Louis Poulsen: Icons

lp Icon f u l l

c u t o f f

&

c u t o f f

l u m i n a i r e

lp icon f u l l

c u t o f f

&

c u t o f f

l u m i n a i r e

Louis Poulsen Lighting introduces the LP Icon – a new family of architecturally scaled reflector based outdoor luminaires designed with high performance optics. A variety of mounting options, including post top, cable-mounted and wall-mounted, allow the LP Icon to complement any project. Available as a full cutoff or cutoff classification with a variety of photometric distributions, the LP Icon family fits into the Louis Poulsen Lighting philosophies of light and architecture. The simple shape of the luminaire blends harmoniously with many types of architecture and provides visual interest with a self-illuminating dome option. Created in two scales, the LP Icon Mini and LP Icon Maxi both utilize their reflector design to comply with the strictest of energy and lighting control codes and ordinances, producing responsible lighting by controlling glare and unwanted uplight.

c o n t e n t

One product solution . . . . . .

4

Adaptability . . . . . . . . . . . .

6

Light technique . . . . . . . . . .

8

Photometrically speaking .

10

A lighting solution . . . . . .

12

Product features . . . . . . . .

16

Light performance . . . . . .

20

Technical specifications . .

24

4

o n e p r o d u c t s o l u t i o n f o r v a r i e t y o f a p p l i c a t i o n s

a

residential streets Simplicity, function and architectural adaptability: The philosophy at Louis Poulsen Lighting is to create solution based products in families that meet demanding lighting criteria and demanding environmental conditions while easily integrating with the architecture. With the LP Icon family, we strive to create a simple sensibility for buildings and their surroundings. One product, two sizes, cutoff and full cutoff options, with precise rotatable reflector optics, including Type III, Type V, and Type V Square distributions, along with post, wall and cable mounting possibilities, offer infinite lighting solutions. The design expression of the LP Icon offers a choice between a self-illuminating cutoff translucent form and a full cutoff opaque form. Maintaining the Louis Poulsen tradition of developing products that are both innovative and timeless, the LP Icon is built for longevity.

p e r i m e t e r

sidewalks

b u i l d i n g w a l k w a y s

&

s e c u r i t y b i c y c l e

p a t h s

f a c a d e s

b i k e w a y s c o u r t y a r d s

a n d

p l a z a s

open areas

alleys

s e c o n d a r y

r o a d w a y s

medians p e d e s t r i a n

p a t h w a y s

parking a r e a s

6

a d a p t a b i l i t y

The simple design and different mounting possibilities of the LP Icon, allows for adaptation to different architectural environments.

15.6”

Cable

25”/32”

18.7”

8.5”

26.0”

mount Wall

15.6”

mount

11.3” DIA.

25”/32”

9.8”

Davit

9.8”

15.6”/21.2””

15.6”/21.2””

mount

21.2”

Mini: 12’/14’/16’ Maxi: 18’/20’

Mini: 12’/14’/16’ Maxi: 18’/20’

Straight mount

8.5” 23.3”

18.7”

l i g h t

8

l p

i c o n

t e c h n i q u e

r e c o m m e n d e d

a p p l i c a t i o n

m a t r i x ICON MINI ICON MAXI

Applications

Applications

Distribution Options TYPE III

Pedestrian areas Secondary roadway Medians Parking Courtyards and plazas Open areas Perimeter/security Walkways and bikeways Building facades

• • • • • • • •

TYPE V SQUARE

• • • • • •

Classifications Full Cutoff

• • • • •

Distribution Options TYPE III

Cutoff Pedestrian areas

• • • • • • • • •

Medians Courtyards and plazas Open areas Perimeter/security Walkways and bikeways Building facades Main Streets Residential Streets Sidewalks

• • • • • • • • •

TYPE V SQUARE

Classifications Full Cutoff

• • • • • •

With many configurations to choose from, you can tailor the luminaire to your application.

The LP Icon Mini offers both a Type V and Type V Square distribution in addition to a Type III distribution.

The LP Icon Maxi offers a Type V Square distribution and a Type III distribution.

design

possibilities

Whether you choose full cutoff or cutoff, you are able to create a lighting environment with the same design attitude.

lp icon mini full cutoff

lp Icon mini cutoff

lp icon maxi full cutoff

lp icon maxi cutoff

Full Cutoff: At 0% of candela intensity at or above 90° and 3% candela intensity at 80°, the LP Icon satisfies IESNA Full Cutoff criteria.

Cutoff: At 1.2% of candela intensity at or above 90° and 3% candela intensity at 80°, the LP Icon easily satisfies IESNA Cutoff criteria.

• • • • •

Cutoff

• • • • • • • • • •

LP Icon Mini. Bath University, Bath, United Kingdom. Specifier: Buro Happold. Photo: Mandy Reynolds/Fotoforum.

p h o t o m e t r i c a l l y

10

s p e a k i n g

definitions & conventions

When defining the vertical and lateral distribution of the light from a roadway luminaire, the IESNA uses mounting height (MH) as its key unit of measure. 1.0 MH is the vertical distance between the light source and the ground surface.

Vertical light is the light striking a vertical surface.

IESNA guidelines recognize 3 spacing classifications for both Type III and Type V: short, medium, and long.

Short:

Maximum candela point lies between 1.0MH and 2.25MH TRL

Medium: Maximum candela point lies between 2.25MH and 3.75MH TRL Long:

Maximum candela point lies between 3.75MH and 6.0MH TRL

lateral & vertical light distribution reference grid Lateral light distribution refers to the classification type.

IESNA guidelines specify that in order to earn a Type III classification, the half maximum isocandela trace must intersect forward of the luminaire, away from the house side and on to the road side, at 1.75MH and not go beyond 2.75MH.

light distribution

IESNA Type III reflector reduces light trespass and its asymmetric distribution allows the owner to direct the light where it is needed.

IESNA Type V reflector throws a symmetric distribution and offers an aesthetically appealing light pattern on a wall surface.

IESNA Type III asymmetric distribution

IESNA Type V symmetric distribution

glare Glare is the visual discomfort associated with a luminance source. Glare is caused by several factors, including insufficiently shielded light sources or luminaires that emit excessive light in an observer’s normal line of sight. The IESNA identifies 2 types of glare: disability and discomfort glare.

Disability glare, so called because it can interfere with visual tasks, is caused by a reduction in contrast and results in reduced visual performance.

Discomfort glare is considered more subjective, yet is dependent on the luminance of the luminaire, the observer’s adaptation level, the luminaire position, and size and number of glare sources. Discomfort glare can be reduced by increasing the size of the diffusing area around the light source and by increasing angular displacement of the light source from the line of sight.

All road users, motorists and pedestrians, are familiar with glare from road lighting. For this reason, efficient prevention of discomfort glare has become a key element in the design of good roadway lighting.

12

l p

i c o n

–

a

l i g h t i n g

s o l u t i o n

Offering symmetrical light distribution and ideal for pedestrian streets and courtyards, the cable-hung LP Icon is a classic solution when a median may not exist.

LP Icon Mini Type V square light distribution

Maintaining uniform lighting levels for both roadways and pathways is accomplished by taking advantage of a variety of lighting solutions.

LP Icon Mini Type V light distribution LP Icon Mini Type III light distribution

A simple design with highly efficient optics provides solutions for a variety of applications. Exemplified by simplicity, function and architectural adaptability, the LP Icon’s vertical illumination provides a strong sense of security while maintaining its classic architectural design. In daytime, the LP Icon makes an architectural statement as it complements a variety of environments. By nighttime, the precise optics of the LP Icon offers a practical architectural solution.

With its flexible mounting and distribution options, the LP Icon allows for comfortable transition between spaces, such as moving from a secondary road to a pedestrian area to a lakeside.

LP Icon Mini Type III light distribution

At higher mounting heights, the LP Icon provides ample illumination in the open spaces of parking lots, plazas and access roads.

LP Icon Maxi Type V square light distribution LP Icon Maxi Type III light distribution

LP Icon Mini. Bath University, Bath, United Kingdom. Specifier: Buro Happold. Photo: Mandy Reynolds/Fotoforum.

16

p r o d u c t

f e a t u r e s

performance

• Precise geometry to provide consistency of light distribution and to minimize inter-reflection • Base-up vertical lamp orientation, to assure stable color and full lamp life • Toolless installation and removal • Rotatable optics in 90° increments for design flexibility with assymetric reflectors • Pre-anodized aluminum reflector material has a high total reflection (TR) of 95% in addition to a textured surface, which helps reduce discomfort glare and provides a more even light distribution

• Toolless access to integrated electrical gear

quality

construction

• Vandal resistant injection molded translucent acrylic or opaque ASA enclosures • UV resistant enclosure will not yellow or degrade • Tempered glass allows optimal optical performance • Glass secured by stainless steel safety cable • Powder coated cast aluminum housing

adjustability

• Rotatable arm to align luminaire photometrically and aesthetically • Rotatable luminaire to avoid hotspots and excessive glare by keeping luminaire lens parallel to the ground

• The House Side Shield (HSS) is used at site

flexible

options

perimeters to cut down on light trespass

• The Quartz Restrike (QRS) satisfies life safety and local energy regulations by providing instantaneous auxiliary light in the event of a power outage

• A photocell (PHC) can measure the available outdoor light and automatically turn the luminaire on when low light levels warrant

18

p r o d u c t

t o o l l e s s r e l a m p i n g Completely toolless access to the lamp, ballast, and electrical gear is integrated into the luminaire head with a selfdisconnecting ballast compartment for added ease of maintenance.

f e a t u r e s

LP Icon Maxi. Kiel Railway Station, Kiel. Germany. Architect: ArchitekturbĂźro GĂśssler, Hamburg, Germany. . Photo: Udo Kowalski.

20

l i g h t

p e r f o r m a n c e

site

design

Isocandela traces are given in units of mounting height. To estimate illuminance levels on the ground at a certain distance from the luminaire, choose the set of numbers for the isocandela traces that match the color of the mounting height of the luminaire you are considering. The 5 graphs each represent a specific type of lamp and lamp wattage and it is intended for use as a guide only. For a precise luminaire layout we encourage the user to obtain the specific photometric files from Louis Poulsen Lighting, Inc. or have Louis Poulsen Lighting calculate your precise luminaire layout.

Type III LP Icon Maxi 250W metal halide for both cutoff and full cutoff

Type V Square LP Icon Maxi 250W metal halide for both cutoff and full cutoff

Type V Square LP Icon Mini 150W metal halide for both cutoff and full cutoff

Type III LP Icon Mini 150W metal halide for both cutoff and full cutoff

Type V LP Icon Mini 150W metal halide for both cutoff and full cutoff

LP Icon Mini. Bath University, Bath, United Kingdom. Specifier: Buro Happold. Photo: Mandy Reynolds/Fotoforum.

t e c h n i c a l

specifi

c ations

LP Icon Mini Post Top Full Cutoff

post tops

Design: Mads Odgård Page 28 Page 30

6.4”

Page 32 Page 34

15.6”

26

Page 36

18.7”

Page 44

Page 40

Page 46

Page 42

s p e c i f i c a t i o n

LPI-MIN-FCO-T3-1150W-MH

LP Icon Mini Post Top Full Cutoff provides direct downward illumination.

Depending on the choice of reflector, the lighting characteristics will vary.

The reflector types have been designed in three variations to provide either asymmetrical or symmetrical distributions of light.

Ordering example: 1 2 Prod.code Light source LPI-MIN-PT-FCO 1/150W/MH/ED-17

1

Product code LPI-MIN-PT-FCO

2

Light source 1/70W/HPS/ED-17 medium a 1/100W/HPS/ED-17 medium a 1/150W/HPS/ED-17 medium a 1/70W/MH/ED-17 medium a,b 1/100W/MH/ED-17 medium a,b 1/150W/MH/ED-17 medium a

Finish Natural painted aluminum or charcoal grey, powder coated.

LPI-MIN-FCO-T5-1150W-MH

Material Enclosure: Light grey, injection molded opaque ASA. Reflector: Preanodized segmented high reflectance aluminum. Bottom enclosure: Silk screened heat tempered glass.

Housing: Die cast aluminum.

3

Voltage 120-277V CC a 120-277V EB b

4

Finish CHAR. GREY NAT. PAINT ALU.

5

Distribution T3 (Type III IES) T5 (Type V IES) T5SQ (Type V SQUARE)

6

Transition to pole DAV SRA

7

Options HSS (House Side Shield)c QRS (Quartz Restrike) PHC (Photo Cell)d

Mounting Post Top: Mounted on davit (DAV), or straight (SRA) arm.

LPI-MIN-FCO-T35SQ1-150W-MH

Weight Max. 27 lbs.

Label cUL, Wet location. IBEW.

3 Volt.

120-277V CC

4 Finish CHAR. GREY

5 Dist.

T3

6 Trans SRA

Specification notes: a.Provided with 120/208/240/277V integral open core and coil ballast. b. Provided with 120-277V integral electronic ballast. c. HSS (House Side Shield) available only for T3 distribution. d. PHC (Photo Cell) is not available for 150W variants.

Info notes: I. Enclosure is impact resistant ASA. II. For pole selection, refer to Pole Section.

III. The comparable EU version has the following classification: Ingress Protection Code: IP66.

IV. Full Cutoff. A luminaire light distribution where zero candela intensity occurs at an angle of 90° above nadir, and all greater angles from nadir. Additionally, the candela per 1000 lamp lumens does not numerically exceed 100 (10%) at an angle 80° above nadir. This applies to all lateral angles around the luminaire.

LP Icon Mini Post Top Full Cutoff

post tops

Design: Mads Odg책rd

LPI-MIN-FCO-T3-1-150W-MH

LPI-MIN-FCO-T5-1-150W-MH

LPI-MIN-FCO-T5SQ-1-150W-MH

27

LP Icon Mini Post Top Cutoff

post tops

Design: Mads Odgård Page 26 Page 30

6.4”

Page 32 Page 34

15.6”

28

Page 36

18.7”

Page 44

Page 40

Page 46

Page 42

s p e c i f i c a t i o n

LPI-MIN-CO-T3-1150W-MH

LP Icon Mini Post Top Cutoff provides mainly direct downward illumination.

The hemisphere is lit up from within and creates a soft diffuse upward light. Depending on the choice of reflector, the downward lighting characteristics will vary. The reflector types have been designed in three variations to provide either asymmetrical or symmetrical distributions of light.

Ordering example: 1 2 Prod.code Light source LPI-MIN-PT-CO 1/150W/MH/ED-17

1

Product code LPI-MIN-PT-CO

2

Light source 1/70W/HPS/ED-17 medium a 1/100W/HPS/ED-17 medium a 1/150W/HPS/ED-17 medium a 1/70W/MH/ED-17 medium a,b 1/100W/MH/ED-17 medium a,b 1/150W/MH/ED-17 medium a

Finish Natural painted aluminum or charcoal grey, powder coated.

LPI-MIN-CO-T5-1150W-MH

LPI-MIN-CO-T5SQ-1150W-MH

Material Enclosure: White opal, injection molded translucent acrylic. Reflector: Pre-anodized segmented high reflectance aluminum. Bottom enclosure: Silk screened heat tempered glass. Housing: Die cast aluminum.

Mounting Post Top: Mounted on davit (DAV), or straight (SRA) arm.

Weight Max. 27 lbs.

Label cUL, Wet location. IBEW.

3 Volt.

120-277V CC

3

Voltage 120-277V CCa 120-277V EBb

4

Finish CHAR. GREY NAT. PAINT ALU.

5

Distribution T3 (Type III IES) T5 (Type V IES) T5SQ (Type V SQUARE)

6

Transition to pole DAV SRA

7

Options HSS (House Side Shield)c QRS (Quartz Restrike) PHC (Photo Cell)d

4 Finish CHAR. GREY

5 Dist.

T3

6 Trans SRA

Specification notes: a. Provided with 120/208/240/277V integral open core and coil ballast. b. Provided with 120-277V integral electronic ballast. c. HSS (House Side Shield) available only for T3 distribution. d. PHC (Photo Cell) is not available for 150W variants.

Info notes: I. Enclosure is impact resistant acrylic.

II. For pole selection, refer to Pole Section.

III. The comparable EU version has the following classification: Ingress Protection Code: IP66.

IV. Cutoff. A luminaire light distribution is designated as cutoff when the intensity per 1000 lamp lumens does not numerically exceed 25 (2.5%) at an angle of 90° above nadir (horizontal), and 100 (10%) at a vertical angle of 80° above nadir. This applies to any lateral angle around the luminaire. (In some cases the cutoff distribution may meet the requirements of the semicutoff distribution.)

LP Icon Mini Post Top Cutoff

post tops

Design: Mads Odg책rd

LPI-MIN-CO-T3-1-150W-MH

LPI-MIN-CO-T5-1-150W-MH

LPI-MIN-CO-T5SQ-1-150W-MH

29

LP Icon Wall Full Cutoff

wal l

Design: Mads Odgård Page 32 Page 26

23.3”

Page 28 Page 34

15.6”

11.3” DIA.

30

Page 36

18.7”

Page 44

Page 40

Page 46

Page 42

s p e c i f i c a t i o n LP Icon Wall Full Cutoff provides direct downward illumination. The reflector has been designed to provide a round symmetrical distribution of light.

LPI-MIN-CO-T3-1150W-MH

LPI-MIN-FCO-T5-1150W-MH

Finish Natural painted aluminum or charcoal grey, powder coated.

Material Enclosure: Light grey, injection molded opaque ASA. Reflector: Preanodized segmented high reflectance aluminum. Bottom enclosure: Silk screened heat tempered glass.

Housing: Die cast aluminum.

Mounting plate: Cast aluminum. Arm: Aluminum.

Mounting Surface: Mounted directly to finished surface over a recessed 4” octagonal junction box.

Weight Max. 27 lbs.

Label cUL, Wet location. IBEW.

Ordering example: 1 2 Prod.code Light source LPI-W-FCO 1/150W/MH/ED-17

3 Volt.

120-277V CC

1

Product code LPI-W-FCO

2

Light source 1/70W/HPS/ED-17 medium a 1/100W/HPS/ED-17 medium a 1/150W/HPS/ED-17 medium a 1/70W/MH/ED-17 medium a,b 1/100W/MH/ED-17 medium a,b 1/150W/MH/ED-17 medium a

3

Voltage 120-277V CCa 120-277V EBb

4

Finish CHAR. GREY NAT. PAINT ALU.

5

Distribution T3 (Type III IES) T5 (Type V IES)

6

Options QRS (Quartz Restrike) PHC (Photo Cell)c

4 Finish CHAR. GREY

5 Dist.

T5

Specification notes: a. Provided with 120/208/240/277V integral open core and coil ballast. b. Provided with 120-277V integral electronic ballast. c. PHC (Photo Cell) is not available for 150W variants.

Info notes: I. Enclosure is impact resistant ASA. II.The comparable EU version has the following classification: Ingress Protection Code: IP66.

III. Full Cutoff. A luminaire light distribution where zero candela intensity occurs at an angle of 90° above nadir, and all greater angles from nadir. Additionally, the candela per 1000 lamp lumens does not numerically exceed 100 (10%) at an angle 80° above nadir. This applies to all lateral angles around the luminaire.

LP Icon Wall Full Cutoff Design: Mads Odg책rd

LPI-MIN-FCO-T3-1-150W-MH

LPI-MIN-FCO-T5-1-150W-MH

wal l

31

LP Icon Wall Cutoff

wal l

Design: Mads Odgård Page 30 Page 26

23.3”

Page 28 Page 34

15.6”

11.3” DIA.

32

Page 36

18.7”

Page 44

Page 40

Page 46

Page 42

s p e c i f i c a t i o n LP Icon Wall Cutoff provides mainly direct downward illumination. The hemisphere is lit up from within and creates a soft diffuse upward light.

The reflector has been designed to provide a round symmetrical distribution of light.

LPI-MIN-CO-T3-1150W-MH

LPI-MIN-FCO-T5-1150W-MH

Finish Natural painted aluminum or charcoal grey, powder coated.

Material Enclosure: White opal, injection molded translucent acrylic. Reflector: Pre-anodized segmented high reflectance aluminum. Bottom enclosure: Silk screened heat tempered glass. Housing: Die cast aluminum. Mounting plate: Cast aluminum. Arm: Aluminum.

Mounting Surface: Mounted directly to finished surface over a recessed 4” octagonal junction box.

Weight Max. 27 lbs.

Label cUL, Wet location. IBEW.

Ordering example: 1 2 Prod.code Light source LPI-W-CO 1/150W/MH/ED-17

3 Volt.

120-277V CC

1

Product code LPI-W-CO

2

Light source 1/70W/HPS/ED-17 medium a 1/100W/HPS/ED-17 medium a 1/150W/HPS/ED-17 medium a 1/70W/MH/ED-17 medium a,b 1/100W/MH/ED-17 medium a,b 1/150W/MH/ED-17 medium a

3

Voltage 120-277V CC a 120-277V EB b

4

Finish CHAR. GREY NAT. PAINT ALU.

5

Distribution T3 (Type III IES) T5 (Type V IES)

6

Options QRS (Quartz Restrike) PHC (Photo Cell)c

4 Finish CHAR. GREY

5 Dist.

T5

Specification notes: a. Provided with 120/208/240/277V integral open core and coil ballast. b. Provided with 120-277V integral electronic ballast. c. PHC (Photo Cell) is not available for 150W variants.

Info notes: I. Enclosure is impact resistant acrylic.

II.The comparable EU version has the following classification: Ingress Protection Code: IP66.

III. Cutoff. A luminaire light distribution is designated as cutoff when the intensity per 1000 lamp lumens does not numerically exceed 25 (2.5%) at an angle of 90° above nadir (horizontal), and 100 (10%) at a vertical angle of 80° above nadir. This applies to any lateral angle around the luminaire. (In some cases the cutoff distribution may meet the requirements of the semicutoff distribution.)

LP Icon Wall Cutoff Design: Mads Odg책rd

LPI-MIN-CO-T3-1-150W-MH

LPI-MIN-CO-T5-1-150W-MH

wal l

33

LP Icon Mini Cable Hanger Full Cutoff

pendant

Design: Mads Odgård Page 36 Page 26

8.5”

9.8”

Page 28 Page 30

15.6”

34

Page 32

Page 44

Page 40

Page 46

Page 42

18.7”

s p e c i f i c a t i o n LP Icon Mini Cable Hanger Full Cutoff provides direct downward illumination. The reflector has been designed to provide a round symmetrical distribution of light.

LPI-MIN-FCO-T5-1150W-MH

LPI-MIN-FCO-T5SQ-1150W-MH

Finish Natural painted aluminum or charcoal grey, powder coated.

Material Enclosure: Light grey, injection molded opaque ASA. Reflector: Preanodized segmented high reflectance aluminum. Bottom enclosure: Silk screened heat tempered glass.

Housing: Die cast aluminum. Cable Compartment: Cast aluminum.

Hanging Hardware: stainless steel.

Ordering example: 1 2 Prod.code Light source LPI-MIN-P-FCO 1/150W/MH/ED-17

3 Volt.

120-277V CC

1

Product code LPI-MIN-P-FCO

2

Light source 1/70W/HPS/ED-17 medium a 1/100W/HPS/ED-17 medium a 1/150W/HPS/ED-17 medium a 1/70W/MH/ED-17 medium a,b 1/100W/MH/ED-17 medium a,b 1/150W/MH/ED-17 medium a

3

Voltage 120-277V CCa 120-277V EBb

Mounting Suspension type: Suspended from a through wiring cable hanger (CH).

4

Finish CHAR. GREY NAT. PAINT ALU.

Weight Max. 29 lbs.

5

Distribution T5 (Type V IES) T5SQ (Type V SQUARE)

6

Transition to pole CH (Cable Hanger)

7

Options QRS (Quartz Restrike)

Label cUL, Wet location. IBEW.

4 Finish CHAR. GREY

5 Dist.

T5

6 Trans CH

Specification notes: a. Provided with 120/208/240/277V integral open core and coil ballast. b. Provided with 120-277V integral electronic ballast.

Info notes: I. Enclosure is impact resistant ASA. II. The comparable EU version has the following classification: Ingress Protection Code: IP66.

III. Full Cutoff. A luminaire light distribution where zero candela intensity occurs at an angle of 90° above nadir, and all greater angles from nadir. Additionally, the candela per 1000 lamp lumens does not numerically exceed 100 (10%) at an angle 80° above nadir. This applies to all lateral angles around the luminaire.

LP Icon Mini Cable Hanger Full Cutoff Design: Mads Odg책rd

LPI-MIN-FCO-T5-1-150W-MH

LPI-MIN-FCO-T5SQ-1-150W-MH

pendant

35

LP Icon Mini Cable Hanger Cutoff

pendant

Design: Mads Odgård Page 34 Page 26

8.5”

9.8”

Page 28 Page 30

15.6”

36

Page 32

Page 44

Page 40

Page 46

Page 42

18.7”

s p e c i f i c a t i o n LP Icon Mini Cable Hanger Cutoff provides mainly direct downward illumination. The hemisphere is lit up from within and creates a soft diffuse upward light. The reflector has been designed to provide a round symmetrical distribution of light.

LPI-MIN-CO-T5-1150W-MH

LPI-MIN-CO-T5SQ-1150W-MH

Finish Natural painted aluminum or charcoal grey, powder coated.

Material Enclosure: White opal, injection molded translucent acrylic. Reflector: Pre-anodized segmented high reflectance aluminum. Bottom enclosure: Silk screened heat tempered glass. Housing: Die cast aluminum. Cable Compartment: Cast aluminum. Hanging Hardware: stainless steel.

Mounting Suspension type: Suspended from a through wiring cable hanger (CH).

Ordering example: 1 2 Prod.code Light source LPI-MIN-P-CO 1/150W/MH/ED-17

3 Volt.

120-277V CC

1

Product code LPI-MIN-P-CO

2

Light source 1/70W/HPS/ED-17 medium a 1/100W/HPS/ED-17 medium a 1/150W/HPS/ED-17 medium a 1/70W/MH/ED-17 medium a,b 1/100W/MH/ED-17 medium a,b 1/150W/MH/ED-17 medium a

3

Voltage 120-277V CCa 120-277V EBb

4

Finish CHAR. GREY NAT. PAINT ALU.

5

Distribution T5 (Type V IES)

T5SQ (Type V SQUARE)

Weight Max. 29 lbs.

6

Transition to pole CH (Cable Hanger)

Label cUL, Wet location. IBEW.

7

Options QRS (Quartz Restrike)

4 Finish CHAR. GREY

5 Dist.

T5

6 Trans CH

Specification notes: a. Provided with 120/208/240/277V integral open core and coil ballast. b. Provided with 120-277V integral electronic ballast.

Info notes: I. Enclosure is impact resistant acrylic.

II. The comparable EU version has the following classification: Ingress Protection Code: IP66.

III. Cutoff. A luminaire light distribution is designated as cutoff when the intensity per 1000 lamp lumens does not numerically exceed 25 (2.5%) at an angle of 90° above nadir (horizontal), and 100 (10%) at a vertical angle of 80° above nadir. This applies to any lateral angle around the luminaire. (In some cases the cutoff distribution may meet the requirements of the semicutoff distribution.)

LP Icon Mini Cable Hanger Cutoff Design: Mads Odg책rd

LPI-MIN-CO-T5-1-150W-MH

LPI-MIN-CO-T5SQ-1-150W-MH

pendant

37

38

LP Icon Mini Post Poles

R10.2"

poles

25.0"

25.0"

15.6"

15.6"

FABRICATED ALUMINUM POSTTOP ARM

STRAIGHT POSTTOP

(4) 1/4"-20 S.S. SET SCREWS AT 180∞ ON TWO ROWS, STAGGERED AT 90∞

9.3" MAX. SQUARE

Ø 8.0" BOLT CIRCLE 4 1/2" O.D. x 1/8" WALL EXTRUDED ALUMINUM TUBE ALLOY No. 6061-T6 POLE BASE DETAIL "H"

13.0"

CAST ALUMINUM SPLIT BASE COVER, ALLOY No. 319-F

CAST ALUMINUM SHOE BASE ALLOY No. 356-T6 4.0" 1 1/4" LEVELING GAP TO BE FILLED WITH GROUT, TO ASSIST IN PREVENTING MOISTURE FROM ENTERING POLE (BY OTHERS)

18.0"

(4) 3/4" x 24" HOT DIP GALVANIZED STEEL ANCHOR BOLTS ON A 8" BOLT CIRCLE, AT 90° PERIPHERALLY REINFORCED HAND HOLE, WITH GROUND LUG AND COVER

LP Icon Mini Post Poles

poles

EPA QUICK REFERENCE CHART: AREA OF SINGLE DAVIT ARM............= 0.5 sf.

AREA OF LUMINAIRES........................= 1.3 sf.

TOTAL AREA........................................ = 1.8 sf.

CATALOG No.

"H"

LPI-MIN-SRA

12'-0"

LPI-MIN-SRA

14'-0"

LPI-MIN-SRA

16'-0"

BOLTS PROJ.

3 1/2"

AREA OF SINGLE STRAIGHT ARM..... = 0.8 sf.

AREA OF LUMINAIRES........................ = 1.3 sf.

TOTAL AREA......................................... = 2.1 sf.

BOLTS CIRCLE

8.0" D.

EFFECTIVE PROJECTED AREA (EPA) IN SF AT: 110 MPH

80 MPH

90 MPH

100 MPH

7.1

5.3

4.2

3.4

7.6

6.3

3.5

2.6

1.9

5.8

3.6

2.1

1.4

0.9

70 MPH 9.8

TOTAL EPA OF POSTTOP ARM AND LUMINAIRE, MUST BE LESS THEN OR EQUAL TO EPA GIVEN FOR WIND VELOCITY ZONE

D a v i t ( D A V )

o r

S t r a i g h t

s p e c i f i c a t i o n

Pole Davit (DAV) Straight (SRA)

3

Height 12’ 14’ 16’

4

Finish CHAR. GREY NAT. PAINT ALU.

15.6"

2

12'/14'/16'

Product code LPI-Min

25.0"

25.0"

15.6"

1

4 Finish CHAR. GREY

12'/14'/16'

Ordering example: 1 2 3 Prod.code Pole Height LPI-Min DAV 12’

( S R A )

39

LP Icon Maxi Post Top Full Cutoff

post tops

Design: Mads Odgård Page 42 Page 30

8.7” Page 32 Page 34

21.2”

40

Page 36

Page 44

Page 26

Page 46

Page 28

26.0”

s p e c i f i c a t i o n

LPI-MAX-FCO-T3-1150W-MH

LP Icon Maxi Post Top Full Cutoff provides direct downward illumination.

Depending on the choice of reflector, the lighting characteristics will vary.

The reflector types have been designed to provide either asymmetrical or symmetrical distributions of light.

Ordering example: 1 2 Prod.code Light source LPI-MAX-PT-FCO 1/250W/MH/ED-28

1

Product code LPI-MAX-PT-FCO

2

Light source 1/150W/HPS/ED-23 1/2 mogula 1/250W/HPS/ED-28 mogula 1/150W/MH/ED-28 mogula 1/175W/MH/ED-28 mogula 1/250W/MH/ED-28 mogula

Finish Natural painted aluminum or charcoal grey, powder coated.

LPI-MAX-FCO-T5SQ-1150W-MH

Material Enclosure: Light grey, injection molded opaque ASA. Reflector: Preanodized segmented high reflectance aluminum. Bottom enclosure: Silk screened heat tempered glass.

Housing: Die cast aluminum.

Mounting Post Top: Mounted on davit (DAV), or straight (SRA) arm.

3 Volt.

120-277V CC

3

Voltage 120-277V CC

4

Finish CHAR. GREY NAT. PAINT ALU.

5

Distribution T3 (Type III IES)

T5SQ (Type V SQUARE) Weight Max. 43 lbs.

6

Transition to pole DAV SRA

7

Options

Label cUL, Wet location. IBEW.

HSS (House Side Shield)b PHC (Photo Cell) QRS (Quartz Restrike)

4 Finish CHAR. GREY

5 Dist.

T3

6 Trans SRA

Specification notes: a. Provided with 120/208/240/277V integral open core and coil ballast. b. HSS (House Side Shield) available only for T3 distribution.

Info notes: I. Enclosure is impact resistant ASA. II. For pole selection, refer to Pole Section.

III. The comparable EU version has the following classification: Ingress Protection Code: IP66.

IV. Full Cutoff. A luminaire light distribution where zero candela intensity occurs at an angle of 90° above nadir, and all greater angles from nadir. Additionally, the candela per 1000 lamp lumens does not numerically exceed 100 (10%) at an angle 80° above nadir. This applies to all lateral angles around the luminaire.

LP Icon Maxi Post Top Full Cutoff Design: Mads Odg책rd

LPI-MAX-FCO-T3-1-150W-MH

LPI-MAX-FCO-T5SQ-1-150W-MH

post tops

41

LP Icon Maxi Post Top Cutoff

post tops

Design: Mads Odgård Page 40 Page 30

8.7” Page 32 Page 34

21.2”

42

Page 36

Page 44

Page 26

Page 46

Page 28

26.0”

s p e c i f i c a t i o n

LPI-MAX-CO-T3-1-150WMH

LP Icon Maxi Post Top Cutoff provides mainly direct downward illumination.

The hemisphere is lit up from within and creates a soft diffuse upward light. Depending on the choice of reflector, the downward lighting characteristics will vary. The reflector types have been designed to provide either asymmetrical or symmetrical distributions of light.

Ordering example: 1 2 Prod.code Light source LPI-Max-CO 1/250W/MH/ED-28

1

Product code LPI-Max-CO

2

Light source 1/150W/HPS/ED-23 1/2 mogula 1/250W/HPS/ED-28 mogula 1/150W/MH/ED-28 mogula 1/175W/MH/ED-28 mogula 1/250W/MH/ED-28 mogula

Finish Natural painted aluminum or charcoal grey, powder coated.

LPI-MAX-CO-T5SQ-1150W-MH

Material Enclosure: White opal, injection molded translucent acrylic. Reflector: Pre-anodized segmented high reflectance aluminum. Bottom enclosure: Silk screened heat tempered glass. Housing: Die cast aluminum.

Mounting Post Top: Mounted on davit (DAV), or straight (SRA) arm.

3

Voltage 120-277V CC

4

Finish CHAR. GREY NAT. PAINT ALU.

5

Distribution T3 (Type III IES)

T5SQ (Type V SQUARE) 6

Transition to pole DAV SRA

7

Options

Weight Max. 43 lbs.

Label cUL, Wet location. IBEW.

3 Volt.

120-277V CC

HSS (House Side Shield)b PHC (Photo Cell) QRS (Quartz Restrike)

4 Finish CHAR. GREY

5 Dist.

T3

6 Trans SRA

Specification notes: a. Provided with 120/208/240/277V integral open core and coil ballast. b. HSS (House Side Shield) available only for T3 distribution.

Info notes: I. Enclosure is impact resistant acrylic.

II. For pole selection, refer to Pole Guide.

III. The comparable EU version has the following classification: Ingress Protection Code: IP66.

IV. Cutoff. A luminaire light distribution is designated as cutoff when the intensity per 1000 lamp lumens does not numerically exceed 25 (2.5%) at an angle of 90° above nadir (horizontal), and 100 (10%) at a vertical angle of 80° above nadir. This applies to any lateral angle around the luminaire. (In some cases the cutoff distribution may meet the requirements of the semicutoff distribution.)

LP Icon Maxi Post Top Cutoff Design: Mads Odg책rd

LPI-MAX-CO-T3-1-150W-MH

LPI-MAX-CO-T5SQ-1-150W-MH

post tops

43

LP Icon Maxi Cable Hanger Full Cutoff

pendant

Design: Mads Odgård Page 34 Page 26

8.5”

9.8”

Page 28 Page 30 Page 32

21.2”

44

Page 44

Page 40

Page 46

Page 42

26.0”

s p e c i f i c a t i o n LP Icon Maxi Cable Hanger Full Cutoff provides direct downward illumination. The reflector has been designed to provide a round symmetrical distribution of light.

LPI-MAX-FCO-T5SQ-1150W-MH

Ordering example: 1 2 Prod.code Light source LPI-MAX-P-FCO 1/250W/MH/ED-28

3 Volt.

120-277V CC

4 Finish CHAR. GREY

5 Dist.

T5SQ

6 Trans CH

1

Product code LPI-MAX-P-FCO

Specification notes: a. Provided with 120/208/240/277V integral open core and coil ballast.

2

Light source 1/150W/HPS/ED-23 1/2 mogula 1/250W/HPS/ED-28 mogula 1/150W/MH/ED-28 mogula 1/175W/MH/ED-28 mogula 1/250W/MH/ED-28 mogula

3

Voltage 120-277V CC

4

Finish CHAR. GREY NAT. PAINT ALU.

Info notes: I. Enclosure is impact resistant ASA. II. The comparable EU version has the following classification: Ingress Protection Code: IP66.

III. Full Cutoff. A luminaire light distribution where zero candela intensity occurs at an angle of 90° above nadir, and all greater angles from nadir. Additionally, the candela per 1000 lamp lumens does not numerically exceed 100 (10%) at an angle 80° above nadir. This applies to all lateral angles around the luminaire.

5

Distribution

Weight Max. 45 lbs.

6

Transition to pole CH (Cable Hanger)

Label cUL, Wet location. IBEW.

7

Options

Finish Natural painted aluminum or charcoal grey, powder coated.

Material Enclosure: Light grey, injection molded opaque ASA. Reflector: Preanodized segmented high reflectance aluminum. Bottom enclosure: Silk screened heat tempered glass.

Housing: Die cast aluminum. Cable Compartment: Cast aluminum.

Hanging Hardware: stainless steel.

Mounting Suspension type: Suspended from a through wiring cable hanger (CH).

T5SQ (Type V SQUARE)

QRS (Quartz Restrike)

LP Icon Maxi Cable Hanger Full Cutoff Design: Mads Odg책rd

LPI-MAX-FCO-T5SQ-1-150W-MH

pendant

45

LP Icon Maxi Cable Hanger Cutoff

pendant

Design: Mads Odgård Page 44 Page 26

8.5”

9.8”

Page 28 Page 30 Page 32

21.2”

46

Page 40

Page 34

Page 42

Page 36

26.0”

s p e c i f i c a t i o n LP Icon Maxi Cable Hanger Cutoff provides mainly direct downward illumination. The hemisphere is lit up from within and creates a soft diffuse upward light. The reflector has been designed to provide a round symmetrical distribution of light.

LPI-MAX-CO-T5SQ-1150W-MH

Finish Natural painted aluminum or charcoal grey, powder coated.

Material Enclosure: White opal, injection molded translucent acrylic. Reflector: Pre-anodized segmented high reflectance aluminum. Bottom enclosure: Silk screened heat tempered glass. Housing: Die cast aluminum. Cable Compartment: Cast aluminum. Hanging Hardware: stainless steel.

Ordering example: 1 2 Prod.code Light source LPI-MAX-P-CO 1/250W/MH/ED-28

3 Volt.

120-277V CC

5 Dist.

T5SQ

6 Trans CH

1

Product code LPI-MAX-P-CO

Specification notes: a. Provided with 120/208/240/277V integral open core and coil ballast.

2

Light source 1/150W/HPS/ED-23 1/2 mogula 1/250W/HPS/ED-28 mogula 1/150W/MH/ED-28 mogula 1/175W/MH/ED-28 mogula 1/250W/MH/ED-28 mogula

3

Voltage 120-277V CC

4

Finish CHAR. GREY NAT. PAINT ALU.

Info notes: I. Enclosure is impact resistant acrylic.

II. The comparable EU version has the following classification: Ingress Protection Code: IP66.

III. Cutoff. A luminaire light distribution is designated as cutoff when the intensity per 1000 lamp lumens does not numerically exceed 25 (2.5%) at an angle of 90° above nadir (horizontal), and 100 (10%) at a vertical angle of 80° above nadir. This applies to any lateral angle around the luminaire. (In some cases the cutoff distribution may meet the requirements of the semicutoff distribution.)

5

Distribution

Mounting Suspension type: Suspended from a through wiring cable hanger (CH).

6

Transition to pole CH (Cable Hanger)

Weight Max. 45 lbs.

7

Options

Label cUL, Wet location. IBEW.

4 Finish CHAR. GREY

T5SQ (Type V SQUARE)

QRS (Quartz Restrike)

LP Icon Maxi Cable Hanger Cutoff Design: Mads Odg책rd

LPI-MAX-CO-T5SQ-1-150W-MH

pendant

47

48

LP Icon Maxi Post Poles

poles

LP Icon Maxi Post Poles

poles

EPA QUICK REFERENCE CHART: AREA OF SINGLE STRAIGHT ARM........= 1.1 sf.

AREA OF LUMINAIRES...........................= 2.5 sf.

TOTAL AREA...........................................= 3.6 sf.

AREA OF SINGLE DAVIT ARM........= 0.6 sf.

AREA OF LUMINAIRES..................= 2.5 sf.

TOTAL AREA..................................= 3.1 sf.

CATALOG No.

"H"

LPI-MAX-SRA

18'-0"

LPI-MAX-SRA

20'-0"

BOLTS PROJ.

3 1/2"

BOLTS CIRCLE

EFFECTIVE PROJECTED AREA (EPA) IN SF AT:

8.5" D.

70 MPH

80 MPH

90 MPH

100 MPH

110 MPH

17.8

13.0

9.7

7.4

5.6

15.7

11.3

8.0

5.3

3.8

TOTAL EPA OF POSTTOP ARM AND LUMINAIRE, MUST BE LESS THEN OR EQUAL TO EPA GIVEN FOR WIND VELOCITY ZONE

D a v i t ( D A V )

o r

S t r a i g h t

s p e c i f i c a t i o n

Pole Davit (DAV) Straight (SRA)

3

Height 18’ 20’

4

Finish CHAR. GREY NAT. PAINT ALU.

21.2"

2

32.0"

18'/20'

Product code LPI-Max

32.0"

21.2"

1

4 Finish CHAR. GREY

18'/20'

Ordering example: 1 2 3 Prod.code Pole Height LPI-Max DAV 18’

( S R A )

49

LP Icon Mini. Hammarby Sjรถstad, Sweden. Specifier: Helena Bjรถrnberg and Victoria Mรถrk, Ljus & Gestaltning AB. Photo: Hรฅkansson & Mani.

Design: Louis Poulsen Lighting A/S / IMD 2004.05. Photo : Kaslov Studio, Udo Kowalski, Terry Renna. Lithography: Garn grafisk ApS. Print: Scanprint as.

Louis Poulsen Lighting, Inc. 3260 Meridian Parkway Fort Lauderdale, FL 33331 Tel.: 954-349-2525 Fax: 954-349-2550 info@louispoulsen.com www.louispoulsen.com