Selected Work
P O R T F 2017 - 2019 Po Cheng
O L I O
Design is better imagination of life. 設計存在於生活中美好的印象
Po-Cheng Chen 陳柏成
4
Education 2016 -
National Cheng Kung University Industrial Design Department Bachelor
Experience NCKU Industrial Design Department Graduation Exhibition ID week ID Student Association Movie Department Emotional Design Workshop
Vice Coordinator Coordinator Leader Staff
Skill Film Production
Script/Storyboard Camera/Lighting Editor
Product Design
Adobe Premiere
Final Cut Pro
Design Process Concept Sketch
Autodesk Sketchbook
3D Modeling
Solidworks
Prototyping
Physical Modeling 3D Printing
Layout
Photoshop
Keyshot
illustrator
inDesign
Adobe XD
Hobby Movie
Lomography
Travel
5
CONTENT
6
Electric Fan
- Lean Product Design
酒家菜逼八
- Board Game : Promotion of Taiwanese classic cuisine
Trash Tong Swan
- Ergonomic Hand Tool Design
- series of bionic imagery model artwork
Sketch Filming / Photography
1
NCKU ID End of Term Exhibition Teaser
2
Sibling
3
Lomography
- Micro Film
7
ELECTRIC FAN
- Lean Product Design
Design Feature 55cm laps of wind vortexes 1/2 Distance of measurement 1m (Average distance statis from user to electric fan)
121.4cm laps of wind vortexes 1/3
o
1
Refinement of Wind Vortex & Column of Wind
Coanda Effect The Coanda Effect is the tendency of a fluid jet to stay attached to a convex surface. It's applied to the deflector on the front cover to enlarge the volumn of wind when the wind pass through shape of concentric circle from layers
10 -Electric Fan
o
2
Noise reduction of front cover
To reduce wind-cut noise from front shell, we take the Chevron design of turbojet on Airbus as reference. Round sawtooth is applied to deflector on front shell. Enhance amount of air flows through the both sides of deflector to reduce wind-cut noise
o
3
Stepped-control pad
The alignment of buttons on control pad is designed for foot-stepped operation. Stand-using is common way to operate the electric fan in lot's of responses from the user we've interviewed during the Contextual Inquiry.
11
Research Contextual Inquiry
A Contextual Inquiry interview is usually structured one-on-one interaction in which the researcher watches the user in the course of the user's normal activities and discusses those activities with the user.
Opp score After the inquisition, we conducted a survey of people's attitudes toward electric fan purchase and using activities. Each question will take two part of scoring answers "Impor tance" and "Satisfaction". The X-axis is figured as score of importance(I), as Y-axis means satisfaction(S).
Satisfaction
10 8 6 4 2 0 0
2
4
6
8
10
Importance
Opp Score Formula Opp =
2I - S
The Opp score calculated by the formula would be divided into 3 parts as shown in the chart above. The darkest zone in the chart means "the most important thing but not satisfied to customer" , which would be the target problem for our team to deal with first.
Design Goal - Making the wind feel more similar to wind that comes from nature - Simplier operation control pad - Prevention of wind-cut noise
12 -Electric Fan
A3 report 產品規劃A3報告書
四、產品策略
產品型號：CHIMEI DF-14D500 組員：許祐庭 陳柏成 黃婉瑜
企劃名稱：奇美立扇精實產品開發企劃
編號 客戶價值 競品分析
一、市場背景 市場：奇美2012年DC風扇， 銷售1.6萬台， 有30%以上市佔率(資料來源：工商時報)，而我們下一代的目標為35% 客群：具環保意識， 注重生活品質， 願意花錢購買品質較優良的家電產品， 這些消費者特質符合DC節能扇特色
二、顧客分析
(294份問卷中， 有效問卷數：52份) 噪音
A
風扇運轉聲音不擾人
12.8
B
控制面板能夠輕鬆快速地調整到想要的模式
12.7
C
風向角度調整方便快速
11.5
D
組裝完成風扇零件穩固
10.9
E
風扇能幫助室內與室外的空氣對流
F
容易判斷前殼是否正確卡接
G
風扇的高低好調整
10.7
H
風扇最大風量舒適涼爽
10.5
風量舒適
I
異物絕不卡入風扇
10.0
異物進入
J
電扇站立穩固安全
10.0
消耗 ECO 分離式 腳踏 電源線 多種 遙控 定時 底座 開關 收納 風種 功率
405*420 26W *1015
v
v
Panasonic F-L14DMD
400*420 22W *1100
v
v
SAMPO SK-FL14DR
405*450 22W *1010
v
SAMPO SK-FX14DR
405*450 22W *1035
415*370 30W *1120
結論
v
v
v
v
v
v
音階響鈴 我的最愛
v
v
v
v
LED亮度/顯示段數 操作音/記憶關機風量 無段式高低調整
v v
飛梭旋鈕/LED顯示段數 操作音/記憶關機前風量 無段式高低調整
v
v
v
v
v
v
v
v
提升介面操作便利性(需求B滿意度低於競品平均)
v
電動擺頭調整方便快速(需求F,G)) 好收納 高低調整方便快速(需求E) 提升零件穩固性(需求I/滿意度低於競品平均)
10.8
對流
9
v
10.7
穩固性
防止灰塵卡入的機能(需求C/且沒有競品主打)
五、目標功能/性能 目標功能/性能
策略
CHIMEI DF14D500 其他競品
滿意度平均
3.0
v
v
v
4.0
v
v
5
v
5.0
音階響鈴/我的最愛 Turbo循環扇網
4
降低噪音(需求A)
8
1
更接近自然風感
2
簡約造型
3
最大風量噪音維持
4
操作時間縮短
5
增加機構轉動、調整高度順暢度
6
收納過程簡化
7
運轉時零件不搖晃
8
減少積塵量
六、知識缺口
1.0
策略
判斷正確組裝
HERAN HDF-14C3
v
v
外觀(風扇市場現況)
操作便利性
零件穩固
405*420 *1015 22W
v
v
v
v
v
v
主打特點
v
v
3
v
高度好調整
TECO 405*420 22W XA1476BRD * 965 TECO XA1488BR
v v
v
v
風量舒適
2
v
快速調整模式
405*420 TECO 22W XA1468BRD *1015
v
v
7
滿意度評分
CHIMEI DF14D500
v
6
三、競爭者分析 長*寬* 高(mm)
策略
1
知識缺口
1
風切聲形成原因
2
研究零件結合方法以及其穩固性排序 了解零件材質對穩固性的影響
3
研究面板操作流程的最大困難點(心情低谷)是什麼
4
了解灰塵如何附著電扇
七、初步開發計畫
v
以主體分析表格來看，市場競爭項目為節電、面板、個人化、節省空間、風類、遙控、定時。 以客體分析折線圖來看，在12項未滿足的顧客價值中，奇美在這四項顧客價值的滿意度低於平均表現。
10月補足所有知識缺口
11月概念設計
12月草模實驗
Formalization and integration is emphasized in lean product development process. All of the research process would be compiled and consolidated in this A3 report including market survey, customer inquiry, competitor analysis, goal of product development, target performance, lack of project understanding and initial development planning.
Casualty map 中柱半徑
中柱材質
高
中柱底盤接 合處結實度
擺頭速度
高低調整 處結實度
穩固性
組裝方式
重心高低
高低調整 耗力大小
頭部重量
小
組裝時間
組裝難易度
馬達 轉速
扇葉上 灰塵量
電線 電阻 室內 溫度
噪音
扇網 深度
扇葉數 小
馬達 溫度
馬達 出功率
風濕度
扇葉 材質 扇葉 形狀
風速 出風 夾角
按鍵 壽命
擺頭最 大角度
介面 大小
扇網 密度
靜電 大小
風量
風溫
體表風 乾速度
扇葉 面積
葉片 角度
按鍵 大小 灰塵累 清潔頻率 積速度
扇網 形狀
按鍵 間距
按鍵 數目
功能 數目
快
機器反 應時間
大小
icon
判讀 時間
操作消 耗時間
操作正確率
高
操作 方式
介面 位置
操作 步驟數
icon
樣式
icon
空氣微 粒量
受風 面積
快
室內 溼度
底座 大小
體積
葉片 寬度
調整處 位置
中柱 長度
收納空間大小
零件數 葉片表面 曲率 葉片 厚度
電動擺頭 調整時長
試錯次數
小
快
體表冷 卻速度
人與扇 的距離
We recorded each part of electronic fan and sorted them according to product development goal of the A3 report.
13
Ideate Moodboard
Based on Market Positioning, the target user prefers japanese brands with a style called "Zen" such as MUJI and Plus Minsu 0 when they purchase home appliance. We formulated the moodboard of Zen style. Geometric appearance, low color saturation are features just like those japanese brands.
14 -Electric Fan
Sketch
Tech of Noise Reduction We did online research to find out where the wind-cut noise come from when we operate it. Basically it comes from the following three parts: motor, fan blade and front shell. It requires to trade off between front shell wind-volumn enlargement design and wind-cut noise. We were inspired by the chevron design on turbine of Airbus due to the noise descending function.
15
Test 3D-modeling Test Wind Vortex & Column of Wind
In lean product development, the experimental analysis is required to be compared in quantification. We made a series of 3D modeling flow simulation in Solidworks rather than making rough model in order to decline the distortion of experiment outcome.
All over forty different condition selected have been tested.
16 -Electric Fan
Stepped-Control Pad Test
The Stepped-Control Pad was conducted with a panel showed different kinds of button alignment. We assigned several tasks to our subjects then recorded the fault rate of operation and duration doing eash task.
風 風 風 般 然 一 自
眠
時 2小 時 1小 時
風類
eco
4小
睡
預約開
1小 2小 4小 時 時 時
擺頭
定時關
17
Photoshooting
18 -Electric Fan
19
酒家菜逼八
- Taiwanese classic cuisine promotion with a board game
Cultural Investigate Living in Tainan, an antique city in southern Taiwan, our lives are surrounded by plenty of Taiwanese classic food culture such as beef soup, dried noodle, rice tude pudding etc. We chose a type of traditional Taiwanese gourmet called "Jiou Jia Tsai" as our theme of this project. At the beginning, team members head to one of the most representative Jiou Jia Tsai restaurant in Tainan named A-mei to investigate the cuisine and make an access to the staff and the 3rd generation boss of Amei.
店門口
22 - 酒家菜逼八
During the interview with the boss, we learned these Jiou Jia Tsai cuisine had been offered deliver service for several years already. We also found the composition of customers in Amei restaurant were elder mostly. The boss said the younger generation didn't enjoy the flavor of Jiou Jia Tsai cuisine as it was just suitable for elder people because the taste of sour and sweet in Jiou Jia Tsai dishes.
"How might we let the customer realize what a exquisite and special culture it is in a amusing way" Recipe
Gradient
History
Participant
Visual
We started to think why don't we let users experience what we saw in Jiou Jia Tsai culture. Soon we associated the home-deliver box and board game together. In home-deliver scenario, users have to wait the cuisine defrost for at least 3 hours. It seems that exists a spare time while they're waiting.
Design Goal Making customer be more interested in Jiou Jia Tsai culture through the homedeliver service box when they wait for the thaw out of their food.
23
Design Process Texture selecting
Set-up of Gaming Our team did some literature review through newspapers and web articles about 30-50s in Taiwan before we get started to design the board game. For example, the game rule is referred to the events really happened in those years.
Gaming Demo
24 - 酒家菜逼八
Visual Reference
25
Illustrating
Recipe
Collecting all 7 kinds of cuisine including appetizer, soup, fry, entree, dessert and fruit will be the winner.
Character Each character has different skill like "gain a bonus coin after finishing a loop" is Boss one.
Coin For purchasing more recipe
26 - 酒家菜逼八
Compass Players could get their own chopsticks as the pointer. Put on the center and toss it, then see how far he/she can move in his/ her turn.
2
2
点
学 着 点
3
5 3
点
一
十五
二
向任一玩家收取1胃力
虹 彩霓 中央
轉
七 灯 。可
西 北
四 找一好轉物品当做指針 於此处旋轉
次
風 轉 。可
五 放棄手上的1个食譜 或2胃力
六
3
3
黑道在店中火拼,拼完大家 都餓了。菜譜被撕了
应 点
5 点 2
誠
心
则
点
3
点
灵
灵
件 轉
3
不
命 事轉
地
运 玲珑
叫
盘乙
点
叫
央
命 轉
点
必
2 点
天
运 珑玲 中轉
。 可 次
点
不
求
有
2 点
2
应 3
点
东 北
2 点
总破师醋加太多，失去味覺 ，母汤判断正确的好味道
5
3
錢包忘在家,无錢付餐費,和 好朋友借錢
三
九
八
倒退3格
2 点
点
点
点
件 事 圈為 ，外 步數 內圈為
十
七
3
点
临时需購买珍貴食材， 店家今天要睡到自然醒 不做生意
5
点
2 点
十一
5
事 轉 次
点
2
2
3
七 灯件
十二
胃力+1
点
点
点
宝美楼老师傅 失传秘笈
胃力+2
2
点 点
酒家 菜逼八
3
5
輪流 水
轉
点
十三
事 轉
盘乙
流 水輪 中央
点
点
四 十
霓虹 彩 盘乙
風 轉件
东 南
过此地可补充两胃力
早餐不小心喝到大冰奶，肠 胃清洁溜溜 3
点 5
点
西 南
Map Start at the center-above square, pass through whole map clockwise and try to gain recipe as much as you can.
27
Prototyping
28 - 酒家菜逼八
29
Trash Tong - Ergonomic Hand Tool Design
"Trash tong using hazard reduction in Ergonomic"
Research
We made a research at the cleaning unit in East District Tainan. The administrator of the unit let us follow his crew, Kai, when he's on duty.
32
- Trash Tong
Our team tried to do the clean job with Kai to understand what kinds of problem cleaners need to deal with but may be unconcious about it. Then we went through the route with Kai assigned by the administrator that day.
33
Problem Define
radial flexion
flexion
Motion analysis in Ergo guideline
ulnar flexion
extension
After trash-tong using inquiry about routing job of the cleaning squad, we carried on the motion analysis according to the documentary we took with Kai.
34
- Trash Tong
Solution
maintain a straight wrist
enlarge contact surface of grip
maximum grip forces
Maximum strength efficency by grip axis opening 2.5 - 4.5 inches
grip axis opening
35
Prototype 1st generation
Unstable structure Material weakness
2nd generation
Palm contact surface enlarge Bending tong Wrist deviate prevention
CG backward Wrist deviate prevention
36
- Trash Tong
3rd generation
- Extralight clay Palm contact surface enlarge Lighten material (Reduce research varience)
- Lead added Wrist deviate prevention Precisely CG backward W=FxS 304*(57/2)=96*(18/2)+195*(18+x) X=22
- Always-open bag Wrist deviate prevention
37
Test Research Plan Research Setting
Testing process Introducution
Field Experimental Research Research variables IV: trash tong design DV: Task/Wrist comfort
38
- Trash Tong
Trash picking up testing Doing questionnaire Finish
Interview
Result
According to the questionnaire response and motion analysis data, our team used Paired sample T-test to figure out whether it gets much better performance than original one or not.
- Extralight clay
Best Performance
Picking up trash
p value=0.02
Holding usually
p value=0.01
- Lead added Picking up trash
Lower average *Weight added too much.
Holding usually
Higher average
- Always-open bag Higher average, but no significant differences.
39
Swan
- series of bionic imagery model artwork
Big Buddy
Clay Model
-Gradient Skelenton: Alumnimum wire, Modeling clay Ocean: Putty, Acrylic, Silicon
42
- Swan
Zhi
Pen Holder
-Gradient Acrylic, Poly
43
Sketch
- selected work
46
- Sketch
47
48 48
- Sketch
49
Filming / Photography
NCKU ID End of Term Exhibition 1o Teaser Film - motion between light and shadow in daily life or created work - Camera
52
- Filming
53
NCKU ID End of Term Exhibition 2o Teaser Film work - Camera / Lighting
54 54
- Filming
- Brightness and rhythm of light - Relevance between exhibition them and designing
Sibling Micro Film
兄妹
- Thriller / Suspence
work - Director Co-Spectator
55
Lomography - Impressive color in Tainan
56
- Photography
57
Contact i930210@gmail.com +886978087336
58