West 25 2014 by Construction Equipment Guide

$3.00

Published Nationally ®

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Western Edition

www.constructionequipmentguide.com

December 13, 2014 • Vol. IX • No. 25 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

Inside

Colorado Dam Project: Creating a Safe Passageway

PIRTEK Expands Wi th Broadway Facil ity...23

Hamilton Construction Company began work as the CM/GC on the Bend Park and Recreation Colorado Dam Safe Passage Project in October, working with OTAK Engineering on the design for the past 18 months.

Ritchie Sees Big Turnout at For t Wor th Sale...56

Table of Contents ................4 Attachments Section ..15-19 Truck & Trailer Section ........ ......................................33-35

By Lori Tobias CEG CORRESPONDENT

Work is under way on a $9.7 million project that will include restoration of a dam, construction of a pedestrian/cyclist bridge and for the first time in Oregon, the manmade sculpting of a white water course. Hamilton Construction Company began work as the CM/GC on the Bend Park and Recreation Colorado Dam Safe Passage Project in October, working with OTAK Engineering on the design for the past 18 months. The project has been under discussion for about a decade, said Chelsea Schneider, project manager of the Bend Park and Recreation District. That was about the

time the Deschutes River was opened to boaters. “Previously this was mill property,” Schneider said. “No one was getting into the area. Then the mill closed down, and people started to float the river. They were to float to the Colorado Dam and take out. Unfortunately, some people have failed to take out. There were rescue events every summer. Just downstream of the spillway, there is a complete jumble of rip rap. That’s what people can get caught in. They get trapped, even trapped upside down. There was one fatality on the site.” There are four other dams on the Deschutes, but the Colorado Dam is the most dangerous and so it became the top priority, Schneider said.

ARTBA: Roadside Ditches Are Not ‘Waters of the U.S.’ The potential delays and increased costs that would result from extending federal authority to cover roadside ditches would divert resources from timely maintenance activities and potentially threaten the role ditches play in promoting roadway safety, according to the American Road & Transportation Builders Association (ARTBA). The association submitted comments Nov. 14 to the U.S. Environmental Protection Agency (EPA) and Army Corps of Engineers (Corps) opposing a proposed regulation that would alter the definition of “waters of the United States” and expand federal regulation to cover virtually any wet area in the country — including roadside ditches. ARTBA explained that while current federal regula-

see DAM page 32

see DITCHES page 54

Government to Deliver Early Holiday Present?

Recycling Section ........41-49 Auction Section ..........52-59 Business Calendar ............57 Advertisers Index ..............58

The U.S. House of Representatives passed late Wednesday, Dec. 3, the Tax Increase Prevention Act. Among the 50 expired tax breaks the bill would extend is a reinstatement of the 50 percent depreciation bonus

for 2014 and an increase of the Section 179 expensing levels this year to $500,000 with a $2 million phase-out cap. Both of these tax breaks expired Dec. 31, 2013. At press time, the Senate on Dec. 10 was expected to take up and pass

the bill, which would then go to the president to sign. In addition to affecting equipment purchases made in 2014 retroactively, this bill would in effect create a window for last-minute purchases made prior to Dec. 31, 2014, to be included.

Visit www.constructionequipmentguide.com for continuing updates on this measure. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Page 2 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

1985! e c n i S

CUSTOM HYDRAULIC KITS TO OPERATE ATTACHMENTS FOR EXCAVATORS & TRACTOR-LOADER-BACKHOES

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

ENGINEERED TO PERFORM DURABLE BY DESIGN ypicall .200” wall thickness

s Kits to operate most any attachment s Welded tube ends for maximum strength & durability s OEM style ORFS or CD62 4-bolt flange s Higher safety standards s Efficient designs with fewer connections

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

s Add on/custom valves

^^^ OJ[RP[Z JVT -S\PK +YP]L 4J+VUV\NO .( ZHSLZ'OJ[RP[Z JVT - S \ P K + Y P ] L 4 J + V U V \ N O . ( Z H S L Z ' O J [ R P [ Z J V T

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 3

"In Business for over 32 Years" www.hendrixmachineryllc.com 2006 John Deere 135C, Stk#: 9613, EROPS, A/C, 1,915 hrs., 36" Bucket w/Hyd. Thumb, 24" Pads, 8' 7" Wide ..................................$49,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla 2005 JLG G10-55A, Stk#: 9630, 10,000 lbs., 55 Español ft., 4WD, 4WS, 5,692 hrs., 48" Forks, 74" Frame, Aux. Hyd., 4 Cyl. JD Eng ......................$52,500

1967 Cat D6C, Stk#: 9583, OROPS, Sweeps, Rear Screen, St/Tilt Blade, 22" Pads, 10' 6" Wide. ....................................................$25,500

2007 Ingersoll-Rand SD45D TF, Stk#: 9516, 54" Smooth Drum, 472 hrs., 12.4x24 Tires, 4 Cyl. Cummins Eng ......................................$29,500

2005 Case 550H, Stk#: 9607, OROPS, Sweeps, Rear Screen, 6 Way Blade, 3,943 hrs., 20" Pads, 4 Cyl. Case Eng., 9' 2" Wide. ................$26,500

2011 JLG 10042, Stk#: 9548, 10,000 lbs., 42 ft. 3,023 hrs., 4WD, 4WS, Aux. Hyd., 48" Forks, 74" 2013 Case 85C, Stk#: 9606, (New) EROPS, A/C, Frame, 17.5x25L-2 Tires, 4 Cyl. Cummins Eng. .. Heat, 8 hrs., 4X4, 280/85Rx24 Front Tires, ............................................................$79,500 420/85Rx30 Rear Tires, 4 Cyl. Case Eng$46,500

2006 John Deere 9520, Stk#: 9343, EROPS, A/C, FM Stereo, 7,177 hrs., 76x50.00B32 or 1250/45B32 Tires, JD Eng., 12' Wide, 11' 7" Height, Bucket, 6 Cyl., 11' 4" Height ..$125,000

2007 Doosan D35S2, Stk#: 9565, 8,000 lbs., 15 2012 John Deere 210G LC, Stk#: 9418, EROPS, ft., 1,690 hrs., 48" Forks, 48" Frame, 8.25x15 A/C, FM Stereo, 2,879 hrs., 42" Bucket, 32" Pads, Front Tires, 7.00x12 Rear Tires, 6 Cyl. Doosan Diesel Eng. ..........................................$15,500 10' 6" Wide ............................................$132,500

2011 John Deere 650J LT, Stk#: HR-88, OROPS, Forestry Package, 6 Way Blade, 80% 2007 Gehl RS8-42, Stk#: 9452, 8,000 lbs., 42 Ft., 3,851 hrs., 4WD, 4WS, 48" Forks, 66" Frame, U/C, 2,453 hrs., Ripper Valve, 18" Pads, Height 9' 5", Width 8' 9', Width Track to Track 6' 7" ...... 13.00x24 Foam Filled Tires, Hyd. Self Leveling ............................................................$79,500 System, 4 Cyl. JD Eng. ........................$32,500

2006 R&D Tag A Long, Stk#: 9629 ......$4,900

2006 Case 570M XT, Stk#: 9634, OROPS, 4WD, 2002 JLG G9-43A, Stk#: 8879, 9,000 lbs., 43 ft., 2008 Cat D6T LGP, Stk#: 9489, EROPS, A/C, St/Tilt Blade, 9,247 hrs., 36" Pads, 13' 2" Wide .. 2,567 hrs., 7 ft. Box Blade w/Scarfiers, 12x16.5 5,262 hrs., 4WD, 60" Forks, 74" Frame, 13.00x24 ..........................................................$129,500 Front Tires, 19.5x24 Rear Tires............$24,500 Foam Filled Tires, 4 Cyl. JD Eng ..........$34,500

2006 John Deere 700J LGP, Stk#: HR-364, EROPS, A/C, Sweeps, Rear & Side Screens, 6 Way Blade, 6,062 hrs., 30" Pads, 11 ft. Wide $65,000

2006 Case 420, Stk#: 9624, OROPS, 1,974 hrs., 72" Bucket, Aux. Hyd., 388x538x8473 Tires, 4 Cyl. Case Eng ......................................$16,500

2007 Ingersoll-Rand SD77DX, Stk#: 9382, 66" Smooth Drum, 275 hrs., 14x9x24 Tires, 4 Cyl. Cummins Eng., 9' 4" Height. ................$61,500

2000 Ford F750, Stk#: 9631, A/C, FM Stereo, 2007 Ditch Witch RT40, Stk#: 9435, OROPS, 28,745 Miles, 5,499 hrs., International Eng., 4WD, 1,227 hrs., 64" Push Blade, Side Shift Boom, 6" Trench, 3 Cyl. Deutz Diesel Eng $14,500 11Rx22.5 Tires ....................................$33,500

2009 Volvo G930, Stk: #9246, EROPS, A/C, FM Stereo, 5,505 hrs., 14 ft. Blade, Rear Ripper, 14.00x24 Tires, 10' 9" Height, 8 ft. Wide, 6 Cyl. Volvo Eng ............................................$119,500

2008 Cat D6T XL, Stk#: 9526, EROPS, A/C, Sweeps, SU Tilt Blade, 6,609 hrs., 24" Pads, PA56 Winch........................................$159,500

2006 Cat D6R III XL, Stk#: 9113, EROPS, A/C, Sweeps, Rear Screen, Angle Blade, 6,078 hrs., 80% U/C, 24" Pads, 10' 8" Wide ........$129,500

2008 Lull 1044C-54, Stk#: 9453, 9,000 lbs., 42 ft., 6,946 hrs., 4WD, 4WS, 48" Forks, 51" Tilt 2001 Cat 160H, Stk#: 9485, EROPS, A/C, FM Frame, 14.00x24TG Foam Filled Tires, Hyd. Self Stereo, 6,070 hrs., 17.5x25L-2 Tires, 14 ft.M/B, Leveling System, 4 Cyl. JD Eng. ..........$46,500 9 ft. Wide............................................$109,500

2001 JLG 400X, Stk#: 9234, 500 lbs., 40 ft., 5,686 hrs., 4WD, 12x16.5 Tires, 3 Cyl. Deutz Diesel Eng. ..........................................$21,500

No Photo Available

2009 Komatsu PC78US-6NO, Stk#: 9178, EROPS, A/C & Heat, FM Stereo, 2,438 hrs., 18" 2012 Cat 272C, Stk#: 9625, EROPS, A/C, 352 Rubber Tracks, 36" Bucket, 7' 7" Blade, 4 Cyl. hrs., Aux. Hyd., 72" Bucket, 12x16.5 Tires, 4 Cyl. 2007 Multiquip, Stk#: 8596, 85-89 KVA, 4,919 Cat Eng ................................................$39,500 hrs., St225x75Dx15 Tires, 4 Cyl. JD Eng$24,500 Komatsu Eng. ......................................$56,500

2011 Kawasaki 4010 Mule, Stk#: 9615, 1,074 hrs., 4x4, Four Passenger, 23x11.00x10 Tires, 3 Cyl. Kawasaki Diesel Eng ........................$6,500

2007 John Deere 450J LGP, Stk#: 9340, OROPS, 6 Way Blade, 5,631 hrs., 24" Pads, 9' 7" Wide ................................................$39,500

2001 Cat D250E-2, Stk#: 9595, EROPS, A/C, 9,294 hrs., 23.5x25 Tires ....................$42,500

2012 Bobcat T650, Stk#: 9562, EROPS, A/C, FM 2013 Case SV185, Stk#: 9525, OROPS, 4 hrs., Stereo, 2,896 hrs., 78" Bucket w/Teeth, 18" 64" Bucket, Aux. Hyd., Hyd. Quick Coupler, 4 Cyl. Rubber Tracks, Aux. Hyd., 4 Cyl. Kubota Eng. .... CNH Eng ..............................................$38,500 ............................................................$39,500

2006 Skytrak 6042, Stk#: 9266, 6,000 lbs., 42 Ft., 2,320 hrs., 4WD, 4WS, 48" Forks, 48" Frame, 2008 Club Car XRT 1550, Stk#: 9537, 4WD, Aux. Hyd., 13.00x24 Foam Filled Tires, Hyd. Self 1,283 hrs., 25x11.00x12 Tires, 2 Cyl. Gas Eng .... Leveling System, 4 Cyl. Cummins Eng...$34,500 ............................................................ $75,000

Page 4 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WESTERN EDITION

IN THIS ISSUE

To read these stories and many more, visit www.constructionequipmentguide.com

SPECIAL SECTION 41 RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling,

28 LIEBHERR CONSTRUCTION OPENS WESTERN U.S. SPARE PARTS DEPOT Liebherr Construction Equipment Co. announced the opening of a new spare parts facility located in Visalia, Calif. The new depot is expected to begin operations in early 2015.

crushing and screening.

33 FELLING TRAILERS CELEBRATES 40 YEARS WITH WEEKEND OF EVENTS

FEATURES 8

HOUSTON CONTRACTOR SHORES PIPELINE AT

To celebrate its 40th anniversary, a community open house with lunch was held on Oct. 24. On Oct. 25, the Statewide Tour of Manufacturing and an employee/family open house were held.

PHILLIPS 66 HQ

Circulated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

Founder, Publisher & CEO Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Christine Wolkin Pete Sigmund John Pinkerton Tom Weinmann Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site www.constructionequipmentguide.com Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com For advertising rates: Contact Kent Hogeboom National Sales Manager 315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com Contact Dale Agnew

• Colorado • Louisiana • Oklahoma • Texas

Toll Free 877/877-4997 Fax 972/695-6049 e-mail dagnew@cegltd.com

Whoever coined the phrase, “space is at a premium,” probably wasn’t talking

50 NPK CONSTRUCTION’S JOSEPH R. OBERGAS

about installing pipe in the ground. However, that adage could certainly be applied

PASSES AWAY

to a recent excavation and pipe installation project at the site of Phillips 66’s new

“Over Joe’s 26 year career at NPK he always tried to do more for our customers and dealers than they expected. Joe’s willingness to go the extra mile raised the bar for us all,” said NPK President Dan Tyrrell. “His humor and caring nature will be missed.”

Contact Dennis Hogeboom

IN HISTORY

56 MORE THAN 3,600 PARTICIPATE IN RITCHIE’S

Contact Patrick Kiel

HOLT CAT, the Caterpillar Equipment and Engine dealer of south, central, north and

FORT WORTH SALE

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com

Global Headquarters in West Houston, Texas.

12 HOLT CELEBRATES LARGEST HQ EXPANSION

north east Texas, held an open house Dec. 3 to celebrate the completion of its 40,000 sq. ft., heavy equipment service facility.

More than 3,600 bidders participated online and in person at Ritchie Bros. Auctioneers’ multi-million dollar unreserved public equipment auction in Fort Worth, Texas, Dec. 3 to 4.

14 CASHMAN AMONG FIRST CAT DEALERS TO GAIN CERTIFICATION Achieving it required approximately 15 months of preparation, including the

EQUIPMENT

creation of a formal employee training program, an overhaul of every area of the

36 MIDCO MD21 and MD32 Hammer Models

rebuild center, development of multiple standard operating procedures (SOPs), and

41 CAT 826K Landfill Compactor

acute attention to cleanliness and organization.

42 FECON RTF230 Rubber Tire Mulching Tractor

23 PIRTEK EXPANDS WITH BROADWAY FACILITY IN TEXAS PIRTEK, provider of onsite hose replacement service and dedicated to minimizing equipment downtime, has recently opened its newest Hose Service center in San Antonio, Texas. The addition of this new Center increases the number to five locations servicing the state of Texas with three locations in Dallas and one in Houston.

DEPARTMENTS 50 CLASSIFIEDS 52 COMING AUCTIONS 57 BUSINESS CALENDAR

• Arizona • California • Hawaii • Nevada • New Mexico • Utah

602/679-8759 e-mail dennishogeboom@cegltd.com • Idaho • Montana • Oregon • Washington • Wyoming

Mobile

Facebook

Twitter

YouTube

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/5232200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 5

ALASKA

Delta Industrial Services www.deltaindustrial.com Fairbanks Delta Junction (907) 452-5053 (907) 895-5053 ARIZONA

Bejac Corporation www.bejac.com PHOENIX (800) 77-BEJAC CALIFORNIA

Bejac Corporation www.bejac.com PLACENTIA (800) 77-BEJAC

SAN FRANCISCO (800) 77-BEJAC

SACRAMENTO (800) 77-BEJAC

FRESNO (800) 77-BEJAC

REDDING (800) 77-BEJAC

SAN DIEGO (800) 77-BEJAC

IDAHO

Central Equipment Company www.centralequipmentidahosales.com POCATELLO JEROME (208) 233-2850 (208) 324-8515 (888) 617-2815 MONTANA Westate Machinery www.westate.com BILLINGS 406-373-6010 (800) 999-6676 NEVADA Liebherr Mining Equipment www.liebherr.us ELKO (775) 738-7386

Bejac Corporation RENO (800) 77-BEJAC TEXAS Nueces Power Equipment www.nuecespower.com CORPUS CHRISTI EDINBURG (361) 289-0066 (956) 702-0066 VICTORIA (361) 576-0066

EL PASO (915) 541-0066

LAREDO (956) 725-0066

SAN ANTONIO (210) 310-0066

True Power.

At Liebherr, we don’t just build machines. We custom-engineer them to perform as efğciently as possible. Our new PR 736 dozer is a perfect example. Its Tier 4F emissions system was designed from the ground up and it’s practically maintenance free. The electronic drive system automatically adjusts to keep operators in the “sweet spot” — even when saving fuel in ECO mode. And like all our machines, the PR 736 is built to last with exclusive Liebherr components.

SAN BENITO (956) 361-0066

We haven’t compromised on anything; why should you?

Liebherr Equipment Source

liebherr.com

www.liebherrequipmentsource.com HOUSTON, TX (866) 961-9358 WYOMING

Liebherr Mining Equipment www.liebherr.us GILLETE (307) 686-0948

Page 6 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LEARN MORE ABOUT THE COMPLETE LINE OF

SULLAIR PORTABLE AIR COMPRESSORS

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN. Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:

At: SULLAIR.COM • Durable Rotary Screw Design • Sullair Certified REMAN Units Available • Plus, a Full Line of Premium Air Tools

• Lower your cost of ownership M • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.

WEST KOMATSU DISTRIBUTORS

Bacon-Universal Company, Inc. www.baconuniversal.com HI Hilo 808-935-8595 • 800-352-3508 Honolulu 808-839-7202 • 800-352-3508 Kailua-Kona 808-326-1212 • 800-352-3508 Kauai (Lihue) 808-245-8472 • 800-352-3508 Wailuku Maui 808-244-9158 • 800-352-3508

8 I

Clairemont Equipment Co.

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

www.clairemontequipment.com CA Escondido 760-739-9100 Fontana 909-429-9100 Imperial 760-355-7700 Indio 760-863-5558 San Diego 858-278-8351

B 8

Craig Taylor Equipment Company 8 F

Kirby-Smith Machinery Inc. www.kirby-smith.com OK Oklahoma City 405-495-7820 • 800-375-3339 Tulsa 918-438-1700 • 800-375-3733 TX Abilene 325-692-6334 • 877-577-5729 Amarillo 806-373-2826 • 800-283-1247 Dallas 214-371-7777 • 800-753-1247 Ft. Worth 817-378-0600 • 877-851-9977 Lubbock 806-745-2112 • 866-289-6087 Odessa 432-333-7000 • 877-794-1800

Power Motive Corporation www.powermotivecorp.com CO Colorado Springs 719-576-5541 Denver 303-355-5900 Durango 970-259-0455 • 970-259-0456 Grand Junction 970-241-1550 Milliken 970-587-1188 WY Cheyenne 307-634-5149

www.craigtaylorequipment.com AK Anchorage 907-276-5050 • 800-279-5051 Fairbanks 907-452-1192 • 800-452-1192 Soldotna 907-262-5977 • 800-254-5977 Wasilla 907-376-3838 • 800-973-2607

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 7

Komatsu Equipment Co. www.komatsueq.com NV Elko 775-753-7557 North Las Vegas 702-399-1004 Sparks/Reno 775-356-1334 UT Hurricane/St. George 435-986-1000 Pleasant Valley 435-216-7777 Salt Lake City 801-972-3660 • 1-877-Komatsu South Jordan 801-972-3660 WY Casper 307-682-1445 Gillette 307-682-1445 Rock Springs 307-686-1300

Modern Machinery, Inc. www.modernmachinery.com ID Boise 208-336-8570 • 800-221-5211 Pocatello 208-233-5345 • 800-829-4450 MT Billings 406-252-2158 • 800-735-2589 Kalispell 406-755-5540 • 800-434-4190 Missoula 406-523-1100 • 800-332-1617 OR Eugene 541-688-7321 • 800-826-9811 Portland 971-222-1710 • 800-950-7779 WA Kent 253-872-3500 • 800-669-2425 Rochester 360-273-4284 • 800-304-4421 Spokane 509-353-1654 • 800-541-0754

Road Machinery, LLC www.roadmachinery.com AZ Gilbert 480-545-2400 Phoenix 602-252-7121 Prescott 928-778.5621 Tucson 520-623-8681 • 800-989-8681 CA Bakersfield 661-695-4830 Fremont 510-659-1903 Fresno 916-350-0640 Perris 909-355-3600 Redding 530-229-3820 Pico Rivera 562-699-6767 West Sacramento 916-375-3540 TX El Paso 915-872-1001 NM Albuquerque 505-345-8383 Farmington 505-324-8601

Waukesha-Pearce Industries, Inc. www.wpi.com TX Beaumont/Port Arthur 409-721-5305 Buffalo 903-322-7150 Corpus Christi 361-884-8275 Edinburg 956-386-0107 Houston 713-723-1050 Kilgore 903-984-2011 Pflugerville 512-251-0013 San Antonio 210-648-4444 Tomball 281-351-9016

Page 8 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Houston Contractor Shores Pipeline at Phillips 66 HQ By James McRay

Gowan Mechanical Services, a subsidiary of EMCOR Group, is Houston’s largest single-source provider of premier construction, tenant build-outs, fabrication, HVAC contracting, and mechanical services. For more information, visit www.gowaninc.com. With Texas branch offices in Houston and Dallas/Ft. Worth, plus branch offices in Florida and Chicago, Efficiency Shoring & Supply is an official Efficiency Production Inc. factory-direct sales and rentals company. For more information, call Efficiency Shoring & Supply, 877/452-6859 or visit www.efficiencyshoring.com.

SPECIAL TO CEG

Whoever coined the phrase, “space is at a premium,” probably wasn’t talking about installing pipe in the ground. However, that adage could certainly be applied to a recent excavation and pipe installation project at the site of Phillips 66’s new Global Headquarters in West Houston, Texas. Contractor Gowan Mechanical Services of Houston was recently contracted to install HVAC and other mechanical piping at the new office building project. The route for two 24 in. (61 cm) underground chilled water supply and return lines needed to be installed 300 ft. (91 m) running from the complex’s physical plant located near the parking garage, to the base of the office buildings where it ties into the air conditioning system for all the new office buildings.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Trench Shoring Required for Shallow Excavation Installing a simple underground piping system would normally be a snap for Gowan, however for this project, Phillips required the 10 ft. (3 m) deep trench to remain open for its entire length so inspections could be made. Even with that stipulation, the excavation project would have been fairly routine if not for the fact that the route passed directly next to the parking garage on one side, and a very congested area on the other. The tight path prevented traditional trench protection measures such as benching or sloping. Site conditions being as they were, Gowan needed a manufactured trench protection system; either trench shields or shoring. “When faced with these types of trenches, trench boxes are usually the most efficient method of protection,” said Ray Roberts, shoring specialist of Efficiency Shoring & Supply’s Houston branch office. “This pipeline also had a 90 degree turn on each end which also needed to be shored or shielded,” Roberts added.

framed aluminum trench shields in total. “It wasn’t so much the soil conditions that made the project difficult but rather finding the right shoring system that could shore the turns and nearby footings,” said Daniel Stavinoha, Gowan’s project superintendent. “Handrails on the open trench were also essential for the site’s safety requirements and Efficiency Shoring had handrails that attached right to the top of both the steel and aluminum boxes,” Stavinoha said.

Trench Shields Perfect Solution for Trench Protection in Congested, Crowded Spots Efficiency Shoring & Supply rented and supported the trench safety equipment for the project. Efficiency started by supplying the longest practical trench shields available in its fleet, a series of 20 ft. (6 m) long trench boxes. However, the mobile crane being utilized for the project could not lift the weight of the 10 x 20 trench shields as the shoring process progressed. Efficiency then switched to shorter trench boxes — 10 x 12 steel shields — for the rest of the straight run; providing more than 20 steel or steel-

Efficiency Shoring & Supply Supply Equipment and Customer Support To safely shore the 90 degree turns at each end of the pipeline trench, Gowan utilized an Efficiency Production manufactured BuildA-Box modular aluminum trench shielding system. The highly flexible modular BuildA-Box components are specifically designed to accommodate unusual shoring situations such as a 90 degree turn in a trench. “Deliveries have been on-time and their field reps have been very responsive,” Stavinoha added about Efficiency Shoring & Supply.

The excavation project would have been fairly routine if not for the fact that the pipeline passed directly next to the parking garage on one side, and a very congested area on the other.

To safely shore the 90 degree turns at each end of the pipeline trench, Gowan utilized an Efficiency Production manufactured Build-A-Box modular aluminum trench shielding system which is specifically designed to accommodate unusual shoring situations such as turns in the trench.

The mobile crane Gowan utilized was unable to lift the longer, heavy steel trench shields, so shoring distributor Efficiency Shoring & Supply supplied a series of lighter weight aluminum trench boxes.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ December 13, 2014 â&#x20AC;˘ Page 9

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

2002 Komatsu PC95R-2: #50051, Cab/Heat, 20â&#x20AC;? Tracks, Aux Hyd, Blade, 1950 Hrs ............$69,500

2001 Komatsu PC138US-2: #80876, Cab/AC, 8â&#x20AC;&#x2122;6â&#x20AC;? Arm, 4550 Hrs............................................$59,500

2004 Komatsu PC160LC-7: #81899, Cab/AC, Aux Hyd, 5100 Hrs............................................$84,500

2003 Komatsu PC200LC-7: #92106, Cab/AC, 9â&#x20AC;&#x2122;7â&#x20AC;? Arm, 31.5â&#x20AC;? Tracks, Aux Hyd, 6300 Hrs ....$79,500

2006 Komatsu PC200LC-8: #82111, Cab/AC, 9â&#x20AC;&#x2122;7â&#x20AC;? Arm, 31.5â&#x20AC;? Tracks, KOMTRAX, 4100 Hrs$121,500

2001 Komatsu PC220LC-6: #80381, Cab/AC, 60â&#x20AC;&#x2122; Long Front, 60â&#x20AC;? Long Front, 60â&#x20AC;? Ditching Bkt, 5700 Hrs ..................................................$139,500

2007 Komatsu PC220LC-8: #81992, Cab/AC, 9â&#x20AC;&#x2122;7â&#x20AC;? Arm, KOMTRAX, 7350 Hrs........................$99,500

2006 Komatsu PC228USLC-3: #82164, Cab/AC, JRB QC, Hyd Thumb, 4550 Hrs ..............$139,500

2008 Komatsu PC270LC-8: #91822, Cab/AC, 11â&#x20AC;&#x2122;6â&#x20AC;? Arm, 31.5â&#x20AC;? Tracks, JRB QC, 10,150 Hrs ..$99,500

1999 Komatsu D41P-6: #5952, Cab/AC, 28â&#x20AC;? Tracks, PAT Blade, 4750 Hrs......................$59,500

2005 Komatsu D61EX-15: #91765, Cab/AC, 24â&#x20AC;? Tracks, PAT Blade, 2650 Hrs ..................$134,500

2008 Komatsu D65EX-15EO: #81377, Cab/AC, 24â&#x20AC;? Tracks, Drawbar, 3300 Hrs ..............$159,500

Page 10 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The GMK6300L all-terrain crane At Grove, we provide high-performance features, reliable 24/7 support and a quality product lineup – because cranes are all we do. With 17 all-terrain models ranging from 40-450 USt, we’ve got a crane to handle any jobsite. Featured is the GMK6300L – its 350 USt capacity, 263 ft. boom, Allison transmission and MEGATRAK™ suspension system are ideal for a wide range of applications and will keep you working.

Tilt cab

MEGATRAK™

Removable outrigger box

LEADERS IN LIFTING For more information, visit www.manitowoccranes.com

Kirby-Smith Machinery, Inc.

Western Pacific Crane & Equipment

www.kirby-smith.com

www.wpcrane.com

Oklahoma City, OK 800-375-3339 Tulsa, OK 800-375-3733 Kansas City, KS 877-851-5729 St. Louis, MO 866-279-1392

8600 Calabash Ave. Fontana, CA 92335 562-286-6618 Fax: 909-356-1340 275 W. Larch Road Tracy, CA 95304 209-597-3824

5909 12th Street East Fife, WA 98424 253-254-7950 91-210 Kalaeloa Blvd. Kapolei, HI 96707 808-682-7263

5801 Silverado Way Anchorage, AK 99518 855-342-7263 3521 Alken Street Bakersfield, CA 93308 855-927-2637

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 11

Page 12 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

HOLT Celebrates Largest HQ Expansion in History HOLT CAT, the Caterpillar Equipment and Engine dealer of south, central, north and north east Texas, held an open house Dec. 3 to celebrate the completion of its 40,000 sq. ft., heavy equipment service facility. The $11 million expansion is part of a $100 million HOLT investment plan to upgrade facilities, open new full-service locations, and ensure technicians are equipped with advanced tools and technologies in order to provide outstanding service to customers. This development represents the single largest expansion to HOLT’s San Antoniobased headquarters at 3302 S WW White Road in decades. The new building, which replaces a smaller service shop, will be a climate-controlled facility that will provide an improved work environment for technicians. “Demand for the heavy equipment repair and rebuild services HOLT provides is surging as a result of the shale boom and resurgence in manufacturing and infrastructure projects,” said Peter M. Holt, CEO of HOLT

CAT. “Our locations across the state are showing robust growth as a result — in fact, 2014 has been one of the strongest years ever for our business.” Many of HOLT’s customers choose to have their heavy equipment rebuilt instead of purchasing an entirely new machine in order to manage capital costs. Key machine components are inspected and replaced, and the machine is returned to service in like-new condition. The new facility will include advanced capabilities to manage these rebuilds. The facility will serve customers located across south and central Texas. It has eight service bays, featuring four 10-ton (9 t) cranes and four 15-ton (13 t) cranes; monitored oil dispensing in all bays; 150 tons (136 t) of automated HVAC and lighting controls to save energy; and eight BAF-branded fans to reduce electrical consumption. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 13

Page 14 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cashman Among First Cat Dealers to Gain Certification Cashman Equipment is one of the first of 200 Caterpillar dealerships worldwide to receive Cat’s prestigious 5-Star Contamination Control Certification. Achieving it required approximately 15 months of preparation, including the creation of a formal employee training program, an overhaul of every area of the rebuild center, development of multiple standard operating procedures (SOPs), and acute attention to cleanliness and organization. One of the most basic selling points of Caterpillar equipment is that the machines are “built to be rebuilt,” according to the company. Customers are told they will get a second and even third life out of their machines at approximately 60 percent of the cost of buying a new piece of equipment. These statements are qualified through the Cat Certified Rebuild Program, wherein the entire machine is disassembled down to the bare frame and each component (engine, transmission, powertrain, etc.) is examined and

repaired or replaced. When finished, all Cat Certified Rebuild machines receive a new serial number and warranty -— something highly valued by customers. Not only is it virtually a brand new machine ready to work 100,000 or more hours, it also enhances the future resale value as compared to other machines of the same age. Rebuilds are a fundamental part of a Cashman Equipment representative’s promise to the customer. However, Caterpillar studies show that 70 percent of all hydraulic component failures can be traced to some type of contamination. Even the tiniest amount of dirt, dust or other contaminants can wear down a component, potentially causing costly catastrophic failures on the job site. This makes component contamination control in Cashman’s component rebuild center (CRC) one of the most crucial aspects of a rebuild. Caterpillar’s Contamination Control Compliance Program was created in September 2000, implementing

Pressurized room with climate control houses pristine powertrain test bench.

a rigorous set of requirements and guidelines, complete with a Caterpillar audit, in order to ensure that the highest standards of cleanliness are met. “Our Reno CRC is nearly 20 years old, and some of the surrounding facilities are over 30,” said Thomas Shrecengost, Cashman Equipment’s assistant general manager of service. “To

say that it was challenging would be an understatement. Some employees didn’t even think it could be done. However, our Reno CRC team, with the support of nearly every other department at Cashman, was able to create processes and procedures that changed our culture. Because our expectations rose to Cat’s 5-Star level, so did our shop.”

During Caterpillar’s rigorous contamination control audit, 18 areas with five to 10 subsections were inspected, including the equipment wash facility, shop attributes, shop practices, hydraulic cylinder rebuild area, engine dynamometer testing, and more. Cashman Equipment was extremely proud to attain 97.3 percent on this evaluation. One auditor said, “Incredible change from 7/2013 and achieving [bulk fluids] cleanliness without kidney looping.” “The heavy equipment industry landscape is changing,” said Mike Pack, president and COO of Cashman Equipment. “The service and support of a customer makes more of a difference today than it ever has in the past. Achievements like Cat 5-Star Contamination Control show our customers that we will keep changing and evolving to better suit their needs.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

SECTION

Attachment & Parts Pages 15-19

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Hyundai Introduces First Attachment Product Line in N.A. tive and efficient, they’re also highly durable, according to the manufacturer. These models feature only NOK oil seals leading to a longer seal life. On the HDB210 to HDB450 models, an additional square buffer was added to increase the durability of the gas seals, step seals and the piston. This buffer seal also helps to minimize the piston’s shaking action. An optional auto grease bracket mounted system is available on the HDB140 to HDB450 models, which allows for automatic greasing several times a day contributing to longer machine life, particularly for the chisel. Like all Hyundai products, the HDB series breakers are backed by Hyundai’s extensive dealer network. For more information, call 877/509-2254 or visit www.hceamericas.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) Hyundai has introduced its first attachment product line to the North American market: a full line of hydraulic breakers consisting of 13 different models HDB10 through HDB450.

Hyundai Construction Equipment Americas Inc., has introduced its first attachment product line to the North American market: a full line of hydraulic breakers consisting of 13 different models HDB10 through HDB450. Hyundai’s HDB series breakers offer a powerful impact with a large chisel diameter from 1.6 to 6.5 in. (4 to 16.5 cm). Operating weights range from 271 to 8,186 lb. (123 to 3,713 kg) and overall lengths range from 44.4 to 141.5 in. (112.7 to 359 cm). The versatile breakers are suitable for a wide range of applications due to four chisel options — moil, wedge, blunt or conical. Hyundai’s HDB series breakers are engineered with advanced technology for optimum performance despite harsh working conditions. An anti blank firing (ABF) system, which prevents the breaker from continuing to strike once material has been demolished, comes standard on the HDB50-HDB450 models. This system helps protect the chisel pins, tie bolts and front heads from blank firing and increases the service life of all components. When the auto control valve is turned on, breaker operation will automatically start again by giving a small amount of pressure to the chisel. Automatic stop will take place once the chisel is lifted up or after breaking. For maximum productivity, a two stroke selector system comes standard on the HDB50-HDB180 models. This feaHyundai’s HDB series breakers offer a powerful ture allows operators to change from long to short strokes impact with a large chisel diameter from 1.6 to 6.5 in. according to their preference and the job at hand. (4 to 16.5 cm). Not only are the HDB series breakers advanced, produc-

Side-Shift Carriage Enables Pallet Lifts

The 50-in. (127 cm), 12,000-lb. (5,443 kg) capacity side-shift carriage enables operators to pick and place an assortment of palletized materials, and offers 4 in. (10 cm) left and right carriage shift for more precise load placement. Weighing 1,155 lbs. (524 kg), the carriage is compatible with JLG and SkyTrak telehandlers, as well as various fork options and pin-on attachments.

Page 16 • December 13, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

CEAttachments Offers 10-Foot Edge Oscillating Snow Push CEAttachments Inc., a global supplier of attachments and accessories for compact equipment, has added a new 10-ft. Edge oscillating snow push model to the lineup of snow removal attachments for any brand or model skid steer or track loader. The Edge 10-Foot oscillating snow push is the largest size available, with a capacity of 226 cu. ft. (6.4 cu m). This versatile attachment also can be used year-round in any climate for moving other materials such as flood cleanup wastewater, manure and more. This model pusher features a heavy-duty frame that oscillates up to 8 degrees along uneven surfaces, keeping the edges in contact with the surface being cleared. Floating side plates and frame links allow the pusher weight to be transferred onto the edge for maximum clearing. The 1.5 by 10 in. (3.8 by 25.4 cm) reversible, replaceable rubber edge offers 3 in. (7.6 cm) of wear on each side, providing long-lasting clearing throughout the season. An optional pull-back kit allows for down pressure on the rubber edge to draw snow or other materials away from confined spaces such as loading docks or buildings. Edge oscillating snow pushes are available in widths of 7-, 8-, 9-, and now the 10-ft. (2.1, 2.4, 2.7 and 3m), with optional pull back kits that include a rubber cutting edge in each size. For more information, call 866/232-8224 or visit www.ceattachments.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The Edge 10-Foot oscillating snow push is the largest size available, with a capacity of 226 cu. ft. (6.4 cu m).

Genesis Promotes Palvere to National Account Manager Genesis Attachments has promoted Justin Palvere to national account manager — demolition. In this newly formed role, Palvere, previously the Genesis southeast regional manager, will develop, manage and maintain programs and services designed to meet the needs of demolition contractors. “Genesis has a broad range of attachments that help contractors complete projects on time and budget,” said Shane Kuhlmey, Genesis director of North American sales. “Appointing Justin to this position reinforces our commitment to the industry.” Palvere also will continue in his regional manager role until a successor is named. For more information, call 715/3955252 or visit genesisattachments.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Justin Palvere will develop, manage and maintain programs and services designed to meet the needs of demolition contractors.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • December 13, 2014 • Page 17

THE MUST-ATTEND EVENT FOR AUTHORIZED EQUIPMENT DEALERS & THE INDUSTRY’S TOP SUPPLIERS IS BACK AND BETTER THAN EVER! FEATURING A NEW FOCUS ON DISTRIBUTOR SPECIFIC EDUCATION,EXPANDED NETWORKING OPPORTUNITIES & AN UPDATED OUTLOOK ON INDUSTRY TRENDS.

Page 18 • December 13, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Got MATERIALS to Move? No matter what your material, Pemberton has the bucket, grapple or forks to handle it and we can fit it to your specific wheel loader or excavator. We have the attachment you need for construction, demolition, logging and scrap material or waste handling.

Contact Pemberton today to see how we can help you maximize your equipment and your manpower.

Surf the Internet The News, Equipment and all the information you need to keep up with the Construction industry at Whatever Your Application: RECYCLING • LOGGING • CONSTRUCTION • AQUATIC • WASTE HANDLING • DEMO • SCRAP • ROAD & BRIDGE We Have Your Attachment: GRAPPLES • BUCKETS • CRUSHERS • RAKES • SHEARS • FORKS • CUSTOM ENGINEERING

CLICK OR CALL TODAY! PEMBERTONATTACHMENTS.COM • 1-800-393-6688

www.construction equipmentguide.com

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • December 13, 2014 • Page 19

Page 20 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

THE BASE OF INNOVATION March 17-19, 2015 t Baltimore, Maryland

Pre-register now and save: www.worldofasphalt.com

T WO GREAT SHOWS IN ONE

R U O L Y A I E T Z I N E M I T T O P P O E C N A M R O F PER Optimize your performance potential and learn from the experience of aggregate industry professionals, who will share their knowledge in education sessions covering virtually every aspect of the industry. ȏ 6HH WKH ODWHVW LQQRYDWLRQV LQ HTXLSPHQW DQG WHFKQRORJ\ ȏ 1HWZRUN ZLWK \RXU SHHUV DQG UHQHZ ROG DFTXDLQWDQFHV ȏ /HDUQ IURP LQGXVWU\ H[SHUWV LQ $** $FDGHP\ȇV education sessions Visit agg1.org for more information.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 21

Rugged terrain, extr eme climates, rremote emote locations. extreme LiuGong machines ar e developed to excel in the are toughest conditions which makes them your true rreputation eputation builders builders.. www.liugongna.com www.liugongna.com T O U G H W O R L D . T O U G H E Q U I P M E N T. T.

WE WE NOT NOT ONLY ONLY Y GO G TO EXTREMES, EXT XTREMES, IT’S TO WHERE WE WE DO WHERE OUR BEST BEST BE EST WORK. W WO ORK. ORK. OUR

Page 22 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GREAT HOLIDAY GIFTS! International TD-25 Dozer, 1:50 Scale - $85

Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale$85 Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale..........$85 Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale ...... $85 Bobcat E35 Compact Excavator, 1:25 Scale ............................$50 Bobcat E55 Compact Excavator, 1:25 Scale ............................$60 Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ..................$25 Bobcat S175 Skid Steer Loader, 1:25 Scale..............................$65 Bobcat S510 Skid Steer Loader, 1:25 Scale..............................$65 Bobcat S530 Skid Steer Loader, 1:25 Scale..............................$65 Bobcat S550 Skid Steer Loader, 1:25 Scale..............................$65 Bobcat S570 Skid Steer Loader, 1:25 Scale..............................$65 Bobcat T550 Track Loader, 1:25 Scale ......................................$70 Bobcat 225 Compact Excavator, 1:25 Scale ............................$50 Case CX250C Excavator, 1:50 Scale ........................................$195 Case 95XT Skid Steer Loader (Conrad), 1:32 Scale ................$60 Case 850B Dozer (NZG), 1:35 Scale..........................................$120 Case 1102 Vibromax Roller, 1:35 Scale....................................$100 Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer, 1:50 Scale ......................................................................................$100 Caterpillar 775G Off-Highway Truck, 1:50 Scale ....................$110 Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ............$65 Caterpillar D7E Track-Type Tractor, 1:50 Scale ........................$90 Caterpillar D8N Track-Type Tractor (NzG), 1:50 Scale ..........$150 Caterpillar D8T Track-Type Tractor, 1:50 Scale ......................$110 Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ....$75 Caterpillar D10N Track-Type Tractor, 1:50 Scale ......................$50 Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale......$185 Caterpillar D10T Track-Type Tractor, 1:50 Scale ....................$100 Caterpillar D11N Track-Type Tractor (Conrad), 1:50 Scale ..$185 Caterpillar D11R Track-Type Tractor, 1:50 Scale ....................$100 Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale $150 Caterpillar 323D L Excavator, 1:50 Scale ..................................$90 Caterpillar 336D L Excavator, 1:50 Scale ..................................$95 Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..........$50

Caterpillar D6R Track-Type Tractor, 1:50 Scale - $95

Komatsu PC360LC-10 Excavator, 1:50 Scale - $120

All New in Box CALL Toll Free

800-523-2200 Ext. 197 Caterpillar 215 Excavator (NZG), 1:50 Scale ..........................$140 Caterpillar 365B L Series II Excavator, 1:50 Scale....................$75 Caterpillar 963D Track Loader, 1:50 Scale ................................$60 Caterpillar 977 Traxcavator, 1:50 Scale ......................................$60 Caterpillar 988K w/ Grapple, 1:50 Scale ..................................$160 Caterpillar 994H Wheel Loader, 1:50 Scale ............................$215 Demag Tracked Paver (NZG), 1:50 Scale ..................................$75 Doosan Moxy MT31 Articulated Truck ....................................$100 Dynapac SD2500 CS Road Paver, 1:50 Scale ........................$150 Fiat Allis 41B Dozer (Yellow), 1:50 Scale..................................$120 Grove GMK 3050 All Terrain Crane, 1:50 Scale ......................$120 Grove RT750 Rough Terrain Crane, 1:55 Scale......................$100 Grove TM1500 White 12 Axle Truck Crane, 1:50 Scale ........$160 Hamm 3414 Pad Foot Compactor, 1:50 Scale ..........................$90 International 175 Crawler Loader, 4in1, 1:50 Scale..................$65 International 433 Dual Engine Pay Scraper, 1:25 Scale........$225 International 560 Pay Loader, 1:25 Scale ................................$130 International TD-15 Dozer w/Umbrella, 1:50 Scale ..................$60 International TD-20E Dozer, 1:64 Scale ......................................$24 International TD-25 Dozer w/Ripper, 1:25 Scale ....................$180 JCB 3CX Backhoe/Loader, 1:50 Scale........................................$75 John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ......$70 John Deere 200C LC Excavator, 1:50 Scale..............................$45

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

John Deere 47G LC, 1:50 Scale - $80

John Deere 310J Backhoe/Loader, 1:50 Scale ........................$40 John Deere 315SJ Backhoe/Loader, 1:50 Scale ......................$40 John Deere 624J Military Wheel Loader, 1:50 Scale................$40 John Deere 772CH Motor Grader, 1:50 Scale............................$45 John Deere 850K Dozer, 1:50 Scale............................................$65 John Deere 870GP LC Grader, 1:50 Scale ................................$50 John Deere 959K Track Feller Buncher, 1:50 Scale ................$90 Komatsu CK25 Compact Track Loader, 1:50 Scale ................$45 Komatsu D51 EX Dozer, 1:50 Scale ............................................$85 Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ......................$80 Komatsu D65PX-17 Dozer, 1:50 Scale........................................$80 Komatsu D155AX Dozer w/ripper, 1:50 Scale ..........................$95 Komatsu D375A Dozer, 1:50 Scale............................................$125 Komatsu D475A Dozer w/ripper, 1:50 Scale............................$160 Komatsu GD655 Motor Grader, 1:50 Scale................................$90 Komatsu HD605 Off-Highway Truck, 1:50 Scale ......................$80 Komatsu HM250 Articulated Dump Truck, 1:50 Scale ............$75 Komatsu HM400-3 Articulated Truck, 1:50 Scale ..................$100 Komatsu PC200 Excavator, 1:50 Scale........................$160 Komatsu WA470-7 Wheel Loader, 1:50 Scale ..........................$75 Komatsu WA500 Wheel Loader, 1:50 Scale ..............................$80 Komatsu WB146 Backhoe/Loader, 1:50 Scale ........................$75 Komatsu WH613 Telehandler, 1:50 Scale ..................................$65 Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ......$90 Leeboy 785 Motor Grader, 1:64 Scale ........................................$90 Liebherr LTM 1025 Mobile Crane, 1:50 Scale..........................$125 Poclain 160 Excavator, 1:50 Scale ............................................$150 Poclain TC45 Excavator, 1:50 Scale ........................................$140 Vogele 1900-2 Tracked Paver, 1:50 Scale ....................$140 Vogele MT3000 Powerfeeder, 1:50 Scale ................................$140 Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ....................$115 Volvo L220G Wheel Loader, 1:50 Scale ..................................$120 Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale......$120

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 23

PIRTEK Expands With Broadway Facility in Texas

The PIRTEK Broadway team.

PIRTEK, provider of onsite hose replacement service and dedicated to minimizing equipment downtime, has recently opened its newest Hose Service center in San Antonio, Texas. The addition of this new Center increases the number to five locations servicing the state of Texas with three locations in Dallas and one in Houston. PIRTEK Broadway in San Antonio is conveniently located just off I-410 and near the International Airport. Customers will have easy access to the new Hose Service Center where custom built high pressure hoses can be made over-the-counter, while they wait. Carrying a wide range of inventory which includes 3600, 5000 and 6000 psi hydraulic hoses, quick disconnect couplings, adapters, hose clamps, pressure wash hoses, nozzles and wands, pressure gauges and 50 ft. (15 m) utility hoses will make PIRTEK Broadway a one stop shop for many local companies. The Hose Service Center also will act as a home base for three onsite hose workshops that are available 24/7. Just one call to PIRTEK Broadway will get a fully trained hose service technician on their way to a job site within one hour. Each onsite hose workshop is fully equipped and stocked to manufacture hose assemblies on the spot. Onsite service is available around the clock by calling 210/822-0800. The Hose Service Center, located at 9008 Broadway St., San Antonio, Texas 78217, is open Monday through Friday, 8:00 a.m. to 5:00 p.m. and Saturday from 8 a.m. to noon. Rockledge, Florida-based PIRTEK USA is the world’s leading service provider of ETA 1-hour onsite hose replacement, according to the company. PIRTEK offers 24-hour, seven-day service that caters to almost every facet of industry. There are nearly 50 PIRTEK franchise service centers that function as home base to more than 200 PIRTEK mobile service vans operating in major metropolitan markets nationwide. Exclusive franchise territories are available. For more information, visit www.pirtekusa.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

John Anderson John Anderson Construction Warren, PA

“I KNOW THEY MAKE GOOD BUSINESS SENSE, AND I LIKE RUNNING THEM.” DoosanEquipment.com/John11

Doosan Delivers

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2014 Doosan Infracore Construction Equipment America. All rights reserved. | 114246

Au Authorized thorized Doosan Doos an De Dealers aler s

ALASKA ALASKA

R RGW GW Eq Equipment uipment S Sales ales

OKLAHOMA OKLAHOMA

VVenture enture D Drilling rilling S Supply upply

C Craig raig TTaylor aylor Eq Equipment uipment Co Company mpany

LLivermore ivermore

5512-869-2974 12-869-2974

w www.rgwequipment.com w w.rgwequipment.com

H & E EEquipment quipment S Services, ervices, In Inc. c. 4405-789-7368 05-789-7368

WA WASHINGTON SHINGTON

Tu Tulsa ls a

FFarmers armers Eq Equipment uipment Co Company mpany

FFairbanks airbanks

9925-606-2403 25-606-2403

9907-452-1192 07-452-1192

S Scott cott Eq Equipment uipment

w www.craigtaylorequipment.com w w.craigt aylorequipment.com

FFontana ontana

ARIZONA ARIZONA

9909-822-2200 09-822-2200 8800-316-0327 00-316-0327

D Ditch itch W Witch itch ooff A Arizona rizona

w www.scottequip.com w w.scot tequip.com

Phoenix Phoenix 6602-437-0351 02-437-0351 888888-316-3242 316-3242

Tucson Tucson 5520-579-0261 20-579-0261 w www.ditchwitchaz.com w w.ditchwitcha z.com

COLORADO COLORADO H & E EEquipment quipment S Services, ervices, In Inc. c. H Henderson ender son 303-289-2201 303-289-2201 www.he-equipment.com w w w.he-equipment.com

C CALIFORNIA ALIFORNIA Be Berchtold rchtold Eq Equipment uipment Co Company mpany Bakersfield Baker s field 6661-323-7817 61-323-7817

IDAHO IDAHO Ba Barry rr y R Rental, ental, In Inc. c. Twin Twin Falls Falls 2208-734-4147 08-734-4147 w www.barryrental.com w w.barr yrent al.com

O Oklahoma klahoma City Cit y

918-445-2666 918-445-2666 www.he-equipment.com w w w.he-equipment.com

OREGON OREGON Fee Feenaughty naughty M Machinery achinery Co. Co.,, In Inc. c.

www.venturedrillingsupply.com w w w.venturedrillingsupply.com

B Burlington urlington 3360-757-6084 60-757-6084 888888-855-4982 8 5 5 - 49 82 www.farmersequip.com w w w.farmer sequip.com

Portland Por tland

WYOMING WYOMING

5503 03 2282-2566 82-2566 800-875-2566 800-875-2566

Bo Bobcat bcat of of Ca Casper sper

www.feenaughty.com w w w.feenaught y.com

307-235-6685 307-235-6685

TEX TEXAS AS TTexas exas TTimberjack, imberjack, IInc. nc. Jasper Jasper 4409-384-4611 09-384-4611

S Santa anta M Maria aria

LLufkin ufkin

80 805-922-7905 5-922-7905

9936-634-3367 36-634-3367 8877-363-1143 77-363-1143

w www.berchtold.com w w.berchtold.com

Georgetown Georgetown

w www.texastimberjack.com w w.texastimberjack.com

C Casper asper w www.bobcatofcasper.com w w.bobcatofcasper.com

B Bobcat obcat ooff G Gillette illette Gillette Gillet te 3307-686-4890 07-686-4890 www.bobcatofgillette.com w w w.bobcatofgillet te.com

Page 24 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer:

Buford, GA Battle Creek, MI 678.318.9500 269.965.1269 Forest Park, GA Byron Center, MI Contact your local dealer: 770.319.0074 616.878.7450 Savannah, Kentwood, POWER MI ROMCO GA EQUIPMENT EQUIPMENT CO. 912.964.8079 616.698.2960 www.romco.com COMPANY Lansing, MI Asheville, NC www.power-equip.com 5151 Cash Road 517.272.5033 828.687.0620 Dallas, TX 75247 500 E. 62nd Ave. 214-819-4100 Muskegon, MI Denver, CO 80216 Charlotte, NC Fax: 214-819-4102 303-288-6801 231.798.8754 704.596.8283 Fax: 303-288-6809 Austin New Hudson, MI Greenville, NC Blvd. 1150 Old W. Settlers 2329 River Road 248.356.5200 Round Rock, TX 75681 Grand Junction, CO 81505 252.754.5280 512-388-2529 970-243-0722 Romulus, MI Raleigh, NC 877-851-1026 Fax: 970-243-0726 Fax: 512-388-1781 734.641.8238 919.661.8710 2940 E. Las Vegas St. Saginaw, MI CO Buffalo Bismarck, ND Colorado Springs, 7387 Hwy. 164 80906 989.752.9400 701.250.4882 Buffalo, TX 75831 719-392-1155 903-322-5602 Sterling Hts, MI Fax: 719-390-9604 Fargo, ND Fax: 903-322-5605 586.977.6000 701.271.2360 8806 E. US Hwy. 34 Carmine Johnstown, CO Traverse, MI 80534 Minot, NDHwy. 290 West 17391 US 970-669-6209 Carmine, TX 78932 231.943.3700 701.250.4882 Fax: 970-669-6280 979-278-3570 Wixom, MI Fax: 979-278-3573 Charleston, SC 248.449.6700 Dallas 843.414.1120 ARNOLD 3900 Halifax Wixom, MI SC Dallas, TX 75247 MACHINERY CO. Columbia, (Cons. Division) 214-819-4100 www.arnoldmachinery.com 803.791.0740 800-227-6626 248.356.5200 2975 West 2100 South Piedmont, SC Fax: 214-819-4102 Salt Lake City, Zeeland, MI UT 84119 864.704.1060 Ft. Worth 801-972-4000 616.748.4108 1350 N. E. Loop 820 Fax: 801-975-9434 Chattanooga, TN Ft. Worth, TX 76106 817-626-2288 3330 N. Yellowstone Hwy. 423.308.7940 866-966-4602 Idaho Falls, ID 83401 Knoxville, TN Fax: 817-626-8983 208-523-0822 Fax: 208-523-9918 865.525.1845 Houston 300 East Overland Rd. Meridian, ID 83642 208-887-6000 Fax: 208-887-6013

McALLISTER

EQUIPMENT CO. 464 Washington St. South Twin Falls, ID 83301 208-733-1715 Alsip, IL Fax: 208-734-6924

708.389.7700 1650 East Greg IL St. East Peoria, Sparks, NV 89431 309.694.4455 775-356-1511 Fax: 775-356-0517 Rockford, IL 4136 Donovan Way 815.227.0555 Las Vegas, NV 89030 Springfield, 702-642-9000 IL Fax: 702-642-8808 217.789.0351 4323 East Winslow Villa Park, IL Ave. Phoenix, AZ 85040 630.530.7600 602-414-1900 Fax: 602-414-1904 3350 East Gas Rd. Tucson, AZ 85714 520-294-7677 Fax: 520-294-7670

8450 Breen Dr. Houston, TX 77064 713-937-3005 800-865-6998 Fax: 713-937-7541 Longview 2116 E. Loop 281

Evansville, IN75605 Longview, TX 903-758-5576 812.867.6661 Fax: 903-758-3079 Fort Wayne, IN Rio Grande Valley 260.482.3681 312 Park St. Mercedes, TX 78570 Indianapolis, 956-565-0100 IN Fax: 956-565-1765 317.247.9125 Corbin, KY San Antonio 1042 S. E. Loop 410 606.528.9440 San Antonio, TX 78220 210-648-4600 Louisville, KY 800-966-4601 502.456.4050 Fax: 210-648-1282 Prestonsburg, KY ROL Remote Oilfield 606.874.2104 Location 3610 Interstate 37 St. Louis, MO Three Rivers, TX 78071 361-254-2317 314.487.8925

YOU CHOSE GUARANTEED* FUEL EFFICIENCY WITH EXCEPTIONAL DEALER SUPPORT.

Smart Works. * Ask about our Fuel Efficiency Guarantee by contacting a Volvo dealer near you, or visit volvoce.com/NAFuel to learn more.

Volvo Construction Equipment

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ December 13, 2014 â&#x20AC;¢ Page 25

ABILENE NEW HOLLAND, LTD. Abilene, TX

800/382-9271

www.anhltd.com

BANE MACHINERY INC. Dallas, TX Ft. Worth, TX

Tyler, TX DEALER

800/594-2263 800/601-2263

IMPRINT800/594-2200 AREA

www.banemachinery.com

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT Oklahoma City, OK

405/917-9191

Tulsa, OK

918/835-7200

www.oklahomaterritoryequipment.com

AN E.P.I.C. GENERATION

APCO EQUIPMENT North Las Vegas, NV

800/574-4089

EFFICIENT

www.apcoequipment.com

POWERFUL

TRI-WEST TRACTOR, INC. Livermore, CA

925/455-8200

www.tri-westtractor.com

INTELLIGENT RASMUSSEN EQUIPMENT CO. West Valley City, UT

800/453-8032

www.rasmussenequipment.com

)HYYL[[ 7HYR +YP]L Â&#x2039; :\P[L )HYYL[[ 7HY Kennesaw, Georgia 30144 eo www.kawasakiloaders.com kilo

> > > COMFORTABLE

CLM EQUIPMENT CO. INC. Broussard, LA

337/837-6693 F: 337/837-3146

Sulphur, LA

337/625-5942

Baton Rouge, LA

225/677-7838

Houston, TX

281/598-2500

www.clmequipment.com

Page 26 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Iconic Yaquina Head Lighthouse Receives Rare Scaffolding Restoration

WAUKESHA-PEARCE INDUSTRIES, INC. 12320 S. Main Houston, TX 77035 713-723-1050 Fax: 713-551-0798 Tomball, TX 281-351-9016

By Lori Tobias CEG CORRESPONDENT

Visitors to Oregon’s iconic Yaquina Head Lighthouse won’t get the view they might be expecting. Instead, they may be surprised to find the 93 ft. (28 m) tall tower shrouded in a wrap of white. For the second time in seven years, workers erected scaffolding around the lighthouse, the Oregon Coast’s tallest, then cloaked the scaffolding under a coat of plastic. Now, the crew from Pioneer Waterproofing will remove the waterproof paint applied in 2007 and replace it with more historically appropriate material. “The paint has failed and we’re getting a lot of rust issues,” said John Chaffin, Yaquina Head Lighthouse facility operations specialist. “We’re getting rid of the elastomeric waterproofing paint. It didn’t do want it was supposed to do. It retained water instead of keeping water out.” But at least this time around, the work is a bit easier for the crews. Seven years ago, when workers set about to restore the lighthouse, they were working to remove lead-based paint and to restore the old metal work. “The containment then was bullet proof,” Chaffin said. “Nothing got out into the environment. It was ventilated and vacuumed so every particulate was captured. This time For the second time in seven years, workers erected scaffolding around the Yaquina Head Lighthouse. we’re not dealing with lead.” That’s not to say the work is not without its challenges. The lighthouse sits atop the basalt headlands in Newport on Oregon’s central coast, exposed to the blasting winds and pounding wind typical this time of year. “It’s hard to keep that plastic on the outside,” said Mike Crawford of Pioneer Waterproofing. “It’s supposed to be good to 70 mph, but that is not always a perfect number. We’ve had portions torn a couple of times. So we’ve had to keep that maintained. The light is off. We put protection up over the windows.” Work on the lighthouse began in 1871 and it was first lit in August 1873. The original Fresnel lens remains in the tower, automated now to flash its beacon at two seconds on, two seconds off, two seconds on and 14 seconds off. The signal is distinct to the Yaquina lighthouse. Once the old paint is removed, workers will replace The crew from Pioneer Waterproofing it with a natural cement wash. will remove the waterproof paint “It’s historic cement,” applied in 2007 and replace it with Crawford said. “It’s not real more historically appropriate material. thick and then we have another subcontractor who is doing the Work on the lighthouse began in 1871 finished in January, when the light will again painting of metal and wood and and it was first lit in August 1873. flash its signal and the spruced up tower will he is also putting a mineral The original Fresnel lens remains in once again be unveiled. coating on top of that which is the tower, automated now to flash its (This story also can be found on beacon at two seconds on, two secmore historically accurate.” Construction Equipment Guide’s Web site at onds off, two seconds on and 14 secThe work is expected to be www.constructionequipmentguide.com.) CEG onds off.

Kilgore, TX 903-984-2011 Port Arthur, TX 409-721-5305 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 San Antonio, TX 210-648-4444 Pflugerville, TX 512-251-0013 Buffalo, TX 903-322-7150 www.wpi.com

KOMATSU EQUIPMENT COMPANY 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557 3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334 6253 West Gilbert Industrial Court Hurricane, UT 84737 435-986-1000 10790 South Highway 59 Gillette, WY 82718 307-682-1445 405 Jonah Drive Rock Springs, WY 82901 307-686-1300

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 27

KIRBY-SMITH MACHINERY INC. 6715 W Reno Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065 Abilene, TX 877-577-5729 325-692-6334

ARTICULATED TRUCKS From Komatsu – The Truck Experts

Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000 www.kirby-smith.com

POWER MOTIVE CORPORATION DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 888-271-3308 Colorado Springs, CO 888-271-3308 Grand Junction, CO 888-271-3308

The redesigned Tier 4 Interim Articulated Trucks will boost your productivity and lower your costs. From increased payload to improved traction control, the truck experts at Komatsu once again deliver on your need for a lower cost per ton moved. t Komatsu Traction Control System (K-TCS) automatically increases performance in soft ground conditions.

Milliken, CO 888-271-3308

t New operator’s cab provides better visibility and ergonomics.

Durango, CO 888-271-3308

t Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

t Efficient Tier 4 Interim engine provides up to an 8% reduction in fuel consumption.

Cheyenne, WY 888-271-3308 www.powermotivecorp.com

www www.komatsuamerica.com .komatsuamerica.com

Page 28 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Liebherr Construction Opens Western U.S. Spare Parts Depot

The new logistics center for Liebherr earthmoving machines in Oberopfingen.

Liebherr shapes its global, local and regional spare parts distribution and logistics to support its rapid growth and exceed customer-service expectations around the world. Several positive developments that have a strong impact in the fulfilment and distribution of earthmoving Liebherr spare parts globally and within the United States have been announced in the last months by the Liebherr Group. In October of this year, the Liebherr Group gave a glimpse into the progress of its new spare parts and logistics center in Kirchdorf, Germany. The new facility to begin operations in early 2015, is expected to serve as its global logistics hub for earthmoving spare parts. The investment value for the first stage of construction is in excess of $143 million and covers an area in excess of 505,000 sq. ft. A large part of the investment has gone into implementing highly automated warehouse equipment and software that will enable the logistics center to employ leading-edge performance standards. The new warehouse solutions will allow the group to handle higher volumes of spare parts, reduce turn-around times and guarantee order accuracy for Liebherr customers around the world. Additionally, the Liebherr Group is continuing a significant investment in building improvements, machinery, tools and infrastructure to expand the factory and enhance the warehouse facility at

its Newport News, Va., location. These renovations are part of the $45.4 million investment as announced earlier this year by Liebherr Mining Equipment Newport News Co. The Newport News location serves as the headquarters and central warehouse for the Liebherr Mining Division and for four other operating Liebherr companies; Liebherr Construction Equipment Company among one them. Major warehouse overhauls

include; the implementation of a sophisticated warehouse management system (WMS) and wide range of process-improvement initiatives consisting of a new racking system adding additional locations and increased load-bearing capability, more than 100,000 sq. ft. of new epoxy floor to facilitate the heavy traffic and movement of material, and eight new additional loading docks to speed up the traffic and help with the flow of trucks

Preliminary commissioning zone for automatic shelving system at the new Liebherr logistics center in Oberopfingen.

loading and unloading materials at the facility. “The new WMS offers a multitude of functions that will optimize the overall logistics and support the daily operations of the facility. It will provide a transparent work flow and enhance the visibility of the activities at each of the warehouse terminals; from receiving thru shipping, in addition to providing inventory accuracy,” said Martin Seitz, WMS project coordi-

Manual warehouse area and automatic dispatch at the new Liebherr logistics center in Oberopfingen.

nator at Liebherr Mining Equipment Co. Liebherr Construction Equipment Co. also announced the opening of a new spare parts facility located in Visalia, Calif. The new depot is expected to begin operations in early 2015. The facility will support western U.S. distribution with localized parts warehousing. The National Parts Distribution Center in Newport News, Va., along with its new distribution center in California, will help expedite parts orders, improve operational efficiency and minimize transit time while increasing customer support. “The opening of the new spare parts and logistics center in Germany along with the expansion and overhaul of our Newport News operations, and the opening of the parts depot in the western United States, is part of Liebherr’s ongoing commitment to better serve our customers not just throughout the world but also throughout the United States. This represents a significant step forward in our customer support,” said Peter Mayr, president of Liebherr Construction Equipment Co. “We continue to invest in our operations to ensure we provide our dealer network and customers with the exceptional support they expect from Liebherr.” For more information, visit www.liebherr.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 29

Portable Power WE DO MORE THAN DESIGN EQUIPMENT.

WE POWER YOUR SUCCESS. Whether you are looking for products with the latest technology or you want to have your old machine remanufactured, Doosan Portable Power can help you acheive success. Focused on customer satisfaction and product solutions, our dealer network is the largest nationwide network in the industry. Contact your

local dealer today. Air Compressor Solutions, Inc.

Volvo Construction Equipment & Services

Pape Material Handling Inc. / Bobcat West

TEXAS

CALIFORNIA

Odessa (432) 335-5900

Bakersfield (661) 387-6090 Fresno (559) 834-4420 San Leandro (510) 357-9131 Sacramento (916) 388-2244 San Diego/Lakeside (619) 441-3690 Corona (951) 277-7620

www.papemh.com www.bobcatwest.com

Ditch Witch of Arizona ARIZONA Phoenix (602) 437-0351

Ditch Witch of Southern Arizona ARIZONA Tucson (520) 579-0261

Blueline Construction Equipment & Services www.bcespower.com

TEXAS Arlington (817) 633-1010 Houston (713) 681-9221

LOUISIANA West Monroe (318) 699-0610

Find Us on

800.633.5206

OREGON Portland (503) 639-8910 Portland (503) 286-6400 Eugene (541) 689-7407 Medford (541) 779-3444

NEVADA Sparks (775) 356-9333

WASHINGTON Seattle (206) 722-5800 Arlington (360) 474-8461 Fife (253) 926-4386 Bellingham (360) 756-6572 Yakima (509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934 Spokane (509) 536-7300

DoosanPortablePower.com

Page 30 â&#x20AC;˘ December 13, 2014 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ December 13, 2014 â&#x20AC;˘ Page 31

Link-BeltÂŽ Spin AceÂŽ Excavators are packed with all the power, productivity, DQG IXHO HIÂżFLHQF\ \RXÂśYH FRPH WR H[SHFW IURP XV DORQJ ZLWK D PLQLPXP VZLQJ UDGLXV GHVLJQ IRU EHWWHU PDQHXYHUDELOLW\ DW VLWHV ZKHUH ZRUN VSDFH LV DW D SUHPLXP 7KRXJKWIXO UHGHVLJQ RI FRXQWHUZHLJKWV DQG ERRP SODFHPHQW PDNHV WKHP LGHDO IRU UHVLGHQWLDO FRQVWUXFWLRQ XWLOLW\ ZRUN DQG VSHFLDOW\ WUHQFKLQJ MREV Â&#x2021; 5RRP\ UHGHVLJQHG FDE Â&#x2021; +LJK GHÂżQLWLRQ IXOO FRORU Ć&#x17D; /(' PRQLWRU Â&#x2021; &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG Ă&#x20AC;XLG FKHFNV Â&#x2021; Extended service intervals Â&#x2021; )RXU PRGHOV Ć? Ć&#x17D; WR Ć? Ć&#x17D; WDLO VZLQJV Â&#x2021; 7LHU $ FHUWLÂżHG ,VX]X HQJLQHV Â&#x2021; \HDU VXEVFULSWLRQ WR 5HPRWH&$5(Â&#x152; WHOHPDWLFV $OO WKLV ZLWK WKH LQGXVWU\ÂśV EHVW VWDQGDUG ZDUUDQW\ <RXU /LQN %HOW ([FDYDWRU GHDOHU KDV WKH ULJKW 6SLQ $FH IRU \RXU DSSOLFDWLRQ DORQJ ZLWK XQFRPSURPLVLQJ VHUYLFH DQG VXSSRUW WR NHHS WKHP SHUIRUPLQJ DW WKHLU EHVW

Model #

Operating Weight

Net hp @ rpm

Tail Swing

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

*75 X3 and 80 X3 engines are Final Tier 4

Page 30 â&#x20AC;˘ December 13, 2014 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ December 13, 2014 â&#x20AC;˘ Page 31

Model #

Operating Weight

Net hp @ rpm

Tail Swing

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

; 6SLQ $FH

OEV

KS # USP

Ć? Ć&#x17D;

*75 X3 and 80 X3 engines are Final Tier 4

Page 32 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

River to Divide Into Habitat, White Water, Safe Channel DAM from page 1

While the dam is not being removed, workers will “punch some holes in it,” said Evan Stuart, Hamilton project manager. “The dam remains functional and will preserve water levels for multiple users,” he said. “It eliminates a navigation and fish passage obstruction while maintaining water rights of upstream users.” The project includes dividing the river into three channels. On the right will be the habitat channel at 80-ft. (24.4 m) wide. The center channel will be the white water channel, and also 80-ft. wide, and on the left, at 20-ft. (6 m) wide, will be the safe passage channel and also for fish passage. “Also in the safe passage channel, we will use inflatable panels — raised and lowered by pneumatics — that will control the flow,” Schnieder said. “The panels — or bladders — are inflated with air and you use them to sculpt the way the water flows downstream. They will help us change how the water functions. It can be novice level one day, and then changed the next day to be a black diamond level.” The white water features are also adjustable, said Stuart. “In the case of an emergency, water can be mostly diverted from one channel to another by means of remotely adjustable gates.” In addition to the roughly 20 large bladders, there will be three fixed wave features. It’s a first in Oregon, though Stuart noted that River Restoration, the company building the white water

course, has built a number of them in Colorado. “But it’s quite a different exercise here in Oregon where the environmental regulations are more stringent,” he said. The river work will begin with the white water and safe passage channel. Water from those channels will be redirected to what will eventually become the habitat channel. Once the first two channels are complete, the work on the habitat channel will begin. The habitat channel will also include multiple water cascades and shallow bedding areas and back water areas for fish and other aquatic animals. “It is actually an expansion of habitat,” Stuart said. “This will make the passage possible for fish and other aquatic animals — it includes the creation of some quiet pools that are at the bases of small waterfalls that will improve the aeration of the water.” Crews also will replace the pedestrian/bike bridge. The existing bridge is an old road bridge that had been repurposed for pedestrian and cyclist use. It’s low to the water and presents a safety issue for paddlers. The new bridge will be raised and placed in a different location. It will feature a small bump out to allow people to hang out and watch the white water activity. There also will be booms — or floating fences — directing white water paddlers one way and floaters the other. The project is scheduled to be completed see DAM page 54

There are four other dams on the Deschutes, but the Colorado Dam is the most dangerous and so it became the top priority.

“It is actually an expansion of habitat. This will make the passage possible for fish and other aquatic animals — it includes the creation of some quiet pools that are at the bases of small waterfalls that will improve the aeration of the water.” The existing bridge is an old road bridge that had been repurposed for pedestrian and cyclist use. It’s low to the water and presents a safety issue for paddlers. The new bridge will be raised and placed in a different location.

Evan Stuart Hamilton Construction Company

SECTION

Trucks & Trailers Pages 33-35

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Felling Trailers Celebrates 40 Years With Weekend of Events

elling Trailers recently hosted two events at its Sauk Centre, Minn., location.

To celebrate its 40th anniversary, a community open house with lunch was held on Oct. 24. On Oct. 25, the Statewide Tour of Manufacturing and an employee/family open house were held. “We were thrilled to have so many people come through our doors and observe what modern manufacturing looks like,” said Brenda M. Jennissen, Felling Trailers public relations and finance director. “Manufacturing jobs are in high demand and we were able to show attendees why. It was also really fun to see so many Felling Trailers team members bring and show their immediate and extended families their workplace.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) see FELLING page 35

Operations Vice President Paul Radjenovich gives FT team member Alonzo Kpadeh and his family a tour, including a stop at the laser table.

These model trailers were built approximately 20 years ago for displays, parades, etc. Midwest Machinery loaned Felling the Gator and lawn mower for the anniversary celebration.

Families of full time employees are given a tour of the facility.

Felling Trailers team member Brad Meyer shows his grandson Tyler and great nephew Dominic (back R) his workplace.

Felling Trailers’ founder Merle J. Felling built this trailer on the family farm when he was 10 years old. Team members refurbished it for the company’s 30th anniversary, 10 years ago.

Weekend Shift Supervisor Warren Johnson and Plant Manager Jack Ellingson explain manufacturing to tour participants.

Page 34 • December 13, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • December 13, 2014 • Page 35

Felling Trailers Employees, Families Enjoy Open House FELLING from page 33

A Felling Trailers’ team member’s son gets his face painted.

A Statewide Tour of Manufacturing group got a facility tour.

Family members participate in a game.

Team members and families paint pumpkins and enjoy snacks and beverages.

A Strong Complement...

Talbert Acquires Ferree Talbert Manufacturing, a manufacturer of custom heavy-haul trailers based in Rensselaer, Ind., has acquired Ferree Trailers, located in Liberty, N.C. The acquisition adds additional scope to Talbert, while also providing products that will take the company into new market segments. “Ferree is a strong complement to the Talbert line,” said Andy Tanner, Talbert president. “Like Talbert, Ferree is known for high-quality trailers and a strong commitment to the customer. The acquisition of Ferree Trailers provides us with a wider product offering to serve our customer needs and a large, state-of-the-art manufacturing facility with quality people that offers tremendous opportunity.” The Ferree line includes detachable, fixed and folding gooseneck trailers and tag-alongs as well as specialty trailers such as logging, pole and crane boom trailers. These specialty trailers provide designs and market opportunities that weren’t previously part of the Talbert line. Ferree’s 60,000-sq.-ft., ultramodern manufacturing facility in Liberty, N.C., provides opportunity for expanded manufacturing capabilities and a distribution center on the

East Coast. “A significant number of Talbert trailers are sold up and down the East Coast,” said Greg Smith, vice president of sales and marketing. “This new facility in North Carolina not only gives us the ability to increase production and reduce lead times, but also provides us a distribution point to access customers with reduced freight costs and delivery times. In the trailer industry, that is huge.” Since Austin Talbert first invented the hydraulic removable gooseneck to reduce injuries and fatalities in the heavy haul industry, Talbert has been a leader in safety and innovation. Smith said the Ferree acquisition is another example of Talbert’s ongoing commitment to the heavy haul and specialty trailer market and will only serve to strengthen the brand and offer a broader line of solutions to the existing customer segment. For more information, call 800/348-5232 or visit www.talbertmfg.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 36 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Case Welcomes Dave Garton, Wayne Harriman to Strategic Accounts Team Case Construction Equipment has added Dave Garton and Wayne Harriman to its strategic accounts team, both in the role of manager — rental accounts. Garton and Harriman will call on accounts throughout North America to ensure customer satisfaction and further develop the Case equipment rental network. Garton will be based out of Davenport, Iowa, and Harriman will work from Bettendorf, Iowa. “Forecasts for the equipment rental market continue to show growth,” said Pat Hunt, director of strategic accounts, Case Construction Equipment. “We’re investing in additional experienced people to present rental customers with equipment and support solutions tailored to their unique market needs. Both Dave and Wayne have a depth of knowledge that will be a major asset to bringing together our dealer network and equipment rental operations throughout the U.S.” For more information, visit CaseCE.com. Dave Garton

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Wayne Harriman

Midco Unveils New Hammer Line Midco Demolition Tool Company announced on Dec. 4 in Dallas, Texas, the continuation of the unveiling of its new hydraulic hammer line with two new models, the 3,500 lb. (1,588 kg) MD21 and the 6,000 lb. (2,722 kg) MD32. “We are expanding our MD Series to insure that there is a quality hydraulic hammer for all work application utilizing the new Midco innovative design,” said Midco General Manager David Spainhour. Both of these new models are equipped with the Midco designed self-lubrication system. This innovative system insures that these two new models are operator friendly and will stand up to the extreme wear and tear that hydraulic hammers experience everyday. “With our 28 years of experience in the repair and rebuild of nearly every make and model of competitive hydraulic hammers, we knew where our hammers needed to be ‘beefed-up’ in order to outperform and outlast the competition. One of these areas is the amount of seals we install at the factory,” said Spainhour. “The installation of these

extra seals basically eliminates leaks, one of the most common and worst wear areas for hydraulic pistons.” he added. The Midco demolition tool MD Series line now offers hydraulic hammers ranging from the 500 to 6,000 lb. (226 to 2,722 kg). The new models include the 500 lb. MD4, the 750 lb. (340 kg) MD 6, the 1,500 lb. (680 kg) MD9, the 3,500 lb. MD21, and the 6,000 lb. MD32. All hammers above 500 lbs. are self-lubricating. According to Spainhour, parts and or service are readily available at the company’s Dallas repair center. Midco Demolition Tool Co. has been a leader in the hydraulic hammer business for more than 28 years. Its 20,000 sq. ft. service center in Dallas, Texas, repairs and rebuilds all brands of hammers. The company has the world’s largest inventory of parts which include unsupported models by all major manufacturers, according to the company. For more information call 972/685-6940 or toll free at 1800/467-2605. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

COLORADO

TEXAS

WAGNER EQUIPMENT CO. www.wagnerequipment.com Aurora 303-739-3000 Denver 303-433-2727 (Rental) Carbondale 970-963-7368 (Rental) Commerce City 303-286-2300 (Rental) Colorado Springs 719-390-7316 (Rental) 719-635-1669 Granby 970-328-2080 (Rental) Gypsum 970-328-2080 (Rental) Hayden 970-276-3781 Silverthorne 970-262-3788 (Rental) Fort Collins 970-493-5005 (Rental) Grand Junction 970-245-6546 (Rental) 970-242-2834 Pueblo 719-544-0088 (Rental) 719-544-4433 Steamboat Springs 970-871-1990 (Rental) Windsor 970-278-1750 (Rental) Burlington 719-346-7880 (Rental) (719) 346-5132 Durango 970-259-2001 (Rental) 970-259-2001 Windsor 970-278-1750

ANDERSON MACHINERY CO. www.andersonmachinerytexas.com Corpus Christi • 361-289-6043 Manor • 512-272-8133 Pharr • 956-781-5995 San Antonio • 210-661-2366 Victoria • 361-575-8111

NEW MEXICO WAGNER EQUIPMENT CO. www.wagnerequipment.com Flora Vista 505-334-5522 (Rental) La Cruces 575-647-9700 Albuquerque 505-938-2000 (Rental) 505-345-8411 Hobbs 575-393-2148 (Rental) 575-393-3665 Clovis 505-235-3294 (Rental) Farmington 505-327-5331

OKLAHOMA OCT EQUIPMENT www.octequipment.com Clinton • 580-323-3422 Oklahoma City • 405-789-6812 Tulsa • 918-437-5085

HOLT CAT www.holtcat.com Dallas • 214-342-6700 Ft. Worth • 817-847-8880 Irving • 214-342-6700 Waco • 254-662-7377 GEORGE P. BANE, INC. www.banemachinery.com Tyler • 903-597-6641 YELLOWHOUSE MACHINERY CO. www.yellowhouse.us Abilene • 325-677-2291 Amarillo • 806-335-1681 Lubbock • 806-763-0473 Odessa • 432-580-3337 San Angelo • 325-651-3337 Wichita Falls • 940-322-3337 MUSTANG CAT www.mustangcat.com Houston • 713-460-2000 Beaumont • 409-892-8412 Bryan • 979-775-7368 Bryan • 979-775-0639 Channelview • 281-452-7368 Conroe • 936-756-1110 El Campo • 979-543-3389 Freeport • 979-233-7368 Houston • 713-462-9993 Houston • 713-228-7368 LaMarque • 409-935-7000 Lufkin • 936-639-5551 Lufkin • 936-632-6775 Nederland • 409-722-7368 WAGNER EQUIPMENT CO. www.wagnerequipment.com El Paso 915-493-5005 (Rental) 915-821-7651

WASHINGTON N C MACHINERY 800-562-4735 Seattle • 425-251-5800 Chehalis • 360-748-8845 Fife • 253-896-0878 Monroe • 360-805-6000 Mt. Vernon • 360-424-4292 Wenatchee • 509-886-5561 Yakima • 509-248-2371

WYOMING TRACTOR AND EQUIPMENT Worland • 307-347-4747

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 37

ALASKA NC MACHINERY www.ncmachinery.com 800-478-7000 Anchorage, AK • 907-786-7500 Dutch Harbor, AK • 907-581-1367 Fairbanks, AK • 907-452-7251 Juneau, AK • 907-789-0181 Prudhoe Bay, AK • 907-659-6900 Wasilla, AK • 907-352-3400

CALIFORNIA HAWTHORNE CAT www.hawthornecat.com San Diego • 800-437-4228 Lakeside/San Marcos/Chula Vista (Rental) 800-750-4228 HOLT OF CALIFORNIA www.holtca.com Pleasant Grove • 916-921-8969 QUINN CAT www.quinncompany.com 10006 Rose Hills Road City of Industry, CA 90601 888-842-2155 • Fax: 562-692-1843 Bakersfield Corcoran Firebaugh Foothill Ranch Fresno Lancaster Los Angeles Oxnard Salinas Santa Maria Sylmar

HAWAII HAWTHORNE CAT www.pacific.hawthornecat.com Hilo • 808-961-3437 Kauai • 808-245-4058 Kona • 808-329-4521 Oahu • 808-677-9111 Oahu • 808-676-0227 (Rental) Maui 808-877-6538

MONTANA TRACTOR AND EQUIPMENT Billings, MT • 406-656-0202 Billings-Sgt. • 406-245-4426 Bozeman • 406-585-5800 Great Falls • 406-761-7900 Helena • 406-442-2990

NEVADA CASHMAN EQUIPMENT www.cashmanequipment.com 3300 St. Rose Parkway Henderson, NV 89052 702-649-8777 Fax: 702-633-4699 Elko • 775-738-9871 Reno/Sparks • 775-358-5111

NORTH DAKOTA TRACTOR AND EQUIPMENT Williston • 701-572-8377

Page 38 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 39

The more things change, the more they stay the same.

the best bulldozer on the market? Contact your local

SSTTA A redefined what was possible For over 70 years, DRESST

dealer today to see what a DRESSTTA bulldozer can do fo or

with a bulldozer. Today, the bar continues to be set with

you. No dealer in your area? Call 1 (844) 4) DRESST TA A fo or

or the M Series and R Series bulldozers. Are you looking fo

support.

Dearler 1 Houston, TX p. (555) 555 -- 5555 5555 www.dealersite.com

Mega Machinery Dealer 2 Dealer 3 Co. Dealer 4 12215 Highway 67 • Lakeside, CA 92040 San Antonio, TX Austin, TX Dallas , TX • 619-561-7832 p. (555) 555 - 5555 1-855-872-3497 p. (555) 555 p. (555) 555 - 5555 - 5555 Fax: 619-561-9507 www.dealersite.com www.dealersite.com www.dealersite.com www.megamachinery.com

LEGENDARY PRODUCTIVIT Y

POWER

PERFORMANCE

www.dresstanorthamerica.com

Page 40 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BANE MACHINERY, INC. 2449 Manana Rd. Dallas, TX 75220 214/352-2468 Fax: 214/353-2460 Tyler, TX 903-597-6641 Ft. Worth, TX 817/847-5894

BEE EQUIPMENT SALES LTD. 2506 E. Slaton Rd. Lubbock, TX 79404 806/745-1511 Fax: 806/455-0593

C. L. BOYD CO., INC. 4220 West Reno Ave. Oklahoma City, OK 73107 800/OKC-BOYD 405/942-8000 Fax: 405/945-8569

4 RIVERS EQUIPMENT Colorado Springs, CO 1100 E. Cheyenne Rd. 719/475-1100 www.4riversequipment.com

Ardmore, OK 866/720-2693 580/224-2693

Albuquerque, NM 505/884-2900

Lawton, OK 800/633-2693 580/355-6667

El Paso, TX 915/598-1133 Farmington, NM 505/326-1101 Fort Collins, CO 970/482-7154 Frederick, CO 303/833-5900 Hobbs, NM 575/392-6923 Pueblo West, CO 719/547-3505

SCOTT EQUIPMENT 14635 Valley Blvd. Fontana, CA 92335 800/316-0327 909/822-4850 www.scottequip.com

Pages 41-49

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Cat 826K Landfill Compactor Features Safety, Convenience The Cat 826 landfill compactor has set the design standard for this demanding application since 1978, and with the introduction of the K Series model, that design is further advanced in terms of operator comfort and safety, ease of operation, durability, reliability, low-cost operation, and productivity. Two Cat C15 ACERT engine options are available, meeting U.S. EPA Tier IV Final/EU Stage IV emission standards or U.S. EPA Tier III/EU Stage IIIA equivalent emission standards. It delivers 405 net horsepower (302 kW) to the 826K’s drive train, which uses a 2F/2R planetary power-shift transmission, lock-up torque converter, and heavy-duty planetary axles that can accommodate three new wheel-and-tip configurations. With an operating weight of 90,207 lbs. (40,917 kg), coupled with massive structures that remain solid through a number of rebuilds, the 826K is built for rugged durability, according to the manufacturer. For fuel-saving performance, the 826K features an Eco mode, which, when selected by the operator, limits engine speed and allows the machine to function in an auto-shift mode when maximum torque is not required. For operator convenience, the left pedal serves as a brake, transmission neutralizer and engine decelerator, which the operator can use to temporarily override the engine speed set with the throttle lock for safely maneuvering around obstacles. And for optimum responsiveness and control, the 826K’s STIC system allows single-lever steering and transmission control. Operator comfort and convenience is further accommodated in the design of the 826K with easier entrance and exit from the cab with lighted, shallow-angle stairways

and a STIC armrest that folds away. The Cat comfort series airsuspension seat features extra thick cushions and moves the attached electro-hydraulic STIC-control pod and implement-control pod when adjusted. The cab, isolationmounted to the frame, is pressurized with filtered air, and the selected temperature is maintained automatically. The control panel uses large, back-lit switches with LED indicators, and a simple twoposition rocker switch controls the parking brake. Drive Train/ Structures/Guarding The 826K delivers consistent, smooth shifting via integrated electronic controls that use the Caterpillar single clutch speed shifting system. The metallurgy and heat-treating incorporated into the transmission's gearing ensure consistent performance and long-term durability. The lock-up torque converter used in the 826K has several benefits, including more efficient transmission of power, lower system heat, increased travel speed and fuel efficiency. Further fuel savings are achieved with the C15’s engine idle shutdown system, and engine durability is enhanced with delayed engine shutdown. Because the landfill compactor works in the harshest of applications, Caterpillar has designed the machine with purpose-built structures that deliver long-term durability. The full-box-section rear frame resists twisting forces and shock, the steering-cylinder mounts are designed to effectively dissipate steering loads into the frame, and the axle mounts are heavy-duty components that contribute to the overall structural integrity of the machine. Specialized guarding protects

With an operating weight of 90,207 lbs. (40,917 kg), coupled with massive structures that remain solid through a number of rebuilds, the 826K is built for rugged durability, according to the manufacturer.

the 826K’s systems and components from jobsite hazards, such as debris build-up, chemicals, and wire and plastics that might wrap around wheel assemblies. Hydraulically actuated engine and power-train guards shield components and resist debris build up; front-frame guards further prevent trash build-up in the frames and add protection for hydraulic lines; axle-wrapping and seal guards reduce the prospect of material binding around the axles; a fine-mesh air-inlet screed prevents material from entering the engine compartment; an underhood ventilation system resists trash intrusion cools components; and striker bars and cleaner fingers help keep the wheels clean for optimum compaction effort. Wheels and Tips The 826K is available with three new wheel-and-tip configurations to improve machine performance and to meet individual landfill

applications. The paddle tip configuration is designed for greater traction with less weight, providing high performance coupled with reduced fuel burn. The plus tip is a conventional design that increases side-slope stability, and the combination tip provides a practical compromise of important elements — performance, fuel economy, and side-slope stability. Serviceability/Technology To promote the safety of personnel servicing the 826, routine maintenance points are grouped and accessible from ground level or from non-skid walkways with hand rails. Swing-out doors on both sides of the engine compartment provide easy access to daily service checks, and ecology drains simplify service and help prevent spills. An available swing-out stairway facilitates access to the engine. In addition, swing-out coolers for fuel and hydraulic fluid simplify cleaning, and a ground-

level power service center has an electrical-disconnect, emergencyengine-shutdown, and stairwaylight switches. To further complement serviceability, the Cat vital information system (VIMS 3G) integrated into the 826’s design keeps operators informed about machine operating conditions via an easy-to-view graphic display that features touchscreen interface. To expand machine-monitoring capability, the Cat Product Link system provides event and diagnostic codes, as well as data such as operating hours, fuel level, and idle time. This information is transmitted to a secure web-based application, VisionLink, which provides powerful tools for conveying information to machine owners and dealers, including working time versus idle time and mapping functions. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 42 • December 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CRUSHING PLANTS

We Call It EXPERTISE. You Call It PEACE OF MIND.

SCREENING Plants

IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers. For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.

Closed-circuit PLANTS

Crush. Classify. Profit.

w w w. i r o c k c r u s h e r s . c o m

Fecon Announces RTF230 Rubber Tire Mulching Tractor Fecon Inc. announced the release of the RTF230 rubber tire mulching tractor, a 4-wheel drive, 4wheel steer machine that lends itself to incredible tractive and handling capabilities. A center mounted engine and hydraulic drive train give the RT230 a very low center of gravity and even balance. Climbing slopes is no chore for the 230 hp engine and 75 gpm/6000 psi hi flow to the Bull Hog mulcher head or other hydraulic or PTO attachments. Unlike other wheeled tractors in the same horsepower class, the RTF230 also is capable of 24 mph road speeds, according to the manufacturer. A large cab with enhanced visibility in all directions provides the operator that extra measure of accuracy and safety on the job or on the road. RTF230 tractors can be configured for many types of work: land clearing, municipal maintenance, snow removal and roadside clearing as well as construction, industrial and agricultural applications. The RTF230 is capable of boom and/or crane mounting, mechanical or hydraulic PTO’s (and 3 point hitches) both front and back. With the BH120 variable speed Bull Hog forestry mulcher the RTF230 is agile, productive and easy to drive or haul to the job site. For more information, call 800/528-3113 or visit www.fecon.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

A center mounted engine and hydraulic drive train give the RT230 a very low center of gravity and even balance.

Construction Equipment Guide â&#x20AC;˘ Recycling Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ December 13, 2014 â&#x20AC;˘ Page 43

Meet any screening challenge.

LokotrackÂŽ mobile screens Whatever your application, there is a LokotrackÂŽ ST Series mobile screen that can handle it. Metso offers the widest selection of high capacity, dependable screens to meet any challenge, from aggregates processing to demolition and recycling. t t t t t t

&YDFMMFOU TDSFFOJOH DBQBDJUZ *OUFMMJHFOU QSPDFTT DPOUSPM GPS TBGF FBTZ PQFSBUJPO &BTZ UP NPWF RVJDL TFU VQ 'MFYJCJMJUZ XJUI B XJEF WBSJFUZ PG TDSFFO NFEJB &DPOPNJDBM GVFM FGGJDJFOU QSPEVDUJWJUZ 'VMM DPNQBUJCJMJUZ XJUI -PLPUSBDL -5 DSVTIFST

Contact your local Metso distributor today. www.metso.com/lokotrack

Lokotrack ST2.8 mobile scalping screen

5-year/10,000 hr Extended Protection Plan + 0% Financing Available!!

Lokotrack ST3.5

Lokotrack ST2.4

COMPASS EQUIPMENT 4688 Pacific Heights Rd. Oroville, CA 95695 530-533-7284 530-533-8610 Fax: 530-533-7657 www.compassequip.com

CRISP INDUSTRIES, INC. 323 Energy Way Bridgeport, TX 76426 940-683-4070 800-315-0871 Fax: 940-683-2181 South Texas 78155 830-625-6822 Sequin, Texas 78155 830-372-1110

Lokotrack ST4.8

Offer good through December 31, 2014. Additional terms and conditions may apply.

MODERN MACHINERY www.modernmachinery.com 4428 E Trent Ave. Spokane, WA 99212 800-541-0754 509-535-1654 Fax: 509-534-6741

4610 Cloudburst Way Eugene, OR 97402 800-826-9811 541-688-7321 Fax: 541-688-2241

22431 83rd Ave S Kent, WA 98032 800-669-2425 253-872-3500 Fax: 253-872-3519

1257 West Amity Boise, ID 83705 800-221-5211 208-336-8570 Fax: 208-336-8616

19444 Ivan Street SW Rochester, WA 98579 800-304-4421 360-273-4284 Fax: 360-273-4290

2735C Tucker Court Jerome, ID 83338 800-221-5211 208-324-4522 Fax: 208-324-8034

5241 N.E. 82nd Ave Portland, OR 97220 800-950-7779 971-222-1710 Fax: 503-255-1553

2666 Garrett Way Pocatello, ID 83201 800-829-4450 208-233-5345 Fax: 208-235-9658

CUTTING EDGE SUPPLY 234 East O Street Colton, CA 92324 800-949-9014 Fax: 909-825-4569 Phoenix, AZ 800-729-1473 N. Las Vegas, NV 702-649-1303

Page 44 • December 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Bandit Industries Offers New Model 2600, 2700 Towable Stump Grinders

www.petersoncat.com Northern California 888-738-3776 Oregon/Southern Washington 800-452-7676 Chico, CA Redding, CA Fortuna, CA Willows, CA Willits, CA Santa Rosa, CA San Martin, CA San Leandro, CA Eugene, OR North Bend, OR Klamath Falls, OR Redmond, OR Medford, OR Albany, OR Portland, OR Salem, OR The Dalles, OR Longview, WA

With hydrostatic direct-drive there are no belts, jackshafts, bearings or associated parts to maintain, making the operation and maintenance of these machines extremely simple.

For stump grinding professionals who prefer the simplicity of towable stump grinders but are tired of constant belt adjustments and maintenance, Bandit Industries presents the Model 2600 and Model 2700 towable stump grinders. These machines combine aggressive horsepower in compact, lightweight designs that makes stump grinding as easy as driving to the job site. Available with numerous options and reliable, beltless hydrostatic drive, the Model 2600 and Model 2700 each are exceptional performers for rental companies, municipalities and stump grinding professionals, according to the manufacturer. “The Model 2600 and Model 2700 towable stump grinders are very easy to tow, and their simplicity is still very popular with many of our customers,” said Christopher Smith, marketing and communications director of Bandit Industries. “The wide swing arc and adjustable tongues really help these machines to grind even large stumps without needing to reposition the whole unit. And the hydrostatic drive is definitely a big plus when it comes to lowering maintenance costs." With hydrostatic direct-drive there are no belts, jackshafts, bearings or associated parts to maintain, making the operation and maintenance of these

The Model 2700 features a 97- or 115-hp diesel engine.

machines extremely simple. Power application with hydrostatic directdrive is typically much smoother than traditional belt driven stump grinders, making the Model 2600 and Model 2700 a breeze to operate from swingout control panels or optional radio remotes. The Model 2600 features a 61-hp diesel engine, and the Model 2700 features a 97- or 115-hp diesel engine. Both machines ride on a rugged Torflex axle and go after stumps with swing arcs greater than 5 ft. (1.5 m). Both come standard with the Revolution cutter wheel, and both fea-

ture telescoping tongues to help finetune their position at the stump. Bandit Industries is a global manufacturer of wood processing machinery, ranging from industrial-grade hand-fed and whole tree wood chippers, horizontal grinders, stump grinders, forestry mowers and other specialty processing equipment. All equipment is manufactured by specialized teams at the company’s headquarters near Mount Pleasant, Mich. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

www.wagnerequipment.com Albuquerque, NM 505-345-8411 Aurora, CO 303-739-3000 Burlington, CO 719-346-7880 Colorado Springs, CO 719-635-1669 Durango, CO 970-259-2001 El Paso, TX 915-821-7651 Farmington, NM 505-327-5331 Grand Junction, CO 970-242-2834 Hayden, CO 970-276-3781 Hobbs, NM 575-393-2148 Pueblo, CO 719-544-4433 Windsor, CO 970-278-1750

www.tractorandequipment.com Billings, MT 406-656-0202 Billings-Southgate, MT 406-245-4426 Bozeman, MT 406-585-5800 Great Falls, MT 406-761-7900 Helena, MT 406-442-2990 Williston, ND 701-572-8377 Worland, WY 307-347-4747

www.ncmachinery.com Seattle, WA 425-251-5800 Chehalis, WA 360-748-8845 Fife, WA 253-896-0878 Monroe, WA 360-805-6000 Mount Vernon, WA 360-424-4292 Port Angeles, WA 360-452-9222 Wenatchee, WA 509-886-5561 Yakima, WA 509-248-2371 Anchorage, AK 907-786-7500 Dutch Harbor, AK 907-581-1367 Fairbanks, AK 907-452-7251 Juneau, AK 907-789-0181 Prudhoe Bay, AK 907-659-9600 Wasilla, AK 907-352-3400

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 13, 2014 • Page 45

www.holtcat.com 800-275-4658 Austin, TX • Bridgeport, TX Corpus Christi, TX • Fort Worth, TX Irving, TX • Laredo, TX Lewisville, TX • Longview, TX North Dallas, TX • Pflugerville, TX San Antonio, TX • Sonora, TX Texarkana, TX • Tyler, TX Victoria, TX • Waco, TX • Weslaco, TX

www.johnson-machinery.com Riverside, CA 951-686-4560 Indio, CA 760-342-1597 Murrieta, CA 951-696-1063 Hesperia, CA 760-947-0967

Committed to Uptime & Your Success

www.mustangcat.com Houston, TX 713-460-2000 Beaumont, TX 409-892-8412 Bryan, TX 979-775-7368 Bryan, TX 979-775-0639 Channelview, TX 281-452-7368 Conroe, TX 936-756-1110 El Campo, TX 979-543-3389 Freeport, TX 979-233-7368 Houston, TX 713-462-9993 Houston, TX 713-228-7368 LaMarque, TX 409-935-7000 Lufkin, TX 936-639-5551 Lufkin, TX 936-632-6775 Nederland, TX 409-722-7368

Cat.com © 2014 Caterpillar • All Rights Reserved • Printed in USA logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as CAT, CA ATERPILLAR, TERPILLAR, BUILLT T FOR ITT,, their respective resp corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 46 • December 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Purpose-built

from the ground up by Material handlers from SENNEBOGEN – 444,000 4,000 llbs. bs. tto o 75 7750,000 0,000 llbs. bs. Simple S imple design… design… Lift Lift more. morre. Mov Movee faster.. Save Save fuel. fuel. Run Run longer. Waukesha-Pearce Industries, Inc. Corporate Office: 12320 So. Main Houston, TX 77035 713/723-1050 • Fax: 713/551-0798 www.wpi.com

Tomball, TX 281/351-9016

Edinburg, TX 956/386-0107

Kilgore, TX 903/984-2011

San Antonio, TX 210/648-4444

Port Arthur, TX 409/721-5305

Pflugerville, TX 512/251-0013

Corpus Christi, TX 361/884-8275

Buffalo, TX 903/322-7150

Bane Machinery Inc.

Modern Machinery

Titan Machinery

www.banemachinery.com

www.modernmachinery.com

www.titanmachinery.com

Dallas, TX 214/352-2468

Fort Worth, TX 817/847-5894

Spokane, WA 800-541-0754

Boise, ID 800-221-5211

Denver, CO 303-286-7000

Omaha, NE 402-733-3700

Kent, WA 800-669-2425

Pocatello, ID 800-829-4450

Fargo, ND 701-237-3333

Sioux Falls, SD 605-336-3434

Rochester, WA 800-304-4421

Missoula, MT 800-332-1617

Portland, OR 800-950-7779

Kalispell, MT 800-434-4190

Eugene, OR 800-826-9811

Billings, MT 800-735-2589

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 13, 2014 • Page 47

CRUSHING

MATERIAL HANDLING

SCREENING

TRACKS

www.tkoequipment.com q p

WASHING & CLASSIFYING

www.modernmachinery.com y

Integrity. Generation After Generation. After being in business for almost a century, we’ve learned a thing or two. We know what it takes to keep your operation running smoothly: Commitment from your crew, quality equipment that works as hard as you do, and people that you can count on.

www.powermotivecorp.com p p

Generation after generation, we continue to meet the demands of the job by building innovative products. We’ve led the way since 1928, and that leadership shows through in the integrity of our team. We’re proud to still be doing business the way we did back then.

Page 48 • December 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Morbark Demo Event Marks National Manufacturing Day

L L I H E H T F O G N I K www.superior-ind.com

At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determination and energized by progress. How can we help you?

Official dealer partner in Texas, Louisiana, Mississippi, Oklahoma & Arkansas

Official dealer partner in Northern California.

McCOURT & SONS EQUIPMENT, INC.

COMPASS EQUIPMENT INC.

5141 Hwy 71 West LaGrange, TX 78945 979-242-5298 888-838-9252 www.portablescreen.com

4688 Pacific Heights Road Oroville, CA 95695 530-533-7284 530-533-8610 www.compassequip.com

POWER EQUIPMENT CO. 500 E. 62nd Ave. Denver, CO 80216 800-883-9284 www.power-equip.com Locations: Denver, CO Colorado Springs, CO Grand Junction, CO Casper, WY Albuquerque, NM

Morbark’s Demo Days give the company’s dealers, customers and guests the opportunity to not only watch the equipment in action, but also meet the people who build and support the equipment as they see firsthand the manufacturing processes utilized.

A number of important days coincided for Morbark Inc. on Oct. 3 — National Manufacturing Day, Morbark’s Demo Days event and the final stop of the Association of Equipment Manufacturers’ I Make America Harley Tour. Morbark’s Demo Days give the company’s dealers, customers and guests the opportunity to not only watch the equipment in action, but also meet the people who build and support the equipment as they see firsthand the manufacturing processes utilized. This year, because the event coincided with National Manufacturing Day, Morbark’s 300-plus guests included numerous special guests, including state and local elected officials and representatives from area schools, colleges and universities. “Having this event on National Manufacturing Day allows us to showcase our manufacturing technology and the careers available at Morbark and throughout the country,” said Morbark President Jim Shoemaker Jr. “Our Demo Days gives our guests a chance to see behind-the-scenes how Morbark builds our equipment, so having the event on National Manufacturing Day is a perfect fit.” Morbark’s employees and guests also

were able to check out the custom-painted “I Make America” Harley-Davidson Road King motorcycle that AEM will be giving away in November 2014. The I Make America Harley Tour is part of the I Make America campaign, which advocates for public policies that advance the interests of employees, communities and companies of the equipment manufacturing industry. The highlight of the event was the equipment demonstrations — including the new Barracuda slow-speed shredder, which made its debut in March at the ConExpo trade show; a redesigned 30/36 whole tree drum chipper; and the first chance to watch Morbark’s new portable flat deck shaker screen, which has just come off the company’s research and development line. Completing the demonstration lineup were: the Beever M20R forestry chipper; the 40/36 whole tree MicroChipper, which debuted last year; the 3200 wood hog horizontal grinder; the 1300B tub grinder; the 6600 track wood hog horizontal grinder. For more information, visit www.morbark.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 13, 2014 • Page 49

One crusher One screen One Lokotrack®

Lokotrack® LT220D™ Metso revolutionizes crushing with the new Lokotrack® LT220D™, combining a highproduction 3-deck screen and industry-leading Metso cone crusher in one compact, selfpropelled track unit. The high-efficiency LT220D™ is truly a game-changer: slashing capital, fuel/maintenance, transport, and overall operating costs. Call your Metso distributor today to learn more or see the innovative new LT220D™ in action! www.metso.com/lokotrack 5-year/10,000 hr Extended Protection Plan + 0% Financing Available!!

Offer good through December 31, 2014. Additional terms and conditions may apply.

CRISP INDUSTRIES, INC.

WESTATE

323 Energy Way • Bridgeport, TX 76426 940-683-4070 • 800-315-0871 • Fax: 940-683-2181 www.crispindustries.com info@crispindustries.com South Texas 78155 830-625-6822 Seguin, TX 78155 830-372-1110

P.O. Box 50370 • Billings, MT 59105 800-999-6676 • Fax: 406-373-6553 www.westate.com

WHEELER CRUSHING SYSTEMS

COMPASS EQUIPMENT 4688 Pacific Heights Rd. • Oroville, CA 95695 530-533-7284 • 530-533-8610 Fax: 530-533-7657 www.compassequip.com

Salt Lake City, UT • Hurricane, UT Ogden, UT • Vernal, UT 800-779-4450 www.wheelercat.com/crushing

CUTTING EDGE SUPPLY 234 East O Street • Colton, CA 92324 800-949-9014 • Fax: 909-825-4569 Phoenix, AZ • 800-729-1473 N. Las Vegas, NV • 702-649-1303

Page 50 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states.....................................................................Call

Summit Supply LLC 888-888-1248 • sales@summittracks.us 25-26 TM

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 24-25 DH Call McLaren 888-492-4230

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. 24-25 DH Call McLaren 888-492-4230

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 24-25 DH Call McLaren 888-492-4230

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

CLASSIFIEDS

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 Toll Free 1-800/523-2200 MATERIAL HANDLERS Material Handlers '05 Sennebogen 850M-C, Available for immediate sale! Good condition, 26,575 hours ......................................................................................................$140,000. 1999 Liebherr A932HD, Available for immediate sale! Good condition, 17,968 hrs ..............................................................................................................$125,000. Gibson Machinery, LLC 440-439-4000

NPK Construction’s Joseph R. Obergas Passes Away Joe Obergas, a NPK Construction Equipment sales representative, passed away in his sleep on Thanksgiving Eve, Nov. 26. He was 51. “Over Joe’s 26 year career at NPK he always tried to do more for our customers and dealers than they expected. Joe’s willingness to go the extra mile raised the bar for us all,” said NPK President Dan Tyrrell. “His humor and caring nature will be missed.” Mr. Obergas was the beloved husband of Patti; son of Richard and Patricia (both deceased); brother of Richard (deceased) (Jeanne Symons), Patricia Sobek (Larry), John and Robert; nephew of Steve and Kate Monchak and uncle of many. The family suggests contributions to the Cleveland Animal Protective League or the National Multiple Sclerosis Society, Ohio Buckeye Chapter. A mass was held at St. Mattias Church in Parma, Ohio, on Dec. 4. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Joe Obergas

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 51

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted TERRAMITE T5C BACKHOE | USED TERRAMITE T5C CONTACT: WYATT HARSHBARGER PHONE: 14172943359 EMAIL:HEWEYLEWEY18@GMAIL.COM –––––––––––––––––––––––––––––––– CASE 580 SUPER M 4X4 EXTENDAHOE CAB HEAT AND AIR | GOOD USED CASE SUPER M EXTENDAHOE 4X4 CAB W/HEAT AND AIR, LOW HOURS CONTACT: KENNETH L.SLOAN PHONE: 913 915-0447 FAX: 913 898-2343 EMAIL: SLOANCONSTRUCTION@YAHOO.COM –––––––––––––––––––––––––––––––– BURCHLAND SILT FENCE INSTALLER | BURCHLAND XTS SILT FENCE INSTALLER WITH 72" OFFSET BAR. CONTACT: MIKE PHONE: 252-207-8964 FAX: 252-261-5425 | EMAIL: MIKE@WMDUNNCONSTRUCTION.COM –––––––––––––––––––––––––––––––– AIR COMPRESSOR | 85-150 CFM COMPRESSOR CONTACT: ROGER BUTTON PHONE: 3157291913 EMAIL: RBSIGNMAN@MSN.COM –––––––––––––––––––––––––––––––– CAT 70/100/110/120 EXCAVATORS | LOOKING FOR CAT 70/110/120 EXCAVATORS-- PREFER UNADVERTISED CONTACT: EDDIE GREEN PHONE: 864-327-3909 EMAIL: EDDIE@BRUCEEQUIPMENT.COM –––––––––––––––––––––––––––––––– CAT EXCAVATORS | WE ARE LOOKING TO BUY CAT EXCAVATOR 330BL. CONTACT: RIZ PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– OLDER 90/120 PRENTICE LOG LOADER | AN OLDER LOADER TO MOUNT ON TRUCK OR TRAILER. STRONG ENOUGH TO LOAD 16/17-9 BULKLOGS 1 OR 3 AT A TIME CONTACT: RUSTY COOK PHONE: 850-381-3005 EMAIL: RUSTYWAYNECOOKSR.4345@GMAIL.COM –––––––––––––––––––––––––––––––– KUBOTA KH35 | LOOKING FOR SPROCKETS, BEARINGS AND RIGHT SIDE COVER FOR FINAL DRIVE CONTACT: LEON PHONE: 781-389-0773 EMAIL: TERBUP@YAHOO.COM –––––––––––––––––––––––––––––––– COMMERCIAL TRUCKS | LOOKING TO BUY ANY AND ALL SALVAGE, STOLEN, WRECKED OR HIGH MILEAGE HEAVY DUTY TRUCK, IN TEXAS, LOUISIANA, OR OKLAHOMA. CONTACT: BILL B PHONE: 281-745-7342 FAX: 713-675-1195 EMAIL:WABALDWIN@LKQCORP.COM ––––––––––––––––––––––––––––––––

CASE BACKHOES | 3. WE ARE LOOKING TO BUY 2WD CASE BACKHOE 580E/SE/M/SM/K/SK/L/SL. CONTACT: STEVE PHONE: 832-528-0786 EMAIL: STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDED TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE CALL OR EMAIL US. CONTACT: GRACE FRANCES PHONE: 2708492270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– 30 INCH PADS TO FIT JOHN DEERE 120 C EXCAVATOR, HAVE 24 INCH...COULD TRADE. CONTACT: JIM BLEDSOE PHONE: 816 324-5254 EMAIL: BLEDSOEM255@GMAIL.COM –––––––––––––––––––––––––––––––– 14 FT UTILITY TRAILER | 14 FT. FLAT BED SINGLE AXLE USED EXCELLENT CONDITION UTILITY TRAILER. TRAILER TO HAUL A 12 FT.POLARIS. MAX. PRICE $1000.00 CONTACT: TOM EMAIL: AZSUNSET60@SUDDENLINK.NET –––––––––––––––––––––––––––––––– USED WELDER GAS/ROCK BOX | USED GAS MILLER WELDER/ 12 YARD ROCK BOX CONTACT: VERNON PHONE: 8285578196 EMAIL: GRIBBLEVT@ CABLEYVONLINE.NET –––––––––––––––––––––––––––––––– JCB 208S | LOOKING FOR A NICE 208S JCB MACHINE WITH CAB AND HEAT AND SNOW BLOWER.. MACHINE IS MOST IMPORTANT TO ME CONTACT: KEN TEMBORSKI PHONE: 570.233,0351 FAX: 570.233.2399 EMAIL:AGGRESSIVEKEN@EPIX.NET –––––––––––––––––––––––––––––––– CAT ENGINE AND DOZER | NEED A CAT ENGINE 3406 OR 3408 FOR A CAT LOADER AND OLDER MODEL D8K AT WHOLESALE WITH OR WITHOUT RIPPER CONTACT: SANTIAGO SCARZELLA PHONE: 305 506 4263 EMAIL: SSCARZELLA@GMAIL.COM ––––––––––––––––––––––––––––––––

ANY BRAND | USED FRONT END LOADERS.4X4.PRICE UNDER $5,000 CONTACT: EDWARD THORNTON PHONE: (810)210-2002 EMAIL: EDWARDTHORNTONJR@YAHOO.COM –––––––––––––––––––––––––––––––– TLB CONTACT: JONAS PHONE: 0726389111 EMAIL: MALAKASFBX@GMAIL.COM –––––––––––––––––––––––––––––––– KUBOTA S5205 WHEEL LOADER CONTACT: JOHN T. HUDSON PHONE: 601-606-2223 FAX: 601-794-2734 EMAIL:HUMMERL@COMCAST.NET –––––––––––––––––––––––––––––––– CAT D8T | 5000 HOURS MAX, CAB, DRAWBAR, SU/T BLADE, SYSTEM ONE U/C. MUST BE CLEAN TRACTOR WITH VERY GOOD UNDERCARRIAGE CONTACT: BUZZY KEITH PHONE: 404-610-6754 EMAIL: BUZZY@USAMACHINERY.COM –––––––––––––––––––––––––––––––– BOBCAT/SKIDSTEER | I NEED A RUNNING BOBCAT. I AM WILLING TO PAY $2500-$3000. HAVE CASH IN HAND. BOISE IDAHO, WILL PICK UP. A COUPLE HUNDRED MILES DRIVE IS ACCEPTABLE. CONTACT: WILLIAM RESNER PHONE: 208-968-8968 EMAIL: WRESNER83@GMAIL.COM –––––––––––––––––––––––––––––––– CAT WHEEL LOADERS AND CAT MOTOR GRADERS | . MEGA EQUIPMENT INC. IS LOOKING TO BUY CAT WHEEL LOADERS 910, 920, 930, 936 & 936E.. MEGA EQUIPMENT INC. IS LOOKING TO BUY CAT MOTOR GRADERS 12G, 14G, 14H, 140G & 140H. CONTACT: RIZ PHONE: 281-491-0614 EMAIL: RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– USED CAT 953 TRACK LOADER CONTACT: DANNY EVERHART EMAIL: DANNY.EVERHART@YAHOO.COM –––––––––––––––––––––––––––––––– CAT | SEND PICTURES, DETAILS, AND PRICE. IF YOU HAVE ANY OF THE FOLLOWING : WHEEL LOADER CAT 936E CAT 950B CAT 950E CAT 966D CAT 966E 966F;966F;980C;980F KOMATSU WA6003;WA700-3 12G;14G;14H D8R;D9N;D9R WITH RIPPER 330BL CONTACT: FRANK PHONE: 832-655-2921 FAX: 832-655-2921 EMAIL:HAWKMACHINERY@AOL.COM –––––––––––––––––––––––––––––––– TIMKEN BEARING, #252-310 AND M 252-349 NEW OR USED CONTACT: GARY SISK PHONE: 816-517-4531 FAX: 816-230-6264 EMAIL:DRILLERGARY@YAHOO.COM ––––––––––––––––––––––––––––––––

BILLJAX ESCALADE UTILITY TRAILER | 3000 LB. MAX LOAD ESCALADE BILLJAX WITH HYDAULIC RAISING AND LOWERING BED FOR LIGHT WT. EQUIPMENT. I AM LOOKING FOR USED IN GOOD SHAPE CONTACT: RICK BOONSTRA PHONE: (616)293-9240 EMAIL: RICK.BOONSTRA@YAHOO.COM –––––––––––––––––––––––––––––––– RT CRANE | 2002/2006 30 TON ROUGH TERRAIN CRANE> GROVE, TEREX, LINKBELT, CLEAN + DRY CERTIFIED A PLUS A.S.A.P. CONTACT: DENNIS OPAT PHONE: 630-894-2778 FAX: 630-894-5063 EMAIL:DOPAT@CHICAGOCRANE.COM –––––––––––––––––––––––––––––––– TRAILERS | FLEET OR FLATBED OR STEPDECK TRAILERS CONTACT: WILLIE KIRCH EMAIL: WILLIEKIRCH@GMAIL.COM –––––––––––––––––––––––––––––––– LINCOLN AIR VANTAGE | WELDER AND AIR COMPRESSOR KUBOTA ENGINE CONTACT: RICK PHILLIPS PHONE: 4192330949 EMAIL: RPHILLIPS1961@LIVE.COM –––––––––––––––––––––––––––––––– BULLDOZER | I NEED TO BUY D9N BULLDOZER OR D9R MANUAL TRANSMISSION ASAP THANKS CONTACT: OUFI PHONE: 966530185141 EMAIL: ALOUFI01@HOTMAIL.COM –––––––––––––––––––––––––––––––– USED CATERPILLAR EXCAVATOR | NEED A QUOTE FOR FAIRLY USED AND LOW HOURS EXCAVATOR OF 20-25 KG/TON CAPACITY (CATEPILLAR) CONTACT: RICHARD PHONE: +2348037215213 EMAIL: DAPOIDOWU@YAHOO.CO.UK –––––––––––––––––––––––––––––––– CASE 580 LOADER BACKHOES | CASE 580 LOADER BACKHOES 580 SK , 580 L, 580 SL, 580 M, 580 SM, 580 N, 580 SN CONTACT: FRANK @ TRICO EQUIPMENT PHONE: 1-800 TRICO 50 FAX: 732-780-3618 EMAIL:FHORAN@TRICOEQUIPMENT.COM ––––––––––––––––––––––––––––––––

LOADER TIRE | LOOKING TO BUY 29.5X25 L5 LOADER TIRE WITH 80-85% WEAR TO MATCH OTHER TIRES. CONTACT: PHILIP DEMORANVILLE PHONE: 508-636-5771 FAX: 508 636 5707 EMAIL:PLD6000@YAHOO.COM –––––––––––––––––––––––––––––––– 3-5YD ROLL OUT / HIGH TIP BUCKET FOR WHEEL LOADER CONTACT: AUSTIN SEALS PHONE: 912-661-7820 EMAIL: AUSTIN.SEALS@ASCVOLVO.COM –––––––––––––––––––––––––––––––– UTILITY TRAILER | WORK TRAILERS CONTACT: FORAN AND ASSOCIATES PHONE: 9085816357 FAX: 9087307543 EMAIL:FORANANDASSOCIATES @GMAIL.COM –––––––––––––––––––––––––––––––– SKID SPRAYER EMAIL: NEWSOME1RN@GMAIL.COM –––––––––––––––––––––––––––––––– ASPHALT PAVERS | WE ARE LOOKING TO BUY SEVERAL UNITS OF ASPHALT PAVERS FROM ABG TITAN, DEMAG, DYNAPAC, AND VOGELE. IF YOU HAVE ANY, PLEASE SEND PICTURES, SERIAL NUMBER, CONDITION, LOCATION AND FINAL OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:AIMN@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– DOUBLE AXLE TRAILER | FITS 2.5/16 HITCH AND HAS AT LEAST 20FEET OF ROOM BY9FT CONTACT: GARYPOWELL PHONE: 217 691 5760 EMAIL: GARYPOWELL9028@COMCAST.NET –––––––––––––––––––––––––––––––– SCHWING CONCRETE PUMPS MOUNTED ON MACK TRUCKS 32METER TO 39 METER 1994 / NEWER CONTACT: WILLIAM CROSS PHONE: 407 595 8221 FAX: 407 843 0247 EMAIL:WILLIAM@CROSSPUMPING.COM –––––––––––––––––––––––––––––––– HAAS CNC W/4TH AXIS | 2X HAAS VF4 CONTACT: KEN YOSHIDA PHONE: 949-887-4701 EMAIL: KYOSH3@GMAIL.COM –––––––––––––––––––––––––––––––– KOMATSU WHEEL LOADER | LOOKING TO BUY KOMATSU WHEEL LOADERS WA600-1, WA600-3 AND WA700-3 CONTACT: STEVE PHONE: 281-491-0614 FAX: 281-727-0415 EMAIL:STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– CASE BACKHOES | WANTED TO BUY CASE BACKHOE 580SK, 580L, 580SL, 580M AND 580SM 2WD. CONTACT: RIZ SUNESARA PHONE: 832-528-0786 FAX: 281-727-0415 EMAIL:RIYAZSUNESARA@YAHOO.COM ––––––––––––––––––––––––––––––––

TRIAXLE END DUMP ROCK TRAILER 30 FOOT CONTACT: ROGER PHONE: 262-853-4504 FAX: 414-837-3972 EMAIL:ROGER.DEADENDTRUCKINGLLC@YAHOO.COM –––––––––––––––––––––––––––––––– LEEBOY 3000 FORCE FEED LOADER CONTACT: JERRY FARMER PHONE: 618.841.0978 EMAIL:JERRYF@MINERALPRODUCTSINC.COM –––––––––––––––––––––––––––––––– VIBRATOR | WACKER VIBRATOR PLATE FOR COMPACTION CONTACT: JASON TIDALGO PHONE: [805]929-5831 EMAIL: GERRYTIDALGO@YAHOO.COM –––––––––––––––––––––––––––––––– KOMATSU BULLDOZER D21P-6-61623. SEND THE PHOTOS IN DETAIL THEN GIVE YOUR PRICE CIF-HCMC. CONTACT: MRS DUYEN PHONE: 84-8-916193908 FAX: 84-8-38216727 EMAIL:DONGNGHI@HCM.VNN.VN –––––––––––––––––––––––––––––––– TRAILER BED 5 FT X10 | TRAILER WITH A BED ABOUT 5FTX10FT CONTACT: LEE DRESSEL PHONE: 763 345 9221 EMAIL: LEEDRESSEL@YAHOO.COM –––––––––––––––––––––––––––––––– BOBCAT XCHANGE COUPLER CONTACT: ROGER EMAIL: FEHROG82@HOTMAIL.COM –––––––––––––––––––––––––––––––– CRAWLER CRANE 250 TON CAPACITY. CONTACT: ROHIT PHONE: 9312790233 EMAIL: RKTYAGI1974@GMAIL.COM –––––––––––––––––––––––––––––––– LATE MODEL PLOW TRUCK | LATE MODEL SINGLE AXLE PLOW TRUCK WITH PLOW, WING, SANDER, AUTO IN THE 2002-2009 VINTAGE CONTACT: FRANK ELLEN PHONE: 1-563-212-0595 EMAIL:PUBLICWORKS@MAQUOKETA.COM –––––––––––––––––––––––––––––––– WE ARE LOOKING FOR SERIOUS SUPPLIER TO PROVIDE FOLLOWING EQUIPMENT FOR BEST COMPETITIVE PRICES 920 , 926, 926E , 930 , 936 , 936E , 936F , 950 , 950F , 966D , 966E , 966F, 980F & 988B ENGINE & TRANSMISSION FOR CAT966D , 966E , 966F 980C & 980 F & MOTOR GRADER 14 G BOBCAT S130 2000 TO 2014 & TOYOTA LIFT TRUCK DIESEL 5000 TO 40, 000 TON 2000 TO 2014 CONTACT : M.ASKARI TEL 819-246-9577 EMAIL: M.PFCDIESEL@VIDEOTRON.CA –––––––––––––––––––––––––––––––– 3141 DRESSER BACK HOE | LOOKING FOR A 3141 DRESSER , BACKHOE TO MOUNT ON THE BACK OF MY DRESSER 100 E TRACK LOADER CONTACT: JEFF EMAIL: JEFFREY12@GMAIL.COM ––––––––––––––––––––––––––––––––

Page 52 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Chicago, IL Wed., December 17, 2014 For: One Owner Liquidation Construction Equipment

December 16, 2014 • North East, MD December 16, 2014 • Farmington, NM December 17, 2014

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

• St. Louis, MO December 17, 2014

December 17, 2014

• Gulfport, MS Thurs., December 18, 2014 For: Late Model Excavation Equipment and more

• Chehalis, WA December 18, 2014

• ONLINE ONLY December 24, 2014

• Raleigh-Durham, NC December 18, 2014

• ONLINE ONLY December 31, 2014

• New Orleans, LA Fri., December 19, 2014 For: Complete Liquidation Sand & Gravel Operation – Late Model Top Brand

• Newark, NJ December 19, 2014

• Atlantic City, NJ Sat., December 20, 2014 For: Late Model Rental Returns

• Houston, TX February 11-12, 2015

• Albany, NY Sat., December 27, 2014 For: Rental Fleet Construction Equipment & more

• Orlando, FL February 16-20, 2015

• Columbus, OH Sat., January 10, 2015 For: Very Late Model Case & Cat Rental Return Auction & more

• Orlando, FL February 16-20, 2015

• Houston, TX Thurs., January 22, 2015 For: Late & Great Rental Fleet Construction Equipment • Queretaro, Mexico Fri., January 23, 2015 For: Large Quantity Late Model Cat Construction Equipment • Kissimmee, FL January 31 – February 8, 2015 For: 22nd Annual Construction Equipment, Truck & more • Las Vegas, NV Fri., March 6, 2015 For: Large Rental Return Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631

• Las Vegas, NV February 6, 2015

• Tipton, CA February 13, 2015

• Phoenix, AZ February 26, 2015

• Grande Prairie AB, CAN April 9-10, 2015 • Prince George BC, CAN May 6, 2015 • Lethbridge AB, CAN May 7, 2015 • Williston, ND May 20, 2015 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., December 13, 2014 For: Heavy Equipment & Commercial Truck Sales • Riverside, CA Sat., December 20, 2014 For: Heavy Equipment & Commercial Truck Sales • Sacramento, CA Sat., January 10, 2015 For: Heavy Equipment & Commercial Truck Sales

• Albuquerque, NM December 15, 2014

BIG IRON www.bigiron.com 800-937-3558

• Denver, CO

• ONLINE ONLY

CAT AUCTION SERVICES www.catauctions.com 866-750-9432 • ONLINE ONLY Wed., December 17, 2014 For: eQuipment Yard • Kissimmee, FL Fri., February 13, 2015 For: Construction Equipment COCHRAN AUCTIONS www.cochranauctions.com 301-739-0538 • Boonsboro, MD January 2-3, 2015 For:2 Day Winter Contractors Regional Equipment, Truck & Trailer Auction

IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • ONLINE ONLY December 17, 2014 • ONLINE ONLY December 18-19, 2014 J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • West Palm Beach, FL Sat., December 13, 2014 For: Heavy Equipment • Dallas, TX Thurs., January 29, 2015 For: Heavy Equipment • Philadelphia, PA Sat., January 31, 2015 For: Heavy Equipment

DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087

MANASSE AUCTIONEERS www.manasseauctions.com 607-692-4540

• Prospect, CT Sat., December 13, 2014 For: Construction Equipment

• Whitney Point, NY Sat., December 13, 2014 For: Year End Absolute Construction & Farm Equipment Auction

HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252 • Livingston, LA January 29-31, 2015 For: Construction Equipment, Trucks & Tractors HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Dunbar, PA Wed., December 17, 2014 For: Surplus Liquidation Golden Eagle Construction Co.

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • ONLINE ONLY December 8-15, 2014 For: Industrial Equipment & more • ONLINE ONLY December 10-17, 2014 • Lenoir, NC Tues., December 16, 2014 For: Construction Equipment & Related items • Pelzer, NC Wed., January 28, 2015

For: Construction Equipment & Truck Auction

QUANTOS AUCTIONS www.quantosauctions.com 253-236-8555

LLOYD MEEKINS & SONS AUCTION COMPANY www.meekinsauction.com 800-499-6560

• ONLINE ONLY December 15-17, 2014 For: 3 Day Construction Equipment Auction

• Lumberton, NC Tues., December 30, 2014 RITCHASON AUCTIONEERS For: 20th Annual Contractors INC. Auction www.ritchason.com 800-806-3395 • Pinetops, NC January 28-29, 2015 • Lebanon, TN For: Absolute Auction feaSat., December 13, 2014 turing Equipment & Trucks For: Heavy Equipment, from Trico Electric Co Trailers, Trucks & Commercial Vehicles MENDENHALL AUCTION CO., INC. www.mendenhallauction.com 336-889-5700 • High Point, NC Sat., December 20, 2014 For: Contractor & Municipal Equipment & Truck Auction

SHETRON AUCTIONS www.shetronequipment.com 717-532-8828 • Shippensburg, PA Fri., December 19, 2014 For: Construction & Farm Equipment

PETROWSKY STEFFES GROUP INC. AUCTIONEERS INC. www.steffesgroup.com www.petrowskyauctioneers.com 701-237-9173 860-642-4200 • ONLINE ONLY • North Franklin, CT December 8-16, 2014 December 19-20, 2014 For: 2 Day Dealer For: Major Public Auction – Realignment Auction Area Contractors & • ONLINE ONLY Equipment Dealers December 9-19, 2014 For: Large Late Model PURPLE WAVE AUCTION Equipment www.purplewave.com 866-608-9283 UTILITY AUCTIONS • ONLINE ONLY www.utilityauctions.net Tues., December 16, 2014 302-530-9103 For: Truck and Trailer • ONLINE ONLY Tues., December 16, 2014 For: United Rentals Auction • ONLINE ONLY Thurs., December 18, 2014 For: Construction Equipment • ONLINE ONLY Thurs., December 18, 2014 For: NoMug Construction Estate • ONLINE ONLY Wed., December 31, 2014 For: Construction Equipment

• Wilmington, DE Fri., December 19, 2014 For: Construction, Utility & Forestry Equipment YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Kissimmee, FL February 9-16, 2015 For: 41st Annual Consignment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 53

LAST AUCTION OF THE YEAR

DECEMBER 18–19 HUNDREDS OF INSPECTED AND GUARANTEED ITEMS FOR SALE!

2011 Sandvik DP1500i Crawler Mounted Blast Hole Drill

2003 Caterpillar CB-224D Vibratory Double Drum Compactor

2000 John Deere 260 Skid-Steer Loader

2000 Caterpillar 980G Wheel Loader

Baldor G1102 50 kVA Generator

Caterpillar 140G Motor Grader

Caterpillar 777B Off-Road End Dump Truck

Drilling Mud Mixing System on 1987 Ford L9000 T/A Truck

Vermeer T755 Trencher

888-433-5426

Buy. Sell. Fast. Easy. www.ironplanet.com California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet ®, IronClad Assurance® and Auctions you can trust ® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.

Page 54 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Challenges Include River Work, Controlling Water Flow DAM from page 32

in June 2015. The most challenging part of the construction will be controlling the water flow, Stuart said. “The time frame for in-water work is designed to coincide with the Deschutes lowest flow period. The water level is somewhat controlled by how much water is released from Wickiup Reservoir and is impacted in part by the needs of irrigation users. In addition to use of water for crops there is a period of time in the fall when stock ponds are being filled so more water is put down the Deschutes.” River work can be a challenge, said Linda Scronce-Johnson, Hamilton spokeswoman. “But Hamilton is a heavy civil contractor specializing in bridge work, so we’re very familiar with all the river work. It is unique. It is a niche, but it is our niche. It’s a fun project. We’re all excited to be involved.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

The project includes dividing the river into three channels. On the right will be the habitat channel at 80-ft. (24.4 m) wide. The center channel will be the white water channel, and also 80-ft. wide, and on the left, at 20-ft. (6 m) wide, will be the safe passage channel and also for fish passage.

NDA Convention, Expo Expecting Record Attendance in March 2015 With the demolition industry on the rebound and the city of Nashville as the setting for its annual convention and expo, the National Demolition Association (NDA) is predicting DEMOLITION 2015 to be one of the most well-attended events in the association’s history. DEMOLITION 2015 takes place March 21 to 24, 2015, at the Gaylord Opryland Resort and Convention Center. “Nearly all of our members are reporting business is booming and most are optimistic that they’ll reach pre-recession levels in the next few years. When you combine that kind of economic confidence with the draw of Nashville as a ‘must-see’ city, every indication is that DEMOLITION 2015 will be a record-setter for the industry,” said Mike Taylor, NDA executive director. “DEMOLITION 2015 is generating the same kind of buzz this time around for our members, many who will be coming to the event ready to place long-postponed orders for new equip-

ment and services,” Taylor said. Prospective exhibitors at DEMOLITION 2015 can access the complete package of registration materials posted on the NDA Web site. The annual event, which also is the most comprehensive education conference in the industry, pulls in an international audience of decision-making demolition professionals involved in every facet of the demolition process, including general contractors, civil engineering firms, and recycling, landfill, and architectural salvage operations. New in 2015 will be the addition of a fully outfitted “technology pavilion” which will showcase the technologies, systems, project management solutions and business tools that are creating new opportunities for demolition professional to increase margins and raise efficiency. “Our members have an intense interest in learning all about the new technology that’s available today and they are ready to buy,” Taylor said.

The technology pavilion exhibitor package for exhibitors includes not only all general exhibitor benefits, but also value-added pre-show promotional opportunities in the NDA Newsletter, NDA Web site and Demolition magazine, as well as special signage, booth upgrades and other benefits that extend year-round. A wide variety of sponsorship opportunities are still available, including gold and silver sponsorship opportunities. The Convention & Expo section of the NDA Web site includes access to the exhibitor prospectus; the technology pavilion flyer; a view of the expo floorplan; a list of all registered exhibitors to date; information on remaining sponsorship opportunities; booth personnel registration form; and an exhibitors-only portal.

EPA, Corporations Plan to Issue Final Rule on Ditches DITCHES from page 1

tions say nothing about ditches, the proposed rule expands EPA and Corps jurisdiction to the point where virtually any ditch with standing water could be covered. Specifically, ARTBA said that “roadside ditches are not, and should not be regulated as traditional jurisdictional wetlands since they are an essential part of any transportation improvement project and contribute to the public health and safety of the nation by dispersing water from roadways.” EPA and the Corps have indicated plans to issue a final rule by April of next year. The association will continue to oppose efforts to expand federal wetlands jurisdiction through both the regulatory and legislative arenas. For more than 20 years, ARTBA has been the transportation design and construction industry’s primary legal and regulatory advocate. In 2014, ARTBA submitted more than 30 sets of comments to various federal agencies on proposed regulations. (This story also can be found on ARTBA’s comments can be found in the “Regulatory” Construction Equipment Guide’s Web section of www.artba.org.

site at www.constructionequipmentguide.com.)

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 55

Page 56 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

More Than 3,600 Participate in Ritchie’s Fort Worth Sale

ore than 3,600 bidders participated online and in person at Ritchie Bros. Auctioneers’ multi-million dollar unreserved public equipment auction in Fort Worth, Texas, Dec. 3 to 4. Bidders came from 52 countries, including all 50 U.S. states. Approximately 50 percent of the equipment was sold to out-of-state buyers, from as far away as Vietnam, Germany, Egypt, Malaysia, Panama, the United Arab Emirates and more. Online bidders purchased 48 percent of the equipment The virtual bidding was hot and heavy on the trucks sold (by dollar value). and trailers. The auction featured more than 3,100 equipment items, including 120 plus truck tractors and 50 plus excavators, as well as a large selection of crawler tractors, loader backhoes, hydraulic excavators, wheel loaders, skid steer loaders, scissorlifts and more. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Paul and Anna Mae Hershberger, Hershberger Construction LLC in Delta, Colo., purchased this JLG lift along with four other pieces of equipment.

Travis Dykes (L) and Clifford Montgomery of FAAM Trucking in Crowley, Texas, plan to bid on this Freightliner. The registration line continued on into the afternoon.

Walter Hight (L) and his son, Walter Jr., H&H Construction in Mineral Wells, Texas, have been checking out this 921B Case loader.

United States Marine Corp Lance Corporal Kristen Wells and United States Marine Corporal John Solorzano of the Fort Worth Naval Air Station continue the tradition of the Toys for Tots Program in the Ritchie Bros. lobby. People donate an unwrapped toy and the Marines, who have been active in the program for many years, wrap and deliver these gifts to needy families across the country.

A line of trucks makes their way to the bidding ramp.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 57

BusinessCalendar

Construction, Elgin, Gradall, Kasi, Leeboy, Schwarze, Weiler, and many more. Roundtable discussions: Learn – for free – from contractors around the country. NASHVILLE: Enjoy Music City’s live performances, Southern hospitality and unbelievable cuisine. Regardless of your role in the construction industry, attending To view our Business Calendar online, National Pavement Expo will broaden your understanding of go to www.constructionequipmentguide.com. paving and pavement maintenance…with plenty of fun and camaraderie to boot. For more information on this event, conSAVE THE DATE! AGC of Minnesota 95th Annual Meeting “Bringing It Together” tact AC Business Media, Burnsville, MN at 508/743-8514 or 877/398-6945. Customer/Workforce/Technology When: Thursday, January 15, 2015 POWER SHOW OHIO From 9:00 AM until 7:00 PM 45th Annual Power Show Ohio Where: Minneapolis Marriott Southwest NEW DATES!!! 5801 Opus Parkway Thursday, January 29~~~Friday, January 30~~~Saturday, Minnetonka, (952) 935-0550 January 31, 2015 Contact: Denise Woods Ohio Expo Center, Columbus, Ohio dwoods@agcmn.org A complete power equipment industry exhibition! Phone: 651/796-2186 What is on display? On display is new agricultural, construction, and outdoor power equipment from more than 500 comNORTHERN GREEN EXPO panies. Where is the Power Show Ohio held? The show is held Minneapolis Convention Center in Columbus, Ohio at the Ohio Expo Center, home of the Ohio Minneapolis, MN The Northern Green Expo is going to take place from 14th – 16th State Fair. Two buildings will be used, the Celeste Center and the Bricker Building. Power Show Ohio is sponsored by the January, 2015 in Minneapolis. The show takes on the social challenges related to pollution, natural resources and climatic Ohio-Michigan Equipment Dealers Association, P. O. Box 68, changes need to be handled before it becomes too late. The Dublin, OH; show has been dedicated to provide the future generation a phone: (614) 889-1309 greener planet and life. The innovation done in the technologies email: dalford@amglicusa.com. promises to bring forth a healthier world for the future generation. The search for locating solution to environmental problems CENTS MARKETPLACE EXHIBITION can be found here. 21st century has been given the name Greater Columbus Convention Center, Century of Environment and The Northern Green Expo has been Columbus, OHIO Dates: January 7 thru 9, 2015 an aid towards it. For further information, please contact the Show Office at (651) Organized by Ohio Nursery & Landscape Association The CENTS Marketplace exhibition is one of the significant 633-4987 events that will be taking place for a period of three days. This American Society of Landscape Architects: 612/339-0797 show is organized with the purpose of increasing the buying and selling power of the products in the green industry. This NATIONAL PAVEMENT EXPO 2015 show platform will serve as an ideal platform for promoting the JANUARY 28-31, 2015 green industry products. The exhibitors will produce a huge Music City Center, NASHVILLE, TN range of products in the exhibition to make the visitors aware of Top 5 Reasons to Attend National Pavement Expo: CASE Equipment Giveaway: You could win a DV26 Vibratory latest products and technology. The CENTS Marketplace will be an effective place for the exhibitors to increase their business Double Drum Roller. FOUR-DAY Conference: Learn from the construction industry’s opportunities and create new contacts. The show will also arrange for a direct communication between exhibitors and the best and brightest. Exhibit Hall: See the latest equipment from some of the con- visitors. For more information on this event, please contact Ohio struction industry’s biggest names, including BOMAG, CASE Nursery & Landscape Association at 800/825-5062 or info@onla.org.

AED SUMMIT & CONDEX 2015 / Associated Equipment Distributors DATES: FEBRUARY 10, 2015 – FEBRUARY 13, 2015 VENUE: Orlando World Center Marriott 8701 World Center Drive Orlando, FL (Florida) 32821 Phone: 407/239-4200 . Introduce your company, products or services to potential new distributors . Enhance your brand image or identity . Improve your competitive position in the marketplace . Network with your current distributors . Introduce new products or services to existing distributors Each year the industry’s top executives gather at AED Summit & CONDEX trade show – the only show in the industry dedicated strictly to equipment distribution. Whatever happens this year, one fact is unchanged: Relationships are where business begins, and AED is still the only place where manufacturers and service suppliers have a unique opportunity to establish business relationships with successful construction equipment distributors. Success is all about partners – and CONDEX is your chance to create dialogue and build sound business relationships. For more information, contact Associated Equipment Distributors, Inc. at 630/574-0650. WORLD OF CONCRETE Dates: February 3 – 6, 2015 Place: Las Vegas Convention Center Las Vegas, NV Try your hand at the year’s newest products. It’s official! World of Concrete 2015 will be the largest show in over six years with 630,000+ net square feet of indoor and outdoor exhibit space and over 1,300 exhibitors. Come to the World of Concrete, roll up your sleeves and try your hand at the year’s newest products, equipment and services. Technology, training, resources and ideas – zoom in at the industry’s only annual international event designed specifically for commercial concrete and masonry professionals. WOC features innovative tools, construction machinery, construction equipment, safety training courses and training, technologies and unlimited networking opportunities to give you new ways to sustain and grow your business. World of Concrete is considered by many to be one of the top shows in the industry. The outdoor exhibit areas, including the hugely popular Artistry in Decorative Concrete, make World of Concrete THE ONLY event to attend in 2015! For more information: www.worldofconcrete.com AGC CONVENTION 96th Annual AGC Convention DATE: March 18-20, 2015 PLACE: San Juan, Puerto Rico Join us for the Convention!!! Business Suit Optional

No one knows the future, but gaining a comprehensive view of where you are, where you are going and where you need to be can only strengthen the educated decisions construction professionals have to make every day. Take the opportunity to step outside, analyze the direction your organization is heading, listen and compare that with other construction professionals and take that perspective back to your organization. As our premier event each year, the AGC Convention and Technology & Construction Solutions Expo is the ideal opportunity to see everything AGC can do for you and your business. This year’s convention will include professional development sessions covering: . Workforce Development . Drones in Construction . Leadership . Risk Management . Quality Control . Marketing . Much More! For more information, please contact The Associated General Contractors of America. General Inquiries: 703/548-3118 AGC Store Inquiries: 800/242-1767 Convention.AGC.org AEM MEDIA SERVICES presents BAUMA CONEXPO AFRICA BAUMA CONEXPO AFRICA will be held September 15 to 18, 2015 at the Johannesburg Expo Centre in Johannesburg, South Africa. The show is owned and organized by the Association of Equipment Manufacturers (AEM) and Messe Munchen International (MMI). Exhibit space sales are now open for Bauma ConExpo Africa 2015. Companies applying for space by February 12, 2015, will be included in the first round of booth assignments. After that date, applications will be accepted on a first come, first served basis. World-class exhibition in important marketplace Exhibitors at the last show pointed out the high quality of attendees. The 2015 show venue is the country’s largest purposebuilt exhibition and events facility, offering a modern space and services. And, show participants benefit from the global experience and customer service of AEM, organizer of CONEXPOCON/AGG, and MMI, organizer of BAUMA. BAUMA CONEXPO AFRICA has broad-based support from leading industry groups in Africa and worldwide. After 2015, the show goes to a threeyear cycle in response to local and international industry input. AEM is show exhibitor contact for the Americas: visit the show website: www.bcafrica.com for more details. Contact AEM at sales@aem.org or by telephone +1-414-298-4150/ toll free U.S. and Canada 800-867-6060.

Page 58 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com

A E D ......................................................................................17

HYDRAULICIRCUIT TECHNOLOGY ......................................2

ALLU GROUP ........................................................................17

INDEXATOR............................................................................19

ALPINE SALES & RENTAL CORP ........................................11

IROCK CRUSHERS ..............................................................42

ARTIC SNOW & ICE CONTROL ..........................................18

IRONPLANET ........................................................................53

ATI CORPORATION/LEVEL-BEST........................................12

KAWASAKI CONSTRUCTION MACHINERY........................25

BAR NONE AUCTION............................................................57

KOMATSU AMERICA CORP ......................................6,7,26,27

BARGAINS..............................................................................50

KOMATSU FINANCIAL ............................................................2

CATERPILLAR INC ..........................................................44,45

KPI-JCI ....................................................................................47

CEG SCALE MODELS ..........................................................22

LBX ..................................................................................30,31

CLASSIFIEDS ........................................................................50

LIEBHERR CONSTRUCTION EQUIPMENT ..........................5

CONSTRUCTION EQUIPMENT GUIDE

LIUGONG CONSTRUCTION MACHINERY..........................21

MINI/COMPACT PROMO ..............................................34

METSO MINERAL SCREENING ..........................................43

CHRISTMAS CARD ......................................................13

METSO MINERALS CRUSHING ..........................................49

WANTED ........................................................................51

MIDCO DEMOLITION TOOL CO ..........................................60

FL AUCTION PROMO....................................................38

MINNICH MANUFACTURING................................................14

BEAZLEY AUCTION PROMO ......................................55

NORAM..............................................................................36,37

DOOSAN INFRACORE AMERICA CORP ............................23

PEMBERTON ........................................................................18

DOOSAN PORTABLE POWER ............................................29

RANSOME EQUIPMENT SALES LLC ..................................51

DRESSTA NORTH AMERICA................................................39

RITCHIE BROS AUCTIONEERS ..........................................59

DYNAPAC ..............................................................................40

ROAD BUILDERS MACHINERY ..........................................2,9

FELLING TRAILERS ..............................................................35

SCHAEFER ENTERPRISES ................................................18

FLANGE LOCK ......................................................................12

SENNEBOGEN ......................................................................46

FLECO ATTACHMENTS ........................................................16

SULLAIR ..................................................................................6

FLUID CONTROL SERVICES ................................................6

SUPERIOR INDUSTRIES ......................................................48

GROVE CRANE ....................................................................10

VOLVO CONST EQUIP & SVCS ..........................................24

HENDRIX MACHINERY LLC ..................................................3

WORLD OF ASPHALT ..........................................................20

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 13, 2014 • Page 59

Unreserved public auctions

35,7

items

Heavy construction and trucks FFeatured eatured u upcoming pcoming auctions auctions

1 OF 3 – JOHN DEERE 310E (LAS VEGAS)

LLas as V Vegas egas N NV, V, USA USA Hou Houston ston TX, USA US SA Tipt Tipton on CA CA,, USA US SA Orlando FL, USA US SA Phoenix Phoenix AZ, US USA SA Gr Grande ande Pr Prairie airie AB, CAN Pr Prince ince George George BC, CAN Lethbridge Lethbridge AB, CAN Williston USA Williston ND, ND, US SA

FFebruary ebruary 6 FFebruary ebruary 11–12 FFebruary ebruary 13 13 FFebruary ebruary 116 6 – 20 FFebruary ebruary 26 Apri Aprill 9 – 10 May 6 May 7 20 May 2 0

1 OF 3 – 2013 JOHN DEERE 250G LC (ORLANDO)

FFeatured eatured it items ems in Nor North th America America Ameri 4 – 2012 PETERBILTT 388 (HOUSTON) 4 OF 5 – 2012 TEREX TA400 6x6 (PRINCE GEORGE)

UNUSED – 2013 KOMA ATSU D155AX-7 (LETHBRIDGE)

650+ excavators excavators 365+ crawler crawler tractors tractors 365+ wheel loaders loaders 145+ motor motor graders graders 265+ loader loader backhoes backhoes 480+ sskid kid ssteer teer lo loaders aders 135+ ar articulated ticulated du dump mp ttrucks rucks 50+ mot motor or scrapers scrapers 375+ 3 75+ du dump mp ttrucks rucks e... 125+ ccranes ranes and muc much h mor more...

TEREX RT175 75 TON (HOUSTON)

Bid w with ith confidence confidence ▸ No minimu minimum mb bids ids or rreserve eservve pric prices es ▸ Up tto o 100% fin financing ancing available available ▸ Ins Inspect pect and b bid id in per person son or on online line

Selll y Sel your our equipment Call C all today–any today–any nu number mber of items items accepted. accepted.

More it More items ems added d daily aily Visitt rb Visi rbauction.com auction.com tto o see al alll auctions and u up-to-date p-to-date listings. listings. 2010 KENWORTH T800B w/LIEBHERR LFTT1045-4.1 45 4 54 TON LOW MILEAGE (LETHBRIDGE)

1 OF 6 – UNUSED – 2014 VOLLVO SD115D (ORLANDO)

rbauction.com rb auction.com | 1.800.2 1.800.211.3983 11.3983 Au Auctioneer ctioneer E. R. B Butch utch Gr Graham aham # 6018, Au Auction ction CCompany ompany Bond #0470724, Au Auctioneer ctioneer Gr Greg eg Highsmit Highsmithh Bond # 0470728, Au Auctioneer ctioneer John Korrey Korrey Bond # 0470729, Au Auction ction B Business usiness License #AB303, Au Auctioneer ctioneer PPatrick atrick J. Hic Hicks ks # AAU2215, U2215, RRitchie itchie B Bros. ros. Au Auctioneers ctioneers (Americ (America) a) Inc Inc.. Au Auction ction CClerk lerk License #225, Au Auction ction ccompany ompany license #303043 *O *OAC. AC. TTerms erms and cconditions onditions ap apply. plyy.

Page 60 • December 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE