Catalogo torneado part 1 by DIHCSA

INNOVATIONS

MASTER CATALOG CUTTING TOOLS 2013

www.kennametal.com

STATIONARY TOOLS

TURNING

www.kennametal.com

Table of Contents Turning Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A0–A3 ISO/ANSI Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B0–B130

PCD/PCBN Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B132–B197

O.D./I.D. Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C0–C161

Grooving and Cut-Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D0–D161

Threading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E0–E107

Application Specific . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F0–F135

Turning Products Our latest Metalcutting Innovations are designed to deliver higher productivity, longer tool life, and increased application versatility.

ANSI/ISO INSERTS

TOOLHOLDERS

See Section B for more details.

See Section C for more details.

Carbide Inserts

Toolholders

NEW!

Beyond™ Technology

• Kenclamp™

• PVD Grades KCU10™/KCU25™

• Kenloc™

• CVD Grades

• Kenlever™

Ceramic Inserts NEW!

• Kendex™

Beyond Technology

Boring Bars

• KYK10 and KYK25 Ceramic Grades for CI

• Kenclamp

• KYS25 and KYS30 Ceramic Grades for High-Temp

• Kenloc

Superhard Inserts

• Kenlever

• CBN Inserts with Chipbreaker

• Kendex

Kennametal Select Insert Line

www.kennametal.com

For more information about the latest products and services from Kennametal, please contact your Kennametal Representative or Authorized Kennametal Distributor, or visit www.kennametal.com.

THREADING, GROOVING, AND CUT-OFF (TG&C)

APPLICATION SPECIFIC See Section F for more details.

See Sections D and E for more details.

A2™, A3™, and A4™ NEW!

Beyond Technology

Beyond BLAST ™

™

Fix-Perfect™

• KCU25™ PVD Grade

• CBN Inserts

Top Notch Profiling

• A4 Clubhead Toolholders

Tooling for Railroad

Top Notch Grooving and Threading ™

NEW!

Beyond Technology • KCU25 PVD Grade

• CBN Inserts LT Threading

www.kennametal.com

Turning Insert Selection Reference Guide Tool

ANSI/ISO Turning Inserts Step 1 • Select Insert Style

Kenloc™

Screw-On

Kendex™ Positive

Kendex Negative

Carbide: B38–B47 Ceramic: B116 Superhard: B172–B174

Carbide: B86–B93 Superhard: B185–B188

Carbide: B82 Superhard: B183

Ceramic: B120 Superhard: B180–B181

Carbide: B47–B56 Ceramic: B117 Superhard: B174–B176

Carbide: B93–B98 Superhard: B189–B192

—

Ceramic: B121 Superhard: B181

Carbide: B56–B57 Ceramic: B117

Carbide: B98–B100

Carbide: B82–B83 Ceramic: B126–B127

Ceramic: B122 Superhard: B180

Carbide: B57–B64 Ceramic: B118 Superhard: B176–B177

Carbide: B101–B104

Carbide: B83–B84 Ceramic: B127–B128

Ceramic: B123–B124 Superhard: B180, B182

Carbide: B64–B71 Ceramic: B118 Superhard: B177–B179

Carbide: B104–B110 Superhard: B192–B194

Carbide: B84–B85 Ceramic: B128 Superhard: B183–B184

Ceramic: B124 Superhard: B182

Carbide: B72–B76 Ceramic: B118 Superhard: B178–B179

Carbide: B111–B112 Superhard: B194–B195

—

Ceramic: B124

Carbide: B76–B81 Ceramic: B119 Superhard: B179

Carbide: B112–B113

—

Ceramic: B125

Threading, Grooving, and Cut-Off

Top Notch™ Threading

Top Notch Profiling

A4™

A3™

A2™

inserts

E44–E67

E10–E21

D126–D142

D78–D87

D30–D33

D12–D17

toolholders

E68–E80

E22–E39

D143–D154

D88–D117

D34–D58

D18–D24

Top Notch Profiling

Kendex Mini

K-Lock™

Railroad/Bar Peeling

Beyond BLAST™

Fix-Perfect™

inserts

F43–F48

F67

F61

F84–F87, F95–F97, F107–F109

F6–F9

F16–F30

toolholders

F49–F59

F68–F69

F62-F64

F72–F83, F89–F94, F99–F106

F10–F12

F32–F41

Application Specific

www.kennametal.com

Turning Insert Selection Reference Guide Tool

Step 2 • Select Application and Clamping System External Machining

Kenclamp™

Kenloc™

Kenlever™

Kendex™ Negative

Screw-On

Kendex Positive

conventional

C6–C7

C15–C19

—

C36, C38

C50–C56

C43

conventional

C8–C9

C20–C21

—

C36

C56–C58

—

conventional

C22

—

C39

C59–C61

—

conventional

C10–C11

C22–C24

—

C37, C40–C41

—

C44–C45

conventional

C11–C12

C25–C30

—

C42–C43

C61–C63

C46–C49

conventional

C13–C14

C30–C31

—

C64–C66

—

conventional

C14

C32

—

C37

C66–C67

—

Kenclamp

Kenloc

Kenlever

Kendex Negative

Screw-On

Kendex Positive

Internal Machining

conventional

C76–C77

C80–C81

—

C87

C94–C104

C90

conventional

C77–C78

C82–C83

—

C105–C107

—

conventional

—

C87–C88

—

conventional

C79

C83

—

C90

conventional

C79

C84

—

C89

C108–C113

C91–C93

conventional

—

C85

—

C114–C115

—

conventional

—

C85–C86

—

C87

C115–C118

—

www.kennametal.com

ISO/ANSI Inserts Kennametal Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B2–B23 Grades and Grade Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B24–B31 Chip Control Geometries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B32–B37 ISO/ANSI Carbide Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B38–B115 ISO/ANSI Ceramic Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B116–B130 Superhard Materials • PCBN/PCD Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B132–B197

www.kennametal.com

Inserts for Every Turning Operation Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert. Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits Up to 30% Higher Productivity and Profitability • Achieve higher metal removal rates (speed, feed, and depth of cut). • Gain longer tool life.

Versatility • Products can be applied across a wide range of applications. • Can be used in low- to high-speed applications.

Reliability • Deliver uniform wear for predictable tool life. • Achieve reduced depth-of-cut notching. • Virtually eliminate chip flow damage.

Complete Portfolio • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

www.kennametal.com

Technical Details • Features Post-Coat Treatment

Micro-Polished Edges

• Improves edge toughness.

• Long predictable tool life.

• Provides smooth outer surface to reduce forces, friction, and workpiece sticking.

• Reduces depth-of-cut notching. • Wide range of applications. • Reduces stresses. • Reduces microchipping. • Improves coating adhesion.

Fine-Grained Alumina Layer • Provides coating integrity at elevated speeds. • Higher productivity and dependability at high cutting temperatures.

www.kennametal.com

Post-Coat Grinding — Bottom • Provides secure seating surface.

Kennametal Inserts Catalog Numbering System

How Do Catalog Numbers Work? Each character in our catalog number signifies a specific trait of that product. Use the following key columns and corresponding images to easily identify which attributes apply.

CNMG432FP

Insert Shape

Insert Clearance Angle

Tolerance Class

Insert Features

Size

Hexagon 120°

Octagon 135°

Pentagon 108°

Tolerances apply prior to edge prep and coating

Code for inch cutting edge length “L10” inch 1.2 (5) 1.5 (6) 1.8 (7) – 2 2.5 – 3 – 3.5 – 4 4.5 5 – 5.5 6 – 7 – 8 10 –

C R

Rε

Round —

D S

Square 90°

Rε

E T C D E M V W

Triangular 60°

Rhomboid 80° 55° 75° 86° 35°

Trigon 80° with enlarged corner angles

Rectangular 90°

A Parallelogram 85° B 82° N/K 55°

D = Theoretical diameter of the insert inscribed circle S = Thickness B = See figures below

Special Design

“D” inch 5/32 3/16 7/32 .236 1/4 5/16 .315 3/8 .394 7/16 .472 1/2 9/16 5/8 .630 11/16 3/4 .787 7/8 .984 1 1-1/4 1.260

C S4 04 05 – 06 08 – 09 – 11 – 12 14 16 – 17 19 – 22 – 25 32 –

D 04 05 06 – 07 09 – 11 – 13 – 15 17 19 – 21 23 – 27 – 31 38 –

R 03 04 05 06 06 07 08 09 10 11 12 12 14 15 16 17 19 20 22 25 25 31 32

S 03 04 05 – 06 07 – 09 – 11 – 12 14 15 – 17 19 – 22 – 25 31 –

T 06 08 09 – 11 13 – 16 – 19 – 22 24 27 – 30 33 – 38 – 44 54 –

V – 08 09 – 11 13 – 16 – 19 – 22 24 27 – 30 33 – 38 – 44 54 –

W – S3 03 – 04 05 – 06 – 07 – 08 09 10 – 11 13 – 15 – 17 21 –

tolerance class

tolerance on “D”

tolerance on “B”

tolerance on “S”

±.0010"

±.0005"

±.001"

±.0005"

±.001"

±.0010"

±.001"

±.0010"

±.005"

See tables on the next page

±.005"

See tables on the next page

±.005"

Indicated for other clearance angles requiring descriptions.

www.kennametal.com

Kennametal Inserts Catalog Numbering System

By referencing this easy-to-use guide, you can identify the correct product to meet your needs. CNMG432FP

Thickness S

Corner Radius “Rε”

symbol inch

thickness inch

symbol inch

corner radius inch

.5 (1) .6 1 (2) 1.2 1.5 (3) 2 2.5 3 3.5 4 5 6 7 18

1/32 .040 1/16 5.64 3/32 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2

X0 0 .5 1 2 3 4 5 6 7 8 – –

.0015 .004 .008 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 round insert

Cutting Edge (optional)

Hand of Insert (optional)

Chipbreaker (optional)

F = Sharp

R = Right hand L = Left hand N = Neutral

Sharp

FF = Fine Finishing FN = Finishing Negative MN = Medium Negative

Rounded

RN = Roughing Negative UN = Universal Medium Chamfered

FP = Finishing Positive MP = Medium Positive

Chamfered and Rounded

RP = Roughing Positive RM = Roughing Medium RH = Roughing Heavy

Double-Chamfered

FW = Finishing Wiper MW = Medium Wiper

Double-Chamfered and Rounded

FS = Finishing Sharp MS = Medium Sharp RW = Roughing Wiper

± Tolerance on “D” Class M Tolerance

HP = High Positive

± Tolerance on “B”

Class U Tolerance

Class M Tolerance

Class U Tolerance

“D”

Shapes S, T, C, R, & W

Shape D

Shape V

Shapes S, T, & C

“D”

Shapes S, T, C, R, & W

Shape D

Shape V

Shapes S, T, & C

inch

5/32

.002

–

5/32

.003

–

UP = Universal Positive K = Light-Feed Chip Control

3/16

.002

–

.003

3/16

.003

–

.005

UF = Ultra-Fine Finishing

7/32

.002

.003

7/32

.003

.004

–

.005

LF = Light Finishing

1/4

.002

.003

1/4

.003

.004

–

.005

5/16

.002

.003

5/16

.003

.004

–

.005

3/8

.002

.003

3/8

.003

.004

.007

.005

7/16

.003

.005

7/16

.005

.006

–

1/2

.003

.005

1/2

.005

.006

.010

.008

9/16

.003

.005

9/16

.005

.006

–

5/8

.004

.007

5/8

.006

.007

–

.011

11/16

.004

.007

11/16

.006

.007

–

.011

3/4

.004

.007

3/4

.006

.007

–

.011

7/8

.005

–

.010

7/8

.006

–

.015

.005

–

.010

.007

–

.015

1 1/4

.006

–

.010

1 1/4

.008

–

.015

www.kennametal.com

MF = Medium Finishing E = Hone Only T = Negative Land S = Negative Land Plus Hone MP-K = Medium Positive MG-P = Medium Positive

Kennametal Inserts Grade Naming System

A system of grades, geometries, and application guidelines to provide optimal solutions for your metalcutting needs. It’s easy to determine which Kennametal chip-control cutting tool will work best in your specific workpiece materials and applications!

Grade • Beyond™

Brand

Insert Material

Primary Workpiece Material (ISO 513)

Secondary Workpiece Material (optional)

Application Range

Future Upgrades (optional)

K= Kennametal

A= Generation 1

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Materials S High-Temp Alloys H Hardened Materials U = Universal Machining

B= Generation 2 C= Generation 3

Blank = Carbide, uncoated

etc.

Hardest

C = Carbide, coated T = Cermet Y = Ceramic D = PCD B = PCBN S = Steel

fine finishing

finishing

15 20

medium to roughing

25 30 35

roughing

40 45 50

heaviest roughing

Toughest NOTE: Application range does not apply to PCBN grades.

Grade • Kenna Perfect™

Coating Type

Material Group

Wear Application Range/Toughness Range

9 = CVD (Chemical Vapor Deposition) 5 = PVD (Physical Vapor Deposition)

1= 2= 3= 4= 5= 6= 0=

P Steel M Stainless Steel K Cast Iron N Non-Ferrous Materials S High-Temp Alloys H Hardened Materials Universal Machining

Hardest

highly wear resistant

to 50

extremely tough

Toughest NOTE: Application range does not apply to PCBN grades.

www.kennametal.com

Kennametal Inserts Positive and Negative Inserts

Screw-On Inserts

Kenloc™ Inserts

• Screw-On inserts are your first choice for I.D. turning of all materials and O.D. turning on small to medium lathes.

• Kenloc inserts are your first choice for general machining of all materials on medium to large lathes.

• Available in flat-top and chip-control geometries with both molded and ground peripheries. Suitable for all workpiece materials. See pages: Carbide: B88–B115 Superhard: B187–B197

Inserts

Negative Inserts

Positive Inserts

• Kenloc inserts offer the best economy for high metal removal rates. • Available in flat-top and chip-control geometries with both molded and ground peripheries. Suitable for all workpiece materials. See pages: Carbide: B40–B83 Ceramic: B118–B121 Superhard: B187–B197

Kendex™ and V-Bottom Inserts • Kendex positive and V-bottom inserts are your first choice for productive machining of high-temperature alloys on medium to large lathes. • Available in flat-top geometries with ground periphery. See pages: Carbide: B84–B87 Ceramic: B128–B130 Superhard: B185–B186 See pages B128–B129 for V-bottom product listing.

Kendex Inserts • Ceramic Kendex inserts are a great choice for productive machining of high-temp alloys. • Kendex negative rake inserts are also recommended for the machining of hardened materials and cast irons. • Available in flat-top geometries with molded and ground peripheries. • Wide selection of standard toolholders are offered.

Top Notch™ Profiling Inserts

See pages B122–B127 for product listing.

• First choice for high-production profiling. • Unique insert clamping design offers superior rigidity. • Available in chip-control geometries with both molded and ground peripheries. Suitable for all workpiece materials. See pages F43–F48 for product listing.

Top Notch Turning Inserts • Ceramic Top Notch Turning inserts are your first choice for high-speed roughing and finishing of cast iron parts. • Available in flat-top geometries with molded and ground peripheries.

K-Lock™ Inserts

See pages B122–B127 for product listing.

• K-Lock inserts are ideal for deep grooving and profiling. • A unique insert clamping system allows for unimpeded chip flow. • Available in molded and ground peripheries. See page F61 for product listing.

www.kennametal.com

Kennametal Inserts Insert Selection System

Inserts

Insert Selection System How to Use Kennametal’s three-step insert selection system makes choosing and applying the most productive tool as easy as 1, 2, 3. Tool recommendations are based on six workpiece material groups, optimizing selection accuracy.

Example: Six workpiece material groups Step 1 • Select the insert geometry

Given: Unknown: Solution:

Step 2 • Select the grade

Given: Geometry: Unknown: Solution:

Step 3 • Select the cutting speed

Given:

Unknown: Solution:

depths of cut = .040" (1mm) feed = .016 IPR (0,4mm) insert geometry -MN

cutting conditions: lightly interrupted cut -MN grade KCP25

grade KCP25 cutting conditions AISI 1010 cutting speed 925 SFM (280 m/min)

Need help in selecting a product? Additional information can be obtained by contacting Kennametal’s Customer Application Support Team. Go to www.kennametal.com for your country’s phone number.

www.kennametal.com

Kennametal Inserts Insert Selection System

P M K N S H

Negative Inserts feed rate (mm/rev)

-FN Finishing

-MN Medium Machining

depth of cut (mm)

-RP* (positive) Roughing depth of cut (in)

-RN

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

Inserts

Step 1 • Select the insert geometry

feed rate (in/rev)

-FF Fine Finishing

*-RP – Supplemental geometry for high-strength materials

Step 2 • Select the grade cutting condition

-FF

-FN

-MN

-RN

-RP

-11

-UF

-LF

-FP

-MF

-MP

heavily interrupted cut

KCP10

KCP25 KCP30 KCP30/KCP40 KCP30/KCP40

—

KC5010/KCP25

KCP25

lightly interrupted cut

KCP10

KCP25 KCP25 KCP30/KCP40 KCP30/KCP40

—

KC5010/KCP25

KCP25

KCP25 KCP25

KCP10

KCP10 KCP10

varying depth of cut, casting, or forging skin

KCP05/KT315 KCP10 KCP10 KCP30/KCP40 KCP30/KCP40 KT315

KCU25/KCP25 KCP40 KCM25

Step 3 • Selecting the cutting speed Low-Carbon (<0,3% C) and Free-Machining Steel material grade group KCP05/KTP10 P1

135 (450)

180 (600)

225 (800)

speed — m/min (SFM) 275 320 360 (900) (1050) (1200)

starting conditions 410 (1350)

455 (1500)

495 (1650)

m/min 435

SFM 1450

KCP10

395

1320

KCP25

275

925

KCP30/KCP40

210

700

New Beyond™ Material Group Selection Guide: To optimize speed recommendations, Beyond material subgroups have been added to each of the six workpiece material groups.

material

material group ISO code

number of material subgroups

steel stainless steel cast iron non-ferrous materials high-temp alloys hardened materials

P M K N S H

1–6 1–3 1–3 1–8 1–4 1

www.kennametal.com

Kennametal Inserts • Beyond™ Steel • Carbon, Alloy, and Tool Steels up to 450 HB (48 HRC)

Step 1 • Select the insert geometry Negative Wiper Inserts

Positive Wiper Inserts feed rate (mm/rev)

feed rate (mm/rev)

-RW Rough Wiper

depth of cut (mm)

depth of cut (in)

depth of cut (mm)

depth of cut (in)

-MW Medium Wiper

-FW Finishing Wiper -FW Finishing Wiper

feed rate (in/rev)

Step 2 • Select the grade

Negative Insert Geometry

cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

Positive Insert Geometry

-FW – KCP10

-MW – KCP25

-RW KCP25 KCP25

KCP05/KT315

KCP10

KCP10/KCK20 KCP10/KCK20

KCP05/KT315

KCP05

KCP10

KCP10/KT315 KT315/KT315

-FW – KCP25

-MW KCP25 KCP25

Step 1 • Select the insert geometry Negative Inserts

Positive Inserts feed rate (mm/rev)

feed rate (mm/rev)

-RN

-RP* (positive) Roughing

-FP Positive Finishing

depth of cut (mm)

-LF

depth of cut (in)

-MN Medium Machining

-MP Positive Medium Machining depth of cut (mm)

-FN Finishing

-MF

depth of cut (in)

Inserts

feed rate (in/rev)

-FF Fine Finishing

feed rate (in/rev)

-11 -UF Fine Finishing

*-RP – Supplemental geometry for high-strength materials

Step 2 • Select the grade cutting condition

B10

-11

-UF

-LF

heavily interrupted cut

KCP10

-FF

KCP25 KCP30 KCP30/KCP40 KCP30/KCP40

-FN

-MN

-RN

-RP

—

KC5010/KCP25

KCP25

lightly interrupted cut

KCP10

KCP25 KCP25 KCP30/KCP40 KCP30/KCP40

—

KC5010/KCP25

KCP25

KCP25 KCP25

KCP10

KCP10 KCP10

varying depth of cut, casting, or forging skin

KCP05/KT315 KCP10 KCP10 KCP30/KCP40 KCP30/KCP40 KT315

KCP10

smooth cut, pre-turned surface

KCP05/KT315 KCP05 KCP05 KCP30/KCP40 KCP30/KCP40 KT315

KCP05

-FP

-MF

-MP

KCU25/KCP25 KCP40 KCM25

KCP05/KT315 KCP05/KTP10 KCP05 KCP05

www.kennametal.com

Kennametal Inserts • Beyond™ Steel • Carbon, Alloy, and Tool Steels up to 450 HB (48 HRC)

Low-Carbon (<0.3% C) and Free-Machining Steel material group grade KCP05/KTP10

P0/P1

www.kennametal.com

455 (1500)

495 (1650)

395

1320

275

925

KCP30/KCP40

210

700

KT315

440

1450

KCU10/KC5010

280

925

135 (450)

180 (600)

225 (800)

speed — m/min (SFM) 275 320 360 (900) (1050) (1200)

starting conditions 410 (1350)

455 (1500)

495 (1650)

m/min 240

SFM 800

KCP10

265

880

KCP25

195

650

KCP30/KCP40

150

500

KT315

270

880

KCU10/KC5010

200

650

135 (450)

180 (600)

225 (800)

speed — m/min (SFM) 275 320 360 (900) (1050) (1200)

starting conditions 410 (1350)

455 (1500)

495 (1650)

m/min 205

SFM 680

KCP10

190

630

KCP25

155

510

KCP30/KCP40

120

400

KT315

210

680

KCU10/KC5010

155

510

90 (300)

120 (400)

speed — m/min (SFM) 150 180 210 (500) (600) (700)

starting conditions 240 (800)

270 (900)

300 (1000)

m/min 160

SFM 530

KCP10

145

480

KCP25

105

360

KCP30/KCP40

325

KT315

210

530

KCU10/KC5010

110

360

180 (600)

speed — m/min (SFM) 210 240 270 (700) (800) (900)

starting conditions 300 (1000)

330 (1100)

360 (1200)

m/min 240

SFM 800

KCP10

215

720

KCP25

195

650

KCP30/KCP40

135

450

KT315

250

800

KCU10/KC5010

200

660

Ferritic, Martensitic, and PH Stainless Steels (340–450 HB) (36–48 HRC) material 105 135 grade group (350) (450) KCP05/KTP10

starting conditions 410 (1350)

KCP25

Ferritic, Martensitic, and PH Stainless Steels (≤330 HB) (≤35 HRC) material 120 150 grade group (400) (500) KCP05/KTP10

speed — m/min (SFM) 275 320 360 (900) (1050) (1200)

KCP10

Alloy Steels and Tool Steels (340–450 HB) (36–48 HRC) material 60 grade group (200) KCP05/KTP10

225 (800)

SFM 1450

Alloy Steels and Tool Steels (≤330 HB) (≤35 HRC) material grade group KCP05/KTP10

180 (600)

m/min 435

Medium- and High-Carbon Steels (>0.3% C) material grade group KCP05/KTP10

135 (450)

Inserts

Step 3 • Select the cutting speed

165 (550)

speed — m/min (SFM) 195 225 255 (650) (750) (850)

starting conditions 285 (950)

315 (1050)

345 (1150)

m/min 200

SFM 660

KCP10

180

600

KCP25

150

500

KCP30/KCP40

105

350

KT315

200

660

KCU10/KC5010

150

500

B11

Kennametal Inserts • Beyond™ Stainless Steel • Austenitic Stainless Steels

Step 1 • Select the insert geometry Negative Wiper Inserts

Positive Wiper Inserts feed rate (mm/rev)

feed rate (mm/rev)

depth of cut (in)

-FW Finishing Wiper

depth of cut (mm)

-MW Medium Wiper depth of cut (mm)

-MW Medium Wiper

-FW Finishing Wiper feed rate (in/rev)

feed rate (in/rev)

Step 2 • Select the grade Negative Insert Geometry cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

Positive Insert Geometry

-FW — KCM15

-MW — KCM25

-FW — KCM15

-MW — KCM15

KCM15/KCU10/KC5010

KCM15

KCU10/KC5010

KCM15/KT315

KCM15

KT315

Step 1 • Select the insert geometry Negative Inserts

Positive Inserts feed rate (mm/rev)

feed rate (mm/rev)

-RP

-P

-MP Medium Machining

Roughing

-FP

..GT-LF Finishing

-11

-FF

depth of cut (mm)

-LF

depth of cut (in)

-MP -UP Medium Machining

depth of cut (mm)

-MU1 -MS1 depth of cut (in)

Inserts

-UF

Fine Finishing

Finishing

feed rate (in/rev)

Step 2 • Select the grade Negative Insert Geometry cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

-FF KCU10/KC5010 KCU10/KC5010

-FP KCM15 KCM15

-MP/-UP KCM35 KCM25

-P/-RP KCM35 KCM25

KT315 KT315

KCM15/KC5010

KCM15

KCM15/KCM25

KCM15/KT315

KCM15/KU10

KCU10

(continued)

B12

www.kennametal.com

Kennametal Inserts • Beyond™ Stainless Steel • Austenitic Stainless Steels

Inserts

Step 2 • Select the grade (continued) Positive Insert Geometry cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

-11 — —

-UF KCU25/KC5025 KCU10/KC5010

-LF KCM35 KCM25

-MP/-MF KCM25 KCM25

-FP KCU25/KCM25 KCM15

KT315

—

KCM15/KCU10

KCM15

KCU10

KT315

—

KCM15/KT315

KCM15

KTP10

Step 3 • Select the cutting speed Austenitic Stainless Steel material group

Austenitic Stainless Steel material group

grade KCM15

90 (300)

135 (450)

180 (600)

www.kennametal.com

starting conditions 360 (1200)

405 (1350)

450 (1500)

m/min 180

SFM 600

KCM25

150

500

KCM35

120

400

KT315

230

750

KCU10/KC5010

215

700

KCU25/KC5025

180

550

grade KCM15

90 (300)

135 (450)

180 (600)

speed — m/min (SFM) 225 270 315 (800) (900) (1050)

starting conditions 360 (1200)

405 (1350)

450 (1500)

m/min 165

SFM 550

KCM25

140

450

KCM35

105

350

KT315

215

700

KCU10/KC5010

200

650

KCU25/KC5025

165

500

Austenitic Stainless Steel: Duplex (Ferritic and Austenitic Mixture) material 90 135 180 grade group (300) (450) (600) KCM15

speed — m/min (SFM) 225 270 315 (800) (900) (1050)

starting conditions 360 (1200)

405 (1350)

450 (1500)

m/min 150

SFM 500

KCM25

120

400

KCM35

300

KT315

200

650

KCU10/KC5010

185

600

KCU25/KC5025

150

450

B13

Kennametal Inserts • Beyond™

Step 1 • Select the insert geometry Negative Wiper Inserts

Positive Wiper Inserts feed rate (mm/rev)

feed rate (mm/rev)

-S...MW

-FW

depth of cut (mm)

..MW Medium Wiper

Medium Wiper

depth of cut (in)

-MW

depth of cut (in)

Inserts

Cast Iron • Gray and Ductile Irons • Wiper Inserts

-FW -T-20FW -FW Finishing Wiper

-FW -T-20FW Finishing Wiper

feed rate (in/rev)

Step 2 • Select the grade Gray Iron cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

Ductile Iron cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut casting, or forging skin smooth cut, pre-turned surface

B14

Negative Insert Geometry

Positive Insert Geometry

-FW — KCK15

-T-20FW KY3500 KY3500

-S...MW... KB1345 KB1345

-FW — KCK20

-MW KCK20 KCK20

KCK05/KT315

KYK10

KB1345

KCK20

KCK05/KT315

KYK25

KB1345

KCK20/KT315

KT315/KCK20

Negative Insert Geometry

Positive Insert Geometry

-FW — KCK15

-T-20FW— KY3500

-FW — KCK20

-MW — KCK20

KCK05/KT315

KYK10

KCK20

KCK05/KT315

KYK25

KCK20/KT315

www.kennametal.com

Kennametal Inserts • Beyond™ Cast Iron • Gray and Ductile Irons • Wiper Inserts

Gray Cast Iron material group

speed — m/min (SFM) grade KCK05

60 (200)

150 (500)

240 (800)

www.kennametal.com

510 (1700)

starting conditions 600 (2000)

690 (2300)

780 (2600)

SFM 1500

KCK15

360

1200

KCK20

300

1000

KT315

275

900

speed — m/min (SFM) 330 420 510 (1100) (1400) (1700)

starting conditions 600 (2000)

690 (2300)

780 (2600)

m/min 360

SFM 1200

KCK15

270

900

KCK20

240

800

KT315

275

900

Ductile, Compacted Graphite, and Malleable Cast Irons (>80 KSI tensile strength) material 60 150 240 group (200) (500) (800) grade KCK05 K3

420 (1400)

m/min 450

Ductile, Compacted Graphite, and Malleable Cast Irons (<80 KSI tensile strength) material 60 150 240 grade group (200) (500) (800) KCK05 K2

330 (1100)

Inserts

Step 3 • Select the cutting speed

speed — m/min (SFM) 330 420 510 (1100) (1400) (1700)

starting conditions 600 (2000)

690 (2300)

780 (2600)

m/min 240

SFM 800

KCK15

215

725

KCK20

210

700

KT315

230

750

B15

Kennametal Inserts • Beyond™

Step 1 • Select the insert geometry Negative Inserts

Positive Inserts feed rate (mm/rev)

-MF

-C -MP Medium Machining

depth of cut (mm)

-S-20 Roughing

-T-20

depth of cut (mm)

-T-20

depth of cut (in)

..MA -S-20

feed rate (mm/rev)

depth of cut (in)

Inserts

Cast Iron • Gray and Ductile Irons

-MP

-FP -MT

-RP

-UN

-T-20

-LF -MT

-T-20 Medium Machining

-FN

-T-20 Finishing

-FP feed rate (in/rev)

-MT Finishing

feed rate (in/rev)

-UF -11 Fine Finishing

-MT

* Geometry can be used in medium machining operations to reduce tool pressure in high-strength metals.

Step 2 • Select the grade

Carbide Grades

Gray Iron Negative Insert Geometry cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

Positive Insert Geometry

-FN KCK15 KCK15

-UN(-RP) KCK20 KCK20

-MA KCK20 KCK20

-LF KCK20 KCK20

-FP KCK20 KCK20

-MF KCK20 KCK20

-MP KCK20 KCK20

-MW KCK20 KCK20

KCK05/KT315

KCK15

KCK20

KCK15

KCK20

KCK05/KT315

KCK05

KCK20

KCK15

KCK20

Ductile Iron Negative Insert Geometry cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

-FN KCK15 KCK15 KCK05/KT315 KCK05/KT315

-UN(-RP) KCK20 KCK20 KCK15 KCK05

-MA KCK20 KCK20 KCK15 KCK05

-MP KCK20 KCK20

-MW KCK20 KCK20

Positive Insert Geometry cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

-11/-UF — KCU10/KC5010

-LF KCK20 KCK20

-MF KCK20 KCK20

-FP KCK20 KCK20

KCU10/KC5010

KCK15

KCK20

KT315

KCU10/KC5010

KCK15

KCK20

(continued)

B16

www.kennametal.com

Kennametal Inserts • Beyond™ Cast Iron • Gray and Ductile Irons

Inserts

Step 2 • Select the grade (continued) Ceramic and PCBN Grades Gray Iron

Negative Insert Geometry

cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

-T-20 Finishing KY3500 KY3500

MT KCK20 KB1345

-T-20 Medium KY3500 KYK10

-T-20 Roughing KY3500 KY3500

-S20 KB1340 KB1340

KYK10

KB1345

KYK10

KB1340

KYK25

KB1345

KYK25 KYK25 Positive Insert Geometry -T-20 Medium MT KY3500 KB1630/KB1345 KY3500 KB1630/KB1345 KY3500 KB1630/KB1345 KY3500 KB1630/KB1345

-T-20 Fine Finishing — — KY3500 KY3500

cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

C KB1630/KB1345 KB1630/KB1345 KB1630/KB1345 KB1630/KB1345

Positive Insert Geometry

Negative Insert Geometry

Ductile Iron

KB1340

-T-20 Finishing — —

-T-20 Medium KY3500 KYK25

-T-20 Roughing KY3500 KYK25

-T-20 Fine Finishing — —

-T-20 Finishing KY3500 KYK25

-T-20 Medium KY3500 KYK25

KYK25

Step 3 • Select the cutting speed (Optimal speed depends on casting quality and disposition.) Gray Cast Iron material group

speed — m/min (SFM) 60 (200)

grade KT315 KB1340/KB1345

180 (600)

www.kennametal.com

675 (2200)

800 (2600)

starting conditions 920 (3000)

1040 (3400)

1160 (3800)

m/min 275 760

SFM 900 2500

760

2500

760

2500

KYK10

760

2500

KCK05

450

1500

KCK15

360

1200

KCK20

300

1000

180 (600)

225 (750)

speed — m/min (SFM) starting conditions 275 320 360 410 460 500 550 600 m/min SFM (900) (1050) (1200) (1350) (1500) (1650) (1800) (1950) 275 900 200 650

KYK25

430

1400

KY3500

365

1200

KYK10

365

1200

KCK05

360

1200

KCK15

270

900

KCK20

240

800

grade KT315 KCU10/KC5010

550 (1800)

KYK25

Ductile, Malleable, and Austempered Cast Irons (>600 MPa tensile strength) material group

430 (1400)

KY3500

Ductile, Compacted Graphite, and Malleable Cast Irons (<600 MPa tensile strength) material 90 135 grade group (300) (450) KT315 KCU10/KC5010

305 (1000)

90 (300)

speed — m/min (SFM) 135 (450)

180 (600)

225 (750)

275 (900)

320 360 410 460 500 550 600 (1050) (1200) (1350) (1500) (1650) (1800) (1950)

starting conditions m/min 230 150

SFM 750 500

KYK25

365

1200

KCK05

240

800

KCK15

215

725

KCK20

210

700

B17

Kennametal Inserts • Beyond™

Step 1 • Select the insert geometry Negative Wiper Inserts

Positive Wiper Inserts feed rate (mm/rev)

feed rate (mm/rev)

..GA-E (PCD) Fine Finishing

..GW-F (PCD)

depth of cut (mm)

..GT-LF Finishing

depth of cut (in)

..MS-E ..GA-F (PCD) (PCD) Finishing

..GT-HP Medium Finishing depth of cut (mm)

..GP ..MS Medium Finishing depth of cut (in)

Inserts

Non-Ferrous Materials • Aluminum Alloys

..GW-E (PCD)

feed rate (in/rev)

Step 2 • Select the grade cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

Negative Insert Geometry ..GA-F (PCD) ..GP KD1400 KC5410/K313 KD1400 KC5410/K313

..GA-E (PCD) — KD1405

..MS-E (PCD) — KD1405

KD1405

KD1425

KD1405

KD1425

750 (2400)

1000 (3200)

..MS KC5410 KC5410

Positive Insert Geometry ..GW-E ..GW-F (PCD) (PCD) ..GT-LF ..GT-HP — KD1400 — KC5410 KD1405 KD1400 KC5410 KC5410

KC5410/K313

KC5410

KD1405

KD1425

KC5410

KC5410/K313

KC5410

KD1405

KD1425

KC5410

Step 3 • Select the cutting speed Low-Silicon Aluminum Alloys (hypoeutectic <12.2% Si) and Magnesium Alloys material 250 grade group (800) KC5410 N2 KD1400 High-Silicon Aluminum Alloys (hypereutectic >12.2% Si) and Magnesium Alloys material grade group KD1405 N3 KD1425

B18

500 (1600)

250 (800)

speed — m/min (SFM) 1250 1500 1750 (4000) (4800) (5600)

speed — m/min (SFM) 500 750 (1600) (2400)

starting conditions 2000 (6400)

2250 (7200)

2500 (8000)

m/min 550

SFM 1800

765

2500

starting conditions 1000 (3200)

m/min 580

SFM 2000

520

1700

www.kennametal.com

Kennametal Inserts • Beyond™ Non-Ferrous Materials • Miscellaneous Workpiece Materials

Copper-, Brass-, Zinc-Based on a Machinability Index Range of 70–100 material group

grade KD1400/ KD1405

250 (800)

KD1425

500

1600

KC5410

275

900

K313

260

850

grade KD1400/ KD1405

250 (800)

750 (2400)

starting conditions 1000 (3200)

SFM 1300

KD1425

365

1200

KC5410

170

550

grade KD1400/ KD1405

250 (800)

speed — m/min (SFM) 500 (1600)

750 (2400)

starting conditions 1000 (3200)

KC5410

grade KD1405

speed — m/min (SFM) 250 (800)

500 (1600)

750 (2400)

grade KC5410

www.kennametal.com

K313

speed — m/min (SFM) 250 (800)

500 (1600)

750 (2400)

m/min 760

SFM 2500

200

650

starting conditions 1000 (3200)

KD1400

Tin Alloys, Cast: ASTM 823, Alloys 1, 2, 3, 11 material group

speed — m/min (SFM) 500 (1600)

m/min 400

MMCs (Aluminum-Based Metal Matrix Composites) material group

starting conditions 1000 (3200)

SFM 1700

Carbon and Graphite Composites: Brush Alloys, Kevlar, and Graphite (280–400 HB) (30–43 HRC) material group

750 (2400)

m/min 520

Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass, and Glass material group

speed — m/min (SFM) 500 (1600)

Inserts

Additional Cutting Speed Recommendations for Miscellaneous Workpiece Materials

m/min 460

SFM 1500

365

1200

starting conditions 1000 (3200)

m/min 215

SFM 700

180

600

B19

Kennametal Inserts • Beyond™

Step 1 • Select the insert geometry Negative Inserts

Positive Inserts feed rate (mm/rev)

feed rate (mm/rev)

-UP Medium Machining

..GT-LF

R.GV

depth of cut (mm)

.NG

MT-FP R.GV-T Medium Machining depth of cut (in)

-MS

MT-LF

depth of cut (mm)

-RP Roughing depth of cut (in)

Inserts

High-Temp Alloys • Iron-, Cobalt-, and Nickel-Based and Titanium Alloys

..GT-HP Fine Finishing feed rate (in/rev)

feed rate (in/rev)

-FS Finishing

Step 2 • Select the grade Negative Insert Geometry cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

-FS KCU25/KC5525 KCU10/KC5510

.NG -MS — KCU25/KC5525 KYS30/KY1540 KCU25/KC5525 KYS30/KY1540/ KCU10/KC5510 KCU10/KC5510 KYS25/KY4300 KCU10/KC5510/ KCU10/KC5510 KYS25/KY4300 K313 K313

-UP KCM35 KCM25

-RP KCM25/KCM35 KCM15KC5525

KCM15

KCU25/KC5525

KCU10/KC5510

Positive Insert Geometry cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

B20

-FP KCU25 KCU25

..GT-HP — KCU25/KC5025

MT-LF KCU25/KC5025 KCU25/KC5025

KCU10/KU10

KCU10/KC5510

KCU10/KU10

KCU10/KC5510 K313

R.GV-T — KYS30/KY1540 KYS30/KY1540/ KYS25/KY4300 KYS25/KY4300

..GT-LF KCU25/KC5025 KCU25/KC5025 KCU10/KC5510 KCU10/KC5510 K313

R.GV — KYS30/KY1540 KYS30/KY1540/ KYS25/KY4300 KYS25/KY4300

www.kennametal.com

Kennametal Inserts • Beyond™ High-Temp Alloys • Iron-, Cobalt-, and Nickel-Based and Titanium Alloys

Iron-Based, Heat-Resistant Alloys (135–320 HB) (≤34 HRC) material group

grade K313/KU10

15 (50)

45 (150)

speed — m/min (SFM) 75 (250)

105 (350)

140 (450)

starting conditions 260 (850)

290 310 350 380 (950) (1050) (1150) (1250)

KCU10/KC5510/KC5010

180

KCU25/KC5525/KC5025

125

KYS25/KY4300

200

650

KYS30/KY1540

170

550

KCM15

180

KCM25/KCM35

125

grade K313/KU10

15 (50)

45 (150)

speed — m/min (SFM) 75 (250)

105 (350)

140 (450)

170 (550)

200 (650)

230 (750)

starting conditions 260 (850)

290 310 350 380 (950) (1050) (1150) (1250)

m/min 35

SFM 110

KC5510/KC5010

195

KC5525/KC5025

100

KYS25/KY4300

220

720

KYS30/KY1540

185

600

KCM15

195

KCM25/KCM35

100

grade K313/KU10

15 (50)

45 (150)

speed — m/min (SFM) 75 (250)

105 (350)

140 (450)

170 (550)

200 (650)

230 (750)

starting conditions 260 (850)

290 310 350 380 (950) (1050) (1150) (1250)

m/min 40

SFM 125

KCU10/KC5510/KC5010

225

KCU25/KC5525/KC5025

125

KYS25/KY4300

250

820

KYS30/KY1540

215

700

KCM15

225

KCM25/KCM35

125

Titanium and Titanium Alloys (110–450 HB) (≤48 HRC) material group

230 (750)

SFM 100

Nickel-Based, Heat-Resistant Alloys (140–475 HB) (≤48 HRC) material group

200 (650)

m/min 30

Cobalt-Based, Heat-Resistant Alloys (150–425 HB) (≤45 HRC) material group

170 (550)

grade K313/KU10

15 (50)

speed — m/min (SFM) 45 (150)

75 (250)

105 (350)

140 (450)

170 (550)

200 (650)

230 (750)

starting conditions 260 (850)

290 310 350 380 (950) (1050) (1150) (1250)

m/min 45

SFM 150

KC5510/KC5010/KC9225

225

KC5525/KC50225/KC9240

175

KCM15

225

KCM25/KCM35

175

www.kennametal.com

Inserts

Step 3 • Select the cutting speed

B21

Kennametal Inserts • Beyond™ Hardened Materials • Hardened Steels and Irons 450–750 HB (48–65 HRC)

Step 1 • Select the insert geometry Negative Wiper Inserts

Positive Wiper Inserts feed rate (mm/rev)

feed rate (mm/rev)

-S..FWMT (multitipped)

depth of cut (in)

depth of cut (mm)

depth of cut (in)

-EFWMT (multitipped)

depth of cut (mm)

-EFWC (full face) -EFWM (single tipped) Finishing Wiper

-S..MWMT (multitipped) Medium Wiper

-S..FWM (single tipped) -S..FWMT (multitipped) Fine Finishing Wiper

GA-FW

Finishing Wiper feed rate (in/rev)

Step 2 • Select the grade

feed rate (in/rev)

Negative Insert Geometry

cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

GA-FW — —

-S..FWMT KB5630 KB1610/KB5610

KY4400

KB1610/KB5610 KB1610/KB5610

KY4400

-EFWMT KB1625 KB5625

KB5610

Positive Insert Geometry -S..FWM -EFWC -S..FWMT -S..FWMT -EFWM — — — KB5610 KB1610 KB5610 KB5610

KB1610

KB5610

Step 1 • Select the insert geometry Negative Inserts

Positive Inserts feed rate (mm/rev)

feed rate (mm/rev)

-S-20 Medium Machining

-T.10 -T..10 -T.20 -T.20 Fine Finishing

feed rate (in/rev)

-T-20

depth of cut (mm)

-EC (full-face) -EM (single tipped) -EMT (multitipped) Finishing

depth of cut (in)

depth of cut (mm)

-S..ST (single tipped) -S..MT (multitipped) Finishing

-T-15 Medium Machining

depth of cut (in)

Inserts

-S....C (full face) -S....M (single tipped) -S....MT (multitipped)

feed rate (in/rev)

Fine Finishing

Step 2 • Select the grade cutting condition heavily interrupted cut lightly interrupted cut varying depth of cut, casting, or forging skin smooth cut, pre-turned surface

B22

Negative Insert Geometry -T.10 -S..ST -T.20 -S..MT -S-20 — KB1630/KB5630 KB1340 — KB1625/KB5625 KB1340

Positive Insert Geometry -S..C/-S..M -EC/-EM -S..MT -T-20 -EMT KB1630/KB5630 — KB1630/KB5630 KB1625/KB5625 KY4400 KB1625/KB5625

-T-15 — KY1615

KY1615/KY44O0 KB1625/KB5625

—

KB1625/KB5625

KY4400 KB1625/KB5625

KY1615

KY1615/KY44O0 KB1610/KB5610

—

KB1610/KB5610

KY4400 KB1610/KB5610

KY1615

www.kennametal.com

Kennametal Inserts • Beyond™ Hardened Materials • Hardened Steels and Irons 450–750 HB (48–65 HRC)

speed — m/min (SFM) material group

www.kennametal.com

grade KY4400

15 (50)

45 (150)

75 (250)

110 (350)

140 (450)

170 (550)

Inserts

Step 3 • Select the cutting speed starting conditions 200 (650)

230 (750)

260 (850)

m/min 135

SFM 450

KY1615

100

325

KB1610

140

460

KB1625

110

360

KB1630

295

KB5610

150

490

KB5625

120

400

KB5630

105

345

B23

Grades and Grade Descriptions

Inserts

Coatings provide high-speed capability and are engineered for finishing to heavy roughing.

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials wear resistance

Coating

Grade Description

KU10

Composition: A hard, low binder content, WC/Co fine-grain grade. Application: The KU10 grade has excellent abrasion resistance for machining cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temperature alloys. Use as a general-purpose grade for non-ferrous materials.

toughness

05 10 15 20 25 30 35 40 45

M K N S

Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade. Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.

K313

Uncoated Carbide Grades

M K N S

C3–C4

K68

Composition: A hard, low binder content, alloyed grade WC/Co fine-grain grade. Application: The K68 grade has excellent abrasion resistance for machining cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and as an alternative to the K313 grade on most high-temperature alloys. Use as a general-purpose grade for non-ferrous materials.

K N S

C3 P

KCU10

Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities. Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

K N S H

C3–C4

P Composition: An advanced PVD grade with hard AlTiN coating and fine-grain unalloyed substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities. Application: The KCU25 grade is ideal for general machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials in a wide range of speeds and feeds with improved edge toughness for interrupted cut and high feed rates.

KCU25

PVD-Coated Carbide Grades

M K N S

C2, C6 P M

KC5010

Composition: An advanced PVD AlTin coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%. Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials. C3–C4

B24

K N S H

www.kennametal.com

Grades and Grade Descriptions

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

Inserts

Coatings provide high-speed capability and are engineered for finishing to heavy roughing.

wear resistance

Coating

Grade Description

toughness

05 10 15 20 25 30 35 40 45 P

KC5025

Composition: An advanced PVD-AlTin-coated grade with a tough, fine-grain unalloyed substrate. Application: For general-purpose machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials. Speeds may vary from low to medium and will handle interruptions and high feed rates.

KC5410

Composition: A PVD TiB2 coating over a very deformation-resistant unalloyed substrate. Application: Designed for roughing, semi-finishing, and finishing of free machining (hypoeutectic <12.2% Si) aluminum, aluminum alloys, and magnesium alloys. The TiB2 coating is harder than TiN and TiAlN coatings and has an extremely smooth surface, resulting in reduced surface friction, speedy chip flow, and outstanding wear resistance. Built-up edge is prevented because this coating has a very low affinity for aluminum. The substrate is unalloyed and fine grained and offers sharp edges, smooth surfaces, and excellent thermal deformation resistance and edge integrity. Inserts with a ground periphery are polished before coating and have a sharp edge. Molded inserts have a light hone.

P Composition: An advanced PVD AlTin-coated fine-grain tungsten carbide grade. Application: The KC5510 grade is specifically engineered for the productive machining of high-temp alloys. The fine-grain tungsten carbide 6% cobalt substrate has excellent toughness and deformation resistance while the advanced PVD coating enables metalcutting speeds double those of conventional PVD-coated cutting tools.

KC5510

PVD-Coated Carbide Grades

K N S

C2, C6

C3–C4

M K N S

C3–C4 H P

KC5525

Composition: Advanced PVD AlTin-coated fine-grain high-cobalt carbide grade. Application: The KC5525 grade utilizes the same advanced PVD coating as the KC5510 grade in conjunction with a fine-grained tungsten carbide 10% cobalt substrate. The higher cobalt enables added security in interrupted cuts while the fine-grained WC maintains hardness-resisting deformation at higher speeds. Designed for medium to heavy interruptions in high-temp alloys.

M K N S

C2–C6 P

C3–C4 P

KCP10

CVD-Coated Carbide Grades

KCP05

Composition: An innovative, highly deformation-resistant, cobalt-enriched substrate with a specially designed, adherent MTCVD-TiCN-Al2O3 coating. Application: For finishing to semi-finishing of most steels, ferritic, martensitic, and PH stainless steels and cast irons. Provides excellent combination of deformation resistance and insert edge strength. The new coating combined with a state-of-the-art post-coat treatment provides high-productivity with long predictable tool life and superior workpiece surface finish.

C3, C7

www.kennametal.com

Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3 coating for maximum wear resistance. Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobaltenriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

B25

Grades and Grade Descriptions

Inserts

Coatings provide high-speed capability and are engineered for finishing to heavy roughing.

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials wear resistance

Coating

Grade Description

toughness

05 10 15 20 25 30 35 40 45 P

KCP25

Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion. Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimizes microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

C2–C3, C6–C7

KCP30

Composition: A newly engineered, tough cobalt-enriched carbide grade with an advanced multilayer TiN-MT-TiCN-Al2O3 coating. Application: For medium to rough machining of all carbon, alloy, and stainless steels. The substrate design provides superior insert strength that is required for this application, and the multilayer coating adds wear resistance to the insert resulting in long tool life. C5–C6 P

KCP40

Composition: A tough carbide grade with a moderately thick TiN-MT-TiCN-Al2O3 coating. Application: For heavy roughing of carbon, alloy, and stainless steels. The substrate-coating combination provides unbelievable toughness and operational security allowing high metal removal rates even in most demanding interrupted cuts. C5–C6 P Composition: A multilayered coating with moderately thick MTCVD TiCN-Al2O3 layers over a highly deformation-resistant carbide substrate. Application: Designed for high-speed machining of gray and ductile irons. The substrate and coating architecture together with CW5 post-coat treatment ensure a tremendous tool life advantage, especially when cutting higher tensile strength ductile and gray irons where workpiece size consistency and reliability of tool life are critical. Excellent both in straight and varied depths of cut.

KCK05

CVD-Coated Carbide Grades

C3–C4 P

KCK15

Composition: A multilayered coating with thick MTCVD TiCN-Al2O3 layers applied over a carbide substrate specifically engineered for cast irons. Application: Delivers consistent performance in high-speed machining of gray and ductile irons. The substrate design permits the insert to stay in the cut for a long time at high speeds with minimum deformation. The thick CVD coating and post-coat treatment provide superior wear resistance ensuring long and consistent tool life. Can be applied both in straight and lightly interrupted cuts.

C3–C4

KCK20

Composition: A specially toughened MTCVD-TICN-Al2O3 coating over a wear-resistant substrate. Application: The KCK20 grade is specifically engineered to maximize coating adhesion and edge strength making this grade ideal in wet interrupted cutting of gray and ductile irons. It can be used in a wide range of applications from finishing to roughing to maximize productivity wherever strength and reliability are needed.

C2–C3

B26

www.kennametal.com

Grades and Grade Descriptions

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

Inserts

Coatings provide high-speed capability and are engineered for finishing to heavy roughing.

wear resistance

Coating

Grade Description

toughness

05 10 15 20 25 30 35 40 45 P M

KCM15

Composition: A multilayer MTCVD-TiCN-Al2O3 coated carbide grade. Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the P20–25 range. KCM15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimize burr formation. The post-coat treatment reduces coating stresses, improves coating adhesion, minimizes microchipping and edge build-up, and improves workpiece finish.

P Composition: A multilayer CVD coating comprised of TiN-MT-TiCN-Al2O3 layers over a tough, cobalt-enriched carbide substrate. Application: This CVD-coated grade is designed for general-purpose machining of austenitic stainless steels at moderate speeds and feeds. KCM25 inserts offer an extraordinary combination of toughness, built-up edge resistance, and wear resistance in stainless steel applications.

KCM25

CVD-Coated Carbide Grades

C2–C3

C1–C2 P M

KCM35

Composition: A multilayer TiN-MT-TiCN-Al2O3 CVD coating over a super-tough substrate. Application: The KCM35 grade is engineered to take on the most brutal cast stainless steel machining applications. The substrate withstands heavy interruptions, while the coating provides the wear resistance needed for long tool life. The polished surface resists edge build-up, even at slow cutting speeds. KCM35 grade is available in insert sizes and geometries appropriate for heavy feeds and large depths of cut. C1–C2

KT315

Composition: A multilayer PVD-TiN/TiCN/TiN-coated cermet turning grade. Application: Ideal for high-speed finishing to medium machining of most carbon and alloy steels and stainless steels. Performs very well in cast and ductile iron applications, too. Provides long and consistent tool life and will produce excellent workpiece finishes.

C3, C7 P M Composition: A multilayer, PVD-TiN/TiCN/TiN-coated cermet turning grade. Application: Ideal for high-speed finishing to medium machining of most carbon and alloy steels and stainless steels. Performs very well in cast and ductile iron applications, too. Provides long and consistent tool life and will produce excellent workpiece finishes.

KTP10

PVD-Coated Cermet Grades

C3, C7

www.kennametal.com

B27

Grades and Grade Descriptions

Inserts

Coatings provide high-speed capability and are engineered for finishing to heavy roughing.

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials wear resistance

Coating

Grade Description

toughness

05 10 15 20 25 30 35 40 45

KYS25

Composition: SiAlON ceramic with a multi-layered alumina-TiCN CVD coating. Application: Compliments the KYS30 grade when machining high-temp and nickel-based alloys and cast materials with high Brinell hardness. This advanced CVD coating provides excellent chemical and depth-of-cut notch resistance compared to whisker ceramics. S C4 H

Ceramic Grades

KYS30

Composition: Latest and most advanced sialon material developed. Application: Combines excellent wear properties, fracture toughness, and thermal shock resistance for general-purpose to finish machining of high-temp alloys. Provides superior depth-of-cut notch resistance compared to whisker ceramics. S C4

KYK10

Composition: An advanced sialon ceramic grade. Application: Provides maximum wear resistance. Use for high-speed continuous turning of gray cast iron, including through scale.

â&#x20AC;&#x201D;

KYK25

Composition: Pure silicon nitride ceramic with an alumina CVD coating. Application: Excellent combination of toughness and edge wear resistance. Used for generalpurpose machining of gray, ductile, or nodular cast irons.

B28

www.kennametal.com

Grades and Grade Descriptions

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

Inserts

Coatings provide high-speed capability and are engineered for finishing to heavy roughing.

wear resistance

Coating

toughness

05 10 15 20 25 30 35 40 45

Grade Description

KY4300

M Composition: Whisker ceramic with a matrix of AI2O3 + SiCW. Application: The SiC whiskers embedded in the micro structure give this ceramic excellent toughness for cutting high-temp alloys and cast materials with high Brinell hardness. S

KY3500

Composition: Pure silicon nitride grade. Application: Maximum toughness. Used at high-feed rates for rough machining of gray cast iron, including machining through interruptions.

Composition: A PVD TiN coating over an aluminum oxide and titanium carbonitride composite ceramic (Al2O3/TiCN). Application: Used for finish turning of hardened steels and irons (greater than 45 HRC). Where possible, use under dry conditions in smooth or varied depths of cut. Can also be applied in finish turning of nickel alloys, cobalt alloys, and powder metals.

KY4400

Ceramic Grades

C4, C8

KB1340

Composition: A high CBN content, solid PCBN insert having multiple cutting edges. Application: Applied in roughing to finishing of fully pearlitic gray cast iron, chilled irons, highchrome alloyed steels, sintered powdered metals, and heavy cuts in hardened steels (>45 HRC). Also use for finishing chilled cast iron and fully pearlitic cast iron. The solid PCBN insert offers better security and shock resistance compared to tipped PCBN inserts, while also enabling deeper depth-of-cut capabilities.

—

KB1345

Composition: A high CBN content, PCBN tip brazed onto a carbide insert. Application: Applied in roughing to finishing of fully pearlitic gray cast iron, chilled irons, high-chrome alloyed steels, sintered powdered metals, and heavy cuts in hardened steels (>45 HRC). Also use for finishing chilled cast iron and fully pearlitic cast iron. The tipped PCBN insert is available in a wide range of insert styles including positive rake geometries that are ideally suited for boring applications.

— H

Composition: A low CBN content, PCBN tip brazed onto a carbide insert. Application: Designed for precision finishing in smooth cuts on hardened steels (>45 HRC) where optimal surface finish is needed. Use on bearing steel, hot and cold work tool steels, high-speed steels, die steels, case hardened steels, carburized and nitrided irons, and some hard coatings. Do not apply on soft steel.

KB1610

PCBN – Polycrystalline Cubic Born Nitride Grades

— H

www.kennametal.com

B29

Grades and Grade Descriptions

Inserts

Coatings provide high-speed capability and are engineered for finishing to heavy roughing.

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials wear resistance

Coating

Grade Description

toughness

05 10 15 20 25 30 35 40 45

KB1625

Composition: A medium CBN content, PCBN tip brazed onto a carbide insert. Application: Designed for roughing to finishing of hardened steels (>45 HRC) where optimal surface finish is needed. It can be used in continuous to interrupted cutting of bearing steel, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburized and nitrided irons, and some hard coatings. — H

KB1630

Composition: A high CBN content, PCBN tip brazed onto a carbide insert. Application: Designed for roughing to finishing in interrupted cuts on hardened steels (>45 HRC). It can also be applied on gray cast iron, chilled irons, high-chrome alloyed steels and sintered powdered metals. The tipped PCBN insert is available in a wide range of insert styles, including positive rake geometries, that are ideally suited for boring applications.

KB5610

Composition: A low content PCBN grade with a PVD TiAlN coating for added wear resistance. Application: Designed for the precision machining of hardened steels (>45 HRC). The PVD coating offers improved wear resistance and excellent surface finish capabilities. It can be very effectively applied on bearing steels, hot and cold work tool steels, high-speed steels, die steels, casehardened steels, carburized and nitrided irons, and some hard coatings. Available in a multitip format with a tremendous breadth of edge preps, insert styles, and wiper geometries. H

C4, C8

Composition: A PVD TiAlN coating over a medium content, PCBN tip brazed onto a carbide insert. Application: Designed for roughing to finishing of hardened steels (>45 HRC). Use on bearing steel, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburized and nitrided irons, and some hard coatings.

KB5625

PCBN – Polycrystalline Cubic Born Nitride Grades

S —

C4, C8 H

KB5630

Composition: A high content PCBN grade with a PVD AlTiN coating for added wear resistance. Application: Designed for roughing to finishing in hardened steels (>45 HRC), abrasive workpiece materials such as sintered valve seat materials, powder metallurgy tool steels, and hard high-alloy cast irons. The PVD coating provides resistance to crater wear and increased resistance to chipping. The tipped PCBN insert is available in a wide range of insert styles, including positive rake geometries, that are ideally suited for boring applications. C4, C8

B30

S H

www.kennametal.com

Grades and Grade Descriptions

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

Inserts

Coatings provide high-speed capability and are engineered for finishing to heavy roughing.

wear resistance

Coating

KD1400

Grade Description

toughness

05 10 15 20 25 30 35 40 45

Composition: An ultra-fine-grain, polycrystalline diamond (PCD) tip brazed onto a carbide substrate. Application: Designed for general-purpose turning of primarily non-ferrous materials. It can be applied over a wide range of continuous to interrupted cuts where superior surface finish is needed. Use on low to medium silicon-content aluminum alloys, non-metallics, copper, and brass- and zincbased alloys. The ultra-fine-grain diamond particle size enables superior surface finishes while ensuring the best mechanical shock resistance of any PCD cutting tool.

Composition: A pure CVD-deposited diamond-sheet tool brazed directly to a carbide substrate. Application: KD1405 is Kennametal’s most abrasion-resistant tool material for non-ferrous and non-metallic materials. Best applied when abrasion resistance is the desired benefit.

KD1405

S —

Composition: A multimodal PCD grade with a range of grain sizes brazed onto a carbide substrate. Application: Engineered for extreme abrasion resistance, combined with good edge strength for demanding applications. An ideal choice for high-silicon aluminum alloys, bi-metallic (AL/GCI) materials, MMC, carbon-fiber reinforced plastics, and other abrasive non-metallic materials.

KD1425

PCD – Polycrystalline Diamond Grades

—

www.kennametal.com

B31

Chip Control Geometries Overview

Inserts

Select the geometry — based on feed rate and depth of cut

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

feed rate — in (mm)

operation

medium machining

insert style application

insert geometry

.0015 .0025 .004 (0,04) (0,063) (0,01)

.006 (0,16)

.010 (0,25)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.200 (5,0)

.004 (0,1)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.160 (4,0)

.250 (6,3)

.500 (10,0)

.006 (0,16)

.010 (0,25)

profile

depth of cut — in (mm) .006–.020 (0,2–0,5)

MG-MP .030–.200 (0,8–5,1)

Feed Rate Range — for best results, use the center 60% of the range

Pictorial View of Insert

Depth-of-Cut Range — for all inserts in the program, select smaller inserts for lighter cuts and larger inserts for heavy cuts

Chipbreaker Geometry — section is through nose radius of insert

Primary Workpiece Material Group P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

Chip Control Geometry Designation — example: MG-MP = CNMG-432MP

Machining Operation — for what the insert geometry is designed

NOTE: For detailed grade and geometry recommendations, reference the Kennametal Beyond™ Selection System on pages B8–B23.

B32

www.kennametal.com

Chip Control Geometries Kenloc™ Inserts

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

Inserts

Select the geometry — based on feed rate and depth of cut

feed rate — in (mm)

operation

insert style application

insert geometry

.0015 .0025 .004 (0,04) (0,063) (0,01)

.006 (0,16)

.010 (0,25)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.200 (5,0)

.004 (0,1)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.160 (4,0)

.250 (6,3)

.500 (10,0)

.006 (0,16)

profile

.010 (0,25)

depth of cut — in (mm) .008–.016 (0,2–0,4)

MG-FW .010–.080 (0,3–2,0) wiper finishing .004–.016 (0,1–1,5) MG-FW1 .004–.060 (0,1–1,5) .012–.024 (0,3–0,6) MG-MW .030–.200 (0,8–5,1)

wiper medium machining

.006–.020 (0,15–0,5) MG-MW1 .020–.119 (0,5–3)

wiper roughing

.010–.050 (0,3–1,3) MM-RW .050–.500 (1,3–12,7) .002–.010 (0,1–0,3)

fine finishing

MG-FF

finishing sharp

GG-FS precision ground

finishing

GG-LF precision ground

.003–.080 (0,1–2,0)

www.kennametal.com

.003–.010 (0,07–0,25) .008–.080 (0,20–2,0) .005–.020 (0,1–0,5) .020–.120 (0,5–3,0)

B33

Chip Control Geometries Kenloc™ Inserts

Inserts

Select the geometry — based on feed rate and depth of cut

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

feed rate — in (mm)

operation

insert style application

insert geometry

profile

.0015 .0025 .004 (0,04) (0,063) (0,01)

.006 (0,16)

.010 (0,25)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.200 (5,0)

.004 (0,1)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.160 (4,0)

.250 (6,3)

.500 (10,0)

.006 (0,16)

.010 (0,25)

depth of cut — in (mm) .004–.012 (0,1–0,3)

MG-FP .010–.100 (0,3–2,5) .002–.010 (0,05–0,25) MG-FH .010–.040 (0,25–1) .005–.012 (0,1–0,3) finishing

MG-FN .010–.100 (0,3–2,5) .003–.009 (0,07–0,22) MG-FX .008–.040 (0,2–1) .004–.012 (0,1–0,3) MP-K .008–.100 (0,2–2,5) .006–.020 (0,15–0,5) MG-MH .012–.079 (0,3–2)

medium machining .006–.014 (0,15–0,35) MG-MX .020–.060 (0,5–1,5)

medium sharp

B34

.005–.014 (0,12–0,35) MG-MS .030–.200 (0,76–5,0)

www.kennametal.com

Chip Control Geometries Kenloc™ Inserts

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

Inserts

Select the geometry — based on feed rate and depth of cut

feed rate — in (mm)

operation

insert style application

insert geometry

.0015 .0025 .004 (0,04) (0,063) (0,01)

.006 (0,16)

.010 (0,25)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.200 (5,0)

.004 (0,1)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.160 (4,0)

.250 (6,3)

.500 (10,0)

.006 (0,16)

.010 (0,25)

profile

depth of cut — in (mm) .008–.025 (0,2–0,6)

MG-UP .040–.250 (1–6,4) .012–.020 (0,1–0,35) __GP* .060–.125 (0,5–3,2) .006–.020 (0,2–0,5) MG-MP .030–.200 (0,8–5,1) .006–.020 (0,15–0,5) MG-P .030–.200 (0,75–5,0) .006–.020 (0,2–0,5) medium machining

MG-MN .020–.200 (0,5–5,1) .005–.020 (0,13–0,5) MG-CT O.D. turning

.040–.115 (1,0–3,0) .010–.020 (0,25–0,5)

MG-CT outward facing

.010–.040 (0,25–1,0)

.006–.015 (0,2–0,4) -MS single sided

.025–.090 (0,6–2,3) .008–.020 (0,2–0,5)

MG-UN

.030–.150 (0,8–3,8)

*35˚ and 55˚ geometries are single sided.

www.kennametal.com

B35

Chip Control Geometries Kenloc™ Inserts

Inserts

Select the geometry — based on feed rate and depth of cut

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

feed rate — in (mm)

operation

insert style application

insert geometry

profile

.0015 .0025 .004 (0,04) (0,063) (0,01)

.006 (0,16)

.010 (0,25)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.200 (5,0)

.004 (0,1)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.160 (4,0)

.250 (6,3)

.500 (10,0)

.006 (0,16)

.010 (0,25)

depth of cut — in (mm) .008–.025 (0,2–0,6)

MG-RP .045–.250 (1,1–6,4) roughing .010–.025 (0,3–0,63) MG-RN .045–.250 (1,1–5,7) .012–.030 (0,3–0,8) MG .045–.225 (1,1–5,7) .010–.040 (0,3–1,0)

MM-RM single sided

.050–.500 (1,3–12,7)

heavy roughing .008–.030 (0,2–1,0) MM-RP .050–.400 (1,3–10,0)

MM-RH single sided

wiper finishing

wiper, medium finishing

B36

.015–.050 (0,4–1,3) .050–.500 (1,3–12,7) .003–.013 (0,1–0,3)

MT-FW .008–.060 (0,2–1,5) .005–.020 (0,1–0,5) MT-MW .016–.130 (0,4–3,3)

www.kennametal.com

Chip Control Geometries Screw-On Inserts

P M K N S H

Steel Stainless Steel Cast Iron Non-Ferrous Materials High-Temp Alloys Hardened Materials

Inserts

Select the geometry — based on feed rate and depth of cut

feed rate — in (mm)

operation

insert style application

insert geometry

.0015 .0025 .004 (0,04) (0,063) (0,01)

.006 (0,16)

.010 (0,25)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.200 (5,0)

.004 (0,1)

.016 (0,4)

.025 (0,63)

.040 (1,0)

.060 (1,6)

.100 (2,5)

.160 (4,0)

.250 (6,3)

.500 (10,0)

.006 (0,16)

profile

depth of cut — in (mm) .002–.008 (0,1–0,2)

__GM precision ground

fine finishing

.010 (0,25)

.008–.040 (0,2–1,0) .003–.010 (0,1–0,3)

MT-11 .008–.050 (0,2–1,3) .002–.010 (0,1–0,3) .MT-UF .005–.050 (0,1–1,3) .007–.015 (0,2–0,4)

GT-HP precision ground

.025–.090 (0,6–2,3) .007–.015 (0,2–0,4)

GT-LF precision ground

.030–.090 (0,8–2,3)

finishing .0025–.010 (0,063–0,25) MT-FP .006–.060 (0,16–1,6) .007–.015 (0,2–0,4) MT-LF .030–.090 (0,8–2,3) .004–.016 (0,01–0,4) MT-MP .016–.130 (0,4–2,3) medium machining .009–.017 (0,2–0,4) MT-MF .045–.090 (1,1–2,3)

www.kennametal.com

B37

Carbide Inserts Primary Application Kennametal offers a complete portfolio of ISO-/ANSI-style inserts. Positive, negative, CVD, PVD, or uncoated, we have the insert to help increase productivity and achieve greater savings. Plus, our carbide insert line contains Beyond™ technology. Beyond inserts offer you greater versatility, reliability, and up to 30% higher productivity.

Beyond™ CVD Grades

Beyond™ PVD Grades

• Higher productivity and profitability — up to 300% higher.

KCU10™

• Lower cutting forces — Increase speeds and reduce cycle time.

• PVD-coated grade with superior wear resistance at elevated temperatures, allowing higher metal cutting speeds.

• Extended tool life. • Predictable tool life / Uniform wear.

• For use in all materials, especially stainless steels and high-temp alloys.

• Resists chip flow damage.

• Improved depth-of-cut notch resistance

• Consistent surface finish.

• Increase speed by 20–30% or feed by 10–15%.

• Products can be applied across a wide range of applications.

• Use in finishing to medium applications.

• Use it in low speed to high speed applications. • For finish to rough turning of steel, cast iron, stainless steel, and high temp alloy turning.

KCU25™ • PVD-coated grade with superior edge toughness and excellent wear resistance. Medium to roughing applications. • Use in all materials. • Increase speed, feed, and depth of cut by 10–20%.

B38

www.kennametal.com

B39

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number CNGG120404FBB CNGG120408FBB

ANSI catalog number CNGG431FBB CNGG432FBB

L10

Rε

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CNGG-FBB

v v

CNGG-FS D

L10

Rε

ISO catalog number CNGG120401FS CNGG120402FS

ANSI catalog number CNGG430FS CNGG4305FS

mm in mm in mm in 12,70 1/2 12,90 .508 0,1 .004 12,70 1/2 12,90 .508 0,2 .008

CNGG120404FS CNGG120408FS

CNGG431FS CNGG432FS

12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

CNGG120412FS

CNGG433FS

12,70 1/2 12,90 .508 1,2 3/64

v v

CNGG-LF D

L10

Rε

ISO catalog number CNGG120401LF CNGG120402LF

ANSI catalog number CNGG430LF CNGG4305LF

mm in mm in mm in 12,70 1/2 12,90 .508 0,1 .004 12,70 1/2 12,90 .508 0,2 .008

CNGG120404LF CNGG120408LF

CNGG431LF CNGG432LF

12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

CNGG120412LF CNGG160608LF

CNGG433LF CNGG542LF

12,70 1/2 12,90 .508 1,2 3/64 15,88 5/8 16,12 .635 0,8 1/32

v v

CNGG160612LF

CNGG543LF

15,88 5/8 16,12 .635 1,2 3/64

v v

v v v v

v v

CNGP D

L10

Rε

ISO catalog number CNGP120401 CNGP120402

ANSI catalog number CNGP430 CNGP4305

mm in mm in mm in 12,70 1/2 12,90 .508 0,1 .004 12,70 1/2 12,90 .508 0,2 .008

CNGP120404 CNGP120408

CNGP431 CNGP432

12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

CNGP120412 CNGP120416

CNGP433 CNGP434

12,70 1/2 12,90 .508 1,2 3/64 12,70 1/2 12,90 .508 1,6 1/16

B40

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CNMA

ISO catalog number CNMA120404 CNMA120408

ANSI catalog number CNMA431 CNMA432

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

CNMA120412 CNMA120416

CNMA433 CNMA434

12,70 1/2 12,90 .508 1,2 3/64 12,70 1/2 12,90 .508 1,6 1/16

CNMA160608 CNMA160612

CNMA542 CNMA543

15,88 5/8 16,12 .635 0,8 1/32 15,88 5/8 16,12 .635 1,2 3/64

CNMA160616 CNMA190608

CNMA544 CNMA642

15,88 5/8 16,12 .635 1,6 1/16 19,05 3/4 19,34 .762 0,8 1/32

v v v

CNMA190612 CNMA190616

CNMA643 CNMA644

19,05 3/4 19,34 .762 1,2 3/64 19,05 3/4 19,34 .762 1,6 1/16

v v v

v v v v v v

v v

v v v

v v v v v v v v

CNMG D

L10

Rε

ISO catalog number CNMG120404B CNMG120408

ANSI catalog number CNMG431 CNMG432

mm in mm 12,70 1/2 12,90 12,70 1/2 12,90

in mm in .508 0,4 1/64 .508 0,8 1/32

CNMG120412 CNMG160612

CNMG433 CNMG543

12,70 1/2 12,90 15,88 5/8 16,12

.508 1,2 3/64 .635 1,2 3/64

CNMG190608 CNMG190612

CNMG642 CNMG643

19,05 3/4 19,34 19,05 3/4 19,34

.762 0,8 1/32 .762 1,2 3/64

CNMG190616 CNMG250924

CNMG644 CNMG866

19,05 3/4 19,34 .762 1,6 1/16 25,40 1 25,79 1.015 2,4 3/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

v v v v v

C130–C161

B10–B23

v v

B24–B31

B32–B37

B41

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v

L10

Rε

ISO catalog number CNMG120408CT CNMG120412CT

ANSI catalog number CNMG432CT CNMG433CT

mm in mm in mm in 12,70 1/2 12,90 .508 0,8 1/32 12,70 1/2 12,90 .508 1,2 3/64

CNMG120416CT

CNMG434CT

12,70 1/2 12,90 .508 1,6 1/16

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CNMG-CT

v v v

v v

v v v v

CNMG-FF D

L10

Rε

ISO catalog number CNMG090304FF CNMG090308FF

ANSI catalog number CNMG321FF CNMG322FF

mm in mm in mm in 9,53 3/8 9,67 .381 0,4 1/64 9,53 3/8 9,67 .381 0,8 1/32

CNMG120404FF CNMG120408FF

CNMG431FF CNMG432FF

12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

v v

CNMG-FN D

L10

Rε

ISO catalog number CNMG090304FN CNMG090308FN

ANSI catalog number CNMG321FN CNMG322FN

mm in mm in mm in 9,53 3/8 9,67 .381 0,4 1/64 9,53 3/8 9,67 .381 0,8 1/32

CNMG120402FN CNMG120404FN

CNMG4305FN CNMG431FN

12,70 1/2 12,90 .508 0,2 .008 12,70 1/2 12,90 .508 0,4 1/64

CNMG120408FN CNMG120412FN

CNMG432FN CNMG433FN

CNMG120416FN

CNMG434FN

B42

v v v v

v v v

12,70 1/2 12,90 .508 0,8 1/32 12,70 1/2 12,90 .508 1,2 3/64

v v v

12,70 1/2 12,90 .508 1,6 1/16

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number CNMG120404FP CNMG120408FP

ANSI catalog number CNMG431FP CNMG432FP

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

CNMG120412FP

CNMG433FP

12,70 1/2 12,90 .508 1,2 3/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CNMG-FP

v v

CNMG-FW D

L10

Rε

ISO catalog number CNMG120404FW CNMG120408FW

ANSI catalog number CNMG431FW CNMG432FW

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

v v

CNMG120412FW

CNMG433FW

12,70 1/2 12,90 .508 1,2 3/64

v v

CNMG-MBB D ISO catalog number CNMG120404MBB CNMG120408MBB

ANSI catalog number CNMG431MBB CNMG432MBB

Rε

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

C2–C70

www.kennametal.com

L10

C72–C118

C119–C129

v v

C130–C161

B10–B23

B24–B31

B32–B37

B43

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CNMG-MN

ISO catalog number CNMG090304MN CNMG090308MN

ANSI catalog number CNMG321MN CNMG322MN

mm in mm in mm in 9,53 3/8 9,67 .381 0,4 1/64 9,53 3/8 9,67 .381 0,8 1/32

CNMG090312MN CNMG120404MN

CNMG323MN CNMG431MN

9,53 3/8 9,67 .381 1,2 3/64 12,70 1/2 12,90 .508 0,4 1/64

CNMG120408MN CNMG120412MN

CNMG432MN CNMG433MN

12,70 1/2 12,90 .508 0,8 1/32 12,70 1/2 12,90 .508 1,2 3/64

CNMG120416MN CNMG160608MN

CNMG434MN CNMG542MN

12,70 1/2 12,90 .508 1,6 1/16 15,88 5/8 16,12 .635 0,8 1/32

v v

CNMG160612MN CNMG160616MN

CNMG543MN CNMG544MN

15,88 5/8 16,12 .635 1,2 3/64 15,88 5/8 16,12 .635 1,6 1/16

v v v v

CNMG190608MN CNMG190612MN

CNMG642MN CNMG643MN

19,05 3/4 19,34 .762 0,8 1/32 19,05 3/4 19,34 .762 1,2 3/64

v v v

CNMG190616MN

CNMG644MN

19,05 3/4 19,34 .762 1,6 1/16

v v v

v v v v v v v v v v v v v v v v v v v v v

v v v

v v

v v v v

CNMG-MP D

L10

Rε

ISO catalog number CNMG090308MP CNMG120404MP

ANSI catalog number CNMG322MP CNMG431MP

mm in mm in mm in 9,53 3/8 9,67 .381 0,8 1/32 12,70 1/2 12,90 .508 0,4 1/64

CNMG120408MP CNMG120412MP

CNMG432MP CNMG433MP

12,70 1/2 12,90 .508 0,8 1/32 12,70 1/2 12,90 .508 1,2 3/64

CNMG120416MP CNMG160608MP

CNMG434MP CNMG542MP

CNMG160612MP CNMG160616MP

v v

v v v

v v

v v v

v v

v v v

v v

12,70 1/2 12,90 .508 1,6 1/16 15,88 5/8 16,12 .635 0,8 1/32

v v

v v v

v v

CNMG543MP CNMG544MP

15,88 5/8 16,12 .635 1,2 3/64 15,88 5/8 16,12 .635 1,6 1/16

v v v

v v

CNMG190608MP CNMG190612MP

CNMG642MP CNMG643MP

19,05 3/4 19,34 .762 0,8 1/32 19,05 3/4 19,34 .762 1,2 3/64

v v

v v v

v v

CNMG190616MP

CNMG644MP

19,05 3/4 19,34 .762 1,6 1/16

v v

B44

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number CNMG120401MS CNMG120402MS

ANSI catalog number CNMG430MS CNMG4305MS

mm in mm in mm in 12,70 1/2 12,90 .508 0,1 .004 12,70 1/2 12,90 .508 0,2 .008

CNMG120404MS CNMG120408MS

CNMG431MS CNMG432MS

CNMG120412MS CNMG120416MS

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CNMG-MS

v v

12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

v v

CNMG433MS CNMG434MS

12,70 1/2 12,90 .508 1,2 3/64 12,70 1/2 12,90 .508 1,6 1/16

v v

CNMG160608MS CNMG160612MS

CNMG542MS CNMG543MS

15,88 5/8 16,12 .635 0,8 1/32 15,88 5/8 16,12 .635 1,2 3/64

v v

CNMG190608MS CNMG190612MS

CNMG642MS CNMG643MS

19,05 3/4 19,34 .762 0,8 1/32 19,05 3/4 19,34 .762 1,2 3/64

v v

CNMG190616MS

CNMG644MS

19,05 3/4 19,34 .762 1,6 1/16

v v

CNMG-MW D ISO catalog number CNMG120408MW CNMG120412MW

ANSI catalog number CNMG432MW CNMG433MW

L10

Rε

mm in mm in mm in 12,70 1/2 12,90 .508 0,8 1/32 12,70 1/2 12,90 .508 1,2 3/64

v v v v v v

CNMG-P D

L10

Rε

ISO catalog number CNMG120404P CNMG120408P

ANSI catalog number CNMG431P CNMG432P

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

CNMG120412P CNMG120416P

CNMG433P CNMG434P

12,70 1/2 12,90 .508 1,2 3/64 12,70 1/2 12,90 .508 1,6 1/16

CNMG190612P

CNMG643P

19,05 3/4 19,34 .762 1,2 3/64

C2–C70

www.kennametal.com

C72–C118

C119–C129

v v

v v v v

C130–C161

B10–B23

B24–B31

B32–B37

B45

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number CNMG120408RBB

ANSI catalog number CNMG432RBB

L10

Rε

mm in mm in mm in 12,70 1/2 12,90 .508 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CNMG-RBB

CNMG-RM D

L10

Rε

ISO catalog number CNMG190612RM CNMG190616RM

ANSI catalog number CNMG643RM CNMG644RM

mm in mm in mm in 19,05 3/4 19,34 .762 1,2 3/64 19,05 3/4 19,34 .762 1,6 1/16

v v v

CNMG250924RM

CNMG866RM

25,40 1 25,79 1.015 2,4 3/32

v v v

CNMG-RN D

L10

Rε

ISO catalog number CNMG120408RN CNMG120412RN

ANSI catalog number CNMG432RN CNMG433RN

mm in mm in mm in 12,70 1/2 12,90 .508 0,8 1/32 12,70 1/2 12,90 .508 1,2 3/64

CNMG120416RN CNMG160608RN

CNMG434RN CNMG542RN

12,70 1/2 12,90 .508 1,6 1/16 15,88 5/8 16,12 .635 0,8 1/32

v v v v v

CNMG160612RN CNMG160616RN

CNMG543RN CNMG544RN

15,88 5/8 16,12 .635 1,2 3/64 15,88 5/8 16,12 .635 1,6 1/16

v v v v v v

CNMG190608RN CNMG190612RN

CNMG642RN CNMG643RN

19,05 3/4 19,34 .762 0,8 1/32 19,05 3/4 19,34 .762 1,2 3/64

v v

CNMG190616RN CNMG190624RN

CNMG644RN CNMG646RN

19,05 3/4 19,34 .762 1,6 1/16 19,05 3/4 19,34 .762 2,4 3/32

v v v v

v v v v v v v v v v

v v v

v v v v

v v v

CNMG-RP D

L10

Rε

ISO catalog number CNMG120404RP CNMG120408RP

ANSI catalog number CNMG431RP CNMG432RP

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

CNMG120412RP CNMG120416RP

CNMG433RP CNMG434RP

12,70 1/2 12,90 .508 1,2 3/64 12,70 1/2 12,90 .508 1,6 1/16

CNMG160608RP CNMG160612RP

CNMG542RP CNMG543RP

15,88 5/8 16,12 .635 0,8 1/32 15,88 5/8 16,12 .635 1,2 3/64

v v

v v v v v v v v v v

v v v v v v

CNMG160616RP CNMG190612RP

CNMG544RP CNMG643RP

15,88 5/8 16,12 .635 1,6 1/16 19,05 3/4 19,34 .762 1,2 3/64

v v v

v v

v v v v v v v v v v

v v v v v v

CNMG190616RP

CNMG644RP

19,05 3/4 19,34 .762 1,6 1/16

v v v v

B46

v v

v v v

v v v v

v v v v v v v v v v v

v v v v v v

v v v v v v v v v v v

v v v v v v

v v

v v v v v v v

v v v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CNMG-UN ISO catalog number CNMG120404UN CNMG120408UN

ANSI catalog number CNMG431UN CNMG432UN

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

CNMG120412UN CNMG120416UN

CNMG433UN CNMG434UN

12,70 1/2 12,90 .508 1,2 3/64 12,70 1/2 12,90 .508 1,6 1/16

v v v

CNMG160608UN CNMG160612UN

CNMG542UN CNMG543UN

15,88 5/8 16,12 .635 0,8 1/32 15,88 5/8 16,12 .635 1,2 3/64

v v v

CNMG160616UN CNMG190608UN

CNMG544UN CNMG642UN

15,88 5/8 16,12 .635 1,6 1/16 19,05 3/4 19,34 .762 0,8 1/32

v v v

CNMG190612UN CNMG190616UN

CNMG643UN CNMG644UN

19,05 3/4 19,34 .762 1,2 3/64 19,05 3/4 19,34 .762 1,6 1/16

v v v

v v v v v v

v v v

CNMG-UP D

L10

Rε

ISO catalog number CNMG120404UP CNMG120408UP

ANSI catalog number CNMG431UP CNMG432UP

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

CNMG120412UP CNMG160608UP

CNMG433UP CNMG542UP

CNMG160612UP CNMG190608UP CNMG190612UP CNMG190616UP

v v

v v v

v v

12,70 1/2 12,90 .508 1,2 3/64 15,88 5/8 16,12 .635 0,8 1/32

v v v

v v

v v v

CNMG543UP CNMG642UP

15,88 5/8 16,12 .635 1,2 3/64 19,05 3/4 19,34 .762 0,8 1/32

v v v

v v

CNMG643UP CNMG644UP

19,05 3/4 19,34 .762 1,2 3/64 19,05 3/4 19,34 .762 1,6 1/16

v v v

v v

v v v

CNMM-RH D

L10

Rε

ISO catalog number CNMM190612RH CNMM190616RH

ANSI catalog number CNMM643RH CNMM644RH

mm in mm in mm in 19,05 3/4 19,34 .762 1,2 3/64 19,05 3/4 19,34 .762 1,6 1/16

CNMM190624RH CNMM250924RH

CNMM646RH CNMM866RH

19,05 3/4 19,34 .762 2,4 3/32 25,40 1 25,79 1.015 2,4 3/32

C2–C70

www.kennametal.com

C72–C118

v v v v v v v v v v v v v v v

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B47

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CNMM-RM

ISO catalog number CNMM120408RM CNMM120412RM

ANSI catalog number CNMM432RM CNMM433RM

mm in mm in mm in 12,70 1/2 12,90 .508 0,8 1/32 12,70 1/2 12,90 .508 1,2 3/64

CNMM120416RM CNMM160612RM

CNMM434RM CNMM543RM

12,70 1/2 12,90 .508 1,6 1/16 15,88 5/8 16,12 .635 1,2 3/64

CNMM160616RM CNMM160624RM

CNMM544RM CNMM546RM

15,88 5/8 16,12 .635 1,6 1/16 15,88 5/8 16,12 .635 2,4 3/32

v v v

CNMM190612RM CNMM190616RM

CNMM643RM CNMM644RM

19,05 3/4 19,34 .762 1,2 3/64 19,05 3/4 19,34 .762 1,6 1/16

v v v v

CNMM190624RM CNMM250924RM

CNMM646RM CNMM866RM

19,05 3/4 19,34 .762 2,4 3/32 25,40 1 25,79 1.015 2,4 3/32

v v v v v v v v

v v v

v v

v v v v v v v v v v

CNMM-RP D

L10

Rε

ISO catalog number CNMM120408RP CNMM120412RP

ANSI catalog number CNMM432RP CNMM433RP

mm in mm in mm in 12,70 1/2 12,90 .508 0,8 1/32 12,70 1/2 12,90 .508 1,2 3/64

CNMM120416RP CNMM160608RP

CNMM434RP CNMM542RP

12,70 1/2 12,90 .508 1,6 1/16 15,88 5/8 16,12 .635 0,8 1/32

v v v v

CNMM160612RP CNMM160616RP

CNMM543RP CNMM544RP

15,88 5/8 16,12 .635 1,2 3/64 15,88 5/8 16,12 .635 1,6 1/16

v v v v v

v v v

v v v v v

v v

CNMM190612RP CNMM190616RP

CNMM643RP CNMM644RP

19,05 3/4 19,34 .762 1,2 3/64 19,05 3/4 19,34 .762 1,6 1/16

v v v v

v v

v v v v

v v v

CNMM190624RP CNMM250924RP

CNMM646RP CNMM866RP

19,05 3/4 19,34 .762 2,4 3/32 25,40 1 25,79 1.015 2,4 3/32

v v

v v v v v

v v

v v v v v

v v v

CNMP D

L10

Rε

ISO catalog number CNMP120404 CNMP120408

ANSI catalog number CNMP431 CNMP432

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

CNMP120412 CNMP160608

CNMP433 CNMP542

12,70 1/2 12,90 .508 1,2 3/64 15,88 5/8 16,12 .635 0,8 1/32

CNMP160612 CNMP190608

CNMP543 CNMP642

15,88 5/8 16,12 .635 1,2 3/64 19,05 3/4 19,34 .762 0,8 1/32

CNMP190612

CNMP643

19,05 3/4 19,34 .762 1,2 3/64

v v

B48

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number CNMP120404K CNMP120408K

ANSI catalog number CNMP431K CNMP432K

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

CNMP120412K

CNMP433K

12,70 1/2 12,90 .508 1,2 3/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CNMP-K

v v v v

CNMS D

L10

Rε

ISO catalog number CNMS120408 CNMS160608

ANSI catalog number CNMS432 CNMS542

mm in mm in mm in 12,70 1/2 12,90 .508 0,8 1/32 15,88 5/8 16,12 .635 0,8 1/32

CNMS190608 CNMS190612

CNMS642 CNMS643

19,05 3/4 19,34 .762 0,8 1/32 19,05 3/4 19,34 .762 1,2 3/64

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B49

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number DNGG110402FS DNGG110404FS

ANSI catalog number DNGG3305FS DNGG331FS

mm in mm in mm in 9,52 3/8 11,63 .458 0,2 .008 9,52 3/8 11,63 .458 0,4 1/64

DNGG110408FS DNGG150401FS

DNGG332FS DNGG430FS

DNGG150402FS DNGG150604FS

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DNGG-FS

v v

9,52 3/8 11,63 .458 0,8 1/32 12,70 1/2 15,50 .610 0,1 .004

DNGG4305FS DNGG441FS

12,70 1/2 15,50 .610 0,2 .008 12,70 1/2 15,50 .610 0,4 1/64

v v

DNGG150404FS DNGG150608FS

DNGG431FS DNGG442FS

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

v v

DNGG150408FS DNGG150412FS

DNGG432FS DNGG433FS

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

v v

DNGG150416FS

DNGG434FS

12,70 1/2 15,50 .610 1,6 1/16

DNGG-LF D

L10

Rε

ISO catalog number DNGG150402LF DNGG150404LF

ANSI catalog number DNGG4305LF DNGG431LF

mm in mm in mm in 12,70 1/2 15,50 .610 0,2 .008 12,70 1/2 15,50 .610 0,4 1/64

DNGG150408LF

DNGG432LF

12,70 1/2 15,50 .610 0,8 1/32

v v v

v v v v

DNGP D

L10

Rε

ISO catalog number DNGP150401 DNGP150402

ANSI catalog number DNGP430 DNGP4305

mm in mm in mm in 12,70 1/2 15,50 .610 0,1 .004 12,70 1/2 15,50 .610 0,2 .008

DNGP150404 DNGP150408

DNGP431 DNGP432

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

DNGP150604 DNGP150608

DNGP441 DNGP442

DNGP150612

DNGP443

B50

v v

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

v v

12,70 1/2 15,50 .610 1,2 3/64

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number DNMA110408 DNMA110412

ANSI catalog number DNMA332 DNMA333

mm in mm in mm in 9,53 3/8 11,63 .458 0,8 1/32 9,53 3/8 11,63 .458 1,2 3/64

DNMA150408 DNMA150412

DNMA432 DNMA433

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

DNMA150416 DNMA150608

DNMA434 DNMA442

12,70 1/2 15,50 .610 1,6 1/16 12,70 1/2 15,50 .610 0,8 1/32

DNMA150612 DNMA150616

DNMA443 DNMA444

12,70 1/2 15,50 .610 1,2 3/64 12,70 1/2 15,50 .610 1,6 1/16

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DNMA

v v

v v v v v v v v v v v v v v

DNMG D

L10

Rε

ISO catalog number DNMG150404B DNMG150408B

ANSI catalog number DNMG431 DNMG432

mm in mm in mm in 12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

v v

DNMG150412B DNMG150608B

DNMG433 DNMG442

12,70 1/2 15,50 .610 1,2 3/64 12,70 1/2 15,50 .610 0,8 1/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B51

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DNMG-CT

ISO catalog number DNMG110404CT DNMG110408CT

ANSI catalog number DNMG331CT DNMG332CT

mm in mm in mm in 9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

DNMG150404CT DNMG150408CT

DNMG431CT DNMG432CT

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

v v v v v v

v v

DNMG150412CT DNMG150604CT

DNMG433CT DNMG441CT

12,70 1/2 15,50 .610 1,2 3/64 12,70 1/2 15,50 .610 0,3 .013

v v

DNMG150608CT DNMG150612CT

DNMG442CT DNMG443CT

12,70 1/2 15,50 .610 0,7 .029 12,70 1/2 15,50 .610 1,1 .045

v v v

v v

v v v

v v

v v v

DNMG-FF D

L10

Rε

ISO catalog number DNMG110404FF DNMG110408FF

ANSI catalog number DNMG331FF DNMG332FF

mm in mm in mm in 9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

DNMG150404FF DNMG150408FF

DNMG431FF DNMG432FF

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

v v

DNMG150604FF DNMG150608FF

DNMG441FF DNMG442FF

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

v v

DNMG-FN D

L10

Rε

ISO catalog number DNMG110404FN DNMG110408FN

ANSI catalog number DNMG331FN DNMG332FN

mm in mm in mm in 9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

DNMG110412FN DNMG150404FN

DNMG333FN DNMG431FN

9,53 3/8 11,63 .458 1,2 3/64 12,70 1/2 15,50 .610 0,4 1/64

v v v v v

DNMG150408FN DNMG150412FN

DNMG432FN DNMG433FN

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

v v v

v v

DNMG150604FN DNMG150608FN

DNMG441FN DNMG442FN

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

v v v

DNMG150612FN

DNMG443FN

12,70 1/2 15,50 .610 1,2 3/64

v v v

B52

v v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number DNMG110404FP DNMG110408FP

ANSI catalog number DNMG331FP DNMG332FP

mm in mm in mm in 9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

DNMG150404FP DNMG150408FP

DNMG431FP DNMG432FP

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

DNMG150412FP DNMG150604FP

DNMG433FP DNMG441FP

12,70 1/2 15,50 .610 1,2 3/64 12,70 1/2 15,50 .610 0,4 1/64

DNMG150608FP DNMG150612FP

DNMG442FP DNMG443FP

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DNMG-FP

v v

DNMG-FW D

L10

Rε

ISO catalog number DNMG110404FW DNMG110408FW

ANSI catalog number DNMG331FW DNMG332FW

mm in mm in mm in 9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

DNMG150404FW DNMG150408FW

DNMG431FW DNMG432FW

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,4 .016

DNMG150604FW DNMG150608FW

DNMG441FW DNMG442FW

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,4 .016

DNMG-MN D

L10

Rε

ISO catalog number DNMG110404MN DNMG110408MN

ANSI catalog number DNMG331MN DNMG332MN

mm in mm in mm in 9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

DNMG110412MN DNMG150404MN

DNMG333MN DNMG431MN

9,53 3/8 11,63 .458 1,2 3/64 12,70 1/2 15,50 .610 0,4 1/64

DNMG150408MN DNMG150412MN

DNMG432MN DNMG433MN

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

DNMG150416MN DNMG150604MN

DNMG434MN DNMG441MN

12,70 1/2 15,50 .610 1,6 1/16 12,70 1/2 15,50 .610 0,4 1/64

DNMG150608MN DNMG150612MN

DNMG442MN DNMG443MN

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

DNMG150616MN DNMG190612MN

DNMG444MN DNMG543MN

12,70 1/2 15,50 .610 1,6 1/16 15,88 5/8 19,38 .763 1,2 3/64

C2–C70

www.kennametal.com

C72–C118

v v v v v v v v v v v v v v v v v v v v v v

v v v v v v v v v v v v v v

v v

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B53

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number DNMG110408MP DNMG110412MP

ANSI catalog number DNMG332MP DNMG333MP

mm in mm in mm in 9,53 3/8 11,63 .458 0,8 1/32 9,53 3/8 11,63 .458 1,2 3/64

DNMG150404MP DNMG150408MP

DNMG431MP DNMG432MP

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

DNMG150412MP DNMG150604MP

DNMG433MP DNMG441MP

12,70 1/2 15,50 .610 1,2 3/64 12,70 1/2 15,50 .610 0,4 1/64

DNMG150608MP DNMG150612MP

DNMG442MP DNMG443MP

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DNMG-MP

v v

v v v v v

v v

v v v

v v

v v v

v v

v v v

v v

DNMG-MS D

L10

Rε

ISO catalog number DNMG110408MS DNMG150401MS

ANSI catalog number DNMG332MS DNMG430MS

mm in mm in mm in 9,53 3/8 11,63 .458 0,8 1/32 12,70 1/2 15,50 .610 0,1 .004

DNMG150402MS DNMG150404MS

DNMG4305MS DNMG431MS

12,70 1/2 15,50 .610 0,2 .008 12,70 1/2 15,50 .610 0,4 1/64

DNMG150604MS DNMG150608MS

DNMG441MS DNMG442MS

DNMG150408MS DNMG150412MS DNMG150612MS

v v

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

v v

DNMG432MS DNMG433MS

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

v v

DNMG443MS

12,70 1/2 15,50 .610 1,2 3/64

v v

DNMG-MW D

L10

Rε

ISO catalog number DNMG150408MW DNMG150412MW

ANSI catalog number DNMG432MW DNMG433MW

mm in mm in mm in 12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 1,2 3/64

DNMG150608MW DNMG150612MW

DNMG442MW DNMG443MW

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 1,2 3/64

B54

v v v v v v v v v v v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number DNMG150404P DNMG150408P

ANSI catalog number DNMG431P DNMG432P

mm in mm in mm in 12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

DNMG150604P DNMG150608P

DNMG441P DNMG442P

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DNMG-P

v v v

v v v v v

DNMG-RM D ISO catalog number DNMG190608RM DNMG190612RM

ANSI catalog number DNMG542RM DNMG543RM

L10

Rε

mm in mm in mm in 15,88 5/8 19,38 .763 0,8 1/32 15,88 5/8 19,38 .763 1,2 3/64

DNMG-RN D

L10

Rε

ISO catalog number DNMG150408RN DNMG150412RN

ANSI catalog number DNMG432RN DNMG433RN

mm in mm in mm in 12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

DNMG150416RN DNMG150608RN

DNMG434RN DNMG442RN

12,70 1/2 15,50 .610 1,6 1/16 12,70 1/2 15,50 .610 0,8 1/32

DNMG150612RN DNMG150616RN

DNMG443RN DNMG444RN

12,70 1/2 15,50 .610 1,2 3/64 12,70 1/2 15,50 .610 1,6 1/16

v v v v v

DNMG190608RN DNMG190612RN

DNMG542RN DNMG543RN

15,88 5/8 19,38 .763 0,8 1/32 15,88 5/8 19,38 .763 1,2 3/64

v v v

C2–C70

www.kennametal.com

C72–C118

v v v v v v v v v v v v v v

v v v v

v v v

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B55

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DNMG-RP

ISO catalog number DNMG110408RP DNMG110412RP

ANSI catalog number DNMG332RP DNMG333RP

mm in mm in mm in 9,53 3/8 11,63 .458 0,8 1/32 9,53 3/8 11,63 .458 1,2 3/64

DNMG150408RP DNMG150412RP

DNMG432RP DNMG433RP

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

v v v v v

DNMG150416RP DNMG150608RP

DNMG434RP DNMG442RP

12,70 1/2 15,50 .610 1,6 1/16 12,70 1/2 15,50 .610 0,8 1/32

v v v v v v v v v v v

v v v v v v

DNMG150612RP DNMG150616RP

DNMG443RP DNMG444RP

12,70 1/2 15,50 .610 1,2 3/64 12,70 1/2 15,50 .610 1,6 1/16

v v v v v v v v v v v

v v

v v v v

v v v v v v v v v v v v

v v

v v v

v v v v

v v v

DNMG-UN D

L10

Rε

ISO catalog number DNMG110408UN DNMG110412UN

ANSI catalog number DNMG332UN DNMG333UN

mm in mm in mm in 9,53 3/8 11,63 .458 0,8 1/32 9,53 3/8 11,63 .458 1,2 3/64

DNMG150408UN DNMG150412UN

DNMG432UN DNMG433UN

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

v v v

DNMG150416UN DNMG150608UN

DNMG434UN DNMG442UN

12,70 1/2 15,50 .610 1,6 1/16 12,70 1/2 15,50 .610 0,8 1/32

v v v

DNMG150612UN DNMG150616UN

DNMG443UN DNMG444UN

12,70 1/2 15,50 .610 1,2 3/64 12,70 1/2 15,50 .610 1,6 1/16

v v v v v v v v

v v

v v v v v

DNMG-UP D

L10

Rε

ISO catalog number DNMG110408UP DNMG110412UP

ANSI catalog number DNMG332UP DNMG333UP

mm in mm in mm in 9,53 3/8 11,63 .458 0,8 1/32 9,53 3/8 11,63 .458 1,2 3/64

DNMG150404UP DNMG150408UP

DNMG431UP DNMG432UP

DNMG150412UP DNMG150604UP DNMG150608UP DNMG150612UP

B56

v v

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

v v

v v v

v v

DNMG433UP DNMG441UP

12,70 1/2 15,50 .610 1,2 3/64 12,70 1/2 15,50 .610 0,4 1/64

v v v

v v

DNMG442UP DNMG443UP

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

v v v

v v

v v v

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DNMM-RM

ISO catalog number DNMM150408RM DNMM150412RM

ANSI catalog number DNMM432RM DNMM433RM

mm in mm in mm in 12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

DNMM150608RM DNMM150612RM

DNMM442RM DNMM443RM

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

v v v

DNMM150616RM

DNMM444RM

12,70 1/2 15,50 .610 1,6 1/16

v v

v v v v

DNMM-RP D

L10

Rε

ISO catalog number DNMM150608RP DNMM150612RP

ANSI catalog number DNMM442RP DNMM443RP

mm in mm in mm in 12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

v v

DNMM150616RP

DNMM444RP

12,70 1/2 15,50 .610 1,6 1/16

v v

DNMP D

L10

Rε

ISO catalog number DNMP150404 DNMP150408

ANSI catalog number DNMP431 DNMP432

mm in mm in mm in 12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

v v

DNMP150412

DNMP433

12,70 1/2 15,50 .610 1,2 3/64

v v

DNMP-K D

L10

Rε

ISO catalog number DNMP110408K DNMP150404K

ANSI catalog number DNMP332K DNMP431K

mm in mm in mm in 9,53 3/8 11,63 .458 0,8 1/32 12,70 1/2 15,50 .610 0,4 1/64

DNMP150408K DNMP150412K

DNMP432K DNMP433K

12,70 1/2 15,50 .610 0,8 1/32 12,70 1/2 15,50 .610 1,2 3/64

DNMP190608K

DNMP542K

15,88 5/8 19,38 .763 0,8 1/32

C2–C70

www.kennametal.com

C72–C118

v v

C119–C129

v v

C130–C161

B10–B23

B24–B31

B32–B37

B57

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number DNMS150408

ANSI catalog number DNMS432

Rε

L10

mm in mm in mm in 12,70 1/2 15,50 .610 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DNMS

RCGX-LF D ISO catalog number RCGX190600ELF

ANSI catalog number RCGX64ELF

Rε

L10

mm in mm 19,05 3/4 —

in mm — —

in —

RNMA D ISO catalog number RNMA090300 RNMA120400

ANSI catalog number RNMA32 RNMA43

RNMA150600 RNMA190600 RNMA250900

Rε

L10

mm in mm 9,53 3/8 — 12,70 1/2 —

in mm — — — —

in — —

RNMA54 RNMA64

15,88 5/8 19,05 3/4

— —

RNMA86

25,40

—

v v v v

RNMG D ISO catalog number RNMG190600 RNMG250900

ANSI catalog number RNMG64 RNMG86

Rε

L10

mm in mm 19,05 3/4 — 25,40 1 —

in mm — — — —

in — —

v v

RNMG-RN D ISO catalog number RNMG090300RN RNMG120400RN

ANSI catalog number RNMG32RN RNMG43RN

RNMG150600RN RNMG190600RN RNMG250900RN

B58

Rε

L10

mm in mm 9,53 3/8 — 12,70 1/2 —

in mm — — — —

in — —

RNMG54RN RNMG64RN

15,88 5/8 19,05 3/4

— —

v v v

RNMG86RN

25,40

—

v v v

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number RNMG120400UN

ANSI catalog number RNMG43UN

Rε

L10

mm in mm 12,70 1/2 —

in mm — —

in —

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

RNMG-UN

v v v

SNGG-FS D ISO catalog number SNGG090308FS SNGG120408FS

ANSI catalog number SNGG322FS SNGG432FS

L10

Rε

mm in mm in mm in 9,53 3/8 9,53 .375 0,8 1/32 12,70 1/2 12,70 .500 0,8 1/32

SNGG-LF D

L10

Rε

ISO catalog number SNGG090308LF SNGG120408LF

ANSI catalog number SNGG322LF SNGG432LF

mm in mm in mm in 9,53 3/8 9,53 .375 0,8 1/32 12,70 1/2 12,70 .500 0,8 1/32

SNGG150612LF

SNGG543LF

15,88 5/8 15,88 .625 1,2 3/64

v v

SNGP D ISO catalog number SNGP120404 SNGP120408

ANSI catalog number SNGP431 SNGP432

Rε

mm in mm in mm in 12,70 1/2 12,70 .500 0,4 1/64 12,70 1/2 12,70 .500 0,8 1/32

C2–C70

www.kennametal.com

L10

C72–C118

C119–C129

C130–C161

B10–B23

v v

B24–B31

B32–B37

B59

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SNMA ISO catalog number SNMA120408 SNMA120412

ANSI catalog number SNMA432 SNMA433

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

SNMA120416 SNMA150612

SNMA434 SNMA543

12,70 1/2 12,70 .500 1,6 1/16 15,88 5/8 15,88 .625 1,2 3/64

v v v

SNMA150616 SNMA190612

SNMA544 SNMA643

15,88 5/8 15,88 .625 1,6 1/16 19,05 3/4 19,05 .750 1,2 3/64

v v v

SNMA190616

SNMA644

19,05 3/4 19,05 .750 1,6 1/16

v v v

v v v v

SNMG D

L10

Rε

ISO catalog number SNMG120408 SNMG120412

ANSI catalog number SNMG432 SNMG433

mm in mm 12,70 1/2 12,70 12,70 1/2 12,70

in mm in .500 0,8 1/32 .500 1,2 3/64

SNMG120416B SNMG190612

SNMG434 SNMG643

12,70 1/2 12,70 19,05 3/4 19,05

.500 1,6 1/16 .750 1,2 3/64

SNMG190616B SNMG250924

SNMG644 SNMG866

19,05 3/4 19,05 .750 1,6 1/16 25,40 1 25,40 1.000 2,4 3/32

v v v v v

v v

SNMG-FF D

L10

Rε

ISO catalog number SNMG090304FF SNMG090308FF

ANSI catalog number SNMG321FF SNMG322FF

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

SNMG120404FF SNMG120408FF

SNMG431FF SNMG432FF

12,70 1/2 12,70 .500 0,4 1/64 12,70 1/2 12,70 .500 0,8 1/32

v v

SNMG-FN D

L10

Rε

ISO catalog number SNMG090304FN SNMG090308FN

ANSI catalog number SNMG321FN SNMG322FN

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

SNMG120404FN SNMG120408FN

SNMG431FN SNMG432FN

12,70 1/2 12,70 .500 0,4 1/64 12,70 1/2 12,70 .500 0,8 1/32

SNMG120412FN SNMG120416FN

SNMG433FN SNMG434FN

12,70 1/2 12,70 .500 1,2 3/64 12,70 1/2 12,70 .500 1,6 1/16

B60

v v

v v v

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number SNMG120404FP SNMG120408FP

ANSI catalog number SNMG431FP SNMG432FP

mm in mm in mm in 12,70 1/2 12,70 .500 0,4 1/64 12,70 1/2 12,70 .500 0,8 1/32

SNMG120412FP

SNMG433FP

12,70 1/2 12,70 .500 1,2 3/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SNMG-FP

v v

SNMG-FW D ISO catalog number SNMG120408FW SNMG120412FW

ANSI catalog number SNMG432FW SNMG433FW

L10

Rε

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

v v

SNMG-MN D

L10

Rε

ISO catalog number SNMG090304MN SNMG090308MN

ANSI catalog number SNMG321MN SNMG322MN

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

SNMG090312MN SNMG120404MN

SNMG323MN SNMG431MN

9,53 3/8 9,53 .375 1,2 3/64 12,70 1/2 12,70 .500 0,4 1/64

v v

SNMG120408MN SNMG120412MN

SNMG432MN SNMG433MN

12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

v v v v

SNMG120416MN SNMG150612MN

SNMG434MN SNMG543MN

12,70 1/2 12,70 .500 1,6 1/16 15,88 5/8 15,88 .625 1,2 3/64

v v

SNMG150616MN SNMG190612MN

SNMG544MN SNMG643MN

15,88 5/8 15,88 .625 1,6 1/16 19,05 3/4 19,05 .750 1,2 3/64

v v v

SNMG190616MN

SNMG644MN

19,05 3/4 19,05 .750 1,6 1/16

C2–C70

www.kennametal.com

C72–C118

v v v v

v v v

v v v v

v v

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B61

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SNMG-MP

ISO catalog number SNMG120408MP SNMG120412MP

ANSI catalog number SNMG432MP SNMG433MP

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

SNMG120416MP SNMG150608MP

SNMG434MP SNMG542MP

12,70 1/2 12,70 .500 1,6 1/16 15,88 5/8 15,88 .625 0,8 1/32

SNMG150612MP SNMG150616MP

SNMG543MP SNMG544MP

15,88 5/8 15,88 .625 1,2 3/64 15,88 5/8 15,88 .625 1,6 1/16

v v

SNMG190612MP SNMG190616MP

SNMG643MP SNMG644MP

19,05 3/4 19,05 .750 1,2 3/64 19,05 3/4 19,05 .750 1,6 1/16

v v v

v v

v v v

v v

v v v

v v

SNMG-MS D

L10

Rε

ISO catalog number SNMG120408MS SNMG120412MS

ANSI catalog number SNMG432MS SNMG433MS

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

SNMG150608MS SNMG150612MS

SNMG542MS SNMG543MS

15,88 5/8 15,88 .625 0,8 1/32 15,88 5/8 15,88 .625 1,2 3/64

SNMG190612MS

SNMG643MS

19,05 3/4 19,05 .750 1,2 3/64

v v

SNMG-MW D ISO catalog number SNMG120408MW SNMG120412MW

ANSI catalog number SNMG432MW SNMG433MW

L10

Rε

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

v v v v

SNMG-P D ISO catalog number SNMG120408P SNMG120412P

B62

ANSI catalog number SNMG432P SNMG433P

L10

Rε

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

v v v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number SNMG190612RM SNMG190616RM

ANSI catalog number SNMG643RM SNMG644RM

SNMG250924RM

SNMG866RM

L10

Rε

mm in mm in mm in 19,05 3/4 19,05 .750 1,2 3/64 19,05 3/4 19,05 .750 1,6 1/16 25,40

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SNMG-RM

25,40 1.000 2,4 3/32

v v v

SNMG-RN D

L10

Rε

ISO catalog number SNMG090412RN SNMG120408RN

ANSI catalog number SNMG333RN SNMG432RN

mm in mm in mm in 9,53 3/8 9,53 .375 1,2 3/64 12,70 1/2 12,70 .500 0,8 1/32

SNMG120412RN SNMG120416RN

SNMG433RN SNMG434RN

12,70 1/2 12,70 .500 1,2 3/64 12,70 1/2 12,70 .500 1,6 1/16

v v v v

SNMG150608RN SNMG150612RN

SNMG542RN SNMG543RN

15,88 5/8 15,88 .625 0,8 1/32 15,88 5/8 15,88 .625 1,2 3/64

v v

SNMG150616RN SNMG190608RN

SNMG544RN SNMG642RN

15,88 5/8 15,88 .625 1,6 1/16 19,05 3/4 19,05 .750 0,8 1/32

v v v v

SNMG190612RN SNMG190616RN

SNMG643RN SNMG644RN

19,05 3/4 19,05 .750 1,2 3/64 19,05 3/4 19,05 .750 1,6 1/16

v v v v

SNMG190624RN SNMG250924RN

SNMG646RN SNMG866RN

19,05 3/4 19,05 .750 2,4 3/32 25,40 1 25,40 1.000 2,4 3/32

v v

v v v v v

v v v v

v v

v v v v

SNMG-RP D

L10

Rε

ISO catalog number SNMG120408RP SNMG120412RP

ANSI catalog number SNMG432RP SNMG433RP

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

SNMG120416RP SNMG150612RP

SNMG434RP SNMG543RP

12,70 1/2 12,70 .500 1,6 1/16 15,88 5/8 15,88 .625 1,2 3/64

SNMG150616RP SNMG190612RP

SNMG544RP SNMG643RP

15,88 5/8 15,88 .625 1,6 1/16 19,05 3/4 19,05 .750 1,2 3/64

v v v v v v v

v v v v

v v v v v v

SNMG190616RP

SNMG644RP

19,05 3/4 19,05 .750 1,6 1/16

v v

v v v v

C2–C70

www.kennametal.com

C72–C118

v v v v v v v v v v v

v v v v

v v v v v v v v v v v

v v v v v v

v v v v

C119–C129

v v v v

v v

v v v

C130–C161

v v

B10–B23

B24–B31

v v

B32–B37

B63

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SNMG-UN ISO catalog number SNMG120408UN SNMG120412UN

ANSI catalog number SNMG432UN SNMG433UN

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

SNMG120416UN SNMG150612UN

SNMG434UN SNMG543UN

12,70 1/2 12,70 .500 1,6 1/16 15,88 5/8 15,88 .625 1,2 3/64

v v v

SNMG150616UN SNMG190612UN

SNMG544UN SNMG643UN

15,88 5/8 15,88 .625 1,6 1/16 19,05 3/4 19,05 .750 1,2 3/64

v v v

SNMG190616UN

SNMG644UN

19,05 3/4 19,05 .750 1,6 1/16

v v v

v v v v v v

v v v

SNMG-UP D

L10

Rε

ISO catalog number SNMG120408UP SNMG120412UP

ANSI catalog number SNMG432UP SNMG433UP

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

SNMG120416UP SNMG150612UP

SNMG434UP SNMG543UP

12,70 1/2 12,70 .500 1,6 1/16 15,88 5/8 15,88 .625 1,2 3/64

v v v

SNMG190612UP

SNMG643UP

19,05 3/4 19,05 .750 1,2 3/64

v v v

v v

SNMM-RH D

L10

Rε

ISO catalog number SNMM190612RH SNMM190616RH

ANSI catalog number SNMM643RH SNMM644RH

mm in mm in mm in 19,05 3/4 19,05 .750 1,2 3/64 19,05 3/4 19,05 .750 1,6 1/16

SNMM190624RH SNMM250724RH

SNMM646RH SNMM856RH

19,05 3/4 19,05 .750 2,4 3/32 25,40 1 25,40 1.000 2,4 3/32

SNMM250732RH SNMM250924RH

SNMM858RH SNMM866RH

25,40 25,40

B64

1 1

25,40 1.000 3,2 1/8 25,40 1.000 2,4 3/32

v v v v v v v v v v v v v v v v v v v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SNMM-RM ISO catalog number SNMM120408RM SNMM120412RM

ANSI catalog number SNMM432RM SNMM433RM

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

SNMM120416RM SNMM150612RM

SNMM434RM SNMM543RM

12,70 1/2 12,70 .500 1,6 1/16 15,88 5/8 15,88 .625 1,2 3/64

SNMM150616RM SNMM190612RM

SNMM544RM SNMM643RM

15,88 5/8 15,88 .625 1,6 1/16 19,05 3/4 19,05 .750 1,2 3/64

v v v

SNMM190616RM SNMM190624RM

SNMM644RM SNMM646RM

19,05 3/4 19,05 .750 1,6 1/16 19,05 3/4 19,05 .750 2,4 3/32

v v v

SNMM250724RM SNMM250924RM

SNMM856RM SNMM866RM

25,40 25,40

v v v

1 1

25,40 1.000 2,4 3/32 25,40 1.000 2,4 3/32

v v v v v v v

v v v v

v v

v v v v

SNMM-RP D

L10

Rε

ISO catalog number SNMM120408RP SNMM120412RP

ANSI catalog number SNMM432RP SNMM433RP

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

SNMM150612RP SNMM150616RP

SNMM543RP SNMM544RP

15,88 5/8 15,88 .625 1,2 3/64 15,88 5/8 15,88 .625 1,6 1/16

SNMM190612RP SNMM190616RP

SNMM643RP SNMM644RP

19,05 3/4 19,05 .750 1,2 3/64 19,05 3/4 19,05 .750 1,6 1/16

SNMM190624RP SNMM250724RP

SNMM646RP SNMM856RP

19,05 3/4 19,05 .750 2,4 3/32 25,40 1 25,40 1.000 2,4 3/32

SNMM250924RP

SNMM866RP

25,40

v v v

v v

25,40 1.000 2,4 3/32

v v

SNMP D

L10

Rε

ISO catalog number SNMP120408 SNMP150612

ANSI catalog number SNMP432 SNMP543

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 15,88 5/8 15,88 .625 1,2 3/64

SNMP190612

SNMP643

19,05 3/4 19,05 .750 1,2 3/64

v v

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B65

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number SNMP120408K

ANSI catalog number SNMP432K

L10

Rε

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SNMP-K

v v

SNMS D

L10

Rε

ISO catalog number SNMS120408 SNMS120412

ANSI catalog number SNMS432 SNMS433

mm in mm in mm in 12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

SNMS190612

SNMS643

19,05 3/4 19,05 .750 1,2 3/64

TNGG-FS D

L10

Rε

ISO catalog number TNGG160402FS TNGG160404FS

ANSI catalog number TNGG3305FS TNGG331FS

mm in mm in mm in 9,53 3/8 16,50 .650 0,2 .008 9,53 3/8 16,50 .650 0,4 1/64

TNGG160408FS TNGG220408FS

TNGG332FS TNGG432FS

9,53 3/8 16,50 .650 0,8 1/32 12,70 1/2 22,00 .866 0,8 1/32

v v

TNGG-LF D

B66

L10

Rε

ISO catalog number TNGG160402LF TNGG160404LF

ANSI catalog number TNGG3305LF TNGG331LF

mm in mm in mm in 9,53 3/8 16,50 .650 0,2 .008 9,53 3/8 16,50 .650 0,4 1/64

v v

TNGG160408LF

TNGG332LF

9,53 3/8 16,50 .650 0,8 1/32

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number TNGP160402 TNGP160404

ANSI catalog number TNGP3305 TNGP331

mm in mm in mm in 9,53 3/8 16,50 .650 0,2 .008 9,53 3/8 16,50 .650 0,4 1/64

TNGP160408

TNGP332

9,53 3/8 16,50 .650 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TNGP

v v

TNMA D

L10

Rε

ISO catalog number TNMA160408 TNMA160412

ANSI catalog number TNMA332 TNMA333

mm in mm in mm in 9,53 3/8 16,50 .650 0,8 1/32 9,53 3/8 16,50 .650 1,2 3/64

TNMA160416 TNMA220408

TNMA334 TNMA432

9,53 3/8 16,50 .650 1,6 1/16 12,70 1/2 22,00 .866 0,8 1/32

TNMA220412 TNMA220416

TNMA433 TNMA434

TNMA270616

TNMA544

v v v

v v v v v v v v

12,70 1/2 22,00 .866 1,2 3/64 12,70 1/2 22,00 .866 1,6 1/16

v v v

15,88 5/8 27,50 1.083 1,6 1/16

v v

v v v

TNMG D

L10

Rε

ISO catalog number TNMG160408B TNMG160412

ANSI catalog number TNMG332 TNMG333

mm in mm in mm in 9,53 3/8 16,50 .650 0,8 1/32 9,53 3/8 16,50 .650 1,2 3/64

TNMG220408 TNMG220412

TNMG432 TNMG433

12,70 1/2 22,00 .866 0,8 1/32 12,70 1/2 22,00 .866 1,2 3/64

TNMG220416 TNMG330924

TNMG434 TNMG666

12,70 1/2 22,00 .866 1,6 1/16 19,05 3/4 33,00 1.299 2,4 3/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

v v v v v v

C130–C161

B10–B23

B24–B31

B32–B37

B67

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number TNMG220408CT TNMG220412CT

ANSI catalog number TNMG432CT TNMG433CT

L10

Rε

mm in mm in mm in 12,70 1/2 22,00 .866 0,8 1/32 12,70 1/2 22,00 .866 1,2 3/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TNMG-CT

v v

TNMG-FF D

L10

Rε

ISO catalog number TNMG110304FF TNMG110308FF

ANSI catalog number TNMG221FF TNMG222FF

mm in mm in mm in 6,35 1/4 11,00 .433 0,4 1/64 6,35 1/4 11,00 .433 0,8 1/32

TNMG160404FF TNMG160408FF

TNMG331FF TNMG332FF

9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

v v v v v

v v

TNMG-FN D

L10

Rε

ISO catalog number TNMG110304FN TNMG110308FN

ANSI catalog number TNMG221FN TNMG222FN

mm in mm in mm in 6,35 1/4 11,00 .433 0,4 1/64 6,35 1/4 11,00 .433 0,8 1/32

TNMG160404FN TNMG160408FN

TNMG331FN TNMG332FN

9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

TNMG160412FN TNMG220404FN

TNMG333FN TNMG431FN

TNMG220408FN TNMG220412FN

TNMG432FN TNMG433FN

v v

v v v

9,53 3/8 16,50 .650 1,2 3/64 12,70 1/2 22,00 .866 0,4 1/64

v v v

v v

12,70 1/2 22,00 .866 0,8 1/32 12,70 1/2 22,00 .866 1,2 3/64

v v v

v v

TNMG-FP D

L10

Rε

ISO catalog number TNMG160404FP TNMG160408FP

ANSI catalog number TNMG331FP TNMG332FP

mm in mm in mm in 9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

TNMG160412FP TNMG220404FP

TNMG333FP TNMG431FP

TNMG220408FP

TNMG432FP

B68

v v

9,53 3/8 16,50 .650 1,2 3/64 12,70 1/2 22,00 .866 0,4 1/64

v v

12,70 1/2 22,00 .866 0,8 1/32

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number TNMG160404FW TNMG160408FW

ANSI catalog number TNMG331FW TNMG332FW

mm in mm in mm in 9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

TNMG160412FW

TNMG333FW

9,53 3/8 16,50 .650 1,2 3/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TNMG-FW

v v

TNMG-MN D

L10

Rε

ISO catalog number TNMG160404MN TNMG160408MN

ANSI catalog number TNMG331MN TNMG332MN

mm in mm in mm in 9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

TNMG160412MN TNMG220404MN

TNMG333MN TNMG431MN

9,53 3/8 16,50 .650 1,2 3/64 12,70 1/2 22,00 .866 0,4 1/64

v v v v v

TNMG220408MN TNMG220412MN

TNMG432MN TNMG433MN

12,70 1/2 22,00 .866 0,8 1/32 12,70 1/2 22,00 .866 1,2 3/64

v v v v

TNMG220416MN

TNMG434MN

12,70 1/2 22,00 .866 1,6 1/16

v v v v v v v v

v v v

v v v v v

TNMG-MP D

L10

Rε

ISO catalog number TNMG160404MP TNMG160408MP

ANSI catalog number TNMG331MP TNMG332MP

mm in mm in mm in 9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

TNMG160412MP TNMG220408MP

TNMG333MP TNMG432MP

TNMG220412MP TNMG220416MP

TNMG433MP TNMG434MP

v v v

v v

v v v

v v

9,53 3/8 16,50 .650 1,2 3/64 12,70 1/2 22,00 .866 0,8 1/32

v v

12,70 1/2 22,00 .866 1,2 3/64 12,70 1/2 22,00 .866 1,6 1/16

v v

C2–C70

www.kennametal.com

C72–C118

v v

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B69

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TNMG-MS

ISO catalog number TNMG160402MS TNMG160404MS

ANSI catalog number TNMG3305MS TNMG331MS

mm in mm in mm in 9,53 3/8 16,50 .650 0,2 .008 9,53 3/8 16,50 .650 0,4 1/64

TNMG160408MS TNMG220404MS

TNMG332MS TNMG431MS

9,53 3/8 16,50 .650 0,8 1/32 12,70 1/2 22,00 .866 0,4 1/64

TNMG220408MS TNMG220412MS

TNMG432MS TNMG433MS

12,70 1/2 22,00 .866 0,8 1/32 12,70 1/2 22,00 .866 1,2 3/64

TNMG270608MS TNMG270616MS

TNMG542MS TNMG544MS

15,88 5/8 27,50 1.083 0,8 1/32 15,88 5/8 27,50 1.083 1,6 1/16

v v

TNMG-MW D ISO catalog number TNMG160408MW TNMG160412MW

ANSI catalog number TNMG332MW TNMG333MW

L10

Rε

mm in mm in mm in 9,53 3/8 16,50 .650 0,8 1/32 9,53 3/8 16,50 .650 1,2 3/64

v v v v v v

TNMG-P D

L10

Rε

ISO catalog number TNMG160404P TNMG160408P

ANSI catalog number TNMG331P TNMG332P

mm in mm in mm in 9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

TNMG220404P TNMG220408P

TNMG431P TNMG432P

12,70 1/2 22,00 .866 0,4 1/64 12,70 1/2 22,00 .866 0,8 1/32

v v

TNMG220412P

TNMG433P

12,70 1/2 22,00 .866 1,2 3/64

v v

v v v

v v

v v v

TNMG-RM D ISO catalog number TNMG330924RM

B70

ANSI catalog number TNMG666RM

L10

Rε

mm in mm in mm in 19,05 3/4 32,99 1.299 2,4 3/32

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TNMG-RN

ISO catalog number TNMG160408RN TNMG160412RN

ANSI catalog number TNMG332RN TNMG333RN

mm in mm in mm in 9,53 3/8 16,50 .650 0,8 1/32 9,53 3/8 16,50 .650 1,2 3/64

TNMG220408RN TNMG220412RN

TNMG432RN TNMG433RN

12,70 1/2 22,00 .866 0,8 1/32 12,70 1/2 22,00 .866 1,2 3/64

v v v v

TNMG220416RN TNMG270608RN

TNMG434RN TNMG542RN

12,70 1/2 22,00 .866 1,6 1/16 15,88 5/8 27,50 1.083 0,8 1/32

v v

TNMG270612RN TNMG270616RN

TNMG543RN TNMG544RN

15,88 5/8 27,50 1.083 1,2 3/64 15,88 5/8 27,50 1.083 1,6 1/16

v v v v

TNMG330924RN

TNMG666RN

19,05 3/4 33,00 1.299 2,4 3/32

v v v v

v v v v v v

v v v v

v v v

TNMG-RP D

L10

Rε

ISO catalog number TNMG160408RP TNMG160412RP

ANSI catalog number TNMG332RP TNMG333RP

mm in mm in mm in 9,53 3/8 16,50 .650 0,8 1/32 9,53 3/8 16,50 .650 1,2 3/64

TNMG160416RP TNMG220408RP

TNMG334RP TNMG432RP

TNMG220412RP TNMG220416RP

v v v v

v v v v v

v v v v

v v v

v v

9,53 3/8 16,50 .650 1,6 1/16 12,70 1/2 22,00 .866 0,8 1/32

v v v v

TNMG433RP TNMG434RP

12,70 1/2 22,00 .866 1,2 3/64 12,70 1/2 22,00 .866 1,6 1/16

v v v v

v v

TNMG220432RP TNMG270612RP

TNMG438RP TNMG543RP

12,70 1/2 22,00 .866 3,2 1/8 15,88 5/8 27,50 1.083 1,2 3/64

v v

TNMG270616RP TNMG330924RP

TNMG544RP TNMG666RP

15,88 5/8 27,50 1.083 1,6 1/16 19,05 3/4 33,00 1.299 2,4 3/32

v v

v v v v

TNMG-UN D

L10

Rε

ISO catalog number TNMG160408UN TNMG160412UN

ANSI catalog number TNMG332UN TNMG333UN

mm in mm in mm in 9,53 3/8 16,50 .650 0,8 1/32 9,53 3/8 16,50 .650 1,2 3/64

TNMG160416UN TNMG220408UN

TNMG334UN TNMG432UN

9,53 3/8 16,50 .650 1,6 1/16 12,70 1/2 22,00 .866 0,8 1/32

v v v

TNMG220412UN TNMG220416UN

TNMG433UN TNMG434UN

12,70 1/2 22,00 .866 1,2 3/64 12,70 1/2 22,00 .866 1,6 1/16

v v v

C2–C70

www.kennametal.com

C72–C118

C119–C129

v v v v v v

v v v

v v

C130–C161

B10–B23

B24–B31

B32–B37

B71

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number TNMG160404UP TNMG160408UP

ANSI catalog number TNMG331UP TNMG332UP

mm in mm in mm in 9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

TNMG160412UP TNMG220408UP

TNMG333UP TNMG432UP

TNMG220412UP

TNMG433UP

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TNMG-UP

v v

9,53 3/8 16,50 .650 1,2 3/64 12,70 1/2 22,00 .866 0,8 1/32

v v

v v v

12,70 1/2 22,00 .866 1,2 3/64

v v v

TNMM-RM D

L10

Rε

ISO catalog number TNMM160408RM TNMM160412RM

ANSI catalog number TNMM332RM TNMM333RM

mm in mm in mm in 9,53 3/8 16,50 .650 0,8 1/32 9,53 3/8 16,50 .650 1,2 3/64

TNMM220408RM TNMM220412RM

TNMM432RM TNMM433RM

12,70 1/2 22,00 .866 0,8 1/32 12,70 1/2 22,00 .866 1,2 3/64

TNMM220416RM TNMM270612RM

TNMM434RM TNMM543RM

12,70 1/2 22,00 .866 1,6 1/16 15,88 5/8 27,50 1.083 1,2 3/64

TNMM270616RM

TNMM544RM

15,88 5/8 27,50 1.083 1,6 1/16

v v v v v v v v v v v v v v

TNMM-RP D

L10

Rε

ISO catalog number TNMM160408RP TNMM160412RP

ANSI catalog number TNMM332RP TNMM333RP

mm in mm in mm in 9,53 3/8 16,50 .650 0,8 1/32 9,53 3/8 16,50 .650 1,2 3/64

TNMM220408RP TNMM220412RP

TNMM432RP TNMM433RP

12,70 1/2 22,00 .866 0,8 1/32 12,70 1/2 22,00 .866 1,2 3/64

v v

v v v

TNMM220416RP TNMM270616RP

TNMM434RP TNMM544RP

12,70 1/2 22,00 .866 1,6 1/16 15,88 5/8 27,50 1.083 1,6 1/16

v v

B72

v v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TNMP

ISO catalog number TNMP160404 TNMP160408

ANSI catalog number TNMP331 TNMP332

mm in mm in mm in 9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

TNMP160416 TNMP220404

TNMP334 TNMP431

9,53 3/8 16,50 .650 1,6 1/16 12,70 1/2 22,00 .866 0,4 1/64

TNMP220408 TNMP220412

TNMP432 TNMP433

12,70 1/2 22,00 .866 0,8 1/32 12,70 1/2 22,00 .866 1,2 3/64

v v

TNMP220416 TNMP220424

TNMP434 TNMP436

12,70 1/2 22,00 .866 1,6 1/16 12,70 1/2 22,00 .866 2,4 3/32

v v v v

v v

TNMP-K D

L10

Rε

ISO catalog number TNMP160404K TNMP160408K

ANSI catalog number TNMP331K TNMP332K

mm in mm in mm in 9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

v v

TNMP220408K

TNMP432K

12,70 1/2 22,00 .866 0,8 1/32

TNMS D

L10

Rε

ISO catalog number TNMS160404 TNMS160408

ANSI catalog number TNMS331 TNMS332

mm in mm in mm in 9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

TNMS220404 TNMS220408

TNMS431 TNMS432

TNMS220412 TNMS270608

TNMS433 TNMS542

12,70 1/2 22,00 .866 0,4 1/64 12,70 1/2 22,00 .866 0,8 1/32

12,70 1/2 22,00 .866 1,2 3/64 15,88 5/8 27,50 1.083 0,8 1/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B73

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v

L10

Rε

ISO catalog number VNGG160401FS VNGG160402FS

ANSI catalog number VNGG330FS VNGG3305FS

mm in mm in mm in 9,53 3/8 16,61 .654 0,1 .004 9,53 3/8 16,61 .654 0,2 .008

VNGG160404FS VNGG160408FS

VNGG331FS VNGG332FS

9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

VNGG160412FS

VNGG333FS

9,53 3/8 16,61 .654 1,2 3/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

VNGG-FS

v v

VNGG-LF D

L10

Rε

ISO catalog number VNGG160402LF VNGG160404LF

ANSI catalog number VNGG3305LF VNGG331LF

mm in mm in mm in 9,53 3/8 16,61 .654 0,2 .008 9,53 3/8 16,61 .654 0,4 1/64

VNGG160408LF VNGG220408LF

VNGG332LF VNGG432LF

9,53 3/8 16,61 .654 0,8 1/32 12,70 1/2 22,14 .872 0,8 1/32

v v

v v v v

VNGP D

B74

L10

Rε

ISO catalog number VNGP160401 VNGP160402

ANSI catalog number VNGP330 VNGP3305

mm in mm in mm in 9,53 3/8 16,61 .654 0,1 .004 9,53 3/8 16,61 .654 0,2 .008

VNGP220404 VNGP220408

VNGP431 VNGP432

12,70 1/2 22,14 .872 0,4 1/64 12,70 1/2 22,14 .872 0,8 1/32

v v

VNGP220412

VNGP433

12,70 1/2 22,14 .872 1,2 3/64

v v

v v v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number VNGP160404K VNGP160408K

ANSI catalog number VNGP331K VNGP332K

L10

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

VNGP-K

v v

VNMA D ISO catalog number VNMA160408

ANSI catalog number VNMA332

L10

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,8 1/32

v v v

VNMG D

L10

Rε

ISO catalog number VNMG160408 VNMG160412

ANSI catalog number VNMG332 VNMG333

mm in mm in mm in 9,53 3/8 16,61 .654 0,8 1/32 9,53 3/8 16,61 .654 1,2 3/64

VNMG220408 VNMG220412

VNMG432 VNMG433

12,70 1/2 22,14 .872 0,8 1/32 12,70 1/2 22,14 .872 1,2 3/64

v v v v

VNMG-FF D ISO catalog number VNMG160404FF VNMG160408FF

ANSI catalog number VNMG331FF VNMG332FF

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

C2–C70

www.kennametal.com

L10

C72–C118

v v

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B75

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number VNMG160404FN VNMG160408FN

ANSI catalog number VNMG331FN VNMG332FN

L10

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

VNMG-FN

v v v

VNMG-FP D ISO catalog number VNMG160404FP VNMG160408FP

ANSI catalog number VNMG331FP VNMG332FP

L10

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

v v

VNMG-MN D

L10

Rε

ISO catalog number VNMG160404MN VNMG160408MN

ANSI catalog number VNMG331MN VNMG332MN

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

v v v v

VNMG160412MN

VNMG333MN

9,53 3/8 16,61 .654 1,2 3/64

v v v

v v v v

VNMG-MP D

L10

Rε

ISO catalog number VNMG160404MP VNMG160408MP

ANSI catalog number VNMG331MP VNMG332MP

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

v v v

v v

v v v

v v

VNMG160412MP

VNMG333MP

9,53 3/8 16,61 .654 1,2 3/64

v v

B76

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number VNMG160401MS VNMG160402MS

ANSI catalog number VNMG330MS VNMG3305MS

mm in mm in mm in 9,53 3/8 16,61 .654 0,1 .004 9,53 3/8 16,61 .654 0,2 .008

VNMG160404MS VNMG160408MS

VNMG331MS VNMG332MS

9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

VNMG220404MS VNMG220408MS

VNMG431MS VNMG432MS

12,70 1/2 22,14 .872 0,4 1/64 12,70 1/2 22,14 .872 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

VNMG-MS

v v

VNMG-P D ISO catalog number VNMG160404P VNMG160408P

ANSI catalog number VNMG331P VNMG332P

L10

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

v v

VNMG-RN D

L10

Rε

ISO catalog number VNMG160408RN VNMG160412RN

ANSI catalog number VNMG332RN VNMG333RN

mm in mm in mm in 9,53 3/8 16,61 .654 0,8 1/32 9,53 3/8 16,61 .654 1,2 3/64

VNMG220408RN VNMG220412RN

VNMG432RN VNMG433RN

12,70 1/2 22,14 .872 0,8 1/32 12,70 1/2 22,14 .872 1,2 3/64

v v v v v v v v v v v

VNMG-RP D ISO catalog number VNMG160408RP VNMG160412RP

ANSI catalog number VNMG332RP VNMG333RP

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,8 1/32 9,53 3/8 16,61 .654 1,2 3/64

C2–C70

www.kennametal.com

L10

C72–C118

v v

v v v

v v v v

v v

v v v v v

v v v v

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B77

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number VNMG160404UN VNMG160408UN

ANSI catalog number VNMG331UN VNMG332UN

L10

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

VNMG-UN

v v v v v v

VNMG-UP D

L10

Rε

ISO catalog number VNMG160404UP VNMG160408UP

ANSI catalog number VNMG331UP VNMG332UP

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

v v

VNMG160412UP

VNMG333UP

9,53 3/8 16,61 .654 1,2 3/64

v v

VNMP D ISO catalog number VNMP160404 VNMP160408

ANSI catalog number VNMP331 VNMP332

L10

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

v v v v

VNMP-K D ISO catalog number VNMP160404K VNMP160408K

ANSI catalog number VNMP331K VNMP332K

L10

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

v v

VNMS D ISO catalog number VNMS160404 VNMS160408

B78

ANSI catalog number VNMS331 VNMS332

L10

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number WNGG080404FS WNGG080408FS

ANSI catalog number WNGG431FS WNGG432FS

L10

Rε

mm in mm in mm in 12,70 1/2 8,69 .342 0,4 1/64 12,70 1/2 8,69 .342 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

WNGG-FS

WNGG-LF D

L10

Rε

ISO catalog number WNGG080401LF WNGG080402LF

ANSI catalog number WNGG430LF WNGG4305LF

mm in mm in mm in 12,70 1/2 8,69 .342 0,1 .004 12,70 1/2 8,69 .342 0,2 .008

WNGG080404LF WNGG080408LF

WNGG431LF WNGG432LF

12,70 1/2 8,69 .342 0,4 1/64 12,70 1/2 8,69 .342 0,8 1/32

v v v v v v v v

WNGP-K D ISO catalog number WNGP080408K

ANSI catalog number WNGP432K

L10

Rε

mm in mm in mm in 12,70 1/2 8,69 .342 0,8 1/32

WNMA D

L10

Rε

ISO catalog number WNMA060408 WNMA060412

ANSI catalog number WNMA332 WNMA333

mm in mm in mm in 9,53 3/8 6,52 .257 0,8 1/32 9,53 3/8 6,52 .257 1,2 3/64

WNMA080408 WNMA080412

WNMA432 WNMA433

12,70 1/2 8,69 .342 0,8 1/32 12,70 1/2 8,69 .342 1,2 3/64

v v v

WNMA080416

WNMA434

12,70 1/2 8,69 .342 1,6 1/16

v v v

C2–C70

www.kennametal.com

C72–C118

C119–C129

v v v v v

v v v

C130–C161

B10–B23

B24–B31

B32–B37

B79

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number WNMG060404FF WNMG060408FF

ANSI catalog number WNMG331FF WNMG332FF

mm in mm in mm in 9,53 3/8 6,52 .257 0,4 1/64 9,53 3/8 6,52 .257 0,8 1/32

WNMG080404FF WNMG080408FF

WNMG431FF WNMG432FF

12,70 1/2 8,69 .342 0,4 1/64 12,70 1/2 8,69 .342 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

WNMG-FF

v v

WNMG-FN D

L10

Rε

ISO catalog number WNMG060404FN WNMG060408FN

ANSI catalog number WNMG331FN WNMG332FN

mm in mm in mm in 9,53 3/8 6,52 .257 0,4 1/64 9,53 3/8 6,52 .257 0,8 1/32

WNMG080404FN WNMG080408FN

WNMG431FN WNMG432FN

12,70 1/2 8,69 .342 0,4 1/64 12,70 1/2 8,69 .342 0,8 1/32

WNMG080412FN

WNMG433FN

12,70 1/2 8,69 .342 1,2 3/64

v v

v v v

v v

WNMG-FP D

L10

Rε

ISO catalog number WNMG060404FP WNMG060408FP

ANSI catalog number WNMG331FP WNMG332FP

mm in mm in mm in 9,53 3/8 6,52 .257 0,4 1/64 9,53 3/8 6,52 .257 0,8 1/32

WNMG080404FP WNMG080408FP

WNMG431FP WNMG432FP

12,70 1/2 8,69 .342 0,4 1/64 12,70 1/2 8,69 .342 0,8 1/32

WNMG080412FP

WNMG433FP

12,70 1/2 8,69 .342 1,2 3/64

v v

WNMG-FW D

L10

Rε

ISO catalog number WNMG060404FW WNMG060408FW

ANSI catalog number WNMG331FW WNMG332FW

mm in mm in mm in 9,53 3/8 6,52 .257 0,4 1/64 9,53 3/8 6,52 .257 0,8 1/32

WNMG060412FW WNMG080404FW

WNMG333FW WNMG431FW

WNMG080408FW WNMG080412FW

WNMG432FW WNMG433FW

B80

v v

9,53 3/8 6,52 .257 1,2 3/64 12,70 1/2 8,69 .342 0,4 1/64

v v

12,70 1/2 8,69 .342 0,8 1/32 12,70 1/2 8,69 .342 1,2 3/64

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number WNMG060404MN WNMG060408MN

ANSI catalog number WNMG331MN WNMG332MN

mm in mm in mm in 9,53 3/8 6,52 .257 0,4 1/64 9,53 3/8 6,52 .257 0,8 1/32

WNMG060412MN WNMG080408MN

WNMG333MN WNMG432MN

9,53 3/8 6,52 .257 1,2 3/64 12,70 1/2 8,69 .342 0,8 1/32

WNMG080412MN WNMG080416MN

WNMG433MN WNMG434MN

12,70 1/2 8,69 .342 1,2 3/64 12,70 1/2 8,69 .342 1,6 1/16

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

WNMG-MN

v v v v v v v v v v v v v v v

WNMG-MP D

L10

Rε

ISO catalog number WNMG060404MP WNMG060408MP

ANSI catalog number WNMG331MP WNMG332MP

mm in mm in mm in 9,53 3/8 6,52 .257 0,4 1/64 9,53 3/8 6,52 .257 0,8 1/32

WNMG060412MP WNMG080408MP

WNMG333MP WNMG432MP

9,53 3/8 6,52 .257 1,2 3/64 12,70 1/2 8,69 .342 0,8 1/32

v v

v v v

v v

WNMG080412MP

WNMG433MP

12,70 1/2 8,69 .342 1,2 3/64

v v v

v v

v v v

v v

WNMG-MS D

L10

Rε

ISO catalog number WNMG060408MS WNMG080401MS

ANSI catalog number WNMG332MS WNMG430MS

mm in mm in mm in 9,53 3/8 6,52 .257 0,8 1/32 12,70 1/2 8,69 .342 0,1 .004

WNMG080402MS WNMG080404MS

WNMG4305MS WNMG431MS

12,70 1/2 8,69 .342 0,2 .008 12,70 1/2 8,69 .342 0,4 1/64

v v

WNMG080408MS

WNMG432MS

12,70 1/2 8,69 .342 0,8 1/32

v v

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

v v

B24–B31

B32–B37

B81

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number WNMG060408MW WNMG060412MW

ANSI catalog number WNMG332MW WNMG333MW

mm in mm in mm in 9,53 3/8 6,52 .257 0,8 1/32 9,53 3/8 6,52 .257 1,2 3/64

WNMG080408MW WNMG080412MW

WNMG432MW WNMG433MW

12,70 1/2 8,69 .342 0,8 1/32 12,70 1/2 8,69 .342 1,2 3/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

WNMG-MW

v v v v v v v v v v v

WNMG-P D ISO catalog number WNMG080404P WNMG080408P

ANSI catalog number WNMG431P WNMG432P

L10

Rε

mm in mm in mm in 12,70 1/2 8,69 .342 0,4 1/64 12,70 1/2 8,69 .342 0,8 1/32

v v v v

WNMG-RN D

L10

Rε

ISO catalog number WNMG060408RN WNMG060412RN

ANSI catalog number WNMG332RN WNMG333RN

mm in mm in mm in 9,53 3/8 6,52 .257 0,8 1/32 9,53 3/8 6,52 .257 1,2 3/64

WNMG080408RN WNMG080412RN

WNMG432RN WNMG433RN

12,70 1/2 8,69 .342 0,8 1/32 12,70 1/2 8,69 .342 1,2 3/64

v v v v v

WNMG080416RN

WNMG434RN

12,70 1/2 8,69 .342 1,6 1/16

v v v

B82

v v v v

v v v v v

www.kennametal.com

ISO/ANSI Carbide Inserts Kenloc™ Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number WNMG060408RP WNMG060412RP

ANSI catalog number WNMG332RP WNMG333RP

mm in mm in mm in 9,53 3/8 6,52 .257 0,8 1/32 9,53 3/8 6,52 .257 1,2 3/64

WNMG080408RP WNMG080412RP

WNMG432RP WNMG433RP

12,70 1/2 8,69 .342 0,8 1/32 12,70 1/2 8,69 .342 1,2 3/64

WNMG080416RP

WNMG434RP

12,70 1/2 8,69 .342 1,6 1/16

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

WNMG-RP

v v

v v v

v v

v v v v

v v v v v v v v v v v

v v v v

v v v v v v v v v v v

v v v v

v v

WNMG-UN D

L10

Rε

ISO catalog number WNMG060404UN WNMG060408UN

ANSI catalog number WNMG331UN WNMG332UN

mm in mm in mm in 9,53 3/8 6,52 .257 0,4 1/64 9,53 3/8 6,52 .257 0,8 1/32

WNMG060412UN WNMG080404UN

WNMG333UN WNMG431UN

9,53 3/8 6,52 .257 1,2 3/64 12,70 1/2 8,69 .342 0,4 1/64

v v v

WNMG080408UN WNMG080412UN

WNMG432UN WNMG433UN

12,70 1/2 8,69 .342 0,8 1/32 12,70 1/2 8,69 .342 1,2 3/64

v v v

WNMG080416UN

WNMG434UN

12,70 1/2 8,69 .342 1,6 1/16

v v

v v v v v v

v v v

WNMG-UP D

L10

Rε

ISO catalog number WNMG060408UP WNMG080408UP

ANSI catalog number WNMG332UP WNMG432UP

mm in mm in mm in 9,53 3/8 6,52 .257 0,8 1/32 12,70 1/2 8,69 .342 0,8 1/32

v v v v v

v v

WNMG080412UP

WNMG433UP

12,70 1/2 8,69 .342 1,2 3/64

v v v

v v

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B83

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kendex™ Positive Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number CPGN120304 CPGN120308

ANSI catalog number CPG421 CPG422

Rε

L10

mm in mm in mm in 12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CPG

v v

RCGV D ISO catalog number RCGV060400 RCGV090700

ANSI catalog number RCGV23 RCGV35

RCGV120700

RCGV45

Rε

L10

mm in mm 6,35 1/4 — 9,53 3/8 —

in mm — — — —

in — —

v v

12,70 1/2

—

v v

—

RCGV-MP D

B84

ISO catalog number RCGX060400MP RCGX090700MP

ANSI catalog number RCGV23MP RCGV35MP

RCGX120700MP

RCGV45MP

Rε

L10

mm in mm 6,35 1/4 — 9,53 3/8 —

in mm — — — —

in — —

12,70 1/2

—

www.kennametal.com

ISO/ANSI Carbide Inserts Kendex™ Positive Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number RPGN120300

ANSI catalog number RPG42

Rε

L10

mm in mm 12,70 1/2 —

in —

mm —

in —

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

RPG

RPGV D ISO catalog number RPGV060400 RPGV090700

ANSI catalog number RPGV23 RPGV35

RPGV120700

RPGV45

Rε

L10

mm in mm 6,35 1/4 — 9,53 3/8 —

in — —

mm — —

in — —

12,70 1/2

—

v v

v v v

RPGV-MP D ISO catalog number RPGX060400MP RPGX090700MP

ANSI catalog number RPGV23MP RPGV35MP

RPGV120700MP

RPGV45MP

Rε

L10

mm in mm 6,35 1/4 — 9,53 3/8 —

in — —

mm — —

in — —

12,70 1/2

—

v v

SPG D

L10

Rε

ISO catalog number SPGN090304 SPGN090308

ANSI catalog number SPG321 SPG322

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

SPGN090312 SPGN120304

SPG323 SPG421

9,53 3/8 9,53 .375 1,2 3/64 12,70 1/2 12,70 .500 0,4 1/64

SPGN120308 SPGN120312

SPG422 SPG423

SPGN120316 SPGN120412

v v

12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

v v

SPG424 SPG433

12,70 1/2 12,70 .500 1,6 1/16 12,70 1/2 12,70 .500 1,2 3/64

v v

SPGN190408 SPGN190412

SPG632 SPG633

19,05 3/4 19,05 .750 0,8 1/32 19,05 3/4 19,05 .750 1,2 3/64

v v v

SPGN190416

SPG634

19,05 3/4 19,05 .750 1,6 1/16

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

v v

B24–B31

B32–B37

B85

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Kendex™ Positive Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number SPGR090308K SPGR120308K

ANSI catalog number SPGF322 SPGF422

L10

Rε

mm in mm in mm in 9,53 3/8 9,53 .375 0,8 1/32 12,70 1/2 12,70 .500 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SPGR–K

v v v

SPUN D

L10

Rε

ISO catalog number SPUN120304 SPUN120308

ANSI catalog number SPU421 SPU422

mm in mm in mm in 12,70 1/2 12,70 .500 0,4 1/64 12,70 1/2 12,70 .500 0,8 1/32

SPUN120312 SPUN190412

SPU423 SPU633

12,70 1/2 12,70 .500 1,2 3/64 19,05 3/4 19,05 .750 1,2 3/64

v v v v

TPGN D

B86

L10

Rε

ISO catalog number TPGN060104 TPGN110304

ANSI catalog number TPGE521 TPG221

mm in mm in mm in 3,97 5/32 6,88 .271 0,4 1/64 6,35 1/4 11,00 .433 0,4 1/64

TPGN110308 TPGN160302

TPG222 TPG3205

TPGN160304 TPGN160308

v v v

v v

6,35 1/4 11,00 .433 0,8 1/32 9,53 3/8 16,50 .650 0,2 .008

v v

TPG321 TPG322

9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

v v

TPGN160312 TPGN160316

TPG323 TPG324

9,53 3/8 16,50 .650 1,2 3/64 9,53 3/8 16,50 .650 1,6 1/16

v v

TPGN220404 TPGN220408

TPG431 TPG432

12,70 1/2 22,00 .866 0,4 1/64 12,70 1/2 22,00 .866 0,8 1/32

v v

TPGN220412 TPGN220416

TPG433 TPG434

12,70 1/2 22,00 .866 1,2 3/64 12,70 1/2 22,00 .866 1,6 1/16

v v

TPGN220432

TPG438

12,70 1/2 22,00 .866 3,2

1/8

www.kennametal.com

ISO/ANSI Carbide Inserts Kendex™ Positive Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TPGR–K

ISO catalog number TPGR110304K TPGR110308K

ANSI catalog number TPGF221 TPGF222

mm in mm in mm in 6,35 1/4 11,00 .433 0,4 1/64 6,35 1/4 11,00 .433 0,8 1/32

TPGR160304K TPGR160308K

TPGF321 TPGF322

9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

TPGR220404K TPGR220408K

TPGF431 TPGF432

12,70 1/2 22,00 .866 0,4 1/64 12,70 1/2 22,00 .866 0,8 1/32

v v v v v v v v v v v v

TPUN D

L10

Rε

ISO catalog number TPUN110304 TPUN110308

ANSI catalog number TPU221 TPU222

mm in mm in mm in 6,35 1/4 11,00 .433 0,4 1/64 6,35 1/4 11,00 .433 0,8 1/32

TPUN160304 TPUN160308

TPU321 TPU322

9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

TPUN220408 TPUN220412

TPU432 TPU433

12,70 1/2 22,00 .866 0,8 1/32 12,70 1/2 22,00 .866 1,2 3/64

C2–C70

www.kennametal.com

C72–C118

C119–C129

v v

C130–C161

B10–B23

B24–B31

B32–B37

B87

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CCGT-HP

ISO catalog number CCGT060202HP CCGT060204HP

ANSI catalog number CCGT21505HP CCGT2151HP

mm in mm in mm in 6,35 1/4 6,45 .254 0,2 .008 6,35 1/4 6,45 .254 0,4 1/64

CCGT060208HP CCGT09T302HP

CCGT2152HP CCGT32505HP

6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,2 .008

CCGT09T304HP CCGT09T308HP

CCGT3251HP CCGT3252HP

9,53 3/8 9,67 .381 0,4 1/64 9,53 3/8 9,67 .381 0,8 1/32

CCGT09T316HP CCGT120401HP

CCGT3254HP CCGT430HP

9,53 3/8 9,67 .381 1,6 1/16 12,70 1/2 12,90 .508 0,1 .004

CCGT120402HP CCGT120404HP

CCGT4305HP CCGT431HP

12,70 1/2 12,90 .508 0,2 .008 12,70 1/2 12,90 .508 0,4 1/64

CCGT120408HP

CCGT432HP

12,70 1/2 12,90 .508 0,8 1/32

v v

CCGT-LF D

L10

Rε

ISO catalog number CCGT0602X0LF CCGT060201LF

ANSI catalog number CCGT215X0LF CCGT2150LF

CCGT060202LF CCGT060204LF

CCGT21505LF CCGT2151LF

6,35 1/4 6,45 .254 0,2 6,35 1/4 6,45 .254 0,4

CCGT060208LF CCGT09T3X0LF

CCGT2152LF CCGT325X0LF

6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,0 .0015

CCGT09T301LF CCGT09T302LF

CCGT3250LF CCGT32505LF

9,53 3/8 9,67 .381 0,1 9,53 3/8 9,67 .381 0,2

.004 .008

CCGT09T304LF CCGT09T308LF

CCGT3251LF CCGT3252LF

9,53 3/8 9,67 .381 0,4 9,53 3/8 9,67 .381 0,8

1/64 1/32

mm in mm in mm in 6,35 1/4 6,45 .254 0,0 .0015 6,35 1/4 6,45 .254 0,1 .004 .008 1/64

v v

v v v

v v

CCMT-11 D

B88

L10

Rε

ISO catalog number CCMT06020411 CCMT09T30411

ANSI catalog number CCMT215111 CCMT325111

CCMT09T30811 CCMT12040411

CCMT325211 CCMT43111

9,53 3/8 9,67 .381 0,8 12,70 1/2 12,90 .508 0,4

1/32 1/64

CCMT12040811

CCMT43211

12,70 1/2 12,90 .508 0,8

1/32

mm in mm in mm in 6,35 1/4 6,45 .254 0,4 1/64 9,53 3/8 9,67 .381 0,4 1/64

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number CCMT060202FP CCMT060204FP

ANSI catalog number CCMT21505FP CCMT2151FP

mm in mm in mm in 6,35 1/4 6,45 .254 0,2 .008 6,35 1/4 6,45 .254 0,4 1/64

CCMT060208FP CCMT09T302FP

CCMT2152FP CCMT32505FP

CCMT09T304FP CCMT09T308FP

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CCMT-FP

v v

v v v

6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,2 .008

v v v

CCMT3251FP CCMT3252FP

9,53 3/8 9,67 .381 0,4 1/64 9,53 3/8 9,67 .381 0,8 1/32

v v v

CCMT120404FP CCMT120408FP

CCMT431FP CCMT432FP

12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

v v v

CCMT120412FP

CCMT433FP

12,70 1/2 12,90 .508 1,2 3/64

v v v

v v

CCMT-FW D

L10

Rε

ISO catalog number CCMT060202FW CCMT060204FW

ANSI catalog number CCMT21505FW CCMT2151FW

mm in mm in mm in 6,35 1/4 6,45 .254 0,2 .008 6,35 1/4 6,45 .254 0,4 1/64

CCMT060208FW CCMT09T304FW

CCMT2152FW CCMT3251FW

6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,4 1/64

v v

CCMT09T308FW

CCMT3252FW

9,53 3/8 9,67 .381 0,8 1/32

v v

CCMT-LF D

L10

Rε

ISO catalog number CCMT060202LF CCMT060204LF

ANSI catalog number CCMT21505LF CCMT2151LF

mm in mm in mm in 6,35 1/4 6,45 .254 0,2 .008 6,35 1/4 6,45 .254 0,4 1/64

CCMT060208LF CCMT09T302LF

CCMT2152LF CCMT32505LF

CCMT09T304LF CCMT09T308LF

v v

v v v v v v

v v

v v v v v v

v v

v v v v

v v v v v v

6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,2 .008

v v v v

v v v v v

CCMT3251LF CCMT3252LF

9,53 3/8 9,67 .381 0,4 1/64 9,53 3/8 9,67 .381 0,8 1/32

v v v v v v v v

CCMT120404LF CCMT120408LF

CCMT431LF CCMT432LF

12,70 1/2 12,90 .508 0,4 1/64 12,70 1/2 12,90 .508 0,8 1/32

v v v v v v v

CCMT120412LF

CCMT433LF

12,70 1/2 12,90 .508 1,2 3/64

v v

C2–C70

www.kennametal.com

C72–C118

C119–C129

v v v

v v v v v v v

C130–C161

B10–B23

B24–B31

B32–B37

B89

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CCMT-MF

ISO catalog number CCMT060204MF CCMT09T304MF

ANSI catalog number CCMT2151MF CCMT3251MF

mm in mm in mm in 6,35 1/4 6,45 .254 0,4 1/64 9,53 3/8 9,67 .381 0,4 1/64

CCMT09T308MF CCMT09T312MF

CCMT3252MF CCMT3253MF

9,53 3/8 9,67 .381 0,8 1/32 9,53 3/8 9,67 .381 1,2 3/64

v v v

v v v v v

v v

CCMT120408MF CCMT120412MF

CCMT432MF CCMT433MF

12,70 1/2 12,90 .508 0,8 1/32 12,70 1/2 12,90 .508 1,2 3/64

v v v

v v v v v

v v

v v v v

v v

v v v

v v

v v v

v v

v v v

v v v v v

v v v

v v v v v v

CCMT-MP D

L10

Rε

ISO catalog number CCMT060204MP CCMT09T304MP

ANSI catalog number CCMT2151MP CCMT3251MP

mm in mm in mm in 6,35 1/4 6,45 .254 0,4 1/64 9,53 3/8 9,67 .381 0,4 1/64

CCMT09T308MP CCMT09T312MP

CCMT3252MP CCMT3253MP

9,53 3/8 9,67 .381 0,8 1/32 9,53 3/8 9,67 .381 1,2 3/64

v v

v v v

CCMT120408MP CCMT120412MP

CCMT432MP CCMT433MP

12,70 1/2 12,90 .508 0,8 1/32 12,70 1/2 12,90 .508 1,2 3/64

v v

v v v

v v

CCMT-MW D

L10

Rε

ISO catalog number CCMT09T304MW CCMT09T308MW

ANSI catalog number CCMT3251MW CCMT3252MW

mm in mm in mm in 9,53 3/8 9,67 .381 0,40 1/64 9,53 3/8 9,67 .381 0,80 1/32

CCMT120404MW CCMT120408MW

CCMT431MW CCMT432MW

12,70 1/2 12,90 .508 0,40 1/64 12,70 1/2 12,90 .508 0,80 1/32

CCMT-UF D

L10

Rε

ISO catalog number CCMT060204UF CCMT09T302UF

ANSI catalog number CCMT2151UF CCMT32505UF

mm in mm in mm in 6,35 1/4 6,45 .254 0,4 1/64 9,53 3/8 9,67 .381 0,2 .008

CCMT09T304UF CCMT09T308UF

CCMT3251UF CCMT3252UF

9,53 3/8 9,67 .381 0,4 1/64 9,53 3/8 9,67 .381 0,8 1/32

B90

v v v

v v

v v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

Rε

L10

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CCMW

ISO catalog number CCMW060204 CCMW09T304

ANSI catalog number CCMW2151 CCMW3251

mm in mm in mm in 6,35 1/4 6,45 .254 0,4 1/64 9,53 3/8 9,67 .381 0,4 1/64

CCMW09T308 CCMW120408

CCMW3252 CCMW432

9,53 3/8 9,67 .381 0,8 1/32 12,70 1/2 12,90 .508 0,8 1/32

CCMW120412

CCMW433

12,70 1/2 12,90 .508 1,2 3/64

v v

Detail of 0.015" (0,38mm) insert.

CDG D ISO catalog number

CDG127050R

ANSI catalog number right hand CDG120202R

3,96 .156 0,64 .025 0,51 .020

CDG127064R CDG127076R

CDG120252R CDG120302R

3,96 .156 1,02 .040 0,64 .025 3,96 .156 1,02 .040 0,76 .030

v v

CDG127102R

CDG120402R

3,96 .156 1,02 .040 1,02 .040

v v

CDHB D

L10

Rε

ISO catalog number CDHBS4T0S0 CDHBS4T0X0

ANSI catalog number CDHB120601 CDHB1206X0

mm in mm in mm in 3,97 5/32 4,03 .159 0,1 .002 3,97 5/32 4,03 .159 0,1 .002

CDHBS4T002 CDHBS4T004

CDHB120605 CDHB12061

3,97 5/32 4,03 .159 0,2 .007 3,97 5/32 4,03 .159 0,4 .015

C2–C70

www.kennametal.com

C72–C118

C119–C129

v v

C130–C161

B10–B23

B24–B31

B32–B37

B91

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number CDHHS4T002R

ANSI catalog number right hand CDHH120605R

Rε

L10 in

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CDHH

3,97 5/32 4,03 .159 0,2 .007

v v

CDHHS4T004R

CDHH12061R left hand

3,97 5/32 4,03 .159 0,4 .015

v v

CDHHS4T002L CDHHS4T004L

CDHH120605L CDHH12061L

3,97 5/32 4,03 .159 0,2 .007 3,97 5/32 4,03 .159 0,4 .015

v v

NOTE: Right-hand insert used left-hand bars. Left-hand insert used right-hand bars.

CDT D ISO catalog number CDT127005R

ANSI catalog number right hand CDT120022R

T in

RC in

3,96 .156 0,64 .025 0,05 .002

v v

CPG D ISO catalog number

CPG190150R

ANSI catalog number right hand CPG2062R

6,35 1/4 1,65 .065 1,52 .060

CPG190150L

left hand CPG2062L

6,35 1/4 1,65 .065 1,52 .060

CPGH (T) D

B92

L10

Rε

ISO catalog number CPGT060202K CPGT060204K

ANSI catalog number CPGM21505 CPGM2151

mm in mm in mm in 6,35 1/4 6,45 .254 0,2 .008 6,35 1/4 6,45 .254 0,4 1/64

CPGT060208K CPGH09T301

CPGM2152 CPGM3250

6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,1 .004

v v v v

v v

CPGH09T302 CPGH09T304

CPGM32505 CPGM3251

9,53 3/8 9,67 .381 0,2 .008 9,53 3/8 9,67 .381 0,4 1/64

v v

CPGH09T308

CPGM3252

9,53 3/8 9,67 .381 0,8 1/32

v v

v v v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number CPGT060202HP CPGT060204HP

ANSI catalog number CPGT21505HP CPGT2151HP

mm in mm in mm in 6,35 1/4 6,45 .254 0,2 .008 6,35 1/4 6,45 .254 0,4 1/64

CPGT060208HP CPGT09T302HP

CPGT2152HP CPGT32505HP

6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,2 .008

CPGT09T304HP CPGT09T308HP

CPGT3251HP CPGT3252HP

9,53 3/8 9,67 .381 0,4 1/64 9,53 3/8 9,67 .381 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CPGT-HP

v v

CPGT-LF D

L10

Rε

ISO catalog number CPGT060201LF CPGT060202LF

ANSI catalog number CPGT2150LF CPGT21505LF

mm in mm in mm in 6,35 1/4 6,45 .254 0,1 .004 6,35 1/4 6,45 .254 0,2 .008

CPGT060204LF CPGT060208LF

CPGT2151LF CPGT2152LF

6,35 1/4 6,45 .254 0,4 1/64 6,35 1/4 6,45 .254 0,8 1/32

CPGT09T302LF CPGT09T304LF

CPGT32505LF CPGT3251LF

9,53 3/8 9,67 .381 0,2 .008 9,53 3/8 9,67 .381 0,4 1/64

CPGT09T308LF

CPGT3252LF

9,53 3/8 9,67 .381 0,8 1/32

CPMT-FP D

L10

Rε

ISO catalog number CPMT050202FP CPMT050204FP

ANSI catalog number CPMT181505FP CPMT18151FP

mm in mm in mm in 5,56 7/32 5,65 .222 0,2 .008 5,56 7/32 5,65 .222 0,4 1/64

CPMT060202FP CPMT060204FP

CPMT21505FP CPMT2151FP

6,35 1/4 6,45 .254 0,2 .008 6,35 1/4 6,45 .254 0,4 1/64

CPMT060208FP CPMT09T302FP

CPMT2152FP CPMT32505FP

CPMT09T304FP CPMT09T308FP

CPMT3251FP CPMT3252FP

v v

v v v

6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,2 .008

v v

v v v

9,53 3/8 9,67 .381 0,4 1/64 9,53 3/8 9,67 .381 0,8 1/32

v v

v v v

v v

v v v

C2–C70

www.kennametal.com

v v

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B93

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number CPMT060202FW CPMT060204FW

ANSI catalog number CPMT21505FW CPMT2151FW

mm in mm in mm in 6,35 1/4 6,45 .254 0,2 .008 6,35 1/4 6,45 .254 0,4 1/64

CPMT060208FW CPMT09T304FW

CPMT2152FW CPMT3251FW

CPMT09T308FW

CPMT3252FW

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CPMT-FW

v v

6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,4 1/64

v v

9,53 3/8 9,67 .381 0,8 1/32

v v

CPMT-LF D

L10

Rε

ISO catalog number CPMT050202LF CPMT050204LF

ANSI catalog number CPMT181505LF CPMT18151LF

mm in mm in mm in 5,56 7/32 5,65 .222 0,2 .008 5,56 7/32 5,65 .222 0,4 1/64

CPMT060202LF CPMT060204LF

CPMT21505LF CPMT2151LF

6,35 1/4 6,45 .254 0,2 .008 6,35 1/4 6,45 .254 0,4 1/64

v v v v

v v v v v

v v

CPMT060208LF CPMT09T302LF

CPMT2152LF CPMT32505LF

6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,2 .008

v v v v

v v v v v

CPMT09T304LF CPMT09T308LF

CPMT3251LF CPMT3252LF

9,53 3/8 9,67 .381 0,4 1/64 9,53 3/8 9,67 .381 0,8 1/32

v v v v

v v v v v

v v

v v v v

v v v v v

v v

CPMT-MF D

L10

Rε

ISO catalog number CPMT060208MF CPMT09T308MF

ANSI catalog number CPMT2152MF CPMT3252MF

mm in mm in mm in 6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,8 1/32

v v

v v v v

v v v

v v v v v

CPMT09T312MF

CPMT3253MF

9,53 3/8 9,67 .381 1,2 3/64

v v

v v v

CPMT-MP D

L10

Rε

ISO catalog number CPMT060208MP CPMT09T308MP

ANSI catalog number CPMT2152MP CPMT3252MP

mm in mm in mm in 6,35 1/4 6,45 .254 0,8 1/32 9,53 3/8 9,67 .381 0,8 1/32

CPMT09T312MP

CPMT3253MP

9,53 3/8 9,67 .381 1,2 3/64

B94

v v v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number CPMT09T304MW CPMT09T308MW

ANSI catalog number CPMT3251MW CPMT3252MW

Rε

L10

mm in mm in mm in 9,53 3/8 9,67 .381 0,4 1/64 9,53 3/8 9,67 .381 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

CPMT-MW

v v

CPMT-UF D ISO catalog number CPMT060204UF CPMT09T304UF

ANSI catalog number CPMT2151UF CPMT3251UF

Rε

L10

mm in mm in mm in 6,35 1/4 6,45 .254 0,4 1/64 9,53 3/8 9,67 .381 0,4 1/64

v v v

CPT D ISO catalog number

CPT190013R

ANSI catalog number right hand CPT20052R

6,35 1/4 1,65 .065 0,13 .005

v v

CPT190013L

left hand CPT20052L

6,35 1/4 1,65 .065 0,13 .005

v v

DCGT-HP D

L10

Rε

ISO catalog number DCGT070202HP DCGT070204HP

ANSI catalog number DCGT21505HP DCGT2151HP

mm in mm in mm in 6,35 1/4 7,75 .305 0,2 .008 6,35 1/4 7,75 .305 0,4 1/64

DCGT070208HP DCGT11T302HP

DCGT2152HP DCGT32505HP

6,35 1/4 7,75 .305 0,8 1/32 9,53 3/8 11,63 .458 0,2 .008

DCGT11T304HP DCGT11T308HP

DCGT3251HP DCGT3252HP

9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

v v

B24–B31

B32–B37

B95

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DCGT-LF

ISO catalog number DCGT0702X0LF DCGT070201LF

ANSI catalog number DCGT215X0LF DCGT2150LF

mm in mm in mm in 6,35 1/4 7,75 .305 0,0 .0015 6,35 1/4 7,75 .305 0,1 .004

DCGT11T3X0LF DCGT11T301LF

DCGT325X0LF DCGT3250LF

9,53 3/8 11,63 .458 0,0 .0015 9,53 3/8 11,63 .458 0,1 .004

v v

DCGT150408LF

DCGT432LF

12,70 1/2 15,50 .610 0,8 1/32

v v

v v v

v v

DCMT-11 D

L10

Rε

ISO catalog number DCMT07020211 DCMT07020411

ANSI catalog number DCMT2150511 DCMT215111

mm in mm in mm in 6,35 1/4 7,75 .305 0,2 .008 6,35 1/4 7,75 .305 0,4 1/64

DCMT11T30411 DCMT11T30811

DCMT325111 DCMT325211

9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

v v v v

DCMT-FP D

L10

Rε

ISO catalog number DCMT070202FP DCMT070204FP

ANSI catalog number DCMT21505FP DCMT2151FP

mm in mm in mm in 6,35 1/4 7,75 .305 0,2 .008 6,35 1/4 7,75 .305 0,4 1/64

DCMT070208FP DCMT11T302FP

DCMT2152FP DCMT32505FP

6,35 1/4 7,75 .305 0,8 1/32 9,53 3/8 11,63 .458 0,2 .008

v v

DCMT11T304FP DCMT11T308FP

DCMT3251FP DCMT3252FP

9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

v v v

DCMT11T312FP DCMT150404FP

DCMT3253FP DCMT431FP

9,53 3/8 11,63 .458 1,2 3/64 12,70 1/2 15,50 .610 0,4 1/64

DCMT150408FP

DCMT432FP

12,70 1/2 15,50 .610 0,8 1/32

v v v

v v

v v v

v v

DCMT-FW D ISO catalog number DCMT11T304FW DCMT11T308FW

B96

ANSI catalog number DCMT3251FW DCMT3252FW

L10

Rε

mm in mm in mm in 9,53 3/8 11,63 .458 0,2 .007 9,53 3/8 11,63 .458 0,8 1/32

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DCMT-LF

ISO catalog number DCMT070202LF DCMT070204LF

ANSI catalog number DCMT21505LF DCMT2151LF

mm in mm in mm in 6,35 1/4 7,75 .305 0,2 .008 6,35 1/4 7,75 .305 0,4 1/64

DCMT11T302LF DCMT11T304LF

DCMT32505LF DCMT3251LF

9,53 3/8 11,63 .458 0,2 .008 9,53 3/8 11,63 .458 0,4 1/64

v v v v

v v v v v v

v v

DCMT11T308LF DCMT11T312LF

DCMT3252LF DCMT3253LF

9,53 3/8 11,63 .458 0,8 1/32 9,53 3/8 11,63 .458 1,2 3/64

v v v v

v v v v v v

DCMT150404LF DCMT150408LF

DCMT431LF DCMT432LF

12,70 1/2 15,50 .610 0,4 1/64 12,70 1/2 15,50 .610 0,8 1/32

v v

v v v v

v v

v v v v

v v

DCMT-MF D

L10

Rε

ISO catalog number DCMT11T304MF DCMT11T308MF

ANSI catalog number DCMT3251MF DCMT3252MF

mm in mm in mm in 9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

v v v v v v

v v v v v

DCMT11T312MF

DCMT3253MF

9,53 3/8 11,63 .458 1,2 3/64

v v

v v v v

DCMT-MP D

L10

Rε

ISO catalog number DCMT11T304MP DCMT11T308MP

ANSI catalog number DCMT3251MP DCMT3252MP

mm in mm in mm in 9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

v v

v v v

DCMT11T312MP

DCMT3253MP

9,53 3/8 11,63 .458 1,2 3/64

v v

DCMT-MW D ISO catalog number DCMT11T304MW DCMT11T308MW

ANSI catalog number DCMT3251MW DCMT3252MW

Rε

mm in mm in mm in 9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

C2–C70

www.kennametal.com

L10

C72–C118

C119–C129

v v

C130–C161

B10–B23

B24–B31

B32–B37

B97

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number DCMT070204UF DCMT11T302UF

ANSI catalog number DCMT2151UF DCMT32505UF

mm in mm in mm in 6,35 1/4 7,75 .305 0,4 1/64 9,53 3/8 11,63 .458 0,2 .008

DCMT11T304UF DCMT11T308UF

DCMT3251UF DCMT3252UF

9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DCMT-UF

v v v

DPGT-HP D

L10

Rε

ISO catalog number DPGT070202HP DPGT070204HP

ANSI catalog number DPGT21505HP DPGT2151HP

mm in mm in mm in 6,35 1/4 7,75 .305 0,2 .008 6,35 1/4 7,75 .305 0,4 1/64

DPGT070208HP DPGT11T304HP

DPGT2152HP DPGT3251HP

6,35 1/4 7,75 .305 0,8 1/32 9,53 3/8 11,63 .458 0,4 1/64

DPGT11T308HP

DPGT3252HP

9,53 3/8 11,63 .458 0,8 1/32

v v

v v v

DPGT-LF D

L10

Rε

ISO catalog number DPGT070201LF DPGT070202LF

ANSI catalog number DPGT2150LF DPGT21505LF

mm in mm in mm in 6,35 1/4 7,75 .305 0,1 .004 6,35 1/4 7,75 .305 0,2 .008

DPGT070204LF DPGT11T301LF

DPGT2151LF DPGT3250LF

6,35 1/4 7,75 .305 0,4 1/64 9,53 3/8 11,63 .458 0,1 .004

v v

DPGT11T302LF DPGT11T304LF

DPGT32505LF DPGT3251LF

9,53 3/8 11,63 .458 0,2 .008 9,53 3/8 11,63 .458 0,4 1/64

v v

DPGT11T308LF

DPGT3252LF

9,53 3/8 11,63 .458 0,8 1/32

v v

DPMT-FP D

L10

Rε

ISO catalog number DPMT070202FP DPMT070204FP

ANSI catalog number DPMT21505FP DPMT2151FP

mm in mm in mm in 6,35 1/4 7,75 .305 0,2 .008 6,35 1/4 7,75 .305 0,4 1/64

DPMT070208FP DPMT11T302FP

DPMT2152FP DPMT32505FP

6,35 1/4 7,75 .305 0,8 1/32 9,53 3/8 11,63 .458 0,2 .008

DPMT11T304FP DPMT11T308FP

DPMT3251FP DPMT3252FP

9,53 3/8 11,63 .458 0,4 1/64 9,53 3/8 11,63 .458 0,8 1/32

B98

v v

v v v v

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number DPMT070204FW DPMT070208FW

ANSI catalog number DPMT2151FW DPMT2152FW

mm in mm in mm in 6,35 1/4 7,75 .305 0,4 1/64 6,35 1/4 7,75 .305 0,8 1/32

DPMT11T304FW DPMT11T308FW

DPMT3251FW DPMT3252FW

9,53 3/8 11,63 .458 0,2 .007 9,53 3/8 11,63 .458 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DPMT-FW

v v

DPMT-LF D

L10

Rε

ISO catalog number DPMT070202LF DPMT070204LF

ANSI catalog number DPMT21505LF DPMT2151LF

mm in mm in mm in 6,35 1/4 7,75 .305 0,2 .008 6,35 1/4 7,75 .305 0,4 1/64

DPMT11T302LF DPMT11T304LF

DPMT32505LF DPMT3251LF

9,53 3/8 11,63 .458 0,2 .008 9,53 3/8 11,63 .458 0,4 1/64

v v v v

v v v

DPMT11T308LF

DPMT3252LF

9,53 3/8 11,63 .458 0,8 1/32

v v v v

v v v

v v v v

v v v

DPMT-MF D ISO catalog number DPMT11T308MF

ANSI catalog number DPMT3252MF

L10

Rε

mm in mm in mm in 9,53 3/8 11,63 .458 0,8 1/32

v v

v v v v v

DPMT-MP D ISO catalog number DPMT11T308MP

ANSI catalog number DPMT3252MP

Rε

mm in mm in mm in 9,53 3/8 11,63 .458 0,8 1/32

C2–C70

www.kennametal.com

L10

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B99

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

Rε

L10

ISO catalog number DPMT070204UF DPMT11T304UF

ANSI catalog number DPMT2151UF DPMT3251UF

mm in mm in mm in 6,35 1/4 7,75 .305 0,4 1/64 9,53 3/8 11,63 .458 0,4 1/64

DPMT11T308UF

DPMT3252UF

9,53 3/8 11,63 .458 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

DPMT-UF

v v

GPCD D ISO catalog number GPCD050102 GPCD050104

ANSI catalog number GPCD505 GPCD51

Rε

L10

mm in mm in mm in 3,97 5/32 5,61 .221 0,2 .007 3,97 5/32 5,61 .221 0,4 .015

v v v v

RCGH D ISO catalog number RCGH120400

ANSI catalog number RCGH43

Rε

L10

mm in mm 12,70 1/2 —

in —

mm —

in —

RCGH-MP D ISO catalog number RCGH09T300MP RCGH120400MP

ANSI catalog number RCGH325MP RCGH43MP

Rε

L10

mm in mm 9,53 3/8 — 12,70 1/2 —

in — —

mm — —

in — —

v v

RCGT-HP D

Rε

L10

ISO catalog number RCGT0803M0HP RCGT10T3M0HP

ANSI catalog number RCGT0803M0HP RCGT10T3M0HP

mm in mm 8,00 .315 — 10,00 .394 —

in — —

mm — —

in — —

v v

RCGT1204M0HP

12,00 .472

—

v v

B100

—

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

Rε

L10

ISO catalog number RCGT0803M0MS RCGT1204M0MS

ANSI catalog number RCGT0803M0MS RCGT1204M0MS

mm in mm 8,00 .315 — 12,00 .472 —

in — —

mm — —

in — —

RCGT1606M0MS RCGX1003M0MS

16,00 .630 10,00 .394

— —

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

RCGT-MS

v v

RCGT-RP D

Rε

L10

ISO catalog number RCGT0803M0RP RCGT1204M0RP

ANSI catalog number RCGT0803M0RP RCGT1204M0RP

mm in mm in mm in 8,00 .3150 — — — — 12,00 .4724 — — — —

RCGX1003M0RP RCMT1204M0RP

10,00 .3937 12,00 .4724

— —

RCMT1606M0RP RCMT2006M0RP

16,00 .6299 20,00 .7874

— —

RCMX1003M0RP RCMX2507M0RP

10,00 .3937 25,00 .9844

— —

RCMX3209M0RP

32,00 1.2598 —

—

v v v v v v

v v

— —

v v

— —

v v v

—

v v

RCMT D ISO catalog number RCMT0602M0 RCMT0803M0

ANSI catalog number RCMT0602M0 RCMT0803M0

RCMT10T3M0 RCMT1204M0

Rε

L10

mm in mm 6,00 .236 — 8,00 .315 —

in — —

mm — —

in — —

RCMT10T3M0 RCMT1204M0

10,00 .394 12,00 .472

— —

v v

RCMT1605M0 RCMT2006M0

16,00 .630 20,00 .787

— —

v v

RCMT060200 RCMT09T300

RCMT215 RCMT325

6,35 1/4 9,53 3/8

— —

RCMT120400

RCMT43

12,70 1/2

—

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

v v v

v v

B24–B31

B32–B37

B101

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

Rε

L10

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

RCMT-MP ISO catalog number RCMT0602M0MP RCMT0803M0MP

ANSI catalog number RCMT0602M0MP RCMT0803M0MP

mm in mm 6,00 .236 — 8,00 .315 —

in — —

mm — —

in — —

RCMT10T3M0MP RCMT1204M0MP

10,00 .394 12,00 .472

— —

RCMT1606M0MP RCMT060200MP

RCMT1606M0MP RCMT215MP

16,00 .630 6,35 1/4

— —

RCMT120400MP

RCMT43MP

12,70 1/2

—

v v

RPGT-MP D ISO catalog number RPGT060400MP RPGT090700MP

ANSI catalog number RPGT23MP RPGT35MP

RPGT120700MP

RPGT45MP

Rε

L10

mm in mm 6,35 1/4 — 9,53 3/8 —

in — —

mm — —

in — —

12,70 1/2

—

RCMT-RH D

Rε

L10

ISO catalog number RCMT2006M0RH RCMX2507M0RH

ANSI catalog number RCMT2006M0RH RCMX2507M0RH

mm in mm in mm in 20,00 .7874 — — — — 25,00 .9844 — — — —

v v

RCMX3209M0RH

32,00 1.2598 —

—

v v

in —

v v

v v v

—

v v

RCMT-RM D ISO catalog number RCMT2006M0RM

ANSI catalog number RCMT2006M0RM

Rε

L10

mm in mm 20,00 .787 —

in —

mm —

RCMT-RP D

Rε

L10

ISO catalog number RCGT0803M0RP RCMT1204M0RP

ANSI catalog number RCGT0803M0RP RCMT1204M0RP

mm in mm in mm in 8,00 .3150 — — — — 12,00 .4724 — — — —

RCMT1606M0RP RCMT2006M0RP

16,00 .6299 20,00 .7874

— —

v v

RCMX1003M0RP RCMX2507M0RP

10,00 .3937 25,00 .9844

— —

v v v

RCMX3209M0RP

32,00 1.2598 —

—

B102

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number SCMT09T30411 SCMT09T30811

ANSI catalog number SCMT325111 SCMT325211

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

SCMT12040411 SCMT12040811

SCMT43111 SCMT43211

12,70 1/2 12,70 .500 0,4 1/64 12,70 1/2 12,70 .500 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SCMT-11

v v v v

SCMT-FP D

L10

Rε

ISO catalog number SCMT09T304FP SCMT09T308FP

ANSI catalog number SCMT3251FP SCMT3252FP

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

SCMT120404FP SCMT120408FP

SCMT431FP SCMT432FP

12,70 1/2 12,70 .500 0,4 1/64 12,70 1/2 12,70 .500 0,8 1/32

v v

SCMT120412FP

SCMT433FP

12,70 1/2 12,70 .500 1,2 3/64

v v

v v v

v v

v v v

SCMT-LF D

L10

Rε

ISO catalog number SCMT09T304LF SCMT09T308LF

ANSI catalog number SCMT3251LF SCMT3252LF

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

SCMT120404LF SCMT120408LF

SCMT431LF SCMT432LF

12,70 1/2 12,70 .500 0,4 1/64 12,70 1/2 12,70 .500 0,8 1/32

v v v

v v v v v v

SCMT120412LF

SCMT433LF

12,70 1/2 12,70 .500 1,2 3/64

v v

v v v v

v v v

v v v v

v v v v v

v v v

SCMT-MF D

L10

Rε

ISO catalog number SCMT09T308MF SCMT120408MF

ANSI catalog number SCMT3252MF SCMT432MF

mm in mm in mm in 9,53 3/8 9,53 .375 0,8 1/32 12,70 1/2 12,70 .500 0,8 1/32

v v v v v

SCMT120412MF

SCMT433MF

12,70 1/2 12,70 .500 1,2 3/64

v v

C2–C70

www.kennametal.com

C72–C118

C119–C129

v v v v v

C130–C161

B10–B23

B24–B31

B32–B37

B103

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number SCMT09T304MP SCMT09T308MP

ANSI catalog number SCMT3251MP SCMT3252MP

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

SCMT120404MP SCMT120408MP

SCMT431MP SCMT432MP

12,70 1/2 12,70 .500 0,4 1/64 12,70 1/2 12,70 .500 0,8 1/32

SCMT120412MP

SCMT433MP

12,70 1/2 12,70 .500 1,2 3/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SCMT-MP

v v v

v v

v v v

v v

v v v

v v

v v v

SCMT-UF D ISO catalog number SCMT09T308UF

ANSI catalog number SCMT3252UF

L10

Rε

mm in mm in mm in 9,53 3/8 9,53 .375 0,8 1/32

v v

SCMW D

L10

Rε

ISO catalog number SCMW09T304 SCMW09T308

ANSI catalog number SCMW3251 SCMW3252

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

SCMW120408 SCMW120412

SCMW432 SCMW433

12,70 1/2 12,70 .500 0,8 1/32 12,70 1/2 12,70 .500 1,2 3/64

v v v v

SPGH D ISO catalog number SPGH070208 SPGH090308

B104

ANSI catalog number SPGH25152 SPGH322

L10

Rε

mm in mm in mm in 7,94 5/16 7,00 .276 0,8 1/32 9,53 3/8 9,53 .375 0,8 1/32

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number SPGT09T304LF SPGT09T308LF

ANSI catalog number SPGT3251LF SPGT3252LF

L10

Rε

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SPGT-LF

v v

SPMT-FP D ISO catalog number SPMT09T304FP SPMT09T308FP

ANSI catalog number SPMT3251FP SPMT3252FP

L10

Rε

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

v v

v v v

v v

SPMT-LF D ISO catalog number SPMT09T304LF SPMT09T308LF

ANSI catalog number SPMT3251LF SPMT3252LF

L10

Rε

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64 9,53 3/8 9,53 .375 0,8 1/32

v v

v v v

SPMT-MF D ISO catalog number SPMT09T308MF SPMT120408MF

ANSI catalog number SPMT3252MF SPMT432MF

Rε

mm in mm in mm in 9,53 3/8 9,53 .375 0,8 1/32 12,70 1/2 12,70 .500 0,8 1/32

C2–C70

www.kennametal.com

L10

C72–C118

v v

v v v v

v v v

v v v v

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B105

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number SPMT09T308MP SPMT120408MP

ANSI catalog number SPMT3252MP SPMT432MP

L10

Rε

mm in mm in mm in 9,53 3/8 9,53 .375 0,8 1/32 12,70 1/2 12,70 .500 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

SPMT-MP

v v

SPMT-UF D ISO catalog number SPMT09T304UF

ANSI catalog number SPMT3251UF

L10

Rε

mm in mm in mm in 9,53 3/8 9,53 .375 0,4 1/64

TCGT-HP D

L10

Rε

ISO catalog number TCGT110202HP TCGT110204HP

ANSI catalog number TCGT21505HP TCGT2151HP

mm in mm in mm in 6,35 1/4 11,00 .433 0,2 .008 6,35 1/4 11,00 .433 0,4 1/64

TCGT110208HP TCGT16T302HP

TCGT2152HP TCGT32505HP

6,35 1/4 11,00 .433 0,8 1/32 9,53 3/8 16,50 .650 0,2 .008

TCGT16T304HP TCGT16T308HP

TCGT3251HP TCGT3252HP

9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

v v

TCGT-LF D

L10

Rε

ISO catalog number TCGT1102X0LF TCGT110201LF

ANSI catalog number TCGT215X0LF TCGT2150LF

mm in mm in mm in 6,35 1/4 11,00 .433 0,0 .0015 6,35 1/4 11,00 .433 0,1 .004

TCGT110204LF TCGT16T301LF

TCGT2151LF TCGT3250LF

6,35 1/4 11,00 .433 0,4 1/64 9,53 3/8 16,50 .650 0,1 .004

v v

TCGT16T302LF TCGT16T304LF

TCGT32505LF TCGT3251LF

9,53 3/8 16,50 .650 0,2 .008 9,53 3/8 16,50 .650 0,4 1/64

v v

TCGT16T308LF

TCGT3252LF

9,53 3/8 16,50 .650 0,8 1/32

v v

B106

v v v

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number TCMT11020411 TCMT16T30411

ANSI catalog number TCMT215111 TCMT325111

mm in mm in mm in 6,35 1/4 11,00 .433 0,4 1/64 9,53 3/8 16,50 .650 0,4 1/64

TCMT16T30811

TCMT325211

9,53 3/8 16,50 .650 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TCMT-11

v v v

TCMT-FP D

L10

Rε

ISO catalog number TCMT090204FP TCMT090208FP

ANSI catalog number TCMT18151FP TCMT18152FP

mm in mm in mm in 5,56 7/32 9,63 .379 0,4 1/64 5,56 7/32 9,63 .379 0,8 1/32

TCMT110202FP TCMT110204FP

TCMT21505FP TCMT2151FP

6,35 1/4 11,00 .433 0,2 .008 6,35 1/4 11,00 .433 0,4 1/64

TCMT110208FP TCMT110304FP

TCMT2152FP TCMT221FP

6,35 1/4 11,00 .433 0,8 1/32 6,35 1/4 11,00 .433 0,4 1/64

TCMT110308FP TCMT110312FP

TCMT222FP TCMT223FP

6,35 1/4 11,00 .433 0,8 1/32 6,35 1/4 11,00 .433 1,2 3/64

TCMT16T302FP TCMT16T304FP

TCMT32505FP TCMT3251FP

9,53 3/8 16,50 .650 0,2 .008 9,53 3/8 16,50 .650 0,4 1/64

TCMT16T308FP TCMT16T312FP

TCMT3252FP TCMT3253FP

TCMT220408FP

TCMT432FP

v v v v

v v v

v v

v v v

9,53 3/8 16,50 .650 0,8 1/32 9,53 3/8 16,50 .650 1,2 3/64

v v

v v v

12,70 1/2 22,00 .866 0,8 1/32

v v v

v v

TCMT-LF D

L10

Rε

ISO catalog number TCMT110202LF TCMT110204LF

ANSI catalog number TCMT21505LF TCMT2151LF

mm in mm in mm in 6,35 1/4 11,00 .433 0,2 .008 6,35 1/4 11,00 .433 0,4 1/64

TCMT110208LF TCMT16T302LF

TCMT2152LF TCMT32505LF

TCMT16T304LF TCMT16T308LF TCMT16T312LF TCMT220408LF

v v v v v v

6,35 1/4 11,00 .433 0,8 1/32 9,53 3/8 16,50 .650 0,2 .008

v v v v

v v v v v

TCMT3251LF TCMT3252LF

9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

v v v v v v v v

TCMT3253LF TCMT432LF

9,53 3/8 16,50 .650 1,2 3/64 12,70 1/2 22,00 .866 0,8 1/32

C2–C70

www.kennametal.com

v v v v v

C72–C118

v v v

C119–C129

v v v v

C130–C161

B10–B23

B24–B31

B32–B37

B107

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number TCMT110208MF TCMT16T308MF

ANSI catalog number TCMT2152MF TCMT3252MF

mm in mm in mm in 6,35 1/4 11,00 .433 0,8 1/32 9,53 3/8 16,50 .650 0,8 1/32

TCMT16T312MF

TCMT3253MF

9,53 3/8 16,50 .650 1,2 3/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TCMT-MF

v v

v v v v

v v v

v v v v v

v v

v v v

v v

v v v

v v

TCMT-MP D

L10

Rε

ISO catalog number TCMT110208MP TCMT16T304MP

ANSI catalog number TCMT2152MP TCMT3251MP

mm in mm in mm in 6,35 1/4 11,00 .433 0,8 1/32 9,53 3/8 16,50 .650 0,4 1/64

TCMT16T308MP TCMT16T312MP

TCMT3252MP TCMT3253MP

9,53 3/8 16,50 .650 0,8 1/32 9,53 3/8 16,50 .650 1,2 3/64

TCMT-UF D

L10

Rε

ISO catalog number TCMT110204UF TCMT110208UF

ANSI catalog number TCMT2151UF TCMT2152UF

mm in mm in mm in 6,35 1/4 11,00 .433 0,4 1/64 6,35 1/4 11,00 .433 0,8 1/32

v v v v

TCMT16T308UF

TCMT3252UF

9,53 3/8 16,50 .650 0,8 1/32

v v

TCMW D ISO catalog number TCMW16T304 TCMW16T308

B108

ANSI catalog number TCMW3251 TCMW3252

L10

Rε

mm in mm in mm in 9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

Rε

L10

ISO catalog number TPCB160302 TPCB160304

ANSI catalog number TD6P05 TD6P1

mm in mm in mm in 9,53 3/8 16,50 .650 0,2 .007 9,53 3/8 16,50 .650 0,4 1/64

TPCB160308 TD6P

TD6P2 TD6P

9,53 3/8 16,50 .650 0,8 .031 9,53 3/8 16,50 .650 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TPCB

v v

TDHB D

Rε

L10

ISO catalog number TDHB07T12S0 TDHB07T1202

ANSI catalog number TDHB12807501 TDHB12807505

mm in mm in mm in 4,06 .160 7,04 .277 0,1 .002 4,06 .160 7,04 .277 0,2 .007

TDHB07T1204 TDHB07T1208

TDHB1280751 TDHB1280752

4,06 .160 7,04 .277 0,4 1/64 4,06 .160 7,04 .277 0,8 1/32

TDHH D ISO catalog number TDHH07T1202R

ANSI catalog number right hand TDHH12807505R

Rε

L10 in

4,06 .160 7,04 .277 0,2 .007

v v

TDHH07T1204R

TDHH1280751R left hand

4,06 .160 7,04 .277 0,4 1/64

v v

TDHH07T1202L TDHH07T1204L

TDHH12807505L TDHH1280751L

4,06 .160 7,04 .277 0,2 .007 4,06 .160 7,04 .277 0,4 1/64

v v

NOTE: Right-hand insert used left-hand bars. Left-hand insert used right-hand bars.

TPCG D ISO catalog number TPCG110202L TPCG110204L

ANSI catalog number TPCG2205L TPCG221L

TPCG110208L

TPCG222L

Rε

mm in mm in mm in 6,35 1/4 11,00 .433 0,2 .007 6,35 1/4 11,00 .433 0,4 .15

6,35 1/4 11,00 .433 0,8

C2–C70

www.kennametal.com

L10

C72–C118

.31

C119–C129

C130–C161

B10–B23

B24–B31

v v

B32–B37

B109

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number TPCH110202 TPCH110204

ANSI catalog number TPCH2205 TPCH221

L10

Rε

mm in mm in mm in 6,50 .256 11,26 .443 0,2 .007 6,50 .256 11,26 .443 0,4 .015

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TPCH

v v

TPGH D ISO catalog number TPGH160304 TPGH160308

ANSI catalog number TPGH321 TPGH322

L10

Rε

mm in mm in mm in 9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

v v

TPGM D

L10

Rε

ISO catalog number TPGT110204K TPGT110208K

ANSI catalog number TPGM2151 TPGM2152

mm in mm in mm in 6,35 1/4 11,00 .433 0,4 1/64 6,35 1/4 11,00 .433 0,8 1/32

TPGH16T304

TPGM3251

9,53 3/8 16,50 .650 0,4 1/64

v v v v v v

TPGT-HP D

L10

Rε

ISO catalog number TPGT110202HP TPGT110204HP

ANSI catalog number TPGT21505HP TPGT2151HP

mm in mm in mm in 6,35 1/4 11,00 .433 0,2 .008 6,35 1/4 11,00 .433 0,4 1/64

TPGT110208HP TPGT16T302HP

TPGT2152HP TPGT32505HP

6,35 1/4 11,00 .433 0,8 1/32 9,53 3/8 16,50 .650 0,2 .008

TPGT16T304HP TPGT16T308HP

TPGT3251HP TPGT3252HP

9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

B110

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number TPGT090202LF TPGT090204LF

ANSI catalog number TPGT181505LF TPGT18151LF

mm in mm in mm in 5,56 7/32 9,63 .379 0,2 .008 5,56 7/32 9,63 .379 0,4 1/64

TPGT110201LF TPGT110202LF

TPGT2150LF TPGT21505LF

TPGT110204LF TPGT110208LF TPGT16T304LF TPGT16T308LF

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TPGT-LF

v v

6,35 1/4 11,00 .433 0,1 .004 6,35 1/4 11,00 .433 0,2 .008

v v

TPGT2151LF TPGT2152LF

6,35 1/4 11,00 .433 0,4 1/64 6,35 1/4 11,00 .433 0,8 1/32

v v

TPGT3251LF TPGT3252LF

9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

v v

TPHB D ISO catalog number TPHB110202 TPHB160304

ANSI catalog number TPHB21505 TPHB321

L10

Rε

mm in mm in mm in 6,35 1/4 11,00 .433 0,2 .007 9,53 3/8 16,50 .650 0,4 .015

v v

TPMT-FP D

L10

Rε

ISO catalog number TPMT090204FP TPMT090208FP

ANSI catalog number TPMT18151FP TPMT18152FP

mm in mm in mm in 5,56 7/32 9,63 .379 0,4 1/64 5,56 7/32 9,63 .379 0,8 1/32

TPMT110202FP TPMT110204FP

TPMT21505FP TPMT2151FP

6,35 1/4 11,00 .433 0,2 .008 6,35 1/4 11,00 .433 0,4 1/64

TPMT110208FP TPMT110304FP

TPMT2152FP TPMT221FP

6,35 1/4 11,00 .433 0,8 1/32 6,35 1/4 11,00 .433 0,4 1/64

TPMT110308FP TPMT16T304FP

TPMT222FP TPMT3251FP

6,35 1/4 11,00 .433 0,8 1/32 9,53 3/8 16,50 .650 0,4 1/64

TPMT16T308FP TPMT16T312FP

TPMT3252FP TPMT3253FP

TPMT220408FP

TPMT432FP

v v

v v v

v v

v v v

v v

v v v

9,53 3/8 16,50 .650 0,8 1/32 9,53 3/8 16,50 .650 1,2 3/64

v v v

12,70 1/2 22,00 .866 0,8 1/32

C2–C70

www.kennametal.com

v v v

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B111

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number TPMT090202LF TPMT090204LF

ANSI catalog number TPMT181505LF TPMT18151LF

TPMT110202LF TPMT110204LF

TPMT21505LF TPMT2151LF

1/4 1/4

6,350 11,00 .433 0,2 .008 6,350 11,00 .433 0,4 1/64

TPMT110208LF TPMT16T304LF

TPMT2152LF TPMT3251LF

1/4 3/8

TPMT16T308LF TPMT16T312LF

TPMT3252LF TPMT3253LF

3/8 3/8

TPMT220408LF

TPMT432LF

1/2 12,700 22,00 .866 0,8 1/32

in mm mm in mm in 7/32 5,560 9,63 .379 0,2 .008 7/32 5,560 9,63 .379 0,4 1/64

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

TPMT-LF

v v v

v v

v v v

v v v v v

6,350 11,00 .433 0,8 1/32 9,525 16,50 .650 0,4 1/64

v v v

v v v v v

v v

9,525 16,50 .650 0,8 1/32 9,525 16,50 .650 1,2 3/64

v v v

v v

v v v v v

v v v v v v

v v

TPMT-MF D

L10

Rε

ISO catalog number TPMT110208MF TPMT16T308MF

ANSI catalog number TPMT2152MF TPMT3252MF

mm in mm in mm in 6,35 1/4 11,00 .433 0,8 1/32 9,53 3/8 16,50 .650 0,8 1/32

v v

v v v

v v v v

TPMT16T312MF

TPMT3253MF

9,53 3/8 16,50 .650 1,2 3/64

v v

TPMT-MP D

L10

Rε

ISO catalog number TPMT110208MP TPMT16T308MP

ANSI catalog number TPMT2152MP TPMT3252MP

mm in mm in mm in 6,35 1/4 11,00 .433 0,8 1/32 9,53 3/8 16,50 .650 0,8 1/32

v v

TPMT16T312MP

TPMT3253MP

9,53 3/8 16,50 .650 1,2 3/64

TPMT-UF D

L10

Rε

ISO catalog number TPMT110202UF TPMT110204UF

ANSI catalog number TPMT21505UF TPMT2151UF

mm in mm in mm in 6,35 1/4 11,00 .433 0,2 .008 6,35 1/4 11,00 .433 0,4 1/64

TPMT16T304UF TPMT16T308UF

TPMT3251UF TPMT3252UF

9,53 3/8 16,50 .650 0,4 1/64 9,53 3/8 16,50 .650 0,8 1/32

B112

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number VBGT110302HP VBGT110304HP

ANSI catalog number VBGT2205HP VBGT221HP

mm in mm in mm in 6,35 1/4 11,07 .436 0,2 .008 6,35 1/4 11,07 .436 0,4 1/64

VBGT160404HP VBGT160408HP

VBGT331HP VBGT332HP

9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

VBGT-HP

v v

VBGT-LF D

L10

Rε

ISO catalog number VBGT1103X0LF VBGT110301LF

ANSI catalog number VBGT22X0LF VBGT220LF

mm in mm in mm in 6,35 1/4 11,07 .436 0,0 .0015 6,35 1/4 11,07 .436 0,1 .004

VBGT110302LF VBGT110304LF

VBGT2205LF VBGT221LF

6,35 1/4 11,07 .436 0,2 .008 6,35 1/4 11,07 .436 0,4 1/64

VBGT1604X0LF VBGT160401LF

VBGT33X0LF VBGT330LF

9,53 3/8 16,61 .654 0,0 .0015 9,53 3/8 16,61 .654 0,1 .004

VBGT160402LF VBGT160404LF

VBGT3305LF VBGT331LF

9,53 3/8 16,61 .654 0,2 .008 9,53 3/8 16,61 .654 0,4 1/64

v v

VBMT-11 D

L10

Rε

ISO catalog number VBMT11030211 VBMT11030411

ANSI catalog number VBMT220511 VBMT22111

mm in mm in mm in 6,35 1/4 11,07 .436 0,2 .008 6,35 1/4 11,07 .436 0,4 1/64

VBMT16040411 VBMT16040811

VBMT33111 VBMT33211

9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

v v v v

C130–C161

B10–B23

B24–B31

B32–B37

B113

Inserts

P M K N S H

ISO/ANSI Carbide Inserts

Inserts

Screw-On Inserts

first choice

alternate choice

P M K N S H

v v v v v

v v

v v v

v v v v v v v v v v v v

L10

Rε

ISO catalog number VBMT110302FP VBMT110304FP

ANSI catalog number VBMT2205FP VBMT221FP

mm in mm in mm in 6,35 1/4 11,07 .436 0,2 .008 6,35 1/4 11,07 .436 0,4 1/64

VBMT110308FP VBMT160402FP

VBMT222FP VBMT3305FP

VBMT160404FP VBMT160408FP VBMT160412FP

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

VBMT-FP

v v

6,35 1/4 11,07 .436 0,8 1/32 9,53 3/8 16,61 .654 0,2 .008

v v

VBMT331FP VBMT332FP

9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

v v v

VBMT333FP

9,53 3/8 16,61 .654 1,2 3/64

VBMT-LF D

L10

Rε

ISO catalog number VBMT110302LF VBMT110304LF

ANSI catalog number VBMT2205LF VBMT221LF

mm in mm in mm in 6,35 1/4 11,07 .436 0,2 .008 6,35 1/4 11,07 .436 0,4 1/64

VBMT110308LF VBMT160402LF

VBMT222LF VBMT3305LF

VBMT160404LF VBMT160408LF VBMT160412LF

v v v v

v v v

6,35 1/4 11,07 .436 0,8 1/32 9,53 3/8 16,61 .654 0,2 .008

v v v v

v v

VBMT331LF VBMT332LF

9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

v v v v

v v v v v v

v v

v v v v

v v v v v v

v v

VBMT333LF

9,53 3/8 16,61 .654 1,2 3/64

VBMT-MP D ISO catalog number VBMT160404MP VBMT160408MP

ANSI catalog number VBMT331MP VBMT332MP

L10

Rε

mm in mm in mm in 9,53 3/8 16,61 .654 0,4 1/64 9,53 3/8 16,61 .654 0,8 1/32

WCMT-FP D ISO catalog number WCMT040204FP WCMT06T308FP

B114

ANSI catalog number WCMT2151FP WCMT3252FP

L10

Rε

mm in mm in mm in 6,35 1/4 4,34 .171 0,4 1/64 9,53 3/8 6,52 .257 0,8 1/32

v v

www.kennametal.com

ISO/ANSI Carbide Inserts Screw-On Inserts

first choice

alternate choice

v v v v v

v v

v v v

v v v v v v v v v v v v

D ISO catalog number WCMT040204LF WCMT06T308LF

ANSI catalog number WCMT2151LF WCMT3252LF

L10

Rε

mm in mm in mm in 6,35 1/4 4,34 .171 0,4 1/64 9,53 3/8 6,52 .257 0,8 1/32

KCP05 KCP10 KCP25 KCP30 KCP40 KCK05 KCK15 KCK20 KCM15 KCM25 KCM35 KU10 K313 K68 KCS10 KCU10 KC5010 KC5510 KCU25 KC5025 KC5525 KC5410 KT315 KTP10

WCMT-LF

WPMT-FP D

L10

Rε

ISO catalog number WPMTS3T104FP WPMT040204FP

ANSI catalog number WPMT15121FP WPMT2151FP

mm in mm in mm in 4,76 3/16 3,25 .128 0,4 1/64 6,35 1/4 4,34 .171 0,4 1/64

WPMT06T304FP WPMT06T308FP

WPMT3251FP WPMT3252FP

9,53 3/8 6,52 .257 0,4 1/64 9,53 3/8 6,52 .257 0,8 1/32

v v v v

v v

WPGT-UF D

L10

Rε

ISO catalog number WPGTS30101UF WPGTS30102UF

ANSI catalog number WPGT1510UF WPGT15105UF

mm in mm in mm in 4,76 3/16 3,26 .128 0,1 .004 4,76 3/16 3,26 .128 0,2 .008

v v

WPGT040202UF

WPGT21505UF

6,35 1/4 4,34 .171 0,2 .008

v v

WPMT-LF D

L10

Rε

ISO catalog number WPMTS3T104LF WPMT040204LF

ANSI catalog number WPMT15121LF WPMT2151LF

mm in mm in mm in 4,76 3/16 3,25 .128 0,4 1/64 6,35 1/4 4,34 .171 0,4 1/64

WPMT06T304LF WPMT06T308LF

WPMT3251LF WPMT3252LF

9,53 3/8 6,52 .257 0,4 1/64 9,53 3/8 6,52 .257 0,8 1/32

C2–C70

www.kennametal.com

C72–C118

v v v v

C119–C129

C130–C161

v v v

B10–B23

B24–B31

B32–B37

B115

Inserts

P M K N S H

Ceramic Inserts Primary Application Kennametal’s advanced materials, utilizing Beyond™ technology, offer greater wear resistance and toughness, depending on the job. KYK ceramic inserts are the first choice for high speed, continuous, and lightly interrupted turning applications in cast iron materials. Benefits include improved fracture toughness, better wear resistance, and extended application range. Combining KYK10™ and CVD-coated KYK25™ with our other ceramic grades for cast iron, Kennametal provides a complete, high-performance ceramic portfolio that can reduce machining cycle times and lower manufacturing costs. KYS ceramic inserts are the first choice for high-speed applications in high-temp alloys. The multilayer coating offers enhanced chemical wear resistance versus uncoated grades. A superior sialon ceramic substrate provides excellent depth of cut notching resistance versus whisker-reinforced ceramics.

Features and Benefits KYK10 • Improved wear resistance and toughness with 20% longer tool life than current KY1310™. • Best suited for continuous turning of cast iron materials and in lightly interrupted cuts. • Available in Kenloc,™ Kendex,™ and Top Notch™ turning insert styles.

KY3500™ • The industry standard for high-speed turning. • Excellent for roughing to finishing operations in wet or dry cuts with speeds up to 3,400 SFM. • Performs well in difficult interrupted cuts in ductile or malleable cast iron (<70 KSI tensile strength) at speeds of 900–1,600 SFM.

KYK25 • 12 micron thick coating provides excellent wear resistance and pre-coat treatment allows for very consistent tool life and performance in cast iron applications. • Up to 30% longer tool life vs. competitors’ CVD-coated ceramic grades. • Available in Kenloc, Kendex, and Top Notch turning insert styles.

B116

www.kennametal.com

KYS25™ • Excellent surface finish, lower cutting forces, higher speeds. • Advanced CVD coating provides excellent chemical and depth-of-cut notch resistance.

KYS30™ • Long, consistent tool life. • Excellent toughness and depth-of-cut notch resistance. • Performs in a wide variety of machining conditions, including interrupted cuts and applications involving scale.

www.kennametal.com

B117

ISO/ANSI Ceramic Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v

v v v j

Rε

L10

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

CNGA ISO catalog number CNGA120404E CNGA120408E

ANSI catalog number CNGA431 CNGA432E

mm 12,70 12,70

in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

CNGA120408T01020 CNGA120408T02020

CNGA432T0420 CNGA432T0820

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

0,8 0,8

1/32 1/32

CNGA120412E CNGA120412E

CNGA433 CNGA433E

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,2 1,2

3/64 3/64

CNGA120412T01020 CNGA120412T02020

CNGA433T0420 CNGA433T0820

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,2 1,2

3/64 3/64

v v

CNGA120416E CNGA120416T01020

CNGA434E CNGA434T0420

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,6 1,6

1/16 1/16

v v

CNGA120416T02020 CNGA160612T01020

CNGA434T0820 CNGA543T0420

12,70 15,88

1/2 5/8

12,90 16,12

.508 .635

1,6 1,2

1/16 3/64

v v v

CNGA160612T02020 CNGA160616T02020

CNGA543T0820 CNGA544T0820

15,88 15,88

5/8 5/8

16,12 16,12

.635 .635

1,2 1,6

3/64 1/16

v v

CNGA190612T01020 CNGA190612T02020

CNGA643T0420 CNGA643T0820

19,05 19,05

3/4 3/4

19,34 19,34

.762 .762

1,2 1,2

3/64 3/64

CNGA190616T01020 CNGA190616T02020

CNGA644T0420 CNGA644T0820

19,05 19,05

3/4 3/4

19,34 19,34

.762 .762

1,6 1,6

1/16 1/16

v v v v v v v v v v v v v v v v

v v v v v

CNGA-FW D

B118

Rε

L10

ISO catalog number CNGA120404EFW CNGA120408EFW

ANSI catalog number CNGA431FW CNGA432FW

mm 12,70 12,70

in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

CNGA120408T01020FW CNGA120412EFW

CNGA432T0420FW CNGA433FW

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

0,8 1,2

1/32 3/64

v v

CNGA120412T01020FW CNGA120412T02020FW

CNGA433T0420FW CNGA433T0820FW

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,2 1,2

3/64 3/64

v v v

CNGA120416T01020FW

CNGA434T0420FW

12,70

1/2

12,90

.508

1,6

1/16

v v

www.kennametal.com

ISO/ANSI Ceramic Inserts

first choice

alternate choice

P M K N S H

Inserts

Kenloc™ Inserts

v v v

v v v j

Rε

L10

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

DNGA ISO catalog number DNGA150404E DNGA150404T01020

ANSI catalog number DNGA431 DNGA431T0420

mm 12,70 12,70

in 1/2 1/2

mm 15,50 15,50

in .610 .610

mm 0,4 0,4

in 1/64 1/64

DNGA150408E DNGA150408T01020

DNGA432 DNGA432T0420

12,70 12,70

1/2 1/2

15,50 15,50

.610 .610

0,8 0,8

1/32 1/32

v v v

DNGA150408T02020 DNGA150412T01020

DNGA432T0820 DNGA433T0420

12,70 12,70

1/2 1/2

15,50 15,50

.610 .610

0,8 1,2

1/32 3/64

v v

DNGA150412T02020 DNGA150416T01020

DNGA433T0820 DNGA434T0420

12,70 12,70

1/2 1/2

15,50 15,50

.610 .610

1,2 1,6

3/64 1/16

v v v

DNGA150416T02020 DNGA150424T01020

DNGA434T0820 DNGA436T0420

12,70 12,70

1/2 1/2

15,50 15,50

.610 .610

1,6 2,4

1/16 3/32

v v v

DNGA150608T01020 DNGA150608T02020

DNGA442T0420 DNGA442T0820

12,70 12,70

1/2 1/2

15,50 15,50

.610 .610

0,8 0,8

1/32 1/32

DNGA150612T01020 DNGA150612T02020

DNGA443T0420 DNGA443T0820

12,70 12,70

1/2 1/2

15,50 15,50

.610 .610

1,2 1,2

3/64 3/64

DNGA150616T01020 DNGA150616T02020

DNGA444T0420 DNGA444T0820

12,70 12,70

1/2 1/2

15,50 15,50

.610 .610

1,6 1,6

1/16 1/16

v v v v v v v v

v v

DNGA-FW D ISO catalog number DNGA150408EFW DNGA150412EFW

ANSI catalog number DNGA432FW DNGA433FW

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 15,50 15,50

in .610 .610

mm 0,8 1,2

in 1/32 3/64

v v

RNGA D ISO catalog number RNGA120400T01525

ANSI catalog number RNGA43T0625

C2–C70

www.kennametal.com

C72–C118

mm 12,70

C119–C129

Rε

L10 in 1/2

mm —

C130–C161

in —

mm —

B10–B23

in —

B24–B31

B32–B37

B119

ISO/ANSI Ceramic Inserts

Inserts

Kenloc™ Inserts

first choice

alternate choice

P M K N S H

v v v

v v v j

Rε

L10

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

SNGA ISO catalog number SNGA120408T01020 SNGA120408T02020

ANSI catalog number SNGA432T0420 SNGA432T0820

mm 12,70 12,70

in 1/2 1/2

mm 12,70 12,70

in .500 .500

mm 0,8 0,8

in 1/32 1/32

SNGA120412T01020 SNGA120412T02020

SNGA433T0420 SNGA433T0820

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

1,2 1,2

3/64 3/64

SNGA120416T01020 SNGA120416T02020

SNGA434T0420 SNGA434T0820

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

1,6 1,6

1/16 1/16

v v

SNGA150612T02020 SNGA150612T02020

SNGA543T SNGA543T0820

15,88 15,88

5/8 5/8

15,88 15,88

.625 .625

1,2 1,2

3/64 3/64

SNGA150616T02020 SNGA190612T02020

SNGA544T SNGA643T0820

15,88 19,05

5/8 3/4

15,88 19,05

.625 .750

1,6 1,2

1/16 3/64

SNGA190616T02020

SNGA644T0820

19,05

3/4

19,05

.750

1,6

1/16

v v v v v v

v v v v v

TNGA D

Rε

L10

ISO catalog number TNGA160404E TNGA160404T01020

ANSI catalog number TNGA331 TNGA331T0420

mm 9,53 9,53

in 3/8 3/8

mm 16,50 16,50

in .650 .650

mm 0,4 0,4

in 1/64 1/64

TNGA160408E TNGA160408T01020

TNGA332 TNGA332T0420

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

0,8 0,8

1/32 1/32

TNGA160408T02020 TNGA160412T01020

TNGA332T0820 TNGA333T0420

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

0,8 1,2

1/32 3/64

TNGA160412T02020 TNGA160416T02020

TNGA333T0820 TNGA334T0820

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

1,2 1,6

3/64 1/16

TNGA220408T01020 TNGA220412T01020

TNGA432T0420 TNGA433T0420

12,70 12,70

1/2 1/2

22,00 22,00

.866 .866

0,8 1,2

1/32 3/64

TNGA220412T02020 TNGA220416T02020

TNGA433T0820 TNGA434T

12,70 12,70

1/2 1/2

22,00 22,00

.866 .866

1,2 1,6

3/64 1/16

v v v v v

v v v v v v v v v

VNGA D

B120

Rε

L10

ISO catalog number VNGA160404T01020 VNGA160408T01020

ANSI catalog number VNGA331T0420 VNGA332T0420

mm 9,53 9,53

in 3/8 3/8

mm 16,61 16,61

in .654 .654

mm 0,4 0,8

in 1/64 1/32

VNGA160408T02020 VNGA220408T02020

VNGA332T0820 VNGA432T0820

9,53 12,70

3/8 1/2

16,61 22,14

.654 .872

0,8 0,8

1/32 1/32

v v v v

www.kennametal.com

ISO/ANSI Ceramic Inserts

first choice

alternate choice

P M K N S H

Inserts

Kenloc™ Inserts

v v v

v v v j

Rε

L10

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

WNGA ISO catalog number WNGA080404T01020 WNGA080408EFW

ANSI catalog number WNGA431T0420 WNGA432FW

mm 12,70 12,70

in 1/2 1/2

mm 8,69 8,69

in .342 .342

mm 0,4 0,8

in 1/64 1/32

WNGA080408T01020 WNGA080408T01020FW

WNGA432T0420 WNGA432T0420FW

12,70 12,70

1/2 1/2

8,69 8,69

.342 .342

0,8 0,8

1/32 1/32

WNGA080408T02020 WNGA080412EFW

WNGA432T0820 WNGA433FW

12,70 12,70

1/2 1/2

8,69 8,69

.342 .342

0,8 1,2

1/32 3/64

WNGA080412T01020 WNGA080412T01020FW

WNGA433T0420 WNGA433T0420FW

12,70 12,70

1/2 1/2

8,69 8,69

.342 .342

1,2 1,2

3/64 3/64

WNGA080412T02020 WNGA080416T01020

WNGA433T0820 WNGA434T0420

12,70 12,70

1/2 1/2

8,69 8,69

.342 .342

1,2 1,6

3/64 1/16

WNGA080416T02020

WNGA434T0820

12,70

1/2

8,69

.342

1,6

1/16

v v

v v v

v v v v v v v v v v

WNGA-FW D

Rε

L10

ISO catalog number WNGA080408EFW WNGA080408T01020FW

ANSI catalog number WNGA432FW WNGA432T0420FW

mm 12,70 12,70

in 1/2 1/2

mm 8,69 8,69

in .342 .342

mm 0,8 0,8

in 1/32 1/32

WNGA080412EFW WNGA080412T01020FW

WNGA433FW WNGA433T0420FW

12,70 12,70

1/2 1/2

8,69 8,69

.342 .342

1,2 1,2

3/64 3/64

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B121

ISO/ANSI Ceramic Inserts

Inserts

Kendex™ Negative Inserts

first choice

alternate choice

P M K N S H

v v v

v v v j

Rε

L10

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

CNG ISO catalog number CNGN120404T01020 CNGN120408T01020

ANSI catalog number CNG431T0420 CNG432T0420

mm 12,70 12,70

in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

CNGN120408T02020 CNGN120412E

CNG432T0820 CNG433E

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

0,8 1,2

1/32 3/64

CNGN120412T01020 CNGN120412T02020

CNG433T0420 CNG433T0820

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,2 1,2

3/64 3/64

v v v

CNGN120416E CNGN120416T01020

CNG434E CNG434T0420

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,6 1,6

1/16 1/16

v v

CNGN120416T02020 CNGN120708T01020

CNG434T0820 CNG452T0420

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,6 0,8

1/16 1/32

CNGN120712T01020 CNGN120712T02020

CNG453T0420 CNG453T0820

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,2 1,2

3/64 3/64

v v v

CNGN120716T01020 CNGN120716T02020

CNG454T0420 CNG454T0820

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,6 1,6

1/16 1/16

v v v

CNGN160412T02020 CNGN160716T02020

CNG533T0820 CNG554T0820

15,88 15,88

5/8 5/8

16,12 16,12

.635 .635

1,2 1,6

3/64 1/16

v v v v

v v

v v v v v v

v v v v v

v v v v v v

v v v

CNGX D

Rε

L10

ISO catalog number CNGX120708T01020 CNGX120708T02020

ANSI catalog number CNGX452T0420 CNGX452T0820

mm 12,70 12,70

in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,8 0,8

in 1/32 1/32

CNGX120712E CNGX120712T01020

CNGX453E CNGX453T0420

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,2 1,2

3/64 3/64

v v

CNGX120712T02020 CNGX120716E

CNGX453T0820 CNGX454E

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,2 1,6

3/64 1/16

CNGX120716T02020 CNGX160716T02020

CNGX454T0820 CNGX554T0820

12,70 15,88

1/2 5/8

12,90 16,12

.508 .635

1,6 1,6

1/16 1/16

v v v v v v

v v v

v v v v v v

CNGX-FW D

B122

Rε

L10

ISO catalog number CNGX120708T01020FW CNGX120712T01020FW

ANSI catalog number CNGX452T0420FW CNGX453T0420FW

mm 12,70 12,70

in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,8 1,2

in 1/32 3/64

CNGX120716T01020FW

CNGX454T0420FW

12,70

1/2

12,90

.508

1,6

1/16

www.kennametal.com

ISO/ANSI Ceramic Inserts

first choice

alternate choice

P M K N S H

Inserts

Kendex™ Negative Inserts

v v v

v v v j

Rε

L10

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

DNGN ISO catalog number DNGN150412T01020 DNGN150704T01020

ANSI catalog number DNG433T0420 DNG451T0420

mm 12,70 12,70

in 1/2 1/2

mm 15,50 15,50

in .610 .610

mm 1,2 0,4

in 3/64 1/64

DNGN150708T01020 DNGN150712T01020

DNG452T0420 DNG453T0420

12,70 12,70

1/2 1/2

15,50 15,50

.610 .610

0,8 1,2

1/32 3/64

DNGN150716T01020

DNG454T0420

12,70

1/2

15,50

.610

1,6

1/16

v v

DNGX D

Rε

L10

ISO catalog number DNGX120708T02020 DNGX120712T02020

ANSI catalog number DNGX120708T02020 DNGX120712T02020

mm 10,00 10,00

in .3937 .3937

mm 12,21 12,21

in .481 .481

mm 0,8 1,2

in 1/32 3/64

DNGX120716T02020 DNGX150708T01020

DNGX120716T02020 DNGX452T0420

10,00 12,70

.3937 1/2

12,21 15,50

.481 .610

1,6 0,8

1/16 1/32

v v

DNGX150708T02020 DNGX150712T01020

DNGX452T0420 DNGX453T0420

12,70 12,70

1/2 1/2

15,50 15,50

.610 .610

0,8 1,2

1/32 3/64

v v

DNGX150712T02020 DNGX150716T01020

DNGX453T0820 DNGX454T0420

12,70 12,70

1/2 1/2

15,50 15,50

.610 .610

1,2 1,6

3/64 1/16

v v

DNGX150716T02020

DNGX454T0820

12,70

1/2

15,50

.610

1,6

1/16

v v v v v

v v

ENG D

Rε

L10

ISO catalog number ENGN130412T02020 ENGN130708T01020

ANSI catalog number ENG433T0820 ENG452T0420

mm 12,70 12,70

in 1/2 1/2

mm 13,15 13,15

in .518 .518

mm 1,2 0,8

in 3/64 1/32

ENGN130712T01020 ENGN130712T02020

ENG453T0420 ENG453T0820

12,70 12,70

1/2 1/2

13,15 13,15

.518 .518

1,2 1,2

3/64 3/64

ENGN130716T02020

ENG454T0820

12,70

1/2

13,15

.518

1,6

1/16

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

v v v v v

B32–B37

B123

ISO/ANSI Ceramic Inserts

Inserts

Kendex™ Negative Inserts

first choice

alternate choice

P M K N S H

v v v

v v v j

D ISO catalog number ENGX130716T02020

ANSI catalog number ENGX454T0820

mm 12,70

Rε

L10 in 1/2

mm 13,15

in .518

mm 1,6

in 1/16

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

ENGX

RNGN D

B124

Rε

L10

ISO catalog number RNGN090300T01020 RNGN090400T00520

ANSI catalog number RNG32T0420 RNG33T0220

mm 9,53 9,53

in 3/8 3/8

mm — —

in — —

mm — —

in — —

RNGN120300T01020 RNGN120400E

RNG42T0420 RNG43E

12,70 12,70

1/2 1/2

— —

RNGN120400T01020 RNGN120400T02020

RNG43T0420 RNG43T0820

12,70 12,70

1/2 1/2

— —

v v v

RNGN120700E RNGN120700T00520

RNG45E RNG45T0220

12,70 12,70

1/2 1/2

— —

v v v

RNGN120700T00525 RNGN120700T01020

RNG45T0225 RNG45T0420

12,70 12,70

1/2 1/2

— —

RNGN120700T01025 RNGN120700T02020

RNG45T0425 RNG45T0820

12,70 12,70

1/2 1/2

— —

v v v

RNGN120700T10015 RNGN120700T15015

RNG45T4015 RNG45T6015

12,70 12,70

1/2 1/2

— —

RNGN150700T02020 RNGN150700T20015

RNG55T0820 RNG55T8015

15,88 15,88

5/8 5/8

— —

RNGN190700E RNGN190700T01020

RNG65E RNG65T0420

19,05 19,05

3/4 3/4

— —

RNGN190700T20015 RNGN250700T01020

RNG65T8015 RNG85T0420

19,05 25,40

3/4 1

— —

RNGN250700T20015 RNGN250900E

RNG85T8015 RNG86E

25,40 25,40

1 1

— —

v v v v v v v v v

v v v

v v v v v v v v

www.kennametal.com

ISO/ANSI Ceramic Inserts

first choice

alternate choice

P M K N S H

Inserts

Kendex™ Negative Inserts

v v v

v v v j

Rε

L10

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

SNGN ISO catalog number SNGN090308T01020 SNGN090308T02020

ANSI catalog number SNG322T0420 SNG322T0820

mm 9,53 9,53

in 3/8 3/8

mm 9,53 9,53

in .375 .375

mm 0,8 0,8

in 1/32 1/32

SNGN090312T01020 SNGN120408T01020

SNG323T0420 SNG432T0420

9,53 12,70

3/8 1/2

9,53 12,70

.375 .500

1,2 0,8

3/64 1/32

v v v

SNGN120408T02020 SNGN120412T01020

SNG432T0820 SNG433T0420

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

0,8 1,2

1/32 3/64

v v v

SNGN120412T02020 SNGN120416T01020

SNG433T0820 SNG434T0420

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

1,2 1,6

3/64 1/16

SNGN120416T02020 SNGN120424T02020

SNG434T0820 SNG436T0820

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

1,6 2,4

1/16 3/32

SNGN120432T02020 SNGN120704T01020

SNG438T0820 SNG451T0420

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

3,2 0,4

1/8 1/64

SNGN120708T01020 SNGN120712T01020

SNG452T0420 SNG453T0420

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

0,8 1,2

1/32 3/64

SNGN120712T02020 SNGN120716T01020

SNG453T0820 SNG454T0420

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

1,2 1,6

3/64 1/16

SNGN120716T02020 SNGN120720T05020

SNG454T0820 SNG455T2020

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

1,6 2,0

1/16 5/64

SNGN150712T02020 SNGN190412T02020

SNG553T0820 SNG633T0820

15,88 19,05

5/8 3/4

15,88 19,05

.625 .750

1,2 1,2

3/64 3/64

SNGN190416T02020 SNGN190616E

SNG634T0820 SNG644E

19,05 19,05

3/4 3/4

19,05 19,05

.750 .750

1,6 1,6

1/16 1/16

SNGN190616T01020 SNGN190716T20015

SNG644T0420 SNG654T8015

19,05 19,05

3/4 3/4

19,05 19,05

.750 .750

1,6 1,6

1/16 1/16

SNGN190720T10015 SNGN190724E

SNG655T4015 SNG656E

19,05 19,05

3/4 3/4

19,05 19,05

.750 .750

2,0 2,4

5/64 3/32

SNGN190724T20015

SNG656T8015

19,05

3/4

19,05

.750

2,4

3/32

v v v v v v v v v v v v v

v v v

v v

v v v v v v v v v v v v v

SNGX D

Rε

L10

ISO catalog number SNGX120708T01020 SNGX120708T02020

ANSI catalog number SNGX452T0420 SNGX452T0820

mm 12,70 12,70

in 1/2 1/2

mm 12,70 12,70

in .500 .500

mm 0,8 0,8

in 1/32 1/32

SNGX120712T01020 SNGX120712T02020

SNGX453T0420 SNGX453T0820

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

1,2 1,2

3/64 3/64

v v

SNGX120716T01020 SNGX120716T02020

SNGX454T0420 SNGX454T0820

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

1,6 1,6

1/16 1/16

v v

SNGX150712T02020 SNGX150716T02020

SNGX553T0820 SNGX554T0820

15,88 15,88

5/8 5/8

15,88 15,88

.625 .625

1,2 1,6

3/64 1/16

v v v

SNGX150724T02020

SNGX556T0820

15,88

5/8

15,88

.625

2,4

3/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

v v

v v v

B24–B31

v v v v v

B32–B37

B125

ISO/ANSI Ceramic Inserts

Inserts

Kendex™ Negative Inserts

first choice

alternate choice

P M K N S H

v v v

v v v j

D ISO catalog number SNGX120712T01020FW

ANSI catalog number SNGX453T0420FW

mm 12,70

Rε

L10 in 1/2

mm 12,70

in .500

mm 1,2

in 3/64

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

SNGX-FW

TNG D

Rε

L10

ISO catalog number TNGN110308T01020 TNGN160408T01020

ANSI catalog number TNG222T0420 TNG332T0420

mm 6,35 9,53

in 1/4 3/8

mm 11,00 16,50

in .433 .650

mm 0,8 0,8

in 1/32 1/32

TNGN160408T02020 TNGN160708T01020

TNG332T0820 TNG352T0420

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

0,8 0,8

1/32 1/32

TNGN160412T01020 TNGN160412T02020

TNG333T0420 TNG333T0820

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

1,2 1,2

3/64 3/64

TNGN160712T01020 TNGN220408T01020

TNG353T0420 TNG432T0420

9,53 12,70

3/8 1/2

16,50 22,00

.650 .866

1,2 0,8

3/64 1/32

TNGN220408T02020 TNGN220412T01020

TNG432T0820 TNG433T0420

12,70 12,70

1/2 1/2

22,00 22,00

.866 .866

0,8 1,2

1/32 3/64

TNGN220416T01020 TNGN220416T02020

TNG434T0420 TNG434T0820

12,70 12,70

1/2 1/2

22,00 22,00

.866 .866

1,6 1,6

1/16 1/16

v v

v v v v v

v v v v v v

VNGX D ISO catalog number VNGX160712T02020 VNGX160716T02020

B126

ANSI catalog number VNGX353T0820 VNGX354T0820

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 16,61 16,61

in .654 .654

mm 1,2 1,6

in 3/64 1/16

v v

www.kennametal.com

ISO/ANSI Ceramic Inserts

first choice

alternate choice

P M K N S H

Inserts

Kendex™ Negative Inserts

v v v

v v v j

Rε

L10

ISO catalog number WNGX080708T02020 WNGX080712T02020

ANSI catalog number WNGX452T0820 WNGX453T0820

mm 12,70 12,70

in 1/2 1/2

mm 8,69 8,69

in .342 .342

mm 0,8 1,2

in 1/32 3/64

WNGX080716T02020

WNGX454T0820

12,70

1/2

8,69

.342

1,6

1/16

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

WNGX

v v v v v v

WNGX-FW D

Rε

L10

ISO catalog number WNGX080708T01020FW WNGX080712T01020FW

ANSI catalog number WNGX452T0420FW WNGX453T0420FW

mm 12,70 12,70

in 1/2 1/2

mm 8,69 8,69

in .342 .342

mm 0,8 1,2

in 1/32 3/64

WNGX080716T01020FW

WNGX454T0420FW

12,70

1/2

8,69

.342

1,6

1/16

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

v v v

B32–B37

B127

ISO/ANSI Ceramic Inserts

Inserts

Kendex™ Positive Inserts

first choice

alternate choice

P M K N S H

v v v

v v v j

Rε

L10

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

RCG ISO catalog number RCGX060400E RCGX060400T01020

ANSI catalog number RCGV23E RCGV23T0420

mm 6,35 6,35

in 1/4 1/4

mm — —

in — —

mm — —

in — —

RCGX090700E RCGX090700T00525

RCGV35E RCGV35T0225

9,53 9,53

3/8 3/8

— —

v v

RCGX090700T01020 RCGX120700E

RCGV35T0420 RCGV45

9,53 12,70

3/8 1/2

— —

v v v

RCGX120700E RCGX120700S20015

RCGV45E RCGV45S8015

12,70 12,70

1/2 1/2

— —

v v

RCGX120700T01020 RCGX120700T01025

RCGV45T0420 RCGV45T0425

12,70 12,70

1/2 1/2

— —

v v v

RCGX151000T20015 RCGX191000T20015

RCGV565T8015 RCGV665T8015

15,88 19,05

5/8 3/4

— —

RCGX251200T20015

RCGV88T8015

25,40

—

in —

v v v

v v

v v v

RCGV-T D ISO catalog number RCGX060600T00520

ANSI catalog number RCGV24T0220

mm 6,35

Rε

L10 in 1/4

mm —

in —

mm —

RPGN D

B128

Rε

L10

ISO catalog number RPGN060200E RPGN090300E

ANSI catalog number RPG2150E RPG32E

mm 6,35 9,53

in 1/4 3/8

mm — —

in — —

mm — —

in — —

v v

RPGN090300T00520 RPGN090300T01020

RPG32T0220 RPG32T0420

9,53 9,53

3/8 3/8

— —

RPGN120400E RPGN120400T01020

RPG43E RPG43T0420

12,70 12,70

1/2 1/2

— —

v v

www.kennametal.com

ISO/ANSI Ceramic Inserts

first choice

alternate choice

P M K N S H

Inserts

Kendex™ Positive Inserts

v v v

v v v j

Rε

L10

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

RPGX ISO catalog number RPGX060400T00520 RPGX060400T01020

ANSI catalog number RPGV23T0220 RPGV23T0420

mm 6,35 6,35

in 1/4 1/4

mm — —

in — —

mm — —

in — —

RPGX090700E RPGX090700T00520

RPGV35E RPGV35T0220

9,53 9,53

3/8 3/8

— —

v v

RPGX090700T01020 RPGX120700E

RPGV35T0420 RPGV45E

9,53 12,70

3/8 1/2

— —

v v v

RPGX120700T00520 RPGX120700T01020

RPGV45T0220 RPGV45T0420

12,70 12,70

1/2 1/2

— —

v v

v v v v v v

SCG-FW D ISO catalog number SCGN090408EFW SCGN090408EFW

ANSI catalog number SCG332EFW SCG332FW

C2–C70

www.kennametal.com

C72–C118

mm 9,53 9,53

Rε

L10 in 3/8 3/8

C119–C129

mm 9,53 9,53

C130–C161

in .375 .375

mm 0,8 0,8

B10–B23

in 1/32 1/32

B24–B31

B32–B37

B129

ISO/ANSI Ceramic Inserts

Inserts

Kendex™ Positive Inserts

first choice

alternate choice

P M K N S H

v v v

v v v j

D ISO catalog number SPGN090308T01020 SPGN120308T01020

ANSI catalog number SPG322T0420 SPG422T0420

mm 9,53 12,70

Rε

L10 in 3/8 1/2

mm 9,53 12,70

in .375 .500

mm 0,8 0,8

in 1/32 1/32

KYS25 KYS30 KY4300 KYK10 KYK25 KY3500 KY4400

SPGN

v v

TPGN D

B130

Rε

L10

ISO catalog number TPGN110304T01020 TPGN110308T00520

ANSI catalog number TPG221T0420 TPG222T0220

mm 6,35 6,35

in 1/4 1/4

mm 11,00 11,00

in .433 .433

mm 0,4 0,8

in 1/64 1/32

TPGN110308T01020 TPGN160304T01020

TPG222T0420 TPG321T0420

6,35 9,53

1/4 3/8

11,00 16,50

.433 .650

0,8 0,4

1/32 1/64

TPGN160308T00520 TPGN160308T01020

TPG322T0220 TPG322T0420

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

0,8 0,8

1/32 1/32

TPGN160308T02020 TPGN160312T01020

TPG322T0820 TPG323T0420

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

0,8 1,2

1/32 3/64

TPGN160312T02020 TPGN220408T02020

TPG323T0820 TPG432T0820

9,53 12,70

3/8 1/2

16,50 22,00

.650 .866

1,2 0,8

3/64 1/32

TPGN220412T02020

TPG433T0820

12,70

1/2

22,00

.866

1,2

3/64

v v v v v v

www.kennametal.com

Beyond ISO Ceramic Insert Expansion ™

KYK10™, KYK25™, KYS25™, and KYS30™ The new Beyond ISO KYK Ceramic Inserts are the first choice for high speed, continuous, and lightly interrupted turning applications in grey cast iron. These premium ceramic solutions for continuous cast iron turning applications offer improved fracture toughness, better wear resistance, and extended application range. By combining KYK10 and CVD-coated KYK25 with Kennametal’s other ceramic grades for cast iron materials, Kennametal provides a complete, high-performance ceramic portfolio that can be optimised to reduce machining cycle times and lower overall manufacturing costs.

KYK10: • Best suited for continuous turning of cast iron materials and in lightly interrupted cuts.

KYK25: • Excellent wear resistance and pre-coat treatment allows for very consistent tool life and performance in a multitude of cast iron applications.

KYS25: • Excellent surface finish, lower cutting forces, higher speeds.

KYS30: • Excellent toughness and depth-of-cut notch resistance.

Experience the advantages at your Authorized Kennametal Distributor or at www.kennametal.com.

www.kennametal.com

Superhard Materials • PCBN and PCD Superhard Tool Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B132–B173 Application Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B134–B135 PCBN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B137–B163 PCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B165–B173 Superhard Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B174–B197

www.kennametal.com

B133

Superhard Tool Materials Application Areas

Properties of PCD and PCBN cutting tool materials

PCBN/PCD Inserts

The current global metalcutting climate has put increased focus on high productivity and cost reductions coming from cutting tools. These requirements lead to the rapid growth and implementation of cutting tools using superhard materials. As the name implies, these materials have a significant advantage in hardness over conventional tool materials, which from the end user point of view, translates into increased productivity (higher cutting speeds, longer tool life, etc.), lower tooling cost per part, and also, the ability to process materials previously un-machinable with conventional tooling. The most widely known superhard materials are diamond and cubic boron nitride. Our industry uses the polycrystalline forms of these materials, i.e., polycrystalline diamond (PCD) and polycrystalline boron nitride (PCBN). PCD tooling is mainly targeted at the machining of non-ferrous materials (e.g., aluminum alloys, plastics, CFRPs, composites, titanium alloys, ceramics, carbides, etc.) whereas PCBN targets iron-based alloys (e.g., cast irons, hard steels, iron-based composites, etc.) Kennametal is at the forefront of developing and implementing superhard materials in our standard and special tooling solutions across all our product lines. Kennametal's approach to superhard tooling starts with customer needs and constraints. We then use fundamental research to develop the best superhard solutions that would make available the best value for the customer and respond to their specific demands.

Where to use PCD and PCBN Diamond and cubic boron nitride (CBN) are the most commonly known superhard materials. For cutting tools, they are used in their polycrystalline form, i.e., PCD and PCBN.

MCD ideal cutting tool material

CVD diamond PCD

PCBN oxide ceramics coated carbides

hardness

cermets

micrograin carbides nitride ceramics

uncoated carbides HSS

toughness

B134

www.kennametal.com

Superhard Tool Materials Application Areas

400+

PCD

PCBN/PCD Inserts

PCBN nitride ceramics oxide ceramics cermets cemented carbides

2000 4000 6000 hardness Vickers (N/mm2)

fracture toughness, K1c (MPa/m2)

1000 2000 transverse rupture strength (MPa)

100

150

thermal conductivity (W/m*K)

Choosing between PCD and PCBN It is primarily their thermochemical stability that determines the suitability of the two materials for specific areas of application. For standard PCD, this means that it is restricted to workpiece materials where the cutting temperature does not exceed 700 ยบC and has no affinity with carbon if diffusion wear of the cutting edge is to be avoided at elevated temperatures. Operations that satisfy these conditions are, for example, the machining of non-ferrous metals, wood, plastics, and minerals where PCD mainly competes against tungsten carbide and, to some extent, high-speed steel. By contrast, PCBN is thermally stable up to approximately 1200 ยบC and has high resistance to chemical attack. As a result, extreme temperatures, such as occur when machining hard ferrous metals, do not pose difficulties and can be used to promote self-induced hot cutting. Therefore, technical and economic benefits can be achieved, particularly in comparison with grinding, and in most cases, performance is significantly better than that attainable with conventional tool materials, such as tungsten carbides and ceramics. There are limitations for PCBN, however, in the machining of austenitic steels and ferritic cast irons, where more reactive phases result in increased PCBN edge wear.

www.kennametal.com

B135

Superhard Tool Materials PCBN

PCBN

PCBN/PCD Inserts

Increased productivity can be achieved with PCBN tools through: • Higher cutting speeds. • Higher feed rates. • Longer tool life. • Less machine downtime. • More parts per machine means direct tool costs can be reduced. • Very tight workpiece surface finish tolerances can be achieved on difficult-to-machine materials. • PCBN can be used to machine ferrous materials in the hardened condition as an alternative to grinding, making it possible to substantially reduce component machining times. • PCBN offers environmental benefits — the generation of grinding sludge is eliminated and the chips can be recycled. • Improved surface integrity of critical components.

www.kennametal.com

Boron

Nitrogen

B137

Superhard Tool Materials PCBN

PCBN/PCD Inserts

Grinding vs. Hard Turning

Grinding

vs.

Hard Turning

• Size tolerance specifications beyond the capability of turning.

• Surface finish requirements too tight for hard turning.

• Complex geometry that makes single-point turning more practical. • Relatively high metal removal rates. • Dry machining. • Faster machine setup. • Faster cycle times. • I.D. and O.D. machining on one machine.

B138

www.kennametal.com

Superhard Tool Materials PCBN

Where does PCBN work? PCBN is suitable for machining a wide variety of workpiece materials, mainly ferrous alloys.

Hardened Steels

Cast Irons

Superalloys

PCBN/PCD Inserts

The application areas may be broadly categorized as follows:

Powder Metallurgy Steels

Certain classes of PCBN materials are associated with each particular application. For best cost performance, proper selection of the following is essential: • Format of the insert. • Grade. • Edge prep. • Application data.

PCBN is known as the second hardest material

There are two principal material conditions where PCBN is used. Material Condition

Abrasive Wear Machining

Hard Machining

High CBN (>60%)

High and Low CBN

www.kennametal.com

B139

Superhard Tool Materials PCBN

PCBN insert formats Solid Inserts • Inserts are made only from PCBN. PCBN/PCD Inserts

• No material joint. • Best heat absorption capacity. solid

• Can work at highest temperatures.

Full-Face Inserts • Inserts are made from a presintered carbide/PCD or PCBN joint. • Elimination of the brazing joint. Less delamination. • Better heat absorption capacity. full-face

• Can work at higher temperatures than tipped tools. • Facilitate larger depth of cut compared to the same size tipped insert. • The blanks are available with “A” and “W” ISO-style pin-lock holes. Tipped Inserts • Require a carrier and substrate for the insert. • The tips are brazed to the substrate. Various brazing methods are applied. • The substrate has to have a pocket that will accommodate and support the tip. • In these types of tools, the braze joint represents the weak link, so the brazing operation is very important and should be carefully controlled and executed.

tipped

• The main advantage of tipped tools over full-faced inserts is the lower cost.

Kennametal inserts This table shows approximate tip sizes of Kennametal CBN inserts depending on style and corner radius. Please note that the maximum cutting depth is not more than 80% of the tip length.

radius

C, W

insert shape T

D, K

R 0,2mm

R 0,4mm

R 0,8mm

R 1,2mm

R 1,6mm

B140

www.kennametal.com

Superhard Tool Materials PCBN

PCBN portfolio KB5610 (KB1610)

KB5625 (KB1625)

KB5630 (KB1630)

KB1340

Grade

CBN%

PCBN/PCD Inserts

Grade

fine finishing H01

H10 hardened steel

H20

Toughness and wear behaviors of KB1630/5630 optimized for moderately to heavily interrupted cutting applications.

H30 hard milling

hardness

KB5630 offers extreme abrasion resistance for highly alloyed sintered irons.

sintered irons and PM

abrasivity GG fine boring K01 K30

gray and hard cast irons

KB1340 provides excellent toughness behavior for rough machining of cast irons. Abrasion resistance of KB1630 for chilled, hardened irons.

general machining

K01

â&#x20AC;&#x201D; superalloys

www.kennametal.com

S20

These grades compliment turning applications in superalloy turning.

B141

PCBN Hard Turning Selection System Introduction This guide will help you choose the PCBN grade, edge preparations, nose radius, feed, and recommended speed range for your hard turning applications. These recommendations will establish a starting point for optimization of the application. Where possible, this guide will lead you to standard line items. If this is not the case, the items can still be obtained through the QTSP (Quick-Turn Solutions Program) or ordered as specials. We will classify hard turning operations as any turning or boring of ferrous-based workpiece materials with a hardness (HRC) higher than 45. For workpieces with lower hardness values, PCBN is not recommended.

To use the guide, you will need this application information: • Workpiece design: interruptions, shape, and frequency. • Workpiece material specifications: hardness, superficial or through treatment, and carbide forming alloying elements (that increase the abrasivity of the material). • Depth of cut. • Surface finish requirements. • Preset conditions, such as specific nose radius, limited feed, etc. • Setup limitations related to machine tool, fixturing, etc. • Tool life criteria, e.g., surface finish, dimensional tolerance, cutting force, etc.

B142

www.kennametal.com

PCBN Hard Turning • Selection System Overview Step 1 • Choosing the PCBN Grade

Step 1, reference pages B144–B145.

Step 2 • PCBN Edge Preparation Features

Step 2, reference page B145.

Step 3 • Selection of T-Land Angle

Step 3, reference page B145.

Step 4 • Selection of T-Land Width

Step 4, reference page B146.

Step 5 • Choosing the Speed Range

Step 5, reference page B147.

www.kennametal.com

B143

Superhard Tool Materials PCBN

Grade Selection for Hard Turning How to Use

PCBN/PCD Inserts

Identify your application conditions. The most far right parameter will then determine the recommended grade(s). If more than one grade is intersected, it is recommended to first select the grade with the highest toughness (page B139) before optimizing using the Troubleshooting Guide (pages B142–B143).

Step 1 • Choosing the PCBN grade Depth of Cut (mm) Larger depths of cut need stronger grades.

0.20

0.10

0.40

0.30

0.50

0.60

0.70

Continuous/Interrupted More continuous cutting needs more crater wear resistance; more interrupts need more toughness.

Interruption Severity The angle between the cutting direction and the edge of the interruption has a big influence on the severity of an interrupt impact.

30º

0º

60º

90º

120º

Interruption Frequency A wide spacing between interrupts emphasises crater wear resistance, whereas closer-located interrupts emphasise impact resistance.

KB5610™ KB5625™ KB5630™ ISO Class Hard Turning

H10

H15

H20

H25

H30

Tool Wear Type Increased Cratering Resistance and Chemical Inertness

Increased Toughness

(continued)

B144

www.kennametal.com

Superhard Tool Materials PCBN

(continued)

cratering resistance

abrasive resistance

impact resistance

surface finish

*** ** *

* ** ***

*** ** **

KB5610™ KB5625™ KB5630™

*** = Best

PCBN/PCD Inserts

Step 1 • Choosing the PCBN grade

Step 2 • PCBN edge preparation features Edge Preparation Specifications

β , R 0.020mm

hone only

0,020mm

W x β = 0,1mm x 15°

S01015

W — Edge Prep Width α — Clearance Angle

W x β = 0,1mm x 25°

S01025

β — T-Land Angle

surface roughness (Rz)

Nose Radius and Feed vs. Surface Roughness 10

0.4

0.8

1.2

4 2 0 0

0.05

0.1

0.15

0.2

0.25

feed (f)

Step 3 • Selection of T-land angle How to Use Using the grade selection and the Interruption Severity from Step 1, select edge preparation angle or hone only, E, from the table below. Solutions in parenthesis are second options. Selection of Preparation Angle input from Step 1

KB5610

E (15°/25°)

20°/25°

KB5625

15°/25°

20°/25°

25°

KB5630

15°/25°

20°/25°

25°

25°/35°

www.kennametal.com

B145

Superhard Tool Materials PCBN

Step 4 â&#x20AC;˘ Selection of T-land width How to Use

PCBN/PCD Inserts

Example 1:

Example 2:

If the feed, depth of cut, and the tool nose radius are fixed, use these values to see what T-land width should be used.

T-land width

If you want to use a specific T-land width or hone only edge, use the chart below to see what maximum feeds and depths of cut are recommended for different nose radii.

nose radius

T-Land Width (W): E

Number in circle is NOSE RADIUS*

0,70

DOC (mm)

0,60 0,50 0,40

0,30 0,20

0,10 0,01 0,02 0,03 0,04 0,05 0,06 0,07 0,08 0,09 0,10 0,11 0,12 0,13 0,14

0,15 0,16 0,17 0,18 0,19 0,20 0,21 0,22 0,23

0,24 0,25

maximum feed recommendation (mm/rev)

T-Land Width (W): 0,1mm

Number in circle is NOSE RADIUS*

0,70

DOC (mm)

0,60 0,50

12 08

0,40

0,30

0,20 0,10 0,01 0,02 0,03 0,04 0,05 0,06 0,07 0,08 0,09 0,10 0,11 0,12 0,13 0,14

0,15 0,16 0,17 0,18 0,19 0,20 0,21 0,22 0,23

0,24 0,25

maximum feed recommendation (mm/rev)

T-Land Width (W): 0,2mm

Number in circle is NOSE RADIUS*

0,70

DOC (mm)

0,60

0,50 0,40 0,30 0,20 0,10 0,01 0,02 0,03 0,04 0,05 0,06 0,07 0,08 0,09 0,10 0,11 0,12 0,13 0,14

0,15 0,16 0,17 0,18 0,19 0,20 0,21 0,22 0,23

0,24 0,25

maximum feed recommendation (mm/rev)

*NOTE: Colored lines represent proven solutions; gray lines represent theoretically possible solutions.

B146

www.kennametal.com

Superhard Tool Materials PCBN

Step 5 โ ข Choosing the speed range How to Use

Cutting Speed Influence Tool Life

Impact Energy

Heat Generation

Increasing Speed

PCBN/PCD Inserts

Productivity

Using the application information, determine your position in the INPUT DATA table below and select the speed range area with which it intersects for each input parameter. If different speed ranges result, choose the lowest speed range. The shaded area extends to the minimum and maximum speeds for the application. The suggested starting speeds can be taken as the minimum line of this range.

Speed Range Selection for Hard Turning Depth of Cut (mm) Larger depths of cut need stronger grades.

0,20

INPUT DATA

0,10

0,30

0,40

0,50

0,60

0,70

Interruption Severity The angle between the cutting direction and the edge of the interruption has a big influence on the severity of an interrupt impact.

30ยบ

0ยบ

Workpiece Hardness (HRC)

60ยบ

120ยบ

90ยบ

Speed Range (m/min)

OUTPUT DATA

100 140 180 220 260 300 340

www.kennametal.com

B147

CBN Inserts with Chipbreaker For hardened steels, grinding is no longer the preferred method in finish turning operations because hard turning now drastically reduces cost per part. With high metal removal rates, faster machine setup, quicker cycle times, and greater flexibility, it is obviously the preferred method. Despite these advantages, hard turning has sometimes had issues with poor chip control causing surface scratching and bird-nest formations. Kennametal solved these problems by integrating special chipbreaking geometries into two high-performance PCBN grades, giving customers total control of their hard machining. Ideally, hardened steels are machined with a low or medium CBN content grade where the workpiece encounters few interruptions. However, because of CBN’s structure, the industry had not been able to add chipbreaking technology to low content CBN inserts. KB5610™ with chipbreaker is, therefore, the first product of its type to deliver chipbreaking where it’s most needed. KB5625™ with chipbreaker provides a chipbreaking solution for applications requiring more toughness. Together, these tools give Kennametal customers industry-leading flexibility in choosing the right tool for the job.

Features • Chipbreaker for improved chip control. • KB5610 ideal grade for continuous operations. • KB5625 ideal grade for continuous and interrupted operations.

KB5610

Benefits • Improved surface quality to reduce scrap rates. • Reduction of machine stops due to swarf issues to improve machine availability. • Reduction of bird-nest formation to reduce clean up time. • Two grades to choose from for best performance.

KB5625

B148

www.kennametal.com

CBN Inserts Insert without Chipbreaker

Insert with Chipbreaker

• Long chips.

• Chips are broken.

• Bird-nest formation.

Reverse gear face turning and chamfering Workpiece: Hardness:

Reverse gear 58–62 HRC Insert: Grade: vc: f: ap: Pieces/edge: Chip shape:

Competitor DNGG150412N-SV — 235 m/min (775 SFM) 0,25 mm/rev (.0098 in/rev) 0,26mm (.0098") 600 Snarling or infinite helix

Kennametal DNGM159412S0125MT CB1 KB5625 235 m/min (775 SFM) 0,35 mm/rev (.014 in/rev) 0,26mm (.0098") 900 Coiled with 3 turns

Result: Better chip control, high productivity (by increased feed), and 1.5x tool life

Hard material turning by using PCBN with chipbreaker Workpiece: Hardness:

Tube 52–58 HRC Insert: Grade: vc: f: ap: Pieces/edge: Chip shape:

Competitor DNGA442S0420MT — 120 m/min (400 SFM) 0,15 mm/rev (.0059 in/rev) 0,3mm (.012") 2 Snarling or infinite helix

Kennametal DNGM432S0525MTCB1 KB5625 120 m/min (400 SFM) 0,15 mm/rev (.0059 in/rev) 0,3mm (.012") 4 Discontinuous

Result: Better chip control and double tool life

www.kennametal.com

B149

Superhard Tool Materials PCBN

PCBN/PCD Inserts

PCBN portfolio Grade

KB5630 (KB1630)

KB1340

Grade

CBN%

GG fine boring K01

KB1340 provides excellent toughness behaviour for rough machining of cast irons.

gray and hard cast irons

Abrasion resistance of KB1630 for chilled, hardened irons.

K30

High content PCBN grades: KB1340™, KB1630™, and KB5630™ General Application Area Continuous and interrupted machining of ferrous alloys where the main wear mode is abrasive and a strong edge is required. Primary Target Workpiece Materials • Gray cast irons. • High Cr content irons. • Chilled and hardened irons. • Co-, Ni-, and Fe-based hard facing alloys. • Other alloys in which there is a high concentration of carbide forming elements, and the primary wear is abrasive.

B150

www.kennametal.com

Superhard Tool Materials PCBN

Machining gray cast iron The largest application area for KB1340™ is machining of gray cast irons. Following are a few particulars of this application: PCBN/PCD Inserts

• GCI have to be machined dry. The application needs to generate high levels of heat in order to create a protective oxide layer on the tool. • It is important to confirm with the customer that the GCI has been properly aged, and it has a sulphur content over 0.05%. • The starting point for edge preparation should be .004" (0,10mm) x 20º for finishing (DOC <0,5mm) and .008" (0,20mm) x 20º for roughing.

Proper application of KB1340 — formation of protective layer, tool life should exceed 70 km sliding distance.

• The edge preparation angle should increase if any interruptions are present, up to 35º. • Lack of aging and/or low sulphur content can lead to a decrease in tool life of up to 10 times! 25

• A slow feed approach/engagement of the tool is recommended to minimize chipping and notching.

0.008% S 0.09% S

tool life (mm)

20 15 10 5 0

400 m/min

800 m/min

cutting speed, vc (m/min)

Comparison of the life of PCBN cutting tools in machining two different gray cast irons, primarily differing in sulphur content.

Application recommendations speed m/min workpiece material hot-work tool steels — roughing

feed SFM

depth of cut in

min

max

min

max

min

max

150

165

495

0,2

0,5

165

min

mm max

min

max

min

0,008 0,020

0,8

3,0

0,031 0,118

max

cold-work tool steels — roughing

150

495

0,2

0,5

0,008 0,020

0,8

3,0

0,031 0,118

gray cast iron — roughing

700

1200 2310 3960

0,2

0,6

0,008 0,024

0,5

3,0

0,020 0,118

gray cast iron — finishing

750

1500 2475 4950

0,1

0,3

0,004 0,012

—

0,5

0,000 0,020

CGI and NCI — roughing

300

165

990

0,2

0,5

0,008 0,020

0,5

2,0

0,020 0,079

chilled cast iron — roughing

150

495

0,2

0,6

0,008 0,024

0,5

3,0

0,020 0,118

chilled cast iron — finishing

150

495

0,1

0,3

0,004 0,012

—

0,5

0,000 0,020

hard facings — as per bearing steel

200

198

660

0,1

0,5

0,004 0,020

0,2

3,0

0,008 0,118

high Cr irons

250

264

825

0,1

0,6

0,004 0,024

0,2

3,0

0,008 0,118

High-content PCBN grades are intended for use in negative rake clamp-type toolholders, boring, recessing tools, and milling heads. Due to the dynamic loads that occur in the machining of hard ferrous materials and the conditions under which these grades operate, frequently involving shocks from interrupted cutting, it is advisable to strengthen the tool system as much as possible and use dimpled inserts where possible.

www.kennametal.com

B151

Dimple Clamps for Added Stability Typical Application Continuous cost pressures force manufacturers of gray cast iron brake disks to look for cost-cutting solutions. CBN inserts deliver high productivity and long tool life. Kennametal has developed the solid, high-content grade KB1340™, which provides superior performance when machining gray cast iron components, such as brake disks or fly wheels. To ensure secure seating in the toolholder, the inserts are available with dimple-design clamping. The clamps fit Ceramtec holders, which makes the conversion to Kennametal tooling easier.

Higher Productivity and Profitability • Ensures tight and rigid clamping. • Dimpled insert with special clamping provides increased stability in the pocket. • Ideal for use in heavy-duty machining applications. • Cladded clamps for improved resistance against chip wash are available upon request. • The shallow dimple design enables the use of less expensive 3/16" (4,76mm) inserts. • Round dimple design works with custom tooling where clamping direction must be offset due to space limitations.

B152

www.kennametal.com

Featured Applications: Brake Disk Machining Proven solutions Workpiece: Material:

Brake disk GGG 60 Insert: vc: f: ap: Performance:

Competitor CBN N/A 1100 m/min (3600 SFM) 0,4 mm/rev (.016 in/rev) 2mm (.079") 1500 pieces

Kennametal KB1340 SNMN120416502020 1100 m/min (3600 SFM) 0,4 mm/rev (.016 in/rev) 2mm (.079") 1700 pieces

Insert: vc: f: ap: Performance:

Competitor Ceramic N/A 800 m/min (2600 SFM) 0,5 mm/rev (.02 in/rev) 1,5mm (.059") 120 pieces

Kennametal CBN KB1340 CNGX433S0415FW 1500 m/min (5000 SFM) 0,5 mm/rev (.02 in/rev) 1,5mm (.059") 4200 pieces

Clamp selection chart clamp

insert ANSI catalog number CNGX433S0415 CNGX433S0415FW

ISO catalog number CNGX120412S01015 CNGX120412S01015FW

catalog number 551.718 - 100˚ Corner 551.718 - 100˚ Corner

MM 3968904 3968904

CNGX434S0820 CNGF432

CNGX120416S02020 CNGF120408

551.718 - 100˚ Corner 551.718 - 100˚ Corner

3968904 3968904

DNGX434S0820

DNGX150416S02020

551.720

4094234

SNGX434S0820 SNGX534S0820

SNGX120416S02020 SNGX150416S02020

551.718 551.718

3968904 3968904

VNGX333S0820 TNGX333EFW

VNGX160412S02020 TNGX160412EFW

551.721 551.733

4094236 4094235

Application recommendation vc: 800–1500 m/min

Certain melts of gray cast iron can exhibit poor machinability — by as much as two orders of magnitude — related to either insufficient aging or composition.

Good GG25 (0.05 S) 62 km sliding distance @ 1500 m/min

www.kennametal.com

B153

Superhard Tool Materials PCBN

Gray cast iron brake disk machining â&#x20AC;˘ Ceramic vs. PCBN

PCBN/PCD Inserts

silicon nitride

PCBN

(a)

200

400

PCBN

600

800

1000

2000

4000

6000

cutting speed, vc (m/min)

tool life (parts per edge)

(b)

(c)

8000

PCBN increases productivity when machining gray iron brake disks (a) in terms of cutting speed (b) and tool life (c) compared to silicon nitride ceramic.

Brake disk machining example

Optimized Process

Starting Situation

Tool Material:

black ceramic

Tool Life:

40 brake disks

Tool Life:

PCBN 2000 brake disks

Tool Change Time Machining Time Saved

17.8%

0,2%

94%

B154

82%

www.kennametal.com

Superhard Tool Materials PCBN

Grade

KB5610

KB5625

KB5630

Grade

CBN%

PCBN/PCD Inserts

PCBN portfolio

hardness

KB5630 offers extreme abrasion resistance for highly alloyed sintered irons.

sintered irons and PM

abrasivity

PM machining • Inlet/outlet valve

50 µm

50 µm Intake

Exhaust • Abrasive with hard particle content:

• Principally, structure is hard steel.

Martensite — 800 HK

• Minimal porosity on well sintered.

WMoC — 1600 HK

• Low/medium alloy content.

VC — 2800 HK

• Macro-hardness >400 HV (>41 HRC).

• High porosity/Cu infiltrated. • Co increases hot hardness.

• Derives wear resistance from hardened matrix structure.

• Macro-hardness <400 HV (<41 HRC). • Derives wear resistance from hard particles.

www.kennametal.com

B155

Superhard Tool Materials PCBN

PCBN/PCD Inserts

PCBN grade selection for valve seat machining

600 KB5610 KB5625 500

hardness, HV

CHEMICAL WEAR RESISTANCE

KB5630

typical inlet valve seat iron

400

300

typical outlet valve seat iron

200

content of carbide formers (%)

ABRASIVE WEAR RESISTANCE

B156

www.kennametal.com

Superhard Tool Materials PCBN

PCBN grade selection for valve seat machining

Soft matrix (≤300 HV), hard carbides, high porosity

Highly Abrasive

High Hardness

Both material types with single insert

Hard matrix (≥400 HV), few carbides, low porosity

www.kennametal.com

short engagement (e.g., plunging)

long engagement (e.g., generating)

1. Abrasion resistance 2. Strength #1 Choice: KB5630™

1. Abrasion resistance 2. Strength 3. Chemical wear resistance #1 Choice: KB5630

1. Abrasion resistance 2. Chemical wear resistance 3. Strength #1 Choice: KB5630 #2 Choice: KB5625™

1. Abrasion and chemical wear resistance 2. Strength #1 Choice: KB5625 #2 Choice: KB5630

1. Chemical wear resistance 2. Strength 3. Abrasion resistance #1 Choice: KB5625 #2 Choice: KB5610™

1. Chemical wear resistance 2. Abrasion resistance 3. Strength #1 Choice: KB5625 #2 Choice: KB5610

PCBN/PCD Inserts

material to be machined

B157

A4™ Grooving and Turning System • One tool for turning, facing, grooving, and face grooving in O.D. and I.D. applications — that means exceptionally fast cycle times and no turret indexes.

Clamping Design

• Extra-long clamping area, ground 120° bottom prism seating surface, and an exclusive top guide rail combine to deliver unsurpassed grooving and side-turning stability! • Precise insert positioning is ensured for accurate cuts!

Applications Test result • A4 Tool: Material: Diameter:

B158

A4R0400M04800E KB1630 INCONEL® 718 983mm

Cutting Data Speed: Feed: DOC: Diameter: Performance:

Competitor 180 m/min (600 SFM) 0,3mm/rev (.0051 in/rev) 8mm (.31") 30mm (1.18") 70–140 pieces

Kennametal 180 m/min (600 SFM) 0,3mm/rev (.0051 in/rev) 8mm (.31") 30mm (1.18") 160–200 pieces

www.kennametal.com

Top Notch™ Grooving System Our rigid clamping design prevents insert movement. This benefit ensures excellent surface finish, improved productivity, and superior tool life and promotes perfect concentricity. The rugged bridge clamp generates locking forces in three directions to provide superior resistance to side thrust and tangential forces.

Clamping Design

Applications Test result • Top Notch Tool: Material: Machine:

WSP 4121129 Top Notch KB5625 DIN 16MnCr5/AISI 5115, 59–63 HRC Hard/soft machining

www.kennametal.com

Cutting Data Speed: Feed: DOC: Diameter: Performance:

Competitor 160 m/min (530 SFM) 0,06 mm/rev (.0024 in/rev) 2mm (.079") 39,5mm (1.56") 70 pieces

Kennametal 160 m/min (530 SFM) 0,06 mm/rev (.0024 in/rev) 2mm (.079") 39,5mm (1.56") 90 pieces

B159

Superhard Tool Materials PCBN

PCBN/PCD Inserts

Quick Optimization Guide: Troubleshooting for Catastrophic Failure Tool Failure Criteria

Catastrophic Failure (loss of cutting edge) Example of catastrophic failure

Spalling on Rake Face

Chipping on Flank Face

Preceded by Extensive Crater Wear Example of crater wear

Yes

1, 4, 12, 3

3, 8, 7, 12, 11, 14, 5

Remedial Action 1. Select more inert PCBN grade.

9. Decrease chamfer angle.

2. Select more abrasion-resistant PCBN grade.

10. Increase clearance angle.

3. Select stronger PCBN grade.

11. Reduce clearance angle.

4. Reduce cutting speed.

12. Increase edge hone dimension.

5. Increase cutting speed.

13. Reduce edge hone dimension.

6. Reduce nose radius.

14. Reduce feed and/or depth of cut.

7. Increase nose radius.

15. Increase feed and/or depth of cut.

8. Increase chamfer angle.

B160

www.kennametal.com

Superhard Tool Materials PCBN

PCBN/PCD Inserts

Quick Optimization Guide: Troubleshooting for Non-Catastrophic Failure Tool Failure Criteria

Non-Catastrophic Failure (workpiece-related failure)

Surface Finish

Form Errors

Preceded by Extensive Flank Wear Example of flank wear

Yes

2, 10, 4

14, 13, 6, 3, 5

Remedial Action 1. Select more inert PCBN grade.

9. Decrease chamfer angle.

2. Select more abrasion-resistant PCBN grade.

10. Increase clearance angle.

3. Select stronger PCBN grade.

11. Reduce clearance angle.

4. Reduce cutting speed.

12. Increase edge hone dimension.

5. Increase cutting speed.

13. Reduce edge hone dimension.

6. Reduce nose radius.

14. Reduce feed and/or depth of cut.

7. Increase nose radius.

15. Increase feed and/or depth of cut.

8. Increase chamfer angle.

www.kennametal.com

B161

Quick-Turn Solutions Program for CBN Inserts Standard inserts incorporate latest grade, coating, edge preparation, and manufacturing technology. They cover a wide range of applications and provide superior performance. However, in some cases, further fine tuning is needed to reach the optimum performance point. Therefore, Kennametal has set up the Quick-Turn Solutions Program (QTSP) to allow edge preparation modifications on selected styles, grades, and formats to further enhance the tool performance.

Technical Details â&#x20AC;˘ Options for a Customization Decide nose radius.

Add wiper.

Decide T-land width and angle.

Decide hone size.

Various shapes from which to choose.

Multitipped, full tops, and solid inserts are part of the program.

Seven grades are available. High and low content, coated and uncoated.

For more information, please contact a Kennametal Sales Representative, Authorized Kennametal Distributor, or visit www.kennametal.com.

B162

www.kennametal.com

Teardrop (TD Edges) for Demanding Applications Teardrop (TD) edges are advanced edge preparations used in heavily interrupted operations where standard edge preps fail. They can be ordered as specials.

Possible TD Edges β

W — Edge Prep Width

Wxβ

α — Clearance Angle β — Edge Prep Angle — between rake face and K-land α

R1 R2

R 0,020mm E

Edge Preparation Specifications E

hone only

TD-Style Selection 0,020mm

DOC in mm 0

Wxβ

width in 0,001mm x angle

TDR

ellipse based on 0,25 x 30°

TDR

TDF

ellipse based on 0,20 x 20°

TDF

TDS

ellipse based on 0,10 x 20°

TDS

www.kennametal.com

0,15

0,30

0,45

0,60

0,75

B163

Superhard Tool Materials PCD

PCD

PCBN/PCD Inserts

The current global metalcutting climate has put increased focus on high productivity and cost reductions coming from cutting tools. These requirements lead to the rapid growth and implementation of cutting tools using superhard materials. As the name implies, these materials have a significant advantage in hardness over conventional tool materials, which from the end user point of view, translates into increased productivity (higher cutting speeds, longer tool life, etc.), lower tooling cost per part, and also, the ability to process materials previously un-machinable with conventional tooling. The most widely known superhard materials are diamond and cubic boron nitride. Our industry uses the polycrystalline forms of these materials, i.e., polycrystalline diamond (PCD) and polycrystalline boron nitride (PCBN). PCD tooling is mainly targeted at the machining of non-ferrous materials (e.g., aluminum alloys, plastics, CFRPs, composites, titanium alloys, ceramics, carbides, etc.) whereas PCBN targets iron-based alloys (e.g., cast irons, hard steels, iron-based composites, etc.) Kennametal is at the forefront of developing and implementing superhard materials in our standard and special tooling solutions across all our product lines. Kennametalâ&#x20AC;&#x2122;s approach to superhard tooling starts with customer needs and constraints. We then use fundamental research to develop the best superhard solutions that would make available the best value for the customer and respond to their specific demands.

www.kennametal.com

Carbon

B165

Superhard Tool Materials PCD

Different kinds of PCD grades Application demands determine the choice of cutting tool material. The important requirements of the material are: • Abrasion resistance. PCBN/PCD Inserts

• Toughness and strength. • Thermal behavior.

Fine Grain

Medium Grain

Coarse Grain

Increased Cutting Edge Quality (and Strength)

Increased Abrasion Resistance

Comparison of different PCD grades Behavior in Applications grade characteristics:

KD1400™

fine grain

medium grain

grain size:

0,5–1 µm

2 µm

10 µm

chip resistance:

•••••••••• ••••••••• ••••• •••

•••••••• •••••

grade characteristics:

coarse grain

KD1425™

KD1405™

grain size:

25 µm

2–30 µm

0 µm

chip resistance:

••••••• •••••••

•••••• ••••••••

••••••• ••••••••••

abrasion resistance: Behavior in Applications

abrasion resistance:

Chipping can be defined as the formation of small notches on the cutting edge and generally occurs when the load at the cutting edge exceeds the strength of the material. An A390 alloy was used in edge milling tests to assess the chip resistance of the different PCD grades. Abrasion is characterized by the development of grooves and ridges on the flank of the tool in the direction of sliding. The abrasion resistance of PCD was evaluated on a high silicon aluminum alloy, A390, in a continuous cutting operation.

B166

www.kennametal.com

Superhard Tool Materials PCD

PCD grain size • Workpiece surface finish coarse

PCBN/PCD Inserts

medium KD1425™ fine KD1400™ 0.3

0.4

0.5

0.6

0.7

0.8

This chart illustrates the influence of the PCD grain size on surface finish in turning 18% silicon aluminum alloys. The best finish is obtained with the submicron grade KD1400. While the grade KD1425 contains grains as large as 30 microns, this material’s unique multimodal grain size distribution results in a microstructure of closely packed diamond grains resulting in a smoother ground edge.

KD1400 advantages at a glance • Summary A sharper cutting edge

A less serrated (smoother) cutting edge

• Clean cuts on carbon fibers. • Permits larger nose radii for increased feed and productivity without loss in finish.

• Improved surface finish — potentially reducing rough and intermediate honing.

Permits a more positive rake

• Reduced cutting forces, delamination, and burr formation.

Permits increased clearance

• Providing for lower tool wear rates and lower push-off forces — thereby improving process capability.

Provides unparalleled chip resistance

• Suitable for heavy milling and interrupted turning with positive edge geometries and longest tool life.

Comparable abrasion resistance to a coarse grade PCD

• Covers the widest range of applications with a single grade — reduce inventory and complexity.

www.kennametal.com

B167

Superhard Tool Materials PCD

PCD grades application/workpiece material MMC

PCBN/PCD Inserts

KD1425™

AISi alloys >13% Si

AISi alloys <13% Si

KD1400™ wrought AI alloys super finishing

finishing

general machining

roughing

APPLICATION SEVERITY

PCD application areas and parameter range speed material machined aluminum alloy

operation turning

4–8% Si

milling

9–12% Si

turning milling

>13 Si

KD1400

min

max

feed rate SFM

min

mm/rev

max

min

max

1000 4000 3300 13200

0,1

2000 5000 6600 16500 700

DOC

in/rev min

max

min

max

min

0,4

0,004 0,016

0,1

4,0

0,004 0,157

max

0,1

0,3

0,004 0,012

0,1

0,3

0,004 0,012

3000 2310

9900

0,1

0,4

0,004 0,016

0,1

4,0

0,004 0,157

KD1400/KD1425 1000 3000 3300

9900

0,1

0,3

0,004 0,012

0,1

0,3

0,004 0,012

turning

KD1425

300

1000

990

3300

0,1

0,4

0,004 0,016

0,1

4,0

0,004 0,157

milling

KD1400

500

1500 1650

4950

0,1

0,3

0,004 0,012

0,1

0,3

0,004 0,012 0,020 0,118

cast iron

roughing

300

165

990

0,2

0,5

0,008 0,020

0,5

3,0

CGI/NCI

finishing

400

165

1320

0,1

0,3

0,004 0,012

—

0,5

300

700

990

2310

0,1

0,4

0,004 0,016

0,2

1,5

0,008 0,059

400

1300 1320

4290

0,03

0,3

0,001 0,012 0,05

2,0

0,002 0,079

120

396

0,1

0,4

0,004 0,016

0,2

1,0

0,008 0,039

198

0,1

0,25 0,004 0,010

0,1

0,5

0,004 0,020

—

120

231

396

0,1

0,4

0,004 0,016

0,2

1,0

0,008 0,039

100

165

330

0,1

0,25 0,004 0,010

0,1

0,5

0,004 0,020

—

300

990

8250

0,05

0,3

0,002 0,012

0,2

3,0

0,004 0,118

200

660

3300

0,05

0,5

0,002 0,020

0,1

3,0

0,004 0,118

MMC 20% Sic/Al copper alloys copper, zinc, bass tungsten carbide <16% Co unsintered (green) sintered ceramics unsintered sintered plastics/composites carbon/graphite

B168

PCD grade

m/min

KD1425

turning/milling

KD1400

turning

KD1425

—

turning

KD1425

—

turning/milling KD1400/KD1425

—

0,020

—

www.kennametal.com

Superhard Tool Materials PCD

PCD tool failure modes The gradual wear observed on diamond cutting tools can be divided into: • Mechanically activated wear (abrasion, adhesion, and wear by microfracture). PCBN/PCD Inserts

• Tribochemical wear (dissolution/diffusion wear and formation of new chemical compounds). Abrasion The primary mode of mechanically activated wear for diamond cutting tools is abrasion, which is the removal of tool material by a scoring action of protruding asperities and hard phase inclusions in the workpiece and chip (e.g., silicon grains in aluminum-silicon alloys). Abrasion is characterized by the development of grooves and ridges in the direction of the tool sliding against a newly machined surface of the workpiece or chip sliding against the rake face. The severity of abrasion can be increased in cases where the workpiece material contains hard inclusions or when there is hard wear debris from the workpiece or the tool at the interface. Tribochemical Tribochemical wear is particularly relevant in the machining of titanium alloys when the carbon in the tool material diffuses into the adhered titanium layer to form a TiC boundary layer on the rake face of the tool. This boundary quickly becomes saturated with tool constituents and can then act as a protective barrier against any further diffusion. Attrition When two surfaces slide over each other, particularly in the absence of a lubricant, some adhesion can occur at the points of contact. Adhesive wear (often called attrition) in cutting tools involves the mechanism in which individual grains or small grain aggregates are pulled out of the tool surfaces and are carried away at the underside of the chip or are torn away by the adherent workpiece. The term “plucking” is also used to describe the loss of tool particles from the edge or faces. For example, when the forces are high enough, the TiC boundary layer that forms in titanium machining can be removed from the rake face of the tool transporting with it a pulled-out diamond grain, to form a crater. Once this crater becomes excessive, fracture of the tool could occur due to the geometrical weakening of the edge. Negative geometries tend to enhance the possibility of adhesive wear and built-up edge formation. Subsequent break-up (fracture) of the adhesive tool/workpiece joints results in attrition wear. The wear scars produced by attrition are rough, as opposed to the usually smooth wear surfaces generated by tribochemical wear. Microfracture When cutting tools are employed for continuous machining of high hardness materials or interrupted machining, small fractures can appear on the cutting edge. If fracturing is small, the cutting tool can usually still be used. Wear by microfracture involves a less severe form of fracture and includes chipping, spalling, and cracking whereby the cutting tool can be reused.

www.kennametal.com

B169

Superhard Tool Materials PCD

PCBN/PCD Inserts

Tool Failure and Wear: Tool Failure Criteria

Catastrophic Failure (loss of cutting edge)

Fracture

Thermal Degradation

Nose Breakage

Extensive Flank Wear/Cracking

11, 1, 2, 15, 3, 4, 5

16, 17, 2, 4, 3, 5

Remedial Action 1. Increase nose radius.

10. Increase lead angle.

2. Reduced clearance angle.

11. Select a tougher grade.

3. Reduce feed.

12. Select more abrasion-resistant grade.

4. Reduce cutting speed.

13. Select a higher TRS grade.

5. Reduce DOC.

14. Choose a more chemically inert grade.

6. Increase clearance angle.

15. Increase thickness.

7. Use a positive rake angle.

16. Select a more thermally stable grade.

8. Add a small edge hone.

17. Use coolant.

9. Use neutral rake angle.

B170

www.kennametal.com

Superhard Tool Materials PCD

PCBN/PCD Inserts

Tool Failure and Wear: Tool Failure Criteria

Non-Catastrophic Failure (gradual/progressive wear)

Abrasion

Adhesion

Wear by Fracture

Diffusion

New Chemical Compound

Grooves and Ridges on Flank

BUE and Crater Wear

Chipping and Spalling

Crater Wear

12, 6, 4, 3

7, 17, 4

13, 2, 8, 9, 5, 3, 1

14, 4, 17, 10, 1

Remedial Action 1. Increase nose radius.

10. Increase lead angle.

2. Reduced clearance angle.

11. Select a tougher grade.

3. Reduce feed.

12. Select more abrasion-resistant grade.

4. Reduce cutting speed.

13. Select a higher TRS grade.

5. Reduce DOC.

14. Choose a more chemically inert grade.

6. Increase clearance angle.

15. Increase thickness.

7. Use a positive rake angle.

16. Select a more thermally stable grade.

8. Add a small edge hone.

17. Use coolant.

9. Use neutral rake angle.

www.kennametal.com

B171

Superhard Tool Materials PCD

Machining of carbides with superhards speed

PCBN/PCD Inserts

material machined

feed rate

m/min

SFM

mm/rev

operation

PCD grade

min

max

min

max

min

unsintered (green)

turning

KD1425

120

396

0,1

0,4

sintered

turning

KD1425

264

0,1

unsintered (green)

turning

KB1340

150

165

495

0,1

0,5

sintered

turning

KB1340

100

330

0,1

0,4

max

DOC

in/rev min

max

min

max

min

max

0,004 0,016

0,2

1,0

0,008 0,039

0,25 0,004 0,010

0,1

0,5

0,004 0,020

0,2

1,0

0,008 0,039

0,004 0,016

0,1

0,5

0,004 0,020

tungsten carbide <19% Co

tungsten carbide >19% Co

Application Notes • PCD tools should be used with a neutral geometry and 7º clearance. • PCD edge preparation should be either F or E. An E edge preparation is preferred for larger DOCs, low Co content, and interrupted machining. • PCBN tools should be used in a negative geometry with 5º to 7º negative rake.

• PCBN edge preparation should be either E or S01025. • Coolant application is recommended and very important, especially with PCD application where failure is determined by heat generation. • PCD can also be applied for Co concentrations higher than 19% as long as minimal heat is generated.

Machining Carbide with Superhards 60

m/min

KB1340

cutting speed

30 KB5630 KD1425 20

KD1400

0 5

PCD

B172

15 cobalt content

Wt%

PCBN

www.kennametal.com

Superhard Tool Materials PCD

Machining Parameters

Tool Life Criteria

• Feed = 0,1mm (.0038")

• VB max = 0,3mm (.0098")

• Depth of cut = 0,25mm (.0098")

• Number of bores = 1500

PCBN/PCD Inserts

CGI boring with turning insert

CGI Tool Life Results, Estimated Number of Bores fn = 1 mm/rev (.0038 in/rev) ap = 0,25mm (.0098") cermet 200 m/min 660 SFM

TARGET

mixed ceramic 200 m/min 660 SFM coated carbide 100 m/min 330 SFM KB1610™ 300 m/min 990 SFM

KB1610 200 m/min 660 SFM KD1425™ 200 m/min 660 SFM

500

1000

1500

2000

2500

3000

3500

4000

4500

number of bores

Six-Edge Tool

www.kennametal.com

Single-Edge Tool

B173

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v

v v v v v v

CNGA D ISO catalog number CNGA120404E CNGA120408E

ANSI catalog number CNGA431E CNGA432E

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Kenloc™ Inserts

v v

CNGA-EMT D ISO catalog number CNGA120408EMT CNGA120412EMT

ANSI catalog number CNGA432EMT CNGA433EMT

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,8 1,2

in 1/32 3/64

v v

CNGA-FST D ISO catalog number CNGA120404FST CNGA120408FST

ANSI catalog number CNGA431FST CNGA432FST

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

CNGA-FW/MW MT D

B174

Rε

L10

ISO catalog number CNGA120404S01025FWMT CNGA120404EFWMT

ANSI catalog number CNGA431S0425FWMT CNGA431EFWMT

mm 12,70 12,70

in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,4

in 1/64 1/64

CNGA120408EFWMT CNGA120408S01025FWMT

CNGA432EFWMT CNGA432S0425FWMT

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

0,8 0,8

1/32 1/32

CNGA120412EFWMT CNGA120416S02015MWMT

CNGA433EFWMT CNGA434S0815MWMT

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,2 1,6

3/64 1/16

v v v

v v

www.kennametal.com

Superhard Inserts Kenloc™ Inserts

first choice

alternate choice

v v v j v v j

v v v v v v

CNGA-MT Rε

L10

ISO catalog number CNGA120404S01025MT CNGA120408S01020MT

ANSI catalog number CNGA431S0425MT CNGA432S0420MT

mm 12,70 12,70

in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

CNGA120408S02020MT CNGA120408S01025MT

CNGA432S0820MT CNGA432S0425MT

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

0,8 0,8

1/32 1/32

CNGA120412S01025MT CNGA120412S01020MT

CNGA433S0425MT CNGA433S0420MT

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,2 1,2

3/64 3/64

CNGA120412T02020MT CNGA120416S01020MT

CNGA433T0820MT CNGA434S0420MT

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

1,2 1,6

3/64 1/16

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

v v v v v v v v v v v v v v v v

v v v v

v v

CNGA-ST D

Rε

L10

ISO catalog number CNGA120404S01025ST CNGA120408S01025ST

ANSI catalog number CNGA431S0425ST CNGA432S0425ST

mm 12,70 12,70

in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

CNGA120412S01025ST

CNGA433S0425ST

12,70

1/2

12,90

.508

1,2

3/64

CNGM-CB1 D

Rε

L10

ISO catalog number CNGM120404S01325MTCB1 CNGM120408S01325MTCB1

ANSI catalog number CNGM431S0525MTCB1 CNGM432S0525MTCB1

mm 12,70 12,70

in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

CNGM120412S01325MTCB1

CNGM433S0525MTCB1

12,70

1/2

12,90

.508

1,2

3/64

CNGM-CB2 D

Rε

L10

ISO catalog number CNGM120404S01325MTCB2 CNGM120408S01325MTCB2

ANSI catalog number CNGM431S0525MTCB2 CNGM432S0525MTCB2

mm 12,70 12,70

in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

CNGM120412S01325MTCB2

CNGM433S0525MTCB2

12,70

1/2

12,90

.508

1,2

3/64

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B175

PCBN/PCD Inserts

P M K N S H

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v

v v v v v v

CNMA D

Rε

L10

ISO catalog number CNMA120408S01025 CNMA120408S02020

ANSI catalog number CNMA432S0425 CNMA432S0820

mm 12,70 12,70

in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,8 0,8

in 1/32 1/32

CNMA120412S02020

CNMA433S0820

12,70

1/2

12,90

.508

1,2

3/64

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Kenloc™ Inserts

v v v

CNMS-E D ISO catalog number CNMS120408E

ANSI catalog number CNMS432E

mm 12,70

Rε

L10 in 1/2

mm 12,90

in .508

mm 0,8

in 1/32

CNMS-FST D ISO catalog number CNMS120404FST CNMS120408FST

ANSI catalog number CNMS431FST CNMS432FST

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

DNGA D ISO catalog number DNGA150404E DNGA150408E

ANSI catalog number DNGA431E DNGA432E

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 15,50 15,50

in .610 .610

mm 0,4 0,8

in 1/64 1/32

v v

DNGA-EMT D ISO catalog number DNGA150408EMT DNGA150412EMT

B176

ANSI catalog number DNGA432EMT DNGA433EMT

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 15,50 15,50

in .610 .610

mm 0,8 1,2

in 1/32 3/64

v v

www.kennametal.com

Superhard Inserts Kenloc™ Inserts

first choice

alternate choice

v v v j v v

v v v v v v

D ISO catalog number DNGA150404FST DNGA150408FST

ANSI catalog number DNGA431FST DNGA432FST

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 15,50 15,50

in .610 .610

mm 0,4 0,8

in 1/64 1/32

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

DNGA-FST

DNGA-FW/MW MT D

Rε

L10

ISO catalog number DNGA150404EFWMT DNGA150408EFWMT

ANSI catalog number DNGA431EFWMT DNGA432EFWMT

mm 12,70 12,70

in 1/2 1/2

mm 15,50 15,50

in .610 .610

mm 0,4 0,8

in 1/64 1/32

DNGA150412EFWMT

DNGA433EFWMT

12,70

1/2

15,50

.610

1,2

3/64

DNGA-MT D

Rε

L10

ISO catalog number DNGA150404S01025MT DNGA150408S01020MT

ANSI catalog number DNGA431S0425MT DNGA432S0420MT

mm 12,70 12,70

in 1/2 1/2

mm 15,50 15,50

in .610 .610

mm 0,4 0,8

in 1/64 1/32

DNGA150408S01025MT DNGA150412S01025MT

DNGA432S0425MT DNGA433S0425MT

12,70 12,70

1/2 1/2

15,50 15,50

.610 .610

0,8 1,2

1/32 3/64

v v v v

v v v v v v v v v

DNGM-CB1 D ISO catalog number DNGM150408S01325MTCB1 DNGM150412S01325MTCB1

ANSI catalog number DNGM432S0525MTCB1 DNGM433S0525MTCB1

C2–C70

www.kennametal.com

mm 12,70 12,70

C72–C118

Rε

L10 in 1/2 1/2

mm 15,50 15,50

C119–C129

in .610 .610

C130–C161

mm 0,8 1,2

in 1/32 3/64

B10–B23

v v

B24–B31

B32–B37

B177

PCBN/PCD Inserts

P M K N S H

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v

v v v v v v

DNGM-CB2 D ISO catalog number DNGM150408S01325MTCB2 DNGM150412S01325MTCB2

ANSI catalog number DNGM432S0525MTCB2 DNGM433S0525MTCB2

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 15,50 15,50

in .610 .610

mm 0,8 1,2

in 1/32 3/64

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Kenloc™ Inserts

v v

DNMA D ISO catalog number DNMA110408S02020 DNMA110412S02020

ANSI catalog number DNMA332S0820 DNMA333S0820

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 11,63 11,63

in .458 .458

mm 0,8 1,2

in 1/32 3/64

v v

DNMS-FST D ISO catalog number DNMS150404FST DNMS150408FST

ANSI catalog number DNMS431FST DNMS432FST

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 15,50 15,50

in .610 .610

mm 0,4 0,8

in 1/64 1/32

SNGA-FW D ISO catalog number SNGA120408S01020FWMT

B178

ANSI catalog number SNGA432S0420FWMT

mm 12,70

Rε

L10 in 1/2

mm 12,70

in .500

mm 0,8

in 1/32

www.kennametal.com

Superhard Inserts Kenloc™ Inserts

first choice

alternate choice

v v v j v v

v v v v v v

Rε

L10

ISO catalog number SNGA120404S01025MT SNGA120408S01025MT

ANSI catalog number SNGA431S0425MT SNGA432S0425MT

mm 12,70 12,70

in 1/2 1/2

mm 12,70 12,70

in .500 .500

mm 0,4 0,8

in 1/64 1/32

SNGA120412S01025MT

SNGA433S0425MT

12,70

1/2

12,70

.500

1,2

3/64

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

SNGA

v v

SNMA D

Rε

L10

ISO catalog number SNMA120408S01025 SNMA120408S02020

ANSI catalog number SNMA432S0425 SNMA432S0820

mm 12,70 12,70

in 1/2 1/2

mm 12,70 12,70

in .500 .500

mm 0,8 0,8

in 1/32 1/32

SNMA120412S01025 SNMA120412S02020

SNMA433S0425 SNMA433S0820

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

1,2 1,2

3/64 3/64

SNMS-FST D ISO catalog number SNMS120408FST SNMS120412FST

ANSI catalog number SNMS432FST SNMS433FST

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 12,70 12,70

in .500 .500

mm 0,8 1,2

in 1/32 3/64

v v

TNGA-FW MT D ISO catalog number TNGA160408EFWMT TNGA160412EFWMT

ANSI catalog number TNGA332EFWMT TNGA333EFWMT

C2–C70

www.kennametal.com

mm 9,53 9,53

C72–C118

Rε

L10 in 3/8 3/8

mm 16,50 16,50

C119–C129

in .650 .650

C130–C161

mm 0,8 1,2

in 1/32 3/64

B10–B23

v v

B24–B31

B32–B37

B179

PCBN/PCD Inserts

P M K N S H

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v

v v v v v v

TNGA D

Rε

L10

ISO catalog number TNGA160404S01025MT TNGA160408S01020MT

ANSI catalog number TNGA331S0425MT TNGA332S0420MT

mm 9,53 9,53

in 3/8 3/8

mm 16,50 16,50

in .650 .650

mm 0,4 0,8

in 1/64 1/32

TNGA160408S01025MT TNGA160412S01025MT

TNGA332S0425MT TNGA333S0425MT

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

0,8 1,2

1/32 3/64

TNGA160416S01025MT

TNGA334S0425MT

9,53

3/8

16,50

.650

1,6

1/16

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Kenloc™ Inserts

v v v v

v v

TNMS-FST D ISO catalog number TNMS160404FST TNMS160408FST

ANSI catalog number TNMS331FST TNMS332FST

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 16,50 16,50

in .650 .650

mm 0,4 0,8

in 1/64 1/32

VNGA-FST D ISO catalog number VNGA160404FST VNGA160408FST

ANSI catalog number VNGA331FST VNGA332FST

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 16,61 16,61

in .654 .654

mm 0,40 0,80

VNGA-MT D ISO catalog number VNGA160404S01025MT VNGA160408S01025MT

ANSI catalog number VNGA331S0425MT VNGA332S0425MT

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 16,61 16,61

in .654 .654

mm 0,4 0,8

in 1/64 1/32

v v v v v v v v v v v v

VNMS-E D ISO catalog number VNMS160404E VNMS160408E

B180

ANSI catalog number VNMS331E VNMS332E

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 16,61 16,61

in .654 .654

mm 0,4 0,8

in 1/64 1/32

v v

www.kennametal.com

Superhard Inserts Kenloc™ Inserts

first choice

alternate choice

v v v j v v

v v v v v v

D ISO catalog number VNMS160404FST VNMS160408FST

ANSI catalog number VNMS331FST VNMS332FST

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 16,61 16,61

in .654 .654

mm 0,4 0,8

in 1/64 1/32

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

VNMS-FST

WNGA-FST D ISO catalog number WNGA080404FST WNGA080408FST

ANSI catalog number WNGA431FST WNGA432FST

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 8,69 8,69

in .342 .342

mm 0,4 0,8

in 1/64 1/32

v v

WNGA-FW/MT D ISO catalog number WNGA080412S01020FWMT

ANSI catalog number WNGA433S0420FWMT

mm 12,70

Rε

L10 in 1/2

mm 8,69

in .342

mm 1,2

in 3/64

WNGA D ISO catalog number WNGA080404S01025MT WNGA080408S01025MT

ANSI catalog number WNGA431S0425MT WNGA432S0425MT

C2–C70

www.kennametal.com

mm 12,70 12,70

C72–C118

Rε

L10 in mm 1/2 8,69 1/2 8,69

in .342 .342

C119–C129

mm 0,4 0,8

in 1/64 1/32

C130–C161

max mm 1,60 1,12

in .063 .044

B10–B23

v v

B24–B31

B32–B37

B181

PCBN/PCD Inserts

P M K N S H

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v j

v v v v v v

CNM D

Rε

L10

ISO catalog number CNMN090308S02020 CNMN090312S02020

ANSI catalog number CNM322S0820 CNM323S0820

mm 9,53 9,53

in 3/8 3/8

mm 9,67 9,67

in .381 .381

mm 0,8 1,2

in 1/32 3/64

CNMN120408S02020 CNMN120412S02020

CNM432S0820 CNM433S0820

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

0,8 1,2

1/32 3/64

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Kendex™ Negative Inserts

v v v v

RNM D

Rε

L10

ISO catalog number RNMN090300S02020 RNMN120300S02020

ANSI catalog number RNM32S0820 RNM42S0820

mm 9,53 12,70

in 3/8 1/2

mm — —

in — —

mm — —

in — —

RNMN120400S02020

RNM43S0820

12,70

1/2

—

SNM D

B182

Rε

L10

ISO catalog number SNMN090308S02020 SNMN090312S02020

ANSI catalog number SNM322S0820 SNM323S0820

mm 9,53 9,53

in 3/8 3/8

mm 9,53 9,53

in .375 .375

mm 0,8 1,2

in 1/32 3/64

SNMN090316S02020 SNMN120308S02020

SNM324S0820 SNM422S0820

9,53 12,70

3/8 1/2

9,53 12,70

.375 .500

1,6 0,8

1/16 1/32

SNMN120312S02020 SNMN120316S02020

SNM423S0820 SNM424S0820

12,70 12,70

1/2 1/2

12,70 12,70

.500 .500

1,2 1,6

3/64 1/16

SNMN120416T02020

SNM434S0820

12,70

1/2

12,70

.500

1,6

1/16

www.kennametal.com

Superhard Inserts Kendex Negative Dimple Inserts ™

first choice

alternate choice

v v v j v v j

v v v v v v

CNGF ISO catalog number CNGF120408

ANSI catalog number CNGF432

mm 12,70

Rε

L10 in 1/2

mm 12,90

in .508

mm 0,8

in 1/32

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

CNGX D ISO catalog number CNGX120412S01015 CNGX120416S02020

ANSI catalog number CNGX433S0415 CNGX434S0820

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 1,20 1,60

in 3/64 1/16

v v

CNGX-FW D ISO catalog number CNGX120412S01015FW

ANSI catalog number CNGX433S0415FW

mm 12,70

Rε

L10 in 1/2

mm 12,90

in .508

mm 1,2

in 3/64

in 1/16

DNGX D ISO catalog number DNGX150416S02020

ANSI catalog number DNGX434S0820

C2–C70

www.kennametal.com

C72–C118

mm 12,70

Rε

L10 in 1/2

C119–C129

mm 15,50

in .610

C130–C161

mm 1,6

B10–B23

B24–B31

B32–B37

B183

PCBN/PCD Inserts

P M K N S H

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v j

v v v v v v

SNGX D ISO catalog number SNGX120416S02020 SNGX150416S02020

ANSI catalog number SNGX434S0820 SNGX534S0820

mm 12,70 15,88

Rε

L10 in 1/2 5/8

mm 12,70 15,88

in .500 .625

mm 1,6 1,6

in 1/16 1/16

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Kendex™ Negative Dimple Inserts

v v

35˚

VNGX

Rε

L10

D ISO catalog number VNGX160412S02020

ANSI catalog number VNGX333S0820

mm 9,53

Rε

L10 in 3/8

mm 16,61

in .654

mm 1,2

in 3/64

TNGX-FW D ISO catalog number TNGX160412EFW

ANSI catalog number TNGX333EFW

mm 9,53

Rε

L10 in 3/8

mm 16,50

in .650

mm 1,2

Clamp Selection Chart insert

clamp

MM 3960807 3960808

ANSI catalog number CNGX433S0415 CNGX433S0415FW

ISO catalog number CNGX120412S01015 CNGX120412S01015FW

551.718 - 100˚ Corner 551.718 - 100˚ Corner

551.716 - 80˚ Corner 551.716 - 80˚ Corner

3960806 3960811

CNGX434S0820 DNGX434S0820

CNGX120416S02020 DNGX150416S02020

551.718 - 100˚ Corner 551.720

551.716 - 80˚ Corner 551.720

3960812 3960823

SNGX434S0820 SNGX534S0820

SNGX120416S02020 SNGX150416S02020

551.718 551.718

3960824 3876843

VNGX333S0820 CNGF432

VNGX160412S02020 CNGF120408

551.721 551.718 - 100˚ Corner

551.721 551.716 - 80˚ Corner

3960825

TNGX333EFW

TNGX160412EFW

551.733

B184

www.kennametal.com

Superhard Inserts Kendex™ Positive Inserts

first choice

alternate choice

v v v j v v

v v v v v v

CPG

ISO catalog number CPGN120304F CPGN120308F

ANSI catalog number CPG421F CPG422F

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

v v

CPG-MT D ISO catalog number CPGN120304S01015MT CPGN120308S01015MT

ANSI catalog number CPG421S0415MT CPG422S0415MT

mm 12,70 12,70

Rε

L10 in 1/2 1/2

mm 12,90 12,90

in .508 .508

mm 0,4 0,8

in 1/64 1/32

v v

TPG D

Rε

L10

ISO catalog number TPGN110304F TPGN110308F

ANSI catalog number TPG221F TPG222F

mm 6,35 6,35

in 1/4 1/4

mm 11,00 11,00

in .433 .433

mm 0,4 0,8

in 1/64 1/32

TPGN160304F TPGN160308F

TPG321F TPG322F

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

0,4 0,8

1/64 1/32

TPGN160312F TPGN220404F

TPG323F TPG431F

9,53 12,70

3/8 1/2

16,50 22,00

.650 .866

1,2 0,4

3/64 1/64

TPGN220408F

TPG432F

12,70

1/2

22,00

.866

0,8

1/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

v v

B24–B31

B32–B37

B185

PCBN/PCD Inserts

P M K N S H

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v j

v v v v v v

TPG-M D

Rε

L10

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Kendex™ Positive Inserts

ISO catalog number TPGN110304EM TPGN110304S01020M

ANSI catalog number TPG221EM TPG221S0420M

mm 6,35 6,35

in 1/4 1/4

mm 11,00 11,00

in .433 .433

mm 0,4 0,4

in 1/64 1/64

TPGN160304EM TPGN160304S01020M

TPG321EM TPG321S0420M

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

0,4 0,4

1/64 1/64

TPGN160308EM

TPG322EM

9,53

3/8

16,50

.650

0,8

1/32

v v

TPG-MT D

B186

Rε

L10

ISO catalog number TPGN160304S01015MT TPGN160308S01015MT

ANSI catalog number TPG321S0415MT TPG322S0415MT

mm 9,53 9,53

in 3/8 3/8

mm 16,50 16,50

in .650 .650

mm 0,4 0,8

in 1/64 1/32

TPGN220404S01015MT TPGN220408S01015MT

TPG431S0415MT TPG432S0415MT

12,70 12,70

1/2 1/2

22,00 22,00

.866 .866

0,4 0,8

1/64 1/32

v v v v

www.kennametal.com

Superhard Inserts Screw-On Inserts

first choice

alternate choice

v v v j v v

v v v v v v

CCGW-C Rε

L10

ISO catalog number CCGW060202EC CCGW060202S01015C

ANSI catalog number CCGW21505EC CCGW21505S0415C

mm 6,35 6,35

in 1/4 1/4

mm 6,45 6,45

in .254 .254

mm 0,2 0,2

in .008 .008

CCGW060204S01015C CCGW09T304S01015C

CCGW2151S0415C CCGW3251S0415C

6,35 9,53

1/4 3/8

6,45 9,67

.254 .381

0,4 0,4

1/64 1/64

CCGW09T308EC CCGW09T308S01015C

CCGW3252EC CCGW3252S0415C

9,53 9,53

3/8 3/8

9,67 9,67

.381 .381

0,8 0,8

1/32 1/32

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

v v

v v v v

v v v

CCGW-EMT D ISO catalog number CCGW09T304EMT

ANSI catalog number CCGW3251EMT

mm 9,53

Rε

L10 in. 3/8

mm 9,67

in .381

mm 0,4

in 1/64

CCGW-FST D

Rε

L10

ISO catalog number CCGW060204FST CCGW09T304FST

ANSI catalog number CCGW2151FST CCGW3251FST

mm 6,35 9,53

in 1/4 3/8

mm 6,45 9,67

in .254 .381

mm 0,4 0,4

in 1/64 1/64

v v

CCGW09T308FST

CCGW3252FST

9,53

3/8

9,67

.381

0,8

1/32

CCGW-FWC D

Rε

L10

ISO catalog number CCGW060202EFWC CCGW060204EFWC

ANSI catalog number CCGW21505EFWC CCGW2151EFWC

mm 6,35 6,35

in 1/4 1/4

mm 6,45 6,45

in .254 .254

mm 0,2 0,4

in .008 1/64

CCGW09T304EFWC CCGW09T308EFWC

CCGW3251EFWC CCGW3252EFWC

9,53 9,53

3/8 3/8

9,67 9,67

.381 .381

0,4 0,8

1/64 1/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

v v v v

B24–B31

B32–B37

B187

PCBN/PCD Inserts

P M K N S H

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v j

v v v v v v

CCGW-FWM D

Rε

L10

ISO catalog number CCGW060202EFWM CCGW060204EFWM

ANSI catalog number CCGW21505EFWM CCGW2151EFWM

mm 6,35 6,35

in 1/4 1/4

mm 6,45 6,45

in .254 .254

mm 0,2 0,4

in .008 1/64

CCGW09T304EFWM CCGW09T308EFWM

CCGW3251EFWM CCGW3252EFWM

9,53 9,53

3/8 3/8

9,67 9,67

.381 .381

0,4 0,8

1/64 1/32

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Screw-On Inserts

v v v v

CCGW-FWMT D ISO catalog number CCGW09T304S01015FWMT CCGW09T308S01015FWMT

ANSI catalog number CCGW3251S0415FWMT CCGW3252S0415FWMT

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 9,67 9,67

in .381 .381

mm 0,4 0,8

in 1/64 1/32

v v

CCGW-M D

Rε

L10

ISO catalog number CCGW060202EM CCGW060204S01015M

ANSI catalog number CCGW21505EM CCGW2151S0415M

mm 6,35 6,35

in 1/4 1/4

mm 6,45 6,45

in .254 .254

mm 0,2 0,4

in .008 1/64

CCGW09T304S01015M CCGW09T308S01015M

CCGW3251S0415M CCGW3252S0415M

9,53 9,53

3/8 3/8

9,67 9,67

.381 .381

0,4 0,8

1/64 1/32

v v v v

CCGW-MT D

B188

Rε

L10

ISO catalog number CCGW09T304S01015MT CCGW09T308S01015MT

ANSI catalog number CCGW3251S0415MT CCGW3252S0415MT

mm 9,53 9,53

in 3/8 3/8

mm 9,67 9,67

in .381 .381

mm 0,4 0,8

in 1/64 1/32

CCGW120404S01015MT CCGW120408S01015MT

CCGW431S0415MT CCGW432S0415MT

12,70 12,70

1/2 1/2

12,90 12,90

.508 .508

0,4 0,8

1/64 1/32

v v

www.kennametal.com

Superhard Inserts Screw-On Inserts

first choice

alternate choice

v v v j v v

v v v v v v

Rε

L10

ISO catalog number CDHBS4T0S0 CDHBS4T002

ANSI catalog number CDHB120601 CDHB120605

mm 3,97 3,97

in 5/32 5/32

mm 4,03 4,03

in .159 .159

mm 0,1 0,2

in .002 .007

CDHBS4T004

CDHB12061

3,97

5/32

4,03

.159

0,4

.015

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

CDHB

v v v

CDHB-FST D ISO catalog number CDHBS4T004FST CDHBS4T002FST

ANSI catalog number CDHB120601FST CDHB120605FST

mm 3,97 3,97

Rε

L10 in 5/32 5/32

mm 4,03 4,03

in .159 .159

mm 0,1 0,2

in .002 .007

CPGW-E D

Rε

L10

ISO catalog number CPGW060204E CPGW09T304E

ANSI catalog number CPGW2151E CPGW3251E

mm 6,35 9,53

in 1/4 3/8

mm 6,45 9,67

in .254 .381

mm 0,4 0,4

in 1/64 1/64

CPGW09T308E

CPGW3252E

9,53

3/8

9,67

.381

0,8

1/32

CPGW-FWC D ISO catalog number CPGW060202EFWC CPGW060204EFWC

ANSI catalog number CPGW21505EFWC CPGW2151EFWC

C2–C70

www.kennametal.com

mm 6,35 6,35

C72–C118

Rε

L10 in 1/4 1/4

mm 6,45 6,45

C119–C129

in .254 .254

C130–C161

mm 0,2 0,4

in .008 1/64

B10–B23

v v

B24–B31

B32–B37

B189

PCBN/PCD Inserts

P M K N S H

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v

v v v v v v

CPGW-FWM D

Rε

L10

ISO catalog number CPGW060202EFWM CPGW060204EFWM

ANSI catalog number CPGW21505EFWM CPGW2151EFWM

mm 6,35 6,35

in 1/4 1/4

mm 6,45 6,45

in .254 .254

mm 0,2 0,4

in .008 1/64

CPGW060208EFWM

CPGW2152EFWM

6,35

1/4

6,45

.254

0,8

1/32

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Screw-On Inserts

v v v

CPGW-FWMT D ISO catalog number CPGW09T304S01015FWMT CPGW09T308S01015FWMT

ANSI catalog number CPGW3251S0415FWMT CPGW3252S0415FWMT

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 9,67 9,67

in .381 .381

mm 0,4 0,8

in 1/64 1/32

v v

CPGW-FWST D

Rε

L10

ISO catalog number CPGW060204FWST CPGW09T308FWST

ANSI catalog number CPGW2151FWST CPGW3252FWST

mm 6,35 9,53

in 1/4 3/8

mm 6,45 9,67

in .254 .381

mm 0,4 0,8

in 1/64 1/32

CPGW120408FWST

CPGW432FWST

12,70

1/2

12,90

.508

0,8

1/32

v v

CPGW-ST D

B190

Rε

L10

ISO catalog number CPGW060202FST CPGW060204FST

ANSI catalog number CPGW21505FST CPGW2151FST

mm 6,35 6,35

in 1/4 1/4

mm 6,45 6,45

in .254 .254

mm 0,2 0,4

in .008 1/64

CPGW060208FST CPGW09T304FST

CPGW2152FST CPGW3251FST

6,35 9,53

1/4 3/8

6,45 9,67

.254 .381

0,8 0,4

1/32 1/64

v v

CPGW09T308FST CPGW120404FST

CPGW3252FST CPGW431FST

9,53 12,70

3/8 1/2

9,67 12,90

.381 .508

0,8 0,4

1/32 1/64

CPGW120408FST

CPGW432FST

12,70

1/2

12,90

.508

0,8

1/32

www.kennametal.com

Superhard Inserts Screw-On Inserts

first choice

alternate choice

v v v j v v j

v v v v v v

DCGW-C Rε

L10

ISO catalog number DCGW070202EC DCGW070202S01015C

ANSI catalog number DCGW21505EC DCGW21505S0415C

mm 6,35 6,35

in 1/4 1/4

mm 7,75 7,75

in .305 .305

mm 0,2 0,2

in .008 .008

DCGW070204S01015C

DCGW2151S0415C

6,35

1/4

7,75

.305

0,4

1/64

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

v v

v v v

DCGW-FWM D ISO catalog number DCGW070204EFWM

ANSI catalog number DCGW2151EFWM

mm 6,35

Rε

L10 in 1/4

mm 7,75

in .305

mm 0,4

in 1/64

DCGW-FWMT D ISO catalog number DCGW11T304EFWMT DCGW11T308S01015FWMT

ANSI catalog number DCGW3251EFWMT DCGW3252S0415FWMT

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 11,63 11,63

in .458 .458

mm 0,4 0,8

in 1/64 1/32

v v

DCGW-M D

Rε

L10

ISO catalog number DCGW070202EM DCGW070204EM

ANSI catalog number DCGW21505EM DCGW2151EM

mm 6,35 6,35

in 1/4 1/4

mm 7,75 7,75

in .305 .305

mm 0,2 0,4

in .008 1/64

DCGW070204S01015M DCGW11T304S01015M

DCGW2151S0415M DCGW3251S0415M

6,35 9,53

1/4 3/8

7,75 11,63

.305 .458

0,4 0,4

1/64 1/64

v v

DCGW11T308S01015M

DCGW3252S0415M

9,53

3/8

11,63

.458

0,8

1/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

B24–B31

B32–B37

B191

PCBN/PCD Inserts

P M K N S H

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v

v v v v v v

DCGW-MT D ISO catalog number DCGW11T304S01015MT DCGW11T308S01015MT

ANSI catalog number DCGW3251S0415MT DCGW3252S0415MT

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 11,63 11,63

in .458 .458

mm 0,4 0,8

in 1/64 1/32

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Screw-On Inserts

v v

DCGW-ST D ISO catalog number DCGW070204FST DCGW11T304FST

ANSI catalog number DCGW2151FST DCGW3251FST

mm 6,35 9,53

Rε

L10 in 1/4 3/8

mm 7,75 11,63

in .305 .458

in 1/64 1/64

mm 0,4 0,4

DPGW-C D

Rε

L10

ISO catalog number DPGW070202EC DPGW070204S01015C

ANSI catalog number DPGW21505EC DPGW2151S0415C

mm 6,35 6,35

in 1/4 1/4

mm 7,75 7,75

in .305 .305

mm 0,2 0,4

in .008 1/64

DPGW070208S01015C

DPGW2152S0415C

6,35

1/4

7,75

.305

0,8

1/32

DPGW-E D ISO catalog number DPGW070202E DPGW11T304E

ANSI catalog number DPGW21505E DPGW3251E

mm 6,35 9,53

Rε

L10 in 1/4 3/8

mm 7,75 11,63

in .305 .458

mm 0,2 0,4

in .008 1/64

v v

DPGW-EMT D ISO catalog number DPGW11T304EMT

B192

ANSI catalog number DPGW3251EMT

mm 9,53

Rε

L10 in 3/8

mm 11,63

in .458

mm 0,4

in 1/64

www.kennametal.com

Superhard Inserts Screw-On Inserts

first choice

alternate choice

v v v j v v

v v v v v v

DPGW-FST Rε

L10

ISO catalog number DPGW070202FST DPGW070204FST

ANSI catalog number DPGW21505FST DPGW2151FST

mm 6,35 6,35

in 1/4 1/4

mm 7,75 7,75

in .305 .305

mm 0,2 0,4

in .008 1/64

DPGW11T304FST

DPGW3251FST

9,53

3/8

11,63

.458

0,4

1/64

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

DPGW-FWM D ISO catalog number DPGW070204S01015FWM

ANSI catalog number DPGW2151S0415FWM

mm 6,35

Rε

L10 in 1/4

mm 7,75

in .305

mm 0,4

in 1/64

DPGW-FWST D ISO catalog number DPGW070204FWST DPGW11T304FWST

ANSI catalog number DPGW2151FWST DPGW3251FWST

mm 6,35 9,53

Rε

L10 in 1/4 3/8

mm 7,75 11,63

in .305 .458

mm 0,2 0,2

in .007 .007

DPGW-M D

Rε

L10

ISO catalog number DPGW070202EM DPGW070204S01015M

ANSI catalog number DPGW21505EM DPGW2151S0415M

mm 6,35 6,35

in 1/4 1/4

mm 7,75 7,75

in .305 .305

mm 0,2 0,4

in .008 1/64

DPGW070208S01015M DPGW11T304S01015M

DPGW2152S0415M DPGW3251S0415M

6,35 9,53

1/4 3/8

7,75 11,63

.305 .458

0,8 0,4

1/32 1/64

DPGW11T308S01015M

DPGW3252S0415M

9,53

3/8

11,63

.458

0,8

1/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

v v

B24–B31

B32–B37

B193

PCBN/PCD Inserts

P M K N S H

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v

v v v v v v

DPGW-MT D ISO catalog number DPGW11T304S01015MT DPGW11T308S01015MT

ANSI catalog number DPGW3251S0415MT DPGW3252S0415MT

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 11,63 11,63

in .458 .458

mm 0,4 0,8

in 1/64 1/32

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Screw-On Inserts

v v v v v v

TCGW-C D

Rε

L10

ISO catalog number TCGW110202EC TCGW110202S01015C

ANSI catalog number TCGW21505EC TCGW21505S0415C

mm 6,35 6,35

in 1/4 1/4

mm 11,00 11,00

in .433 .433

mm 0,20 0,20

in .008 .008

TCGW110204S01015C

TCGW2151S0415C

6,35

1/4

11,00

.433

0,40

1/64

TCGW-FST D ISO catalog number TCGW110204FST TCGW16T304FST

ANSI catalog number TCGW2151FST TCGW3251FST

mm 6,35 9,53

Rε

L10 in 1/4 3/8

mm 11,00 16,50

in .433 .650

mm 0,40 0,40

in 1/64 1/64

TCGW-M D

B194

Rε

L10

ISO catalog number TCGW110202EM TCGW110204S01015M

ANSI catalog number TCGW21505EM TCGW2151S0415M

mm 6,35 6,35

in 1/4 1/4

mm 11,00 11,00

in .433 .433

mm 0,2 0,4

in .008 1/64

TCGW16T304S01015M TCGW16T308S01015M

TCGW3251S0415M TCGW3252S0415M

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

0,4 0,8

1/64 1/32

v v v v

www.kennametal.com

Superhard Inserts Screw-On Inserts

first choice

alternate choice

v v v j v v j

v v v v v v

D ISO catalog number TCGW16T304S01015MT

ANSI catalog number TCGW3251S0415MT

mm 9,53

Rε

L10 in 3/8

mm 16,50

in .650

mm 0,4

in 1/64

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

TCGW-MT

TDHB D ISO catalog number TDHB07T1202

ANSI catalog number TDHB12807505

mm 4,06

Rε

L10 in .160

mm 7,04

in .277

mm 0,2

in .007

TPGW D ISO catalog number TPGW110208E

ANSI catalog number TPGW2152E

mm 6,35

Rε

L10 in 1/4

mm 11,00

in .433

mm 0,80

in 1/32

TPGW-C D

Rε

L10

ISO catalog number TPGW110202EC TPGW110204EC

ANSI catalog number TPGW21505EC TPGW2151EC

mm 6,35 6,35

in 1/4 1/4

mm 11,00 11,00

in .433 .433

mm 0,20 0,40

in .008 1/64

TPGW110204S01015C TPGW110208S01015C

TPGW2151S0415C TPGW2152S0415C

6,35 6,35

1/4 1/4

11,00 11,00

.433 .433

0,40 0,80

1/64 1/32

C2–C70

www.kennametal.com

C72–C118

C119–C129

C130–C161

B10–B23

v v

B24–B31

v v v v

B32–B37

B195

PCBN/PCD Inserts

P M K N S H

Superhard Inserts

first choice

alternate choice

P M K N S H

v v v j v v

v v v v v v

TPGW-FST D

Rε

L10

ISO catalog number TPGW110204FST TPGW110208FST

ANSI catalog number TPGW2151FST TPGW2152FST

mm 6,35 6,35

in 1/4 1/4

mm 11,00 11,00

in .433 .433

mm 0,4 0,8

in 1/64 1/32

TPGW16T304FST TPGW16T308FST

TPGW3251FST TPGW3252FST

9,53 9,53

3/8 3/8

16,50 16,50

.650 .650

0,4 0,8

1/64 1/32

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

PCBN/PCD Inserts

Screw-On Inserts

v v

TPGW-M D

Rε

L10

ISO catalog number TPGW110202EM TPGW110204S01015M

ANSI catalog number TPGW21505EM TPGW2151S0415M

mm 6,35 6,35

in 1/4 1/4

mm 11,00 11,00

in .433 .433

mm 0,2 0,4

in .008 1/64

TPGW110208S01015M TPGW16T304S01015M

TPGW2152S0415M TPGW3251S0415M

6,35 9,53

1/4 3/8

11,00 16,50

.433 .650

0,8 0,4

1/32 1/64

TPGW16T308S01015M

TPGW3252S0415M

9,53

3/8

16,50

.650

0,8

1/32

v v

TPGW-MT D ISO catalog number TPGW16T308S01015MT

ANSI catalog number TPGW3252S0415MT

mm 9,53

Rε

L10 in 3/8

mm 16,50

in .650

mm 0,8

in 1/32

VBGW-E D ISO catalog number VBGW160408E

B196

ANSI catalog number VBGW332E

mm 9,53

Rε

L10 in 3/8

mm 16,61

in .654

mm 0,8

in 1/32

www.kennametal.com

Superhard Inserts Screw-On Inserts

first choice

alternate choice

v v v j v v

v v v v v v

D ISO catalog number VBGW110304FST VBGW160404FST

ANSI catalog number VBGW221FST VBGW331FST

mm 6,35 9,53

Rε

L10 in 1/4 3/8

mm 11,07 16,61

in .436 .654

mm 0,4 0,4

in 1/64 1/64

KB1340 KB1345 KD1400 KD1405 KD1425 KB1610 KB1625 KB1630 KB5610 KB5625 KB5630

VBGW-FST

VBGW-M D ISO catalog number VBGW160404S01015M VBGW160408S01015M

ANSI catalog number VBGW331S0415M VBGW332S0415M

mm 9,53 9,53

Rε

L10 in 3/8 3/8

mm 16,61 16,61

in .654 .654

mm 0,4 0,8

in 1/64 1/32

v v

VBGW-MT D ISO catalog number VBGW160404S01015MT VBGW160408S01015MT

ANSI catalog number VBGW331S0415MT VBGW332S0415MT

C2–C70

www.kennametal.com

C72–C118

mm 9,53 9,53

Rε

L10 in 3/8 3/8

C119–C129

mm 16,61 16,61

in .654 .654

C130–C161

mm 0,4 0,8

in 1/64 1/32

B10–B23

B24–B31

v v

B32–B37

B197

PCBN/PCD Inserts

P M K N S H

Toolholders, Boring Bars, and Cartridges Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C2–C70 Toolholder Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C2–C3 Kenclamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C6–C14 Kenloc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C15–C33 Wedgelock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C34–C35 Top Notch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C36–C37 Kendex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C38–C49 Screw-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C50–C67 V-Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C68–C69 Positive Profiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C70 Boring Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C72–C129 Boring Bar Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C72–C73 Kenclamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C76–C79 Kenloc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C80–C86 Top Notch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C87 Kendex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C88–C93 Screw-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C94–C118 Boring Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C119–C129 Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C130–C161 Kenloc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C134–C143 Kendex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C144–C148 Screw-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C149–C161

www.kennametal.com

insert shape

plunging chamfering

tool path

profiling facing

page(s)

clamping style

turning

plunging chamfering

clamping style

insert shape

profiling facing

tool path

turning

Toolholder Selection Guide

Kenloc

C17, C32

Kenclamp

Screw-On

C53–C54

TNT

C36

Kenloc

C32

Kenclamp

C14

page(s)

-5° Lead Angle

0° Lead Angle C

Kenloc

™

Screw-On

C15

C50–C52

Screw-On

C56

W V

Screw-On

C64

Screw-On

C66

C25–C26, C28

TNT

C37

Wedgelock™

C35

Kenloc

Kenclamp

C11–C12

C42–C43 C46–C49

15° and -15° Lead Angle Kendex

™

Screw-On

Kenloc

C20

C16, C19

Kenclamp

C6–C7

Kendex

Screw-On

TNT

Kenloc

C23

C38 v

C55–C56 –

Screw-On

C57–C58

Kenclamp

C10

TNT

—

Kendex

C40–C41, C44–C45

Kenloc

C30–C31

Kenclamp

C13

Screw-On

C64–C66

Screw-On

C59

Kenloc

C28–C29

Kenclamp

C12–C13

Screw-On

C63

Kenloc

C30

C42, C46

Kendex

Wedgelock

Kenloc

C21

Kenclamp

TNT

–

Screw-On

–

Kenloc

C31

Kenclamp

C14

C34

17.5° and -17.5° Lead Angle

Wedgelock

Kenclamp

-15° lead angle

C61–C63

-3° Lead Angle D

Kenloc

C35

V -17.5° lead angle

www.kennametal.com

insert shape

plunging chamfering

tool path

profiling facing

page(s)

clamping style

turning

plunging chamfering

clamping style

insert shape

profiling facing

tool path

turning

Toolholder Selection Guide

Kenloc

C22, C24

Kenclamp

C10–C11

Kendex

C40–C41, C44–C45

TNT

C36

Kenloc

C16

Kendex

–

Kenloc

C22

Kenclamp

Kendex

C39

Screw-On

C59–C61

V-Bottom

C68–C69

page(s)

45° Lead Angle

27.5° Lead Angle D

Kenclamp™

C58

Screw-On

C21

Kenloc™

30° Lead Angle T

Kenloc ™

Kendex

Wedgelock™

C26

C49

C34

50° Lead Angle C

40° Lead Angle C

Kenloc

C18

Screw-On

C45

117.5° Lead Angle V

Kenclamp

C13

Clamping Styles Kenclamp Style

Kenloc Style

• Suitable for Kenloc inserts. • Unique clamp design provides rigid clamping. • Ensures insert repeatability and seating. • Reduced chatter and improved tool life.

• Suitable for Kenloc inserts. • Lock pin and top clamp provide rigid clamping. • Wide variety of insert styles may be used. • Tools may be used with or without clamp.

Top Notch™ Turning Style • Proven superior system in holding ceramic inserts rigidly in turning and profiling operations. • Uses standard insert sizes — 80°, 75°, 55°, square, and trigon. • This system offers the added versatility of using optional hardware to hold standard Kendex and Kenloc inserts.

Kendex Style • Suitable for Kendex inserts. • Chipbreaker option available for ceramic inserts. • Wide variety of insert styles may be used.

Wedgelock Style Screw-On Style

• Top and hole clamping for inserts with hole.

• Top clamping by screw for Screw-On inserts.

www.kennametal.com

Toolholders Catalog Numbering System

O.D./I.D. Tooling

MCLNR164D

Insert Holding Method

Insert Shape

Tool Style or Lead Angle

Insert Clearance Angle

Hand of Tool

R = Right hand

E Top Notch Profiling

S = Single pocket locating wall

N = Neutral

C = Deep pocket for ceramic insert

L = Left hand

B Kendex™

Additional Information

F = Straight shank, no offset

™

H D

K L

Kenclamp™

M O P Kenloc™

O A

O B

O C

O D

R 15°

S T Screw-On

, ,

V ,

www.kennametal.com

Toolholders Catalog Numbering System

By referencing this easy-to-use guide, you can identify the correct product to meet your needs.

Shank Dimensions

Insert Size

Qualified Surface and Length

Additional Information

R = Radial clearance for 4" minimum bore

Insert IC Number of 1/8ths if “D”

Insert Thickness (optional) 3 = .188" 4 = .250"

S = 3.00 minimum bore KC = Kenclamp™ H4 = Wedgelock™ clamping system The 7th and 8th position shall be a significant two-digit number that indicates the holder cross section. For shanks 5/8" square and over, the number will represent the number of sixteenths of width and height. For shanks under 5/8" square, the number of sixteenths of cross section will be preceded by a zero. For rectangular holders, the first digit represents the number of eighths of width “B”and the second digit the number of quarters of height “H”, except for a toolholder 1-1/4" x 1-1/2" which is given the number 91.

M.. = TNT/MTS clamping system for ceramic and PCBN inserts

Qualified Surface and Length A = B = C = D = E = F = G* = H* = I* = J* = K* = L* = M = N = P = R = S = T = U* = V* = W* = Y* = Z* =

Qualified back and end, 4" long Qualified back and end, 4.5" long Qualified back and end, 5" long Qualified back and end, 6" long Qualified back and end, 7" long Qualified back and end, 8" long Qualified back and end, 5.5" long Qualified back and end, 5.625" long Qualified back and end, 3" long Qualified back and end, 5.3" long Qualified back and end, 14" long Qualified back and end, 6.8" long Qualified front and end, 4" long Qualified front and end, 4.5" long Qualified front and end, 5" long Qualified front and end, 6" long Qualified front and end, 7" long Qualified front and end, 8" long Qualified front and end, 5.5" long Qualified back and end, 3.5" long Qualified front and end, 3.5" long Qualified back and end, 3.75" long Qualified back and end, 3.250" long

*Kennametal standard only.

www.kennametal.com

O.D./I.D. Tooling

MCLNR164D

Kenclamp™ Toolholders Kenloc™ Inserts

See page B40–B44 for inserts.

O.D./I.D. Tooling

DCKN-KC 15°

catalog number right hand DCKNR124BKC3

.75

L2 L1A B3

gage insert

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

.75 1.000 4.50 1.25 .122 .22

CN..432

ICSN433

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DCKNR164CKC3 DCKNR164DKC3

1.00 1.00 1.250 5.00 1.25 .122 — 1.00 1.00 1.250 6.00 1.25 .122 —

CN..432 CN..432

ICSN443 ICSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCKNR204DKC3 DCKNR205DKC4

1.25 1.25 1.500 6.00 1.25 .122 — 1.25 1.25 1.500 6.00 1.25 .150 —

CN..432 CN..543

ICSN443 ICSN543

KMSP415IP KMSP515IP

15 IP 15 IP

CM234R ASSY CM209R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCKNR206DKC4 left hand

1.25 1.25 1.500 6.00 1.50 .183 —

CN..643

ICSN643

KMSP625IP

25 IP

CM210R ASSY

25 IP

SSP025016M

DCKNL164DKC3 DCKNL204DKC3

1.00 1.00 1.250 6.00 1.25 .122 — 1.25 1.25 1.500 6.00 1.25 .122 —

CN..432 CN..432

ICSN443 ICSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCKNL205DKC4

1.25 1.25 1.500 6.00 1.25 .150 —

CN..543

ICSN543

KMSP515IP

15 IP

CM209R ASSY

15 IP

SSP025016M

See page B40–B44 for inserts.

DCLN-KC -5°

catalog number right hand DCLNR123BKC3

.75

L2 B3

gage insert

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

.75 1.000 4.50 1.12 .06

CN..332

ICSN322

KMSP315IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DCLNR163DKC3 DCLNR124BKC3

1.00 1.00 1.250 6.00 1.12 — .75 .75 1.000 4.50 1.25 .15

CN..332 CN..432

ICSN322 ICSN433

KMSP315IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCLNR164CKC3 DCLNR164DKC3

1.00 1.00 1.250 5.00 1.25 — 1.00 1.00 1.250 6.00 1.25 —

CN..432 CN..432

ICSN443 ICSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCLNR204DKC3 DCLNR244DKC3

1.25 1.25 1.500 6.00 1.25 — 1.50 1.50 2.000 6.00 1.25 —

CN..432 CN..432

ICSN443 ICSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCLNR165CKC4 DCLNR165DKC4

1.00 1.00 1.250 5.00 1.38 — 1.00 1.00 1.250 6.00 1.38 —

CN..543 CN..543

ICSN543 ICSN543

KMSP515IP KMSP515IP

15 IP 15 IP

CM209R ASSY CM209R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCLNR205DKC4 DCLNR245DKC4

1.25 1.25 1.500 6.00 1.38 — 1.50 1.50 2.000 6.00 1.38 —

CN..543 CN..543

ICSN543 ICSN543

KMSP515IP KMSP515IP

15 IP 15 IP

CM209R ASSY CM209R ASSY

15 IP 15 IP

SSP025016M SSP025016M (continued)

www.kennametal.com

Kenclamp™ Toolholders Kenloc™ Inserts

catalog number DCLNR166DKC4 DCLNR206DKC4

H B F L1 L2 B3 1.00 1.00 1.250 6.00 1.62 — 1.25 1.25 1.500 6.00 1.62 —

gage insert CN..643 CN..643

shim ICSN633 ICSN643

shim screw KMSP625IP KMSP625IP

Torx Plus 25 IP 25 IP

clamp assembly CM210R ASSY CM210R ASSY

Torx Plus 25 IP 25 IP

slotted pin SSP025016M SSP025016M

DCLNR246DKC4 DCLNR246EKC4

1.50 1.50 2.000 6.00 1.62 — 1.50 1.50 2.000 7.00 1.62 —

CN..643 CN..643

ICSN643 ICSN643

KMSP625IP KMSP625IP

25 IP 25 IP

CM210R ASSY CM210R ASSY

25 IP 25 IP

SSP025016M SSP025016M

left hand DCLNL123BKC3

.75 1.000 4.50 1.12 .06

CN..332

ICSN322

KMSP315IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DCLNL163DKC3 DCLNL124BKC3

1.00 1.00 1.250 6.00 1.12 — .75 .75 1.000 4.50 1.25 .15

.75

CN..332 CN..432

ICSN322 ICSN433

KMSP315IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCLNL164CKC3 DCLNL164DKC3

1.00 1.00 1.250 5.00 1.25 — 1.00 1.00 1.250 6.00 1.25 —

CN..432 CN..432

ICSN443 ICSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCLNL854DKC3 DCLNL204DKC3

1.25 1.00 1.250 6.00 1.25 — 1.25 1.25 1.500 6.00 1.25 —

CN..432 CN..432

ICSN443 ICSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCLNL244DKC3 DCLNL165CKC4

1.50 1.50 2.000 6.00 1.25 — 1.00 1.00 1.250 5.00 1.38 —

CN..432 CN..543

ICSN443 ICSN543

KMSP415IP KMSP515IP

15 IP 15 IP

CM234R ASSY CM209R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCLNL165DKC4 DCLNL205DKC4

1.00 1.00 1.250 6.00 1.38 — 1.25 1.25 1.500 6.00 1.38 —

CN..543 CN..543

ICSN543 ICSN543

KMSP515IP KMSP515IP

15 IP 15 IP

CM209R ASSY CM209R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCLNL245DKC4 DCLNL166DKC4

1.50 1.50 2.000 6.00 1.38 — 1.00 1.00 1.250 6.00 1.62 —

CN..543 CN..643

ICSN543 ICSN633

KMSP515IP KMSP625IP

15 IP 25 IP

CM209R ASSY CM210R ASSY

15 IP 25 IP

SSP025016M SSP025016M

DCLNL206DKC4 DCLNL246DKC4

1.25 1.25 1.500 6.00 1.62 — 1.50 1.50 2.000 6.00 1.62 —

CN..643 CN..643

ICSN643 ICSN643

KMSP625IP KMSP625IP

25 IP 25 IP

CM210R ASSY CM210R ASSY

25 IP 25 IP

SSP025016M SSP025016M

gage insert

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

See page B40–B44 for inserts.

DCRN-KC 15°

catalog number right hand DCRNR124BKC3

.75

L2 FA

.878 4.50 1.25 .12

CN..432

ICSN433

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DCRNR164DKC3 DCRNR204DKC3

1.00 1.00 1.128 6.00 1.25 .12 1.25 1.25 1.378 6.00 1.25 .12

CN..432 CN..432

ICSN443 ICSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCRNR245DKC4 DCRNR206DKC4

1.50 1.50 1.851 6.00 1.38 .15 1.25 1.25 1.501 6.00 1.38 .18

CN..543 CN..643

ICSN543 ICSN643

KMSP515IP KMSP625IP

15 IP 25 IP

CM209R ASSY CM210R ASSY

15 IP 25 IP

SSP025016M SSP025016M

left hand DCRNL164DKC3

1.00 1.00 1.128 6.00 1.25 .12

CN..432

ICSN443

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DCRNL204DKC3 DCRNL245DKC4

1.25 1.25 1.378 6.00 1.25 .12 1.50 1.50 1.851 6.00 1.38 .15

CN..432 CN..543

ICSN443 ICSN543

KMSP415IP KMSP515IP

15 IP 15 IP

CM234R ASSY CM209R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DCRNL206DKC4

1.25 1.25 1.501 6.00 1.38 .18

CN..643

ICSN643

KMSP625IP

25 IP

CM210R ASSY

25 IP

SSP025016M

www.kennametal.com

O.D./I.D. Tooling

(DCLN-KC -5° continued)

Kenclamp™ Toolholders Kenloc™ Inserts

See page B50–B57 for inserts.

O.D./I.D. Tooling

DDJN-KC -3°

catalog number right hand DDJNR123BKC3

.75

L2 B3

gage insert

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

.75 1.000 4.50 1.25 .06

DN..332

IDSN322

KMSP315IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DDJNR163CKC3 DDJNR163DKC3

1.00 1.00 1.250 5.00 1.25 — 1.00 1.00 1.250 6.00 1.25 —

DN..332 DN..332

IDSN322 IDSN322

KMSP315IP KMSP315IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DDJNR203DKC3 DDJNR164CKC3

1.25 1.25 1.500 6.00 1.25 — 1.00 1.00 1.250 5.00 1.25 —

DN..332 DN..432

IDSN322 IDSN443

KMSP315IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DDJNR164DKC3 DDJNR204DKC3

1.00 1.00 1.250 6.00 1.25 — 1.25 1.25 1.500 6.00 1.25 —

DN..432 DN..432

IDSN443 IDSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DDJNR165DKC4 DDJNR205DKC4

1.00 1.00 1.250 6.00 1.38 .15 1.25 1.25 1.500 6.00 1.38 —

DN..543 DN..543

IDSN543 IDSN543

KMSP515IP KMSP515IP

15 IP 15 IP

CM209R ASSY CM209R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DDJNR245DKC4 left hand

1.50 1.50 2.000 6.00 1.38 —

DN..543

IDSN543

KMSP515IP

15 IP

CM209R ASSY

15 IP

SSP025016M

DDJNL123BKC3 DDJNL163CKC3

.75 .75 1.000 4.50 1.25 .06 1.00 1.00 1.250 5.00 1.25 —

DN..332 DN..332

IDSN322 IDSN322

KMSP315IP KMSP315IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DDJNL163DKC3 DDJNL203DKC3

1.00 1.00 1.250 6.00 1.25 — 1.25 1.25 1.500 6.00 1.25 —

DN..332 DN..332

IDSN322 IDSN322

KMSP315IP KMSP315IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DDJNL164CKC3 DDJNL164DKC3

1.00 1.00 1.250 5.00 1.25 — 1.00 1.00 1.250 6.00 1.25 —

DN..432 DN..432

IDSN443 IDSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DDJNL204DKC3 DDJNL165DKC4

1.25 1.25 1.500 6.00 1.25 — 1.00 1.00 1.250 6.00 1.38 .15

DN..432 DN..543

IDSN443 IDSN543

KMSP415IP KMSP515IP

15 IP 15 IP

CM234R ASSY CM209R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DDJNL205DKC4 DDJNL245DKC4

1.25 1.25 1.500 6.00 1.38 — 1.50 1.50 2.000 6.00 1.38 —

DN..543 DN..543

IDSN543 IDSN543

KMSP515IP KMSP515IP

15 IP 15 IP

CM209R ASSY CM209R ASSY

15 IP 15 IP

SSP025016M SSP025016M

See page B50–B57 for inserts.

DDPN-KC 27.5°

catalog number DDPNN164DKC3

H B F L1 L2 1.00 1.00 .500 6.00 1.62

gage insert DN..432

shim IDSN443

shim screw KMSP415IP

Torx Plus 15 IP

clamp assembly CM234R ASSY

Torx Plus 15 IP

slotted pin SSP025016M

www.kennametal.com

Kenclamp™ Toolholders Kenloc™ Inserts

See page B50–B57 for inserts.

catalog number right hand DDQNR164CKC3 DDQNR164DKC3 DDQNR204DKC3 left hand DDQNL164CKC3 DDQNL164DKC3 DDQNL204DKC3

gage insert

shim

shim screw

Torx Plus

1.00 1.00 1.250 5.00 1.38

DN..432

IDSN443

KMSP415IP

1.00 1.00 1.250 6.00 1.38 1.25 1.25 1.500 6.00 1.38

DN..432 DN..432

IDSN443 IDSN443

KMSP415IP KMSP415IP

1.00 1.00 1.250 5.00 1.38

DN..432

IDSN443

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

1.00 1.00 1.250 6.00 1.38 1.25 1.25 1.500 6.00 1.38

DN..432 DN..432

IDSN443 IDSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

clamp assembly

Torx Plus

slotted pin

clamp assembly

Torx Plus

slotted pin

15 IP

CM234R ASSY

15 IP

SSP025016M

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

See page B58 for inserts.

DRGN-KC

catalog number right hand DRGNR124BKC3

.75

gage insert

shim

shim screw

Torx Plus

.75 1.000 4.50 1.25

RN..43

IRSN43

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DRGNR164DKC3 DRGNR204DKC3

1.00 1.00 1.250 6.00 1.25 1.25 1.25 1.500 6.00 1.25

RN..43 RN..43

IRSN44 IRSN44

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DRGNR165DKC4 DRGNR206DKC4

1.00 1.00 1.250 6.00 1.25 1.25 1.25 1.500 6.00 1.38

RN..54 RN..64

IRSN54 IRSN64

KMSP515IP KMSP625IP

15 IP 25 IP

CM209R ASSY CM210R ASSY

15 IP 25 IP

SSP025016M SSP025016M

left hand DRGNL124BKC3

.75 1.000 4.50 1.25

RN..43

IRSN43

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DRGNL164DKC3 DRGNL204DKC3

1.00 1.00 1.250 6.00 1.25 1.25 1.25 1.500 6.00 1.25

.75

RN..43 RN..43

IRSN44 IRSN44

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DRGNL165DKC4 DRGNL206DKC4

1.00 1.00 1.250 6.00 1.25 1.25 1.25 1.500 6.00 1.38

RN..54 RN..64

IRSN54 IRSN64

KMSP515IP KMSP625IP

15 IP 25 IP

CM209R ASSY CM210R ASSY

15 IP 25 IP

SSP025016M SSP025016M

www.kennametal.com

O.D./I.D. Tooling

DDQN-KC -17.5°

Kenclamp™ Toolholders Kenloc™ Inserts

See pages B59–B65 for inserts.

O.D./I.D. Tooling

DSDN-KC 45°

catalog number DSDNN124KC3 DSDNN164KC3

H B F L1 L2 .75 .75 .365 4.50 1.44 1.00 1.00 .500 6.00 1.44

gage insert SN..432 SN..432

shim ISSN433 ISSN443

shim screw KMSP415IP KMSP415IP

Torx Plus 15 IP 15 IP

clamp assembly CM234R ASSY CM234R ASSY

Torx Plus 15 IP 15 IP

slotted pin SSP025016M SSP025016M

DSDNN204KC3 DSDNN206KC4

1.25 1.25 .625 6.00 1.44 1.25 1.25 .625 6.00 1.75

SN..432 SN..643

ISSN443 ISSN643

KMSP415IP KMSP625IP

15 IP 25 IP

CM234R ASSY CM210R ASSY

15 IP 25 IP

SSP025016M SSP025016M

See pages B59–B65 for inserts.

DSKN-KC 15°

catalog number right hand DSKNR164CKC3

L2 L1A B3

gage insert

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

1.00 1.00 1.250 5.00 1.25 .12 .12

SN..432

ISSN443

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DSKNR164DKC3 left hand

1.00 1.00 1.250 6.00 1.25 .12 .12

SN..432

ISSN443

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DSKNL164CKC3 DSKNL164DKC3

1.00 1.00 1.250 5.00 1.25 .12 .12 1.00 1.00 1.250 6.00 1.25 .12 .12

SN..432 SN..432

ISSN443 ISSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

See pages B59–B65 for inserts.

DSRN-KC 15°

catalog number right hand DSRNR124BKC3

.75

L2 FA

gage insert

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

.880 4.50 1.25 .12

SN..432

ISSN433

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DSRNR164CKC3 DSRNR164DKC3

1.00 1.00 1.130 5.00 1.25 .12 1.00 1.00 1.130 6.00 1.25 .12

SN..432 SN..432

ISSN443 ISSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DSRNR204DKC3 DSRNR206DKC4

1.25 1.25 1.380 6.00 1.25 .12 1.25 1.25 1.321 6.00 1.50 .18

SN..432 SN..643

ISSN443 ISSN643

KMSP415IP KMSP625IP

15 IP 25 IP

CM234R ASSY CM210R ASSY

15 IP 25 IP

SSP025016M SSP025016M (continued)

C10

www.kennametal.com

Kenclamp™ Toolholders Kenloc™ Inserts (DSRN-KC 15° continued)

.75

gage insert

L2 FA

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

.880 4.50 1.25 .12

SN..432

ISSN433

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DSRNL164CKC3 DSRNL164DKC3

1.00 1.00 1.130 5.00 1.25 .12 1.00 1.00 1.130 6.00 1.25 .12

SN..432 SN..432

ISSN443 ISSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DSRNL204DKC3 DSRNL165DKC4

1.25 1.25 1.380 6.00 1.25 .12 1.00 1.00 1.103 6.00 1.50 .15

SN..432 SN..543

ISSN443 ISSN543

KMSP415IP KMSP515IP

15 IP 15 IP

CM234R ASSY CM209R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DSRNL206DKC4

1.25 1.25 1.321 6.00 1.50 .18

SN..643

ISSN643

KMSP625IP

25 IP

CM210R ASSY

25 IP

SSP025016M

See pages B59–B65 for inserts.

DSSN-KC 45°

catalog number right hand DSSNR164DKC3 left hand DSSNL164DKC3

gage insert

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

1.00 1.00 .912 6.00 1.50 .34 .33

SN..432

ISSN443

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

1.00 1.00 .912 6.00 1.50 .34 .33

SN..432

ISSN443

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

L2 FA L1A

See pages B66–B74 for inserts.

DTFN-KC 0°

catalog number right hand DTFNR123BKC3

.75

gage insert

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

.75 1.000 4.50 1.3

TN..332

ITSN323

KMSP315IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DTFNR163DKC3 DTFNR164CKC3

1.00 1.00 1.250 6.00 1.3 1.00 1.00 1.250 5.00 1.4

TN..332 TN..432

ITSN323 ITSN443

KMSP315IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DTFNR164DKC3 left hand

1.00 1.00 1.250 6.00 1.4

TN..432

ITSN443

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DTFNL123BKC3 DTFNL163DKC3

.75 .75 1.000 4.50 1.3 1.00 1.00 1.250 6.00 1.3

TN..332 TN..332

ITSN323 ITSN323

KMSP315IP KMSP315IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DTFNL164CKC3 DTFNL164DKC3

1.00 1.00 1.250 5.00 1.4 1.00 1.00 1.250 6.00 1.4

TN..432 TN..432

ITSN443 ITSN443

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

www.kennametal.com

C11

O.D./I.D. Tooling

catalog number left hand DSRNL124BKC3

Kenclamp™ Toolholders Kenloc™ Inserts

See pages B66–B74 for inserts.

O.D./I.D. Tooling

DTGN-KC 0°

catalog number right hand DTGNR123BKC3 DTGNR163DKC3 DTGNR164DKC3 left hand DTGNL123BKC3 DTGNL163DKC3 DTGNL164DKC3

.75

.75 1.000 4.50 1.12 .25

TN..332

1.00 1.00 1.250 6.00 1.12 — 1.00 1.00 1.250 6.00 1.25 .09

TN..332 TN..432

.75

L2 B3

gage insert

shim screw

Torx Plus

ITSN323

KMSP315IP

15 IP

CM234R ASSY

15 IP

SSP025016M

ITSN323 ITSN443

KMSP315IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

shim

clamp assembly

Torx Plus

slotted pin

.75 1.000 4.50 1.12 .25

TN..332

ITSN323

KMSP315IP

15 IP

CM234R ASSY

15 IP

SSP025016M

1.00 1.00 1.250 6.00 1.12 — 1.00 1.00 1.250 6.00 1.25 .09

TN..332 TN..432

ITSN323 ITSN443

KMSP315IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

gage insert

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

TN..432

ITSN443

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

See pages B66–B74 for inserts.

DTJN-KC -3°

catalog number right hand DTJNR164DKC3

C12

1.00 1.00 1.250 6.00 1.25 .12

www.kennametal.com

Kenclamp™ Toolholders Kenloc™ Inserts

F 3°

See pages B74–B78 for inserts.

93° L2 L1

catalog number right hand DVJNR123CKC3

.75

gage insert

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

.75 1.000 5.00 1.82

VN..332

IVSN322

KMSP315IP

15 IP

CM215R ASSY

15 IP

SSP025016M

DVJNR163DKC3 DVJNR853DKC3

1.00 1.00 1.250 6.00 1.82 1.25 1.00 1.250 6.00 1.82

VN..332 VN..332

IVSN322 IVSN322

KMSP315IP KMSP315IP

15 IP 15 IP

CM215R ASSY CM215R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DVJNR164DKC3 DVJNR854DKC3

1.00 1.00 1.250 6.00 2.00 1.25 1.00 1.250 6.00 2.00

VN..432 VN..432

IVSN432 IVSN432

KMSP415IP KMSP415IP

15 IP 15 IP

CM235R ASSY CM235R ASSY

15 IP 15 IP

SSP025016M SSP025016M

left hand DVJNL123CKC3

.75 1.000 5.00 1.82

VN..332

IVSN322

KMSP315IP

15 IP

CM215R ASSY

15 IP

SSP025016M

DVJNL163DKC3 DVJNL853DKC3

1.00 1.00 1.250 6.00 1.82 1.25 1.00 1.250 6.00 1.82

.75

VN..332 VN..332

IVSN322 IVSN322

KMSP315IP KMSP315IP

15 IP 15 IP

CM215R ASSY CM215R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DVJNL164DKC3 DVJNL854DKC3

1.00 1.00 1.250 6.00 2.00 1.25 1.00 1.250 6.00 2.00

VN..432 VN..432

IVSN432 IVSN432

KMSP415IP KMSP415IP

15 IP 15 IP

CM235R ASSY CM235R ASSY

15 IP 15 IP

SSP025016M SSP025016M

Torx Plus

slotted pin

F 117,5°

See pages B74–B78 for inserts.

27,5°

L2 L1

DVON-KC -117.5°

catalog number right hand DVONR123CKC3 DVONR163DKC3 DVONR853DKC3 left hand DVONL123CKC3 DVONL163DKC3 DVONL853DKC3

.75

.75 1.000 5.00 1.50 .25

VN..332

1.00 1.00 1.250 6.00 1.47 — 1.25 1.00 1.250 6.00 1.47 —

VN..332 VN..332

.75

L2 B3

gage insert

shim screw

Torx Plus

IVSN322

KMSP315IP

15 IP

CM215R ASSY

15 IP

SSP025016M

IVSN322 IVSN322

KMSP315IP KMSP315IP

15 IP 15 IP

CM215R ASSY CM215R ASSY

15 IP 15 IP

SSP025016M SSP025016M

shim

clamp assembly

.75 1.000 5.00 1.50 .25

VN..332

IVSN322

KMSP315IP

15 IP

CM215R ASSY

15 IP

SSP025016M

1.00 1.00 1.250 6.00 1.47 — 1.25 1.00 1.250 6.00 1.47 —

VN..332 VN..332

IVSN322 IVSN322

KMSP315IP KMSP315IP

15 IP 15 IP

CM215R ASSY CM215R ASSY

15 IP 15 IP

SSP025016M SSP025016M

www.kennametal.com

C13

O.D./I.D. Tooling

DVJN-KC -3°

Kenclamp™ Toolholders Kenloc™ Inserts

F 17,5°

B 72,5° L2

See pages B74–B78 for inserts.

O.D./I.D. Tooling

DVVN-KC 17.5°

catalog number DVVNN123CKC3 DVVNN163DKC3

H B F L1 L2 .75 .75 .371 5.00 1.94 1.00 1.00 .496 6.00 1.97

gage insert VN..332 VN..332

shim IVSN322 IVSN322

shim screw KMSP315IP KMSP315IP

Torx Plus 15 IP 15 IP

clamp assembly CM215R ASSY CM215R ASSY

Torx Plus 15 IP 15 IP

slotted pin SSP025016M SSP025016M

DVVNN853DKC3 DVVNN164DKC3

1.25 1.00 .496 6.00 1.88 1.00 1.00 .496 6.00 2.28

VN..332 VN..432

IVSN322 IVSN432

KMSP315IP KMSP415IP

15 IP 15 IP

CM215R ASSY CM235R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DVVNN854DKC3

1.25 1.00 .496 6.00 2.28

VN..432

IVSN432

KMSP415IP

15 IP

CM235R ASSY

15 IP

SSP025016M

See pages B79–B83 for inserts.

DWLN-KC -5°

catalog number right hand DWLNR123BKC3

C14

.75

L2 B3

gage insert

shim

shim screw

Torx Plus

clamp assembly

Torx Plus

slotted pin

.75 1.000 4.50 1.00 .28

WN..332

IWSN322

KMSP315IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DWLNR163CKC3 DWLNR163DKC3

1.00 1.00 1.250 5.00 1.00 .06 1.00 1.00 1.250 6.00 1.00 .06

WN..332 WN..332

IWSN322 IWSN322

KMSP315IP KMSP315IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DWLNR164CKC3 DWLNR164DKC3

1.00 1.00 1.250 5.00 1.00 — 1.00 1.00 1.250 6.00 1.00 —

WN..432 WN..432

IWSN433 IWSN433

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DWLNR204DKC3 left hand

1.25 1.25 1.500 6.00 1.00 —

WN..432

IWSN433

KMSP415IP

15 IP

CM234R ASSY

15 IP

SSP025016M

DWLNL123BKC3 DWLNL163CKC3

.75 .75 1.000 4.50 1.00 .28 1.00 1.00 1.250 5.00 1.00 .06

WN..332 WN..332

IWSN322 IWSN322

KMSP315IP KMSP315IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DWLNL163DKC3 DWLNL164CKC3

1.00 1.00 1.250 6.00 1.00 .06 1.00 1.00 1.250 5.00 1.00 —

WN..332 WN..432

IWSN322 IWSN433

KMSP315IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

DWLNL164DKC3 DWLNL204DKC3

1.00 1.00 1.250 6.00 1.00 — 1.25 1.25 1.500 6.00 1.00 —

WN..432 WN..432

IWSN433 IWSN433

KMSP415IP KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

15 IP 15 IP

SSP025016M SSP025016M

www.kennametal.com

Kenloc™ Toolholders Kenloc Inserts

See pages B40–B49 for inserts.

catalog number right hand MCFNR124B

.75

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.000 4.50 1.25

CN..432

ICSN433

KL46

3/32

CK20

STC20

1/8

MCFNR164C MCFNR164D

1.00 1.00 1.250 5.00 1.25 1.00 1.00 1.250 6.00 1.25

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

left hand MCFNL164C

1.00 1.00 1.250 5.00 1.25

CN..432

ICSN433

KL46

3/32

CK20

STC20

1/8

MCFNL164D

1.00 1.00 1.250 6.00 1.25

CN..432

ICSN433

KL46

3/32

CK20

STC20

1/8

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.000 4.50 1.25

CN..432

ICSN433

KL46

3/32

CK20

STC20

1/8

1.00 1.00 1.250 5.00 1.25 1.00 1.00 1.250 6.00 1.25

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

1.000 4.50 1.25

CN..432

ICSN433

KL46

3/32

CK20

STC20

1/8

1.00 1.00 1.250 5.00 1.25 1.00 1.00 1.250 6.00 1.25

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

See pages B40–B49 for inserts.

MCGN 0°

catalog number right hand MCGNR124B MCGNR164C MCGNR164D left hand MCGNL124B MCGNL164C MCGNL164D

.75

www.kennametal.com

.75

C15

O.D./I.D. Tooling

MCFN 0°

Kenloc™ Toolholders Kenloc Inserts

See pages B40–B49 for inserts.

O.D./I.D. Tooling

MCHN 50°

catalog number MCHNN164C MCHNN205D

H B F L1 L2 1.00 1.00 .500 5.00 1.25 1.25 1.25 .625 6.00 1.38

gage insert CN..432 CN..543

shim ICSN433 ICSN533

lock pin KL46 KL58

hex (inch) 3/32 1/8

clamp CK21 CK21

clamp screw STC20 STC20

hex (inch) 1/8 1/8

MCHNN246D

1.50 1.50 .750 6.00 1.60

CN..643

ICSN633

KL68

9/64

CK12

STC4

5/32

clamp screw

hex (inch)

See pages B40–B49 for inserts.

MCKN 15°

catalog number right hand MCKNR124B

C16

.75

L1A

gage insert

shim

lock pin

hex (inch)

clamp

.75 1.000 4.50 1.21 .12

CN..432

ICSN433

KL46

3/32

CK20

STC20

1/8

MCKNR164C MCKNR164D

1.00 1.00 1.250 5.00 1.21 .12 1.00 1.00 1.250 6.00 1.21 .12

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MCKNR165C MCKNR165D

1.00 1.00 1.250 5.00 1.25 .15 1.00 1.00 1.250 6.00 1.25 .15

CN..543 CN..543

ICSN533 ICSN533

KL58 KL58

1/8 1/8

CK9 CK9

STC4 STC4

5/32 5/32

MCKNR204D MCKNR205D

1.25 1.25 1.500 6.00 1.21 .12 1.25 1.25 1.500 6.00 1.25 .15

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

3/32 1/8

CK20 CK9

STC20 STC4

1/8 5/32

MCKNR206D MCKNR245D

1.25 1.25 1.500 6.00 1.47 .18 1.50 1.50 2.000 6.00 1.25 .15

CN..643 CN..543

ICSN633 ICSN533

KL68 KL58

9/64 1/8

CK12 CK9

STC4 STC4

5/32 5/32

MCKNR246D left hand

1.50 1.50 2.000 6.00 1.47 .18

CN..643

ICSN633

KL68

9/64

CK12

STC4

5/32

MCKNL124B MCKNL164C

.75 .75 1.000 4.50 1.21 .12 1.00 1.00 1.250 5.00 1.21 .12

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MCKNL164D MCKNL165D

1.00 1.00 1.250 6.00 1.21 .12 1.00 1.00 1.250 6.00 1.25 .15

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

3/32 1/8

CK20 CK9

STC20 STC4

1/8 5/32

MCKNL204D MCKNL205D

1.25 1.25 1.500 6.00 1.21 .12 1.25 1.25 1.500 6.00 1.25 .15

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

3/32 1/8

CK20 CK9

STC20 STC4

1/8 5/32

MCKNL206D MCKNL245D

1.25 1.25 1.500 6.00 1.47 .18 1.50 1.50 2.000 6.00 1.25 .15

CN..643 CN..543

ICSN633 ICSN533

KL68 KL58

9/64 1/8

CK12 CK9

STC4 STC4

5/32 5/32

MCKNL246D

1.50 1.50 2.000 6.00 1.47 .18

CN..643

ICSN633

KL68

9/64

CK12

STC4

5/32

www.kennametal.com

Kenloc™ Toolholders Kenloc Inserts

See pages B40–B49 for inserts.

catalog number right hand MCLNR083A

gage insert

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

.50

.750

4.00

1.00

CN..322

MCLNR103A MCLNR123B

.63 .75

.875 1.000

4.00 4.50

1.00 1.00

CN..322 CN..322

—

KL33

— ICSN332

KL33 KL34L

5/64

CK6

STC5

3/32

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

MCLNR124A MCLNR124B

.75 .75

1.000 1.000

4.00 4.50

1.20 1.20

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MCLNR163C MCLNR163D

1.00 1.00

1.250 1.250

5.00 6.00

1.00 1.00

CN..322 CN..322

ICSN332 ICSN332

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

MCLNR164C MCLNR164D

1.00 1.00

1.250 1.250

5.00 6.00

1.20 1.20

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MCLNR165C MCLNR165D

1.00 1.00

1.250 1.250

5.00 6.00

1.37 1.37

CN..543 CN..543

ICSN533 ICSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

MCLNR166C MCLNR166D

1.00 1.00

1.250 1.250

5.00 6.00

1.49 1.49

CN..643 CN..643

ICSN633 ICSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

MCLNR204D MCLNR205D

1.25 1.25

1.500 1.500

6.00 6.00

1.20 1.37

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

3/32 1/8

CK20 CK12

STC20 STC4

1/8 5/32

MCLNR206D MCLNR244D

1.25 1.50

1.500 2.000

6.00 6.00

1.49 1.20

CN..643 CN..432

ICSN633 ICSN433

KL68 KL46

9/64 3/32

CK12 CK20

STC4 STC20

5/32 1/8

MCLNR245D MCLNR245E

1.50 1.50

2.000 2.000

6.00 7.00

1.37 1.37

CN..543 CN..543

ICSN533 ICSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

MCLNR246D MCLNR246E

1.50 1.50

2.000 2.000

6.00 7.00

1.49 1.49

CN..643 CN..643

ICSN633 ICSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

MCLNR248E MCLNR326F

1.50 2.00

2.000 2.500

7.00 8.00

1.49 1.49

CN..866 CN..643

ICSN846 ICSN633

KL810 KL68

5/32 9/64

CK24 CK12

STC19 STC4

3/16 5/32

MCLNR854D MCLNR856D

1.25 1.25

1.00 1.00

1.250 1.250

6.00 6.00

1.20 1.49

CN..432 CN..643

ICSN433 ICSN633

KL46 KL68

3/32 9/64

CK20 CK12

STC20 STC4

1/8 5/32

MCLNR866D MCLNR866E

1.50 1.50

1.00 1.00

1.250 1.250

6.00 7.00

1.49 1.49

CN..643 CN..643

ICSN633 ICSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

shim

(continued)

www.kennametal.com

C17

O.D./I.D. Tooling

MCLN -5°

Kenloc™ Toolholders Kenloc Inserts

O.D./I.D. Tooling

(MCLN -5° continued)

catalog number left hand MCLNL083A

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

.50

.750

4.00

1.00

CN..322

—

KL33

5/64

MCLNL103A MCLNL123B

.63 .75

.875 1.000

4.00 4.50

1.00 1.00

CN..322 CN..322

— ICSN332

KL33 KL34L

5/64 5/64

CK6

STC5

3/32

CK6 CK6

STC5 STC5

3/32 3/32

MCLNL124A MCLNL124B

.75 .75

1.000 1.000

4.00 4.50

1.20 1.20

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MCLNL164C MCLNL164D

1.00 1.00

1.250 1.250

5.00 6.00

1.20 1.20

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MCLNL165C MCLNL165D

1.00 1.00

1.250 1.250

5.00 6.00

1.37 1.37

CN..543 CN..543

ICSN533 ICSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

MCLNL166C MCLNL166D

1.00 1.00

1.250 1.250

5.00 6.00

1.49 1.49

CN..643 CN..643

ICSN633 ICSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

MCLNL204D MCLNL205D

1.25 1.25

1.500 1.500

6.00 6.00

1.20 1.37

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

3/32 1/8

CK20 CK12

STC20 STC4

1/8 5/32

MCLNL206D MCLNL244D

1.25 1.50

1.500 2.000

6.00 6.00

1.49 1.20

CN..643 CN..432

ICSN633 ICSN433

KL68 KL46

9/64 3/32

CK12 CK20

STC4 STC20

5/32 1/8

MCLNL245D MCLNL245E

1.50 1.50

2.000 2.000

6.00 7.00

1.37 1.37

CN..543 CN..543

ICSN533 ICSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

MCLNL246D MCLNL246E

1.50 1.50

2.000 2.000

6.00 7.00

1.49 1.49

CN..643 CN..643

ICSN633 ICSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

MCLNL248E MCLNL326F

1.50 2.00

2.000 2.500

7.00 8.00

1.49 1.49

CN..866 CN..643

ICSN846 ICSN633

KL810 KL68

5/32 9/64

CK24 CK12

STC19 STC4

3/16 5/32

MCLNL854D MCLNL856D

1.25 1.25

1.00 1.00

1.250 1.250

6.00 6.00

1.20 1.49

CN..432 CN..643

ICSN433 ICSN633

KL46 KL68

3/32 9/64

CK20 CK12

STC20 STC4

1/8 5/32

MCLNL866E

1.50

1.00

1.250

7.00

1.49

CN..643

ICSN633

KL68

9/64

CK12

STC4

5/32

See pages B40–B49 for inserts.

MCMN 40°

C18

catalog number MCMNN124B MCMNN164C

H .75 1.00

B .75 1.00

F .375 .500

L1 L2 4.500 1.39 5.000 1.39

gage insert CN..432 CN..432

shim ICSN433 ICSN433

lock pin KL46 KL46

hex (inch) 3/32 3/32

clamp CK20 CK20

clamp screw STC20 STC20

hex (inch) 1/8 1/8

MCMNN164D MCMNN204D

1.00 1.25

.500 .625

6.000 1.39 6.000 1.39

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MCMNN166D MCMNN206D

1.00 1.25

.500 .625

6.000 1.67 6.000 1.67

CN..643 CN..643

ICSN633 ICSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

MCMNN246D MCMNN246E

1.50 1.50

.750 .750

6.000 1.67 7.000 1.67

CN..643 CN..643

ICSN633 ICSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

www.kennametal.com

Kenloc™ Toolholders Kenloc Inserts

See pages B40–B49 for inserts.

catalog number right hand MCRNR124B

.75

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

.751 4.50 1.24 .12

CN..432

ICSN433

KL46

3/32

CK9

STC4

5/32

MCRNR164C MCRNR164D

1.00 1.00 1.251 5.00 1.24 .12 1.00 1.00 1.251 6.00 1.24 .12

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MCRNR165D MCRNR166D

1.00 1.00 1.251 6.00 1.34 .15 1.00 1.00 1.251 6.00 1.49 .18

CN..543 CN..643

ICSN533 ICSN633

KL58 KL68

1/8 9/64

CK9 CK12

STC4 STC4

5/32 5/32

MCRNR204D MCRNR205D

1.25 1.25 1.500 6.00 1.24 .12 1.25 1.25 1.501 6.00 1.34 .15

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

3/32 1/8

CK9 CK9

STC4 STC4

5/32 5/32

MCRNR206D MCRNR244D

1.25 1.25 1.501 6.00 1.49 .18 1.50 1.50 2.001 6.00 1.24 .12

CN..643 CN..432

ICSN633 ICSN433

KL68 KL46

9/64 3/32

CK12 CK9

STC4 STC4

5/32 5/32

MCRNR245D MCRNR246D

1.50 1.50 2.001 6.00 1.34 .15 1.50 1.50 2.001 6.00 1.49 .18

CN..543 CN..643

ICSN533 ICSN633

KL58 KL68

1/8 9/64

CK9 CK12

STC4 STC4

5/32 5/32

MCRNR246E left hand

1.50 1.50 2.001 7.00 1.49 .18

CN..643

ICSN633

KL68

9/64

CK12

STC4

5/32

MCRNL124B MCRNL164C

.75 .75 .751 4.50 1.24 .12 1.00 1.00 1.251 5.00 1.24 .12

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MCRNL164D MCRNL165D

1.00 1.00 1.251 6.00 1.24 .12 1.00 1.00 1.251 6.00 1.34 .15

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

3/32 1/8

CK9 CK9

STC4 STC4

5/32 5/32

MCRNL166D MCRNL204D

1.00 1.00 1.251 6.00 1.49 .18 1.25 1.25 1.500 6.00 1.24 .12

CN..643 CN..432

ICSN633 ICSN433

KL68 KL46

9/64 3/32

CK12 CK9

STC4 STC4

5/32 5/32

MCRNL205D MCRNL206D

1.25 1.25 1.501 6.00 1.34 .15 1.25 1.25 1.501 6.00 1.49 .18

CN..543 CN..643

ICSN533 ICSN633

KL58 KL68

1/8 9/64

CK9 CK12

STC4 STC4

5/32 5/32

MCRNL245D MCRNL246D

1.50 1.50 2.001 6.00 1.34 .15 1.50 1.50 2.001 6.00 1.49 .18

CN..543 CN..643

ICSN533 ICSN633

KL58 KL68

1/8 9/64

CK9 CK12

STC4 STC4

5/32 5/32

MCRNL246E

1.50 1.50 2.001 7.00 1.49 .18

CN..643

ICSN633

KL68

9/64

CK12

STC4

5/32

www.kennametal.com

C19

O.D./I.D. Tooling

MCRN 15°

Kenloc™ Toolholders Kenloc Inserts

See pages B50–B57 for inserts.

O.D./I.D. Tooling

MDJN -3°

catalog number right hand MDJNR123B

.75

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.000 4.50 1.25

DN..332

IDSN322

KL34L

5/64

CK7

STC5

3/32

MDJNR163C MDJNR163D

1.00 1.00 1.250 5.00 1.25 1.00 1.00 1.250 6.00 1.25

DN..332 DN..332

IDSN322 IDSN322

KL34L KL34L

5/64 5/64

CK7 CK7

STC5 STC5

3/32 3/32

MDJNR203D MDJNR243D

1.25 1.25 1.500 6.00 1.25 1.50 1.50 2.000 6.00 1.25

DN..332 DN..332

IDSN322 IDSN322

KL34L KL34L

5/64 5/64

CK7 CK7

STC5 STC5

3/32 3/32

1.000 4.50 1.38 1.000 4.00 1.38

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK23 CK23

STC20 STC20

1/8 1/8

MDJNR164C MDJNR164D

1.00 1.00 1.250 5.00 1.24 1.00 1.00 1.250 6.00 1.24

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MDJNR854D MDJNR204D

1.25 1.00 1.250 6.00 1.24 1.25 1.25 1.500 6.00 1.24

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MDJNR165D MDJNR205D

1.00 1.00 1.250 6.00 1.47 1.25 1.25 1.500 6.00 1.47

DN..543 DN..543

IDSN533 IDSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

MDJNR245D MDJNR245E

1.50 1.50 2.000 6.00 1.47 1.50 1.50 2.000 7.00 1.47

DN..543 DN..543

IDSN533 IDSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

MDJNR124B MDJNR124A

left hand MDJNL123B

C20

.75 .75

.75

.75 .75

1.000 4.50 1.25

DN..332

IDSN322

KL34L

5/64

CK7

STC5

3/32

MDJNL163C MDJNL163D

1.00 1.00 1.250 5.00 1.25 1.00 1.00 1.250 6.00 1.25

.75

DN..332 DN..332

IDSN322 IDSN322

KL34L KL34L

5/64 5/64

CK7 CK7

STC5 STC5

3/32 3/32

MDJNL203D MDJNL124B

1.25 1.25 1.500 6.00 1.25 .75 .75 1.000 4.50 1.38

DN..332 DN..432

IDSN322 IDSN443

KL34L KL46L

5/64 3/32

CK7 CK23

STC5 STC20

3/32 1/8

MDJNL124A MDJNL164C

.75 .75 1.000 4.00 1.38 1.00 1.00 1.250 5.00 1.24

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK23 CK20

STC20 STC20

1/8 1/8

MDJNL164D MDJNL854D

1.00 1.00 1.250 6.00 1.24 1.25 1.00 1.250 6.00 1.24

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MDJNL204D MDJNL165D

1.25 1.25 1.500 6.00 1.24 1.00 1.00 1.250 6.00 1.47

DN..432 DN..543

IDSN443 IDSN533

KL46L KL58

3/32 1/8

CK20 CK12

STC20 STC4

1/8 5/32

MDJNL205D MDJNL245D

1.25 1.25 1.500 6.00 1.47 1.50 1.50 2.000 6.00 1.47

DN..543 DN..543

IDSN533 IDSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

MDJNL245E

1.50 1.50 2.000 7.00 1.47

DN..543

IDSN533

KL58

1/8

CK12

STC4

5/32

www.kennametal.com

Kenloc™ Toolholders Kenloc Inserts

See pages B50–B57 for inserts.

catalog number MDPNN123B MDPNN163C

H B F L1 L2 .75 .75 .375 4.50 1.50 1.00 1.00 .500 5.00 1.50

gage insert DN..332 DN..332

shim IDSN322 IDSN322

lock pin KL34L KL34L

hex (inch) 5/64 5/64

clamp CK7 CK7

clamp screw STC5 STC5

hex (inch) 3/32 3/32

MDPNN163D MDPNN164D

1.00 1.00 .500 6.00 1.50 1.00 1.00 .500 6.00 1.63

DN..332 DN..432

IDSN322 IDSN443

KL34L KL46L

5/64 3/32

CK7 CK12

STC5 STC4

3/32 5/32

MDPNN855D MDPNN205D

1.25 1.00 .500 6.00 1.92 1.25 1.25 .625 6.00 1.92

DN..543 DN..543

IDSN533 IDSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

MDPNN245D

1.50 1.50 .750 6.00 1.92

DN..543

IDSN533

KL58

1/8

CK12

STC4

5/32

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

See pages B50–B57 for inserts.

MDQN -17.5°

catalog number right hand MDQNR124B

.75

gage insert

shim

1.000 4.50 1.37

DN..432

IDSN443

KL46L

3/32

CK23

STC20

1/8

MDQNR164C MDQNR164D

1.00 1.00 1.250 5.00 1.37 1.00 1.00 1.250 6.00 1.37

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MDQNR204D MDQNR244D

1.25 1.25 1.500 6.00 1.37 1.50 1.50 2.000 6.00 1.37

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MDQNR244E left hand

1.50 1.50 2.000 7.00 1.37

DN..432

IDSN443

KL46L

3/32

CK20

STC20

1/8

MDQNL124B MDQNL164C

.75 .75 1.000 4.50 1.37 1.00 1.00 1.250 5.00 1.37

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK23 CK20

STC20 STC20

1/8 1/8

MDQNL164D MDQNL204D

1.00 1.00 1.250 6.00 1.37 1.25 1.25 1.500 6.00 1.37

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MDQNL244D MDQNL244E

1.50 1.50 2.000 6.00 1.37 1.50 1.50 2.000 7.00 1.37

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

MDQNL245E

1.50 1.50 2.000 7.00 1.47

DN..543

IDSN533

KL58

1/8

CK12

STC4

5/32

www.kennametal.com

C21

O.D./I.D. Tooling

MDPN 27.5°

Kenloc™ Toolholders Kenloc Inserts

See page B58 for inserts.

O.D./I.D. Tooling

MRGN

gage insert

shim

lock pin

4.50

.88

RN..32

IRSN33

KL34L

5/64

4.50 6.00

1.00 .88

RN..43 RN..32

IRSN43 IRSN33

KL46 KL34L

3/32 5/64

5.00 6.00

1.00 1.00

RN..43 RN..43

IRSN43 IRSN43

KL46 KL46

3/32 3/32

1.250 1.250

6.00 6.00

1.25 1.31

RN..54 RN..64

IRSN53 IRSN63

KL58 KL68

1.25 1.25

1.500 1.500

6.00 6.00

1.00 1.31

RN..43 RN..64

IRSN43 IRSN63

1.50 1.50

2.000 2.000

6.00 7.00

1.31 1.56

RN..64 RN..86

left hand MRGNL164D

1.00

1.250

6.00

1.00

MRGNL165D MRGNL166D

1.00 1.00

1.250 1.250

6.00 6.00

1.25 1.31

MRGNL204D MRGNL206D

1.25 1.25

1.500 1.500

6.00 6.00

MRGNL246D MRGNL248E

1.50 1.50

2.000 2.000

6.00 7.00

catalog number right hand MRGNR123B

.75

1.000

MRGNR124B MRGNR163D

.75 1.00

1.000 1.250

MRGNR164C MRGNR164D

1.00 1.00

1.250 1.250

MRGNR165D MRGNR166D

1.00 1.00

MRGNR204D MRGNR206D

1.25 1.25

MRGNR246D MRGNR248E

hex (inch)

clamp screw

hex (inch)

CK6

STC5

3/32

CK21 CK6

STC20 STC5

1/8 3/32

CK9 CK9

STC4 STC4

5/32 5/32

1/8 9/64

CK12 CK12

STC4 STC4

5/32 5/32

KL46 KL68

3/32 9/64

CK9 CK12

STC4 STC4

5/32 5/32

IRSN63 IRSN84

KL68 KL810

9/64 5/32

CK12 CK24

STC4 STC19

5/32 3/16

RN..43

IRSN43

KL46

3/32

CK9

STC4

5/32

RN..54 RN..64

IRSN53 IRSN63

KL58 KL68

1/8 9/64

CK12 CK12

STC4 STC4

5/32 5/32

1.00 1.31

RN..43 RN..64

IRSN43 IRSN63

KL46 KL68

3/32 9/64

CK9 CK12

STC4 STC4

5/32 5/32

1.31 1.56

RN..64 RN..86

IRSN63 IRSN84

KL68 KL810

9/64 5/32

CK12 CK24

STC4 STC19

5/32 3/16

clamp

See pages B59–B65 for inserts.

MSDN 45°

C22

catalog number MSDNN083 MSDNN103

H .50 .63

B .50 .63

F .250 .312

L1 L2 4.500 1.14 4.500 1.14

gage insert SN..322 SN..322

shim ISSN322 ISSN322

lock pin KL34 KL34

hex (inch) 5/64 5/64

clamp CK6 CK6

clamp screw STC5 STC5

hex (inch) 3/32 3/32

MSDNN123 MSDNN124

.75 .75

.375 .375

4.500 1.14 4.500 1.39

SN..322 SN..432

ISSN322 ISSN433

KL34 KL46

5/64 3/32

CK6 CK9

STC5 STC4

3/32 5/32

MSDNN164 MSDNN854

1.00 1.25

1.00 1.00

.500 .500

6.000 1.39 6.000 1.39

SN..432 SN..432

ISSN433 ISSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MSDNN855 MSDNN856

1.25 1.25

1.00 1.00

.500 .500

6.000 1.62 6.000 1.62

SN..543 SN..643

ISSN533 ISSN633

KL58 KL68

1/8 9/64

CK12 CK12

STC4 STC4

5/32 5/32

MSDNN206 MSDNN866

1.25 1.50

1.25 1.00

.625 .500

7.000 1.62 7.000 1.62

SN..643 SN..643

ISSN633 ISSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

MSDNN246

1.50

.750

7.000 1.62

SN..643

ISSN633

KL68

9/64

CK12

STC4

5/32

www.kennametal.com

Kenloc™ Toolholders Kenloc Inserts

See pages B59–B65 for inserts.

catalog number right hand MSKNR124B

.75

L1A

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

.75 1.000 4.500 1.25 .12

SN..432

ISSN433

KL46

3/32

CK9

STC4

5/32

MSKNR164C MSKNR164D

1.00 1.00 1.250 5.000 1.25 .12 1.00 1.00 1.250 6.000 1.25 .12

SN..432 SN..432

ISSN433 ISSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MSKNR204D MSKNR205D

1.25 1.25 1.500 6.000 1.13 .12 1.25 1.25 1.500 6.000 1.34 .15

SN..432 SN..543

ISSN433 ISSN533

KL46 KL58

3/32 1/8

CK9 CK12

STC4 STC4

5/32 5/32

MSKNR206D MSKNR246D

1.25 1.25 1.500 6.000 1.50 .18 1.50 1.50 2.000 6.000 1.50 .18

SN..643 SN..643

ISSN633 ISSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

MSKNR248 left hand

1.50 1.50 2.000 8.000 1.62 .23

SN..866

ISSN846

KL810

5/32

CK24

STC19

3/16

MSKNL124B MSKNL164D

.75 .75 1.000 4.500 1.25 .12 1.00 1.00 1.250 6.000 1.25 .12

SN..432 SN..432

ISSN433 ISSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MSKNL204D MSKNL205D

1.25 1.25 1.500 6.000 1.13 .12 1.25 1.25 1.500 6.000 1.34 .15

SN..432 SN..543

ISSN433 ISSN533

KL46 KL58

3/32 1/8

CK9 CK12

STC4 STC4

5/32 5/32

MSKNL206D MSKNL246D

1.25 1.25 1.500 6.000 1.50 .18 1.50 1.50 2.000 6.000 1.50 .18

SN..643 SN..643

ISSN633 ISSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

See pages B59–B65 for inserts.

MSRN 15°

catalog number right hand MSRNR124B

.75

.880

4.50 1.23 .12

SN..432

ISSN433

KL46

3/32

CK9

STC4

5/32

MSRNR164C MSRNR164D

1.00 1.00 1.130 1.00 1.00 1.130

5.00 1.23 .12 6.00 1.23 .12

SN..432 SN..432

ISSN433 ISSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MSRNR204D MSRNR165C

1.25 1.25 1.380 1.00 1.00 1.103

6.00 1.25 .12 5.00 1.46 .15

SN..432 SN..543

ISSN433 ISSN533

KL46 KL58

3/32 1/8

CK9 CK12

STC4 STC4

5/32 5/32

MSRNR855D MSRNR205D

1.25 1.00 1.103 1.25 1.25 1.353

6.00 1.46 .15 6.00 1.46 .15

SN..543 SN..543

ISSN533 ISSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

MSRNR856D MSRNR206D

1.25 1.00 1.071 1.25 1.25 1.321

6.00 1.50 .18 6.00 1.50 .18

SN..643 SN..643

ISSN633 ISSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

MSRNR246D MSRNR246E

1.50 1.50 1.821 1.50 1.50 1.821

6.00 1.50 .18 7.00 1.50 .18

SN..643 SN..643

ISSN633 ISSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

1.50 1.50 1.770 8.00 1.62 .23 2.00 2.00 2.270 18.00 1.62 .23

SN..866 SN..866

ISSN846 ISSN846

KL810 KL810

5/32 5/32

CK24 CK24

STC19 STC19

3/16 3/16

MSRNR248 MSRNR328

(continued)

www.kennametal.com

C23

O.D./I.D. Tooling

MSKN 15°

Kenloc™ Toolholders Kenloc Inserts (MSRN 15° continued)

O.D./I.D. Tooling

catalog number left hand MSRNL124B

.75

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

.880

4.50 1.23 .12

SN..432

ISSN433

KL46

3/32

CK9

STC4

5/32

MSRNL164C MSRNL164D

1.00 1.00 1.130 1.00 1.00 1.130

5.00 1.23 .12 6.00 1.23 .12

SN..432 SN..432

ISSN433 ISSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MSRNL854D MSRNL204D

1.25 1.00 1.130 1.25 1.25 1.380

6.00 1.23 .12 6.00 1.25 .12

SN..432 SN..432

ISSN433 ISSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MSRNL165C MSRNL205D

1.00 1.00 1.103 1.25 1.25 1.353

5.00 1.46 .15 6.00 1.46 .15

SN..543 SN..543

ISSN533 ISSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

MSRNL856D MSRNL206D

1.25 1.00 1.071 1.25 1.25 1.321

6.00 1.50 .18 6.00 1.50 .18

SN..643 SN..643

ISSN633 ISSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

MSRNL246D MSRNL246E

1.50 1.50 1.821 1.50 1.50 1.821

6.00 1.50 .18 7.00 1.50 .18

SN..643 SN..643

ISSN633 ISSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

1.50 1.50 1.770 8.00 1.62 .23 2.00 2.00 2.270 18.00 1.62 .23

SN..866 SN..866

ISSN846 ISSN846

KL810 KL810

5/32 5/32

CK24 CK24

STC19 STC19

3/16 3/16

MSRNL248 MSRNL328

See pages B59–B65 for inserts.

MSSN 45°

catalog number right hand MSSNR123B

.75

FA L1A

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

.75

.641 4.50 1.12 .64 .25 .25

SN..322

ISSN322

KL34

5/64

CK6

STC5

3/32

MSSNR124B MSSNR164C

.75 .75 1.00 1.00

.662 4.50 1.24 .66 .34 .33 .912 5.00 1.24 .91 .34 .33

SN..432 SN..432

ISSN433 ISSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MSSNR164D MSSNR854D

1.00 1.00 1.25 1.00

.912 6.00 1.24 .91 .34 .33 .912 6.00 1.24 .91 .34 .33

SN..432 SN..432

ISSN433 ISSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MSSNR165D MSSNR205D

1.00 1.00 .828 6.00 1.38 .83 .42 .42 1.25 1.25 1.078 6.00 1.38 1.08 .42 .42

SN..543 SN..543

ISSN533 ISSN533

KL58 KL58

1/8 1/8

CK9 CK9

STC4 STC4

5/32 5/32

MSSNR246D MSSNR206D

1.50 1.50 1.511 6.00 1.48 1.51 .52 .53 1.25 1.25 .992 6.00 1.48 .99 .52 .53

SN..643 SN..643

ISSN633 ISSN633

KL68 KL68

9/64 9/64

CK9 CK9

STC4 STC4

5/32 5/32

left hand MSSNL083B

C24

.50

.391 4.50 1.12 .39 .25 .25

SN..322

ISSN322

KL34

5/64

CK6

STC5

3/32

MSSNL164C MSSNL164D

1.00 1.00 1.00 1.00

.50

.912 5.00 1.24 .91 .34 .33 .912 6.00 1.24 .91 .34 .33

SN..432 SN..432

ISSN433 ISSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MSSNL854D MSSNL165D

1.25 1.00 1.00 1.00

.912 6.00 1.24 .91 .34 .33 .828 6.00 1.38 .83 .42 .42

SN..432 SN..543

ISSN433 ISSN533

KL46 KL58

3/32 1/8

CK9 CK9

STC4 STC4

5/32 5/32

MSSNL205D MSSNL246D

1.25 1.25 1.078 6.00 1.38 1.08 .42 .42 1.50 1.50 1.511 6.00 1.48 1.51 .52 .53

SN..543 SN..643

ISSN533 ISSN633

KL58 KL68

1/8 9/64

CK9 CK9

STC4 STC4

5/32 5/32

MSSNL206D

1.25 1.25

SN..643

ISSN633

KL68

9/64

CK9

STC4

5/32

.992 6.00 1.48 .99 .52 .53

www.kennametal.com

Kenloc™ Toolholders Kenloc Inserts

See pages B66–B74 for inserts.

gage insert

.500

4.50

.96

TN..221

—

.625 .750

4.50 1.12 4.50 1.12

TN..332 TN..332

ITSN323 ITSN323

1.00 1.00 1.000 6.00 1.21

TN..432

ITSN433

4.50 1.12 4.50 1.12

TN..332 TN..332

1.00 1.00 1.000 6.00 1.21

catalog number right hand MTANR082B

.50

MTANR103B MTANR123B

.63 .75

MTANR164D left hand MTANL103B MTANL123B MTANL164D

.63 .75

.625 .750

hex (inch)

clamp

KL23

1/16

CK19

STC9

3/32

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

KL46

3/32

CK9

STC4

5/32

ITSN323 ITSN323

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

TN..432

ITSN433

KL46

3/32

CK9

STC4

5/32

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

shim

lock pin

clamp screw

hex (inch)

See pages B66–B74 for inserts.

MTAN-S 0°

catalog number right hand MTANRS123

.75

.750

4.50 1.12

TN..332

ITSN323

KL34L

5/64

CK6

STC5

3/32

MTANRS163 MTANRS164

1.00 1.00 1.000 6.00 1.12 1.00 1.00 1.000 6.00 1.21

TN..332 TN..432

ITSN323 ITSN433

KL34L KL46

5/64 3/32

CK6 CK9

STC5 STC4

3/32 5/32

MTANRS854 MTANRS205

1.25 1.00 1.000 6.00 1.21 1.25 1.25 1.250 6.00 1.46

TN..432 TN..543

ITSN433 ITSN534

KL46 KL58

3/32 1/8

CK9 CK9

STC4 STC4

5/32 5/32

left hand MTANLS123

4.50 1.12

TN..332

ITSN323

KL34L

5/64

CK6

STC5

3/32

MTANLS163 MTANLS164

1.00 1.00 1.000 6.00 1.12 1.00 1.00 1.000 6.00 1.21

.75

TN..332 TN..432

ITSN323 ITSN433

KL34L KL46

5/64 3/32

CK6 CK9

STC5 STC4

3/32 5/32

MTANLS854 MTANLS205

1.25 1.00 1.000 6.00 1.21 1.25 1.25 1.250 6.00 1.46

TN..432 TN..543

ITSN433 ITSN534

KL46 KL58

3/32 1/8

CK9 CK9

STC4 STC4

5/32 5/32

www.kennametal.com

.75

.750

C25

O.D./I.D. Tooling

MTAN 0°

Kenloc™ Toolholders Kenloc Inserts

See pages B66–B74 for inserts.

O.D./I.D. Tooling

MTCN 0°

catalog number MTCNN083 MTCNN443

H B F L1 L2 .50 .50 .542 4.50 1.13 1.00 .50 .542 8.00 1.13

gage insert TN..332 TN..332

shim ITSN323 ITSN323

lock pin KL34L KL34L

hex (inch) 5/64 5/64

clamp CK7 CK7

clamp screw STC9 STC9

hex (inch) 3/32 3/32

MTCNN124 MTCNN644

.75 .75 .775 6.00 1.43 1.00 .75 .775 8.00 1.43

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK12 CK12

STC4 STC4

5/32 5/32

See pages B66–B74 for inserts.

MTEN-S 30°

B F L1 L2 .50 .250 4.50 .99 .63 .312 4.50 1.16

gage insert TN..221 TN..332

shim — ITSN323

lock pin KL23 KL34L

hex (inch) 1/16 5/64

clamp CK6 CK6

clamp screw STC5 STC5

hex (inch) 3/32 3/32

MTENNS123 MTENNS163

.75 .75 .375 4.50 1.16 1.00 1.00 .500 5.00 1.16

TN..332 TN..332

ITSN323 ITSN323

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

MTENNS164 MTENNS854

1.00 1.00 .500 6.00 1.40 1.25 1.00 .500 6.00 1.41

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MTENNS205 MTENNS246

1.25 1.25 .625 6.00 1.64 1.50 1.50 .750 7.00 1.95

TN..543 TN..663

ITSN534 ITSN636

KL58 KL68L

1/8 9/64

CK9 CK12

STC4 STC4

5/32 5/32

catalog number MTENNS082 MTENNS103

C26

H .50 .63

www.kennametal.com

Kenloc™ Toolholders Kenloc Inserts

See pages B66–B74 for inserts.

catalog number right hand MTFNR123B

.75

1.000 4.50

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

.94

TN..332

ITSN323

KL34L

5/64

CK6

STC5

3/32

MTFNR163C MTFNR124B

1.00 1.00 1.250 5.00 .94 .75 .75 1.000 4.50 1.22

TN..332 TN..432

ITSN323 ITSN433

KL34L KL46

5/64 3/32

CK6 CK9

STC5 STC4

3/32 5/32

MTFNR164C MTFNR164D

1.00 1.00 1.250 5.00 1.22 1.00 1.00 1.250 6.00 1.22

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MTFNR204D MTFNR854D

1.25 1.25 1.500 6.00 1.22 1.25 1.00 1.250 6.00 1.22

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MTFNR205D MTFNR245D

1.25 1.25 1.500 6.00 1.43 1.50 1.50 2.000 6.00 1.43

TN..543 TN..543

ITSN534 ITSN534

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

MTFNR246E left hand

1.50 1.50 2.000 7.00 1.49

TN..663

ITSN636

KL68L

9/64

CK12

STC4

5/32

MTFNL103B MTFNL163D

.63 .63 .875 4.50 1.00 1.00 1.250 6.00

.94 .94

TN..332 TN..332

ITSN323 ITSN323

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

MTFNL123B MTFNL164C

.75 .75 1.000 4.50 .94 1.00 1.00 1.250 5.00 1.22

TN..332 TN..432

ITSN323 ITSN433

KL34L KL46

5/64 3/32

CK6 CK9

STC5 STC4

3/32 5/32

MTFNL164D MTFNL204D

1.00 1.00 1.250 6.00 1.22 1.25 1.25 1.500 6.00 1.22

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MTFNL854D MTFNL245D

1.25 1.00 1.250 6.00 1.22 1.50 1.50 2.000 6.00 1.43

TN..432 TN..543

ITSN433 ITSN534

KL46 KL58

3/32 1/8

CK9 CK12

STC4 STC4

5/32 5/32

MTFNL246E

1.50 1.50 2.000 7.00 1.49

TN..663

ITSN636

KL68L

9/64

CK12

STC4

5/32

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

See pages B66–B74 for inserts.

MTFN-S 0°

catalog number right hand MTFNRS123

.75

.94

TN..332

ITSN323

KL34L

5/64

CK6

STC5

3/32

MTFNRS164 left hand

1.00 1.00 1.250 6.00 1.22

TN..432

ITSN433

KL46

3/32

CK9

STC4

5/32

MTFNLS123 MTFNLS164

.75 .75 1.000 4.50 .94 1.00 1.00 1.250 6.00 1.22

TN..332 TN..432

ITSN323 ITSN433

KL34L KL46

5/64 3/32

CK6 CK9

STC5 STC4

3/32 5/32

www.kennametal.com

1.000 4.50

C27

O.D./I.D. Tooling

MTFN 0°

Kenloc™ Toolholders Kenloc Inserts

See pages B66–B74 for inserts.

O.D./I.D. Tooling

MTGN 0°

catalog number right hand MTGNR082B

.50

.625

4.50

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

.96

TN..221

—

KL23

1/16

CK19

STC9

3/32

MTGNR103B MTGNR163C

.63 .63 .875 4.50 1.12 1.00 1.00 1.250 5.00 1.12

TN..322 TN..322

ITSN333 ITSN333

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

MTGNR163D MTGNR123B

1.00 1.00 1.250 6.00 1.12 .75 .75 1.000 4.50 1.12

TN..322 TN..332

ITSN333 ITSN323

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

MTGNR124B MTGNR164C

.75 .75 1.000 4.50 1.20 1.00 1.00 1.250 5.00 1.20

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MTGNR164D MTGNR204D

1.00 1.00 1.250 6.00 1.20 1.25 1.25 1.500 6.00 1.20

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MTGNR165C MTGNR205D

1.00 1.00 1.250 5.00 1.38 1.25 1.25 1.500 6.00 1.44

TN..543 TN..543

ITSN534 ITSN534

KL58 KL58

1/8 1/8

CK9 CK9

STC4 STC4

5/32 5/32

left hand MTGNL103B

.63

MTGNL123B MTGNL124B

.75 .75

4.50 1.12

TN..322

ITSN333

KL34L

5/64

CK6

STC5

3/32

1.000 4.50 1.12 1.000 4.50 1.20

.875

TN..332 TN..432

ITSN323 ITSN433

KL34L KL46

5/64 3/32

CK6 CK9

STC5 STC4

3/32 5/32

MTGNL164C MTGNL164D

1.00 1.00 1.250 5.00 1.20 1.00 1.00 1.250 6.00 1.20

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK6

STC4 STC4

5/32 5/32

MTGNL204D MTGNL205D

1.25 1.25 1.500 6.00 1.20 1.25 1.25 1.500 6.00 1.44

TN..432 TN..543

ITSN433 ITSN534

KL46 KL58

3/32 1/8

CK9 CK9

STC4 STC4

5/32 5/32

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

See pages B66–B74 for inserts.

MTJN -3°

catalog number right hand MTJNR082B

.50

MTJNR103B MTJNR123B

.63 .75

.625

4.50

.72

TN..221

—

KL23

1/16

CK19

STC9

3/32

.875 4.50 1.000 4.50

.88 .88

TN..322 TN..322

ITSN333 ITSN333

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

MTJNR163C MTJNR163D

1.00 1.00 1.250 5.00 1.00 1.00 1.250 6.00

.88 .88

TN..322 TN..322

ITSN333 ITSN333

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

MTJNR164D MTJNR204D

1.00 1.00 1.250 6.00 1.12 1.25 1.25 1.500 6.00 1.12

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MTJNR205D

1.25 1.25 1.500 6.00 1.25

TN..543

ITSN534

KL58

1/8

CK9

STC4

5/32 (continued)

C28

www.kennametal.com

Kenloc™ Toolholders Kenloc Inserts (MTJN -3° continued)

gage insert

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

MTJNL082B

.50

.625

4.50

.72

TN..221

MTJNL103B

.63

.875

4.50

.88

TN..322

—

KL23

1/16

CK19

STC9

3/32

ITSN333

KL34L

5/64

CK6

STC5

MTJNL123B

.75

1.000 4.50

.88

TN..322

3/32

ITSN333

KL34L

5/64

CK6

STC5

3/32

MTJNL163C

1.00 1.00 1.250 5.00

.88

MTJNL163D

1.00 1.00 1.250 6.00

.88

TN..322

ITSN333

KL34L

5/64

CK6

STC5

3/32

TN..322

ITSN333

KL34L

5/64

CK6

STC5

MTJNL164D

3/32

1.00 1.00 1.250 6.00 1.12

TN..432

ITSN433

KL46

3/32

CK9

STC4

5/32

MTJNL204D

1.25 1.25 1.500 6.00 1.12

TN..432

ITSN433

KL46

3/32

CK9

STC4

5/32

MTJNL205D

1.25 1.25 1.500 6.00 1.25

TN..543

ITSN534

KL58

1/8

CK9

STC4

5/32

hex (inch)

clamp

clamp screw

hex (inch)

shim

O.D./I.D. Tooling

catalog number left hand

See pages B66–B74 for inserts.

MTJN-S -3°

catalog number right hand MTJNRS123

.75

gage insert

shim

lock pin

1.000

4.500 1.12

TN..332

ITSN323

KL34L

5/64

CK6

STC5

3/32

MTJNRS163 MTJNRS124

1.00 1.00 1.250 .75 .75 1.000

6.000 1.12 4.500 1.19

TN..332 TN..432

ITSN323 ITSN433

KL34L KL46

5/64 3/32

CK6 CK9

STC5 STC4

3/32 5/32

MTJNRS204 MTJNRS854

1.25 1.25 1.250 1.25 1.00 1.250

6.000 1.19 6.000 1.19

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MTJNRS864 MTJNRS164

1.50 1.00 1.250 1.00 1.00 1.250

6.000 1.19 6.000 1.32

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MTJNRS165 MTJNRS205

1.00 1.00 1.250 1.25 1.25 1.500

6.000 1.44 6.000 1.44

TN..543 TN..543

ITSN534 ITSN534

KL58 KL58

1/8 1/8

CK9 CK9

STC4 STC4

5/32 5/32

MTJNRS246 left hand

1.50 1.50 2.000

7.000 1.62

TN..663

ITSN636

KL68L

9/64

CK12

STC4

5/32

MTJNLS123 MTJNLS163

.75 .75 1.000 1.00 1.00 1.250

4.500 1.12 6.000 1.12

TN..332 TN..332

ITSN323 ITSN323

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

MTJNLS124 MTJNLS204

.75 .75 1.000 1.25 1.25 1.250

4.500 1.19 6.000 1.19

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MTJNLS864 MTJNLS164

1.50 1.00 1.250 1.00 1.00 1.250

6.000 1.19 6.000 1.32

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MTJNLS165 MTJNLS205

1.00 1.00 1.250 1.25 1.25 1.500

6.000 1.44 6.000 1.44

TN..543 TN..543

ITSN534 ITSN534

KL58 KL58

1/8 1/8

CK9 CK9

STC4 STC4

5/32 5/32

MTJNLS246

1.50 1.50 2.000

7.000 1.62

TN..663

ITSN636

KL68L

9/64

CK12

STC4

5/32

www.kennametal.com

C29

Kenloc™ Toolholders Kenloc Inserts

See pages B66–B74 for inserts.

O.D./I.D. Tooling

MTRN 15°

catalog number right hand MTRNR103B

.63

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

.722 4.50 1.20 .15

TN..322

ITSN333

KL34L

5/64

CK20

STC11

1/8

MTRNR164D left hand

1.00 1.00 1.040 6.00 1.24 .20

TN..432

ITSN433

KL46

3/32

CK9

STC4

5/32

MTRNL164D

1.00 1.00 1.040 6.00 1.24 .20

TN..432

ITSN433

KL46

3/32

CK9

STC4

5/32

See pages B74–B78 for inserts.

MVJN -3°

catalog number right hand MVJNR123A

.75

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.000 4.00 1.66

VN..332

IVSN322

KL34L

5/64

CK43

STC4

5/32

MVJNR123B MVJNR163C

.75 .75 1.000 4.50 1.66 1.00 1.00 1.250 5.00 1.66

VN..332 VN..332

IVSN322 IVSN322

KL34L KL34L

5/64 5/64

CK43 CK43

STC4 STC4

5/32 5/32

MVJNR163D MVJNR853D

1.00 1.00 1.250 6.00 1.66 1.25 1.00 1.250 6.00 1.66

VN..332 VN..332

IVSN322 IVSN322

KL34L KL34L

5/64 5/64

CK43 CK43

STC4 STC4

5/32 5/32

MVJNR203D MVJNR243D

1.25 1.25 1.500 6.00 1.66 1.50 1.50 2.000 6.00 1.66

VN..332 VN..332

IVSN322 IVSN322

KL34L KL34L

5/64 5/64

CK43 CK43

STC4 STC4

5/32 5/32

MVJNR124B MVJNR164C

.75 .75 1.000 4.50 2.00 1.00 1.00 1.250 5.00 2.00

VN..432 VN..432

IVSN433 IVSN433

KL46 KL46

3/32 3/32

CK43 CK43

STC4 STC4

5/32 5/32

MVJNR164D MVJNR204D

1.00 1.00 1.250 6.00 2.00 1.25 1.25 1.500 6.00 2.00

VN..432 VN..432

IVSN433 IVSN433

KL46 KL46

3/32 3/32

CK43 CK43

STC4 STC4

5/32 5/32

MVJNR244D left hand

1.50 1.50 2.000 6.00 2.00

VN..432

IVSN433

KL46

3/32

CK43

STC4

5/32

1.000 4.00 1.66 1.000 4.50 1.66

VN..332 VN..332

IVSN322 IVSN322

KL34L KL34L

5/64 5/64

CK43 CK43

STC4 STC4

5/32 5/32

MVJNL163C MVJNL163D

1.00 1.00 1.250 5.00 1.66 1.00 1.00 1.250 6.00 1.66

VN..332 VN..332

IVSN322 IVSN322

KL34L KL34L

5/64 5/64

CK43 CK43

STC4 STC4

5/32 5/32

MVJNL853D MVJNL203D

1.25 1.00 1.250 6.00 1.66 1.25 1.25 1.500 6.00 1.66

VN..332 VN..332

IVSN322 IVSN322

KL34L KL34L

5/64 5/64

CK43 CK43

STC4 STC4

5/32 5/32

MVJNL243D MVJNL124B

1.50 1.50 2.000 6.00 1.66 .75 .75 1.000 4.50 2.00

VN..332 VN..432

IVSN322 IVSN433

KL34L KL46

5/64 3/32

CK43 CK43

STC4 STC4

5/32 5/32

MVJNL164C MVJNL164D

1.00 1.00 1.250 5.00 2.00 1.00 1.00 1.250 6.00 2.00

VN..432 VN..432

IVSN433 IVSN433

KL46 KL46

3/32 3/32

CK43 CK43

STC4 STC4

5/32 5/32

MVJNL204D MVJNL244D

1.25 1.25 1.500 6.00 2.00 1.50 1.50 2.000 6.00 2.00

VN..432 VN..432

IVSN433 IVSN433

KL46 KL46

3/32 3/32

CK43 CK43

STC4 STC4

5/32 5/32

MVJNL123A MVJNL123B

C30

.75 .75

www.kennametal.com

Kenloc™ Toolholders Kenloc Inserts

See pages B74–B78 for inserts.

gage insert

shim

lock pin

1.25 1.25 2.000 5.00 1.25

VN..432

IVSN433

KL46

3/32

1.25 1.25 2.000 6.00 1.25 1.50 1.50 2.250 6.00 1.25

VN..432 VN..432

IVSN433 IVSN433

KL46 KL46

3/32 3/32

left hand MVUNL204C

1.25 1.25 2.000 5.00 1.25

VN..432

IVSN433

KL46

3/32

MVUNL204D MVUNL244D

1.25 1.25 2.000 6.00 1.25 1.50 1.50 2.250 6.00 1.25

VN..432 VN..432

IVSN433 IVSN433

KL46 KL46

3/32 3/32

catalog number right hand MVUNR204C MVUNR204D MVUNR244D

hex (inch)

clamp screw

hex (inch)

CK43

STC4

5/32

CK43 CK43

STC4 STC4

5/32 5/32

CK43

STC4

5/32

CK43 CK43

STC4 STC4

5/32 5/32

clamp

See pages B74–B78 for inserts.

MVVN 17.5°

catalog number MVVNN123B MVVNN163C

H B F L1 L2 .75 .75 .375 4.50 1.77 1.00 1.00 .500 5.00 1.77

gage insert VN..332 VN..332

shim IVSN322 IVSN322

lock pin KL34L KL34L

hex (inch) 5/64 5/64

clamp CK43 CK43

clamp screw STC4 STC4

hex (inch) 5/32 5/32

MVVNN163D MVVNN853D

1.00 1.00 .500 6.00 1.77 1.25 1.00 .500 6.00 1.77

VN..332 VN..332

IVSN322 IVSN322

KL34L KL34L

5/64 5/64

CK43 CK43

STC4 STC4

5/32 5/32

MVVNN203D MVVNN164D

1.25 1.25 .625 6.00 1.77 1.00 1.00 .500 6.00 2.25

VN..332 VN..432

IVSN322 IVSN433

KL34L KL46

5/64 3/32

CK43 CK43

STC4 STC4

5/32 5/32

MVVNN204D MVVNN244E

1.25 1.25 .625 6.00 2.25 1.50 1.50 .750 7.00 2.25

VN..432 VN..432

IVSN433 IVSN433

KL46 KL46

3/32 3/32

CK43 CK43

STC4 STC4

5/32 5/32

www.kennametal.com

C31

O.D./I.D. Tooling

MVUN -3°

Kenloc™ Toolholders Kenloc Inserts

See pages B79–B83 for inserts.

O.D./I.D. Tooling

MWLN -5°

catalog number right hand MWLNR123B

.75

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.000 4.50 1.00

WN..332

IWSN322

KL34L

5/64

CK6

STC5

3/32

MWLNR163C MWLNR163D

1.00 1.00 1.250 5.00 1.00 1.00 1.00 1.250 6.00 1.00

WN..332 WN..332

IWSN322 IWSN322

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

MWLNR203D MWLNR124B

1.25 1.25 1.500 6.00 1.00 .75 .75 1.000 4.50 1.13

WN..332 WN..432

IWSN322 IWSN433

KL34L KL46

5/64 3/32

CK6 CK21

STC5 STC20

3/32 1/8

MWLNR164C MWLNR164D

1.00 1.00 1.250 5.00 1.13 1.00 1.00 1.250 6.00 1.13

WN..432 WN..432

IWSN433 IWSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MWLNR854D MWLNR204D

1.25 1.00 1.250 6.00 1.13 1.25 1.25 1.500 6.00 1.13

WN..432 WN..432

IWSN433 IWSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MWLNR244D left hand

1.50 1.50 2.000 6.00 1.13

WN..432

IWSN433

KL46

3/32

CK9

STC4

5/32

MWLNL123B MWLNL163C

.75 .75 1.000 4.50 1.00 1.00 1.00 1.250 5.00 1.00

WN..332 WN..332

IWSN322 IWSN322

KL34L KL34L

5/64 5/64

CK6 CK6

STC5 STC5

3/32 3/32

MWLNL163D MWLNL124B

1.00 1.00 1.250 6.00 1.00 .75 .75 1.000 4.50 1.13

WN..332 WN..432

IWSN322 IWSN433

KL34L KL46

5/64 3/32

CK6 CK21

STC5 STC20

3/32 1/8

MWLNL164C MWLNL164D

1.00 1.00 1.250 5.00 1.13 1.00 1.00 1.250 6.00 1.13

WN..432 WN..432

IWSN433 IWSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

MWLNL854D

1.25 1.00 1.250 6.00 1.13

WN..432

IWSN433

KL46

3/32

CK9

STC4

5/32

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

See page B118 for inserts.

MCLN-C -5°

C32

catalog number right hand MCLNRC164D

1.00 1.00 1.250 6.00 1.25

CN..432

ICSN442

KL46L

3/32

CK21

STC20

1/8

left hand MCLNLC164D

1.00 1.00 1.250 6.00 1.25

CN..432

ICSN442

KL46L

3/32

CK21

STC20

1/8

www.kennametal.com

Kenloc™ Toolholders Kenloc Ceramic Inserts

See page B119 for inserts.

gage insert

shim

1.00 1.00 1.250 6.00 1.25

RN..43

1.25 1.25 1.500 6.00 1.25 1.50 1.50 2.000 6.00 1.25

RN..43 RN..43

left hand MRGNLC164D

1.00 1.00 1.250 6.00 1.25

RN..43

MRGNLC204D MRGNLC244D

1.25 1.25 1.500 6.00 1.25 1.50 1.50 2.000 6.00 1.25

RN..43 RN..43

catalog number right hand MRGNRC164D MRGNRC204D MRGNRC244D

lock pin

hex (inch)

IRSN44

KL46L

3/32

CK21

STC20

1/8

IRSN44 IRSN44

KL46L KL46L

3/32 3/32

CK21 CK21

STC20 STC20

1/8 1/8

IRSN44

KL46L

3/32

CK21

STC20

1/8

IRSN44 IRSN44

KL46L KL46L

3/32 3/32

CK21 CK21

STC20 STC20

1/8 1/8

clamp

clamp screw

hex (inch)

See page B120 for inserts.

MSRN-C 15°

catalog number right hand MSRNRC164D left hand MSRNLC164D

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.00 1.00 1.130 6.00 1.25 .12

SN..432

ISSN442

KL46L

3/32

CK21

STC20

1/8

1.00 1.00 1.130 6.00 1.25 .12

SN..432

ISSN442

KL46L

3/32

CK21

STC20

1/8

www.kennametal.com

C33

O.D./I.D. Tooling

MRGN-C

Wedgelock™ Toolholders Wedgelock Inserts

See pages B66–B73 for inserts.

O.D./I.D. Tooling

WTEN 30°

catalog number WTENNS164 WTENNS205

H B F L1 L2 1.00 1.00 .500 6.00 1.38 1.25 1.25 .625 6.00 1.63

gage insert TN..432 TN..543

shim SM391 SM370

lock pin FPE5 FPE6

hex (inch) 1/16 & 3/32 3/32

clamp WC5 WC6

retaining ring RR5144-21 —

clamp screw S986 —

hex (inch) 5/32 & 1/8 5/32 & 3/16

gage insert

shim

lock pin

hex (inch)

clamp

retaining ring

clamp screw

hex (inch)

See pages B66–B73 for inserts.

WTIN -15°

catalog number right hand WTINRS164

C34

1.00 1.00 1.250 6.00 1.25

TN..432

SM391

FPE5

1/16 & 3/32

WC5

RR5144-21

S986

5/32 & 1/8

WTINRS205 left hand

1.25 1.25 1.500 6.00 1.50

TN..543

SM370

FPE6

3/32

WC6

—

5/32 & 3/16

WTINLS164 WTINLS205

1.00 1.00 1.250 6.00 1.25 1.25 1.25 1.500 6.00 1.50

TN..432 TN..543

SM391 SM370

FPE5 FPE6

1/16 & 3/32 3/32

WC5 WC6

RR5144-21 —

S986 —

5/32 & 1/8 5/32 & 3/16

www.kennametal.com

Wedgelock™ Toolholders Wedgelock Inserts

See pages B66–B73 for inserts.

catalog number right hand WTJNRS164

gage insert

shim

lock pin

hex (inch)

clamp

retaining ring

clamp screw

hex (inch)

1.00 1.00 1.250 6.00 1.38

TN..432

SM391

FPE5

1/16 & 3/32

WC5

RR5144-21

S986

5/32 & 1/8

WTJNRS854 left hand

1.25 1.00 1.250 6.00 1.38

TN..432

SM391

FPE5

1/16 & 3/32

WC5

RR5144-21

S986

5/32 & 1/8

WTJNLS164 WTJNLS854

1.00 1.00 1.250 6.00 1.38 1.25 1.00 1.250 6.00 1.38

TN..432 TN..432

SM391 SM391

FPE5 FPE5

1/16 & 3/32 1/16 & 3/32

WC5 WC5

RR5144-21 RR5144-21

S986 S986

5/32 & 1/8 5/32 & 1/8

See pages B79–B83 for inserts.

WWLN -5 °

catalog number right hand WWLNR124

gage insert

shim

lock pin

Torx

clamp

clamp screw

E-Clip

Torx

.75

1.000

4.50

1.25

WN..432

SM443

FP453

T10

MWW4

MS1372

E147

T25

WWLNR164 left hand

1.00

1.250

6.00

1.25

WN..432

SM443

FP477

T10

MWW4

MS1372

E147

T25

WWLNL164

1.00

1.250

6.00

1.25

WN..432

SM443

FP477

T10

MWW4

MS1372

E147

T25

www.kennametal.com

C35

O.D./I.D. Tooling

WTJN -3°

Top Notch™ Toolholders Kendex™ Negative Inserts

See page B122 for inserts.

O.D./I.D. Tooling

CCLN-MX -5°

catalog number right hand CCLNR164DMX5

gage insert

shim

shim screw

Torx

clamp assembly

Torx

1.00

1.250

6.00

1.25

CN.X452

552.221

554.260

T20

551.326

T25

CCLNR204DMX5 left hand

1.25

1.500

6.00

1.25

CN.X452

552.221

554.260

T20

551.326

T25

CCLNL164DMX5 CCLNL204DMX5

1.00 1.25

1.250 1.500

6.00 6.00

1.25 1.25

CN.X452 CN.X452

552.221 552.221

554.260 554.260

T20 T20

551.326 551.326

T25 T25

CCLNL245DMX5

1.50

2.000

6.00

1.38

CN.X553

552.223

554.261

T25

551.342

T25

shim 552.232

shim screw 554.260

Torx T20

clamp assembly 551.326

Torx T25

See pages B125–B126 for inserts.

CSDN-MX 45°

catalog number CSDNN164DMX5

C36

H 1.00

B 1.00

F .500

L1 6.00

L2 1.38

gage insert SN.X452

www.kennametal.com

Top Notch™ Toolholders Kendex™ Negative Inserts

See pages B125–B126 for inserts.

catalog number right hand CSKNR164DMX5

L1A

gage insert

shim

shim screw

Torx

clamp assembly

Torx

1.00

1.250

6.00

1.06

.12

SN.X452

552.232

554.260

T20

551.326

T25

left hand CSKNL164DMX5

1.00

1.250

6.00

1.06

.12

SN.X452

552.232

554.260

T20

551.326

T25

CSKNL204DMX5

1.25

1.500

6.00

1.06

.12

SN.X452

552.232

554.260

T20

551.326

T25

Torx

clamp assembly

Torx

See page B127 for inserts.

CWLN-MX -5°

catalog number right hand CWLNR164DMX5

gage insert

shim

shim screw

1.00

1.250

6.00

1.12

WN.X452

552.210

554.260

T20

551.326

T25

CWLNR204DMX5 left hand

1.25

1.500

6.00

1.12

WN.X452

552.210

554.260

T20

551.326

T25

CWLNL164DMX5 CWLNL204DMX5

1.00 1.25

1.250 1.500

6.00 6.00

1.12 1.12

WN.X452 WN.X452

552.210 552.210

554.260 554.260

T20 T20

551.326 551.326

T25 T25

www.kennametal.com

C37

O.D./I.D. Tooling

CSKN-MX 15°

Kendex™ Toolholders Kendex Negative Inserts

See page B122 for inserts.

O.D./I.D. Tooling

CCLN -5°

catalog number right hand CCLNR164

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

1.00

1.250

6.00

1.00

CN.422

SM396

S111

1/16

CK21

STC20

1/8

left hand CCLNL164

1.00

1.250

6.00

1.00

CN.422

SM396

S111

1/16

CK21

STC20

1/8

See page B122 for inserts.

CCLN-P -5°

catalog number right hand CCLNRP163D

gage insert

shim

shim screw

clamp

clamp screw

hex (inch)

1.00

1.250

6.00

1.25

CN.322

SM432

SL344

CK20

STC11

1/8

left hand CCLNLP163D

1.00

1.250

6.00

1.25

CN.322

SM432

SL344

CK20

STC11

1/8

gage insert

shim

shim screw

clamp

clamp screw

hex (inch)

1.00

1.161

6.00

1.25

.09

CN.322

SM432

SL344

CK20

STC11

1/8

See page B122 for inserts.

CCRN-P 15°

catalog number right hand CCRNRP163D

C38

www.kennametal.com

Kendex™ Toolholders Kendex Negative Inserts

See page B124 for inserts.

catalog number right hand CRGNR123

gage insert

.75

.875

4.50

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

.75

RN.32

SM46

S111

1/16

CK6

STC5

3/32

CRGNR163 CRGNR164

1.00 1.00 1.125 6.00 .75 1.00 1.00 1.125 6.00 1.00

RN.32 RN.42

SM46 SM218

S111 S111

1/16 1/16

CK6 CK12

STC5 STC4

3/32 5/32

CRGNR854 CRGNR864

1.25 1.00 1.125 6.00 1.00 1.50 1.00 1.125 8.00 1.00

RN.42 RN.42

SM218 SM218

S111 S111

1/16 1/16

CK12 CK12

STC4 STC4

5/32 5/32

CRGNR244F CRGNR206

1.50 1.50 2.000 8.00 1.25 1.25 1.25 1.500 6.00 1.38

RNG45 RNG65

SM45 SM456

S111 SL344

1/16 —

CK12 CK12

STC4 STC4

5/32 5/32

CRGNR246 CRGNR208

1.50 1.50 2.000 8.00 1.38 1.25 1.25 1.500 6.00 1.56

RNG65 RNG84

SM456 SM444

SL344 SL344

— —

CK12 CK24

STC4 STC19

5/32 3/16

CRGNR248 left hand

1.50 1.50 2.000 8.00 1.56

RNG84

SM444

SL344

—

CK24

STC19

3/16

CRGNL123 CRGNL163

.75 .75 .875 4.50 1.00 1.00 1.125 6.00

.75 .75

RN.32 RN.32

SM46 SM46

S111 S111

1/16 1/16

CK6 CK6

STC5 STC5

3/32 3/32

CRGNL164 CRGNL854

1.00 1.00 1.125 6.00 1.00 1.25 1.00 1.125 6.00 1.00

RN.42 RN.42

SM218 SM218

S111 S111

1/16 1/16

CK12 CK12

STC4 STC4

5/32 5/32

CRGNL864 CRGNL244F

1.50 1.00 1.125 8.00 1.00 1.50 1.50 2.000 8.00 1.25

RN.42 RNG45

SM218 SM45

S111 S111

1/16 1/16

CK12 CK12

STC4 STC4

5/32 5/32

CRGNL206 CRGNL246

1.25 1.25 1.500 6.00 1.38 1.50 1.50 2.000 8.00 1.38

RNG65 RNG65

SM456 SM456

SL344 SL344

— —

CK12 CK12

STC4 STC4

5/32 5/32

CRGNL208 CRGNL248

1.25 1.25 1.500 6.00 1.56 1.50 1.50 2.000 8.00 1.56

RNG84 RNG84

SM444 SM444

SL344 SL344

— —

CK24 CK24

STC19 STC19

3/16 3/16

See page B124 for inserts.

CRGN-P

catalog number right hand CRGNRP163D CRGNRP164D CRGNRP204D left hand CRGNLP163D CRGNLP164D CRGNLP204D

www.kennametal.com

gage insert

shim

6.00

.75

RNM32

6.00 6.00

1.13 1.13

RN.42 RN.42

6.00

.75

6.00 6.00

1.13 1.13

1.00

1.250

1.00 1.25

1.250 1.500

1.00

1.250

1.00 1.25

1.250 1.500

shim screw

clamp

clamp screw

hex (inch)

SM434

SL344

CK20

STC20

1/8

SM437 SM437

SL344 SL344

CK28 CK28

STC4 STC4

5/32 5/32

RNM32

SM434

SL344

CK20

STC20

1/8

RN.42 RN.42

SM437 SM437

SL344 SL344

CK28 CK28

STC4 STC4

5/32 5/32

C39

O.D./I.D. Tooling

CRGN

Kendex™ Toolholders Kendex Negative Inserts

See pages B125–B126 for inserts.

O.D./I.D. Tooling

CSDN 45°

catalog number CSDNN124 CSDNN164

H B F L1 L2 .75 .75 .375 4.50 1.31 1.00 1.00 .500 6.00 1.31

gage insert SN.422 SN.422

shim SM47 SM47

shim screw S111 S111

hex (inch) 1/16 1/16

clamp CK10 CK9

clamp screw STC4 STC4

hex (inch) 5/32 5/32

CSDNN866

1.50 1.00 .500 8.00 1.75

SN.633

SM216

S125

3/32

CK24

STC19

3/16

See pages B125–B126 for inserts.

CSKN 15°

catalog number right hand CSKNR123 CSKNR856

C40

L1A

gage insert

shim

shim screw

.75

.830

4.50

.88

.09

1.25 1.00 1.190 6.00 1.50

.18

hex (inch)

clamp

clamp screw

hex (inch)

SN.322

SM87

SN.633

SM216

SL344

—

CK7

STC5

3/32

S125

3/32

CK9

STC4

5/32

www.kennametal.com

Kendex™ Toolholders Kendex Negative Inserts

See pages B125–B126 for inserts.

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

4.50 1.19 .12

SN.422

SM47

S111

1/16

CK10

STC4

5/32

1.00 1.00 1.048 6.00 1.19 .12 1.25 1.00 1.060 6.00 1.44 .18

SN.422 SN.633

SM47 SM216

S111 S125

1/16 3/32

CK9 CK9

STC4 STC4

5/32 5/32

catalog number right hand CSRNR124 CSRNR164 CSRNR856

.75

.855

See pages B125–B126 for inserts.

CSSN 45°

catalog number right hand CSSNR164

FA L1A

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

1.00 1.00 .720 6.00 1.31 .34 .33

SN.422

SM47

S111

1/16

CK9

STC4

5/32

left hand CSSNL164

1.00 1.00 .720 6.00 1.31 .34 .33

SN.422

SM47

S111

1/16

CK9

STC4

5/32

www.kennametal.com

C41

O.D./I.D. Tooling

CSRN 15°

Kendex™ Toolholders Kendex Negative Inserts

See page B126 for inserts.

O.D./I.D. Tooling

CTAN 0°

catalog number right hand CTANR082

.50

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

.50

4.500

.75

TN.221

SM88

SL344

—

CK19

STC5

3/32

CTANR123 CTANR164

.75 .75 .75 1.00 1.00 1.00

4.500 6.000

1.06 1.19

TN.322 TN.432

SM48 SM26

S111 S125

1/16 3/32

CK10 CK9

STC4 STC4

5/32 5/32

left hand CTANL164

1.00 1.00 1.00

6.000

1.19

TN.432

SM26

S125

3/32

CK9

STC4

5/32

hex (inch)

clamp

clamp screw

hex (inch)

See page B126 for inserts.

CTBN 15°

catalog number right hand CTBNR123 CTBNR204 CTBNR864 left hand CTBNL123 CTBNL204

gage insert

4.50 1.19 .15

TN.322

SM48

S111

1/16

CK10

STC4

5/32

1.25 1.25 1.040 6.00 1.25 .20 1.50 1.00 .790 8.00 1.25 .20

TN.432 TN.432

SM26 SM26

S125 S125

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

.75

.600

.75

.600

shim

shim screw

4.50 1.19 .15

TN.322

SM48

S111

1/16

CK10

STC4

5/32

1.25 1.25 1.040 6.00 1.25 .20

TN.432

SM26

S125

3/32

CK9

STC4

5/32

hex (inch)

clamp

clamp screw

hex (inch) 5/32

See page B126 for inserts.

CTFN 0°

catalog number right hand CTFNR123

.75

CTFNR853

1.25

1.00

gage insert

shim

shim screw

1.000

4.50 .88

TN.322

SM48

S111

1/16

CK10

STC4

1.250

6.00 .88

TN.322

SM48

S111

1/16

CK9

STC4

5/32 (continued)

C42

www.kennametal.com

Kendex™ Toolholders Kendex Negative Inserts (CTFN 0° continued)

catalog number left hand

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

.75

1.000

4.50 .88

TN.322

SM48

S111

1/16

CK10

STC4

5/32

CTFNL163

1.00

1.250

6.00 .88

TN.322

SM48

S111

1/16

CK9

STC4

5/32

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

.75

O.D./I.D. Tooling

CTFNL123

See page B126 for inserts.

CTGN 0°

catalog number right hand CTGNR123

.75

1.000

4.50 1.00

TN.322

SM48

S111

1/16

CK10

STC4

5/32

CTGNR163 CTGNR164

1.00 1.00 1.00 1.00

1.250 1.250

6.00 1.00 6.00 1.19

TN.322 TN.432

SM48 SM26

S111 S125

1/16 3/32

CK9 CK9

STC4 STC4

5/32 5/32

CTGNR204 left hand

1.25 1.25

1.500

6.00 1.19

TN.432

SM26

S125

3/32

CK9

STC4

5/32

CTGNL123 CTGNL163

.75 .75 1.00 1.00

1.000 1.250

4.50 1.00 6.00 1.00

TN.322 TN.322

SM48 SM48

S111 S111

1/16 1/16

CK10 CK9

STC4 STC4

5/32 5/32

CTGNL164

1.00 1.00

1.250

6.00 1.19

TN.432

SM26

S125

3/32

CK9

STC4

5/32

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

See page B84 for inserts.

CCLP -5°

catalog number right hand CCLPR084V

.50

.750

3.50 1.00

CP.422

SM369

S19

1/16

CK7

STC9

3/32

CCLPR124B CCLPR164C

.75 .75 1.00 1.00

1.000 1.250

4.50 1.25 5.00 1.25

CP.422 CP.422

SM369 SM369

S111 S111

1/16 1/16

CK13 CK12

STC8 STC4

5/32 5/32

CCLPR164D left hand

1.00 1.00

1.250

6.00 1.25

CP.422

SM369

S111

1/16

CK12

STC4

5/32

CCLPL124B CCLPL164C

.75 .75 1.00 1.00

1.000 1.250

4.50 1.25 5.00 1.25

CP.422 CP.422

SM369 SM369

S111 S111

1/16 1/16

CK13 CK12

STC8 STC4

5/32 5/32

www.kennametal.com

C43

Kendex™ Toolholders Kendex Positive Inserts

See pages B85–B86 and B129–B130 for inserts.

O.D./I.D. Tooling

CSDP 45°

F L1 L2 .312 4.50 .94 .375 4.50 1.38

gage insert SP.322 SP.422

shim SM120 SM40

shim screw SL344 S111

hex (inch) — 1/16

clamp CK7 CK10

clamp screw STC5 STC8

hex (inch) 3/32 5/32

CSDPN644 CSDPN164

1.00 .75 .375 6.00 1.38 1.00 1.00 .500 6.00 1.38

SP.422 SP.422

SM40 SM40

S111 S111

1/16 1/16

CK9 CK9

STC4 STC4

5/32 5/32

CSDPN856

1.25 1.00 .500 6.00 1.82

SP.633

SM36

S125

3/32

CK29

STC19

3/16

catalog number CSDPN103 CSDPN124

H .63 .75

B .63 .75

See pages B85–B86 and B129–B130 for inserts.

CSKP 15°

C44

catalog number right hand CSKPR164D left hand CSKPL164D

L1A

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

1.00 1.00 1.250 6.00 1.13

.12

SP.422

SM40

S111

1/16

CK9

STC4

5/32

1.00 1.00 1.250 6.00 1.13

.12

SP.422

SM40

S111

1/16

CK9

STC4

5/32

www.kennametal.com

Kendex™ Toolholders Kendex Positive Inserts

See pages B85–B86 and B129–B130 for inserts.

catalog number right hand CSRPR083B

.50

.605

4.50

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

.88 .09

SP.322

SM120

SL344

—

CK7

STC9

3/32

CSRPR124B CSRPR164D

.75 .75 .855 4.50 1.19 .12 1.00 1.00 1.048 6.00 1.19 .12

SP.422 SP.422

SM40 SM40

S111 S111

1/16 1/16

CK10 CK9

STC8 STC4

5/32 5/32

CSRPR856D CSRPR866E

1.25 1.00 1.060 6.00 1.50 .18 1.50 1.00 1.060 7.00 1.50 .18

SP.633 SP.633

SM36 SM36

S125 S125

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

left hand CSRPL083B

.88 .09

SP.322

SM120

SL344

—

CK7

STC9

3/32

CSRPL124B CSRPL164D

.75 .75 .855 4.50 1.19 .12 1.00 1.00 1.048 6.00 1.19 .12

.50

.605

4.50

SP.422 SP.422

SM40 SM40

S111 S111

1/16 1/16

CK10 CK9

STC8 STC4

5/32 5/32

CSRPL856D CSRPL866E

1.25 1.00 1.060 6.00 1.50 .18 1.50 1.00 1.060 7.00 1.50 .18

SP.633 SP.633

SM36 SM36

S125 S125

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

clamp screw

hex (inch)

See pages B85–B86 and B129–B130 for inserts.

CSSP 45°

catalog number right hand CSSPR164D

FA L1A

gage insert

shim

shim screw

hex (inch)

clamp

1.00 1.00 1.170 6.00 1.44 .34 .35

SP.422

SM40

S111

1/16

CK9

STC4

5/32

CSSPR854D CSSPR856D

1.25 1.00 1.170 6.00 1.44 .34 .35 1.25 1.00 1.020 6.00 1.50 .48 .53

SP.422 SP.633

SM40 SM36

S111 S125

1/16 3/32

CK9 CK9

STC4 STC4

5/32 5/32

left hand CSSPL164D

1.00 1.00 1.170 6.00 1.44 .34 .35

SP.422

SM40

S111

1/16

CK9

STC4

5/32

CSSPL854D CSSPL856D

1.25 1.00 1.170 6.00 1.44 .34 .35 1.25 1.00 1.020 6.00 1.50 .48 .53

SP.422 SP.633

SM40 SM36

S111 S125

1/16 3/32

CK9 CK9

STC4 STC4

5/32 5/32

www.kennametal.com

C45

O.D./I.D. Tooling

CSRP 15°

Kendex™ Toolholders Kendex Positive Inserts

See pages B86–B87 and B130 for inserts.

O.D./I.D. Tooling

CTAP 0°

catalog number right hand CTAPR082B

gage insert

.50

.500

4.50

.75

CTAPR102B CTAPR123B

.63 .75

.625 .750

4.50 .75 4.50 1.06

1.00 1.00 1.25 1.00

1.000 1.000

6.00 1.06 6.00 1.13

CTAPR163D CTAPR854D left hand CTAPL082B

.50

4.50

shim

shim screw

hex (inch)

TP.221

SM119

SL344

—

CK19

STC9

3/32

TP.221 TP.322

SM119 SM41

SL344 S111

— 1/16

CK19 CK10

STC5 STC8

3/32 5/32

TP.322 TP.432

SM41 SM37

S111 S125

1/16 3/32

CK9 CK9

STC4 STC4

5/32 5/32

clamp

clamp screw

hex (inch)

.50

.500

.75

TP.221

SM119

SL344

—

CK19

STC9

3/32

CTAPL123B CTAPL163D

.75 .75 1.00 1.00

.750 1.000

4.50 1.06 6.00 1.06

TP.322 TP.322

SM41 SM41

S111 S111

1/16 1/16

CK10 CK9

STC8 STC4

5/32 5/32

CTAPL854D

1.25 1.00

1.000

6.00 1.13

TP.432

SM37

S125

3/32

CK9

STC4

5/32

clamp screw

hex (inch)

See pages B86–B87 and B130 for inserts.

CTBP 15°

catalog number right hand CTBPR123B

C46

gage insert

shim

shim screw

hex (inch)

clamp

.75

.75 .600 4.50 1.19 .15

TP.322

SM41

S111

1/16

CK10

STC8

5/32

CTBPR163D left hand

1.00 1.00 .850 6.00 1.19 .15

TP.322

SM41

S111

1/16

CK9

STC4

5/32

CTBPL123B CTBPL163D

.75 .75 .600 4.50 1.19 .15 1.00 1.00 .850 6.00 1.19 .15

TP.322 TP.322

SM41 SM41

S111 S111

1/16 1/16

CK10 CK9

STC8 STC4

5/32 5/32

www.kennametal.com

Kendex™ Toolholders Kendex Positive Inserts

See pages B86–B87 and B130 for inserts.

catalog number right hand CTCPR123B

.75

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

.75

1.000

4.50 1.50

TP.322

SM41

S111

1/16

CK23

STC11

1/8

CTCPR163C CTCPR164C

1.00 1.00 1.00 1.00

1.250 1.250

5.00 1.50 5.00 1.63

TP.322 TP.432

SM41 SM37

S111 S125

1/16 3/32

CK23 CK13

STC11 STC4

1/8 5/32

CTCPR164D CTCPR204D

1.00 1.00 1.25 1.25

1.250 1.500

6.00 1.63 6.00 1.63

TP.432 TP.432

SM37 SM37

S125 S125

3/32 3/32

CK13 CK13

STC4 STC4

5/32 5/32

CTCPR244D CTCPR205D

1.50 1.50 1.25 1.25

2.000 1.500

6.00 3.00 6.00 1.75

TP.432 TP.543

SM37 SM99

S125 S132

3/32 1/8

CK13 CK29

STC4 STC19

5/32 3/16

left hand CTCPL123B

.75

1.000

4.50 1.50

TP.322

SM41

S111

1/16

CK23

STC11

1/8

CTCPL163C CTCPL164C

1.00 1.00 1.00 1.00

.75

1.250 1.250

5.00 1.50 5.00 1.63

TP.322 TP.432

SM41 SM37

S111 S125

1/16 3/32

CK23 CK13

STC11 STC4

1/8 5/32

CTCPL164D CTCPL204D

1.00 1.00 1.25 1.25

1.250 1.500

6.00 1.63 6.00 1.63

TP.432 TP.432

SM37 SM37

S125 S125

3/32 3/32

CK13 CK13

STC4 STC4

5/32 5/32

CTCPL244D CTCPL205D

1.50 1.50 1.25 1.25

2.000 1.500

6.00 3.00 6.00 1.75

TP.432 TP.543

SM37 SM99

S125 S132

3/32 1/8

CK13 CK29

STC4 STC19

5/32 3/16

See pages B86–B87 and B130 for inserts.

CTCPN 0°

catalog number CTCPN443 CTCPN124

H B F L1 1.00 .50 .542 8.00 .75 .75 .782 6.00

L2 1.19 1.31

gage insert TP.322 TP.432

shim SM41 SM37

shim screw S111 S125

hex (inch) 1/16 3/32

clamp CK23 CK13

clamp screw STC11 STC8

hex (inch) 1/8 5/32

CTCPN644 CTCPN664

1.00 .75 .782 8.00 1.50 .75 .782 8.00

1.31 1.31

TP.432 TP.432

SM37 SM37

S125 S125

3/32 3/32

CK13 CK13

STC4 STC4

5/32 5/32

www.kennametal.com

C47

O.D./I.D. Tooling

CTCP 0°

Kendex™ Toolholders Kendex Positive Inserts

See pages B86–B87 and B130 for inserts.

O.D./I.D. Tooling

CTEP 30°

catalog number right hand CTEPR102B

.63

.63 .450 4.50

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

.88 .20

TP.221

SM119

SL344

—

CK19

STC5

3/32

CTEPR123B CTEPR163D

.75 .75 .460 4.50 1.25 .28 1.00 1.00 .700 6.00 1.25 .28

TP.322 TP.322

SM41 SM41

S111 S111

1/16 1/16

CK10 CK9

STC8 STC4

5/32 5/32

CTEPR854D left hand

1.25 1.00 .610 6.00 1.31 .39

TP.432

SM37

S125

3/32

CK9

STC4

5/32

.63 .450 4.50 .88 .20 .75 .460 4.50 1.25 .28

TP.221 TP.322

SM119 SM41

SL344 S111

— 1/16

CK19 CK10

STC5 STC8

3/32 5/32

1.00 1.00 .700 6.00 1.25 .28 1.25 1.00 .610 6.00 1.31 .39

TP.322 TP.432

SM41 SM37

S111 S125

1/16 3/32

CK9 CK9

STC4 STC4

5/32 5/32

hex (inch)

clamp

clamp screw

hex (inch)

CTEPL102B CTEPL123B CTEPL163D CTEPL854D

.63 .75

See pages B86–B87 and B130 for inserts.

CTFP 0°

C48

gage insert

shim

shim screw

3.50

.56

TP.221

SM119

SL344

—

CK19

STC9

3/32

4.50 5.00

1.13 1.13

TP.322 TP.322

SM41 SM41

S111 S111

1/16 1/16

CK10 CK9

STC8 STC4

5/32 5/32

1.250 1.250

6.00 5.00

1.13 1.25

TP.322 TP.432

SM41 SM37

S111 S125

1/16 3/32

CK9 CK9

STC4 STC4

5/32 5/32

1.00 1.00

1.250 1.250

6.00 6.00

1.25 1.25

TP.432 TP.432

SM37 SM37

S125 S125

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

1.25

1.500

6.00

1.25

TP.432

SM37

S125

3/32

CK9

STC4

5/32

CTFPL082V CTFPL123B

.50 .75

.750 1.000

3.50 4.50

.56 1.13

TP.221 TP.322

SM119 SM41

SL344 S111

— 1/16

CK19 CK10

STC9 STC8

3/32 5/32

CTFPL163D CTFPL164D

1.00 1.00

1.250 1.250

6.00 6.00

1.13 1.25

TP.322 TP.432

SM41 SM37

S111 S125

1/16 3/32

CK9 CK9

STC4 STC4

5/32 5/32

CTFPL854D CTFPL204D

1.25 1.25

1.00 1.25

1.250 1.500

6.00 6.00

1.25 1.25

TP.432 TP.432

SM37 SM37

S125 S125

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

catalog number right hand CTFPR082V

.50

CTFPR123B CTFPR163C

.75 1.00

.50

.750

.75 1.00

1.000 1.250

CTFPR163D CTFPR164C

1.00 1.00

CTFPR164D CTFPR854D

1.00 1.25

CTFPR204D left hand

www.kennametal.com

Kendex™ Toolholders Kendex Positive Inserts

See pages B86–B87 and B130 for inserts.

catalog number right hand CTGPR082B

gage insert

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

.50

.750

4.50

.75

TP.221

SM119

SL344

—

CK19

STC9

3/32

CTGPR102B CTGPR123A

.63 .75

.875 1.000

4.50 .75 4.00 1.13

TP.221 TP.322

SM119 SM41

SL344 S111

— 1/16

CK19 CK10

STC9 STC8

3/32 5/32

CTGPR123B CTGPR163C

.75 .75 1.00 1.00

1.000 1.250

4.50 1.13 5.00 1.13

TP.322 TP.322

SM41 SM41

S111 S111

1/16 1/16

CK10 CK9

STC8 STC4

5/32 5/32

CTGPR163D CTGPR164C

1.00 1.00 1.00 1.00

1.250 1.250

6.00 1.13 5.00 1.25

TP.322 TP.432

SM41 SM37

S111 S125

1/16 3/32

CK9 CK9

STC4 STC4

5/32 5/32

CTGPR164D CTGPR854D

1.00 1.00 1.25 1.00

1.250 1.250

6.00 1.25 6.00 1.25

TP.432 TP.432

SM37 SM37

S125 S125

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

CTGPR204D CTGPR205D

1.25 1.25 1.25 1.25

1.500 1.500

6.00 1.25 6.00 1.38

TP.432 TP.543

SM37 SM99

S125 S132

3/32 1/8

CK9 CK24

STC4 STC19

5/32 3/16

4.50

left hand CTGPL102B

.63

.875

.75

TP.221

SM119

SL344

—

CK19

STC9

3/32

CTGPL123B CTGPL163C

.75 .75 1.00 1.00

1.000 1.250

4.50 1.13 5.00 1.13

TP.322 TP.322

SM41 SM41

S111 S111

1/16 1/16

CK10 CK9

STC8 STC4

5/32 5/32

CTGPL163D CTGPL164C

1.00 1.00 1.00 1.00

1.250 1.250

6.00 1.13 5.00 1.25

TP.322 TP.432

SM41 SM37

S111 S125

1/16 3/32

CK9 CK9

STC4 STC4

5/32 5/32

CTGPL164D CTGPL204D

1.00 1.00 1.25 1.25

1.250 1.500

6.00 1.25 6.00 1.25

TP.432 TP.432

SM37 SM37

S125 S125

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

CTGPL205D

1.25 1.25

1.500

6.00 1.38

TP.543

SM99

S132

1/8

CK24

STC19

3/16

www.kennametal.com

.63

C49

O.D./I.D. Tooling

CTGP 0°

Screw-On Toolholders Screw-On Inserts

See pages B88–B91 for inserts.

O.D./I.D. Tooling

SCAC 0°

catalog number right hand SCACR052D

.31

.312

SCACR062D SCACR083D

.38 .50

.375 .500

SCACR103B left hand

.63

.625

SCACL052D SCACL062D

.31 .38

SCACL083D SCACL103B

.50 .63

gage insert

shim

shim screw

hex

insert screw

Torx

6.00

.44

.09

CC..2151

—

MS1153

6.00 6.00

.44 .62

— —

CC..2151 CC..3252

— —

MS1153 MS1155

T7 T15

4.50

.62

—

CC..3252

SKCP343

SRS3

3.5 mm

MS1156

T15

.312 .375

6.00 6.00

.44 .44

.09 —

CC..2151 CC..2151

— —

MS1153 MS1153

T7 T7

.500 .625

6.00 4.50

.62 .62

— —

CC..3252 CC..3252

— SKCP343

— SRS3

— 3.5 mm

MS1155 MS1156

T15 T15

γO°

λS°

gage insert

See pages B92–B95 for inserts.

SCAP 0°

C50

insert screw

catalog number right hand SCAPR052D

.31

.312

6.000

.44

3.50

.06

CP..2151

MS1153

SCAPR062D SCAPR083D

.38 .50

.375 .500

6.000 6.000

.44 .62

3.50 3.00

3.50 4.00

— —

CP..2151 CP..3252

MS1153 MS1027

T7 T9

left hand SCAPL052D

.31

.312

6.000

.44

3.50

.06

CP..2151

MS1153

SCAPL062D SCAPL083D

.38 .50

.375 .500

6.000 6.000

.44 .62

3.50 3.00

3.50 4.00

— —

CP..2151 CP..3252

MS1153 MS1027

T7 T9

Torx

www.kennametal.com

Screw-On Toolholders Screw-On Inserts

See pages B88–B91 for inserts.

catalog number right hand SCFCR082

gage insert

insert screw

Torx

.50

.625

3.50

.50

CC..2151

MS1153

left hand SCFCL082

.50

.625

3.50

.50

CC..2151

MS1153

gage insert

insert screw

Torx

See pages B92–B95 for inserts.

SCFP 0°

catalog number right hand SCFPR062

.38

.500

2.50

.44

CP..2151

MS1153

SCFPR083V left hand

.50

.625

3.50

.62

CP..3252

MS1027

SCFPL083V

.50

.625

3.50

.62

CP..3252

MS1027

NOTE: ANSI/ISO compatible 60° countersunk hole insert. This tool will also accept CPMT/CPGM/CPGT/CPGW-21.5_ inserts. 90° countersunk hole insert (i.e., CPGM/CPGB-32.5_). ANSI/ISO compatible 60° countersunk hole inserts (i.e., CPMT/CPGT/CPGW-32.5_) do not fit this tool.

www.kennametal.com

C51

O.D./I.D. Tooling

SCFC 0°

Screw-On Toolholders Screw-On Inserts

See pages B88–B91 for inserts.

O.D./I.D. Tooling

SCGC 0°

catalog number right hand SCGCR062

gage insert

.38

.500

2.50

.50

CC..2151

—

MS1153

SCGCR082 SCGCR102

.50 .63

.625 .750

3.50 4.00

.50 .50

CC..2151 CC..2151

— —

MS1153 MS1153

T7 T7

SCGCR103 SCGCR123

.63 .75

.750 1.000

4.00 4.50

.62 .62

CC..3252 CC..3252

SKCP343 SKCP343

SRS3 SRS3

3.5 mm 3.5 mm

MS1156 MS1156

T15 T15

SCGCR163 left hand

1.00

1.250

6.00

.62

CC..3252

SKCP343

SRS3

3.5 mm

MS1156

T15

SCGCL103 SCGCL123

.63 .75

.750 1.000

4.00 4.50

.62 .62

CC..3252 CC..3252

SKCP343 SKCP343

SRS3 SRS3

3.5 mm 3.5 mm

MS1156 MS1156

T15 T15

SCGCL163

1.00

1.250

6.00

.62

CC..3252

SKCP343

SRS3

3.5 mm

MS1156

T15

shim screw

hex

insert screw

Torx

shim

shim screw

hex

insert screw

Torx

See pages B92–B95 for inserts.

SCGP 0°

catalog number right hand SCGPR062 SCGPR083V SCGPR123B

gage insert

shim

2.50

.44

CP..2151

—

MS1153

3.50 4.50

.62 .62

CP..3252 CP..3252

— SM417

— MS1028

— 3/32 IN

MS1027 MS1027

T9 T9

.38

.500

.50 .75

.625 1.000

left hand SCGPL062

.38

.500

2.50

.44

CP..2151

—

MS1153

SCGPL083V SCGPL123B

.50 .75

.625 1.000

3.50 4.50

.62 .62

CP..3252 CP..3252

— SM417

— MS1028

— 3/32 IN

MS1027 MS1027

T9 T9

C52

www.kennametal.com

Screw-On Toolholders Screw-On Inserts

See pages B88–B91 for inserts.

gage insert

shim

shim screw

.375

2.50

.50

CC..2151

—

.500 .625

2.50 3.50

.50 .50

CC..2151 CC..2151

— —

.750 .750

4.00 4.00

.50 .62

CC..2151 CC..3252

— SKCP343

— SRS3

.75 1.00

1.000 1.250

4.50 6.00

.62 .62

CC..3252 CC..3252

SKCP343 SKCP343

.75 1.00

1.000 1.250

4.50 6.00

.75 .75

CC..432 CC..432

catalog number right hand SCLCR052

.31

SCLCR062 SCLCR082

.38 .50

SCLCR102 SCLCR103

.63 .63

SCLCR123 SCLCR163

.75 1.00

SCLCR124B SCLCR164D

.75 1.00

insert screw

Torx

—

MS1153

— —

MS1153 MS1153

T7 T7

— 3.5 mm

MS1153 MS1156

T7 T15

SRS3 SRS3

3.5 mm 3.5 mm

MS1156 MS1156

T15 T15

SKCP453 SKCP453

SRS4 SRS4

4 mm 4 mm

MS1158 MS1158

T15 T15

hex

left hand SCLCL052

.31

.375

2.50

.50

CC..2151

—

MS1153

SCLCL062 SCLCL082

.38 .50

.500 .625

2.50 3.50

.50 .50

CC..2151 CC..2151

— —

MS1153 MS1153

T7 T7

SCLCL102 SCLCL103

.63 .63

.750 .750

4.00 4.00

.50 .62

CC..2151 CC..3252

— SKCP343

— SRS3

— 3.5 mm

MS1153 MS1156

T7 T15

SCLCL123 SCLCL163

.75 1.00

1.000 1.250

4.50 6.00

.62 .62

CC..3252 CC..3252

SKCP343 SKCP343

SRS3 SRS3

3.5 mm 3.5 mm

MS1156 MS1156

T15 T15

SCLCL124B SCLCL164D

.75 1.00

1.000 1.250

4.50 6.00

.75 .75

CC..432 CC..432

SKCP453 SKCP453

SRS4 SRS4

4 mm 4 mm

MS1158 MS1158

T15 T15

shim

shim screw

hex

insert screw

Torx

See pages B88–B91 for inserts.

SCLC-F -5°

catalog number right hand SCLCRF062D

gage insert

.38

.375

6.00

.50

—

CC..2151

—

MS1153

SCLCRF082D SCLCRF083D

.50 .50

.500 .500

6.00 6.00

.50 .62

— .09

CC..2151 CC..3252

— —

MS1153 MS1155

T7 T15

SCLCRF523Z SCLCRF103B

.50 .63

.63 .63

.625 .625

3.25 4.50

.62 .62

— —

CC..3252 CC..3252

— SKCP343

— SRS3

— 3.5 mm

MS1155 MS1156

T15 T15

left hand SCLCLF062D

.38

.375

6.00

.50

—

CC..2151

—

MS1153

SCLCLF082D SCLCLF083D

.50 .50

.500 .500

6.00 6.00

.50 .62

— .09

CC..2151 CC..3252

— —

MS1153 MS1155

T7 T15

SCLCLF523Z SCLCLF103B

.50 .63

.63 .63

.625 .625

3.25 4.50

.62 .62

— —

CC..3252 CC..3252

— SKCP343

— SRS3

— 3.5 mm

MS1155 MS1156

T15 T15

www.kennametal.com

C53

O.D./I.D. Tooling

SCLC -5°

Screw-On Toolholders Screw-On Inserts

See pages B92–B95 for inserts.

O.D./I.D. Tooling

SCLP -5°

catalog number right hand SCLPR062 SCLPR083V SCLPR123B

gage insert

2.50

.44

CP..2151

3.50 4.50

.62 .62

CP..3252 CP..3252

.500

2.50

.44

CP..2151

.625 1.000

3.50 4.50

.62 .62

CP..3252 CP..3252

.38

.500

.50 .75

.625 1.000

left hand SCLPL062

.38

SCLPL083V SCLPL123B

.50 .75

shim screw

hex

insert screw

Torx

—

MS1153

— SM417

— MS1028

— 3/32 IN

MS1027 MS1027

T9 T9

—

MS1153

— SM417

— MS1028

— 3/32 IN

MS1027 MS1027

T9 T9

shim

See pages B92–B95 for inserts.

SCLP-F -5°

catalog number right hand SCLPRF062D

gage insert

insert screw

Torx

.38

.375

6.00

.44

CP..2151

MS1153

SCLPRF083D left hand

.50

.500

6.00

.62

CP..3252

MS1027

SCLPLF062D SCLPLF083D

.38 .50

.375 .500

6.00 6.00

.44 .62

CP..2151 CP..3252

MS1153 MS1027

T7 T9

C54

www.kennametal.com

Screw-On Toolholders Screw-On Inserts

See pages B88–B91 for inserts.

catalog number SCMCN062 SCMCN082

H .38 .50

B .38 .50

F .188 .250

L1 2.50 3.50

L2 .50 .50

gage insert CC..2151 CC..2151

shim — —

shim screw — —

hex — —

insert screw MS1153 MS1153

Torx T7 T7

SCMCN083 SCMCN103

.50 .63

.250 .312

3.50 4.00

.62 .62

CC..3252 CC..3252

— SKCP343

— SRS3

— 3.5 mm

MS1155 MS1156

T15 T15

SCMCN123 SCMCN163

.75 1.00

.375 .500

4.50 6.00

.62 .62

CC..3252 CC..3252

SKCP343 SKCP343

SRS3 SRS3

3.5 mm 3.5 mm

MS1156 MS1156

T15 T15

catalog number SCMPN062 SCMPN083V

H .38 .50

B .38 .50

F .188 .250

L1 2.50 3.50

L2 .44 .62

gage insert CP..2151 CP..3252

shim — —

shim screw — —

hex — —

insert screw MS1153 MS1027

Torx T7 T9

SCMPN123B

.75

.375

4.50

.75

CP..3252

SM417

MS1028

3/32 IN

MS1027

shim screw

hex

insert screw

Torx

See pages B92–B95 for inserts.

SCMP 40°

See pages B88–B91 for inserts.

SCRC 15°

catalog number right hand SCRCR083

gage insert

shim

.50

.548

3.50

.62

.09

CC..3252

—

MS1155

T15

SCRCR103 left hand

.63

.673

4.00

.62

.09

CC..3252

SKCP343

SRS3

3.5 mm

MS1156

T15

SCRCL083

.50

.548

3.50

.62

.09

CC..3252

—

MS1155

T15

www.kennametal.com

C55

O.D./I.D. Tooling

SCMC 40°

Screw-On Toolholders Screw-On Inserts

5˚

See pages B92–B95 for inserts.

O.D./I.D. Tooling

SCRP 15°

catalog number right hand SCRPR062

gage insert

insert screw

Torx

.38

.439

2.50

.44

.06

CP..2151

MS1153

SCRPR083V left hand

.50

.537

3.50

.62

.09

CP..3252

MS1027

SCRPL062 SCRPL083V

.38 .50

.439 .537

2.50 3.50

.44 .62

.06 .09

CP..2151 CP..3252

MS1153 MS1027

T7 T9

See pages B95–B98 for inserts.

SDAC 0°

C56

catalog number right hand SDACR062D

gage insert

shim

shim screw

hex

insert screw

Torx

.38

.375

6.00

.62

—

DC..2151

—

MS1153

SDACR082D SDACR103B

.50 .63

.500 .625

6.00 4.50

.62 .88

— —

DC..2151 DC..3252

— SKDP343

— SRS3

— 3.5 mm

MS1153 MS1156

T7 T15

SDACR083D left hand

.50

.500

6.00

.88

.06

DC..3252

—

MS1155

T15

SDACL062D SDACL082D

.38 .50

.375 .500

6.00 6.00

.62 .62

— —

DC..2151 DC..2151

— —

MS1153 MS1153

T7 T7

SDACL103B SDACL083D

.63 .50

.625 .500

4.50 6.00

.88 .88

— .06

DC..3252 DC..3252

SKDP343 —

SRS3 —

3.5 mm —

MS1156 MS1155

T15 T15

www.kennametal.com

Screw-On Toolholders Screw-On Inserts

See pages B95–B98 for inserts.

catalog number right hand SDJCR062 SDJCR082 SDJCR102 SDJCR083 SDJCR103 SDJCR123 SDJCR163

.38

.50 .63

.50 .63 .75 1.00

gage insert

shim

shim screw

hex

insert screw

Torx

.500

2.50

.62

DC..2151

—

MS1153

.625 .750

3.50 4.00

.62 .62

DC..2151 DC..2151

— —

MS1153 MS1153

T7 T7

.50 .63

.625 .750

3.50 4.00

.88 .88

DC..3252 DC..3252

— SKDP343

— SRS3

— 3.5 mm

MS1155 MS1156

T15 T15

.75 1.00

1.000 1.250

4.50 6.00

.88 .88

DC..3252 DC..3252

SKDP343 SKDP343

SRS3 SRS3

3.5 mm 3.5 mm

MS1156 MS1156

T15 T15

left hand SDJCL062

.38

.500

2.50

.62

DC..2151

—

MS1153

SDJCL082 SDJCL102

.50 .63

.625 .750

3.50 4.00

.62 .62

DC..2151 DC..2151

— —

MS1153 MS1153

T7 T7

SDJCL083 SDJCL103

.50 .63

.625 .750

3.50 4.00

.88 .88

DC..3252 DC..3252

— SKDP343

— SRS3

— 3.5 mm

MS1155 MS1156

T15 T15

SDJCL123 SDJCL163

.75 1.00

1.000 1.250

4.50 6.00

.88 .88

DC..3252 DC..3252

SKDP343 SKDP343

SRS3 SRS3

3.5 mm 3.5 mm

MS1156 MS1156

T15 T15

hex

insert screw

Torx

See pages B95–B98 for inserts.

SDJC-F -3°

catalog number right hand SDJCRF062D

gage insert

.38

.375

6.00

.62

SDJCRF082D SDJCRF103B

.50 .63

.500 .625

6.00 4.50

.62 .88

SDJCRF083D left hand

.50

.500

6.00

SDJCLF062D SDJCLF082D

.38 .50

.375 .500

SDJCLF103B SDJCLF083D

.63 .50

.625 .500

www.kennametal.com

shim

shim screw

DC..2151

—

MS1153

DC..2151 DC..3252

— SKDP343

— SRS3

— 3.5 mm

MS1153 MS1156

T7 T15

.88

DC..3252

—

MS1155

T15

6.00 6.00

.62 .62

DC..2151 DC..2151

— —

MS1153 MS1153

T7 T7

4.50 6.00

.88 .88

DC..3252 DC..3252

SKDP343 —

SRS3 —

3.5 mm —

MS1156 MS1155

T15 T15

C57

O.D./I.D. Tooling

SDJC -3°

Screw-On Toolholders Screw-On Inserts

See pages B95–B98 for inserts.

O.D./I.D. Tooling

SDPC 27.5°

catalog number SDPCN062D SDPCN082D

H .38 .50

B .38 .50

F .188 .250

L1 6.00 6.00

L2 .62 .62

gage insert DC..2151 DC..2151

shim — —

shim screw — —

hex — —

insert screw MS1153 MS1153

Torx T7 T7

SDPCN103B SDPCN083D

.63 .50

.312 .250

4.50 6.00

.88 .88

DC..3252 DC..3252

SKDP343 —

SRS3 —

3.5 mm —

MS1156 MS1155

T15 T15

See pages B95–B98 for inserts.

SDUC -3°

C58

catalog number right hand SDUCR082

gage insert

shim

shim screw

hex

insert screw

Torx

.50

.670

3.50

.50

—

DC..2151

—

MS1153

SDUCR102 SDUCR083

.63 .50

.795 .746

4.00 3.50

.50 .62

— .12

DC..2151 DC..3252

— —

MS1153 MS1155

T7 T15

SDUCR103 left hand

.63

.871

4.00

.62

—

DC..3252

SKDP343

SRS3

3.5 mm

MS1156

T15

SDUCL082 SDUCL102

.50 .63

.670 .795

3.50 4.00

.50 .50

— —

DC..2151 DC..2151

— —

MS1153 MS1153

T7 T7

SDUCL083 SDUCL103

.50 .63

.746 .871

3.50 4.00

.62 .62

.12 —

DC..3252 DC..3252

— SKDP343

— SRS3

— 3.5 mm

MS1155 MS1156

T15 T15

www.kennametal.com

Screw-On Toolholders Screw-On Inserts

catalog number right hand SFJFRA855S

gage insert

insert screw

Torx

1.25

1.00

.250

7.00

1.25

FF..210430R

MS1129

T15

left hand SFJFLA855S

1.25

1.00

.250

7.00

1.25

FF..210430L

MS1129

T15

See pages B100–B102 for inserts.

SRAC

gage insert

1.020

6.00

1.00

RC..215

—

MS1153

1.270 1.020

6.00 6.00

1.00 1.00

RC..215 RC..325

— SR3

MS1153 MS1156

T7 T15

1.270 1.020

6.00 6.00

1.00 1.00

RC..325 RC..43

SR3 SR4

MS1156 MS1158

T15 T15

1.25 1.50

1.270 1.520

6.00 6.00

1.00 1.00

RC..43 RC..43

SR4 SR4

MS1158 MS1158

T15 T15

1.00

1.020

6.00

1.00

RC..215

—

MS1153

1.25 1.00

1.270 1.020

6.00 6.00

1.00 1.00

RC..215 RC..325

— SR3

MS1153 MS1156

T7 T15

SRACL203D SRACL164D

1.25 1.00

1.270 1.020

6.00 6.00

1.00 1.00

RC..325 RC..43

SR3 SR4

MS1156 MS1158

T15 T15

SRACL204D SRACL244D

1.25 1.50

1.270 1.520

6.00 6.00

1.00 1.00

RC..43 RC..43

SR4 SR4

MS1158 MS1158

T15 T15

catalog number right hand SRACR162D

1.00

SRACR202D SRACR163D

1.25 1.00

SRACR203D SRACR164D

1.25 1.00

SRACR204D SRACR244D

1.25 1.50

left hand SRACL162D SRACL202D SRACL163D

www.kennametal.com

shim

insert screw

Torx

C59

O.D./I.D. Tooling

SFJF-S -3°

Screw-On Toolholders Screw-On Inserts

See pages B100–B102 for inserts.

O.D./I.D. Tooling

SRCC

catalog number right hand SRCCR122B

CD .81

SRCCR162D SRCCR123B

.81 1.02

SRCCR163D SRCCR203D

1.02 1.02

left hand SRCCL162D SRCCL123B SRCCL163D SRCCL203D

1.02

gage insert

shim

insert screw

4.50

1.66

RC..215

—

MS1153

6.00 4.50

1.66 1.88

RC..215 RC..325

— SR3

MS1153 MS1156

T7 T15

6.00 6.00

1.88 1.88

RC..325 RC..325

SR3 SR3

MS1156 MS1156

T15 T15

1.25

6.00

1.66

RC..215

—

MS1153

1.00 1.25

4.50 6.00

1.88 1.88

RC..325 RC..325

SR3 SR3

MS1156 MS1156

T15 T15

6.00

1.88

RC..325

SR3

MS1156

T15

.75

1.00

1.00 .75

1.25 1.00

1.00 1.25

1.25 1.50

.81

1.00

1.02 1.02

.75 1.00

1.25

1.50

Torx

See pages B100–B102 for inserts.

SRGC

C60

gage insert

shim

insert screw

catalog number right hand SRGCR122

Torx

.75

1.000

4.50

.40

RC..215

—

MS1153

SRGCR162 SRGCR163

1.00 1.00

1.250 1.250

6.00 6.00

.40 .41

RC..215 RC..325

— SR3

MS1153 MS1156

T7 T15

SRGCR203 left hand

1.25

1.500

6.00

.43

RC..325

SR3

MS1156

T15

SRGCL162 SRGCL203

1.00 1.25

1.250 1.500

6.00 6.00

.40 .43

RC..215 RC..325

— SR3

MS1153 MS1156

T7 T15

www.kennametal.com

Screw-On Toolholders Screw-On Inserts

See pages B100–B102 for inserts.

catalog number SROCN102 SROCN122

H .63 .75

B .63 .75

F .438 .500

L1 4.00 4.50

CD .62 .75

gage insert RC..215 RC..215

shim — —

insert screw MS1153 MS1153

Torx T7 T7

SROCN162 SROCN123

1.00 .75

.625 .562

6.00 4.50

1.00 .75

RC..215 RC..325

— SR3

MS1153 MS1156

T7 T15

SROCN163 SROCN203

1.00 1.25

.688 .812

6.00 6.00

1.00 1.25

RC..325 RC..325

SR3 SR3

MS1156 MS1156

T15 T15

See pages B105–B108 for inserts.

STAC 0°

catalog number right hand STACR062D

gage insert

shim

shim screw

hex

insert screw

Torx

.38

.375

6.00

.62

.09

TC..2151

—

MS1153

STACR082D STACR103B

.50 .63

.500 .625

6.00 4.50

.62 .75

— —

TC..2151 TC..3252

— SKTP343

— SRS3

— 3.5 mm

MS1153 MS1156

T7 T15

left hand STACL082D

.50

.500

6.00

.62

—

TC..2151

—

MS1153

STACL103B

.63

.625

4.50

.75

—

TC..3252

SKTP343

SRS3

3.5 mm

MS1156

T15

www.kennametal.com

C61

O.D./I.D. Tooling

SROC

Screw-On Toolholders Screw-On Inserts

See pages B105–B108 for inserts.

O.D./I.D. Tooling

STFC 0°

catalog number right hand STFCR062

gage insert

shim

shim screw

insert screw

hex

Torx

.38

.500

2.50

.62

TC..2151

—

MS1153

STFCR163 left hand

1.00

1.250

6.00

.75

TC..3252

SKTP343

SRS3

3.5 mm

MS1156

T15

STFCL062 STFCL123

.38 .75

.500 1.000

2.50 4.50

.62 .75

TC..2151 TC..3252

— SKTP343

— SRS3

— 3.5 mm

MS1153 MS1156

T7 T15

STFCL163

1.00

1.250

6.00

.75

TC..3252

SKTP343

SRS3

3.5 mm

MS1156

T15

See pages B109–B112 for inserts.

STFP 0°

catalog number right hand STFPR062

gage insert

insert screw

Torx

.38

.500

2.50

.44

TP..2151

MS1153

left hand STFPL062

.38

.500

2.50

.44

TP..2151

MS1153

NOTE: ANSI/ISO compatible 60° countersunk hole insert. This tool will also accept TPMT/TPGM/TPGT/TPGW-21.5_ inserts.

See pages B105–B108 for inserts.

STGC 0°

catalog number right hand STGCR062

gage insert

shim

shim screw

hex

insert screw

Torx

.38

.500

2.50

.62

TC..2151

—

STGCR082 STGCR103

.50 .63

.625 .750

3.50 4.00

.62 .75

TC..2151 TC..3252

— SKTP343

— SRS3

—

MS1153

— 3.5 mm

MS1153 MS1156

T7 T15

STGCR123 STGCR163

.75 1.00

1.000 1.250

4.50 6.00

.75 .75

TC..3252 TC..3252

SKTP343 SKTP343

SRS3 SRS3

3.5 mm 3.5 mm

MS1156 MS1156

T15 T15 (continued)

C62

www.kennametal.com

Screw-On Toolholders Screw-On Inserts (STGC 0° continued)

.38

STGCL082 STGCL103

.50 .63

STGCL123 STGCL163

.75 1.00

gage insert

shim

shim screw

insert screw

hex

Torx

.38

.500

2.50

.62

TC..2151

—

MS1153

.50 .63

.625 .750

3.50 4.00

.62 .75

TC..2151 TC..3252

— SKTP343

— SRS3

— 3.5 mm

MS1153 MS1156

T7 T15

1.000 1.250

4.50 6.00

.75 .75

TC..3252 TC..3252

SKTP343 SKTP343

SRS3 SRS3

3.5 mm 3.5 mm

MS1156 MS1156

T15 T15

O.D./I.D. Tooling

catalog number left hand STGCL062

See pages B109–B112 for inserts.

STGP 0°

catalog number right hand STGPR062

gage insert

insert screw

Torx

.38

.500

2.50

.56

TP..2151

MS1153

STGPR082V left hand

.50

.625

3.50

.56

TP..2151

MS1153

STGPL062 STGPL082V

.38 .50

.500 .625

2.50 3.50

.56 .56

TP..2151 TP..2151

MS1153 MS1153

T7 T7

NOTE: ANSI/ISO compatible 60° countersunk hole insert. This tool will also accept TPMT/TPGM/TPGT/TPGW-21.5_ inserts.

See pages B105–B108 for inserts.

STJC-F -3°

catalog number right hand STJCRF062D

gage insert

.38

.375

6.00

.62

.09

STJCRF082D STJCRF102B

.50 .63

.500 .625

6.00 4.50

.62 .62

— —

STJCRF103B left hand

.63

.625

4.50

.75

STJCLF062D

.38

.375

6.00

.62

www.kennametal.com

shim

shim screw

hex

insert screw

Torx

TC..2151

—

MS1153

TC..2151 TC..2151

— —

MS1153 MS1153

T7 T7

—

TC..3252

SKTP343

SRS3

3.5 mm

MS1156

T15

.09

TC..2151

—

MS1153

C63

Screw-On Toolholders Screw-On Inserts

See pages B113–B114 for inserts.

O.D./I.D. Tooling

SVAB -0°

catalog number right hand SVABR062D

gage insert

insert screw

Torx

.38

.375

6.00

.88

VB..221

MS1153

SVABR082D SVABR103B

.50 .63

.500 .625

6.00 4.50

.88 1.38

VB..221 VB..332

MS1153 MS1155

T7 T15

left hand SVABL062D

.38

.375

6.00

.88

VB..221

MS1153

SVABL082D SVABL103B

.50 .63

.500 .625

6.00 4.50

.88 1.38

VB..221 VB..332

MS1153 MS1155

T7 T15

gage insert

See pages B113–B114 for inserts.

SVJB -3°

C64

shim

shim screw

insert screw

Torx

—

MS1153

— —

MS1153 MS1153

T7 T7

MS1156 MS1156

T15 T15

catalog number right hand SVJBR062

hex

.38

.500

2.50

.88

VB..221

—

SVJBR082 SVJBR102

.50 .63

.625 .750

3.50 4.00

.88 .88

VB..221 VB..221

— —

SVJBR123 SVJBR163

.75 1.00

1.000 1.250

4.50 6.00

1.38 1.38

VB..332 VB..332

SKVN343 SKVN343

SRS3 SRS3

3.5 mm 3.5 mm

left hand SVJBL062

.38

.500

2.50

.88

VB..221

—

MS1153

SVJBL082 SVJBL102

.50 .63

.625 .750

3.50 4.00

.88 .88

VB..221 VB..221

— —

MS1153 MS1153

T7 T7

SVJBL123 SVJBL163

.75 1.00

1.000 1.250

4.50 6.00

1.38 1.38

VB..332 VB..332

SKVN343 SKVN343

SRS3 SRS3

3.5 mm 3.5 mm

MS1156 MS1156

T15 T15

www.kennametal.com

Screw-On Toolholders Screw-On Inserts

See pages B113–B114 for inserts.

catalog number right hand SVJBRF062D

.38

SVJBRF082D SVJBRF103B

.50 .63

left hand SVJBLF062D

.38

SVJBLF082D SVJBLF103B

.50 .63

gage insert

insert screw

Torx

.375

6.00

.94

VB..221

MS1153

.500 .625

6.00 4.50

.94 1.44

VB..221 VB..332

MS1153 MS1155

T7 T15

.375

6.00

.94

VB..221

MS1153

.500 .625

6.00 4.50

.94 1.44

VB..221 VB..332

MS1153 MS1155

T7 T15

See pages B113–B114 for inserts.

SVJP-W -3°

catalog number right hand SVJPR164EW

gage insert

insert screw

hex

1.00

1.250

7.00

1.62

VP..443

S411

5/32

left hand SVJPL164EW

1.00

1.250

7.00

1.62

VP..443

S411

5/32

www.kennametal.com

C65

O.D./I.D. Tooling

SVJB-F -3°

Screw-On Toolholders Screw-On Inserts

See pages B113–B114 for inserts.

O.D./I.D. Tooling

SVUB -3°

catalog number right hand SVUBR082

gage insert

insert screw

Torx

.50

.830

3.50

.50

.12

VB..221

MS1153

SVUBR102 left hand

.63

.955

4.00

.50

—

VB..221

MS1153

SVUBL082 SVUBL102

.50 .63

.830 .955

3.50 4.00

.50 .50

.12 —

VB..221 VB..221

MS1153 MS1153

T7 T7

gage insert

insert screw

Torx

See pages B114–B115 for inserts.

SWLC -5°

catalog number right hand SWLCR082

C66

.50

.625

3.50

.50

WC..2151

MS1153

SWLCR102 left hand

.63

.750

4.00

.50

WC..2151

MS1153

SWLCL082 SWLCL102

.50 .63

.625 .750

3.50 4.00

.50 .50

WC..2151 WC..2151

MS1153 MS1153

T7 T7

www.kennametal.com

Screw-On Toolholders Screw-On Inserts

See pages B114–B115 for inserts.

catalog number right hand SWLCRF082D

gage insert

shim

shim screw

hex

insert screw

Torx

.50

.500

6.00

.50

WC..2151

—

MS1153

SWLCRF103B left hand

.63

.625

4.50

.62

WC..3252

SKWP343

SRS3

3.5 mm

MS1156

T15

SWLCLF082D SWLCLF103B

.50 .63

.500 .625

6.00 4.50

.50 .62

WC..2151 WC..3252

— SKWP343

— SRS3

— 3.5 mm

MS1153 MS1156

T7 T15

www.kennametal.com

C67

O.D./I.D. Tooling

SWLC-F -5°

V-Bottom Round Toolholders Kendex™ Positive Inserts

See pages B128–B129 for inserts.

O.D./I.D. Tooling

411-VRS

H = H1

gage insert

nest

clamp

clamp screw

1.50

.75

.25

R..V23

NST1

CM214

MS1321

2.5 mm

1.19 1.19

1.13 1.13

.25 —

R..V35 R..V35

NST2 NST2

CM219 CM219

CS412 CS412

3.5 mm 3.5 mm

6.00 6.00

1.19 1.56

1.10 1.50

— .25

R..V35 R..V45

NST2 NST3

CM219 CM216

CS412 CS412

3.5 mm 3.5 mm

1.250 1.500

6.00 6.00

1.56 1.56

1.50 1.50

— —

R..V45 R..V45

NST3 NST3

CM216 CM216

CS412 CS412

3.5 mm 3.5 mm

1.25

1.250

6.00

1.19

1.13

—

R..V35

NST2

CM219

CS412

3.5 mm

1.00 1.25

1.000 1.250

6.00 6.00

1.50 1.56

1.50 1.50

.25 —

R..V45 R..V45

NST3 NST3

CM216 CM216

CS412 CS412

3.5 mm 3.5 mm

catalog number right hand 4111492VRS

1.00

1.500

6.00

4111573VRS 4111593VRS

1.00 1.25

1.000 1.250

6.00 6.00

4111613VRS 4111654VRS

1.50 1.00

1.500 1.000

4111674VRS 4111694VRS

1.25 1.50

left hand 4111603VRS

1.25

4111664VRS 4111684VRS

1.00 1.25

hex

See pages B128–B129 for inserts.

CRDP

C68

H = H1

catalog number CRDPN162DV CRDPN163DV

H 1.00 1.00

B 1.00 1.00

F .496 .496

L1 6.00 6.00

CD .75 1.13

H3 — —

gage insert R..V23 R..V35

nest NST1 NST2

clamp CM214 CM219

clamp screw MS1321 CS412

hex 2.5 mm 3.5 mm

CRDPN203DV CRDPN164DV

1.25 1.00

.621 .496

6.00 6.00

1.13 1.50

— .25

R..V35 R..V45

NST2 NST3

CM219 CM216

CS412 CS412

3.5 mm 3.5 mm

CRDPN204DV CRDPN205DV

1.25 1.25

.621 .621

6.00 6.00

1.50 1.50

— .25

R..V45 R..V565

NST3 NST4

CM216 CM217

CS412 MS1294

3.5 mm 6 mm

CRDPN206DV CRDPN246DV

1.25 1.50

.621 .746

6.00 6.00

1.50 1.50

.25 —

R..V665 R..V665

NST5 NST5

CM217 CM217

MS1294 MS1294

6 mm 6 mm

CRDPN248DV

1.50

.746

6.00

1.75

.25

R..V88

NST6

CM218

MS1242

8 mm

www.kennametal.com

V-Bottom Round Toolholders Kendex™ Positive Inserts

See pages B128–B129 for inserts. 45˚

CRGP

catalog number right hand CRGPR162DV

gage insert

nest

clamp

clamp screw

1.00

1.250

6.00

.25

—

R..V23

NST1

CM214

MS1321

2.5 mm

CRGPR163DV CRGPR164DV

1.00 1.00

1.250 1.250

6.00 6.00

.25 .25

— .25

R..V35 R..V45

NST2 NST3

CM219 CM216

CS412 CS412

3.5 mm 3.5 mm

CRGPR203DV CRGPR204DV

1.25 1.25

1.500 1.500

6.00 6.00

.25 .25

— —

R..V35 R..V45

NST2 NST3

CM219 CM216

CS412 CS412

3.5 mm 3.5 mm

CRGPR205DV CRGPR206DV

1.25 1.25

1.500 1.500

6.00 6.00

.25 .25

R..V565 R..V665

NST4 NST5

CM217 CM217

MS1294 MS1294

6 mm 6 mm

CRGPR246DV left hand

1.50

1.750

6.00

.25

—

R..V665

NST5

CM217

MS1294

6 mm

CRGPL162DV CRGPL163DV

1.00 1.00

1.250 1.250

6.00 6.00

.25 .25

— —

R..V23 R..V35

NST1 NST2

CM214 CM219

MS1321 CS412

2.5 mm 3.5 mm

CRGPL164DV CRGPL203DV

1.00 1.25

1.250 1.500

6.00 6.00

.25 .25

.25 —

R..V45 R..V35

NST3 NST2

CM216 CM219

CS412 CS412

3.5 mm 3.5 mm

CRGPL204DV CRGPL205DV

1.25 1.25

1.500 1.500

6.00 6.00

.25 .25

— .25

R..V45 R..V565

NST3 NST4

CM216 CM217

CS412 MS1294

3.5 mm 6 mm

CRGPL206DV CRGPL246DV

1.25 1.50

1.500 1.750

6.00 6.00

.25 .25

.25 —

R..V665 R..V665

NST5 NST5

CM217 CM217

MS1294 MS1294

6 mm 6 mm

hex

See pages B128–B129 for inserts.

VRAO

catalog number right hand VRAOR203E

gage insert

clamp

clamp screw

hex

1.25

1.281

7.00

1.31

R..V35

CM148

S153

3/16

left hand VRAOL203E

1.25

1.281

7.00

1.31

R..V35

CM149

S153

3/16

www.kennametal.com

C69

O.D./I.D. Tooling

H = H1

Positive Profiling Toolholders

O.D./I.D. Tooling

Bevel Lock

catalog number PROON164D PROON204D

H 1.00 1.25

B 1.00 1.25

F .750 .875

L1 6.00 6.00

CD 1.86 1.88

H3 — —

gage insert RC..43 RC..43

shim SMRN42B SMRN42B

lock pin BP46 BP46

hex 3/32 3/32

PROON244D PROON206D

1.50 1.25

1.000 1.000

6.00 6.00

1.88 2.36

— —

RC..43 RC..64

SMRN42B SMRN63B

BP46 BP68

3/32 1/8

PROON246 PROON208D

1.50 1.25

1.125 1.125

8.00 6.00

2.37 2.32

— .25

RC..64 RC..86

SMRN63B SMRN84B

BP68 BP812

1/8 9/64

PROON248 PROON328

1.50 2.00

1.250 1.500

8.00 18.00

2.37 4.50

— —

RC..86 RC..86

SMRN84B SMRN84B

BP812 BP812

9/64 9/64

PROON3210

2.00

1.625

18.00

4.50

—

RC..106

SMRN104B

BP812

9/64

NOTE: These toolholders accept RCGH-43 inserts only. RCMH-43 inserts will not fit.

C70

www.kennametal.com

Beyond BLAST™ • The First Through-Insert Coolant Delivery System from Kennametal

That’s Beyond BLAST.™ That’s Different Thinking. We didn’t just improve metalcutting technology. We reinvented it. Introducing Beyond BLAST, a revolutionary insert platform that delivers many of the benefits of high-pressure systems at conventional coolant pressures. Advanced coolant-application technology makes cutting more efficient and effective — while extending tool life. This tool is specifically designed for titanium and other high-temp alloys.

Higher Productivity, Extended Tool Life

Versatility

• Increased tool life up to 300%, depending on the insert geometry and cutting conditions.

• Ideal for applications where productivity or tool life is limited due to excess heat generated.

• Significant productivity and tool life increase in titanium machining.

• Offered as a standard item with engineered solution capabilities.

• Higher metal removal rates and reduced cycle time.

• Provides increased performance with high-pressure or low-pressure coolant delivery systems.

• Chipbreaker design in combination with PCT provides excellent chip control and workpiece finish.

www.kennametal.com

C71

0° Lead Angle

clamping style

insert shape

tool path

back boring profiling

page(s)

boring

clamping style

insert shape

back boring profiling

tool path

boring

Boring Bar Selection Guide

page(s)

-5° Lead Angle C

Kenloc

™

C80

C94–C97

Screw-On

Kenclamp

C76

Kenloc

C84

Kenclamp

C79

Kendex™

C91–C93

Screw-On

C108–C111

Screw-On

Kenloc

C83

Kenclamp

C78

Screw-On

C105–C106

TNT

—

Kenloc

C85

Screw-On

C114

Kenloc

C84

Screw-On

—

Screw-On

C118

C89 C111–C113

Screw-On

Kenloc

Screw-On

C115–C117

TNT

C87

Screw-On

C99

Screw-On

C114

Kenloc

C80

Kenclamp

C76

Kenloc

C83

Kenclamp

C79

Kendex

C90

TNT

—

Screw-On

-3° Lead Angle D

Kendex

C107

C114

C85

7° Lead Angle

-10° Lead Angle

15 and -15° Lead Angle C

-5° Lead Angle C

Kenloc

C81

Kenclamp

C77

Kendex

C87, C90

Screw-On

C97–C98 C100–C104

TNT

—

-15° lead angle

C72

www.kennametal.com

tool path

clamping style

insert shape

profiling facing

page(s)

turning

clamping style

insert shape

profiling facing

tool path

turning

Boring Bar Selection Guide

page(s)

45° Lead Angle

-17.5° Lead Angle D

Kenloc™

C82

Kenclamp™

C78

Screw-On

Kenloc

Kendex™

C88

TNT

C87

—

C114

27.5° Lead Angle D

Kenloc

C82

Kenclamp

C77

Clamping Styles Kenclamp Style

Screw-On Style

• Suitable for Kenloc inserts. • Unique clamp design provides rigid clamping. • Ensures insert repeatability and seating. • Reduced chatter and improved tool life.

• Top clamping by screw for Screw-On inserts.

Kenloc Style • Suitable for Kenloc inserts. • Lock pin and top clamp provide rigid clamping. • Wide variety of insert styles may be used. • Tools may be used with or without clamp.

www.kennametal.com

Kendex Style • Suitable for Kendex inserts. • Chipbreaker option available for ceramic inserts. • Wide variety of insert styles may be used.

C73

Boring Bar Catalog Numbering System

O.D./I.D. Tooling

A32MCFNR4

Bar Type

Bar Diameter

A Steel bar with coolant

S Steel bar without coolant

C Carbide bar

D DeVibrator bar with coolant

Inch: A two-digit number indicates the bar diameter in 1/16" increments

Bar Length**

3 3.5 4 4.5 5 5.5 6 6.5 7 8 10 12 14 16 18 20

= = = = = = = = = = = = = = = =

F G H J K L M N Q R S T U V W Y

** Used only when more than one length is available or a special length is required.

Insert Holding Method

Insert Shape

A B Kendex™

D E Top Notch™ Profiling

H K L

Kenclamp™

D Tuneable bar with coolant

M O P

E Carbide bar with coolant

Kenloc™

B DeVibrator

T Screw-On

H Interchangeable head

V W

L Heavy metal bar with coolant

C74

Kenlever™

www.kennametal.com

Boring Bar Catalog Numbering System

By referencing this easy-to-use guide, you can identify the correct product to meet your needs.

Bar Style or Lead Angle

Insert Clearance Angle

Hand of Tool

Insert Size

R = Right-hand boring bar

Inserts IC Number of 1/8ths of â&#x20AC;&#x153;Dâ&#x20AC;?

M.. = TNT/MTS clamping systems for ceramic and PCBN inserts D = Dual pocket

AP5 = Axil positive

KC = Kenclamp

+ = Insert thickness

Additional Information

L = Left-hand boring bar

L (E-style inserts)

L F P

www.kennametal.com

C75

O.D./I.D. Tooling

A32MCFNR4

Kenclamp™ Boring Bars Kenloc™ Inserts

Steel shank with through coolant. See pages B40–B49 for inserts.

O.D./I.D. Tooling

A-DCFN-KC 0°

gage γF° catalog number D D min F L1 CS insert right hand A16TDCFNR4KC3 1.000 1.200 .640 12.00 1/4-18 NPT -12.0 CN..432

shim

shim screw

—

wrench size shim screw

A20UDCFNR4KC3 1.250 1.470 .765 14.00 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP4S15IP A24UDCFNR4KC3 1.500 1.760 .890 14.00 1/4-18 NPT -10.0 CN..432 ICSN433 KMSP415IP left hand A16TDCFNL4KC3

1.000 1.200 .640 12.00 1/4-18 NPT -12.0 CN..432

—

A20UDCFNL4KC3 1.250 1.470 .765 14.00 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP4S15IP A24UDCFNL4KC3 1.500 1.760 .890 14.00 1/4-18 NPT -10.0 CN..432 ICSN433 KMSP415IP

clamp assembly

slotted pin

wrench size clamp screw

—

CM234RLP ASSY SSP025016M

15 IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

—

CM234RLP ASSY SSP025016M

15 IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

Steel shank with through coolant. See pages B40–B49 for inserts.

A-DCKN-KC 15°

gage shim wrench size clamp slotted wrench size γF° catalog number D D min F L1 L1A CS insert shim screw shim screw assembly pin clamp screw right hand A20UDCKNR4KC3 1.250 1.470 .765 14.00 .12 1/4-18 NPT -14.0 CN..432 ICSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP A24UDCKNR4KC3 1.500 1.760 .890 14.00 .12 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP415IP A32VDCKNR4KC3 2.000 2.400 1.281 16.00 .12 1/4-18 NPT -8.0 CN..432 ICSN433 KMSP415IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

A32VDCKNR5KC4 2.000 2.400 1.281 16.00 .15 1/4-18 NPT -10.0 CN..543 ICSN533 KMSP515IP left hand

15 IP

CM209R ASSY SSP025018M

15 IP

A20UDCKNL4KC3 1.250 1.470 .765 14.00 .12 1/4-18 NPT -14.0 CN..432 ICSN433 KMSP415IP A24UDCKNL4KC3 1.500 1.760 .890 14.00 .12 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP415IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

A32VDCKNL4KC3 2.000 2.400 1.281 16.00 — 1/4-18 NPT -8.0 CN..432 ICSN433 KMSP415IP A32VDCKNL5KC4 2.000 2.400 1.281 16.00 — 1/4-18 NPT -10.0 CN..543 ICSN533 KMSP515IP

15 IP 15 IP

CM234R ASSY SSP025016M CM209R ASSY SSP025018M

15 IP 15 IP

C76

www.kennametal.com

Kenclamp™ Boring Bars Kenloc™ Inserts

Steel shank with through coolant. See pages B40–B49 for inserts.

gage γF° catalog number D D min F L1 CS insert right hand A16TDCLNR3KC2 1.000 1.200 .640 12.00 1/4-18 NPT -10.0 CN..322

shim

shim screw

wrench size shim screw

—

clamp assembly

slotted pin

wrench size clamp screw

—

CM234RLP ASSY SSP025016M

9 IP

A16TDCLNR4KC3 1.000 1.200 .640 12.00 1/4-18 NPT -12.0 CN..432 — — A20UDCLNR4KC3 1.250 1.470 .765 14.00 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP4S15IP

— 15 IP

CM234RLP ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

A24UDCLNR4KC3 1.500 1.760 .890 14.00 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP415IP A28UDCLNR4KC3 1.750 2.010 1.015 14.00 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP415IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

A32VDCLNR4KC3 2.000 2.400 1.281 16.00 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP415IP A40VDCLNR4KC3 2.500 3.030 1.531 16.00 1/4-18 NPT -8.0 CN..432 ICSN433 KMSP415IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

A24UDCLNR5KC4 1.500 1.760 .890 14.00 1/4-18 NPT -14.0 CN..543 ICSN533 KMSP5S15IP A32VDCLNR5KC4 2.000 2.400 1.281 16.00 1/4-18 NPT -12.0 CN..543 ICSN533 KMSP515IP

15 IP 15 IP

CM209R ASSY SSP025018M CM209R ASSY SSP025018M

15 IP 15 IP

A32VDCLNR6KC4 2.000 2.400 1.281 16.00 1/4-18 NPT -12.0 CN..643 ICSN633 KMSP625IP A40VDCLNR6KC4 2.500 3.030 1.531 16.00 1/4-18 NPT -10.0 CN..643 ICSN633 KMSP625IP

25 IP 25 IP

CM210R ASSY SSP025018M CM210R ASSY SSP025018M

25 IP 25 IP

left hand A16TDCLNL3KC2 1.000 1.200 .640 12.00 1/4-18 NPT -10.0 CN..322

—

CM234RLP ASSY SSP025016M

9 IP

A16TDCLNL4KC3 1.000 1.200 .640 12.00 1/4-18 NPT -12.0 CN..432 — — A20UDCLNL4KC3 1.250 1.470 .765 14.00 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP4S15IP

—

— 15 IP

CM234RLP ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

A24UDCLNL4KC3 1.500 1.760 .890 14.00 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP415IP A28UDCLNL4KC3 1.750 2.010 1.015 14.00 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP415IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

A32VDCLNL4KC3 2.000 2.400 1.281 16.00 1/4-18 NPT -12.0 CN..432 ICSN433 KMSP415IP A40VDCLNL4KC3 2.500 3.030 1.531 16.00 1/4-18 NPT -8.0 CN..432 ICSN433 KMSP415IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

A24UDCLNL5KC4 1.500 1.760 .890 14.00 1/4-18 NPT -14.0 CN..543 ICSN533 KMSP5S15IP A32VDCLNL5KC4 2.000 2.400 1.281 16.00 1/4-18 NPT -12.0 CN..543 ICSN533 KMSP515IP

15 IP 15 IP

CM209R ASSY SSP025018M CM209R ASSY SSP025018M

15 IP 15 IP

A32VDCLNL6KC4 2.000 2.400 1.281 16.00 1/4-18 NPT -12.0 CN..643 ICSN633 KMSP625IP A40VDCLNL6KC4 2.500 3.030 1.531 16.00 1/4-18 NPT -10.0 CN..643 ICSN633 KMSP625IP

25 IP 25 IP

CM210R ASSY SSP025018M CM210R ASSY SSP025018M

25 IP 25 IP

Steel shank with through coolant. See pages B50–B57 for inserts.

A-DDPN-KC 27.5°

gage shim wrench size clamp slotted wrench size γF° insert catalog number D D min F L1 L1A CS shim screw shim screw assembly pin clamp screw right hand A20UDDPNR4KC3 1.250 1.705 1.000 14.00 .26 1/4-18 NPT -13.0 DN.432 IDSN443 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP A24UDDPNR4KC3 1.500 2.000 1.125 14.00 .26 1/4-18 NPT -10.0 DN.432 IDSN443 KMSP415IP left hand

15 IP

CM234R ASSY SSP025016M

15 IP

A20UDDPNL4KC3 1.250 1.705 1.000 14.00 .26 1/4-18 NPT -13.0 DN.432 IDSN443 KMSP415IP A24UDDPNL4KC3 1.500 2.000 1.125 14.00 .26 1/4-18 NPT -10.0 DN.432 IDSN443 KMSP415IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

www.kennametal.com

C77

O.D./I.D. Tooling

A-DCLN-KC -5°

Kenclamp™ Boring Bars Kenloc™ Inserts

Steel shank with through coolant. See pages B50–B57 for inserts.

O.D./I.D. Tooling

A-DDQN-KC -17.5°

gage shim wrench size clamp slotted wrench size γF° γP° insert shim screw shim screw assembly pin clamp screw catalog number D D min F L1 CS right hand A20UDDQNR4KC3 1.250 1.705 1.000 14.00 1/4-18 NPT -10.0 -12.0 DN.432 IDSN443 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP A24UDDQNR4KC3 1.500 2.000 1.125 14.00 1/4-18 NPT -8.5 -8.5 DN.432 IDSN443 KMSP415IP left hand

15 IP

CM234R ASSY SSP025016M

15 IP

A20UDDQNL4KC3 1.250 1.705 1.000 14.00 1/4-18 NPT -10.0 -12.0 DN.432 IDSN443 KMSP415IP A24UDDQNL4KC3 1.500 2.000 1.125 14.00 1/4-18 NPT -8.5 -8.5 DN.432 IDSN443 KMSP415IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

Steel shank with through coolant. See pages B50–B57 for inserts.

A-DDUN-KC -3°

gage γF° catalog number D D min F L1 CS insert right hand A16TDDUNR3KC3 1.000 1.300 .750 12.00 1/4-18 NPT -12.0 DN..332

shim

shim screw

—

wrench size shim screw

clamp assembly

slotted pin

wrench size clamp screw

—

CM234RLP ASSY SSP025016M

9 IP

A20UDDUNR3KC3 1.250 1.705 1.000 14.00 1/4-18 NPT -10.0 DN..332 IDSN322 KMSP315IP A20UDDUNR4KC3 1.250 1.705 1.000 14.00 1/4-18 NPT -12.0 DN..432 IDSN443 KMSP415IP

9 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

9 IP 15 IP

A24UDDUNR4KC3 1.500 2.000 1.125 14.00 1/4-18 NPT -10.0 DN..432 IDSN443 KMSP415IP A28UDDUNR4KC3 1.750 2.250 1.250 14.00 1/4-18 NPT -10.0 DN..432 IDSN443 KMSP415IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

A32VDDUNR4KC3 2.000 2.500 1.375 16.00 1/4-18 NPT -8.0 DN..432 IDSN443 KMSP415IP left hand

15 IP

CM234R ASSY SSP025016M

15 IP

A16TDDUNL3KC3 1.000 1.300 .750 12.00 1/4-18 NPT -12.0 DN..332 — — A20UDDUNL3KC3 1.250 1.705 1.000 14.00 1/4-18 NPT -10.0 DN..332 IDSN322 KMSP315IP

— 9 IP

CM234RLP ASSY SSP025016M CM234R ASSY SSP025016M

9 IP 9 IP

A20UDDUNL4KC3 1.250 1.705 1.000 14.00 1/4-18 NPT -12.0 DN..432 IDSN443 KMSP415IP A24UDDUNL4KC3 1.500 2.000 1.125 14.00 1/4-18 NPT -10.0 DN..432 IDSN443 KMSP415IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

A28UDDUNL4KC3 1.750 2.250 1.250 14.00 1/4-18 NPT -10.0 DN..432 IDSN443 KMSP415IP A32VDDUNL4KC3 2.000 2.500 1.375 16.00 1/4-18 NPT -8.0 DN..432 IDSN443 KMSP415IP

15 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

15 IP 15 IP

C78

www.kennametal.com

Kenclamp™ Boring Bars Kenloc™ Inserts

Steel shank with through coolant. See pages B59–B65 for inserts.

gage shim wrench size γF° insert catalog number D D min F L1 L1A CS shim screw shim screw right hand A20UDSKNR4KC3 1.250 1.470 .765 14.00 .12 1/4-18 NPT -14.0 SN..432 ISSN433 KMSP415IP 15 IP

CM234R ASSY SSP025016M

15 IP

A24UDSKNR4KC3 1.500 1.760 .890 14.00 .12 1/4-18 NPT -10.0 SN..432 ISSN433 KMSP415IP A32VDSKNR6KC4 2.000 2.400 1.28116.00 .18 1/4-18 NPT -12.0 SN..643 ISSN633 KMSP625IP

15 IP 25 IP

CM234R ASSY SSP025016M CM210R ASSY SSP025018M

15 IP 25 IP

left hand A16TDSKNL3KC2 1.000 1.200 .640 12.00 .09 1/4-18 NPT -10.0 SN..322

—

clamp assembly

wrench size clamp screw

—

CM234RLP ASSY SSP025016M

9 IP

A20UDSKNL3KC2 1.250 1.470 .765 14.00 .09 1/4-18 NPT -10.0 SN..322 ISSN332 KMSP315IP A20UDSKNL4KC3 1.250 1.470 .765 14.00 .12 1/4-18 NPT -14.0 SN..432 ISSN433 KMSP415IP

9 IP 15 IP

CM234R ASSY SSP025016M CM234R ASSY SSP025016M

9 IP 15 IP

A24UDSKNL4KC3 1.500 1.760 .890 14.00 .12 1/4-18 NPT -10.0 SN..432 ISSN433 KMSP415IP A32VDSKNL6KC4 2.000 2.400 1.28116.00 .18 1/4-18 NPT -12.0 SN..643 ISSN633 KMSP625IP

15 IP 25 IP

CM234R ASSY SSP025016M CM210R ASSY SSP025018M

15 IP 25 IP

Steel shank with through coolant. See pages B66–B74 for inserts.

A-DTFN-KC 0°

gage γF° insert catalog number D D min F L1 CS right hand A16TDTFNR3KC3 1.000 1.200 .640 12.00 1/4-18 NPT -12.0 TN..332

shim

shim screw

—

wrench size shim screw —

clamp assembly

slotted pin

CM234RLP ASSY SSP025016M

wrench size clamp screw 9 IP

A24UDTFNR4KC3 1.500 1.760 .890 14.00 1/4-18 NPT -10.0 TN..432 ITSN433 KMSP415IP A28UDTFNR3KC3 1.750 2.010 1.015 14.00 1/4-18 NPT -10.0 TN..332 ITSN323 KMSP315IP

15 IP 9 IP

CM234R ASSY CM234R ASSY

SSP025016M SSP025016M

15 IP 9 IP

A32VDTFNR4KC3 2.000 2.400 1.281 16.00 1/4-18 NPT -8.0 TN..432 ITSN433 KMSP415IP left hand

15 IP

CM234R ASSY

SSP025016M

15 IP

CM234RLP ASSY SSP025016M CM234R ASSY SSP025016M

9 IP 9 IP

A16TDTFNL3KC3 1.000 1.200 .640 12.00 1/4-18 NPT -12.0 TN..332 A20UDTFNL3KC3 1.250 1.470 1.000 14.00 1/4-18 NPT -12.0 TN..332

— —

A24UDTFNL3KC3 1.500 1.760 .890 14.00 1/4-18 NPT -10.0 TN..332 ITSN323 KMSP315IP A24UDTFNL4KC3 1.500 1.760 .890 14.00 1/4-18 NPT -10.0 TN..432 ITSN433 KMSP415IP

9 IP 15 IP

CM234R ASSY CM234R ASSY

SSP025016M SSP025016M

9 IP 15 IP

A28UDTFNL4KC3 1.750 2.010 1.015 14.00 1/4-18 NPT -10.0 TN..432 ITSN433 KMSP415IP A32VDTFNL4KC3 2.000 2.400 1.281 16.00 1/4-18 NPT -8.0 TN..432 ITSN433 KMSP415IP

15 IP 15 IP

CM234R ASSY CM234R ASSY

SSP025016M SSP025016M

15 IP 15 IP

A40VDTFNL4KC3

15 IP

CM234R ASSY

SSP025016M

15 IP

2.500 3.030 1.531 16.00 1/4-18 NPT -6.0 TN..432 ITSN433 KMSP415IP

www.kennametal.com

C79

O.D./I.D. Tooling

A-DSKN-KC 15°

Kenloc™ Boring Bars Kenloc Inserts

Steel shank with through coolant. See pages B40–B49 for inserts.

O.D./I.D. Tooling

A-MCFN 0°

γF°

gage insert

.640 12.00

1/4-18 NPT

-14.0

CN..432

—

KL44

—

.765 14.00 .890 14.00

1/4-18 NPT 1/4-18 NPT

-14.0 -10.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

A32MCFNR5 left hand

2.000 2.400 1.281 16.00

1/4-18 NPT

-12.0

CN..543

ICSN533

KL58

1/8

A16MCFNL4 A20MCFNL4

1.000 1.200 1.250 1.470

.640 12.00 .765 14.00

1/4-18 NPT 1/4-18 NPT

-14.0 -14.0

CN..432 CN..432

— ICSN433

KL44 KL46

A24MCFNL4 A32MCFNL5

1.500 1.760 .890 14.00 2.000 2.400 1.281 16.00

1/4-18 NPT 1/4-18 NPT

-10.0 -12.0

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

catalog number right hand A16MCFNR4

D min

1.000 1.200

A20MCFNR4 A24MCFNR4

1.250 1.470 1.500 1.760

shim

lock pin

hex (inch)

clamp screw

hex (inch)

CK7

STC9

3/32

CK21 CK21

STC20 STC20

1/8 1/8

CK21

STC20

1/8

— 3/32

CK7 CK21

STC9 STC20

3/32 1/8

CK21 CK21

STC20 STC20

1/8 1/8

clamp

clamp screw

hex (inch)

clamp

Steel shank with through coolant. See pages B40–B49 for inserts.

A-MCKN 15°

catalog number right hand A20MCKNR4

C80

D min

1.250 1.470

L1A

γF°

gage insert

shim

lock pin

hex (inch)

.765 14.00 .12

1/4-18 NPT -14.0

CN..432

ICSN433

KL46

3/32

CK20

STC20

1/8

A24MCKNR4 A32MCKNR4

1.500 1.760 .890 14.00 .12 2.000 2.400 1.281 16.00 .12

1/4-18 NPT -12.0 1/4-18 NPT -8.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

A32MCKNR5 left hand

2.000 2.400 1.281 16.00 .15

1/4-18 NPT -10.0

CN..543

ICSN533

KL58

1/8

CK12

STC4

5/32

A20MCKNL4 A24MCKNL4

1.250 1.470 1.500 1.760

.765 14.00 .12 .890 14.00 .12

1/4-18 NPT -14.0 1/4-18 NPT -12.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

A32MCKNL4 A32MCKNL5

2.000 2.400 1.281 16.00 .12 2.000 2.400 1.281 16.00 .15

1/4-18 NPT -8.0 1/4-18 NPT -10.0

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

3/32 1/8

CK20 CK12

STC20 STC4

1/8 5/32

www.kennametal.com

Kenloc™ Boring Bars Kenloc Inserts

Steel shank with through coolant. See pages B40–B49 for inserts.

γF°

gage insert

shim

lock pin

hex (inch)

clamp screw

hex (inch)

.640 12.00

1/4-18 NPT

-10.0

CN..322

.640 12.00 .765 14.00

1/4-18 NPT 1/4-18 NPT

-14.0 -14.0

CN..432 CN..432

—

KL33

5/64

— ICSN433

KL44 KL46

3/32 3/32

CK6

STC5

3/32

CK20 CK20

STC11 STC20

1/8 1/8

A24UMCLNR4 A28UMCLNR4

1.500 1.760 .890 14.00 1.750 2.010 1.015 14.00

1/4-18 NPT 1/4-18 NPT

-12.0 -12.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

A32VMCLNR4 A40VMCLNR4

2.000 2.400 1.281 16.00 2.500 3.030 1.531 16.00

1/4-18 NPT 1/4-18 NPT

-12.0 -8.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

A24MCLNR5 A32MCLNR5

1.500 2.000 .890 14.00 2.000 2.400 1.281 16.00

1/4-18 NPT 1/4-18 NPT

-12.0 -12.0

CN..543 CN..543

ICSN533 ICSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

A40MCLNR5 A32VMCLNR6

2.500 3.030 1.531 16.00 2.000 2.400 1.281 16.00

1/4-18 NPT 1/4-18 NPT

-8.0 -12.0

CN..543 CN..643

ICSN533 ICSN633

KL58 KL68

1/8 9/64

CK12 CK12

STC4 STC4

5/32 5/32

A40VMCLNR6 left hand

2.500 3.030 1.531 16.00

1/4-18 NPT

-10.0

CN..643

ICSN633

KL68

9/64

CK12

STC4

5/32

A16MCLNL3 A16TMCLNL4

1.000 1.200 1.000 1.200

.640 12.00 .640 12.00

1/4-18 NPT 1/4-18 NPT

-10.0 -14.0

CN..322 CN..432

— —

KL33 KL44

5/64 3/32

CK6 CK20

STC5 STC11

3/32 1/8

A20UMCLNL4 A24UMCLNL4

1.250 1.470 1.500 1.760

.765 14.00 .890 14.00

1/4-18 NPT 1/4-18 NPT

-14.0 -12.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

A28UMCLNL4 A32MCLNL4

1.750 2.010 1.015 14.00 2.000 2.400 1.281 16.00

1/4-18 NPT 1/4-18 NPT

-12.0 -12.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

A40MCLNL4 A24MCLNL5

2.500 3.030 1.531 16.00 1.500 2.000 .890 14.00

1/4-18 NPT 1/4-18 NPT

-8.0 -12.0

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

3/32 1/8

CK20 CK12

STC20 STC4

1/8 5/32

A32MCLNL5 A40MCLNL5

2.000 2.400 1.281 16.00 2.500 3.030 1.531 16.00

1/4-18 NPT 1/4-18 NPT

-12.0 -8.0

CN..543 CN..543

ICSN533 ICSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

A32VMCLNL6 A40VMCLNL6

2.000 2.400 1.281 16.00 2.500 3.030 1.531 16.00

1/4-18 NPT 1/4-18 NPT

-12.0 -10.0

CN..643 CN..643

ICSN633 ICSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

F L1 .640 12.00 .765 14.00

CS 1/4-18 NPT 1/4-18 NPT

γF° -10.0 -10.0

gage insert CN..432 CN..432

shim — ICSN433

lock pin KL44 KL46

hex (inch) — 3/32

clamp CK7 CK20

clamp screw STC9 STC20

hex (inch) 3/32 1/8

A24MCLNR4D A32MCLNR4D

1.500 2.125 .890 14.00 2.000 2.592 1.281 16.00

1/4-18 NPT 1/4-18 NPT

-10.0 -12.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

A32MCLNR5D

2.000 2.592 1.281 16.00

1/4-18 NPT

-12.0

CN..543

ICSN533

KL58

1/8

CK12

STC4

5/32

catalog number right hand A16MCLNR3

D min

1.000 1.200

A16TMCLNR4 A20UMCLNR4

1.000 1.200 1.250 1.470

clamp

Steel shank with through coolant. See pages B40–B49 for inserts.

A-MCLN-D -5°

catalog number A16MCLNR4D A20MCLNR4D

D D min 1.000 1.625 1.250 1.875

www.kennametal.com

C81

O.D./I.D. Tooling

A-MCLN -5°

Kenloc™ Boring Bars Kenloc Inserts

Steel shank with through coolant. See pages B50–B57 for inserts.

O.D./I.D. Tooling

A-MDPN 27.5°

catalog number right hand A20MDPNR4

D min

L1A

γF°

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.250 1.705 1.000 14.00 .26

1/4-18 NPT -13.0

DN..432

IDSN443

KL46L

3/32

CK22

STC20

1/8

A24MDPNR4 left hand

1.500 2.000 1.125 14.00 .26

1/4-18 NPT -10.0

DN..432

IDSN443

KL46L

3/32

CK22

STC20

1/8

A20MDPNL4 A24MDPNL4

1.250 1.705 1.000 14.00 .26 1.500 2.000 1.125 14.00 .26

1/4-18 NPT -13.0 1/4-18 NPT -10.0

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK22 CK22

STC20 STC20

1/8 1/8

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

Steel shank with through coolant. See pages B50–B57 for inserts.

A-MDQN -17.5°

catalog number right hand A20MDQNR4

C82

D min

γF°

γP°

1.250 1.705 1.000 14.00 1/4-18 NPT -12.000 -10.0

DN..432

IDSN443

KL46L

3/32

CK12

STC4

5/32

A24MDQNR4 left hand

1.500 2.000 1.125 14.00 1/4-18 NPT

-8.5

DN..432

IDSN443

KL46L

3/32

CK12

STC4

5/32

A20MDQNL4 A24MDQNL4

1.250 1.705 1.000 14.00 1/4-18 NPT -12.000 -10.0 1.500 2.000 1.125 14.00 1/4-18 NPT -8.500 -8.5

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK12 CK12

STC4 STC4

5/32 5/32

-8.500

www.kennametal.com

Kenloc™ Boring Bars Kenloc Inserts

Steel shank with through coolant. See pages B50–B57 for inserts.

γF°

gage insert

.750 12.00

1/4-18 NPT

-12.0

1.250 1.705 1.000 14.00 1.500 2.000 1.125 14.00

1/4-18 NPT 1/4-18 NPT

-12.0 -10.0

1/4-18 NPT 1/4-18 NPT

-10.0 -8.0

catalog number right hand A16MDUNR3

1.000 1.300

A20UMDUNR4 A24UMDUNR4 A28MDUNR4 A32VMDUNR4

1.750 2.250 1.250 14.00 2.000 2.500 1.375 16.00

left hand A16MDUNL3

D min

1.000 1.300

shim

lock pin

hex (inch)

DN..332

—

KL33L

5/64

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

clamp screw

hex (inch)

CK7

STC5

3/32

CK12 CK12

STC4 STC4

5/32 5/32

CK12 CK12

STC4 STC4

5/32 5/32

clamp

.750 12.00

1/4-18 NPT

-12.0

DN..332

—

KL33L

5/64

CK7

STC5

3/32

A20UMDUNL4 A24UMDUNL4

1.250 1.705 1.000 14.00 1.500 2.000 1.125 14.00

1/4-18 NPT 1/4-18 NPT

-12.0 -10.0

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK12 CK12

STC4 STC4

5/32 5/32

A28MDUNL4 A32VMDUNL4

1.750 2.250 1.250 14.00 2.000 2.500 1.375 16.00

1/4-18 NPT 1/4-18 NPT

-10.0 -8.0

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK12 CK12

STC4 STC4

5/32 5/32

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

Steel shank with through coolant. See pages B59–B65 for inserts.

A-MSKN 15°

1.250 1.470

.765 14.00 .12

1/4-18 NPT -14.0

SN..432

—

KL44

3/32

CK9

STC4

5/32

A24UMSKNR4 A28MSKNR4

1.500 1.760 .890 14.00 .12 1.750 2.010 1.015 14.00 .12

1/4-18 NPT -10.0 1/4-18 NPT -10.0

SN..432 SN..432

ISSN432 ISSN432

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

A32MSKNR6 A40MSKNR6

2.000 2.400 1.281 16.00 .18 2.500 3.030 1.531 16.00 .18

1/4-18 NPT -12.0 1/4-18 NPT -10.0

SN..643 SN..643

ISSN633 ISSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

left hand A20MSKNL4

D min

1.250 1.470

L1A

gage insert

catalog number right hand A20MSKNR4

γF°

.765 14.00 .12

1/4-18 NPT -14.0

SN..432

—

KL44

3/32

CK9

STC4

5/32

A24UMSKNL4 A32MSKNL6

1.500 1.760 .890 14.00 .12 2.000 2.400 1.281 16.00 .18

1/4-18 NPT -10.0 1/4-18 NPT -12.0

SN..432 SN..643

ISSN443 ISSN633

KL46 KL68

3/32 9/64

CK9 CK12

STC4 STC4

5/32 5/32

A40MSKNL6

2.500 3.030 1.531 16.00 .18

1/4-18 NPT -10.0

SN..643

ISSN633

KL68

9/64

CK12

STC4

5/32

www.kennametal.com

C83

O.D./I.D. Tooling

A-MDUN -3°

Kenloc™ Boring Bars Kenloc Inserts

Steel shank with through coolant. See pages B66–B74 for inserts.

O.D./I.D. Tooling

A-MTFN 0°

γF°

gage insert

shim

.640 12.00

1/4-18 NPT

-12.0

TN..332

—

KL33L

5/64

.765 14.00 .890 14.00

1/4-18 NPT 1/4-18 NPT

-12.0 -10.0

TN..332 TN..332

— ITSN323

KL33L KL34L

5/64 5/64

A28MTFNR3 A24UMTFNR4

1.750 2.010 1.015 14.00 1.500 1.760 .890 14.00

1/4-18 NPT 1/4-18 NPT

-10.0 -10.0

TN..332 TN..432

ITSN323 ITSN433

KL34L KL46

5/64 3/32

A28MTFNR4 A32MTFNR4

1.750 2.010 1.015 14.00 2.000 2.400 1.281 16.00

1/4-18 NPT 1/4-18 NPT

-10.0 -8.0

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

A40MTFNR4 left hand

2.500 3.030 1.531 16.00

1/4-18 NPT

-6.0

TN..432

ITSN433

A16MTFNL3 A20UMTFNL3

1.000 1.220 1.250 1.470

.640 12.00 .765 14.00

1/4-18 NPT 1/4-18 NPT

-12.0 -12.0

TN..332 TN..332

A24UMTFNL3 A24UMTFNL4

1.500 1.760 1.500 1.760

.890 14.00 .890 14.00

1/4-18 NPT 1/4-18 NPT

-10.0 -10.0

1.750 2.010 1.015 14.00 2.500 3.030 1.531 16.00

1/4-18 NPT 1/4-18 NPT

F L1 .640 12.00 .765 14.00

2.000 2.592 1.281 16.00

catalog number right hand A16MTFNR3

1.000 1.220

A20UMTFNR3 A24UMTFNR3

1.250 1.470 1.500 1.760

A28MTFNL4 A40MTFNL4

D min

lock pin

hex (inch)

clamp screw

hex (inch)

CK7

STC9

3/32

CK7 CK7

STC9 STC9

3/32 3/32

CK7 CK9

STC9 STC4

3/32 5/32

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

KL46

3/32

CK9

STC4

5/32

— —

KL33L KL33L

5/64 5/64

CK7 CK7

STC9 STC9

3/32 3/32

TN..332 TN..432

ITSN323 ITSN433

KL34L KL46

5/64 3/32

CK7 CK9

STC9 STC4

3/32 5/32

-10.0 -6.0

TN..432 TN..432

ITSN433 ITSN433

KL46 KL46

3/32 3/32

CK9 CK9

STC4 STC4

5/32 5/32

CS 1/4-18 NPT 1/4-18 NPT

γF° -10.0 -10.0

gage insert TN..332 TN..332

shim — —

lock pin KL33L KL33L

hex (inch) 5/64 5/64

clamp CK7 CK7

clamp screw STC9 STC9

hex (inch) 3/32 3/32

1/4-18 NPT

-8.0

TN..432

ITSN433

KL46

3/32

CK9

STC4

5/32

clamp

Steel shank with through coolant. See pages B66–B74 for inserts.

A-MTUN-D -3°

catalog number A16MTUNR3D A20MTUNR3D A32MTUNR4D

C84

D D min 1.000 1.312 1.250 1.550

www.kennametal.com

Kenloc™ Boring Bars Kenloc Inserts

Steel shank with through coolant. See pages B74–B78 for inserts.

γF°

gage insert

1.250 1.705 1.000 14.00

1/4-18 NPT

-12.0

VN..332

IVSN322

KL34L

5/64

1.500 2.000 1.125 14.00 2.000 2.500 1.325 16.00

1/4-18 NPT 1/4-18 NPT

-12.0 -10.0

VN..332 VN..432

IVSN322 IVSN433

KL34L KL46

5/64 3/32

A40MVUNR4 left hand

2.500 3.250 1.750 16.00

1/4-18 NPT

-10.0

VN..432

IVSN433

KL46

3/32

A20UMVUNL3 A24MVUNL3

1.250 1.705 1.000 14.00 1.500 2.000 1.125 14.00

1/4-18 NPT 1/4-18 NPT

-12.0 -12.0

VN..332 VN..332

IVSN322 IVSN322

KL34L KL34L

A32MVUNL4 A40MVUNL4

2.000 2.500 1.325 16.00 2.500 3.250 1.750 16.00

1/4-18 NPT 1/4-18 NPT

-10.0 -10.0

VN..432 VN..432

IVSN433 IVSN433

γF°

gage insert

catalog number right hand A20MVUNR3 A24UMVUNR3 A32MVUNR4

D min

clamp screw

hex (inch)

CK43

STC4

5/32

CK43 CK43

STC4 STC4

5/32 5/32

CK43

STC4

5/32

5/64 5/64

CK43 CK43

STC4 STC4

5/32 5/32

KL46 KL46

3/32 3/32

CK43 CK43

STC4 STC4

5/32 5/32

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

shim

lock pin

hex (inch)

clamp

Steel shank with through coolant. See pages B79–B83 for inserts.

A-MWLN 5°

catalog number right hand A16MWLNR3

D min

1.000 1.200 .640 12.00

1/4-18 NPT

-12.0

WN..332

—

KL33L

5/64

CK6

STC5

3/32

A24MWLNR3 A16TMWLNR4

1.500 1.760 .890 14.00 1.000 1.220 .640 12.00

1/4-18 NPT 1/4-18 NPT

-8.0 -12.0

WN..332 WN..432

IWSN322 —

KL34L KL44

5/64 3/32

CK6 CK20

STC5 STC11

3/32 1/8

A20UMWLNR4 A24UMWLNR4

1.250 1.470 .765 14.00 1.500 1.760 .890 14.00

1/4-18 NPT 1/4-18 NPT

-14.0 -14.0

WN..432 WN..432

IWSN433 IWSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

left hand A16MWLNL3

1.000 1.200 .640 12.00

1/4-18 NPT

-12.0

WN..332

—

KL33L

5/64

CK6

STC5

3/32

A24MWLNL3 A16MWLNL4

1.500 1.760 .890 14.00 1.000 1.220 .640 12.00

1/4-18 NPT 1/4-18 NPT

-8.0 -12.0

WN..332 WN..432

IWSN322 —

KL34L KL44

5/64 3/32

CK6 CK20

STC5 STC11

3/32 1/8

A20UMWLNL4 A24UMWLNL4

1.250 1.470 .765 14.00 1.500 1.760 .890 14.00

1/4-18 NPT 1/4-18 NPT

-14.0 -14.0

WN..432 WN..432

IWSN433 IWSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

www.kennametal.com

C85

O.D./I.D. Tooling

A-MVUN -3°

Kenloc™ Boring Bars Kenloc Inserts

Steel shank with through coolant. See pages B79–B83 for inserts.

O.D./I.D. Tooling

A-MWLN-D 5°

catalog number A16MWLNR3D A16MWLNR4D

D D min 1.000 1.310 1.000 1.420

F L1 .640 12.00 .700 12.00

CS 1/4-18 NPT 1/4-18 NPT

γF° -11.0 -12.0

gage insert WN..332 WN..432

shim — —

lock pin KL33L KL44

hex (inch) 5/64 3/32

clamp CK6 CK6

clamp screw STC5 STC5

hex (inch) 3/32 3/32

A20MWLNR3D A20MWLNR4D

1.250 1.560 1.250 1.550

.765 14.00 .765 14.00

1/4-18 NPT 1/4-18 NPT

-10.0 -14.0

WN..332 WN..432

IWSN322 IWSN433

KL34L KL46

5/64 3/32

CK6 CK6

STC5 STC5

3/32 3/32

A24MWLNR4D A32MWLNR4D

1.500 1.810 .890 14.00 2.000 2.582 1.276 16.00

1/4-18 NPT 1/4-18 NPT

-14.0 -14.0

WN..432 WN..432

IWSN433 IWSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

C86

www.kennametal.com

Top Notch™ Boring Bars Kendex™ Negative Inserts

Steel shank with through coolant. See page B122 for inserts.

catalog number right hand A24CCLNR4MX5

D min

gage insert

shim

shim screw

Torx

clamp assembly

Torx

1.500

2.165

.890

14.00

1/4-18 NPT

CN.X452

552.221

554.260

T20

551.326

T25

A32CCLNR4MX5 left hand

2.000

2.323

1.281

16.00

1/4-18 NPT

CN.X452

552.221

554.260

T20

551.326

T25

A24CCLNL4MX5 A32CCLNL4MX5

1.500 2.000

2.165 2.323

.890 1.281

14.00 16.00

1/4-18 NPT 1/4-18 NPT

CN.X452 CN.X452

552.221 552.221

554.260 554.260

T20 T20

551.326 551.326

T25 T25

gage insert

shim

shim screw

Torx

clamp assembly

Torx

Steel shank with through coolant. See page B124 for inserts.

A-CRGN-MN

catalog number right hand A32CRGNR4MN5

D min

2.000

2.559

1.281 16.00

1/4-18 NPT

RN.45

552.230

554.260

T20

551.343

T25

left hand A32CRGNL4MN5

2.000

2.559

1.281 16.00

1/4-18 NPT

RN.45

552.230

554.260

T20

551.343

T25

Steel shank with through coolant. See page B127 for inserts.

A-CWLN-MX -5°

catalog number right hand A24CWLNR4MX5

D min

gage insert

shim

shim screw

Torx

clamp assembly

Torx

1.500

3.150

.890

14.00

1/4-18 NPT

WN.X452

552.210

554.260

T20

551.326

T25

left hand A24CWLNL4MX5

1.500

3.150

.890

14.00

1/4-18 NPT

WN.X452

552.210

554.260

T20

551.326

T25

www.kennametal.com

C87

O.D./I.D. Tooling

A-CCLN-MX -5°

Kendex™ Boring Bars Kendex Negative Polycrystalline Inserts

Steel shank with through coolant. See page B182 for inserts.

O.D./I.D. Tooling

A-CRGN

catalog number right hand A16CRGNR3

D min

γF°

gage insert

clamp

clamp screw

hex (inch)

1.000

1.200

.640

12.00

1/4-18 NPT

-10.0

RN.32

CK7LP

STC9

3/32

A16CRGNR4 left hand

1.000

1.200

.640

12.00

1/4-18 NPT

-10.0

RN.42

CK7LP

STC9

3/32

A12CRGNL3 A16CRGNL3

.750 1.000

.930 1.200

.500 .640

10.00 12.00

1/8-27 NPT 1/4-18 NPT

-11.0 -10.0

RN.32 RN.32

CK7LP CK7LP

STC9 STC9

3/32 3/32

Carbide shank with through coolant. See page B182 for inserts.

E-CRGN

C88

catalog number right hand E16CRGNR3

D min

γF°

gage insert

clamp

clamp screw

hex (inch)

1.000

1.200

.640

12.00

.3120

-10.0

RN.32

CK7LP

STC9

3/32

left hand E10CRGNL3

.625

.770

.406

10.00

.2180

-12.0

RN.32

CK7LP

STC9

3/32

www.kennametal.com

Kendex™ Boring Bars Kendex Negative Polycrystalline Inserts

Steel shank with through coolant. See page B184 for inserts.

catalog number right hand A08CTLNR2

A10CTLNR2 A16CTLNR2 left hand A10CTLNL2

.625

gage insert

.312

8.00

1/16-27 NPT

.406 .640

10.00 12.00

1/8-27 NPT 1/4-18 NPT

.406

10.00

1/8-27 NPT

D min

.500

.600

.625 1.000

.770 1.200 .770

clamp

clamp screw

TN.221

CK27

STC27

5/64

TN.221 TN.221

CK7LP CK7LP

STC9 STC9

3/32 3/32

TN.221

CK7LP

STC9

3/32

O.D./I.D. Tooling

A-CTLN-5°

hex (inch)

Carbide shank with through coolant. See page B184 for inserts.

E-CTLN-5°

catalog number right hand E08CTLNR2

D min

gage insert

clamp

clamp screw

hex (inch)

.500

.600

.312

8.00

.19

TN.221

CK27

STC27

5/64

E12CTLNR2 left hand

.750

.930

.500

10.00

.28

TN.221

CK7LP

STC9

3/32

E08CTLNL2

.500

.600

.312

8.00

.19

TN.221

CK27

STC27

5/64

www.kennametal.com

C89

Kendex™ Boring Bars Kendex Positive Inserts

Steel shank with through coolant. See page B84 for inserts.

O.D./I.D. Tooling

A-CCLP-5°

catalog number right hand A16CCLPR4

D 1.000

A24CCLPR4

1.500

γF°

gage insert

1.200 .640 12.00

1/4-18 NPT

-3.0

CP.422

SM369

1.760 .890 14.00

1/4-18 NPT

0.0

CP.422

SM369

D min

shim

shim screw

hex (inch)

clamp

clamp screw

hex (inch)

S19

1/16

CK20

STC11

1/8

S19

1/16

CK22

STC26

1/8

Steel shank with through coolant. See pages B85–B86 and B129–B130 for inserts.

A-CSKP 15°

catalog number A16CSKPR4 A20CSKPR4 A24CSKPR4

C90

D D min F L1 L1A 1.000 1.200 .640 12.00 .12 1.250 1.470 .765 14.00 .12

CS 1/4-18 NPT 1/4-18 NPT

gage insert SP.422 SP.422

shim — SM40

shim screw — S19

hex (inch) — 1/16

clamp CK20 CK10

clamp screw STC11 STC8

hex (inch) 1/8 5/32

1.500

1/4-18 NPT

SP.422

SM40

S19

1/16

CK10

STC8

5/32

1.760 .890 14.00 .12

www.kennametal.com

Kendex™ Boring Bars Kendex Positive Inserts

Steel shank with through coolant. See pages B86–B87 and B130 for inserts.

γF°

gage insert

shim

shim screw

—

-3.0

1/16-27 NPT 1/8-27 NPT

-3.0 -4.0

TP..2151

—

TP.221 TP.221

— —

1/8-27 NPT 1/4-18 NPT

0.0 0.0

TP.322 TP.322

.765 14.00 — .890 14.00 —

1/4-18 NPT 1/4-18 NPT

-3.0 -3.0

A24CTFPR4 A32CTFPR4

1.500 1.760 .890 14.00 — 2.000 2.400 1.281 16.00 —

1/4-18 NPT 1/4-18 NPT

A40CTFPR4 left hand

2.500 3.030 1.531 16.00 —

catalog number right hand A06CTFPR2

.375

.480

.250

A08CTFPR2 A10CTFPR2

.500 .625

.600 .770

.312 8.00 — .406 10.00 —

A12CTFPR3 A16TCTFPR3

.750 .930 1.000 1.200

.500 10.00 — .640 12.00 —

A20UCTFPR3 A24CTFPR3

1.250 1.470 1.500 1.760

A08CTFPL2 A10CTFPL2

6.00 .13

hex (inch)

clamp

—

CK27

STC27

5/64

— —

CK27 CK19

STC27 STC9

5/64 3/32

— —

CK7 CK20

STC9 STC11

3/32 1/8

TP.322 TP.322

SM41 SM41

S19 S19

1/16 1/16

CK10 CK10

STC8 STC8

5/32 5/32

-3.0 -3.0

TP.432 TP.432

SM37 SM37

S125 S125

3/32 3/32

CK10 CK9

STC8 STC4

5/32 5/32

1/4-18 NPT

-3.0

TP.432

SM37

S125

3/32

CK9

STC4

5/32

clamp screw

hex (inch)

.600 .770

.312 8.00 — .406 10.00 —

1/16-27 NPT 1/8-27 NPT

-3.0 -4.0

TP.221 TP.221

— —

CK27 CK19

STC27 STC9

5/64 3/32

A12CTFPL3 A16TCTFPL3

.750 .930 1.000 1.200

.500 10.00 — .640 12.00 —

1/8-27 NPT 1/4-18 NPT

0.0 0.0

TP.322 TP.322

— —

CK7 CK20

STC9 STC11

3/32 1/8

A20UCTFPL3 A24CTFPL4

1.250 1.470 1.500 1.760

.765 14.00 — .890 14.00 —

1/4-18 NPT 1/4-18 NPT

-3.0 -3.0

TP.322 TP.432

SM41 SM37

S19 S125

1/16 3/32

CK10 CK10

STC8 STC8

5/32 5/32

2.000 2.400 1.281 16.00 —

1/4-18 NPT

-3.0

TP.432

SM37

S125

3/32

CK9

STC4

5/32

A32CTFPL4

.500 .625

D min

www.kennametal.com

C91

O.D./I.D. Tooling

A-CTFP 0°

Kendex™ Boring Bars Kendex Positive Inserts

Carbide shank with through coolant. See pages B86–B87 and B130 for inserts.

O.D./I.D. Tooling

E-CTFP 0°

catalog number right hand E08KCTFPR2 E08RCTFPR2 E10MCTFPR2 E10SCTFPR2 E12QCTFPR3 E12SCTFPR3 E16TCTFPR3

D min

.500

.600

.312

.500 .625

.600 .770

.312 .406

.625 .750

.770 .930

.406 .500

.750 1.000

.930 1.200

.500 .640

γF°

gage insert

5.00

.19

-3.0

8.00 6.00

.19 .22

-3.0 0.0

10.00 7.00

.22 .28

10.00 12.00

.28 .31

clamp

clamp screw

hex (inch)

TP.221

CK27

STC27

5/64

TP.221 TP.221

CK27 CK19

STC27 STC9

5/64 3/32

0.0 0.0

TP.221 TP.322

CK19 CK7

STC9 STC9

3/32 3/32

0.0 0.0

TP.322 TP.322

CK7 CK20

STC9 STC11

3/32 1/8

left hand E10MCTFPL2

.625

.770

.406

6.00

.22

0.0

TP.221

CK19

STC9

3/32

E12QCTFPL3 E12SCTFPL3

.750 .750

.930 .930

.500 .500

7.00 10.00

.28 .28

0.0 0.0

TP.322 TP.322

CK7 CK7

STC9 STC9

3/32 3/32

E16TCTFPL3

1.000

1.200

.640

12.00

.31

0.0

TP.322

CK20

STC11

1/8

DeVibrator shank. See pages B86–B87 and B130 for inserts.

B-CTFP 0°

C92

catalog number B10CTFPR2 B12CTFPR3

D .625 .750

D min .770 .930

F .406 .500

L1 10.00 10.00

L1 min 5.25 5.75

γF° 0.0 0.0

gage insert TP.221 TP.322

shim — —

shim screw — —

hex (inch) — —

clamp CK19 CK7

clamp screw STC9 STC9

hex (inch) 3/32 3/32

B14CTFPR3 B16CTFPR3

.875 1.000

1.060 1.200

.516 .640

10.00 12.00

6.25 6.50

0.0 0.0

TP.322 TP.322

— —

CK20 CK20

STC11 STC11

1/8 1/8

B20CTFPR3 B24CTFPR4

1.250 1.500

1.470 1.760

.765 .890

14.00 15.50

8.25 9.75

-3.0 -3.0

TP.322 TP.432

SM41 SM37

S111 S125

1/16 3/32

CK10 CK10

STC8 STC8

5/32 5/32

B28CTFPR4 B32CTFPR4

1.750 2.000

2.010 2.400

1.015 18.50 1.281 21.50

10.75 12.25

-3.0 -3.0

TP.432 TP.432

SM37 SM37

S125 S125

3/32 3/32

CK10 CK9

STC8 STC4

5/32 5/32

www.kennametal.com

Kendex™ Boring Bars Kendex Positive Inserts

Steel shank with through coolant. See pages B86–B87 and B130 for inserts.

γF°

gage insert

clamp

clamp screw

hex (inch)

.13

—

-3.0

TP.2151

CK27

STC27

5/64

— —

1/16-27 NPT 1/8-27 NPT

-3.0 0.0

TP.221 TP.322

CK27 CK7

STC27 STC9

5/64 3/32

12.00

—

1/4-18 NPT

0.0

TP.322

CK20

STC11

1/8

.250 .312

6.00 8.00

.13 —

— 1/16-27 NPT

-3.0 -3.0

TP.2151 TP.221

CK27 CK27

STC27 STC27

5/64 5/64

.770 .930

.406 .500

10.00 10.00

.16 —

1/8-27 NPT 1/8-27 NPT

-3.0 0.0

TP.221 TP.322

CK19 CK7

STC9 STC9

3/32 3/32

1.220

.640

12.00

—

1/4-18 NPT

0.0

TP.322

CK20

STC11

1/8

catalog number right hand A06CTLPR2

D min

.375

.480

.250

6.00

A08CTLPR2 A12CTLPR3

.500 .750

.600 .930

.312 .500

8.00 10.00

A16CTLPR3 left hand

1.000

1.220

.640

A06CTLPL2 A08CTLPL2

.375 .500

.480 .600

A10CTLPL2 A12CTLPL3

.625 .750

A16CTLPL3

1.000

O.D./I.D. Tooling

A-CTLP -5°

Check the Kennametal website!

Turning Visit http://www.kennametal.com/turning/ to browse our electronic catalog any time you’re looking for Kennametal’s best tooling solutions. It’s fast, free, and always available. The online e-catalog is updated weekly with products and solutions for milling, turning, drilling, and tooling systems applications.

C93

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B88–B91 for inserts.

O.D./I.D. Tooling

A-SCFC 0°

catalog number right hand A06MSCFCR2

D min

.375

.480

A08RSCFCR2 A10SSCFCR2

.500 .625

.600 .770

A12SSCFCR3 A16TSCFCR3

.750 1.000

.930 1.200

— —

γF°

gage insert

insert screw

Torx

.13

—

-8.0

CC..2151

MS1153

— —

1/16-27 NPT 1/8-27 NPT

-7.0 -5.0

CC..2151 CC..2151

MS1153 MS1153

T7 T7

— —

1/8-27 NPT 1/4-18 NPT

-5.0 -4.0

CC..3252 CC..3252

MS1155 MS1155

T15 T15

—

.250

6.00

— —

.312 .406

8.00 10.00

.500 .640

10.00 12.00

left hand A08RSCFCL2

.500

.600

—

.312

8.00

—

1/16-27 NPT

-7.0

CC..2151

MS1153

A10SSCFCL2 A12SSCFCL3

.625 .750

.770 .930

— —

.406 .500

10.00 10.00

— —

1/8-27 NPT 1/8-27 NPT

-5.0 -5.0

CC..2151 CC..3252

MS1153 MS1155

T7 T15

A16TSCFCL3

1.000

1.200

—

.640

12.00

—

1/4-18 NPT

-4.0

CC..3252

MS1155

T15

Steel shank with through coolant. See pages B91–B92 for inserts.

A-SCFD 0°

catalog number A03XSCFDR12 A04FSCFDR12

C94

D .188 .250

D min .234 .292

D2 .203 .260

F .122 .152

L1 2.50 3.00

A .040 .040

gage insert CD..120605 CD..120605

insert screw CC09 CC11

Torx T6 T6

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Carbide shank with through coolant. See pages B91–B92 for inserts.

catalog number right hand E03HSCFDR12

D min

.188

.224

.193

.117

E03MSCFDR12 E04HSCFDR12

.188 .250

.224 .292

.193 .258

.117 .152

E04MSCFDR12 E05MSCFDR12

.250 .312

.292 .356

.258 .322

.152 .185

left hand E04HSCFDL12

.250

.292

.258

.152

gage insert

4.00

.040

CD..120605

CC11

6.00 4.00

.040 .047

CD..120605 CD..120605

CC11 CC11

T6 T6

6.00 6.00

.047 .093

CD..120605 CD..120605

CC11 CC11

T6 T6

4.00

.047

CD..120605

CC11

insert screw

Torx

Necked steel shank with through coolant. See pages B91–B92 for inserts.

A-SCFD 0°

catalog number right hand A0406XSCFDR12125

D min

gage insert

insert screw

Torx

.375

.292

.260

.152

2.50

1.25

.040

CD..120605

CC11

A0408XSCFDR12075

.500

.292

.260

.152

2.75

.75

.040

CD..120605

CC11

www.kennametal.com

C95

O.D./I.D. Tooling

E-SCFD 0°

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B92–B95 for inserts.

O.D./I.D. Tooling

A-SCFP 0°

γF°

gage insert

insert screw

.13

—

-4.0

CP..2151

MS1153

— —

1/16-27 NPT 1/8-27 NPT

-2.0 0.0

CP..2151 CP..2151

MS1153 MS1153

T7 T7

10.00 12.00

— —

1/8-27 NPT 1/4-18 NPT

-2.0 0.0

CP..3252 CP..3252

MS1155 MS1155

T15 T15

.250

6.00

.13

—

-4.0

CP..2151

MS1153

.312 .406

8.00 10.00

— —

1/16-27 NPT 1/8-27 NPT

-2.0 0.0

CP..2151 CP..2151

MS1153 MS1153

T7 T7

10.00 12.00

— —

1/8-27 NPT 1/4-18 NPT

-2.0 0.0

CP..3252 CP..3252

MS1155 MS1155

T15 T15

catalog number right hand A06SCFPR2

D min

.375

.480

.250

6.00

A08SCFPR2 A10SCFPR2

.500 .625

.600 .770

.312 .406

8.00 10.00

A12SCFPR3 A16SCFPR3

.750 1.000

.930 1.200

.500 .640

left hand A06SCFPL2

.375

.480

A08SCFPL2 A10SCFPL2

.500 .625

.600 .770

A12SCFPL3 A16SCFPL3

.750 1.000

.930 1.200

.500 .640

Torx

NOTE: ANSI/ISO compatible 60° countersunk hole insert. This tool will also accept CPGM/CPGT/CPGW-21.5_ inserts. 60° countersunk hole insert (i.e., CPMT/CPGT/CPGW-32.5_). 90° countersunk hole inserts (i.e., CPGM/CPGB-32.5_) do not fit this tool.

Steel shank with through coolant. See pages B92–B95 for inserts.

A-SCFP-A 0°

catalog number right hand A12SCFPR3AP5

D min

gage insert

insert screw

Torx

.750

.930

.500

10.000

1/8-27 NPT

CP..3252

MS1027

A16SCFPR3AP5 left hand

1.000

1.190

.625

12.000

1/4-18 NPT

CP..3252

MS1027

A12SCFPL3AP5 A16SCFPL3AP5

.750 1.000

.930 1.190

.500 .625

10.000 12.000

1/8-27 NPT 1/4-18 NPT

CP..3252 CP..3252

MS1027 —

T9 T9

NOTE: 90° countersunk hole insert (i.e., CPGM/CPG1332.5). ANSI/ISO compatible 60° countersunk hole. Insert (i.e., CPMT/CPGT/CPGW 32.5) does not fit this tool.

C96

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Heavy metal bar with through coolant. See pages B92–B95 for inserts.

catalog number right hand L06MSCFPR2

D min

γF°

gage insert

insert screw

Torx

.375

.480

.250

6.059

.125

-4.0

L08RSCFPR2 L10RSCFPR2

.500 .625

.600 .770

.312 .406

7.928 7.992

.156 .156

-2.0 0.0

CP..2151..

MS1939

CP..2151.. CP..2151..

MS1153 MS1153

T7 T7

L12RSCFPR3 L16SSCFPR3

.750 1.000

.930 1.200

.500 .640

7.960 9.941

.156 .250

-2.0 0.0

CP..3252.. CP..3252..

MS1155 MS1155

T15 T15

left hand L06MSCFPL2

.375

.480

.250

6.059

.125

-4.0

CP..2151..

MS1939

L08RSCFPL2 L10RSCFPL2

.500 .625

.600 .770

.312 .406

7.928 7.992

.156 .156

-2.0 0.0

CP..2151.. CP..2151..

MS1153 MS1153

T7 T7

L12RSCFPL3

.750

.930

.500

7.960

.156

-2.0

CP..3252..

MS1155

T15

NOTE: ANSI/ISO compatible 68° countersunk hole insert. This tool will accept CPGM/CPGT/CPGW 21.5°_inserts. ANSI/ISO compatible 60° countersunk hole inserts (i.e., CPMT/CPGT/CPGW 32.5). 90° countersunk hole inserts (i.e., CPGM/CPGB 32.5) do not fit this tool.

Steel shank with through coolant. See pages B88–B91 for inserts.

A-SCLC -5°

γF°

gage insert

insert screw

Torx

.13

—

-8.0

CC..2151

MS1939

— —

1/16-27 NPT 1/8-27 NPT

-7.0 -5.0

CC..2151 CC..2151

MS1153 MS1153

T7 T7

10.000 10.000

— —

1/8-27 NPT 1/8-27 NPT

-8.0 -5.0

CC..3252 CC..3252

MS1155 MS1155

T15 T15

.640

12.000

—

1/4-18 NPT

-4.0

CC..3252

MS1155

T15

.480 .600

.250 .312

6.000 8.000

.13 —

— 1/16-27 NPT

-8.0 -7.0

CC..2151 CC..2151

MS1939 MS1153

T7 T7

.625 .625

.770 .770

.406 .406

10.000 10.000

— —

1/8-27 NPT 1/8-27 NPT

-5.0 -8.0

CC..2151 CC..3252

MS1153 MS1155

T7 T15

.750 1.000

.930 1.200

.500 .640

10.000 12.000

— —

1/8-27 NPT 1/4-18 NPT

-5.0 -4.0

CC..3252 CC..3252

MS1155 MS1155

T15 T15

catalog number right hand A06MSCLCR2

D min

.375

.480

.250

6.000

A08RSCLCR2 A10SSCLCR2

.500 .625

.600 .770

.312 .406

8.000 10.000

A10SSCLCR3 A12SSCLCR3

.625 .750

.770 .930

.406 .500

A16TSCLCR3 left hand

1.000

1.200

A06MSCLCL2 A08RSCLCL2

.375 .500

A10SSCLCL2 A10SSCLCL3 A12SSCLCL3 A16TSCLCL3

www.kennametal.com

C97

O.D./I.D. Tooling

L-SCFP 0°

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B91–B92 for inserts.

O.D./I.D. Tooling

A-SCLD -5°

catalog number right hand A03XSCLDR12A

D min

gage insert

insert screw

Torx

.188

.204

.180

.104

2.50

.040

CD..120605

CC09

A03XSCLDR12 A04FSCLDR12

.188 .250

.230 .285

.203 .260

.116 .145

2.50 3.00

.040 .040

CD..120605 CD..120605

CC09 CC11

T6 T6

left hand A03XSCLDL12

.188

.230

.203

.116

2.50

.040

CD..120605

CC09

A04FSCLDL12

.250

.285

.260

.145

3.00

.040

CD..120605

CC11

Carbide shank with through coolant. See pages B91–B92 for inserts.

E-SCLD -5°

C98

catalog number right hand E03HSCLDR12A

D min

gage insert

insert screw

Torx

.187

.218

—

.111

4.00

.42

.040

CD..120605

CC09

E03HSCLDR12 E03MSCLDR12

.187 .188

.224 .224

— .189

.117 .117

4.00 6.00

.42 —

.040 .040

CD..120605 CD..120605

CC09 CC09

T6 T6

E03MSCLDR12A E04HSCLDR12

.188 .250

.218 .285

.193 .260

.111 .145

6.00 4.00

— .48

.040 .047

CD..120605 CD..120605

CC09 CC11

T6 T6

E04MSCLDR12 E05MSCLDR12

.250 .312

.285 .356

— —

.145 .185

6.00 6.00

.48 .54

.047 .093

CD..120605 CD..120605

CC11 CC11

T6 T6

left hand E03MSCLDL12

.188

.224

.189

.117

6.00

—

.040

CD..120605

CC09

E03HSCLDL12A E03MSCLDL12A

.188 .188

.218 .218

.193 .193

.111 .111

4.00 6.00

— —

.040 .040

CD..120605 CD..120605

CC09 CC09

T6 T6

E03HSCLDL12 E04MSCLDL12

.188 .250

.224 .285

.193 .258

.117 .145

4.00 6.00

— —

.040 .047

CD..120605 CD..120605

CC09 CC11

T6 T6

E04HSCLDL12 E05MSCLDL12

.250 .312

.285 .356

.263 .322

.145 .185

4.00 6.00

.48 —

.047 .093

CD..120605 CD..120605

CC11 CC11

T6 T6

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See page B91 for inserts.

catalog number right hand A03XSC7DR12

D min

gage insert

insert screw

Torx

.188

.180

.165

.095

2.50

.040

CDHB120605

CC09

left hand A03XSC7DL12

.188

.180

.165

.095

2.50

.040

CDHB120605

CC09

Carbide shank with through coolant. See pages B91–B92 for inserts.

E-SC7D -7°

catalog number right hand E25MSC7DR12

D min

gage insert

insert screw

Torx

.156

.180

.165

.095

6.00

.039

CD..120605

CC09

left hand E25MSC7DL12

.156

.180

.165

.095

6.00

.039

CD..120605

CC09

www.kennametal.com

C99

O.D./I.D. Tooling

A-SC7D -7°

Screw-On Boring Bars Screw-On Inserts

Necked steel shank with through coolant. See pages B91–B92 for inserts.

O.D./I.D. Tooling

A-SCLD -5°

γF°

gage insert

insert screw

Torx

2.50

.50

.040

0.0

CD..120605

CC09

2.50 3.50

1.00 1.00

.040 .078

0.0 -4.0

CD..120605 CD..12061

CC09 MS1454

T6 T5

.116 .116

2.50 2.50

.50 1.00

.040 .040

0.0 0.0

CD..120605 CD..120605

CC11 CC11

T6 T6

.234 .260

.156 .145

4.00 2.50

1.25 .75

.078 .040

-1.0 0.0

CD..12061 CD..120605

MS1454 CC11

T5 T6

.285

.260

.145

2.50

1.25

.040

0.0

CD..120605

CC11

.375 .375

.243 .300

.193 .234

.126 .156

3.50 4.00

1.00 1.25

.078 .078

-4.0 -1.0

CD..12061 CD..12061

MS1454 MS1454

T5 T5

insert screw

Torx

catalog number right hand A2906XSCLDR1205

D min

.375

.204

.180

.104

A2906XSCLDR121 A0306SCLDR12

.375 .375

.204 .243

.180 .193

.104 .126

A3206XSCLDR1205 A3206XSCLDR121

.375 .375

.228 .228

.203 .203

A0406SCLDR12 A0406XSCLDR12075

.375 .375

.300 .285

A0406XSCLDR12125 left hand

.375

A0306SCLDL12 A0406SCLDL12

Necked carbide shank with through coolant. See pages B91–B92 for inserts.

E-SCLD -5°

C100

catalog number right hand E3208XSCLDR121

D min

gage insert

.500

.234

.187

.119

2.50

1.00

.13

.047

CD..120605

CC09

E0408HSCLDR1225 E2910XSCLDR12088

.500 .625

.285 .208

.258 .189

.145 .104

4.00 3.38

2.50 .88

.13 .13

.047 .047

CD..120605 CD..120605

CC11 CC09

T6 T6

E3210KSCLDR122 E0410HSCLDR12125

.625 .625

.234 .285

.210 .258

.119 .145

4.50 3.75

2.00 1.25

.13 .13

.047 .047

CD..120605 CD..120605

CC09 CC11

T6 T6

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B92–B95 for inserts.

γF°

gage insert

insert screw

.13

—

-6.0

CP..2151

MS1153

— —

1/16-27 NPT 1/8-27 NPT

-3.0 -2.0

CP..2151 CP..2151

MS1153 MS1153

T7 T7

10.00 10.00

— —

1/8-27 NPT 1/8-27 NPT

-2.0 -2.0

CP..3252 CP..3252

MS1155 MS1155

T15 T15

.640

12.00

—

1/4-18 NPT

0.0

CP..3252

MS1155

T15

.480 .600

.250 .312

6.00 8.00

.13 —

— 1/16-27 NPT

-6.0 -3.0

CP..2151 CP..2151

MS1153 MS1153

T7 T7

.625 .625

.770 .770

.406 .406

10.00 10.00

— —

1/8-27 NPT 1/8-27 NPT

-2.0 -2.0

CP..2151 CP..3252

MS1153 MS1155

T7 T15

.750 1.000

.930 1.200

.500 .640

10.00 12.00

— —

1/8-27 NPT 1/4-18 NPT

-2.0 0.0

CP..3252 CP..3252

MS1155 MS1155

T15 T15

catalog number right hand A06SCLPR2

D min

.375

.480

.250

6.00

A08SCLPR2 A10SCLPR2

.500 .625

.600 .770

.312 .406

8.00 10.00

A10SCLPR3 A12SCLPR3

.625 .750

.770 .930

.406 .500

A16SCLPR3 left hand

1.000

1.200

A06SCLPL2 A08SCLPL2

.375 .500

A10SCLPL2 A10SCLPL3 A12SCLPL3 A16SCLPL3

Torx

NOTE: ANSI/ISO compatible 60° countersunk hole insert. This tool will also accept CPGM/CPGT/CPGW-21.5_ inserts. ANSI/ISO compatible 60° countersunk hole insert (i.e., CPMT/CPGT/CPGW-32.5_). 90° countersunk hole inserts (i.e., CPGM/CPGB-32.5_) do not fit this tool.

www.kennametal.com

C101

O.D./I.D. Tooling

A-SCLP -5°

Screw-On Boring Bars Screw-On Inserts

Carbide shank with through coolant. See pages B92–B95 for inserts.

O.D./I.D. Tooling

E-SCLP -5°

catalog number right hand E05KSCLPR18

D min

γF°

gage insert

insert screw

Torx

.313

.415

.219

5.000

.093

-5.0

CP..18151

MS1933

E06SCLPR2 E08SCLPR2

.375 .500

.480 .600

.250 .312

6.000 8.000

.125 .187

-6.0 -2.0

CP..2151 CP..2151

MS1939 MS1153

T7 T7

E10SCLPR2 E10SCLPR3

.625 .625

.770 .770

.406 .406

10.000 10.000

.218 .218

-2.0 -2.0

CP..2151 CP..3252

MS1153 MS1155

T7 T15

E12SCLPR2 E12SCLPR3

.750 .750

.930 .930

.500 .500

10.000 10.000

.281 .281

-2.0 -2.0

CP..2151 CP..3252

MS1153 MS1155

T7 T15

E16SCLPR3 left hand

1.000

1.200

.640

12.000

.312

0.0

CP..3252

MS1155

T15

E05KSCLPL18 E06SCLPL2

.313 .375

.415 .480

.219 .250

5.000 6.000

.093 .125

-5.0 -6.0

CP..18151 CP..2151

MS1933 MS1939

T7 T7

E08SCLPL2 E10SCLPL2

.500 .625

.600 .770

.312 .406

8.000 10.000

.187 .218

-2.0 -2.0

CP..2151 CP..2151

MS1153 MS1153

T7 T7

E10SCLPL3 E12SCLPL2

.625 .750

.770 .930

.406 .500

10.000 10.000

.218 .281

-2.0 -2.0

CP..3252 CP..2151

MS1155 MS1153

T15 T7

E12SCLPL3 E16SCLPL3

.750 1.000

.930 1.200

.500 .640

10.000 12.000

.281 .312

-2.0 0.0

CP..3252 CP..3252

MS1155 MS1155

T15 T15

Necked steel shank with through coolant. See pages B92–B95 for inserts.

A-SCLP -5°

C102

catalog number right hand A0506SCLPR18

D min

gage insert

insert screw

Torx

.375

.415

.219

5.00

1.63

.094

CP..18151

MS1152

left hand A0506SCLPL18

.375

.415

.219

5.00

1.63

.094

CP..18151

MS1152

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B92–B95 for inserts.

catalog number right hand A10SCLPR3AP5

D min

gage insert

insert screw

.625

.770

.406

10.000

1/8-27 NPT

CP..3252

MS1027

A12SCLPR3AP5 A16SCLPR3AP5

.750 1.000

.930 1.190

.500 .625

10.000 12.000

1/8-27 NPT 1/4-18 NPT

CP..3252 CP..3252

MS1027 MS1027

T9 T9

left hand A10SCLPL3AP5

.625

.770

.406

10.000

1/8-27 NPT

CP..3252

MS1027

A12SCLPL3AP5 A16SCLPL3AP5

.750 1.000

.930 1.190

.500 .625

10.000 12.000

1/8-27 NPT 1/4-18 NPT

CP..3252 CP..3252

MS1027 MS1027

T9 T9

Torx

NOTE: 90° countersunk hole insert (i.e., CPGM/CPGB-32.5_) ANSI/ISO compatible 60° countersunk hole insert (i.e., CPMT/CPGT/CPGW-32.5_) do not fit this tool.

Carbide shank with through coolant. See pages B92–B95 for inserts.

E-SCLP-AP -5°

catalog number right hand E12SCLPR3AP5

D min

gage insert

insert screw

insert screw wrench size

.750

1.000

.500

10.000

.281

CP..3252

MS1027

E16SCLPR3AP5 left hand

1.000

1.190

.625

12.000

.312

CP..3252

MS1027

E12SCLPL3AP5 E16SCLPL3AP5

.750 1.000

1.000 1.190

.500 .625

10.000 12.000

.281 .312

CP..3252 CP..3252

MS1027 MS1027

T9 T9

NOTE: 90° countersunk hole insert (i.e., CPGM/CPGB-32.5_) ANSI/ISO compatible 60° countersunk hole insert (i.e., CPMT/CPGT/CPGW-32.5_) do not fit this tool.

www.kennametal.com

C103

O.D./I.D. Tooling

A-SCLP-AP -5°

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B92–B95 for inserts.

O.D./I.D. Tooling

A-SCLP-D -5°

catalog number A08SCLPR2D A10SCLPR2D

D .500 .625

D min .650 .842

F .312 .406

L1 8.00 10.00

CS 1/16-27 NPT 1/8-27 NPT

γF° -3.0 -2.0

gage insert CP..2151 CP..2151

insert screw MS1153 MS1153

Torx T7 T7

A12SCLPR3D

.750

1.030

.500

10.00

1/8-27 NPT

-2.0

CP..3252

MS1155

T15

insert screw

Torx

Heavy metal bar with through coolant. See pages B92–B95 for inserts.

L-SCLP -5°

γF°

gage insert

.219

5.995

.76

.094

-6.0

CP..2151..

MS1939

.250 .312

6.059 7.928

.91 .93

.125 .156

-6.0 -2.0

CP..2151.. CP..2151..

MS1939 MS1153

T7 T7

.770 .770

.406 .406

7.992 8.012

1.03 1.05

.156 .156

-2.0 -2.0

CP..2151.. CP..3252..

MS1153 MS1155

T7 T15

.750 1.000

.930 1.200

.500 .640

7.960 9.941

1.30 1.41

.156 .250

-2.0 0.0

CP..3252.. CP..3252..

MS1155 MS1155

T15 T15

left hand L05MSCLPL2

.313

.415

.219

5.995

.76

.094

-6.0

CP..2151..

MS1939

L06MSCLPL2 L08RSCLPL2

.375 .500

.480 .600

.250 .312

6.059 7.928

.91 .93

.125 .156

-6.0 -2.0

CP..2151.. CP..2151..

MS1939 MS1153

T7 T7

L10RSCLPL2 L10RSCLPL3

.625 .625

.770 .770

.406 .406

7.992 8.012

1.03 1.05

.156 .156

-2.0 -2.0

CP..2151.. CP..3252..

MS1153 MS1155

T7 T15

L12RSCLPL3 L16SSCLPL3

.750 1.000

.930 1.200

.500 .640

7.960 9.941

1.30 1.41

.156 .250

-2.0 0.0

CP..3252.. CP..3252..

MS1155 MS1155

T15 T15

catalog number right hand L05MSCLPR2 L06MSCLPR2 L08RSCLPR2 L10RSCLPR2 L10RSCLPR3

D min

.313

.415

.375 .500

.480 .600

.625 .625

L12RSCLPR3 L16SSCLPR3

C104

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B95–B98 for inserts.

catalog number right hand A06MSDUCR2 A08RSDUCR2 A10SSDUCR2 A12SSDUCR3 A16TSDUCR3

γF°

gage insert

.125

—

-7.0

DC..2151

MS1153

— —

1/16-27 NPT 1/8-27 NPT

-5.0 -4.0

DC..2151 DC..2151

MS1153 MS1153

T7 T7

10.000 12.000

— —

1/8-27 NPT 1/4-18 NPT

-5.0 -3.0

DC..3252 DC..3252

MS1155 MS1155

T15 T15

.375

6.000

.125

—

-7.0

DC..2151

MS1153

.437 .500

8.000 10.000

— —

1/16-27 NPT 1/8-27 NPT

-5.0 -4.0

DC..2151 DC..2151

MS1153 MS1153

T7 T7

.562 .750

10.000 12.000

— —

1/8-27 NPT 1/4-18 NPT

-5.0 -3.0

DC..3252 DC..3252

MS1155 MS1155

T15 T15

γF°

gage insert

insert screw

Torx

D min

.375

.600

.500 .625

.730 .850

.375

6.000

.437 .500

8.000 10.000

.750 1.000

.980 1.300

.562 .750

left hand A06MSDUCL2

.375

.600

A08SDUCL2 A10SSDUCL2

.500 .625

.730 .850

A12SSDUCL3 A16TSDUCL3

.750 1.000

.980 1.300

insert screw

Torx

Steel shank with through coolant. See pages B98–B100 for inserts.

A-SDUP -3°

catalog number right hand A06MSDUPR2

D min

.375

.600

.375

6.000

.125

—

-3.0

DP..2151

MS1153

A08RSDUPR2 A10SSDUPR2

.500 .625

.730 .850

.437 .500

8.000 10.000

— —

1/16-27 NPT 1/8-27 NPT

0.0 0.0

DP..2151 DP..2151

MS1153 MS1153

T7 T7

A12SSDUPR3 A16TSDUPR3

.750 1.000

.980 1.300

.562 .750

10.000 12.000

— —

1/8-27 NPT 1/4-18 NPT

0.0 0.0

DP..3252 DP..3252

MS1155 MS1155

T15 T15

left hand A06MSDUPL2

.375

.600

.375

6.000

.125

—

-3.0

DP..2151

MS1153

A08RSDUPL2 A10SSDUPL2

.500 .625

.730 .850

.437 .500

8.000 10.000

— —

1/16-27 NPT 1/8-27 NPT

0.0 0.0

DP..2151 DP..2151

MS1153 MS1153

T7 T7

A12SSDUPL3 A16TSDUPL3

.750 1.000

.980 1.300

.562 .750

10.000 12.000

— —

1/8-27 NPT 1/4-18 NPT

0.0 0.0

DP..3252 DP..3252

MS1155 MS1155

T15 T15

www.kennametal.com

C105

O.D./I.D. Tooling

A-SDUC -3°

Screw-On Boring Bars Screw-On Inserts

Carbide shank with through coolant. See pages B98–B100 for inserts.

O.D./I.D. Tooling

E-SDUP -3°

catalog number right hand E06SDUPR2

D min

γF°

gage insert

insert screw

.375

.600

.375

6.000

.125

-2.0

DP..2151

MS1153

E08SDUPR2 E10SDUPR2

.500 .625

.730 .850

.437 .500

8.000 10.000

.187 .218

0.0 0.0

DP..2151 DP..2151

MS1153 MS1153

T7 T7

E12SDUPR2 E12SSDUPR3

.750 .750

.980 .980

.562 .562

10.000 10.000

.281 .281

0.0 0.0

DP..2151 DP..3252

MS1153 MS1155

T7 T15

E16TSDUPR3 left hand

1.000

1.300

.750

12.000

.312

0.0

DP..3252

MS1155

T15

E06SDUPL2 E08SDUPL2

.375 .500

.600 .730

.375 .437

6.000 8.000

.125 .187

-2.0 0.0

DP..2151 DP..2151

MS1153 MS1153

T7 T7

E10SDUPL2 E12SDUPL2

.625 .750

.850 .980

.500 .562

10.000 10.000

.218 .281

0.0 0.0

DP..2151 DP..2151

MS1153 MS1153

T7 T7

E12SSDUPL3 E16TSDUPL3

.750 1.000

.980 1.300

.562 .750

10.000 12.000

.281 .312

0.0 0.0

DP..3252 DP..3252

MS1155 MS1155

T15 T15

γF°

gage insert

insert screw

Torx

Heavy metal bar with through coolant. See pages B98–B100 for inserts.

L-SDUP -3°

C106

catalog number right hand L06MSDUPR2

D min

.375

.600

.375

6.059

.91

.125

-2.0

DP..2151..

MS1153

L08RSDUPR2 L10RSDUPR2

.500 .625

.730 .850

.437 .500

7.928 7.992

.93 1.03

.156 .156

0.0 0.0

DP..2151.. DP..2151..

MS1153 MS1153

T7 T7

L12RSDUPR3 left hand

.750

.980

.562

7.960

1.30

.156

0.0

DP..3252..

MS1155

T15

L06MSDUPL2 L08RSDUPL2

.375 .500

.600 .730

.375 .437

6.059 7.928

.91 .93

.125 .156

-2.0 0.0

DP..2151.. DP..2151..

MS1153 MS1153

T7 T7

L10RSDUPL2 L12RSDUPL3

.625 .750

.850 .980

.500 .562

7.992 7.960

1.03 1.30

.156 .156

0.0 0.0

DP..2151.. DP..3252..

MS1153 MS1155

T7 T15

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B95–B98 for inserts.

γF°

gage insert

insert screw

Torx

.187

8.50

1/16-27 NPT

-6.0

DC..2151

MS1153

.187 .187

10.50 10.63

1/8-27 NPT 1/8-27 NPT

-5.0 -5.0

DC..2151 DC..3252

MS1153 MS1155

T7 T15

12.00

.250

12.63

1/4-18 NPT

-3.0

DC..3252

MS1155

T15

.437 .500

8.00 10.00

.187 .187

8.50 10.50

1/16-27 NPT 1/8-27 NPT

-6.0 -5.0

DC..2151 DC..2151

MS1153 MS1153

T7 T7

.980 1.300

.562 .750

10.00 12.00

.187 .250

10.63 12.63

1/8-27 NPT 1/4-18 NPT

-5.0 -3.0

DC..3252 DC..3252

MS1155 MS1155

T15 T15

gage insert

insert screw

Torx

catalog number right hand A08RSDXCR2

D min

.500

.730

A10SSDXCR2 A12SSDXCR3

.625 .750

.850 .980

.437

8.00

.500 .562

10.00 10.00

A16TSDXCR3 left hand

1.000

1.300

.750

A08RSDXCL2 A10SSDXCL2

.500 .625

.730 .850

A12SSDXCL3 A16TSDXCL3

.750 1.000

Steel shank with through coolant. See pages B98–B100 for inserts.

A-SDXP-5°

catalog number right hand A08RSDXPR2

D min

.500

.730

.437

8.00

8.50

2.79

.187

1/16-27 NPT

DP..2151

MS1153

A10SSDXPR2 A12SSDXPR3

.625 .750

.850 .980

.500 .562

10.00 10.00

10.50 10.75

2.31 2.29

.187 .187

1/8-27 NPT 1/8-27 NPT

DP..2151 DP..3252

MS1153 MS1155

T7 T15

A16TSDXPR3 left hand

1.000

1.300

.750

12.00

12.75

4.62

.250

1/4-18 NPT

DP..3252

MS1155

T15

A08RSDXPL2 A10SSDXPL2

.500 .625

.730 .850

.437 .500

8.00 10.00

8.50 10.50

2.79 2.31

.187 .187

1/16-27 NPT 1/8-27 NPT

DP..2151 DP..2151

MS1153 MS1153

T7 T7

A12SSDXPL3 A16TSDXPL3

.750 1.000

.980 1.300

.562 .750

10.00 12.00

10.75 12.75

2.29 4.62

.187 .250

1/8-27 NPT 1/4-18 NPT

DP..3252 DP..3252

MS1155 MS1155

T15 T15

www.kennametal.com

C107

O.D./I.D. Tooling

A-SDXC -5°

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B105–B108 for inserts.

O.D./I.D. Tooling

A-STFC 0°

γF°

gage insert

insert screw

Torx

.125

—

-8.0

TC..2151

MS1153

— —

1/16-27 NPT 1/8-27 NPT

-7.0 -5.0

TC..2151 TC..2151

MS1153 MS1153

T7 T7

— —

1/8-27 NPT 1/4-18 NPT

-5.0 -4.0

TC..3252 TC..3252

MS1155 MS1155

T15 T15

catalog number right hand A06MSTFCR2

D min

.375

.480

.250

6.00

A08RSTFCR2 A10SSTFCR2

.500 .625

.600 .770

.312 .406

8.00 10.00

A12STFCR3 A16STFCR3

.750 1.000

.930 1.200

.500 .640

10.00 12.00

left hand A08RSTFCL2

.500

.600

.312

8.00

—

1/16-27 NPT

-7.0

TC..2151

MS1153

A10SSTFCL2 A12STFCL3

.625 .750

.770 .930

.406 .500

10.00 10.00

— —

1/8-27 NPT 1/8-27 NPT

-5.0 -5.0

TC..2151 TC..3252

MS1153 MS1155

T7 T15

A16STFCL3

1.000

1.200

.640

12.00

—

1/4-18 NPT

-4.0

TC..3252

MS1155

T15

Steel shank with through coolant. See page B109 for inserts.

A-STFD 0°

C108

catalog number right hand A04HSTFDR128

D min

.250

.296

.260

.156

4.00

A05HSTFDR128

.312

.358

.322

.187

4.00

gage insert

insert screw

Torx

.040

TDHB12807501

FC14

.060

TDHB12807501

FC14

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Carbide shank with through coolant. See page B109 for inserts.

D min

gage insert

insert screw

.188

.275

.203

.134

4.00

.040

TD..12807505

FC11

.250 .250

.300 .300

.260 .260

.156 .156

4.00 6.00

.047 .047

TD..12807505 TD..12807505

FC11 FC11

T7 T7

.360 .360

.322 .322

.187 .187

4.00 6.00

.093 .093

TD..12807505 TD..12807505

FC11 FC11

T7 T7

catalog number right hand E03HSTFDR128

E04HSTFDR128 E04MSTFDR128 E05HSTFDR128 E05MSTFDR128

.313 .313

Torx

Steel shank with through coolant. See pages B109–B112 for inserts.

A-STFP 0°

catalog number right hand A05STFPR18

D min

γF°

gage insert

insert screw

Torx

.313

.415

—

.219

5.00

—

.094

—

-8.0

A06STFPR2 A08RSTFPR2

.375 .500

.480 .600

— —

.250 .312

6.00 8.00

— —

.125 —

— 1/16-27 NPT

-4.0 -2.0

TP..18151

MS1933

TP..2151 TP..2151

MS1153 MS1153

T7 T7

A10STFPR2 A12STFPR3

.625 .750

.770 .930

— —

.406 .500

10.00 10.00

— —

1/8-27 NPT 1/8-27 NPT

0.0 -2.0

TP..2151 TP..3252

MS1153 MS1155

T7 T15

A16STFPR3 left hand

1.000

1.200

—

.640

12.00

—

1/4-18 NPT

0.0

TP..3252

MS1155

T15

A06STFPL2 A08STFPL2

.375 .500

.480 .600

— —

.250 .312

6.00 8.00

— —

.125 —

— 1/16-27 NPT

-4.0 -2.0

TP..2151 TP..2151

MS1153 MS1153

T7 T7

A12STFPL3

.750

.930

—

.500

10.00

—

1/8-27 NPT

-2.0

TP..3252

MS1155

T15

NOTE: ANSI/ISO compatible 60° countersunk hole insert. This tool will also accept TPGM/TPGT/TPGW-21.5_ inserts. ANSI/ISO compatible 60° countersunk hole insert (i.e., TPMT/TPGT/TPGW-32.5_). 90° countersunk hole inserts (i.e., TPGM/TPGB-32.5_) do not fit this tool.

www.kennametal.com

C109

O.D./I.D. Tooling

E-STFD 0°

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B109–B112 for inserts.

O.D./I.D. Tooling

A-STFP 0°

catalog number right hand A0506STFPR18

D min

γF°

gage insert

insert screw

Torx

.375

.415

.219

5.000

.094

—

-8.0

TP..18151

MS1152

insert screw

Torx

NOTE: ANSI/ISO compatible 60° countersunk hole insert (i.e., CPMT/CPGT/CPGW32.5). 90° countersunk hole inserts (i.e., CPGM/CPGB 32.5) do not fit this tool.

Heavy metal bar with through coolant. See pages B109–B112 for inserts.

L-STFP 0°

catalog number right hand L06MSTFPR2

D min

γF°

gage insert

.375

.480

.250

6.059

.91

.125

-4.0

TP..2151

MS1153

L08RSTFPR2 L10RSTFPR2

.500 .625

.600 .770

.312 .406

7.928 8.082

.93 1.12

.156 .156

-2.0 0.0

TP..2151 TP..2151

MS1153 MS1153

T7 T7

L12RSTFPR3 left hand

.750

.930

.500

8.050

1.39

.156

-2.0

TP..3252

MS1155

T15

L06MSTFPL2 L08RSTFPL2

.375 .500

.480 .600

.250 .312

6.059 7.928

.91 .93

.125 .156

-4.0 -2.0

TP..2151 TP..2151

MS1153 MS1153

T7 T7

L12RSTFPL3

.750

.930

.500

8.050

1.39

.156

-2.0

TP..3252

MS1155

T15

C110

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Carbide shank with through coolant. See pages B109–B112 for inserts.

γF°

gage insert

.093

-5.0

.125 .187

-4.0 -2.0

.218 .281

12.000

.219 .250

.600 .770 .930 1.200

D min

insert screw

Torx

TP..18151

MS1152

TP..2151 TP..2151

MS1153 MS1153

T7 T7

0.0 -2.0

TP..2151 TP..3252

MS1153 MS1155

T7 T15

.312

0.0

TP..3252

MS1155

T15

5.000 6.000

.093 .125

-5.0 -4.0

TP..18151 TP..2151

MS1152 MS1153

T7 T7

.312 .406

8.000 10.000

.187 .218

-2.0 0.0

TP..2151 TP..2151

MS1153 MS1153

T7 T7

.500 .640

10.000 12.000

.281 .312

-2.0 0.0

TP..3252 TP..3252

MS1155 MS1155

T15 T15

catalog number right hand E05STFPR18

.313

.415

.219

5.000

E06STFPR2 E08STFPR2

.375 .500

.480 .600

.250 .312

6.000 8.000

E10STFPR2 E12STFPR3

.625 .750

.770 .930

.406 .500

10.000 10.000

E16STFPR3 left hand

1.000

1.200

.640

E05STFPL18 E06STFPL2

.313 .375

.415 .480

E08STFPL2 E10STFPL2

.500 .625

E12STFPL3 E16STFPL3

.750 1.000

Steel shank with through coolant. See pages B105–B108 for inserts.

A-STLC -5°

catalog number right hand A06STLCR2

.375

A08STLCR2 A10STLCR2

.500 .625

A12STLCR3 A16STLCR3

.750 1.000

left hand A06STLCL2 A08STLCL2 A10STLCL2 A12STLCL3 A16STLCL3

www.kennametal.com

D min

γF°

gage insert

.125

—

-8.0

TC..2151

MS1153

— —

1/16-27 NPT 1/8-27 NPT

-7.0 -5.0

TC..2151 TC..2151

MS1153 MS1153

T7 T7

10.000 12.000

— —

1/8-27 NPT 1/4-18 NPT

-5.0 -4.0

TC..3252 TC..3252

MS1155 MS1155

T15 T15

.250

6.000

.125

—

-8.0

TC..2151

MS1153

.312 .406

8.000 10.000

— —

1/16-27 NPT 1/8-27 NPT

-7.0 -5.0

TC..2151 TC..2151

MS1153 MS1153

T7 T7

.500 .640

10.000 12.000

— —

1/8-27 NPT 1/4-18 NPT

-5.0 -4.0

TC..3252 TC..3252

MS1155 MS1155

T15 T15

.480

.250

6.000

.600 .770

.312 .406

8.000 10.000

.930 1.200

.500 .640

.375

.480

.500 .625

.600 .770

.750 1.000

.930 1.200

insert screw

Torx

C111

O.D./I.D. Tooling

E-STFP 0°

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See page B109 for inserts.

O.D./I.D. Tooling

A-STLD -5°

catalog number right hand A03GSTLDR128

D min

gage insert

insert screw

.187

.275

.197

.126

3.50

.040

TD..12807505

FC11

A04HSTLDR128 A05HSTLDR128

.250 .313

.296 .358

.260 .322

.156 .187

4.00 4.00

.040 .060

TD..130805 TD..130805

FC14 FC14

T7 T7

insert screw

Torx

Carbide shank with through coolant. See page B109 for inserts.

E-STLD -5°

C112

catalog number right hand E03HSTLDR128

D min

gage insert

.188

.275

.197

.126

4.000

.040

TD..12807505

FC11

E03MSTLDR128 E04HSTLDR128

.188 .250

.275 .296

.197 .260

.126 .156

6.000 4.000

.040 .047

TD..12807505 TD..130805

FC11 FC14

T7 T7

E04MSTLDR128 E05HSTLDR128

.250 .312

.300 .358

.260 —

.156 .187

6.000 4.000

.047 .093

TD..12807505 TD..130805

FC14 FC14

T7 T7

E05MSTLDR128 left hand

.313

.360

.322

.187

6.000

.093

TD..12807505

FC14

E03HSTLDL128 E04MSTLDL128

.188 .250

.275 .300

.197 .260

.126 .156

4.000 6.000

.040 .047

TD..12807505 TD..12807505

FC11 FC14

T7 T7

E05MSTLDL128

.313

.360

.322

.187

6.000

.093

TD..12807505

FC14

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B109–B112 for inserts.

γF°

gage insert

.125

—

-4.0

— —

1/16-27 NPT 1/8-27 NPT

-2.0 0.0

10.000 12.000

— —

1/8-27 NPT 1/4-18 NPT

-2.0 0.0

.250

6.000

.125

—

.312 .406

8.000 10.000

— —

1/16-27 NPT 1/8-27 NPT

10.000 12.000

— —

1/8-27 NPT 1/4-18 NPT

-2.0 0.0

catalog number right hand A06STLPR2

D min

.375

.480

.250

6.000

A08STLPR2 A10STLPR2

.500 .625

.600 .770

.312 .406

8.000 10.000

A12STLPR3 A16STLPR3

.750 1.000

.930 1.220

.500 .640

left hand A06STLPL2

.375

.480

A08STLPL2 A10STLPL2

.500 .625

.600 .770

A12STLPL3 A16STLPL3

.750 1.000

.930 1.220

.500 .640

insert screw

Torx

TP..2151

MS1153

TP..2151 TP..2151

MS1153 MS1153

T7 T7

TP..3252 TP..3252

MS1155 MS1155

T15 T15

-4.0

TP..2151

MS1153

-2.0 0.0

TP..2151 TP..2151

MS1153 MS1153

T7 T7

TP..3252 TP..3252

MS1155 MS1155

T15 T15

Carbide shank with through coolant. See pages B109–B112 for inserts.

E-STLP -5°

catalog number right hand E06STLPR2

D min

γF°

gage insert

insert screw

Torx

.375

.480

.250

6.000

.125

-4.0

TP..2151

MS1153

E08STLPR2 E10STLPR2

.500 .625

.600 .770

.312 .406

8.000 10.000

.187 .218

-2.0 0.0

TP..2151 TP..2151

MS1153 MS1153

T7 T7

E12STLPR3 E16STLPR3

.750 1.000

.930 1.220

.500 .640

10.000 12.000

.281 .312

-2.0 0.0

TP..3252 TP..3252

MS1155 MS1155

T15 T15

left hand E06STLPL2

.375

.480

.250

6.000

.125

-4.0

TP..2151

MS1153

E08STLPL2 E10STLPL2

.500 .625

.600 .770

.312 .406

8.000 10.000

.187 .218

-2.0 0.0

TP..2151 TP..2151

MS1153 MS1153

T7 T7

E12STLPL3 E16STLPL3

.750 1.000

.930 1.220

.500 .640

10.000 12.000

.281 .312

-2.0 0.0

TP..3252 TP..3252

MS1155 MS1155

T15 T15

www.kennametal.com

C113

O.D./I.D. Tooling

A-STLP -5°

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B113–B114 for inserts.

O.D./I.D. Tooling

A-SVMB -5°

catalog number A08RSVMBR2E A10SSVMBR2E

D .500 .625

D min .980 .980

F .312 .406

L1 8.000 10.000

CS 1/16-27 NPT 1/8-27 NPT

gage insert VB..221 VB..221

insert screw MS1153 MS1153

Torx T7 T7

A12SSVMBR3E A16TSVMBR3E

.750 1.000

1.286 1.286

.500 .640

10.000 12.000

1/8-27 NPT 1/4-18 NPT

VB..332 VB..332

MS1155 MS1155

T15 T15

insert screw

Torx

Steel shank with through coolant. See pages B113–B114 for inserts.

A-SVQB -17.5°

catalog number right hand A10SSVQBR2

D min

gage insert

.625

.850

.500

10.00

1/8-27 NPT

VB..221

MS1153

A12SSVQBR2 A16TSVQBR3

.750 1.000

.980 1.300

.562 .750

10.00 12.00

1/8-27 NPT 1/4-18 NPT

VB..221 VB..332

MS1153 MS1155

T7 T15

left hand A10SSVQBL2

.625

.850

.500

10.00

1/8-27 NPT

VB..221

MS1153

A12SSVQBL2 A16TSVQBL3

.750 1.000

.980 1.300

.562 .750

10.00 12.00

1/8-27 NPT 1/4-18 NPT

VB..221 VB..332

MS1153 MS1155

T7 T15

Necked steel shank with through coolant. See pages B113–B114 for inserts.

A-SVSP -10° catalog number A2732SVSPRW4

C114

D 2.000

D min 2.200

D2 1.688

F 1.080

L1 14.00

L2 5.31

CS 1/4-18 NPT

gage insert VP..443K

insert screw S411

hex (inch) 5/32

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See pages B113–B114 for inserts.

catalog number right hand A12SSVUBR2

D min

gage insert

insert screw

Torx

.750

.980

.562

10.00

1/8-27 NPT

VB..221

MS1153

A16TSVUBR3 left hand

1.000

1.300

.750

12.00

1/4-18 NPT

VB..332

MS1155

T15

A12SSVUBL2 A16TSVUBL3

.750 1.000

.980 1.300

.562 .750

10.00 12.00

1/8-27 NPT 1/4-18 NPT

VB..221 VB..332

MS1153 MS1155

T7 T15

γF°

gage insert

insert screw

Torx

Steel shank with through coolant. See pages B114–B115 for inserts.

A-SWLC -5°

catalog number right hand A06SWLCR2

D min

.375

.480

.250

6.000

.130

—

-8.0

WC..2151

MS1939

A08SWLCR2 A10SWLCR3

.500 .625

.600 .770

.312 .406

8.000 10.000

— —

1/16-27 NPT 1/8-27 NPT

-6.0 -7.0

WC..2151 WC..3252

MS1153 MS1155

T7 T15

A12SWLCR3 left hand

.750

.930

.500

10.000

—

1/8-27 NPT

-5.0

WC..3252

MS1155

T15

A06SWLCL2 A08SWLCL2

.375 .500

.480 .600

.250 .312

6.000 8.000

.130 —

— 1/16-27 NPT

-8.0 -6.0

WC..2151 WC..2151

MS1939 MS1153

T7 T7

www.kennametal.com

C115

O.D./I.D. Tooling

A-SVUB -3°

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See page B115 for inserts.

O.D./I.D. Tooling

A-SWLP -5°

catalog number right hand A06SWLPR2

A08SWLPR2 A10SWLPR3 A12SWLPR3 A16SWLPR3

.750 1.000

γF°

gage insert

.125

—

-7.0

WP..2151

MS1939

— —

1/16-27 NPT 1/8-27 NPT

-2.0 -3.0

WP..2151 WP..3252

MS1153 MS1155

T7 T15

10.00 12.00

— —

1/8-27 NPT 1/4-18 NPT

-2.0 0.0

WP..3252 WP..3252

MS1155 MS1155

T15 T15

D min

.375

.480

.250

6.00

.500 .625

.600 .770

.312 .406

8.00 10.00

.930 1.200

.500 .640

insert screw

Torx

left hand A06SWLPL2

.375

.480

.250

6.00

.125

—

-7.0

WP..2151

MS1939

A08SWLPL2 A10SWLPL3

.500 .625

.600 .770

.312 .406

8.00 10.00

— —

1/16-27 NPT 1/8-27 NPT

-2.0 -3.0

WP..2151 WP..3252

MS1153 MS1155

T7 T15

A12SWLPL3

.750

.930

.500

10.00

—

1/8-27 NPT

-2.0

WP..3252

MS1155

T15

Necked steel shank with through coolant. See page B115 for inserts.

A-SWLP -5°

C116

catalog number right hand A0306SWLPR15

D min

γF°

gage insert

insert screw

Torx

.375

.260

.187

.126

3.50

1.00

.078

-10.0

A0406SWLPR15 A0506SWLPR15

.375 .375

.321 .415

.234 .299

.156 .219

4.00 5.00

1.25 1.63

.078 .094

-8.0 -4.0

WP..15121

MS1438

WP..15121 WP..15121

MS1438 MS1438

T5 T5

left hand A0306SWLPL15

.375

.260

.187

.126

3.50

1.00

.078

-10.0

WP..15121

MS1438

www.kennametal.com

Screw-On Boring Bars Screw-On Inserts

Carbide shank with through coolant. See page B115 for inserts.

catalog number right hand E03SWLPR15

D min

γF°

gage insert

.188

.260

4.000

.040

-10.0

WP..15121

MS1438

E04SWLPR15 E05SWLPR15

.250 .313

.321 .415

.156 .219

4.015 5.000

.047 .093

-8.0 -4.0

WP..15121 WP..15121

MS1438 MS1438

T5 T5

E06SWLPR2 E08SWLPR2

.375 .500

.480 .600

.250 .312

6.000 8.000

.125 .187

-4.0 -2.0

WP..2151 WP..2151

MS1153 MS1153

T7 T7

E10SWLPR3 E12SWLPR3

.625 .750

.770 .930

.406 .500

10.000 10.000

.218 .281

-3.0 -2.0

WP..3252 WP..3252

MS1155 MS1155

T15 T15

E16SWLPR3 left hand

1.000

1.200

.640

12.000

.312

0.0

WP..3252

MS1155

T15

E03SWLPL15 E04SWLPL15

.188 .250

.260 .321

.126 .156

4.000 4.000

.040 .047

-10.0 -8.0

WP..15121 WP..15121

MS1438 MS1438

T5 T5

E05SWLPL15 E06SWLPL2

.313 .375

.415 .480

.219 .250

5.000 6.000

.093 .125

-4.0 -4.0

WP..15121 WP..2151

MS1438 MS1153

T5 T7

E08SWLPL2 E10SWLPL3

.500 .625

.600 .770

.312 .406

8.000 10.000

.187 .218

-2.0 -3.0

WP..2151 WP..3252

MS1153 MS1155

T7 T15

E12SWLPL3 E16SWLPL3

.750 1.000

.930 1.200

.500 .640

10.000 12.000

.281 .312

-2.0 0.0

WP..3252 WP..3252

MS1155 MS1155

T15 T15

www.kennametal.com

insert screw

Torx

C117

O.D./I.D. Tooling

E-SWLP -5°

Screw-On Boring Bars Screw-On Inserts

Steel shank with through coolant. See page B115 for inserts.

O.D./I.D. Tooling

A-SWUP -3°

catalog number right hand A04HSWUPR15

D min

gage insert

insert screw

.250

.285

.260

.143

4.00

.040

WP..1511

CT11

A05HSWUPR15

.312

.347

.322

.174

4.00

.040

WP..1511

CT15

gage insert

insert screw

Torx

Carbide shank with through coolant. See page B115 for inserts.

E-SWUP -3°

C118

catalog number right hand E03MSWUPR15

D min

.187

.260

.225

.126

6.00

.040

WP..15105

CT15

E04MSWUPR15 E05MSWUPR15

.250 .312

.285 .347

— .322

.143 .174

6.00 6.00

.047 .093

WP..S30104 WP..15105

CT11 CT15

T6 T6

E06MSWUPR2 E08RSWUPR2

.375 .500

.415 .540

.385 .510

.211 .273

6.00 8.00

.125 .500

WP..21505 WP..21505

MS1153 MS1153

T7 T7

www.kennametal.com

Interchangeable Heads Boring Adapters

CS D

Steel shank with through coolant. Max 4:1 overhang ratio.

catalog number S4416W S4420W

D 1.000 1.250

L1 9.00 9.00

CS 1/4-18NPT 1/4-18NPT

screw 3 required S319PKG S327

screw S322 S330

hex (inch) 9/64 5/32

S4424W S4428W

1.500 1.750

10.00 12.00

1/4-18NPT 1/4-18NPT

S327 S337

S330 S340

5/32 3/16

S4432W S4440W

2.000 2.500

13.00 17.00

1/4-18NPT 1/4-18 NPT

S337 S350

S340 S353

3/16 1/4

O.D./I.D. Tooling

S-4400W

L20 L2

CS D

Steel shank with through coolant. Max 4:1 overhang ratio.

S-4400W48 catalog number S4440W48

D 3.000

L1 18.00

CS 3/8-18NPT

L2 3.00

L20 6.00

D1 2.50

screw 3 required S350

screw S353

hex (inch) 1/4

CS D

Carbide shank with through coolant. Max 6:1 overhang ratio.

C-11800W catalog number C11816W C11820W

www.kennametal.com

D 1.000 1.250

L1 11.00 11.00

CS 1/4-18NPT 1/4-18NPT

screw 3 required S319PKG S412

screw S322 S415

hex (inch) 9/64 5/32

C119

Interchangeable Heads Boring Adapters L12

CS D

Steel shank DeVibrator with through coolant. Max 6:1 overhang ratio.

D-5400W D 1.250 1.500

L1 10.00 12.00

CS 3/8-18NPT 3/8-18NPT

L12 7.75 9.25

L1 min 7.00 8.00

screw 3 required S327 S327

screw S330 S330

hex (inch) 5/32 5/32

D5428W D5432W

1.750 2.000

14.00 16.00

3/8-18NPT 3/8-18NPT

10.12 12.75

9.00 10.00

S337 S337

S340 S340

3/16 3/16

D5440W

2.500

20.00

3/8-18NPT

14.87

12.00

S350

S353

1/4

O.D./I.D. Tooling

catalog number D5420W D5424W

L12

Carbide shank DeVibrator with through coolant. Max 8:1 overhang ratio.

C-6400 catalog number C6420

D 1.250

L1 11.00

L12 8.75

screw 3 required S412

L1 min 7.00

screw S415

hex (inch) 5/32

L12

CS D

Carbide shank DeVibrator with through coolant. Max 8:1 overhang ratio.

C-6400W catalog number C6420W C6424W

D 1.250 1.500

L1 11.00 14.00

CS 1/4-28UNF 1/4-28UNF

L12 8.75 11.25

L1 min 7.00 8.00

screw 3 required S412 S412

screw S415 S415

hex (inch) 5/32 5/32

C6428W C6432W

1.750 2.000

16.00 19.00

3/8-24UNF 3/8-24UNF

11.38 15.75

9.00 10.00

S422 S422

S425 S425

3/16 3/16

C6440W

2.500

24.00

3/8-24UNF

18.00

12.00

S432

S435

1/4

L12

CS D

Composite shank DeVibrator with through coolant. Max 10:1 overhang ratio.

C-11900W

C120

catalog number C11924W C11928W

D 1.500 1.750

L1 15.00 17.00

CS 3/8-18NPT 3/8-18NPT

L12 7.75 8.25

screw 3 required S327 S337

screw S330 S340

hex (inch) 5/32 3/16

C11932W C11940W

2.000 2.500

20.00 25.00

3/8-18NPT 3/8-18NPT

9.75 11.75

S337 S350

S340 S353

3/16 1/4

www.kennametal.com

Interchangeable Heads • Tunable Boring Bars Boring Adapters • Carbide Tunable Boring Bar with KM™ Quick Change Connection L12

CS D

Tunable steel shank with through coolant.

catalog number D16TTB16 D20TTB18

D 1.000 1.250

L1 15.000 16.125

CS 1/4-18NPT 1/4-18NPT

L12 8.000 10.000

L1 min 9.086 9.590

screw 3 required S316 S325

screw S321 S329

hex (inch) 9/64 5/32

D24TTB21 D28TTB25

1.500 1.750

19.375 23.375

1/4-18NPT 1/4-18NPT

12.000 15.750

11.038 12.350

S327 S337

S330 S340

5/32 3/16

D32TTB28 D40TTB35

2.000 2.500

26.375 33.375

1/4-18NPT 1/4-18NPT

18.500 24.750

12.266 14.880

S337 S350

S340 S353

3/16 1/4

D48TTB42 D64TTB56

3.000 4.000

40.370 54.480

1/4-18NPT 3/8-18NPT

24.000 20.000

20.000 25.760

S350 S350

S353 S353

1/4 1/4

O.D./I.D. Tooling

D...TTB • Inch

NOTE: Order number 1309256 and order number 1909159 use 2.5" diameter heads.

Tunable steel shank with through coolant and front end KM™ clamping unit.

D...TTB-KM • Inch catalog number D28TTB26KM40 D32TTB29KM40

D 1.750 2.000

L1 24.440 27.440

CS 1/4 - 18 NPT 1/4 - 18 NPT

L12 15.750 18.500

CSWS system size KM40 KM40

L1 min 13.500 13.380

D40TTB36KM40 D48TTB45KM63

2.500 3.000

34.450 42.230

1/4 - 18 NPT 1/4 - 18 NPT

24.750 24.000

KM40 KM63

16.000 21.700

D64TTB58KM63

4.000

56.240

3/8 - 18 NPT

20.000

KM63

27.620

Carbide tunable boring bar with KM™ Quick Change connection.

G-KM-TTB • Inch order number 3954294 3954295

catalog number G32TTB41KM40 G40TTB51KM40

D 2.00 2.50

L1 39.45 49.45

CS 3/8 - 18 NPT 3/8 - 18 NPT

L12 12.00 15.00

CSWS system size KM40 KM40

3954296 3954297

G48TTB63KM63 G64TTB83KM63

3.00 4.00

58.56 76.56

3/8 - 18 NPT 3/8 - 18 NPT

18.00 24.00

KM63 KM63

www.kennametal.com

C121

Kenloc™ Boring Heads Kenloc Inserts

With through coolant. See pages B40–B49 for inserts.

O.D./I.D. Tooling

H-MCFN 0°

catalog number right hand H20MCFNR4

D min

γF°

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.250

.765

1.625

1.470

-14.0

CN..432

ICSN433

KL46

3/32

CK20

STC20

1/8

H24MCFNR4 H32MCFNR5

1.500 2.000

.890 1.281

1.625 1.625

1.760 2.400

-12.0 -10.0

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

3/32 1/8

CK20 CK12

STC20 STC4

1/8 5/32

H40MCFNR6 left hand

2.500

1.531

1.625

3.030

-10.0

CN..643

ICSN633

KL68

9/64

CK12

STC4

5/32

H24MCFNL4

1.500

.890

1.625

1.760

-12.0

CN..432

ICSN433

KL46

3/32

CK20

STC20

1/8

With through coolant. See pages B40–B49 for inserts.

H-MCKN 15°

D min

γF°

gage insert

shim

.890

1.625 .120

1.760

-12.0

CN..432

ICSN433

1.281 1.281

1.625 .120 1.625 .149

2.400 2.400

-12.0 -12.0

CN..432 CN..543

ICSN433 ICSN533

1.625 .149 1.625 .182

3.030 3.030

-10.0 -10.0

CN..543 CN..643

ICSN533 ICSN633

KL58 KL68

1.500

H32MCKNR4 H32MCKNR5

2.000 2.000

H40MCKNR5 H40MCKNR6

2.500 2.500

1.531 1.531

C122

L1A

catalog number right hand H24MCKNR4

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

KL46

3/32

CK20

STC20

1/8

KL46 KL58

3/32 1/8

CK20 CK21

STC20 STC20

1/8 1/8

1/8 9/64

CK12 CK12

STC4 STC4

5/32 5/32

left hand H24MCKNL4

1.500

.890

1.625 .120

1.760

-12.0

CN..432

ICSN433

KL46

3/32

CK20

STC20

1/8

H32MCKNL4 H32MCKNL5

2.000 2.000

1.281 1.281

1.625 .120 1.625 .149

2.400 2.400

-10.0 -12.0

CN..432 CN..543

ICSN433 ICSN533

KL46 KL58

3/32 1/8

CK20 CK21

STC20 STC20

1/8 1/8

H40MCKNL5

2.500

1.531

1.625 .149

3.030

-10.0

CN..543

ICSN533

KL58

1/8

CK12

STC4

5/32

www.kennametal.com

Kenloc™ Boring Heads Kenloc Inserts

With through coolant. See pages B40–B49 for inserts.

D min

γF°

gage insert

shim

lock pin

1.625

1.200

-10.0

1.625 1.625

1.200 1.470

-14.0 -14.0

CN..322

—

KL33

5/64

CK6

STC5

3/32

CN..432 CN..432

— ICSN433

KL44 KL46

3/32 3/32

CK7 CK20

STC9 STC20

3/32 1/8

1.625 1.625

1.760 2.010

-12.0 -10.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

1.281 1.531

1.625 1.625

2.400 3.030

-12.0 -8.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

1.500 2.000

.890 1.281

1.625 1.625

1.760 2.400

-12.0 -12.0

CN..543 CN..543

ICSN533 ICSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

H40MCLNR5 H32MCLNR6

2.500 2.000

1.531 1.281

1.625 1.625

3.030 2.400

-8.0 -12.0

CN..543 CN..643

ICSN533 ICSN633

KL58 KL68

1/8 9/64

CK12 CK12

STC4 STC4

5/32 5/32

H36MCLNR6 H40MCLNR6

2.250 2.500

1.406 1.531

1.625 1.625

2.650 3.030

-10.0 -10.0

CN..643 CN..643

ICSN633 ICSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

left hand H16MCLNL3

1.000

.640

1.625

1.200

-10.0

CN..322

—

KL33

5/64

CK6

STC5

3/32

H16MCLNL4 H20MCLNL4

1.000 1.250

.640 .765

1.625 1.625

1.200 1.470

-14.0 -14.0

CN..432 CN..432

— ICSN433

KL44 KL46

3/32 3/32

CK7 CK20

STC9 STC20

3/32 1/8

H24MCLNL4 H28MCLNL4

1.500 1.750

.890 1.015

1.625 1.625

1.760 2.010

-12.0 -12.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

H32MCLNL4 H40MCLNL4

2.000 2.500

1.281 1.531

1.625 1.625

2.400 3.030

-12.0 -8.0

CN..432 CN..432

ICSN433 ICSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

H24MCLNL5 H32MCLNL5

1.500 2.000

.890 1.281

1.625 1.625

1.760 2.400

-12.0 -12.0

CN..543 CN..543

ICSN533 ICSN533

KL58 KL58

1/8 1/8

CK12 CK12

STC4 STC4

5/32 5/32

H40MCLNL5 H32MCLNL6

2.500 2.000

1.531 1.281

1.625 1.625

3.030 2.400

-8.0 -12.0

CN..543 CN..643

ICSN533 ICSN633

KL58 KL68

1/8 9/64

CK12 CK12

STC4 STC4

5/32 5/32

H36MCLNL6 H40MCLNL6

2.250 2.500

1.406 1.531

1.625 1.625

2.650 3.030

-10.0 -10.0

CN..643 CN..643

ICSN633 ICSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

catalog number right hand H16MCLNR3

1.000

.640

H16MCLNR4 H20MCLNR4

1.000 1.250

.640 .765

H24MCLNR4 H28MCLNR4

1.500 1.750

.890 1.015

H32MCLNR4 H40MCLNR4

2.000 2.500

H24MCLNR5 H32MCLNR5

www.kennametal.com

hex (inch)

clamp

clamp screw

hex (inch)

C123

O.D./I.D. Tooling

H-MCLN -5°

Kenloc™ Boring Heads Kenloc Inserts

With through coolant. See pages B50–B57 for inserts.

O.D./I.D. Tooling

H-MDPN 27.5°

catalog number right hand H20MDPNR4

L1A

L1S

D min

γF°

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.250 1.000 1.367 .258 1.625

1.705

-13.0

DN..432

IDSN443

KL46L

3/32

CK22

STC20

1/8

H24MDPNR4 left hand

1.500 1.125 1.365 .260 1.625

2.000

-10.0

DN..432

IDSN443

KL46L

3/32

CK22

STC20

1/8

H20MDPNL4 H24MDPNL4

1.250 1.000 1.367 .258 1.625 1.500 1.125 1.365 .260 1.625

1.705 2.000

-13.0 -10.0

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK22 CK22

STC20 STC20

1/8 1/8

With through coolant. See pages B50–B57 for inserts.

H-MDUN -3°

C124

D min

γF°

gage insert

1.000

.750

1.625

1.300

-11.0

DN..332

1.500 2.000

1.125 1.325

1.625 1.625

2.000 2.500

-10.0 -8.0

DN..332 DN..332

H20MDUNR4 H24MDUNR4

1.250 1.500

1.000 1.125

1.625 1.625

1.705 2.000

-10.0 -10.0

DN..432 DN..432

H28MDUNR4 H32MDUNR4

1.750 2.000

1.250 1.375

1.625 1.625

2.250 2.500

-10.0 -8.0

H36MDUNR4 H40MDUNR4

2.250 2.500

1.500 1.750

1.625 1.625

2.870 3.250

-8.0 -8.0

left hand H16MDUNL3

1.000

.750

1.625

1.300

-11.0

H24MDUNL3 H32MDUNL3

1.500 2.000

1.125 1.325

1.625 1.625

2.000 2.500

-10.0 -8.0

H20MDUNL4 H24MDUNL4

1.250 1.500

1.000 1.125

1.625 1.625

1.705 2.000

-10.0 -10.0

H28MDUNL4 H32MDUNL4

1.750 2.000

1.250 1.375

1.625 1.625

2.250 2.500

H36MDUNL4 H40MDUNL4

2.250 2.500

1.500 1.750

1.625 1.625

2.870 3.250

catalog number right hand H16MDUNR3 H24MDUNR3 H32MDUNR3

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

—

KL33L

5/64

CK7

STC5

3/32

IDSN322 IDSN322

KL34L KL34L

5/64 5/64

CK7 CK7

STC5 STC5

3/32 3/32

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK22 CK12

STC20 STC4

1/8 5/32

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK12 CK12

STC4 STC4

5/32 5/32

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK12 CK12

STC4 STC4

5/32 5/32

DN..332

—

KL33L

5/64

CK7

STC5

3/32

DN..332 DN..332

IDSN322 IDSN322

KL34L KL34L

5/64 5/64

CK7 CK7

STC5 STC5

3/32 3/32

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK22 CK12

STC20 STC4

1/8 5/32

-10.0 -8.0

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK12 CK12

STC4 STC4

5/32 5/32

-8.0 -8.0

DN..432 DN..432

IDSN443 IDSN443

KL46L KL46L

3/32 3/32

CK12 CK12

STC4 STC4

5/32 5/32

shim

www.kennametal.com

Kenloc™ Boring Heads Kenloc Inserts

With through coolant. See pages B59–B65 for inserts.

catalog number right hand H24MSKNR4

1.500

.890

L1A

L1S

D min

γF°

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.625 .119 1.744

1.760

-10.0

SN..432

ISSN433

KL46

3/32

CK21

STC20

1/8

H28MSKNR4 H32MSKNR4

1.750 1.015 1.625 .119 1.744 2.000 1.281 1.625 .119 1.744

2.010 2.400

-10.0 -12.0

SN..432 SN..432

ISSN433 ISSN433

KL46 KL46

3/32 3/32

CK21 CK21

STC20 STC20

1/8 1/8

H40MSKNR6 left hand

2.500 1.531 1.625 .179 1.804

3.030

-10.0

SN..643

ISSN633

KL68

9/64

CK12

STC4

5/32

H20MSKNL4 H24MSKNL4

1.250 1.500

1.625 .118 1.743 1.625 .119 1.744

1.470 1.760

-14.0 -10.0

SN..432 SN..432

— ISSN433

KL44 KL46

3/32 3/32

CK21 CK21

STC20 STC20

1/8 1/8

H40MSKNL6

2.500 1.531 1.625 .179 1.804

3.030

-10.0

SN..643

ISSN633

KL68

9/64

CK12

STC4

5/32

.765 .890

With through coolant. See pages B59–B65 for inserts.

H-MSSN 45°

catalog number right hand H24MSSNR4

L1S

D min

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

1.500 1.125 1.625 .338 1.287

2.000

SN..432

ISSN433

KL46

3/32

CK21

STC20

1/8

H32MSSNR6 H40MSSNR6

2.000 1.375 1.625 .507 1.118 2.500 1.750 1.625 .507 1.118

2.500 3.250

SN..633 SN..643

ISSN633 ISSN633

KL68 KL68

9/64 9/64

CK12 CK12

STC4 STC4

5/32 5/32

left hand H40MSSNL6

2.500 1.750 1.625 .507 1.118

3.250

SN..643

ISSN633

KL68

9/64

CK12

STC4

5/32

www.kennametal.com

L1A

hex (inch)

C125

O.D./I.D. Tooling

H-MSKN 15°

Kenloc™ Boring Heads Kenloc Inserts

With through coolant. See pages B66–B74 for inserts.

O.D./I.D. Tooling

H-MTFN 0°

catalog number right hand H16MTFNR3

D min

γF°

gage insert

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.000

.640

1.625

1.200

-12.0

TN..332

H20MTFNR3 H24MTFNR3

1.250 1.500

.765 .890

1.625 1.625

1.470 1.760

-12.0 -10.0

TN..332 TN..332

—

KL33L

5/64

CK7

STC9

3/32

— ITSN323

KL33L KL34L

5/64 5/64

CK7 CK7

STC9 STC9

3/32 3/32

H28MTFNR3 H32MTFNR4

1.750 2.000

1.015 1.281

1.625 1.625

2.010 2.400

-10.0 -8.0

TN..332 TN..432

ITSN323 ITSN433

KL34L KL46

5/64 3/32

CK7 CK9

STC9 STC4

3/32 5/32

H40MTFNR4 left hand

2.500

1.531

1.625

3.030

-6.0

TN..432

ITSN433

KL46

3/32

CK9

STC4

5/32

H16MTFNL3 H24MTFNL3

1.000 1.500

.640 .890

1.625 1.625

1.200 1.760

-12.0 -10.0

TN..332 TN..332

— ITSN323

KL33L KL34L

5/64 5/64

CK7 CK7

STC9 STC9

3/32 3/32

H28MTFNL3 H32MTFNL4

1.750 2.000

1.015 1.281

1.625 1.625

2.010 2.400

-10.0 -8.0

TN..332 TN..432

ITSN323 ITSN433

KL34L KL46

5/64 3/32

CK7 CK9

STC9 STC4

3/32 5/32

H40MTFNL4

2.500

1.531

1.625

3.030

-6.0

TN..432

ITSN433

KL46

3/32

CK9

STC4

5/32

shim

With through coolant. See pages B74–B78 for inserts.

H-MVUN -3°

catalog number right hand H20MVUNR3

D min

γF°

gage insert

shim

lock pin

hex (inch)

clamp

clamp screw

hex (inch)

1.250

1.000

1.625

1.705

-12.0

VN..332

IVSN322

KL34L

5/64

CK22

STC20

1/8

H24MVUNR3 H32MVUNR3

1.500 2.000

1.125 1.325

1.625 1.625

2.000 2.650

-10.0 -10.0

VN..332 VN..332

IVSN322 IVSN322

KL34L KL34L

5/64 5/64

CK22 CK22

STC20 STC20

1/8 1/8

H40MVUNR3 H32MVUNR4

2.500 2.000

1.750 1.375

1.625 1.625

3.250 2.500

-10.0 -10.0

VN..332 VN..432

IVSN322 IVSN433

KL34L KL46

5/64 3/32

CK22 CK43

STC20 STC4

1/8 5/32

H40MVUNR4 left hand

2.500

1.750

1.625

3.250

-10.0

VN..432

IVSN433

KL46

3/32

CK43

STC4

5/32

H20MVUNL3 H24MVUNL3

1.250 1.500

1.000 1.125

1.625 1.625

1.705 2.000

-12.0 -12.0

VN..332 VN..332

IVSN322 IVSN322

KL34L KL34L

5/64 5/64

CK22 CK22

STC20 STC20

1/8 1/8

H32MVUNL3 H40MVUNL3

2.000 2.500

1.325 1.750

1.625 1.625

2.650 3.250

-10.0 -10.0

VN..332 VN..332

IVSN322 IVSN322

KL34L KL34L

5/64 5/64

CK22 CK22

STC20 STC20

1/8 1/8

H32MVUNL4 H40MVUNL4

2.000 2.500

1.375 1.750

1.625 1.625

2.500 3.250

-10.0 -10.0

VN..432 VN..432

IVSN433 IVSN433

KL46 KL46

3/32 3/32

CK43 CK43

STC4 STC4

5/32 5/32

C126

www.kennametal.com

Kenloc™ Boring Heads Kenloc Inserts

With through coolant. See pages B79–B83 for inserts.

catalog number right hand H16MWLNR3

D min

γF°

gage insert

shim

lock pin

hex (inch)

1.000

.640

1.625

1.200

-12.0

H20MWLNR4 H24MWLNR4

1.250 1.500

.765 .890

1.625 1.625

1.470 1.760

-14.0 -14.0

H28MWLNR4 H32MWLNR4

1.750 2.000

1.015 1.281

1.625 1.625

2.010 2.400

-14.0 -14.0

clamp screw

hex (inch)

WN..332

—

KL33L

5/64

WN..432 WN..432

IWSN433 IWSN433

KL46 KL46

3/32 3/32

CK6

STC5

3/32

CK20 CK20

STC20 STC20

1/8 1/8

WN..432 WN..432

IWSN433 IWSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

clamp

left hand H16MWLNL3

1.000

.640

1.625

1.200

-12.0

WN..332

—

KL33L

5/64

CK6

STC5

3/32

H20MWLNL4 H24MWLNL4

1.250 1.500

.765 .890

1.625 1.625

1.470 1.760

-14.0 -14.0

WN..432 WN..432

IWSN433 IWSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

H28MWLNL4 H32MWLNL4

1.750 2.000

1.015 1.281

1.625 1.625

2.010 2.400

-14.0 -14.0

WN..432 WN..432

IWSN433 IWSN433

KL46 KL46

3/32 3/32

CK20 CK20

STC20 STC20

1/8 1/8

Carbide Recycling Help preserve and protect our planet! It’s easy for your company to be environmentally conscious with the Kennametal Carbide Recycling Program. By sending us your used carbide tools, you help preserve and protect the environment and ensure that these products are recycled responsibly. Kennametal accepts any coated or non-coated carbide items, including inserts, drills, reamers, and taps.

By using the Kennametal Carbide Recycling Program, you will receive: • A partner who cares about a sustainable environment. • Easy-to-use web portal to value your used carbide. • Access to our popular Green Box™ options for carbide collection. • Systematic and efficient disposal of carbide materials. • Improved profitability.

Program is not currently available in all geographical areas. For more information, please visit www.kennametal.com/carbiderecycling.

O.D./I.D. Tooling

H-MWLN -5°