Syngenta XC 08 Nozzles

Page 1

Nozzle 08

Syngenta XC 08 Nozzles

Nozzle 08

Recommended for fungicides, herbicides and insecticides targeted at soil application as well as soil wetting agents.

Soil nozzle application chart colours

optimum foliage coverage, utilise 04 nozzles – Foliar fungicides, herbicides and insecticides as well as growth regulator applications.

For nozzles contact your local Syngenta Agent.

roughs

Other
Size Typical water volume (L/100 m 2) Typical spraying speed (km/hr) Recommended use 04 2.2 – 4 5 – 7 Foliar
on fairways and
Syngenta Nozzle range availability:
applications
For
Optimum range Nozzle Pressure (bar) Flow rate per nozzle (L/min) Application rate (L/100 m ) at respective forward speed (km/hr) 08 3 4 5 6 7 8 1 1.848 7.39 5.54 4.43 3.70 3.17 2.77 1.5 2.263 9.05 6.79 5.43 4.53 3.88 3.39 2 2.61 10.45 7.84 6.27 5.23 4.48 3.92 2.5 2.921 11.68 8.76 7.01 5.84 5.01 4.38 3 3.20 12.80 9.60 7.68 6.40 5.90 4.80 3.5 3.456 13.83 10.37 8.30 6.91 6.38 5.18 4 3.695 14.78 11.09 8.87 7.39 6.82 5.54

The rearwards spray angle compensates for the forward movement of the sprayer, delivering better all round coverage of the turf leaf.

More droplets, less drift – the benefits of XC air induction nozzles

Ridge on nozzle tip should face direction of travel

Angled spray

Fit Syngenta XC 08 Nozzles so that the angled spray pattern faces rearwards. Insert nozzles into the bayonet with the Syngenta logo and moulded arrow on the nozzle to the front (facing direction of travel).

Syngenta XC 08 Nozzles fit

ISO standard bayonet caps on most sprayers. Hardi sprayers will require bayonet adapters.

• The Syngenta XC nozzle delivers more droplets per mls of contents than other Air Induction nozzles on the market (the difference between middle nozzle and Syngenta nozzle on the right.)

• Reduces drift by an average of 14% (the difference between nozzle on the left and syngenta nozzle on the right.)

• This results in spray contents landing exactly where the intended target is aiding in giving better results out of any product being applied though the Syngenta XC nozzle.

Standard Flat Fan Nozzle Standard Induction Nozzle Syngenta XC 08 Nozzle

Standard Flat Fan

14% of droplets categorised as drifty

Syngenta Nozzle

Less than 3% spray droplets drift

The unique combination of Syngenta’s Nozzle design and air induction technology means significantly less drift.

Accurate spray application is an essential element of getting the very best results from every fungicide, herbicide, insecticide and growth regulator application.

Syngenta XC 08 Nozzles are designed to work at lower water volumes compared to conventional flat fan nozzles, which increases work rates and enhances product performance. Being significantly less susceptible to drift enables more spraying days, ensuring application at the best possible timing.

www.daltons.co.nz

0800 808 150

sales@daltons.co.nz

Syngenta Crop Protection Limited, 60 Parnell Rd, Parnell, Auckland 1052. Contact: (09) 306 1500 or www.syngentaturf.co.nz

®Registered trademark of a Syngenta Group Company. ™Trademark of a Syngenta Group Company. All products written in uppercase are registered trademarks of a Syngenta Group Company. ©Syngenta 2023.

PLEASE READ THE LABEL COMPLETELY BEFORE USE. Products approved pursuant to the HSNO Act 1996.

ACELEPRYN® Approval Code HSR007969. BARRICADE® Approval Code HSR101240. SB 23-314.

FLAME_SYN7477 6/23

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.