2 minute read

SOSTENIBILITÀ IN PRESTAMPA

lato, ma volendo fotografare il mercato della stampa, è evidente che nelle aziende ci sia una crescente volontà di revisione dei loro processi, cercando in ogni fase, di inserire nuove procedure, tecnologie o materiali che possano contribuire alla costruzione di un percorso produttivo sempre più sostenibile.

“Oggi in Italia solo il 10% circa della produzione di polimeri è realizzato con tecnologia sostenibile. Se si pensa che la matrice è il primo prodotto per la stampa, è evi-

Advertisement

Founded on a green idea and the passion of Enzo Napoletano, who has invested in this direction over the years with the aim of demonstrating that high quality can be achieved on wide web even without the use of solvents.

“The start was the most difficult moment. Today, however, all of this has turned into a significant advantage, because the result of excellence that distinguishes us is an added value, the result of perseverance, passion and years of research dente che qualcosa nel sistema deve migliorare. Bisogna cambiare forma mentis, fare formazione e informazione, dal reparto di produzione alla sala stampa, puntando e dando sempre maggiore fiducia ai giovani che, con la loro innata capacità di vedere il futuro in un modo diverso, rappresentano la giusta spinta al cambiamento. Sappiamo bene che la partenza è sempre il momento più difficile, ma l’esperienza maturata negli anni con questo processo ci consente di supportare al meglio i nostri clienti sia in banda larga che in banda stretta, con strategie di personalizzazione, costruendo percorsi su misura in grado di agevolare e velocizzare i reparti stampa”, conclude Enzo Napoletano. “Collaborare alla crescita tecnologica a favore dell’ambiente è una scelta imprescindibile di coerenza verso un futuro sostenibile, un dovere non solo in combining this matrix through latest generation software and hardware processes”, says Enzo Napoletano.

In recent years, Studio Enne’s production capacity has been doubled and continuous investments have led this small company from Campania to grow in size with an increasingly meaningful presence on the market: an important Italian company in terms of quality and green innovation. A result that boasts the ESKO HD FLEXO quality certification, the only one in Europe obtained on wide web with sustainable Dupont Cyrel® Fast matrices.

AN APPEAL TO TECHNOLOGY PARTNERS: “INVEST IN R&D FOR THERMAL TECHNOLOGY”

Sustainability represents for Studio Enne a transformative force of the company and is convinced that synergy is the key to walking faster “on the basis of nature”. “To grow in this direction it is necessary to push in several directions. Partners are essential to invest in deve - lopment and research on new technologies and, today more than ever, their presence is extremely important to expand and develop these results in favor of the environment in all printing sectors which include the world of converter.

A rapid and synergistic intervention of all the partners is needed because the evolution of the market clearly shows us that times are increasingly reduced and in a few years the discomfort will be felt, especially in sectors such as corrugated cardboard. Considering our personal experience we believe that each flexo plate, at least up to a thickness of 2.84, should be developed with the thermal system, totally eliminating the solvent, given the results obtained. This does not exclude our commitment to research and support new technologies and products in favor of the environment”, says Enzo Napoletano. For him thermal technology, if properly developed and supported by investments from suppliers, could have even more success at global level.

This article is from: