Base Cabinet Options by Craft Maid Cabinetry

Base Options

Base Options Index A Additional Shelves .........................................................H-57 Add Open Section ...........................................................H-15 Adjustable Wood Inserts (For Drawers) .................H-49 Angled Wing Base ..........................................................H-30 Applied Base Board ...........................................H-16–H-28 Attach Center Stile to Door .........................H-32–H-34

B Base Angled Cabinets ...........................................H-5–H-6 Base Cabinet with 3" Clipped Corner(s) .................H-39 Base Cabinet with 3" Clipped Corner(s) and Flutes ...................................................................H-40 Base Corner Fillers ........................................................H-38 Base End Panel ...............................................................H-38 Base Filler - No Toe ........................................................H-37 Base Filler - With Toe ....................................................H-37 Base Filler with Full Return ..........................................H-31 Bi-folding Doors ..............................................................H-54 Bread Lid ..........................................................................H-62

Double Pull-Out Waste Basket ...................................H-42 Drawer in Toe Kick ..........................................................H-54 Drawer Pot Lid Storage Dowel Inserts .....................H-57

E Extend Cabinet End Up ................................................H-36 Extended Stile ................................................................H-30 Extend Sides Back ........................................................H-30 Extend Stiles and Rail Down .......................................H-15 Extend Top Rail Up ........................................................H-36

F Finish Back ..........................................................................H-7 Fruit or Vegetable Bin ...................................................H-59

G G-Unit ...............................................................................H-46

H Half Circle Base Unit .....................................................H-29 Hanging File Holder .......................................................H-58

I Integral Stile ...................................................................H-30 Inverted Frame ..................................................................H-4

Knife Block in Drawer ....................................................H-54

Casters ..............................................................................H-31 CD/ DVD/ VHS Media Storage .......................H-60–H-61 Chopping Block in Drawer .............................................H-52 Clear Glass Drawer Front ...........................................H-58 Corner Dimensions for Base Cabinets ....................H-67 Custom Silverware Cloth Liner ...................................H-53 Cut-Down Drawer Box ...................................................H-52 Cutlery Divider .....................................................H-49–H-51 Double - Wood ..............................................................H-49 Double Tier ......................................................................H-51 Double Tier - Wood ......................................................H-50 Moulded Polystyrene ...................................................H-51 Cutting Board Behind Door ........................................H-48 Cutting Board in Top Rail ............................................H-48

D Door on Cabinet End ........................................................H-4 Double Beaded Exposed End ......................................H-35

Lattice Style Wine Rack ................................................H-41 Lazy Susan - Wooden ...................................................H-63 Leg Levelers .....................................................................H-34

O Open Bottle Display .......................................................H-41

P Peninsula Base Cabinets .................................................H-7 Pipe Chase ..........................................................................H-4 Plate Holder ........................................................H-55–H-56 Stacking ........................................................................H-56 Vertical ...........................................................................H-55 Pocket Doors ....................................................................H-47 Pull-Out Bottle Storage ..............................................H-43

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-1

C R A F T - M A I D Pull-Out Ironing Board ..................................................H-46 Pull-Out Keyboard Drawer ...........................................H-52 Pull-Out Towel Bar Unit ................................................H-45 Pull-Out TV Swivel Unit ..................................................H-47 Pull-Out Waste Basket .................................................H-42 Pullouts - Solid Maple ...................................................H-44 Pullout with Doweled Front ..........................................H-44

Q Quarter Circle Base Unit .............................................H-29

R Radiator Cover ................................................................H-59 Radiator Grill ..................................................................H-59 Raisable Mixer Shelf .....................................................H-48 Recess Cabinet Side In ................................................H-35 Reduce Stile Width .........................................................H-31 Return Ends ....................................................................H-29

S Sink Drawer .....................................................................H-66 Skeleton Fronts .............................................................H-29 Spice Drawer ..........................................................H-51,H-52 Standard Silverware Drawer Trays ..........................H-53 Step Stool .......................................................................H-46 Swing-Out / Slide Out Shelves - Wood ....................H-63

T Thick Shelves ....................................................................H-57 Tilt-Down Soap Tray ......................................................H-48 Toe Kick Options ....................................................H-9–H-14 Towel Bar ..........................................................................H-62 Tray Dividers ....................................................................H-58

W Wainscoting Panel .............................................................H-8 Warming Drawer Cut Out ............................................H-46 Wide Integral Bottom Rail ..........................................H-36 Willow Basket ..................................................................H-35 Wire Pullouts ....................................................................H-43

Z Zero Filler - Base ...........................................................H-38

H-2

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options BASE CABINET OPTIONS Butt Doors Ordering Code: BUTT Butt doors are available at no additional cost. Center stile is omitted. Must specify on order. Finished Sides Price: $43 Add for exposed ends Stain & Seal Ends Standard unfinished cabinet end with no extraordinary material selection or sanding. End will be STAINED (same as cabinetry) with a SEALER top coat. This will serve as a protector against moisture. Code: SLS Price: N/C (Stain & seal left end) Code: SRS Price: N/C (Stain & seal right end) Base Coat (Paint)Ends Similar to above (for painted kitchen orders) but with the PAINT BASE COAT applied. We will not do any glazing,distressing or other finish options. Code: PLS Price: N/C (Base coat applied to left end) Code: PRS Price: N/C (Base coat applied to right end) Non Standard Cabinet Widths Ordering Code: SW Use price of next largest cabinet. Reduce Depth Ordering Code: RD Price: N/C Any standard base cabinet may be reduced in depth. Reduce Height - Base Ordering Code: RH Price: N/C Any standard base cabinet may be reduced in height. Increase Depth - Base Code: IDB27 - up to 27" add 15% Code: IDB30 - up to 30" add 20% Code: IDB36 - up to 36" add 25%

Increase Height - Base Code: IHB42-up to 42" add 15% Code: IHB48-up to 48" add 25% Code: IHB60-up to 60" add 50% (over 60" high = taller price) Additional Door - Base Ordering Code: ADB Price: $201 plus additional door premium. Added to any standard base cabinet. Additional Drawer Ordering Code: ADWR Price: $228 plus additional drawer premium. Added to any standard base cabinet. Drawer front only: Code: DFO Price: $113 plus premiums Drawer box only: Code:DBO Price: $169 (includes slides) Stain Drawer Box Or Pullout (Maple) Ordering Code: SDP Price: $54 per drawer Partition Ordering Code: PAR Price: $104 Fixed partition inside any base cabinet. Supply sketch with dimensions. Joining Cabinets Ordering Code: JC Price: $166 per joint For joining two or more units together at factory. Each unit is built separately and then joined. Overall width cannot exceed 84". Cabinet Built as One Unit Ordering Code: CBO All vertical stiles will be 1 1/2" wide, unless otherwise specified. Up to 48" wide - Price of the combined cabinets plus $166. Ordering Code: CBOS Over 48" wide (up to 84" wide maximum) - price of combined cabinets plus 25%

Stained Interior Ordering Code: SI Price: $158 Available for any base cabinet. Painted Interior Ordering Code: PI Price: $316 Available for any base cabinet. Interior will be painted to match exterior paint. Matching Wood Interior Ordering Code: MWI Price: Add 15% to the price of base cabinet specified. Exterior wood species replaces standard maple interior. Islands Built as One Unit Available in any size (with common stiles) that is practical. Design Alert: When designing any large unit, you need to consider Weight - Large units can be extremely heavy. The dealer must provide adequate help to carry these units. Overall Size - The unit must fit through doorways, hallways, up stairs, around corners and elevators. Send scale drawing with all dimensions for Factory Quote.

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-3

C R A F T - M A I D

Door as Cabinet End - Base Traditional & Traditional Plus only

Door replaces cabinet side. Does not add to width of cabinet. Specify which end receives door. Ordering Code: DAEB Price: $374 plus additional door premium.

Door and Frame on Cabinet End - Base Traditional & Traditional Plus only

Door and frame in place of standard cabinet side. Specify working door or fixed door. If working, indicate hinge side. Ordering Code: DFOEB Price: $396 plus additional door premiums. Optional Toe Kick

Front

Door on Cabinet End - Base European only

Fixed door applied to cabinet end. Adds 3/4" to width of cabinet. Specify which end receives door.

Pipe Chase Specify all dimensions and furnish a sketch.

Ordering Code: DOEB Price: $201 plus additional door premiums.

Ordering Code: PC Price: $219

Optional Toe Kick

Front

Inverted Frame Base cabinet with face inverted, drawer(s) below, door(s) above. Fixed floor above drawer. Ordering Code: IF Price: $104

24" Wide shown NOTE: Working drawers will be reduced in depth.

H-4

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Base Angled Cabinets Base Angled Blind

Supply sketch with all dimensions. If door is hinged on side with an angle less than 90º a wide integral frame stile will be needed if using concealed hinge. Code: BANGAB Price: Add $416 to price of cabinet specified.

Base Angled Front

Supply sketch with all dimensions. If door is hinged on side with an angle less than 90º a wide integral frame stile will be needed if using concealed hinge.

Skirt behind doors to hide drawer

Code: BANGAF Price: Add $1129 to price of cabinet specified. (Must measure cabinet across back to determine cabinet specified)

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-5

C R A F T - M A I D

Base Angled Cabinets Base Tapered Back

Supply sketch with all dimensions. 90

Code: BANGTB Price: Add $416 to price of cabinet specified.

Base Tapered Front

Supply sketch with all dimensions. If door is hinged on side with an angle less than 90º a wide integral frame stile will be needed if using concealed hinge. Code: BANGTF Price: Add $531 to price of cabinet specified.

Base Angled Corner

Supply sketch with all dimensions. Code: BANGCOR Price: Add $416 to price of cabinet specified.

Finished

H-6

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Finish Back - Plain

Peninsula Base Cabinets

Plain finished back (1/2" thick) Cabinet depth is 24" deep o. a.

Any standard Base Cabinet may be used as a peninsula base cabinet. If finished side is ordered, specify which face has operating drawer(s). Can also be ordered with doors/ drawers on one side and full height doors on the other side. A drawer skirt will be used when necessary.

Width Up to 12" 13" to 24" 25" to 36" 37" to 48" 49" to 60" 61" to 72"

Code FB12 FB24 FB36 FB48 FB60 FB72

Price $117 $147 $177 $205 $308 $338

Ordering Code: PCAB Price: Add 50% to cost of base cabinet specified.

Plain Finished Back Side View

Finish Back - Double Beaded (on 3" Centers)

Price includes finished back and double beading. Material will be MDF for uniformity of color. (1/2" thick) Cabinet depth is 24" o.a. Width Up to 12" 13" to 24" 25" to 36" 37" to 48" 49" to 60" 61" to 72"

Code DBFBB12 DBFBB24 DBFBB36 DBFBB48 DBFBB60 DBFBB72

Price $15 8 $228 $298 $367 $510 $581

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

34 ½"

24"

H-7

C R A F T - M A I D

Wainscoting Panel Loose doors for application at job site (3/4") thick) Any door over 24" wide or 48" high is charged 2 door premiums. Submit sketch with all Dimensions Maximum size: 96" wide x 42" high Or 42" wide x 96" high Larger sizes require Factory Quote Ordering code: WCP Price: $.47 per square inch plus Additional door premiums.

For Arched Wainscot Panels-Contact Factory For Quote Door and Frame Wainscoting Panel Doors splined in frame Any door over 24" wide or 48" high is charged 2 Door Style Premiums Submit sketch with all dimensions. Specify:

• Number of Frame Openings • Height of Bottom Rail • Finished Edges • Overall Size (Width and Height)

Maximum size: 96" Wide x 42" High or 42" Wide x 96" High Larger sizes require Factory Quote Ordering Code: DFWCP Price: $.62 per square inch, plus additional door premiums. For Arched Wainscot PanelsContact Factory For Quote

3/4"

H-8

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options Flush Toe Ordering Code: FTOE Price: $104

Recessed Toe Kick

Delete Toe Kick

On sides or back of cabinet. Specify left, right or back.

Decreases overall cabinet height by 4"

Ordering Code: RTOE Price: $104 each

Shown with recessed toe kick on right

Ordering Code: DTOE Price: $104

Delete Toe Kick

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-9

C R A F T - M A I D Flush Toe with Cutout Flush toe cut-out is cut into the flush toe. Recessed toe behind cutout is standard. The recessed toe behind cutout is not finished, but enough finished toe kick material will be supplied. NOTE: If cutout is in a narrow width cabinet, toe kick material will need to be installed before cabinet is set in place, or you have the option to have the recessed toe face finished at the factory. See below. Ordering Code: See individual drawings for code #. Price: $261 Includes flush toe with cutout. Recessed toe behind cutout finished at factory. Ordering Code: FRTF Price: $98

H-10

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options Flush Toe with Cutout Flush toe cut-out is cut into the flush toe. Recessed toe behind cutout is standard. The recessed toe behind cutout is not finished, but enough finished toe kick material will be supplied. NOTE: If cutout is in a narrow width cabinet, toe kick material will need to be installed before cabinet is set in place, or you have the option to have the recessed toe face finished at the factory. See below. Ordering Code: See individual drawings for code #. Price: $261 Includes flush toe with cutout. Recessed toe behind cutout finished at factory. Ordering Code: FRTF Price: $98

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-11

H-12

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-13

H-14

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options Extend Stiles and Rail Down - Base

Extend Stile Down - Base

Stiles are extended down with no toe cut notch. Bottom rail is extended down 1/2" for attaching furniture baseboard.

Stile is extended down on specific end and no toe cut notch is made. (Specify left or right stile extended down) Designed to have baseboard wrap around stile and return into recessed toe area.

Code: ESRDB Price: $104

Code: ESDB Price: $58 per stile *Flush Inside Side in Toe Area You may order a finished flush return back to the face of the recessed toe. CODE: FSTK Price: $52 per side

1 1/2"

Base - Add Open Section Specify width and height of open section. Includes extra floor, matching wood and finish to match exterior. Does not add to overall height of cabinet. Ordering Code: BOS Price: Add 30% to cabinet specified.

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-15

C R A F T - M A I D Applied Base Board Applied to any standard base cabinet. See below for cutout options. Ordering Code: See individual drawings for code. Colonial, Beaded and Traditional applied base board are $34 per linear foot + $157 (C0DE = CC##) per cutout + $35 for each miter. (Code = BMIT) Colonial base shown in drawings.

H-16

{

CODE = CBBA (Colonial) CODE = BBBA (Beaded) CODE = TBBA (Traditional)

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Applied Base Board Applied to any standard base cabinet. See below for cutout options. Ordering Code: See individual drawings for code. Colonial, Beaded and Traditional applied base board are $34 per linear foot + $157 (C0DE = CC##) per cutout + $35 for each miter. (Code = BMIT) Colonial base shown in drawings.

{

CODE = CBBA (Colonial) CODE = BBBA (Beaded) CODE = TBBA (Traditional)

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-17

C R A F T - M A I D

H-18

{

CODE = CBBA (Colonial) CODE = BBBA (Beaded) CODE = TBBA (Traditional)

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

{

CODE = CBBA (Colonial) CODE = BBBA (Beaded) CODE = TBBA (Traditional)

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-19

C R A F T - M A I D

H-20

{

CODE = CBBA (Colonial) CODE = BBBA (Beaded) CODE = TBBA (Traditional)

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

{

CODE = CBBA (Colonial) CODE = BBBA (Beaded) CODE = TBBA (Traditional)

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-21

C R A F T - M A I D

H-22

{

CODE = CBBA (Colonial) CODE = BBBA (Beaded) CODE = TBBA (Traditional)

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Applied Base Board Applied to any standard base cabinet. See below for cutout options. Ordering Code: See individual drawings for code. Coventry applied base board Traditional series are $70 per linear foot (CODE = CVBBAT) + $275 per cutout (CODE = CCC##) + $35 for each miter (CODE = BMIT) (2 moldings + 2 miters per corner). Coventry applied base board European series are $60 per linear foot (CODE = CVBBAE) + $275 per cutout (CODE = CCC##) + $35 for each miter (CODE = BMIT) (1 molding + 1 miter per corner).

CODE = CVBBAE + CCC52 + BMIT

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-23

C R A F T - M A I D

H-24

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-25

C R A F T - M A I D

H-26

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-27

C R A F T - M A I D

H-28

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Skeleton Fronts

Quarter Circle Base Unit Height 34 1/2", Width 12" Depth 24" 3/4" Construction

Available for all standard Base Cabinets . Specify with or without a toe kick. European series will have 3/4" thick returns 3" deep.

Specify left or right. Ordering Code: QCB Price: $670

Ordering Code: SF Price: Cost is 50% of the base cabinet specified. Plus door - drawer premium(s).

12"

24"

34½"

Finished back. Ordering Code: FBQCB Price: $53

Half Circle Base Unit Height 34½", Width 12" Depth 24" 3/4" Construction

Ordering Code: HCB Price: $559 "

33" Wide shown

Widths from 21' to 48". 1/2" x 21" deep. For use with skeleton fronts. Width Code Price 21" SFF21 $138 24" SFF24 $147 27" SFF27 $158 30" SFF30 $165 33" SFF33 $174 36" SFF36 $189 39" SFF39 $196 42" SFF42 $205 45" SFF45 $216 48" SFF48 $223 Double price for corner installation.

Right shown

Skeleton Front Floors

12"

Return Ends Can be attached to skeleton fronts, Specify left or right.

34 1/2"

Ordering Code: BREND Price: $166 each

Finished back. Ordering Code: FBHCB Price: $53

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-29

C R A F T - M A I D

Extended Stile

Integral Stile

Attached to cabinet. Specify width (up to 4" wide). Extend stiles over 4", double the price.

Does not add to width of cabinet. Door and/or drawer width will be reduced. Specify overall width of stile (up to 5 1/2" wide)

Extended stile left

Left stile widened

Ordering code: ESL Price: $58

Ordering Code: ISBL Price: $86

Extended stile right

Right stile widened

Ordering code: ESR Price: $58

Ordering code: ISBR Price: $86

Traditional only

Shown with ESR

Angled Wing Base

Shown with ISBR

Extend base cabinet stile on 45o angle. Specify left or right.

Extend Sides Back - Base

Extension of 8 1/2"

Uses 6" of wall space. Code: AWB8- 1/2"

Price: $208

Extend standard cabinet sides back as follows: Specify left or right.

Extension of 18"

Up to 30" deep

Uses 12 1/2" of wall space. Code: AWB 18 Price: $329

Code: ESB30B Price: $170 each side

Extension of 24"

Uses 17" of wall space. Code: AWB 24 Price: $404

Up to 36" deep

Code: ESB36B Price: $227 each side Up to 48" deep

Code: ESB48B Price: $343 each side

8 1/2" Extension shown

24" Extension shown

H-30

Shown with extend side back to 30" on right

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

30"

Base Options

Reduce Stile Width This option can be used to join cabinets together, in the field, to create an overall 1 1/2" stile between cabinets. Does not decrease cabinet width. (Door/Drawer will increase in width.) Specify left, right or both. Minimum width is 3/4" in Traditional Flush Inset series and 7/8" in Traditional Beaded Inset series.

Ordering Code: RSWBL (LEFT)

Price: $86

Ordering Code: RSWBR (RIGHT)

Price: $86

3/4"

3/4" 1 1/2"

1 1/2"

Reduce Stile Width on right shown 1 1/2"

Base Filler with Full Return Base fillers up to 4" wide with return up to 24". Specify return left or right. No toe. Ordering Code: Left BFFR(L) Ordering Code: Right BFFR(R) Ordering Code: Left & Right BFFR(LR)

34 1/2"

Price: $282 Price: $282 Price: $448

Casters Can be installed on any base cabinet. We offer two types (non locking) – one for carpet and one for hard floors (specify). 2 1/2" Diameter for Carpets • Load capacity 100 lbs • Tread - Metal • Mounting height 3" • Color: Brass. 3" Diameter for Hard Floors • Load capacity 100 Lbs • Tread - Rubber • Mounting height 3 1/4" • Color: Brass Ordering Code: CAST-C (carpet) Price: $427 per set (4)

Left shown 24"

Ordering Code: CAST -HF (hard floors) Price: $427 per set (4)

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-31

C R A F T - M A I D Dust Seal Attached to butt doors as a dust seal. Seal is flexible rubber. Available white, brown or clear. Code: DSW (White) Code: DSB (Brown) Code: DSC (Clear)

Price: $27 per door

7/16" Wide

Attach Center Stile to Door (Flush Inset) Ordering Code: ACSD Price: $96

Center stile attached to door

Ord

Frame Rail

H-32

Frame Stile

Door Rail

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Attach Center Stile To Door (Beaded Inset)

Ordering Code:ACSDB Price: $123

Center stile attached to door

Frame Rail - Beaded Frame Stile - Beaded

Door Rail

Attach Center Stile to Door

(Beaded Inset With False Mitre) Ordering Code: ACSDBFM Price: $219

Center stile attached to door

Frame Rail - Beaded w/ False Mitre Frame Stile - Beaded

Door Rail

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-33

C R A F T - M A I D

Leg Levelers Leg Levelers can be applied to any base, tall or vanity cabinet. Recessed toes on all exposed ends. 3/4" thick toe moulding with groove in back for toe clip. Available for Traditional, Traditional Plus and European Frame less cabinetry. Leg Levelers are adjustable from 3 3/4" up to 6 1/2" Code: LL Price: $176 per cabinet

c Fa

Toe Moulding

Clip for toe kick

3/4"

H-34

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Recess Cabinet Side In (Up to 3/4") Ends of traditional cabinetry can be recessed up to 3/4" so the edge of the end will be flush with the cabinet opening. Cabinet box will be less than overall frame dimension. Ordering Code: RCS Price: $96 per end

bin

Up Design Tip!

It is recommended that if side is recessed in to accept a panel during installation that side be recessed in 1/16" more than thickness of panel. This will allow for a perfectly flush joint. Example: 1 9/16" Integral StileRecess side in 13/16" to accept 3/4" panel.

Willow Basket - Loose

Basket Only - Size 17" x 13" x 7" high Ordering Code: WBL Price: $320

ail

3/4

R 2"

1 1/2" Stile

Double Beaded Exposed End (Integral End-Base) Code: DBEB Price: $81 plus cost of finished side(s)

Willow Basket with Wood Glides and Shelf

Note: Double Beaded Material will be MDF for uniformity of color.

(Installed in Cabinet) Ordering Code: WSB Price: $544 Add stained interior & matching wood interior if desired.

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-35

C R A F T - M A I D

Wide Integral Top Rail - Base (Up to 4 1/2")

Wide Integral Bottom Rail - Base(Up to 4 1/2")

Ordering Code: ITRB Price: $104

Ordering Code: IBRB Price: $104

Extend Cabinet End Up (up to 4 1/2")

Extend Top Rail Up (up to 4 1/2")

Extend cabinet end (up to 4 1/2") beyond cabinets specific height.

Extend top rail (up to 4 1/2") beyond cabinets specific height.

Ordering Code: ESU Price: $104 per end

Ordering Code: ETRU Price: $104 4 to up " 1/2

H-36

Up to 4 1/2"

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Traditional Only

Base Filler - No Toe

Reversible left or right

Width - Up to 4", Height - 34 1/2"

Base filler without toe up to 4" wide. Specify width. Base fillers over 4", double the price. Traditional & Traditional Plus

Traditional & Traditional Plus fillers do not have mounting return.

34 1/2"

European

European series fillers have a 6" mounting return. Ordering Code: BFNT Ordering Code: BFNTRL Ordering Code: BFNTRR Ordering Code: BFNTRLR

Price: $77 Price: $142 Price: $142 Price: $184

BFNT

BFNTRL or BFNTRR

BFNTRLR

Base Filler - With Toe

Width - Up to 4", Height - 34 1/2"

Base filler with toe up to 4" wide. Specify width. Base fillers over 4", double the price. Traditional & Traditional Plus

Traditional Only

Return R

Return L

Return L&R

Traditional & Traditional Plus fillers do not have mounting return. Traditional & Traditional Plus Toe Height is 4" European

European series fillers have a 6" mounting return on left or right. Specify left or right return. European Toe Height is 4" Ordering Code: BFWT Ordering Code: BFWTRR Ordering Code: BFWTRL Ordering Code: BFWTRLR

34 1/2"

Price: $134 Price: $155 Price: $155 Price: $197 BFWT

BFWTRR

BFWTRL

BFWTRLR

NOTE: If overlay on face is required, add "OL" to the code and add $66. Overlay will be lipped on three sides unless otherwise specified (shipped loose). European only. ©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-37

C R A F T - M A I D

Base Corner Fillers Specify with or without toe. Specify width. Width of each leg not to exceed 4" wide. Without Toe Ordering Code: BCFNT Price: $301

Base Filler with 45o Angled Face Up to 4" wide

Specify with or without toe kick. Includes 3" mounting returns left and right. Furnish sketch. 3" Ordering Code: BFAF Price: $323

With Toe Ordering Code: BCFWT Price: $301

3" Top View

4¼

Note: If overlay on face is required, add "OL" to the code and add $132. Overlay will be lipped on three sides unless otherwise specified (shipped loose). European only.

3" wide shown

Zero Filler - Base European shown

Base End Panel 3/4" x 34½" High Depth - Up to 24"

Both sides finished and banded front edge. No toe.

European Frame less only Designed to fit up flush with face of cabinet ends. 2" deep on sides splined togeather with 11/16" finished face flush with banded front edge of the ends. Ordering Code: ZEROFB Price: $208

Ordering Code: BEP Price: $166

H-38

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Base Cabinet with 3" Clipped Corner(s)

Any base cabinet can be ordered with one or both corners cut away at a 45o angle and finished to match the cabinet face. Specify right or left corner to be clipped. Left corner clipped

Code: CCL Right corner clipped

Code: CCR Price: $312 Each Add to cost of Base Cabinet specified.

21"

Top View

4¼

3" 3"

Shown with CCL and CCR

Traditional

Top View

3" European Construction 3"

Note: See Accoutrements Section for additional corner options. i.e. Reeding - Pilasters - Rosettes Hand Carvings, etc. ©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-39

C R A F T - M A I D

Base Cabinet with 3" Clipped Corner(s) and Flutes Any base cabinet can be ordered with one or both corners cut away at a 45o angle. Three flutes are standard. Available flute widths are 1/4", 3/8" or 1/2" (3/8" is standard, unless otherwise specified). Flutes stop 1 1/2" from top and bottom and are equally spaced unless otherwise specified. To order additional flutes, specify on order and add $42 per flute. Specify right or left corner to be clipped. Left corner clipped and fluted

Code: CCLF Right corner clipped and fluted

Code: CCRF Price: $436 Each Add to cost of Base Cabinet specified.

Top View

4¼

21"

Shown with CCLF and CCRF

Traditional

Top View

3" European Construction 3"

Note: See Accoutrements Section for additional corner options. I.e. Reeding - Pilasters - Rosettes - Hand Carvings, etc.

H-40

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Open Bottle Display

Lattice Style Wine Rack

Open bottle storage can be added to any standard base cabinet. Includes matching wood interior, stained or painted to match exterior in open section. Specify all dimensions with a sketch.

Available for any standard base cabinet. Includes matching wood interior, stained or painted to match exterior, in Wine Rack section Openings in lattice measure 3 3/4" each. Specify all dimensions with a sketch. When installing in deep cabinet, specify if unit is to be held to the front or back.

Note: Open bottle display is built as an integral part of the cabinet. Does not add to the height of the cabinet ordered. 6" minimum height opening for single bottle display; 12" minimum height for double bottle display.

Ordering Code: WR Price: Add $1.66 per square inch to the cost of base cabinet specified.

Ordering Code: OBDS (Single) Price: $489 Ordering Code: OBDD (Double) Price: $801

Examples of Lattice style wine racks added to standard base cabinets

Example of open bottle storage

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-41

C R A F T - M A I D

Pull-Out Waste Basket Large - 76 Quart Capacity

Waste basket is mounted in a pullout which is attached to the door. Door and pullout work as one unit. Available in full height door cabinets only. Minimum cabinet width is 24". Minimum cabinet depth is 21". Includes removable, washable waste basket, 14 1/2" x 14 1/2" x 24". Color: beige. Ordering Code: POTL Price: $732

See Section G for additional waste basket choices.

Pull-Out Waste Basket Standard - 30 Quart Capacity

Waste basket is mounted in a pullout which is attached to the door. Door and pullout work as one unit. Available in full-height door or door/drawer cabinets. Door/Drawer cabinets will have a full depth floor under drawer. Minimum cabinet width is 16" (Traditional & Traditional Plus). Minimum cabinet depth is 21". Includes removable, washable waste basket, 9 1/2" x 15 1/2" x 18". Color: White.

Double Pull-Out Waste Basket Two 30 Quart Capacity Containers

Waste baskets are mounted in a pullout which is attached to the door. Door and pullout work as one unit. Available in full-height door or door/drawer cabinets. Door/Drawer cabinets will have a full depth floor under drawer. Minimum cabinet width is 21. (Traditional & Traditional Plus) Minimum cabinet depth is 24". Includes two removable, washable waste baskets, 9 1/2" x 15 1/2" x 18". Color: White. Ordering Code: POTD21 Price: $680

See Section G for additional waste basket choices.

Double Pull-Out Waste Basket Two 35 Quart Capacity Containers

Available in full height door or door/drawer cabinets. Minimum cabinet width is 18". Minimum cabinet depth is 24". Unit is attached to door & features heavy-duty brushed aluminum fullextension slides. Designed with heavy duty wire frame for supporting the containers and a fully adjustable door mounting system. Ordering Code: POTD18 Price: $680

Ordering Code: POT Price: $544

See Section G for additional waste basket choices.

H-42

See Section G for additional waste basket choices.

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Pull-Out Bottle Storage Available only in standard pullout height. Storage holes are 4" diameter. Minimum cabinet depth is 22". 34½"

Ordering Code: POBS Price: $436

18" Wide shown

24"

Wire Pullouts

5 3/8" high, 18 3/8" deep

Four-sided bright chrome wire fences mounted on a wooden pullout shelf. Minimum cabinet depth is 21". Fits cabinet widths 19 1/2" to 30". Two door cabinets must be butt doors. Wider cabinets are available with two wire pullouts side-by-side on one shelf. Ordering Code: WPO Price: $396 each

Detail of Wooden Pullout Shelf for Chrome Wire Pullouts

Shelf pulls out on full extension undermount glides. Chrome wire pullouts are mounted on top of shelf. Shelf and glides are included in price of wire pullouts.

5/8" thick x 1¼" High Hardwood Edge ¾" Plywood top

Drawer Front

1¼"

¾" thick x 1¼" High

Note: Wire surrounds are available in 3 sizes: (15 1/2" wide 17 1/2" wide and 21 1/2" wide) Comparing to our standard pullouts, these would fit in the following cabinet sizes. 15 1/2" fits in a 21 1/2" traditional & traditional plus cabinet--19 1/2" frame less cabinet 17 1/2" fits in a 23 1/2" traditional & traditional plus cabinet--21 1/2" frame less cabinet 21 1/2" fits in a 28 1/2" traditional & traditional plus cabinet--27" frame less cabinet

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-43

C R A F T - M A I D Pullouts - Solid Maple Pullouts will be mounted on floor of cabinet and/or on adjustable shelves with full extension under mount slides. Full extension under mount Blumotion slides are standard at no additional cost. If only one pullout is ordered, specify location (36" wide maximum). Depth of the pullouts are 21" from front to back in a 24" deep cabinet. Dovetails are exposed in front with front of pullout scooped for finger pull. Note: In Traditional & Traditional Plus series, double door cabinets must be made with butt doors. Available in the following heights: Standard (4 1/4") Code: POS Price: $327 Medium (7 3/8") Code: POM Price: $343 Large (10 3/8") Code: POL Price: $359

Pullout with Scooped Front (Reverse Dovetail) Our standard pullout has scooped front and reverse dovetails.

Pullout with Doweled Front (4 1/4" high pullout only) Code: POSD Price: $513

4 1/4"

24" Cabinet = 21" deep Pullout 21" Cabinet = 18" deep Pullout

H-44

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Wood Storage Containers Wood storage containers (set of 3) sized to fit the interior of drawer box or pullout. One will be positioned front to back & two will be side to side. Containers will be made with 1/2" Solid Maple and have finger holes for easy removal. Note: Works best when used in deep drawers or pullouts. Code: WSC (Set of 3) Price: $500 Finger Holes Variable

3 1/2"

Change Face

1/2" sides, front & back (Dovetailed)

Pull-Out Towel Bar Unit

Alter size and location of components. (add additional door and drawer charges if number of doors or drawers change)

Solid Maple

Ordering Code: CF Price: $104

Ordering Code: POTBU Price: $513

Side mount full extension glides. Available in 9", 12" and 15" wide cabinets.

1 1/

2" 16

1/2

Example: B42 with Modified Door/Drawer Openings

" 1 1/

2" 21"

1 1/

Note: If cabinet has finished interior, Towel Bar Unit will be finished to match cabinet unless otherwise specified. Looks best in open units.

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-45

C R A F T - M A I D

G-Unit

Warming Drawer Cut Out

Can storage unit may be mounted on full door base cabinet, G-Unit consists of plywood adjustable shelves. Existing shelves within cabinet will be reduced in depth to accommodate G-Unit.

Specify model, cut-out size and location of cutout on cabinet. Note: Interior of the warming drawer cutout is unfinished.

Ordering Code: G-Unit Price: $370

Ordering Code: WDCO Price: Add $265 to the cost of the base cabinet specified. Traditional - Minimum stile width in cutout = 1"

1 5/16" Shelf Profile

Warming Drawer Cut Out Specify all dimensions

Step Stool Height when open - 15 1/8". Height when folded - 18 3/8". Depth when folded - 4". Color : White with Gray Steps. Step stool can be stored inside cabinet.

Pull-Out Ironing Board Replaces base cabinet drawer. Available for B18 only. Extends 36" past cabinet face. Ordering Code: POIB Price: $1127

Ordering Code: SS Price: $405

H-46

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Pull-Out TV Swivel Unit Natural Birch Shelf

Unit slides out and swivels 360o. Weight limit is 132 lbs. Minimum cabinet width is 18". Minimum cabinet depth is 17". All two door cabinets will have butt doors. Note: As a standard, the TV shelf is made 4" less than the inside dimension (width) of the cabinet. However, if you can provide the dimensions of the TV, the shelf can be custom made to fit the TV. Note: You may want to consider stained interior, matching wood interior, or Pocket Doors. Ordering Code: POTV Price: $884

Pullout TV swivel unit (Natural Birch Shelf)

Pocket Doors Pocket door hardware reduces interior space (from frame opening) 1 1/2" per door without partition, or 3" per door with partition. Partitions required, only if adjustable shelves are ordered (partitions are standard, unless otherwise specified). Pocket door hardware is only available in 2" increments. The door stops 4 1/2" to 6 1/2" short of fully retracting, depending on the depth of the cabinet. The remainder of the door is exposed in the open position. Maximum door size - 24" x 48". Center stile is omitted on all two door cabinets. Includes matching wood & finished interior. Note:Florentine Door Style not available. Ordering Code: POCKD Price : $599 per door plus door premium 4 1/2" to 6 1/2"

Side View

©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-47

C R A F T - M A I D

Cutting Board in Top Rail

Tilt-Down Soap Tray

Traditional & Traditional Plus only

Convenient storage for sponges or soaps. Requires caution when making sink or surface burner cutout to allow sufficient clearance. Whenever cabinet is 36" or wider, soap tray will be mounted on right side. Ordering Code: ST Price: $261 Front

3/4" hard maple cutting board installed in top rail of any base cabinet. Specify location desired. Not available in European Series (see Cutting Board Behind Door). Cutting Boards are 14" or 18" wide and 19" deep. The largest size that fits the cabinet will be used. Ordering Code: CBR Price: $193

3" 1 1/4" 2"

Soap tray also mounted on back of door Code: STD Price: $101 Raisable Mixer Shelf

Cutting Board Behind Door

Available for Full Door Bases only. only Minimum cabinet width is 18". Mixer shelf raises to the countertop. Maximum load capacity of 20 lbs.

3/4" hard maple cutting board mounted inside base cabinet under drawer. If installed in full height door base, cutting board will be mounted under sub top. Cutting boards are 14" or 18" wide and 19" deep. The largest size that fits the cabinet will be used.

Ordering Code: RMS Price: $281

H-48

Ordering Code: CBBD Price: $185

©C R A F T - M A I D KITCHENS INC. 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

Base Options

Adjustable Wood Inserts (For Drawers) 3/4" Thick - Solid Maple

Front and back of drawer have a series of holes with metal removable posts to accept removable vertical drawer dividers. Number of holes and dividers vary, depending on size of drawer. Edge of shelf is routed to slide over metal posts.

Double Cutlery Divider Wood w/ Removable Upper Tray Code: CDWD Price:$498 Top View of lower Cutlery divider

Code Price ADI-18 (2 Sets Holes/2 Dividers) $146 ADI-21 (3 Sets Holes/2 Dividers $166 ADI-24 (4 Sets Holes/3 Dividers) $186 ADI-27 (5 Sets Holes/4 Dividers) $213 ADI-30 (6 Sets Holes/5 Dividers) $240 ADI-33 (7 Sets Holes/6 Dividers) $267

9 5/16"

Equal

21" 9 1/4"

Equal

Holes to accept metal posts Front Top View of upper tray

Equal

Edge of Divider

9 1/8"

Bottom tray (1 3/4" high)

Detail of upper removable tray

Removable upper tray (2 1/8" high)

(Front view)

9 3/4"

Shown with 3 dividers 2 1/8"

7/8" diameter holes ©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-49

C R A F T - M A I D

Cutlery Divider - Wood 3/8" Thick - Solid Maple

Removable for easy cleaning. If cabinet has more than one drawer, specify which drawer is to have Cutlery Divider. Standard

Ordering Code: CDW Price: $124 Special

3" 3" 3"

Supply sketch with dimensions.

3" 3" 3"

Ordering Code: CDS Price: $166

3" 3" B12

Fixed Partition in Drawer 3/4" Thick- Solid Maple Partition fixed in a drawer. (Front to back or side to side)

Code:PARD Price: $41 each

H-50

3" 3"

B15

3" 3" B18

B21 to B33 (Specify Left or Right)

Double Tier Wood Cutlery Divider Top section attached to lower unit using side mounted metal full extension glides. The back of the drawer box is reduced in height to allow the top unit to slide back and out the back of the drawer, giving access to the lower unit. Code: CDWDS Price: $747

Base Options

Cutlery Divider - Double

Cutlery Divider Moulded Polystyrene

Double Tiered moulded white polystyrene cutlery divider. Removable and washable. Available for B18 and B24 only.

Removable, washable, white polystyrene. Available for any base cabinet drawer up to 24" wide. If cabinet has more than one drawer, specify drawer to have Cutlery Divider.

Ordering Code: CDD Price: $365

Ordering Code: CDP Price: $166

Spice Drawer Fits any standard height drawer. Natural Maple. Code: SDW Price: $312

4 1/8" inside height dimension

Side View

H-51

C R A F T - M A I D

Chopping Block in Drawer

Pull-Out Keyboard Drawer

Solid hardwood chopping block (1 1/2" thick) mounted in drawer. Includes full extension undermount slides. Chopping block is removable for cleaning.

Drawer will replace wood drawer box and will be fitted with Tilt-Down drawer front. Highimpact light gray plastic drawer mounts with slides. Fits most standard keyboards. Size of drawer is 21 1/2”W x 13” D x 2” H.

Ordering Code: CBD Price: $616

European minimum cabinet width - 27". Traditional minimum cabinet width - 30". Minimum cabinet depth - 18". Includes foam wrist rest. Ordering Code: POKBD Price: $359

Note: See Section G for Planning Desk Drawers.

Spice Drawer (White Plastic)

Accommodates most standard spice containers. Available for any standard base cabinet drawer. Drawer is white plastic.

Cut-Down Drawer Box Reduce height of drawer box (3 3/8" high as standard) to accommodate surface burners. Ordering Code: CDDB Price: $53

Ordering Code: SD Price: $208

3 3/8"

H-52

Base Options

Custom Silverware Cloth Liner With Cover

Standard Silverware Drawer Trays With Cover

Silver Cloth Liner custom fitted to the inside dimension of drawer box. The configuration will vary depending on the number of place settings. (Please specify) You can indicate the configuration or allow the designer to use best judgement.

Available in three sizes. 19 3/4" x 12 1/4" x 2 1/4" 17 3/4" x 14 1/8" x 2 1/4" 12" x 15 1/4" x 2 1/4"

Code: CPSCL Price: $771

Code: SSWCL Price: $189 4"

19 3/

2 1/4

/4" x x 12 1

17 3/4" x 14

1/8" x 2 1/4"

/4"

/4" x 2 1

12" x 15 1

Note: If you prefer a custom looking fit, you might consider partition (s) in drawer box. Code: PARD Price: $41 ©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-53

C R A F T - M A I D

Knife Block in Drawer

Bi-folding Doors (Soss Hinges)

Built-in knife block of natural hardwood with cork board in front. Available in 12", 15", 18" and 21" cabinet widths. Available in two styles: Straight for same size knives or angled for different size knives. Ordering Code: KNFB (Straight Price: $208 Ordering Code: KNFBAF (Angled front) Price: $235

Available in all door styles (4/4 or 5/4) Available in all series--(Traditional, Traditional Plus, including Inset & Frame less) Soss hinges between doors Standard hinges left and right. Maximum Width of door: 17" Maximum Height of door: 48" Code: BIFD Price: $15 0 per pair (Plus door premiums)

Top View

Straight Knife Block

Soss Hinges

Drawer in Toe Kick Drawer box has slab drawer front, pulled forward of toe notch 1/4". This allows front to be flush when 1/4" toe moulding is applied--unless otherwise specified. Drawer box is 3 1/4" high. Code: DTK Price: $250

Angled Knife Block

H-54

Base Options

Vertical Plate Holder Can be installed in working drawers or pullouts. Heavy duty under mount guides on drawers.

Ordering Code: POVPH (In pullout) Price: $969 (Price includes the pullout) Ordering Code: WDVPH (In working drawer) Price: $643 (Add to cost of base cabinet--Minimum drawer opening is 13" high)

H-55

C R A F T - M A I D

Stacking Plate Holder Can be installed in working drawers or pullouts. Heavy duty under mount guides on drawers. Ordering Code: POSPH (In pullout) Price: $767 (Price includes the pullout) Ordering Code: WDSPH (In working drawer) Price: $440 (Add to cost of base cabinet--Minimum drawer opening is 9 5/16" high)

H-56

Base Options

Drawer Pot Lid Storage Dowel Inserts Drawer box with 3/4" dowel pressed into front and back of drawer for lid storage. Available with one or two dowels. See sketch. Ordering Code: PLDS (Single dowel-specify left or right) Price: $100

Drawer box w/ 3/4" dowels left & right 3"

3" Ordering Code: PLDD (Two dowels) Price: $132

(Front View)

Additional Shelves (Standard 3/4" thick) Additional shelves installed in cabinet. Specify if fixed or adjustable. If fixed, supply sketch with dimensions.

Non Skid Liner Non skid rubber mat, cut to size and installed on floor of drawers or pullouts. Ordering Code: NSL Price: $120 per drawer or pullout

Ordering Code: AS Price: $104 each

Thick Shelves in place of standard 3/4" shelves 1" thick shelves w/ banded edge...............................Ordering Code: TS1B

Price: $45 each

1" thick shelves w/ hardwood profiled edge...........Ordering Code: TS1H

Price: $92 each

1 1/2" thick shelves w/ hardwood profiled edge....Ordering Code: TS12H

Price: $135 each

H-57

C R A F T - M A I D

Clear Glass Drawer Front Available in widths 18" to 30". Price includes partition in drawer.

File Holder - Hanging For Letter size or Legal size files Drawer box is slotted to accept 1/8" x 1/2" black metal file support strips. Minimum drawer width for letter size is 14 5/8" Minimum drawer width for legal size is 17 1/2" Need 12" minimum opening in height. Specify if file supports rods are to run front to back or left to right. Specify letter or legal size.

Ordering Code: GDF Price: $365 each

Code: FH (Letter file) Price: $157 Top View

Removable Partition

Code: FHL (Legal size) Price: $157

Inside 3" dimension

12 1/4"

Tray Dividers

iab

10 3/8"

Va r

Ordering Code: TD Price: $104 each

Natural Birch vertical tray dividers (3/8" thick) may be installed in any standard base cabinet. Specify quantity and spacing.

Note: Tray dividers ordered in a door/drawer cabinet require a fixed floor under the drawer. Code: FIXF Price: $104

H-58

Note: A partition may be added on the side of wider drawers for additional storage. Code: PARD Price: $41

Base Options

Radiator grill Cloverleaf perforations For use in radiator cover. Silver or gold finish; .020" thickness. Maximum size 24" x 36". Code: CRGS (Silver) Price: $157 per piece Code: CRGG (Gold) Price: $157 per piece

Fruit or Vegetable Bin Molded of high impact polystyrene (approved for food storage by the Food and Drug Administration). Easy to clean, self-venting, impervious to odors. Minimum cabinet width - 15". Available with full height door only. Color: White. Ordering Code: FVB Price: $1008 per set(3)

11½"

21"

17¾

Radiator Grille - Union Jack May be used as door insert on radiator cabinet. Maximum size 24" x 36". Allows 33% air flow. Silver or Gold paint finish. Code: UJRGS (Silver) Price: $157 per piece Code: UJRGG (Gold) Price: $157 per piece

Radiator Cover Submit sketch with all dimensions. Indicate choice of grill (this page) Ordering Code: RCFG (with fixed grill) Price: $20 per linear inch Ordering Code: RCWD (with working doors) Price: $24 per linear inch

H-59

C R A F T - M A I D CD/ DVD/ VHS MEDIA STORAGE This one system provides "flip" access to most popular forms of media stored vertically or horizontally. Rails easily adjust to any media width. The following chart shows Available with one to five rows. minimum widths inside a drawer Can be installed in drawer boxes or pull-outs. when media is stored See charts to approximate storage capacity. horizontally. *Note: Craft-Maid does not guarantee any drawers over 36" wide.

CODE: CODE: CODE: CODE: CODE:

MS1R MS2R MS3R MS4R MS5R

(1 Row) (2 Rows) (3 Rows) (4 Rows) (5 Rows)

Price: Price: Price: Price: Price:

$161 $170 $179 $188 $197

In a Traditional Frame Cabinet, the minimum front fame opening heights when installing the following inside a drawer: MEDIA

MINIMUM FRAME OPENING HEIGHT

DVD (Horizontally) DVD (Vertically) VHS (Horizontally) CD (Horizontally)

6.84"

H-60

7-3/4" 9-½" 6-¼" 7"

16.96"

13.08"

25.14"

19.32"

33.32"

25.56"

31.80"

41.50"

38.08"

Base Options CD/ DVD/ VHS MEDIA STORAGE Additional illustrations of how media storage can be configured in a drawer vertically.

The following chart shows minimum widths inside a drawer when media is stored vertically.

6.04"

8.78"

13.08"

16.96"

19.32"

25.56"

25.14"

31.80"

33.32"

38.04"

41.50"

H-61

C R A F T - M A I D

Cabinet Organizer Chrome wire shelf unit. Accessible from one side. Available in Full Door Base cabinets only. Available attached to the door or installed behind hinged doors. On single door cabinets, the unit will be mounted opposite the hinge, unless otherwise specified. On double door cabinets, specify left or right mounting. Unit comes standard with 3 shelves. Shelves are 3" high and 18 1/2" deep. Shelves are available in 4 widths--4 3/8", 6 1/4", 8 1/4" and 12 1/2". See the

Towel Bar Silver anodized extendable towel bar mounted inside cabinet.(Three bars) Under mount or side mounted. Minimum cabinet opening is 6". Minimum cabinet depth required is 20". Ordering Code: TB Price: $104

Kessebohmer Section In the Q-Accoutrements Section for Additional Information. Shelf Width: Minimum Opening: 4 3/8" 6" 6 1/4" 8" 8 1/4" 10" 12 1/2" 14" Ordering Code: CO1 (Attached to Door) Ordering Code: CO2 (Installed behind hinged door)

Bread Lid Shown attached to door

1/4" Clear Acrylic Plexaglass lid plouged into L & R sides only. If wider than 24", need center divider & 2 plexiglass lids. Back cut down to bottom of plough

Ordering Code: BL Price: $157

1/2"

Shelf

5/16" 3/8"

H-62

Variable

Base Options

Swing-Out / Slide Out Shelves - Wood Available for straight corner base cabinets. Natural Birch. Shelves swing independently. Minimum opening width 18". Fits in 42" or 48" wide cabinets. Shelves are 29" for a 42" cabinet and 36" for a 48" cabinet. Ordering Code: SOSO Price: $998 per set (2)

Wooden Lazy Susan on Turntable - Base For use in diagonal corner base cabinets. Wood Lazy Susan mounted to the floor or on an adjustable shelf (no pole). Lazy Susan hardware has stop position. Shelves are 1/2" thick plywood. Wood lip is 1/2" thick x 2 3/8" high. The band is steamed bent, glued and doweled together to form a continuous lip. Lifts off for cleaning. Diameter of shelf is 28". Ordering Code: LSSB Price: $275 per Lazy Susan

H-63

C R A F T - M A I D

Optional Bead Board (2 Sided) Bead Board is 3/8" thick solid wood, 3 1/4" wide overall. Available for Beaded finished sides (exterior) and finished backs (interior or exterior). Does not add to overall width of cabinet. Note: Bead Board will expand and contract over time, causing the joints to open and the finish to crack. Therefore Craft-Maid will not Warrant Bead Board when used in this manner. Craft Maid recommends our standard Beaded material of MDF, which is very stable and does carry our standard warranty.

Side A has bead on 1 1/2" centers - Side B has bead on 3" centers Specify "Finish Side A" or "Finish Side B"

Code: BBBIB (Bead board back - Interior base) BBBEB (Bead board back - Exterior base) BBSEB (Bead board side - Exterior base)

H-64

Price: $304 per linear foot $381 per linear foot $598 per side

Base Options

Pull Out Table System Unique Pull Out Table hardware allows the inner table top section of the 2pc. top to fold on tracks when the table is closed, occupying a minimum of space. Pull Out Table replaces drawer box in cabinet. Drawer front is mounted to front of Slides and pulls out with table.

Minimum Cabinet Depth is 24". Maximum Cabinet Width is 33". Maximum table top thickness is 3/4".

NOTE: DRAWER FRONT WILL NOT BE FLUSH WITH COUNTERTOP SURFACE

IF FLUSH COUNTERTOP SURFACE IS REQUIRED, DRAWER FRONT CAN BE APPLIED AS 2 PIECES AND ONLY THE LOWER SECTION WILL PULL-OUT WITH THE TABLE AND BE FLUSH WITH COUNTERTOP. UPPER SECTION OF DRAWER FRONT WILL BE FIXED TO THE CABINET FACE.

See the Kessebohmer Section In the Q-Accoutrements Section for Additional Information. ©C R A F T - M A I D KITCHENS 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

H-65

C R A F T - M A I D Sink Drawer U-Shaped Drawer for fitting around Sink. Ordering Code: USD Price: $644 U-shaped Drawer Box allows max. storage with a full width drawer front. Available in sink bases and vanity bases. Sink width, depth and height dimensions are required when placing the order. It is the dealers responsibility to make sure the drawer box will clear the sink bowl. Minimum width of drawer box L & R = 6" Maximum width of drawer box L & R = 8" Depth of drawer box in front of chase is 3-1/2" (2" inside)

H-66

Base Options

Corner Dimensions for Base Cabinets

Wa ll

in ll L

Cabinet Depth =24"

49 3/

1/8

45 3/

4”

8”

1/2

”

Cabinet Face Measurement

1/8

1/4

1/2

8”

”

39 "

Cabinet Depth =24"

12” 15” 18” 21” 24” 27” 30” 33” 36" 39" +3"

Lin

”

8 5/ 36

4”

8”

”

Wa ll

e Lin ” 33 ” 36

ll Wa

”

1/2

Cabinet Face Measurement

45 "

48 "

51 " 54 " 57 " 60 " +3

12 3/4” 17” 21 1/4” 25 1/2” 29 3/4” 34” 38 1/4” 42 1/2” 46 3/4" 51" +4 1/4"

1/4 47

1/2 51

1/8

Lin

3”

1/8

”

H-67