CATERPILLAR 345CL HYDRAULIC PIPELAYER
Revolutionary state of the art patented design
STANDARD EQUIPMENT Caterpillar 345CL excavator upper and lower structure • • • • • • • • • • • • •
Boom stop (Positive boomstop) Anti Two Block Device Center Point Swing Bearing Automatic Boom Kick-out Double Security System for Piloting CE and EPA Certified TUV Chartered Engineers Certification High visibility during operation with adjustable higher seat. Kick out boom Anti-two block system Swing Alarm Back up alarm Left side joystick safety switch
Disclaimer The information contained in this brochure is intend to be of a general use only. Delta may at any time for technical or other necessary reasons modify any of the specifications mentioned. Illustrations do not necessarily show the product in standard conditions.The dimensions, weights and capacities shown are approximate only and are subjects to variations within normal manufacturing techniques.
3640
7750
1320
3210
9630
CATERPILLAR 345CL HYDRAULIC PIPELAYER
2740
4360
3640
5360
15050
6480
BASE MACHINE
CONTROLS
Caterpillar 345 Excavator
Fully hydraulic dual joystick controlled
CONVERSION KIT
DRIVE
DELTA 345 Hydraulic conversion kit: State of the Art patented design delivers excellent visibility to the job site which increase operator confidence, comfort, effectiveness and enhanced safety.
Type Max. Drawbar Pull Main pumps
CONVERSION KIT IS AVAILABLE ON BRAND NEW AND USED CATERPILLAR 345L/ 345BL/ 345CL/ 345DL
Brand Max flow Final drive
: Hydrostatic : 337,7 kN / 75,920lb : Two-speed axial piston hydraulic motors : Caterpillar : 350 bar / 5080 psi : Compact design with three stages planetary production
15050
ENGINE CAB Brand : Caterpillar Model : C13 with ACERT technology Bore : 130.0 mm (5.12 in) Stroke : 157.0 mm (6.18 in) Displacement : 12.5 L (762.8 in3) Certification rating : 345HP/ 257kW Aspiration : Turbocharged Emissions meet : U.S. EPA and EU Stage IIIA Control system ADEM A4 electronic engine controller maximizes fuel efficiency and performance by maintaining the optimum balance between engine speed and hydraulic demand. TIPPING CAPACITY Maximum lift 90.000 kg OPERATING WEIGHT
: Included : Included : Positive filtered ventilation with a pressurized cab Seat : Air suspension and high visibility Design : Visibility, comfort and easy operation allows the operator to focus on safe production and increase productivity Sound performance : Meets OSHA and MSHA requirements BOOM Frame
: Tabular A-Frame boom engineerd for maximum lift capacity and easy detachment Length : 9 meter 2-speed hook block : HIGH - 17 mtr/min, LOW - 8 mtr/min HYDRAULIC WINCHES
47.065 kg
Make
COUNTERWEIGHT Total weight
Airconditioning Heater Climate Control
: 7611 kg / 16,780 lbs
: Paccar/ Braden, Planetary dual brake lifting and deriking winch. Hydraulic motors : Bosch/Rexroth 2 speed Hydr. Piston motors Diameter wire rope Boom : 3/4 Inch / 19mm Diameter wire rope Load : 3/4 Inch / 19mm
1
2
3
4
5
6
7
8
9
1
Caterpillar C13 ACERT Tier IIIA engine 345HP (made in USA)
2
LMI safety system on request (made in Netherlands)
3
Boom mounted lightbar with in-cab monitor on request (made in Netherlands)
4
Paccar Braden winches (made in USA)
5
Bosch/Rexroth hydraulic motors for winches (made in Germany)
6
Left and right re-inforced track frame brackets to minimize stress on track frames (made in Netherlands)
7
Front heavy duty bracket for maximum lifting capacity (made in Netherlands)
8
Hydraulic operated kit lifter to change working range or transport mode (made in Netherlands)
9
Can be transported in one load without dismantling anything (Designed in Netherlands)
CE marked
lb x 1000
kg x 1000
220
100
200
90
180
80
Max. Lift Capacity S.A.E. J743B
70
Max. Load Capacity ISO 8813
Lifting Capacity
160 140 120 100
1399 Engine Torque lb•ft
40 20
1159 1038
60
415 Engine Power bhp
50 45 40
380 344 308
80 60
1279
30
358
20
BSFC lb/bhp-hr
Working Range ISO 8813
10
1.5 2 4
6
2.5 8
3 10
3.5 4 12
4.5 5 14
16
5.5 18
6 20
6.5 22
7 24
Boom Overhang
M Ft
UNDERCARRIAGE Number of bottom rollers Number of carrying rollers Shoes type Standard shoes width Track Frames
1200
1400
1600
1800
2000
2200
Delta 345CL patented conversion kit
FEATURES & BENEFITS :9 :2 : Single Grouser / Tripple Grouser : 750 mm : Heavily reinforced track frame brackets minimizes stresses in upper frame and swing bearing and optimize stability
FLUID CAPACITIES Fuel tank Hydraulic system circuit Cooling system Engine oil Final drive each
344 337
0 1
351
345 Conversion kit: Kit specifications have advanced safety features in addition to the updated and market ability of the Caterpillar equipment 3 side working range: It’s configuration allows the sideboom to operate from the right, left and in the front Prepare for transportation: Machine can be taken from working- to transport mode in a matter of minutes
: 705 ltr. / 186 gal : 570 ltr. / 150 gal : 61 ltr. / 16 gal : 42 ltr. / 11 gal : 15 ltr. / 4 gal
Transportation: Unique designed that allows the 345CL pipelayer to be transported in one load, without dismantling anything from the machine.
OPTIONS • Delta Load Management System for increase effectiveness and safety • Boom mounted light bar with in-cab monitor and warning systems to optimize safety • Load Cell • Reverse Camera • Cold Weather Kit • GPS Telemetry System • Optional boom lengths available • Excavator attachments to convert machine to conventional Caterpillar 345CL excavator DIMENSIONS
Length
Machine (without boom): 6.480 Boom 9.000 Total Shipping Volume
: 76 m3
Width
Height
3.640 2.200
3.210 0,700
Multi-axis: Hydraulic joystick allows simultaneous, precise control of the load and boom functions with one hand. Joysticks: Dual joystick-controlled hydraulic system is easy to operate and requires minimum operators training. Boom stop: Hydraulic boomstop stops automatically prevents system over travel and boom damage. Multifunctional: 345CL Pipelayer can be converted in a conventional excavator by swapping the boom in a short period of time.
CATERPILLAR 345CL HYDRAULIC PIPELAYER
Dealer:
The Netherlands
United Arabic emirates
United states of America
Delta Machinery
Ras Al Khaimah Machineries LLC
Equipment Investco
Haven M529, Port of Moerdijk Mark S Clarkelaan 6 4761RK Zevenbergen The Netherlands
Kharran Road, Al ďŹ liyah Ras Al Khaimah United Arab Emirates
3340 Greens road, Suite 400 Houston Texas United states of America
Tel + 31 888 966 966 Fax + 31 888 966 950
Tel + 971 72289338 Fax + 971 72289337
Tel +1281 590 7474 Fax +1713 2032444
info@deltamachinery.nl www.deltamachinery.nl
rakplant@emirates.net.ae www.rakmachineries.com
odecaro@aol.com www.deltaheavymachinery.com