PhoenixCard User Guideline
目錄 1.
Software
2.
Software Instruction
2.1 Brief 2.2 Software Interface
3.
Burning Memory card Operation
1. Software Operation Click on the following file PhoenixCard.exe ďźŒ
2. Software brief 2.1.Introduction PhoenixCard Software can build the updated firmware in Micro SD Memory card. User can use different mode of burning Micro SD memory Card. It enables the recovery of Tablet PC process.
2.2.Sofware Interface PhoenixCard Interface as follow:
1） ．
Mouse click the above icon. Software will detect the Memory card’s Drive automatically
2） ．
If computer build on different external storage, please select the Micro SD Drive 存 only.（Strongly recommend plug in one external storage when you try to burn firmware in Micro SD memory card. Don’t try to insert any external storage while the software operation.）
3）． Mouse click the img file icon and please select the img location The img file is the updated firmware you should cover it. 4）．Operation Mode
Select Write Mode to Product.
5). Mouse click on Burn button and software will function. Don’t operate other operation during the burning process. The operation will format all micro SD memory.
6）． Mouse click the above icon and memory card will format to 100% original memory card.
7）． Mouse click on above icon will clear all info
8）． Mouse click on above icon for text help.
9）． Mouse click on above icon for exit
3. Burning Card Operation Step： Step 1：Click on phoenixcard.exe
Step 2：Insert Card Reader for Micro SD Card
Step 3：Click
Step 4：Click
button
select the table for
correct drive.
Step 5：Click
file for img file (The updated firmware)
Step 6: Select your burn mode，select Product Step 7：Click The operation will display the process status.