 970-669-6209 Fax: 970-669-6280

3251 MJB Road Casper, WY 82601 307-577-9700 Fax: 307-577-9703

www.yellowhouse.us

www.rgwequipment.com 550 Greenville Road Livermore, CA 94550 925-606-2456 Fax: 925-606-2492

P.O. Box 31388 Amarillo, TX 79120 806-335-1681 Fax: 806-335-3932 Lubbock, TX 806-763-0473 Odessa, TX 432-580-3337

Abilene, TX 325-677-2291

Enid, OK 580-233-5000

San Angelo, TX 325-651-3337

Tulsa, OK 918-245-5926

Wichita Falls, TX 940-322-3337

McAlester, OK 918-423-2555

Page 34 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ASK

ABOUT OUR FINANCING

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 35

You Can’t Beat The System.

CALL FOR A

No other company offers such an easy-to-use system for horizontal directional drilling. The complete package. Directional drills. Trackers. Fluid management systems. All designed to work together to simplify drilling and backreaming through some of the toughest conditions. For details, see your dealer or visit ditchwitch.com.

FREE DEMO

Your Window To The Underground. Like real estate, underground construction is all about location, location, location. With electronic locators like the 830R/T and the 2450GR ground penetrating radar, you can quickly locate buried telephone, CATV, power, gas and water lines. Ask your dealer about the complete line of Ditch Witch®utility locators, or visit ditchwitch.com.

ditchwitch.com

Ditch Witch of East Texas Ditch Witch of Oklahoma Witch Equipment Co., Inc. Ditch Witch of Oklahoma Equipment Co., Inc. Edmond, OK | 405-348-4633 Tyler, TX | 903-592-6226 Fort Worth, TXWitch | 817-429-4824 Edmond, OK | 405-348-4633 Fort Worth, TX | 817-429-4824 Ditch Witch of Tulsa Ditch Witch of New Mexico, Inc. Witch Equipment Co., Inc. Ditch Witch of New Mexico, Inc.OK | 918-438-1560 Equipment Co., Inc. Tulsa, Albuquerque, NM | 505-345-1888 Hewitt, TXWitch | 254-666-3344 Albuquerque, NM | 505-345-1888 Hewitt, TX | 254-666-3344 ©2011 The Charles Machine Works, Inc.

Ditch Witch Southwest Ditch Witch ofTXEast Texas Lubbock, | 806-745-6866 Tyler,Odessa, TX | 903-592-6226 TX | 432-617-8351 Ditch Witch Southwest Lubbock, TX | 806-745-6866

Ditch Witch of Arkansas Ditch of Tulsa Springdale, AR |Witch 479-419-9771 Tulsa, OK | 918-438-1560 Ditch Witch of Arkansas Ditch Witch of Arkansas Benton, AR | 501-316-3200 Springdale, AR | 479-419-9771

Ditch Witch of Arizona Ditch Witch of Arkansas Phoenix, AZ | 602-437-0351 Benton, AR | 501-316-3200 Ditch Witch of Southern Arizona DitchAZ Witch of Arizona Tucson, | 520-579-0261 Phoenix, AZ | 602-437-0351

Page 34 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ASK

ABOUT OUR FINANCING

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 35

You Can’t Beat The System.

CALL FOR A

FREE DEMO

ditchwitch.com

Ditch Witch Southwest Ditch Witch ofTXEast Texas Lubbock, | 806-745-6866 Tyler,Odessa, TX | 903-592-6226 TX | 432-617-8351 Ditch Witch Southwest Lubbock, TX | 806-745-6866

Page 36 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 38 • November 1, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

CASE

JOHN DEERE Model Engine Power hp (kw) Loaders 605K 110 (83) 655K 145 (110) 755K 190 (141.7) Dozers 450J 70 (52) 550K 85 (63) 650K 101 (75) 700K 125 (93) 750K 155-165 (116-123) 850K 187-205 (139.5-152) 850K WH 200 (151) 950J 247 (184) 950J WH 247 (184) 1050J 335 (250) 1050J WH 335 (250) 764 HSD200-210 (149-157)

Weight lbs. (kg) 26,940 (12,220) 40,614 (18,422) 45,178 (20,492)

Engine Type

16,283-17,525 (7,386-7,949) J. Deere PowerTech M 4045 19,290-20,272 (8,750-9,195) J. Deere PowerTech PWX 4045 19,599-20,624 (8,890-9,355) J. Deere PowerTech PWX 4045 30,225-31,240 (13,710-14,170) J. Deere PowerTech PVX 6068 34,377-37,595 (15,593-17,053) J. Deere PowerTech PVX 6068 42,499-47,705 (19,295-21,684) J. Deere PowerTech PVX 6068 48,906 (22,183) J. Deere PowerTech PVX 6068 56,361-59,255 (25,565-26,877) Liebherr D936-L A6 58,462 (26,518) Liebherr D936-L A6 77,843 (35,309) Liebherr D946-L A6 80,967 (36,726) Liebherr D946-L A6 34,000 (15,422) J. Deere PowerTech Plus 6068H

LIEBHERR

s Crawler Loader LR 624 LR 634 Dozers PR 724 PR 736 PR 746 PR 756 PR 764

Engine Power hp (kw)

KOMATSU Weight lbs. (kg)

Engine Power hp (kw)

TD7R TD8R TD9R TD10R TD14M LGP TD14M LT TD15M LT WAY TD15M LGP 6M 20 TD TD25M TD40E LL TD15M LANDFI LL FI ND LA M TD20 LL TD25M LANDFI

74 (55) 85 (63) 93 (69) 101 (75) 160 (119) 160 (119) 190 (141) 190 (141) 240 (179) 330 (246) 515 (384) 190 (141) 240 (179) 330 (246)

Weight lbs. (kg) ) 19,032 (8,633 ) 19,572 (8,878 ) 94 ,6 (9 72 ,3 21 ) 21,813 (9,894 9) 40,849 (18,52 4) 38,699 (17,55 3) 16 3, (2 65 51,0 9) 48,874 (22,16 6) 63,681 (28,88 2) 86 2, (4 94 ,4 94 4) 154,351 (70,01 0) 53,461 (24,25 1) 67,197 (30,48 2) 28 3, (4 18 ,4 95

Model

Engine Type

) (16,894-18,549 37,245-40,893 94) ,6 22 674 0, (2 45,737-50,032 ) (16,659-18,024 36,729-39,738 00) ,6 24 020 161 (120) 0, (2 44,530-54,230 201 (150) 8,900-30,800) ,710-67,900 (2 63 ) 248 (185 8,300-41,150) (3 0 ,430-90,72 336 (250) 84 90-116,150 (44,220-52,685) ,4 416 (310) 97

141 (105) 173 (129)

DRESSTA Model

650L LGP 650L LT 650L WT 750M LGP 750M WT 750M LT 850M LGP 850M WT 850M LT 1150M LGP 1150M WT 1150M LT 1650M LGP 1650M WT 1650M XLT 2050M LGP 2050M WT 2050M XLT 2050M LT

J. Deere PowerTech PWX 4.5 L J. Deere PowerTech PVX 6068 J. Deere PowerTech PVX 6068

see CHART page 40

Model

D 934 S A6 D 934 L A6 D 934 L A6 D 934 A7 D 936 A7 D 946 A7 D 9508 A7A7

Engine Type N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

Engine Power hp (kw) 74 (55) 74 (55) 74 (55) 92 (66) 92 (66) 92 (66) 112 (84) 112 (84) 112 (84) 127 (95) 127 (95) 127 (95) 150 (112) 150 (112) 150 (112) 214 (160) 214 (160) 214 (160) 214 (160)

Engine Power hp (kw)

Weight lbs. (kg)

17,550 (7,959) 16,250 (7,370) 16,800 (7,619) 21,180 (9,607) 20,679 (9,379) 20,040 (9,089) 22,830 (10,355) 22,330 (10,129) 21,560 (9,779) 32,637 (14,804) 32,174 (14,594) 31,134 (14,122) 39,550 (17,939) 38,650 (17,531) 37,750 (17,123) 48,773 (22,123) 46,891 (21,269) 45,414 (20,599) 44,563 (20,213)

Weight lbs. (kg)

Engine Type CASE 445TA/EG7a Tier III CASE 445TA/EG7a Tier III CASE 445TA/EG7a Tier III CASE F5HFL413J Tier IV Interim CASE F5HFL413J Tier IV Interim CASE F5HFL413J Tier IV Interim CASE F4HFE413P Tier IV Interim CASE F4HFE413P Tier IV Interim CASE F4HFE413P Tier IV Interim CASE F4HFE613F Tier IV Interim CASE F4HFE613F Tier IV Interim CASE F4HFE613F Tier IV Interim CASE F4HFE6132 Tier IV Interim CASE F4HFE6132 Tier IV Interim CASE F4HFE6132 Tier IV Interim CASE F4HFE613W Tier IV Interim CASE F4HFE613W Tier IV Interim CASE F4HFE613W Tier IV Interim CASE F4HFE613W Tier IV Interim

Engine Type

D95LE-6 Komatsu SAA4 (78) 5 10 D95LE-6 ) Komatsu SAA4 20,749 (9,410 8) (7 5 10 D95LE-6 23 A4 X) D39E Komatsu SA 20,922 (9,510 5 (78) 10 D95LE-6 A4 SA su ) D39EXi-23 Komat ,675 (9,830 21 8) (7 5 10 107E-1 6D ) D39PX-23 Komatsu SA 21,848 (9,931 0 (97) 13 107E-1 3 6D -2 Xi SA 9P D3 Komatsu 81(12,446) ,3 27 7) (9 0 13 D107E-2 8) D51EXi-22 Komatsu SAA6 29,057 (13,20 ) 25 (1 8 16 2 D107E-2 -2 A6 5) D51PXi Komatsu SA 39,099 (17,73 (125) 8 16 D107E-2 23 A6 XSA 1E su D6 Komat ,441 (17,890) 39 ) 25 (1 8 16 D107E-2 3 0) D61EXi-2 Komatsu SAA6 41,138 (18,66 25) (1 8 16 D114E-5 23 A6 XSA D61P Komatsu 81 (18,770) ,3 41 ) 53 (1 5 20 D114E-5 0) D61PXi-23 Komatsu SAA6 44,355 (20,12 ) 53 (1 5 20 D114E-5 17 A6 0) D65EXKomatsu SA 45,945 (20,84 (153) 5 20 D114E-5 17 A6 XSA 5W D6 Komatsu ,335 (21,470) 47 ) 53 (1 5 20 D114E-5 ) D65PX-17 Komatsu SAA6 48,865 (22165 53) (1 5 H 20 W D114E-5 17 A6 X3) D65E Komatsu SA 54,835 (24,87 5 (153) 20 D125E-5 A6 SA su 5) D65WX-17 WH Komat 51,268 (23,22 ) 97 (1 4 H 26 W D125E-5 17 0) D65PXKomatsu SAA6 61,950 (28,10 (197) 4 26 E0 D125E-5 15 A6 XSA 5E D8 Komatsu 60 (27,650) ,9 60 ) 97 (1 4 26 D140E-6 4) D85PX-15E0 Komatsu SAA6 62,245 (28,23 ) 64 (2 4 SL 35 E0 D140E-6 15 A6 0) D85EXKomatsu SA 87,100 (39,50 (264) 4 35 D140E-7 -7 A6 AX SA 55 su D1 Komat ,515 (41,510) 91 ) 64 (2 4 H 35 W D140E-5 0) D155AX-7 Komatsu SAA6 89,300 (40,50 35) (3 9 44 D140E-5 -8 A6 AX SA D155 Komatsu 0 (51,530) 60 3, ) 11 35 (3 9 44 170E-5 6) D275AX-5E0 Komatsu SA6D ) 116,528 (52,85 55 (4 SL 0 140E-3 61 E0 2V -5 0) D275AX Komatsu SDA1 157,940 (71,64 (664 ) 0 140E-3 89 2V 6 A1 A75 SD ) D3 Komatsu 8,960 (108,390 ) 23 64 (6 0 89 0 00) D475A-5E 249,560 (113,2 D475ASD-5E0

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • November 1, 2014 • Page 39

Like all of our equipment, the 850K was designed with extensive input by owners and operators like you. We listened and responded with numerous K-Series enhancements, including additional power and weight for increased productivity. An EPA Interim Tier 4 diesel engine for work in nonattainment areas. Spacious redesigned cab that’s noticeably quieter and more comfortable. And best-inclass serviceability features, such as an innovative easy-toclean “V-Cool” package. Add to those, the unsurpassed operating ease and maneuverability operators have come to expect from our crawlers, and the 850K is an obvious choice. To get your hands on one, see your John Deere dealer.

IT’S GOT YOUR FINGERPRINTS

ALL OVER IT.

RDO EQUIPMENT CO.

PAPE MACHINERY

HONNEN EQUIPMENT CO.

4 RIVERS EQUIPMENT

www.rdoequipment.com

www.papemachinery.com

www.honnen.com

www.4riversequipment.com

Flagstaff Lakeside 5500 East Penstock Ave 10108 Riverford Road Flagstaff, AZ 86004 Lakeside, CA 92040 928-526-0639 619-270-4300 Phoenix 2649 N 29 Ave Phoenix, AZ 85009 602-415-4700

Riverside 20 Iowa Avenue Riverside, CA 92507 951-778-3700

Prescott 1091 Commerce Drive Prescott, AZ 86035 928-776-8300

Indio 83-300 Avenue 45 Indio, CA 92201 760-342-8900

Tucson 5051 S Outlet Center Drive Tucson, AZ 85706 520-294-5262

Imperial 3275 Hwy 86 Imperial, CA 92251 760-355-4331

Irving 3230 East Airport Freeway Irving, TX 75062 972-438-4699

Pflugerville 16415 N IH-35 Pflugerville, TX 78660 512-272-4141

Fort Worth 5301 Mark IV Parkway Fort Worth, TX 76131 817-566-1541

New Braunfels 19275 N IH-35 New Braunfels, TX 78132 830-632-3100

Hewitt 215 Enterprise Blvd Hewitt, TX 76673 254-666-3900

Laredo 102 Wilcox Road Laredo, TX 78043 956-718-1909

Rohnert Park 800-325-9401 707-584-9161 Fax: 707-584-4786

5055 E. 72nd Ave. Commerce City, CO 303-287-7506 800-646-6636

Sacramento 800-227-3399 916-922-7181 Fax: 916-922-4532

Gilroy 800-848-4150 408-848-4150 Fax: 408-848-5163

Durango, CO 970-247-4460

French Camp 800-619-6319 209-983-8122 Fax: 209-983-1105

Redding 530-241-4555 Fax: 530-241-0619

Newark 800-231-2060 510-790-3600 Fax: 510-790-9120

Fowler 559-834-4774 Fax: 559-834-4754

Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441

St. George, UT 435-652-8003 Casper, WY 307-266-4474 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915

Albuquerque, NM 2301 Candelaria Rd. NE 505-884-2900

Fort Collins, CO 125 John Deere Dr. 970-482-7154

Colorado Springs, CO 1100 E. Cheyenne Rd. 719-475-1100

Frederick, CO 3763 Monarch St. 303-833-5900

El Paso, TX 11323 Rojas Drive 915-598-1133

Hobbs, NM 2400 W. Bender Blvd. 575-392-6923

Farmington, NM 1100 Troy King Rd. 505-326-1101

Pueblo West, CO 685 Enterprise Drive 719-547-3505

Page 40 • November 1, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

38 CHART from page

TD. CATERPILLAR CON CATERPILLAR Model

Engine Power hp (kw)

Crawler Dozers LGP 80 (60) D3K2 LGP 92 (68) D4K2 LGP 104 (78) D5K2 LGP 125 (93) D6K LGP 130 (97) D6K2 LGP 150 (112) D6N DS-LGP 150 (112) D6N DS-LGP (Tier IVi) 150 (112) r D6N DS-LGP waste handle IVi)150 (112) r (Tie r dle D6N DS-LGP waste han Medium Crawler Dozers D6T LGP D6T LGP waste handler D7E LGP D7E LGP waste handler D8T LGP D8T LGP waste handler

LGP 205 (152.9) 205 (152.9) 235 (175.2) 235 (175.2) 310 (231.2) 310 (231.2)

Weight lbs. (kg) 18,525 (8,403) 18,761 (8,510) 21,266 (9,646) 29,690 (13,467) 30,574 (13,868) 39,112 (17,741) 39,646 (17,983) 42,454 (19,257) 19,499 (8,845)

49,489 (22,447) 54,791 (24,852) 62,886 (28,524) 68,123 (30,900) 87,733 (39,795) 91,270 (41,399)

Engine Type

Cat C4.4 ACERT Cat C4.4 ACERT Cat C4.4 ACERT Cat C6.6 ACERT Cat C6.6 ACERT C6.6 ACERT Cat C6.6 ACERT Cat C6.6 ACERT Cat C6.6 ACERT

Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C15 ACERT Cat C15 ACERT

Model

Engine Power hp (kw)

Weight lbs. (kg)

Engine Type

Crawler Dozers Non LGP 17,544 (7,958) 80 (60) D3K2 XL 18,080 (8,201) 92 (69) D4K2 XL 20,534 (9,314) ) (78 104 D5K2 XL 28,409 (12,886) 125 (93) D6K XL 29,346 (13,311) ) (97 130 D6K2 XL 36,392 (16,507) 150 (112) D6N DS-XL 36.392 (16,507) 2) (11 150 D6N XL Tier IVi 38,224 (17,338) 150 (112) D6N XL Waste Handler 38,224 (17,338) 2) (11 IVi 150 D6N XL Waste Handler Tier 46,263 (20,985) 207 (154) D6T XL (Tier IVF) 51,563 (23,389) 4) (15 r IVF) 207 D6T XL Waste Handler (Tie 48,034 (21,788) 207 (154) D6T XW (Tier IVF) 57,441 (26,055) 5) (17 235 D7E 63,537 (28,820) 235 (175) D7E Waste Handler 87,733 (39,795) 1) (23 310 D8T 85,650 (38,850) 310 (231) D8T Waste Handler 94,265 (42,758) 6) (30 410 D9T 109,705 (49,761) 410 (306) D9T Waste Handler 146,499 (66,451) 3) (43 580 D10T 144,986 (65,765) 580 (433) D10T Waste Handler 208,589 (94,614) 4) (63 850 D11T 220,385 (99,965) 850 (634) D11T CD 139,010 (63,054) 7) (44 600 D10T2 95,917 (43,507) 436 (325) D9T (Tier IV Final) ,471 (50,109) 110 5) (32 436 IVF) D9T Waste Handler (Tier

Cat C4.4 ACERT Cat C4.4 ACERT Cat C4.4 ACERT Cat C6.6 ACERT Cat C6.6 ACERT Cat C6.6 ACERT Cat C6.6 ACERT Cat C6.6 ACERT Cat C6.6 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C15 ACERT Cat C15 ACERT Cat C18 ACERT Cat C18 ACERT Cat C27 ACERT Cat C27 ACERT Cat C32 ACERT Cat C32 ACERT Cat C27 ACERT Cat C18 ACERT Cat C18 ACERT

VISTA Training Offers New PC-Based Bulldozer Simulator VISTA Training, a leading provider of training materials for earthmoving, excavating and mining applications, has a new PCbased bulldozer simulator from Simlog. This instructionally-designed simulation software puts trainees at the controls of a medium-sized bulldozer at work in a typical construction site. Seven simulation modules are structured to train entry-level operators on basic operation and core skills. Lessons begin with controls familiarization and progress to more complex tasks, including bulldozer positioning, using the blade to control the path of a boulder, using the blade to backfill a trench, slot dozing and spreading. “This new dozer simulator is the perfect complement to VISTA’s dozer training programs,” said VISTA Training President Rick Longstaff. “By using them together, fleet owners can provide comprehensive yet costeffective training to their operator candidates.” Replica controls are available for the bulldozer simulator. They offer a realistic training experience and can be ordered with tabletop mounting brackets. For added realism, a bulldozer operator chair also is available with an authentic operator seat and industrial controllers mounted on consoles

execution time, machine collisions and criteria related to how well a trench is excavated and backfilled. This data can be used to provide diagnostic coaching to trainees, to help them overcome weak spots in their skills. The bulldozer is the latest in a line-up of 11 heavy equipment simulators.

Seven simulation modules are structured to train entry-level operators on basic operation and core skills.

for the left and right hands. The operator chair can be easily reconfigured for use with other Simlog simulators. The operation of the bulldozer simulator can be customized to simulate the behavior of a wide variety of machines. For example, it can be configured to use separate foot pedals for the decelerator and brake, or just a

single pedal that combines both functions. Blade speed also can be adjusted. As trainees perform tasks in the simulator, the software records data about key performance indicators that measure how quickly and carefully the simulated work is performed. The simulator tracks more than 20 performance indicators, including task

About VISTA Training VISTA Training Inc., founded in 1991, provides training solutions for people involved in earthmoving, excavating and mining applications. More than 10,000 customers use VISTA products and services to provide equipment safety, skills and productivity training to employees. Headquartered in Waterford, Wisc., with a Canadian branch near the oil sands mining operations of northern Alberta, Canada, VISTA provides the mining and construction industries with a variety of computer-based training modules, videos, DVDs and instructor kits, on-site equipment operator training and cost effective, PC-based equipment simulators supplied by Simlog. For more information, visit www.vistatraining.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • November 1, 2014 • Page 41

Komatsu America Corp. Launches D65-18 Crawler Dozer Komatsu America Corp.’s D65EX/PX/WX-18 crawler dozers are powered by a more powerful net 217 hp Komatsu SAA6D114E-6 engine that is EPA Tier IV Final emissions certified. A standard (EX), low ground pressure (PX) and a wide (WX) track model are available to offer customers flotation and weight distribution options that best match their applications. Operating weight ranges from 45,525 to 49,690 lbs. (20,649 to 25,539 kg) depending on the version. The D65-18 combines the SIGMADOZER blade with an automatic transmission with torque converter lock-up to achieve increased productivity and fuel economy. A Komatsu 6-way power angle tilt (PAT) blade also is available for all models. The D65-18 is equipped with the latest KOMTRAX remote monitoring technology with data access via the web or via KOMTRAX Mobile on your smart phone. In addition to providing data such as fuel levels, operating hours, location, cautions and maintenance alerts, KOMTRAX has been further enhanced to monitor AdBlue/DEF levels, ambient air temperatures and pressures. A new operator identification system reports key operating information for multiple operators. A new auto idle shutdown function helps improve operating costs by reducing unnecessary idle time. Special features of these new crawler dozers include: Komatsu EPA Tier IV Final Emission Certified Engine — Productive, Dependable, Efficient Komatsu’s EPA Tier IV Final engines are built on the strength of its Tier IV Interim foundation. By integrating selective catalyst reduction (SCR), the Tier IV Final engine further reduces NOx emissions using AdBlue/DEF. The Komatsu Tier IV Final engine uses an advanced electronic control system to manage the air-flow rate, fuel injection, combustion parameters, and after treatment functions to optimize performance, reduce emissions, and provide advanced diagnostic capability. The result is lower fuel consumption with no loss of performance. Komatsu continues to use a Komatsu variable geometry turbocharger (KVGT) and an exhaust gas recirculation (EGR) valve for more precise temperature and air management control as well as longer component life. To ensure product reliability and durability in demanding conditions, Komatsu developed the entire system, including the control software which is critical to the effective operation of the aftertreatment system. This control system also is integrated into the machine’s on-board diagnostics systems and KOMTRAX, Komatsu’s standard telematics system.

Diverse Choice of Blades for Versatility and Performance The D65EX and WX are equipped with SIGMADOZER, providing the machine with a large blade capacity of 7.34 and 7.72 cu. yds. (5.6 and 5.9 cu m) respectively. Based on a completely new excavation theory, SIGMADOZER dramatically improves dozing performance and increases productivity by up to 15 percent over conventional semi-u blades. The Komatsu designed blade increases soil-holding capacity while simultaneously reducing sideway spillage because it digs and rolls material up at the center of the blade. SIGMADOZER also reduces digging resistance producing a smoother flow of material enabling the dozing of larger amounts of soil with less power, according to the manufacturer. A durable pat blade also is available for each model. The manually adjustable blade pitch further expands the versatility and productivity in many applications. Automatic Shift Transmission Improves Fuel Economy The D65-18 has a new automatic transmission with lock up torque converter that reduces fuel consumption and offers greater power train efficiency. The lockup mechanics of the torque converter automatically transfer engine power directly to the transmission, reducing fuel consumption by up to 10 percent. Two gearshift modes — automatic or manual — can be easily selected to fit the appropriate application: automatic for all general dozing and manual for dozing and ripping rough ground. E and P modes help match machine performance to the application. E mode is chosen for all general dozing, leveling and spreading applications providing adequate speed and power while saving up to 10 percent fuel usage. P mode is chosen for heavier applications where engine power has priority over fuel consumption.

Ergonomic Joystick Controls for Ease of Operation and Comfort Komatsu’s palm command control system (PCCS) gives operators maximum control, offering a relaxed posture and superb fine control to minimize operator fatigue. The pilot controlled hydraulic blade and ripper control joystick offer excellent blade and ripper fine control. Powerful turns under various work conditions are achieved with the hydrostatic steering system (HSS) to transmit power to both tracks without interruption. Counter-rotation is available in neutral for minimum turning radius, providing excellent maneuverability Cab Design Creates Optimal Operator Environment The crawler dozer’s comfortable cab allows the operator to concentrate on the work at hand for increased productivity. The large cab is integrated with ROPS and includes a standard air suspension seat with heat. The cab provides a noticeably quiet work environment with viscous cab mounts. A large 7 in. high-resolution color LCD monitor in the cab displays all machine information. A comfortable standard air suspension seat with heat further enhances operator comfort. A rear-view monitoring system is standard and can be set to synchronize with reverse operation.

Convenient Maintenance and Reduced Operation Costs Recognizing that maintenance is critical for successful equipment uptime, Komatsu has designed the D65-18 with easy routine maintenance in mind. Daily engine checks are grouped at the left-hand side of the engine compartment. A manually reversing fan allows for quick cleaning of the radiator. The D65-18 also comes standard with the parallel link undercarriage system (PLUS). This rotary bushing system doubles the undercarriage life compared to prior conventional systems, significantly lowering owning and operating costs. All Komatsu Tier IV machines come with Komatsu Care. Komatsu Care provides complimentary scheduled maintenance for the first three years or 2,000 hours (whichever occurs first.) It also includes a 50-point inspection at each service and two complimentary KDPF exchanges in the first five years. For more information, visit www.komatsuamerica.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The D65-18 combines the SIGMADOZER blade with an automatic transmission with torque converter lockup to achieve increased productivity and fuel economy.

Page 42 • November 1, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

Cat 824K Dozer Delivers Productivity With Durability The Cat 824K wheel dozer builds on the solid performance of predecessor models with engineering refinements in its power train, operator station and structures, and in features that enhance safety, serviceability and machine management. With a net power rating of 405 hp (302 kW) and a maximum operating weight of 74,966 lbs. (34,004 kg), the 824K is available with six blade configurations ranging in capacity from 6.6 to 21.1 cu. yds. (5.0 to 16.2 cu m) to customize it for production dozing, stockpile dozing or cleanup work. The Cat C15 ACERT engine features an electronically controlled fuel delivery system, an engine idle shutdown system to conserve fuel by limiting idling time, and a delayed shutdown feature to ensure that the engine is not stopped until operating temperatures have stabilized. Drive train efficiency, fuel economy, and travel speeds are further enhanced with the lock-up clutch in the Cat torque converter, a feature that reduces both drive train power losses and system heat. Two engine options are available that meet

A Cat 824K wheel dozer dumping material onto a pile.

A primary focus for the 824K design is operator convenience and safety, such as providing lighted, shallow-angle stairways for entering and exiting the cab and designing the STIC armrest to fold away for added room when entering or leaving the seat. either U.S. EPA Tier IV Final/EU Stage IV emission standards or U.S. EPA Tier III/EU Stage IIIA equivalent emission standards. For further drive train efficiency, the smooth-shifting, electronically controlled, 4F/4R Cat power shift transmission can be set by the operator to automatically upshift or downshift based on machine speed. In addition, the single clutch speed shifting controls allow the 824K to carry momentum through range shifts for high productivity and fuel savings. Both operating efficiency and operator convenience get a boost with the left foot pedal, which serves as an engine decelerator, transmission neutralizer and brake, depending on the degree of application. As a decelerator, the left pedal allows the operator to temporarily reduce engine speed by overriding the throttle lock setting when maneuvering around obstacles. Additionally, a new

fuel tank provides minimum 12 hours operation, depending on the application. An optional tire pressure monitoring system provides real time information to the operator in the cab, ensuring proper inflation and optimizing tire life. The STIC (steering and transmission integrated control) system allows single-lever steering and transmission control. Simple side-to-side movements of the STIC lever provide up to 43 degrees of steering articulation in both directions for precise maneuverability, and buttons on the lever provide fingertip control of directional and range shifting. Operator Environment A primary focus for the 824K design is operator convenience and safety, such as providing lighted, shallow-angle stairways for entering and exiting the cab and design-

ing the STIC armrest to fold away for added room when entering or leaving the seat. Also, the Cat Comfort Series air-suspension seat features extra thick cushions and moves both the attached electro-hydraulic STICcontrol pod and electro-hydraulic implement-control pod when adjusted. The cab, isolation-mounted to the frame, is pressurized with filtered air, and the selected temperature is maintained automatically. The control panel uses large, backlit switches with LED indicators, and a simple twoposition rocker switch controls the parking brake. An optional rearview camera with incab monitor increases operator awareness. Serviceability and Machine Management To promote the safety of personnel servicing the 824K, routine maintenance points are grouped and accessible from ground level or from non-skid walkways that are protected with handrails. Swing-out doors on both sides of the engine compartment provide easy access to daily service checks, and ecology drains simplify service and help prevent spills. In addition, a ground level power service center has electrical disconnect, emergency engine shutdown and stairway light switches. To further complement serviceability, the Cat vital information system, VIMS 3G,

integrated into the 824K design keeps operators informed about machine operating conditions via a graphic display that features a touch-screen interface. To expand machine monitoring capability, the Cat Product Link system provides event and diagnostic codes, as well as data such as operating hours, fuel level and idle time. This information is transmitted to a secure web-based application, VisionLink, which can convey information to machine owners and dealers, including working time versus idle time and mapping functions. Durable Structures The 824K design integrates massive, purpose-built structures and heavy-duty components that can support multiple rebuilds. The new dozer features a full box-section rear frame designed to resist twisting forces and shock encountered in heavy dozing. Steering cylinder mounts are designed to effectively dissipate steering loads into the frame, and axle mounts are heavy duty components that contribute to the overall structural integrity. This robust design results in significant cost savings and sustained optimum performance over the life cycle of the 824K. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • November 1, 2014 • Page 43

Page 44 • November 1, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

Liebherr’s Newly Designed Generation 6 Offers Reduced Fuel Consumption Liebherr’s Generation 6 PR 736 dozer has an operating weight between 44,000 and 55,000 lb. (20,000 and 25,000 kg) and has been newly designed for increased efficiency and for reduced fuel consumption and CO2 emissions. This model features an electronically-regulated travel drive with an integral eco-function. When the operator chooses between high-performance potential and maximum economy, the system automatically selects the optimal setting for economical operation of all travel-drive components. Proactive power control is another Generation 6 innovation. Travel drive settings adjust automatically when the operator selects a different level of speed by the joystick, which prepares the power train for higher performance demands. In addition to fast response, this new dozer offers increased performance potential. To simplify the use of automatic machine control systems, Liebherr supplies pre-installation kits for leading manufacturers’ systems. The automatic machine control system provides the operator with accurate guidance in order to maintain consistent grading quality. Like all Liebherr dozers and loaders, the PR 736 features a hydrostatic transmission. This efficient driveline keeps the engine speed at a constant level of performance. Power train components and Liebherr’s intuitive engine management system match perfectly in order to achieve high efficiency and lower fuel consumption, according to the manufacturer. The new PR 736 is equipped with several features that expedite and simplify service procedures. These include centrally located maintenance points, access flaps and engine compartment doors that open to a wide angle. The machine’s tilting cab is standard, and an optional radiator that can be swung out for cleaning is available. The new PR 736 has long maintenance intervals for operating fluids. Depending on the nature of the work, and provided that regular quality checks are being performed, the hydraulic fluid interval can be as long as 8,000 hours of operation. The standard Liebherr fleet management system LiDAT provides an accurate, efficient overview of essential servicing work, warning messages, the

WAUKESHA-PEARCE INDUSTRIES, INC. 12320 S. Main Houston, TX 77035 713-723-1050 Fax: 713-551-0798 Tomball, TX 281-351-9016 Kilgore, TX 903-984-2011 Port Arthur, TX 409-721-5305 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 San Antonio, TX 210-648-4444 Pflugerville, TX 512-251-0013 Buffalo, TX 903-322-7150 www.wpi.com

Liebherr’s Generation 6 PR 736 dozer has an operating weight between 44,000 and 55,000 lb. (20,000 and 25,000 kg).

machine’s position and actual consumption data and filling levels. Depending on the customer needs, the data is updated several times a day and can be retrieved when needed by means of a web browser. An automatic alarm function also can be selected in the event of a machine leaving its predetermined zone or if a critical operating situation arises. Extended Track Life, High Comfort in Operation The track assemblies for Generation 6 dozers also have been redesigned. In order to extend the operating life of the track and the sprocket, the drive sprockets are now of larger diameter with more teeth in mesh. When operating in abrasive surfaces, optional track assemblies with rotary bushings are available. In addition to being 100 percent exchangeable, they prolong the replacement intervals for this specific type of work. With its downward-angled body panel edges and panoramic windows that include the door area, the PR 736 provides the operator with a complete view of the machine’s working attachments and the surrounding terrain. The exhaust system is entirely concealed by the A-post so that the operator’s view is unobstructed. Increased visibility allows for more efficient machine operation and promotes safety. The PR 736’s operator cab has been

newly designed. The operator can move the ergonomically-shaped travel controls to the most convenient position. An integral contact switch in the comfortable seat identifies the operator’s presence automatically without the need for a safety lever to be engaged. The desired travel speed can be preselected with without shifting gears. The speed can be saved in the memory when direct selection is needed. The PR 736 is equipped standard with a touch-controlled display. The touch screen is the interface for the new control structure for modular construction. Additional options such as reversing cameras can be incorporated on this screen, as well as functions designed for further comfort such as air conditioning control. The PR 736 can be equipped with alternative operator interfaces, with an inching brake pedal or different control levers. High-performance LEDs illuminate the work area effectively, even in unfavorable conditions. The modular lighting concept is integrated into the PR 736’s redesigned bodywork and can be chosen specifically to suit the applications that the machine will perform. For more information, visit www.Liebherr.us. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

KOMATSU EQUIPMENT COMPANY 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557 3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334 6253 West Gilbert Industrial Court Hurricane, UT 84737 435-986-1000 10790 South Highway 59 Gillette, WY 82718 307-682-1445 405 Jonah Drive Rock Springs, WY 82901 307-686-1300

Construction Equipment Guide â&#x20AC;¢ Crawler Loaders, Dozers, Undercarriages & Parts Section â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ November 1, 2014 â&#x20AC;¢ Page 45

KIRBY-SMITH MACHINERY INC. 6715 W Reno Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065

DOZERS From Komatsu â&#x20AC;&#x201C; The Dozer Experts

Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000 www.kirby-smith.com

POWER MOTIVE CORPORATION DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 888-271-3308 Colorado Springs, CO 888-271-3308 Grand Junction, CO 888-271-3308 Milliken, CO 888-271-3308 Durango, CO 888-271-3308

0VS % % % BOE % %P[FST HJWF ZPV UIF SFMJBCJMJUZ BOE WFSTBUJMJUZ ZPV FYQFDU GSPN UIF EP[FS FYQFSUT BU ,PNBUTV 5IFTF UP IPSTFQPXFS NBDIJOFT IBWF UIF GFBUVSFT ZPV OFFE UP DPNQMFUF ZPVS KPCT PO UJNF BOE PO CVEHFU t )ZESPTUBUJD 5SBOTNJTTJPO )45 GPS TVQFSC BDDVSBDZ BOE TNPPUI DPOUSPM t &YDFMMFOU CMBEF WJTJCJMJUZ UIBU NJOJNJ[FT PQFSBUPS HVFTTXPSL BOE SFEVDFT DZDMF UJNFT t "MM EBJMZ NBJOUFOBODF QPJOUT DFOUSBMJ[FE JO POF MPDBUJPO GPS DPOWFOJFOU BDDFTT

Cheyenne, WY 888-271-3308 www.powermotivecorp.com

XXX LPNBUTVBNFSJDB DPN X XX LPNBUTVBNFSJDB DPN

Page 46 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Use Ground Heaters for Concrete to Properly Cure

The 48-year-old dual-bridge replacement near Bozeman, Mont., was originally scheduled to be completed in two phases. BRIDGE from page 1

so much that we could finish both phases in one season,” said Allen Frankl, project manager of Dick Anderson Construction of Bozeman, Mont. “In 2014 we did some sidewalk work, seeding and grading; things we couldn’t finish in the last season of 2013. We also had to put in some joint sealant and do some slope protection. “The whole project was accelerated. We started on March 11, 2013, and by July 23, 2013, we opened the first half of the bridge,” Frankl said. “Crews worked six days a week and 16-hour days to accelerate the construction so we were able to finish the first phase and get the bridge open, which was the most critical part.” The 7th Avenue dual-bridge along I-90 in West Bozeman was replaced with one single bridge that includes four driving lanes, two in each direction, two lefthand-turn lanes onto the I-90 westbound on-ramp, a raised median, 5-ft. (1.5 m) sidewalks and 10-ft. (3 m) shoulders on each side of the bridge to accommodate bicycles and pedestrians. It also is ADA accessible, in conjunction with the Bozeman Area Transportation Plan. “This really was a great project and we’re proud of what the crews could accomplish. The State of Montana was a great partner on the project. They made some great decisions and went above and beyond while working with us,” Frankl said. Lori Ryan, communications

specialist of the Montana Department of Transportation, explained that each phase involved detouring traffic, removing the old structure, and placing half of the new structure. The original interchange consisted of two adjacent two-lane bridges. One bridge was demolished and two-way traffic was maintained on the other existing structure. Half of the new structure was constructed that was wide enough to handle three-lanes of traffic during Phase 2. Phase 1 also including adding a lane to the westbound ramp. Phase 1 included the removal of the northbound structure, the east bridge, which crosses I-90, and handling two lanes of North 7th Avenue traffic on the existing southbound structure while half of the new bridge was being built. Phase 2 included shifting traffic to the new half of the structure that handled three lanes of North 7th Avenue traffic while the existing southbound structure, the west bridge, was removed and replaced with the other half of the new structure, information from the Montana Department of Transportation said. Bridge removal was accomplished by using a specialized subcontractor who was able to demolish and drop the bridge onto the Interstate below with a cushion of sand for protection, Ryan added. The rubble and sand cushion was then removed in one operation. Using this method, the bridge was demolished overnight.

But finishing both phases in one season was no easy task. “Most everything on the project was as was anticipated and the state did a good job of letting us know what to anticipate,” Frankl said. But one of the biggest things that no one anticipated was that when we placed the second half of the bridge deck in late November that we would have 30-below zero temperatures to deal with. We thought it would get down to zero but it reached 28-below for about 10 days. “The cold temperatures made it difficult to keep the deck warm enough to allow proper concrete curing,” Frankl added. “We used three glycol loop-fed ground heaters and we covered the deck with the heater hoses and quadruple covered them. We also had monitors spread out over the deck and we had to move the monitors around to make sure there were no cold spots. We also had to clean off the bottom of the deck to keep air movement down so if a truck went under the deck it didn’t move warm air out and replace it with cold air.” A wide array of excavators with 330 and 355 demo hammers and numerous forklifts and graders were used to excavate 25,821 cu. yd. (19,741 cu m) of excavation backfill. A 125-ton (113 t) Lorain crane and a 100-ton (90.7 t) Manitowoc crane could be seen on site along with an 830 diesel impact hammer for driving the see BRIDGE page 65

Bridge removal was accomplished by using a specialized subcontractor who was able to demolish and drop the bridge onto the Interstate below with a cushion of sand for protection.

Phase 1 included the removal of the northbound structure, the east bridge, which crosses I-90, and handling two lanes of North 7th Avenue traffic on the existing southbound structure while half of the new bridge was being built.

Phase 2 included shifting traffic to the new half of the structure that handled three lanes of North 7th Avenue traffic while the existing southbound structure, the west bridge, was removed and replaced with the other half of the new structure.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 47

Southcoast Bobcat

Pape Material Handling

Mission Valley Tractor & Equipment

4 Rivers Equipment

Bobcat of the Rockies

Orange, CA 714-998-5445

Seattle, WA 206-760-4300

San Jose, CA 888-284-7471

Colorado Springs, CO 800-364-3029

Cheyenne, WY 307-635-1978

Page 48 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer:

Buford, GA Battle Creek, MI 678.318.9500 269.965.1269 Forest Park, GA Byron Center, MI Contact your local dealer: 770.319.0074 616.878.7450 Savannah, Kentwood, POWER MI ROMCO GA EQUIPMENT EQUIPMENT CO. 912.964.8079 616.698.2960 www.romco.com COMPANY Lansing, MI Asheville, NC www.power-equip.com 5151 Cash Road 517.272.5033 828.687.0620 Dallas, TX 75247 500 E. 62nd Ave. 214-819-4100 Muskegon, MI Denver, CO 80216 Charlotte, NC Fax: 214-819-4102 303-288-6801 231.798.8754 704.596.8283 Fax: 303-288-6809 Austin New Hudson, MI Greenville, NC Blvd. 1150 Old W. Settlers 2329 River Road 248.356.5200 Round Rock, TX 75681 Grand Junction, CO 81505 252.754.5280 512-388-2529 970-243-0722 Romulus, MI Raleigh, NC 877-851-1026 Fax: 970-243-0726 Fax: 512-388-1781 734.641.8238 919.661.8710 2940 E. Las Vegas St. Saginaw, MI CO Buffalo Bismarck, ND Colorado Springs, 7387 Hwy. 164 80906 989.752.9400 701.250.4882 Buffalo, TX 75831 719-392-1155 903-322-5602 Sterling Hts, MI Fax: 719-390-9604 Fargo, ND Fax: 903-322-5605 586.977.6000 701.271.2360 8806 E. US Hwy. 34 Carmine Johnstown, CO Traverse, MI 80534 Minot, NDHwy. 290 West 17391 US 970-669-6209 Carmine, TX 78932 231.943.3700 701.250.4882 Fax: 970-669-6280 979-278-3570 Wixom, MI Fax: 979-278-3573 Charleston, SC 248.449.6700 Dallas 843.414.1120 ARNOLD 3900 Halifax Wixom, MI SC Dallas, TX 75247 MACHINERY CO. Columbia, (Cons. Division) 214-819-4100 www.arnoldmachinery.com 803.791.0740 800-227-6626 248.356.5200 2975 West 2100 South Piedmont, SC Fax: 214-819-4102 Salt Lake City, Zeeland, MI UT 84119 864.704.1060 Ft. Worth 801-972-4000 616.748.4108 1350 N. E. Loop 820 Fax: 801-975-9434 Chattanooga, TN Ft. Worth, TX 76106 817-626-2288 3330 N. Yellowstone Hwy. 423.308.7940 866-966-4602 Idaho Falls, ID 83401 Knoxville, TN Fax: 817-626-8983 208-523-0822 Fax: 208-523-9918 865.525.1845 Houston 300 East Overland Rd. Meridian, ID 83642 208-887-6000 Fax: 208-887-6013

McALLISTER

EQUIPMENT CO. 464 Washington St. South Twin Falls, ID 83301 208-733-1715 Alsip, IL Fax: 208-734-6924

708.389.7700 1650 East Greg IL St. East Peoria, Sparks, NV 89431 309.694.4455 775-356-1511 Fax: 775-356-0517 Rockford, IL 4136 Donovan Way 815.227.0555 Las Vegas, NV 89030 Springfield, 702-642-9000 IL Fax: 702-642-8808 217.789.0351 4323 East Winslow Villa Park, IL Ave. Phoenix, AZ 85040 630.530.7600 602-414-1900 Fax: 602-414-1904 3350 East Gas Rd. Tucson, AZ 85714 520-294-7677 Fax: 520-294-7670

8450 Breen Dr. Houston, TX 77064 713-937-3005 800-865-6998 Fax: 713-937-7541 Longview 2116 E. Loop 281

Evansville, IN75605 Longview, TX 903-758-5576 812.867.6661 Fax: 903-758-3079 Fort Wayne, IN Rio Grande Valley 260.482.3681 312 Park St. Mercedes, TX 78570 Indianapolis, 956-565-0100 IN Fax: 956-565-1765 317.247.9125 Corbin, KY San Antonio 1042 S. E. Loop 410 606.528.9440 San Antonio, TX 78220 210-648-4600 Louisville, KY 800-966-4601 502.456.4050 Fax: 210-648-1282 Prestonsburg, KY ROL Remote Oilfield 606.874.2104 Location 3610 Interstate 37 St. Louis, MO Three Rivers, TX 78071 361-254-2317 314.487.8925

YOU CHOSE GUARANTEED* FUEL EFFICIENCY WITH EXCEPTIONAL DEALER SUPPORT.

Smart Works. * Ask about our Fuel Efficiency Guarantee by contacting a Volvo dealer near you, or visit volvoce.com/NAFuel to learn more.

Volvo Construction Equipment

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ November 1, 2014 â&#x20AC;˘ Page 49

Stop in and see our complete line of John Deere E-Series Skid Steers, and 204K, 304K, and 244J Compact Loaders. Each comes standard with quiet heated cabs that keep winter on the outside while delivering vir tually unobstructed visibilit y from the inside. And all can be equipped with our Worksite Proâ&#x201E;˘ buckets, angle brooms, and snow pushers, blades, and blowers. Best of all, we provide a wealth of resources to NHHS \RX UXQQLQJ DW SHDN HI Ć&#x;FLHQF\ IRU \HDUV WR FRPH Ĺ LQFOXGLQJ GHSHQGDEOH SDU WV VXSSRU W IDFWRU \ WUDLQHG WHFKQLFLDQV DQG FXVWRPL]HG Ć&#x;QDQFLDO VHU YLFHV $VN IRU D GHPR WRGD\

RDO EQUIPMENT CO.

YELLOWHOUSE MACHINERY CO.

4 RIVERS EQUIPMENT

www.rdoequipment.com

www.yellowhouse.us

www.4riversequipment.com

Irving, TX 972/438-4699 Fort Worth, TX 817/566-1541 Hewitt, TX 254/666-3900 Pflugerville, TX 512/272-4141 New Braunfels, TX 830/632-3100

Laredo, TX 956/718-1909 Flagstaff, AZ 928/526-0639 Phoenix, AZ 602/415-4700 Prescott, AZ 928/776-8300 Tucson, AZ 520/294-5262

Lakeside, CA 619/370-4300 Riverside, CA 951/778-3700 Indio, CA 760/342-8900 Imperial, CA 760/355-4331

PO Box 31388 Amarillo TX 79120 806/335-1681 806/335-3932 Fax Lubbock TX 806/763-0473 Odessa TX 432/580-3337 Abilene TX 325/677-2291

San Angelo TX 325/651-3337 Wichita Falls, TX 940/322-3337 Enid OK 580/233-5000 Tulsa OK 918/245-5926 McAlester OK 918/423-2555

Albuquerque, NM 2301 Candelaria Rd. NE 505/884-2900 Colorado Springs, CO 1100 E. Cheyenne Rd. 719/475-1100 El Paso, TX 11323 Rojas Drive 915/598-1133

Farmington, NM 1100 Troy King Rd. 505/326-1101 Fort Collins, CO 125 John Deere Dr. 970/482-7154 Frederick, CO 3763 Monarch St. 303/833-5900

Hobbs, NM 2400 W. Bender Blvd. 575/392-6923 Pueblo West, CO 685 E. Enterprise Dr. 710/547-3505

Page 50 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Venture Drilling Supply... DOES YOUR NEXT

ATTACHMENT COME OUT ON TOP? Bobcat® attachments are built to do more and last longer while standing up to your toughest jobs. More than 15 videos prove it. Visit Bobcat.com/Top11 to see the differences.

Bobcat.com/Top11

Authorized Bobcat Dealers

CALIFORNIA

Bobcat of Corpus Christi

Bobcat of Cerritos, Inc.

Corpus Christi

Pearland

361-884-3959 • 888-356-3139

713-413-2200

www.valleyditchwitch.com

www.bobcatofhouston.com

Bobcat of Dallas

Bobcat of San Antonio

Cerritos 562-926-2342 www.bobcatofcerritos.com

COLORADO Severson Supply Co. Inc.

Fort Worth

San Antonio

817-654-2202

210-337-6136

Lewisville

www.qualityequipmentco.net

Craig

469-586-0000 • 866-981-0905

970-824-9481

Longview

www.seversonsupply.com

OKLAHOMA White Star Machinery Tulsa 918-622-7787 www.whitestarmachinery.com

TEXAS

Bobcat of Houston

Ledwell Machinery Texarkana

903-758-5547

903-838-6531

www.bobcatofdallas.com

www.ledwellmachinery.com

Bobcat of Harlingen Harlingen 956-425-4300 www.valleyditchwitch.com

Bobcat of Houston Conroe

Bobcat of Austin

936-890-6790

Austin

Jersey Village

512-251-3415

281-477-8648 • 888-661-4669

www.qualityequipmentco.net

www.bobcatofhouston.com

UTAH Intermountain Bobcat West Valley City 801-262-0208 • 888-550-3640 www.imbobcat.com

Doosan Expands With New Dealer in Georgetown, Texas Doosan has expanded its dealer network with the addition of Venture Drilling Supply as an authorized sales, parts, service and rental provider of Doosan equipment. The dealership is located at 1150 County Road 155, Georgetown, Texas. In 1983, Venture Drilling Supply was established in Tahlequah, Okla., by Wayne McCarthy. At the time, McCarthy owned and operated a drilling company and saw a need to provide professional sales and service of quality construction equipment to customers. The company takes pride in helping its customers sustain their own operations with integrity and honesty. In the 30 years since its founding, the family owned and operated company has grown to include locations in Oklahoma and Texas. In late 2012, Venture Drilling Supply explored the idea of expanding its product line. After meeting with Doosan, Venture realized the magnitude of its opportunity with the company. “We saw a company that was first and foremost committed to the distributors’ and end users’ demands, as well as being highly motivated to grow market share,” said Colt McCarthy, vice president of operations and co-owner. “Not only is Doosan ambitious and supportive, but they also have developed high quality equipment that will hold its own against any brand in the industry,” he added. “From that point on Venture was all in.” It then became evident that if the company wanted to become a key player in the central Texas equipment market, it would need to establish a more local presence. After extensive research the company decided on a new service and sales facility in the heart of “equipment row,” in north Austin. Venture is committed to bringing integrity and service to its new central Texas location, according to the company. Venture believes its new and existing customers will benefit from Doosan equipment’s affordability and reliability. “(Doosan’s) reliability allows operators to meet their goals, and their comfortable ergonomics means less fatigue and higher productivity,” McCarthy added. Venture Drilling Supply serves customers in the aggregate, utility, recycling and demolition markets, as well as contractors and municipalities. The dealership will distribute Doosan heavy excavators, wheel excavators, wheel loaders, mini excavators and articulated dump trucks throughout central Texas and the city of Austin. For more information, call 888/953-7455 or visit venturedrillingsupply.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 51

4 RIVERS EQUIPMENT www.4 riversequipment.com Albuquerque, NM • (505) 884-2900 El Paso, TX • (915) 598-1133 Farmington, NM • (505) 326-1101

N OT I M I TAT I O N .

Hobbs, NM • (575) 392-6923

320-259-6222 OCT EQUIPMENT www.octequipment.com Clinton, OK • 580-323-3422 Oklahoma City, OK • 405-789-6812 • 800-375-2273 Tulsa, OK • 918-437-5085 • 800-375-1628

POWER EQUIPMENT COMPANY www.power-equip.com 500 E. 62nd Ave. • Denver, CO 80216 303-288-6801 • Fax: 303-288-6809 Grand Junction, CO • 970-243-0722 Colorado Springs, CO • 719-392-1155 Greeley, CO • 970-669-6209

ROMCO EQUIPMENT CO. www.romco.com Austin, TX • (512) 388-2529 • (877) 851-1026 Buffalo, TX • (903) 322-5602 Carmine, TX • (979) 278-3570 Dallas, TX • (214) 819-4100 • (800) 227-6626 Ft. Worth, TX • (817) 626-2288 • (866) 966-4602 Houston, TX • (713) 937-3005 • (800) 865-6998 At Hitachi, we don’t copycat out-of-date, lackluster excavator technology. By focusing on excavators, we’re able to engineer and build them 100% for excavating. More advanced. More reliable. More productive.

THAT’S ALL.

Longview, TX • (903) 758-5576 Rio Grande Valley, TX • (956) 565-0100 San Antonio, TX • (210) 648-4600 • (800) 966-4601 ROL Remote Oilfield Location Three Rivers, TX • (361) 254-2317

hitachiconstruction.com

Page 52 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 53

APCO Equipment Corp. 3432 N. 5th Street North Las Vegas, NV 89032 702-871-7474 Fax: 702-368-0871 www.apcoequipment.com

We’ve got you covered

Williston, ND 701-248-8080

A-Z Equipment Rentals & Sales www.a-zequipment.com East Valley/Gilbert 1313 E. Baseline Rd. Gilbert, AZ 85233 480-539-8700 North Phoenix 602-992-1150 West Valley 623-925-0200 Central Phoenix 602-955-5100

Rifle Equipment, Inc. 1605 Airport Rd. Rifle, CO 81650 970-625-2580 TF: 866-427-7970 www.rifleequipment.com

e t i s job gh tou

Barnsco, Inc. 2609 Willowbrook Rd. P.O. Box 541087 Dallas, TX 75220 214-352-9091 Hutto, TX 512-354-4970 Fort Worth, TX 817-740-2400 Walled Lake, MI 248-668-1010 www.barnsco.com

Scan for Free Demo

Page 54 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Looking for power? Hyundai machines come standard with the industry’s best warranty. That’s the power of reliability, the key to your long-term success. Learn more at hceamericas.com.

CALL FOR DEMO AND PRICING CALIFORNIA

NEW MEXICO

TEXAS

MecoM equipMent www.mecomequipment.com Stockton, CA 209-466-5135

ciSco FoRD equipMent www.cisco-eq.com Artesia, NM 575-748-1314

ciSco FoRD equipMent www.cisco-eq.com 520 SE Loop 338 Odessa, TX 79762 432-550-9181 Fax: 432-367-9335 Lubbock, TX 806-745-9595 San Angelo, TX 325-653-2121

HeAVY equipMent SALeS Corona, CA 951-674-9999 Pacoima, CA 818-834-0102

WASHINGTON FouR SeASonS equipMent Dallas, TX 214-388-1700 Houston, TX 281-807-9777

Jet citY equipMent Oak Harbor, WA 360-675-4441 North Seattle, WA 360-651-9079 Wenatchee, WA 509-888-8181

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 55

Construction Unemployment Officials Urge Funding of HTF Falls to 7 Percent; Lowest in Years FUND from page 1

JOBS from page 1

Construction employment totaled 6 million in September, the highest total since May 2009, with a 12-month gain of 230,000 jobs or 3.9 percent, Sandherr noted. Residential building and specialty trade contractors added a combined 11,800 employees since August and 129,400 (5.9 percent) over 12 months. Nonresidential building and specialty trade contractors hired a net of 3,700 workers for the month and 100,300 (2.7 percent) since September 2013. However, heavy and civil engineering contractors, which perform the majority of public-sector construction, increased their headcount by only 500 in September and 29,000 (3.3 percent) over the year amid tight government budget conditions. The number of workers who said they looked for work in the past month and had last worked in construction fell to 604,000 in September. The last time the number of unemployed construction workers dropped that low was August 2007, a time when the

construction industry was struggling with widespread construction worker shortages that prompted project delays and increased costs, Sandherr cautioned. Association officials said many firms cite the lack of local, secondary-level vocational programs as one of the causes for the worker shortages. As a result, association officials continued to urge federal, state and local officials to enact the series of measures the association identified in its Workforce Development Plan that will make it easier for school districts, local associations and private firms to establish career and technical education and training programs. “Labor shortages happen when a growing industry meets a stagnant pool of qualified workers,” said Sandherr. “It is time to align our education and training systems with current economic conditions so more young people can benefit from the rebound in construction demand.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

add transportation funding back to an already-long list of self-created crises threatening our economic vitality.” Coalition officials noted that in July, despite overall partisan gridlock, Congress overwhelmingly extended authorization for the surface transportation program and enacted a temporary funding patch for the Highway Trust Fund (HTF). That patch ensures federal highway, bridge and transit investments will continue through next May. However, it was the fifth time in the past seven years Congress took that approach, requiring nearly $65 billion in supplemental funding to avoid significant cuts to transportation investments. On average, the HTF provides 52 percent of the funding for highway and bridge capital investments made by the nation’s state transportation departments each year, Coalition officials added. “Congress needs to ‘keep the horse before the cart’ and address the trust fund’s longterm revenue problem as was done in the 1997 and 2004 tax bills. Then it can develop and properly fund a six-year program bill early in 2015,” TCC Co-chair Pete Ruane, president and CEO of the American Road & Transportation Builders Association, said.

“And ‘status-quo’ funding levels would simply perpetuate worsening traffic congestion and the inadequate physical condition of the nation’s highway and transit network.” The latest Congressional Budget Office projections indicate Congress will need to identify an additional $7 billion just to preserve highway and transit funding for the last four months of fiscal year 2015. Federal data also show maintaining current program funding beyond 2015 will require an average of $16 billion in additional revenues each year. That, Coalition officials point out, is the revenue equivalent of a 10-cent increase in the federal gas tax. Despite widespread desire for a multiyear federal surface transportation program reauthorization bill to boost economic competitiveness and job creation, such legislation cannot move forward until a long-term transportation funding solution is in place. Coalition officials are urging Congress to identify and pass a funding HTF revenue fix to ensure Americans and the U.S. economy continue to benefit from a world class transportation network.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Holt CAT Names New Senior Director of Public Affairs Holt CAT, the Caterpillar equipment and engine dealer of south, central, north and north east Texas, has named Jim Campbell as senior director of public affairs. Campbell has been involved in governmental affairs and strategic communications for more than 25 years. In his new role, he will support the company in fostering longterm and strategic relations with Holt’s constituencies to positively impact and advance the company’s vision and core values. Prior to joining Holt, Campbell worked in the private sector managing the public affairs function for The DeBerry Group, a local public relations and marketing firm in San Antonio. At The DeBerry Group, he provided consultant services in legislative and regulatory advocacy, crisis communications, media relations, community affairs and corporate communications. Campbell also previously worked as the director of external relations of the city of San Antonio and CPS Energy. He also has served as the senior legislative assistant for U.S. Congressman Jim Chapman, and as the

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

Jim Campbell

chief of staff of Texas State Rep. Tom Ramsey. Campbell is active in the San Antonio Chamber of Commerce, having served on the Executive Committee and chaired the Public Affairs Steering Committee in 2013. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

Page 56 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states.....................................................................Call

Summit Supply LLC 888-888-1248 • sales@summittracks.us 21-22 TM

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 21-23 DH Call McLaren 888-492-4230

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. 21-23 DH Call McLaren 888-492-4230

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 21-23 DH Call McLaren 888-492-4230

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

CLASSIFIEDS AIR COMPRESSORS Compressors Airman PDS185, CFM Compressor, Quiet, Efficient, Durable, good condition, 1950 hours ..........................$10,500. 480-695-0672

ASPHALT EQUIPMENT Asphalt Cutters Attachments International ASPHALT CUTTERS SEVERE SERVICE HIGH SPEED ASPHALT CUTTER Skid Steers, TLB, Loaders, Excavators 14 Models Available

Call 218-863-6444 www.attachmentsintl.com www.attachmentsusa.com

Asphalt - Misc.

Hydraulic Excavators

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 Toll Free 1-800/523-2200 Mini Excavators 2006 JCB 8080, 18,000 lb. mini excavator w/ dozer blade, includes bucket, good condition, 2,300 hours ........$43,900.

2006 Allmand TLB 6235, 4WD, 33 HP, good condition, 1220 hours ................$19,995.

MATERIAL HANDLERS

480-695-0672

Material Handlers

Skid Steer Loaders

1999 Liebherr A932HD, S/N 5316, Material-Scrap Handler, Good condition, 17,968 hrs...... ................................$125,000.

2007 Dynapac PL2000, 80 in., front loading planer, good condition, 3,000 hrs. ......$139,500.

2007 Doosan DX420, S/N 5119, Excavator with shear hydraulics, Good condition, 5,943 hours ..............$120,000.

847-437-8686

440-439-4000

Generators & Gen Sets

2008 JCB JZ140, zero tail swing excavator, includes bucket, good condition, 2,500 hours ..........................$73,500.

440-439-4000

COMPACTION EQUIP.

TRAILERS

MMD AMSDG-25S, 20KW Generator, Towable 3 phase Diesel 25KW, good condition, 4,000 hours ..................$9,750.

2012 JCB 260, Cab, heat, 2speed, foot throttle, general purpose bucket, very good condition, 200 hours ........$33,000.

Dump Trailers

480-695-0672

847-437-8686

Compaction - Misc. 2007 JCB Vibromax VM115D, 80'', 25,000 lb. w/ pad foot & dozer blade, very good condition, 350 hours ..........$77,900. 2007 Dynapac CA134, 54'', 12,200 lb. single drum roller, excellent condition, 300 hours ..................................$43,500.

''24-48 hour shipping'' SPECIAL PRICING!

EXCAVATORS

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

847-437-8686

847-437-8686 GENERATORS & GEN SETS

2011 Terex TSV70 with cold weather cab, bucket, forks and grapple bucket for additional cost. Good condition, 195 hours ..........................$46,000.

440-439-4000

Felling 6x12 Dump Trailer, 6000 lb. capacity, 5hp Honda engine, good condition $6,500.

2007 JCB JS260, 60,000 lb. excavator includes bucket and quick coupler, good condition, 1,375 hours ..............$139,900.

LOADERS

Wheel Loaders

Backhoe Loaders

2005 JCB JS220, 50,000 lb. excavator includes bucket, quick coupler and thumb, good condition, 2,600 hrs ..$88,900.

CAT IT938 Wheel Loader, S/N IBS00524, Fair condition, 18,240 hours ..............$50,000.

2008 JCB 3CX-15, 15 ft. backhoe w/ extendable dipper, backhoe bucket included, very good condition, 1,700 hours .... ..................................$55,000.

2008 JCB 426HT, 2.5 yd. wheel loader, 2.5 yd. bkt, good cond, 1,000 hours ....$115,000.

Wylie Express 500 Water Trailer, 500 gallon, 4hp Honda engine, tandem surge brakes, good condition..............$5,700.

847-437-8686

480-695-0672

440-439-4000

480-695-0672

Trailers - Misc.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 57

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted LOOKING TO BUY USED CATERPILLAR WHEEL LOADERS 920, 926, 930, 936, 938F/G, 950B/C/E/F, 966C/D/E/F/H, 980C/F AND 988B. PLEASE SEND ME PICTURES, SERIAL NUMBER, CONDITION, LOCATION AND FINAL OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:INFO@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– PM WB60 + IMT 24562 | UNMOUNTED KNUCKLE CRANE CONTACT: MOHSEN PHONE: 966566972242 EMAIL: MOHSENKH@HOTMAIL.COM –––––––––––––––––––––––––––––––– CAT 966,D,E,F; 970F; 972F,G; 980C,F; D8R; D9L, D9N; D9R; 14G,H | CAT LOADER: 930; 936E; 950C,B,E; 966C,D,E,F; 970F; 972F,G; 980C,F | CAT DOZER: D8R; D9L; D9N; D9R | GRADER: 14G,H. CONTACT: MOSTAFA ELEMAM PHONE: 281-581-2111 FAX: 281-581-2117 EMAIL: MOSTAFA@ELEMAMMACHINERY.COM –––––––––––––––––––––––––––––––– BACK HOLD CONTACT: CARL CUMMINGS PHONE: 912 384-7120 EMAIL: CARLCUMMINGS@JUNO.COM –––––––––––––––––––––––––––––––– TAILGATE FOR A TA30 GEN 7 HAUL TRUCK | TAILGATE CONTACT: CAREN BUNCE PHONE: 860-824-5536 FAX: 860-824-4139 EMAIL:CFBRN@AOL.COM –––––––––––––––––––––––––––––––– CAT WHEEL LOADERS CAT 950B, CAT 950E. MACHINES MUST BE LOCATED IN US/AUSTRALIA OR CANADA. CONTACT: IKRAM ULLAH KHAN PHONE: +92-333-5555-360 EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– DRESSER BUCKET, QUICK COUPLER, ATTACHMENTS FOR IH 530 CONTACT: HARRY PHONE: 905 403 0788 EMAIL: HARRY@MALIBUINT.COM –––––––––––––––––––––––––––––––– SCHWING BOOM PUMPS | SCHWING CONCRETE PUMP BOOMS 32M -39M MOUNTED ON MACK TRUCKS 94 & NEWER CONTACT: WILLIAM CROSS PHONE: 407 595 8221 FAX: 407 843 0136 EMAIL:WILLIAM@CROSSPUMPING.COM –––––––––––––––––––––––––––––––– USED CATERPILLAR WHEEL EXCAVATOR - CAT 140M CAT M316D 329DL BETWEEN 2012 TO 2014 I CAN GIVE THE MOST MONEY USD $250,000 CONTACT: IBRAHIM EMAIL: USEDBULLDOZERBUYSELLER@AOL.COM –––––––––––––––––––––––––––––––– LANDFILL COMPACTORS CONTACT: MARK OR JOHN PHONE: 519-686-1123 EMAIL: SALES@MARCELEQUIPMENT.COM ––––––––––––––––––––––––––––––––

EAGLE 1000CC OR 1200CC PORTABLE CRUSHING PLANT CONTACT: JOE PHONE: 724 944-5569 EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– USED GRADALL 4100 OR EQUIVALENT 2005 OR NEWER - CALL FOR SPECS CONTACT: BRANCH COUNTY ROAD COMMISSION PHONE: 517-278-2022 FAX: 517-278-6126 EMAIL: BCRCPIERSON@CBPU.COM –––––––––––––––––––––––––––––––– I NEED TO BUY CUMMINS KT19 GENSET. CONTACT: IKRAM KHAN PHONE: +92-333-555-5360 EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– LOOKING FOR WELDING TRUCK CONTACT: JOSE PHONE: 347 3516853 EMAIL: JOSELGUARNEROS3@GMAIL.COM –––––––––––––––––––––––––––––––– USED KUBOTA 92SV SKID STEER IN GOOD SHAPE CONTACT: GLENN, SIEVE CONSTRUCTION PHONE: 507-227-3780 FAX: 507-736-2199 EMAIL:WWW.GSIEVE@FRONTIERNET.NET –––––––––––––––––––––––––––––––– LOOKING TO BUY CATERPILLAR WHEEL LOADER 930 BETWEEN 1980 TO 1984 CONTACT: MOHAMED PHONE: 253-232-6772 EMAIL: MERCY1100@HOTMAIL.COM –––––––––––––––––––––––––––––––– WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, NOT INCLUDING TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. CALL OR EMAIL. CONTACT: GRACE FRANCES PHONE: 2708492270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– PILE HAMMERS | LOOKING TO BUY CLAMSHELL BUCKETS, GRAPPLES, PILE HAMMERS, WINCHES, HOISTS, CRANES & HOOK BLOCKS. CONTACT: GREG PHONE: 724-228-5560 EMAIL: NEEQUIPDIST@AOL.COM –––––––––––––––––––––––––––––––– TERRAMITE T5C USED 1990 THRU 2000, PLEASE CONTACT E MAIL ONLY CONTACT: C.B. BARKER PHONE: 910 564 4931 FAX: NONE EMAIL: EDINA@INTRSTAR.NET ––––––––––––––––––––––––––––––––

PILE HAMMERS | LOOKING FOR USED VIBRATORY AND DIESEL HAMMERS APE _ ICE _ J&M CONTACT: WILLIE EMAIL: WILLIE@PILEMAN.COM –––––––––––––––––––––––––––––––– IT DD70, IR DD25, AND DEERE 410 2004 AND UP | IR DD70, IR DD25, AND DEERE 410 2004 AND UP BOBCAT S185 2010 BOBCAT 325 BOBCAT 323 KOMATSU DOZERS PLEASE EMAIL ME ALL INFO CONTACT: MANSOOR MOLAI PHONE: +16303799175 EMAIL:MANSOOR.MOLAI@GMAIL.COM –––––––––––––––––––––––––––––––– WE WANT TO BUY CATERPILLAR DOZERS D9N & D9R WITH RIPPERS.PLEASE OFFER US & KINDLY SEND US DETAILS, PICTURES & OFFER GOOD PRICE. CONTACT: FAIZ KHAN PHONE: +92-333-3298751 EMAIL:NAQIB_KHANINTRCO @HOTMAIL.COM –––––––––––––––––––––––––––––––– WE WANT TO BUY CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F.PLEASE OFFER US & KINDLY SEND ME DETAILS, PICTURES & OFFER GOOD PRICE. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– DROP DECK TRAILER | 53X102 DROP DECK AIR RIDE TRAILER CONTACT: JOHN MICHALKO PHONE: 262 889 1372 EMAIL: TRUCKERJOHN54@YAHOO.COM –––––––––––––––––––––––––––––––– TRACTOR CAB | ENCLOSED USED CAB TO FIT IHC 684. CONTACT: RON PHONE: 419-565-5429 EMAIL: MH101SUPER@YAHOO.COM –––––––––––––––––––––––––––––––– VANAIR 80 VIPER | PORTABLE AIR 80 CFM CONTACT: ANDY PHONE: 2316725139 EMAIL: ANDY.BOS42@GMAIL.COM –––––––––––––––––––––––––––––––– COMMERCIAL LAWN MOWER | UNDER 200 HOURS AND A 52 IN SIZE DECK NEEDS TO BE A 2012 OR 2013 CONTACT: A732PATCAN@AOL.COM PHONE: 6315862225 EMAIL: A732PATCAN@AOL.COM –––––––––––––––––––––––––––––––– TRACHOE EMAIL: TODDDEB@ARVIG.NET –––––––––––––––––––––––––––––––– INTERNATIONAL TRI AXLE DUMP PAYSTAR 5000 5600 OR 5900 FROM CONTRACTOR 400 HP OR MORE | TRI AXLE DUMP CLEAN 400 HP OR MORE FROM CONTRACTOR. CONTACT: KEVIN PHONE: 856-692-0027 EMAIL: KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– HYUNDAI 4503 | LINDI FINAL DRIVE CONTACT: WILLIAM RENAUD JR PHONE: 207-384-5111 FAX: 207-384-4809 EMAIL:WMRENAUD@COMCAST.NET ––––––––––––––––––––––––––––––––

WE WANT TO BUY CAT WHEEL LOADER 920, 926E, 936E, 950B, 950E, 966D, 966E, 966F, 970F, 980C, 980F, 988B AND 988F. IF YOU HAVE ANY FOR SALE PLEASE EMAIL US PHOTOS AND DETAILS. CONTACT: RIZ SUNESARA PHONE: 832-528-0786 FAX: 281-727-0415 EMAIL:RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WE ARE LOOKING TO BUY CAT MOTOR GRADER 12G, 140G, 14G, AND 140H IF YOU HAVE ANY FOR SALE PLEASE EMAIL PHOTOS AND DETAILS. CONTACT: STEVE PHONE: 713-659-0593 FAX: 281-727-0415 EMAIL: STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– FIELD STRIPING MACHINE | LOOKING FOR A AIRLESS FIELD STRIPING MACHINE CONTACT: RICK PHONE: 518 369 3296 FAX: 518 371 0296 EMAIL: EAC046@NYCAP.RR.COM –––––––––––––––––––––––––––––––– WANT TO BUY NICE CRAWLER LOADER. LOCATED IN WEST POINT CONTACT: CHARLES TRAMMELL PHONE: 706 645 6704 OR 706 501 9457 EMAIL:CCHARLES_JANICETRAMMELL800@YAHOO.COM –––––––––––––––––––––––––––––––– MINI EXCAVATOR 12000-18000# | I NEED TO PURCHASE A MINI EXCAVATOR FOR MY GROWING BUSINESS. CONTACT: ADAM PHONE: 518-496-5020 EMAIL: SIPENSONS@GMAIL.COM –––––––––––––––––––––––––––––––– OLDER CAT 320 OR CAT 215, CAT 225 | SEEKING AN OLDER MODEL CAT 320 IN THE MID 1990 RANGE OR CAT 215/CAT 225 OLD BUT IN OPERATING CONDITION. ONLY SEEKING ONE UNIT. CONTACT ME VIA EMAIL ONLY WITH PHOTOGRAPHS AND CONDITION INFORMATION. CONTACT: JEFF LAWSON EMAIL: JLAWSON29321@CHARTER.NET –––––––––––––––––––––––––––––––– USED TIGER MOWER EMAIL: MEREDITH967@VERIZON.NET –––––––––––––––––––––––––––––––– AMCO VEBA 105 3S 5TON | NEW OR LIKE NEW CONDITION. TO BE MOUNTED ON A WORKBOAT. CONTACT: ROGER APPLEWHITE PHONE: 228-217-4135 EMAIL: RAPPLE34@CABLEONE.NET –––––––––––––––––––––––––––––––– LOADER FOR MASSEY 390 4WD | SECOND HAND LOADER TO FIT MASSEY 390 4WD CONTACT: RICHARD FITZGERALD PHONE: 00353860437770 EMAIL:RICHARDFITZGERALD3@HOTMAIL.COM –––––––––––––––––––––––––––––––– CAT D6R AND D7R 9903 | WE ARE LOOKING FOR D6R AND D7R 1999-2002. RUNNING CONDITION WITH PICTURES. CONTACT: MICHAEL EMAIL: AMEARTH@HOTMAIL.COM ––––––––––––––––––––––––––––––––

DYNAPAC CA12 AXLE | NEED REAR AXLE FOR DYNAPAC CA12. WOULD PURCHASE ENTIRE NON-RUNNING MACHINE. CONTACT: NEIL PHONE: 320-763-4491 EMAIL: NEIL@AMERIGEN.NET –––––––––––––––––––––––––––––––– D9R | WE LOOKING FOR BULLDOZER D9R AND D9N MANUAL FROM 1988 UP TO 1997 WITH RIPPER SINGLE SHANK CONTACT: OUFI PHONE: 966530185141 FAX: 9660127512024 EMAIL:ALOUFI01@HOTMAIL.COM –––––––––––––––––––––––––––––––– SS RIPPER FOR CAT D9N OR D9R. THE RIPPER CAN BE USED OR REBUILT IF WELL PRICED. CONTACT: TIAGO DONATO PHONE: (305) 909-9743 EMAIL:EQUIPMENTSALES@JAXMACHINERY.COM –––––––––––––––––––––––––––––––– CAT WHEEL LOADERS | WANTED TO BUY CAT WHEEL LOADER 936E, 950B, 950E, 966D, 966F, 970F, 988B, AND 988F IN RUNNING OR NON RUNNING CONDITION IF YOU HAVE FOR SALE PLEASE EMAIL ME PHOTOS AND DETAILS. CONTACT: STEVE PHONE: 713-659-0593 FAX: 281-727-0415 EMAIL:STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– CASE BACKHOE LOADER 580SK, 580L, 580M AND 580SM | I AM LOOKING TO BUY CASE BACKHOE 580SK, 580SL, 580L, 580SL, 580M AND 580SM IN ANY CONDITION IF YOU HAVE FOR SALE PLEASE CONTACT ME. CONTACT: RIZ SUNESARA PHONE: 832-528-0786 FAX: 281-727-0415 EMAIL:RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– PAVER | LOOKING FOR BLAW-KNOX PF 5510 OR PF3200, THE CLOSER TO WASHINGTON STATE, THE BETTER. CONTACT: SANTIAGO SCARZELLA PHONE: 3055064263 EMAIL: SSCARZELLA@GMAIL.COM –––––––––––––––––––––––––––––––– TELESCOPIC FORKLIFT | 4-6 TON TELESCOPIC FORKLIFT DIESEL 12-14M 1999-2002 GOOD CONDITION CONTACT: WILFRED OBENGSACKEY PHONE: 233264495065 EMAIL:SACKSONLOGISTICS@GMAIL.COM –––––––––––––––––––––––––––––––– TERRAMITE BACKHOE, USED | TERRAMITE BACKHOE USED 4X4 DIESEL OR GAS. 2003-4-6 CONTACT: ALAN PHONE: 903-681-2064 EMAIL: COLEYOUNGER76@GMAIL.COM –––––––––––––––––––––––––––––––– DIESEL TANK FOR TOWABLE INGERSOLL RAND AIR COMPRESSOR | THIS IS AN OLD, DETROIT MADE PORTABLE INDUSTRIAL AIR COMPRESSOR THAT YOU TOW TO WORK SITE. NEED REPLACEMENT DIESEL GAS TANK AND COMPANY DOES NOT STOCK PARTS THIS OLD. CONTACT: RJ PHONE: 801-597-7314 EMAIL: RSSMTCH@GMAIL.COM ––––––––––––––––––––––––––––––––

4400 GPM POSITIVE DISPLACEMENT PUMP | SECOND HAND POSITIVE DISPLACEMENT PUMP CAPACITY: 3300 4400 GPM CAPACITY: 750 - 1000 M3/HR PRESSURE: 16 - 20 BAR PRESSURE: 230 - 290 PSI TEMPERATURE: 60 C TEMPERATURE: 140 F VISCOSITY OF MEDIUM: 2115 CP MEDIUM: CRUDE OIL LOCATION OF PLANT: MALAYSIA CONTACT: SYAZWAN ELIAS EMAIL: SYAZE.87@GMAIL.COM –––––––––––––––––––––––––––––––– CAT 950B, CAT 950E | I AM LOOKING FOR CAT WHEEL LOADERS 950E AND 950B, PLEASE FEEL FREE TO CONTACT ME, IF YOU HAVE AVAILABLE OR ANY UP COMING UNIT. REGARDS ROYAL MACHINERY TRADERS CONTACT: ROYAL TRADERS USA. EMAIL:ROYALMACHINERYTRADERS @GMAIL.COM –––––––––––––––––––––––––––––––– NATIONAL CRANE BOOM SECTIONS | LOOKING FOR TELESCOPIC BOOM SECTIONS FOR A 880 SERIES NATIONAL CRANE CONTACT: MIKE ACHTOR PHONE: 847-782-0672 FAX: 847-782-0673 EMAIL:PROCISIONBORING@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– 20 FEET TRAILER WITH 10 TIRES CONTACT: VIJAY PHONE: 9444411691 EMAIL: IE@JRMETALCHENNAI.COM –––––––––––––––––––––––––––––––– CATERPILLARS DOZER D7H AND G | WANTED GOOD USED CATERPILLARS BULLDOZER D7H AND D7G CONTACT: GABRIEL FOTSO PHONE: 2027101655 EMAIL: TOKAMGABI@YAHOO.FR –––––––––––––––––––––––––––––––– 544G MANUAL PEMBERTON QUICK COUPLER | 544G / E MANUAL QUICK COUPLER 544G 20.5 X 25 WHEELS AND TIRES, WILL TRADE FORESTRY TIRES AND WHEELS. CONTACT: MICK PHONE: 352-400-5026 EMAIL: MICK.FIELDS@FIELDCO.BIZ –––––––––––––––––––––––––––––––– BANDIT254/WOODCHUCK | PREFER DIESEL AND GOOD WORKING CONDITION CONTACT: CELIA PHONE: 1(806)665-4274 FAX: 1(806)665-4275 EMAIL:79107CELIAH@GMAIL.COM –––––––––––––––––––––––––––––––– KW DUMP TRUCK CONTACT: JOEL VANDER HEIDEN PHONE: 563-357-6273 EMAIL: JVH@FBCOM.NET –––––––––––––––––––––––––––––––– MUSTANG LOADER BUCKET | I AM LOOKING FOR A USED BUCKET WITH TEETH FOR MY 2003 MUSTANG MTL20 LOADER CONTACT: MIKE IPSAN PHONE: 703-675-3375 EMAIL: MIKEHORIZON@GMAIL.COM ––––––––––––––––––––––––––––––––

Page 58 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944

• Champaign, IL November 11, 2014 • Houston, TX November 12-13, 2014

• Columbus (Delaware), Ohio Sat., November 1, 2014 For: Late Model Construction Equipment & more

• Boise, ID November 14, 2014

• Brooklyn, NY Tues., November 4, 2014 For: Industrial Equipment. Part 1 of 2 day sale.

• Phoenix, AZ November 18, 2014

• Saginaw, MI Wed., November 5, 2014 For: Land Clearing Equipment • Wilkes Barre, PA Wed., November 5, 2014 For: Industrial Equipment. Part 2 of 2 day sale. • Port Huron, MI Thurs., November 6, 2014 For: Major Job Completion • Rochester, NY Fri., November 7, 2014 For: Trucking Company Liquidation • Canastota, NY Sat., November 8, 2014 For: Late Model Construction Equipment & more • Cato (Syracuse), NY Sun., November 9, 2014 For: Buses and Light Construction Equipment • Houston, TX Tues., November 11, 2014 For: Rentals! Late Model Construction & Support Equipment & more • Gary, IN Fri., November 14, 2014 For: Complete Liquidation Concrete & General Contractor • Boston, MA Sat., November 15, 2014 For: Late Model Snow Removal & Construction Equipment • Waterloo, IA Thurs., November 20, 2014 For: Complete Liquidation Earthmoving Equipment • Manassas, VA Fri., November 21, 2014 For: Late Model Construction Equipment and more • Dallas, TX Tues., December 2, 2014 For: Late & Great Rental Fleet Construction Equipment • Atlanta, GA Wed., December 3, 2014 For: Construction Equipment, Support & Trucks • Las Vegas, NV Sat., December 6, 2014 For: Large Rental Return Auction • Odessa, TX Tues., December 9, 2014 For: Rental Fleet Construction Equipment & more • Norwich, Ontario CAN Wed., December 10, 2014 For: Large Late Model Deere Farm Machinery Sale • Atlantic City, NJ Sat., December 20, 2014 For: Late Model Rental Returns • Albany, NY Sat., December 27, 2014 For: Rental Fleet Construction Equipment & more • Kissimmee, FL January 31 – February 8, 2015 For: 22nd Annual Construction Equipment, Trucks & more RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Pittsburgh, PA November 6, 2014 • Albuquerque, NM November 7, 2014

• New Braunfels, TX November 14, 2014

• Tipton, CA November 19, 2014 • East Brunswick, NJ November 20, 2014 • Williston, ND November 20, 2014 • Las Vegas, NV November 21, 2014 • Atlanta, GA December 2, 2014 • Salt Lake City, UT December 2, 2014 • Fort Worth, TX December 3-4, 2014 • Nashville, TN December 9, 2014 • Columbus, OH December 11, 2014 • Manchester, NH December 12, 2014 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., November 8, 2014 For: Heavy Equipment & Commercial Truck Auction • Riverside, CA Sat., November 15, 2014 For: Heavy Equipment & Commercial Truck Auction • Phoenix, AZ Fri., November 21, 2014 For: Heavy Equipment & Commercial Truck Auction • Portland, OR Thurs., December 4, 2014 For: Heavy Equipment & Utility Truck Auction BIG IRON www.bigiron.com 800-937-3558 • ONLINE ONLY November 5, 2014 • ONLINE ONLY November 12, 2014 • ONLINE ONLY November 19, 2014 • ONLINE ONLY November 26, 2014 • ONLINE ONLY December 3, 2014 BLACKMON AUCTIONS, INC. www.blackmonauctions.com 501-352-4703 • Wilburton, OK Wed., November 5, 2014 For: Booth Environmental Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com CAP AUCTIONS www.capauctions.com 888-300-0005

HILCO INDUSTRIAL, LLC www.hilcoind.com 877-37-HILCO

• Bryan, TX Fri., November 21, 2014 For: AG, Truck & Construction Equipment

• ONLINE ONLY Wed., November 5, 2014 For: City of Detroit Major Municipal Auction

CAT AUCTION SERVICES www.catauctions.com 866-750-9432

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

• Las Vegas, NV Fri., November 14, 2014 For: Construction Equipment

• Livingston, NJ Wed., November 12, 2014 For: Complete Liquidation Jogi Construction, Inc.

• Oklahoma City, OK Tues., November 18, 2014 For: Construction Equipment • ONLINE ONLY Wed., November 19, 2014 For: eQuipment Yard • Warner, NH Fri., November 21, 2014 For: Construction Equipment • Denver, CO Thurs., December 4, 2014 For: Construction Equipment • Minneapolis, MN Tues., December 9, 2014 For: Construction Equipment • Lancaster, PA Thurs., December 11, 2014 For: Construction Equipment • ONLINE ONLY Wed., December 17, 2014 For: eQuipment Yard • Kissimmee, FL Fri., February 13, 2015 For: Construction Equipment COCHRAN AUCTIONS www.cochranauctions.com 301-739-0538 • Washington County, MD November 6-8, 2014 For: 3 Day Fall Contractors Regional Equipment/Truck & Trailer Auction DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., December 13, 2014 For: Construction Equipment DEANCO AUCTIONS www.deancoauction.com 601-656-9768 • Philadelphia, MS November 6-7, 2014 For: Huge 2 Day Public Auction

• Conway, AR November 6-7, 2014 For: Estate Auction

EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218

• Van Buren, AR Tues., November 11, 2014 For: Arklahoma Pipeline Auction

• Wills Point, TX November 19-20, 2014 For: 2 Day Auction Event

• Van Buren, AR Thurs., November 13, 2014 For: Cockrum Welding & Fabrication • Oxford, MS Tues., November 18, 2014 For: Deep South Sand & Gravel • Ozark, AR Thurs., December 4, 2014 For: One-Owner Auction

GUINN AUCTION COMPANY www.guinnauctions.com 337-824-0422 • Jennings, LA Sat., November 1, 2014 For: Heavy Construction Equipment & Oilfield Trucks

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., December 5, 2014 For: Heavy Construction Equipment, Truck & Trailer IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • ONLINE ONLY November 6, 2014 • ONLINE ONLY November 13, 2014 • ONLINE ONLY November 19, 2014 JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Brooklyn, MS November 21-22, 2014 For: 2 Day Fall Public Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Kansas City, MO Thurs., November 6, 2014 For: Heavy Equipment • Philadelphia, PA Thurs., November 8, 2014 For: Heavy Equipment • Charlotte, NC Sat., November 13, 2014 For: Heavy Equipment • Portland, OR Thurs., November 20, 2014 For: Heavy Equipment • Rome, NY Sat., November 22, 2014 For: Heavy Equipment • Lansing, MI Thurs., December 6, 2014 • Atlanta, GA Thurs., December 11, 2014 • West Palm Beach, FL Sat., December 13, 2014 MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Kingsport, TN Wed., November 12, 2014 For: Large Dismantled Machines & Major Machine Components

• Pelzer, SC Fri., November 14, 2014 For: Const/Farm Equipment, Trucks, Trailers & more

• Newark, NY Fri., November 7, 2014 For: NYS Office for People With Developmental Disabilities

• Lenoir, NC Wed., November 19, 2014 For: Construction Equipment & Related items

• Thiells, NY Thurs., November 13, 2014 For: NYS Office for People With Developmental Disabilities

MOTLEY’S AUCTION GROUP www.motleys.com 804-232-3300 • Richmond, VA Thurs., November 13, 2014 For: Construction Equipment & Trucks NUTT AUCTION COMPANY www.nuttauction.com 903-748-4400 • Texarkana, AR Sat., November 22, 2014 For: Retirement Auction PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • South Windsor, CT Fri., November 7, 2014 For: Complete Dispersal – Folsom Construction, LLC • South Windsor, CT Sat., November 8, 2014 For: Complete Dispersal – Folsom J&H Slater Construction Co. • Plaistow, NH November 14-15, 2014 For: Complete Dispersal – S&R Construction Enterprises • Bristol, CT Fri., December 5, 2014 For: Major Equipment Liquidation • North Franklin, CT December 19-20, 2014 For: Major Public Auction – Area Contractors & Equipment Dealers PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., November 6, 2014 For: Construction Equipment • ONLINE ONLY Tues., November 18, 2014 For: Truck & Trailer Auction • ONLINE ONLY Thurs., November 20, 2014 For: Construction Equipment RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., December 13, 2014 For: Construction Equipment ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668 • Denver, CO Wed., November 12, 2014 For: Heavy Construction & Contracting Equipment SCOTT PERRY & CO. www.scottperryco.com 716-283-7653 • Pittsford, NY Wed., November 5, 2014 For: NYS Dept. of Transportation

• Bear Mountain, NY Fri., November 14, 2014 For: NYS Office of Parks & Recreation • Stony Brook, NY Tues., November 18, 2014 For: Research and Development • Central Islip, NY Wed., November 19, 2014 For: NYS Dept. of Transportation • West Babylon, NY Thurs., November 20, 2014 For: NYS Office of Parks & Recreation • Poughkeepsie, NY Fri., November 21, 2014 For: NYS Dept. of Transportation SHETRON AUCTIONS www.shetronequipment.com 717-532-8828 • Shippensburg, PA Fri., December 19, 2014 For: Construction & Farm Equipment STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • ONLINE ONLY November 5-12, 2014 For: November Monthly Auction • Osceola, WI November 17-25, 2014 For: Frontier AG & Turf Inventory • West Fargo, ND Wed., December 3, 2014 For: Agron West Fargo Event • Montevideo, MN Tues., December 9, 2014 For: Kibble Equipment Late Model Equipment Auction • ONLINE ONLY December 3-10, 2014 For: December Monthly Auction • ONLINE ONLY December 8-16, 2014 For: 2 Day Dealer Realignment Auction STOREY’S www.storeys.ca 519-641-2844 • London, ON November 4-5, 2014 For: 2 Day Major Public Heavy Equipment, Trucks, Scrap, Real Estate, etc. UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., December 19, 2014 For: Construction, Utility & Forestry Equipment WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-5700 • Princeton, MN Sat., December 6, 2014 For: Heavy Equipment

• Batavia, NY Thurs., November 6, 2014 For: NYS Police – Troop “A”

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990

• Canandaigua, NY Thurs., November 6, 2014 For: NYS Police – Troop “E”

• Kissimmee, FL February 9-16, 2015 For: 41st Annual – 7 day Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 59

The new way to buy used equipment Low, no-haggle pricing. Inspected. Ready for work. Guaranteed.

2005 JLG 460SJ 4WD Diesel T elescopic elesco Boom Lift – $18,900 Telescopic

2006 Komatsu FG25T FG25T-16 T-16 -16 Pneumatic Tir re e Forklift Fo – $9,000 Tire

BUY ONLINE

2007 Case 580M Series 2 4x4 Backhoe Loader – $33,900

2005 JLG 3246ES Electric Scissor Lift – $7,750

2007 Bobcat 335G Mini Excavator – $22,500

2007 Skytrak 6042 T elehandler – $24,500 Telehandler

2003 Bobcat S185 Skid-Steer Loader – $14,500

Equipment featured are a representation of items available on allEquip. Items are sold and added to inventory daily.

Visit Visit allEquip.com or call 855-827 855-827-1515 -1515

Page 60 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WCA Hosts Liquidation Sale at Perris, Calif., Facility

n Oct. 16, Western Construction Auctioneers held a complete liquidation auction at its Perris, Calif., facility, which is located at 2021 Goetz Rd, Perris, CA 92570. The sale included heavy equipment, trucks and trailers. A large crowd of bidders attended both in-person and online to bid on equipment, which included: nine excavators, 12 dump trucks, four pull trucks, six wheel loaders, nine skid steers, 11 backhoes, eight water trucks, eight motor scrapers and much more. For more information, visit http://www.wca-online.com/.

Art Leone, (R), awaits the sale of his Cat 633D self-loading scraper with his chief mechanic Rick Hacker. Leone owns ATL Engineering & Construction Inc. in Redlands, Calif. Danny Milo of DMC Enterprises, Vista, Calif., admires this John Deere 624J loader.

Gary Hawthorne, managing partner of Hawthorne Toolshed Rental, is interested in this John Deere 326 skid steer.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

An excavating job in Beverly Hills brought Mike Hijazi, owner of Rama Grading in Glendale, Calif., to the auction to bid on this Cat 345C L hydraulic excavator.

Matt Muth, president of Muth Equipment Inc., Murrieta, Calif., plans to bid on this Cat 345C excavator.

Israel Peraza, owner of Astro Roofing in Los Angeles, Calif., checks out a John Deere 710-J loader backhoe.

Jose Alvarez (L) and Paul Horthorn of Hawthorne Toolshed Rentals in Escondido, Calif., inspect a Cat 430E loader backhoe.

B. Angus McIntosh of Southern Cal Equipment views the proceedings from atop a Cat 303 mini-excavator.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 61

Page 62 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BusinessCalendar

offers education and networking opportunities for safety and risk managers, crane and rigging supervisors, lift directors, project managers, and others responsible for managing crane and rigging operations in construction and heavy industry. More than just a lectureTo view our Business Calendar online, style conference, CRC/ICHC offers attendees opportunigo to www.constructionequipmentguide.com. ties for networking in small groups, experiencing hands-on learning, and the chance to visit vendors TRIMBLE DIMENSIONS 2014 IS THE PLACE TO BE IN during exhibit hours. NOVEMBER. REGISTER NOW! Who Attends? Typical attendees include contractors, NOVEMBER 3 thru 5, 2014 LAS VEGAS, engineering firms, various construction user groups, NEVADA unions, and crane and rigging professionals. The conTrimble Dimensions User Conference 2014 is the ference sessions are geared for safety and risk manmust attend conference for industry professionals agers, crane and rigging supervisors, fleet managers, such as yourself. Haven’t attended in the past? Well, and small business owners. here’s what you’ve been missing! To submit a speaker proposal, go to https://maxcap. Over 400 sessions lead by industry experts media.wufoo.eu/forms/crcichc-2014call-for-speakers/. . Pavilion with the latest technology showcased For more information on exhibiting, contact Mark . Unlimited networking opportunities Bridger, mbridger@maxcapmedia.com. . Peer-to-peer collaboration . Professional Development House (PDH) AGC CONVENTION . Hands-on training 96th Annual AGC Convention . Special events – plus more! DATE: March 18-20, 2015 Dimensions 2014 is the place to be in November. PLACE: San Juan, Puerto Rico Discover first-hand how you can transform the way Join us for the Convention!!! Business Suit Optional you work by integrating advanced positioning technol- No one knows the future, but gaining a comprehensive ogy, field and office applications and real time comview of where you are, where you are going and where munications. you need to be can only strengthen the educated deciFor more information, contact: sions construction professionals have to make every www.TrimbleDimensions.com or Email: day. Trimble_Dimensions@Trimble.com. Take the opportunity to step outside, analyze the direction your organization is heading, listen and compare AGC OF MINNESOTA that with other construction professionals and take that CONSTRUCTION FINANCIAL MANAGEMENT CONFER- perspective back to your organization. ENCE As our premier event each year, the AGC Convention NOVEMBER 5 THROUGH 7, 2014 IN LAS VEGAS, and Technology & Construction Solutions Expo is the NEVADA ideal opportunity to see everything AGC can do for you The AGC/CFMA Construction Financial Management and your business. This year’s convention will include Conference will be held on November 5 – 7, 2014 in professional development sessions covering: Las Vegas, Nevada. Get the latest information on: . Workforce Development Construction Market Trends; Financial Accounting . Drones in Construction Standards Board; Surety, Financial, and Credit Markets, . Leadership Change Order and Claims Management; Federal acqui. Risk Management sition regulations; construction taxes; strategies for . Quality Control economic conditions; business real estate manage. Marketing th: ment; ethics and fraud. Register before September 5 . Much More! $780/After September 5th: $860. Conference Details For more information, please contact The Associated are available at http://meetings.agc.org/agc _cfma. General Contractors of America. 703/548-3118 Ohio Aggregates & Industrial Minerals Association General Inquiries: AGC Store Inquiries: 800/242-1767 (OAIMA) Convention.AGC.org OAIMA 2014 Annual Meeting & Trade Show Hilton Columbus Hotel, Easton Town Center, AEM MEDIA SERVICES presents BAUMA CONEXPO Columbus, Ohio AFRICA Dates: November 13-14, 2014 BAUMA CONEXPO AFRICA will be held September 15 Hotel Information: Hilton Columbus Easton to 18, 2015 at the Johannesburg Expo Centre in 3900 Chagrin Drive Johannesburg, South Africa. Columbus, Ohio 43219 The show is owned and organized by the Association Telephone: 614/414-5000 of Equipment Manufacturers (AEM) and Messe Munchen International (MMI). Exhibit space sales are AGC of MINNESOTA now open for Bauma ConExpo Africa 2015. SAVE THE DATES!!! . December 4th – Presidents/Holiday Reception, Companies applying for space by February 12, 2015, will be included in the first round of booth assignments. Minnesota History Center, St. Paul . December 11th – AGC/MnDOT Grading and Base After that date, applications will be accepted on a first come, first served basis. Technology Forum The Minneapolis Boulevard Hotel, Brooklyn Center World-class exhibition in important marketplace . January 15th – 95th Annual meeting, Minneapolis Exhibitors at the last show pointed out the high quality of attendees. The 2015 show venue is the country’s Marriott Southwest, Minnetonka DETAILS of each will be available over the coming largest purpose-built exhibition and events facility, offering a modern space and services. And, show parweeks! ticipants benefit from the global experience and customer service of AEM, organizer of CONEXPOCRC/ICHC 2014 Crane & Rigging Conference / Industrial Crane & Hoist CON/AGG, and MMI, organizer of BAUMA. BAUMA CONEXPO AFRICA has broad-based support from leadConference ing industry groups in Africa and worldwide. After DATES: December 3 – 4, 2014 LOCATION: Hilton Houston Nasa Clear Lake Hotel, 2015, the show goes to a three-year cycle in response to local and international industry input. AEM is show Houston, TX The event will be held adjacent to the Space Center exhibitor contact for the Americas: visit the show webHouston and NASA’s Johnson Space Center. CRC/ICHC site: www.bcafrica.com for more details. Contact AEM (Crane and Rigging Conference/Industrial Crane and at sales@aem.org or by telephone +1-414-298Hoist Conference) is an independent conference which 4150/ toll free U.S. and Canada 800-867-6060.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 63

UNRESERVED PUBLIC UBLIC C AUCT AUCTION TION ION

LAS VEGAS, NV NOVEMBER 14, 2014

HOSTED BY:

Do you have any EQUIPMENT QUESTIONS? Mike Protega Territory Manager - AZ & NV 480.267.6314 John Gray Territory Manager - CA 619.206.4246

© 2014 Caterpillar Caterpillar.. All Rights Reserved. CA CAT, AATT, CATERPILLAR, CATERPILLAR, their respective logos and “Caterpillar YYellow,” ellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

MORE M ORE A AUCTIONS UCTIONS C COMING OMING U UP P-V VISIT ISIT O OUR UR W WEBSITE: EBSITE: W WWW.CATAUCTIONS.COM WW.CATAUCTIONS.COM FFOR OR M MORE ORE INFO INFO CAT CAT AUCTION SERVICES 860 Blue Gentian Road, Suite 100 Eagan, MN 55121

866.980.4934 info@catauctions.com

Follow the new leader leader..® www.catauctions.com www .catauctions.com

Page 64 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 65

RETIREMENT AUCTION! Rowe & Day Construction & Rigging November 22, 2014 • 10:00 AM 3084 East 19th Street • Texarkana, Arkansas 71854

Highlights Carry Deck Cranes: Grove YB 4415, 657 Hrs. Grove YB 4415 , 1955 Hrs. Broderson IC-80-3E, 1434 Hrs Broderson IC-200-2B, 492 Hrs Forklifts: Taylor TE 40-30 Eagle, Diesel, 1729 Hrs Taylor THD 160 Big Red, Diesel, 1452 Hrs Hyster H60XM Diesel Hyster H110XL Hyster X50HM LGP Clark Gas

U Vintage Fooseball Table, Stock T

Extend-a-boom Forklifts: Skytrak 6036 Case 686G Case 688G Construction Equipment: Case 580 Super K Backhoe, 2905 Hrs John Deere 650H Dozer, 1614 Hrs John Deere 160LC Excavator, 1398 Hrs 2011 John Deere Skid Steer 1993 Ford 3230 Tractor Tractor Truck: 1998 Mack CH613, E7- 427 Tractor Truck, W/ Wet Kit, Ford 3230 Tractor w/Loader

Span Built With Pier Table BRIDGE from page 46

1,978 ft. (602.9 m) of 24-in. (61 cm) diameter steel pipe pile for the project, Frankl said. A big row 4800 paver was used on the deck. The project also required cast-in-place reinforced concrete for the substructure, while the superstructure was constructed of 2,024 ft. (616.9 m) of prestressed concrete beams and cast-in-place deck that is reinforced with epoxy coated rebar. Materials needed in the project included 678,353 lbs. (307,695.7 kg) of reinforcing steel, which included black, epoxy and seismic, 2,8803 cu. yd. (22,021 cm) of concrete and 6,891 tons (6,251 t) of asphalt, Ryan said. The new bridge was built with an integral pier table, which is a slim, horizontal cast-inplace concrete section supported on the intermediate pier that the girders frame into at the middle of the bridge, Ryan said. It allows for longer spans and eliminates the usual blocky-looking section supporting the spans that is used in many bridges. It maintains vertical clearance for future interstate widening. Choosing a single-lane bridge vs. the previous two-lane bridge “allows for turn lane storage on the bridge against the median and provided the necessary width for the traffic, bicycle and pedestrian lanes within a ‘foot-

print’ that did not require additional right-ofway,” Ryan said. The project was intended to address seismic vulnerabilities, structural deficiencies, functional obsolescence and traffic safety. The previous bridge had been outgrown and Bozeman needed more traffic capacity, ADA accessibility and bicycle lane capacity, Frankl added. “The old bridges were seismically substandard and the deck was in need of rehab work.” Retrofitting was considered at this bridge location, including widening, but replacement was chosen over retrofit based on a benefit-cost analysis, Ryan said. The geotechnical and structural analyses included a peak ground acceleration for a design event with a 7 percent probability of excellence in 75 years at this location with its Class C soil. Some of the subcontractors on the project include: Knife River Corporation; Poteet Construction Inc.; H & H Earthworks Inc.; Grizzly Steel Inc.; High Mark Construction; Penhall Company; Montana Lines Inc.; Becker Landscaping; and Olson Communications. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Manlift & Sissor Lifts Grove T80 4x4 Manlift, Diesel, 1042 Hrs (4) Up Right 20N Sissor Lifts Trailers: 1996 Clement 20 Yd Dump Trailer 1996 Challenger Witzco 50 Ton Detach Trailer Wells Cargo 20' Enclosed Trailer Gooseneck Trailers and Utility Trailers (2) Box Van Storage Trailers 40'

TERMS: CASH OR CHECK! BANK LETTER REQUIRED BY UNKNOWN BUYERS PAY BY CHECK. 5% BUYERS PREMIUM ON ALL PURCHASES. ONLINE BIDDING @ WWW.BIDSPOTTER.COM

www.NuttAuction.com ONLINE BIDDING THROUGH

John K Nutt TX #11712 AR #1030

903-824-0581 R.W. "Bud" Nutt 903-748-4400

Page 66 • November 1, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com

ANACONDA USA ....................................................................7

HITACHI CONSTRUCTION MACHINERY ............................51

BAIR PRODUCTS INC ..........................................................13

HYUNDAI ................................................................................11

BARGAINS ............................................................................56

HYUNDAI CONSTRUCTION EQUIPMENT ..........................54

BLANCHARD MACHINERY ....................................................6

IRONPLANET ........................................................................59

BLUELINE CONST EQUIP & SERVICES ..............................2

JCB INC ..................................................................................19

BOBCAT COMPANY ..............................................................50

JFW EQUIPMENT INC ..........................................................30

BOMAG ..................................................................................33

JOHN DEERE ........................................................................39

CAP AUCTIONS ....................................................................65

JOHN DEERE SKID STEER..................................................49

CASE CONSTRUCTION........................................................43

KIRBY-SMITH MACHINERY INC ............................................2

CAT AUCTION SERVICES

KOMATSU AMERICA CORP ..................................14,15,44,45

LAS VEGAS NV ............................................................63

LEEBOY..................................................................................26

CATERPILLAR INC ..................................................................9

LIUGONG CONSTRUCTION MACHINERY ........................21

CEG SCALE MODELS ..........................................................16

MINNICH MANUFACTURING................................................32

CLASSIFIED ..........................................................................56

NPK CONSTRUCTION EQUIPMENT INC............................68

CONSTRUCTION EQUIPMENT GUIDE

NUTT AUCTIONS

REACH YOUR MARKET ..............................................36

TEXARCANA ARKANSAS ............................................65

TARGETED EMAIL ........................................................52

OKADA AMERICA ..................................................................10

TRAILER PROMO..........................................................24

RITCHIE BROS. AUCTIONEERS..........................................67

WANTED ........................................................................57

ROAD BUILDERS MACHINERY ........................................5,55

FL AUCTION PROMO....................................................20

ROADTEC ..............................................................................27

BEAZLEY AUCTION PROMO ......................................64

ROLLER & ASSOCIATES AUCTIONEERS

DITCH WITCH WEST ......................................................34,35

DENVER CO ..................................................................62

DOMINION EQUIPMENT PARTS..........................................22

SAKAI AMERICA INC ............................................................29

ECCO EQUIPMENT ..............................................................13

TAKEUCHI ..............................................................................23

EFFICIENCY SHORING AND SUPPLY ................................18

TOWMASTER ........................................................................47

EQUIFY AUCTIONS LLC ......................................................61

VISIONAIRE INC ....................................................................10

ESCO CORP ..........................................................................22

VOLVO CONST EQUIP & SVCS ..........................................48

FLANGE LOCK ......................................................................18

WACKER NEUSON................................................................53

GENSCO EQUIPMENT CO LTD ............................................6

WIRTGEN AMERICA..............................................................31

HENDRIX MACHINERY LLC ..................................................3

YANMAR AMERICA ..............................................................17

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2014 • Page 67

Unreserved public auctions

30,6

items in North America

Heavy construction and trucks

2005 JOHN DEERE 644J – NEW BRAUNFELS, TX – NOV 14

2011 & 2 – 2010 CATERPILLAR D8T – HOUSTON, TX – NOV 12–13

CATERPILLAR 988G HIGH LIFT – LAS VEGAS, NV – NOV 21

CATERPILLAR D8R – BOISE, ID – NOV 14

Featured upcoming auctions Champaign, IL Houston, TX Boise, ID New Braunfels, TX Phoenix, AZ Tipton, CA Williston, ND Las Vegas, NV Salt Lake City, UT Fort Worth, TX

Nov 11 Nov 12–13 Nov 14 Nov 14 Nov 18 Nov 19 Nov 20 Nov 21 Dec 2 Dec 3–4

JOHN DEERE 200C LC – TIPTON, CA – NOV 19

2007 INTERNATIONAL 7700 – PHOENIX, AZ – NOV 18