Book of Abstract of WCSEIT'2017 by Science and Education Research Council

WCSEIT 2017 - IV World Congress on Systems Engineering and Information Technology

November 26-29, 2017 Guimarães, Portugal

Efﬁcient Engineering of Complex Systems and Information Technology: a Symbiotic Relationship

BOOK OF ABSTRACTS

Edited by Claudio da Rocha Brito Melany M. Ciampi

Copyright © 2017, COPEC – Science and Education Research Council Claudio da Rocha Brito & Melany M. Ciampi (Publishers). All rights reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works, must be obtained from the publisher.

WORLD CONGRESS ON SYSTEMS ENGINEERING AND INFORMATION TECHNOLOGY – Efficient Engineering of Complex Systems and Information Technology: a Symbiotic Relationship. Guimarães, 2017. v.4 32p. BOOK OF ABSTRACTS –IV World Congress on Systems Engineering and Information. November 26-29, 2017. Orgs. Claudio da Rocha Brito (ISBN 978-85-65992-78-7) & Melany M. Ciampi (ISBN 978-85-66680-78-2). Science and Education Research Council, COPEC – Guimarães: WCSEIT, 2017. ISSN 2319-0507

1. Systems Engineering – Congress. 2. Information Technology –Congress I. BRITO, Claudio da Rocha. II. CIAMPI, Melany, M. III. Title CDD 378

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

Message from the General Chair On behalf of the organizing committee I would like to welcome the authors and participants of the WCSEIT2017 – IV World Congress on Systems Engineering and Information Technology that takes place in the Center for Computer Graphics (CCG), in University of Minho, our hosts institutions, in the city of Guimarães, the cradle of Portugal on the period of November 26 to 29, 2017. COPEC - Science and Education Research Council is internationally recognized for its accomplishments as an organization that works for the advancement of science, education and engineering research and that provides an environment in which professionals’ capabilities can be fully developed. The rapid advances in sciences require a substantial number of researchers, doctoral and postdoctoral fellows to be trained and a massive investment in research. WCSEIT is a forum to discuss the latest developments as well as to promote research and development in the core areas of Systems Engineering and Information Technology. WCSEIT2017 theme is “Efficient Engineering of Complex Systems and Information Technology: a Symbiotic Relationship” a theme that has brought up many quality papers. The WCSEIT2017 – IV World Congress on Systems Engineering and Information Technology is organized by COPEC – Science and Education Research Council and promoted by WCSEIT - World Council on Systems Engineering and Information Technology in Technical Cooperation (in alphabetical order): AAMP (Fishing Museum Friends Society), ABENC (Brazilian Society of Civil Engineers), ABENGE (Brazilian Society for Engineering Education), AENUI (Asociación de Enseñantes Universitarios de la Informática), ASEE (American Society for Engineering Education), ASIBEI (IberoAmerican Association of Engineering Education Institutions), GCMM (Global Congress on Manufacturing and Management), IEEE-Ed.Soc. (Education Society of the Institute of Electrical and Electronics Engineers), IFEES (International Federation of Engineering Education Societies), IGIP (Internationale Gesellschaft für Ingenieurpädagogik), INTERTECH (International Council for Engineering and Technology Education); ISTEC (Ibero-American Science & Technology Education Consortium), OERN (Institute of Engineers of Portugal – North Region), Porto Gente (PortFolk), RBE (Brazilian Network of Engineering), RCI (Réseau Carthagène d’Ingénierie), SBA (Brazilian Automation Society), SBC (Brazilian Computer Society), SEFI (Société Européenne pour la Formation des Ingénieurs), SHERO (Safety, Health and Environment Research Organization ), SPEE (Portuguese Society for Engineering Education), SPEED (Student Platform for Engineering Education Development) and WCCA (World Council on Communication and Arts). We have to thank in special our sponsors CNPq (National Council for Scientific and Technological Development) and CAPES (Coordination for Improvement of Personnel of Superior Level). WCSEIT2017 is honored to have as Local Chairs Prof. Dr. Rosa M. Vasconcelos, President of Pedagogical Council of University of Minho, and Prof. Dr. Luis A. Amaral, President of Centre for Computer Graphics (CCG) both esteemed specialists and leaders in theirs areas. Special thanks to all the participants for their collaborations, the reviewers for dedication and we would like to express our appreciation for the hard work of the team that helped us throughout the conference and that have cooperated for the success of the event such as the local organizing committee members and the staff. So on behalf of WCSEIT2017 Committees and myself we are extremely happy to welcome and talk to all the participants of the conference. We believe that all the participants will enjoy the informative workshops, global presentations and an abundance of networking opportunities. Our goal is to make WCSEIT2017 a rewarding and memorable experience for each participant. Thank you all.

Prof. Dr. Claudio R. Brito GENERAL CHAIR President of COPEC President of IEEE Ed.Soc

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

Message from the Technical Program Chair As the Program Chair, I want to express how we are glad that you have accepted our invitation to join WCSEIT2017 – IV World Congress on Systems Engineering and Information Technology. It is certainly another successful event that is the accomplishment of those who have dedicated time and efforts to make it happen. In special these people’s hard work starting with the Prof. Dr. Luis A. Amaral, President of Centre for Computer Graphics (CCG) and Prof. Dr. Rosa M. Vasconcelos, President of Pedagogical Council of University of Minho as well as Prof. Dr. Claudio R. Brito, President of IEEE Education Society. We could never forget to point out the host Institution Centre for Computer Graphics (CCG) and University of Minho, principally the local committee members who made a great job. Together we all have organized an exciting conference with a wide representation of specializations and interests. The program includes a variety of panels and roundtables designed to present cutting-edge research and theory. This successful conference program was possible thanks to the hard work of all staff members, reviewers and the local committee. We are sure that the conference will contribute to enlighten and provide a unique experience to all who take part in the event. WCSEIT2017 as a conference in the field of Systems Engineering and Information Technology that will add to the scientific community for its quality and for providing an opportunity to advance communication between academics, researchers and industry. With participants from around the world scientists from the university, the industry, and young researchers will have the chance to network and exchange useful knowledge. It is another major contribution for the development and dissemination of scientific achievements. We are very glad to have this edition of WCSEIT held in Guimarães, Portugal that is a city of millenary history with a rich cultural heritage. Guimarães is a city with a glorious past history, which is associated with the founding of the Portuguese national identity and the Portuguese language in the century XII. An amazing City to visit and enjoy! For last but not least we would like to thank all authors and participants for their collaborations, for attending the conference, bringing their expertise to our gathering making it a success. Thank you all and enjoy WCSEIT2017!

Prof. Dr. Melany M. Ciampi TECHNICAL PROGRAM CHAIR President of WCSEIT General Secretary of IEEE Ed.Soc.

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

Message from the Local Chairs

It is our great pleasure to welcome you to the WCSEIT2017 – IV World Congress on Systems Engineering ant Information Technology, to be held in Guimarães, Portugal, organized by COPEC – Science and Education Research Council and hosted by University of Minho and CCG – Centre for Computer Graphics. Guimarães is located in one of the most beautiful landscapes of the North of Portugal. In 2001, the Historic Centre of Guimarães was declared a World Heritage Site by UNESCO. The city is recognized by its beauty and historical monuments. As the first capital of Portugal, Guimarães is known as the place where the country was born - "The Cradle City" or "Birthplace City". The University of Minho (UMinho), founded in 1973, began its academic activity in 1975/76. UMinho is renowned for the quality of its research and teaching, the quality of its students, the public recognition given to its Alumni, and for its intervention and strong links with the local community and the surrounding region. UMinho has a student population of 19.500, out of which 7.000 are postgraduate students. The University has 1.300 teaching staff, all with a PhD, and 800 administrative and technical staff. UMinho has two major campi located 20 km apart: one in Braga and the other in Guimarães. Based on the campus of Azurém, in Guimarães, CCG – Centre for Computer Graphics is a private owned and non-profit association that positions itself as an "interface" between the source of knowledge (University of Minho) and market through applied research and technological development in fields related to computer graphics, information technology, communication and electronics and its applications. This is the environment that we provide to the WCSEIT2017 and we are making our best to welcome everyone. I expect you will find the experience here enjoyable and valuable as you participate in the broad range of session and social activities that have been scheduled.

Prof. Dr. Rosa M. Vasconcelos Prof. Dr. Luis A. Amaral LOCAL CHAIRS

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

Committees: General Chair: Claudio R. Brito Technical Program Chair: Melany M. Ciampi Local Chairs: Rosa M. Vasconcelos Luis A. Amaral Publication Chair: Victor A. Barros Technical Program Committee: Submission System Chair Henrique D. Santos

Melany M. Ciampi, Chair of Committee André L. Reda, Brazil Barb Bernal, USA Claudio R. Brito, Brazil Dan D. Budny, USA Edmilson R. Braga, Brazil Edmundo Tovar, Spain Henrique D. Santos, Portugal Irina A. Avenarious, Russia James Sluss, USA Luis A. Amaral, Portugal Manuel A. Castro, Spain María Feldgen, Argentina Maria M. Nascimento, Portugal Maria Uskova, USA Martín Llamas Nistal, Spain Osvaldo Clúa, Argentina Rosa M. Vasconcelos, Portugal Russ Meier, USA Victor A. Barros, Brazil Vladimir G. Zakharov, Russia Vladimir Uskov, USA Walter W. Buchanan, USA Yolanda Guran-Postlethwaite, USA

Advisory Committee: Bevlee Watford, President of ASEE Claudio R. Brito, President of IEEE Ed. Soc. Hanno Hortsch, President of IGIP Michael E. Auer, President of IFEES Mike Murphy, President of SEFI Muthar Al-Ubaidi, President of INTERTECH Tiia Rüütmann, President of IMC Medical Committee: Carolina da Rocha Brito Catharina da Rocha Brito Cecilia da Rocha Brito Fernando Reis Menezes Sidney Capps Fernandes

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

WCSEIT2017– PROGRAM AT GLANCE Time 8:30 am 9:00 am 9:00 am 9:30 am 9:30 am 10:00 am 10:00 am 10:30 am 10:30 am 11:00 am 11:00 am 11:30 am 11:30 am 12:00 pm 12:00 pm 12:30 pm 12:30 pm 1:00 pm 1:00 pm 1:30 pm 1:30 pm 2:00 pm 2:00 pm 2:30 pm 2:30 pm 3:00 pm 3:00 pm 3:30 pm 3:30 pm 4:00 pm 4:00 pm 4:30 pm 4:30 pm 5:00 pm 5:00 pm 5:30 pm 5:30 pm 6:00 pm 6:00 pm 6:30 pm 6:30 pm 7:00 pm 7:00 pm 7:30 pm 7:30 pm 8:00 pm 8:00 pm 8:30 pm 8:30 pm 9:00 pm 9:00 pm 9:30 pm 9:30 pm 10:00 pm

Sunday 26

Monday 27

Tuesday 28

Wednesday 29

Registration

Technical Session

Workshop I

Coffee Break

Plenary Session II

Technical Session II

Workshop I

Lunch

Plenary Session III

Technical Session III

Workshop II

Coffee Break

Closing Session

Coffee Break

Opening Session Plenary Session I

Free

Registration

Cultural Session

Technical Session I

Workshop II

Free

Banquet (for adhesion)

Time 8:30 am 9:00 am 9:00 am 9:30 am 9:30 am 10:00 am 10:00 am 10:30 am 10:30 am 11:00 am 11:00 am 11:30 am 11:30 am 12:00 pm 12:00 pm 12:30 pm 12:30 pm 1:00 pm 1:00 pm 1:30 pm 1:30 pm 2:00 pm 2:00 pm 2:30 pm 2:30 pm 3:00 pm 3:00 pm 3:30 pm 3:30 pm 4:00 pm 4:00 pm 4:30 pm 4:30 pm 5:00 pm 5:00 pm 5:30 pm 5:30 pm 6:00 pm 6:00 pm 6:30 pm 6:30 pm 7:00 pm 7:00 pm 7:30 pm 7:30 pm 8:00 pm 8:00 pm 8:30 pm 8:30 pm 9:00 pm 9:00 pm 9:30 pm 9:30 pm 10:00 pm

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

SESSION AND PRESENTATION CODES Codes are used to determine when and where a paper is presented.

Technical Session Coding A three - character designator is associated with each technical session, as in LDT Where: L – is a letter that designates the language of the session: E – designates English sessions and papers; P – designates Portuguese sessions and papers; D – is a letter that designates the day of the session: M – designates Monday sessions and papers; T – designates Tuesday sessions and papers; T – is a number that designates the time slot for the session: 1 is early morning (9:00 am - 10:30 am); 2 is late morning (11:00 am - 12:30 pm); 3 is early afternoon (2:30 pm - 4:00 pm); 4 is late afternoon (4:30 pm - 6:00 pm); Note. Five minutes will be allowed for introductions and instructions at the beginning of each session. Each paper will be given 10 minutes for the total presentation, with two minutes for questions. All papers will start in 12 – minutes increments to allow conference attendees to “session hop” hear papers of interest. If there is a no-show author in a session, a 12 - minutes break will be called. Papers will not be moved up in sessions. Papers times for sessions are shown below. Session Begins First paper Second Paper Third Paper Fourth Paper Fifth paper Sixth paper Seventh paper Session Ends

9:00 9:05 9:17 9:29 9:41 9:53 10:05 10:17 10:29

11:00 11:05 11:17 11:29 11:41 11:53 12:05 12:17 12:29

2:30 2:35 2:47 2:59 3:11 3:23 3:35 3:47 3:59

4:30 4:35 4:47 4:59 5:11 5:23 5:35 5:47 5:59

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

Sunday – November, 26 2:00 pm – 2:30 pm REGISTRATION 2:30 pm – 6:00 pm CULTURAL SESSION The exceptionally well-preserved Historic Centre of Guimarães, located in the northern Portugal district of Braga, is often referred to as the cradle of the Portuguese nationality. The history of Guimarães is closely associated with the creation of the national identity and language of Portugal. The city was the feudal territory of the Portuguese Dukes who declared the independence of Portugal in the mid-12th century. Founded in the 4th century, Guimarães became the first capital of Portugal in the 12th century. Its historic centre is an authentic example of the evolution of a medieval settlement into a modern town, its rich building typology exemplifying the specific development of Portuguese architecture from the 15th to the 19th centuries through the consistent use of traditional building materials and techniques. This variety of different building types documents the responses to the evolving needs of the community. A particular type of construction developed here in the Middle Ages was used widely in the then Portuguese colonies. It featured a ground floor in granite with a halftimbered structure above, a technology that was transmitted to Portuguese colonies in Africa and the New World, becoming their characteristic feature.

The Historic Centre of Guimarães is distinguished in particular for the integrity of its historically authentic building stock. Examples from the period from 950 to 1498 include the two anchors around which Guimarães initially developed, the castle in the north and the monastic complex in the south. The period from 1498 to 1693 is characterized by noble houses and the development of civic facilities, city squares, etc. While there have been some changes during the modern era, the historic centre of Guimarães has maintained its medieval urban layout. The continuity in traditional technology and the maintenance and gradual change have contributed to an exceptionally harmonious townscape. Guimarães City reflects the evolution of some private buildings from medieval times to the present, with a particular focus between the fifteenth and nineteenth centuries. It is a city with a glorious past history, whose history is linked to the foundation of the Portuguese national identity and the Portuguese language in the century XII. In 1143, after a 15-year rebellion by Dom Afonso Henriques (Afonso I), who defeated his mother Countess Teresa of Portugal, regent of the County (Condado) of Portugal and loyal to the Kingdom of Leon, at the battle of Sao Mamede (Batalha de Sao Mamede) near the town of Guimaraes, in June of 1128. However, the true test of an independent nation did not happened until 1385. Joao Mestre de Avis (John of Avis), with the help of legendary supreme constable Nuno Alvares Pereira, defeated the Castilians at the epic Aljubarrota battle, where the Castilians outnumbered the Portuguese 6:1. John I (Dom Joao I) was crowned King of Portugal. Indeed, history is everywhere. Visitors can spend the night in regal 900-year-old pousadas or tour a restored 10thcentury castle. The Paço dos Duques de Bragança is an eye-catchingly austere palace and locals will point out that much of its imperial-Gothic grandeur is a product of a comprehensive 20th-century renovation during the regime of the dictator António de Oliveira Salazar. The city surely boasts museums that house extensive collections of historical pieces and artifacts. One of these is the Alberto Sampaio Museum, which mainly exhibits religious art. Its most important possessions are the tunic worn by Joao I in the 1385 Battle of Aljubarrota and a silver altarpiece that is said to have been taken from the defeated Spanish king. Then there is the Martins Sarmento Museum, which houses a collection of historical pieces © 2017 WCSEIT

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

found from the Celtic settlement of Citania de Briteiros. Furthermore, the Citania de Briteiros is an archaelogical site that is open for visitors to marvel at. It is founded on 150 stone huts, two of which were restored to their original appearance.

From the castle, the beautiful cobbled Rua de Santa Maria has remained essentially unchanged for centuries, and leads down into the heart of the old town, where there are superbly restored historic buildings. One of those buildings is the former 16th-century Baroque convent of Santa Maria, now serving as the City Hall. At the end of the street are two delightful squares with outdoor cafes and balconied houses, Praça de Santiago and Largo da Oliveira. At Largo da Oliveira are the old Town Hall and the Church of Nossa Senhora da Oliveira, with a Gothic shrine erected in 1340 standing before it. The sprawling Vila Flor, though, has been at the helm of the city’s awakening, hosting everything from revamped open-air Shakespeare productions to large-scale gigs by foreign indie acts. Outside the historic center, young creative talent is attempting a similar feat, transforming the city’s semiderelict industrial zones into hives of artistic enterprise. Guimarães has long been the country’s largest textile-manufacturing hub, but since the early ’90s, cheap overseas labor has lured businesses away from the area, and many factories stand vacant. One of these buildings is now home to the Center for Arts and Architecture. Opening to the public the center is the brainchild of the architects Ricardo Areias, a Guimarães native, and his wife, Maria Luis Neiva. In 2008, the pair returned from New York, where Mr. Areias studied and later taught at Columbia University, with the goal of opening an arts cooperative similar to places they’d seen develop in Brooklyn. The former mill now has production studios, an architecture library, a screening room, exhibition and rehearsal spaces and a black box theater. Sophisticated Portuguese fare can also be found in the city center, including at Histórico, which reopened in a smartly renovated 17th-century palace. In the restaurant’s picturesque courtyard, well-maintained middle-aged professionals drink rich Douro wines, listen to live fado music, and dine on bacalhau, or codfish, which is grilled or baked into creamy potato casserole. Another highlight is the alheira, a crusty sausage made from partridge, chicken and bread that was reputedly invented by Jews during the Inquisition in an attempt to pass themselves off as good, pork-loving Catholics. It is a grateful experience to have this tour starting in the Alberto Sampaio Museum. So let’s meet in front of the Museum at 3:30 pm and the address is in Historical Center at R. Alfredo Guimarães 39, 4810-250 Guimarães See you there! © 2017 WCSEIT

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

Monday – November, 27 The conference will happen in Associação CCG/ZGDV: Centro de Computação Gráfica. The address is Campus de Azurém, 4800-058, Guimarães, Phone: +351 253 510 580 and GPS coordinates are: 41º27’11.80’’ N (+41.4532778) and -8º17’18.21” W (-8.29345). 8:30 am – 3:30 pm REGISTRATION 9:00 am – 10:00 am OPENING SESSION Chair: Prof. Dr. Claudio R. Brito – General Chair of WCSEIT2017 Prof. Dr. Melany M. Ciampi – Technical Program Chair of WCSEIT2017 Prof. Dr. Luis A. Amaral – Local Chair of WCSEIT2017 Prof. Dr. Rosa M. Vasconcelos – Local Chair of WCSEIT2017 10:00 am – 10:30 am PLENARY SESSION I Chair: Prof. Dr. Claudio R. Brito – President of COPEC EFFICIENT ENGINEERING OF COMPLEX SYSTEMS AND INFORMATION TECHNOLOGY: A SYMBIOTIC RELATIONSHIP Speaker: Prof. Dr. Melany M. Ciampi – President of WCSEIT 10:30 am – 11:00 am Coffee Break 11:00 am – 12:30 pm PLENARY SESSION II Chair: Prof. Dr. Luis A. Amaral – President of Centre for Computer Graphics (CCG) Portugal ENGINEERING CAREER WHAT CAN YOU DO? Speaker: Prof. Dr. Rosa M. Vasconcelos – President of Pedagogical Council of University of Minho (UMinho) Portugal 12:30 pm – 2:30 pm LUNCH 2:30 pm – 4:00 pm PLENARY SESSION III Chair: Prof. Dr. Rosa M. Vasconcelos – President of Pedagogical Council of University of Minho (UMinho) Portugal ASYMMETRIES IN DIGITAL TRANSFORMATION: THE CONSTRUCTION OF THE INFORMATION SOCIETY Speaker: Prof. Dr. Luis A. Amaral – President of Centre for Computer Graphics (CCG) Portugal 4:00 pm – 4:30 pm Coffee Break 4:30 pm – 6:00 pm TECHNICAL SESSION EM4 Chairs Eugênio S. Almeida Walter W. Buchanan FUSION OF TRADITIONAL ENGINEERING PHYSICS WITH MODERN DEMANDS OF EXTRAMURAL INDUSTRIAL EVENING EDUCATION Vladimir G. Zakharov, Irina A. Avenarius ............................................................................................. 21 ENGINEERING DESIGN COURSE DEVELOPMENT Ali Mehrabian, Walter W. Buchanan, Ali Rahrooh, M. Kudret Yurtseven ............................................. 21 SOME THOUGHTS ON COMPLEXITY MANAGEMENT THROUGH SYSTEMS THINKING M. Kudret Yurtseven, Walter Buchanan ............................................................................................... 22 CONCEPTS OF ENGINEERING DESIGN AND COMPLEX SYSTEMS Walter Buchanan, Ali Mehrabian, M. Kudret Yurtseven ....................................................................... 22 © 2017 WCSEIT

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

A FRAMEWORK TO ANALYZE MASSIVE DATA FROM APPLICATIONS AND SERVICES OF A METEOROLOGICAL DATA CENTER Eugênio Sper de Almeida, Ivo Koga .................................................................................................... 23 BUSINESS ALIGNMENT AND IT GOVERNANCE USING AGENT-BASED MODELING José Tomaz .......................................................................................................................................... 23

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

Tuesday – November, 28 8:30 am – 3:30 pm REGISTRATION 9:00 am – 10:30 am TECHNICAL SESSION PT1 Chairs Leonardo da Cunha Brito Luiz H. A. Monteiro EXPERT SYSTEM WITH OPTIMIZED DIAGNOSIS OF POWER TRANSFORMERS André Pereira Marques, Cláudio Henrique Bezerra Azevedo, José Augusto Lopes dos Santos, Leonardo da Cunha Brito, Cacilda de Jesus Ribeiro, Nicolas Kemerich de Moura, Yuri Andrade Dias, Adson S. Rocha .......................................................................................................................... 24 ON IDENTIFYING PARAMETERS OF AN EPIDEMIC MODEL BY USING GENETIC ALGORITHM ... Deivison M. Gandini, Luiz H. A. Monteiro ............................................................................................. 24 LANGUAGE LEARNING TECHNOLOGIES: RESEARCH PERSPECTIVES José Macário de Siqueira Rocha, Claudia H. Rocha, Joni A. Amorim ................................................. 24 RESEARCH PROJECTS AND CASE STUDIES OF TECHNOLOGY ASSISTED LANGUAGE LEARNING José Macário de Siqueira Rocha, Claudia H. Rocha, Joni A. Amorim ................................................. 25 ANALYSIS OF COLLABORATIVE PROJECTS IN RESEARCH, DEVELOPMENT AND INNOVATION Joni A. Amorim, José Macário de Siqueira Rocha, Oswaldo Luiz Agostinho ...................................... 25 EVOLUTION OF DISEASES IN THE PUBLIC HEALTH SYSTEM OF BRAZIL IN 15 YEARS OF SUS Carlos Acácio de Lima ......................................................................................................................... 26

10:30 am – 11:00 am Coffee Break 11:00 am – 12:30 pm TECHNICAL SESSION PT2 Chairs Paulo Henrique Cruz Pereira Luiz Heleno Moreira Duque

INSPECTION OF FACADES USING MOBILE ROBOTICS FOR SURVEYING DAMAGE CAUSED BY COATING MORTARS DUE TO WEATHERING Paulo Henrique Cruz Pereira, Adelcio Bertoldo, Luiz Pinheiro da Guia, José Eduardo S. Gomes, Anna Paula Maldonado Pereira ........................................................................................................... 26 BLOCKCHAIN IN MANUFACTURING REVOLUTION BASED ON MACHINE TO MACHINE TRANSACTION Geraldo José Dolce Uzum Martins, Rodrigo Franco Gonçalves .......................................................... 27 PROPOSAL FOR A PROTOCOL FOR THE EVALUATION OF POSTURAL CONTROL THROUGH CINEMETRY: AN ANALYSIS OF TEST "T" CONSTRUCTION AND VALIDATION OF THE TOPUS SCALE Lívia Cristina Mietherhofer de O. Lammoglia, Luiz Heleno Moreira Duque ......................................... 27 RESTRICTIVE STEREOTYPES IN THE SCOPE OF INFORMATION TECHNOLOGY Ana Flávia Resende Oliveira Honório, Elis Magalhães Santos de Freitas ........................................... 27 INDUSTRIAL POTENTIAL POLLUTER ANALYSIS BASED ON GEOGRAPHIC INFORMATION SYSTEMS Luiz Cládio Dalmolin, Nilson Ribeiro Modro, Rafael de Medeiros Sperb ............................................. 28 ACADEMIC PRODUCTION AND THE WORLD VEHICLE PRODUCTION VOLUME. DO THE PRACTICES OF THE AUTO INDUSTRY REFLECT IN ACADEMIC STUDIES? Fabiana Giusti Serra ............................................................................................................................ 28

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

12:30 pm – 2:30 pm LUNCH 2:30 pm – 4:00 pm TECHNICAL SESSION PT3 Chairs Polyane Alves Santos Roniere Leite Soares

EXECUTION OF DIFFERENTIAL AND INTEGRAL CALCULUS IN APPLIED ROBOTICS IN A LINE FOLLOWER ROBOT WITH PID Polyane Alves Santos, Liandra Araújo Souza, Gabriel de Oliveira Santos, Wilquer de Lima Pereira, Gessica da Silva Pereira ...................................................................................................................... 29 ROBOTIC MOVEMENTS COMBINED WITH MATHEMATICAL CALCULATIONS Polyane Alves Santos, Ítalo Santos Bonfim, Gabriela Gama da Silva ................................................. 29 A SURVEY OF ALGORITHM AND TECHNIQUES FOR SECURITY AND PRIVACY PRESERVING DATA Francimaria R. S. Nascimento, Flavius L. Gorgônio, Karliane M. O. Vale ........................................... 29 THE WEB 3D PLATFORM AS A TEACHING TOOL IN ENGINEERING Carlos Magno de Lima, Felipe Pinheiro Maia ...................................................................................... 30 POTENTIAL OF THE ORIGINPRO 8 SRO V8.0724 (B724) COMPUTATIONAL TOOL IN THE GENERATION OF NONLINEAR FUNCTIONS DESCRIBING EXOTHERMIC AND ENDOTHERMIC CURVES IN A NI50TI30HF20.AT% METALLIC ALLOY WITH EMF Roniere Leite Soares, Walman Benício de Castro, José Lion Oliveira Julião, Kleanny Gama Sales de Souza .............................................................................................................................................. 30 IMPACT OF THE INTERNET OF THINGS ON INDUSTRY 4.0: A SYSTEMATIC REVIEW OF LITERATURE Benedito Cristiano Aparecido Petroni, Irapuan Glória Júnior, Rodrigo Franco Gonçalves .................. 31 COMPUTATIONAL THINKING, EDUCATIONAL ROBOTICS, AND SIGNIFICANT LEARNING: THE COMPETENCY OF THE INVISIBLE SUBJECT Elcio Schuhmacher, Vera Rejane Niedersberg Schuhmacher ............................................................. 31 USE OF CAD AND CAM TECHNOLOGIES IN THE DESIGN, MODELING AND PRODUCTION PROCESS OF A MECHANICAL AND BIONICS PROSTHESIS OF THE UPPER LIMB EXTREMITY Bruno Borges da Silva, Luiz Antonio Vasques Hellmeister, Rodolfo Nucci Porsani, André Luiz Alves Guimarães ............................................................................................................................................ 31 APLICATION OF AIDED TECHNOLOGY ON THE DEVELOPMENT OF AN EXTRUDER MACHINE TO PRODUCE 3D PRINTER RECYCLED FILAMENT Gabriel Seolin Jurisato, Luiz Antonio Vasques Hellmeister, Augusto Seolin Jurisato, Rodolfo Nucci Porsani ................................................................................................................................................. 32

4:00 pm – 4:30 pm CLOSING SESSION Chair: Prof. Dr. Claudio R. Brito – General Chair of WCSEIT2017 Prof. Dr. Melany M. Ciampi – Technical Program Chair of WCSEIT2017 Prof. Dr. Luis A. Amaral – Local Chair of WCSEIT2017 Prof. Dr. Rosa M. Vasconcelos – Local Chair of WCSEIT2017 8:00 pm – 11:00 pm THE BANQUET Let’s enjoy the opportunity to be with colleagues in an inspiring environment for a pleasant dinner. The tickets will be available at the reception desk.

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

Wednesday – November, 29 8:30 am – 3:30 pm REGISTRATION 9:00 am – 12:30 pm WORKSHOP I USER-CENTERED DESIGN Prof. Joana Vieira – Centre for Computer Graphics (CCG) – Portugal 12:30 pm – 2:30 pm LUNCH 2:30 pm – 6:00 pm WORKSHOP II FATORES HUMANOS NAS TICE Prof. Joana Vieira – Centre for Computer Graphics (CCG) – Portugal

November 26 - 29, 2017, Guimarães, PORTUGAL IV World Congress on Systems Engineering ant Information Technology

PLENARY SESSION EFFICIENT ENGINEERING OF COMPLEX SYSTEMS AND INFORMATION TECHNOLOGY: A SYMBIOTIC RELATIONSHIP Claudio R. Brito, Melany M. Ciampi, Victor A. Barros This paper aims to present the important aspects of the WCSEIT – World Congress on System Engineering and Information Technology. It is an international high standard platform for scholars, researchers and practitioners to discuss interdisciplinary research and practices in the fields of System Engineering and Information Technology. This high standard edition is very special because it is a joint venture of WCSEIT – World Council on System Engineering and Information Technology, the CCG – Centre for Computer Graphics, in University of Minho, in Guimarães, Portugal and COPEC – Science and Education Research Council. The three organizations have been working together along a year putting up a top scientific congress with quality and impact in academic and professional communities. WCSEIT2017 presents workshops, special sessions and oral presentations. TECHNICAL SESSION EM4

FUSION OF TRADITIONAL ENGINEERING PHYSICS WITH MODERN DEMANDS OF EXTRA-MURAL INDUSTRIAL EVENING EDUCATION Vladimir G. Zakharov, Irina A. Avenarius Lukhovitsy is a remote but very important industrial centre situated in 150 km southeast of Moscow. The industrial aviation is one of dominating branches of modern industry there. That is why the idea to bring the education closer to the students immediately involved in the industrial process became the principal goal of the educational project. The Extra-Mural Industrial Evening Education (EMIEE) is demanded by a large contingent of industrial workers dealing with modern technology and information techniques. The course of lectures and practicals (seminars) with laboratory works is intended for three semesters ending with exams and presented in this article. The detailed program and related problems are discussed.

ENGINEERING DESIGN COURSE DEVELOPMENT Ali Mehrabian, Walter W. Buchanan, Ali Rahrooh, M. Kudret Yurtseven

April 17 - 20, 2017, Guimarães, PORTUGAL IX World Congress on Communication and Arts

Here is presented an overview of the efforts involved in the development process of a new course in engineering design. This course would be a compliment to an existing senior design capstone project course currently offered, in addition to a project management course. The three-course package would be a robust sequence of courses for enhancing the skill sets required in designing new engineering products and improving the current ones. The economical and timesaving advantages are briefly addressed, and the prerequisites are presented and discussed. Furthermore, some computational tools and resources are identified to the extent provided here. It is recognized that the design software should be effectively integrated into the existing design tools to provide compatibility and efficiency in the form of ease of use. The overview concentrates particularly on physical modeling of the design for multi-disciplinary engineering systems with a focus on multi-body dynamics simulations. SOME THOUGHTS ON COMPLEXITY MANAGEMENT THROUGH SYSTEMS THINKING M. Kudret Yurtseven, Walter Buchanan The objective in this paper is to elaborate the use of Systems Thinking in complex systems management. The theme is that systems analysts or systems engineers have a better chance of handling complexity no matter what domain they are working in. This is especially true if they are involved in complexities of socio-economic systems. In particular, the role of General Systems theory (GST) and its main trends in complexity management will be emphasized in the paper. The trends that are well known in GST are Systems Approach, System Analysis, Operations Research (OR), Systems Engineering (including Cognitive Systems Engineering), System Dynamics, System Design, Teleology, Science of Complexity, Cybernetics and Bionics. Some general remarks will be made on how complexity and complexity management are viewed in Systems Thinking and in GST. The conclusion section discusses the limitations of the study and presents some suggestions for further research work. CONCEPTS OF ENGINEERING DESIGN AND COMPLEX SYSTEMS Walter Buchanan, Ali Mehrabian, M. Kudret Yurtseven Reviewed here are efforts involved in the development process of a new course in engineering design modeling. Also covered is exploration of the major issues involved in handling complex systems in university education from a systems thinking perspective. The first effort will be a compliment to an existing senior design cap-stone project course currently offered in addition to a project management course. The three-course package will be a sequence of courses for enhancing the skill sets required in designing new engineering products and improving existing the current ones. The economical and time-saving advantages are addressed and the prerequisites are presented and discussed. Some computational tools and ÂŠ 2017 WCSEIT

April 17 - 20, 2017, GuimarĂŁes, PORTUGAL IX World Congress on Communication and Arts

resources are identified. Next is the handling of complex systems in university education from a systems thinking perspective. Different approaches to complexity concept and complexity management within the body of general systems theory and systems thinking are reviewed and concluded with suggestions to educators.

A FRAMEWORK TO ANALYZE MASSIVE DATA FROM APPLICATIONS AND SERVICES OF A METEOROLOGICAL DATA CENTER Eugênio Sper de Almeida, Ivo Koga The Center for Weather Forecasting and Climate Studies (CPTEC) produces and disseminates results from Numerical Weather Prediction (NWP) models simulations to Brazil and South America. In order to accomplish this task, its data center hosts a supercomputer and many other computational resources that receives data from many heterogeneous sources. To find and solve problems, it is important to monitor several computational resources of the data center twenty-four hours a day, seven days a week. This paper presents a framework to collect and analyze massive data from a meteorological data center. The results show the analysis of NetFlow and File Transfer Protocol (FTP) server log data, which helped the CPTEC monitoring team advance their knowledge of infrastructure usage and problems solution.

BUSINESS ALIGNMENT AND IT GOVERNANCE USING AGENT-BASED MODELING José Tomaz Business alignment and IT governance has became a key factor for enterprise success to face competitors, increasing business process changes, development of new products, outsourcing, cloud migration or mergers and acquisitions. In fact, empirical research has shown a strong link between effective IT governance and organizational performance: organizations may increase their return on IT investments by as much as 40% with the help of well-organized IT governance (Weill,2004). This paper describes an agent-based model simulation for IT governance analysis and evaluation. The model provides a characterization of a business organization (e.g. process maturity level, qualified agents, socio-technical context), IT resources and governance practices that can be used to study relationships related to governance practices, organizational goals, business risks and resource management. The agent based model simulation is implemented using Netlogo to evaluate agents performance according to each case-study and, to detect emergent behavior in response to risk events and constraints in an organization.

April 17 - 20, 2017, Guimarães, PORTUGAL IX World Congress on Communication and Arts

TECHNICAL SESSION PT1 EXPERT SYSTEM WITH OPTIMIZED DIAGNOSIS OF POWER TRANSFORMERS André Pereira Marques, Cláudio Henrique Bezerra Azevedo, José Augusto Lopes dos Santos, Leonardo da Cunha Brito, Cacilda de Jesus Ribeiro, Nicolas Kemerich de Moura, Yuri Andrade Dias, Adson S. Rocha This paper aims to present the development of the Expert System for Diagnosis of Power Transformers immersed in insulating mineral oil, which is justified as an efficient tool to help preventive maintenance teams. As an innovation of this system, we highlight the optimized diagnosis through the integration of predictive techniques, applying a new method of classifying the state of these devices, called Normally Double-Weighted Sum. In the methodology, it describes the predictive techniques integrated in this system, its functionalities and its differential in the use of the developed classification method (concepts from "A" to "E"), with their recommended actions to aid in decision making. The statistical analyzes obtained from the local electricity company's database, technical standards and experience of engineering analysts were also considered. The validation of this system was carried out through several real case studies, field tests and in laboratory, proving their applicability, with high accuracy percentages. ON IDENTIFYING PARAMETERS OF AN EPIDEMIC MODEL BY USING GENETIC ALGORITHM Deivison M. Gandini, Luiz H. A. Monteiro In this work, a genetic algorithm is used to identify the parameters of an epidemic model based on probabilistic cellular automaton (PCA). In this model, each cell of the PCA lattice corresponds to an individual of the host population. Each individual can be, at each time step, in one of three states: susceptible, infected, or recovered. The transitions among these states are driven by probabilistic rules. It is shown that different sets of parameter values (related to these probabilistic rules) can lead to similar long term-behaviors of the PCA model. It is discussed how this result affects the development of strategies to control the spread of contagious diseases.

LANGUAGE LEARNING TECHNOLOGIES: RESEARCH PERSPECTIVES José Macário de Siqueira Rocha, Claudia H. Rocha, Joni A. Amorim Different information and communication technologies have revolutionized language teaching, in particular by using strategies and solutions that include virtual environments, mobile devices, personalization of digital content delivery based on the student profile, use of analytical methods with statistical models through © 2017 WCSEIT

April 17 - 20, 2017, Guimarães, PORTUGAL IX World Congress on Communication and Arts

information systems, and so on. In this way, this research aims to contribute to the discussion regarding the use of educational technologies by listing and analyzing some of the main lines of research identified by the authors: (i) learning theories and educational computing; (ii) training for language teachers on educational technologies; (iii) mobility for language learning; (iv) learning objects in language instruction; (v) interactive digital videos; and (vi) collaborative computer assisted learning. RESEARCH PROJECTS AND CASE STUDIES OF TECHNOLOGY ASSISTED LANGUAGE LEARNING José Macário de Siqueira Rocha, Claudia H. Rocha, Joni A. Amorim This paper discusses research projects and case studies. The focus is language learning assisted by technologies: electronic learning is discussed and the CAMILLE group is presented. In the past, the group worked on the development of different tools and offered language courses. The electronic learning platform InGenio, which was developed by the CAMILLE group at the Polytechnic University of Valencia, will be highlighted in this paper. This platform was developed with the support of several European research projects in the area of computer assisted language learning. This work contributes to the understanding of several aspects, including the management and the evaluation of student learning. Other aspects to be considered are the development and the analysis of solutions for mobile devices. ANALYSIS OF COLLABORATIVE PROJECTS IN RESEARCH, DEVELOPMENT AND INNOVATION Joni A. Amorim, José Macário de Siqueira Rocha, Oswaldo Luiz Agostinho This work presents the analysis of collaborative projects in research, development and innovation. The aspects considered include: (1) "office structuring", indicating that efforts have been made to improve management through the structuring of management offices; (2) "standardized processes", indicating that explicit and consolidated processes have been observed, and may even be disseminated through training; (3) "standardized documents", indicating that already consolidated document models have been observed to monitor the use of process-related tools and techniques, thereby facilitating the collection of data that can be stored and analyzed partially or totally in information systems; (4) "information systems", indicating that computer programs were in use to support the projects, in particular for the analysis of data collected throughout the projects; and (5) "increase in maturity", indicating that there were perceived initiatives to continuously improve management processes.

April 17 - 20, 2017, Guimarães, PORTUGAL IX World Congress on Communication and Arts

EVOLUTION OF DISEASES IN THE PUBLIC HEALTH SYSTEM OF BRAZIL IN 15 YEARS OF SUS Carlos Acácio de Lima Issues of Innovation and Reliability are related to the Unified Health System (SUS) when a qualitative evaluation is made in the data of the Authorization of Hospital Hospitalization (IAH) in a period of 15 years. This article shows the results of all care given in the Brazilian health system, showing the changes, advances and setbacks of some diseases. The data evaluated are official (Reliability), made available for public consultation in a quantitative way, but not systematized to bring practical results for the evolution of the paths to be followed in the application of financial resources and the direction of preventive actions. As a result of the research and focusing on improvement (Innovation), based on the results presented, this work is available to Government Managers and interested in the health area, with some considerations of the evolution of health in Brazil as a challenge to be solved in Government Electronic. TECHNICAL SESSION PT2

INSPECTION OF FACADES USING MOBILE ROBOTICS FOR SURVEYING DAMAGE CAUSED BY COATING MORTARS DUE TO WEATHERING Paulo Henrique Cruz Pereira, Adelcio Bertoldo, Luiz Pinheiro da Guia, José Eduardo S. Gomes, Anna Paula Maldonado Pereira Mobile Robotics is an area of knowledge in development, from the point of view of equipment or construction techniques. Taking into account the technology of the materials and the constructive techniques, especially in façades of old mortars in which there are serious limitations, combined with malpractice, deterioration, weathering, and accidents, they take some constructions, considering the purposes that they proposed, to present performance Unsatisfactory. The importance of façades goes beyond the fence and contact with the environment, it acts as a form of communication between the building, owner and community. To determine the pathologies it is necessary to perform the inspection and characterization of the degradation in mortars. This work aims to show that it is possible to use mobile robotics in the context of damage assessment in mortars, to analyze, to discriminate and to search the solutions in terms of photographs and to select those that allow their use for the determination of damages.

April 17 - 20, 2017, Guimarães, PORTUGAL IX World Congress on Communication and Arts

BLOCKCHAIN IN MANUFACTURING REVOLUTION BASED ON MACHINE TO MACHINE TRANSACTION Geraldo José Dolce Uzum Martins, Rodrigo Franco Gonçalves Since Antiquity, money role is to make work a system of debit and credit. This system works only if trustable emitters exist and a vast belief that others will accept these obligations. Banks and governments usually perform both roles. With B2B, financial transactions between companies are digital. However, it is necessary a formal institution to validate and register the exchange values. In B2B, the communication was predominantly between commercial departments. Conversely, industry 4.0. includes direct link between machines (M2M). Virtual currencies introduce a concept which traditional agents are replaced by public digital ledger, called blockchain. The aim of this article is to evaluate the impacts of this technology in financial transactions. A systematic review did not identify blockchain in M2M. Since this context is not a practical reality, it is based on a literature analysis of the pertinent concepts. PROPOSAL FOR A PROTOCOL FOR THE EVALUATION OF POSTURAL CONTROL THROUGH CINEMETRY: AN ANALYSIS OF TEST "T" CONSTRUCTION AND VALIDATION OF THE TOPUS SCALE Lívia Cristina Mietherhofer de O. Lammoglia, Luiz Heleno Moreira Duque T Postural control is responsible for resisting gravity and maintaining the body's balance in motion. Cinemetry is a quantitative and qualitative method commonly used to measure and evaluate motor valences from the acquisition of motion images. The present study aimed to evaluate the angles of the T test, also known as the "inverted hamstring" exercise, and to define evaluative parameters that help in the elaboration of the therapeutic physiological diagnosis, besides the development of a classification scale of the motor test execution standard. Twenty female asymptomatic subjects, aged between 18 and 30 years, participated in this study. After the data collection, the angles were analyzed from the viewpoint of postural control. A flowchart was used as an analysis guide to evaluate each angle, the proposed classification scale for motor pattern and mobility; stability of the joints was validated experimentally then proposed whether a program of corrective

RESTRICTIVE STEREOTYPES IN THE SCOPE OF INFORMATION TECHNOLOGY Ana Flávia Resende Oliveira Honório, Elis Magalhães Santos de Freitas Information Technology has several applications, allowing the perception - in common sense - of the belief in a fixed standard regarding the professionals who work in the area. Just how they should behave, and what kind of people fit into those © 2017 WCSEIT

April 17 - 20, 2017, Guimarães, PORTUGAL IX World Congress on Communication and Arts

activities. Stereotypes can often restrict the style of people actively engaged in the Information Technology. The objective of this article is to elucidate some of these limiting stereotypes, between professionals and students from the most diverse areas of technology. And also analyze how people who are judged as outside these standards can be inserted into the IT universe. Based on the conceptions of Anaz & Ceretta, Benston and Bordieu, we will try to approach, in a qualitative way, the external look and that of people inserted in this reality regarding the thematic. INDUSTRIAL POTENTIAL POLLUTER ANALYSIS BASED ON GEOGRAPHIC INFORMATION SYSTEMS Luiz Cládio Dalmolin, Nilson Ribeiro Modro, Rafael de Medeiros Sperb Any productive activity generates environmental impact. There is a growing need and interest of society in identifying and combating pollutant emission sources and its environmental impacts. In Brazil, the on-site evaluation of pollutant emissions sources is not feasible from a practical and economical point of view. Thus, indirect verification mechanisms are needed. In this sense, this work presents an alternative to the analysis and evaluation of pollutant emission, based on GIS - Geographic Information Systems. The proposed method, developed with financial support from FAPESC, is based on thematic maps generated from secondary data and integrating existing Technologies, in order to offer a viable alternative, through geographic information systems, to a complex management of industrial pollution. ACADEMIC PRODUCTION AND THE WORLD VEHICLE PRODUCTION VOLUME. DO THE PRACTICES OF THE AUTO INDUSTRY REFLECT IN ACADEMIC STUDIES? Fabiana Giusti Serra The world auto industry always develops new techniques to increase production efficiency, quality and currently, ecological efficiency, precisely because of the high volume of production of vehicles makes possible financial gains with the use of these techniques. On the other hand, the academy produces studies of the techniques used in the world of auto industry from their knowledge. Thus, this study aims, based on a study to identify an association between the number of publications on these techniques in the major vehicle producing countries. This association was made through a bibliometric study of the research of the key words. The results show that there is a relationship between the three vehicle producing countries with the number of articles published on the keywords. And it concluded by associating the importance of the contribution of the academy in the study of the practices used in the major vehicle producing countries.

April 17 - 20, 2017, Guimarães, PORTUGAL IX World Congress on Communication and Arts

TECHNICAL SESSION PT3 EXECUTION OF DIFFERENTIAL AND INTEGRAL CALCULUS IN APPLIED ROBOTICS IN A LINE FOLLOWER ROBOT WITH PID Polyane Alves Santos, Liandra Araújo Souza, Gabriel de Oliveira Santos, Wilquer de Lima Pereira, Gessica da Silva Pereira The line follower has autonomous characteristics, because it has the assumption to follow a certain course, which is described by a line that distinguishes itself from the surface where it is located, are usually used black lines, pointing the route to be traveled. The prototype in question was developed using Arduino Nano, in which, in its programming was employed the PID algorithm, responsible for achieving better performance and greater accuracy in the execution of the curves and the speed of the robot. The controls that relate to PID were regulated through errors, in which the follower suffered oscillations when used on/off technique. Finally, the PID is more agile, in relation to other commands tested, solving the errors encountered during the prototype construction process, providing the desired results.

ROBOTIC MOVEMENTS COMBINED WITH MATHEMATICAL CALCULATIONS Polyane Alves Santos, Ítalo Santos Bonfim, Gabriela Gama da Silva This article aims to present the various applications of differential and integral calculus in a line follower robot to improve its movements. The robot was largely built by scrap metal, sensors, motors and an arduino platform. Its programming started with an on / off controller associated to the bases of calculations of the sensors and motors which was noticed sudden and imprecise movements, implying in the necessity of the use of another controller the PID (Proportional Integral Derivative) that is able to correct The errors causing oscillations in the system. With this controller it was noticed an improvement in its movements making them more precise and smooth. With these results it was possible to conclude how important the use of mathematics in robotics is, since only through it can we perfect the movements and trona-lós more precise. A SURVEY OF ALGORITHM AND TECHNIQUES FOR SECURITY AND PRIVACY PRESERVING DATA Francimaria R. S. Nascimento, Flavius L. Gorgônio, Karliane M. O. Vale Due to the increasing volume of data in enterprises and institutions in recent years, the application of techniques that increase the security and privacy of data collected and stored becomes more and more necessary, especially when such data needs to be shared, such as occurs in some domains. Despite the benefits of applying data © 2017 WCSEIT

April 17 - 20, 2017, Guimarães, PORTUGAL IX World Congress on Communication and Arts

mining methods and techniques, manipulating databases in their original form can result in ethical and legal questions because of privacy-related issues. Several algorithms and techniques have been proposed in the literature in order to reduce risks of exposure of personal data. This article presents a brief survey evaluating some of the algorithms and techniques most used to maintain the privacy and security on shared data, applied to the data in the health area context.

THE WEB 3D PLATFORM AS A TEACHING TOOL IN ENGINEERING Carlos Magno de Lima, Felipe Pinheiro Maia The new technologies of the WEB and the much-desired independence of the “plugins” have provoked a revolution in the development of educational content. In particular, the JavaScript language has become the basis for the proliferation of frameworks that make it possible to transform the WEB into a development platform in all dimensions. This development has reflected in an incredible number of applications in all fields, especially in the development of three-dimensional spaces and in the effort to consolidate the insertion of Virtual Reality Technology, an effective basis for stimulating the sensory channels responsible for content capture and retention of learning. This work aims to present the WEB Platform as an environment for the development of activities in Engineering Teaching. POTENTIAL OF THE ORIGINPRO 8 SRO V8.0724 (B724) COMPUTATIONAL TOOL IN THE GENERATION OF NONLINEAR FUNCTIONS DESCRIBING EXOTHERMIC AND ENDOTHERMIC CURVES IN A NI50TI30HF20.AT% METALLIC ALLOY WITH EMF Roniere Leite Soares, Walman Benício de Castro, José Lion Oliveira Julião, Kleanny Gama Sales de Souza This paper demonstrates 4 nonlinear regressions that it was determinate (with R2 > 0.99) in the OriginPro 8 SRO v8.0724 (B724) software from the DSC experimental result obtained from a Ni50Ti30Hf20 .at% metallic alloy with Shape Memory Effect (SME). The functions Pseudo-Voigt1 and Pseudo-Voigt2 are described in the martensite period (exothermic curve (cooling)) and in the austenite period (endothermic curve (heating)) with: parameters and respective errors (±), analysis of variance (ANOVA), Covariances, Correlations, dispersion diagrams and histograms of residues. The data analysis was done by means of graphs and tables and the statistical results were briefly discussed.

April 17 - 20, 2017, Guimarães, PORTUGAL IX World Congress on Communication and Arts

IMPACT OF THE INTERNET OF THINGS ON INDUSTRY 4.0: A SYSTEMATIC REVIEW OF LITERATURE Benedito Cristiano Aparecido Petroni, Irapuan Glória Júnior, Rodrigo Franco Gonçalves The Internet of Things (IoT) has become a recurring subject in virtually every discussion involving innovation and technology. IoT allows the existence of a wide variety of connected devices and exchanging information that, when applied to industrial production, can revolutionize production and logistics processes, composing a new production paradigm that some call Industry 4.0 (Ind4.0). This type of industry still requires the adoption of business models to be understood and transformed into industrial practice in conjunction with existing and future CyberPhysical Systems (CPS). In this context, this article aims to present a systematic review of the articles related to the analysis of impacts, forms of risks and benefits of IoT in Ind4.0 and CPS, in contexts involving society, economy, work and business.

COMPUTATIONAL THINKING, EDUCATIONAL ROBOTICS, AND SIGNIFICANT LEARNING: THE COMPETENCY OF THE INVISIBLE SUBJECT Elcio Schuhmacher, Vera Rejane Niedersberg Schuhmacher The article reports the development of a methodological proposal based on the assumptions of meaningful learning. The proposal shows a strategy for the teaching of Computational Thinking with high school students in a contextualized way, incorporating educational robotics within a flexible scenario, as well as the discussion of technological and scientific concepts in an attractive and playful way. The progress of the computational project required the students to organize thinking, problem solving, research and the development of analytical skills necessary for the construction of a sensor-controlled object. The results show students' interest in discussing scientific concepts, and Computational Thinking was used to motivate science teaching. Collaborative and interaction skills among students were developed, as well as the assimilation of curricular concepts from the use of robotics in pedagogical practice.

USE OF CAD AND CAM TECHNOLOGIES IN THE DESIGN, MODELING AND PRODUCTION PROCESS OF A MECHANICAL AND BIONICS PROSTHESIS OF THE UPPER LIMB EXTREMITY Bruno Borges da Silva, Luiz Antonio Vasques Hellmeister, Rodolfo Nucci Porsani, André Luiz Alves Guimarães The aim of this work was to use the CAD (Computer Aided Design) and CAM (Computer Aided Manufacturing) technologies in the design, modeling and production process of a mechanical and bionic prosthesis of a hand in order to © 2017 WCSEIT

April 17 - 20, 2017, Guimarães, PORTUGAL IX World Congress on Communication and Arts

provide assistance, rehabilitation and improve the quality of life of persons with disabilities belonging to the less economically disadvantaged sections of the population. Previously developed works such as the construction of a CNC machine (Computer Numeric Control) and a 3D printer, Graber model, were fundamental to the realization of this project. The overlapping layers of thermoplastic filaments form the components of the prostheses such as the fingers and the stump-supporting part (the amputated part), which in turn is used to move the mechanical tendons of the prosthesis or in the case of the bionic prosthesis, Electromyographic signals

APLICATION OF AIDED TECHNOLOGY ON THE DEVELOPMENT OF AN EXTRUDER MACHINE TO PRODUCE 3D PRINTER RECYCLED FILAMENT Gabriel Seolin Jurisato, Luiz Antonio Vasques Hellmeister, Augusto Seolin Jurisato, Rodolfo Nucci Porsani The ascending popularization of the 3D printers uses in rapid prototyping processes reveals that the main cost of the raw material is very high. To face this aspect, this work aimed to apply the aided technology in the design, modeling and construction of an extruder for the filament production from recycled materials such as polyethylene terephthalate (PET), polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS). By using simple and accessible equipment, a device controlled by ARDUINO was built, which transforms the raw material into filaments, following the molds and standards available in the market. In order to ascertain the quality of the recycled filament compared to the industrialized filaments, tensile tests are carried out on specimens printed on a printer, and it was concluded that recycling of materials for the production of inexpensive filaments is fully feasible.

ÂŠ 2017 WCSEIT

April 17 - 20, 2017, GuimarĂŁes, PORTUGAL IX World Congress on Communication and Arts

ORGANIZATION

PROMOTED BY

TECHNICAL COOPERATION

SUPPORTED BY

HOST ISBN 978-85-65992-78-7

9 788565 992787

Efﬁcient Engineering of Complex Systems and Information Technology: a Symbiotic Relationship