West #25,2012 by Construction Equipment Guide

$3.00

Published Nationally ®

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Western Edition

www.constructionequipmentguide.com

December 15, 2012 • Vol. VIII • No. 25 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

Inside

Engineers Call Bullet Train Job of the Century

Caterpillar Holds Event for Media...8

Approximately 20,000 cu. yds. (15,291 cu m) of earth were excavated for the new Diverging Diamond Interchange.

Christmas Tree Makes Tr ip to U.S. Capitol...28

Nevada Opens Diverging Diamond Interchange By Jennifer Rupp CEG CORRESPONDENT

Vaughan Auction A ttracts Diverse Bidders...48

Table of Contents ................4 Recycling Section ........13-22

The new interchange at I-580 and Moana Lane in Reno brought about a round of “firsts” for the Nevada Department of Transportation (NDOT). The construction of a Diverging Diamond Interchange (DDI), a design that is growing in popularity in the U.S., has set the stage for future interchange projects that aspire to be built in an innovative and efficient manner.

With just 64 working days to complete the project, prime contractor Granite Construction renovated the old interchange into one that accelerates traffic and reduces the risk of accidents. The $6.9 million project began in Sept. 12, 2012, when the interchange was partially shut down for reconstruction. Work proceeded in two phases and was complete before the Thanksgiving holiday on Nov. 21, 2012. Project improvements include: drive time see DIAMOND page 12

LOS ANGELES (AP) A bullet train linking Northern and Southern California will be an audacious engineering feat because the line must cross two mountain ranges and a halfdozen earthquake faults, experts said. Planners foresee the 141-mi. (227 km) segment from Bakersfield to Los Angeles running through vast tunnels, delving through the Tehachapi and San Gabriel mountains, plunging 500 ft. (152 m) underground in some places and soaring over canyons on viaducts 200 to 330 ft. (61 to 100.1 m) high, the Los Angeles Times. “It is the project of the century,” said Bill Ibbs, a civil engineering professor at the University of California, Berkeley who has worked on high-speed rail projects around the world. The $68 billion first phase of the project is expected to run more than 500 miles between San Francisco and the Los Angeles and Anaheim areas by 2029. Eventually, supporters hope for high-speed lines running all the way from Sacramento to San Diego. Conditions set for the project say it must be able to reach San Francisco from Los Angeles in no more than 2 hours and 40 minutes. The top speed for the Bakersfield-to-LA segment could be 220 mph. In September, the Federal Railroad Administration approved construction of the first segment, a 65-mi. stretch from Merced to Fresno in the Central Valley. Construction is expected to begin next year. see BULLET page 32

Truck & Trailer Section ........ ......................................28-31 Attachment Section ....23-25 Auction Section ..........43-53 Business Calendar ............38 Advertisers Index ..............50

Ritchie Bros. to Hold FirstAuction in China Ritchie Bros. will be holding its first unreserved public auction in China during Spring 2013. Although relatively new to the Chinese heavy equipment market, unreserved industrial auctions have been a quick and easy method for

equipment buyers and sellers to conduct business on a global scale. Ritchie Bros. will bring the certainty of unreserved auctions to Chinese equipment buyers and sellers now that the company’s wholly owned foreign enterprise appli-

cation has been approved by the Chinese government — making it the first foreign auction company to receive this approval. Ritchie Bros. has formally leased land in the see RITCHIE page 34

Page 2 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Y O U R S TA N D A R D S A R E N O T O P T I O N A L .

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA

A dirty, dusty job isn’t soo bad when you’ve got room to breathe. athe. In fact, it’s pretty nice with Bobcat’s unique, curved door pocket and one-piece seal. They provide a best-in-class, pressurized environment that keeps dust to a minimum. From startup to shutdown, you stay clean and comfortable. We think you’ll approve. There’s only one manufacturer with standards as high as yours. Find out more at www.growneyinc.com

Au thor ized Bobc at De aler

Tom Growney Equipment, Inc. w w w.gr ow neyinc.com

2 3 0 1 C a n d e l a r i a Ro a d N . E . A lbuquerque, NM 87197 505-88 4-2900 Fa x : 505-8 8 4 -879 0

110 0 Troy K ing Road Farmington, NM 8749 9 505-326-1101

240 0 West Bender Hobbs, NM 8 8241 505-392-692 3

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

11323 Rojas E l P a s o, T X 7 9 9 3 7 915-598-113 3

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 3

"In Business for over 30 Years" www.hendrixmachineryllc.com 1993 John Deere 310D, Stk# 8329, OROPS, 4WD, 4541 Hrs, 2 Stick Control, 24” Bkt, 19.5Lx24 Rear Tires, 12x16.5 Front Tires$16,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla 2000 John Deere 850C LT, Stk# 8324, OROPS, Español Sweeps, Screens, St/Tilt Blade, 5,600 hrs., 30" Pads, 11' 8" Blade, 6 Cyl. JD Eng. ........$30,500

2009 Cat D8T, Stk# 8117, EROPS, A/C, Semi U Blade w/Hyd. Tilt, 2,515 hrs., 80% U/C, Rear Ripper s/n TDD01421, 24" Pads, 11' 8" Height ... .............................................................$475,000

2007 Cat D6T LGP, Stk# 7990, EROPS, A/C, St/Tilt Blade, 80% U/C, 8000 Hrs, 36” Pads, 10’7” From Track to Track, 13’4” Blade, 11’ Height..................................................$159,500

2007 Komatsu PC200LC-8, Stk# 8133, EROPS, A/C, 5462 Hrs, 47” Bkt, 32” Pads, 10’6” Wide .. ..............................................................$86,500

2006 Ingersoll Rand SD70D, Stk# 8273, 66" 2005 Cat D6R II LGP, Stk# 8047, EROPS, A/C, Smooth Drum w/Pad Drum Shell Kit, 1,750 hrs., 14.9x24 Tires, 4 Cyl. Cummins Eng ............ Sweeps, Rear Screen, St./Tilt Blade, 7415 Hrs, ...............................................................$38,500 95% U/C, w/Winch, 13’ Blade ............$129,500

Ingersoll Rand SD45D TF, Stk# 8281, 56" Smooth Drum w/Pat Drum Shell Kit, 1,781 hrs., 12.4x24 Tires, 4 Cyl. Cummins Eng......$26,500

2006 Terex TH644C, Stk# 7931, EROPS A/C & Heat, 6,000 lbs., 44 ft., 4WD, 4WS, 3,155 hrs., 13x24 Foam Filled Tires, 48" Forks, 50" Frame, 4 Cyl. JD Eng.............................................$32,500

2006 Skytrak 10054, Stk# 8259, 10,000 lbs., 54 ft., 2,427 hrs., 4WD, 4WS, 48" Forks, 60" Frame, 2009 Cat D5K LGP, Stk# 8262, EROPS, A/C, Aux. Hyd., Hyd. Self Leveling System, Stabalizers, Sweeps, 6 Way Blade, 2,822 hrs., 26" Pads, 10' 17.5x25 Tires, 4 Cyl. Cummins Eng. ........$59,500 6" Blade ................................................$89,500

2005 Cat D3G LGP, Stk# 8288, OROPS, Sweeps, 2003 Takeuchi TB53FR, Stk# 8143, EROPS, Screens, 6 Way Blade, 70% U/C, 6,776 hrs., 25" 5657 Hrs, 23” Bkt, Aux. Hyd, 16” Rubber Tracks, Pads, 10' 3" Wide..................................$34,500 78” Blade, 4 Cyl. YanMar Eng ..............$24,500

1999 Franklin C5000, Stk# 7982, EROPS, A/C, 2,250 hrs., 28Lx26 Tires...........................$36,500

2008 Cat 226B Series II, Stk# 8279, OROPS, 1,191 hrs., 67" Bucket, Aux. Hyd., 13" Rubber Tracks, 4 Cyl. Cat Eng. ..........................$21,500

2005 Komatsu FG25T-11, Stk# 8234, 5,000 lbs., 1995 Deere 750B, Stk# 8237, OROPS, Sweeps, 2008 Cat 320DLRR, Stk# 8342, EROPS, A/C, FM 7 ft., 1,366 hrs., 2WD, 48" Forks, 42" Frame, Rear & Side Screens, ST/Tilt Blade, 7708 Hrs, 24” Stereo, 3146 Hrs, 52” Bkt, 32” Pads, 10’5” Wide 600x9 Rear Tires, 7.00x12 Front Tires, 4 Cyl. Pads, 10’2” Blade......................................$21,500 ............................................................$109,500 Nissan Propane Gas Eng ........................$8,500

2000 Cat 301.5, Stk# 7918, OROPS, 2778 Hrs, 16” Bkt, Aux. Hyd., 9” Rubber Tracks, 39” Blade, 3 Cyl. Cat Eng.........................................$13,500

2004 Takeuchi TB53FR, Stk# 8144, EROPS, A/C, 3,504 hrs., 12" Quick Connect Bucket, Aux. Hyd., 78" Blade, 16" Rubber Tracks ......$26,500

2006 Skytrak 10054, Stk# 8252, 10,000 Lbs, 54’, 3671 Hrs, 4WD, 4WS, Hyd. Self Leveling System, 2008 Cat 320DLRR, Stk# 8339, EROPS, A/C, 48” Forks, 60” Frame, 17.5x25 Foam Filled Tires, FM Stereo, 3513 Hrs, 30” Bkt, 32” Pads, 10’5” Front Stabilizers ........................................$59,500 Wide ....................................................$109,500

2008 Case 420CT III, Stk# 7884, OROPS, 59 Hrs, 13” Rubber Tracks @ 70%, Aux Hyd, 4 Cyl Eng ........................................................$21,500

2005 Ditch Witch RT40, Stk# 8159, OROPS, 2008 Cat 330DL, Stk# 8323, EROPS, A/C, 4,635 1999 Cat 140HVP, Stk# 8285, EROPS, A/C, 2003 Shuttle Lift 3330FL, Stk# 8314, 8-1/2 Ton, 1,093 hrs., 12" Trench Width, 63” 4 Way Blade, hrs., 52" Bucket, 34" Pads, 11' 4" Wide .............. 15,354 Hrs, 14’ M/B, 14.00Rx24 Tires, 10’3” Side Shift Boom, 29x12.50x15 Tires, 3 Cyl. Deutz 3353 Hrs, 10.00x15TR Tires, 4 Cyl. Cummins ............................................................$155,500 Height, 8’ Wide..........................................$99,500 Eng ........................................................$13,500 Eng., Wt. 17,000 Lbs ............................$32,500

2007 Cat 247B, Stk# 8171, OROPS, 2115 Hrs, 70” Bkt, 15” Rubber Tracks, 4 Cyl. Perkins Eng, Aux Hyd ................................................$26,500

2008 Cat IT38G, Stk# 8283, EROPS, A/C, Stereo, 9,511 hrs., 8' 9" Bkt, 87x34.00x25 Logger Tires, 11'6" Ht, 10 ft. Wide........$69,500

2006 Skytrak 10054, Stk# 8258, 10,000 lbs., 54 2009 Cat 336DL, Stk# 8341, EROPS, A/C, FM 2006 John Deere 650J LGP, Stk# 8137, EROPS, ft., 2,752 hrs., 4WD, 4WS, 48" Forks, 52" Frame, Stereo, 3331 Hrs, 57” Bkt, 34” Pads, 11’4” Wide A/C, FM Stereo, Forestry Package, 6-Way Blade, Aux. Hyd., Hyd. Self Leveling System, 4 Cyl. ............................................................$179,000 4725 Hrs, 10’9” Blade ..........................$69,500 Cummins Eng............................................$59,500

2001 Broce BB250B, Stk# 8290, OROPS, 1,067 hrs., 3 Wheel, 8 ft. Broom, 4 Cyl. Kubota Eng., St205/75Rx14 Tires ................................$9,500

2007 Ingersoll-Rand SD45, Stk# 8313, 54" Smooth Drum w/Pad Drum Shell Kit, 652 hrs., 12.4x24 Tires, 4 Cyl. Cummins Eng......$29,500

2009 Cat D8T, Stk# 8233, EROPS, A/C, Rear Screen, St/Tilt Blade, 2,834 hrs., 28" Pads, 75% U/C, Allied W12E Winch, 11' 4" Ht., 9' 7" Track to Track, 11'6" w/Frame, 16'4" Blade ......$425,000

2006 John Deere 650J LT, Stk# 8181, EROPS, A/C, Sweeps, 6-Way Blade, 2077 Hrs, 75% U/C, 18” Pads, 8’9” Wide ..............................$67,500

2008 Cat 416E, Stk# 8198, OROPS, 4WD, 2,063 hrs., 72" Bucket, 2 Stick Control, 12.5x80x18 Front Tires, 19.5Lx24 Rear Tires ..........$48,500

Page 4 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WESTERN EDITION Mobile

LinkedIn Facebook

Twitter

YouTube

Circulated Throughout •Alaska •Arizona •California •Colorado •Hawaii

•Idaho •Montana •New Mexico •Nevada •Oklahoma •Oregon •Texas •Utah •Washington •Wyoming

IN THIS ISSUE SPECIAL SECTION…

RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES…

INNOVATION DEMONSTRATED AT CATERPILLAR PRESS EVENT

The new visitor’s center allows for self-guided journeys of Caterpillar’s products, history, achievements and opportunities through interactive displays and exhibits.

BOBCAT COMPANY INTRODUCES NEW MONTANA DEALER

MACK PINNACLE DELIVERS CHRISTMAS TO U.S. CAPITOL

Bobcat Company has expanded its dealer network with the addition of Bobcat of Miles City as an authorized sales and service provider of Bobcat products.

The tree was hauled in a special trailer and pulled by a SmartWay-certified Mack Pinnacle model driven by former U.S. Sen. Ben Nighthorse Campbell.

PEOPLENET PRE-WIRE OPTION ADDED FOR KENWORTH MODELS

These and other PeopleNet technology tools and services can be utilized by fleets to promote efficient and cost-effective transportation.

MACK TRUCK JOINS U.S. FOREST SERVICE TO PROVIDE TRAINING

EAST IMPROVES INTEGRATED STAIRWAY FOR FLATBED TRAILERS

Organized by the U.S. Forest Service, the ride-along took place during the 2012 Capitol Christmas Tree tour.

To provide a simpler, easier and safer entrance to and exit from the flatbed deck, East Manufacturing first introduced an optional integrated stairway a few years ago.

VAUGHAN DRAWS 800 IN-PERSON, ONLINE BIDDERS TO AUCTION Vaughan sold equipment to buyers from Malaysia, Jordan, Mexico, Guatemala, Bolivia, and Peru.

36 CLASSIFIEDS 38 BUSINESS CALENDAR 44 COMING AUCTIONS

EQUIPMENT… 14 VERMEER BC900XL Brush Chipper 22 POWERSCREEN Warrior 1400X Screen

Founder, Publisher & CEO Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr.

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Christine Reckner Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 Toll Free Fax Web site Editorial e-mail Advertising e-mail

215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com

editorial@cegltd.com production@cegltd.com

For advertising rates: Contact Edwin M. McKeon Jr. National Sales Manager 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 e-mail tmckeon@cegltd.com Contact Dale Agnew

•Arizona •Colorado •New Mexico •Oklahoma •Texas •Wyoming

Toll Free 877/877-4997 Fax 972/695-6049 e-mail dagnew@cegltd.com Contact Frank Strazzulla

•Alaska •California •Hawaii •Nevada •Oregon •Utah •Washington

949/459-1767 Fax 949/203-2859 e-mail fstrazzulla@cegltd.com Contact Patrick Kiel

•Idaho •Montana

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com Construction Equipment Guide Western Edition is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Application to mail at periodicals postage prices is pending at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2012, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ December 15, 2012 â&#x20AC;˘ Page 5

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

2010 Komatsu PC130-8; #81367, Cab/AC, 24â&#x20AC;? Shoes, 8â&#x20AC;&#x2122; Arm, 500 Hrs ......................$112,500

2003 Komatsu D61PX-12; #81788, Cab/AC, 34â&#x20AC;? Shoes, Drawbar, 12,050 Hrs ..........$59,500

2001 Caterpillar 730; #91650, Cab/AC, 23.5-25 Tires, 12,400 Hrs ......................................CALL

2005 Caterpillar 953C; #80890, Cab/AC, GP Bkt, 2-Lever Controls, 4250 Hrs............$89,500

1999 Komatsu PC270LC-6; #91719, 11â&#x20AC;&#x2122;6â&#x20AC;? Arm, 31.5â&#x20AC;? Tracks, 5350 Hrs ........................$89,500

2006 Komatsu D65EX-15E0; #91603, Cab/AC, 26â&#x20AC;? Tracks, Sweeps, Ripper, 4350 Hrs$159,500

1990 Deere 744E; #91733, Cab, 4.75 Yd Bkt, 23.5-25 Tires ........................................$49,500

1997 Dynapac CA151PD; #91393, OROPS, 66â&#x20AC;? Padfoot, Vibration, 3200 Hrs ................$29,500

2002 Komatsu PC300LC-6; #91646, Cab/AC, 33.5â&#x20AC;? Shoes, 13â&#x20AC;&#x2122; Arm, 10,700 Hrs ........$76,500

1998 Caterpillar 140H; #81831, Cab/AC, 14â&#x20AC;&#x2122; Moldboard, Ripper, 6850 Hrs..............$139,500

2003 Komatsu WA180-3; #91673, Cab/AC, Ride Control, JRB QC, 8800 Hrs ..........$47,500

2008 Caterpillar 420E; #91691, Cab/AC, 4x4, Ext-A-Hoe, Aux Hyd, 3350 Hrs..............$59,500

Page 6 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CALL DOUG OR SAM (866) 485-7180 WWW.RBUSED.COM

Is your loader scale giving away all your profit? Put Put your your trust trust in in true-weight true-weight VEI VEI Loader Loader Scale Scale systems systems from from RTS RT S In-motion weighing In-motion weighing accurate accurate to to ± 1% 1% Easy and reliable reliable E asy tto o use, use, proven proven and A Also lso available available for for mini mini loaders loaders and and sskid kid ssteers teers

SAFETY CAMERAS

GRAPPLE SCALES

www.track-vision.com

www.rmtequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 7

OPERATING WEIGHTS TO 81,600 POUNDS

BUCKET CAPACITIES TO 2.5 CUBIC YARDS

YANMAR & CUMMINS ENGINES

DIGGING FORCES UP TO 48,559 POUNDS

UP TO 260 HORSEPOWER DIESEL ENGINES

DUMPING HEIGHTS TO 24’4”

DIGGING DEPTHS TO 24’1”

YOU DON’T HAVE TO DIG REAL DEEP... ...TO DIG REAL DEEP You don’t have to have real deep pockets to invest in a LiuGong. LiuGong hydraulic excavators are designed and built to compete value-wise, both in the showroom and out on your next job. With lower ownership and operating costs, you’ll be able to break out of your costly earthmoving routine and make some money with a LiuGong. From a mini-excavator for your next landscaping job to a full-sized machine for some major pipeline chores, check one out at your LiuGong dealer today.

LiuGongNA.com 281-579-8882

LiuGong is a fifty-plus-year-old construction equipment manufacturer with a huge range of products for the North American quarry, construction, recycling, timber, landscaping, utility and other markets – WHEEL LOADERS. HYDRAULIC EXCAVATORS. BACKHOE-LOADERS. SKID-STEER LOADERS. SOIL COMPACTORS. LiuGong is the only equipment manufacturer to receive the coveted National Quality Award of China and are ISO9001 and ISO14001 certified. Truly a top-shelf, world-class organization.

VISIT YOUR AUTHORIZED LIUGONG DEALER TODAY Arizona Earhart Equipment Corp. Tucson 520-889-6396 California Westrax Rancho Dominguez 310-631-2727

Texas Anderson Machinery Co. Austin 512-272-8133

Texas (Cont’d.) Anderson Machinery Co. San Antonio 210-661-2366

Corpus Christi 361-289-6043

Victoria 361-575-8111

Pharr 956-781-5995

SELECT TERRITORIES AVAILABLE

Texas (Cont’d.) Noble Equipment Houston 855-777-4424

Page 8 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Innovation Demonstrated at Caterpillar Press Event Caterpillar introduced several new technologies to national and international media recently at its facilities in Peoria, Ill. These technologies included a new more fuel-efficient wheel loader, a hybrid excavator and Tier IV Final. The event included a tour of the new Caterpillar Visitor Center. Caterpillar invested more than $52 million into the 50,000 sq. ft. facility and the new Peoria Riverfront Museum projects, which achieved LEED Gold status. The new visitor’s center allows for self-guided journeys of Caterpillar’s products, history, achievements and opportunities through interactive displays and exhibits. Visitors have the power to unleash their inner engineer and design their very own Cat machine, or hop onto a simulator and see firsthand what it’s like to operate a Caterpillar excavator, dozer or loader. A heritage gallery displays a Caterpillar D8 tractor and informs of the company’s milestones, while the Caterpillar Jobsite Theater promotes job opportunities at the company. The new center also features the 797F Mining Truck Theatre, which is a 62-seat theater that was converted from a working 24 ft.-tall (7.3 m), 400-ton (362.9 t) Cat 797F mining truck. The 797F is approximately the size of a two-anda-half-story house, covering more than 4,500 sq. ft. (418 sq m). Caterpillar had to create new wheels for the truck-converted theater, since the tires on the 797F weighed too much (11,680 lbs [5,298 kg]). The Next Generation Is Here, the title Caterpillar gave to the event, refers to the idea that Caterpillar is bringing the future to the present. Cat 966 K XE The Cat 966K XE wheel loader; is powered by a Cat C9.3 Acert diesel engine, delivering a peak net rating of (290 hp) 220 kW. It incorporates a high-pressure common rail injection system for a clean, efficient burn. The Cat clean emissions module, which incorporates a diesel oxidation catalyst, a diesel particulate filter and the Cat regeneration system, functions automatically without interrupting the machine’s working cycle. The engine can be controlled to operate more efficiently over a wide range of conditions. During deceleration, machine momentum can be recovered as free energy to power implements or the cooling fan, while significantly lower working engine speeds result in reduced soot build-up for longer regeneration intervals, cutting fuel use further. The 966K XE is equipped with an advanced powertrain system, which delivers up to a 25 percent fuel efficiency, according to the company. The 966K XE has been engineered to deliver efficiency by utilizing an integrated Cat continuously variable transmission system. A hydraulic pump and motor (variator unit), allows for a smooth and continuous gear ratio change between engine speed and machine speed. The variator provides this ratio flexibility while reducing the heat load generated by the drive train when the machine is digging, pushing and climbing under heavy load. The continuously variable gear ratio of the variator also enables the engine to run at a more efficient operating range independent of machine ground speed. Power is transmitted through the variator unit (versatile gear ratio) as well as a parallel mechanical gear path (highest efficiency). Power through the variator and mechanical paths are combined through a series of planetary gear sets in order to maximize the transmission efficiency over a wide range of operating conditions. Media demoed this machine in Caterpillar’s two-acre

The Cat 336E H uses a method of storing energy for later use. The company chose a hydraulic hybrid over an electrical one since the technology decreased overall operating costs.

indoor proving ground. Cat 336E H The Cat 336E H uses a new hydraulic hybrid technology developed by Caterpillar. “A hybrid is independent of any particular technology; it doesn’t have to be electric,” said Ken Gray, global product manager of large hydraulic excavators of Caterpillar’s excavation division. “Caterpillar has developed, built, and tested electric hybrid excavators, but, until now, we had not found a hybrid approach that would actually lower our customers’ owning and operating costs. Large excavators operate in high-production applications in which fuel is a very significant operating cost for our customers. So, the 336E H, the hybrid version of our workhorse 336E, is ideal for introducing our new hydraulic hybrid technology,” said Gray. The 336E H has all of the same powerful advantages of the 336E with the biggest difference between the two models having even greater fuel efficiency. To achieve added fuel savings, the design of the 336E H uses three building block technologies that: 1) Conserve fuel with engine power management via the Cat electronic standardized programmable (ESP) pump, which smoothly transitions between the hydraulic hybrid power sources, engine, and accumulator. 2) Optimize performance using restriction management via the patented Cat adaptive control system (ACS) valve, which intelligently manages restrictions and flows to seamlessly control machine motion with no loss of power, and to

One member of the media tries the virtual 336E H in “The Cave.”

ensure operators experience no difference in control, hydraulic power or lift capability. 3) Reuse energy via the hydraulic hybrid swing system, which captures the excavator’s upper structure swing brake energy in accumulators, and then releases the energy during swing acceleration. Customers can expect the 336E H to use up to 25 percent less fuel compared to a standard 336E, and up to 33 percent less fuel than the 330/336D, said Caterpillar. All three of the technology building blocks, conserve, optimize and reuse, are integrated together to maximize fuel savings in a variety of applications. see PEORIA page 34

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 9

GREAT HOLIDAY GIFTS! Caterpillar D11R Track-Type Tractor 1:50 Scale...$90

Bantam Truck Mounted Crane 1:50 Scale...$125

Komatsu WA500 Wheel Loader 1:50 Scale...$95

All New in Box

Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $75 Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50

John Deere 400D Articulated Truck 1:50 Scale...$50

Komatsu D375 Dozer, 1:50 Scale ..................................$90 Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80 Komatsu HM250 Articulated Truck, 1:50 Scale ............$70

Scale ....................................................................................$75 Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale..$75

Komatsu PC14R Mini-Excavator, 1:32 Scale ................$40

CALL Toll Free

Allis-Chalmers HD-41 Dozer, 1:25 Scale ....................$200

Komatsu PC200 Excavator, 1:50 Scale ......................$100

800-523-2200

Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$60

Komatsu PC350 LC Excavator, 1:50 Scale ..................$85

Ext. 197

Bantam C-35 Crawler Shovel, 1:50 Scale ....................$70

Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$250 Komatsu SK1020 Skid Steer Loader, 1:25 Scale ........$35

Bantam Truck Mounted Shovel, 1:50 Scale ....................$60 Bobcat E35 Compact Excavator, 1:25 Scale ................$50

Caterpillar 312B L Excavator, 1:50 Scale......................$65

Komatsu SK1026 Skid Steer Loader, 1:25 Scale ........$35

Bobcat M400 Gold 50th Anniversary Skid Steer Loader,

Caterpillar 906H Compact Loader, 1:50 Scale..............$40

Komatsu WA500 Wheel Loader, 1:50 Scale..................$90

1:25 Scale ........................................................................$35

Caterpillar 963D Track Loader, 1:50 Scale....................$70

Komatsu 475A-5EO Dozer, 1:50 Scale ........................$125

Bobcat M610 Golden 50th Anniversary Skid Steer

Caterpillar 977 Traxcavator, 1:50 Scale ........................$65

Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..

Loader..............................................................................$25

Caterpillar Military 924H Versalink Loader in Desert

..........................................................................................$95

Bobcat S175 Skid Steer Loader, 1:25 Scale ................$40

Camouflage, 1:50 Scale ..................................................$45

Kubota KX121-3 Compact Excavator, 1:24 Scale ........$50

Bobcat S185 Skid Steer Loader, 1:25 Scale ................$45

Doosan Moxy MT31 Articulated Truck........................$115

Link-Belt 800 X2 Excavator,1:50 Scale........................$240

Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer

Hamm GRW280 Compactor w/Cabin............................$75

Link-Belt 80100 Rough Terrain Crane ........................$190

Set, 1:50 Scale ................................................................$60

Hamm 3307 Compact Roller, 1:34 Scale ......................$45

Mack Granite MP w/ Bottom Dump Trailer ..................$85

Bobcat 743 Skid Steer Loader, 1:25 Scale....................$35

Hitachi EH700 Off-Highway Truck, 1:50 Scale..............$35

Mack R Model Mixer Truck, Patriotic Detailing, 1:34 Scale ..

Bobcat 773 50th Anniversary Skid Steer Loader, 1:25

International "S" Series Dump Truck,1:25 Scale ......$125

..........................................................................................$70

Scale ................................................................................$25

International TD-15 Dozer, 1:50 Scale ..........................$60

Northwest 25-D Shovel, 1:50 Scale ..............................$85

Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ......$25

International TD-20E Dozer, 1:64 Scale ........................$24

Peterbilt 367 Dump Truck w/ Beavertail Trailer, 1:50 Scale

Bobcat A300 Skid Steer Loader, 1:25 Scale ................$35

International TD-25 Dozer, 1:50 Scale ..........................$70

........................................................................................$120

Bobcat A770 Skid Steer Loader, 1:25 Scale ................$40

John Deere 624K Wheel Loader, 1:50 Scale ................$35

Vogele Vision 5200-2 Paver, 1:50 Scale ......................$140

Bobcat 2008 Road Tour Semi Tractor/Trailer, 1:64 Scale ..

John Deere 850K Dozer ................................................$60

Volvo EC460 L Excavator, 1:50 Scale ........................$160

..........................................................................................$25

John Deere 872 GP Grader, 1:50 Scale ........................$60

Volvo SD-122 Soil Compactor, 1:72 Scale ....................$25

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 10 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Three Days Here

and You're Good for the Year

Private Me etings in Suites

ion

Industry-Specific Educat

CONDEX Trade Show

www.aedsummit.com Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

Open for Business...

Bobcat Company Introduces New Montana Dealer Bobcat Company has expanded its dealer network with the addition of Bobcat of Miles City as an authorized sales and service provider of Bobcat products. The dealership is located at 2323 S. Haynes Ave. in Miles City, Mont. Bobcat of Miles City will carry the full line of Bobcat equipment. “We think the Bobcat line of equipment will complement things really well, and we are excited to offer our customers new products,” said Blayne Watts, general manager of Bobcat of Miles City. Bobcat of Miles City is a division of Riverside Marine & Cycle, which celebrated its 10th anniversary last December. Although the official grand opening celebration for Bobcat of Miles City is set for October 1 of this year, the dealership is already officially open for business and has been getting in new Bobcat equipment daily. For more information, call 406/874-BCAT (2228), or visit www.bobcatofmilescity.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 11

8231 John W. Carpenter Fwy

Dallas, TX 75247

(888) 616-5991 Compactors - Walk/ Tow Behind 2006 JCB Vibromax VM1500, 535 Hrs, 33” Trench Roll ....................(FF000110) $7,900 2006 JCB Vibromax VM1500, 370 Hrs, 33” Trench Roll ....................(90776245) $7,500 2007 JCB Vibromax VM1500, 557 Hrs, 33” Trench Roll ....................(90808432) $7,500 2007 JCB Vibromax VM1500, 210 Hrs, 33” Trench Roll ....................(90888203) $8,000 2005 JCB Vibromax VM1500, 341 Hrs, 33” Trench Roll ....................(90948719) $7,500 2007 JCB Vibromax VM1500F85, 558 Hrs, 33” Roll ......................(100032784) $7,500 2008 JCB Vibromax VM1500F85, 10 Hrs, 33” Roll ......................(100032783) $8,000

r Fo 3 ale S

Loader Backhoes 2006 JCB 214, 2,002 to 2,799 Hours, CN, 4wd, E-Stick, with 24” Bucket ........................$33,000

2005-2008 JCB 8018X, 291-667 Hours, Rubber Tracks, 12” Bucket ..................$15,000-$17,000

Forklifts - Telescopic

Skip Loader

Excavators - Mini

2007 JCB 506C, 897 Hrs, 6,000 Pound, 36’

2006 JCB 3C LL, 213 Hrs, Box Blade, 4wd, w LP Box Scraper ......(00107179) $25,000 2006 JCB 3C LL, 1,082 Hrs, CN, 4wd, w 6’ Box Blade ....................(FF000122) $25,000

2008 JCB 8040Z, 402 Hours........................ ....................................(91084658) $29,500 2005 JCB 8018X, 545 Hrs, w/ 12” Bucket .. ....................................(90924825) $15,000 2007 JCB 8018X, 667 Hrs .......................... ....................................(90886770) $15,000 2008 JCB 8018X, 291 Hrs, Canopy, 9” Rubber Tracks ............(90993138) $17,000 2008 JCB 8025Z, 498 Hrs, Canopy, 10” Rubber Tracks ............(90923647) $17,000 2006 JCB 8027Z, 784 Hrs, Canopy, 10” Rubber Tracks ............(90954077) $15,000

Reach ..........................(90896643) $39,500 2007 JCB 506C, 3,336 Hrs, 6,000 Pound, 36’ Reach ....................(90896645) $37,500

Skid Steers

2007 JCB 520-40, 385 Hrs, 4,000 Pound,

Crawler Loader

2007 JCB 190, 1,167 Hrs ............................ ....................................(AA002963) $18,500

13’6” Reach ................(90762460) $32,000

2007 CAT 963, 3,426 Hrs, Cab, AC, Ripper, 22” Trk ....................(100033859) $150,000

Wheel Loader 2010 JCB 436E, 4,371 Hrs .......................... ................................(100033425) $125,000

2006 JCB 8027Z, 632 Hrs, Canopy, 10” Rubber Tracks ............(90949801) $15,000 2006 JCB 8027Z, 377 Hrs............................ ....................................(90954074) $17,000 2008 JCB 8035Z, 829 Hrs, Cab, Rubber Tracks, 12” Bucket......(90886772) $25,000

r Fo 2 ale S

2008 JCB 520-50, 564 Hrs, 4,400 Pound, 16’6” Reach ................(91020886) $37,000

Excavators

2006 JCB 524-40, 7,204 Hrs, 5,000 Pound,

2006 JCB JS260, 3,508 Hrs, 57,500 # Cap,

17’4” Reach ..............(MSC02222) $17,000

Thumb, with Bucket ..(AA002602) $80,000

2007 JCB 506C, 897 to 3,336 Hours, 6,000# Capacity, 36’ Reach ................$37,500-$39,500

2006 JCB 214, 2,002 Hrs, CN, 4wd, E-Stick, w 24” Bucket ..............(CC000037) $33,000 2006 JCB 214, 2,799 Hrs, CN, 4wd, E-Stick, w 24” Bucket ..............(BB000037) $33,000 2006 JCB 214, 2,279 Hrs, Cab, 4wd, EStick, w/ 24” Bucket....(FF000026) $33,000 2007 JCB 3C, 1,355 Hrs, CN, 4wd, E-Stick, w 24” Bucket ..............(FF000211) $33,000 2008 JCB 3C, 1,051 Hrs, CN, 4wd, E-Stick, w 24” Bucket ..............(90870582) $33,000 2007 JCB 3CX14, 1,802 Hrs, Cab, 4wd, EStick, 24” Bucket ........(90813979) $37,000 2007 JCB 3CX14, 1,680 Hrs, CN, 4wd, Wet Kit, Std Stick ..............(90816565) $35,000

See full inventory at: www.DarrJCB.com

llu.ne www.a

scan for video

ALLU D-SERIES

Screener Crushers & Fine Screeners ALLU provides portable screening and crushing attachments that will crush, mix, stabilize, aerate and screen for pipelines, topsoil, compost, construction debris, contaminated soils, asphalt, mulch, salt, coal, sand, gravel, sludge, garbage, bio-waste, food waste, leaf mulch, glass, gypsum, pallets, lime & much more! ALLU Group, Inc. | Info Call: 1-800-939-2558 | Email: usa@allu.net

• Available to fit • High production even with wet muddy materials • 5/8” & 1” Fine screening size • 1-1/4” and up sizes with replaceable hammers

Page 12 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Project Improvements Include Congestion Relief, Safety DIAMOND from page 1

savings, efficiency, congestion relief, safety, cost and time savings, reduction in head-on crashes and reduction in maintenance. This is the first transportation project in northern Nevada to use the Construction Manager at Risk (CMAR) method of procurement. CMAR, which is also frequently used in the construction of schools, is “particularly suited to renovation type projects because this type of project is time sensitive, has a complex scope of work, can be subject to changes that become apparent late in the design process and requires a high level of complex construction management.” according to the Washoe County School District. A final NDOT first on this project is the inclusion of “green” bike lanes resulting in safe bicyclist access. Phase one included reconstructing the I-580 southbound Moana Lane off-ramp and prep work to reconstruct the northbound on and off-ramps. Phase two included reconstruction of the I-580 Moana Lane northbound on and off ramps, the southbound on ramp, and Moana Lane from just west of the southbound off-ramp to just east of the northbound off-ramp. The Diverging Diamond Diverging diamond interchanges are often used at intersections located beneath or above freeway bridges. “NDOT wanted to improve this interchange without a lot of land acquisition or extended disruption to traffic,” said NDOT spokesperson Scott Magruder. Diverging diamond interchanges have been in use for years in France. The first diverging diamond interchange in the United States was completed in 2009 in Springfield, Miss., followed by other successful diverging diamond interchanges in states such as Utah. Plans for diverging diamond interchanges also are proceeding in many additional states.

Looking up the completed northbound on ramp.

East end of the project looking to the west.

Diverging diamond interchanges were ranked one of Popular Science’s top 25 “Best of What’s New.” How It Works At a diverging diamond interchange, traffic briefly crosses over to the left (opposite) side of the roadway, safely guided by traffic signals at each crossover. This allows vehicles to turn left onto freeway on-ramps without stopping and without conflicting with through traffic. In other words, traffic is briefly routed to the opposite side of the road at an intersection. Because vehicles are now traveling on the left side of the road, they are on the same side of the road as freeway onramps and are able to take the freeway on-ramp or other exit without waiting in separate turn lanes as in traditional intersections.

Grading the 395 / I-580 South Bound Moana Off Ramp.

Through traffic simply travels through the intersection and switches back to the right side of the road after the intersection, all guided by roadway signs and markings. Diverging diamond interchanges feature signs, striping, curbs, headlight glare screens and concrete barriers to guide and safely separate opposing traffic as it moves through the interchange. The Benefits The free, unsignalized left turns onto freeway on-ramps, etc. helps reduce congestion. “The key to the DDI is the ‘free’ left turn,” said Magruder. There are fewer signal phases and a shorter wait at traffic lights by eliminating signalized left-hand turn lights. DDIs often reduce by half the number of conflict points at which vehicles can potentially collide, and make “wrong way” entry onto the freeway ramps extremely difficult. Additionally, they can be more cost and time-effective to build, as they often require less land and fewer potentiallycostly changes to existing road structures. DDIs also provide heightened pedestrian/bicyclist safety with the construction of designated, enclosed shared use paths built in the middle of the diamond interchange. Granite Construction, headquartered in Watsonville, Calif., has built two other Diverging Diamond Interchanges and works on 2,000 construction projects annually. The I-580 project called for 20,000 cu. yds. (15,292 cu m) of roadway excavation, and installation of 9 manholes and 17 drainage inlets. Crews layed 9,000 ton (8,163 t) of aggregate base and 3,800 ton (3,446.6 t) of dense grade paving. They also poured approximately 6,500 cu. yds. (4,970 cu m) of PCCP and set more than 15,000 linear ft. of white paving forms. In 64 working days on this interchange, Granite logged over 25,000 man hours with zero injuries. For more information, visit www.Moana395.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Pages 13-22

Crushing, Screening & Recycling Section Metso C120 Jaw Combines Crushing Efficiency, Safety Metso’s Mining and Construction Technology’s C120 jaw crusher is the 13th member of the C-series range of crushers. Metso’s C120 combines uncompromising reliability, crushing efficiency and versatility in both stationary and mobile applications with safety and ease of use. “When starting the C120 project, we listened closely to our customers and collected field data from a number of sites. Based on that, we decided to design the crusher cavity and kinematics first. As a result, Metso can now offer aggregates producers, large-scale contractors and mining companies a new crusher that meets all the standards set for any demanding application,” said Ilkka Somero, Metso’s product manager of jaw crushers.

Metso C120 jaw crusher.

Productivity Through Long Stroke and Fixed Jaw Die The productivity of the C120 is the result of several new design elements. The crusher features a long and aggressively directed stroke, and a fixed jaw die longer than previously seen in this crusher size class. The C120 has a large feed opening of 34 by 47 in. (86 by 119 cm) and an aggressive cavity cross section, resulting in a high performance and reduction ratio, according to the manufacturer. In terms of cavity volume and crusher weight, the C120 is positioned between the existing Metso C116 and C125 jaw crusher models. Easy to Install The C120 is easy to install, due to its compact design, and includes an optional integrated motor bed and guards. Being wellbalanced, the C120 is quick, easy and costefficient to install using rubber mounting

Metso when designing a new crusher. The C120 features optional robust composite flywheel guards that allow quick and safe access to all service points. The standard delivery includes lifting tools for jaw dies, cheek plates and toggle plate, contributing to operational safety when changing wear parts. The Metso C120’s nominal power is 200 hp (160 kW), operating speed 230 rpm, closed side setting between 2.75 to 8 in. (70 to 20 cm). The operational weight is 57,200 lb. (26,000 kg), excluding options. For more information, visit Safety the Highest Priority The optional, robust composite flywheel guards allow www.metso.com. Safety is the highest priority for quick and safe access to the service points.

pads underneath the crusher mounting brackets. No separate horizontal supports are needed. The crusher can be mounted in a variety of ways to ensure an easy fit onto an existing or new steel structure. Mechanical or hydraulic setting adjustment systems are available for quick, easy and safe setting adjustment. For jaw dies, several cavity options are available. Depending on the customer’s preference, it is possible to use either single- or two-piece jaw dies.

Page 14 • December 15, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CONTRACTOR PREFERRED 70% of all HydroSeeders® purchased by contractors today are

For Reliable Equipment to Get the Job Done, Call One of These Fine Dealers and Request Austin 512-388-2529

Dallas 214-819-4100

Houston Fort Worth www.romco.com 817-626-2288 ROMCO Equipment Co. has 713-937-3005 acquired Conley Lott Nichols.

San Antonio 210-648-4600

Longview 903-758-5576

Mercedes 956-565-0100

Both are Full Service Dealers for the Entire Finn Product Line, Including HydroSeeders® Straw Blowers Bark Blowers

Farmington, NM 505-324-8601

Perris, CA 909-355-3600

Albuquerque, NM Prescott, AZ 928-778-5621 www.roadmachinery.com 505-345-8383 Gilbert, AZ 480-545-2400

Tucson, AZ 520-623-8681

El Paso, TX 915-872-1001

BC900XL Brush Chipper Features Large Feed Opening

The Vermeer BC900XL features a large 9 by 14-in. (23 by 35.6 cm) feed opening to help boost productivity by reducing the need to trim heavily branched material before feeding it into the chipper.

The Vermeer BC900XL features a large 9 by 14in. (23 by 35.6 cm) feed opening to help boost productivity by reducing the need to trim heavily branched material before feeding it into the chipper. A 33-in.-diameter (83.8 cm) disc rotates at 1,400 rpm and features two steel chipper knives with two usable cutting edges each. Two shear bars also have two usable edges to help extend wear life. Another feature — the SmartFeed system — monitors engine rpm and automatically stops and reverses the single horizontal feed roller when feeding larger, hardwood material, helping to enhance chipping productivity. A 40 hp (29.8 kW) Kohler Command CH1000 gas engine provides the power to pull and process difficult branch material. The engine also offers a no-spill oil-filterchange feature for ease of serviceability. The Vermeer BC900XL is equipped with safety features such as a long feed table design, bottom feed stop bar and a four-position feed control bar. The bottom feed stop bar is strategically located to make it possible for the operator’s leg to strike the bar and shut off the feed, either intentionally or automatically, in an emergency situation. For more information, visit www.vermeer.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 15, 2012 • Page 15

Some Hammers Are Just Too

Born to ROC

Big For Their Ads! MIDCO Demolition Tool Company Performs a Complete Teardown & Complete Rebuild Including: 1 - Remove the head. 2 - Pull the cylinder. 3 - Hot pressure wash the entire unit. 4 - Polish piston & check tolerances. 5 - Rebuild & charge accumulator. 6 - Install all new seals. 7 - Repaint to spec. 8 - Install new chisel & bushing. 9 - All hammers include new hoses, seals, chisel or moil points, paint, OEM decals and final hammer testing.

Midco Offers the Finest in New Hydraulic Hammer and the Highest Quality in Rebuilds! MIDCO Demolition Tool Company... Your “One-stop Shop” for New, Used and Rebuilt Hydraulic Hammers Plus Over 1,300 Hammer Tools and Parts for Sale!

SALES • SERVICE • PARTS

OEM REPAIR FACILITY - DALLAS, TX Call David Spainhour in Dallas,TX 214-688-0444 • Fax 214-630-5419 Email: dspainhour@midcosling.com

Engineered for heavy duty operations and tough conditions Looking for a partner you can trust? The Atlas Copco PowerROC E-series rigs are tough, reliable and uncomplicated, and come equipped with essential technology for higher productivity, low maintenance and quality drilling. And the design never loses sight of operator safety and ergonomics. The PowerROC E-series—ready to ROC. 800-732-6762 www.atlascopco.us

Page 16 • December 15, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

102x152 Track Mounted Impact Plant

6x16 2 Deck Screen-It

Rock-It Static Grizzly

Picking Station with Screen-It

Separate-It RWS 2000 Rock/Wood Separator

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 15, 2012 • Page 17

High Productivity – Low Operating Costs SENNEBOGEN green line material handling machines make your competitors “green with envy” Waukesha-Pearce Industries, Inc. Corporate Office: 12320 So. Main Houston, TX 77035 713/723-1050 • Fax: 713/551-0798 www.wpi.com

Bane Machinery Inc.

Bejac Corporation

Modern Machinery

Titan Machinery

www.banemachinery.com

www.bejac.com

www.modernmachinery.com

www.titanmachinery.com

Dallas, TX 214/352-2468

Fort Worth, TX 817/847-5894

Placentia, CA 714/528-6224

Escondido, CA 877/54-BEJAC

Spokane, WA 800-541-0754

Boise, ID 800-221-5211

Denver, CO 303-286-7000

Omaha, NE 402-733-3700

Sacramento, CA 888/655-3077

Fresno, CA 800-77-BEJAC

Kent, WA 800-669-2425

Pocatello, ID 800-829-4450

Fargo, ND 701-237-3333

Sioux Falls, SD 605-336-3434

Rochester, WA 800-304-4421

Missoula, MT 800-332-1617

Tomball, TX 281/351-9016

Edinburg, TX 956/386-0107

Kilgore, TX 903/984-2011

San Antonio, TX 210/648-4444

Portland, OR 800-950-7779

Kalispell, MT 800-434-4190

Port Arthur, TX 409/721-5305

Pflugerville, TX 512/251-0013

Eugene, OR 800-826-9811

Billings, MT 800-735-2589

Corpus Christi, TX 361/884-8275

Buffalo, TX 903/322-4535

Anderson, CA 530/378-0881

Page 18 • December 15, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Lokotrack LT106 Jaw Plant Features Increase Efficiency, Safety, Mobility Metso’s Lokotrack LT106 jaw plant has new features designed to deliver higher productivity at lower cost per ton. The updated LT106 has a robust crusher drive and heavyduty air filtration system with pre-cleaner requiring less maintenance. High-inertia flywheels mean fewer power peaks, so the engine consistently operates at optimum speed, lowering fuel consumption by as much as 25 to 30 percent, according to the manufacturer.

Setting Standards in Mobility The Lokotrack LT106’s compact dimensions and agility on tracks mean lower transport costs between and within crushing sites. The chassis design, with good clearance on both ends, enables safe and easy loading onto a trailer. The unit is ready for crushing or transport within minutes, due to the feed hopper with a safe hydraulic securing system and radial side conveyor.

Improved Performance Safe and Easy to Operate The LT106 is built around Metso’s C106 jaw, featuring a New design features, such as engine and flywheel com42 by 28 in. (106 by 71 cm) crushing chamber for high out- posite covers, together with large service platforms and put. The LT106 also is fitted with an aggressive vibrating accessibility make daily operations safe and easy. feeder. An advanced Metso IC700 “There are so many things you control and monitoring system with can point to that make this new ultrasonic level sensor automatically Lokotrack LT106 better than the preadjusts feed rate for peak productivivious one,” said Tommi Lehtonen, ty. Metso vice president, mobiles. “It is A new hydraulic system, coupled completely re-engineered, design with an environmentally friendly, work was driven by our close relalow-emission Cat C9.3 Tier IV or C9 tionship with our customers, and the Tier III engine and high-inertiaflyresult is a more efficient, reliable and wheels, offers fuel efficiency of 4 to productive machine. Naturally, we 6 gal. (17 to 22 L) per hour on avermade it the safest machine to operate age without compromising process in the industry.” flexibility, safety or durability of the Feed hopper sides and locking mechaFor more information, visit nism are hydraulically operated. hydraulic drive. www.metso.com.

www.petersoncat.com Northern California 888-738-3776 Oregon/Southern Washington 800-452-7676 Chico, CA Redding, CA Fortuna, CA Willows, CA Willits, CA Santa Rosa, CA San Martin, CA San Leandro, CA Eugene, OR North Bend, OR Klamath Falls, OR Redmond, OR Medford, OR Albany, OR Portland, OR Salem, OR The Dalles, OR Longview, WA

www.wagnerequipment.com Albuquerque, NM 505-345-8411 Aurora, CO 303-739-3000 Burlington, CO 719-346-7880 Colorado Springs, CO 719-635-1669 Durango, CO 970-259-2001 El Paso, TX 915-821-7651 Farmington, NM 505-327-5331 Grand Junction, CO 970-242-2834 Hayden, CO 970-276-3781 Hobbs, NM 575-393-2148 Pueblo, CO 719-544-4433 Windsor, CO 970-278-1750

The LT106 jaw plant has new features that deliver higher capacity and lower operating costs.

www.warrencat.com 866-292-7736 P.O. Box 60662 Midland, TX 79711 432-571-4200 Abilene, TX 325-692-1600 Amarillo, TX 806-335-1511 Lubbock, TX 806-745-4495 Odessa, TX 432-332-1681 San Angelo, TX 325-655-1100 Wichita Falls, TX 940-767-4384 Oklahoma City, OK 405-947-6771 Tulsa, OK 918-627-4500

www.louisianacat.com 3799 W. Airline Hwy Reserve, LA 70084 985-536-0946 Fax: 985-536-0950 Alexandria 318-443-2577 Bossier City 318-746-2341 Hammond 985-340-2820 Lafayette 337-837-2476 Lake Charles 337-439-3601 Monroe 318-323-1345 Prairieville 225-673-3480 Reserve 985-536-1211

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 15, 2012 • Page 19

www.holtcat.com 800-275-4658 Austin, TX • Bridgeport, TX Corpus Christi, TX • Fort Worth, TX Irving, TX • Laredo, TX Lewisville, TX • Longview, TX North Dallas, TX • Pflugerville, TX San Antionio, TX • Sonora, TX Texarkana, TX • Tyler, TX Victoria, TX • Waco, TX Weslaco, TX

BIG. Bad. fast. strong. AVAILABLE.

www.johnson-machinery.com Riverside, CA 951-686-4560 Fontana, CA 909-574-6601 Indio, CA 760-342-1597 Murrieta, CA 951-696-1063 Hesperia, CA 760-947-0967

www.mustangcat.com Houston, TX 713-460-2000 Beaumont, TX 409-892-8412 Bryan, TX 979-775-7368 Bryan, TX 979-775-0639 Channelview, TX 281-452-7368 Conroe, TX 936-756-1110 El Campo, TX 979-543-3389 Freeport, TX 979-233-7368 Houston, TX 713-462-9993 Houston, TX 713-228-7368 LaMarque, TX 409-935-7000 Lufkin, TX 936-639-5551 Lufkin, TX 936-632-6775 Nederland, TX 409-722-7368

The MX457 130K lbs. 300 hp. 13,430lb@60’. 63’ 5” reach. Innovative American made no compromise

Join the revolution 715-395-6060

www.exodusmachinesinc.com

superior, wisconsin

Page 20 • December 15, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Need to speed up the composting process by mixing, aerating and separating?

See how we do it! Go to www.remu.fi/info, and we will mail you a flash drive to show our solution.

REMU USA Inc. usa@remu.fi Eric +1 888 600 0018 www.remu.fi

L L I H E H T F O G N I K www.superior-ind.com

At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determination and energized by progress. How can we help you?

Official dealer partner in Texas, Louisiana and Mississippi.

Official dealer partner in Northern California.

McCOURT & SONS EQUIPMENT, INC.

COMPASS EQUIPMENT INC.

5141 Hwy 71 West LaGrange, TX 78945 979-242-5298 888-838-9252 www.portablescreen.com

4688 Pacific Heights Road Oroville, CA 95695 530-533-7284 530-533-8610 www.compassequip.com

POWER EQUIPMENT CO. 500 E. 62nd Ave. Denver, CO 80216 800-883-9284 www.power-equip.com Locations: Denver, CO Colorado Springs, CO Grand Junction, CO Casper, WY Albuquerque, NM

GIVE. ADVOCATE. VOLUNTEER.

LIVE UNITED

™

Want to make a difference? Find out how at LIVEUNITED.ORG.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 15, 2012 • Page 21

The The new new LLokotrack okotrack LT120 LT120 jaw jaw plant plant

Reliable R eliable eliab crushing po power wer The Lok otrack LT120, Metso’s latest jaw plant, combines solid experience with a totally new way of think ing. The result is reliable crushing power and more uptime for you. The dependable, all-new C120 jaw crusher, with its generou us 47 x 34 in. ffeed eed opening, boosts productivity in the toughest applications. Safe and simple to operate, compact and easy to transpor t. Learn more by contacting a Metso distributor near you. E-mail: m minerals ine .nam@metso.com www.m .metso mets .com

CRISP INDUSTRIES, INC.

WESTATE

COMPASS EQUIPMENT

323 Energy Way • Bridgeport, TX 76426 940-683-4070 • 800-315-0871 • Fax: 940-683-2181 www.crispindustries.com • info@crispindustries.com New Braunfels, TX 830-625-6822

P.O. Box 50370 • Billings, MT 59105 800-999-6676 • Fax: 406-373-6553 www.westate.com

4688 Pacific Heights Rd. • Oroville, CA 95695 530-533-7284 • 530-533-8610 • Fax: 530-533-7657 www.compassequip.com

Page 22 • December 15, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

U-SCREEN C-36 NEW!

Dealer Inquiries Invited Designed For Skid Steers, Loaders & Excavators •Screen 500 to 600 yards per day •Any Size Screen Available •Stacking Height: 9’ •Width: 5’ 6” •Length: 28” •6’ x5’ Screening Deck

•Easy Change Screens •25 HP Kubota Diesel Power •Hydraulically operated Screen •Hydraulic trailer axle •30” Hydraulic Conveyor Belt •Towed with 1 Ton Vehicle

www.u-screen.com 905 Turnpike Street • Canton, MA 02021

1-866-USCREEN (781) 828-9100 • Fax: (781) 821-8807

The Warrior 1400X can be fitted with either a Tier III/Stage 3A Caterpillar C4.4 ATAAC — 4 cylinder diesel engine developing 120 hp (90 kW) at 1800 rpm, or a Tier IVi/Stage 3B Caterpillar C4.4 - 4 cylinder diesel engine developing 110 hp (82 kW) at 1800 rpm.

Powerscreen Warrior 1400X Offers Easier Serviceability Powerscreen, a provider of mobile crushing and screening equipment, launched the new Warrior 1400X screen. Damian Power, Powerscreen global product director said: “The new Powerscreen Warrior 1400X offers improved performance, lower operating costs and easier serviceability while building on the reliable foundation of our classleading Warrior 1400 scalper.” The 1400X has been designed with economy in mind. With reduced engine running speed and enhanced hydraulics, the 1400X offers a reduction in fuel consumption of up to 15 percent in comparison to its predecessor. This can translate into a substantial financial saving for customers over the lifetime of the machine. Improved versatility and design specifications are other key achievements of the Warrior 1400X, with the screening angle range widening of 13 to 19 degrees. Standard stockpiling capacity on all conveyors has increased by up to 25 percent. With the chassis riser option and the telescopic side conveyor option, the fines and mid-grade stockpiling capacity is increased to more than double that of a standard

Warrior 1400, according to the manufacturer. Time required for set-up and shutdown is faster than the previous model, which will be of particular benefit to contractors. Serviceability features include a screen box raise function and the ability to raise the collection conveyor. Optimal chute design in conjunction with the new feeder undertray slide-out feature will minimize any potential spillage and reduce any harmful material build-up around the machine. The Warrior 1400X now boasts improved mobility with a two speed tracking system as standard. The high speed mode is further enhanced with automatic engine speed ramp-up making the 1400X the fastest tracked machine in its range, according to the manufacturer. The Warrior 1400X can be fitted with either a Tier III/Stage 3A Caterpillar C4.4 ATAAC — 4 cylinder diesel engine developing 120 hp (90 kW) at 1800 rpm, or a Tier IVi/Stage 3B Caterpillar C4.4 — 4 cylinder diesel engine developing 110 hp (82 kW) at 1800 rpm. For more information, visit www.powerscreen.com.

Attachments

SECTION

Pages 23-25

HCT’s Aftermarket Hydraulic Kits Meet Job Site Challenges For many years, hydraulic excavators were mostly dirt-digging machines. Over time, however, a huge number of attachments have been developed that have exponentially expanded the capabilities of the excavator. These attachments, which include items such as breakers, shears, thumbs, brush-cutters, augers and compactors, all require the installation of one or more additional (or auxiliary), hydraulic circuits that must be integrated into the existing hydraulic system. In the early days, the owner of such an attachment would have to use his own ingenuity to obtain this auxiliary capability. It was not unusual to see draped hoses tied up with wire, or even Schedule 80

threaded pipe, to supply the attachment. Leaking fluid and frequent downtime were commonplace, and perhaps even expected. Safety was sometimes sacrificed for expediency. Today, such methods are not acceptable. Safety and environmental concerns are paramount. Leaks and failures that were once viewed as unavoidable annoyances are now viewed as serious events with consequences. HydrauliCircuit Technology (HCT) has become a leading provider of aftermarket hydraulic kits, engineered to withstand the job site challenges that come with attachment operations. Whatever the nature of the job, whether construction, quarry or demolition-related, the auxiliary circuits are subjected to stresses more extreme than any other on an excavator. The high flows, high pressures, fast cycle times, pulsation and external shock are factors that must be considered in the cir-

HCT tube-hose connections include industry-standard SAE-approved O-ring Face Seal (ORFS), and Code 62 4-bolt flange connections. Tubing is custom-fabricated and bent for each excavator model.

cuit design phase. The experienced design engineers at HydrauliCircuit Technology have continuously upgraded hydraulic components in their kits for many years, as new and better technology became available. One highly visible

HydrauliCircuit Technology (HCT) has become a leading provider of aftermarket hydraulic kits, engineered to withstand the job site challenges that come with attachment operations.

example of this philosophy is the use of an extremely heavy-duty tubing and clamp system that reduces potential leak points, and provides the most durable circuit available, exceeding, in most cases, the strength of existing machine components, according to the manufacturer. HCT tube-hose connections include industry-standard SAE-approved O-ring Face Seal (ORFS), and Code 62 4-bolt flange connections. Tubing is custom-fabricated and bent for each excavator model. Tube ends are Pulse-MIG welded for superior strength. A wide array of customdesigned forged steel tube clamps ensure that the tubes will not move under severe stress. Components are protected with UV-resistant powder-coating to withstand harsh environments. Navin Baliga, president of HCT, pointed out that some kit manufacturers use thin-walled flared/ferrule connections. “This might be suitable for industrial applications, but not for use on an excavator,” Baliga stated. “With the demanding appli-

cations placed on excavators, especially in the demolition industry with the use of second and thirdmember shears, keeping the integrity of all the hydraulic connections is key for any machine owner. Designing a long tube with multiple sections might enable other manufacturers to pull generic pieces from stock, and to ship quickly. Unfortunately, this practice greatly increases the number of leak points and the resulting connections are disliked by some service technicians. HydrauliCircuit Technology eliminates potential leak points by connecting the tube ends directly to the hose assembly and do not require a male-to-male union connector to achieve this.” Bobby Hudson, national sales manager of HCT, added, “HCT components may take a day longer to build, and may cost more to ship overnight, but in the long run, customers benefit from the value in a product that is designed and built to operate safely and to last for see KITS page 24

Page 24 • December 15, 2012 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

HCT Has the Right Connections Leaking hydraulic fluid can be a minor annoyance, or a major catastr ophe. Either way catastrophe. way,, HCT connections minimize the chance for leaks to develop. U OEM style ORFS or CD62 4 bolt flange connections

U Higher safety standar standards ds U Efficient designs with fewer connections, rreduce educe the number of potential leak points

Strong Tubing, Clamp System Reduces Potential Leak Points Welded W elded tube ends s for maximum str strength rength ength and durability durability..

www.hctkits.com www .hctkits.com 250 Fluid Drive McDonough, GA 30253

1.888.603.0080

KITS from page 23

years.” Customers, such as Phil Spiers, service manager at JESCO, a multi-state Deere dealer in the northeast, agree that HCT’s components are the way to go. “We rely only on HydrauliCircuit Technology for our hydraulic kits,” Spiers said. “They are custom built for our application and easy to install. Their tech support department is knowledgeable and always ready to support our service department.” William Neely, Cowin Equipment Company Inc., also is an HCT client. “We rely on HydrauliCircuit Technology as one of our supply sources for hydraulic kits on excavators and tractor loader backhoes. The quality of the components, and the heavy-duty design of their hydraulic kits provides us with just one of the competitive edges that's needed in today's economic climate,” said Neely. Texas-based RB Everett Company is another company that has relied on HydrauliCircuit Technology for years. Dean Henderson, company vice presi-

dent, said, “We like doing business with them. We like the fact that they understand our commitment to quality and customer service. The heavy-duty components used in their kits sets them apart from their competition. We service a demanding industry and customizing and adapting to the needs of our customers is a key to our success. HCT understands our industry and has worked with us on meeting this challenge head-on.” HydrauliCircuit Technology has been producing auxiliary hydraulic kits for more than 15 years, with manufacturing and installation facilities near Atlanta. HCT’s kits are preferred by end-users, dealers and OEMs across North America. All kits include comprehensive, easy-to-follow instruction manuals that contain detailed information with drawings, photos, proper tightening and routing techniques and safety information. For more information, call 888/603-0080, or visit www.hctkits.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • December 15, 2012 • Page 25

Page 26 â&#x20AC;¢ December 15, 2012 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ December 15, 2012 â&#x20AC;¢ Page 27

The new LBX Link-Belt X3 series of excavators offer a variety of features that combine to make WKLV WKH PRVW IXHO HIÂ¿FLHQW DQG HQYLURQPHQWDOO\ IULHQGO\ /LQN %HOW VHULHV HYHU Â&#x2021; (QKDQFHG K\GUDXOLFV LQFUHDVH VSHHG DQG HIÂ¿FLHQF\ Â&#x2021; 7KUHH LGOH PRGHV KHOS WR HOLPLQDWH IXHO ZDVWH Â&#x2021; (3$ FHUWLÂ¿HG 7LHU $ FRPSOLDQW ,VX]X HQJLQHV Â&#x2021; (DV\ PDLQWHQDQFH ZLWK JURXQG OHYHO DFFHVV WR DOO Â¿OWHUV Â&#x2021; 6HWXS DQG WUDFN VHUYLFH LQWHUYDO WLPHV RQ GLIIHUHQW LWHPV ZLWK RXU QHZ +' Â´ /(' PRQLWRU Â&#x2021; 6HW DX[LOLDU\ K\GUDXOLF Ã&#x20AC;RZV DQG SUHVVXUHV IURP LQVLGH WKH FDE PRQLWRU IXHO XVDJH DQG REVHUYH WKH QHZ UHDU YLHZ FDPHUD RQ WKH FRORU /(' PRQLWRU Â&#x2021; 2QH SLHFH UHLQIRUFHG WXUQWDEOH EHDULQJ WXE ZHOGHG RQ WKH WRS DQG ERWWRP IRU LQFUHDVHG VWUHQJWK Â&#x2021; 1HZ ODUJHU UHLQIRUFHG 5236 FHUWLÂ¿HG FDE ,Q DGGLWLRQ WR WKHVH LPSURYHPHQWV DOO ; H[FDYDWRUV FRPH ZLWK WKH EHVW VWDQGDUG ZDUUDQW\ LQ WKH LQGXVWU\

Visit your Link-Belt excavator dealer today and experience the X Factor for yourself. ; 0DFKLQH 6SHFLÂ¿FDWLRQV 210 X3

250 X3

250 X3 LF

300 X3

350 X3

470 X3

47,840 lbs

55,336 lbs

61,950 lbs

65,918 lbs

80,028 lbs

111,554 lbs

Arm:

9 ft 8 in

9 ft 10 in

26 ft 3 in

10 ft 5 in

10 ft 8 in

11 ft 1 in

Bucket Weight:

1,440 lbs

1,790 lbs

750 lbs

1,940 lbs

2,580 lbs

3,350 lbs

160 hp

177 hp

207 hp

266 hp

362 hp

Max. Dig Depth:

21 ft 10 in

22 ft 8 in

47 ft 9 in

23 ft 4 in

24 ft 1 in

24 ft 10 in

ISO Breakout Force:

24,730 lbf

29,000 lbf

9,060 lbf

34,400 lbf

40,020 lbf

46,310 lbf

Bucket Digging Force:

34,170 lbf

39,120 lbf

18,570 lbf

42,760 lbf

55,750 lbf

60,700 lbf

Weight:

Horsepower:

Swing Torque:

47,204 lbf-ft

55,243 lbf-ft

51,482 lbf-ft

68,151 lbf-ft

Bucket Range:

.61 - 1.75 yd

.76 - 2.43 yd

.50 - .86 yd

.76 - 2.43 yd 1.08 - 2.93 yd3 1.58 - 4.05 yd3

82,607 lbf-ft 110,634 lbf-ft

Page 26 â&#x20AC;¢ December 15, 2012 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ December 15, 2012 â&#x20AC;¢ Page 27

Visit your Link-Belt excavator dealer today and experience the X Factor for yourself. ; 0DFKLQH 6SHFLÂ¿FDWLRQV 210 X3

250 X3

250 X3 LF

300 X3

350 X3

470 X3

47,840 lbs

55,336 lbs

61,950 lbs

65,918 lbs

80,028 lbs

111,554 lbs

Arm:

9 ft 8 in

9 ft 10 in

26 ft 3 in

10 ft 5 in

10 ft 8 in

11 ft 1 in

Bucket Weight:

1,440 lbs

1,790 lbs

750 lbs

1,940 lbs

2,580 lbs

3,350 lbs

160 hp

177 hp

207 hp

266 hp

362 hp

Max. Dig Depth:

21 ft 10 in

22 ft 8 in

47 ft 9 in

23 ft 4 in

24 ft 1 in

24 ft 10 in

ISO Breakout Force:

24,730 lbf

29,000 lbf

9,060 lbf

34,400 lbf

40,020 lbf

46,310 lbf

Bucket Digging Force:

34,170 lbf

39,120 lbf

18,570 lbf

42,760 lbf

55,750 lbf

60,700 lbf

Weight:

Horsepower:

Swing Torque:

47,204 lbf-ft

55,243 lbf-ft

51,482 lbf-ft

68,151 lbf-ft

Bucket Range:

.61 - 1.75 yd

.76 - 2.43 yd

.50 - .86 yd

.76 - 2.43 yd 1.08 - 2.93 yd3 1.58 - 4.05 yd3

82,607 lbf-ft 110,634 lbf-ft

Trucks & Trailers

SECTION

Pages 28-31

Mack Pinnacle Delivers Christmas to U.S. Capitol The 2012 Capitol Christmas tree was illuminated in an official lighting ceremony Dec. 4 on the west lawn of the U.S. Capitol, following a 5,300mi. multi-week journey on the brawn of a Mack Pinnacle model. Speaker of the House John Boehner (R-Ohio), accompanied by 17-year-old Ryan Shuster, flipped the switch, lighting the 73-ft. Engelmann Spruce and marking the official beginning of the holiday season in D.C. Shuster, from Colorado Springs, Colo., was randomly selected from 1,300 youths throughout the state who created more than 5,000 handmade ornaments for the tree. Decorated with approximately 10,000 low-energy LED lights, the tree will be lit every evening from dusk until 11 p.m. throughout the holiday season. The tree was hauled in a special trailer and pulled by a SmartWay-certified Mack Pinnacle model driven by former U.S. Sen. Ben Nighthorse Campbell. A second Mack tractor hauled the ornaments and dozens of companion trees that will decorate other government buildings in Washington. Distinctively decaled with a determined Bulldog pulling a tree across a snow-covered landscape, the Mack Pinnacle is equipped with a near-zero emissions MP8 engine with Mack ClearTech SCR technology and an advanced mDRIVE automated manual transmission, which optimized fuel efficiency and performance by assuring that the truck was always in the right gear. The mDRIVE continually monitored changes in grade, speed, acceleration and weight as the tree traveled over mountains, through small towns and on busy highways on its way to Washington. During its three-week trip, the Pinnacle tractor

Kenworth has added a PeopleNet pre-wire option for the Kenworth Class 8 T660, T800 and W900.

The 2012 Capitol Christmas tree shines brightly after being officially lit for the holiday season during a special ceremony Dec. 4.

braved whiteout conditions through mountain passes, freezing temperatures and tight maneuvering in small towns and big cities. Throughout, the Mack truck handled all challenges with ease. “Hauling the Capitol Christmas tree this year has been a special assignment that we have really enjoyed,” said John Walsh, vice president of marketing for Mack Trucks. “This is a job our trucks are built for — demanding hauls across all kinds of terrain with very important cargo. We are pleased that the U.S. Forest Service and Choose Outdoors trusted this job to Mack, and we look forward to again hauling the Capitol Christmas tree in 2013.” The tradition of the Capitol Christmas Tree, also known as “The People’s Tree,” began in 1964. National forests rotate the responsibility each year of providing a tree that will stand on the west lawn of the U.S. Capitol as a gift to the nation.

PeopleNet Pre-Wire Option Added for Kenworth Models Kenworth has added a PeopleNet pre-wire option for the Kenworth Class 8 T660, T800 and W900. PeopleNet is a leading provider of innovative and integrated onboard computing and mobile communications systems for effective fleet management. The company provides fleets with realtime automated tools that can help to enhance safety and compliance, reduce operating costs and improve customer service. Automatic vehicle location, lane departure notification, onboard event recording, remote vehicle shutdown, speed monitoring, and vehicle management are some key PeopleNet applications available with its onboard computer. These and other PeopleNet technology tools and services can be utilized by fleets to promote efficient and cost-effective transportation. The Kenworth option includes an adaptor for J1939 to communicate to J1708 for use by the system. The pre-wire is compatible with all versions of the display units. The new option also includes the harness, antenna and roof bracket. The connector locations are located on the lefthand sleeper tool box on Kenworth AERODYNE sleepers and behind the right-hand side of

the driver seat on day cabs, extended day cabs and modular sleepers. For more information, visit www.peoplenetonline.com.

The company provides fleets with real-time automated tools.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • December 15, 2012 • Page 29

Mack Truck Joins U.S. Forest Service to Provide Training Recognizing that cultivating a strong pipeline of qualified drivers is vital to the future success of the trucking industry, Mack Trucks partnered with the U.S. Forest Service job corps Civilian Conservation Centers (JCCCC) to offer a ride-along opportunity for a Job Corps student. Kandy Kilbreth, of Poplar Bluff, Mo., rode along in a Mack Pinnacle model from Warrenton, Mo., to St. Louis, Mo. during a leg of the 2012 Capitol Christmas Tree tour. The opportunity was designed to help Kilbreth determine if the pursuit of a commercial driver’s license and a career as a truck driver is the right choice for her. Kilbreth, who is enrolled in the Welding Career Technical Training program at Mingo JCCCC in Puxico, Mo., has expressed interest in truck driving as a career. “It was a great experience to ride along in the Mack Pinnacle during the Capitol Christmas Tree tour,” Kilbreth said. “I think I would enjoy driving a truck for a living, and the experience of riding along with a professional driver helped me better understand what it would actually be like to be a driver.” According to a November 2012 report released by the American Trucking Associations, there will be more than 200,000 unfilled positions in the trucking industry for qualified truck drivers by 2022. “Since trucks haul nearly 100 percent of consumer goods, Mack believes it’s critical that we do all we can to help people get excited about a career in truck driving,” said John Walsh, Mack vice president of marketing. “One way to do that is to offer students like Kandy the opportunity to ride in a big rig.” Organized by the U.S. Forest Service, the

ride-along took place during the 2012 Capitol Christmas Tree tour, which is traveling from the White River National Forest in Colorado to the U.S. Capitol lawn in Washington, D.C. The Mack Pinnacle model, fitted with a special trailer, is hauling a 73-ft. tree, which will be displayed on the U.S. Capitol lawn. Mack also provided a second Mack Pinnacle, which is transporting 100 companion trees to be displayed throughout the Capitol. “Forest Service Job Corps Civilian Conservation Centers offer hands-on training in over 30 vocational trades. Job Corps centers provide the education, vocational instruction, and job skills training necessary to obtain gainful employment and earn a living wage,” said Tony Dixon, Forest Service Job Corps national director. The Mingo JCCCC is a residential vocational and educational training program serving students ages 16 to 24. Job Corps is the nation’s largest residential, educational and career technical training program for young people in the United States. The Sen. Ben Nighthorse Campbell, official driver of the Mack Pinnacle bound for the Forest Service operates 28 JCCCCs nation- U.S. Capitol, shares his experiences as a truck driver with Kandy Kilbreth, a U.S. wide in partnership with the U.S. Forest Service Job Corps student. Department of Labor. “The Job Corps program is impressive because of its focus on vocational and technical skills, both of which are assets for American economic growth,” Walsh said. “Mack is proud to partner with the Forest Service on this work-based learning project, and we value the opportunity to help the next generation understand how essential the trucking industry is to our economy.” For more information, visit www.macktrucks.com.

Weather Guard Protect-A-Rail Cab Protectors Height Reduced Weather Guard Truck Equipment has reduced the overall height of Protect-a-rail cab protectors to make them more compatible with current full-size truck model year designs. In turn, two mounting brackets have been modified to allow the new Protect-arail cab protectors to be installed with the Ford F-250/F-350 super duty and the Dodge Ram. Protect-a-rail cab protectors are designed to protect the cab of the pickup from shifting loads in the cargo area and provide heavyduty cab protection. “The new Weather Guard Protect-a-rail

cab protectors deliver improved safety and durability, along with an attractive appearance for today’s trucks,” explained Mike Sover, Weather Guard senior product manager. In order to reflect these changes, new part numbers have been established. Part numbers for models 1904, 1905, 1906, 1907, 1912, and 1915 will be discontinued. The new Protect-a-rail cab protectors and mounting brackets will still be compatible with all older model year vehicles. For more information, visit www.weatherguard.com.

Page 30 • December 15, 2012 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • December 15, 2012 • Page 31

East Improves Integrated Stairway for Flatbed Trailers Securing a flatbed load often requires climbing up on — and down from — the deck of the trailer. That’s not easy, and can even be potentially dangerous. To provide a simpler, easier and safer entrance to and exit from the flatbed deck, East Manufacturing first introduced an optional integrated stairway a few years ago. Now East has improved this option by adding a locking door enclosure that allows for additional lights and license plate mounting, while giving the rear end a more custom appearance. “The East integrated stairway is a smart safety option for flatbed trailers,” said Bill McKenzie, product manager of platform products. “When open, the deck lid locks securely in the upright position via double rods that slide into two specially designed receivers. The first Bill McKenzie of two handrails is located under Platform Products the lid, providing a handy 45 degree vertical handhold that’s above deck height. The second handrail is built next to the steps, which are made of pooch-punched aluminum for both drainage as well as a skid-resistant surface.” In the down position, the deck lid latches securely to prevent bouncing during transit. The deck lid is load bearing, so the trailer loses zero deck area because of the stairs. Now East has added a new door that can be locked and fitted with ID lights that comply with federal DOT requirements, as well as a lighted license plate mounting area. The integrated stairway is all East Manufacturing has improved its flatbed integrated stairway option by adding aluminum, so no extra weight is added to the trailer. a locking door enclosure that allows for additional lights and license plate mountFor more information, call 888/405-3278 or visit www.eastmfg.com.

“The East integrated stairway is a smart safety option...”

ing, while giving the trailer rear end a more custom appearance.

TBEI Appoints Campbell New General Manager of Ox Bodies TBEI Inc., manufacturers of dump truck bodies, equipment and end dump trailers, has named Terry Campbell as its new general manager of Ox Bodies Inc. where he will have direct responsibility over all operations and sales at its Fayette, Ala., facility. Before joining TBEI Inc., Campbell oversaw operations as general manager of the Kidron division of V.T. Hackney Inc. in the manufacture of specialized refrigerated trailers and bodies. Prior to V.T. Hackney, he worked at Transcraft Corporation of Wabash National overseeing three plants and two divisions in the manufacture of over-the-road flatbed trailers, laminated oak flooring for trailers, and on and off-road dump bodies for coal field operations. Campbell brings more than 20 years of engineering and management experience in the heavy metal fabrication, transportation and trailer industries. For more information, call 507/726-2728 or visit www.tbei.com.

Page 32 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Vena Named Hawthorne Cat Pacific Region Sales Manager Hawthorne Cat has recently promoted Greg Vena to Pacific Region sales manager. He will lead the sales, product support and rental operations in Hawaii and Guam. “Greg’s extensive management experience as corporate product support manager is perfectly suited for the day-to-day management of the Hawaii and Guam operations,” said Dave Ness, vice president sales and marketing. “Vena’s product support sales responsibilities in San Diego will transition to David Dean, San Diego region sales manager. David has done an outstanding job at Hawthorne Cat and will continue to build on Mr. Vena’s success,” Ness continued. “I am very excited about my new responsibilities,” said Vena. “While I will be based in San Diego, I will be travelling extensively throughout the Pacific Region to expand our sales and rental business and ensure our operation is reaching its full potential.” For more information, visit www.pacific.hawthornecat.com.

Calif. Bullet Train Route to Cross Earthquake Faults

Author ized Doosan Dealer s

A ARIZONA RIZONA

TE X A S TEXAS

Ditch Witch of Arizona

H & V Equipment Ser vices, Inc.

Phoenix 602-437-0351 888-316-3242

San Antonio 800-933-5623 hvequipment.com

Tucson 520-579-0261

R.B. Everett & Co.

ditchwitchaz.com

Arling ton 817-299-0010

C CALIFORNIA ALIFORNIA

Pasadena 281-991-8161

Bejac Corporation

rbeveret t.com

Placentia 714-528-6224 800-77-BEJAC

Texas Timberjack, Inc.

bejac.com

Lufkin 936-634-3365

RGW Equipment Sales, LLC

Jasper 409-384-4611

Livermore 925-606-2450

texastimberjack.com

rg wequipment.com

BULLET from page 1

California hasn’t considered such an immense north-south rail link since the 1870s, when Southern Pacific Railroad bored through the Tehachapis. Thousands of Chinese laborers dug and dynamited the way up and through the mountains, creating 18 tunnels on a route that climbed more than 4,000 ft. (1,219 m). Today, only freight trains use the route. Passenger service through the Tehachapis was discontinued in 1971. The high-speed train won’t be able to use the twisting loops of that route; it will need a straighter, flatter path to maintain its speed. A corridor for high-voltage lines must be built through the Tehachapis to supply the train, which will need an estimated 2.7 million kilowatt hours of electricity daily, equal to about a quarter of the average daily output of Hoover Dam. On the way between the Central Valley and the south, the bullet train could zoom across the Mojave Desert, pass through an 8mi. (12.9 km) long tunnel under the canyons of Santa Clarita north of downtown Los Angeles and race through northeastern San Fernando Valley neighborhoods, which may

require removing some homes and businesses from the route. It would go underground near Glendale, run under the Los Angeles River and probably would hit street level again around Chinatown. The exact route won’t be chosen until next year but about 200 people already are working on the southern segment. Among other things, the tracks will have to cross a halfdozen earthquake faults, including the infamous San Andreas, which could produce a 7.5-magnitude temblor. The chances of a quake occurring while a train is going over a fault is “very small” but big temblors could cause a derailment, said C. Michael Gillam, a vice president at engineering company Parsons Brinckerhoff, which is overseeing the design of the southern segment. Ideas being considered are reinforcing viaducts and creating a system that automatically slows or stops trains during quakes. While the engineering challenges are daunting they are not unique: Switzerland is building a 35.4-mi. (56.7 m) rail tunnel under the Alps. And China has a highway bridge 1,627 ft. (496 m) high.

UTAH U TAH OKLAHOMA OKLAHOMA

Mesco Inc.

H & E Equipment Ser vices

Nor th Salt Lake 801-936-3890 888-854-4529

Tulsa 918-445-2666 Oklahoma Cit y 405-789-7368 he-equipment.com

doosan.mescoequipment.com

WASHINGTON W ASHINGTON Cascade Tr Trader Inc. Chehalis 360-748-1182 doosan.cascadetrader.net

Farmers Equipment Company Lynden 360-354-4451 Burling ton 360-757-6081 far mersequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 33

Parts. 48 hours. Guaranteed. or machine-critical parts, you’re losing money—so Doosan will If you’re waiting ffo ship any machine debilitating part in 48 hours or less. If for some reason we can’t, we’ll pay for a rental. It’s as simple as that. D oosan D elivers: P PA ARTS Doosan Delivers: PARTS The 48-Hour Par ts Guarantee is subject to carrier deliver y restrictions and/or governmental agency delays.

Contact your local Doosan dealer fo for more information.

D o o s a n a n d t h e D o o s a n lo g o a r e r e gis t e r e d t r a d e m a r k s o f D o o s a n C o r p. in t h e U ni t e d S t a t e s a n d v a r io u s o t h e r c oun trie s around t h e world. © 2 0 12 Doo s a n Inf r a c or e Cons tr u c tion Equipm e nt A m eric a . A ll righ t s re s er ve d. | 1112 6 6 5

Page 34 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Planning Pays Off for Ritchie in China RITCHIE from page 1

Tianzhu Free Trade Zone (Shunyi, Beijing) in preparation for this first unreserved public auction in China. Strategically located within minutes of Beijing Capital International Airport, the Tianzhu Free Trade Zone is connected to one of China’s largest roll-on, roll-off ports in Tianjin. “We have used Ritchie Bros. auction services literally all over the world,” said Sam Farley, used equipment manager, AMECO U.S.A., who has been buying and selling heavy equipment at Ritchie Bros. auctions for many years, and during 2011 has bought and sold at Ritchie Bros. unreserved auctions in the Middle East and North America. “Their method of advertising, their customer base, the flyers that they send out, their e-mail advertising, their internet support services — are without equal in the industry.” Showcasing China to the World: the Unreserved Public Auction Ritchie Bros. has been conducting unreserved public auctions since the company was founded in 1958. At an

unreserved auction each item sells on auction day to the highest bidder — regardless of price — with no minimum bids or reserve prices. Sellers are not allowed to bid on their own equipment to drive up the price. Interested buyers can bid on equipment on auction day at the auction site, or live and online or they can also place a proxy bid. “We strongly believe in the unreserved auction process as it is the most fair and transparent way for equipment buyers and sellers to conduct business,” said Peter Blake, CEO, Ritchie Bros. Auctioneers. “As a buyer, you can be confident that the item you want to buy will sell on auction day to the highest bidder — regardless of price. This hallmark of our business has helped build confidence and trust among our customers. And as a seller, you can be certain that you will get global fair market value for your equipment on auction day, since we invite the world to the sale of your equipment.” In 2011, the company sold $3.7 billion of equipment at 339 unreserved industrial and agricultural auctions around the world.

Ritchie Bros. has been working with Chinese buyers and sellers for many years. The company’s current customer base includes Chinese original equipment manufacturers (OEMs) and construction companies that have been selling their equipment at auctions overseas and learning about the international equipment market. Ritchie Bros. also has been working with Chinese government officials for a number of years to acquire the proper permits for holding auctions in China. “We established our presence in China in 2004,” added Chris Edwards, Ritchie Bros. general manager of China, Korea and Mongolia. “We have been learning China’s market, customer needs and behaviors, regulations and business processes. Our goal has always been to be a good, educated citizen in China.” There are currently 81 upcoming auctions on the Ritchie Bros. auction calendar, including unreserved auctions in Australia, Spain, France, the United Arab Emirates, Mexico, the United States and Canada. For more information, visit www.rbauction.com.

Cat Features More Fuel-Efficient Wheel Loader, Hybrid Excavator, Tier IV Final PEORIA from page 8

Press demoed the 336E H, not on a proving ground, but as a 3D hologram. Testing and building Cat products includes creating 3D machines and environments, as well as a suite of other productivity-enhancing technologies. The hologram is displayed in a room, called “The Cave.” The 3D glasses even monitor head movement, and adjust the image accordingly. Cat c9.3 Acert Caterpillar also introduced the next generation of the Cat C9.3 Acert industrial engine, which is designed to meet U.S. EPA Tier IV Final/EU Stage IV emission standards. The new engine is a six-cylinder, 9.3 L platform that produces power density with ratings from 300-400 hp (224-298kW). It is equipped with a fullyintegrated clean emission module (CEM), which includes a diesel oxidation catalyst (DOC), diesel particulate filter (DPF), and selective catalytic reduction (SCR) technology. “Utilizing a Cat common rail fuel system and new aftertreatment technology, the Tier IV Final/EU Stage IV C9.3 Acert improves fuel consumption by up to four percent compared to the current Tier IV Interim/Stage IIIB model,” said Mike

Reinhart, industrial power systems marketing manager. The Clean Emission Module simplifies OEM aftertreatment installation with a flexible design that allows mounting in horizontal or vertical configurations. This allows Cat’s existing customers to easily transition from Tier IV Interim/Stage IIIB to Tier IV Final/Stage IV. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT Oklahoma City, OK 405/948-6565 Tulsa, OK 918/835-7200 www.oklahomaterritoryequipment.com

BEJAC CORPORATION Placentia, CA Sacramento, CA Anderson (Redding), CA San Diego, CA Phoenix, AZ www.bejac.com

800/77-BEJAC 888/655-3077 530/378-0881 800/54-BEJAC 800/77-BEJAC

APCO EQUIPMENT North Las Vegas, NV www.apcoequipment.com

800/574-4089

TRI-WEST TRACTOR, INC. Livermore, CA www.tri-westtractor.com

877/TRACTOR

CEG

RASMUSSEN EQUIPMENT CO. West Valley City, UT 800/453-8032 www.rasmussenequipment.com

Doug Mihelick, commercial manager of Caterpillar, uses a cutaway to show how Tier IV technology works, and how easy the next step is for the company, since all the technology that is used in Tier IV was introduced in Tier IV interim products.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 35

ASCO SUPPLY CO., INC. Austin, TX San Angelo, TX San Antonio, TX Wichita Falls, TX www.ascoeq.com

512/272-8922 325/655-5666 210/333-8000 940/687-2726

HI-WAY EQUIPMENT Alvin, TX 281/331-1521 Beaumont, TX 409/212-8100 Brenham, TX 979/836-6641 Bryan, TX 979/779-8942 Houston, TX 713/649-0940 Houston North 281/987-1990 www.hiwayequip.com

ABILENE NEW HOLLAND, LTD. Abilene, TX www.anhltd.com

800/382-9271

AMARILLO MACHINERY CO. Amarillo, TX 888/309-7800 www.amarillomachinery.com

NUECES POWER EQUIPMENT Corpus Christi, TX

361/289-0066 800/848-0790 Edinburg, TX 877/880-9120 Laredo, TX 877/580-9140 San Benito, TX 800/580-7140 Victoria, TX 877/580-9130 Vinton (El Paso), TX 877/580-9160 www.npetx.com

BANE MACHINERY INC. Dallas, TX 800/594-2263 Ft. Worth, TX 800/601-2263 Tyler, TX 800/594-2200 www.banemachinery.com

Page 36 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WAUKESHA-PEARCE INDUSTRIES, INC.

CLASSIFIEDS

12320 S. Main Houston, TX 77035 713-723-1050 Fax: 713-551-0798

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 AERIAL LIFTS

CRANES

Mini Excavators

Manlifts

Crane Inspections

NH Construction Equipment

GRADALL / LULL Sales - Service - Training

Specializing in Truck Mounted Cranes

New & Used Parts & Service

Modern Equipment Sales & Rental 800-445-4381

Modern Equipment Sales & Rental 800/445-4381

Modern Equipment Sales & Rental 800-445-4381

ASPHALT EQUIPMENT

ALL TYPES OF CRANES INSPECTED AND CERTIFIED

FORKLIFTS

Asphalt Pavers 2012 Leeboy 5000 Pathmaster, will pave 5-9', electric steering box ans 18 in conveyors, excellent, 311 hours ..........................$76,500. 2011 Leeboy 8515, heavy duty 8'-15' paver with low hours, high/low deck operator's choice controls, excellent, 639 hours .................................$119,900. Casey Equipment Co. 847-437-8686

Milling Machines 2006 Dynapac PL2000, 80'' planer, front loading conveyor, good condition, 3423 hours .................................$183,750. 2006 Dynapac FL500-16, Dynapac 20'' ride on, drum with full set of bits, good condition, 2786 hours .................$43,900. Casey Equipment Co. 847-437-8686

Accredited by the US Dept. of Labor Under 29CFR Part 1919 and Accredited by CALOSHA Call 215-639-2579 Atlantic Crane Inspection Services Visit us at www.atlanticcrane.com

SCRAPERS Pull Behind Scrapers 2005 Miskin D-18, 18 Yard Pull Pan Scraper, good condition,

Industrial Forklifts GRADALL / LULL Sales - Service - Training

800 hours...................$34,000.

TRAINING Operator Training Are your operators compliant with Federal Standards,

Port Arthur, TX 409-721-5305 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 San Antonio, TX 210-648-4444 Pflugerville, TX 512-251-0013 Buffalo, TX 903-322-7150 www.wpi.com

Komatsu Equipment Company 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557

Modern Equipment Sales & Rental 800-445-4381

OSHA, ANSI, ISO?

3825 Losee Road North Las Vegas, NV 89030 702-399-1004

MODERN GROUP

GENERATORS & GEN SETS

offers training for:

900 Marietta Way Sparks, NV 89431 775-356-1334 6253 West Gilbert Industrial Court Hurricane, UT 84737 435-986-1000

Generators & Gen Sets

Front-end Loaders & Backhoes

Hydraulic Excavators

For Sale or Rent

Aerial work platforms (AWP)

2007 JCB J5260, 60,000 lb, quick coupler, very good condition, 2535 hours........$103,425.

All Makes and Models Modern Equipment Sales & Rental 800/445-4381

(Boom & Scissor Lifts) Rough Terrain Forklifts (Gradall, Lull, JCB) Skid Steer Loaders

LOADERS

New & Used Parts & Service

Wheel Loaders

For information, pricing or

NH Construction Equipment

Call 1-800-223-3827

New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

reservations: www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

TRUCKS

PARTS Crane Parts TEREX PARTS Modern Equipment Sales & Rental 800/445-4381

10790 South Highway 59 Gillette, WY 82718 307-682-1445 Rock Springs, WY 307-686-1300

NH Construction Equipment

Modern Equipment Sales & Rental 800-445-4381

Kilgore, TX 903-984-2011

219-616-6067

EXCAVATORS

Casey Equipment Co. 847-437-8686

Tomball, TX 281-351-9016

Bucket Trucks ELLIOTT BUCKET TRUCKS Modern Equipment Sales & Rental 800/445-4381

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ December 15, 2012 â&#x20AC;¢ Page 37

KIRBY-SMITH MACHINERY INC. 6715 W Reno Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065 Abilene, TX 877-577-5729 325-692-6334

DOZERS From Komatsu â&#x20AC;&#x201C; The Dozer Experts

Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000 www.kirby-smith.com

POWER MOTIVE CORPORATION 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Fax: 303-388-9328 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550 Milliken, CO 970-339-4098 www.powermotivecorp.com

ROAD MACHINERY LLC 4710A E. Elwood â&#x20AC;¢ Suite 6-7 Phoenix, AZ 85040 602-252-7121 Fax: 602-253-9690 Gilbert, AZ 480-545-2400 Tucson, AZ 520-623-8681 Prescott, AZ 928-778-5621 Albuquerque, NM 505-345-8383 Farmington, NM 505-324-8601 El Paso, TX 915-872-1001 Bakersfield, CA 661-695-4830

0VS % % % BOE % %P[FST HJWF ZPV UIF SFMJBCJMJUZ BOE WFSTBUJMJUZ ZPV FYQFDU GSPN UIF EP[FS FYQFSUT BU ,PNBUTV 5IFTF UP IPSTFQPXFS NBDIJOFT IBWF UIF GFBUVSFT ZPV OFFE UP DPNQMFUF ZPVS KPCT PO UJNF BOE PO CVEHFU t )ZESPTUBUJD 5SBOTNJTTJPO )45 GPS TVQFSC BDDVSBDZ BOE TNPPUI DPOUSPM t &YDFMMFOU CMBEF WJTJCJMJUZ UIBU NJOJNJ[FT PQFSBUPS HVFTTXPSL BOE SFEVDFT DZDMF UJNFT t "MM EBJMZ NBJOUFOBODF QPJOUT DFOUSBMJ[FE JO POF MPDBUJPO GPS DPOWFOJFOU BDDFTT

Freemont, CA 510-659-1903 Perris, CA 909-355-3600 Redding, CA 530-229-3822 Sacramento, CA 916-375-3540 Cananea, Sonora, Mexico 011-52-6453328300 www.roadmachinery.com

XXX LPNBUTVBNFSJDB DPN X XX LPNBUTVBNFSJDB DPN

Page 38 â&#x20AC;˘ December 15, 2012 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

B C usiness

Top models for great performance Great performance from Dynapacâ&#x20AC;&#x2122;s rollers and pavers Dynapac is proud to present several new pneumatic tired rollers: the CP224, CP224W and CP274. Dynapacâ&#x20AC;&#x2122;s pneumatic tired rollers DUH GHVLJQHG WR HQKDQFH HIÂżFLHQF\ VHUYLFHDELOLW\ RSHUDWRU VDIHW\ and comfort. Exceptional features include a smooth start-stop system ZKHQ FKDQJLQJ GULYLQJ GLUHFWLRQ ZLGH EDVH WLUHV DLU RQ WKH UXQ DQG D EDFN XS VSULQNOHU V\VWHP Dynapacâ&#x20AC;&#x2122;s new F1000 series wheeled or tracked asphalt pavers KDYH EHHQ GHVLJQHG HVSHFLDOO\ IRU WKH 1RUWK $PHULFDQ PDUNHW (OLPLQDWH FHQWHU OLQH VHJUHJDWLRQ ZLWK WKH SDWHQWHG RXWERDUG DXJHU GULYH DQG FRQYH\RU V\VWHP '\QDSDF RIIHUV WKH ORZHVW GHFN KHLJKW LQ WKH LQGXVWU\ IRU FOHDU YLVLELOLW\ DURXQG WKH SDYHU DQG LQWR WKH KRSSHU Dynapacâ&#x20AC;&#x2122;s drum rollers KDYH DQ LQGXVWU\ OHDGLQJ YLHZ RI GUXP HGJHV VXUIDFHV DQG VSULQNOHU QR]]OHV ZKLOH PDLQWDLQLQJ D ORZ FHQWHU RI JUDYLW\ (YHQ WKH ODUJHVW PRGHO OHWV WKH RSHUDWRU VHH DQ REMHFW IHHW KLJK DW RQO\ IHHW DZD\ :DQW WR NQRZ PRUH" +DYH D FORVHU ORRN DW dynapac.us.

BEE EQUIPMENT SALES LTD. 2506 Slaton Highway Lubbock, TX 79404 806/745-1511 Fax: 806/745-1542

www.dynapac.us

alendar

AGC of America Annual Convention: Registration is now open for the 2013 AGC Annual Convention and Constructor Expo, being held March 6 â&#x20AC;&#x201C; 9 in Palm Springs. The early bird discount, a $200 savings, is available until January 16. Room availability at the convention headquarter hotel (JW Marriott Desert Springs) is limited, so reservations should be made as early as possible. Complete conference details are available at http://convention.agc.org or you may contact Denise Woods, CMP, Director, Communications & Events, AGC of Minnesota, directly at 651/796-2186; toll free at 800/552-7670 or website: www.agcmn.org.

The Ohio Nursery & Landscape Association (ONLA) CENTS Show 2013 is January 14 thru 16, 2013 at the Columbus Greater Convention Center. The Ohio Nursery & Landscape Association is a non-profit trade association, incorporated in the state of Ohio, representing the interests of the stateâ&#x20AC;&#x2122;s nursery, garden center, and landscape industry. Membership is comprised of nursery stock growers, landscape contractors, & maintenance firms, garden centers, arborists and allied suppliers. 2013 MAASTO CONFERENCE: The Wisconsin Department of ONLA Headquarters: 72 Dorchester Square, Westerville, OH Main Phone: 614/899-1195. Main Fax: 614/899-9489 Transportation will host the Mid-America Association of State Transportation Officials (MAASTO) 2013 Conference â&#x20AC;&#x201C; â&#x20AC;&#x153;Sharing Strategies for Success.â&#x20AC;? AED Condex 2013: January 16 â&#x20AC;&#x201C; 17, 2013, The LVH (Las Vegas Hotel & The conference will be held JULY 16-19 at the HILTON HOTEL in downtown Casino), Las Vegas, Nevada. Show Location: Paradise Event Center Reach the decision-makers of North Americaâ&#x20AC;&#x2122;s leading construction equip- Milwaukee. One of the major events at MAASTO 2013 will be a trade show, ment, dealerships at CONDEX 2013 in Las Vegas, Nevada. And, now the where industry representatives will have the opportunity to showcase matedealerâ&#x20AC;&#x2122;s show is a limited space event, so donâ&#x20AC;&#x2122;t delay! CONDEX 2013 is a rials, technology, and professional services. The trade show will be held powerful venue for building and strengthening your business relationships July 17 and 18 at the conference hotel. More information on the trade show with both current and prospective dealer clients. Each year the industryâ&#x20AC;&#x2122;s registration, layout, schedule, and fees will be available in early 2013 at the top executives gather at AED Summit & CONDEX Trade Show. The only conference website, which will be linked via the MAASTO meetings webpage show in the industry dedicated strictly to equipment distribution. Questions? â&#x20AC;&#x201C; http://www.maasto.net/meetings.html. If you are looking to speak to Contact Sandy Brassel at 630/468-5126. someone with regard to the above conference you may contact Denise 5th Annual Michigan Utility Coordination Conference (MUCC) is January 16, Woods, CMP, Director, Communications & Events, AGC of Minnesota, 2013 from 9:00 AM to 3:00 PM at the Soaring Eagle Casino & Resort, directly at 651/796-2186; toll free at 800/552-7670 or website: Mount Pleasant, Michigan. Attend the 5th Annual Michigan Utility www.agcmn.org. Coordination Conference (MUCC) and learn how you can impact the overall utility coordination process. Questions? Feel free to contact Doug AGC of Minnesota â&#x20AC;&#x201C; SAVE THE DATE! Uâ&#x20AC;&#x2122;s FALL 2012 Construction Needham at 517/347-8336. Management Internship Presentations â&#x20AC;&#x201C; Tuesday, December 18, 2012 at National Pavement Expo 2013 â&#x20AC;&#x201C; January 23 to 26, 2013 at the Nashville 5:30 PM, API Group Headquarters, 1100 Old Highway 8 NW, New Convention Center, Nashville, Tennessee featuring â&#x20AC;&#x153;How to Building Profit Brighton. For information or to RSVP, contact Geoff Couling into Pavement.â&#x20AC;? Conference Schedule is Wednesday, January 23rd from 9 (couli005@umn.edu) or Peter Hilger (aphilger@umn.edu). If you have not AM to 4:30 PM; Thursday, January 24th from 8 AM to 4 PM; Friday, attended these presentations in the past, you are missing something! The January 25th from 8 AM to 4 PM; and Saturday January 26th from 8 AM to students work very hard and the presentations are always enlightening. 11:30 AM. Exhibit Hours are Wednesday, January 23rd thru Friday, January 25th. Special Events include Preview Night on Wednesday, January 23rd; Industry Roundtables on Thursday and Friday, January 24th *** For more information on the above AGC of Minnesota events, you may and January 25th; Discovery Showcase on Friday, January 25th. Ask the contact Denise Woods,CMP; Director, Communications & Events, Pros! On the Show Floor on Friday, January 25th from 2:30 PM to 4:30 PM. Associates General Contractors of Minnesota, 525 Park Street, #110, St. CONTACT information: TELEPHONE: 800/827-8009. Paul, MN 55103 DIRECT: 651/796-2186; CELL: 612/201-5501; FAX: 651/632-8928; TOLL FREE: 800/552-7670 and/or www.agcmn.org. POWER SHOW OHIO (OMEDA), featuring Construction Equipment, Agricultural Equipment and Outdoor Power Equipment will be held at the Ohio Expo Center, Columbus, OHIOâ&#x20AC;ŚJANUARY 25, 26 & 27, *No Checks accepted less than 5 days prior to class date payment reserves 2013â&#x20AC;ŚFriday, Saturday, Sunday from 9 AM to 4 PM. Power Show Ohio the seat for class â&#x20AC;&#x201C; we do not save seats. For more information on the above is sponsored by the Ohio-Michigan Equipment Dealers Association classes which include dates/locations/costs, please contact Scott (OMEDA); PO Box 68, Dublin, OH 43017-0068; Telephone: 614/889- Brumbelow, Assistant Executive Director, GUCA, 404/362-9995. 1309 or Email: dalford@amglicusa.com. ROAD INSTITUTE 2012 â&#x20AC;&#x201C; 2013 Schedule Announced!!! Road Institute R will soon begin its 48th year as the asphalt paving industryâ&#x20AC;&#x2122;s premier training school, providing practical instruction for industry professionals. Volvo Construction Equipment has announced the 2012 â&#x20AC;&#x201C; 2013 schedule for the Road Institute. The course curriculum offers two- to five-day sessions that begin in October and continue through May 2013, with classes held at two training facilities in North America â&#x20AC;&#x201C; one in Chambersburg, PA and the other in Phoenix, AZ. â&#x20AC;&#x153;The Volvo commitment to training includes offering this program as a service to the industry and providing others the opportunity to learn best practices in a controlled environment with a focus of instruction and training dedicated to asphalt paving,â&#x20AC;? said Wade Turlington, Michigan Construction & Design Tradeshow â&#x20AC;&#x201C; February 6, 2013. Director of Product and Sales Education. â&#x20AC;&#x153;The Road Institute is dedicated to The Construction Association of Michigan (CAM), Bloomfield Hills, is pleased to announce that the Michigan Construction & Design Tradeshow providing quality instruction to industry professionals, even if they donâ&#x20AC;&#x2122;t own or operate Volvo equipment.â&#x20AC;? will be returning to MotorCity Casino Hotel in Detroit. This one-day tradeshow will be held on February 6, 2013, and will be attended by 2012 â&#x20AC;&#x201C; 2013 Road Institute Course SCHEDULE includes topics such as: construction owners, contractors, suppliers, architects and engineers. . Automatic Grade and Slope Systems Show hours are 10:00 AM to 5:00 PM. . Large Asphalt Compactor Mechanics (Step 1) The Michigan Construction & Design Tradeshow will also play host to the CAM 127th Annual Meeting, CAM Magazine Special Issue Awards, Green . Large Asphalt Compactor Mechanics (Step 2) . MT2000 Hydraulic and Electrical Systems (Step 1) Building Awards, and Construction Project of the Year Award, which will . MT2000 Hydraulic and Electrical Systems (Step 2) be held inside the Sound Board. CAMTEC, the training and education . MW500 Hydraulic and Electrical Systems (Step 1) division of CAM, will offer classes during the tradeshow, as well. Booth space is available for purchase. Contact Ron Riegel or Cathy Jones at . Paver and Compactor Operation and Maintenance CAM for tradeshow rates and information. Telephone: 248/972-1000 . Paver and Compactor Operation and Maintenance, warm-mix asphalt and Fax: 248/972-1001, 43636 Woodward, Bloomfield Hills, MI (WMA) 48302. . Paver Hydraulic and Electrical Systems â&#x20AC;&#x201C; PF6000 â&#x20AC;&#x201C; Series Pavers (Step 1) World of Concrete / Concrete and Masonry Construction Event â&#x20AC;&#x201C; World of Concrete - Exhibits: February 5 â&#x20AC;&#x201C; 8, 2013 Seminars: . Paver Hydraulic and Electrical Systems â&#x20AC;&#x201C; PF6000 â&#x20AC;&#x201C; Series Pavers (Step February 4 â&#x20AC;&#x201C; 8, 2013 Las Vegas Convention Center, Las Vegas, 2) Nevada USA . Paver Hydraulic and Electrical Systems â&#x20AC;&#x201C; Blaw-Knox R Pavers (Step 1) Since 1975, World of Concrete has been the industryâ&#x20AC;&#x2122;s only annual inter- . Paver Screed Operation and Adjustment national event dedicated to the commercial concrete and masonry construction industries. Featuring indoor and outdoor exhibits, leading suppli- . Paving and Compaction Application Seminar . Small Asphalt Compactor Mechanics (Steps 1 and 2) ers showcasing innovative products and technologies, exciting demon. Soil Compaction Application Seminar strations and competitions, a world-class education program, and the information you need to help sustain and grow your business. Start the . Soil Compactor Mechanics (Step 1) year off strong at World of Concrete! EMAIL: contactus@worldofcon. Soil Compactor Mechanics (Step 2) crete.com Class size is limited for ideal instructor-to-student ratios and team learning. Tuition is $750 (USD) per student per three to five day course or $500 ARA The Rental Show is February 10-13 at a new Las Vegas location: (USD) per student per two day seminar. For more information on the Road The Sands Expo and Convention Center, right in the middle of the Las Institute or to register for classes, visit roadinstitute.com or call 866/497Vegas Strip. Click on www.therentalshow.com for a detailed schedule and more information. 4501 or email: roadinstitute@volvo.com.

Minnesota Nursery & Landscape Association (MNLA) â&#x20AC;&#x201C; Successful Business Grow Here! 2012 EVENTS CALENDAR: January 8, 2013 â&#x20AC;&#x201C; 8:00 AM CST â&#x20AC;&#x201C; 5:00 PM CST â&#x20AC;&#x201C; SUPER TUESDAY: PERMEABLE PAVER SYSTEMS CERTIFICATE COURSE January 8, 2013 â&#x20AC;&#x201C; 8:00 AM CST â&#x20AC;&#x201C; 5:00 PM CST â&#x20AC;&#x201C; SUPER TUESDAY: LANDSCAPE IRRIGATION TROUBLESHOOTING (PLT RELICENSURE) January 9th thru 11th, 2013 â&#x20AC;&#x201C; NORTHERN GREEN EXPO. This event features a trade show, educational sessions, and networking events. ***Please contact MNLA at mnla@mnla.biz or call toll free: 888-8866652 for more information.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 39

Page 40 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Air Compressor Solutions, Inc. Odessa, TX (432) 335-5900

Ditch Witch of Arizona Phoenix, AZ (602) 437-0351 (602) 437-1544 (Fax)

Ditch Witch of Southern Arizona Tucson, AZ (520) 579-0261 (520) 579-0268 (Fax)

Pape Material Handling Inc. /

Volvo Construction Equipment & Services Bakersfield, CA (661) 387-6090 Fresno, CA (559) 834-4420

San Diego/ Lakeside, CA (619) 441-3690

San Leandro, CA (510) 357-9131

Corona, CA (951) 277-7620

Sacramento, CA (916) 388-2244

Arlington, TX (817) 633-1010 Houston, TX (713) 681-9221

7000 SW Sandburg Rd. Portland, OR (503) 639-8910

Bobcat West

www.papemh.com www.bobcatwest.com 9892 40th Avenue South 1224 North California Avenue Seattle, WA Pasco, WA (206) 722-5800 (509) 545-1959

7909 N. Upland Dr. Portland, OR (503) 286-6400

19705 60th Avenue NE, Suite B1 Arlington, WA (360) 474-8461

4890 Contractors Drive Wenatchee, WA (509) 884-2934

29550 Airport Road Eugene, OR (541) 689-7407

1307 54th Avenue East Fife, WA (253) 926-4386

5518 East Broadway Spokane, WA (509) 536-7300

500 Pech Road Medford, OR (541) 779-3444

3896 Irongate Road Bellingham, WA (360) 756-6572

25 Vista Boulevard Sparks, NV (775) 356-9333

909 South 18th Street Yakima, WA (509) 248-5636

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 41

Built like the BIG Boys

NORAM 65E

53" gear driven circle with “A” frame

Compact Grader

Full power shift transmission

With BIG Grader Features

90° bank slope saddle

NorAm 65E | 110 HP | 16,800 LBS | 10' or 12' BLADE The NorAm 65E is engineered with the same standard features as other BIG grader manufacturers such as a 53" Circle with “A” Frame Drawbar, Full Power Shift Transmission with Torque Converter, and Torque Proportioning Rear Differential, making it the highest resale value in its class. The NorAm 65E…Compact Grader with BIG grader features.

We put the “Know” in Knowledge when it comes to Compact Motor Graders ARIZONA

NEW MEXICO

NEVADA

COLORADO

EARHART EQUIPMENT www.earhartequipment.com Tucson 520-889-6396

WAGNER EQUIPMENT CO. www.wagnerequipment.com Flora Vista 505-334-5522 (Rental) La Cruces 575-647-9700 Albuquerque 505-938-2000 (Rental) 505-345-8411 Hobbs 575-393-2148 (Rental) 575-393-3665 Clovis 505-235-3294 (Rental) Farmington 505-327-5331

APCO EQUIPMENT www.apcoequipment.com North Las Vegas 702-871-7474

WAGNER EQUIPMENT CO. www.wagnerequipment.com Aurora 303-739-3000 Denver 303-433-2727 (Rental) Carbondale 970-963-7368 (Rental) Commerce City 303-286-2300 (Rental) Colorado Springs 719-390-7316 (Rental) 719-635-1669 Granby 970-328-2080 (Rental) Gypsum 970-328-2080 (Rental) Hayden 970-276-3781

OKLAHOMA OCT EQUIPMENT www.octequipment.com Clinton 580-323-3422 Oklahoma City 405-789-6812 Tulsa 918-437-5085

www.noram65.com

HAWAII HAWTHORNE CAT www.pacific.hawthornecat.com Hilo 808-961-3437 Kauai 808-245-4058 Kona 808-329-4521 Oahu 808-677-9111 Oahu/Mapunapuna 808-834-8797 (Rental) Maui 808-877-6538

Silverthorne 970-262-3788 (Rental) Fort Collins 970-493-5005 (Rental) Grand Junction 970-245-6546 (Rental) 970-242-2834 Pueblo 719-544-0088 (Rental) 719-544-4433 Steamboat Springs 970-871-1990 (Rental) Windsor 970-278-1750 (Rental) Burlington 719-346-7880 (Rental) (719) 346-5132 Durango 970-259-2001 (Rental) 970-259-2001 Windsor 970-278-1750

TEXAS ANDERSON MACHINERY CO. www.andersonmachinery texas.com Corpus Christi 361-289-6043 Manor 512-272-8133 Pharr 956-781-5995 San Antonio 210-661-2366 Victoria 361-575-8111 HOLT CAT www.holtcat.com Dallas 214-342-6700 Ft. Worth 817-847-8880 Irving 214-342-6700 Waco 254-662-7377

GEORGE P. BANE, INC. www.banemachinery.com Tyler 903-597-6641 YELLOWHOUSE MACHINERY CO. www.yellowhouse.us Abilene 800-592-4468 Amarillo 800-658-9868 Lubbock 800-658-9878 Odessa 800-658-9888 San Angelo 800-658-9130 Wichita Falls 877-658-9877 MUSTANG CAT www.mustangcat.com Houston 713-460-2000 Beaumont 409-892-8412

Bryan 979-775-7368 Bryan 979-775-0639 Channelview 281-452-7368 Conroe 936-756-1110 El Campo 979-543-3389 Freeport 979-233-7368 Houston 713-462-9993 Houston 713-228-7368 LaMarque 409-935-7000 Lufkin 936-639-5551 Lufkin 936-632-6775 Nederland 409-722-7368

WAGNER EQUIPMENT CO. www.wagnerequipment.com El Paso 915-493-5005 (Rental) 915-821-7651

CALIFORNIA HAWTHORNE CAT www.hawthornecat.com San Diego 858-674-7000 Lakeside 619-561-8700 (Rental) San Marcos 760-740-2900 (Rentals)

Built from a lineage of market leaders for over 60+ years

QUINN CAT www.quinncompany.com 10006 Rose Hills Road City of Industry, CA 90601 888-842-2155 Fax: 562-692-1843 Bakersfield Corcoran Firebaugh Foothill Ranch Fresno Lancaster Los Angeles Oxnard Salinas Santa Maria Sylmar

Made in the USA

Page 42 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. CONSTRUCTION EQUIPMENT | PRIORITY EQUIPMENT: -CATERPILLAR WHEEL LOADER 966H (YEAR 1995-2005) -LINK BELT EXCAVATOR 265F2 ALSO KNOWN AS SUMITOMO LS2650FJ2 OR A SIMILAR MODEL FROM CATERPILLAR/ KOMATSU/HITACHI (YEAR 1995-2005) KOMATSU MOBILE CRUSHER BR350JG (YEAR 1995-2005) CONTACT: ARTUR BERKALIYEV PHONE: 832-571-3909 EMAIL:ARTUR.BERKALIYEV@GMAIL.COM –––––––––––––––––––––––––––––––– 3 YARD BALDERSON HOOK LOADER BUCKET CONTACT: FREDRICK NOLL PHONE: 701-872-6336 EMAIL: FREDNOLL@HOTMAIL.COM –––––––––––––––––––––––––––––––– LOOKING FOR STEEL SHEET PILE AND STEEL H PILE CONTACT: WILLIE PHONE: 201-786-3354 FAX: 201-444-6377 EMAIL:WILLIEKIRCH@GMAIL.COM –––––––––––––––––––––––––––––––– WANT TO BUY 9 USED GEINE GS1930 MACHINES. CONTACT: ALLEN LIU PHONE: 610-340-2765 EMAIL: CLIU0000@HOTMAIL.COM –––––––––––––––––––––––––––––––– NEED BULLDOZER D7G D7H D8K D8N D9 D10 1975 AND UP FROM USA ONLY CONTRACTORS NO SALEMAN PLEASE CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 OR CELL 1 514 386 8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– JOHN DEERE 444H | TRANS. FOR THIS LOADER 444H CONTACT: BOB WILLIAMS PHONE: 863 494 1616 EMAIL: BOBWILL47@YAHOO.COM –––––––––––––––––––––––––––––––– CATERPILLAR MOTOR GRADERS | LOOKING TO PURCHASE SEVERAL UNITS OF 12G (78 - UP), 140G (87 - UP), 140 H (99 - 02), AND 14G/H (72 - 00) CATERPILLAR MOTOR GRADERS, PREFERABLY WITH RIPPER. GRADERS MUST BE GOOD LOOKING AND IN WORKING CONDITION WITH OLD PAINT. PLEASE SEND PICTURES, CONDITION, SERIAL NUMBER AND FINAL PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 | EMAIL:SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED FRONT LOADER BACKHOE AND CHEVY TRUCK 2500 4X4. FOR 1985 HISTORICAL/CLASSIC BIARRITZ CONTACT: JOHN PHONE: 440-567-5108 FAX: 440-269-8161 EMAIL: SOSVP@OH.RR.COM ––––––––––––––––––––––––––––––––

LOOKING TO PURCHASE USED VIBRATORY PILE HAMMERS/DRIVERS IMMEDIATELY. BRANDS I AM SEEKING ARE MKT, PVE, ICE & APE. SEEKING VIBRATORY WITH POWER PACK OR EXCAVATOR MOUNTED PILE HAMMER AS WELL. CONTACT: JEFF LAWSON PHONE: 864-542-4369 EMAIL: JLAWSON29321@CHARTER.NET –––––––––––––––––––––––––––––––– JCB 212 CONTACT: KEN PHONE: 627-1265 FAX: 623-5009 EMAIL: MASTERLINK@COMCAST.NET –––––––––––––––––––––––––––––––– ARIEL LIFT | CONSTRUCTION A200 FEET HEIGHT TEMPLE SWO TO CARRY GOODS EASILY CONTACT: RABINDRANATHTIADI PHONE: 09438485517 EMAIL: SHREEGURUREALEST@GMAIL.COM –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 TRACK JAW CRUSHER | LATE MODEL LOW HOUR USA LOCATION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– TRUCKS OR CARS CONTACT: RACHEL PHONE: 417-684-7830 EMAIL: RACHELMCCONNAUGHEY@YAHOO.COM –––––––––––––––––––––––––––––––– MOBILE CONCRETE BATCHING PLANT CONTACT: JOHN MICALLEF FAX: 0035621807931 EMAIL: JMICALLEFBUILDERS@GMAIL.COM –––––––––––––––––––––––––––––––– BOBCAT BRAND SKID STEER LOADERS | PREFER LARGE FRAME MACHINES EQUIPPED WITH THE "GOLD PACKAGE", HOWEVER ANY BOBCAT WILL BE CONSIDERED. PLEASE SEND A FEW PHOTOS AND ASKING PRICE. QUICK PAYMENT AND REMOVAL OF MACHINERY. ***DEALERS NEED NOT RESPOND*** CONTACT: WARREN EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– COMPACTION WHEEL LIKE DC12 SKH CONTACT: RALPH HAGEDORN PHONE: 707-349-4700 EMAIL: RHAGEDONE@GMAIL.COM –––––––––––––––––––––––––––––––– LOOKING FOR BULLDOZER D9N OR D9R AS SOON AS P/S FROM 1990 UP 1998 CONTACT: OUFI PHONE: 966530185141 FAX: 96627512024 EMAIL:ALOUFI01@HOTMAIL.COM ––––––––––––––––––––––––––––––––

UNDERCARRIAGE ROLLERS | 14 SINGLE FLANGE SYSTEM’S ONE UNDERCARRIAGE ROLLERS FOR D5G CAT – NEW OR NEAR NEW. CONTACT: TOM PHONE: 218-843-1023 EMAIL: CALLPHONENUMBER@COMCAST.NET –––––––––––––––––––––––––––––––– NEED BULLDOZER D7G WITH WINCH EAST COST USER «CONTRACTOR ONLY NO SALEMAN I NEED 2 | D7G D8K D9N D10N CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 OR CELL 1 514 386 8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– LULL 844C42 CONTACT: KEVIN PHONE: 856-297-4758 EMAIL: KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– KOMATSU WA 500 WHEEL LOADER | LATE MODEL, LOW HOUR, WORK READY, USA LOCATION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMIEQUIP@YAHOO.COM –––––––––––––––––––––––––––––––– UTILITY VEHICLE UNDER $200,000 CONTACT: JONATHAN EMAIL: JETDST@GMAIL.COM –––––––––––––––––––––––––––––––– FORKLIFT | CAT OR YALE FORKLIFT 12,000 B CAP SOLID RUBBER TIRES OR ?? . NEED A 3 STAGE MAST.I BROKER EQUIP TO SELL TO MY CUSTOMER , NEED A GOOD WHOLESALE PRICE. CONTACT: HANK BOTT PHONE: 440-235-1723 EMAIL: HBINDUSTRIAL@JUNO.COM –––––––––––––––––––––––––––––––– NEED ALL THE TIME 7 DAYS BULLDOZER D3AT D10 EXCAVATOR LOADER GRADER USA USER ONLY | «ONLY CONTRACTORS NO SALEMAN« CONTACT: JEAN MAURICE BOUTINJ PHONE: 1 450 346 8975 OR 514 386 8975 EMAIL:JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– WE BUY MANUALS | LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATORS OR OTHER MANUALS FOR EQUIPMENT, TRUCKS AND VEHICLES OF ALL SORTS. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. CONTACT: GRACE FRANCES PHONE: 270-849-2270 EMAIL: TRITOWN1@MSN.COM ––––––––––––––––––––––––––––––––

ASPHALT PAVERS | WE ARE LOOKING TO PURCHASE USED DYNAPAC F12, F14, F16 PAVERS AND ABG TITAN 423 PAVERS. MACHINES MUST BE GOOD LOOKING AND IN WORKING CONDITION WITH OLD PAINT. PLEASE SEND PICTURES, YEAR, MODEL, SERIAL NUMBER, MACHINE CONDITION AND FINAL OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 EMAIL: SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– GEHL V400 WITH HEAT/AC, QUICK ATTACHMENT FOR EQUIPMENT, A 4-1 BUCKET, TIRES AND REMOVEABLE TRACKS, SET UP FOR SNOW REMOVAL, INCLUDING THE BEST SNOWBLOWER ON THE MARKET AND CHAINS FOR THE TIRES. CONTACT: AL WRIGHT PHONE: 304-693-7218 EMAIL: MOONRIVER1967@YAHOO.COM –––––––––––––––––––––––––––––––– TRACKS & PADS | PLEASE QUOTE A PAIR OF TRACKS AND PADS FOR A CATERPILLAR D10N. THANK YOU. CONTACT: KELLY TUCKER PHONE: 8138686714 FAX: 8134892477 EMAIL:KELLY.T@FARESBROS.COM –––––––––––––––––––––––––––––––– MKT PILE DRIVERS | I AM SEEKING TO PURCHASE USED MKT PILE DRIVERS AT ALL TIMES. YOUR BEST OPTION TO CONVERT YOUR USED PILE HAMMER INTO CASH. SEND ME PICS AND SPECS ON YOUR USED MKT BRAND PILE HAMMER EQUIPMENT TODAY. CONTACT: JEFF LAWSON EMAIL: JLAWSON29321@CHARTER.NET –––––––––––––––––––––––––––––––– FRONT LOADER | WANTED: FRONT LOADER BACKHOE FROM PRIVATE OWNER IN FAIR CONDITION CONTACT: JOHN PHONE: 440-567-5108 FAX: 440-269-8161 EMAIL: SOSVP@OH.RR.COM –––––––––––––––––––––––––––––––– DOZER | D21-P CONTACT: RICHARD EMAIL: KR2001FRAN@AOL.COM –––––––––––––––––––––––––––––––– BOREHOLE WATER DRILLING TRUCK | I WANT A TRUCK ATTACH WITH AN EQUIPMENT TO DRILL WATER, AN INDUSTRIAL EQUIPMENT FOR DRILLING BOREHOLE WATER CONTACT: BEN PHONE: 713 516 8772 EMAIL: BENCAPILON@YAHOO.COM –––––––––––––––––––––––––––––––– ROTOTILT | LOOKING FOR A ROTOTILT TO ATTACH ON BOOM TO USE WITH BUCKET ON A TAKEUCHI TB125 EXCAV. CONTACT: KEN WEAVER PHONE: 724-938-2500 EMAIL: HTR9382500@YAHOO.COM ––––––––––––––––––––––––––––––––

WE BUY VOLVO CHAIN EXCAVATORS 2028HT | NEED TO BUY VOLVO USED CHAIN EXCAVATORS MODEL NO. 3035HT AND MODEL NO. 2028H. PLEASE SEND ME ALL DETAILS. IF YOU HAVE THESE EXCAVATORS IN YOUR STOCK. THANKS CONTACT: AGHA WAQAR ALI KHAN PHONE: 92-300-4642935 FAX: 92-42-35942188 EMAIL:BDIL6@YAHOO.COM –––––––––––––––––––––––––––––––– USED EXCAVATORS CONTACT: PETER THOMPSON PHONE: 01512360917 FAX: 01512360917 EMAIL: THOMPSONPLANT@BTCONNECT.COM –––––––––––––––––––––––––––––––– SCAFFOLDS CONTACT: CHIKA PHONE: 7274030866 EMAIL: NWANNACHIKA@YAHOO.COM –––––––––––––––––––––––––––––––– FIAT ALLIS D5 DOZER LEFT FINAL DRIVE CONTACT: JOHNNY OGLESBY PHONE: 7068718201 EMAIL: KYLEOGLESBY84@GMAIL.COM –––––––––––––––––––––––––––––––– KAWASAKI WHEEL LOADERS: 70Z THRU 95Z-II & IV SERIES ONLY, YEAR FROM 1985 TO NEWER. ANY CONDITION CONTACT: IVAN PHAM PHONE: 951-445-7565 FAX: 951-509-4618 EMAIL:PHAMIVAN@YAHOO.COM –––––––––––––––––––––––––––––––– EXCAVATORS | WANTED TO BUY USED KOMATSU, HITACHI, KOBELCO EXCAVATORS ANY CONDITION, COMPACTOR ROLLERS, WHEEL LOADERS. I WILL PICK UP AT YOUR LOCATIONS FAST CASH PAY TO YOU NO WAITING, JUST CALL ME WE BUY EVERY DAY, ALWAYS LOOKING FOR USED EQUIPMENT TO BUY. CONTACT: IVAN PHAM PHONE: 951-445-7565 FAX: 951-5094618 EMAIL:PHAMIVAN@YAHOO.COM –––––––––––––––––––––––––––––––– FRONT END LOADER | I NEED A LOADER FOR A KUBOTA BX1500. CONTACT: KRIS IVES PHONE: 540-868-2709 EMAIL: IVES.RIOUX@GMAIL.COM –––––––––––––––––––––––––––––––– 2007 2009 CAT D8R | LOOKING FOR 10 UNITS OF CAT D8R, SHOULD BE 2007 2009 & NOT MORE THAN 5000 HOURS. TRADE PRICING ONLY CONTACT: GM PHONE: +971552541439 EMAIL: INFO@MACHINERY-MANAGER.COM ––––––––––––––––––––––––––––––––

PARTS FOR CAT 613B PADDLE SCRAPER | I WANT BOTH PADDLE CHAIN IDLER ASSEMBLIES W/MOUNTING BRACKETS FOR A CATERPILLAR 613B PADDLE SCRAPER. CONTACT: SID PHONE: 281-389-7777 EMAIL: SID1786@LIVINGSTON.NET –––––––––––––––––––––––––––––––– BUCKET, FRONT LDR KOMATSU WA450L | FRONT BUCKET, (PREFER ROCK) FOR A WA 450L , OR SOMETHING CLOSE TO SAME THAT WE MIGHT RE - LUG AND FAB / FIT CONTACT: JACK CHERRY PHONE: 541-993-0228 FAX: 509-767-2282 EMAIL:OREGONHEAVY@YAHOO.COM –––––––––––––––––––––––––––––––– BRIDGE DECK PAVER • NEED TEREX/BIDWELL 4800 IN EARLY JANUARY IN FORT WORTH, TX. USA CONTACT: WHITNEY BROUSSARD PHONE: 214-507-2157 FAX: 817-232-8984 EMAIL: WB@BROUSSARDEQUIPMENT.COM –––––––––––––––––––––––––––––––– KOMATSU BR380 JG1 TRACK JAW CRUSHER • LATE MODEL LOW HOUR, USA LOCATION CONTACT: RICHARD PHONE: 603-828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– WE ARE LOOKING TO PURCHASE CATERPILLAR D8K DOZERS, YEAR MODEL 1980 AND UP WITH AFTERCOOLER AND SPACER PLATE AND RIPPER. MACHINES MUST BE GOOD LOOKING AND IN WORKING CONDITION WITH ORIGINAL PAINT. PLEASE OFFER ME WHAT YOU HAVE WITH BUNCH OF PICTURES, YEAR MODEL, SERIAL NUMBER, MACHINE CONDITION AND FINAL OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 EMAIL: SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– BRH1100 TRAMAC 80MM PIN MOUNT FOR SAMSUNG210 • NEED 80MM SAMSUNG SE210 PIN MOUNT FOR BRH110 TRAMAC HAMMER CONTACT: JOHN NILSEN PHONE: 914-261-0322 FAX: 845-225-0797 EMAIL:SPEC100@COMCAST.NET –––––––––––––––––––––––––––––––– LOADER TIRE W/RIM MODEL 55B SIZE 175X25 12 STUD USED | USED TIRE/W RIM SIZE 17.5X25 12 STUD LOADER 55B MICHIGAN LOCATION, MASSACHUSETTS CONTACT: TANYA PHONE: 508-587-0770 EMAIL: AUTO362@VERIZON.NET ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 43

BAR NONE www.barnoneauction.com

(866) (866) 372-1700

Heavy Equipment & Commercial Trucks

JAN

DEC

YOUR SOURCE FOR

M MONTHLY ONTHLY

PUBLIC PUBLI C

AUCTIONS AUCTIONS

Sacramento, CA 4715 Power Inn Road (916) 383-2000

San Bernardino, CA 175 West Central Ave. (909) 383-5500

2006 & 2005 John Deere 310G 4x4 Loader Backhoes

JAN

Portland, OR 1001 N. Schmeer Road. (360) 567-8154

featured inventory t 3 t tt 8 tt 7 tt 7 tt 5 tt 4 tt 20

2005 Caterpillar D6R DS XL Crawler Dozer

Motor Graders Motor Graders Crawler Crawler Dozers Dozers Skip Skip Loaders Loaders SScissor cissor Lifts Liffts ts Dump Dump Trucks Trucks Water Water Trucks Trucks Van Van Trailers Trailers

t t 3 Wheel Wheel Loaders Loaders tt 26 Ex Excavators cavators tt 3 R Rollers ollers tt 11 L Loader oader Backhoes Backhoes Loaders tt 7 Reach tt 14 Skid Skid Steer Steer Loaders Reach Lifts Liffts ts tt 4 Service Service Trucks Trucks tt 28 Truck Truck Tractors Tractors Attachments tt Support Support Equipment Equipment & Attachments tt G Government overnment Surplus Surplus Vehicles Vehicles SEE COMPLETE INVENTORY AT...

WWW.BARNONEAUCTION.COM

2006 Ford F650 S/A Dump Truck

2006 Caterpillar 430E 4x4 Loader Backhoe

Bid Live Onsite or Online! www.barnoneauction.com

Consign With Us! We are always accepting quality consignments. Call us to find out more!

2005 Kobelco SK210LC Hydraulic Excavators

1997 Caterpillar 160H Motor Grader

28 ft S/A Van Trailers

2009 Caterpillar 226B Skid Steer Loader

Page 44 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Coming Auctions ALEX LYON & SON Attachments, DEANCO Trucks and Trailers AUCTIONS AUCTIONEERS www.lyonauction.com 315-633-2944 • Harrisburg, PA Fri., December 21, 2012 For: Construction Equipment, Trucks & Trailers • Greenwich, NY Fri., December 28, 2012 For: Construction Equipment, Trucks and Trailers • Manassas, VA Sat., January 12, 2012 For: Construction Equipment, Trucks & Trailer, Aerials and Forklifts • Portland, OR Thurs., January 17, 2013 For: Construction Equipment, Forklifts, Trucks & Trailers • Cleveland, OH Sat., January 19, 2013 For: Construction Equipment, Attachments, Trucks & Trailers • Queretaro, Mexico Fri., January 25, 2013 For: Construction Equipment,

www.deancoauction.com 601-656-9768

18, 2012 For: Construction Equipment, Trucks & Trailers

December 19, 2012 For: Construction Equipment

• Dothan, Al Jan 31 thru Feb 2, 2013 For: 16th Annual Farm & Construction Equipment Auction

• Hutchinson, KS Thurs., January 10, 2013 For: Construction and Farm Equipment, Trucks & Trailers

• Pendleton, IN March 29, 2013 For: Construction Equipment

• Philadelphia, MS March 20-22, 2013 RITCHIE BROS. For: 12th Annual Springtime AUCTIONEERS www.rbauction.com Contractors Equipment Auction 402-421-2631 • Philadelphia, MS • Salt Lake City, May 29-30, 2013 UT For: Construction December 18, Equipment 2012 • Philadelphia, MS • Northeast, MD July 17-18 2013 December 18, For: Construction 2012 Equipment

• Online Only Tues., January 22, 2013 For: Construction and Farm Equipment

• Kissimmee, FL Sat.-Sun., February 2-10, 2013 For: Annual 9 Day Auction! Construction Equipment, Trucks, Trailers, Support

• Springfield, IL Thurs., January 31 2013 For: Construction and Farm Equipment

• Online Only Closing February 5, 2013 • Philadelphia, MS For: Late Model • Nashville, TN September 18-19, John Deere Farm December 19, 2013 Equipment 2012 For: Construction • Online Only • Los Angeles, CA Equipment Thurs., February December 19-20, • Philadelphia, MS 19, 2013 2012 November 20-21, For: Construction • St. Louis, MO 2013 and Farm December 20, For: Construction Equipment, Trucks 2012 Equipment and Trailers • Las Vegas, NV February 8, 2013 • Tipton, CA February 15, 2013 • Orlando, FL February 18-23, 2013

DON SMOCK AUCTION CO., www.delpeterson.com INC.

DEL PETERSON & ASSOCIATES 800-492-9090 • Online Only Closing December

• Pendleton, IN June 21, 2013 For: Construction Equipment • Pendleton, IN September 20, 2013 For: Construction Equipment • Pendleton, IN December 13, 2013 For: Construction Equipment

IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid!

• ONLINE ONLY December 20, www.dsa-auctions.com 2012 765-778-9277 For: Construction • Enon, OH Equipment

MEEKINS AUCTION COMPANY

Equipment

• ONLINE ONLY Fri., December 28, www.meekinsauction.com 2012 800-499-6560 For: Construction Equipment • Lumberton, NC Thurs., December 27, 2012 STEFFES For: Construction AUCTIONEERS Equipment • Wilson, NC Thurs., January 31, 2013 For: Construction Equipment

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • Providence, RI Thur., December 20, 2012 For: Construction Equipment • Elmwood Park, NJ Wed., January 30, 2013 For: Construction Equipment

INC.

www.steffesauctioneers.com 701-237-9173 • Litchfield, MN Thurs., Dec. 20, 2012 For: Construction, Ag, Trucks and Vehicles

UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., February 22, 2013 For: Construction and Utility Equipment

YODER & FREY AUCTIONEERS, INC.

PURPLE WAVE AUCTION

www.yoderandfrey.com 419-865-3990

www.purplewave.com 866-608-9283

• Kissimmee, FL February 11-18, 2013 For: Construction Equipment, Trucks and Trailers

• ONLINE ONLY Thurs., December 20, 2012 For: Construction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 45

18TH ANNUAL DECEMBER CONTRACTORS AUCTION Sale Site Address: 4070 NC Hwy 211 East Lumberton, NC 28358

THURSDAY, DECEMBER 27th, 2012 - 8:00 AM 2012 PETERBILT 389 2007 TRAIL KING TK110HDG-553 (55 TON)

(3 OF 11) 2004-2003 MACK CV713 GRANITES

Over 800 Absolute Items already consigned! For up-to-date auction inventory, with pictures and descriptions, view auction information, visit our company website www.meekinsauction.com

(2 OF 3) 1999 MOXY MT36 ARTIC DUMPS

2007 DEERE 350D LC

2007 KOMATSU WA450 GALEO

AG CHEM TERRA-GATOR 1603T 2005 JLG G9-43A

1957 CHEVROLET BEL AIR

2007 CAT 416E 4X4

1959 CADILLAC COUPE DE VILLE

Auction conducted by:

2006 CHEVROLET C8500 DRILL TRUCK

2008 CAT 312D L

2008 KOMATSU D51PX-22

2007 MAGNUM MMG125 (90 KW) GEN SET

2008 ROADTEC RP-170

2001 CHAMPION 720A VHP SERIES V

1999 CAT 345BL

2005 CAT D5N XL 2005 CAT D5N LGP

2008 NEW HOLLAND TN75SA (4X4)

Lloyd Meekins & Sons Auction Company 4070 NC Hwy 211 East, Lumberton, NC 28358 NC Firm License #858 Office Phone: (800) 499-6560 (910) 739-0547 Email: info@meekinsauction.com

Page 46 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 47

REACH OVER 20,000 GLOBAL BUYERS ONLINE NO SHIPPING | SELL RIGHT FROM YOUR YARD ADD YOUR EQUIPMENT CALL TODAY! 888-433-5426

Page 48 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Shawn Baker of Cagle Enterprises in Comanche, Texas seems to be pretty interested in this Volvo L120 wheel loader.

Kevin Thompson of Big “T” Construction Services in Marshall, Texas, is going to bid on this John Deere 700J dozer.

Vaughan Draws 800 In-Person, Online Bidders to Auction

aughan Auction Group held an auction on Dec. 6, in Wills Point, Texas. The company had sales of 4.8 million with approximately 800 bidders in-person and live internet bidding. Vaughan sold equipment to buyers from Malaysia, Jordan, Mexico, Guatemala, Bolivia, and Peru. Prices held and Vaughan was extremely pleased with the activity. The company looks forward to its next auction in February.

Jim Whitton, an independent contractor in Canton, Texas, thinks this Cat D3 dozer would be just the machine for building ponds.

Benney Hooker, independent contractor from Yantis, Texas, has just finished giving this Cat D6N a good “once-over.”

Kyle Norman, Norman Excavation and Trucking LLC in Canton, Texas, has been getting the measurements on this Cat 12 H motorgrader.

Jerry Calame, Calame Farms in Wortham, Texas, is interested in this John Deere 700J … the bidding should be hot!

The unexpected cold weather drove many into the new Vaughan Auction indoor bidding area.

Thomas L. Jenkins, retired, Wood County in Yantis, Texas, takes a photo op with this Cat D6R.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 49

Page 50 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX A E D ...............................................................................10

HENDRIX MACHINERY LLC ...........................................3

ALLU GROUP .................................................................11

HYDRAULICIRCUIT TECHNOLOGY.............................24

ATLAS COPCO...............................................................15

INDEXATOR....................................................................25

BAR NONE AUCTION ....................................................43

IROCK CRUSHERS .......................................................21

CAT AUCTION SERVICES

IRON PLANET ................................................................47

FLORIDA .................................................................49

KAWASAKI CONSTRUCTION MACHINERY............34,35

CEG SCALE MODELS .....................................................9

KOMATSU AMERICA CORP......................................36,37

CLASSIFIEDS .................................................................36 CONSTRUCTION EQUIPMENT COMPANY ................16 CONSTRUCTION EQUIPMENT GUIDE WANTED .................................................................42 FL AUCTION PROMO.............................................39 AUCTION RESULTS...............................................46 CEG CHRISTMAS CARD.......................................30 DARR EQUIPMENT CO .................................................11 DOOSAN INFRACORE AMERICA CORP................32,33 DOOSAN PORTABLE POWER .....................................40 DYNAPAC .......................................................................38 EXODUS....................................................................18,19

LBX.............................................................................26,27 LIUGONG..........................................................................7 LLOYD MEEKINS & SONS AUCTION LUMBERTON NC....................................................45 METSO MINERALS........................................................21 MIDCO DEMOLITION TOOL CO ...................................15 NORAM ...........................................................................41 RECS-BAYONET BREAKER ...........................................6 REMU SCREENING TECHNOLOGY ............................20 ROAD BUILDERS MACHINERY...................................5,6 ROAD MACHINERY CO ................................................52

FELLING TRAILERS.......................................................29

ROLL TECH SYSTEMS....................................................6

FINN ................................................................................14

SCHAEFER ENTERPRISES..........................................36

FLANGE LOCK .................................................................2

SENNEBOGEN...............................................................17

FLECO ATTACHMENTS.................................................24

SUPERIOR INDUSTRIES ..............................................20

FLUID CONTROL SERVICES........................................10

TOM GROWNEY EQUIPMENT INC................................2

GRINDERCRUSHERSCREEN.COM.............................22

TOWMASTER .................................................................31

GROVE CRANE..............................................................51

U-SCREEN......................................................................22

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 15, 2012 • Page 51

Built to per perform form Gr Grove ove mobile telescopic cranes Grove all-terrain, rough-terrain and truck cranes are long-lasting and hard-working. High performance features help execute even the most challenging lifting jobs with strength, precision and control. Our cranes offer the versatility to tackle any project, with capacities ranging from 8t to 450t (8.5 USt to 550 USt).

G Grove cranes rrange in capacity

f from 8t to 450t ((8.5 USt to 550 USt)

www.manitowoc.com/cranesdealer Contact yourr dealer or visit www

H&E Equipment Services

Kirby-Smith Machinery, Inc.

Western Pacific Crane & Equipment

www.HE-equipment.com

www.kirby-smith.com

www.wpcrane.com

Salt Lake City, UT 801-974-0388 St. George, UT 435-674-2994 Las Vegas, NV 702-320-6500 Phoenix, AZ 602-232-0600

Oklahoma City, OK 800-375-3339 Tulsa, OK 800-375-3733 Kansas City, KS 877-851-5729 St. Louis, MO 866-279-1392

Missoula, MT 406-728-4842 Belgrade, MT 406-388-2308 Billings, MT 406-259-9720 Boise, ID 208-388-3323

Tucson, AZ 520-770-1120 Albuquerque, NM 505-764-8100 Dallas, TX 972-986-0910 Houston, TX 713-433-6411

8600 Calabash Ave. Fontana, CA 92335 562-286-6618 Fax: 909-356-1340 275 W. Larch Road Tracy, CA 95304 209-597-3824

5909 12th Street East Fife, WA 98424 253-254-7950 91-210 Kalaeloa Blve. Kapolei, HI 96707 808-682-7263

Page 52 • December 15, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Value Priced • Quality Equipment

Call Allen Stokke Today

For more details on our used equipment visit www.roadmachinery.com/equipment

866-400-5250

Dozers

2005 KOMATSU PC400LC-7L, Stk# EMD247, 5281 Hrs, Cab w/AC ........................................................................................$165,000

2011 KOMATSU WA320PZ-6, Stk# EMD005, 615 Hrs, ROPS, Cab ...... ..................................................................................................$165,200

2007 KOMATSU D61EX-15, Stk# EMD290, 3672 Hrs, PAT Blade w/Ripper ..........................................................................$119,000

2001 KOMATSU WA320-3MC, Stk# EMD7052, Cab, 6098 Hrs ...... ..........................................................................................$69,500 All certified machines include a minimum of 30 days powertrain warranty. All certified machines include the following financing (OAC). Subject to change without notice. 12 Months - 3.5% • 24 Months - 4.5% • 36 Months - 5.5% • 48 Months - 6.5%

Year STK#

Hours

Price

KOMATSU D65EX-15EO 2008

EMD7946 3724

CALL

KOMATSU D61EX-15

2007

EMD293 2801

$149,000

KOMATSU D51EX-22

2007

EMD7022 2726

$119,000

KOMATSU D39EX-21A

2007

EMD7786 3678

$59,000

KOMATSU D65EX-15EO 2006

EMD8788 2963

CALL

KOMATSU D39EX-21A

2003

EMD7752 3169

CALL

Excavators Crawlers

Year STK#

KOMATSU PC400LC-7L

2005

EMD247 6012

$165,000

KOMATSU PC400LC-7L

2004

EMD249 6501

$135,000

KOMATSU PC800LC-8

2007

EMD6888 4578

$550,000

KOMATSU PC200LC-8

2008

EMD109 1959

$135,000

KOMATSU PC78MR-6

2006

EMD8662 2950

$52,000

KOMATSU PC200LC-8

2007

EMD229 1713

$142,105

KOMATSU PC200LC-8

2010

EMD7124 1123

$135,000

KOMATSU PC220LC-8

2007

EMD67

2444

$149,000

KOMATSU PC300HD-8

2008

EMD8663 4760

$145,000

KOMATSU PC300LC-7EO 2007

EMD252 4603

$165,000

Wheel Loaders

Year STK#

KOMATSU WA320-3MC

Hours

2006 KOMATSU PC78MR-6, Stk# EMD8662, 2950 Hrs, 18” Road Liner Track, Wain Roy Coupler ..........................................$52,000

Price

Hours

Price

1999

EMD8714 11347

CALL

KOMATSU WA320-3MC

2001

EMD7052 6098

$69,500

KOMATSU WA500-6

2007

EMD7624 6339

$229,000

KOMATSU WA320PZ-6

2007

EMD8244 638

$165,200

KOMATSU WA320-5

2006

EMD7787 4055

$115,000

2007 KOMATSU PC300LC-7EO, Stk# EMD252, 2852 Hrs, New HKX Aux. Hydraulic Thumb/Break It Installed March 2011 ...... $165,000

2008 KOMATSU PC300HD-8, Stk# EMD8663, 4760 Hrs, 31.5” Track, AUX Hydraulics ......................................................$145,000

2007 KOMATSU D39EX-21A, Stk# EMD7786, 3678 Hrs, 6-Way Blade, 18” Shoes, ROPS A/C..............................................$59,000 Corporate Headquarters

Komatsu Remarketing Certified Used Equipment

Arizona

Used Equipment Inquiries Contact

Allen Stokke Used Equipment Manager 866-400-5250 astokke@roadmachinery.com

Komatsu Distributor

www.roadmachinery.com/equipment

For all other inquiries contact your local branch

Gilbert 480-545-2400 Phoenix 602-252-7121 Prescott 928-778-5621 Tucson 520-623-8681

New Mexico Albuquerque 505-345-8383 Farmington 505-324-8601

4710A East Elwood, Suite 6 & 7 • Phoenix, AZ 85040 Phone: 602-252-7121 • Fax: 602-253-9690 www.roadmachinery.com

California Northern California Sacramento 916-375-3540 Redding 530-229-3820 Fremont 510-659-1903

Southern California Perris 909-355-3600 Bakersfield 661-695-4830

Texas

El Paso 915-872-1001

Mexico

Cananea, Sonora 011-52-6453328300