Child Emancipation System from Bore Well

IDL - International Digital Library For Technology & Research Volume 1, Issue 3, Apr 2017

Available at: www.dbpublications.org

International e-Journal For Technology And Research-2017

Child Emancipation System from Bore Well B.JAYASRI1, R.INDHUMATHI2, M.GOWSALYA3 M.VASANTHA KUMAR4.

1

2 3 4 UG SCHOLAR UG SCHOLAR UG SCHOLAR ASSISTANT PROFESSOR ECE DEPARTMENT 1

AVS ENGINEERING COLLEGE, SALEM-3.

ABSTRACT: This project is based on the emancipationof child in the bore well. Nowadays,more borewells which is left as uncovered.So many child are easily struck in the borehole.Normal process of salvation the child is to pit a dig using JCB machine near to the borewell.That logic is more complex and takes more time to recover the strucked child form the borewell.The mechanical system inside the borewell regarding with the user command given to ATMEL microcontroller.The hardware is attached to PC for starting the operation of DC motor.It consists of DC motor, camera,safetyballon.This mechanical setup can use to release trapped baby from borewell within less time.

KEYWORDS: Bore well, ATMEL Microcontroller, DC Motor, Mechanical setup.

INTRODUCTION: Nowadays, water scarcity is the most important problem in india.To reduce this problems borewells are constructed.Even though the water level is decreased. So the borewells are left unclosed. Thisborewells have started to take many innocent lives. Small children get trapped in bore wellwithout noticing it due to playful activities of them. To get a trapped child is very challenging one many times the rescue system takes the child life leads to death.

This incident of death occurs due to lack of oxygen, increases temperature and humidity in the depth will be the risk for child life. So, there is no proper solution for giving relief to such accidents.

In this child emancipation system there is no chance of damaging human body. The famous scientist Benjamin Franklin said “An ounce of prevention is worth a pound of cure.�

1. EXISTING SYSTEM: Robotic system are involved to help the human beings to reduce their effort in rescue system.Inexisting system,a big hole is dug beside the borewell upto the depth where the child is struck and find the child using rope.It takes long time at this time the Child would get die due to lack of oxygen .

In another method ,the trapped baby is get by using light weight machine systematically(robot).It is operated by PC using wireless zigbeetechnology.In this system human use the button on the keyboard from PC,then its related data send via zigbee.This kind of information is received by ARDUINO. 2.

PROPOSED SYSTEM:

In our proposed system, the mechanical and electronic components are formed as a robot.It carries web camera, safety balloon, pneumatic cylinder and volleyball bladder.The web

IDL - International Digital Library For Technology & Research Volume 1, Issue 3, Apr 2017

Available at: www.dbpublications.org

International e-Journal For Technology And Research-2017 camera is attached to the lifting rod.It lift the trapped child with safely.The pneumatic cylinder is used to give the oxygen supply.

The oxygen pump is also fixed to the robot system. The human command given to PC.This design done by using three DC motor.

It also having the bevel gear, relay circuit and driver circuit in this mechanical setup. Bevel gear is used for rotate the motor. Relay is an electromagnetic switch operated by a small electric current that can turn on or off a much larger electric current.

The driver circuit is an electrical circuit used to control another circuit or components. This system mainly consist of 4 arms to carry out the child safely from the borehole. The whole operation is based on ATMEL micro controller. It is used for low power consumption.

3.

BLOCK DIAGRAM:

less time and trapped child in borewell safely.This project is used to reduce the manual efforts for saving the child fromborewell.The continuously monitoring of child in the borewell with the help of camera.

REFERENCES: [1].Dr.C.N.Sakhale,D.M.Mate,SubhasSaha,TomarDharmpal,Pra njitKar,ArindamSarkar”An Approach to Design of Child Saver Machine for Child Trapped in Borehole ”International Journal Of Research In Mechanical Engineering.

[2].S.Gopinath,T.Devika,L.Manivannan,Dr.N.SuthanthiraVanith a”Rescue Child from Borewell using Embedded system”International Research Journal Of Engineering and Technology.

[3].E.Poorniya,S.Sumathi”Borewell Rescue Robot “International Journal Of Computer Applications.

[4].R.ShahVrunda ,Chirag S Dalal,RajeevDubey”Automate Machine For Rescue Operation Of Child”.

[5].Manish Raj,P.Chakraborty, G.C.Nandi”Rescue Robotics In Borewell Environment “Indian Institute Of Information Technology.

AUTHOR’S PROFILE: B.Jayasri Currently pursuing BE Electronics and Communication Engineering in 2017 from AVS Engineering College affiliated by Anna University, Chennai.

R.Indhumathi currently pursuing BE Electronics and Communication Engineering in 2017 from AVS Engineering College affiliated by Anna University, Chennai.

M.Gowsalya currently pursuing BE Electronics and Communication Engineering in 2017 from AVS Engineering College affiliated by Anna University, Chennai.

CONCLUSION: During the past few years, more number of children’s life has been lost due to uncovered borewell accidents. In this proposed system, theemancipation operation will complete in

Professor.M.Vasanthakumar Completed B.E Electronics and Communication Engineering in 2009 from Paavai Engineering college and Completed M.E degree in VLSI Design fromAVSEngineering college affiliated by Anna University, Chennai.