AUDIO
• CB Antenna • Audio Controllers & Accessories
110 I CAN AM ACCESSORIES
• Helmet Headsets • Speaker Kits • Replacement Speakers
COVERS
4 I AUDIO
PEGS, BOARDS & GRIPS
Table of Contents
112 I ATV ACCESSORIES
14 I COVERS
113 I FLAGS &FLAG POLE MOUNTS
• Driver & Passenger Peg Kits • Highway Pegs & Boards • Floorboards
• Heated Grips & Thumb Warmers • Ball/Pin Extension • Brush Guards
• Transportor Cover • Rivets TM
• Flags & Pole Mounts
• Transportor Covers TM
114 I LICENSE PLATE ACCESSORIES
21 I Windshields
116 I LIGHTING
25 I cruiser accessories
120 I GENERAL ACCESSORIES
• Saddlebag & Trunk Liners • Rack & Helmet Bags
• Marker Lights • Light Bulbs & Electrical • Running Lights • Load Equalizer • LED Dual Conversion Harness
• Windshield Pouches
• TireGard® Tire Pressure Monitor Sytems • Oil Filters • Rain Gators • Kickstand Foot • Volt Meters
• Rubber Splashguard • Valve Stem Covers • Tie Downs • Show Caps • Plastic Rivets
AT V ACCESSORIES
• Radiator Grilles • Axle & Caliper Covers • Tank & Fender Dividers • Neck, Frame & Swing Arm Covers • Fender Rails, Extensions & Racks • Oil Caps, Dipsticks & Fuel Caps • Drive Shaft & Bolt Covers • Air Cleaners & Side Covers
CAN AM ACCESSORIES
FOR HONDA, KAWASAKI, SUZUKI, YAMAHA, & HARLEY DAVIDSON
126 I INDEX
FLAGS & FLAG POLE MOUNTS
• Driving Lights & Turn Signal Kits • Handlebar Risers & Accessories • Triple Tree Accents & Accessories • Switch Box & Master Cylinder • Regulator & Reservoir Covers • Highway Bars & Pac-A-Derms • Sissy Bar & Saddlebag Stays • Visors & Grilles • Mirrors & Levers
• Brackets
TOURING ACCESSORIES
• Windshields For Cruisers & Touring
• LED License Plate Holders • License Plate Holders
• Storage Pouches
59 I TOURING accessories FOR gl1800, gl1500, gl1200, gl1100, & gl1000
• Speakers & Speaker Trim • Conversion Harnesses • Luggage & Fender Racks • Kickstand • Lower Fog Light Kits • Timing Chain Cover • Front Lower Cowl • Dual Load Equalizer • Backrest & Armrest • Frame & Battery Side Covers • Pockets & Pouches • Helmet Lock Extensions • Fairing Accents & Air Intake Grilles • Master Cylinder Switch Block & Covers
LIGHTING GENERAL ACCESSORIES
www.bigbikeparts.com
LICENSE PLATE ACCESSORIES
• Driving Lights • Fender Rails, Extensions, & Accents • Turn Signal Lens & Accent Grilles • Fairing Face Molding & Accents • Trunk & Saddlebag Lights • Handlebar Dampeners & Levers • Volt Meter • Passenger Floorboards, Risers • Trunk Handles • Scuff Pads, Grommets & Rivets • Caliper & Rotor Covers • Receiver Hitch & Rack • Windshield Garnish • Headlight Protector • Lights & Lens Grilles • Wind Deflectors
CRUISER ACCESSORIES
18 I LUGGAGE & BAGS
WINDSHIELDS
• UltraGard® The Classic Series • Fitment Chart
• Brake Pedals & Shifter Covers • Grips & Heated Grips
LUGGAGE & BAGS
6 I PEGS, BOARDS, & GRIPS
•
E-mail us info@bigbikeparts.com
3
SOUND SYSTEM + HELMET HEADSET & ACCESSORIES
Audio
2 Year Warranty on all helmet headsets and audio controllers. Inquiry Line 1-888-BIG-BIKE
elmet H Headset
Includes a slim unobtrusive and flexible microphone for easy positioning and a small quick disconnect plug for easy detachment and attachment. High frequency output speakers for a clear, crisp sound. Headset cord is included.
NEW Waterproof Sound System
This compact high fidelity sound system comes with waterproof components. The waterproof volume control with its 3.5mm universal aux-in connection is compatible with iPod, MP3, Portable Players and Satellite Radio Systems. The custom engineered waterproof speakers are a compact 2-1/2” in chrome housings and bring an unprecedented sound quality bigger than their size. Multiple mounts for the surface, 7/8” or 1” handlebar and mirror mount brackets allow mounting to almost any ATV/ UTV/ Motorcycle/ Snowmobile or watercraft. The waterproof 40 watt class D amplifier is part of the key in delivering such great sound. Fitment
Part No.
Unit
Universal Fit - ATV/ UTV/ Motorcycle/ Snowmobile/ Watercraft
13-250A
Set
Fitment
Part No.
Unit
Harley-Davidson (pre 1998), Honda, Kawasaki, Suzuki, & Yamaha
13-201
Set
$
Helmet Headset Replacement Cord
13-202
Each
$
159.95
$
No. 13-105
Description
Part No.
Unit MSRP
Microphone Windsock-Foam Universal Fit Large
13-100
Each
$
Protective Vinyl Windsock Cover
13-105
Each
$
Small Windsock Universal Microphone Fit 13-103
Each
$
Plugs in-line with current 5 pin headset, giving the rider individual left and right speaker control and microphone volume. Fits most 5 Pin Din Jacks.
No. 2-494
3.95 7.95
3.95
No. 2-307 No. 2-305
Part No. Unit MSRP
Harley-Davidson (pre 1998), 13-206 Honda, J&M, Kawasaki, Suzuki, & Yamaha
Each
$
59.95
Fitment
Controller
Audio Controller allows passenger to have volume control for speakers and press to talk capabilities for CB. Plugs into existing wire harness, no splicing required. Fitment
Part No.
Unit
MSRP
Honda GL1800 Gold Wing 2001-2010
13-203
Each
$
69.95
Honda GL1500 Gold Wing 1988-2000
13-205
Each
$
69.95
•
No. 2-308
Cord Holder Accessories
Passenger Audio
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
25.95
Safeguards against the elements and alleviates wind noise without affecting voice transmission.
MSRP
Volume Control
4
89.95
Universal Windsocks
5 Pin Din Fitment
No. 13-100
No. 13-103
MSRP
Part No.
Unit MSRP
Easy Clip Cord Holder: A one-handed 2-494 (chrome) Pair chrome plated intercom cord holder to firmly hold the headset cord plug. Fits GL1500/1800 Driver
16.95
$
Cord Keeper: This two piece set securely holds the helmet pigtail cord and prevents it from dangling loosely. Fits GL1500/1800 Driver & Passenger
2-308 (black)
2-307 (chrome) Pair
$
Cord Clips: This two piece set replaces the OEM communications cord holders. Fits GL1500/1800 Passenger
2-305 (chrome) Pair
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
9.95
Pair
$
10.95
10.95
AUDIO
SPEAKER KITS + REPLACEMENT SPEAKERS + ANTENNA
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS
Rear Speaker Kit Includes fader and Plug-N-Go wire harnesses. No splicing required. Part No.
Aspencade & GL1500/6 Gold Wing
2-294
Wire Harness Only
2-294WI
Replacement Speaker 15 Watts 2-169C
Kit
$
54.95
Each $32.95 Pair
$
22.95
Honda GL1200 Front & Rear & 2-169C Honda GL1500 Rear
Unit MSRP Pair
$
22.95
Honda GL1800 Gold Wing 2001-2010, 2012
52-657
These 2-way speakers have Butyl rubber surround and a plastic cone to offer better sound quality than the OEM and other speakers on the market. The kit is water resistant and features a suspended tweeter, 30 watt and 3 ohm. Speakers measure 4-1/2” in diameter and are 2-1/4” deep. Plugs into existing wire harness, no splicing required.
109.95
$
52-717
Unit MSRP Kit
$
Replacement Speakers fits Honda GL1800 Gold Wing Front/Rear 2001-2005, Honda GL1800 Gold Wing Rear 2006-2010
13-102
Pair
$
69.95
45.95
30 watts of output for the GL1800. Weatherability is enhanced over OEM by a plastic coating over the inner cones. Matches sound characteristics of OEM. One way speakers measure 4-1/2” in diameter and are 2-1/8” deep. Plugs into existing wire harness, no splicing required.
$
Honda GL1800 Front 2001-2005 13-104 & Rear 2001-2010, 2012
Pair
$
89.95
64.95
No. 52-607
Part No.
Rear Speaker Kit fits Honda GL1800 Gold Wing Front/Rear 2001-2005
52-607
Wire Harness Only
52-607WI Each $34.95
Replacement 30 Watt Speakers fits 13-101 Honda GL1500 Front, Honda GL1800 Gold Wing Front/Rear 2001-2005, & Honda GL1800 Gold Wing Rear 2006-2010
www.bigbikeparts.com
•
Unit MSRP Kit
Pair
E-mail us info@bigbikeparts.com
$
$
59.95
34.95
5
GENERAL ACCESSORIES
Kit
Fitment
LIGHTING
Unit MSRP
Honda GL1800 Gold Wing Rear 52-767 2001-2005
LICENSE PLATE ACCESSORIES
Rear Speaker Kit
FLAGS & FLAG POLE MOUNTS
Part No.
Two Way Rear Speaker Kit fits Honda GL1800 Gold Wing 2001-2005
AT V ACCESSORIES
No. 52-717
Fitment
These lightweight 2-way speakers with wire harness have Butyl rubber surround and a plastic cone. Features include a suspended tweeter, 30 watt, 4 ohm and are water resistant. Speakers measure 4-1/2” in diameter and 2-1/4” deep. Plugs into existing wire harness, no splicing required. Part No.
Kit
Two-Way Rear Speaker Kit
Neodymium Front & Rear Speaker Kits
Fitment
Unit MSRP
CAN AM ACCESSORIES
Part No.
Part No.
TOURING ACCESSORIES
Upgrades OEM 8 watt front or rear speakers to 15 watt speakers.
Fitment
CRUISER ACCESSORIES
Replacement Speakers Fitment
This kit mounts to the trunk just like OEM with included hardware. Fold down feature. Plugs into existing wire harness, no splicing required. Antenna length is 46-1/2”.
Unit MSRP
WINDSHIELDS
Fitment
C.B. Antenna
DRIVER + PASSENGER PEG KITS
Pegs, Boards, Grips > All kits come complete with peg and stem mount.
RAIL: 5-1/2” x 2” x 1-1/4” (Shown 21-421J)
Fitment
DIAMOND: 5-1/2” x 2” x 1-1/4” (Shown 21-421K)
TEARDROP: 5-1/2” x 2” x 1-1/4” (Shown 21-421L)
FLAME: 5-1/2” x 2” x 1-1/4” (Shown 21-421P)
Rail
Diamond
Teardrop
Flame
Celestar
21-928J
21-928K
21-928L
21-928P
21-928Q
$
GL1500 Gold Wing Interstate 1991-1996 (Passenger) Valkyrie 1995-2002 (Passenger) VF750 Magna 1982-2002 (Passenger) VF750 1984-2003 (Passenger) VT750 ACE 2000-2003 (Passenger) VT750 Spirit (Driver/Passenger) VT600 (Driver) VT600 1988-1998 (Passenger) VT600 1999-2007 (Passenger) VT750 ACE 1998-1999 (Driver/Passenger) VT1100 (Driver/Passenger) VT1100 Sabre/Spirit (Driver/Passenger) VT1100 ACE/Aero (Passenger) VT1300 Fury (Passenger) VTX1300 R/S 2002-2003 (Passenger) VTX1800C 2002-2004 (Passenger) VTX1800 R/S 2002-2003 (Passenger)
21-421J
21-421K
21-421L
21-421P
21-421Q
$
GL1500 Gold Wing I/A/SE 1988-2000 (Driver) Valkyrie 1999-2002 (Driver) VF750 Magna 1982-2002 (Driver) VT750 ACE 2000-2002 (Driver) VT750 Phantom, RS VT1100 ACE (Driver) VTX1800 C/F (Driver)
21-424J
21-424K
21-424L
21-424P
21-424Q
$
GL1800 Gold Wing (Driver)
21-523J
21-523K
21-523L
21-523P
21-523Q
$
VT750 Aero (Driver)
21-529J
21-529K
21-529L
21-529P
21-529Q
$
21-727J
21-727K
21-727L
21-727P
21-727Q
$
VL800 2001-2004 (Driver) M50 2005-2006 (Driver)
21-523J
21-523K
21-523L
21-523P
21-523Q
$
VL800/C50 2001-2005 (Passenger)
21-421J
21-421K
21-421L
21-421P
21-421Q
$
C50 2006-2009 (Passenger) M50 (Passenger)
21-821J
21-821K
21-821L
21-821P
21-821Q
$
21-421J
21-421K
21-421L
21-421P
21-421Q
$
RIDE SOFT: 4-1/2” x 1-1/2” x 1-3/8” (Shown 21-421S)
CELESTAR: 5-1/2” x 2” x 1-1/4” (Shown 21-421Q)
MSRP
Ride Soft
MSRP
119.95
21-928S
$
109.95
21-421S
$
109.95
21-424S
$
109.95
21-523S
$
109.95
21-529S
$
109.95
21-727S
$
109.95
21-523S
$
109.95
21-421S
$
109.95
21-821S
$
109.95
21-421S
$
HARLEY-DAVIDSON* Most All
99.95
HONDA 99.95
99.95
99.95 99.95
KAWASAKI VN900 (Passenger) VN1500 (Passenger) VN1600 (Passenger) (Not Nomad) VN2000 (Passenger)
99.95
SUZUKI 99.95 99.95 89.95
YAMAHA V Star 650 Custom/Classic (Driver/Passenger) V Star 950 (Passenger) V Star 1100 Custom/Classic (Driver/Passenger) V Star 1300 (Passenger) XV 1600/XV 1700 (Passenger)
* Choose the style you want to be paired with a 1/2” male mount for Harley-Davidson fitments. All pegs D.S. Patent #1.161.859
6
To l l Fre e D e a l e r O rd e r L i n e 1 . 8 0 0 . 8 2 6 . 2 4 1 1
•
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
99.95
PEGS, BOARDS & GRIPS
Mini-Board Mini Highway Board kits, complete with adapters and bar clamps. Dimension 5-1/2” x 1-3/4” x 4”.
Mini Boards
Part No.
Unit
BBP # 21-421R
921412R
Pair
149.95
21-928T
$
MSRP
Vantage Board Passenger
(Shown 21-421T)
7.95
$
Cruis Board Passenger System TM
MSRP
HARLEY-DAVIDSON* $
Valkyrie 1999-2002 (Driver)
21-424R
$
GL1500 Gold Wing Interstate 1991-1996 (Passenger) Valkyrie 1995-2002 (Passenger) GL1800 Gold Wing (Driver) VT750 Ace 2000-2002 (Driver) VT750 Ace 1998-1999 (Driver/ Passenger) VT750 Aero (Driver) VT750 Phantom/RS VT750 Spirit (Passenger) VT1100 (Driver/Passenger)
21-421R
$
109.95
21-421T
$
21-421R 21-523R 21-424R 21-421R
$
109.95 109.95 $109.95 $109.95
21-421T
$
21-421T
$
21-529R 21-424R 21-421R 21-421R
$
21-421R
$
Custom Driver & Passenger Peg Kits are available in multiple styles to compliment your bike. Cast steel with chrome plating for durability and non-slip rubber inserts for grip. All kits come complete with the peg and stem mount. Dimension 6-1/2” x 5-3/4” x 1-1/2”.
179.95
HONDA 179.95 179.95
$
109.95 109.95 $109.95 $109.95
179.95
179.95 179.95
21-337
$
269.95
179.95
21-338 21-338
$
269.95 269.95
21-337 21-337 21-337
$
179.95 179.95 $179.95 $179.95
21-338
$
269.95
21-337
$
269.95
179.95
21-338 21-338 21-338 21-338 21-338
$
21-337 21-337 21-337 21-337 21-338
$
21-337 21-338 21-337 21-337
$
$ $
$
21-421T 21-421T 21-421T 21-421T 21-421T 21-421T
$
109.95
21-421T
$
21-421R 21-421R 21-424R 21-421R 21-421R 21-421R 21-421R 21-421R
$
179.95 $179.95
269.95 269.95 $269.95 $
(Shown 21-338)
AT V ACCESSORIES
109.95 $109.95 $109.95 $109.95 $109.95 $109.95 $109.95
$
$
$
$
Vantage Boards
KAWASAKI VN900 (Passenger) VN1500 Vulcan Classic (Passenger) VN1600 (Passenger) (Not Nomad) VN1700 (Passenger) VN2000 (Passenger)
269.95 $269.95 $269.95 $269.95 $269.95
The Vantage Boards pull out all the stops in style, function and finish. These Boards are created to fulfill the demands of motorcyclists looking for unparalleled style and comfort at a fair price. Built tough from CNC finished aluminum and coated with brilliant chrome, the Vantage Boards accent your motorcycle with elegant styling, superior fit and finish. Vantage Board shown with option 21-312 stepped off-set extension. Dimension 6-1/4” x 4” x 1”.
SUZUKI C50 2006-2009 (Passenger) M50 (Passenger) M50 2005-2006 (Driver) VL800/C50 2001-2005 (Passenger) VL1500
21-821R 21-821R 21-523R 21-421R
$
21-421R 21-421R 21-421R 21-421R 21-421R
$
109.95 109.95 $109.95 $109.95
21-421T
$
109.95 109.95 $109.95 $109.95 $109.95
21-421T 21-421T 21-421T 21-421T 21-421T
$
$
179.95
269.95 269.95 $269.95 $269.95 $269.95 $
YAMAHA $
179.95 179.95 $179.95 $179.95 $179.95 $
269.95 269.95 $269.95 $269.95 $
GENERAL ACCESSORIES
V Star 950 (Passenger) V Star 1100 Custom (Driver) V Star 1100 Custom/Classic (Passenger) V Star 1300 (Passenger) XV 1600/XV 1700 (Passenger)
CAN AM ACCESSORIES
109.95
21-421T 21-421T (pass) 21-421T
LIGHTING
269.95
LICENSE PLATE ACCESSORIES
$
$
FLAGS & FLAG POLE MOUNTS
21-338
TOURING ACCESSORIES
VT1100 Sabre/Spirit (Driver/Passenger) VT1100 CR European Model only 1994 (Passenger) VT1300 S/R/T VTX1300 2004-2009 (Passenger) VTX1300C 2004-2009 (Passenger) VTX1800 C/F (Driver) VTX1800 2002-2004 (Passenger) VTX1800C 2002-2004 (Passenger) VTX1800 R/S 2002-2003 (Passenger) VTX1800 2005-2009 (Passenger)
109.95
CRUISER ACCESSORIES
21-928R
Most All
WINDSHIELDS
MSRP
CruisTM Board Passenger
MSRP LUGGAGE & BAGS
Fitment
Fitment
COVERS
Mini-Board Replacement Rubber (Shown 21-421R)
AUDIO
PASSENGER & DRIVER BOARDS
* Choose the style you want to be paired with a 1/2” male mount for Harley-Davidson fitments. All pegs D.S. Patent #1.161.859
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
7
HIGHWAY PEGS
Pegs, Boards, Grips
> All kits come complete with peg, stem, or clamp.
RAIL: 5-1/2” x 2” x 1-1/4” (Shown 21-352J)
TEARDROP: 5-1/2” x 2” x 1-1/4” (Shown 21-521L)
DIAMOND: 5-1/2” x 2” x 1-1/4” (Shown 21-521K)
FLAME: 5-1/2” x 2” x 1-1/4” (Shown 21-521P)
Fitment
CELESTAR: 5-1/2” x 2” x 1-1/4” (Shown 21-521Q)
MINI BOARD: 6-1/2” x 5-3/4” x 1-1/2” (Shown 21-251R)
Rail
Diamond
Teardrop
Flame
Celestar
Universal 1” Highway Clamp
21-521J
21-521K
21-521L
21-521P
21-521Q
MSRP
Mini Board
189.95
21-521R
$
Universal 1-1/4” Highway Clamp
21-303J
21-303K
21-303L
21-303P
21-303Q
$
GL1500/6 Gold Wing (Driver) Valkyrie (Driver) V Star 650 Classic/Custom (Driver) V Star 1100 Custom (Driver)
21-352J
21-352K
21-352L
21-352P
21-352Q
$
169.95
21-303R
$
149.95
21-352R
$
$
MSRP 189.95 199.95 149.95
* All Pegs D.S. Patent #6.161.859
(Shown 21-303B)
(Shown 1-305J)
Cruis Boards
Valkyrie Case Guard Pegs
Non-folding Highway Board that provides excellent comfort for the long hauls. Kit comes complete with everything you need to install. Dimension 6-1/2”L x 5-3/4”W x 1-1/2”H.
1-1 ⁄8” case guard pegs for Valkyrie and Valkyrie Tour (not Interstate). Description
Part No.
Unit
Fitment
Part No.
Unit
MSRP
Rail Peg
1-305J
Pair
$
Fits 1” Bars
21-330C
Kit
$
189.95
Diamond Peg
1-305K
Pair
$
Fits 1-1/4” Bars
21-303B
Kit
$
189.95
Teardrop Peg
1-305L
Pair
$
VT750 ACE Shadow 1998-1999 Passenger
21-553B
Kit
$
159.95
Flame Peg
1-305P
Pair
$
8
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP 135.95 135.95 135.95 135.95
AUDIO
HIGHWAY BOARDS
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS
Highway Clamp with Rail Peg
Part No.
Unit
Fits 1-1/4” Highway Bars/ Engine Guards
21-334
Pair
MSRP 139.95
$
1” chrome steel trim plug. Fits anti-rotation extension piece. Used with 21-310. Unit
3-103
Pair
MSRP $
The Vantage Boards pull out all the stops in style, function and finish. These highway boards are created to fulfill the demands of motorcyclists looking for unparalleled style and comfort at a fair price. Built tough from CNC finished aluminum and coated with brilliant chrome. The Vantage Boards accent your motorcycle with elegant styling, superior fit and finish. Dimension 6-1/4” x 4” x 1”. BBP #21-310, 21-312, & 21-314 Extensions work with both #21-335 & 21-336. Fitment
Part No.
Comes With 1” Bar Clamp For 1” Highway Bars
21-335
Comes with 1-1/4” Bar Clamp For 1-1/4” Highway Bars
21-336
Unit
MSRP
Kit
$
269.95
Kit
$
269.95
CAN AM ACCESSORIES
Part No.
Vantage Boards
TOURING ACCESSORIES
Trim Plugs
Shown 21-336
CRUISER ACCESSORIES
Fitment
4.95
AT V ACCESSORIES
1 21-467 1 21-468 1 21-469
FLAGS & FLAG POLE MOUNTS
21-310
Unit
MSRP
21-467
Kit
2 Extension Only
21-310
Pair
$
921467P
Pair
$
Replacement Pads For; 21-467, 21-468, 21-469
259.95 39.95
15.95
Folding Highway Board with 21-312 stepped off-set extension and 1” Posi-lock™ case guard clamp. Complete kit with everything you need. Extension dimension 2-1/2” L with 1-1/2” offset. Fitment
Part No.
1 Highway Board Kit
21-468
Unit Kit
2 Extension Only
21-312
Pair
$
Folding Highway Board with 21-314 stepped off-set extension and 1” Posi-lock™ case guard clamp. Complete kit with everything you need. Extension dimension 5” L with 1-1/2” offset.
MSRP
Fitment
Part No.
259.95
1 Highway Board Kit
21-469
Kit
2 Extension Only
21-314
Pair
$
39.95
www.bigbikeparts.com
2
Highway Boards with Longer Off-Set Extension
•
Unit
MSRP $
289.95
E-mail us info@bigbikeparts.com
$
89.95
9
GENERAL ACCESSORIES
1 Highway Board Kit
$
2
Highway Boards with Stepped Off-Set Extension
LIGHTING
Part No.
LICENSE PLATE ACCESSORIES
Folding Highway Board with 21-310 straight offset extension and 1” Posi-lock™ case guard clamp. Complete kit with everything you need. Extension dimension 1-1/2” L with 1-1/8” offset. Fitment
21-314
21-312
2
Highway Boards with Straight Off-Set Extension
WINDSHIELDS
The billet aluminum Highway Clamp with Rail Peg has a pivoting foot peg for folding the pegs out of the way when they are not in use. Fits Show Chrome Accessories® Highway Bars (see page 48), OEM and aftermarket 1-1/4” Highway Bars/Engine Guards.
FLOORBOARDS + BRAKE/SHIFTER COVERS
Pegs, Boards, Grips 1
2
1
Brake Pedal Cover
Die-cast brake pedal cover, dynamically designed with a V-style rubber pad. Replaces the rubber boot on the brake pedal. Easily slides on and secures with a set screw. Approximate size 5-1/2” x 2-1/2”. Fitment
Part No.
Unit
MSRP
Honda VTX1300/1800 Retro
21-555
Each
$
24.95
Chrome & Rubber Floorboards 2
Forged aluminum boards in the V-style design. Replaces OEM boards using OEM hardware. Dimension 11-1/2” x 4-1/2” x 3/4”. Fitment
Part No.
Honda VTX1300 Retro 2003-2008/1800 21-554 Retro 2002-2008
Unit Pair
MSRP 199.95
$
Shifter Peg Cover
This die-cast shifter cover contains inlayed rubber and is held on with set screws that slide over the existing rubber shifter. Cover fits 7/8” round shifter. Approximate size 1-1/2” x 2-1/2”. Fitment
Part No.
Unit
MSRP
Honda GL1800, VT750 ACE & Spirit, VT1100 Shadows & Volusia VL800.
21-556
Each
$
39.95
Ribbed Brake Pedal Cover Fits Honda GL1500 Gold Wing, Valkyrie, VT750 Aero & Spirit, Show Chrome Accessories® Tour Floorboards (2-488) and Markland floorboards. Dimension 3” x 2-1/2”. Fitment
Part No. Unit MSRP
Honda GL1500 Gold 1-328 Wing, Valkyrie, VT750 Aero, Phantom, RS & Spirit
10
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Each $39.95
Tour Floorboards This design incorporates the same 1” size tubing as used on the engine case guard, giving the Honda GL1500/6 Gold Wing true style and comfort. Incorporates new brake pedal and heel toe shifter. Dimension 9-3/4” x 4-1/2” x 5/8”. Fitment
Part No.
Unit
Honda GL1500/6 Gold Wing 1988-2000 2-488 Kit Replacement Pad Left 902488LP Each Replacement Pad Right
902488RP Each
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP
$
399.95 7.95
$
7.95
$
PEGS, BOARDS & GRIPS
Slider Brake > Pedals
TEARDROP: 5-1/2” x 2” x 1-1/4” (Shown 21-551L)
FLAME: 5-1/2” x 2” x 1-1/4” (Shown 21-551P)
LUGGAGE & BAGS
DIAMOND: 5-1/2” x 2” x 1-1/4” (21-551K)
COVERS
Slider Peg styles are available in a single brake pedal fitment. See Slider Brake Pedal Fitment chart below for application. RAIL: 5-1/2” x 2” x 1-1/4” (Shown 21-551J)
AUDIO
BRAKE PEDAL SLIDERS + COVERS
Teardrop
Flame
Celestar
MSRP
GL1800 Gold Wing
21-551J
21-551K
21-551L
21-551P
21-551Q
$
49.95
Road Star, Royal Stars, V Star 1100 Classic
21-602J
21-602K
21-602L
21-602P
21-602Q
$
59.95
Valkyrie/GL1500/6 Gold Wing VT600 Shadow/VF750 Magna VT750 Phantom, RS VT1100 Shadow/Includes Sabre V Star 650 Classic/Custom V Star 1100 Custom
21-451J
21-451K
21-451L
21-451P
21-451Q
$
49.95
TOURING ACCESSORIES
Diamond
CRUISER ACCESSORIES
Rail
WINDSHIELDS
Fitment
CELESTAR: 5-1/2” x 2” x 1-1/4” (Shown 21-551Q)
Shown 21-451Q
* All Pegs D.S. Patent #6.161.859
CAN AM ACCESSORIES
Teardrop Brake Pedal Cover
Fitment
AT V ACCESSORIES
Incorporates the teardrop design on the sides. Mounts with set screws provided. Dimension 2-3/4” x 2”. Part No. Unit MSRP Each $34.95
53-700
Each $34.95
Honda VT600 1988-2006 & VT1100 1987-2006
FLAGS & FLAG POLE MOUNTS
Honda VT750 ACE 1998-2003 53-407
LICENSE PLATE ACCESSORIES
Brake Pedal Cover
Comfort Brake Pedal Cover
Fitment
Part No. Unit MSRP
Fitment
Part No. Unit MSRP
Kawasaki VN1500P/ VN1600P, Suzuki VZ1600/ M95 & Marauder
81-112
Honda VT600 1998-2008, VT750/Aero, Phantom, R/S & VT1100 1992-2008
53-147
Comfort Brake Pedal Cover for Honda VT600, VT1100, & VT750 Aero.
•
Each
$
E-mail us info@bigbikeparts.com
34.95
11
GENERAL ACCESSORIES
Each $34.95
www.bigbikeparts.com
LIGHTING
This chrome plated brake pedal cover adds more style to the OEM brake pedal. Cover installs over existing OEM pedal with hardware provided. Approximate size 3-1/2” x 2”.
G R I P S + W R I S T C R U I S TM
Pegs, Boards, Grips
17-120
Diamond Grips
17-121
Chrome grips with black diamond inserts.
17-120 shown with handlebar weights
NEW SOLACE Rubber Grips Non-Heated
Fitment
TM
The new Solace™ Grips combine the right amount of chrome to give rubber grips a good name. They are made from highly durable TPR rubber with a cushy feel and contoured finger design. A contoured chrome trim encases the raised thumb position area, adding not only comfort but style. The end is finished with a decorative chrome trim piece that can be removed for open ended grip needs. The new Solace™ Grips are available for either 7/8” or 1” bars and will fit closed or open end bar installations. Fitment
Part No. Unit MSRP
Fits Most 7/8” Bars x 6” Long
17-120
Pair
$
49.95
Fits Most 1” Bars x 5” Long
17-121
Pair
$
49.95
Part No. Unit MSRP
Honda Cruisers with 1” & 1-1/8” 17-111 inside diameter, 5-1/2” inside length bars
Pair
$
39.95
Gold Wing 1200/1500 with 7/8” & 17-114 1” inside diameter, 5-1/2” inside length bars
Pair
$
39.95
1
Edge Grips Chrome grip set with a unique feel of chrome and black rubber. Fitment 2 1
Part No. Unit
Cruisers with 1” & 1-1/8” 17-113 inside diameter, 5-1/2” inside length bars
Pair
MSRP $
69.95
Chrome Comfort Grips (Non-Heated)
Chrome Comfort Grips are extremely durable and chrome plated for a first class look. These vibration dampening grips are ergonomically designed with a convex profile to fit the cup of your hand. The symmetrical rubber pattern provides you with total grip comfort, reduces numbness, vibration and wrist fatigue in any position on the grip. Comfort Grips are easy to install and utilize OEM throttle tubes. For extra comfort use the Comfort Wrist Cruis™ BBP # 17-379C. BBP Grip Glue included. Fitment
Part No. Unit
MSRP
Honda GL1800 2001-2008 (Open Ended For Dampeners). For 7/8” x 5-1/2” inside bar length (non OEM Heated)
17-362
Pair
$
Honda Cruiser For 1” x 5-1/2” Bars.
17-371
Pair
$
Kawasaki (not VN900), Suzuki & Yamaha without handlebar weights. For 1” x 5-1/4” Bars. 17-373
Pair
$
Honda VT1300, Harley-Davidson without Electronic Throttle. For 1” x 5-1/8” Bars
17-374
Pair
$
Honda GL1200, GL1500, ST1300 Standard. For 7/8” x 5-1/2” Bars.
17-375
Pair
$
Kawasaki, Suzuki & Yamaha (Open Ended). For 1” x 5-1/2” Bar with up to 1” weights
17-376
Pair
$
2
Comfort Wrist Cruis
TM
79.95 79.95 79.95 79.95 79.95
Part No.
Unit MSRP
Compatible with BBP Comfort Grips (17-371, 17-373, 17-374, 17-375, 17-381, 17-383, 17-384, & 17-385)
17-379C
Each
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
19.95
$
17-83
Deluxe Foam or Leather Grips
Quality black leather or foam grips with Show Chrome Accessories® ABS end caps. For 7/8” & 1” inside diameter; 5-3/4” inside length bars. Fitment
(Fits left and right side)
Fitment
12
17-93
79.95
Part No. Unit MSRP
Honda Gold Wing 1981-2000 (foam) 17-93
Pair
$
24.95
17-83
Pair
$
34.95
Honda Gold Wing 1981-2000 (leather)
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
NEW Rubber Heated Grip Here 17961
NEW Inferno Heated Grips with E-Z Controller TM
Unit
4-136
Each
MSRP $
Comfort Wrist Cruis TM
(Fits left and right side) 19.95
$
Part No. Unit MSRP
Fits Honda Goldwing GL1800, GL1500 Open and Closed Ended
17-961
$
89.95
Heated Chrome Comfort Grips
Controller Style Part No. Unit MSRP B
Honda GL1800 HP Models 2006-2010 (No Controller). For 7/8” x 5-1/2” Bars
17-380
Pair
$
129.95
17-382
Pair
$
129.95
A
17-381
Pair
$
Kawasaki (not VN900), Suzuki & Yamaha without handlebar weights. For 1” x 5-1/4” Bars.
A
17-383
Pair
$
179.95
Honda VT1300, Harley-Davidson without Electronic Throttle. For 1” x 5-1/8” Bars
A
17-384
Pair
$
Honda GL1200, GL1500, ST1300 Standard. For 7/8” x 5-1/2” Bars.
C
17-385
Pair
$
179.95 179.95 129.95
Heated Grips are a perfect way to keep your hands warm while riding during cold weather. Select models available with standard black or chrome control housings. Comfortable, warm, durable non-slip grips allow the rider to vary the degree of warmth with 4 level heat controller. Easy installation. Fitment
Controller Housing Part No. Unit Pair
$
Honda Cruisers (closed end). For 1” x 5-1/2” L Bars
Chrome
17-952C
Pair
$
Honda GL1200, GL1500(closed end), ST1300. For 7/8” & 1” x 5-3/4” Bars
Chrome
17-951
Pair
$
Most Cruisers, Kawasaki (not Vn900), Suzuki & Yamaha (closed end). 1” x 5-1/2”L Bars
Chrome
17-955C
Pair
$
Most Cruiser/Street Motorcycles (closed end). For 7/8” & 1” x 5”L Bars
Black
17-954
Pair
$
ATV/Snowmobile (closed end). For 7/8” x 5”L Bars
Black
17-990
Pair
$
79.95 79.95 79.95 79.95 79.95
74.95
NOTE: ALL GRIPS UTILIZE OEM THROTTLE TUBE FOR TWIST THROTTLE. (except ATV/Snowmobile #17-990)
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
13
GENERAL ACCESSORIES
17-953
LIGHTING
Black
Harley-Davidson without Electronic Throttle. For 1” x 5-1/8” L Bars
SHOWN: CHROME HOUSING PART#17-952C
MSRP
LICENSE PLATE ACCESSORIES
Heated Rubber Grips with Controllers
FLAGS & FLAG POLE MOUNTS
Honda Cruiser For 1” x 5-1/2” Bars.
AT V ACCESSORIES
Honda GL1800 2001-2008 (Open Ended For Dampeners). For 7/8” x 5-1/2” inside bar length (non OEM Heated)
CAN AM ACCESSORIES
Our heated chrome Comfort Grips are extremely durable and ergonomically designed to provide you total grip comfort to reduce numbness, vibration and wrist fatigue in any position. Comfort Grips are easy to install and utilize OEM throttle tubes and come with a variable position switch giving the rider ultimate control over the degree of heat produced. The control switch for cruisers easily installs on any 1” handlebar in a convenient position of the rider’s choice. The GL1800 version plugs into the OEM adaptor and the GL1500 model adheres to the fairing or other flat surface. Comfort Heated Grips draw 2.7 - 3.2 amps on high. For extra comfort use Comfort Wrist Cruis™ (17-379C). BBP Grip Glue included. Fitment
Controller Style C: GL1500, GL1200/ST1300
Set
TOURING ACCESSORIES
Controller Style A: Cruisers
Fitment
CRUISER ACCESSORIES
Part No. Unit MSRP
Compatible with BBP Comfort 17-379C Each Grips (17-371, 17-373, 17-374, 17-375, 17-381, 17-383, 17-384, & 17-385)
WINDSHIELDS
The Inferno™ Grips are made from extremely durable TPR rubber for easy grip and maximum heat. Standard room temperature operation is at 170°F which provides extremely comfortable heat when riding in the cold. Multiple textures and patterns in the rubber provide a comfortable grip and soothing style. The Inferno™ grips are designed to work with both open and closed end applications with a pre-scored cut out end plug. The E-Z™ temperature controller is easy to use and provides the most function available. Single button control provides 5 pre-set heat settings. New smart logic design allows the activation of on optional battery saver mode which will turn off the grips if the battery voltage falls below 12.5 volts. Fits 7/8” x 5 ¾” for 7/8” bars such as the GL1200, GL1500, GL1800 Goldwings and others.
3.95
LUGGAGE & BAGS
TM
Part No.
Controller Style B: GL1800
COVERS
Big Bike Parts® high temperature grip glue is a heavy gel that has a high temperature tolerance as well as a low cold crack rating to provide a secure grip in all weather riding conditions. Holds securely to medium and soft compound rubbers and plastic grips. 1/4oz. container.
Fitment
PEGS, BOARDS & GRIPS
Big Bike Parts Gel Grip Glue
AUDIO
GRIPS
MOTORCYCLE COVERS
UltraGard The Classic Series ®
Classic Series Features The Classic Series line of covers offers exceptional value without compromising the features you have come to expect from UltraGard®. Whether you need to cover a large touring, bagger, trike, can-am, cruiser, street bike, scooter or a trailer, the Classic Series is a great value. • Tailor fit designs take into account the natural stance of your motorcycle. • Heavy duty water resistant polyurethane coated polyester provides excellent protection against weather, dirt and pollution. • UV stabilized to maximize fabric life and minimize color fading from sun exposure. • Scorch resistant heat shield protects the cover from hot exhaust pipes and allows use of cover immediately after riding. • Double stitched, four fold interlocking seams to provide the best durability and a water tight closure. • Zippered windshield and sissy bar pockets on cruiser covers expand to fit many bike configurations. • SoftTek windshield liner to prevent scratching. • Large rust-proof grommets prevent tearing. • Sewn elastic hem and bungee cord ensures a tight custom fit. • High visibility reflective logo adds safety while parked. • Convenient and compact storage pouch is easily portable. • Five year warranty.
4-444AB
4-472AB
4-465AB
See page 17 for full fitment chart. Description
Color
Touring Cover
Black/Charcoal
Fitment Part No. Unit LT
4-444BC Each
MSRP $
55.95
Touring Cover
Charcoal/Black
LT
4-444CB Each
$
55.95
Touring Cover
Cranberry/Black
LT
4-444AB Each
$
55.95
Dresser Cover
Black/Charcoal
XL
4-472BC Each
$
74.95
Dresser Cover
Charcoal/Black
XL
4-472CB Each
$
Dresser Cover
Cranberry/Black
XL
4-472AB Each
$
Trike Cover
Black/Charcoal
T
4-465BC Each
$
Trike Cover
Charcoal/Black
T
4-465CB Each
$
Trike Cover
Cranberry/Black
T
4-465AB Each
$
NEW Can-Am Cover Fits RT
Black/Charcoal
RT
4-475BC Each
$
Large Cruiser Cover
Black/Charcoal
L
4-459BC Each
$
55.95
Large Cruiser Cover
Charcoal/Black
L
4-459CB Each
$
55.95
Large Cruiser Cover
Cranberry/Black
L
4-459AB Each
$
55.95
Medium Street Cover Fits 125cc to 750cc
Black/Charcoal
M
4-443BC Each
$
45.95
Medium Street Cover Fits 125cc to 750cc
Charcoal/Black
M
4-443CB Each
$
45.95
Medium Street Cover Fits 125cc to 750cc
Cranberry/Black
M
4-443AB Each
$
45.95
Small Scooter Cover
Charcoal/Black
S
4-481CB Each
$
39.95
Small Scooter Cover
Cranberry/Black
S
4-481AB Each
$
39.95
Touring Half Cover Fits GL1200, GL1500, GL1800, Valkyrie, Yamaha, Venture, Harley Classics, etc.
Black
H
4-458BK Each
$
35.95
Touring Half Cover Fits GL1200, GL1500, GL1800, Valkyrie, Yamaha, Venture, Harley Classics, etc.
Gray
H
4-458G Each
$
35.95
Touring Half Cover Fits GL1200, GL1500, GL1800, Valkyrie, Yamaha, Venture, Harley Classics, etc.
Cranberry
H
4-458A Each
$
35.95
Cruiser Half Cover Fits 600cc Cruisers & up
Black
HC
4-456BK Each
$
35.95
Cruiser Half Cover Fits 600cc Cruisers & up
Gray
HC
4-456G Each
$
35.95
Cruiser Half Cover Fits 600cc Cruisers & up
Cranberry
HC
4-456A Each
$
35.95
Trailer Cover: Fits approximate trailer size up Black/Charcoal to 32”H x 70”L x 48”W
TC
4-491BC Each
$
29.95
Trailer Cover: Fits approximate trailer size up Cranberry/Black to 32”H x 70”L x 48”W
TC
4-491AB Each
$
29.95
14
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
4-443AB
74.95 74.95 79.95 79.95 79.95 79.95
4-458A
4-456A
4-481AB
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
AUDIO
MOTORCYCLE COVERS
PEGS, BOARDS & GRIPS
E x c e p t i o n a l V a l u e W i t h N o C o m p r o m i s e s.
COVERS LUGGAGE & BAGS
UltraGard® Classic Series Color Availability 4-491BC
Charcoal/Black
WINDSHIELDS
Black/Charcoal
Cranberry/Black
CRUISER ACCESSORIES TOURING ACCESSORIES CAN AM ACCESSORIES AT V ACCESSORIES FLAGS & FLAG POLE MOUNTS
(4-459BC shown)
LICENSE PLATE ACCESSORIES LIGHTING
www.bigbikeparts.com
GENERAL ACCESSORIES
(4-475BC shown)
•
E-mail us info@bigbikeparts.com
15
T R A N S P O R T O R TM C O V E R S
Transportor Series TM
Transportor Touring Cover Features TM
4-894G
Transportor TM covers are designed and engineered to withstand highway speeds with confidence while trailering your touring motorcycles and ATV’s. • • • • • • • • • •
Exclusive fit for Honda Gold Wing GL1500/GL1800. Water resistant heavy duty polyurethane coated polyester, protects against elements travelers encounter while on the road to their destination. Trailerable cover & storage cover in one. Exclusive heavy duty multi-layer protective liner prevents scratching. Securing straps with quick release buckles are engineered specifically to reduce buffeting. Four reinforced tie down slots allow access to anchor points to properly secure the motorcycle to the trailer. Scorch resistant heat shields protect the cover from hot exhaust pipes and allows use of cover immediately after riding. Highly visible reflective logo adds safety while parked. Convenient storage pouch with compression cinch straps is easily portable. Five year warranty.
Description TransportorTM Touring Cover
Color Charcoal
Fitment Part No. Unit LT
4-894G
Each
MSRP 179.95
$
Transportor ATV Cover Features TM
• • • • • • • • • • •
4-890G
Water resistant heavy duty polyurethane coated polyester, protects against the elements travelers encounter while on the road to their destination. Trailerable cover & storage cover in one. Securing straps with quick release buckles are engineered specifically to reduce buffeting. Six reinforced tie down slots allow access to anchor points to properly secure the ATV to the trailer. Exclusive front cut-out for most snowplow and winch attachments. Scorch resistant heat shield protects the cover from hot exhaust pipes and allows use of cover immediately after riding. Highly visible reflective logo adds safety while parked. Front fuel access panel let’s you fuel up while secured on the trailer. Convenient storage pouch is easily portable. Cover measures 47” W x 82” L x 46” H Five year warranty.
Description TransportorTM ATV Cover
Color Charcoal
Fitment Part No. Unit MSRP MU
4-890G
Each
99.95
$
TransportorTM ATV Cover Features
Heat Shield
16
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Fuel Access Panel
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
CROSS REFERENCE FITMENT
S-SCOOTER
Black Gray Cranberry
Blue/Black Charcoal/Black Cranberry/Black
4-443BC 4-443CB 4-443AB
$
L-CRUISER Black/Charcoal Charcoal/Black Cranberry/Black
4-459BC 4-459CB 4-459AB
$
45.95 $ 45.95 $ 45.95 49.95 49.95 $ 49.95 $ $
MU MU MU MU MU MU
BRP
Black/Charcoal Charcoal/Black Cranberry/Black
MU MU MU MU MU MU MU
HONDA
LT-TOURING
MU MU MU MU MU MU MU
Brute Force 650/750 KFX400/700 Prairie 360/700
MU MU MU
POLARIS
SUZUKI MU MU MU MU MU MU
YAMAHA MU MU MU MU MU MU
$
Black/Charcoal Charcoal/Black
4-465BC 4-465CB
$
Black/Charcoal
4-475BC
$
4-491BC 4-491AB
$
Black/Charcoal Cranberry/Black
79.95 79.95
MOTORCYCLE FITMENT CONT. Description Size
SCOOTER FITMENT CONT. Description
Raptor 660R/700T Wolverine 350/450 YZF450
MU MU MU
Voyager Vulcan 750/800/900 Vulcan 1500/1600/2000
HONDA
MOTORCYCLE FITMENT Description
Size
F650/CS/GS K1200GT/RS/S K1200LT R1100RT R1150RT/GS R1200C/CE
M XL, H XL M M HC, M
BMW R1200C/CE R1200GS R1200RT R1200S/ST
HC, M M M, H M
HARLEY-DAVIDSON FLHR Road King FLHT/X Electra Glide FLHTC/CU Electra Glide/Ultra FLST Softail FLTR Road Glide FXD Dyna FXDWG Dyna Wide Glide FXST Softail VRSC V-Rod ALL XL Sportster ALL
HC, L XL XL, H HC, L XL, H HC, L HC, L HC, L HC, L HC, M
HONDA 1100 Shadow ALL 250 Nighthawk 250 Rebel 600 Shadow 750 Magna 750 Shadow ACE/Aero 750 Shadow Spirit 750 Phantom/RS 1500 Valkyrie 1500 Valkyrie Interstate CBR ALL GL1000 Gold Wing GL1100/1200 Gold Wing GL1500 Gold Wing GL1800 Gold Wing ST1100/1300 VTX1300/1800 VT1300 Fury VT1300 Interstate/Stateline/Sabre
HC, L M M HC, M HC, M HC, L HC, M HC, M L XL, H M L LT, H LT, H LT, H H HC, L HC, L HC, L
KAWASAKI Concourse Meanstreak Ninja ALL
M HC, L M
H, LT HC, L HC, L
SUZUKI M HC, L HC, L HC, M HC, L M M M HC, L HC, L M HC, L
TRIUMPH America/Speedmaster Bonneville ALL Daytona ALL Legend Rocket III Speed Triple/Speed Four Sprint ST Thunderbird Tiger
HC, L M M M HC, L M M M M
VICTORY Hammer ALL Kingpin Kingpin Tour V92C Vegas ALL
HC, L HC, L HC, XL HC, L HC, L
YAMAHA 250/535 Virago 700/1100 Virago FJR1300 FZ1/FZ6 Road Star ALL Roadliner/Stratoliner Royal Star Royal Star Tour Deluxe Royal Star Venture V-Max VStar 650/950/1100/1300 Warrior YZF-R1/R6
M L XL, H M HC, L HC, L L HC, XL XL, H M HC, L HC, L M
SCOOTER FITMENT Description
Size
APRILIA Scarabeo 50/125 SR 50
www.bigbikeparts.com
S S •
29.95 29.95
$
Size
Bandit ALL Boulevard C50/C90 Boulevard M50/M95/M109 Boulevard S40 Boulevard S50/S83 DL650/DL1000 GSXR ALL Hayabusa Intruder VL1500 Intruder VS800/VS1400 SV650/SV1000 Volusia VL800
$
$
ATV FITMENT CONT. Description
BMW
79.95
TC-TRAILER
Big Ruckus Elite 50/80 Helix Metropolitan Reflex Ruckus Silver Wing
Size M S M S M S M
KYMCO Cobra Cross/Racer Filly Grand Vista 250 People 50/150 Super 9 Vitality Xciting 250/500 ZX 50
S S M S S S M S
SUZUKI Burgman 400 Burgman 650
M M
VESPA ET2/ET4 Grandturismo 200
S M
YAMAHA Majesty 400 Riva Jog/Razz Vino XC125
M S S S
TRIKE FITMENT Can-Am Spyder RT Champion Sidecar DFT Hannigan Lehman Motor Trike Trike Shop (Not Roadsmith)
TRAILER FITMENT Description
RT T T T T T T
Size
BUSHTEC Quantam Series
TC
CHAMPION Colorado Sport
TC
ESCAPADE Elite LE SE
TC TC TC
HANNIGAN Sierra
E-mail us info@bigbikeparts.com
TC
17
GENERAL ACCESSORIES
Banshee Big Bear 400 Bruin 250 Bruin 350 Grizzly 660 Kodiak 400/450
99.95
4-890G
T-TRIKE
79.95
4-465AB
RT Trike
LIGHTING
Eiger 400 King Quad 700 Quad Racer R450 Quad Sport Z400 Twin Peaks 700 Vinson 500
Charcoal
Cranberry/Black
LICENSE PLATE ACCESSORIES
MU MU MU MU MU MU MU MU
MU-ATV
CROSS REFERENCE FITMENT 55.95 $55.95 $55.95 $
FLAGS & FLAG POLE MOUNTS
Hawkeye Magnum 330 Outlaw Predator 500 Scrambler 500 Sportsman 450/500 Sportsman 700/800 Trail Boss 330
179.95
$
4-444BC 4-444CB 4-444AB
AT V ACCESSORIES
KAWASAKI
4-894G
74.95 $74.95 $74.95
Black/Charcoal Charcoal/Black Cranberry/Black
CAN AM ACCESSORIES
Foreman Rancher Recon Rincon Rubicon TRX400EX TRX400R
$
CROSS REFERENCE FITMENT
TOURING ACCESSORIES
DS250/DS650 Outlander 400/500 Outlander 650/800 Quest 500/650 Rally 200 Renegade Traxter
4-472BC 4-472CB 4-472AB
$
CRUISER ACCESSORIES
250 400 500 650 700 DVX400
$
WINDSHIELDS
ARCTIC CAT
35.95 35.95 $35.95
4-456BK 4-456G 4-456A
LUGGAGE & BAGS
Size
$
XL-BAGGER
Charcoal
ATV FITMENT Description
$
HC-HALF COVER CRUISER Black Gray Cranberry
Cover Fitments
35.95 35.95 $35.95
4-458BK 4-458G 4-458A
COVERS
$
M-STREET Black/Charcoal Charcoal/Black Cranberry/Black
39.95 39.95 $39.95
4-481BB 4-481CB 4-481AB
H-HALF COVER
PEGS, BOARDS & GRIPS
CROSS REFERENCE FITMENT Description Pt No. MSRP
AUDIO
U LT R A G A R D ® F I T M E N T C H A R T
S A DF D LL OE OB R AB GO A+ R TD RS U +N K B RLAI K N E R+S S H I F T E R C O V E R S
Audio Luggage & Bags Hopnel Saddlebag Liners TM
HSL
Hopnel™ Saddlebag Liners are just the right size for any touring motorcycle. Built to last, the liners are designed to make loading and unloading a breeze and are made of sturdy urethane coated weather resistant polyester. The convenient carrying handles make the liners versatile and user friendly.
UltraGard Deluxe Saddlebag Liner ®
HCSL
Fitment
Dimensions
Part No. Unit
MSRP
890 Saddlebag Liner. Fits Honda Gold Wing GL1200/1500/1800
20.5” x 11.5” x 6.5”
HSL
Each
$
NEW 850 Saddlebag Liner. Fits Can Am Hard Bags
15” x 10.75” x 9.25
HCSL
Each
$
750 Saddlebag Liner. Fits hard bags on Honda, Harley-Davidson, Kawasaki, & Yamaha Tour
20.5” x 10.5” x 6.5”
HDSL
Each
$
510 Saddlebag Liner. Fits Harley-Davidson Leather Bags
17.5” x 11.25” x 5.25”
HDSL-H Each
$
19.95 19.95 19.95 19.95
Hopnel Tour Trunk Liner TM
Hopnel Trunk Liners are a great addition for any touring motorcycle, making loading and unloading a breeze. Made of sturdy urethane coated weather resistant polyester, these bags are built to last. The convenient carrying handles make the liners versatile and user friendly. Dimension: HTL: 21.5” x 12” x 11.5”. Dimension: HCTL: 15.75” x 10” x 8” & 10.75” x 7.25” x 7” ™
Fitment
Part No. Unit MSRP 19.95
1700 Trunk Liner. Fits Honda, Harley-Davidson, Kawasaki, & Yamaha Tour
HTL
Each
$
NEW 1100 Trunk Liner Set. Fits Can Am RT
HCTL
Set
$
24.95
UltraGard® Deluxe Saddlebag Liner features water resistant heavy duty polyester in universal sizes that fit most large hard saddlebags. Features include: two large external zippered pockets for storage, two inner compartments for storing smaller items and comfortable padded carrying handles and shoulder strap. Dimensions 20”L x 10”H x 6.5”W. Fitment
Part No. Unit
American Touring Saddlebags. (Harley- 4-602 Davidson) American Touring Medium Deluxe Saddlebag Liner
Each
MSRP $
29.95
Hopnel King Kooler Saddlebag Liner TM
TM
Hopnel™ King Kooler™ is an insulated, waterproof liner that fits into most large cruiser saddlebags. Turn saddlebags into an insulated cooler. Ideal to fill with cold beverages for that hot dusty road, picnic or party. Dimensions 16.5”L x 10”H x 5”W. Fitment
Part No. Unit
480 Saddlebag Kooler. Fits hard HDKC saddlebags on Honda Harley-Davidson, Kawasaki, & Yamaha Tour
Each
MSRP $
39.95
Hopnel Cubby Stuff Sacs TM
TM
Hopnel™ Cubby Stuff Sacs™ are ideal for quick packing of large to small items in saddlebags or trunk. Sacs close securely with drawstring and barrel lock and are made of durable rip-stop polyester so they will not wear or tear easily. Cubby Stuff Sacs™ come as a set of 3 Sacs. Sac sizes include, one 4.5” x 8.5”, one 5.5” x 11.5” and one 7.75” x 13.5”. Fitment
Part No.
Universal Fit
4-250
Unit
Set of 3
GREAT SAC FOR YOUR RAIN GEAR!
18
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP
10.95
$
UltraGard Helmet Bag
AUDIO
RACK & HELMET BAGS
®
TM
H50-106BK
Each
$
24.95
CAN AM ACCESSORIES
Most Tour Racks
Each
TOURING ACCESSORIES
Unit
4-451A
CRUISER ACCESSORIES
Part No.
Part No. Unit MSRP
UltraGard® Helmet Bag
WINDSHIELDS
Fitment
Description
LUGGAGE & BAGS
Hopnel™ Deluxe Rack Bag has 2256 cubic inches of lined storage space. Double zippered main compartment measures 8” H x 24” W x 11” D. The two front compartments measure 8” H x 6” W x 3” D. This remarkable amount of space is contained in a large main compartment with four smaller pockets, three zippered mesh pockets and two easily accessible mesh elastic pockets. Bag securely fastens to luggage rack with a four point mounting system. Extra items can be easily carried by securing them to the top of the bag with a bungee or strap through six reinforced D-rings. Convenient, comfortable, padded, over the shoulder and hand carrying straps makes this the perfect overnight bag. The Deluxe Rack Bag comes with a protective rain cover. Compatible with Big Bike Parts® Luggage Racks and most aftermarket racks of comparable size.
COVERS
Hopnel Deluxe Rack Bag
PEGS, BOARDS & GRIPS
UltraGard® Deluxe Helmet Bag features water resistant heavy duty polyester in a stylish two tone design. The inner fleece liner and impact absorbing foam effectively stores and protects your helmet when it’s not in use. The helmet bag has convenient bottom D-ring slots for locking helmet and bag to the bike. Holds one open or one full-face helmet. Size: 15” L x 11.5” W x 10.5” H. Color: Charcoal over Black.
MSRP 109.95
$
AT V ACCESSORIES FLAGS & FLAG POLE MOUNTS
Deluxe Solo Rack Bag
Fits most Solo Racks, Sissy H50-107BK Bars, & Sissy Bar Racks
Unit
MSRP
Each
$
99.95
UltraGard® has created a luggage rack bag made of high quality weather resistant materials, durable construction and a sturdy mounting system. A large main compartment allows for maximum storage. An additional four easy access zippered compartments with two expandable side pockets add up to 3,320 cubic inches of extra storage space on your bike. Also included is a rain cover and Fitment Part No. Unit MSRP comfortable shoulder strap. Dimensions 20”L x 10”W x 8.5”H. Most Tour Racks Each $59.95 4-603
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
19
GENERAL ACCESSORIES
Part No.
Touring Luggage Rack Bag
LIGHTING
Fitment
LICENSE PLATE ACCESSORIES
Hopnel™ Deluxe Solo Rack Bag for cruisers has 1617 cubic inches of lined storage space. The quick release side lock buckle and belly strap anchoring system works on fender solo racks and on most sissy bars. The heavy duty polyester construction is reinforced to hold its shape even when empty. For more capacity simply expand the side pockets. Includes an attached rain cover for added protection in severe weather and a convenient shoulder strap. Expanded dimensions are 14” x 16.5” x 7”.
STORAGE POUCHES
Audio Luggage & Bags
Saddlebag Rail Bag This Saddlebag Rail Bag provides convenient extrastorage plus protection for the front of the saddlebag from bags and paint chips. It has a hook & loop attachment (instead of snaps) which makes the bag adjustable and secure, preventing it from slipping. Fits most Harley-Davidsonn Touring models. Made in the USA.
HD90-108BK
Lower Fairing Pockets Snaps to existing OEM snaps. Made in the USA.
Fitment
Part No.
Unit
MSRP
Harley-Davidson (left)
HDSRB-LBK
Each
$
39.95
Harley-Davidson (right)
HDSRB-RBK
Each
$
39.95
HD90-110BK
Fitment
Part No.
Unit
MSRP
Harely-Davidson Ultra Classic 1997-2004
HD90-108BK Pair
$
49.95
Harley-Davidson Ultra Classic 2005-2012
HD90-110BK Pair
$
49.95
Passenger Armrest Pouches These pouches bolt to the existing tour pack armrest/ backrest. No modifications are needed. Adds handy and convenient storage for the passenger, removable pouch easily slips off. Made in the USA. Fitment
Part No.
Unit MSRP
Harley-Davidson HD90-106LBK Each $54.95 Classic 1980 & newer (left) Harley-Davidson HD90-106RBK Each $54.95 Classic 1980 & newer (right)
20
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Beverage Holder Our beverage holder is insulated to keep drinks cold. It has a hook and loop attachment which makes the holder adjustable and secure, preventing it from slipping. Fits most Harley-Davidson Touring Models attaching to the left saddlebag guard rail. Beverage bottle included. Made in the USA. Description
Part No.
Beverage Holder with conchos
HD90-105BK Each
28oz. Sport Bottle
HDSB
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
Unit MSRP Each
$
49.95 $
3.95
20-120: Up Position
20-510
PEGS, BOARDS & GRIPS
Windshields
AUDIO
WINDSHIELDS
COVERS LUGGAGE & BAGS WINDSHIELDS
Down Position
Valkyrie Interstate Windshield
Adjustable Flip Windshield For Kawasaki
139.95
Description
Part No.
Unit
Kawasaki VN1700 Vaquero, Voyager 2009-
20-120
Each
Description
Part No.
Unit
Clear
20-510
Each
$
MSRP
Smoke
20-510T
Each
$
MSRP 159.95
$
TOURING ACCESSORIES
139.95
This unique Adjustable Flip Windshield is a two part windshield made from DOT approved 3/16” aircraft quality Lucite Acrylic. The lower portion is dark smoke with the flip upper portion clear. The upper portion can be flipped in seconds from hiding behind the lower portion extending above the lower portion increasing the overall height from 8” to 12.5”. The windshield comes with two sets of hardware, use the quick release thumb screws or blind mount allen head cap bolts.
CRUISER ACCESSORIES
The Valkyrie Interstate Windshield incorporates in its design an integral side wind deflector while still matching the OEM shape and contour. This windshield is 4” wider per side and 2-1⁄2” taller than OEM windshields and is manufactured from 3/16” thick transparent Lucite® DOT approved acrylic for the best in optical clarity. Made in the USA.
CAN AM ACCESSORIES
20-115 20-610
AT V ACCESSORIES FLAGS & FLAG POLE MOUNTS
20-118
Part No.
Unit
15” Windshield
20-115
Kit
$
MSRP
18” Windshield
20-118
Kit
$
259.95 269.95
The stylish windshield for Yamaha Royal Star Venture is 2-1/2” wider per side and 4” shorter than stock OEM windshields. A windshield height of 13” gives it a lower profile for a “sporty” look. Manufactured Description Part No. Unit MSRP from 3/16” thick transparent Lucite® DOT approved acrylic for the best in optical Clear Each $125.95 20-610 clarity. Made in the USA. Smoke
www.bigbikeparts.com
•
20-610T
Each
GENERAL ACCESSORIES
Description
Yamaha Royal Star Venture Windshield
LIGHTING
Acrylic E-Z Mount Cruiser Windshields are available in 15” & 18”. Windshields fit most 1” handlebars and have a 1” built-in height adjustment. The angle of the windshield can be set by simply rotating the hardware around the handlebars. These windshields remove easily with 4 screws. Made in the USA.
LICENSE PLATE ACCESSORIES
EZ Windshield
125.95
$
E-mail us info@bigbikeparts.com
21
WINDSHIELDS
Audio Windshields
Larger Windshield GL1800
20-515
This Show Chrome Accessories® exclusive design draws upon the original GL1800 windshield which provides rider and passenger protection with an additional 3” of width and 2-1/2” of height compared to the OEM windshields. Adjustable. Manufactured from 3/16” thick transparent Lucite® DOT approved acrylic for the best in optical clarity. Made in the USA.
Adjustable Flip Windshield For Honda Gold Wings
Description
Part No.
Unit
Clear
20-515
Each
$
MSRP
Clear with vent cut-out (vent supplied) 20-516
Kit
$
Smoke with vent cut-out (vent supplied) 20-516T
Kit
$
139.95 199.95 199.95
20-514T
This unique Adjustable Flip Windshield is a two part windshield made from DOT approved 3/16” aircraft quality Lucite Acrylic. The lower portion is dark smoke with the flip upper portion clear. The upper portion can be flipped in seconds increasing the overall height from 9-1/2” to 21-1/4”. The windshield comes with two sets of hardware, use the quick release thumb screws or blind mount allen head cap bolts. Description
Part No.
Unit
NEW Honda GL1500 Gold Wing 1988-2000
20-125
Each
$
Honda GL1800 Gold Wing 2001-2012
20-128
Each
$
20-518
MSRP 199.95 199.95
Euro Sport Windshield— GL1500/6 & GL1800 This “sporty” windshield is easily seen over eliminating any distortion. The Euro Sport GL1500/6 measures 31” W & 12-1/2” H and the Euro Sport GL1800 measures 28” W & 12” H. Each windshield is manufactured from 3/16” thick transparent Lucite® DOT Approved acrylic for the best in optical clarity, and comes standard with rain drip edge. Adjustable. Made in the USA.
Sweptback Windshield GL1800 Our “Sweptback” windshield provides a sleek tapered look with improved aerodynamics with an additional 3-1/2” in width and height than OEM windshields. Adjustable. Made in the USA. Description
Part No.
Unit
Clear
20-517
Each
Clear with vent cut-out (vent supplied)
20-518
Smoke with vent cut-out (vent supplied) 20-518T
20-4
MSRP
Fitment
Part No. Unit
209.95
Euro Sport Windshield-Smoke GL1500
20-512T
Each
$
209.95
Euro Sport Windshield-Smoke GL1800
20-514T
Each
$
159.95
$
Kit
$
Kit
$
Tour Windshield GL1500 Gold Wing This custom Tour Windshield for the GL1500 retains the excellent design and aerodynamics of the GL1500, while offering considerably more rider and passenger protection with an additional 3-1 ⁄ 2” in height, 2” in width than OEM windshields. Manufactured from 3/16” thick transparent Lucite® DOT approved acrylic for the best in optical clarity. Made in the USA.
22
139.95
2-359C
MSRP 159.95
Description
Part No.
Unit
MSRP
199.95
Clear
2-359C
Each
$
49.95
199.95
Smoke
2-511
Each
$
49.95
Part No. Unit
Clear (without vent cut-out)
20-3
Each
$
Clear with vent cut-out (vent supplied)
20-4
Kit
$
Smoke with vent cut-out (vent supplied)
20-4T
Kit
$
•
139.95
Our adjustable and closeable Touring Windshield Air Vent fits on 20-516, 20-516T, 20-518, 20-518T, 20-4 and 20-4T Show Chrome Accesories® windshields allowing you to enjoy the comfort of fresh air.
Description
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Touring Windshield Air Vent
MSRP
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
Classic Cruiser Windshield No. 20-205 shown
The Classic Cruiser Windshield is manufactured from 3/16” thick transparent Lucite® DOT approved acrylic which is unmatched in optical clarity and hardness when compared to stock windshields. Windshields are available in 17” or 22” height, clear or smoke and fits tapered forks, straight forks and 56mm oversized forks. All mounting hardware included. Windshield fitments are measured from the top cutout of the headlight to the windshield tip. Made in the USA.
1
COVERS
2
PEGS, BOARDS & GRIPS
1
AUDIO
FLOORBOARDS + BRAKE + SHIFTW E RI NCDOSVHEI R ES LDS
Windshield Trim Kit No. 20-100 shown
This windshield trim kit uses die cast contoured aluminum trim accents to create added flare. The trim kit will dress up your Show Chrome Accessories® straight and tapered fork style Classic Cruiser Windshields & Slipstreamer’s Classic & Falcon style windshields. Hidden “T” screws replace existing windshield brackets making installation easy.
LUGGAGE & BAGS
2
WINDSHIELDS
20-100
Description
Fork Type Needed
HARLEY-DAVIDSON
Description
Fork Type Needed
SUZUKI Tapered
C109R/VZ1600 Marauder
Tapered
LS650 Savage/S40
Straight
M95/VZ1600 Marauder
Straight
S83/VS1400 Intruder
Straight
VL1500 Intruder
Straight
VS700 Intruder 1985-1987
Straight
YAMAHA
V Star 650 Classic
Tapered
V Star 650 Custom
Straight
V Star 950
Tapered
V Star 1100 Classic
Tapered
V Star 1100 Custom
Straight
V Star 1300
Tapered
Straight
XLH1200
Straight
Aero 1998-2002
Tapered
VF750 Magna 1994-2002
Straight
VT600 Shadow DLX 1988-2002
Straight
VT750 ACE STD 1998-2003
Straight
VT750 Aero
Tapered
VT750 Shadow ACE DLX 1998-2002
Tapered
VT750 Phantom
Tapered
VT750 RS
Straight
VT750 Spirit
Straight
VT1100 Shadow 1987-1996
Straight
VT1100 Shadow ACE/Tour 1994-2001
Straight
VT1100 Shadow Sabre
Tapered
VT1100 Shadow Spirit
Straight
VTX1300C
Straight
VTX1300 R/S
Tapered
VTX1800 C/F/R/S/N
Oversized
KAWASAKI
Size
Color
Unit
EN500 Vulcan LTD
Straight
20-1
17”H x 21-1/2”W
Clear
Set
$
239.95
VN800 Drifter
Tapered
20-5
22” H x 21-1/2”W
Clear
Set
$
259.95
VN800 Vulcan 1995-2002
Straight
20-6
22” H x 21-1/2”W
Smoke
Set
$
259.95
VN800 Vulcan Classic
Tapered
20-201
17” H x 21-1/2”W
Clear
Set
$
239.95
VN900 Vulcan Classic
Tapered
20-205
22” H x 21-1/2”W
Clear
Set
$
259.95
VN900 Custom
Tapered
20-206
22” H x 21-1/2”W
Smoke
Set
$
259.95
VN1500 Vulcan 1988-2000
Straight
56mm Oversized
20-215
22” H x 21-1/2”W
Clear
Set
$
VN1500 Vulcan Classic
Tapered
Windshield Trim Kit
20-100
Set
259.95 $
89.95
VN1500 Vulcan Drifter
Tapered
VN1500 Vulcan Meanstreak
Oversized
VN1600 Meanstreak www.bigbikeparts.com
GENERAL ACCESSORIES
Part No.
Straight
LIGHTING
Fork Type
Tapered
MSRP
LICENSE PLATE ACCESSORIES
Straight
Straight
XL1200 Sportster Custom
FLAGS & FLAG POLE MOUNTS
XV535 Virago 1987-2000
Straight
FXSTC Softail Custom
AT V ACCESSORIES
Oversized
Straight
Straight
FXDWG Dyna Wide Glide
HONDA
M50/VZ800 Marauder
XV250 Virago 1995-2003
Straight
FXDL Dyna Low Rider
CAN AM ACCESSORIES
C50/VL800 Volusia
Straight
Dyna Superglide-2007
TOURING ACCESSORIES
WINDSHIELD FITMENT GUIDE
883 Hugger
Tapered •
E-mail us info@bigbikeparts.com
CRUISER ACCESSORIES
WINDSHIELD FITMENT GUIDE
23
WINDSHIELDS
Pouches
HD-3
HD90-103BK
Traditional Tri-Pouches The Traditional Series comes with three roomy compartments in a simple, but classic style. Fits OEM windshields. Dimensions 22-1/2” L x 5-1/2” H x 3” W. Made in the USA. Fitment
Part No.
Unit
MSRP
Harley-Davidson FLHT, FLHTC, & FLHTCU 1986-1995 (5 hole mount)
HD-3
Each
$
64.95
Each
$
64.95
Harley-Davidson FLT, FLTC, & FLTCU HD3-96 1996- (3 hole mount) H50-303BK
Signature Series TriPouches
HD90-003BK
H50-293BK
The Signature Series style comes with braiding and conchos. Three roomy compartments will not interfere with view of instruments. The tri-pouches mount to existing hardware on OEM windshields. Made in the USA. Fitment
Part No.
Unit
MSRP
Harley-Davidson FLHT, FLHTC, & FLHTCU 1996-2012 Dimensions: 22”L x 5-1/2”H x 3”W (3 hole mount)
HD90-103BK
Each
$
Harley-Davidson FLHT, FLHTC, & FLHTCU Pre-1996 Dimensions: 22-1/2”L x 5-1/2H x 3”W (5 hole mount)
HD90-003BK
Each
$
Harley-Davidson Road King Dimensions: 22-1/2”L x 5-1/2”H x 3”W
HD90-203BK
Each
$
Memphis Shades Fats Dimensions: 22-1/2”L x 5-1/2”H x 3”W
HD90-193BK
Each
$
69.95
National Cycle Heavy Duty Windshields Dimensions: 22-1/2”L x 5-1/2”H x 3”W
H50-293BK
Each
$
69.95
Show Chrome Accessories® Classic Windshields Dimensions: 22-1/2”L x 5-1/2”H x 3”W
H50-303BK
Each
$
69.95
HD90-102BK
24
75.95 75.95 75.95
Signature Series Dual Pouch Signature Series style comes with braiding and conchos. The dual pouch mounts to existing hardware on OEM windshields. Dimensions: 22-1/2” L x 5-1/2” H x 3” W. Made in the USA. Fitment
Part No.
Harley-Davidson Classic Fairing 1996 & newer
HD90-102BK Pair
$
Honda ACE Tour
H50-313BK
$
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Unit MSRP
Each
39.95
69.95
Traditional Single Center Pocket The Traditional Series comes with a single center pocket in a simple, but classic style. The single center pouch mounts to existing hardware on OEM windshields. Made in the USA. Fitment
Part No.
Unit
MSRP
Harley-Davidson FLHT, FLHTC, & FLHTCU 1986-1995
HD-1
Each
$
49.95
Signature Series Single Pouch Fits OEM windshields on Yamaha Road Star, Royal Star (not Venture), V Star 650 & 1100, Kawasaki Vulcan 1500 & Classic 1500, Drifter 1500 and Nomad Windshield Single Pouch. Dimensions 10-1/2” L x 2-1/2” H x 4-1/2” W. Made in the USA. Fitment
Part No.
Unit
Kawasaki Drifter 1500, Classic 1500, Y60-412BK Each Nomad, Vulcan 1500, Yamaha Road Star, Royal Star (not Venture), & V Star 650/1100
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP $
39.95
Build Your Bike... The Big Bike Parts Way!
Chrome Comfort Heated Grips pg13
Master Cylinder Cover pg41
LED Master Cylinder Switch Block pg40
HONDA VT 1300 PEGS, BOARDS & GRIPS
Twisted Mirrors pg42
AUDIO
Cruiser Accessories Wireless Tire Pressure Monitoring System Handlebar Mount pg120
Chrome Levers pg42 3-1/2” Elliptical Light Kit pg30
Carbon Fiber Tank Divider pg57
COVERS
License Plate Holder pg114 Starburts LED Marker Lights pg32
LUGGAGE & BAGS
2” Round Reflector Grilles pg36
Air Cleaner Cover pg50
Bullet Fork Cover pg37 Brake Reservoir Cover pg29
Radiator Grille pg43
Side Reflector pg36
TOURING ACCESSORIES
Driver Peg pg6
CRUISER ACCESSORIES
Frame Cover pg52
Chrome Switch Box Housing pg40
Windshield pg21 Risers pg38
Chrome Comfort Grips pg12
CAN AM ACCESSORIES
Signature Series Tank Divider pg57
KAWASAKI VN900
Sissy Bar Luggage Rack pg55
FLAGS & FLAG FL AG POLE MOUNTS
3-1/2” Contour Light Kit pg30
Saddlebag Support Stays pg54
Brake Caliper pg28 Chrome Side Cover pg51 Celestar Regulator Cover pg43
Highway Clamp with Peg pg9
Highway Bars pg46
www.bigbikeparts.com
•
Frame Cover pg52
E-mail us info@bigbikeparts.com
GENERAL ACCESSORIES
Chrome Celestar Radiator Grille pg44
LIGHTING
Passenger Peg pg7
LICENSE PLATE PL ATE ACCESSORIES
LicensePlate Holder pg114 Fender Rail pg47
AT V ACCESSORIES
Sissy Bar Kit pg55
Chrome Visors pg34
Bullet Fork Cover pg37
WINDSHIELDS
Front Fender Tip pg47
25
Build Your Bike... The Big Bike Parts Way! Y amaha V S tar 9 5 0 Cruiser Accessory Switch Housing pg40 Twisted Risers pg38
Twisted Mirrors pg42
Chrome Neck Cover pg49
Chrome Comfort Heated Grips pg13 Chrome Levers pg42
Contour Mini Halogen Lights pg31
Solo Rack pg56
Front Fender Tip pg47
Horn Cover pg37
Saddlebag Stays pg54
Belt Cover pg53
Die Cast Regulator Grille pg43
Side Reflector Grille pg36
Brake Caliper Cover pg28
Chrome Oil Dipstick pg48
Frame Cover pg52
Swing Arm Cover pg52
Master Cylinder Cover pg41
HONDA VTX 1300 Signature Series Tuxedo Tail pg57 Reflector Grilles pg36
Mini Boards pg7
Chrome Switch Box Housing pg40
Signature Series Tank Dividers pg57
Windshield pg23
Risers pg38
Chrome Levers pg42
Fork Cap Covers pg39
Chrome Neck Cover pg49 Fender Rail pg47
Reflector Grilles pg36 Rear Brake Caliper Cover pg29
26
Air Cleaner Cover pg50
Rear Shock Bolt Covers pg53
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Brake Reservoir Covers pg29
Radiator Grille pg44
Chrome Axle Plug pg27 Brake Caliper Cover pg28
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
PEGS, BOARDS & GRIPS
Cruiser Accessories
AUDIO
CRUISER AXLE COVERS
71-118
COVERS LUGGAGE & BAGS
1-321
Chrome Front Axle Cover WINDSHIELDS
Used in conjunction with Chrome Billet Front Axle Plug (1-320) to cover the front right side axle nut. Fitment
Part No.
Unit MSRP 19.95
Each
$
VF750, VT750 ACE & Spirit, Phantom, R/S & VT1100 (not Aero)
1-244
Pair
$
VT750 ACE (left)
1-244L
Each
$
Yamaha Royal (right), Royal Star 1999-2003 & Star Venture
1-244R
Each
$
Yamaha V Stars (right)
63-117
Each
$
CRUISER ACCESSORIES
Valkyrie (right) & Valkyrie Interstate, 1-321 VT1300 Fury, Interstate, Stateline, Sabre VTX1300/1800 Retro/Standard
34.95 15.95
16.95
Fitment
This chromed CNC billet Axle Plug fits perfectly and finishes off the bottom of the front fork stem. The Large Front Axle Plug simply presses into the axle hole.
Part No. Unit MSRP
Kawasaki VN 1600B, 71-118 VN2000, Suzuki M95 Marauder, VZ1600
Each
$
24.95
CAN AM ACCESSORIES
71-131
Chrome Axle Plug
TOURING ACCESSORIES
15.95
AT V ACCESSORIES
1-245
FLAGS & FLAG POLE MOUNTS LICENSE PLATE ACCESSORIES
Chrome Rear Axle Covers Part No.
Unit MSRP
Honda VT750 Shadow, ACE, Phantom, RS & Spirit
1-245
Pair
$
Honda VT1100 & Shadow 1992-2000 53-145 (left)
Each
$
Kawasaki VN2000 2004-2010
71-131
Pair
$
V Star 650 Classic & Custom
63-135
Pair
$
LIGHTING
Fitment
39.95
22.95
45.95
Rear Axle Cover Fitment
Part No.
Unit
Honda VT600 Shadow
1-241
Set
www.bigbikeparts.com
GENERAL ACCESSORIES
54.95
MSRP 105.95
$
•
E-mail us info@bigbikeparts.com
27
FRONT BRAKE CALIPER COVERS
Cruiser Accessories 1-237
55-310
71-126
Front Brake Caliper Cover
Front Brake Caliper Cover
A chromed stamped steel piece to cover the front brake caliper. Created in the popular raised chrome design. Mounts easily with hardware included. Fitment
Part No.
Unit
MSRP
Honda Valkyrie, VF750, VT600, VT750, ACE, Spirit, R/S, VT1100 & Valkyrie (left) (Stepped)
53-447
Each
$
69.95
Fitment
Kawasaki VN1600 Classic 2006-2008, 71-126 VN1700 2009-2012, VN2000 2004-2010
Honda Valkyrie, VF750, VT600, VT750, & VT1100 (left) (Teardrop)
1-237
Each
$
69.95
Honda VT750 Aero 2004-2007, RS (left) (Stepped)
53-428
Each
$
69.95
Honda VTX1300 (right) 2003-2008 (Stepped)
55-310
Each
$
69.95
Honda VTX1800 (left) 2002-2008 (Stepped)
55-107L
Each
$
69.95
Honda VTX1800 (right) 2002-2008 (Stepped)
55-107R
Each
$
69.95
62-108R
Contoured Chromed Stamped Steel Caliper Covers with raised design. Available in left or right version. Mounts easily with included hardware.
81-105
Part No.
Unit
MSRP
Each
$
79.95
82-214
Front Brake Caliper Cover Chromed stamped steel Caliper Covers with unique stepped and terrace design. Mounts with provided hardware. Fitment
Part No. Unit MSRP
Yamaha V Star 62-108L 950, Road Star & Royal Star, Not VStar 1100 (left) (Stepped)
Each
62-108R
Each
Yamaha V Star 650, Road Star & Royal Star (right) (Stepped)
Yamaha V Star 63-605 1100 Classic, Custom, & V Star 1300 (Stepped)
28
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Pair
$
$
69.95
69.95
139.95
$
Front Brake Caliper Cover Stamped steel front brake caliper cover in raised design. Mounts easily with included hardware. Chrome steel cover offers a clean look to cover up the entire brake caliper. Fitment
Part No. Unit MSRP
For 6 Piston Caliper Kawasaki Meanstreak 1500/1600 2002-2005 & Suzuki M95/VZ1600 2004-2005
81-105
Pair
$
Suzuki Boulevard C50/M50 (right) & VL800 Volusia 2001-2004
82-214
Each
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
79.95
69.95
81-107
PEGS, BOARDS & GRIPS
55-308
AUDIO
REAR CALIPER + BRAKE RESERVOIR COVER
1 COVERS
Rear Brake Caliper Covers
Honda VTX1800 2002-2008
55-121
Each $69.95
Honda VTX1300
55-308
Each $69.95
Kawasaki Meanstreak & Nomad 1998-2008, VN900 Custom/ Classic 2006-2012
81-107
Each $69.95
Kawasaki VN2000 2004-2008; VN2000 Classic 2006-2010
71-125
Each $69.95
2
TM
Fitment
Part No.
Unit
MSRP
Kawasaki VN900 Classic 2006-; Custom 2007-
71-314
Each
$
29.95
Yamaha Royal Stars
61-111
Each
$
29.95
Rear Master Cylinder Cover
Fitment
Part No.
Unit
MSRP
Kawasaki VN900 Classic/Custom 2006-
71-326
Each
$
69.95
AT V ACCESSORIES
Billet Banjo Cover for Caliper Part No. Unit MSRP
Honda Cruisers, Valkyrie & Interstate 1997-2003, VT600, VT750 ACE, Phantom, RS & VT1100
1-318
FLAGS & FLAG POLE MOUNTS
Fitment
14.95
Each
$
Part No. Unit MSRP
Honda VTX1300 2003-2009
55-311
$
29.95
Chrome stamped steel piece to replace black OEM. This piece covers more of the reservoir than OEM. Cut-out allows for easy fluid check. Mounts with chrome hardware provided.
This stamped steel Show Chrome Accessories reservoir cover replaces the OEM black cover. The CelestarTM design cut out allows easy viewing of fluid levels. Mounts easily with OEM screw.
Fitment
Part No. Unit MSRP
Fitment
Part No. Unit MSRP
Honda VT1300 R/S/T/X, VTX1800 2002-2008
55-111
Yamaha V Star 950
63-213
Each
$
29.95
www.bigbikeparts.com
•
Each
E-mail us info@bigbikeparts.com
$
29.95
29
GENERAL ACCESSORIES
Fitment
Brake Reservoir Cover
LIGHTING
This stamped steel cover replaces the OEM black cover. Cutout for easy viewing of fluid level. Uses OEM screw.
Brake Reservoir Cover
LICENSE PLATE ACCESSORIES
Rear Brake Reservoir Cover
Each
CAN AM ACCESSORIES
2
TOURING ACCESSORIES
Celestar Rear Brake Reservoir Cover 1
CRUISER ACCESSORIES
Part No. Unit MSRP
WINDSHIELDS
Fitment
LUGGAGE & BAGS
A chromed steel cover for the rear brake caliper. Created in the popular raised chrome design. Mounts with hardware included, no drilling required.
DRIVING LIGHT KITS
Cruiser Accessories
3-1/2” Elliptical Light Kits
3-1/2” Contour Light Kits
Elliptical Light Kit offers all the features and benefits of a low profile light bar. They are designed with cast aluminum housings permanently attached to a formed steel tube without welds. All wiring is routed internally for a clean custom look. A switch is included that can be mounted in a side cover for turning the light bar on and off as desired. Included in this kit are two spot lights, light bar, mounting plate, mounting hardware, wire harness, switch and relay. This kit does not include turn signal lights or turn signal adapters, see page 31-32 for fitments. Available in 3-1/2”, 55-watt bulb Halogen or 3-1/2” LED lights.
Contour Driving Light Kit is made of forged aluminum to provide the ultimate in strength and durability. All wiring is routed internally for a clean custom look. A switch is included that can be mounted in a side cover for turning the light bar on and off as desired. Included in this kit are two spot lights, light bar, mounting plate, mounting hardware, wire harness, switch and relay. This kit does not include turn signal lights or turn signal adapters, see page 31-32 for fitments. Available in 3-1/2”, 55-watt bulb Halogen or 3-1/2” LED lights.
Fitment
Halogen Lights LED Lights Part No. Unit MSRP Part No. Unit MSRP
Halogen Lights LED Lights Part No. Unit MSRP Part No. Unit MSRP
Fitment
Honda Valkyrie 1997-2003, VTX1300 55-332 C/R/S 2003-2009, & VTX1800 C/F/N/R/S 2002-2008
Kit
$
299.95 55-332L
Kit
$
499.95
Honda Valkyrie 1997-2003, VTX1300 C/R/S 2003-2009, & VTX1800 C/F/N/R/S 2002-2008
55-312
Kit
$
389.95 55-312L
Kit
$
599.95
Honda VT600 & Yamaha V Star 1100 Classic/Custom
63-622
Kit
$
299.95 63-622L
Kit
$
499.95
Honda VT600 & Yamaha V Star 1100 Classic/Custom
63-613
Kit
$
389.95 63-613L
Kit
$
599.95
Honda VT750 ACE 1998-2003 & VT1100 Aero/Sabre 1999-2008
53-132
Kit
$
299.95 53-132L
Kit
$
499.95
Honda VT750 ACE 1998-2003 & VT1100 Aero/Sabre 1999-2008
53-422
Kit
$
389.95 53-422L
Kit
$
599.95
Honda VT750 Aero, Spirit C2 Shaft Drive, Phantom, R/S
53-452
Kit
$
299.95 53-452L
Kit
$
499.95
Honda VT750 Aero, Spirit C2 Shaft Drive, Phantom, R/S
53-432
Kit
$
389.95 53-432L
Kit
$
599.95
Honda VT1300 S/R/T 2010
55-362
Kit
$
299.95 55-362L
Kit
$
499.95
Honda VT1300 S/R/T 2010
55-352
Kit
$
389.95 55-352L
Kit
$
599.95
Kawasaki VN900 Classic
71-322
Kit
$
299.95 71-322L
Kit
$
499.95
Kawasaki VN900 Classic
71-316
Kit
$
389.95 71-316L
Kit
$
599.95
Kawasaki VN2000 2004-2009 & Classic 2006-2010
71-142
Kit
$
299.95 71-142L
Kit
$
499.95
Kawasaki VN2000 2004-2009 & Classic 2006-2010
71-134
Kit
$
389.95 71-134L
Kit
$
599.95
Suzuki VL800, C50 2001-
82-232
Kit
$
299.95 82-232L
Kit
$
499.95
Suzuki VL800, C50 2001-
82-222
Kit
$
389.95 82-222L
Kit
$
599.95
Yamaha Road Star
62-132
Kit
$
299.95 62-132L
Kit
$
499.95
Yamaha Road Star
62-112
Kit
$
389.95 62-112L
Kit
$
599.95
Yamaha V Star 650 Classic 1998-
63-142
Kit
$
299.95 63-142L
Kit
$
499.95
Yamaha V Star 650 Classic 1998-
63-132
Kit
$
389.95 63-132L
Kit
$
599.95
Yamaha V Star 950 2009-
63-205
Kit
$
299.95 63-205L
Kit
$
499.95
Yamaha V Star 950 2009-
63-203
Kit
$
389.95 63-203L
Kit
$
599.95
Yamaha V Star 1300 2007-
63-314
Kit
$
299.95 63-314L
Kit
$
499.95
Yamaha V Star 1300 2007-
63-312
Kit
$
389.95 63-312L
Kit
$
599.95
Driving Light Kits Kits come complete with a mounting bar bracket which will mount on the fork under the headlight. The lamps are a pair of highly polished 3-1/2” spot lights with high intensity, H3 55W bulbs. The spot lights are easily adjustable for dimming and come with a wire harness including relay to protect bike’s circuitry.
30
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Fitment
Part No. Unit
Kawasaki VN1500 Classic E 1998-2000 & Vulcan 800 Classics
71-104
Kit
$
Shadow VLX600
1-231
Kit
$
Suzuki VZ800
81-101
Kit
$
VT1100 Shadow ACE
1-232
Kit
$
VT1100 Shadow/Spirit
1-235
Kit
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP 199.95 199.95 199.95 199.95 199.95
AUDIO
DRIVING LIGHT KITS + TURN SIGNAL ADAPTERS
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS WINDSHIELDS
Contour Mini Halogen Driving Light Kit is made of forged aluminum to provide the ultimate in strength and durability. All wiring is routed internally for a clean custom look. A switch is included that can be mounted in a side cover for turning the light bar on and off as desired. Included in this kit are two mini halogen lights, light bar, mounting plate, mounting hardware, wire harness, switch and relay. This kit does not include turn signal lights or turn signal adapters, see page 31-32 for fitments. Available in 2-3/8”, 50-watt bulb.
Elliptical Driving Light Kit with 50-watt Mini Halogen Lights
55-122
Kit
$
389.95
Honda VT600 & Yamaha V Star 1100 Classic/Custom
63-616
Kit
$
389.95
Honda VT750 ACE 1998-2003 & VT1100 Aero/Sabre 1999-2008 53-122
Kit
$
389.95
Honda VT750 Aero, Spirit C2 Shaft Drive, Phantom, R/S
53-436
Kit
$
389.95
Honda VT1300 S/R/T 2010
55-353
Kit
$
389.95
Kawasaki VN900 Classic
71-320
Kit
$
389.95
Kawasaki VN2000 2004-2009 & Classic 2006-2010
71-136
Kit
$
389.95
299.95
Suzuki VL800, C50 2001-
82-226
Kit
$
389.95
$
389.95
Honda Valkyrie 1997-2003, VTX1300 C/R/S 2003-2009, & VTX1800 C/F/N/R/S 2002-2008
55-333
Kit
$
299.95
Honda VT600 & Yamaha V Star 1100 Classic/Custom
63-623
Kit
$
299.95
Honda VT750 ACE 1998-2003 & VT1100 Aero/Sabre 1999-2008 53-133
Kit
$
299.95
Honda VT750 Aero, Spirit C2 Shaft Drive, Phantom, R/S
53-453
Kit
$
Honda VT1300 S/R/T 2010
55-363
Kit
$
Kawasaki VN900 Classic
71-323
Kit
$
Kawasaki VN2000 2004-2009 & Classic 2006-2010
71-143
Kit
$
82-233
Kit
MSRP
$
299.95 299.95 299.95 299.95
MSRP
62-133
Kit
$
299.95
62-122
Kit
Yamaha V Star 650 Classic 1998-
63-143
Kit
$
299.95
Yamaha V Star 650 Classic 1998-
63-134
Kit
$
389.95
Yamaha V Star 950 2009-
63-206
Kit
$
299.95
Yamaha V Star 950 2009-
63-204
Kit
$
389.95
Yamaha V Star 1300 2007-
63-315
Kit
$
299.95
Yamaha V Star 1300 2007-
63-313
Kit
$
389.95
Turn Signal Adapter These CNC turn signal adapters are required when purchasing our Contour or Elliptical Driving Lights. The turn signal adapters allow for re-installation of the stock or after market turn signals.
82-229T
62-112T
71-134T
16-111T
55-122T
Pair
$
Kawasaki VN900, VT1300 Fury, Interstate, Stateline & Sabre 8mm Stud & 3/8” Stud
16-111T
Pair
$
Kawasaki VN2000 2004-2008 & Classic 2006-2010
71-134T
Pair
$
Suzuki C50, C90, & M50
82-229T
Pair
$
Suzuki VL800
82-222T
Pair
$
Yamaha VStar 650 & 1100 1998-2004, Roadstar 1999-2011 (Not 1100 Classic)
62-112T
Pair
$
23.95
Yamaha V Star 950 & 1300
63-312T
Pair
$
22.95
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
MSRP 19.95
15.95 29.95
34.95 29.95
31
GENERAL ACCESSORIES
82-222T
Part No. Unit
Most Honda Cruisers (Not VTX1300C, VT1300C)
LIGHTING
55-122T
Fitment
LICENSE PLATE ACCESSORIES
63-312T
FLAGS & FLAG POLE MOUNTS
Yamaha Road Star
Yamaha Road Star
AT V ACCESSORIES
Part No. Unit
Honda Valkyrie 1997-2003, VTX1300 C/R/S 2003-2009, & VTX1800 C/F/N/R/S 2002-2008
Part No. Unit
CAN AM ACCESSORIES
Fitment
Fitment
Suzuki VL800, C50 2001-
Contour Driving Light Kit with 50-watt Mini Halogen Lights
TOURING ACCESSORIES
2-3/8” Contour Mini Halogen Lights
Elliptical Mini Halogen Light Kit offers all the features and benefits of a low profile light bar. They are designed with cast aluminum housings permanently attached to a formed steel tube without welds. All wiring is routed internally for a clean custom look. A switch is included that can be mounted in a side cover for turning the light bar on and off as desired. Included in this kit are two mini halogen lights, light bar, mounting plate, mounting hardware, wire harness, switch and relay. This kit does not include turn signal lights or turn signal adapters, see page 31-32 for fitments. Available in 2-3/8”, 50-watt bulb.
CRUISER ACCESSORIES
2-3/8” Elliptical Mini Halogen Lights
TURN SIGNALS + ACCESSORIES
Cruiser Accessories 10-1501/10-1503
10-1601/10-1603 10-1604/10-1606 10-1701/10-1703
10-1801/10-1803
Amber LED Turn Signal Conversion Kits Amber LED Turn Signal Conversion Kits provide a unique honeycomb clear lens to the OEM turn signals. LEDs are brighter than stock lights, providing added safety. LED circuit boards plug into OEM bulb socket replacing the stock bulb. Each LED circuit board has a polished chrome face plate to enhance illumination. These kits require the components listed in the descriptions to return turn signal to stock flash rate. Turn Signal Conversion Kits mount with OEM screws. See LED Conversion Kit Application Chart. LED CONVERSION KIT APPLICATION CHART Description HONDA VT 750 Shadows & VTX1800 1998-2009, VT1300 Fury, Interstate, Stateline & Sabre
Front Kit
Rear Kit
Items Required with Kits
Unit
MSRP
10-1503
10-1501
(1) 13-305 or (1) 13-306 Digital Flasher, (1) 13-308 LED Splitter
Set
$
39.95
VT1300 Fury, Interstate, Stateline, & Sabre, VTX1300’s & VTX1800R/S/N/F
10-1503
10-1501
(1) 13-305 or (1) 13-306 Digital Flasher
Set
$
39.95
Clear Replacement Lens 1998-2009
16-1502CL
16-1502CL
Pair
$
VN800, VN1500, & VN1600 (Not Nomad & Classic)
10-1703
10-1701
(1) 13-304A Dual Load Equalizer per kit or (1) 13-314 Quad Load Equalizer per bike, (1) 13-308 LED Splitter
Set
$
39.95
VN900
10-1703
10-1701
(1) 13-305 or (1) 13-306 Digital Flasher, (1) 13-308 LED Splitter
Set
$
39.95
VN1600 Classic, Nomad & VN2000
10-1705 (Pair)
10-1501
(1) 13-304A Dual Load Equalizer per kit or (1) 13-314 Quad Load Equalizer per bike, (1) 13-308 LED Splitter
Set
$
39.95
10-1803
10-1801
(1) 13-304A Dual Load Equalizer per kit or (1) 13-314 Quad Load Equalizer per bike, (1) 13-308 LED Splitter
Set
$
39.95
VStar 650, VStar 1100, Roadstar, & Royal Star (1996-2004)
10-1603
10-1601
(1) 13-304A Dual Load Equalizer per kit or (1) 13-314 Quad Load Equalizer per bike, (1) 13-308 LED Splitter
Set
$
39.95
VStar 650, VStar 1100, Roadstar, & Royal Star (2005 & newer) up to 1700cc
10-1606
10-1604
(1) 13-304A Dual Load Equalizer per kit or (1) 13-314 Quad Load Equalizer per bike, (1) 13-308 LED Splitter
Set
$
39.95
14.95
Kawasaki
Suzuki C50, C90, C109, M50, M95 (VZ1600), M109R, S40, S50, & S83 Yamaha
2
16-111A
16-111R
1
1
Amber Turn Signals
Chrome LED has a M8-1.25 x 35mm long mounting stud. Each Turn Signal contains 24 LEDs. Kit requires components listed in chart above to return turn signals to stock flash. Requires Load Equalizer. Description
Part No. Unit
MSRP
Medium Amber Turn Signals, 16-113A 1-1/4” x 3-5/8”
Pair
$
Large Amber Eagle Eye Turn 16-114A Signals; 1-5/8” x 4-5/8”
Pair
$
32
119.95
145.95
2
Turn Signal Adapters
These Turn Signal Adapters allow replacement of the OEM turn signals with Show Chrome Accessories® extensive line of LED lights, including 1 6-111A, 16-111R, 116-113A and 16-114A. Fits most Honda Cruisers or any other using 8mm or 3/8” stud mount. Description
Part No. Unit
MSRP
Turn Signal Adapters
53-439T
$
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Pair
22.95
Starburst LED Marker Lights These chrome finished lights replace reflectors or turn signals. M8-1.25” x 35mm long mounting stud. Small (1-5/8” x 2-1/2” long) size allows the ability to mount anywhere on bike. Each marker light contains 20 mini LEDs. Kit requires components listed in chart above to return turn signals to stock flash. Description
Part No. Unit
Amber Light Red Light
16-111A 16-111R
Pair Pair
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP
119.95 $119.95 $
PEGS, BOARDS & GRIPS
55-364
COVERS
Dual Load Equalizer
$
29.95
This part is our bright 50 watt halogen die cast driving lights with 2 piece fork clamps. This kit gives a great custom look to fit 39 to 41mm forks, such as Honda Fury and Stateline, Kawasaki VN900 and Yamaha VStar 650/1100 to mention a few. The 50 watt halogens are amazingly bright and have rotatable bezels that allow lights to be mounted at multiple angles. Their 8mm mounting stud allows precise aiming and adjustment. Kit comes complete with clamps, lights, wire harness, switch, and relay to protect the bikes circuitry. Description
Part No.
39-41mm Fork Mount Driving Light
55-364
Unit Kit
Die Cast Fork Clamps (Clamps Only)
22-141
Pair
MSRP 189.95
$
$
59.95
TOURING ACCESSORIES
$
49.95
Fitment
Part No. Unit MSRP
Unit is useful on almost all bikes
13-314
Each
$
AT V ACCESSORIES
Each
This Quad Load Equalizer is designed to allow for use of LED turn signals in place of incandescent turn signals. When replacing front and rear incandescent lights with LEDs you will notice a fast flash rate that will be reduced to a stock flash rate when utilizing this part. Does not require replacement of the stock flasher module. Item splices into existing turn signal system.
CAN AM ACCESSORIES
Part No. Unit MSRP
39.95
LED Flasher Relay
Fits cruisers with single turn indicator lights
13-308
Each
$
8.95
13-306
Set
$
25.95
LED Dual Conversion Harness This LED Dual Conversion harness allows LED Marker Lights to operate as running and turn signal lights such as BBP 16-111,16-113, and 16-114. One harness is required for each individual light. Splices into existing wires from marker light. Fitment
Part No. Unit MSRP
Unit is useful on almost all bikes
13-307
www.bigbikeparts.com
Each •
$
GENERAL ACCESSORIES
Part No. Unit MSRP
Part No. Unit MSRP
Designed to be Plug-N-Go on Honda Cruisers
LIGHTING
Fitment
Fitment
LICENSE PLATE ACCESSORIES
This LED cross feed prevention harness is for bikes with a “single turn signal indicator” that have replaced incandescent turn signals with LEDs. This unit prevents cross feeding through the indicator light that makes your bike function as if four ways are active while utilizing either right or left turn signals. Item splices into existing wires coming from indicator light.
LED flasher Relay is used when replacing incandescent turn signals with LED turn signals. This unit slows fast flash rate when replacing incandescent front and/or rear turn signals with LEDs. Plug ‘n’ Go.
FLAGS & FLAG POLE MOUNTS
Single Indicator LED Splitter
CRUISER ACCESSORIES
Flasher replaces stock mechanical flasher with a digital flasher that is not load dependant. This unit slows fast flash rate when replacing incandescent front and/or rear turn signals with LEDs. Item splices into flasher control wire harness. Unit is useful on almost all bikes 13-305 (except GL1800)
Driving Light Clamp
Quad Load Equalizer
Universal Flasher
Fitment
22-141 (Clamp Only)
WINDSHIELDS
Part No. Unit MSRP
Unit is useful on almost all bikes 13-304A Each
LUGGAGE & BAGS
This Dual Load Equalizer is designed to allow for use of LED turn signals in place of incandescent turn signals. When replacing front or rear incandescent lights with LEDs you will notice a fast flash rate that will be reduced to a stock flash rate when utilizing this part. Does not require replacement of the stock flasher module. Item splices into existing turn signal system. Fitment
AUDIO
TURN SIGNAL ACCESSORIES
8.95
E-mail us info@bigbikeparts.com
33
T urnsi g nal S peaker Grille + L i g ht V isors
Cruiser Accessories NEW LED Turnsignal Speaker Grille Set
Enhance safety and visibility of your Kawasaki VN1700 Voyager/ Vaquero with these LED Turnsignal Visor Trims for the front speakers. These speaker grilles have embedded amber LED strip in the outside edge of each speaker trim to provide side visibility. They act as running lights same as the front position lights and become turnsignals when turnsignals are engaged. Fits Kawasaki VN1700 Voyager and Vaquero.
Chrome Spotlight Visor Chromed Spotlight Visor for our 4-1/2” spot light kits. Fits 4-1/2” Spotlight.
Fitment
Part No. Unit MSRP
Kawasaki VN1700 Vaquero & Voyager
71-203
Pair $149.95
1
Part No.
Unit
MSRP
1-229
Pair
$
19.95
7” Universal Headlight Visor Fitment
Part No. Unit MSRP
Fits most 7” Headlights
53-429
Each
19.95
$
1 2
Celestar Headlight Visor Includes Visor Only.
1
TM
Fitment 7” Universal Headlight Visor 2
Celestar Turn Signal Visor
Part No.
Unit
MSRP
63-114
Each
$
19.95
TM
Fitment
Part No.
Unit
MSRP
Yamaha Road Star, Royal Star, V Star 650/1100 Classic (not VStar 950 & VStar 1300)
61-106
Pair
$
Screw Mount Turn Signal Visor Mounts to two screws on turn signal face.
Fitment
Part No. Unit MSRP
Honda Cruisers CB500 1989-1990, Tour, Valkyrie, VF750 1-249 1988-1999, VT600 1988-1997, & VT1100 1987-1999
34
Pair
$
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
29.95
•
19.95
Face Mount Turn Signal Visor Cruiser visor with raised teardrops. Mounts with double sided tape provided. Without screw mount lenses. Fitment
Part No. Unit MSRP
Valkyrie Interstate, VT600, VT750, 1-243 VT1100, VT1300 Fury, Interstate, Stateline & Sabre& VTX1300/1800 Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
Pair
$
45.95
PEGS, BOARDS & GRIPS
1
1
4
4
LUGGAGE & BAGS
Taillight Grille
Gives your taillight an accent with this chromed Taillight Grille. Mounts with two screws where OEM screws hold the taillight on. 5-1/4”L x 3-3/8”H x 3/4”W.
Part No. Unit MSRP
Suzuki C50/VL800
82-220
Each
$
Fitment
Mounts with existing hardware.
Part No. Unit MSRP
Most Suzuki’s 1986-2003
82-219
$
24.95
TM
Part No. Unit MSRP
Yamaha Royal Star, Road Star 61-107 XV 1600 & V Star 650, VStar 1100 Classic & Silverado
Each
$
32.95
TM
2
Fitment
Part No. Unit MSRP
Yamaha Royal Star, Road Star, 61-105 & V Star 650/1100 Classic
Each
15.95
$
TOURING ACCESSORIES
Fitment
Celestar Taillight Visor
Celestar Turn Signal 4 Celestar Turn Accent Grilles Signal Visors 3
TM
TM
Mounts with double-sided tape provided. Part No. Unit MSRP
Cruisers with smooth face turn signals
61-109
Pair
14.95
$
Fitment
Part No. Unit MSRP
Yamaha Road Star, Royal 61-106 Star, V Star 650/1100 Classic (not VStar 950 & VStar 1300)
Pair
19.95
$
These chrome grilles fit most 3” round turn signals with front screws.
Chromed steel Taillight Visor in the tear drop design. Mounts with double sided tape provided. Part No. Unit MSRP
Honda Valkyrie, VT750 ACE, VT1100 Aero/Sabre
53-442
Each
$
Part No.
Honda, Magna 1987-1999, Valkyrie, Valkyrie Tour 1997-2000, VT600 1988-1998, & VT1100 Shadow 1987-1999 (not Aero)
1-214
Unit Set (4)
MSRP $
29.95
FLAGS & FLAG POLE MOUNTS
Fitment
Fitment
AT V ACCESSORIES
Turn Signal Grilles
Tear Drop Taillight Visor
CAN AM ACCESSORIES
Fitment
CRUISER ACCESSORIES
Mounts with double-sided tape provided.
Celestar Taillight Accent Grille
1
Turn Signal Grilles
Pair
2
34.95
These chrome finished accents for Suzuki can be used on front or rear turn signals. Easily mounts with screws in existing OEM screw holes. 2-3/4” diameter.
3
3
WINDSHIELDS
Fitment
2
COVERS
2
1
AUDIO
LIGHT GRILLES
39.95
LICENSE PLATE ACCESSORIES
This chrome taillight grille fits perfectly to the taillight of a Magna. Mounts easily with two screws. 6-1/4”L x 3-1/8”H x 1”H.
2-1/2” Turn Signal Grilles are made of chromed stamped steel and add a striking accent to Suzuki OEM round turn signals. These Turn Signal Grilles can be used on both the front and the rear turn signals.
This chromed steel Light Grille dresses up any trailer using the Peterson M306, 391, 392 style light, i.e. Bushtec, Escapade, etc. Packaged by the pair with Show Caps for a clean and neat addition to any trailer. 4-1⁄2” L x 2-1⁄4” W.
Fitment
Part No. Unit MSRP
Fitment
Fitment
Part No. Unit MSRP
Magna 700 1985-1986
2-128
Most late model Suzuki’s 2004-2010 81-111
Peterson M306, 391, 392
1-2
Taillight Grille
Each
16.95
$
Part No. Unit MSRP Pair $29.95
www.bigbikeparts.com
•
Pair
E-mail us info@bigbikeparts.com
$
8.95
35
GENERAL ACCESSORIES
Light Grilles (For Peterson M306)
LIGHTING
Turn Signal Grilles
REFLECTOR GRILLES
Cruiser Accessories Chromed ABS Reflector Grilles Dress up Kawasaki reflectors with these Chrome Reflector Grilles from Show Chrome Accessories®. Grilles fit 2.5” x 1.5” lenses. Attaches with double sided tape included. Fitment
Part No.
Unit
MSRP
Kawasaki Reflector on VN750, VN800, VN1500, VN1600, & VN2000 from 1986-
71-115
Pair
$
11.95
2” Round Reflector Grilles Add a chrome accent to Suzuki Volusia/C50 Boulevard reflectors. Grilles can also be used on Round LED Lights (16-109) and (16-110). Grilles are made of chromed ABS. Attaches with double sided tape included.
Reflector Grilles
Fitment
Two piece set fits 3-1/4” x 1-1/4” reflectors on most Honda cruisers. Attaches with double sided tape included.
Suzuki C50/VL800 Boulevard, 82-225 C90/VL1500 Boulevard, & Yamaha Stars
Fitment
Part No.
Unit
MSRP
Most Honda Cruisers including VT750 Phantom, RS, VT1300 Fury, Interstate, Stateline & Sabre
53-112
Pair
$
Part No.
Unit
MSRP
Pair
$
16.95
12.95
Reflector Grilles Chromed ABS grille will fit over lenses 2.5” x 1.35”. Attaches with double sided tape included.
Contours Mini Accent Grilles
Part No.
Unit
MSRP
Honda VT750 Aero, Spirit C2, Phantom
53-430
Pair
$
14.95
Side Reflector Grilles
These accents have a variety of installation options including: on fork caps, round reflectors, turn signals, fork stem covers, carb covers, etc. Attaches with double sided tape included. 1-3/8” Diameter. Part No.
Unit
MSRP
62-103
Pair
$
36
Fitment
12.95
Two piece universal chromed ABS grille set. Fits 3-1/4” x 1-1/4” side reflectors on most Honda and Yamaha cruisers. Attaches with double sided tape included. Fitment
Part No.
Unit
MSRP
Most Honda & Yamaha cruisers including VT 750 Phantom, RS, VT 1300 Fury, Interstate, Stateline & Sabre
2-156A
Pair
$
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
10.95
Celestar Reflector Accents TM
1-7/8” round accents attach with double sided tape provided. Fitment
Part No.
Unit
MSRP
1-7/8” round reflectors
63-113
Pair
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
10.95
AUDIO
FORK COVERS + DEFLECTORS + HORN COVERS
PEGS, BOARDS & GRIPS COVERS
V-Twin Horn Cover Fits 3-1/4” round horn. Cover fits snug over horn without hardware. Fits Most 3-1/4” Round Horns
Part No. Unit 1-228
MSRP
LUGGAGE & BAGS
Fitment
14.95
Each
$
WINDSHIELDS
Fits 3-1/2” round horn. Cover fits snug over horn without hardware. Fits Most 3-1/2” Round Horns
Part No. Unit 1-213
MSRP 10.95
Each
$
Snap on the flare and hide the unattractive black OEM horn with Show Chrome Accessories® new chrome plated ABS Vantage Horn Cover. The stylish pattern hints at movement and our unique inner tapered profile locks to the existing OEM horn. The Cover does not interfere with the resonance of the horn and presents a great appearance at a fraction of the cost of other aftermarket horn covers. Fitment
Part No.
Unit
MSRP
Fits 3” & 3-1/4” Round Horns For Most Kawasaki & Yamaha Cruisers
63-320
Each
$
Fits 3-1/2” Round Horns For Most Honda Cruisers
55-324
Each
$
12.95
AT V ACCESSORIES
Honda Valkyrie, Valkyrie Interstate, & VTX1800 Clear Panel
51-328
Kit
1100 Classic, C50/ 55-319 VL800, M95/VZ1600, VN900, VT750, VT1300 S/R/T, VTX1300, XV1600, XV1700, XVZ1300, V Star 950
Pair $159.95
GENERAL ACCESSORIES
Part No. Unit MSRP
Part No. Unit MSRP
LIGHTING
Fitment
LICENSE PLATE ACCESSORIES
Acrylic fork deflector panels mount to each fork with a 55mm clamp that incorporates our familiar raised ribbed design. The clear panels measure a generous 13”L x 4-1/4”W and mount to the clamp with a polished chrome mounting bracket that is 4-1/2”L x 5/8”W. Used throughout our cruiser accessory line for all Valkyrie GL1500 models and VTX1800 Retro & Standard 2002-2008.
FLAGS & FLAG POLE MOUNTS
Cover the bottom of the forks with this polished die-cast chrome. Easily mounts with included set screws. Does not fit Fury VT1300CX & VT750 Spirit due to speedometer sensor.
Fitment
CAN AM ACCESSORIES
12.95
Bullet Fork Covers
Front Fork Deflectors
TOURING ACCESSORIES
Fitment
Vantage Horn Cover
CRUISER ACCESSORIES
Horn Cover
159.95
$
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
37
HANDLEBAR RISERS + ACCESSORIES
Cruiser Accessories 4” Square Pullback Risers These sets are a square block style with a curved back to add style to the bike. They raise handlebars 4” and give 1” pullback. The risers come with matching clamps and are available in either solid or cutout designs. Most riser applications do not require adjusting cable length. Fitment
Part No.
Unit
MSRP
With Cutout for 1” Bar 55-135*
Pair
$
55-316*
Pair
$
Solid for 1” Bar
55-316
139.95 55-135
139.95
* Bolts not included with risers. Use with appropriate bolt adapters from list below.
4” Classic Pullback Risers This set raises the handlebars 4” and give 1” pullback to increase riders comfort and comes with matching round top clamps. Most riser applications do not require adjusting cable length. Fitment
Part No.
Unit
1” Bar
55-304X*
Pair
MSRP
139.95
$
* Bolts not included with risers. Use with appropriate bolt adapters from list below.
4” Tall Round Pullback Risers
4” Twisted Risers
Sculpted Twisted Risers are a perfect custom component that really sets your cruiser apart from the crowd! These polished chrome plated risers move your handlebars back for a more comfortable riding position. The risers bolt on in minutes eliminating lengthy installs. Most riser applications do not require adjusting cable length. The Twisted Risers pair nicely with our Twisted Cruiser Mirrors see page 42. Fitment
Part No.
Unit
1” Bars
55-334X
Pair
55-335X
1-1/4” Bars
Pair
This set raises the handlebars 4” and give 3/4” pullback to increase riders comfort and comes with matching round top clamps. Attractive chromed steel with rounded tops for a custom look. Requires bolt adapters. Most riser applications do not require adjusting cable length.
MSRP
139.95
$
139.95
$
Fitment
Part No.
Unit
1” Bar
55-133X*
Pair
MSRP 139.95
$
* Bolts not included with risers. Use with appropriate bolt adapters from list below.
ADAPTER BOLTS FOR RISERS
Bolts for threaded risers. Zinc plated. Grade 8.8
Fitment Honda VT600 1999-2008, VT750 Aero 2004-2009, Suzuki VL800 2001-2004, C90 2005-2009
Measurement M12-1.25 x 55mm Hex Head Bolt
Part No. B1121255PZ8
Unit Pair
MSRP $3.95
Honda VTX1300 Retro
M12-1.25 x 40mm Hex Head Bolt
B1121240PZ8
Pair
$
Honda VTX1800, Valkyrie Standard & Tour, Suzuki M95/VZ1600
M12-1.25 x 30mm Hex Head Bolt
B1121230PZ8
Pair
$
3.95
Kawasaki VN800 Classic, VN900, & VN1500 Classic
M10 x M12 Dual Threaded Bolt
B7101255PZ8
Pair
$
8.95
Suzuki C50/C90
M12 x M14 Dual Threaded Bolt
B7121280PZ8
Pair
Yamaha Road Star 1999-2009, V Star 650, 950 & 1100 Classic/Custom 1999-2009, VL1500 19982004, VT600, VT750, Aero, Spirit, R/S, VT1100 2001-2008
M12-1.25 x 65mm Hex Head Bolt
B1121265PZ8
Pair
1-302
3.95
11.95
$
$
3.95
Handlebar Clamp
55-120
Chromed die-cast Handlebar Clamp replaces the OEM style and fits 3-15/16” O.C. handlebar risers. Fitment
Part No.
Honda VTX1800 F/N/R/S/T Grooved Handlebar Clamp 55-120
38
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Unit
MSRP
Each
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
59.95
AUDIO
TRIPLE TREE ACCENTS + FORK CAP & STEM COVERS
PEGS, BOARDS & GRIPS COVERS
1
Unit
MSRP
55-315
Each
$
59.95
Honda VTX1800
55-131
Each
$
59.95
Kawasaki Meanstreak 1500/1600 & Suzuki M95/VZ1600
81-114
Each
$
59.95
Suzuki VL800 Volusia
82-217
Each
$
59.95
2
CRUISER ACCESSORIES
Part No.
Honda VTX1300
WINDSHIELDS
These chrome steel triple tree covers easily attach to the top of the triple tree with double-sided tape provided. They cover the OEM brushed aluminum beautifully for a cast custom look. Fitment
LUGGAGE & BAGS
Triple Tree Accents
TOURING ACCESSORIES
63-128
63-611 63-128
CAN AM ACCESSORIES AT V ACCESSORIES
1-322 55-128
Fitment
Inisde Dia. Part No. Unit MSRP 35mm
Kawasaki Meanstreak 1500/1600 & Suzuki M95/ VZ1600 (1-3/4” nut) (Dome)
44mm
1-322
Each $29.95
1
Fork Cap Covers
Fitment
36mm
Yamaha VStar 650, 950 & 1100, Royal Stars & Road Star (not warrior) (Dome)
31mm
82-224
63-128
Each $24.95
Each $32.95
Each $32.95
Honda VT750, Aero, Phantom, R/S & Spirit C2 (Dome)
28mm
53-435
Pair
$
Honda Valkyrie, VTX1800, Suzuki M95/VZ1600 (15/16” nut) (Dome)
24mm
55-128
Pair
$
54.95 79.95
Suzuki Roadstars, VL800 2001-2003, & Not C50 (1-1/4” nut) (Dome)
33mm
82-223
Pair
$
Suzuki C50/C90, Yamaha Road Star, & VStars (Dome)
28mm
63-611
Pair
$
54.95
Yamaha Royal Stars, VStars, & VT750 Phantom, R/S & Spirit (Classic)
28mm
62-101
Pair
$
54.95
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
39.95
39
GENERAL ACCESSORIES
Suzuki C50/VL800, C90/1500 Intruder, & M50/ VZ800 (1-1/4” nut) (Dome)
81-115
Inside Dia. Part No. Unit MSRP
LIGHTING
Honda Valkyrie, Valkyrie Interstate, VF750, VT600, VT750, VT1100, & VTX1300/1800 (Classic)
53-435
62-101
LICENSE PLATE ACCESSORIES
Fork Stem Cover
FLAGS & FLAG POLE MOUNTS
2
SWITCH BOX + MASTER CYLINDER
Cruiser Accessories
52-605A
52-705MA
LED Master Cylinder Switch Block
LED switch block assemblies incorporate 3 rocker style switches with bright amber LED’s. Mount on the brake side of the bike and easily control auxiliary driving, fog, or marker lights on Cruisers or Gold Wings. The Switch Block Assembly fits the master cylinder for an integrated OEM look. 81-110: Clutch Side
81-110: Brake Side
Chrome Switch Box Housing For Brake & Clutch Show Chrome Accessories cast switch boxes replace OEM housing, requires removal and installation of OEM switches and wiring. Recommend professional installation by dealer. ®
Fitment
Part No.
Unit
MSRP
Fits most Honda Cruisers 1987-2010: Honda Valkyrie, VF750, VT600, VT750, VT1100, & VTX1300/1800 1987-2010, VT1300 Fury
51-333
Kit
$
Kawasaki Meanstreak 1500/1600, Roadstar, VN900, VN2000, V Star 650 Custom, & Suzuki M95/VZ1600 2004-2005
81-110
Kit
$
Kawasaki VN1600 Classic/Nomad, & Yamaha V Star 650 Classics
63-136
Kit
$
Suzuki C50 2005-2006, VL800 2001-2004
82-227
Kit
$
Suzuki C50 2007-2011, C109 2008-2011
82-234
Kit
99.95
Fits Honda GL1500/GL1800, VTX1300/VTX1800, VT750, VT1100, VT1300 Fury, Interstate, Stateline, Sabre, VF750,VT600 & Valkyrie, Yamaha Royal Star & Road Star. Fitment
Part No.
Unit
Chrome (left/clutch)
52-605LA
Set
$
Chrome (right/brake)
52-605A
Set
$
Matte (left/clutch)
52-705LMA Set
$
Matte (right/brake)
52-705MA
$
52-705LM
MSRP 79.95 79.95 79.95 79.95
Set
52-605
99.95 99.95 99.95
109.95
$
Yamaha VStar 1100 Classic
63-614
Kit
$
Yamaha VStar 1100 Custom
63-617
Kit
$
Yamaha VStar 1300
63-302
Kit
$
99.95 99.95 99.95
Cruiser Accessory Switch Housing
Constructed of cast aluminum and finished in a high luster chrome. The two push button switches have red LED’s indicating when your accessories are on. Switch Block can be mounted to 1” handlebars on either left or right side. Fitment
Part No. Unit
Fits most Cruisers with 1” handlebars
13-207
Kit
MSRP 109.95
$
Master Cylinder Switch Block The Switch Block Assembly fits master cylinders and houses three switches for auxiliary controls of lighting. The assembly is available in chrome and a matte black finish. Shown with our Master Cylinder Top Cover (2-288). Fits Honda GL1500/GL1800, VTX1300/VTX1800, VT600, VT750, VT1100, VT1300 Fury, Interstate, Stateline, Sabre, VF750 & Valkyrie, Yamaha Royal Star & Road Star. Description
Part No.
Unit MSRP
Chrome (right/brake)
52-605
Set
$
69.95
Matte (left/clutch)
52-705LM
Set
$
69.95
Replacement Switch 6A at 12.5V For 52-605 (Requires Soldering)
16-29
Each
$
4.95
Master
Cylinder Switch Block
Chrome Master
Cylinder Face Clamp Replaces original OEM face clamp cover with bright chrome replacement.
40
Fitment
Part No.
Unit MSRP
Honda Cruisers
51-341
Each $15.95
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Cast zinc alloy with a black powder coat finish. Complete with two switches for auxiliary lighting functions. Comes with all needed mounting hardware and wiring. Fitment
Part No. Unit MSRP
Most Harley-Davidson’s
91-305
Set
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
$
49.95
PEGS, BOARDS & GRIPS
2-288
AUDIO
MASTER CYLINDER ACCESSORIES
63-216
Fitment
COVERS
Master Cylinder Covers Part No. Unit MSRP 25.95
Pair
$
Each
$
Each
$
14.95
LUGGAGE & BAGS
Honda Valkyrie, VT1100 1987-1996, 2-288 VT1300 Fury, Interstate, Stateline, Sabre, VTX1800, & Yamaha Royal Stars Honda VF750, VT600, VT750, VT1100 2-288A 1997-2010, VTX1300, & Yamaha Roadstars Kawasaki Meanstreak 1500/1600, 71-112 VN900, VN1600 Classic, VN2000, & Suzuki M95/VZ1600
16.95 55-357
WINDSHIELDS
53-747
55-356
Fitment
Part No. Unit MSRP $
$
49.95
24.95
Fitment
Part No. Unit
MSRP
Honda VT1300-Fury, Stateline, Interstate, Sabre; VT600, VT750, VT1100, VTX1300
55-356
Each
$
34.95
Yamaha new style brake cylinder VStar 950, 1300 and 2008 and later VStar 650, 1100 63-216
Each
$
34.95
55-357
Each
$
Brake Cylinder Face Clamp for Honda and Yamaha Cruisers to be used with BBP#55-356 or BBP#63-216
19.95
2-447
AT V ACCESSORIES
Coin Holder
Show Chrome finish Free Spirit raised eagle master cylinder covers are a great finishing touch to set off those handlebars. Part No. Unit MSRP 29.95
$
Honda VF750, VT600, VT750, VT1100 2-447A 1997-2010, VTX1300, & Yamaha Roadstars
Each
$
Kawasaki Meanstreak 1500/1600, VN900, VN1600 Classic, VN2000, & Suzuki M95/VZ1600
71-114
Each
$
Suzuki S50/VS800 & S83/VS1400 1988-2005
82-100
Pair
$
Suzuki VL800/C50/M50 2001-2005
82-202
Each
$
Yamaha V Star 650/950/1100/1300
63-118
Each
$
16.95
19.95
44.95
MSRP
Coin Holder 52-689 All Honda GL1500, GL1800, VTX, VT750, VT1300, Yamaha Roadstar & Royal Star
Each
$
Plastic Repl. Cover 952689C All Honda Cruisers, Yamaha Roadstar & Royal Star
Each
29.95
$
4.95
Coin Holder Chrome plated, die-cast coin holder is designed to store a generous amount of coins and folding money on motorcycle handlebars. The holder attaches to a permanently mounted vibration free bracket. Quickly disconnects for total security.
22.95
Fitment
Part No.
Unit
24.95
Universal Applications
2-434A
Kit
www.bigbikeparts.com
•
GENERAL ACCESSORIES
Pair
Unit
LIGHTING
Honda Valkyrie, VF750, VT600, VT750, 2-447 VT1100, VT1300 Fury, Interstate, Stateline, Sabre, VTX1800, Yamaha Roadstars, & Royal Stars
Part No.
LICENSE PLATE ACCESSORIES
Fitment
Fitment
FLAGS & FLAG POLE MOUNTS
Mounts on the master cylinder with longer screws provided. Slots to hold quarters, nickels and dimes. Includes clear plastic top cover to keep out the elements.
Free Spirit Master Cylinder Covers
MSRP $
29.95
E-mail us info@bigbikeparts.com
CAN AM ACCESSORIES
Honda Valkyrie, VT1100 1987-1996, Pair 53-747 VT1300 Fury, Interstate, Stateline, Sabre, VTX1800, & Yamaha Royal Stars Honda VF750, VT600, VT750, VT1100 53-747A Each 1997-2010, VTX1300, & Yamaha Roadstars (right)
TOURING ACCESSORIES
Teardrop Master Cylinder Covers
Master Brake Cylinder Covers for Honda and Yamaha Cruisers. These Chrome Die Cast Aluminum Covers have you covered like never before. Simply slip over the brake cylinder with double sided tape provided and instantly add some flash! Do you have accessories attached to your master cylinder face clamp (55-357), no problem as the Brake Cylinder Face Clamp Cover is sold separately and matches up with either the BBP#55-356 version for Honda or BBP#63-216 version for Yamaha.
CRUISER ACCESSORIES
Master Brake Cylinder Covers
41
MIRRORS + LEVERS + ACCESSORIES
Cruiser Accessories
18-106
Smooth Blade Brake Levers Fitment
Part No.
Unit
MSRP
Honda Valkyrie, VF750, VT600, VT750, VT1100, VT1300 Fury, Interstate, Stateline, Sabre & VTX1300/1800
18-107
Each
$
29.95
Yamaha Royal Star & Road Star
18-201
Each
$
29.95
Yamaha VStar 650/1100 Classic & Custom & VStar 950/1300
18-203
Each
$
29.95
Smooth Blade Clutch Levers Fitment
Twisted Cruiser Mirrors
Show Chrome Accessories® Twisted Mirrors for cruisers. The Twisted Mirrors are manufactured of lightweight aluminum and have a sleek chrome finish. A unique twisted stem design hides any external joints or unsightly jam nuts. Available in two stem heights for your riding style: short 3-1/4” and tall 4-1/4”. The Twisted Cruiser Mirrors simply thread into existing 10mm mirror mounts for easy installation. For Honda, Kawasaki, and Suzuki Cruisers. Also available for Yamaha Cruisers with right and left threads. The Twisted Cruiser Mirrors also pair nicely with our Twisted Risers see page 38. Fitment
Part No.
Unit
For Honda, Kawasaki, & Suzuki Cruisers (Short Stem)
28-101
Pair
$
For Honda, Kawasaki, & Suzuki Cruisers (Tall Stem)
28-102
Pair
$
For Yamaha Cruisers (Short Stem)
28-601
Pair
$
For Yamaha Cruisers (Tall Stem)
28-602
Pair
$
10mm reverse mount for Yamaha
63-607
$
29.95
Replaces OEM No. 53178-MM5-006, Valkyrie, VF700 1987, VF750C 1988, VT1100C 1987-1996, & VTX1800
18-106
Each
$
29.95
Yamaha Road Star, V Stars 650/1100 Classic/Custom, & V Star 950/1300
18-204
Each
$
29.95
Shadow VT1100 95, VT750, VT1300 Fury, Interstate, Stateline & VTX1300 C/R/S
18-108
Each
$
29.95
Yamaha Royal Star
18-202
Each
$
29.95
139.95 139.95 139.95
Smooth Adjustable Blade
Pair
$
89.95
Leather lace-up lever covers 1-3/4” x 4-1/2” wide. Fringe measures 12” long.
Description
Part No.
Unit
MSRP
Lever Fringe
17-110
Pair
$
16.95
Foam Lever
Foam lever sleeves slide over the brake and clutch levers providing gentle comfort. Description
Part No.
Unit
Foam Lever
17-99
Pair
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
MSRP $
4.95
Part No. Unit
MSRP
Kawasaki VN800, VN900, VN1500 1996-2008, 18-301 VN1600, VN2000, Suzuki C50, M50/VZ800, M95/VZ1600, & VL800 (Brake Lever)
Each
$
29.95
18-302
Each
$
29.95
Kawasaki VN1500 1996-2008, VN1600, & Suzuki M95/VZ1600 (Clutch Lever)
Lever Fringe
42
29.95
Each
139.95
Die-cast visored mirror is 3” tall x 5-1/2” wide. Height to center of mirror is 5-1/4” and angles out 3-1/2” to the center.
17-99
$
Kawasaki VN800 Drifter, VN900, VN2000, 18-404 Suzuki LS650/S40, & VL800
18-301 front
MSRP
Oval Mirrors
Part No. Unit MSRP
MSRP
Each
Fitment
Fitment
Part No. Unit
Honda NT650 1988-1991, VF750, & VT600 18-110
Helmet Holder Stud With Padlock
53-113
Chrome stud threaded for clutch and brake pin replacement. Fitment
Part No. Unit MSRP
Helmet Holder Stud with Padlock 6mm Honda Cruisers
53-113
Kit
$
Helmet Holder Only 6mm Most Metric Cruisers
2-354
Pair
$
14.95 19.95
Helmet Holder Only 10mm All Yamaha Stars, 53-443 Harleys & Honda VT750 RS
Each
Mini Brass Padlock Fits Helmet Holder Studs 4-236
Each $5.95
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
$
8.95
AUDIO
RADIATOR & REGULATOR COVERS
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS
71-313
Celestar Regulator Cover TM
Fitment
Part No. Unit MSRP
Kawasaki VN900 Classic 2006-; Custom 2007-
71-313
Each
$
39.95
WINDSHIELDS
Celestar™ design in chromed stamped steel dresses up the regulator. Mounts with hardware provided. Dimension 5-3/4”L x 5”H x 1-1/8”W.
Fitment
Part No.
Unit
Honda VT1300 Stateline, Interstate and Sabre
55-355
Each
MSRP 119.95
$
CAN AM ACCESSORIES
Chrome Radiator Grille for Honda Fury TM
Chromed stamped steel Regulator Cover is 11” x 6” in size. Mounts with hardware provided. Part No.
Unit
MSRP
Yamaha Road Stars 1999-2004
62-110
Each
$
36.95
Fitment
Part No.
Unit
MSRP
Honda VT1300CX Fury
55-350
Each
$
FLAGS & FLAG POLE MOUNTS
Fitment
This Chrome Radiator Grille for the VT1300 CX Fury replaces the OEM black plastic. This ABS Chrome Radiator Grille lifts and snaps into place just like the OEM and can be installed in minutes.
AT V ACCESSORIES
Celestar Regulator Cover
99.95
LICENSE PLATE ACCESSORIES
Die Cast Regulator Cover
This shiny chrome piece will dress up the regulator. Part No.
Unit
MSRP
Kawasaki VN2000 2005-2008 & Classic 2006-2010
71-127
Each
$
49.95
Fitment
Part No.
Unit
MSRP
Yamaha VStar 950
63-212
Each
$
GENERAL ACCESSORIES
Fitment
LIGHTING
This die-cast chrome aluminum Regulator Cover instantly dresses up the regulator of the VStar 950 and adds a great chrome accent to the frame. The cut out design provides a distinctive design element. Installs quickly and easily, making this cover a VStar 950 must have.
Regulator Cover
59.95
www.bigbikeparts.com
TOURING ACCESSORIES
This fresh new distinctive custom radiator grille for the Honda VT1300 Stateline, Interstate, and Sabre is made of ABS and has Show Chrome Accessories’ renowned chrome finish. Its long vertical styling compliments the lines of the VT1300 Stateline series. It replaces the stock OEM black plastic and mounts with two screws. Quick and easy installation makes an immediate improvement.
CRUISER ACCESSORIES
Chrome Radiator Grille for Honda
•
E-mail us info@bigbikeparts.com
43
RADIATOR GRILLES
Cruiser Accessories Chrome Celestar Radiator Grille
TM
Chromed stamped steel replaces OEM. Individual Celestar™ design embedded in grille design. Mounts with hardware included. Fits with Show Chrome Accessories® Highway Bars see page 46. Fitment
Part No.
Unit
Kawasaki Meanstreak 1500/1600, & Suzuki M95/VZ1600
81-104
Each
$
Kawasaki VN900 Classic 2006-; Custom 2007-
71-324
Each
$
Suzuki Boulevard C50/M50 & VL800 Volusia
82-218
Each
$
Yamaha Royal Star Venture 1999-2009 61-108
Each
$
63-317
Each
$
Yamaha V Star 1300
MSRP 145.95 145.95 145.95 145.95 145.95
Chrome V-Style Radiator Grille
Chromed stamped steel grille replaces OEM. Unique V-style decoration embedded in the grille design. Fits with Show Chrome Accessories® Highway Bars see page 48.
Chrome Mesh Radiator Grille Chromed stamped steel Radiator Grille replaces OEM on bike to give the radiator a dazzling chrome finish without affecting radiator air flow. Fits with Show Chrome Accessories® Highway Bars see page 46. Fitment
Part No.
Unit
Honda VT1100 ACE/Aero/Sabre/Shadow/Spirit
1-216
Each
MSRP
Honda VT750 ACE 1998-2003; DC Chain 2001-2007; Not C2; R/S 2010-
1-234
Each $149.95
Honda VT750 Aero Spirit C2, Phantom
53-418
Each
$
Honda VTX1300 C/R/S 2003-2009
55-302
Each
$
Honda VTX1800C 2002-2008, VTX1800F, VTX1800R/S 2002-2003
55-112
Each
$
Kawasaki VN900 Classic 2006-; Custom 2007-
71-321
Each
$
Kawasaki Vulcan VN800 Classic/Drifter
71-303
Each
$
Suzuki VL800 Volusia, C50/M50 2001-
82-206A
Each
$
Suzuki S50/VS800
82-102
Each
$
Yamaha V Star 1300
63-316
Each
$
145.95
$
145.95 145.95
Fitment
Part No. Unit
Honda VT750 Aero, Spirit C2, Phantom
53-419
Each
$
Honda VT1100 ACE/Aero/Sabre/Shadow/ 53-114 Spirit
Each
$
145.95 145.95
Honda VTX1300 C/R/S 2003-
55-303
Each
$
145.95
Kawasaki VN2000 Vulcan
71-121
Each
$
145.95
Suzuki VL800 Volusia, C50/M50 2001-
82-207A Each
$
145.95 145.95
Valkyrie Radiator Grille This chrome Radiator Grille Accent replaces OEM plain black mesh on Valkyrie. This will give the radiator a chrome finish edge to edge without affecting radiator air flow.
44
Fitment
Part No.
Unit
MSRP
Honda GL1500 Valkyrie
1-307
Each
$
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
39.95
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP 145.95 145.95 145.95 145.95 145.95
AUDIO
RADIATOR GRILLES + ACCESSORIES
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS WINDSHIELDS CRUISER ACCESSORIES
55-144A
Part No. Unit
Honda VTX1800
55-144A Each $145.95
MSRP
Honda VTX 1300 C/R/S 2003-
55-325
Each $145.95
55-145A
Chrome Celestar Radiator Grille
TM
Fitment
Part No.
Unit
Honda VTX1800
55-145A
Each
MSRP 145.95
$
LICENSE PLATE ACCESSORIES
Fitment
Fitment
Part No. Unit
Honda Valkyrie & Valkyrie Interstate 51-338
Each
MSRP $
Part No.
Honda Magna VF750 & Valkyrie 1-306
39.95
www.bigbikeparts.com
•
Unit MSRP Each
14.95
$
E-mail us info@bigbikeparts.com
45
GENERAL ACCESSORIES
Chromed steel top trim for all Honda Valkyrie & Valkyrie Interstate radiators.
This chrome Cap Cover easily slides over the existing Honda Valkyrie and Magna VF750 radiator cap providing instant shine to the stock cap. 2” diameter.
LIGHTING
Radiator Cap Cover Radiator Top Cover
FLAGS & FLAG POLE MOUNTS
Manufactured of steel and then chrome plated, the CelestarTM Radiator Grille is a must have for your Honda VTX1800. It has been updated with an eye-catching curved look to encompass all models. The special chin design on the bottom of the Radiator Grille adds a custom look. Simply bolts on to the existing mounts with the supplied hardware, making installation easy. Dimension 21-1/2”L x 11”W x 3”D.
AT V ACCESSORIES
Fitment
CAN AM ACCESSORIES
Manufactured of steel and then chrome plated, the Mesh Radiator Grille is a must have for your Honda VTX1300 C/R/S & 1800. It has been updated with an eye-catching curved look to encompass all models. The special chin design on the bottom of the Radiator Grille adds a custom look. Simply bolts on to the existing mounts with the supplied hardware, making installation easy. Dimensions 55-144: 21-1/2”L x 11”W x 3”D; 55-325: 18-1/2”L x 7-5/8”W x 3-7/8”D.
TOURING ACCESSORIES
Chrome Mesh Radiator Grille
H I G H W A Y B A R S + P A C - A - D E R M S TM
Cruiser Accessories
55-140
71-318
Highway Bars These chrome steel tube bars can accommodate our 1-1/4” clamps to mount our line of pegs for added riding comfort. Mounts to existing holes in the front frame with hardware provided. No drilling required. Bars only extend as far as the pegs on the bike. Fitment
Part No.
Unit
Honda VT750 Aero 2004-2008, Phantom, R/S, & Spirit C2 53-434
Pair
MSRP
Fitment
Part No.
Unit
$
229.95
Suzuki C50/M50 2005- & VL800 2001-2004
82-213A
Pair
$
Yamaha V Star 650 Custom/Classic 1998-2008, not recommended with floorboards
63-126
Pair
$
Yamaha V Star 650 Custom/Classic 1998-2009
63-137
Pair
$
209.95
Yamaha V Star 950
63-209
Pair
$
229.95
Yamaha V Star 1100 Classic
63-603
Pair
$
Yamaha V Star 1300
63-319
Pair
$
Honda VT1100 Sabre
53-118
Pair
$
229.95
Honda VTX1300 (1 piece)
55-307
Set
$
229.95
Honda VTX1800 C/F
55-140
Pair
$
229.95
Honda VTX1800 N/R/S/T
55-118A
Pair
$
Kawasaki VN900 Classic 2006-; Custom 2007-
71-318
Pair
$
Kawasaki VN2000 2004-2008 & Classic 2006-2010
71-133
Pair
$
229.95 229.95 229.95
MSRP 189.95 149.95
189.95
229.95
Pac-A-Derms
TM
Attractive and functional, the redesigned Hopnel™ PacA-Derms™ provide maximum protection against cold wind and water spray creating an essential barrier from the elements ensuring a warm, comfortable ride. Designed to form fit Show Chrome Accessories® highway bars, installs in seconds, allows for highway peg mounting and are built using heavy duty weather resistant marine grade vinyl and corrosion resistant mounting hardware.
46
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Fitment
Part No.
Unit
Harley-Davidson FLH & FLT
HD90-107BK
Pair
MSRP 119.95
$
Harley-Davidson FLH & FLT, Plain
HDEE
Pair
Honda VT750 Aero, Phantom, R/S, for 53-434
H50-350BO
Pair
$
Honda VT1100 Sabre for 53-118
H50-310BO
Pair
$
Honda VTX1800 C/F for 55-140
H50-510BO
Pair
$
Honda VTX1800 for 55-118A
H50-505BK
Pair
$
Kawasaki VN900 for 71-318
K70-300BO
Pair
$
Kawasaki VN2000 for 71-133
K70-110BO
Pair
$
Suzuki C50/VL80 for 82-213A
S80-220BO
Pair
$
Yamaha V Star 1100 Classic for 63-603
Y60-310BO
Pair
$
•
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
79.95
$
119.95 119.95 119.95 119.95 119.95 119.95 119.95 119.95
AUDIO
FENDER TIPS + RAILS + EXTENSIONS
PEGS, BOARDS & GRIPS
Unit
MSRP
Each
$
79.95
MSRP
Each
$
25.95
Honda VT1300 Stateline/Interstate
55-351
Each
$
25.95
Honda VTX 1300 & VTX 1800 Retro
55-147
Each
$
25.95
Kawasaki VN900
71-328
Each
$
25.95
Kawasaki VN1700 Classic, Vaquero, Voyager, Nomad 2009-
71-200
Each
$
28.95
NEW Suzuki VL800 Volusia & C50 Boulevard 2002-
82-235
Each
$
28.95
Yamaha V Star 950
63-201
Each
$
25.95
Yamaha V Star 1100 Classic
63-615
Each
$
25.95
NEW Yamaha V Star 1300
63-306
Each
$
28.95
Rear Fender Tip Accent Fitments
Part No.
Unit
MSRP
Honda VT1300 Stateline/Interstate
55-359
Each
$
28.95
Kawasaki VN1700 Vaquero
71-202
Each
$
28.95
NEW Yamaha V Star 1300
63-307
Each
$
28.95
Front Fender Extension
Fitment
Part No.
Unit
MSRP
Honda Valkyrie
1-326
Each
$
AT V ACCESSORIES
This chromed steel Front Fender Extension gives your bike a touch of shine with the popular ribbed pattern. 59.95 71-122
Front Fender Rails
Unit
MSRP
1-327
Each
$
75.95
Unit
MSRP
53-411 53-433 53-119 55-317 55-137 71-317 71-122 82-210 62-104A 61-112A 63-121A 63-318
Each Each Each Each Each Each Each Each Each Each Each Each
$
www.bigbikeparts.com
•
79.95 79.95 $79.95 $79.95 $79.95 $79.95 $79.95 $79.95 $79.95 $79.95 $79.95 $79.95 $
E-mail us info@bigbikeparts.com
47
GENERAL ACCESSORIES
Part No.
Honda Valkyrie
Part No.
Honda VT750 ACE Honda VT750 Aero Honda VT1100 Sabre Honda VTX1300 Retro R/S/T 2003-2008 Honda VTX1800 Retro Kawasaki VN900 Classic 2006Kawasaki VN2000 2004-2008; VN2000 Classic 2006-2010 Suzuki C50/VL800 2002Yamaha Road Stars Yamaha Royal Stars and Venture V Star 650 & 1100 Classic Yamaha V Star 1300
LIGHTING
Fitment
Fitment
LICENSE PLATE ACCESSORIES
These Front Fender Rails incorporate a custom twin rail design, an upper rail and a bottom rail, to add chrome accent to your bike. The rails securely mount to the front forks with a four point attachment to minimize vibration. Bolts on to original fender mounting bracket.
FLAGS & FLAG POLE MOUNTS
53-411
Rear Fender Extension
CAN AM ACCESSORIES
Unit
53-444
TOURING ACCESSORIES
Part No.
Honda VT 750 Aero
CRUISER ACCESSORIES
Front Fender Tip Accent Fitments
WINDSHIELDS
Part No.
This ABS bright chrome accent fits snug to the contour of your front fender. The high center design with sweeping layered curves, adds an exciting feel to the front fender. This great addition is corrosion proof, providing trouble free maintenance and easy installation with 3M double sided tape giving your motorcycle that added flair it needs.
LUGGAGE & BAGS
Tear Drop Front Fender Extension Honda VT750 ACE & VT1100 Sabre 53-726
55-359 - Rear Fender Tip Accent
Chrome Contour Front & Rear Fender Tip Accents
53-726
Fitment
COVERS
55-351 - Front Fender Tip Accent
FUEL COVERS + COOLANT COVERS + DIPSTICKS
Cruiser Accessories View of Oil Dipstick off-bike 53-424
53-424; Style B 1-301; Style D 1-300; Style C
53-405; Style A 71-201; Style E
Chrome Oil Cap Show Chrome Accessories Chrome oil filler caps replace OEM and utilizes the existing OEM O-ring. Comes in 5 different stylings Fitment
Style Part No. Unit MSRP
Fitment
Style Part No. Unit MSRP
Honda VT600
A
53-705
Each
$
28.95
Honda VT750 ACE 1998-2003, R/S 2010-, Spirit DC 2008 & 2001-
A
53-405
Each
$
28.95
Honda VT750 Aero/Spirit C2
B
53-424
Each
$
28.95
Kawasaki VN1700 2009-2012
E
Honda VT750 ACE, Aero, Sabre, Spirit & VT1100 Shadow
C
1-224
Each
$
19.95
C
28.95
Suzuki Boulevard C50/M50 2005- & VL800 Volusia 2001-2004
28.95
Yamaha Royal Star 1999-2004 & Royal Star Venture
C
Yamaha VStars 650/1100 1998-2004, & 1300 Yamaha VStar 950
Honda VTX1300 2003-2009, VT1300 R/S/T/X
A
55-305
Each
$
Honda VTX1800 Retro/Standard
B
55-105
Each
$
Honda Valkyrie
C
1-300
Each
$
19.95
Fuel Shut Off Valve Plate Cover Stamped steel cupped cover hides the fuel shut off valve assembly. Cover only; knob sold separately.
55-301
Each
$
Kawasaki VN1500 1996-2004 & VN1600 2003-2004, & Suzuki M95/VZ1600 2004-2005
C
81-106
Each
$
71-201
Each
$
82-205
Each
$
61-103
Each
$
C
63-119
Each
$
A
63-214
Each
$
Fitment Unit
Chrome Fuel Shut Off Knob Honda Shadows, VT750, VT1100, & VTX1300
1-247
Each
Fuel Shut Off Valve Plate Cover Honda VT750 ACE/Aero/Spirit, VT1100, VT1300 & VTX1300
55-301
Each
MSRP $
$
Each
MSRP 99.95
$
8.95
28.95
Two piece choke knob slips over Honda & Yamaha carbureted cruiser chokes.
Mounts to existing rubber cap. Part No. Unit MSRP Each
Part No. Unit
Yamaha Road Star 62-109
Universal Choke Knob Cover
Coolant Overflow Cover
48
1-301
This bright chrome CNC billet aluminum Oil Filter Cover looks great on the Yamaha Road Star. Two piece filter cover has a threaded top for easy filter access. Secures with hex head screws.
Part No.
Honda Shadow, VT750 1-248 ACE, Phantom, R/S, Spirit & Aero
D
Oil Filter Cover
Fitment
Fitment
Honda Valkyrie
Fitment
14.95
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Part No. Unit
Most Honda & 63-124 Yamaha carbureted cruisers
$
•
Set
MSRP $
29.95
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
28.95 19.95
28.95 19.95 19.95 19.95
28.95
AUDIO
NECK COVERS + VISORS + ACCENTS
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS WINDSHIELDS
82-201
63-210
CRUISER ACCESSORIES
Chrome Neck Covers
Chrome Gas Tank Top Cover
Chromed ABS cover to replace OEM black cover, uses existing hardware to mount.
Fitment
Part No.
Unit
MSRP
Yamaha Royal Star Venture
61-104
Each
$
44.95
Unit
MSRP
Honda VT750 Aero, Phantom, & Spirit C2
53-426
Pair
$
89.95
Honda VTX1300
55-314
Pair
$
89.95
Honda VTX1800 2002-2008 C/F/R/S/T (Not recommended for “N”)
55-148
Pair
$
89.95
Kawasaki VN900 Classic 2006-
71-325
Pair
$
89.95
Suzuki Boulevard C50/M50 2005-, & VL800 Volusia 2001-2004
82-201
Pair
$
89.95
Suzuki C90/VL1500
82-103
Pair
$
89.95
VN1600 Classic/Nomad
71-128
Pair
$
89.95
Yamaha V Star 650 Classic/Custom
63-120
Pair
$
89.95
Yamaha V Star 950
63-210
Pair
$
89.95
Yamaha V Star 1100 Classic/Custom
63-604
Pair
$
89.95
FLAGS & FLAG POLE MOUNTS
Neck Trim Accents
LICENSE PLATE ACCESSORIES
Pair of decorative teardrop chrome accents that mount to neck trim with double sided tape provided. 55-110
Speedo Visor
Part No.
Honda VT750 Aero, R/S & Suzuki 53-438 VL800/C50 2005-2008
Unit
MSRP
Each
$
53-404
Pair
$
49.95
GENERAL ACCESSORIES
Fitment
Part No. Unit MSRP
Honda VT750 ACE 1998-2003
LIGHTING
This CNC billet chrome visor dresses up the speedometer, adding that extra touch to bikes. Visor helps block some of the sun reflection off the speedometer cover. Clear silicone for mounting not included. About a 5-1/4” Visor.
Fitment
AT V ACCESSORIES
Part No.
CAN AM ACCESSORIES
Fitment
TOURING ACCESSORIES
Replaces OEM black plastic cover.
54.95
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
49
AIR CLEANER COVERS + ACCENTS
Cruiser Accessories 1 2
2
Custom Painted
62-106 55-354
1
71-310
53-425
71-305
Free Spirit Air Cleaner Covers
This bright chrome Free Spirit Air Cleaner Cover is made of either Chromed ABS or Stamped Steel and replaces the OEM cover. 99.95 99.95
Fitment
Part No. Unit MSRP
99.95
Yamaha Road Stars
62-106
Part No.
Unit
MSRP
Honda VT600 Shadow (Cast Aluminum)
53-708
Each
$
Honda VT750 Aero, Phantom, R/S & Spirit C2 (ABS)
53-425
Each
$
Honda VT1300 S/R/T/X (ABS)
55-354
Each
$
Honda VTX1300/1800 (ABS)
55-108
Each
$
Kawasaki VN800 (Cast Aluminum)
71-305
Each
$
Kawasaki VN900 Classic 2006- ; Custom 2007- (ABS)
71-310
Each
$
Kawasaki VN2000 2004-2010, VN2000 Classic 2006-2010
71-116
Each
$
Kawasaki Meanstreak (all), VN1500 (all), VN1600 (all), Suzuki M95/VZ1600 (fuel injected) (Cast Aluminum)
81-108
Each
$
Suzuki VL 800, C50 2001- 2008 (ABS)
82-208
Each
$
Suzuki Boulevard M50 (ABS)
81-113
Each
$
Yamaha Road Star (ABS)
62-107
Each
$
Yamaha V Star 650 Eagle Head (Cast Aluminum)
63-101
Each
$
Yamaha V Star 1100 Free Spirit (Cast Aluminum)
63-602
Each
$
Yamaha V Star 950 2009 & 1300 2007-2009 (ABS)
63-301
Each
$
Grooved Spark Plug Covers
99.95
$
99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95
Chrome Accent Strips
2
Three piece set of chrome accents dress up the air cleaner area on the Honda VLX600. Mounts with double sided tape provided. Accent Strips are 2” to 2-3/8”L x 1/4”W.
Fitment
Part No.
Honda VTX1800
55-125
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Each
99.95
Die-cast spark plug covers replace the OEM covers. Four piece set.
50
TM
Chromed ABS with a black painted inner area that can be custom painted to match bike color. Easily replaces the OEM cover.
Fitment
2
Contours Air Cleaner Cover
•
Unit Set (4pc.)
MSRP 79.95
$
Fitment
Part No.
Honda VLX600
53-710
Unit Set (3pc.)
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP 16.95
$
62-113
PEGS, BOARDS & GRIPS
82-203
AUDIO
SIDE COVERS
COVERS LUGGAGE & BAGS WINDSHIELDS CRUISER ACCESSORIES
62-115
55-138
71-327
TOURING ACCESSORIES
63-304
CAN AM ACCESSORIES AT V ACCESSORIES
Chrome Side Covers are an easy way to add a stunning accent to the side of any bike at a great value. Chrome Side Covers replace OEM painted side covers. Mount with existing hardware. Fitment
Part No.
Fitment
Part No.
Unit
MSRP
Kawasaki VN900 Classic 2006-2012; Custom 2007-2012
71-312
Each
$
125.95
Kawasaki VN900 Classic 2006-2012; Custom 2007-2012 (3 71-327 piece set, upper & lower panels)
Set (3pc.)
$
Suzuki Boulevard C50/M50 2005- & VL800 Volusia 2001-2004 82-203
Pair
$
82-104
Pair
$
Yamaha Road Star 1999-2011 (Not Warrior) Fits with 62-113 62-115
Pair
62-113
Pair
$
Set (3pc.)
$
53-427
Pair
$
Honda VT1100 Standard/Ace/Sabre 1999-2008 (not Spirit) 53-116
Pair
$
Honda VTX1300
55-318
Pair
$
Honda VTX1800 C
55-138
Pair
$
Honda VTX1800 F/ N/R/S/T
55-129
Pair
$
Kawasaki Classic FI 1997-2009, Nomad, Nomad FI, & VN1500 Classic
71-111
Pair
$
Kawasaki VN800
71-304
Pair
$
Kawasaki VN900 Classic 2006-2012; Custom 2007-2012
71-311
Pair
$
Honda VT750 Aero, Phantom & Spirit C2
125.95 125.95 125.95 125.95
Suzuki C90/C90T & VL1500 1998-2004
125.95 125.95 $
125.95 125.95
Yamaha Royal Stars XV1600 1998-2003, XV1700 2004-2011 61-113 (Not Warrior)
125.95
Yamaha V Star 650 Custom/Classic
63-127
Pair
$
Yamaha V Star 1100 Classic/Silverado (not Custom)
63-606
Pair
$
Yamaha V Star 1300
63-304
Pair
$
•
39.95
125.95
Yamaha Road Star XV1600 1998-2003 & XV1700 2004-2009
www.bigbikeparts.com
34.95
149.95
169.95
125.95 125.95
E-mail us info@bigbikeparts.com
125.95
51
GENERAL ACCESSORIES
$
LIGHTING
Pair
LICENSE PLATE ACCESSORIES
MSRP 179.95
Unit
Honda VT750 ACE, Pair of steel covers to replace OEM ABS. 53-406
FLAGS & FLAG POLE MOUNTS
Chrome Side Covers
FRAME COVERS + SWING ARM COVER + ACCENTS
Cruiser Accessories
82-216
55-306
53-416
Frame Covers Pair of stamped steel chrome accents to cover the black swing arm area. Attaches with double sided tape provided.
71-315 63-123A
63-211 55-358
Frame Covers
63-211
Chromed Arm Frame Covers the vertical swing arm.
Fitment
Part No. Unit MSRP
Honda Valkyrie & Valkyrie Interstate
1-325
Set
Honda VTX1300 C/R/S (3pc kit)
55-306
Kit
$
Honda VTX1800
55-124
Pair $135.95
Fitment
Honda VT1300 Stateline, Interstate, Sabre
55-358
Pair
$
Kawasaki VN900 Classic/Custom 2006-2012 (Steel)
71-315
Pair
$
Kawasaki VN2000 2004-2008 & Classic 2006-2010(Steel)
71-123
Pair
$
Suzuki Boulevard C50/M50, VL800, & Volusia 2001-2004 (ABS)
82-216
Pair
$
Yamaha VStar 950 (ABS)
63-211
Pair
129.95
119.95 99.95
$
139.95
135.95
Swing Arm Accent Trim
129.95
MSRP
59.95
Honda VT750 Aero, Phantom & Spirit C2 (3 pc) 53-416
129.95
Part No. Unit
$ $
Four piece trim set in tear drop design. Mount with double adhesive tape.
Fitment
Pair
Part No.
Honda VT750 Shadow, ACE, R/S & 53-402 Spirit DC Not C2
Unit Set (4pc.)
MSRP $
65.95
Swing Arm Pivot Caps Caps are 1-5/8” in diameter. Fitment
Part No.
Unit
MSRP
Plain Honda VT600, VT750 R/S & Spirit
1-246
Pair
$
14.95
63-215
Swing Arm Covers
53-437
MSRP
Swing Arm Accent
$
119.95
Fitment
Part No.
Unit
MSRP
135.95
Honda VT750 ACE/Spirit
1-251
Pair
$
This bright stamped steel Swing Arm Cover beautifully finishes the side of the Honda VT750 Aero/Spirit C2. Swing Arm Cover has 3M Dual Lock™ fasteners and is easily removable to allow for tire changing. Fitment
Part No.
Unit
Honda VT750 Aero, Phantom & Spirit C2
53-437
Each
Yamaha VStar 950
63-215
Pair
52
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
44.95
AUDIO
B E LT C O V E R + D R I V E S H A F T C O V E R S + S H O C K B O LT C O V E R S
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS
Chrome CNC four piece set covers the shock bolts with set screws provided. Fitment
Part No.
Honda VTX1300/1800 2002-2005
55-115
MSRP 79.95
Set (4pc.)
$
Set (4pc.)
$
59.95
This ABS Chrome Belt Cover adds something extra to the rear of your bike, giving your bike a whole new look.
82-230
2
Fitment
Part No.
Unit
Yamaha VStar 950/1300
63-202
Each
MSRP 109.95
$
Drive Shaft Covers
Fitment
Unit
MSRP
Honda VT750 Aero, Phantom, 55-127 Spirit C2, VT1100, & VTX1300 C/R/S, VTX1800 C/F/N/R/S
Each
$
82-230
Each
$
2
55.95
AT V ACCESSORIES
Suzuki VL800, C50, & M50 2001
Part No.
CAN AM ACCESSORIES
Stamped steel chrome piece to fit over the drive shaft. Mounts with double sidedtape.
64.95
Drive Shaft Bolt Covers
Set of 4 CNC covers for the Drive Shaft Bolts. Part No.
Honda Valkyrie, VT750 Aero, Phantom, 1-317 Spirit, VT1100, & VTX1300/1800
Unit Set (4pc.)
MSRP $
FLAGS & FLAG POLE MOUNTS
Fitment
TOURING ACCESSORIES
1
1
Chrome Belt Cover
CRUISER ACCESSORIES
CNC Billet Honda VT750 Shadow ACE 1-250
Unit
WINDSHIELDS
Rear Shock Bolt Covers
36.95
LICENSE PLATE ACCESSORIES
Fitment
Part No.
Unit
MSRP
Honda VT750 Aero, Phantom, Spirit C2, VT1100 Sabre/Spirit, VTX1300/1800
55-134
Each
$
39.95
Show Chrome Accessories® tear drop design is cut from this Drive Shaft Cover adding an alluring accent to the side of Yamaha motorcycles. This Drive Shaft Cover features easy installation and comes with all the hardware needed for installation. Dimension 13”L x 6-1/4”W x 3/4”D. Fitment
Part No.
Unit
MSRP
Yamaha V Star 650/1000 Classic/Custom
63-129
Each
$
www.bigbikeparts.com
•
GENERAL ACCESSORIES
This drive shaft bolt trim covers black OEM mounting bracket and bolts with bright Show Chrome steel. Shown here with 55-127, Drive Shaft Cover.
LIGHTING
Drive Shaft Cover
Drive Shaft Bolt Trim
94.95
E-mail us info@bigbikeparts.com
53
SADDLEBAG SUPPORT STAYS + SADDLEBAG ACCESSORIES
Cruiser Accessories 71-119
55-117
63-610
63-303
Saddlebag Support Stays Chrome steel supports mount to rear fender bracket with new hardware. Holds saddlebags away from brake caliper, swing arms and rear tire. No drilling required. Additional hardware may be required if an aftermarket backrest other than Show Chrome Accessories has been installed. Fitment
Part No.
Unit
MSRP
Honda VTX1300 R/S 2003-2009 & VTX1800 N/R/S/T 2002-2008
55-117
Pair
$
69.95
Kawasaki VN900 Classic/Custom 2006-2012; VN2000A 71-119 & Classic 2004-2010
Pair
$
69.95
69.95
Suzuki C50/M50 Boulevard 2005-2008 & VL800 Volusia 82-209 2001-2004
Pair
$
69.95
$
69.95
63-610
Pair
$
69.95
Yamaha Road Star & VStar 1100 Classic
69.95
$
Yamaha VStar 950 2009-2010 & VStar 1300 2007-2009
63-303
Pair
$
69.95
Fitment
Part No.
Unit
MSRP
Honda VT600 1999-2007
53-715
Pair
$
69.95
Honda VT750 ACE 1998-2003
53-415
Pair
$
69.95
Honda VT750 Aero, Phantom & Spirit C2, Not Sabre
53-417
Pair
$
69.95
Honda VT750 Spirit DC 2002-2008
53-450
Pair
$
69.95
Honda VT1100 Sabre 2000-2008
53-115
Pair
$
Honda VT1100 Spirit 1996-2008
53-125
Pair
Honda VTX1300C 2004-2009 & VTX1800 C/F 2002-2008
55-130
Pair
Adjustable Saddlebag Stays
Saddlebag Lift Tab Covers
Adjustable position saddlebag stays allow for custom positioning of the saddlebags forward or back. Mounts to strut with included hardware. Fitment
Part No.
Unit
Yamaha Road Stars & V Stars
63-125
Set
54
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
MSRP $
•
89.95
Dimension 2-3/8”L x 5/8”W x 3/8”H. Fitment
Part No.
Unit
MSRP
Honda Hard Bags
1-316
Pair
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
19.95
Part No.
Unit Each
MSRP $
349.95
53-440
Unit Kit
$
259.95
MSRP
Honda VTX1300 C 2002-2009 & 1800 C/F
55-136
Kit
$
259.95
Honda VTX1300 R/S & VTX1800 N/R/S/T 2002
55-320
Kit
$
259.95
Kawasaki VN900 Classic/Custom 2006-
71-319
Kit
$
259.95
Kawasaki VN2000 2004-2010
71-130
Kit
$
259.95
Suzuki C50/VL800 Boulevard 2001-2008
82-228
Kit
$
259.95
Yamaha VStar 950, 1300
63-208
Kit
$
259.95
Yamaha VStar 1100 Classic & Road Star 1999-2008
63-612
Kit
$
259.95
Luggage Rack
Part No.
Unit
Honda GL1500, GL1800, Valkyrie Interstate, & Yamaha Royal Star Venture
52-610
Each
MSRP 119.95
$
FLAGS & FLAG POLE MOUNTS
Fitment
AT V ACCESSORIES
Large Cruise Tour Trunk Rack for Honda GL1500/ GL1800, Valkyrie Interstate and Yamaha Royal Star Venture. Limit loading to manufacturer’s trunk specs. Dimensions 24”L x 13”W x 7-1/2”H.
CAN AM ACCESSORIES
Part No.
Honda VT750 Aero 2004-2007
TOURING ACCESSORIES
Fitment
CRUISER ACCESSORIES
Honda GL1500/GL1800 Gold Wing, 52-703 Valkyrie Interstate, & Yamaha Royal Star Venture
WINDSHIELDS
Fitment
63-208
LUGGAGE & BAGS
Rack has a black rubber center inlay for a distinctive look. Mounts to trunk lid using hardware provided. Drilling required. Works with Hondaline spoiler. Dimensions 23-5/8”L x 14”W x 6-1/4”H.
The Sissy Bar Kit is designed with your passenger in mind. The heavy duty 3/4” CNC finished sissy bar provides durability for your passenger, while the sissy pad adds extra comfort. The Sissy Bar Kit includes mounting hardware, sissy bar, sissy bar mounts, and sissy pad. Vinyl matches OEM seat. For added style, many of our Sissy Bar Systems are compatible with Show Chrome Accessories® Saddlebag Stays & Sissy Bar Luggage Rack. Use with 55-322 Rack below. Dimensions Hoop: 15”H; Backrest Pad: 10”H x 8”W x 2-1/2”D.
COVERS
Luggage Rack
PEGS, BOARDS & GRIPS
Sissy Bar Kits
AUDIO
SISSY BAR KITS + LUGGAGE RACKS + ACCESSORIES
LICENSE PLATE ACCESSORIES
1 ⁄4” hole, 1-1/4” Dia. 4-231
Unit 10 Pack
MSRP 19.95
$
Fitment
Part No.
Unit
Fits All Show Chrome Accessories® Sissy Bar Kits
55-322
Set
www.bigbikeparts.com
•
MSRP $
209.95
E-mail us info@bigbikeparts.com
55
GENERAL ACCESSORIES
The elegantly styled Sissy Bar Luggage Rack is designed to hold all sizes of luggage bags from bulky to small. The luggage rack mounts to Show Chrome Accessories® Sissy Bar Kits. License Plate Relocation Bracket (71-129) is required for properly mounting Sissy Bar Luggage Rack to the Kawasaki VN2000. Dimensions 10-3/4”L x 11”W x 1/4”D.
Star Washers Part No.
LIGHTING
Sissy Bar Luggage Rack
SOLO RACKS
Cruiser Accessories 82-221
Solo Racks
Fitment
Part No.
Honda VT750 Aero
53-448
Kit
$
89.95
Suzuki Volusla VL800/C50
82-221
Kit
$
89.95
62-114
Kit
$
89.95
63-207
Kit
$
89.95
63-131
Kit
$
89.95
63-305
Kit
$
89.95
This Solo Rack adds a nice Show Chrome touch to the rear fender Yamaha Road Star Yamaha VStar 950 replacing the rear pillow seat. Mounts to existing points with included hardware. Rack size: 11-3/4” L x 6-1/2” W. Yamaha VStar 1100 Classic Yamaha VStar 1300
Unit
MSRP
55-126
Curved Solo Racks This Solo Rack is made of die-cast aluminum alloy and is lightweight, giving a cast billet look at an affordable price. Fresh new curved design is sure to add a unique style to your Cruiser. Replaces the rear pillow seat, making a striking accent to the rear fender. Curved Solo Rack features easy no drill installation. Rack comes complete with all the hardware needed for mounting. Rack size: 12-1/4” L x 8” W. 135.95
Built with high luster chrome plated steel tube. The Trike Fender Racks will fit most aftermarket trike bodies and are easily installed with the supplied hardware. Rack size: 12” L x 6-1/4” W.
135.95
Fitment
Part No.
Unit
135.95
Most trike side fenders and curved saddlebag lids
41-130
Pair
Fitment
Part No.
Honda VTX1300 R/S 2003-2009 & VTX1800 R/S 2002-2008
55-126
Kit
$
Honda VTX1300C 2004-2009 & VTX1800 C 2002-2008; Not F 55-139
Kit
$
71-124
Kit
$
Kawasaki VN2000 2004 - 2008 & Classic 2006-2010
56
Unit
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
MSRP
•
Trike Fender Racks
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP 149.95
$
PEGS, BOARDS & GRIPS
H50-520CF
AUDIO
TUXEDO TIES AND TAILS
COVERS LUGGAGE & BAGS WINDSHIELDS
Map Pouches For TuxedoTies
TM
Part No.
Unit
MSRP
Map Pouch
H50-MPBK
Each
$
24.95
H50-508BO
Tank Dividers – Signature Series & Carbon Fiber
TOURING ACCESSORIES
Description
Y60-321BO
TM
Each
$
59.95 H50-201CF
Each
$
59.95
Honda VT600, & VT1100 Spirit, ACE Sabre
H50-372BO
Each
$
59.95 H50-372CF
Each
$
59.95
Honda VT750 ACE 2001-2003
H50-345BO
Each
$
59.95 H50-345CF
Each
$
59.95
Honda VT750 Aero & Spirit C 2001-2008; Spirit & H50-353BO Phantom C2 2007-2010
Each
$
59.95 H50-353CF
Each
$
59.95
Honda VT1300 Interstate, Stateline & Sabre
H50-520BO
Each
$
59.95 H50-520CF
Each
$
59.95
Honda VTX1300
H50-507BO
Each
$
59.95 H50-507CF
Each
$
59.95
Honda VTX1800 R/N/T 2002-2008
H50-512BO
Each
$
59.95 H50-512CF
Each
$
59.95
Honda VTX1800 C/F 2002-2008
H50-506BO
Each
$
59.95 H50-506CF
Each
$
59.95
Kawasaki Drifter, Nomad 1996-2003, & VN1500 Classic
K70-111BO
Each
$
59.95 K70-111CF
Each
$
59.95
Kawasaki VN900
K70-301BO
Each
$
59.95 K70-301CF
Each
$
59.95
Kawasaki VN2000 A & D, (not Classic)
K70-112BO
Each
$
59.95 K70-112CF
Each
$
59.95
MSRP
Part No.
Unit MSRP
Suzuki C50/VL800
S80-222BO
Each
$
59.95 S80-222CF
Each
$
59.95
Honda VT750 Ace
H50-347BO
Each
19.95
Yamaha Road Star
Y60-401BO
Each
$
59.95 Y60-401CF
Each
$
59.95
19.95
Yamaha VStar 650 Classic/Custom
Y60-311BO
Each
$
59.95 Y60-311CF
Each
$
59.95
Yamaha VStar 950 (small pouch)
Y60-321BO
Each
$
59.95 Y60-321CF
Each
$
59.95
Yamaha VStar 1100 Classic/Custom 1999-2009
Y60-313BO
Each
$
59.95 Y60-313CF
Each
$
59.95
Yamaha Venture 1999-2010
Y60-101BO
Each
$
59.95 Y60-101CF
Each
$
59.95
Honda VTX1300/1800 Retro Yamaha Road Star, V Star 650/1100 Classic, VTX1300C, & VTX1800 C/F
H50-508BO Each Y60-312BO
Each
$ $
19.95
$
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
57
GENERAL ACCESSORIES
Fitment
LIGHTING
H50-201BO
LICENSE PLATE ACCESSORIES
Honda GL1500 Valkyrie & Tour
Carbon Fiber Unit MSRP Part No.
FLAGS & FLAG POLE MOUNTS
Motorcycle riders have the ability to replace their rear pillow seat with a beautiful Tuxedo Tail from Hopnel™. They can make a bold statement with this textured black Tuxedo Tail. Tuxedo Tails easily mount with existing hardware into existing mounting locations. Made in the USA.
Unit
AT V ACCESSORIES
TM
Fitment
Signature Series Part No.
CAN AM ACCESSORIES
Choose our traditional Signature Series™ Tuxedo Tie™ with textured black material or our Carbon Fiber look. Both have non-marring felt backs to protect the gas tank and come with a convenient removable storage pouch. Optional Map Pouch (H50-MPBK) can snap to Buddy Lock system to allow an easy to read map display. “BO” for Signature Series “CF” for Carbon Fiber. Made in the USA.
Signature Series Tuxedo Tails
CRUISER ACCESSORIES
Easy, quick release Map Pouch with Buddy Lock system. Twists on and off easily and fits a 8.5”x11” sheet of paper. Vinyl map window is UV stabilized so the map won’t fade or stick to the pouch.
TANK ACCESSORIES + RAIN GATORS
Cruiser Accessories Twin Pouches Adds handy, convenient storage. Ideal for fork lock, cell phone, gloves, etc. Twin Pouches slip on the rubber divider on Softail, Heritage or any Harley-Davidson with twin gas tanks and rubber bib. Fitment
Part No.
Unit
MSRP
Softail, Heritage or any Harley-Davidson with twin gas tanks & rubber bib
HDSTP-1
Each
$
49.95
4-244R
3 Piece Tank Pad Rubber tank pads come in 3 pieces and attach with adhesive on back of pad. Constructed of rubber with raised features. Comes in many colors.
Gas Tank Protector Mechanic’s apron offers a protective cover for the gas tank to prevent scratches and dings while working on the bike. Non-marring felt back. Hook and loop strap attaches around the yoke on most cruiser motorcycles. Description
Part No.
Unit
MSRP
Gas Tank Protector
H50-502BK
Each
$
29.95
Description
Part No.
Unit
MSRP
Blue/Black
4-244B
Each
$
Green/Black
4-244G
Each
$
Red/Black
4-244R
Each
$
Yellow/Black
4-244Y
Each
$
16.95 16.95 16.95 16.95
Rain Gators Hopnel’s redesigned compact, easy to wear Rain Gators incorporate water resistant nylon, heat shields to prevent melting, and non-slip boot and toe shift pads. The calf area has anti-billowing elastic gussets and the upper thigh has rubberized nonslip pads. Rain Gators are perfect for occasions when a full rain suit is not necessary.
58
1 Piece Tank Pad Comes in many colors as one piece Constructed of rubber with raised features. Attaches to bike with adhesive on back of pad. 6” H x 5” W.
Description
Part No.
Unit
MSRP
Description
Part No.
Unit
MSRP
Rain Gators
RG200
Pair
$
29.95
Green/Black
4-246G
Each
$
22.95
Silver/Black
4-246S
Each
$
22.95
Yellow/Black
4-246Y
Each
$
22.95
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
PEGS, BOARDS & GRIPS
* S e e To u r i n g S e c t i o n fo r a l l F i t m e n t s and Custom Motorcycle Part options
AUDIO
Touring Accessories LED Headlight End Trim pg68 Wind Deflector pg75
LUGGAGE & BAGS
Chrome Mirror Back Trim pg69
COVERS
Windshield pg22 LED Visored Mirror Back Trim pg69
LED Turn Signal Lights pg69
WINDSHIELDS CRUISER ACCESSORIES
Chrome Windshield Garnish Vent Accents pg69
TOURING ACCESSORIES
LampGard T M Headlight Protector pg68
CAN AM ACCESSORIES AT V ACCESSORIES
LED Day-Running Light pg68
FLAGS & FLAG POLE MOUNTS
Medallion Series T M Front Fender Accent pg66
Front Fender Accent pg66
LICENSE PLATE ACCESSORIES
Fender Accent Fillers pg66 LED Lower Fog Light Kit pg67
GENERAL ACCESSORIES
Chrome Lower Front Cowl pg67
Reflector Grille pg66
www.bigbikeparts.com
LIGHTING
Lighted Front Rotor Cover pg65
Chrome Timing Chain Cover pg67
•
E-mail us info@bigbikeparts.com
59
Touring Accessories LED Master Cylinder Switch pg72 Windshield pg22 LED Visored Mirror Trim pg69
Chrome Mirror Back Trim pg69 LED Turn Signal Lights pg69
Chrome Windshield Garnish Vent Accents pg69 LE D Headlight End Trim pg68 LED Day-Running Light pg68
Side Fairing Emblem Accents pg71
Fender Accent Fillers pg66
Medallion Series T M Front Fender Accent pg66
Front Fender Accent pg66
Belly Pan pg71
LED Lower Fog Lights pg67
LED Vertical Air Intake pg71
Lighted Front Rotor Covers pg65
60
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Chromed Timing Chain Cover pg67
Front Lower Cowl pg67
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
* S e e To u r i n g S e c t i o n fo r a l l F i t m e n t s and Custom Motorcycle Part options
COVERS
Chrome Levers pg73
PEGS, BOARDS & GRIPS
Chrome Comfort Grip pg12 Chrome CB Controller Cover pg74
AUDIO
BIG BIKE PARTS HAS MANY CUSTOM DESIGNED FITMENTS FOR HARLEY, HONDA, KAWASAKI, SUZUKI, AND YAMAHA
CB Antenna pg5
Flags & Flag Pole Mounts pg113 LUGGAGE & BAGS WINDSHIELDS
Rear Speaker Trim pg74 CRUISER ACCESSORIES TOURING ACCESSORIES
Passenger Armrest pg78
CAN AM ACCESSORIES AT V ACCESSORIES
Drivers Backrest pg78
FLAGS & FLAG POLE MOUNTS
Chrome Exhaust Tips pg87
Chrome Engine Side Cover pg80
Battery Side Covers pg81
Saddlebag Scuff Accent pg81
LIGHTING
Drivers Peg pg6
LICENSE PLATE ACCESSORIES
Chrome Frame Covers pg80
Passenger Floorboard Side Covers pg80
GENERAL ACCESSORIES
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
61
Touring Accessories LED Master Cylinder Switch pg72
Chrome CB Controller Cover pg74
Windshield pg22 LED Visored Mirror Trim pg69 Chrome Mirror Back Trim pg69 LED Turn Signal Lights pg69
Double Pocket pg77 Windshield Garnish pg68 Amber LED Windshield Garnish pg68
LED Day-Running Light pg68
Mini Halogen Driving Lights pg65
Medallion Series Front Fender Accent pg66
Martini Fairing Accent pg70 Front Fender Extension pg66 LED Martini Front Fender Accent pg66
62
Caliper Cover pg65
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Fairing Air Intake Accent Grilles pg70
•
LED Lower Fog Lights pg67
Chromed Timing Chain Cover pg67
Longer Offset Extension pg9
Front Lower Cowl pg67
Chrome Rear Lower Cowl pg82
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
Chrome Comfort Grip pg12
COVERS
CB Antenna pg5
Chrome Levers pg73
Handlebar Dampners pg73
PEGS, BOARDS & GRIPS
* S e e To u r i n g S e c t i o n fo r a l l F i t m e n t s and Custom Motorcycle Part options
AUDIO
BIG BIKE PARTS HAS MANY CUSTOM DESIGNED FITMENTS FOR HARLEY, HONDA, KAWASAKI, SUZUKI, AND YAMAHA
Flags & Flag Pole Mounts pg113 LUGGAGE & BAGS WINDSHIELDS
Contour Trunk Rack pg83
Rear Speaker Trim pg74 CRUISER ACCESSORIES
LED Martini Trunk Light Set pg84
TOURING ACCESSORIES
Passenger Armrest pg78
CAN AM ACCESSORIES
Passenger Armrest Pouch pg78
AT V ACCESSORIES
Drivers Backrest pg78 LED Martini Saddlebag Light Set pg84
FLAGS & FLAG POLE MOUNTS
LED Martini Air Dam pg84
Chrome Exhaust Tips pg87
LICENSE PLATE ACCESSORIES
Saddlebag Scuff Pads pg82
Engine Cover Scuff Pad pg82 Heel-Toe Shifter Kit pg79 Martini Opera Light Set pg70
Passenger Floorboard Bottom Light pg79 Wind Deflector Upper & Lower pg75 Chrome Frame Covers with Rubber Inserts pg80
GENERAL ACCESSORIES
Driver Mini Boards pg7
Battery Side Cover Trim With Rubber Inserts pg81
LIGHTING
Tank Scuff Pad pg82
Passenger Floorboard Side Covers pg80
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
63
Touring Accessories * S e e To u r i n g S e c t i o n fo r a l l F i t m e n t s and Custom Motorcycle Part options C.B. Antenna pg5
Flag Pole pg113
Trunk Rack pg83
Trunk Lens Grilles pg 85
LED Trunk Lights pg84
Trunk Key Accent pg86
Taillight Lens Accents pg87
LED License Plate Holder pg114
LED Rear Fender Tip pg87
Die Cast Exhaust Tips pg87
64
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
PEGS, BOARDS & GRIPS
Touring Accessories
AUDIO
GL1800 FRONT
52-624
COVERS LUGGAGE & BAGS WINDSHIELDS
52-624A
Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2010, 2012 non airbag
52-764
Pair
$
79.95
Description
Part No.
Unit
Tri-Color Lighted Rotor Covers 2001-2010, 2012
52-624
Pair
$
299.95
MSRP
Chrome All Amber Lighted Rotor Covers 2001-2010, 2012
52-624A
Pair
$
299.95
Replacement Tri-Color LED Light Strip
10-2624
Pair
$
Replacement Amber Light Strip
10-2624A
Pair
$
145.95 119.95
CAN AM ACCESSORIES
Sleek and sporty chromed ABS Caliper Covers match the front contour of the OEM covers and offer a clean look. Mounts with hardware provided.
TOURING ACCESSORIES
Front Caliper Covers
CRUISER ACCESSORIES
Lighted Front Rotor Covers Rotor Covers with a circle of tri-color LED lights on the outer edge (amber points outward, red and blue points inward). There are 38 LEDs in outer ring edge on each side, and also a 9 amber LED light at the bottom of the fork for added side visibility. The lights are enclosed in a weather resistant housing. Fits Honda GL1800 Gold Wing (non airbag models).
AT V ACCESSORIES FLAGS & FLAG POLE MOUNTS LICENSE PLATE ACCESSORIES
52-757
Mini Halogen Driving Lights
Chromed ABS Front Rotor Covers are installed on the front forks with its own mounting hardware. Part No. Unit
Honda GL1800 (not airbag models) 2001-2010, 2012
52-654
Pair
MSRP 149.95
$
Fitment
Part No.
Honda GL1800 2001-2010
52-757
Kit
Replacement Bi-pin Glass Reflector for 16-104 Light
10-1624
Each
www.bigbikeparts.com
•
Unit
MSRP 189.95
$
10.95
$
E-mail us info@bigbikeparts.com
65
GENERAL ACCESSORIES
Fitment
LIGHTING
Chrome Front Rotor Covers
These Mini Halogen Driving Lights are truly the smallest spotlights available, utilizing a bright 50 watt high intensity halogen bulb. Set comes with everything needed for installation, including: lights, mounting bracket, wire harness, switch and relay. By upgrading the provided rocker switch with the Master Cylinder Switch Block Assembly (52-605, 52-605L, 52-705, 52-705LM), the hand controls stay uncluttered.
GL1800: FRONT
Touring Accessories 3
52-651
1
2
Front Fender Rail 4
This custom designed Front Fender Rail incorporates a 3/8” diameter upper rail and a 1/2” diameter bottom rail. The rails securely attach with four hard mounts.
Medallion Series Front Fender Accent TM
Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2013
52-602
Each
$
The Medallion Series™ offers three unique dimensional contoured front fender accents for the GL1800. There is a chromed ABS accent with a black high gloss acrylic insert, amber LED light accent and clear LED light accent. The medallion accent measures 3-1/2” by 1-1/2” in size and are secured with double sided tape provided. The LED light accent requires drilling during installation to route wiring. All necessary wiring included to wire as running lights. Fits Honda GL1800. Fitment
Part No. Unit
MSRP
2 Amber LED Accent Honda GL1800 2001-2013
52-651
Each
$
35.95
Clear LED Accent Honda GL1800 2001-2013
52-751
Each
$
35.95
1 Black High Gloss Accent Honda GL1800 2001-2013
52-650
Each
$
Amber Replacement Lens
16-2651L Each
Front Fender Extension Show Chrome Accessories® Chrome Front Fender Extension is perfectly contoured to the front fender. Fender Extension is made of chromed ABS and extends the front fender down 7”. Installation requires drilling. Comes with fender brackets.
19.95 $
2.95
NEW Fender Accent Fillers
Fitment
These Fender Accent Fillers add the look of speed to your GL1800 Goldwing, even while it is sitting still. These stylish accent grilles are made from ABS, with Show Chrome Accessories® quality chrome finish. While they snap in place, they are additionally secured with double sided tape. Fitment
Part No. Unit
MSRP
3 Honda GL1800 2001-2013
52-801
$
Pair
74.95
Part No. Unit MSRP
Honda GL1800 2001-2010 (non airbag models) 52-749
Kit
$
49.95
Front Fender Extension
24.95
The Front Fender Extension made of chromed ABS is 6-5/8” high and extends the fender 4” longer than OEM to help protect lower cowl. Secures with a two screw installation and double sided tape provided.
52-737
Fitment
Part No. Unit MSRP
Honda GL1800 (non airbag models) 2001-2013
52-601A Each $32.95
Billet Front Axle Cover The Front Axle Cap covers up those unattractive side axle nuts, giving them a smooth, clean look. Installs on the front side axle nut and requires one cap on each side.
Martini Front Fender Accent The Front Fender Accent with or without 8 luminous amber LEDs on each side and is secured to the fender with double sided tape provided. Installation requires drilling through fender for wiring. Fitment
Part No.
Unit
MSRP
Amber LED Honda GL1800 2001-2013
52-737
Pair
$
4 Plain Honda GL1800 2001-2013 (Shown at top of page)
52-648
Pair
$
66
•
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
65.95
Fitment
Part No. Unit
MSRP
34.95
Honda GL1800, GL1500 Valkyrie
1-321
$
Each
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
19.95
AUDIO
GL1800: FRONT
PEGS, BOARDS & GRIPS COVERS
Halogen Lower Fog Light Kit
52-604
Kit
$
239.95
MSRP
52-704
Kit
$
239.95
52-804
Kit
$
239.95
52-904
Kit
$
239.95
Replacement Components
Part No. Unit MSRP 7.95
$
Replacement Lens (blue) Fits 52-704 & 52-904 10-704L Each
$
10-604L Each
$
Replacement Lens (clear) Fits 52-604 & 52-804
10.95 10.95
Each
$
Replacement Switch for 52-604, 52-704, & 52-805 Fog Light Kits
16-34
Each
$
49.95
Replacement Switch for 52-804, 52-806, 52-904 Fog Light Kits
16-36
Each
$
49.95
19.95
Fitment Honda GL1800 2001-2010 (non airbag models) (clear) Honda GL1800 2006-2010 (airbag models), all 2012-2013 models, (clear)
Unit Kit
52-806
Kit
$ $
MSRP 399.95 399.95
Chrome Lower Front Cowl
Fitment
Part No.
Unit
Honda GL1800 2001-2010, 2012
52-739
Each
MSRP
115.95
$
Fitment
Part No. Unit
Honda GL1800 2001-2013
52-818
MSRP 159.95
$
Lower Front Cowl
TM
These clear acrylic Round LampGards™ protect the driving/fog lights from flying rocks and other road debris. Securely attaches with 3M Dual Lock™ fasteners. Fits OEM and BBP driving/fog lights. BBP#52-604, 52-704, 52-804, 52-805, 52-806 & 52-904
Fitment
Part No. Unit
MSRP
Honda GL1800 Lower Fog Light
52-718A
$
Kit
10.95 www.bigbikeparts.com
•
Fitment
Part No. Unit
Honda GL1800 2001-2013
52-608
Each
MSRP
110.95
$
E-mail us info@bigbikeparts.com
67
GENERAL ACCESSORIES
The chromed ABS Lower Front Cowl replaces the OEM gray plastic on the GL1800 Gold Wing. This design has reinforced tabs for a stronger secure fit and will work with both OEM and Show Chrome Accessories® Lower Fog Light. Mounts with existing hardware.
LIGHTING
3-1/3” Round LampGard Protectors
Each
LICENSE PLATE ACCESSORIES
This chromed stamped steel timing chain cover covers the brushed aluminum OEM cover for a bright look. Chromed zinc cap replaces OEM cap. Attaches with double sided tape provided.
FLAGS & FLAG POLE MOUNTS
Chromed ABS Lower Front Cowl replaces the OEM plastic on the GL1800 Gold Wing. This new lower front cowl has a stylish flair and a brilliant chrome finish. It has reinforced tabs for a stronger secure fit and will work with both OEM and Show Chrome Accessories® Lower Fog Light. Mounts with existing hardware.
AT V ACCESSORIES
Chromed Timing Chain Cover & Replacement Cap
Part No. 52-805
CAN AM ACCESSORIES
Replacement Relay for all BBP Lower Fog 16-33 Light Kits
These LED lights provide a bright white light that is low and horizontal which is great for rain and fog or highlighting deer and other wildlife that lurk in the night. To help insure you are getting the quality light you deserve, Big Bike Parts has designed the photometrics to improve your safety and achieve DOT approval. Providing more illumination for you to see and be seen while also creating better reaction time and a safer riding experience. These 3-1/2” lights are fully adjustable for driving, allowing you to place the light where you need it. Factory water tight seal. As always these kits are easily installed and come with our OEM quality illuminated switch for either a standard GL1800 or for the airbag model.
TOURING ACCESSORIES
Replacement Bulb 12V 34W for 52-604, 52- 10-2604 Each 704, 52-804 & 52-904 Fog Light Kits
LED Lower Fog Light Kit
CRUISER ACCESSORIES
Part No. Unit
Honda GL1800 2001-2010 (non airbag models) (clear) Honda GL1800 2001-2010 (non airbag models) (blue) Honda GL1800 2006-2013 (airbag models) (clear) Honda GL1800 2006-2013 (airbag models) (blue)
WINDSHIELDS
Fitment
LUGGAGE & BAGS
This Fog Light Kit includes all necessary wiring, lights and switches to mount to the GL1800 to provide the same quality level as OEM. Plugs into existing wire harness, no splicing required. Includes H3, 35W halogen lights. Glass lens measures 4” in diameter. Also available in a blue lens for better clarity. Fits Honda GL1800 Gold Wing with hi beam over ride option.
FLO G 1 8O 0R0B: O FA RR ODNS T + B R A K E + S H I F T E R C O V E R S
Cruiser Accessories Touring 1
1
2
4
2
Chrome Windshield Garnish 1
3
Add a personal touch with this chromed ABS windshield garnish that quickly replaces the stock garnish.
Chromed Windshield Garnish 1
52-810
The Chromed Windshield Garnish trim piece quickly mounts to replaces the OEM painted garnish giving your bike a custom look. Comes with windshield rubber gasket already in place. Fitment
Part No.
Unit
Honda GL1800 2001-2013
52-795
Each
MSRP 169.95
$
Headlight End Trim
2
Fitment
Part No. Unit
Honda GL1800 2001 - 2013
52-641
Each
MSRP 119.95
$
Front Fairing Nose Trim 2
Chromed ABS piece to replace stock OEM nose trim. Mounts with existing hardware. Fitment
Part No. Unit MSRP
Honda GL1800 2001 - 2013
52-681
Each
$
59.95
The Headlight End Trim replaces the dull black textured plastic at the end of the headlights with either a high luster chrome finish or our LED chrome lighted version. The Headlight End Trim mounts into the existing space and instantly brings life back to the front fairing. Fitment
Part No.
Unit
MSRP
Chrome Headlight End Trim Honda GL1800 2001 - 2013
52-810
Pair
$
LED Chrome Headlight End Trim Honda GL1800 2001 - 2013
52-811
Pair
$
3
45.95 89.95
LED Day-Running Light
ABS Chrome Front Fairing Nose Trim has been designed with 18 Hi-Intensity LEDs for Day-Running Light to improve and enhance safety. Replaces the OEM Front Fairing Nose Trim. Installs easily, comes with t-taps to wire into low beam headlights, handlebar on/off accessory switches or other use preferences. Fitment
Part No.
Unit
Honda GL1800 2001 - 2013
52-807
Each
LampGard Headlight Protector 4
MSRP
109.95
$
TM
The clear Headlight Protector is designed to cover the entire GL1800 headlight, which Fitment Part No. Unit MSRP offers superior protection against flying rocks Honda GL1800 20012013, Pair $49.95 52-699 or other road debris. Securely attaches with 3M Dual Lock™ fasteners. Dimension 14”Wx 6”H. & F6B model
68
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Amber LED for Windshield Garnish Amber LED Windshield Garnish features 13 amber LEDs to perfectly accent the front of the GL1800. Amber LED Windshield Garnish Accent easily mounts on the underside of the windshield garnish with double sided tape provided. Plugs into existing wire harness, no splicing required. Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2005
52-697A
Each
$
34.95
Honda GL1800 2006-2010
52-756
Each
$
34.95
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
AUDIO
GL1800: FRONT
PEGS, BOARDS & GRIPS COVERS
Mirror Back Trim
Part No. Unit MSRP
Honda GL1800 2001-2013 (not F6B)
52-763
Pair
$
29.95
NEW Chrome Windshield Garnish Vent Accents
WINDSHIELDS
Fitment
LUGGAGE & BAGS
Chromed ABS Mirror Back Trim adds a bright chrome trim to the mirror back and front turn signals. The trim matches Show Chrome Accessories® Trunk and Saddlebag Light Grilles (52-744, 52-745, 52-774, & 52-775).
Fitment
Part No.
Unit
MSRP
Honda GL1800 2012 - 2013
52-796
Pair
$
39.95
TOURING ACCESSORIES
Mirror Back Accent
Fitment
Part No. Unit MSRP
Honda GL1800 2001-2013 (not F6B)
52-628
$
CAN AM ACCESSORIES
The chromed ABS Mirror Back Accent Grilles mount to the side view mirrors on the GL1800 outlining the turn signal lens. Attaches with double sided tape provided. Pair
45.95
AT V ACCESSORIES
2
52-727
1
52-747A Pair
$
Red Honda GL1800 2001-2005
52-727
Pair
$
Amber Honda GL1800 2006-2013 (not F6B) 52-755
Pair
$
Unlighted Visored Mirror Trim Honda GL1800 2001-2013 (not F6B)
Pair
52-683
MSRP 109.95 109.95 109.95 $
59.95
Fitment
Part No.
Unit
Clear Lens, Amber LED Honda GL1800 2001-2005
52-743
Pair
$
Clear Lens, Amber LED Honda GL1800 2006-2013 (not F6B)
52-754
Pair
$
Clear Lens, Amber Incandescent Bulb Honda GL1800
52-733
Pair
Replacement Amber 7443 bulb 12V 21/5W Wedge
10-7443A
Each
2
MSRP 125.95 125.95 74.95
$
7.95
$
Contours Mirror Back
This Chrome Contour Mirror Back Accent combines our contoured trim design with a fresh turnsignal grille. This contoured grille matches our saddlebag light, trunk light and speaker contour grilles, providing a complete bike matching style. Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2013 (not F6B)
52-808
Pair
$
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
49.95
69
GENERAL ACCESSORIES
Part No. Unit
Amber Honda GL1800 2001-2005
The Clear Lens LED Turn Signal Lights contain 21 amber LEDs for optimal brightness. Plugs into existing wire harness, no splicing required. Requires a Dual Load Equalizer (13-304A) to return turn signals to stock flash rate.
LIGHTING
LED Visored Mirror Trims add a bright chrome visor and LED turn signal to the mirrors of the GL1800. LED turn signals are visible from the rear of the bike, adding safety through visibility while turning or changing lanes. Plugs into existing wire harness, no splicing required.
Clear Lens Turn Signal Light
LICENSE PLATE ACCESSORIES
LED Visored Mirror Trims
FLAGS & FLAG POLE MOUNTS
1
Fitment
CRUISER ACCESSORIES
These bright chrome accents make a great addition to the OEM painted windshield garnish. Attach easily with double sided tape already affixed to the accent trim with easy pull mounting. Fits Honda GL1800 Goldwing 2012-2013 windshield garnish.
GL1800: FRONT
Touring Accessories
Chrome Side Fairing Accent Grille The chromed ABS Accent Grille will dress up the side fairing vent and enhance the line of the radiator grill area. Attaches with double sided tape provided. Fitment
Part No. Unit MSRP
Honda GL1800 2001-2010
52-682
125.95
Pair
$
1
Martini Fairing Accents
2
Martini Fairing Accents for the GL1800 Gold Wing incorporates 43 amber LED’s per side that are imbedded into the ABS chrome. Accent trim can be wired as running and turn signal lights. Attaches with double sided tape provided.
Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2010
52-770
Pair
Replacement LED Strip Bottom
95277OB
Each
$
25.95
Replacement LED Strip Top
95277OT
Each
$
25.95
$
239.95
Martini Air Intake Grilles
Part No. Unit MSRP
Honda GL1800 2001-2010
52-738
Fitment
Part No. Unit MSRP
Honda GL1800 2001-2010
52-620
•
Honda GL1800 2001-2005
52-606
Pair
$
69.95
Honda GL1800 2006-2010
52-750
Pair
$
69.95
Fitment
Part No. Unit MSRP
Honda GL1800 2001-2010
52-617
Pair
$
54.95
65.95
These accents fit into the air intake openings on the front fairing of the Honda GL1800 Gold Wing.
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Part No. Unit MSRP
These Side Fairing Accents are an improved fit over the OEM. Attaches with double sided tape provided.
Fairing Air Intake Accent Grilles
70
Fitment
Chrome Side Fairing Accents
Fitment
$
Radiator Grille
A pair of chromed ABS Radiator Grilles instantly dresses up the side radiator. The Show Chrome Accessories® unique diamond pattern complements the features of the bike and replaces the OEM black plastic.
2
Martini Air Intake Grilles incorporate six amber LED’s on each side, offering added safety through visibility. These Martini Air Intake Grilles function as running and turn signal lights. Grilles are sold as pairs and include all the needed wire connectors.
Pair
1
Pair
$
32.95
Martini Opera Light Set 38 Amber LED’s are included in this stunning accent for the Honda GL1800 Gold Wing. Lights can be used as added turn signals and running lights. Martini Opera Lights attach to the cylinder head with double sided tape. Plugs into existing wire harness. No splicing required. Fitment
Part No. Unit MSRP
Honda GL1800 2001-2005
52-728
Pair
$
Honda GL1800 2006-2010
52-753
Pair
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
109.95 109.95
AUDIO
GL1800: COCKPIT
PEGS, BOARDS & GRIPS COVERS
52-823
LUGGAGE & BAGS
Part No. Unit MSRP
Amber Vertical Reflector. Honda GL1800 2012-2013 (not F6B)
52-823
Pair
$
LED Vertical Light. Honda GL1800 52-824 2012-2013 (not F6B)
Pair
$
Fitment
Part No. Unit MSRP
Honda GL1800 2012 - 2013 (not F6B)
52-815
Pair
$
45.95
CAN AM ACCESSORIES
Fitment
The design is in the details! This ABS chrome accent fits around the Honda GL1800 side fairing emblem, without covering and trying to hide it. The contoured swish is elegantly shaped with multiple layered surfaces matching the curve of the fairing. Its half moon cut out design actually enhances the emblem details. Attaches with double sided tape for a secure fit.
TOURING ACCESSORIES
Enhance safety and visibility by bringing Amber and Chrome to the Vertical Air Intake. The 52-823 is an Amber Reflector set into a stylish contoured chrome accent to fit over the non functional Vertical Air Intake. The 52-824 goes one step further by incorporating a pair of 12 LED lights. This greatly enhances visibility and safety and can be wired as dual function running and turn signals for the ultimate improvement to visibility.
NEW Side Fairing Emblem Accents
CRUISER ACCESSORIES
NEW Vertical Air Reflector
WINDSHIELDS
52-824
54.95
AT V ACCESSORIES
89.95
FLAGS & FLAG POLE MOUNTS LICENSE PLATE ACCESSORIES
NEW Belly Pan for Honda GL1800
NEW Vertical Air Intake Accent
Fitment
Fitment
Part No. Unit MSRP
Honda GL1800 2001-2013
52-817
Pair
$
36.95
www.bigbikeparts.com
•
Each
$
49.95
E-mail us info@bigbikeparts.com
71
GENERAL ACCESSORIES
Part No. Unit MSRP
Honda GL1800 2012-2013 (not F6B) 52-826
LIGHTING
This Chrome ABS Accent dresses up the Vertical Air Intake on the 2012 and newer GL1800 Goldwings. This must have chrome accent attaches easily with double sided tape provided for a custom look.
Streamline and protect your undercarriage by adding a belly pan to your GL1800. While the primary goal of a belly pan is to protect softer undercarriage parts such as your coolant tank, there is added streamlining that provides a smoother air flow and contributes to less wind drag and buffeting at highway speeds. A custom engineered perforation pattern is incorporated to increase ventilation for better airflow. Made from aircraft quality aluminum and designed in 2 pieces to allow easier oil filter access. Edges are softened to minimize sharp edges. Made in the USA.
GL1800: COCKPIT
Touring Accessories 52-605A
Teardrop Master Cylinder Covers Add a little chrome to your Honda GL1800 with Show Chrome Accessories® Teardrop Master Cylinder covers. Aluminum die-cast cylinder cover in teardrop design is a perfect extra to the handle bar area. Dimension 3-1/4”L x 1-3/4”W x 1/2”H.
52-705MA
Fitment
Part No. Unit MSRP
Honda GL1800 2001-2013
53-747
Pair
$
49.95
LED Master Cylinder Switch Block LED switch block assemblies incorporate 3 rocker style switches with bright amber LED’s. Mount on the brake side of the bike and easily control auxiliary driving, fog, or marker lights on Cruisers or Gold Wings. The Switch Block Assembly fits the master cylinder for an integrated OEM look. Fits Honda GL1500/GL1800, VTX1300, VTX1800, VT600, VT750, VT1100, VT1300 Fury, Interstate, Stateline, Sabre, VF750, Valkyrie, Yamaha Royal Star & Road Star. Description
Part No.
Unit
Chrome (left/clutch)
52-605LA
Set
$
Chrome (right/brake)
52-605A
Set
$
Matte (left/clutch)
52-705LMA
Set
$
Matte (right/brake)
52-705MA
Set
$
52-605
1
Master Cylinder Top Covers
MSRP
Give your handlebar area a little chrome with Show Chrome Accessories® Master Cylinder Top Covers. Easy installation. Give your Honda GL1800 a custom look with class. Smooth top adds luster to your Master Cylinder. Dimension 3-1/4”L x 1-3/4”W x 1/2”H.
79.95 79.95 79.95 79.95
Master Cylinder Switch Block
Fitment
Part No. Unit MSRP
Honda GL1800 2001-2013
2-288
Pair
$
25.95
The Switch Block Assembly fits master cylinders and houses three switches for auxiliary controls of lighting. The assembly is available in chrome and a matte black finish. Shown with our Master Cylinder Top Cover (2-288).
1
Fits Honda GL1500/GL1800, VTX1300, VTX1800, VT600, VT750, VT1100, VT1300 Fury, Interstate, Stateline, Sabre, VF750, Valkyrie, Yamaha Royal Star & Road Star. 2
Description
Part No.
Chrome (right/brake)
52-605
Set
$
69.95
Matte (left/clutch)
52-705LM
Set
$
69.95
Replacement Switch at 12.5V For 52-605 & 52-705LM (Requires Soldering)
16-29
72
Each
$
4.95
Master Cylinder Covers
The Kill Switch chrome cover fits easily over the stock kill switch on the GL1800.A locator line is stamped into the design to provide instant visual identification of its position.
Show Chrome Accessories® Free Spirit Master Cylinder Covers are a great finishing touch to set off your handlebars. Constructed of Aluminum die-cast, these covers offer easy installation with a great chrome accent. Get one on your Honda GL1800 today. Dimension 3-1/4”L x 1-3/4”W x 1/2”H.
Fitment
Part No. Unit
Fitment
Part No. Unit MSRP
Honda GL1800 2001-2013
52-609
Honda GL1800 2001-2013
2-447
2
52-705LM
Unit MSRP
Chrome Kill Switch Cover
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Each
MSRP $
8.95
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
Pair
$
29.95
AUDIO
GL1800: COCKPIT
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS
Master Cylinder Coin Holder
Fitment
Part No. Unit MSRP
eplacement Plastic for Honda R GL1800
Each
952689C Each
$
Fitment
Part No.
Unit
MSRP
29.95
Honda GL1800 2001-2013 (Brake)
18-111
Each
$
29.95
4.95
Honda GL1800 2001-2013 (Clutch)
18-112
Each
$
29.95
Honda GL1800 2001-2013 (Brake & Clutch)
18-111BC
Kit
$
$
TOURING ACCESSORIES
52-707
59.95
52-712
CAN AM ACCESSORIES
Handlebar Dampeners
Fitment
Part No. Unit MSRP
See grips on page 12-13.
Honda GL1800 2001-2013
52-698
Description
Part No. Unit MSRP
A pair of CNC chrome dampeners to replace the OEM black ends. Honda GL1800/ST1300
52-707
Pair
$
Chrome dampeners with carbon fiber insert. Honda GL1800/ST1300
52-712
Pair
$
54.95
Handlebar Helmet Holder Set The chrome Handlebar Helmet Holder Set replaces the stock brake and clutch lever on all Gold Wings.
Fitment
Part No. Unit MSRP
Honda GL1800 2001-2013
52-627
Pair
$
2-354
Part No. Unit MSRP
Handlebar Helmet Holder
2-354
Pair
$
One Handlebar Helmet Holder & Padlock
53-113
Kit
$
Mini Brass Padlock Fits Helmet Holder Studs
4-236
Each
19.95
14.95 $
5.95
8.95
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
73
GENERAL ACCESSORIES
The chromed ABS Handlebar Plugs replace the OEM plugs or are a cost effective replacement should you lose the original plugs.
Description
LIGHTING
Handlebar Clamp Plugs
LICENSE PLATE ACCESSORIES
53-113
32.95
FLAGS & FLAG POLE MOUNTS
Aluminum Handlebar Riser Shims mount between the handlebars and the forks to raise the handlebars about 1-1/2” at the grip end.
AT V ACCESSORIES
Handlebar Riser Shims
Pair $34.95
CRUISER ACCESSORIES
Holder Honda GL1800 2001-2013 52-689
Smooth Blade Brake & Clutch Levers
WINDSHIELDS
Mounts on the master cylinder with longer screws provided. Slots to hold quarters, nickels and dimes. Includes clear plastic top cover to keep out the elements. Patent pending.
GL1800: COCKPIT
Touring Accessories Fairing Face Molding
52-789
The Fairing Face Molding set is chromed ABS which replaces the OEM color matched pieces. Easily snaps into place. Fitment
Part No. Unit MSRP
Honda GL1800 2001-2010
52-643
Pair
$
69.95
52-784
Front Speaker Trim
The Contour Series delivers stylish curves and a flare of elegance to enhance the classic style of the Honda GL1800 Gold Wing. These front speaker accents capture the Contour Series design while molding to the curves of the existing OEM speakers. Simple installation, brilliant chrome plated ABS, and seamless lines gives these speaker accents a step above the rest at a great value. Description
Part No.
Unit
MSRP
Honda GL1800 2001-2005 (Front)
52-784
Pair
$
39.95
Honda GL1800 2006-2013 (Front)
52-789
Pair
$
39.95
Rear Speaker Trim
52-790
The Contour Series delivers stylish curves and a flare of elegance to enhance the classic style of the Honda GL1800 Gold Wing. These rear speaker accents capture the Contour Series design while molding to the curves of the existing OEM speakers. Simple installation, brilliant chrome plated ABS and seamless lines gives these speaker accents a step above the rest at a great value.
52-785
Description
Part No.
Unit
MSRP
Honda GL1800 2001-2005 (Rear)
52-785
Pair
$
39.95
Honda GL1800 2006-2013 (Rear)
52-790
Pair
$
39.95
Chrome CB Controller Cover Specifically designed to accent the OEM CB controller contours and incorporates a high luster chrome for a superior fit and finish. Easily attaches with durable double sided tape.
74
Fitment
Part No. Unit MSRP
Most Honda GL1800 with CB 2001-2013
52-780
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Each
$
28.95
Instrument Accent The chromed ABS Instrument Accent piece mounts over the stock charcoal plastic gauge area. Attaches with double sided tape provided. Fitment
Part No. Unit MSRP
Honda GL1800 2001-2005
52-647
Each
$
34.95
Chrome LED Volt Meter Chrome LED Volt Meter features 10 LEDs in 5 different colors to show voltage draw. The meter measures in 1/2 volt stages from an 11 to 15 volt range. The meter unit measures 2-1/4” x 1” x 1/2” deep and attaches with double sided tape provided. Description
Part No. Unit MSRP
Chrome LED Volt Meter
13-303
Each
$
54.95
Digital 5 Function Volt Meter
Includes voltage monitoring from 11 to 16 volts with thermometer, ice alert, clock, stop watch, and lap counter. Includes hook and loop for mounting. Dimension 5-5/8”L x 1”H x 3/4”D. Fitment
Part No. Unit MSRP
Digital 5-Function Volt Meter
4-239
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
Each
$
32.95
PEGS, BOARDS & GRIPS
Wind Deflector-Upper This custom designed upper wind deflector incorporates its own movable vent panel that can direct wind into the rider pocket. These upper panels dramatically widen the air protection pocket by approximately 4” on each side. No drill installation. Part No.
Unit
Bright Red Honda GL1800 2001 - 2013
52-662U
Set
$
Clear Honda GL1800 2001 - 2013
52-668U
Set
$
Magenta Honda GL1800 2001 - 2013
52-667U
Set
$
Smoke Honda GL1800 2001 - 2013
52-665U
Set
$
Yellow Honda GL1800 2001 - 2013
52-660U
Set
$
Bright Red
Clear
MSRP
COVERS
Description
AUDIO
GL1800: COCKPIT
Smoke
139.95 139.95
LUGGAGE & BAGS
Magenta
139.95 139.95 139.95
Yellow
Wind Deflector-Lower Description
Part No.
Unit
Bright Red Honda GL1800 2001-2010
52-662L
Set
$
MSRP
Candy Red Honda GL1800 2001-2010
52-666L
Set
$
Magenta Honda GL1800 2001-2010
52-667L
Set
$
Yellow Honda GL1800 2001-2010
52-660L
Set
$
119.95 119.95 119.95 119.95
CAN AM ACCESSORIES
Yellow
NEW Wind Deflector-Lower
Set
MSRP 125.95
$
Lower Rain Deflector
52-725
Set
$
54.95
www.bigbikeparts.com
•
Fitment
Part No. Unit MSRP
Honda GL1800 2001 - 2013
52-715
Set
$
E-mail us info@bigbikeparts.com
64.95
75
GENERAL ACCESSORIES
Part No. Unit MSRP
Honda GL1800 2001-2010 (Not comfort package)
Smoke acrylic panels to close the gap between the cowl and the case guard. Installs to case guard and lower cowl with hardware provided. Dimension 15”L x 4”H.
LIGHTING
Lower Cowl Deflector
Smoke acrylic rain deflectors mount to the bottom case guard with acrylic clamps. Each panel has a notch cut-out to allow case guard clamps to be installed if desired. Dimension 8-1/2”L x 6-1/2”W. Fitment
LICENSE PLATE ACCESSORIES
Unit
52-865L
FLAGS & FLAG POLE MOUNTS
Part No.
Smoke Honda GL1800 2001 - 2012
AT V ACCESSORIES
Big Bike Parts® introduces the latest version of its Side Fairing Wind Deflectors for the GL1800 Goldwing. The mounting is 100% hidden to provide a clean custom look. No drilling holes in your fairing to ruin your ride. These new Lower Side Fairing Wind Deflectors work great in combination with Big Bike Parts®, 52-665U, Upper Side Fairing Wind Deflectors to truly provide a quiet riding envelope for driver and passenger. Yet both upper and lower systems easily pivot to channel in air for those hot days you need more air to cool off. The custom contoured panels maximize the function and appearance of this great new accessory. Fits 2001-12 GL1800 Goldwing. Description
TOURING ACCESSORIES
Magenta Magenta
CRUISER ACCESSORIES
This custom designed lower wind deflector is contoured to minimize the wind flow close to the rider, or can be easily pivoted to direct air in front of the rider. The deflector mounts with provided die-cast mounting brackets. No drilling is required.
Bright Red
WINDSHIELDS
Candy Red
GL1800: COCKPIT
Touring Accessories 52-783
52-760
52-696 & 52-709
1
2 1
Chrome Radio Panel Accent
This stamped steel accent is designed to fit around the radio panel buttons to dress up the console area. Fitment
Right Side Control Panel Accent This chromed stamped steel accent dresses up the right side control area. Attaches with double sided tape provided.
Part No. Unit
MSRP
Honda GL1800 2006-2010 (airbag model), All 2012-2013 models 52-783
Each
$
Honda GL1800 2001-2010 (non airbag model)
Each
$
2
52-696
32.95 49.95
Chrome Radio Knobs
A pair of chromed ABS Radio Knobs to replace the dull OEM black volume and mode controls. The replacement knobs reuse the OEM clips and easily snap into place for a secure fit.
52-686
Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2005 & 2006-2010 Premium/ Comfort Packages. Right Side Control Panel Accent
52-686
Each
$
GL1800 with Navigation System 2006 - 2013
52-760
Each
$
32.95
GL1800 Airbag model 52-782 Chrome Navi Panel Accent 2006-2010, All 2012 - 2013 models
Each
$
32.95
29.95
Left Side Control Panel Accent
Fitment
Part No. Unit MSRP
Honda GL1800 2001 - 2013
52-709
52-758
Pair
7.95
$
52-759
Chrome Key Accent
This chromed stamped steel accent dresses up the area around the left side controls. Attaches with double sided tape provided. Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2010 (non airbag model)
52-685
Each
$
Chrome Key Accents beautifully accent your GL1800 kÂey ignition panel with a touch of chrome. Chrome Key Accents replace OEM accents and feature a rubber scuff pad to resist scratching. Accents easily snap into place with self-locking tabs.
Fitment
Part No. Unit
MSRP
Honda GL1800 2001-2005 (not recommended for European Models)
52-758
Each
$
Honda GL1800 2006 - 2013 (not recommended for European Models)
52-759
Each
$
19.95 19.95
29.95
Chrome Fuel Door Accent Chromed Stamped Steel accent easily mounts with double sided tape to the fuel door. Fitment
The chromed ABS Air Vents replace the OEM black vents. The air vents are easy to adjust and easily snap into place.
Each $24.95 Each $24.95
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
52-642
Chrome Air Vents
Part No. Unit MSRP
Honda GL1800 2001- 52-629 2009 (non airbag model) Honda GL1800 2006- 52-781 2010 (airbag model), All2012-2013models
76
52-684
Fitment
Part No. Unit
Lower Air Vents Honda GL1800 2001-2010
52-642
Pair
$
52-684
Pair
$
Upper Air Vents Honda GL1800 2001-2005
•
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP 74.95 59.95
PEGS, BOARDS & GRIPS
Premium Double Add-APocket Pocket is hinged for easy access. Dimension 9-1/2”L x 6-3/4”W x 3”H. H18LP-2BK Each
Unit MSRP $
39.95
Honda GL1800 H18AP-2BK Each 2001-2010 (right)
$
39.95
Tank Pouch
MSRP
H18LPD-2BK Each
$
54.95
H18APD-2BK Each
$
54.95
Fitment
Part No.
Unit MSRP
Honda GL1800 2001 H18LPC-2BK Each $39.95 - 2013
Part No.
Unit
MSRP
Honda GL1800 2001 - 2013
H18TMBK
Each
$
H18TPVBK Each
Multi-function Tank Pouch incorporates zippered saddlebags attached to an easily removable bag holder that holds a map pouch and storage bag. Not recommended for airbag models. Dimension 27”L x 16-1/2”W x 3-1/2”H. Fitment
Part No.
Honda GL1800 2001-2010, 2012
H18DSVBK Each
Easy access to your wallet, garage door opener or sun glasses. Made of weather resistant material. The 9” x 4.5” x 2” Universal Dash Pouch will fit any motorcycle with an exposed dash. Fitment
Part No.
Unit MSRP
Honda GL1200, GL1500, GL1800, & ST1300
HDPBK
Each
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
$
25.95
77
GENERAL ACCESSORIES
MostGL1200,GL1500,& H18ARCBK Each $34.95 GL1800 armrests
MSRP 149.95
$
LIGHTING
Unit MSRP
Unit
Universal Dash Pouch
16.95
Mounts to passenger armrests. Fabric matches OEM seat. Dimension 7-1/4”L x 5”W x 2-1/4”H. Part No.
25.95
Saddlebag Tank Pouch
Passenger Armrests Pouch Fitment
$
LICENSE PLATE ACCESSORIES
Fitment
Honda GL1800 2001-2013
MSRP
FLAGS & FLAG POLE MOUNTS
Made of marine grade vinyl with nonmarring back and UV proof clear plastic. Securely mounts around the yoke with its own hook and loop enclosure, easy removable strap. Secures with hook and loop at top easily allows full unrestricted access to audio cluster. Not recommended for airbag models. Dimension 9-1/2”L x 9-1/2”W x 1/4”H.
Unit
AT V ACCESSORIES
Tank Map Pouch
Part No.
CAN AM ACCESSORIES
Designed with clear pouch (6” x 3” x 1”) to accommodate and provide access to various PDA, MP3 and other electronic devices. Dimension 9-1/2”L x 6-3/4”W x 3”H.
Fitment
TOURING ACCESSORIES
Premium Double Add-A-Pocket
CRUISER ACCESSORIES
Honda GL1800 2001 - 2013 (left) Honda GL1800 2001 - 2013 (right)
Unit
WINDSHIELDS
The Tank Pouch slips on the gas tank access door adding extra storage without the bulk of a larger tank bag. The pouch is secured with hook and loop closures and the nonmarring back prevents scratches to the access door. Dimension 6-3/4”L x 6-3/4”W x 2-1/2”H.
Roomy main zippered compartment with a handy utility pouch on top. An additional drop down pocket makes this piece a storage must have. Dimension 14”L x 6-1/2”W x 3-1/2”H. Part No.
LUGGAGE & BAGS
Part No.
Honda GL1800 2001-2010 (left)
COVERS
Fitment
Double Custom Fairing Pocket Covers Deluxe Fitment
AUDIO
GL1800: COCKPIT
GL1800: COCKPIT
Touring Accessories NEw Image here of 52-672
Adjustable
NEW Passenger Armrests
Smart Mount Backrest TM
The Smart MountTM backrest attaches through the OEM seat and only the backrest pad perches through the driver seat. This eliminates all side mounting brackets and backrest hoop making a very clean look. This backrest utilizes Big Bike Parts copyrighted backrest pad hinge and adjustable tongue, allowing the backrest pad to mount up or down with 1” of adjustment, as well as pivoting, allowing you to stretch while riding. Comes with all required hardware and includes storage pouch. Made in the USA. Fitment
Part No.
Honda GL1800 2001-2013 (not F6B)
52-797
Unit Kit
This Deluxe Armrest System for the GL1800 Goldwing is the ultimate in styling and comfort. The billet forged aluminum brackets are CNC finished and mount to the trunk. The socketed attachment of the swing arm does not interfere with the trunk opening and swings fully out of the way for passenger access. Uses the antennas to help mount to the trunk and an optional CB mount, BBP # 52-679, is available if no CB antenna is on board. Fitment
Part No.
Honda GL1800 2001-2013 (not F6B)
Unit Kit
52-672
MSRP $
289.95
MSRP 199.95
$
Passenger Armrests Adjustable
Armrest/Backrest Combo
Armrest/Backrest Combo incorporates a smaller contoured driver backrest using materials and designs to match the OEM look. A new design innovation is the sleek single mounting bracket which allows for easier installation of both the backrest and the armrests. Fitment
Part No.
Honda GL1800 2001-2013 (not F6B)
52-771
Unit Kit
MSRP $
329.95
The Passenger Armrests fabric matches the OEM seat. The armrests conveniently swing out of the way for easy passenger access. Bolts to passenger handles on each side mounting to the frame for a solid mount. Trunk and Saddlebag can be accessed without removing armrests out. Armrest pads have a 2-1/2” thick soft foam pad for comfort. Dimension 7”L x 4-1/2”W. Also see page 115 for the Beverage Butler. Fitment
Part No.
Unit
Honda GL1800 2001-2013 (not F6B)
52-677A
Kit
Replacement Armrest Nylon Washer
W1160701N 10pk
Driver Backrest
Part No.
Honda GL1800 2001-2013 (not 52-637 F6B) ReplacementNylonCompression P1161ON Replacement Coupler Nut
78
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Kit $199.95 1.95
$
900371BC Each $14.95
$
3.95
Custom contoured Seat Tie Down Brackets are the ideal way to attach bungee hooks to your Goldwing seat. The tie down brackets are shaped for easy use and mount behind the left and right seat handles. Has a black powder coat finish.
Unit MSRP
Each
229.95
Seat Tie Down Brackets
This Driver Backrest incorporates our popular hoop and slide tube brackets for secure and compact fit. The specifically contoured backrest fits and coordinates with the OEM seats and has a passenger storage pouch. Adjustable backrest. Fitment
MSRP $
Fitment
Part No.
Honda GL1800 2001-2013 (not F6B) 52-802
Unit Set of 4
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP 14.95
$
AUDIO
GL1800: COCKPIT
PEGS, BOARDS & GRIPS COVERS
SPF520
Passenger Floorboard Risers
21-520
Part No. Unit MSRP
Driver Peg Lowering & Mounting Bracket, Honda GL1800 2001-2010, 2012
SPF520
Driver Peg Lowering Bracket Only, Honda GL1800
21-520
Pair
Driver Peg Mount Bracket Only, Honda GL1800 2001-2013
52-659
Pair
Kit
159.95
$
$
69.95
119.95
Unit Set
99.95
$
Passenger Floorboard Bottom Light These chromed ABS trimmed amber lights attach to the bottom of the passenger board with provided screws. Mounts to OEM boards or Show Chrome Accessories® Chrome Passenger Floorboard Covers (52-626). Fitment
Part No.
Unit
Honda GL1800 2001-2013 (not F6B)
52-619
Pair
MSRP
Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2013 (not F6B)
52-626
Pair
$
119.95
$
MSRP 99.95
$
These chromed ABS Covers mount to the bottom of passenger floorboards to replace the OEM gray plastic. Mounts with existing hardware. 45.95
Cruis Wing Kickstand
TM
The Heel-Toe Shifter Kit increases the ability to shift comfortably. The kit features reinforced nylon bushings for longer life and works with Show Chrome Accessories® pegs and most aftermarket pegs, but does not work with full length floorboards. Fitment
Part No.
Unit
Honda GL1800 2001-2013
52-726
Set
MSRP 115.95
$
Part No. Unit MSRP
GENERAL ACCESSORIES
Fitment
LIGHTING
The Cruis Wing™ Kickstand design has a larger base promising more stability in the rest position. 7-1/4”L.
Honda 52-548A Each $105.95 GL1800 2001-2013
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
LICENSE PLATE ACCESSORIES
Heel-Toe Shifter Kit
Passenger Floorboard Cover
FLAGS & FLAG POLE MOUNTS
Part No. 52-711
Set
AT V ACCESSORIES
Chromed die-cast heel rest with knurled surface.
Honda GL1800 2001-2013
52-693
$
Brake Side Heel Rest
Fitment
Honda GL1800 2001-2013 (not F6B)
MSRP
CAN AM ACCESSORIES
Fitment
Unit
TOURING ACCESSORIES
The Driver Peg Lowering Kit comes with chrome plated driver peg mount brackets and driver peg lowering brackets. Installation of this kit moves the driver peg forward and down for more leg room. The lowering brackets have two different positions for adjustment. Installing Show Chrome Accessories® 52-726 Heel-Toe Shifter Kit with these kits increase shifting comfort. (Left mounting bracket not shown). Drops approximately 2-1/2” down and 2” forward.
Part No.
CRUISER ACCESSORIES
CNC Driver Peg Lowering Kit
Fitment
WINDSHIELDS
Steel plates mount into the stock holes enabling the OEM passenger floorboards to be relocated into one of 10 positions easily without removal of bolts. Allows boards to be raised 3-5/8” higher and positioned 1-1/2” further forward compared to the OEM position.
LUGGAGE & BAGS
52-659
79
GL1800: COCKPIT
Touring Accessories
2
2 1
1
NEW Chrome Engine Side Cover with Rubber Inserts
NEW Chrome Engine Side Cover 1
1
These Engine Side Covers replace the OEM flat black pair and include the same high quality heat resistant foam to help isolate engine noise and heat. These Engine Side Cover with Rubber Scuff Pads complement Show Chrome Accessories® Frame Covers with Rubber inserts, BBP# 52-724. Fitment
Part No.
Unit
Honda GL1800 2012-2013
52-809
Pair
MSRP 179.95
$
These Chrome Engine Side Covers replace the OEM flat black covers on the 2012-2013 Goldwing. They come as a pair with heat resistant padded foam backing just like the OEM pieces, but in our durable Show Chrome Accessories® chrome finish and can be pairs with BBP #52-714. Fitment
Part No.
Unit
Honda GL1800 2012-2013
52-799
Pair
2
MSRP 159.95
$
Chrome Frame Covers
2
Chrome Frame Covers With Rubber Inserts
These Chrome Frame Covers replace the gray plastic OEM covers. Mounts with existing hardware.
An alternative to the all chrome look. This piece combines chrome and raised rubber inserts to replace the gray plastic OEM swing arm cover and all the way up the frame. Attaches with existing hardware.
Fitment
Part No.
Unit
Honda GL1800 2001-2013
52-714
Pair
Fitment
Part No.
Unit
Honda GL1800 2001-2013
52-724
Pair
Replacement Rubber Inserts
952724R
MSRP 125.95
$
MSRP 139.95
$
7.95
Set (5pc.)
$
Chrome & Rubber Swing Arm Covers
Passenger Floorboard Side Covers The Side Covers replace the OEM gray trim pieces along the side of the passenger floorboards of Honda GL1800.
These Chrome & Rubber Swing Arm Covers provide the proper scuff protection between the rider’s boot and frame. The cover replaces the OEM gray plastic. Mounts with existing hardware. Fitment
Part No. Unit MSRP
Fitment
Part No.
Unit
MSRP
Rubber Inserts Honda GL1800 2001-2013
52-640
Honda GL1800 2001-2013
52-613
Pair
$
80
Pair
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
$
69.95
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
59.95
AUDIO
GL1800: COCKPIT
PEGS, BOARDS & GRIPS COVERS
1
2
LUGGAGE & BAGS WINDSHIELDS
NEW Battery Side Covers NEW LED Saddlebag Scuff Accents 2
Part No.
Unit
Honda GL1800 2012-2013
52-822
Pair
MSRP 139.95
$
Fitment
Part No.
Unit
Honda GL1800 2012-2013
52-816
Pair
MSRP $
259.95
CAN AM ACCESSORIES
Fitment
This pair of chrome LED Saddlebag Scuff Accents, cover the black OEM side saddlebag panels and increase safety by incorporating SMD LEDs. These accents incorporate 56 high visibility LEDs, 28 per side, to let you be seen better in all conditions. This heightened design also incorporates a rubber scuff pad to keep passenger scuffs where they belong. The design of the LED Saddlebag Scuff Accent flows into Big Bike Parts® pair of Battery Side Covers (BBP # 52-822) that has its own matching rubber scuff pads and forward flowing design. For Honda GL1800 2012 and 2013 models.
TOURING ACCESSORIES
Big Bike Parts® has completely redesigned the Battery Side Covers for the 2012-13 GL1800 Goldwings, giving them style and the look of speed lacking on the OEM covers. These ABS chrome battery side covers incorporate a rubber scuff pad as well as an exciting new vent that better compliments the lines of the Goldwing. The rubber scuff pad flows into an adjoining scuff pad when used in combination with BBP # 52-816 LED Saddlebag Scuff Accent. These Battery Side Covers are sold as a pair and fit the GL1800 Goldwing 2012- 2013.
CRUISER ACCESSORIES
1
AT V ACCESSORIES FLAGS & FLAG POLE MOUNTS LICENSE PLATE ACCESSORIES
Battery Side Cover Trim The chromed ABS Battery Side Cover Trim replaces the OEM black plastic trim on Honda GL1800. Mounts with existing hardware. Fitment
Part No.
Unit
MSRP
Fitment
Part No.
Unit
Honda GL1800 2001-2010
52-630
Pair
$
Honda GL1800 2001-2010
52-723
Pair
Replacement rubber for 52-723 (2 pcs)
952723R
Pair
MSRP
79.95
110.95
$
$
5.95 www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
81
GENERAL ACCESSORIES
The chromed ABS Battery Side Cover Trim with contrasting raised black rubber inserts coordinate beautifully with our Chrome Frame Covers with Rubber Inserts (52-724). Mounts with existing hardware.
LIGHTING
Battery Side Cover Trim With Rubber Inserts
GL1800: COCKPIT
Touring Accessories
Chrome Saddlebag Scuff Pads
Chrome Rear Lower Cowl
Stamped Steel Chrome Rear Lower Cowl replaces the standard painted cowl with a clean aerodynamic chrome appearance under the Honda GL1800 Gold Wing. Installs easily with kits for both models with and without lower toe vents.
Protects saddlebags from passenger footwear while providing a unique and stylish look. Chrome plated steel scuff plates come as a 4 piece set and attaches with double sided tape provided.
Fitment
Part No.
Unit
MSRP
Fitment
Part No.
Honda GL1800 2001-2005 & 2006-2010 Premium Audio Version Only
52-614
Pair
$
329.95
Honda GL1800 2001-2010
52-761
Honda GL1800 2006-2010 with toe warmer vents, 2012 - 2013 HP Models
52-762
Pair
$
Unit Set(4pc.)
MSRP $
89.95
549.95
Saddlebag Scuff Pads
Saddlebag Scuff Pads will protect saddlebags from passenger footwear with a soft carbon fiber look. The inner piece measures 10” L x 2-1/2” W and the outer piece measures 9-1/2” L x 1-1/4” W. The pads come as a set of 4 pieces and attach with double sided tape provided. Fitment
Part No. Unit
MSRP
Honda GL1800 2001-2010
52-742
$
Set
Engine Cover Scuff Pads These Engine Cover Scuff Pads easily adds a unique element to the Honda GL1800 with our popular carbon fiber look. The pads measure 8-1/2” L x 3-1/4” W to help shield the bike’s finish from scratches and scuffs. Attaches with double sided tape provided.
49.95
Helmet Hanger Scuff Pads
82
Fitment
Part No. Unit
MSRP
Honda GL1800 2001-2010
52-746
$
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Part No.
Unit
MSRP
Honda GL1800 2001-2010
52-740
Pair
$
Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2013
52-720
Pair
$
29.95
Tank Scuff Pads
These unique pads help protect saddlebags from helmet scratches with popular soft carbon fiber look. The pads measure 6-1/2” L and 3-1/2” W at the top to 1-1/2” W at the bottom. Attaches with double sided tape provided.
Pair
Fitment
29.95
For an all around soft carbon fiber look, add scuff pads to your engine cover and Tank Scuff Pads to the bike’s tank or other areas of the Honda GL1800, GL1500, Sport bikes etc. The tank scuff pads measures 12-3/4” L x 4-3/4” H. Attaches with double sided tape provided.
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
34.95
AUDIO
GL1800: REAR
PEGS, BOARDS & GRIPS COVERS
Trike Fender Rack Built with high luster chrome plated steel tube. The Trike Fender Racks will fit most aftermarket trike bodies and are easily installed with the supplied hardware. Rack size: 12” L x 6-1/4” W. Part No.
Unit
Trike Fender Rack
41-130
Pair
MSRP 149.95
$
Unit MSRP
Honda GL1800 Trunk Pouch 2001-2013 H50-103BK Each (not F6B)
$
This unique design incorporates a compound curve to match the Honda GL1800’s trunk shape. The Low Profile Contour Trunk Rack also incorporates high luster chrome and non-slip rubber inserts in a load bearing rack for luggage. Manufactured with superior quality components featuring CNC finished aluminum, ensures years of reliable use and low maintenance. Dimension 23”L x 12”W x 4-3/4”H. Fitment
Part No.
Unit
Honda GL1800 Gold Wing 2001-2013 (not F6B)
52-803
Each
MSRP $
249.95
29.95
Trunk Cargo Net
Fitment
Part No.
Unit
Honda GL1800 2001-2013 (not F6B)
H50-105BK Each
MSRP 9.95
This large Luggage Rack is for the Honda GL1800 Gold Wing. The manufacturer’s trunk specs should be referenced for loading limit. Dimension 24”L x 13”W x 7-1/2”H.
AT V ACCESSORIES
Add extra trunk storage with this handy corded elastic net. Easily attaches into available screw holes in the front or the back of the trunk.
CAN AM ACCESSORIES
Deluxe Luggage Rack
$
Fitment
Part No.
Unit
Honda GL1800 2001-2013 (not F6B)
52-610
Each
MSRP
FLAGS & FLAG POLE MOUNTS
Trunk CubbyHold
119.95
$
TM
TM
Part No.
Unit
MSRP
Honda GL1800 2001-2013 (not F6B)
52-690A
Pair
$
Star Washers Part No. 4-231
Unit 10 Pack
MSRP 19.95
$
Fitment
Part No.
Unit
Honda GL1800 2001-2013 (not F6B)
52-703
Each
www.bigbikeparts.com
•
MSRP $
349.95
E-mail us info@bigbikeparts.com
83
GENERAL ACCESSORIES
1/4” hole, 1-1/4” O.D.
25.95
The chrome plated CNC Billet Aluminum Luggage Rack, in the Medallion Series™ design, comes with black rubber center inlay. The rack measures 23-1/2” W x 14” D and attaches securely with a four point mounting system to the trunk lid with hardware provided, drilling is required. Works with Honda line spoiler. The manufacturer’s trunk specs should be referenced for loading limit.
LIGHTING
Fitment
LICENSE PLATE ACCESSORIES
Medallion Series Billet Aluminum Luggage Rack
These clear Trunk CubbyHoldTM install to the side mounting lugs in the trunk with longer screws provided. Will not interfere with trunk bags or helmet storage.
TOURING ACCESSORIES
Part No.
Contour Trunk Rack
CRUISER ACCESSORIES
The Triple Trunk Pouch provides added storage in the trunk, with a large 12” x 6” main compartment and two roomy 5” x 6” side compartments. All of the compartments have hook and loop closures to keep contents secure during travel.
WINDSHIELDS
Triple Trunk Pouch
Fitment
LUGGAGE & BAGS
Description
GL1800: REAR
Touring Accessories
4 4
LED Trunk Lights
LED Trunk Lights Clear Lens. Fitment
Part No.
Unit
Honda GL1800 2001-2013 (not F6B)
52-786
Pair
Fitment
Part No.
Unit
Honda GL1800 2006-2010
52-788
Pair
MSRP $
239.95
1
LED Saddlebag Tail Lights 5
5
Clear LED Saddlebag Lights illuminate brighter and last longer than conventional lights. The lights plug directly into the OEM wire harness and mounts easily. Requires a load equalizer 13-304A see page 113.
2
MSRP $
269.95
3
LED Martini Trunk Light Set 1
Constructed of lightweight ABS and coated with a shiny chrome finish. Installation is easy with the Plug ‘n’ Go wiring. These LED Martini Lights are continuously on creating safety lighting during the day and extra lighting at night. 80 Red LED’s Dual function running/brake. Fitment
Part No.
Unit
Honda GL1800 Gold Wing 2001-2010
52-791
Set
2
MSRP $
259.95
LED Martini Saddlebag Light Set
Constructed of lightweight ABS and coated with a shiny chrome finish. Installation is easy with the “Plug ‘n’ Go” wiring. These LED Martini Lights are continuously on creating safety lighting during the day and extra lighting at night. 70 Red LED’s Dual function running/brake. Fitment
Part No.
Honda GL1800 Gold Wing 2001-2010 (Sides & Corners)
52-792
Set (4pcs.)
$
Honda GL1800 Gold Wing & Trikes (Corners)
52-793
Pair (2pcs.)
$
3
Unit
MSRP
279.95 169.95
LED Martini Lower Air Dam
The Lower Air Dam Martini Lights are constructed of lightweight ABS and coated with a long lasting chrome finish. The set includes 30 brilliant LED’s and are a great added accessory to any Honda GL1800. Fitment
Part No.
Unit
Honda GL1800 Gold Wing 2001-2010
52-769
Set
84
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Incandescent Trunk Lights Incandescent Trunk Lights are designed to retro fit the 2001-2005 to match 2006 OEM Saddlebag lights. The lights reuse OEM clear bulbs, have a red lens and are designed as a direct bolt in replacement. Fitment
Part No.
Unit
Honda GL1800 2001-2013 (not F6B)
52-776
Pair
Incandescent Saddlebag Lights These incandescent Replacement Saddlebag Lights bring the 2006 and newer look and style to the 2001-2005 Gold Wing. Includes 2 Amber, 2 Clear 10-7443 Bulbs.
MSRP
Fitment
Part No.
Unit
169.95
Honda GL1800 2001-2005
52-777
Pair
$
MSRP 139.95
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP 189.95
$
AUDIO
GL1800: REAR
PEGS, BOARDS & GRIPS
Lower Saddlebag Air Dam Spoiler This chromed ABS four piece set replaces the lower air dams that come standard on all Honda GL1800 Gold Wings. Mounts with existing hardware. Part No.
Unit
Honda GL1800 2001-2010
52-646
Set
MSRP 129.95
Made of chromed ABS, the Trunk Grilles add a unique accent to the Honda GL1800 upper tail lights. Attaches with double sided tape provided. Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2013 (not F6B)
52-744
Pair
$
49.95
$
LUGGAGE & BAGS
Fitment
COVERS
Trunk Grilles
WINDSHIELDS
Made of chromed ABS, the Saddlebag Grilles add a sleek look to the lower tail lights of the Honda GL1800. Attaches with double sided tape provided. Part No.
Unit
MSRP
Honda GL1800 2001-2005
52-745
Pair
$
49.95
Fitment
Part No.
Trunk Molding Insert Honda GL1800 2001-2010
52-611
Set (3pc.)
Unit
$
Saddlebag Molding Inserts Honda GL1800 2001-2010
52-612
Set (4pc.)
$
CAN AM ACCESSORIES
These chromed ABS molding inserts replace the dull OEM inserts. The inserts use the existing OEM screws for easy installation. MSRP 49.95
65.95
Trunk Lens Grilles Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2013 (not F6B)
52-779
Pair
$
Fitment
Part No.
Unit
MSRP
Honda GL1800 2006-2010 BBP Lights 52-777, 52-778, 52-787, & 52-788
52-775
Pair
$
49.95
FLAGS & FLAG POLE MOUNTS
Saddlebag Lens Grilles
49.95
Trunk Lens Grilles
Fitment
Part No. Unit
LED Trunk Molding Light Set Honda GL1800 2001-2010
52-701A
Set
$
149.95
Fitment
Part No.
Unit
MSRP
LED Saddlebag Molding Light Set Honda GL1800 2001-2010
52-702A
Set
$
159.95
Honda GL1800 2006-2010
52-774
Pair
$
LIGHTING
Increasing flexibility of choice, Big Bike Parts® has combined two top selling parts into one; LED Trunk Molding Set and LED Saddlebag Molding Set now come with both Red and Clear lenses. Both lens colors are included, allowing you to pick which one you prefer. Both sets have 56 LEDs increasing your visibility and safety. Big Bike Parts® Plug N’ Go installation is easy and fits 2001- 2010 GL1800 Goldwings.
•
E-mail us info@bigbikeparts.com
49.95
85
GENERAL ACCESSORIES
Fits OEM Honda GL1800 2006 & up. Attaches with double sided tape provided.
www.bigbikeparts.com
LICENSE PLATE ACCESSORIES
Attaches with double sided tape provided.
MSRP
AT V ACCESSORIES
Trunk Grilles are designed to match 2006 and newer Trunk lights, see BBP#52-776 & 52-786. Attaches with double sided tape provided.
NEW LED Trunk & Saddlebag Molding Light Set
TOURING ACCESSORIES
Chrome Trunk & Saddlebag Molding Inserts
Fitment
CRUISER ACCESSORIES
Saddlebag Grilles
GL1800: REAR
Touring Accessories Medallion Series Key Plate Accents TM
The chromed ABS Key Plate Accents are designed to fit around the Honda GL1800 trunk key hole. Attaches with double sided tape provided. Available in chrome edge with a black insert and chrome edge with a gold insert. Dimension 5-1/2”L x 2-1/2”W x 1/2”H. Fitment
Part No. Unit
Chrome Edge with Black Insert 52-658 2001-2013 (not F6B) Chrome Edge with Gold Insert 2001-2013 52-670 (not F6B)
Trunk Key Accent
MSRP
Each
$
Each
$
16.95
25.95
Trunk Key Accent for the Goldwing trunk. This Key Accent has a layered look to it, complementing the sharp lines of the new saddlebags. Made from Show Chrome Accessories durable ABS and chrome finish. This Key Accent completes the trunk look and easily mounts with 3M double sided tape provided. Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2013 (not F6B)
52-794
Each
$
19.95
Trunk Lift Handle This chrome plated handle allows for easy lid opening. Dimension 8”L x 3-1/2”W x 1-3/8”H. Fitment
Part No.
Honda GL1800 2001-2013 (not F6B) 2-376
Unit
MSRP
Each
$
25.95
Medallion SeriesTM Trunk Handle The Trunk Handle in the Medallion Series™ design, is made from die-cast chrome plated. The handle mounts with four screws provided. Drilling is required. Dimension 13-1/2”L x 1-1/2”W x 2-3/4”H. Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2013 (not F6B)
52-653
Each
$
99.95
Cruis Wing Helmet Lock Extensions TM
Helmet Lock Extensions
These extensions allow for the securing of the helmet through its strap ring onto the bikes locking device. Its 1-3/8” wide design can accommodate the oversized “D” and “H” rings found on today’s helmets.
Pair of chrome plated lock extenders make helmet locking easier by going through the helmet “D” ring and letting the helmet hang freely. Dimension 3-1/2” L. Description
Part No.
Unit
MSRP
Helmet Lock Extensions
2-416
Pair
$
86
Fitment
12.95
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Part No.
Honda GL1800 2001-2013 (not F6B) 52-645
•
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
Unit
MSRP
Pair
$
25.95
AUDIO
GL1800: REAR
PEGS, BOARDS & GRIPS COVERS
Rear Fender Trim LUGGAGE & BAGS
The Fender Trim wraps around the rear fender tip for a nice chrome touch. The trim is approximately 1” high and attaches with double sided tape provided. Part No.
Unit
MSRP
Honda GL1800 2001-2010
52-695
Each
$
1 WINDSHIELDS
Fitment
24.95
CRUISER ACCESSORIES
3
Chrome Exhaust Tips
1
Part No.
Unit
Honda GL1800 2001-2013
52-618
Pair
MSRP 139.95
Fitment
$
Part No. 52-821
Honda GL1800 2012-2013 2 2 3
TM
99.95
$
NEW LED Rear Fender Tip
Another Contoured™ chrome must have LED light for your GL1800 Goldwing. This ABS Chrome Accent with LEDs mounts to the lower rear fender with both double sided adhesive tape and 2 button head screws to replace OEM ones. This Contoured™ chrome LED incorporates 20 SMD LEDs configured as a dual function for both running and brake use. Custom designed beveled lens minimize hot spots where the LEDs are displayed, resulting in a more uniform pattern. Part No.
Unit
Honda GL1800 2012-2013
52-819
Each
U.S. Design Patent #D442,121.
Big Bike Parts® introduces its all new GL1800 Goldwing exhaust tip extensions with a scalloped style design. These die cast extensions easily replace the OEM exhaust tips with the same 3 bolt pattern. The 4-1/2” diameter extension is capped with a blind mount die cast trim, adding a true custom look to your Goldwing.
Fitment
3
MSRP 109.95
$
NEW Die Cast Exhaust Tips
Part No.
Unit
MSRP
1 220 Accent Grille (8-3/4” long)
52-532
Pair
$
29.95
2 400 Accent Grille (15-7/8” long)
52-534
Pair
$
39.95
Fitment
Part No.
Unit
3 500 Accent Grille (19-3/4” long)
52-535
Pair
$
44.95
Honda GL1800 2001-2013
52-798
Pair
www.bigbikeparts.com
•
MSRP $
249.95
E-mail us info@bigbikeparts.com
87
GENERAL ACCESSORIES
Fitment
LIGHTING
Decorative tapered chrome steel accent strips give the feel of winged flight. Available in seven lengths to be used as fairing, fender or side cover accents on both touring and cruiser motorcycles, trikes and trailers. Attaches with double sided tape provided.
LICENSE PLATE ACCESSORIES
Cruis Wing Accents
MSRP
FLAGS & FLAG POLE MOUNTS
1
Unit 3 pc set
AT V ACCESSORIES
Fitment
NEW Taillight Lens Accents
The answer to transforming your GL1800 Taillight Bar into a thing of beauty is Big Bike Parts® all new 3 piece Taillight Bar Lens Accents. These ABS Contoured™ chrome designs, continue the coordinated design theme of accents from front fender to rear taillight, providing a true work of art. Each piece is finished in our trademark Show Chrome Accessories® chrome finish and easily attaches with double sided adhesive, which is included.
CAN AM ACCESSORIES
These single Exhaust Tips are 9-3/4” L x 5” diameter to replace the OEM. These exhaust tips provide more turndown than others, helping to keep the exhaust fumes low and underneath any trailer being pulled. Extra length extends tips approximately 3-1/2” past bottom of the saddlebags.
TOURING ACCESSORIES
2
GL1800: REAR
Touring Accessories
Receiver Hitch
52-814
This new hitch assembly incorporates a vertical receiver and mounts to the frame, making this new vertical hitch essentially invisible when the receiver mount is removed. It includes the same features Big Bike Parts hitches are known for: strong cross tie to the saddlebag sub structure, large chain loops on the receiver, chrome 1-7/8” ball and anti-chatter bolt to minimize trailer sway. Comes with all hardware and instructions. Fits 2001-2012 Honda Goldwing. Fitment
Part No.
Honda GL1800 Goldwing 2001-2012
52-825
52-694
Unit Kit
MSRP $
Electronically Isolated Trailer Wire Harness
269.95
This trailer wire harness isolates the load between the motorcycle and trailer through four 10 amp relays to prevent electrical feedback. The heavy duty circuit board can handle a continuous 16 amp steady load and further isolation is provided with a separate 15 amp inline fuse for additional protection. Plugs into existing wire harness, no splicing required. Works with 5 pin trailer connector (not included).
Receiver Hitch
Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2010
52-694
Each
$
NEW Honda GL1800 2012-2013
52-814
Each
54.95
$54.95
Black powder coat, two piece assembly boasts a quick installation over others of its type on the market. Four point installation goes on quickly, mounting to the saddlebag crash guards and rear sub-frame of the motorcycle. Utilizes conventional 1-1/4” tube mount so coolers and other hitch attachments will continue to work. Complete kit includes receiver, ball, ball mount, and mounting tabs for mud flaps. Ball size 1-7/8”.
Trailer Dead Bolt
4-229
88
Fitment
Part No.
Unit
Honda GL1800 2001-2010
52-625A
Kit
Chrome Receiver Tube Mount
900437M
Each
$
Chrome Plated Steel Ball Cover
4-229
Each
$
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
MSRP $
269.95
Made in the USA. This 1 ⁄ 2” Dead Bolt Hitch Lock provides extra security for trailers. Comes with its own set of keys for quick unlocking.
39.95
Fitment
12.95
1/2” Dead Bolt Hitch Lock
Part No.
Unit
MSRP
4-222
Each
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
19.95
PEGS, BOARDS & GRIPS
Lighted Vanity Mirror
Unit
MSRP
Honda GL1800 2001-2010 (clear lens)
10-528
Each
$
89.95
Unit
MSRP
52-603
Each
$
Replacement Bulbs
10-2603
Pair
Fitment
Part No.
Unit
Honda GL1800 2001-2013 (not F6B)
52-603WI
Kit
84.95 $
3.95
Inner Trunk Light Harness
CRUISER ACCESSORIES
Part No.
Part No.
Honda GL1800 2001-2013 (not F6B)
MSRP 32.95
This Conversion Harness converts your trunk lights into running/ turn/brake lights for added safety. The conversion harness will not effect OEM turn signals. Part No.
Unit
MSRP
Honda GL1800 2001-2010
52-766
Each
$
49.95
Plugs in easily to on-bike accessory harness allowing easy use of GPS Units, Radar Detector, Cell Phone Charges, etc. Drilling required for installation. Plugs into existing wire harness, no splicing required.
Fitment
Part No.
Unit
MSRP
Honda GL1800 2001-2010
52-734
Each
$
16.95
Saddlebag Light Harness
Fitment
Part No. Unit MSRP
Honda GL1800 2001-2013 (Socket Only)
52-748
$
Set
$
Replacement Element for Cigarette Lighter 12V For BBP 52-768, 52-768A Each 52-748 etc
10.95 15.95
$
6.95
Fitment
Part No.
Honda 2001-2005
52-680WI Set (4pc.)
www.bigbikeparts.com
•
Unit
E-mail us info@bigbikeparts.com
MSRP $
29.95
89
GENERAL ACCESSORIES
Cigarette Lighter Kit Plug-N-Go for the GL1800 (includes element) 52-768
Each
LIGHTING
Works with 52-776 and 52-777.
LICENSE PLATE ACCESSORIES
Accessory Socket
The light converter allows the Honda spoiler light to function as a running and brake light. Plugs into existing wire harness, no splicing required.
FLAGS & FLAG POLE MOUNTS
Fitment
AT V ACCESSORIES
Dual Function Converter
CAN AM ACCESSORIES
$
TOURING ACCESSORIES
Wiring harness is required when using the Show Chrome Accessories® Lighted Vanity Mirror (52-603). This wire harness is exact OEM replacement and can be substituted with Honda’s own vanity mirror and inner trunk light.
Trunk Turn Signal Conversion Harness
WINDSHIELDS
Fitment
Fitment
LUGGAGE & BAGS
The LED Spoiler Light is a dual functioning light that works as both a running and brake light. There are 24 LEDs for optimal brightness and visibility from behind. Plugs into existing wire harness, no splicing required. Mounts with existing hardware. Dimension 13”L x 2-1/4”W x 1-1/8”H.
COVERS
The Lighted Vanity Mirror mounts, with screws provided to the inside of the trunk surface to the existing trunk lid bosses. Additional wire harness required; Inner Trunk Light Harness (52-603WI). Dimension 8-3/4”L x 4-1/2”H x 1”W.
LED Spoiler Light
AUDIO
GL1800: REAR
GL1800: REAR
Touring Accessories NEW Dual USB Auxiliary
Replacement Grommets The five piece Replacement Grommet set, matches the OEM. The set includes: two ovals, two rounds and one slotted. Fitment
Part No.
Unit
Honda GL1800 2001-2013
52-691
5 pk.
MSRP $
This Dual USB Auxiliary Accessory Element is designed to plug into a 12 volt cigarette lighter socket and allow charging of electronic devices via USB connections. This Auxiliary Cigarette Element has 2 - USB plugs, providing a 2.1 Amps power supply with an LED indicator when properly Fitment connected. Compatible with iPods, iPhones, MP3, Honda GL1800 GPS, and other devices.
Part No. Unit MSRP 13-309
Each
14.95
$
4.95
NEW 2 - Port USB Auxiliary Socket This 2-port USB Auxiliary Socket, allows charging of USB electronic devices. This Auxiliary Socket has 2 - 2.1 amp USB power plugs for use in charging MP3, GPS, iPhones and other devices. Wire harness is Plug ‘N Go on GL1800 2001-2013 or there Fitment is a universal splice connection to wire into any 12 volt system. Honda GL1800
Plastic Rivets Re-usable Plastic Rivets for replacement of OEM rivets used on inside of fairings. Fitment
Part No.
Unit
Honda GL1800 2001-2013
3-104
10 pk.
MSRP $
6.95
Flush Re-usable Rivets These Re-usable Flush Plastic Rivets fit 6mm holes on the Honda GL1800 for use on front fairing pockets & etc. Head size is 12mm diameter with a stem length of 8mm. Fitment
Part No.
Unit
Honda GL1800 2001-2013
3-112
10 pk.
MSRP 10.95
$
Part No. Unit
MSRP
52-820
$
Low Profile Rivets for replacement of OEM on inside of fairings. Fitment
Part No.
Unit
Honda GL1800 2001-2013
3-106
10 pk.
90
MSRP $
6.95
24.95
NEW Brake Light Conversion Harness This part adds a brake light function to the OEM lower saddlebag light assembly. The Plug N’ Go harness plugs into existing points on the bike, to easily add the brake light function to the lower saddlebag. Fitment
Part No. Unit
MSRP
Honda GL1800
52-812
$
Each
19.95
3 Pin Connector Adapter Pigtail Show Chrome Accessories® offers a Plug ‘n’ Go option for front lighted accessories on the Honda GL1800 Gold Wing 2006-2010 models. This Adapter allows items with 2001-2005 connectors to be used on 2006-2010 Gold Wings. Plug into the existing wire harness, no splicing required. Use the 3 Pin Connector Adapter Pigtail to convert the Fitment following Show Chrome Accessories® for use on Honda GL1800 2006-2010 the 2006-2010 models (52-697A, 52-727, 52-728, 52-743, 52-747A).
Part No. Unit MSRP 52-765
Dual Load Equalizer Low Profile Plastic Rivets
Pair
Dual Load Equalizer is designed to allow LED turn signals to operate in place of the stock incandescent bulb turn signals without replacing the flasher module. Item splices into existing turn signal system. Description
Part No.
Unit
MSRP
Dual Load Equalizer
13-304A
Each
$
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
29.95
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
Pair
19.95
$
AUDIO
GL1500: FRONT
PEGS, BOARDS & GRIPS
1
COVERS LUGGAGE & BAGS
Tour Headlight Lower Grille
2
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-429
Each
$
WINDSHIELDS
This chromed ABS Headlight Lower Grille is an OEM replacement for all Honda GL1500/6 Gold Wings. 19.95 3
CRUISER ACCESSORIES TOURING ACCESSORIES
Designed to update all pre-1998 Gold Wings to the 1998-2000 look. Three piece set. Fitment
Part No.
Unit
Honda GL1500/6 1988-2000
2-497
Pair
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
52-562
Each
$
99.95
2
125.95
Chrome Steel Trim Plugs
This copyrighted all steel design is a Show Chrome exclusive, smoothly complementing the graceful lines of your Honda GL1500/6 fender. Its four point installation won’t slip or move.
Fitment
Part No.
Unit
Fitment
Part No.
Unit
MSRP
7⁄8” trim plugs fit side holes of the Rotor Cover (2-497)
3-102
Set of 4
Honda GL1500/6 1988-2000
2-419
Each
$
Fitment
Part No.
Unit
Amber Illuminated Rotor Accent
2-452L
Kit
$
Tri-color (amber, blue, red) Illuminated Rotor Accent
2-452T
Kit
$
MSRP 16.95
$
74.95
LICENSE PLATE ACCESSORIES
3
Front Fender Rail
Illuminated Rotor Accents
Add Rotor Cover Trim to your GL1500/1600 and add some style. Easy installation.
MSRP 159.95
Part No.
Unit
MSRP
Replacement LED Light Strip for 2-452L (Amber)
10-2624A
Pair
$
GL1500/6 1988-1997
2-277
Pair
$
18.95
Replacement LED Tri-Color Light Strip for 2-452T
10-2624
Pair
$
www.bigbikeparts.com
•
119.95
E-mail us info@bigbikeparts.com
145.95
91
GENERAL ACCESSORIES
179.95
Fitment
LIGHTING
Chromed ABS Rotor Accents fit over your Honda GL1500/6 rotor cover with cut outs for lights to glow from behind. Two rows of LED’s glowing inward and outward. Set comes complete with LED rotor lights in Amber or Tri-color (red, blue, amber).
Rotor Cover Trim
FLAGS & FLAG POLE MOUNTS
MSRP $
AT V ACCESSORIES
Chrome Front Rotor Cover
LED Day-Running Light
A key to safety is being seen. This chrome front headlight vent is not only a stunning accent, it is a safety accessory to let oncoming traffic see you first. It incorporates 17 Hi-Intensity Day Running LED’s into the Front Headlight Vent updating any of the 1988 through 2000 GL1500 Goldwings.
CAN AM ACCESSORIES
1
GL1500: FRONT
Touring Accessories
Extended LampGard
TM
This precisely contoured Extended LampGard™ provides an exact fit and protects all three sections of the Honda GL1500/6 headlamp from flying stones or other debris. Installs quick and easy with centering targets and special heat resistant dual lock fasteners and can be easily removed for cleaning. Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-402
Each
$
22.95
Mini Halogen Driving Lights These Mini Halogen Driving Lights are truly the smallest spot lights available, utilizing the bright 50 Watt high intensity halogen bulb. Comes with mounting bracket and wire harness. Fitment
Part No.
Honda GL1500/6 1988-2000
2-542
Replacement Bulb
10-1624
Unit Kit Each
MSRP 159.95
$
10.95
$
Arm Mount Driving Light Kit This kit features a wide fairing arm mount light bracket with a pair of high quality chromed steel halogen driving lights and basic wiring kit. The lights mount high off the ground for excellent down-theroad visibility.
52-595
Honda GL1500/6 1988-2000
2-422
Unit Kit
MSRP 99.95
$
MSRP
Show Chrome Accessories® replacement for the sought after SE style cornering light trim. Eliminates need for the unsightly rubber gasket.Fits with BBP 52-595.
119.95
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
52-573
Pair
$
Provides fog lights which are constantly on, in lieu of OEM cornering lights. Brings the 1998 look to your Honda GL1500/6. Works with Chrome Cornering Light Trim (52-573). Fitment
Part No.
Unit
Honda GL1500/6 Driving Light 1988-2000
52-595
Set
Replacement Bulb
10-2595
Each
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Part No.
Chrome Driving Light Trim
Driving Light Kit
92
Fitment
•
$
$
6.95
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
39.95
AUDIO
GL1500: FRONT
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS
LED Visored Mirror Trim
Fitment
Part No.
Unit
Honda GL1500 1988-2000
52-560
Pair
MSRP 109.95
$
WINDSHIELDS
This chromed ABS Visored Mirror Trim contains a red LED turn signal for added accent on your bike. Connects into existing wire harness, with T-taps provided.
NEW Front Fender Accent Part No. Unit MSRP
Honda GL1500
52-569
Each
$
29.95
ABS Mirror Back Accents Set
Chromed ABS Fender Extension helps protect lower cowl. Included required hardware. Drilling is required. 3-3/4”L Extension.
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-279
Pair
$
Fitment
Part No. Unit MSRP
Honda GL1500/6 2-284 1988-2000
36.95
Each
$
29.95
AT V ACCESSORIES
High quality pressure sensitive tape is attached for a quick and secure installation.
CAN AM ACCESSORIES
Front Fender Extender
TOURING ACCESSORIES
Fitment
CRUISER ACCESSORIES
This ABS chrome Front Fender Tip Accent compliments the GL1500 with its contoured tapered design for a fresh current look. Easily mounts with double sided tape included. For 1988- 2000 GL1500 Goldwings.
FLAGS & FLAG POLE MOUNTS
Chrome Mirror Units These chrome finished mirrors are a replacement for the Honda GL1500/6 OEM mirrors. Attaches with existing hardware. Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-445
Pair
$
Part No. Unit
Honda GL1500/6 52-554 1988-2000
Each
MSRP $
39.95 GENERAL ACCESSORIES
Fitment
Fitment
99.95
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
LIGHTING
Add shape and depth to your bike’s front end with this Fender Extension in the raised rib pattern. Drilling is required. 4-1/2”L Extension.
LICENSE PLATE ACCESSORIES
Front Fender Extension
93
GL1500: FRONT
Touring Accessories
2-451
Tour Windshield Accent
Lower Cowl Housing
Chrome plated Windshield Accent is an OEM replacement updating the older Honda GL1500/6 models to match the 1995-2000 styling. Attaches with mounting bracket and fresh air louvers provided.
Chromed ABS cowl housing replaces the dull gray or painted OEM lower front cowl. Fitment
Part No.
Unit
Honda GL1500/6 1988-2000
2-438
Each
2-82
MSRP 110.95
$
Fitment
Part No.
Unit
Plain Tour Windshield Accent 1988-2000
2-451
Each $139.95
Tour Windshield Accent with Screaming Eagle Emblem
2-451E
Kit
6 1/2� Screaming Eagle Emblem only (gold) 2-82
MSRP 159.95
$
Each
$
29.95
Lower Cowl Accent
Fork Cover
The chromed ABS Lower Cowl Accent brightens the front louvers on the gray or color matched front lower cowl housing. Drilling is required.
The chromed ABS Fork Cover is an exact replacement for the stock cover.
Fitment
Part No.
Unit
MSRP
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-345
Each
$
Honda GL1500/6 1988-2000
2-291
Each
$
35.95
34.95
Tubular Radiator Grille Steel tubular designed Radiator Grille attaches onto the original Honda GL1500/6 equipment frame.
94
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-432
Each
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
89.95
1
Chromed ABS Light Front Turn Signal Grilles fit over the fairing turn signal on all Honda GL1500/6’s. Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-435
Pair
$
25.95
Front Position Light Grilles
COVERS
2
PEGS, BOARDS & GRIPS
Front Turn Grilles
AUDIO
GL1500: FRONT
Chromed ABS Light Front Position Light Grilles fit over the position lights on all Honda GL1500/6’s. Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-436
Pair
$
29.95
Chrome plated Fairing Marker Light Grilles replace the black plastic strips along the fairing side lights. Part No.
Unit
Honda GL1500/6 1988-2000
2-255
Set
4
$
45.95
Fairing Vent Trim
The chromed ABS Trim accent brightens the area in front of the side louver. Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-336
Pair
$
19.95
5
4
6
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000, Valkyrie
2-495
Pair
$
6
79.95
Tour Cylinder Covers
Chrome plated Tour Cylinder Covers replace the Honda GL1500/6 OEM covers with a clean, bright chrome finish. Complete with required tappet screws. Part No.
Honda GL1500/6 1988-2000, Valkyrie
2-480
Valve Cover Tappet Bolts for 2-480
900480B
Unit Kit Each
MSRP $
399.95 12.95
$
Touring Cornering Light Grilles
LICENSE PLATE ACCESSORIES
Fitment
FLAGS & FLAG POLE MOUNTS
7
Fitment
AT V ACCESSORIES
5
Fairing Side Fin Louvers
Chromed ABS Fairing Side Fin Louvers replace the stock OEM black louvers with bright chrome.
CAN AM ACCESSORIES
3
TOURING ACCESSORIES
2
MSRP
CRUISER ACCESSORIES
1
Fitment
WINDSHIELDS
Fairing Marker Light Grilles 3
LUGGAGE & BAGS
Fitment
7
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-481
Pair
$
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
24.95
95
GENERAL ACCESSORIES
Fitment
LIGHTING
Chromed ABS Cornering Light Grilles easily fit over the GL1500/6 cornering lights. Their wide sweeping lines do not block the effectiveness of your lights.
GL1500: FRONT
Touring Accessories 1
1
2
3
1
Fairing Vent Trim
This chromed ABS accent trim brightens the area in front of the engine side louver. Drilling is required. 2
Fitment
Part No.
Unit
MSRP
Honda GL1500/6
2-336
Pair
$
2
1
Upper Fairing Edge Trim
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
52-551
Pair
$
39.95
Lower Fairing Corner Molding Trim
Bright chrome trim replaces the OEM painted lower fairing corner molding. Fitment
Part No.
Honda GL1500/6 1988-2000
52-550
3
Unit Kit
MSRP $
84.95
Fairing Side Fin Louvers
These chromed ABS Fairing Side Fin Louvers replace the OEM black louvers with bright chrome. Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-495
Pair
$
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-425
Pair
$
•
Part No.
Unit
MSRP
Honda GL1500/6 1988-1997
2-290
Pair
$
25.95
Fairing Side Light Housing For more light and safety, use these exact OEM replacements for old, broken or wornout housings. Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
52-558
Pair
$
49.95
Fairing Light Harness Kit
This kit makes the side fairing marker lights flash alternately with the turn signals, making this a true safety necessity allowing greater visibility of your turning intentions. Plugs into existing wire harness, no splicing required. Requires Fairing Light Harness Kit (2-281) to operate.
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Fitment
79.95
Fairing Marker Turn Signal Kit
96
Fairing Lower Louver Set
The chromed ABS covers fit over the black stock fairing lower louvers. No drilling required.
Bright chrome trim replaces the OEM painted upper edge trim that connects to the mirror trim and lower trim.
2
19.95
14.95
Two pieces for left & right side. Wire harness only. 12 Volt 3 watt wedge. Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-281
Pair
$
Replacement Bulbs
10-281
10 pk.
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
12.95 9.95
$
Part No.
Unit
MSRP
Honda GL1500 1988-2000
52-563
Each
$
45.95
Fitment
Part No. Unit Each
$
29.95
Lower Fresh Air Vents These chromed ABS Air Vents are used to replace the OEM vents. Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
52-552
Pair
$
54.95
The Radio Panel Accent replaces the scratched up and dull console area with a custom fit chrome accent for a new look. This chrome plated, stamped steel accent attaches to the panel securely and easily with double sided tape provided.
TOURING ACCESSORIES
Fitment
CRUISER ACCESSORIES
Chrome Radio Panel Accent
Part No.
Unit
MSRP
Aspencade 1990-2000 (8 Button) & Honda GL1500 SE 1990-2000
52-561
Each
$
29.95
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
52-557
Pair
$
89.95
Back by popular demand this panel adds a beautiful chrome touch. Includes a cigarette lighter and four accessory switches. Attaches with double sided tape provided. Fitment
FLAGS & FLAG POLE MOUNTS
Fitment
AT V ACCESSORIES
Chromed ABS Hot Air Vents replace OEM black plastic vents. Easily snaps in place.
Part No. Unit MSRP Kit
$
36.95
Cigarette Lighter Kit
Fairing Upper Skirt Fitment
Part No.
Unit
MSRP
Honda GL1500/6
2-374
Each
$
36.95
Fitment
Part No.
Unit
Cigarette Lighter Kit
52-768
Set
Replacement Element
52-768A
Each
Accessory Socket Honda GL 1800 2001-2010
52-748
Each
www.bigbikeparts.com
•
MSRP 15.95
$
$
6.95
10.95
$
E-mail us info@bigbikeparts.com
97
GENERAL ACCESSORIES
This chrome plated accent skirt fastens under the Honda GL1500/6 fairing for a dressed-up look. Easily attaches into the two existing holes.
LIGHTING
Gold Wing riders have the ability to use electrical devices that plug into accessory sockets as well as a cigarette lighter. The Cigarette Lighter plugs in easily to the on-bike accessory harness. Drilling is required for installation. The wire harness uses the Plug ‘n’ Go design for the Honda GL1800. Additional connectors are provided for universal applications.
LICENSE PLATE ACCESSORIES
Honda 2-316 GL1500/6
CAN AM ACCESSORIES
Fitment
CB Knockout
Chrome Hot Air Vents
WINDSHIELDS
Honda GL1500/6 1988-1989, 1990-1995 Goldwing Aspencades 52-566
MSRP
LUGGAGE & BAGS
Fitment
Chrome Stamped Steel Radio Accent covers those scratched and dull radio consoles with a custom fit chrome plated steel accent. It attaches securely and easily with double sided tape provided. Fits 6 button GL1500 radios as used on 1988-89 Goldwings and 1990-1995 Goldwing Aspencades.
COVERS
Universal Radio Cover to fit all GL1500 Gold Wing Radio’s from 1988 through 2000. Made from impact resistant durable smoke poly carbonate and its transparent design is an instant match to any GL1500 Gold Wing, protecting your radio from rain and dirt.
Chrome Radio Accent
PEGS, BOARDS & GRIPS
Radio Cover
AUDIO
GL1500: COCKPIT
GL1500: COCKPIT
Touring Accessories 1
Mirror Mount Covers
Tour Front Speaker Accents 2
Chrome covers to replace the OEM Mirror Mount Cover between the rubber mirror boot and the fairing on the GL1500/6. Fitment
Part No.
Unit MSRP
Honda GL1500/6 1988-2000
2-493
Pair
$
3
Bright chrome plated steel accents. They come with double sided tape and four screws for secure installation.
59.95
Fitment
Part No.
Unit MSRP
Honda GL1500/6 1988-2000
2-482
Pair
$
39.95
Instrument Accent
Chrome plated Instrument Accent adds a finishing touch to the GL1500/6 instrument panel. Installation is easily done with double sided tape and four screws. Fitment
Part No.
Unit MSRP
Honda GL1500/6 1988-2000
2-418
Each
3 1 2
5 6
4
7
8
9
10 11
12 13 14
15
16
17
19
20
18
98
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
$
25.95
4
Headlight Beam Adjusting Knob
10
Coin Holder
Air Pressure Control Accent
Chrome plated knob is an exact replacement for the black stock knob.
Chrome plated, diecast coin holder is designed to store a generous amount of coins and folded money on motorcycle handlebars. The holder attaches to a permanently mounted vibration free bracket. Quickly disconnects for total security.
Chrome accent trim.
Part No.
Unit MSRP
Honda GL1500/6 1988-2000
2-285
Each
12.95
$
Fitment
Part No.
Unit MSRP
Honda GL1500/6 1988-2000
2-338
Set
Ignition Switch Circle only
2-338C
Each
39.95 9.95
$
Set
$
Universal Applications
2-434A
Kit
$
11
Kill Switch Cover
Unit MSRP
Honda GL1500/6 1988-2000 & Valkyrie Interstate 1999-2000
2-489
Pair
$
Unit MSRP
2-492
Each
Unit MSRP
2-442
Each
12.95
$
10.95
$
Part No.
Unit MSRP $
29.95
Fader Control Knob This chromed ABS knob fits the SE handlebar fader control, replacing the OEM black knob with chrome. Part No.
Unit MSRP
Honda GL1500/6 1992-2000
2-426
Each
$
5.95
Easy Clip Cord Holder
Fitment
Part No.
Unit MSRP
Honda GL1500 1988-2000
2-494
Pair
16.95
$
Part No.
Unit MSRP
Honda GL1500/6 1988-2000
2-428
Each
$
6.95
18-101 18-102
Fitment
Part No.
Unit MSRP
Honda GL1500/6 1988-2000
2-458
Pair
$
6.95
Smooth Blade Brake & Clutch Levers
Chrome accent trim for Reverse Handle.
Brake Lever
Fitment
Part No.
Unit MSRP
Honda GL1500/6 1990-2000
2-381
Each
12
Part No.
19
Unit MSRP Each
$
29.95
20
Part No.
Honda GL1500/6 1985-2000 18-102 Replaces OEM 53178-MN5-006
Unit MSRP Each
$
29.95
16.95
$
Fuel Door Accent
Chrome accent trim.
Fitment
13
Reverse Handle Cover
Fitment
Part No.
Unit MSRP
Honda GL1500/6 1988-2000
2-253
Each
$
22.95
C.B. Unit Accent Panel
Chrome accent trim. Fitment
Part No.
Unit MSRP
Honda GL1500/6 1988-2000
2-332
Each
14
16.95
$
Radio Side Accent Set
This set of bright chrome plated accents highlight the left & right side of the Honda GL1500/6 radio. High quality pressure sensitive tape plus screws for easy installation.
Right Hand Pocket Cover
Fitment
Part No.
Unit MSRP
Fitment
Part No.
Unit MSRP
Honda GL1500/6 1988-2000
2-347
Pair
Honda GL1500/6
2-252
Each
$
Chrome accent trim.
39.95
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
$
32.95
99
GENERAL ACCESSORIES
A true one handed intercom cord holder to firmly hold the headset cord plug.
Fitment
LIGHTING
Fitment
24.95
LICENSE PLATE ACCESSORIES
Each
$
This pair of chromed ABS screw covers replace those OEM covers so easily lost on the Honda GL1500/6 lower fairing.
Clutch Lever
Honda GL1500/6 SE 1992-2000 2-459
Set
FLAGS & FLAG POLE MOUNTS
Fitment
Unit MSRP
2-361
Lower Fairing Chrome Plugs
Honda GL1500/6 1990-2000 18-101 Replaces OEM 53175-MT8-016
2-459
Part No.
Honda GL1500/6 1988-2000
18
Fitment
Fits over the C.B. unit on 1992-2000 Honda GL1500/6 SE models.
Fitment
AT V ACCESSORIES
SE C.B. Switch Cover 8
Radio Control Knob Set
CAN AM ACCESSORIES
Part No.
Honda GL1500/6 1988-2000
11.95
$
This chromed ABS knob fits the rear passenger accessory volume knob replacing the stock black knob.
SE Lower Vent Knob
Fitment
Pair
Passenger Volume Knob
39.95
This knob comes labeled “lower vent” to replace the stock OEM SE Lower Vent Knob on the Honda GL1500/6.
Unit MSRP
2-526
TOURING ACCESSORIES
Part No.
Part No.
Honda GL1500/6 1988-2000
Part No.
Honda GL1500/6 1988-2000
Simply pull off the stock black knobs & popon these attractive chrome plated knobs for a custom touch.
29.95
Fitment
Chrome C.B. Knobs
Fitment
17
29.95
16.95
$
CRUISER ACCESSORIES
Chrome Air Vent
Fitment
9
Unit MSRP
2-434
Each
16
This bright chrome plated Kill Switch Cover fits easily over the stock kill switch on the Honda GL1500/6. A locator line is stamped into the design to provide instant visual identification of its position. Attaches with double sided tape.
Chrome replacements for the upper air vents on 1988-2000 Honda GL1500/6 Gold Wings and 1999-2000 Valkyrie Interstate.
7
Part No.
Honda GL 1200 & 1500
Unit MSRP
2-262
WINDSHIELDS
6
$
Fitment
Part No.
Honda GL1500/6 1988-2000
LUGGAGE & BAGS
Two piece Show Chrome Accessories® set attaches with high quality pressure sensitive tape.
Fitment
COVERS
Ignition Panel & Key Switch Accent Set 5
15
PEGS, BOARDS & GRIPS
Fitment
AUDIO
GL1500: COCKPIT
GL1500: COCKPIT
Touring Accessories
2 1
NEW Smart Mount Backrest TM
1
MSRP
This backrest attaches through the seat and only the backrest pad and support arm sit above the driver’s seat. This eliminates all side mounting brackets and the backrest hoop, making a clean look and more leg room for the rear passenger. This new system utilizes Big Bike Parts® copyrighted pad hinge and adjustable tongue, allowing the backrest pad to mount up or down with 1” of adjustment, as well as pivoting forward or back. Comes with all required hardware. Backrest includes a handy removable storage pouch on the backside. Made in the USA.
219.95
Fitment
Part No.
Unit
Honda GL1500
52-567
Set
Driver Backrest Pad Set
This high quality, color matched backrest pad, easily tilts forward for passenger access. Thick padded tube covers provide a clean custom fit. The Show Chrome plated tubing assembly can easily be adjusted fore and aft while sitting. Included is a dettachable storage pouch on the backrest pad. Description
Part No.
Black Honda GL1500/6 1988-2000
2-377
Kit
Replacement Pad, Black Honda GL1500/6
2-377X
Set
$
Replacement Backrest Coupler Nut
900371BC
Each
$
Replacement Nylon Compression Collar
P11610N
Each
Replacement Pouch
902377P0
Each
$
Replacement Sleeve for Backrest (Black)
902377SL
Each
$
2
Unit $
79.95
MSRP 199.95
$
14.95 1.95
$
34.95 14.95
Passenger Armrests
Our high quality color matched passenger armrest pads, conveniently swing back out of the way for easy passenger access. They easily bolt to the antenna mounts on each side. Color coordinated with our driver backrests. Use No. 2-470 mounting bracket if no C.B. is present. Description
Part No.
Black Armrest Honda GL1500/6 1988-2000
2-477
Unit Kit
MSRP
149.95
$
Replacement Pad, Black Honda GL1500/6
2-477X
Pair
$
Armrest Mounting Bracket (Left Side without CB) Fits GL1500/6 1988-2000
2-470
Each
$
99.95 29.95
Seat Tie Down Brackets Custom contoured Seat Tie Down Brackets are the ideal way to attach bungee hooks to your Goldwing seat. The tie down brackets are shaped for easy use and mount behind the left and right seat handles. Has a black powder coat finish. Fitment
Part No.
Honda GL1800 2001-2013 (not F6B) 52-802
100
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Unit Set of 4
500 Series Wind Deflectors These Tour Wind Deflectors come with a shorter mounting arm to provide a streamlined fit. The specially contoured panels are shaped to close tight to the fairing, providing less air movement behind the panels. Easy installation, no drilling is required. Dimension 11”L x 7”W. Fitment
Color Part No.
Unit
MSRP
MSRP
Honda GL1500/6 1988-2000
Clear 2-568
Set
$
89.95
14.95
Honda GL1500/6 1988-2000
Smoke 2-565
Set
$
89.95
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
Part No.
Honda GL1500/6 1988-2000
H15TPVBK Each
Unit
MSRP $
25.95
Map Holders are made of marine grade vinyl with non-marring back to protect against scratches. The map is covered with UV clear plastic. Unique custom attaching system. Map viewing area 9-1/2” x 9-1/2”.
H15TMBK Each $16.95
Honda GL1500/6 19882000 (Burgundy)
H15TMBU Each 12.95
Part No.
Unit
MSRP
Honda GL1200, 1500, 1800, ST1300 & more
HDPBK
Each
$
Burgundy (right) H15APTBU Each $12.95 Charcoal (right)
H15APTCH Each $12.95
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
H15LPC-2BK
Each
$
39.95
Premium Double AddA-Pocket Similar to the Premium AddA-Pocket, but with a large zipper compartment and a convenient utility pouch. These pockets slip over the fairing pocket hard cover. Made of high quality, weather resistant marine grade vinyl with non-marring back. Pocket is hinged for easy access. Dimension 10”L x 7”W x 3”H. Fitment
Part No.
Honda GL1500/6 (right)
H15AP-2BK Each
$
39.95
Honda GL1500/6 (left)
H15LP-2BK Each
$
39.95
www.bigbikeparts.com
•
Unit
MSRP
E-mail us info@bigbikeparts.com
101
GENERAL ACCESSORIES
H15LPTBU Each $12.95
25.95
This pouch is designed with a clear top pouch (5” x 2-1/2” x 1”) to accommodate and provide access to GPS, MP3 and other various electronic devices. The roomy bottom pouch has both zippered and hook and loop closures for optimal security of items placed within.
LIGHTING
Burgundy (left)
34.95
LICENSE PLATE ACCESSORIES
Unit MSRP
Each
FLAGS & FLAG POLE MOUNTS
Fitment
Part No.
ARC-1BK
AT V ACCESSORIES
Universal Dash Pouch from Hopnel™ helps you easily access your wallet, license, garage door opener or extra glasses. Constructed of weather resistant material with a protective flap and an exposed zipper pull for easy accessibility. It attaches to the dash with double sided hook and loop for portability. The 9” x 4.5” x 2” Universal Dash Pouch will fit any motorcycle with an exposed dash.
Description
Honda GL1200 & GL1500/6
CAN AM ACCESSORIES
Universal Dash Pouch
This innovative product incorporates a useful sunglass case/utility pocket into the cover. Pockets on covers are hinged for easy access. Dimension 9-1/2”L x 7”W x 1”H. Fits Honda GL1500/6 1988-2000.
MSRP $
Premium Double AddA-Pocket With Clear Pouch
$
Add-A-Pocket
Unit
TOURING ACCESSORIES
Part No. Unit MSRP
Honda GL1500/6 19882000 (Black)
Part No.
CRUISER ACCESSORIES
Fitment
Fitment
WINDSHIELDS
Map Holders
LUGGAGE & BAGS
Fitment
This pouch mounts to the passenger armrest on Honda GL1200 and GL1500/6. Pouch has convenient pocket and is color coordinated to match your Gold Wing. Dimension 8”L x 8”W x 3”H.
COVERS
The Tank Pouch slips on the gas tank access door adding extra storage without the bulk of a larger tank bag. The pouch is secured with hook and loop closures and the non-marring back prevents scratches to the access door. Dimension 9-1/2”L x 7”W x 1”H.
PEGS, BOARDS & GRIPS
Passenger Armrest Pouch
Tank Pouch
AUDIO
GL1500: COCKPIT
GL1500: COCKPIT
Touring Accessories 52-605A
Master Cylinder Covers Aluminum die-cast cylinder cover in the popular Free Spirit design. Dimension 3-1/4”L x 1-3/4”W x 1/2”H. Fitment
Part No.
Unit
MSRP
Honda GL1500/6
2-447
Pair
$
29.95
52-705MA
LED Master Cylinder Switch Block LED Switch Block Assemblies incorporate three rocker style switches with bright amber LED’s. Mount on the brake side of the bike and easily control auxiliary driving, fog, or marker lights on Cruisers or Gold Wings. The Switch Block Assembly fits the master cylinder for an integrated OEM look. Fits Honda GL1500/GL1800, VTX1300/VTX1800, VT600, VT750, VT1100, VT1300 Fury, Interstate, Stateline, Sabre, VF750, Valkyrie, Yamaha Royal Star & Road Star. Fitment
Part No.
Unit
Chrome (left/clutch)
52-605LA
Set
MSRP $
Chrome (right/brake)
52-605A
Set
$
Matte (left/clutch)
52-705LMA
Set
$
Matte (right/brake)
52-705MA
Set
$
Replacement Switch
16-28
79.95
Teardrop Master Cylinder Covers Aluminum die-cast cylinder cover in teardrop design. Dimension 3-1/4”L x 1-3/4”W x 1/2”H. Fitment
Part No.
Unit
MSRP
Honda GL1500/6
53-747
Pair
$
49.95
79.95 79.95 79.95
Each
$
2.95
52-605
Master Cylinder Top Covers
52-705LM
Aluminum die-cast in a classic design. Dimension 3-1/4”L x 1-3/4”W x 1/2”H. Fitment
Part No.
Unit
MSRP
Honda GL1500/6
2-288
Pair
$
25.95
Master Cylinder Switch Block The Switch Block Assembly fits master cylinders and houses three switches for auxiliary controls of lighting. The assembly is available in chrome and a matte black finish. Shown with our Master Cylinder Top Cover (2-288). Patent Pending. Fits Honda GL1500/GL1800, VTX1300/VTX1800, VT600, VT750, VT1100, VT1300 Fury, Interstate, Stateline, Sabre, VF750, Valkyrie, Yamaha Royal Star & Road Star.
Mounts on the master cylinder with longer screws provided. Slots to hold quarters, nickels and dimes. Includes clear plastic top cover to keep out the elements. Patent pending. Dimension 3-1/2”L x 1-3/4”W x 1-1/8”H.
Fitment
Part No.
Unit
Chrome (right/brake)
52-605
Set
$
69.95
Fitment
Part No.
Unit
MSRP
Matte (left/clutch)
52-705LM
Set
$
69.95
Honda GL1500/6
52-689
Each
$
Replacement Plastic Cover
952689C
Each
Replacement Switch 6A at 12.5V For 52-605, 52-705LM (Requires Soldering)
16-29
102
•
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Each
MSRP
Coin Holder
$
4.95
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
29.95 $
4.95
Free Spirit Cam Covers
The Cruis Wing™ Kickstand design has a larger base promising more stability in the rest position.
For the Honda GL1500/6 and the Valkyrie. Dimension 3”L x 3-1/2”W.
TM
Part No.
Unit
Honda GL1500/6 1992-2000
52-548
Each
Fitment
MSRP
Honda GL1500/6 1988-2000 & Valkyrie
105.95
$
Part No.
Unit
MSRP
1-314
Pair
$
Part No.
Unit
MSRP
2-427
Pair
$
45.95
LUGGAGE & BAGS
Cam End Covers For the Honda GL1500/6 1988-2000 and the Valkyrie.
Kickstand Assist
Fitment
Part No. Unit MSRP
The chrome plated Kickstand Assist reduces the lean angle and extends the length of the stock kickstand for easier use with floorboards.
Honda GL1500/6 2-286 1988-2000 & Valkyrie
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-348A
Each
$
Fork Cover Caps
29.95
Part No.
Unit
MSRP
2-270
Pair
$
29.95
Key Plate Accent
Handlebar Helmet Holder Set The chrome Handlebar Helmet Holder Set replaces the stock brake and clutch lever. For #2-354 - Replaces 6mm right standard thread bolts for brake and clutch levers for most metric cruisers.
Part No. Unit MSRP
Description
8.95
Unit
MSRP
2-354
Pair
$
One Handlebar Helmet Holder & Padlock
53-113
Kit
$
19.95
14.95
TM
Pair of chrome plated lock extenders make helmet locking easier by going through the helmet “D” ring and letting the helmet hang freely. 3-1/2”L.
Fitment
Part No.
Unit
MSRP
Honda GL1500
52-645
Pair
$
25.95
Description
Part No. Unit
Helmet Lock Extensions Honda GL1500 1988-2000
2-416
www.bigbikeparts.com
•
MSRP
Pair
E-mail us info@bigbikeparts.com
12.95
$
103
GENERAL ACCESSORIES
These extensions allow for the securing of the helmet through its strap ring onto the bikes locking device. Its 1-3/8” wide design can accommodate the oversized “D” and “H” rings found on today’s helmets.
LIGHTING
Helmet Lock Extensions
LICENSE PLATE ACCESSORIES
Cruis Wing Helmet Lock Extensions
Part No.
Handlebar Helmet Holder
FLAGS & FLAG POLE MOUNTS
Chrome plated Key Plate Accent protects the paint around any 1-1 ⁄4” key lock slot. Ideal for the trunk lock. $
AT V ACCESSORIES
Honda GL1500/6 1988-2000
53-113
CAN AM ACCESSORIES
2-354
10.95
TOURING ACCESSORIES
Honda GL1500/6 1988-2000
Fitment
Each
CRUISER ACCESSORIES
Fitment
Bright chrome plated plates attach to the saddlebag with pressure sensitive tape to prevent heel scuff marks from passengers.
Honda GL1500/6 1988- 2-444 2000
$
This pair of chromed ABS Fork Cover Caps replace the threaded OEM caps on Honda GL1500/6 19902000 Aspencade and SE models. Dimension 1-1/2”L x 1-1/2”W x 1/2”H.
Saddlebag Kickplate Set
Fitment
Pair
WINDSHIELDS
59.95
COVERS
Fitment
PEGS, BOARDS & GRIPS
Cruis Wing Kickstand
AUDIO
GL1500: COCKPIT/REAR
GL1500: REAR
Touring Accessories Trunk CubbyHolds
Engine Lower Side Covers
Pair of clear acrylic panels easily install under the existing acorn nuts and wrap around the sides and front of the trunk. They do not interfere with trunk bags or helmet storage and make usable compartments on the sides & Trunk CubbyHolds™.
Replace the drab gray or color matched piece between the upper engine side cover and the rear step cover with shining chrome. Easily installs with only a Phillips head screwdriver, instantly brightening this dull area on the Honda GL1500/6.
TM
Fitment
Part No.
Unit
MSRP
Honda GL1500 1988-2000
2-410
Pair
$
28.95
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-415
Pair
$
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-439
Pair
$
Engine Side Carb Covers These chrome plated Side Carb Covers are an exact OEM replacement including foam insulation backing. Replace those flat gray covers with shiny chrome covers.
55.95
Carb Covers
Trunk CubbyNet
TM
Add a little chrome to your carburetors with Show Chrome Accessories® Carb Covers for your Honda Valkyrie.
The Trunk CubbyNet™ provides a simple and convenient place to store a bike cover. This elastic cord net attaches quickly to the Honda GL1500/6 trunk lid. Fitment
Part No.
Unit
Honda GL1500/6 1988-2000
H15407
Each
MSRP 7.95
$
Saddlebag CubbyNets
Fitment
Part No.
Unit
Honda Valkyrie
1-308
Set
MSRP $
89.95
Tour Rear Speaker Accents
TM
This pair of elastic corded nets attach quickly to the Honda GL1500/6 saddlebag lid providing a great place to store a rainsuit without disrupting anything else.
Chromed ABS Rear Speaker Accents for the Honda GL1500/6.
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
H15406
Pair
$
10.95
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-487
Pair
$
29.95
Passenger Floorboard Relocation Kit
Saddlebag CubbyPouch
TM
Turns the saddlebag lid into a handy storage pouch. Comes with mounting snaps for easy installation and removal. Measures 19” L x 6-1 ⁄ 2” D.
Easily mounts into stock holes enabling the OEM passenger floorboards to be relocated into one of three positions, without removal of bolts. Raises about 2”-3”. Dimension 7-1/2”L x 4-3/4”W x 1/4”H.
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-505
Pair
$
104
84.95
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
25.95
Description
Part No.
Unit
Honda GL1500 1988-2000
2-321
Set
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP $
59.95
AUDIO
GL1500: REAR
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS
Tour Luggage Rack
Fitment Honda GL1500/6 1988-2000
Part No.
Unit
MSRP
2-430
Each
$
WINDSHIELDS
Large chrome plated Tour Luggage Rack works well with or without the OEM GL1500/6 spoiler. Our luggage bags fit perfectly on this rack see page 20. The manufacturer’s trunk specs should be referenced for loading limit. Dimension 21-1/2”L x 13”W x 5-3/4”H. 84.95
TM
Trike Fender Racks
Fitment
Part No.
Unit
Honda GL1500/6 1988-2000
52-703
Each
MSRP $
349.95
Part No.
Unit
Trike Fender Racks
41-130
Pair
MSRP 149.95
$
AT V ACCESSORIES
Description
CAN AM ACCESSORIES
Built with high luster chrome plated steel tube. The Trike Fender Racks will fit most aftermarket trike bodies and are easily installed with the supplied hardware. Rack size: 12” L x 6-1/4” W.
TOURING ACCESSORIES
The chrome plated CNC Billet Aluminum Luggage Rack comes with a black rubber center inlay. The rack size is 23-1/2” W x 14” D and attaches securely with a four point mounting system to the trunk lid. Drilling is required.
CRUISER ACCESSORIES
Medallion Series Billet Aluminum Luggage Rack
FLAGS & FLAG POLE MOUNTS
1
Deluxe Luggage Rack Chrome License Plate Trim in the OEM 1998 style. Will retro-fit to all model years of the Honda GL1500/6 Gold Wing. Part No.
Unit
MSRP
1 Honda GL1500/6
2-525
Each
$
39.95
Fitment
Part No.
Unit
2 License Plate Holder
3-2
Set
$
39.95
Honda GL1500/6 1988-2000
52-610
Each
www.bigbikeparts.com
•
MSRP 119.95
$
E-mail us info@bigbikeparts.com
105
GENERAL ACCESSORIES
Fitment
LIGHTING
Rear License Plate Trim
This large luggage rack was designed with the Honda Valkyrie Interstate in mind but fits perfectly on the Honda GL1800 Gold Wing as well as the GL1500 Gold Wing. The manufacturer’s trunk specs should be referenced for loading limits. Dimensions are 24”L x 13”W x 7-1/2”H. The hardware comes with tapered stainless steel spacers that allow the rack to easily conform to the curve of almost any trunk. These specially designed washers are recessed to allow the rack feet to sit into the spacer spreading the load over the trunk lid more equally. Rubber washers assure a water tight fit to the trunk lid.
LICENSE PLATE ACCESSORIES
2
GL1500: REAR
Touring Accessories 1
Saddlebag Top Rails
2
Chromed plated Top Rails protect the saddlebag lid from unnecessary scuffing from passenger use. The design matches the contour of the saddlebags and dresses up this area.
3
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-417
Pair
$
65.95
Cruis Wing Accents TM
Decorative tapered chrome steel accent strips give the feel of winged flight. Available in six lengths to be used as fairing, fender or side cover accents on both touring and cruiser motorcycles, trikes and trailers. Attaches with double sided tape provided. U.S. Design Patent D442,121. Description
Part No.
Unit
MSRP
1 220 Accent Grille - 8-3⁄4” long
52-532
Pair
$
29.95
2 400 Accent Grille - 15-7⁄8” long
52-534
Pair
$
39.95
3 500 Accent Grille - 19-3⁄4” long
52-535
Pair
$
44.95
Trunk Lift Handle Chrome plated handle allows for easy lid opening. 1
Fitment
Part No.
Unit
MSRP
Honda GL1500/6
2-376
Each
$
MSRP
25.95
2
1
Trunk Grille Set
Four piece chrome plated Trunk Grille Set attaches on to the trunk side and rear lights. Attaches with double sided tape provided. No drilling required. Fitment
Part No.
Unit
Honda GL1500/6 1988-2000
2-273
Set
2
MSRP 99.95
$
Saddlebag Grille Set
Five piece chrome plated Saddlebag Grille Set easily attaches on to the saddlebag side and rear lights and reflectors. Attaches with double sided tape provided. No drilling required. Fitment
Part No.
Unit
Honda GL1500/6 1988-2000
2-272
Set
106
•
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Star Washers 1 ⁄4” hole, 1-1/4” O.D.
MSRP
Description
Part No.
Unit
99.95
Star Washers
4-231
10 pk.
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
19.95
$
2
COVERS
Rear Trunk Spoiler Light
2-485
Unit Kit
Replacement Light
10-485
Kit
$
Rear Saddlebag Light
MSRP
Replace the center reflector on the Honda GL1500/6 to a dual function running and brake light unit. Complete with OEM plugs and two 12 volt, 8 watt running lights. Matches OEM fit.
239.95
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-350
Each
$
$
69.95
49.95
Fitment
Part No.
Unit
Amber Honda GL1500/6 1988-1997
2-483
Pair
MSRP 159.95
$
CAN AM ACCESSORIES
Saddlebag Side Light Set
Unit
MSRP
2-346A
Pair
$
10-282
10 pk.
Replacement Bulb
FLAGS & FLAG POLE MOUNTS
Part No.
Honda GL1500/6 1988-2000
AT V ACCESSORIES
These Saddlebag Side Lights will replace the OEM reflectors as well as all of the existing aftermarket side lights. Now standard with 6 mini-lights plus an all new lens with improved bezeling. Bulbs are mounted on circuit boards and are easily changeable. The lens is also easily removed with backside mounted screws. Fitment
TOURING ACCESSORIES
Pair of replacement saddlebag running and brake lights gives any Honda GL1500/6, OEM quality turn signals on saddlebags, providing additional safety and visibility.
CRUISER ACCESSORIES
Saddlebag Touring Corner Lights 2
WINDSHIELDS
Part No.
Honda GL1500/6 1988-2000
1
LUGGAGE & BAGS
This running and brake light combination comes unpainted for your custom paint job. High visibility LED light design allows for added safety. Will work with most luggage racks, check fit with your rack. Installs easily with all wiring. Measures 20-1/2” W x 2-7/8” H. Fitment
PEGS, BOARDS & GRIPS
1
AUDIO
GL1500: REAR
89.95 9.95
$
LICENSE PLATE ACCESSORIES
Trunk Turn Signal Kit
Lower Saddlebag Spoiler Light Kit Three piece Spoiler Light Kit easily installs in the lower OEM saddlebag spoiler, providing much needed safety lighting. May be wired as a running or brake light. Part No.
Unit
MSRP
Honda Gl1500/6 1988-2000
2-440
Pair
$
14.95
Fitment
Part No.
Unit
Honda GL1500/6 1988-2000
2-486
Set
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
MSRP $
69.95
107
GENERAL ACCESSORIES
Fitment
LIGHTING
This kit makes the trunk side lights flash alternately with the turn signals, making this a true safety necessity allowing greater visibility of your turning intentions. Requires Trunk Light Harness Kit (2-282) to operate.
GL1500: REAR
Touring Accessories
NEW Single Exhaust Extension
Receiver Hitch
Our uni-frame constructed 1-1/4” receiver hitch easily mounts to the frame of the Honda GL1500/6, providing an almost invisible appearance. Its black powder coat ball mount is easily installed and removed when not in use and is designed to fit with most saddlebag spoilers. A chrome 1-7/8” ball is included and mounting brackets are in place to accommodate most rear mud flaps. Fitment
Part No.
Honda GL1500/6 1988-2000 Receiver Hitch Kit
2-437
Chrome Receiver Tube Mount
900437M
This hitch ball cover fits over any 1-7/8” - 2” size ball to protect from rusting. The chrome plated steel cover comes with a foam insert to insure a perfect fit.
Part No.
Unit MSRP
Hitch Ball Cover
4-229
Each
Kit Each
Fitment
Part No.
Unit
Honda GL1500 1988-1997
2-250
Set
MSRP $
89.95
MSRP $
259.95 $
39.95
Trunk Light Harness Kit Pair of wire harnesses plug into OEM trunk lights and sockets to illuminate all Honda GL1500/6 trunks.
Hitch Ball Cover
Description
Unit
Based on the demand to replace items that are wearing out Big Bike Parts® has temporarily brought back its top selling Single Exhaust Extension for this Goldwing legend. Simple removal of the OEM turndown allows this single extension to slip on, be bolted tight and ready to go.
Fitment
Part No.
Unit
MSRP
Honda GL1500/6 1988-2000
2-282
Pair
$
Replacement Bulb
10-282
10pk.
19.95 9.95
$
Trailer Wire Harness
12.95
$
Replacement Hitch Pin & Clip This zinc plated 1⁄2” Hitch Pin will fit the standard 1-1 ⁄4” receiver hitch used on today’s motorcycles.
This Wiring Harness for the Honda GL1500/6 comes with easy connectors making wiring a snap with only a Phillips screwdriver. The six wire leads are all color coded to make quick connection to the choice of trailer connector.
Part No.
Unit
Fitment
Part No.
Unit
MSRP
4-221
Each
Honda GL1500/6 1988-2000
2-448
Each
$
108
MSRP $
3.95
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
19.95
For 1980-1987 Goldwing
Fitment
Part No.
Unit
Honda GL1000/1100 1975-1983
2-101
Pair
Description
Part No. 2-23D
Unit Kit
MSRP $
44.95
Valve Covers Fitment
Part No.
Each
MSRP 109.95
$
WINDSHIELDS
Honda GL1000/1100 1975-1983 2-100
Unit
LUGGAGE & BAGS
Honda 1980-1987 Goldwing
MSRP 159.95
$
COVERS
GL1000/1100 Timing Belt Covers
PEGS, BOARDS & GRIPS
2 Light Lower Leg Set
2-100
CRUISER ACCESSORIES
Fairing Skirts These Show Chrome finish custom formed fairing skirts cover the seam at the fairing front. Bolts on easily to fairing. No holes to drill. Part No.
Unit
MSRP
Honda GL1200 1984-1987
2-456
Each
$
TOURING ACCESSORIES
Description
49.95
This light bar mounts between the fork and OEM fairing. Approximately 24” between mounting holes for lights. Uses existing hardware.
Part No.
Rubber Splashguard
2-111
Unit Kit
MSRP $
29.95
Unit
MSRP
Honda GL1200 1984-1987 (not SE)
52-104X
Each
$
Saddlebag Turn Signal Conversion Kit Complete OEM replacement turn signal socket set. Converts to double filament running lights/ turn signals. Fitment
Part No.
Attaches to fairing adding handy convenient extra storage. Has a hinged top opening for easy access. Made of high quality weather resistant marine grade vinyl with non-marring back. Dimension 10-1/2”L x 6-1/2”W x 2-1/2”H.
Unit
MSRP
Pair
$
LICENSE PLATE ACCESSORIES
Honda Aspencade LTD/SE & GL1200 2-204 (I/A/L/S) Interstate 1984-1987
Add-APocket
29.95
FLAGS & FLAG POLE MOUNTS
Embossed Wing emblem included. Dimension tapered 10-1/4”L x 8”W with 1/4” thick rubber.
Part No.
22.95
Coin Holder
Description
Part No.
Unit
H12LPBK Each $29.95
Honda GL1200 & GL1500
2-434
Set
www.bigbikeparts.com
•
GENERAL ACCESSORIES
Part No. Unit MSRP
Honda GL1200 1984-1987 (left)
LIGHTING
Chrome plated, die-cast coin holder is designed to store coins and folded money on the handlebar. The holder attaches to a permanently mounted vibration free bracket. Quickly disconnects for total security.
Description
MSRP $
29.95
E-mail us info@bigbikeparts.com
AT V ACCESSORIES
Rubber Splashguard
Fitment
CAN AM ACCESSORIES
GL1200 Light Bar
Description
AUDIO
GL1000 + GL1100 + GL1200
109
CAN AM SPYDER
Can Am Spyder Accessories 1
2
NEW Dashboard Tri-Pouch
1
NEW Fender Accents
Big Bike Parts® introduces a pair of chrome contoured ABS accents for the Can Am Spyder Roadster front fenders. These attractive accents fit just behind the fender marker lights dressing the fender tips with much needed accents. By adding theses accents the fender marker lights take on a more prominence look. Fits both Spyder RS and RT fenders with double sided tape provided. Fitment
Part No.
Unit
MSRP
Can Am Spyder 2008 -
41-150
Pair
$
2
This Tri-Pouch is made from all weather marine vinyl for long term durability. The large center compartment is 9” x 6” x 2”, which is large enough to accommodate almost anything you need quick access to. Each side compartment is 5” x 4” x 1.5”, providing 150 cubic inches of secure storage on your dash. The pouches close with a zipper to insure nothing falls out while riding. The pouches are permanently stitched to a base that attaches to the bike dash with hook and loop. Fitment
Part No.
Unit
Can Am Spyder RT
H41-152BK Each
MSRP $
49.95
45.95
NEW LED Marker Light
Add safety to the Can Am Spyder with a contoured Amber LED Marker Light to replace the reflector. This marker light is thicker than OEM and contoured to better match the lines of the front fender and can be wired as either running or running and turnsignal. With 16 LEDs per side safety is improved by being more visible and putting a turnsignal on the side. Fitment
Part No.
Unit
MSRP
Can Am Spyder
41-151A
Pair
$
99.95
NEW Floorboard Kit for Can Am Spyder RT
110
Add Big Bike Parts® Vantage Highway Boards for a custom driver mount to replace those uncomfortable pegs. The mount replaces the OEM peg mount with a solid cast tapered block with our anti-rotation system designed right in. Matched with our Vantage Boards for an elegant look and superior fit and finish. The Vantage Boards are CNC Aluminum, finished in brilliant chrome with raised rubber comfort pads. The boards measure a comfortable 6-1/4” x 4”. For Can Am RT electronic shift.
NEW Saddlebag Scuff Pads
Fitment
Part No. Unit
MSRP
Fitment
Part No.
Unit
MSRP
Can Am Spyder RT SE5
41-154
279.95
Can Am Spyder RT
41-153
Pair
$
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Pair
$
These unique Saddlebag Scuff Pads will protect saddlebags from some unintentional passenger scuffs with a soft carbon fiber look. The embedded carbon fiber pattern is covered in a soft resin gloss to not only look good but be functional. Comes as set of 4 for the Can Am Spyder RT. Pads measure 6-1/2” x 3-1/2” at the widest. Special adhesive backing provides durable adhesion in all elements.
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
65.95
AUDIO
CAN AM SPYDER
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS
Part No.
Unit
MSRP
Can Am Spyder RT
H41TPC-2BK
Pair
$
44.95
®
This latest UltraGard® cover is custom fitted around the Can Am Spyder RT for a great tailored fit. UltraGard® strength and durability comes from its strong double stitched folded and interlocking seams with specially dyed and woven polyester fabric with a water resistant polyurethane coating applied. An expandable windshield pocket protects your windshield from scratches with UltraGard® own Softek™ liner. An elastic hem with 2 bungees attached to rust proof grommets allow additional adjustments to keep a snug fit. Includes high visibility reflective piping and logo to allow your covered Spyder RT to be seen in dark parking lots. Part No.
Unit
MSRP
Can Am Spyder RT
4-475BC
Each
$
79.95
HCTL
CAN AM ACCESSORIES
Fitment
TOURING ACCESSORIES
Fitment
NEW UltraGard Cover
CRUISER ACCESSORIES
Hopnel™ introduces a new Premium Double Tank Pouch for the Can Am RT that slips over the glove box door. Its felt lined back panel avoids scratches to the finish and the double pouch design with UV stabilized clear face allows access to cell phone screens or GPS display. The large main pocket is zippered and measures 5-1/4”W x 7”H x 1-1/2”D, with the clear pouch measuring 3-1/2”W x 6”H x 1”D.
WINDSHIELDS
NEW Deluxe Premium Double Tank Pouch
AT V ACCESSORIES
Part No.
Can Am Spyder RT
41-156
Unit Set of 3
MSRP 14.95
$
The HopnelTM Saddlebag Liners are built to last, the liners are designed to make loading and unloading a breeze and are made of sturdy urethane coated weather resistant polyester. The 2 piece trunk set comes with a smaller compact liner to fit in the lower trunk which is ideal for tools and maintenance supplies that stay in the bag and a larger upper liner that fills the upper portion of the trunk. Fitment
Part No.
Unit
850 Saddlebag Liner. Can Am Spyder RT
HCSL
Each
$
1100 Trunk Liners. Can Am Spyder RT
HCTL
Pair
$
www.bigbikeparts.com
•
MSRP 19.95
E-mail us info@bigbikeparts.com
24.95
111
GENERAL ACCESSORIES
Fitment
NEW Saddlebag and Trunk Luggage for Can Am
LIGHTING
Big Bike Parts introduces an easy and inexpensive Saddlebag and Trunk Lid Net Organizer for the Can Am Spyder RT. These nets easily hold rain gear, covers or other items in the lid recess with a bungee net system. Small durable nylon clips mount to existing screws and clip the net into place with simple ‘S’ hooks, allowing easy access and removal. ®
LICENSE PLATE ACCESSORIES
NEW Saddlebag & Trunk Lid Organizers
FLAGS & FLAG POLE MOUNTS
HCSL
PRAIRIE DOG® ATV ACCESSORIES
ATV Accessories 17-990
17-991
ATV Transportor Cover TM
ATV Heated Grips & Thumb Warmers Five position switch Hi/Med-Hi/Med/Lo/Off For 7/8” inside diameter, 5” inside length bars. For ATV/Snow 7/8” x 5” & 7/8” x 5”. The ATV Thumb Warmer can be used with ATV/ Snowmobile Heated Grips (17-990) or splice into any existing heated grip set. The thumb warmer delivers a comfortable temperature to keep your throttle thumb toasty. Also sold as a kit. Description
Part No.
Unit
MSRP
ATV Heated Grips
17-990
Pair
$
ATV Thumb Warmer
17-991
Each
$
ATV Grips With Thumb Warmer
17-992
Kit
$
Polyurethane coated polyester. Trailerable cover and storage cover. Six reinforced tie down slots. Exclusive front cut-out for most snowplow and winch attachments. Three year warranty. Measures 47” W x 82” L x 46” H. Description ATV Transportor Cover TM
Part No.
Unit
MSRP
4-890G
Each
$
99.95
74.95 19.95
84.95
Rally Brush Guards These aluminum reinforced Brush Guards protect hands from trees and brush while riding. Packaged as a pair; all required installation hardware is included. Fits most ATV’s with exposed handlebars. Dimension 13”L x 6”W x 3-1/2”H.
ATV Ball/Pin Extension
Description
Part No.
Unit
MSRP
Black
59-202
Pair
$
59.95
Olive Green
59-201
Pair
$
59.95
Finger Visor Wipers
Multi Colors
112
59-105
Unit 3 pk.
Part No.
Unit
Black
59-101
Set
MSRP $
39.95
In the case of broken or lost OEM rivets we now offer replacement Large Reusable Rivets for ATV’s. Packaged as a pack of 10. Fits ATV mud flaps, etc.
MSRP 9.95
$
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Description
Large Reusable Rivets
These handy wipers are worn on the rider’s finger or thumb for quick and easy removal of water or mud drops on the visor. Fits easily over most riding gloves. Sold as a pack of three in colors of red, blue and black. Description Part No.
A combination ball mount for pulling trailers and a pin hitch hole for wagons, spreaders, plows, etc. This extension, a rugged and durable construction, is finished with a shiny black powder coat for added protection. Measures 2” W by 8-1/2” L. It mounts to the existing hitch on most ATV’s. Comes complete with hardware for mounting (does not include the ball). Maximum recommended trailer weight 1,200 lb. and tongue weight 100 lb.
•
Description
Part No.
Unit
Large Reusable Rivets
3-108
10 pk.
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP $
6.95
PEGS, BOARDS & GRIPS
Flags & Flag Pole Mounts
AUDIO
NATIONAL/POW FLAGS + MOUNTS
COVERS LUGGAGE & BAGS WINDSHIELDS CRUISER ACCESSORIES
Flags Flags are 6” x 9” double sided and made of heavy duty polyester. Fits 3/8” pole and comes with O-ring. Part No.
Unit
American Flag
4-240US
Each
MSRP $
6.95
Canadian Flag
4-240CN
Each
$
6.95
French Flag (measures 5-1/2” x 8”)
4-240FR
Each
$
6.95
POW-MIA Flag
4-240POW Each
$
6.95
Flag & Pole Mount Description
Part No.
Flag & Pole Mount
52-729
Replacement Acorn Nut
952713C
Unit Kit
MSRP $
89.95 7.95
Each
$
AT V ACCESSORIES
Part No. Unit MSRP
Flag & Eagle Topped Pole Mount
4-248
Kit
$
29.95
Part No.
Flag Pole Mount with American Flag
52-713
Kit
$
89.95
Flag Pole Mount with Canadian Flag
52-719
Kit
$
89.95
Flag Pole Mount with French Flag
52-813
Kit
$
89.95
Replacement Acorn Nut
952713C
www.bigbikeparts.com
•
Unit
Each
E-mail us info@bigbikeparts.com
MSRP
7.95
$
113
GENERAL ACCESSORIES
Description
Description
LIGHTING
52-713
13” Flag Pole clamps to any 1/2” tube such as a rack or rail. Item comes complete with heavy duty polyester 6” x 9” flag and O-rings to keep flag in place. Flag pole does not fold down.
LICENSE PLATE ACCESSORIES
Die-cast chrome plated mount & pole mounts to the antenna. The 13” fold down pole feature makes putting on bike covers an ease. The flag is 6” x 9” double sided and made of heavy duty polyester. Fits Honda Gold Wings.
FLAGS & FLAG POLE MOUNTS
Fold Down Pole Mount & Flag
Flag & Eagle Topped Pole Mount
CAN AM ACCESSORIES
Die-cast chrome plated mount & 1/2” round flag pole attaches with clamps to any 1/2” tube like luggage racks. The kit includes a 6” x 9” double sided American flag, made of heavy duty polyester. The flag and pole mount has a 13” folding pole feature for putting on bike covers.
TOURING ACCESSORIES
Description
HOLDERS + BRACKETS
License Plate Accessories
Raised License Plate Holder With LEDs Chrome plated ABS Dual Function Raised License Plate Holder with 8 bright red LEDs used for running and brake lights and 4 white LEDs to illuminate the license plate. All necessary mounting hardware and electronic hook ups included. Fits standard 7” x 4” motorcycle plates.
LED License Plate Holder Chromed plated ABS Multi Functional LED License Plate Holder for standard 7” x 4” plates. Frame acts as a running light, brake light and turn signals. Fitment
Part No.
Unit
MSRP
7” x 4”
16-131
Each
$
Fitment
Part No.
Unit
MSRP
7” x 4”
16-132
Each
$
69.95
69.95
License Plate Holder Chrome steel frame with acrylic plate cover and stainless steel back plate. Small size plate holder is 7-3/4” x 4-1/2”.
LED License Plate Holder Accommodates 7” x 4” to 8-1/2” x 4-3/8” plate size. Die-cast chrome plated holder incorporates 3 LED light strips. The top has 8 red LED’s and can be used as auxiliary running or brake light. The two side amber lights have 4 LEDs each can be used as auxiliary turn signals. Mounts to most license plate holders. Outer frame measures 9-1/8” L x 5-1/8” H x 3/4” D with a 1” width border. Clear acrylic front panel to protect license plate. Fitment
Part No.
Unit
7” x 4” to 8-1/2” x 4-3/8”
52-692
Set
Amber Replacement
10-2692A
Each
Red Replacement
10-2692R
Each
114
•
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Description
Part No.
Unit
7-3/4” x 4-1/2”
3-2
Set
MSRP 109.95
$
7.95
$
11.95
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP $
39.95
4-253
PEGS, BOARDS & GRIPS
16-133A
AUDIO
HOLDERS + BRACKETS
COVERS LUGGAGE & BAGS
4-254
WINDSHIELDS
16-133R
License Plate Trims are built using durable chromed ABS for a high luster. Description
Part No.
Unit
MSRP
4-254
Each
$
Motorcycle (7” x 4”)
4-253
Each
$
24.95
Description
Part No.
Unit
MSRP
Amber (7” x 4”)
16-133A
Kit
$
Red (7” x 4”)
16-133R
Kit
$
199.95 199.95
CAN AM ACCESSORIES
Auto (12” x 6”)
Raised License Plate Holder with amber or red LED Turn Signal Lights. When replacing incandescent turn signals with LEDs a Dual Load Equalizer is required (13-304A). Fits standard 7” x 4” motorcycle plates.
19.95
Euro License Plate Trim
Unit
MSRP
4-256
Each
$
22.95
179 mm x 239 mm (Britain)
4-257
Each
$
22.95
FLAGS & FLAG POLE MOUNTS
Part No.
142 mm x 213 mm (France)
AT V ACCESSORIES
Euro License Plate Trim for France or Britain was built using durable chromed ABS for a long lasting high luster. Fits standard 142 mm x 213 mm motorcycle plates Description
Part No.
Unit
MSRP
Kawasaki VN2000 2004-2010
71-129
Each
$
34.95
Fitment
Part No. Unit MSRP
Honda VTX1300 R/S 2003-2009 & VTX1800 R/S/T 2002-2008
55-123
Each
$
32.95
www.bigbikeparts.com
GENERAL ACCESSORIES
Fitment
Die-cast chrome license plate mounting bracket to hold any size license plate. Mounts to the license plate light bracket with existing screws. Replaces the OEM large black license plate holder.
LIGHTING
This bracket relocates the Kawasaki VN2000 license plate to under the rear turn signals for a clean and custom look. Required for mounting Sissy Bar Luggage Rack (55-322) to Sissy Bar Kit (71-130).
LICENSE PLATE ACCESSORIES
License Plate Holder Mount License Plate Relocation Bracket
TOURING ACCESSORIES
License Plate Trims
CRUISER ACCESSORIES
License Plate Holder With LED Turn Signals
•
E-mail us info@bigbikeparts.com
115
MARKER LIGHTS + ACCESSORIES
Lighting Pole Marker Lights Chrome plated 12 volt pole marker light with illuminated multi-colored collar and solid color crown. Whip style base reduces snap off problem. Chrome finished mounting bracket included. Measures 16” from crown to base.
16-6RT
16-6R
Description
Part No. Unit
MSRP
Pole with Amber Crown
16-6A
Each
$
22.95
Pole with Red Crown
16-6R
Each
$
22.95
Replacement Amber Crown
16-6AT
Each
$
2.95
Replacement Red Crown
16-6RT
Each
$
2.95
Running Light 16-120A
16-123B
16-121R
Mini LED Accent Lights
These Mini LED Accent Lights can be mounted in any desired location for added safety or just an added accent color. Mini LED Accent Lights contain 7 mini LEDs. The lights feature bright chrome housing with a domed clear lens and mount with double sided tape provided. Accent Lights measure 1-1/2” L x 1” W x 1/4” H and run on 12 Volts. Switch is not provided. Description
Part No.
Unit
MSRP
Amber
16-120A
Each
$
Blue
16-123B
Each
$
Red
16-121R
Each
$
Chrome beveled 12 volt running light. Grounding wire included. Add our 2-223 chrome grilles for a custom touch. Description
Part No.
Unit
Amber Lens Only
16-5AL
Each
MSRP $
2.95
12.95 12.95 12.95
LED Marker Lights These marker lights replace the reflectors found on Honda GL1800 Gold Wing, Cruisers and Yamaha Cruisers. Measure 1-1/4” x 3-1/2”. These lights greatly enhance visibility by incorporating 15 mini high visibility LEDs. Mounts with double sided adhesive to replace both tape and screw mounted reflectors.
116
Clear Lens LED Marker Lights Dimension 3-1/2”L x 1-1/4”W x 1/2”H.
16-107A
Description
Part No.
Unit
MSRP
Amber
16-107A
Pair
$
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
59.95
Fitment
Part No.
Unit
MSRP
Clear Lens Amber
16-117A
Pair
$
Replacement Clear Lens
16-117CL
Each
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
59.95 $
3.95
AUDIO
MARKER LIGHTS + ACCESSORIES
PEGS, BOARDS & GRIPS
3-1/2” Halogen Spot Light
COVERS
Visored 55 Watt Halogen Spot Light. Universal M8 stud mount. Part No. Unit
3-1⁄2” 55W Halogen Spot Light
16-35A
Each
MSRP $
Replacement Lense for 16-35A
16-35L
Each
$
LUGGAGE & BAGS
Description
69.95
10.95
WINDSHIELDS
Mini Halogen Driving Lights
Part No.
Unit
MSRP
Smooth Bullet
16-104A
Each
$
Replacement Bulb
10-1624
Each
$
Replacement Lens
16-104L
Each
This visored 3-1/2” LED Spot Light brings LED technology and LED brightness to the motorcycle market. This compact DOT approved LED light comes with built in visor and universal M8 mounting stud to fit most light bars. You can easily replace your older style 4-1/2” Halogens with this cutting edge design LED Spot Light.
59.95
10.95 $
3.95
16-104A
Description
Part No. Unit MSRP
3-1/2” LED Spot Light
16-37
Each $169.95
TOURING ACCESSORIES
Description
3-1/2” LED Spot Light
CRUISER ACCESSORIES
Die-cast bullet driving lights with 50 watt, 12 volt halogen bulb. Has its own visor built in the bezel. Set screw bezeling allows for complete rotation of the visor. Light is 3-3/4” long with a diameter of 2-3/8”. 8mm threaded stem.
CAN AM ACCESSORIES AT V ACCESSORIES FLAGS & FLAG POLE MOUNTS
Amber Eagle Eye Turn Signal Chrome Eagle Eye LED has a M8-1.25 x 35mm L mounting stud. Each Turn Signal contains 34 LEDs. Part No.
Unit
Large Eagle Eye - Measures 1-5/8” x 4-5/8” L
16-114A
Pair
$
MSRP
Medium Eagle Eye - Measures 1-1/4” x 3-5/8” L
16-113A
Pair
$
LICENSE PLATE ACCESSORIES
Description
145.95 119.95
LED Torpedo Turnsignal
The signal consists of three short light pulses, followed by one long pulse. (Cycle time approximately 6 seconds.) NOTE: Check your local laws for legality. Universal use. Part No.
Unit
MSRP
Brake Light Annunciator Module
2-356
Each
$
45.95
Description
Part No.
Unit
MSRP
LED Torpedo Turnsignals
16-118A
Pair
$
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
89.95
117
GENERAL ACCESSORIES
Description
This pair of amber LED Torpedo Turnsignals is a great custom look for your cruiser or chopper. These bright LED Turnsignals are E-Mark approved and mount easily with a universal M8 threaded stem. Light measures 1-1/8” diameter by 3-1/8” long. Use with a load equalizer.
LIGHTING
Brake Light Annunciator Module
MARKER LIGHTS + ACCESSORIES
Lighting Quad Load Equalizer This Quad Load Equalizer is designed to allow for use of LED turn signals in place of incandescent turn signals. When replacing front and rear incandescent lights with LED’s you will notice a fast flash rate that will be reduced to a stock flash rate when utilizing this part. Does not require replacement of the stock flasher module. Item splices into existing turn signal system.
16-111A 16-111R
Fitment
Part No.
Unit
MSRP
Harley-Davidson, Honda, Kawasaki, Suzuki, & Yamaha
13-314
Each
$
39.95
Dual Load Equalizer
Starburst LED Marker Lights These chrome finished lights can be used as marker lightsor turn signal lights. Mount with M8 x 1.25” x 35mm long mounting stud. Small (1-5/8” x 2-1/2” long) size allows the ability to mount anywhere on bike. Each marker light contains 20 mini LED’s. Comes in two colors red and amber. Requires Dual Load Equalizer (13-304A) or LED Digital Flasher Relay (13-306) when using as turn signals. Fitment
Part No.
Unit
Amber Light
16-111A
Pair
$
MSRP
Red Light
16-111R
Pair
$
119.95 119.95
Unit
MSRP
Each
$
Unit
MSRP
Each
$
29.95
LED Flasher Relay LED flasher Relay is used when replacing incandescent turn signals with LED turn signals. This unit slows fast flash rate when replacing incandescent Part No. front and/or rear turn signals 13-306 with LED’s. Plug ‘n’ Go.
25.95
LED Dual Conversion Harness
Diamond Marker Light
This LED cross feed prevention harness is for bikes with a “single turn signal indicator” that have replaced incandescent turn signals with LED’s. This unit prevents cross feeding through the indicator light that makes your bike function as if four ways are active while utilizing either right or left and turn signals. Item splices into existing wires coming from indicator light.
Show Chrome finish die-cast diamond light includes a diamond shaped lens with a tapered face allowing better side visibility. Back has a 1 ⁄4” mounting stud for a clean mounting. Approximately 1-7/8” x 2” x 1-3/8”. Description
Part No.
Unit
MSRP
Amber Light
16-18A
Each
$
22.95
Marker Lights Chrome finish 12 volt marker lights. Bottom mount design allows for forward, left, right or upside down mounting to any location where a neat marker light will add that special touch. Small (2” x 1”) size with red or amber lens.
13-308
Description
Part No.
Unit
LED Dual Conversion Harness
13-307
Each
MSRP $
8.95
LED Cross Feed
13-308
Each
$
8.95
Trailer Wire Harness
Description
Part No.
Unit
MSRP
Light with Amber Lens
16-4
Each
$
Replacement Amber Lens
16-4L
Each
$
Replacement Red Lens
16-2L
Each
$
118
This Dual Load Equalizer is designed to allow for use of LED turn signals in place of incandescent turn signals. When replacing front or rear incandescent lights with LED’s you will notice a fast flash rate that will be reduced to a stock flash rate when utilizing this part. Does not require rePart No. placement of the stock flasher module. Item 13-304A splices into existing turn signal system.
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
16.95 1.95 1.95
Trailer wiring becomes a snap using this wire harness for Honda Valkyrie models. The harness comes with connectors that install quickly using only a pliers. The wires also come color coded to allow for quick reference to trailer connections. Fitment
Part No.
Unit
MSRP
Honda Valkyrie
51-344
Each
$
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
14.95
10-102
10-1156AL
10-204
10-2443
10-2595
10-2603
10-6105
10-7443A
10-7443C
10-7443R
10-1156RL
10-1157AL
10-2604
10-1157RL
10-1443AL
10-1443RL
10-1624
10-166
10-281
10-282
10-295
10-351
10-510
COVERS
10-101
PEGS, BOARDS & GRIPS
10-100
AUDIO
LIGHT BULBS + ACCESSORIES
10-8355
10-8455
10-8755
16-30
16-26 (left)
LUGGAGE & BAGS
(right)
16-28
Fitment Chart Watts
Base Type
Filament
1141
S-8
12
18
Single Contact Bayonet
C-6
2 pack
$
192
T3-1/4
13
5
Wedge
C-2V Supported
10 pack
$
1176
S-8
12
18/8
Double Contact Bayonet
C-6
Each
$
1156
18 Amber LEDs
Each
$16.95
1156
18 Red LEDs
Each
$16.95
1157
18 Amber LEDs
Each
$16.95
1157
18 Red LEDs
Each
$16.95
7443
18 Amber LEDs
Each
$16.95
7443
18 Red LEDs
Each
$16.95
EXT
Halogen MR-16
12
50
Bi-Pin
C-6
2-542, 16-104, 52-757
Each
$
1487
T3-1/2
14
3
Miniature Screw
C-2R
16-6
10 pack
$
1157
S-8
12
32/3
Double Contact Index
C-6
2-204, 2-350
Pair
$
2.95
1157
10 Red LEDs
14
Double Contact Bayonet
Each
$
8.95
7443
Red LED
12
Wedge
Each
$
Halogen
12
18/18
Each
$
6.95 3.95
01031
2.95 7.95
1.95
10.95 10.95
9.95
C-6/C-6
52-595 52-603
Pair
$
C-6
52-604, 52-704, & 52-804 Fog Light Kits
Each
$
T-2
12
1.8
Fuse
H3 T3-1/2
12
35
PK22s
LED
12
Wire Lead
52-624
Pair
$
LED
12
Wire Lead
52-624A
Pair
$
LED Strip
12
Wire Lead
52-701P/52-731P Trunk Corner
Each
$
LED Strip
12
Wire Lead
52-701P/52-731P Trunk Center
Each
$
LED Strip
12
Wire Lead
52-702/52-732 Saddlebag Corner
Each
$
24.95
Wire Lead
52-702/52-732 Saddlebag Door
Each
$
24.95
LED Strip
7.95
145.95 119.95 24.95 29.95
192
T3-1/4
12
3
Wedge
C-2V
2-486, 2-524, 2-281
10 pack
$
70
T1-3/4
14
3
Miniature
C-2V
2-282, 61-100
10 pack
$
6235J
RP-11
12
35/35
DC Pre Focus
C-2V
2-295, 52-571
Each
$
10/10
Double Contact Bayonet
S-8
9.95 9.95
3.95
2 pack
$
2.95
1.95
8.95
1156NA
S-8
12
26
Single Contact Bayonet
C-6
2-510
Each
$
FTC/SU
Halogen MR-11
12
20
Bi-Pin GZ4
C-6
16-105
Each
$
7443
Amber Bulb
Wedge, Glass base
Each
$
7443
Clear Bulb
Wedge, Glass base
Pair
$
7443
Red Bulb
Wedge
Each
$
7.95
6.95 7.95
12
35
PK22s
C-6
52-604, 52-704, 52-804, 52-904
Each
$
H-3
12
55
Pk22s
C-6
16-23, 16-25, 16-35A
Each
$
H-4
12
60/55
P43T
C-8/C-8
Each
$
H-7
12
55
PX26D
C-8
Each
$
Replacement Switch
12
$
Replacement Switch Replacement Relay
125
7.95 7.95 7.95
Pin
2-316
Each
Pin
Fits all BBP Cruiser Bar Lights
Each
$
2.95
Pin
52-605 (requires soldering)
Each
$
4.95
Pin
Fits all BBP Cruiser Bar Lights
Each
$
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
2.95
6.95
119
GENERAL ACCESSORIES
Replacement Switch
7.95 LIGHTING
H-3
LICENSE PLATE ACCESSORIES
16-30
MSRP
FLAGS & FLAG POLE MOUNTS
10-2703P 10-281 10-282 10-295 10-351 10-510 10-6105 10-7443A 10-7443C 10-7443R 10-8335 10-8355 10-8455 10-8755 16-26 16-28 16-29
Unit
AT V ACCESSORIES
10-2624 10-2624A 10-2700P 10-2701P 10-2702P
Double Contact Bayonet
BBP Part # Bulb Fits
CAN AM ACCESSORIES
Volts
TOURING ACCESSORIES
Bulb Type (Cross-Ref #)
CRUISER ACCESSORIES
10-100 10-101 10-102 10-1156AL 10-1156RL 10-1157AL 10-1157RL 10-1443AL 10-1443RL 10-1624 10-166 10-204 10-2157R 10-2443R 10-2595 10-2603 10-2604
Lamp #
WINDSHIELDS
Item
T I R E G A R D TM
General Accessories TireGard Silicon Protective Skin
TM
This Silicon Protective Skin is specifically designed for all TireGardTM Tire Pressure Monitoring System monitors. The Silicon Skin helps protect your monitor from wear and tear, dropage and water. Comes in a universal charcoal color. Monitor Sold Separately.
Handlebar Mount Tire Pressure Monitoring System
Fitment
This all new design incorporates a large 1-5/8 x 1-1/8” LCD display screen mounted in a slim 2-7/16” x 2-5/8” x 3/4” monitor. Easily mounts to the handlebars or face mounted to the brake cylinder clamp. Fits on 7/8”, 1”, or 1-1/8” handlebars. The monitor slides in or out of the mount to allow quick removal. The lightweight, 1/3 ounce sensors feature the latest technology in external sensors on the market and are water resistant. Tire Pressure Monitoring Systems (TPMS) are a proven way to increase fuel efficiency and extend tire life. No tire rebalancing required and each sensor comes with a patented anti-theft ring to prevent theft. Includes instruction manual, all batteries, and a silicone protective skin for the monitor. Fitment
Part No.
Unit
TireGardTM Handlebar Mount Wireless Tire Pressure Monitoring System
13-318
Each
$
Part No.
Unit
MSRP
Fits All TireGardTM Monitors 13-315PS Each
$
4.95
4-212
MSRP
Valve Stems Cover
239.95
Valve covers make the perfect finishing touch to any street cruiser. These Show Chrome finish valve covers are available in the popular eagle head design or ribbed design.
13-316A
Fitment
Part No.
Unit
Ribbed Stems
4-212
Pair
MSRP 9.95
$
Air Supply Hose This 10 foot nylon hose easily fills tires on motorcycles, trailers or other vehicles. Comes standard with quick release connector.
13-315A
13-317A
TireGard Tire Pressure Monitoring System TM
TireGard™ TPMS are designed specifically to support 2 wheel bike, 3 wheel bike and 4 wheel bike with trailer monitoring to maximize your riding safety. Completely wireless real time information changes from lightweight all weather sensors. Installs in less than 3 minutes and tire removal is not required. One year warranty, batteries included, no tools required. Does not require tire rebalancing.
MSRP
Each
$
10.95
Air Pressure Gauge
199.95
Fitment
Part No.
Unit MSRP
279.95
Air Pressure Gauge
4-220
Each
Unit
13-315A
Each
$
TireGardTM Bike Tire Pressure Monitoring System External Sensors (3 Wheel)
13-316A
Each
$
TireGardTM Bike and Trailer Tire Pressure Monitoring System External Sensors (4 Wheel) 13-317A
Each
$
•
Unit
2-340
179.95
Part No.
TireGardTM Bike Tire Pressure Monitoring System External Sensors (2 Wheel)
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Part No.
Air Supply Hose
A necessary item to keep your tires performing best. This economical gauge measures 0 to 50 psi.
Fitment
120
Fitment
MSRP
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
$
2.95
AUDIO
O I L F I LT E R S + V O LT M E T E R S
PEGS, BOARDS & GRIPS COVERS
Filter Wrench
Fitment
Part No. Unit MSRP Each
12.95
$
Unit
MSRP
4-239
Each
$
32.95
Unit
MSRP
Chrome LED Volt Meter
13-303
Each
$
54.95
$
25.95
Oil Filter
Big Bike Parts Oil Filter is designed for the rigors of powersports. Our Oil filter features a warranty against defects in materials and manufacturing. See Oil Filter Fitment Chart. Fitment
Part No.
Unit
2.5”D x 2.5”H
5-108
Each
OIL FILTER FITMENT CHART Make Fitment
Make
Fitment
Honda
15410-MM5-003 KAWASAKI
160 970 002
Make ARCTIC CAT
320-1044
15410-MM9-003
160 970 003
15410-MM9-013
160 970 004
fram
PH-6017A
15410-MM9-305
160 971 054
15410-MM9-405
160 971 055
15410-MM9-P00
160 971 058
15410-MM9-P01
160 971 059
15410-MM9-P03
160 971 061
15410-MT7-003
160 971 063
15410-MC5-003
160 971 064
15412-MT7-003
160 971 066
15143-MY1-003
160 971 067
15410-MCJ-000
160 971 068
15410-MCJ-003
160 971 070
15410-MCT-003
160 971 072
MSRP $
5.95
Fitment
PH-6607 EMGO
10-82230 10-82240 10-82251
k&n
KN-204 KN-303
POLARIS
254 0086 308 4963 308 9996
TRIUMPH
T121 0200 T121 0444
YANMAR
124450-35100
15410-MFJ-D01 www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
121
GENERAL ACCESSORIES
Part No.
Each
LIGHTING
Fitment
5-601
LICENSE PLATE ACCESSORIES
Chrome LED Volt Meter features 10 LEDs in 5 different colors to show voltage draw. Meter measures in 1/2 volt stages from an 11 to 15 volt range. Chrome unit measures 2–1/4” x 1” x 1/2” deep. Attaches with double sided tape.
GL1500/6 Goldwing 1988-2000
FLAGS & FLAG POLE MOUNTS
Chrome LED Volt Meter
MSRP
AT V ACCESSORIES
Part No.
Digital 5 Function Volt Meter
Unit
CAN AM ACCESSORIES
Fitment
Part No.
TOURING ACCESSORIES
Includes voltage monitoring from 11 to 16 volts with thermometer, ice alert, clock, stop watch and lap counter. Dimension 5 5/8”L x 1”H x 3/4”W.
Fitment
CRUISER ACCESSORIES
Digital 5 Function Volt Meter
Big Bike Parts® has an alternative to replacing the entire fuel petcock assembly when your GL1500 Goldwing decides to start leaking fuel. It is a lot less expensive to change the rubber diaphragms that have most likely given way due to age. Our new Fuel Petcock Service Kit allows you to replace the Sealing Diaphragm, the Actuator Diaphragm, Compression Spring, Screws and Washers with all new components. For 1988- 2000 GL1500/6 Goldwing.
WINDSHIELDS
Fits most 2-1⁄2” oil filters for GL1500, 4-201 GL1800, ST1100, VTX, VT750, VT1300 & etc. 2-1⁄2” Filter Wrench
NEW Fuel Petcock Service Kit
LUGGAGE & BAGS
This ultra-thin wrench allows oil filter removal without having to remove fairing pieces just to attach it. No moving parts in this design. Requires no adjustments to fit your oil filter.
RIVETS & GROMMETS
General Accessories Low Profile Plastic Rivets Low Profile Rivets for replacement of OEM on inside of fairings. Fitment
Part No. Unit MSRP
Honda GL1800 2001-2010
3-106
10 pk.
$
6.95
High Reflective Red Tape This High Reflective Red Tape is 1-7/16” x 9” with adhesive backing, great for use on trailer or anything you want to make more visible.
Plastic Rivets
Re-usable Plastic Rivets for replacement of OEM rivets used on inside of fairings. Fitment
10 pk.
$
MSRP $
8.95
Allen Head Cap Plugs Fit 1 ⁄4” hex. Sold as a 10 pack.
The five piece Replacement Grommet set, matches the stock OEM. The set includes: two ovals, two rounds and one slotted. Fitment
Part No. Unit MSRP
Honda GL1800
52-691
5 pk.
$
4.95
Double Sided Tape
Apply new, fix loose or replace old tape applications using this roll of double-sided tape. Tape comes in 6.5 ft. rolls at 3mm wide. Part No.
Unit
4-214
Each
•
Pair
6.95
Replacement Grommets
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Unit
952543T
Part No. Unit MSRP
Honda 3-104 GL1800 2001-2010
122
Part No.
MSRP 9.95
$
Part No.
Unit
3-101
10 pk.
MSRP $
5.95
3-110
Dual Lock Fasteners
TM
These clear 3M Dual Lock™ Fasteners measure 5/8” and 1/2” in diameter. They can be used anywhere on a bike where you want something to securely attach. Comes as 10 pairs of Dual Lock™ Fasteners.
3-109
Description
Part No.
Unit MSRP
Dual LockTM Fasteners 5/8” diameter
3-110
20pk.
$
8.95
NEW Dual LockTM Fasteners 1/2” diameter 3-109
20pk.
$
8.95
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
AUDIO
DECORATIVE CAPS + EMBLEMS + ACCENTS
PEGS, BOARDS & GRIPS COVERS
3-60/10
3-70/10
LUGGAGE & BAGS
Decorative Show Caps Mirror-like Show Caps to protect and conceal unsightly exposed fasteners. Quick fitting cap and washer easily snap together for a corrosion-proof seal. Show Chrome or gold electro-plated finish. Available on display cards or in bulk for extra savings. Finish
Quantity
2/4
Chrome
10/Card
MSRP
3-50/100
2/4
Chrome
100/Bulk
3-60/10
6/8
Chrome
10/Card
3-60/100
6/8
Chrome
100/Bulk
3-61/10
6/8
Gold
10/Card
$
6.95
3-70/10
10/12
Chrome
10/Card
$
6.95
3-70/100
10/12
Chrome
100/Bulk
$ $
$ $
$
6.95
64.95 6.95
64.95
64.95
Embossed Dimensional Emblems Description
Part No.
Unit
MSRP
3” Wide Wing design (gold)
2-8
Each
6 1/2” Screaming Eagle Emblem only (gold)
2-82
Each
3” V45 Eagle design (gold)
2-90
Each
$
2.95
2” V700 Eagle design (gold)
2-96A
Each
$
2.95
4” V45 Wing design (gold)
2-97
Each
$
2.95
$ $
5.95
29.95
CRUISER ACCESSORIES
Size
3-50/10
WINDSHIELDS
Part No.
TOURING ACCESSORIES CAN AM ACCESSORIES AT V ACCESSORIES
Mount easily with double adhesive tape.
Star Washers
Description
Part No.
Unit
Description
Part No.
Unit
3-1/4” flame
53-103
Pair
$
Star Washers
4-231
10 pk.
6” flame
53-106A
Pair
$
8” flame
53-108A
Pair
$
Description
Part No.
Unit
Chrome Cable Covering
4-230
5 ft.
MSRP 9.95
$
19.95
39.95 49.95
Decorative Edge Guard Easy to install edge guard to add further distinction to your motorcycle. Comes in a 20’ length. Description
Part No.
Chrome Edge Guard 900251EC
www.bigbikeparts.com
•
Unit
MSRP
20 ft.
$
GENERAL ACCESSORIES
This spiral chrome cover is 3/16” in diameter allowing it to hide most electrical accessory lighting wiring in chrome. Sold in 5’ lengths.
19.95
$
LIGHTING
Chrome Cable Covering
MSRP
MSRP
20.95
E-mail us info@bigbikeparts.com
LICENSE PLATE ACCESSORIES
1 ⁄4” hole, 1-1/4” O.D.
FLAGS & FLAG POLE MOUNTS
Chrome Flame Accents
123
T I E - D O W N S T R A P S + T R A I L E R D E A D B O LT + K I C K S TA N D P L AT E S
General Accessories
Soft-Tie Nylon Tie-Down Straps These 18” long looped nylon tie-down straps are rated 3,500 lb. assembled strength. Description
Part No.
Unit
Soft-Tie Nylon Tie-Down Straps
4-238
Pair
Trailer Dead Bolts MSRP $
4.95
Extra security for trailers! 1 ⁄ 2” dead bolt hitch lock comes with their own pair of keys for quick unlocking. Made in USA. Description
Part No.
Unit
MSRP
1/2” Dead Bolt Hitch Lock
4-222
Each
$
19.95
Safety Tags ‘Not Safe to Ride’ tag is designed to be used when maintenance is being performed. The mechanics safety flag is made with a durable, hi-visibility red polyester web which is stain and fade resistant for years of trusted use. The mechanics safety flag is a low cost reminder that could potentially save you hundreds of dollars in unnecessary repairs.
Rubber Kickstand Foot Helps prevent bikes from tipping over when standing on hot asphalt.
Description
Part No.
Unit
Safety Tags
4-255
Each
MSRP $
3.95
Description
Part No.
Unit
Rubber Kickstand Foot
4-235
Each
MSRP $
8.95
Reorder Hang Tags Keep Show Chrome Accessories® items in stock and organized while making it easier for customers to shop. These Reorder Hang Tags make it easy for dealerships to be aware of what needs to be ordered and let the consumers know what item is on the way. Reorder Hang Tags come in packs of 50.
124
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Description
Part No.
Unit
Reorder Hang Tags
SC119C
50 pk.
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
MSRP $
3.95
AUDIO
RAIN GATORS + BEVERAGE BUTLER + SPLASH GUARD + ACCESSORIES
PEGS, BOARDS & GRIPS COVERS LUGGAGE & BAGS WINDSHIELDS CRUISER ACCESSORIES
Beverage Butler
Part No. Unit
MSRP
Beverage Butler Universal 20 oz
4-232S
Each
$
Mounts to GL1500/1800 armrest mounts Passenger 20 oz
4-233S
Each
$
Replacement Mug 20 oz
4-232SB Each
$
79.95 79.95
29.95
Rain Gators Description
Part No.
Unit
MSRP
Rain Gators
RG200
Pair
$
29.95
FLAGS & FLAG POLE MOUNTS LICENSE PLATE ACCESSORIES
Rubber Splashguard Embossed Wing emblem included. Dimension 10 1/4”L x 8”H x 1/4”W.
Motorcycle Kickstand Disk
Fitment
Part No. Unit MSRP
Rubber Splashguard 2-111
Kit
$
29.95 LIGHTING
Part No.
Motorcycle Kickstand Disk 4-249
Unit
MSRP
Each
$
GENERAL ACCESSORIES
Helps stabilize ground under kickstand to prevent bike from tipping over. Made of aluminum and measures 5 inches across. Convenient hole in disk to allow string to attach. Description
AT V ACCESSORIES
Hopnel’s redesigned compact, easy to wear Rain Gators incorporate water resistant nylon, heat shields to prevent melting, and non-slip boot and toe shift pads. The calf area has anti-billowing elastic gussets and the upper thigh has rubberized non-slip pads. Rain Gators are perfect for occasions when a full rain suit is not necessary.
CAN AM ACCESSORIES
Fitment
TOURING ACCESSORIES
A 20 ounce insulated thermal mug and versatile mounting bracket that offers multiple positions for the mug. A patented compression ring snugly holds the mug in place.
22.95
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
125
Index A Accent Grilles, Mini.......................................36 Accent Strips..................................................50 Accessory Socket..........................................89 Accessory Switches.......................................40 Add-A-Pocket.................................77, 101, 109 Add-A-System............................................. 101 Air Cleaner Covers........................................50 Air Intake Accent Grille........................... 70, 71 Air Pressure Control Accent.........................99 Air Pressure Gauge.....................................120 Air Supply Hose...........................................120 Air Vents..............................................76, 97, 99 Allen Head Cap Plugs..................................122 American Flag............................................. 113 Anti-Rotation Peg, Relocators & Clamp Sets.............................6, 7, 8, 9, 10, 11 Armrest Pouch..............................................20 Armrests................................................ 78, 100 ATV Accessories.......................................... 112 ATV Covers............................................... 16, 17 Auto Sound System..........................................4 Axle Cover................................................ 27, 66 Axle Plug........................................................27
B Backrest................................................. 78, 100 Banjo Cover....................................................29 Battery Side Accents.....................................51 Battery Side Cover Trim................................81 Belt Cover......................................................53 Beverage Butler..........................................125 Beverage Holder.................................... 20, 125 Brake & Clutch Levers...................... 42, 73, 99 Brake Bleeder Cover.....................................29 Brake Light Annunciator............................. 117 Brake Pedal Covers................................. 10, 11 Brake Reservoir Cover..................................29 Bulbs............................................................ 119 Bullet Fork Covers.........................................37
C C.B. Antenna....................................................5 C.B. Controller...............................................74 C.B. Knobs......................................................99 C.B. Switch Cover..........................................99 C.B. Unit Accent Panel...................................99 Caliper Accent...............................................28 Caliper Cover...........................................28, 65 Cam Covers..................................................103 Can Am Accessories............................. 110, 111 Carb Covers.................................................104 Celestar™ Accent Grille................................35 Celestar™ Brake Reservoir Cover................29 Celestar™ Headlight Visor............................34
126
Celestar™ Radiator Grille.......................44, 45 Celestar™ Reflector Accents........................36 Celestar™ Regulator Cover..........................43 Celestar™ Visors.....................................34, 35 Choke Knob Cover.........................................48 Cigarette Lighter............................... 89, 90, 97 Clamp Sets.......................................................9 Clutch & Brake Levers...................... 42, 73, 99 Coin Holder................................. 41, 73, 99, 104 Connector Adapter........................................90 Contours™ Mini Accent Grilles.....................36 Control Panel Accent.....................................76 Converter.......................................................89 Coolant Overflow Cover................................48 Cord Holders....................................................4 Cornering Light Trim.....................................92 Cornering Lights............................................92 Covers.............................14, 15, 16, 17, 111, 112 Cruis Wing™ Accents............................. 87, 106 Cruis Wing™ Helmet Lock Extensions..... 86, 103 Cruis Wing™ Kickstand......................... 79, 103 Cubby Stuff Sacs™.........................................18 CubbyHolds™......................................... 83, 104 CubbyNets™.......................................... 83, 104 Cylinder Covers.............................................95
D Dash Pouch............................... 24, 77, 101, 110 Double Sided Tape.......................................122 Drive Shaft Bolt Covers.................................53 Drive Shaft Cover...........................................53 Driver & Passenger Peg Sets......................6, 7 Driver Backrest..................................... 78, 100 Driver Peg Mount Bracket.............................79 Driving Light Kits....................30, 31, 33, 65, 92 Dual Load Equalizer.........................33, 90, 118 Dual Lock™ Fasteners.................................122
E Edge Guard..................................................123 Emblems................................................ 94, 123 Engine Side Carb Covers.............................104 Exhaust Tips.......................................... 87, 108
F Fader Control Knob.......................................99 Fairing Accent Grille......................................70 Fairing Air Intake Accent Grille............... 70, 71 Fairing Face Molding.....................................74 Fairing Light Harness Kit..............................96 Fairing Lighted Vent Trim..............................96 Fairing Lower Louver Set........................ 95, 96 Fairing Marker Light Grilles.........................95 Fairing Marker Turn Signal Kit......................96 Fairing Nose Trim....................................68, 91
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
•
Fairing Plugs................................................100 Fairing Pocket................................................20 Fairing Pocket Covers...................................77 Fairing Side Fin Louvers......................... 95, 96 Fairing Side Light Housing............................96 Fairing Skirts......................................... 97, 109 Fairing Vent Trim..................................... 95, 96 Fender Accents.................................. 47, 66, 93 Fender Extensions............................. 47, 66, 93 Fender Rails.......................................47, 66, 91 Filter Wrench............................................... 121 Flag.............................................................. 113 Flag Pole Mount........................................... 113 Flame Accents.............................................123 Floorboard Bottom Light...............................79 Floorboard Cover..........................................79 Floorboard Risers................................. 79, 104 Floorboard Side Covers.................................80 Floorboards...................................................10 Fog Light Kit...................................................67 Foot Peg Extensions........................................9 Foot Peg Relocators........................................9 Foot Pegs...................................6, 7, 8, 9, 10, 11 Fork Bag.........................................................20 Fork Cap Covers............................................39 Fork Cover............................................... 37, 94 Fork Deflectors..............................................37 Fork Lights............................................. 33, 109 Fork Stem Cover............................................39 Frame Cover............................................52, 80 Front Axle Cover...................................... 27, 66 Fuel Door Accent..................................... 76, 99 Fuel Shut Off Knob.........................................48 Fuel Shut Off Valve Plate Cover....................48 Fuel Tank Mount Accent................................49
G Gas Tank Protective Cover............................58 Gas Tank Top Cover........................................49 Grips.................................................. 12, 13, 112 Grommets.............................................. 90, 122
H Handlebar Clamp...........................................38 Handlebar Clamp Plugs................................73 Handlebar Dampeners..................................73 Handlebar Helmet Holder Set.............. 73, 103 Handlebar Riser Adapter Bolts.....................38 Handlebar Riser Shims.................................73 Handlebar Risers...........................................38 Hang Tags....................................................124 Headlight Beam Adjusting Knob...................99 Headlight Lower Grille............................68, 91 Headlight Protector.................................68, 92 Headlight Visor..............................................34
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
Q R
www.bigbikeparts.com
•
E-mail us info@bigbikeparts.com
127
GENERAL ACCESSORIES
Radiator Cap Cover........................................45 Radiator Grilles................................. 44, 45, 94 Radiator Top Cover........................................45 Radio Control Knobs................................ 76, 99 Radio Panel Accent.............................76, 97, 99
LIGHTING
Quad Equalizer....................................... 33, 118
LICENSE PLATE ACCESSORIES
Pac-A-Derms™..............................................46 Passenger Armrest Pouch...............20, 77, 101 Passenger Armrests............................. 78, 100 Passenger Audio Controller............................4 Passenger Boards................................... 6, 7, 8 Passenger Floorboard Bottom Light............79 Passenger Floorboard Covers......................79 Passenger Floorboard Risers............... 79, 104 Passenger Peg Sets................................ 6, 7, 8 Passenger Volume Knob...............................99 Peg Lowering Kit...........................................79 Peg Relocators & Clamp Sets.....................8, 9 Peg Relocators & Extensions......................8, 9 Peg Sets................................................... 6, 7, 8 Pocket Cover..................................................99 Pole Marker Lights...................................... 113 Position Light Grilles.....................................95 Pouches...................20, 24, 58, 77, 83, 101, 111
FLAGS & FLAG POLE MOUNTS
Map Holder & Travel Bag.. 18, 19, 20, 24, 57, 77, 101 Marker Lights................................. 32, 116, 118
P
AT V ACCESSORIES
M
Saddlebag CubbyNets™..............................104 Saddlebag CubbyPouch™............................104 Saddlebag Grilles..........................................85 Saddlebag Kickplate Set.............................103 Saddlebag Lift Tab Covers.............................54 Saddlebag Light (Rear)..........................84, 107 Saddlebag Liners....................................18, 111 Saddlebag Molding Inserts...................84, 106 Saddlebag Racks............................. 56, 83, 105 Saddlebag Rail Bag........................................20 Saddlebag Side Lights...........................84, 107 Saddlebag Spoiler Light Kit................... 89, 107 Saddlebag Support Stays..............................54 Saddlebag Tank Pouch..................... 57, 77, 111 Saddlebag Top Rails....................................106 Saddlebag Touring Corner Lights......... 89, 107 Safety Tag....................................................124 Scuffpads............................................... 82, 110 Shifter Peg Covers.........................................10 Shifter Kit.......................................................79 Shock Bolt Covers..........................................53 Show Caps....................................................125 Side Cover........................................ 51, 80, 104 Side Fairing Accents................................ 70, 71 Sissy Bar Kit..................................................55 Sissy Bar Luggage Rack................................55 Slider Brake Pedals....................................... 11 Slider Peg Sets.............................................. 11 Solo Racks.....................................................56 Spark Plug Covers.........................................50 Speaker Accents........................ 34, 74, 98, 104 Speaker Kits....................................................5 Speedo Visor..................................................49 Splashguard..........................................109, 125 Spoiler Light.......................................... 89, 107
CAN AM ACCESSORIES
LampGard™ Protectors.................... 67, 68, 92 LED Conversion Harness....................... 32, 118 LED Flasher Relay................................. 33, 118 LED Lights.....30, 31, 32, 34, 65, 66, 67, 68, 69, 70, 72, 74, 81, 84, 85, 87, 89, 91, 116, 117, 118 LED Splitter...................................................33 Levers................................................ 42, 73, 99 Lever Fringe..................................................42 License Plate Holder............................114, 115 Light Bar............................................ 30, 31, 92 Light Converter........................................33, 89 Light Grilles................ 34, 35, 36, 85, 87, 92, 95 Lower Cowl.........................................67, 82, 94 Lower Cowl Accent.................................. 90, 94 Lower Cowl Deflector....................................75 Lower Cowl Housing......................................94 Lower Fairing Corner Exit Trim....................96 Lower Fairing Corner Molding Trim.............96 Lower Fairing Pockets...................................20 Lower Fresh Air Vents...................................97 Lower Rain Deflector.....................................75 Lower Saddlebag Air Dam Spoiler..........84, 85 Lower Vent Knob............................................99 Luggage Bags.......................................... 18, 19 Luggage Racks.......................... 55, 56, 83, 105
S
Oil Dip Stick....................................................48 Oil Filler Cap..................................................48 Oil Filter Cover...............................................48 Oil Filter Wrench.......................................... 121 Oil Filters..................................................... 121 Opera Light....................................................70
TOURING ACCESSORIES
L
O
CRUISER ACCESSORIES
Key Plate Accent................................ 76, 86, 99 Kickstand............................................... 79, 103 Kickstand Assist..........................................103 Kickstand Foot/Disk....................................125 Kill Switch Cover.....................................72, 99 King Kooler....................................................18
Neck Cover/Trim...........................................49
WINDSHIELDS
K
N
LUGGAGE & BAGS
Ignition Panel & Key Switch Accent...............99 Illuminated License Plate Holder........114, 115 Illuminated Rotor Accent......................... 65, 91 Instrument Accent................................... 74, 98
Rain Deflector................................................75 Rain Gators............................................ 58, 125 Rear Axle Covers...........................................27 Rear Brake Caliper Cover.............................28 Rear Brake Reservoir Cover.........................29 Rear Fender Trim...............................47, 87, 93 Rear Lower Cowl...........................................82 Receiver Hitch/Rack.............................. 88, 108 Receiver/Trailer Lock.................... 88, 108, 124 Reflector Accent............................................36 Reflector Grilles............................................36 Regulator Cover.............................................43 Relocators....................................................8, 9 Risers.............................................................38 Rivets..............................................90, 112, 122 Rotor Accent, Illuminated........................ 65, 91 Rotor Disc Cover...................................... 65, 91 Running Light............................ 70, 84, 116, 117
COVERS
I
Martini Light Sets ............................. 66, 70, 84 Master Cylinder Covers..................... 40, 41, 72 Master Cylinder Face Clamp................... 40, 41 Master Cylinder Switch Block......... 40, 72, 102 Microphone Windsock.....................................4 Mini Halogen Driving Lights..30, 31, 32, 65, 92, 117 Mini Lamps................................................... 117 Mirror Back Accents................................ 69, 93 Mirror Lights........................................... 69, 93 Mirror Mount Covers.....................................93 Mirror, Visored Trim................................ 69, 93 Mirrors.....................................................42, 89 Mud flap.......................................................109
PEGS, BOARDS & GRIPS
Heated Grips..................................... 12, 13, 112 Heel Rest........................................................79 Helmet Bag....................................................19 Helmet Headset...............................................4 Helmet Holder................................ 42, 86, 103 Helmet Lock Extensions.................. 42, 86, 103 Highway Bars.................................................46 Highway Boards...............................................9 Hitch Pin & Clip............................................108 Horn Cover.....................................................37
AUDIO
INDEX CONTINUED
INDEX CONTINUED
Spot Light Kits..................................30, 31, 117 Spot Light Visor.............................................34 Star Washers................................... 55, 83, 106 Swing Arm Accents........................................52 Swing Arm Covers...................................52, 80 Swing Arm Pivot Caps...................................52 Switch Box Housing.................................40, 72
T Taillight Grille................................................35 Taillight Visor.................................................35 Tank Pad.........................................................58 Tank Pouch.................................57, 77, 100, 111 Tie Down Straps...........................................124 Timing Belt Covers......................................109 Timing Chain Cover........................................67 TireGardTM....................................................120 Tire Gauge....................................................120 Tire Pressure Monitoring System...............120 Trailer Ball Cover.................................. 88, 108 Trailer Dead Bolts.................................. 88, 124 Trailer Wire Harness............................. 88, 108 Trike Fender Racks.......................... 56, 83, 105 Trim Plugs......................................................91 Triple Tree Accents........................................39
Trunk Bag ................................................ 18, 19 Trunk Brake Light Conversion Kit...............108 Trunk Cargo Net............................................83 Trunk CubbyHolds™.............................. 83, 104 Trunk CubbyNet™........................................104 Trunk Grille Set..................................... 85, 106 Trunk Handle.................................................86 Trunk Key Accent................................... 86, 106 Trunk Lift Handle................................... 86, 106 Trunk Light Harness Kit................................89 Trunk Liners...........................................18, 111 Trunk Molding Inserts...................................85 Trunk Pouch............................................. 18, 19 Trunk Racks..................................... 56, 83, 105 Trunk Rack Bag..............................................19 Trunk Spoiler Light................................ 89, 107 Trunk Turn Signal Conversion Kit.................89 Turn Signal Adapter.......................................31 Turn Signal Conversion Kits.................. 32, 107 Turn Signal Grilles...................................35, 95 Turn Signal Light..................................... 32, 69 Turn Signal Visor.....................................34, 35 Tuxedo Tails™................................................57 Tuxedo Ties™.................................................57 Twisted Mirrors.............................................42 Twisted Risers...............................................38
U UltraGard® Bike Covers......... 14, 15, 16, 17, 111 Universal Flasher..........................................33 Upper Fairing Accent Set...............................96 Upper Fairing Edge Trim...............................96 Upper Fresh Air Vents...................................97
V Valve Covers................................................120 Valve Stem Covers.......................................120 Vanity Mirror..................................................89 Vent Covers...................................70, 71, 95, 96 Vent Knob.......................................................99 Visor Wiper.................................................. 112 Visored Mirror Trim................................. 69, 93 Volt Meter............................................... 74, 121 Volume Knob..................................................99
W Wind Deflectors....................................... 37, 75 Windscreen Air Vent......................................22 Windshield Accent.........................................94 Windshield Garnish.......................................68 Windshield Pouches......................................24 Windshield Trim Kit.......................................23 Windshields....................................... 21, 22, 23 Wrist Cruis™..................................................12
HONDA VT750 SHADOW Chrome Switch Box Housing pg 40
Master Cylinder Cover pg 41 Chrome Levers pg 42
Signature Series Tank Divider pg 57
Chrome Neck Covers pg 49 Fender Rail pg 47
Saddlebag Support Stays pg 54 Rear Shock Bolt Covers pg 53
128
Air Cleaner Covers pg 50
Passenger Peg pg 8
To l l Fre e D e a l e r O rd e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1
Driver Peg pg 8
•
Brake Pedal Cover pg 11
Radiator Grille pg 44
Consumer Inquiry Line 1-888-BIG-BIKE (1-888-244-2453)
Chrome Front Axle Cover pg 27