Automation INSIGHT! October 2018

Page 1

October 2018 Vol.6 Issue 6

INTERVIEW WITH Ali Al-Qarah Manager, QA Analyzer Saudi European Petrochemical

DMS ANALYTICS Road to Economic Reforms in Saudi Arabia

1st ISA Analysis Division Saudi Arabia Symposium 2018 Catalogue

Company (Ibn-Zahr)

FEATURED PROJECT Saudi Aramco - Marjan - Oil Field Expansion (Overview)

POST SHOW REPORTS 3rd ISA UAE Section Event 2018 KFUPM/ISA-SAS Symposium on Industrial Systems & Control (SISC) 2018


Automation

| October 2018


FIRST WORD

October 2018 Vol.6 Issue 6

INTERVIEW WITH Ali Al-Qarah Manager, QA Analyzer Saudi European Petrochemical

DMS ANALYTICS Road to Economic Reforms in Saudi Arabia

1st ISA Analysis Division Saudi Arabia Symposium 2018 Catalogue

Company (Ibn-Zahr)

FEATURED PROJECT Saudi Aramco - Marjan - Oil Field Expansion (Overview)

POST SHOW REPORTS 3rd ISA UAE Section Event 2018 KFUPM/ISA-SAS Symposium on Industrial Systems & Control (SISC) 2018

Automation INSIGHT! October 2018 Volume 6. Issue 6 PUBLISHED BY Data Media Systems (for private distribution) President & CEO Mohammed Loch mloch@dmsglobal.net Operations Director Sara Loch sloch@dmsglobal.net Content Writer & Editor Rima Ravi rravindran@dmsglobal.net Editorial Designer Darren Deniese ddeniese@dmsglobal.net Although all efforts to ensure accurate reporting are taken, some errors may occur. The views and opinions herein are not those of the Publishers. All Rights reserved.

Content Pages 3 4-5 6 7-29

First Word DMS Analytics INSIGHT! Feature 1st ISA Analysis Division Saudi Arabia Symposium 2018 30-50 Post Show Report 53-56 Process Analyzers 57-62 Featured Project

Advertisers Index Pages 2 4 5 51 52 63 64

DMS Analytics CHROMATOTEC SERVOMEX DMS Projects AIMS AKH Sinan DMS Global

Dear DMS Members, There was a time when intelligent automation was the digitization of process variables to allow a DCS to make adjustments to the process according to the set-point. The previous generation of control systems relied only on feed-back to allow the controller to react to the actual process state. Digitization allowed advanced process and predictive control using more powerful processers and hence intelligent automation. In this world, automation vendors concerned themselves with proprietary protocols, reliability, redundancy and specialisation. Separation and segregation was required to provide specific expertise, disparate systems, reliability and security. Today, intelligent automation means so much more in terms of computing power and electronics’ reliability. Digitalization (not digitization as before) of our automation allows the end-user to, not only predict changes in the process due to external forces that will need adjustment according to the set-point, but also equipment condition to predict upsets that are caused by equipment assets starting to fail like a valve sticking or sensor variance due to internal faults. In this world we will perhaps not need redundancy anymore because this was only required due to the unpredictability of equipment failure. True intelligence will allow condition monitoring to deploy large centralised processors to predict actual time of failure (day, hour and minute) for switch-over to hot-spares (N + 1) which would be loaded with the appropriate configuration moments before failure. This is the nirvana of intelligent automation and something that all manufacturers are working towards in some way. However, it will require a leap-of-faith by the end-users who will need to be convinced that this intelligence will indeed predict an asset’s end-of-life as accurately as promised without unduly affecting the process. It will also require far more use of larger processors that, in order to use big data analytics, will have to be located in the Cloud to allow the algorithms (that will have to remain on the owner’s server due to their value) to collate data from across the globe from many end-users using the same equipment because better prediction comes from greater amounts of data. This will require common system networks and communication protocols, which is obviously a huge challenge, but also will require end-users to share their data with the global community. Cyber-security is obviously a major concern therefore and why so much time is spent these days talking about it but the sharing of asset data and process conditions with vendors is perhaps the biggest challenge. No end-user likes to allow others to access their data for fear of losing their competitive advantage or allowing wrong-doers to create havoc. Most end-users will believe that this data is highly sensitive no matter what it shows. The writer has a different opinion because most of this data is just that, data that is meaningless by itself and requires context. Besides it can be stripped of its source whilst still providing useful feedback to allow real benefits to be derived from such. So, once we have broken-down these barriers, intelligent automation of the future will know the process and assets better than the owners do just as Google, Amazon or Facebook know our purchasing, online social behaviour and reading, listening or watching habits better than we do and we give this data away mostly without fear of reprisal and free!

Kind Regards,

Kind Regards,

Mohammed Loch President and CEO DMS Global Director Industry Development - (ISA)

Hugh Wingrove Editor-in-Chief DMS Global

Automation

| October 2018

3


DMS ANALYTICS Road to Economic Reforms in Saudi Arabia

The petrochemical industry is expected to grow an average of 5% over the next 4 years. The kingdom is planning to increase capacity to 34 million tonnes in 2030 from 12 million tonnes in 2016.

The ongoing National Transformation Program will help fulfill Vision 2030 by strengthening the kingdom’s partnership with the private sector. The scheme will prove to be significant in potentially raising about $200 billion. s

Online Gas Analyzer Experts

atotec® celebra om te hr

40 YEARS OF EXPERTISE n-

o

Having 1,784 billion cubic meters of proven natural gas reserves and being in the world’s top 20 countries, Kuwait is still struggling to take the leadership in the Middle East region.

The Jazan Refinery will serve the south-west of the country with a capacity to produce 400,000 barrels per day (bpd) of various products. Aramco, ACWA Power and Air Products recently signed an $8 billion JV to own and operate gasification assets, power block and associated utilities under a 25 year contract.

in

Kuwait Gas Sector Is Picking Up The Pace

Demand of natural gas is rising due to ongoing expansion projects. Aramco is set to boost the production of Haradh by building compression plants and a pipeline connection for the North, South and Satellite compression facilities. Another expansion is also underway on the Hawiyah plant to raise the capacity by 1.3 billion standard cubic feet per day.

li n

on

King Abdullah City for Atomic and Renewable Energy (KACARE) is developing a nuclear programme to help meet the demand of energy consumption in the kingdom. South Korea’s KEPCO and Russia’s Rosatom have been shortlisted to bid for the construction of two nuclear reactors that will generate 2.8 gigawatts (GW). The award will take place by the end of 2018.

Aramco and France’s Total have signed to build a petrochemical complex in Jubail that will be integrated with the Satorp Refinery which plans to produce 1.5 metric tonnes annually of ethylene.

C

Saudi Arabia remains committed to implementing reforms that will help transform the economy away from its reliance on oil through the Vision 2030 initiative. To create a sustainable, low-cost and productive renewable energy, Saudi Arabia has signed a memorandum of understanding with Japan’s Softbank to develop a solar farm that could generate 200 GW by 2030. Also, four consortia have submitted bids for the Dumat Al Jandal 400MW wind project to which the winning bid will be announced on December 2018.

e i n str u m e n

ta

Sulfur Compounds, VOCs and Odorants monitoring in Safe and Hazardous areas Phenol

The country’s authority, Kuwait Petroleum Corporation (KPC), has been executing policy to increase the amount of natural gas produced by the country to four 4 billion cubic feet per day by 2030. However, the gas production grows along with the gas consumption; majority of the resources are used for both electricity and water desalination. At the moment Kuwait’s gas demand outweighs domestic gas production. In order to fulfill the 2030 strategy plan, Kuwait National Petroleum Company (KNPC) initiated a project to build a new, fifth, gas train at Mina Al Ahmadi refinery. At that time, the fourth gas train has already been under construction. The new facility would comprise several components: feed gas compressor, feed gas dehydration, LPG dehydration, NGL recovery, flare system, nitrogen generation & distribution system; and air

VOCs

BTEX Styrene Wall mounted MEDOR analyzer GC866 ATEX Zone 1 Group IIC T4 or CSA Class 1 Div. 2 Group B, C & D

Odorants

Ambient air and process monitoring in industrial and urban areas auto GCs for online monitoring of VOCs/BTEX in air, water or soil Unique solution for monitoring in hazardous areas Wall mounted Exp or Exd cabinet Continuous measurement at low concentration levels ppt / ppb / ppm / % Compliant with EN 14662-3 No interferences with BENZENE

4

Automation

| October 2018

www.chromatotec.com - info@chromatotec.com


DMS ANALYTICS compression system. Back in 2011, Amec Foster Wheeler has been appointed to carry out front-end engineering and design (FEED) and project management consultancy (PMC) services for the project. The tender was expected to be released shortly after, but the process has been pushed back and the companies were invited to submit bids only in 2014.

Tecnicas Reunidas submitted the lowest bid and was awarded the main contract in Q2 2015. Construction works have started in Q1 2016 and been ongoing in a steady pace. As of now, the project is 85% complete and the commissioning process is expected to start in Q2 2019. The new train will increase Kuwait’s gas production capacity to 805 million cubic feet a day and 106,000 barrels a day (bpd) of liquids, which in turn will significantly boost upstream production capacity.

Expanding Downstream The UAE is targeting to become a leader in the downstream sector through its decision to focus efforts and tremendous investment in this sector. Traditionally the GCC has been known for the success of their upstream projects. The UAE, through the activities operated by the Abu Dhabi National Oil Company (ADNOC) is the 12th largest producer in the world, holding around 6% of the global crude oil reserves. Despite the tremendous success of the upstream sector and in turn the country’s rapidly growing economy, the UAE recognises the importance of using the resources to expand further. Effectively, ADNOC is now ready to significantly expand its portfolio and maximise the business value through focusing of the investment in the downstream sector, without neglecting the currently well-established upstream sector.

OPTIMIZE YOUR

SAFETY FUEL-RICH FURNACE ENVIRONMENTS PUT LIVES AND EQUIPMENT AT RISK. THE SERVOTOUGH Laser 3 Plus Combustion TDL GAS ANALYZER DELIVERS THE KEY MEASUREMENTS THAT PROTECT YOUR PEOPLE.

OPTIMIZED FOR

CO+CH4

Earlier this year, ADNOC announced a $45 billion investment over the next 5 years in downstream projects. Ruwais Industrial Complex is one of the project financed through the investment which involves the development of the world’s largest integrated refining and chemical site which will be located at Abu Dhabi’s western region. This mega project will triple 14.4 million tons of annual production by 2025. The new refinery that will be located within the complex is underway, expecting technical bids for the FEED contract to be submitted soon. Engaging in processes further down the petroleum supply chain, also involves the development of petrochemical plants. Technical bids have been submitted for the EPC for the Gasoline and Aromatics project and ADNOC expects the award to happen at the end of 2018 or beginning of 2019 depending on the procedure of the commercial process. Furthermore, Borouge recently awarded the EPC contract to Marie Tecnimont for the Polypropylene Plant 5 (BPP5) and ADNOC & Cepsa’s Linear Alkyl Benzene (Lab) Facility received bids for the front end engineering design (FEED) and is expecting to award in the last quarter of 2019.

Fast-response cross-furnace measurement of CO and CH4 Measures across the full temperature range from start-up to operation Rapid detection of burner flame-out Easily incorporated into control loops and safety shutdown systems

servomex.com/l3pluscombustion

Automation

| October 2018

5


INSIGHT! FEATURE

Interview with Ali Al-Qarah

Ali Al-Qarah

Manager, QA Analyzer Saudi European Petrochemical Company (Ibn-Zahr)

Q) How long have you been working in the Analysis Industry & why have you chosen to be in this field for your career?

Q) What are the benefits the ISA Analysis Division bring to the industry & how have you been involved?

I have more than 22 years in the analyses industry. Online analyses is very important to control and monitor process performance. This field is very interesting because it depends on how much analytical thinking that you have.

The benefits of ISA Analysis Division brings the latest technology in market, share the best practices, interchange the experiences in world wide. I have been ISA member since 2014

Q) What are the activities of SABIC Ibn Zahr & how do they utilize process analyzers.

Q) What would like to see covered in the ISA Analysis Division Saudi Arabia Symposium in the future?

On line analyses in petrochemical industries are the eyes which can see and monitor your process performance. In accordance, analyses equipment need to be available 100%.

To extend the time for the event to help maximum number get the benefit of the ISA and bring other ISA members from around the world to share the knowledge Q) What other parts of the world would you like to see ISA Analysis Division Symposiums? USA

6

Automation

| October 2018


1st ISA Analysis Division Saudi Arabia Symposium 2018

Co-Host

1st ISA Analysis Division Saudi Arabia Symposium 2018 3rd October 2018

www.isa-ad-saudi.org

King Abdullah Cultural Center Jubail - Saudi Arabia

#ISAKSA EXPERIENCE THE FUTURE. Organised By:

Diamond Sponsors

Gold Sponsors

Silver Sponsors

Bronze Sponsors

Official Logistics Partner

Supported By

lC ya Ro

an bu

DMS Global Local Partner

om Y d mi ssio l an n for Jubai

Automation

| October 2018

7


1st ISA Analysis Division Saudi Arabia Symposium 2018 Co-Host Co-Host

1st ISA ISA Analysis Analysis Division Division 1st Saudi Arabia Arabia Symposium Symposium 2018 2018 Saudi www.isa-ad-saudi.org 3rd October 2018

3rd October 2018 www.isa-ad-saudi.org

King Abdullah Cultural Center King Abdullah #ISAKSA #ISAKSACultural Center Jubail - Saudi Arabia Jubail - Saudi Arabia EXPERIENCE THE FUTURE.

EXPERIENCE THE FUTURE.

Organised By: Organised By:

Wednesday 3rd October 2018 7:00 am – 8:00 am Registration 8:00 am – 8:45 am Keynote Speeches

Mohammed Loch President & CEO DMS Global Director Industry Development ISA

Dr. Soloman Almadi ISA SAS President Sr. Engineering Consultant Saudi Aramco

Mohammed Al-Ghamdi Director, Technical Support SABIC Petrokemya (Arabian Petrochemical Co.)

Ali Al-Qarah Manager, QA Analyzer Saudi European Petrochemical Company (Ibn-Zahr)

8:45 am – 9:15 am Exhibition Ribbon Cutting & Exhibition 9:15 am – 10:30 am Environment Management & Control Track Chair

Speakers

Steve Gibbons Head of Factory Sales & Product Management ABB Automation GmbH

Abhijit Chavan Project Manager DURAG GmbH

Presentation: Presentation: How to Make Continuous Predictive Emission Monitoring Emission Monitoring Systems for Air Emission Monitoring Systems (CEMS) More Affordable in Middle East: Features, Benefits and Challenges for ME End Users

Prabhakar Rao Business Development Manager Emerson Automation Solutions

Ganesan Kathirvel Petrochemical Industry Manager Endress+Hauser

Presentation: H2S Gas Detection System-Wireless Technology

Presentation: Cloud Based Packaged Solutions for Environmental Monitoring

10:30 am – 11:00 am Coffee Break & Exhibition Networking 11:00 am – 12:45 pm Innovation in Analytical Techniques Track Chair

Ali Ibrahim Yaraneri Process Analyzer Consultant SABIC Asset Technology Center

Speakers

Allan Rilling Industry Manager for Refinery and Petrochemicals ABB inc.

Ricardo Mendes Global Factory Sales Manager ABB

Jason Sewell Managing Director BARTEC ORB

Presentation: Optical Spectroscopy Applied to Real-time Optimization of Steam-Cracking Furnace Operation

Presentation: Analysis of Nitric Oxide (NO) in Simulated Cold Box Gases using a Dielectric Barrier Discharge Ionization Detector in Argon Mode

Presentation: Increasing Efficiency & Reliability of Difficult Field Measurements: The Single Solvent Approach to Salt in Crude Oil Measurement

Jean-Philippe Amiet Export Project Manager CHROMATOTEC

Nishant Thankappan Business Development Manager Emerson Automation Solutions

Khalid Nadeem On Stream Analyzer Supervisor SATORP

Presentation: Continuous Monitoring Of Odorant Compounds In Natural Gas, Vaporized LNG Or LPG By Autonomous Process GC

Presentation: Multiple Component Real Time Impurity & Process Composition Analysis Using Mid IR Process Analytical Tunable Laser Spectroscopy (PATLS)

Presentation: Innovation in Analytical Techniques

12:45 pm – 1:45 pm Lunch & Exhibition Networking

8

Automation

| October 2018 1:45 pm – 3:00 pm Track Chair

Speakers

Best Practices in Analytical Systems


Process Analyzer Consultant SABIC Asset Technology Center

Industry Manager for Refinery and Petrochemicals ABB inc.

Managing Director BARTEC ORB

Global Factory Sales Manager ABB

1st ISA Analysis Division Saudi Arabia Symposium 2018 Presentation: Optical Spectroscopy Applied to Real-time Optimization of Steam-Cracking Furnace Operation

Presentation: Increasing Efficiency & Reliability of Difficult Field Measurements: The Single Solvent Approach to Salt in Crude Oil Measurement

Presentation: Analysis of Nitric Oxide (NO) in Simulated Cold Box Gases using a Dielectric Barrier Discharge Ionization Detector in Argon Mode

Co-Host

1st ISA Analysis Division Saudi Arabia Symposium 2018 3rd October 2018

Jean-Philippe Amiet Export Project Manager www.isa-ad-saudi.org CHROMATOTEC

King Abdullah Cultural Center Presentation: #ISAKSA Continuous Monitoring Of Odorant Jubail - Saudi Arabia Compounds In Natural Gas, Vaporized LNG EXPERIENCE THE FUTURE. Or LPG By Autonomous Process GC

Nishant Thankappan Business Development Manager Emerson Automation Solutions

Khalid Nadeem On Stream Analyzer Supervisor SATORP

Presentation: Multiple Component Real Time Impurity & Process Composition Analysis Using Mid IR Process Analytical Tunable Laser Spectroscopy (PATLS)

Presentation: Innovation in Analytical Techniques

Organised By:

12:45 pm – 1:45 pm Lunch & Exhibition Networking 1:45 pm – 3:00 pm Best Practices in Analytical Systems Track Chair

Speakers (Co-Speakers)

Ali S. Al-Dossary PE CSE, FS Engineer Saudi Aramco

Leela Venkat Senior Project Engineer AIMS

Zaheer Juddy Managing Director AIMS

Chet Hankamer Analyzer Technical Advisor & Supervisor Saudi Aramco

Presentation: Use of the Best Practices for Analytical Systems, a commitment not a choice

Presentation: Determining Maintenance Manpower Requirements for Process Analyzers

(Co-Speakers)

Dawood M.H. Fatani Group Leader, Instrumentation Engineering Saudi Aramco

Haitham Sawat Instrumentation Engineer Saudi Aramco

Presentation: Process Analyzer Solutions at WGP

3:00 pm – 3:30 pm Coffee Break & Exhibition Networking 3:30 pm – 5:00 pm Best Practices in Analytical Systems

Ali S. Al-Dossary PE CSE, FS Engineer Saudi Aramco

Diamond Sponsor

Speakers

Abdullah M. Bensaad Instrument Engineer Saudi Aramco

Gary Pick Analyzer Supervisor Saudi Aramco

Ajay Laghate AIT Technical Sales Consultant Schneider Electric – Applied Instrument Technologies

Dr. Stephen Firth Business Development Manager Servomex Group Ltd

Presentation: Continuous Online Monitoring of Steam and Water Quality

Presentation: BS&W Analyzer Calibration Best Practice

Presentation: Best Practices For Chemometric Models For NIR/FTIR Analyzers

Presentation: Use of Tunable Diode Laser Spectroscopy on Safety Applications

Gold Sponsors

Silver Sponsors

Bronze Sponsors

Supported By

lC ya Ro

an bu

Track Chair

om Y d mi ssio l an n for Jubai

Official Logistics Partner

DMS Global Local Partner

www.isa-ad-saudi.org Automation

| October 2018

9


1st ISA Analysis Division Saudi Arabia Symposium 2018

Event Chairman Ali Al-Qarah

Manager, QA Analyzer, Saudi European Petrochemical Company (Ibn-Zahr)

Ali has more than 22 years of experience in the Petrochemical Process Analyzer field, working in technical and managerial levels of petrochemical plants in IBN ZAHR, SABIC Saudi Arabia. He led his analyzer team to success for many projects, turnarounds, and shutdowns which include design, de-commissioning, commissioning and startup. Ali worked within a multi-cultural work environment throughout these years. Currently, Ali is Analyzer Manager for SABIC IBN ZAHR. His role covers all the corrective and preventive maintenance for analyzer equipment in the complex as well as provide the required support for all analyzer committees in Jubail & Yanbu.Ali holds lead positions in analyzer/instrumentation domains, actively participating & leading teams to create SABIC analyzer manufacturing & engineering standards.

Advisory Committee Abdullah M Al-Humaidan

Manager, Analyzer - Quality Assurance Kemya, A SABIC and ExxonMobil Joint Venture

Ahmed Mostafa Helmy Mostafa Instruments Reliability Engineer

Ma’aden Aluminum Refinery Company

• Ahmed Mostafa Helmy has been working as an Instruments Reliability Engineer at MAADEN

Aluminum Refinery Company since 2014 with full responsibility to provide technical assistance and trouble-shooting support for all plant’s Instruments, ensuring all maintenance activities and procedures are aligned with reliability requirements. • He coordinates with other maintenance divisions and operation departments to discuss, develop, review and manage Instrument equipment maintenance and reliability strategies. • He provides technical advice with regards to Instruments selection for any new projects and quotations, as well as review equipment specifications, documents and drawings. • Ahmed also has 5 years’ experience as an Instruments Maintenance Engineer at a petrochemical plant in Egypt.

Abdulla Mohwes

Instrument & Analyser Manager SABIC

Abdullah Almohwes is currently, Electrical & Instrumentation Manager who works for GAS-SABIC affiliate covering the scope of Assets Engineering on Electrical, Instrument, Control System,Analayzer &, Cyber Security. Abdullah, works for ARRAZI- SABIC Affiliate as Electrical Engineer served on Maintenance, Inspection &Assets Engineering Departments during 2013 – 2018, prior that, Abdullah has landed/worked for, Saudi Aramco on Project Management Business line as Project Engineer. I believe Obstacles are things a person sees when he takes his eyes off his goal. Abdullah is a certified on lean Management Six Sigma Green & Black Belt, diploma of Project Management Abdullah holds a bachelor degree with honors in electrical power engineering from Edith Cowan University, Australia.

10

Automation

| October 2018


1st ISA Analysis Division Saudi Arabia Symposium 2018 Muneef J. Al Anazi

Analyzer Supervisor SABIC Gas (National Industrial Gases Company) Experience in online analyzers: 17 Years

Tariq S. Al Barjas

Manager Analyzer Maintenance – Quality Assurance SABIC Petrokemya (Arabian Petrochemical Co.)

Engr. Tariq S. Al-Barjas is the Manager Analyzer Maintenance – Quality Assurance Department of SABIC affiliate Arabian Petrochemical Company (PETROKEMYA). He graduated from Jubail Industrial College with Bachelor’s Degree in Electrical Engineering Technology. He then went on to pursue his Masters in Business Administration (MBA) Leadership and Change Management DePaul University, Charles H. Kellstadt Graduate School of Business, USA. His career with SABIC spans a total of Eight (08) years starting as part of the Analyzer Engineering Staff of SABIC affiliate PETROKEMYA in January 2010. He then went on to manage and lead PETROKEMYA’s Maintenance/Technical Analyzer section for all Hydrocarbons & Polymers plants as Manager in August 2015, which is his current role today. Engr. Tariq is an effective member of Instrument and Control Chapter – Saudi Council of Engineers Jubail Branch. He is also Toastmasters Area 62 Director, District 79

Wajdi A. Al-Hilal

Manager on-line Analyzer Maintenance – Quality Assurance SABIC SAFCO ( Saudi Arabian Fertilizer Company) Engr. Wajdi Al-Hilal is the Manager Analyzer Maintenance – Quality Assurance Department of SABIC affiliate Saudi Arabian Fertilizer Company (SAFCO). He graduated from King Fahd University of Petroleum and Minerals-KFUPM with Bachelor’s Degree in System Engineering-Automation and control. His career with SABIC spans a total of Eleven (11) years starting as Instrument Engineer of Maintenance department of SABIC affiliate SAFCO in December 2006. He then transferred to reliability department as Reliability Instrumented System –RIS leader. Then he went on to manage and lead SAFCO Analyzer section for all Ammonia and Urea plants as Manager in September 2015, which is his current role today.

Khalid Nadeem

On Stream Analyzer Supervisor SATORP Khalid Nadeem is an Electronic Engineer with 20 years of diversified experience in installation, commissioning, training, repairs and laboratory projects for laboratory and online equipment. He has extensive hands-on experience with Aramco and SABIC facilities, educational institutions, government laboratories, gas companies, and other petrochemical facilities. Khalid leads RCAs (rootcause analysis) for various critical incidents and works within a multicultural environment, training newcomers to become fully independent, knowledgeable key members who take full sense of ownership of their roles. At present, Khalid leads a team of highly skilled and qualified engineers & technicians for 560 Online Analyzers in SATORP with a 95% validated and calibrated availability.

Mushabeb Thair Al-Amri

Analyzer Supervisor / Internal Auditor, SIPCHEM Mushabeb Thair Al-Amri is currently an Analyzer Supervisor in SIPCHEM with full responsibility for daily planning of job activities, manpower leadership, and system improvement; as well as ensuring all required documentations as per RCA requirements are updated. He was instrumental in the technical review of the International Polymer Company’s (IPC) project in October 2014.

Automation

| October 2018 11


1st ISA Analysis Division Saudi Arabia Symposium 2018

ISA – Saudi Arabia Section Dr. Soloman Almadi ISA SAS President

Sr. Engineering Consultant Saudi Aramco Soloman Almadi is currently a professional Engineering Consultant in communication, process control systems infrastructure, system integration, and Intelligent Field in Saudi Aramco, Saudi Arabia. He has over 25 years of experience at different capacities in the engineering, planning, and deployment of automation, integration, network and system solutions. Soloman Almadi holds a PhD in simulation and computing from Brunel University, UK and M.S. degree in Electrical Engineering from Southern Methodist University, USA. and B.S. degree in Electrical Engineering from University of Texas, USA. He is an inventor with several patents, has published several IEEE and SPE technical papers in networking, system automations, substation, computing, simulations, and Intelligent Field, and active member of ISA.

Eng. Ghulam Rasul

ISA SAS Vice President I & C Chief Engineer SWCC

Ghulam Rasul is the Instrument plant maintenance Chief Engineer (section head) at SWCC Plant in Al-Jubail. Ghulam holds a Master’s Degree in Electrical Engineering and has more than 35 years of experience in the field of instrument and control at various fertilizers, utilities, power and desalination plants, spanning the fields of Process Measurement and Control, Project management, Safety systems, and Consultations services

Luay H. Al-Awami

ISA SAS Treasurer P&CSD/PASD/Instrumentation Unit Saudi Aramco Luay Awami is an Engineering Consultant with the Instrumentation Unit of Process & Control Systems Department, Saudi Aramco. Luay holds a B.S. and M.S. degree in Chemical Engineering from King Fahd University of Petroleum and Minerals (KFUPM). Luay has more than 22 years of experience on process instrumentation especially control valves and pressure relief devices, mostly with Saudi Aramco central engineering organization. Luay has been an officer of ISA Saudi Arabia Section for the last 10 years and was the Section President from 1/1/2009 to 31/12/2014.

12

Automation

| October 2018


1st ISA Analysis Division Saudi Arabia Symposium 2018

Keynote Speakers Mohammed Loch

President & CEO - DMS Global Director Industry Development – ISA

Mohammed Loch is the President & CEO of DMS Global. DMS Global’s range of activities include Events, Publishing, Video Production, Web Services, PR & Branding Solutions, ultimately complementing its project intelligence database. With this diverse range of activities, DMS is the only media company that can truly call itself a marketing specialist for the Energy Sector. Other than DMS Global, Mohammed’s other roles include; the Director Industry Development for the International Society of Automation (ISA), the Middle East, Africa & Asia Pacific Partner of the ARC Advisory Group, Regional Director Middle East for the Manufacturing Enterprise Solutions Association (MESA) as well as FieldComm Group, Director of Market Intelligence for the Bilateral US-Arab Chamber of Commerce, and Partner & Executive Director of the Choice to Change Foundation.

Dr. Soloman Almadi

ISA SAS President Sr. Engineering Consultant Saudi Aramco Soloman Almadi is currently a professional Engineering Consultant in communication, process control systems infrastructure, system integration, and Intelligent Field in Saudi Aramco, Saudi Arabia. He has over 25 years of experience at different capacities in the engineering, planning, and deployment of automation, integration, network and system solutions. Soloman Almadi holds a PhD in simulation and computing from Brunel University, UK and M.S. degree in Electrical Engineering from Southern Methodist University, USA. and B.S. degree in Electrical Engineering from University of Texas, USA. He is an inventor with several patents, has published several IEEE and SPE technical papers in networking, system automations, substation, computing, simulations, and Intelligent Field, and active member of ISA.

Ali Al-Qarah

Manager, QA Analyzer Saudi European Petrochemical Company (Ibn-Zahr)

Ali has more than 22 years of experience on petrochemical process analyzer field, which worked in technical and managerial levels of petrochemical plants in IBN ZAHR, SABIC Saudi Arabia. He has leaded his analyzer team for many projects, turnarounds and shutdowns including the design, de-commissioning, commissioning and startup to the success. Worked with multi-cultural work environment during the previous years. Currently working on SABIC, IBN ZAHR as Analyzer manager covering all the corrective and preventive maintenance for analyzer equipment in the complex. Provide the required support to all analyzer committees in Jubail & Yanbu. He has hold lead positions on analyzer/instrumentation domains and actively participated & lead teams to create SABIC analyzer manufacturing & engineering standards.

Mohammed Al-Ghamdi Director, Technical Support SABIC Petrokemya (Arabian Petrochemical Co.)

Automation

| October 2018 13


1st ISA Analysis Division Saudi Arabia Symposium 2018

Environment Management & Control 9:15 am -10:30 am Track Chair

Speakers Steve Gibbons

Head of Factory Sales & Product Management ABB Automation GmbH

Presentation: How to Make Continuous Emission Monitoring Systems (CEMS) More Affordable With wide ranging experiences spanning 17 years at ABB and extended periods living and working on three different continents, Steve Gibbons has a uniquely broad view of the world and of continuous emission monitoring systems. Steve has extensive knowledge of EU, US EPA and Japanese regulations having lived and worked in the UK, Germany, the US and Japan. In his current role, held since August 2016, Steve is Head of Factory Sales & Product Management for ABB’s center of excellence for continuous gas analyzers in Frankfurt, Germany. Over the years, Steve has presented multiple, peer-reviewed technical papers at major conferences including: • IEEE/IAS-PCA Cement Conference • U.S. Electric Power Research Institute (EPRI) CEMS User Group • U.S. Energy, Utility & Environment Conference • U.S. Stationary Source Sampling and Analysis for Air Pollutants

Abhijit Chavan Project Manager DURAG GmbH

Presentation: Predictive Emission Monitoring for Air Emission Monitoring Systems in Middle East: Features, Benefits and Challenges for ME End Users

Several years of experience in Analyzer System Package applications, engineering & commissioning. Presently working closely with various Oil & Gas end users across middle east region on Air Emission Measurement System requirements. Good familiarity with EPA standards & regulations on Predictive Emission Monitoring System & Continuous Parametric Monitoring System.

14

Automation

| October 2018


1st ISA Analysis Division Saudi Arabia Symposium 2018 Prabhakar Rao

Business Development Manager Emerson Automation Solutions

Presentation: H2S Gas Detection System-Wireless Technology Business Development Manager-MEA, Rosemount Inc. Flame and Gas Detection at Emerson Automation Solutions. Over 35 years of wide experience in Managing Sales & Marketing in the field of Fire & Gas Detection System and Measurement & Control Applications in the Middle East and India. Out of that over 25 years of vast experience in the Middle East (Saudi Arabia, Bahrain, Qatar and UAE) Mainly served in Oil and Gas, LNG, Refining, Petrochemical, Chemical, Fertilizer and Power Industries.

Ganesan Kathirvel

Petrochemical Industry Manager Endress+Hauser

Presentation: Cloud Based Packaged Solutions for Environmental Monitoring Ganesan is a Qualified Engineer in Instrumentation & Control, with over 21 years of experience in the field of process instrumentation,Specifically analyzers. He has gained experience in areas of service, projects,sales and marketing & since 2010 has been Endress+Hauser. Presently he is Marketing Manager for Analyzers & is also responsible for the Chemical Industry. In his previous experience he was involved in sizeable annual maintenance contracts in water production and water distribution companies, refineries and petrochemical companies. He has closely worked with end users in water, power, oil & gas, and petrochemicals industries in India and the Middle east and has good insights in the core workings of the respective businesses. In recent years, he has been involved in promoting and implementing of digitalization and smart water networking concepts in the region.

Innovation in Analytical Techniques 11:00 am - 12:45 pm Track Chair Ali Ibrahim Yaraneri

Process Analyzer Consultant SABIC Asset Technology Center

Ali Ibrahim has a total of 36 years of experience in the Oil & Petrochemical Process Analyzer field, working in technical levels of petrochemical plants in Petkim, Turkey; and Petrokemya, SABIC Saudi Arabia. He has led multi-cultural teams in analyzer projects from design to start-up to commissioning. Ali has been responsible for issuing some standards relating to process analysers and he has presented technical papers representing SABIC in international analyzer organizations as well as advisory boards. Ali is currently the Process Analyzer Consultant for SABIC Asset Technology Center. He provides technical support on a global level for SABIC affiliates worldwide.

Automation

| October 2018 15


1st ISA Analysis Division Saudi Arabia Symposium 2018

Speakers Allan Rilling

Industry Manager for Refinery and Petrochemicals ABB inc.

Presentation: Optical Spectroscopy Applied to Real-time Optimization of Steam-Cracking Furnace

Operation

Allan Rilling has honours degree from York University with study focused in upper atmospheric chemistry and dynamics between. He has been engaged with FT-IR spectroscopy in various areas of research, product development, and product management since 1989. Allan has been closely involved with the development and application of FT-NIR analysers for on-line monitoring and optimization of industrial processes, particularly refinery hydrocarbon streams including crude distillation, conversion unit operations and final product blending. He has been involved as project manager, product manager and most recently in marketing and portfolio development. He currently manages the product portfolio for ABB in refinery applications. The portfolio includes technologies involving FT-NIR, solid state hydrogen sensing, and off-axis ICOS laser.

Ricardo Mendes

Global Factory Sales Manager ABB

Presentation: Analysis of Nitric Oxide (NO) in Simulated Cold Box Gases using a Dielectric Barrier Discharge Ionization Detector in Argon Mode

Ricardo Mendes is currently the Global Factory Sales Manager for the ABB Analytical Products Manufacturing Unit located in Lewisburg, WV. The Lewisburg PMU is part of the global Measurement Products & Analytics Business Unit. He has over 17 years of experience in the process instrumentation and analytical business in the areas of application engineering, service and sales, including 10 years of experience working for ABB. Ricardo has a Bachelor degree in Electrical Engineering from FACENS Engineering School, Brazil and a Master of Business Administration degree from Getulio Vargas Foundation, Brazil.

Jason Sewell

Managing Director BARTEC ORB

Presentation: Increasing Efficiency & Reliability of Difficult Field Measurements: The Single Solvent Approach to Salt in Crude Oil Measurement - Bachelor of Science in Mechanical Engineering, University of Illinois at Chicago - 19 years of experience in process analyzers and systems for refinery and pipeline applications - Held every position regarding analyser production & installation during career including research and development, application engineering, field service, and quality control

16

Automation

| October 2018


1st ISA Analysis Division Saudi Arabia Symposium 2018 Jean-Philippe Amiet Export Project Manager CHROMATOTEC

Presentation: Continuous Monitoring Of Odorant Compounds In Natural Gas, Vaporized LNG Or LPG By Autonomous Process GC

Master degree of Science from ENSCBP Bordeaux Polytechnic Institute in Chemistry by apprenticeship with a 3 years project on development and integration of online GCMS for VOC monitoring in ambient air at ultra-trace level with CHROMATOTEC from September 2010 to September 2013: 3 years From 2013 until today export project manager in CHROMATOTEC in charge of CHROMATOTEC Beijing office technical and commercial supervision. Area manager for Asia and middle east. Involve in the development of VOC analyzer system airmOzone and GCMS system airmoSCANXpert. 2015 project manager for ATEX and CSA certification of MEDOR instruments using pressurised cabinet 2017 2018 project manager for ATEX and IECex type certification of pressurised and flameproof process GC. 2018 project manager for integration of online trace analyser for BTEX and VOCs in hazardous area using pressurised cabinet.

Nishant Thankappan

Business Development Manager Emerson Automation Solutions

Presentation: Multiple Component Real Time Impurity & Process Composition Analysis Using Mid IR Process Analytical Tunable Laser Spectroscopy (PATLS)

Nishant Thankappan is a Business Development Manager responsible for driving the sales of Emerson’s new line of Hybrid laser analyzers based on Quantum Cascade and Tunable Diode Laser technology across the Middle East and Africa. He holds a Bachelor’s degree in Electronics and Instrumentation Engineering from Bharathiar University, India. He has 16 years of experience in applications involving Online Gas Analyzer Systems used in the process industry. He is well versed with the various technologies used to optimize process control and increase throughput while minimizing downtime.

Khalid Nadeem

On Stream Analyzer Supervisor SATORP

Presentation: Innovation in Analytical Techniques Khalid Nadeem is an Electronic Engineer with 20 years of diversified experience in installation, commissioning, training, repairs and laboratory projects for laboratory and online equipment. He has extensive hands-on experience with Aramco and SABIC facilities, educational institutions, government laboratories, gas companies, and other petrochemical facilities. Khalid leads RCAs (rootcause analysis) for various critical incidents and works within a multicultural environment, training newcomers to become fully independent, knowledgeable key members who take full sense of ownership of their roles. At present, Khalid leads a team of highly skilled and qualified engineers & technicians for 560 Online Analyzers in SATORP with a 95% validated and calibrated availability.

Automation

| October 2018 17


1st ISA Analysis Division Saudi Arabia Symposium 2018

Best Practices in Analytical Systems 1:45 pm- 3:00 pm Track Chair Ali S. Al-Dossary

PE CSE, FS Engineer Saudi Aramco

Ali has worked as an Aramco employee for 20 years. He holds a BS in electrical engineering from King Fahad University of Petroleum and Minerals (Saudi Arabia) in 1995 and an MS in electrical engineering from Georgia Institute of Technology (US, GA) 2002. His specialty is online process analyzers.

Speakers Leela Venkat (Co- Speakers)

Senior Project Engineer AIMS

Presentation: Use of the Best Practices for Analytical Systems, a Commitment not a choice Leela Venkat with twelve year experience in Analyzer field has played Key role in improvement of Precisive TFS analyzer and has developed HMI for the analyzer. Leela is the first Engineer who has successfully commissioned number of Precisive TFS analyzers in the region including ADGAS and SASREF. Leela is has worked on MKS factory floor and fully involved in development of recopies for special applications, It is always interesting to listen to him on future of TFS as an Optical Gas Chromatograph.

Zaheer Juddy (Co- Speakers)

Managing Director AIMS

Presentation: Use of the Best Practices for Analytical Systems, a Commitment not a choice Zaheer Juddy, MD of Analytical Instrumentation & Maintenance system (AIMS) and one of the brightest young entrepreneur in the region and brings with him a vast experience of over 18 years in Analytical field. Being an Analyzer Expert provides consultancy and trainings to End users/Customers from oil and gas industry.

18

Automation

| October 2018


1st ISA Analysis Division Saudi Arabia Symposium 2018 Chet Hankamer

Analyzer Technical Advisor & Supervisor Saudi Aramco

Presentation: Determining Maintenance Manpower Requirements for Process Analyzers • Developed and designed new cems sample system with ametek; to be standardized at all saudi aramco sulfur recovery unit facilities. • Saudi aramco analyzer job ladder; developed corporate analyzer job ladder. • Process analyzer study for saudi aramco facilities; “the study identified berri gas plant as the only plant within saudi aramco which meets all key fundamental requirements of high performance. Berri gas plant serves as an analyzer best practice performance role model that should be followed by all saudi aramco plants”. • Member saudi aramco analyzer engineering standards committee. • Corporate analyzer dashboard; key member of the corporate dashboard. • Pilot plant for new process analyzer applications; bgp seeks new technology to provide analytical process solutions. • Corporate analyzer technician handbook; consulting services member of analyzer handbook. • Process analyzer counsultant; throughout saudi aramco.

Dawood M.H. Fatani (Co- Speakers)

Group Leader, Instrumentation Engineering Saudi Aramco

Presentation: Process Analyzer Solutions at WGP Dawood holds a bachelor degree in Electrical Engineering from King Abdul Aziz University in Jeddah, Saudi Arabia. He joined Saudi Aramco, and worked in the fields of process control systems and instrumentations. Also, he completed number of instrumentation and metering system projects. He was appointed as SME for the hydrocarbon flow measurements. Currently, he is working at Wasit Gas Plant.

Haitham Sawat (Co- Speakers)

Instrumentation Engineer Saudi Aramco

Presentation: Process Analyzer Solutions at WGP Haitham Alsawat working with Saudi Aramco as an instrumentation and system engineer with 5 years’ experience. Worked as Instrumentation/System commissioning engineer for Wasit Gas Plant. Also, has worked as Analyzer commissioning engineer and commissioned different type of Analyzers such as GC Analyzer, PH Analyzer and Feed Gas Analyzer.

Automation

| October 2018 19


1st ISA Analysis Division Saudi Arabia Symposium 2018

Best Practices in Analytical Systems 3:30pm - 5:00pm Abdullah M. Bensaad Instrument Engineer Saudi Aramco

Presentation: Continuous Online Monitoring of Steam and Water Quality Abdullah is a Certified Automation Professional (CAP), and instrument/analytical systems engineer at Saudi Aramco. He holds a BS and Ms degrees in electrical Engineering from KFUPM. In 2006, he joined Saudi Aramco and worked in several mega projects from detail design till commissioning, and currently he is working as a lead engineer in Uthmaniyah Gas Plan in charge of instrumentations and analytical systems. Two technical papers we presented by Abdullah in recognized symposiums.

Gary Pick

Analyzer Supervisor Saudi Aaramco Presentation: BS&W Analyzer Calibration Best Practice Gary Pick has over 20 years’ experience in the field of Process Instrumentation & Online Analyzers. Gary has been working as an analyzer maintenance supervisor with Saudi Aramco since 2013. Previously he has held responsible maintenance and engineering roles with major international companies BP Chemicals, ABB, General Electric and Tata Steel. Gary is part of the Saudi Aramco Process Analyzer Standards Committee and as an industry professional he has been accepted as a member of the Institution of Engineering and Technology in the United Kingdom.

Ajay Laghate

AIT Technical Sales Consultant Schneider Electric – Applied Instrument Technologies Presentation: Best Practices For Chemometric Models For NIR/FTIR Analyzers Ajay Laghate has been working with process analyzers and systems for the last 20 years. Having successfully implemented more than 10 projects with specialization in Fuels Blending Automation applications. Have worked with refineries and petrochemical companies in the S.E. Asian and Middle East regions. Worked with Honeywell India as Analyzer Project Lead for multiple fuels blending automation projects. Worked with process analyzer manufacturers handling sales, service and consulting roles. Have extensive experience in consulting and training analyzer personnel to get the most out of the installed analyzer systems.

Dr. Stephen Firth

Business Development Manager Servomex Group Ltd Presentation: Use of Tunable Diode Laser Spectroscopy on Safety Applications Dr. Stephen Firth is Global Business Development Manager at Servomex Group Ltd. His focus is the petrochemicals industry where he has wide experience in combustion control and critical safety applications. A graduate in Chemistry from the University of York, England, Dr. Firth gained a PhD in Infrared Spectroscopy at the University of Nottingham. Beginning his career at Philips Analytical, Dr Firth joined Servomex in 1994 and has worked in a number of applications, technical support and marketing roles, mostly in the area of Refining, Petrochemicals.

20

Automation

| October 2018


1st ISA Analysis Division Saudi Arabia Symposium 2018

Floor Plan

Exhibitor Locator ABB ELECTRICAL INDUSTRIES CO. LTD.

C1

GE Sensing EMEA (Baker Hughes, a GE Company)

A3

ABDUL KARIM H ALSINAN & PARTNER FOR TRADING COMPANY

C6

Hadaf Al Aims Trading

B2

Advanced CAE Middle East

B5

INDUSTRIAL SYSTEMS GROUP

B1

AMETEK Process Instruments

B3

Metrohm Middle East

C4

BARTEC ORB

C2

NAIZAK GLOBAL ENGINEERING SYSTEMS

B1

CHROMATOTEC

C5

Royal Commission for Jubail and Yanbu

A1

DURAG GROUP

B4

Royal Commission in Jubail

EMERSON

C3

Schneider Electric

A2

Endress+Hauser

B6

Servomex Group Limited

C7

Automation

| October 2018 21


1st ISA Analysis Division Saudi Arabia Symposium 2018 ABB ELECTRICAL INDUSTRIES CO. LTD. Contact Person: Mustafa Al-Tineh / Vijay Kumar Hamirwasia Address: P.O Box: 2873, Dammam –Khobar Highway , Al-Khobar, Kingdom of Saudi Arabia Telephone Number: 013-8063922/ 013-8063877 Mobile Number: 0503168922 / 0534400161 Website: www.new.abb.com/products/measurement-products/analytical Email: Mustafa.AL-Tineh@sa.abb.com, vijay.k.hamirwasia@bh.abb.com Sponsor Type: Gold Sponsor Stand Number: C1 ABB is a pioneering technology leader that is writing the future of industrial digitalization. For more than four decades, we have been at the forefront, innovating digitally connected and enabled industrial Equipment and systems. Every day, we drive efficiency, safety and productivity in utilities, industry, transport and infrastructure globally. With a heritage spanning more than 130 years, ABB operates in more than 100 countries and employs around 135,000 people. ABB is operations are organized into four global divisions. One of the division is Industrial Automation offering products, systems and services designed to optimize the productivity of industrial processes. Solutions include turnkey engineering, control systems, measurement products like Analytical Instruments, life cycle services, outsourced maintenance and industry specific products.

ABDUL KARIM H ALSINAN & PARTNER FOR TRADING COMPANY Contact Person: Fayez Al Senan Address: Cross Raod 112 & 114, Support Industries 3, Jubail 2, Saudi Arabia Telephone Number: 0096613 350 5200 Mobile Number: 0096650 590 2441 Website: www.sinanakh.com Email: sales@sinanakh.com / fayez@sinanakh.com Sponsor Type: Exhibitor Stand Number: C6 Abdul Karim H Al-Sinan & Partner for Trading (Kytos Arabia) is a leading supplier of Analytical Instruments (Process On-Line Analyzers & Laboratory Analyzers), Environmental Monitoring Equipments, Process Control Instrumentation and Laboratory Equipments since 1985; providing installation, Commissioning Start-up, and Training. Kytos Arabia has been a business Partner with Servomex and Thermo Fisher since 1985.

Advanced CAE Middle East Contact Person: Tess Young Address: Musaffah 15, Plot 25, Unit 37 Telephone Number: 025632382 Mobile Number: 00 97125632382 Website: www.advcae.com Email: tess.young@advcae.com Sponsor Type: Bronze Sponsor Stand Number: B5 Advanced CAE is a global leader in systems integration for online Process Analysers, for the Oil, Gas and Petrochemical industries. Our analyser systems cover the complete installation range, from walk in ventilated, air-conditioned houses, to cabinets, and simple rack mounted analysers for field installations. CAE understands and works with the client, to achieve the best technical application for the purpose, taking into account total life cycle costs, future maintenance and service requirements for the measurement. As a company under the Advanced Holdings banner, we are able to draw upon the knowledge, products and services of our group companies. This includes the highest quality Process Analysers from ATAC, ATOM, Guided Wave and SoFraser, along with our selected agencies for other applications. CAE operates worldwide, with manufacturing facilities in the USA, Europe, China, Singapore, and now in the UAE and Saudi Arabia, in order for us to bring service support and expertise closer to our valued clients. Our talented team in Advanced CAE (Middle East) draws upon over 30 years of experience in the area of systems integration. Helping us in our goal to become the number one systems integrator in the Middle East.

22

Automation

| October 2018


1st ISA Analysis Division Saudi Arabia Symposium 2018 AMETEK Process Instruments Contact Person: Stephane Cappe Address: 150 Freeport Road, Pittsburgh, PA, USA 15238 Telephone Number: 0033130688923 Mobile Number: 0033680230160 Website: www.ametekpi.com / www.sru.ametekpi.com Email: stephane.cappe@ametek.com Sponsor Type: Exhibitor Stand Number: B3 AMETEK Process Instruments provides on line process gas analyzer systems for: • Sulphur recovery and tail gas treating applications (SRU Tail Gas, SO2 CEMS, Pit Gas, TGTU H2-H2S) • New products include a portable, moisture in natural gas analyzer • Moisture analyzers, both TDL (1-2,500 ppm) as well as and Quartz crystal based (10-1,000 ppb) • Thermox combustion O2 analyzers Analytical Instruments and Maintenance Systems (AIMS) supports, sells and promotes AMETEK Process Instruments solutions in KSA, Qatar, Oman, Kuwait and UAE.

BARTEC ORB Contact Person: Jason Sewell Address: 4724 South Christiana Ave. Chicago, IL 60632 USA Telephone Number: 001-773-927-8600 Mobile Number: 001-630-247-2607 Website: www.bartec-orb.com Email: Jason.sewell@bartec-orb.com Sponsor Type: Gold Sponsor Stand Number: C2 BARTEC ORB belongs to the BARTEC Group, and proves specialist expertise in the field of industrial safety technology. This expertise encompasses analysis devices and systems, as well as the engineering, construction and service-related aspects of monitoring and optimizing production processes, operational safety and systems availability. We take pride in our high degree of competence and reliability. Indeed, this forms the basis for our successful partnerships with both constructors and operators of plants in the fields of chemicals, petrochemicals, oil refining, pharmaceuticals, environmental protection and energy, as well as in machine, apparatus and plant construction and the food industry.

CHROMATOTEC Contact Person: Jean-Philippe Amiet Address: 15 rue d’artiguelongue Saint-Antoine 33240 Val de Virvée Telephone Number: (0033) 5 57 94 06 26 Mobile Number: (0033) 6 63 73 94 18 Website: www.chromatotec.com Email: info@chromatotec.com Sponsor Type: Exhibitor Stand Number: C5

R

group

Chromatotec® has been specialized in the development, manufacturing and sales of online gas analyzers by chromatography, exclusively made in France. With offices in China and USA, the group is historically based in Gironde (South-West of France) since its creation. Chromatotec® is worldwide known for its leading-edge technology. Based on gas chromatograph principle, our analyzers are focused on VOCs / Sulphur compounds / Odor monitoring. These technologies allow to track individual compounds at ppt/ppb/ppm concentration levels. Chromatotec® is working with governmental agencies, university institutes, industrial companies on the following fields of monitoring and analysis : ambient air quality , industrial air, pure gases, water, waste water treatment plants and odor, emission and CEMs, process and natural gas.

Automation

| October 2018 23


1st ISA Analysis Division Saudi Arabia Symposium 2018 DURAG GROUP Contact Person: Abbad Cheik Address: Kollaustrasse 105 - 22453 Hamburg, Germany Telephone Number: +49(40)554218-1145 Mobile Number: +49 (170) 7865961 Website: www.durag.com Email: abbad.cheik@durag.com Sponsor Type: Exhibitor Stand Number: B4 DURAG GROUP is a global provider of measuring and control technology in the field of: • Environmental Monitoring: Opacity & Dust Monitors, Wet Stack Dust Monitors, Ambient Monitoring, Volume Flow Meters, Filter Monitors, Mercury Analyzers. • Environmental and Process Data Management: Emission Data Acquisition and Handling Systems (EMS, PEMS), Water Data Management • Tunnel Sensors: Visibility Monitors, Air Flow Monitors • Combustion Technology: Flame Sensors, HEGWEIN Gas Oil Igniters, Gas Oil Pilots, Burner Controls, Electrical Igniters, Flare Pilots SMITSVONK, Flare Igniters, pilot burners, lances and spark plugs, Portable and Mobile Ignition Units • Video Thermography for Combustion Processes in Boilers, Furnaces and Crackers

EMERSON Contact Person: R. Suresh Address: Emerson Fze, Jafza South, Jebel Ali, Dubai, UAE , Po Box 17033 Telephone Number: +971-48118429 Mobile Number: +971-557095832 Website: www.emerson.com Email: ramanujan.suresh@emerson.com Sponsor Type: Silver Sponsor Stand Number: C3 With over 125 years of experience in doing just that, Emerson combines industry knowledge, manufacturing expertise, and technological innovation. Emerson is committed to eliminating the risks involved when you are executing the most complex analytical systems projects. The Rosemount Analytical System integration in Dubai is the largest in the region, allowing you to avail of the most comprehensive range of analytical systems solutions and third-party integration services for liquid and process gas analysis applications in the industry. These include Gas analyzers, Gas chromatographs, Quantum Cascade Laser based analyzers, and Steam & Water Quality monitoring systems for various process and environmental applications in the region. Emerson’s services include designing, engineering, staging, and managing projects involving various process analytical systems ranging from simple to complex. By utilizing global resources and analytical expertise to provide localized support, Emerson ensures that the highest levels of safety and quality are met throughout your operations.

24

Automation

| October 2018


1st ISA Analysis Division Saudi Arabia Symposium 2018 Endress+Hauser Contact Person: Sekar Arumugam Address: Tariq Bin Ziyad Street, 2nd Floor ProCorp Building, Rakah Al Janubiyah, P.O. Box 76202, Eastern Province 34227 Al Khobar, Saudi Arabia Telephone Number: +966 1 384 944 71 Mobile Number: +966138494471 Website: www.mesc.endress.com Email: info@sa.endress.com Sponsor Type: Bronze Sponsor Stand Number: B6 Endress+Hauser is a global leader in measurement instrumentation, services and solutions for industrial process engineering. 47 sales centers, 80 representatives and production centers in 12 countries guarantees competent worldwide support. Endress+Hauser provides sensors, instruments, systems and services for level, flow, pressure and temperature measurement as well as analytics and data acquisition. The company supports customers with automation engineering, logistics, IT services and solutions. Our products set standards in quality and technology. We work closely with the chemical, petrochemical, food & beverage, oil & gas, water & wastewater, power & energy, life science, primaries & metal, renewable energies, pulp & paper and shipbuilding industries. Endress+Hauser supports its customers in optimizing their processes in terms of reliability, safety, economic efficiency and environmental impact across industries. Founded in 1953, the Group has developed from a specialist in level measurement to a provider of complete solutions with constant expansion into new territories and markets.

GE Sensing EMEA (Baker Hughes, a GE Company) Contact Person: Mohammad Khan Address: Dhahran Techno Valley, Dhahran , Kingdom of Saudi Arabia Telephone Number: +966 505 247 045 Website: www.gemeasurement.com Email: mohammd.m.khan@bhge.com Sponsor Type: Exhibitor Stand Number: A3 GE Sensing EMEA is specialized in: 1. Ultrasonic Flow Meters for Process Liquid, Gas, Steam and Flare Measurement 2. Ultrasonic Clamp on and Portable Flow meter for Process Liquid and Gas 3. Ultrasonic Meter for Custody Transfer Application 4. Ultrasonic Flare Flow Measurement 5. Flare-IQ and PEMS ( Flare Optimization ) 4. Ultrasonic Flow Meters For Water & CO2 Injection Applications 5. Moisture Analyzers and Oxygen Analyzer 6.Pressure calibrators Aujan Industrial Supplies s the ‘Channel Partner’ of GE Sensing EMEA for Oil& Gas business segments in KSA. Our team of experienced engineers offers unique value-added solutions to technical needs and problems. With local support, skilled and experience staff, we provides engineered solutions, LSTK offer, Service Contracts and calibrations to the Oil& Gas business segments. We have a team of factory-trained and GE certified service engineer based in Saudi Arabia to support our clients on fast track basis.

Automation

| October 2018 25


1st ISA Analysis Division Saudi Arabia Symposium 2018 Hadaf Al Aims Trading Contact Person: Zaheer Juddy, Jamsheed Akther Address: #2 Sahaab Industrial Complex, Tuqbah Industrial Area, Al-Khobar-31952, PO BOX: 3556 Telephone Number: +97126436114, 966-13-8022564 Mobile Number: +971 5 4811218, 966-509828212 Website: www.aimsgt.com Email: zaheerjuddy@aimsgt.com Sponsor Type: Silver Sponsor Stand Number: B2 Analytical Instrumentation & Maintenance Systems (AIMS) is Middle East’s leading and highly professional comprehensive range of services. AIMS are founded to provide expertise service for Analytical Instrumentation. We optimize your system and ensure maximum efficiency with minimal downtime. The company is led by personnel with specialized experiences in Analytical Instrumentation and Systems Development supported by a team of service personnel in the field of related process automation. These services are widely spread in Analytical Instrumentation (Lab & Online), Air Quality Monitoring, Process Solutions, Sulphur Recovery Optimization and equipment related to Sulphur Recovery Units.

INDUSTRIAL SYSTEMS GROUP Contact Person: Tamer Abdallah Address: PO Box 31377, Al Khobar 31952 Telephone Number: 013 898 9577 Mobile Number: 050 600 2704 Website: www.isg.com.sa Email: tamer@isg.com.sa Sponsor Type: Diamond Sponsor Stand Number: B1 Industrial Systems Group (ISG) was established in 2008. Located at Dammam 2nd Industrial city Saudi Arabia. ISG provides complete manufacturing and integration solutions to the process industries locally. ISG Works facility is approved by Aramco, SABIC and SEC. Have capability in design, engineering, manufacturing and integration of Electrical Switch racks, Lighting fixtures, Junction box, and panel boards, Control stations, fiberglass Tray, Ladders, Vibration Monitoring Systems (VMS) and Metering Skids. ISG Process Analytical System is a division formed a decade ago to provide complete engineering and Analytical Solutions locally, having capabilities in design, engineering, manufacturing and integration of custom built Sample Conditioning System, Analyzers Shelters, 3-sided sun shade racks, cabinets, Control Shelters etc. ISG is armed with a team of experienced professional to provide after sales services i.e. Testing, Commissioning and on-site Training. ISG Analyzers Products cater services in Industrial Applications such as: Petrochemical, Refinery, Chemical, Oil and Gas, Power Generation, Steel, Cement, Emission Monitoring System, Air quality and Pollution Monitoring Analytical System, Water and Effluent Treatment Industries. A dedicated workforce of experienced engineers and technicians ensures and maintains a high quality of work standards.

Metrohm Middle East Contact Person: Viswanath.V / Anson Jaison Address: B2-21, SAIF Zone, PO Box 120747, Sharjah, U.A.E Telephone Number: +971 6 557 5991 Mobile Number: +971505003543 Website: www.metrohm.ae Email: info@metrohm.ae Sponsor Type: Exhibitor Stand Number: C4 Metrohm is a worldwide leading manufacturer of precision instruments for chemical analysis in the laboratory and online Process equipment. In the field of electrochemical ion analysis we have been the unchallenged world number one for many years. Our dedicated teams in Technical Marketing, Application and Service Support ensure that customers maximize the utility of their instruments with enhanced support. With a Regional support facility - Metrohm Middle East based in UAE, we extend valuable and timely support for our customers and distributors in Middle East and North Africa region. Meet us at our booth to know more about what we offer.

26

Automation

| October 2018


1st ISA Analysis Division Saudi Arabia Symposium 2018 NAIZAK GLOBAL ENGINEERING SYSTEMS Contact Person: Tamer Abdallah Address: PO BOX 31377, AL KHOBAR 31952 Telephone Number: 013 898 9577 Mobile Number: 050 600 2704 Website: www.naizak.com Email: tamer@naizak.com Sponsor Type: Diamond Sponsor Stand Number: B1 Naizak Global Engineering Systems (Naizak) established in 1998, is an engineering & IT conglomerate providing specialized services to the Oil & Gas, Petrochemical, Electrical, Power and IT companies. Core Business area: Turnkey Laboratory Solutions, Process Instrumentation & Analyzers, Plant IT Solutions, Integrated Security Services, Renewable Energy, Power, Electrical system and Mechanical. Naizak, formed Process Analytical System Division to cater services in process industry Petrochemical, Refinery, Chemical, Oil and Gas, Power Generation, Steel, Cement and Water, Front End Engineering, (FEED), Design engineering, Turnkey Project solutions, Analyzers System and Shelter building, Custom built Sample Conditioning System and Integration. Technical support after sales for installation, commissioning and Training. Naizak partners with Global Leaders in Analyzer Manufacturing, equipped with a team of professional, experienced engineers and technicians to support Analyzers sales, marketing and services in industrial application measurements in Upstream and Downstream, Hydrocarbon process, Emission Monitoring System, Air quality and Pollution Monitoring, Water and Effluent Treatment industries. Naizak is committed to provide quality services to its customers locally to meet the plant operational and product quality standards and requirements in excellence.

Royal Commission for Jubail and Yanbu Royal Commission in Jubail Contact Person: Mazen Alsirhani Address: Kingdom Of Saudi Arabia – P.O.Box 10001 Jubail Industrial City 31961 Telephone Number: 00 966133413000 Mobile Number: 00 966557334907 Website: www.rcjy.gov.sa Email: suggestion@rcjubail.gov.sa Sponsor Type: Supported By Stand Number: A1 Four decades ago, the economic development in the Kingdom of Saudi Arabia depended basically on crude oil as, almost, a sole income source. But after careful consideration, and with the guidance of Allah, the leadership was convinced of the necessity of conducting comprehensive studies for the versification of the national income sources, investment of oil income in the utilization of other natural resources in the kingdom, creating business opportunities and jobs for citizens and importing and nationalization of the latest scientific and industrial technologies worldwide. These studies concluded the need to make an integrated strategic plan for manufacturing to serve as the backbone of the development plans. Thus, the Royal Commission was born as per Royal Decree No. (M/75) dated 16/9/1395H which directed its establishment and assignment of the construction, operation and development of the infrastructure in Jubail and Yanbu industrial cities to host the petrochemical industries and to achieve the huge and ambitious industrial programs in Jubail, on the Arabian Gulf coast, and Yanbu on the Red Sea coast, as per a master plan for each and to tie this industrial plan with the comprehensive integrated development plan of the country. The Royal Commission for Jubail and Yanbu has managed to attract investments, provide hundreds of thousands of jobs for Saudi citizens and nationalize the latest industrial technologies worldwide. Such efforts gave the Royal Commission a special rank among similar international industrial cities. The growth rate of the achieved investments and the need to host the growing number of investment requests prompted the Saudi Leadership to expand the cities into Jubail (2) and Yanbu (2). And thanks to Allah, under the wise leadership, achievements flowed until Jubail and Yanbu became mega industrial forts pointed at with admiration. After the huge success of the Royal Commission for Jubail and Yanbu in the construction and operation of Jubail and Yanbu industrial cities, the Council of Ministers issued Royal Decision No. (355) dated 30/10/1430H which directed the Royal Commission for Jubail and Yanbu to manage Ras Al Khair Industrial City and to provide services for mining and other industries on the same pattern of Jubail and Yanbu industrial cities. The Royal Commission for Jubail and Yanbu was assigned the management and operation of Jazan Economic City as well as per a Royal Decree considering its continuous and impressive successes. As an acknowledgment of the Royal Commission’s efforts in different fields, it received several international, regional and local awards and certificates.

Automation

| October 2018 27


1st ISA Analysis Division Saudi Arabia Symposium 2018 Schneider Electric Contact Person: Husam Al Ghamdi Address: PO Box 31943, Al Khobar 31952 Kingdom of Saudi Arabia Telephone Number: 00966 138 076 161 Mobile Number: 00966 555 930 160 Website: www.schneider-electric.com Email: husam.alghamdi@schneider-electric.com Sponsor Type: Silver Sponsor Stand Number: A2 Schneider Electric is the global specialist in energy management and automation. Our 160,000+ employees serve customers in over 100 countries, helping them to manage their energy and process in ways that are safe, reliable, efficient and sustainable. From the simplest of switches to complex operational systems, our technology, software and services improve the way our customers manage and automate their operations.

Servomex Group Limited Contact Person: Satish Vaddi Address: Servomex Group Limited Middle East Business Centre Sharjah Airport Free Zone Office: Q3-197, PO Box 8962, Sharjah, UAE Telephone Number: 00 971 6552 8073 Mobile Number: 00 966 50 61 444 65 Website: www.servomex.com Email: svaddi@servomex.com Sponsor Type: Exhibitor Stand Number: C7 The world expert in gas analysis, Servomex is the leading provider of reliable, accurate and stable gas measurement solutions to industries across the globe. For more than 65 years Servomex has created and developed innovative gas analysis technologies. Two state-of-the-art Technical Centers, in Crowborough, UK and Boston, Massachusetts, continue to provide industry-leading R&D and manufacturing capabilities. The company operates a global presence through business, service and systems engineering centers in China, the USA, India and Singapore, with Servomex offices throughout Europe, Asia and the Middle East. Servomex originated Paramagnetic sensing technology for oxygen measurements and has developed an exceptional reputation in the advancement of Zirconia, Laser (TDL), Gas Chromatography, FID, Coulometric, Photometric and Thick Film technologies. Delivering high�performance, cost�effective gas analysis through a comprehensive portfolio of dependable products, Servomex is also committed to excellence in customer service, offering a global network of sales and service support. Servomex is part of Spectris plc, a leading supplier of instrumentation and controls to global markets.

28

Automation

| October 2018


1st ISA Analysis Division Saudi Arabia Symposium 2018

Business Activity Locator Environment Management & Control

Best Practices In Analytical Systems ABB ELECTRICAL INDUSTRIES CO. LTD.

C1

ABDUL KARIM H ALSINAN & PARTNER FOR TRADING COMPANY C6

ABB ELECTRICAL INDUSTRIES CO. LTD.

C1

ABDUL KARIM H ALSINAN & PARTNER FOR TRADING COMPANY C6

Advanced CAE Middle East

B5

AMETEK Process Instruments

B3

AMETEK Process Instruments

B3

CHROMATOTEC

C5

CHROMATOTEC

C5

DURAG GROUP

B4

EMERSON

C3

EMERSON

C3

Endress+Hauser

B6

Hadaf Al Aims Trading

B2

Hadaf Al Aims Trading

B2

INDUSTRIAL SYSTEMS GROUP

B1

INDUSTRIAL SYSTEMS GROUP

B1

Metrohm Middle East

C4

Metrohm Middle East

C4

NAIZAK GLOBAL ENGINEERING SYSTEMS

B1

NAIZAK GLOBAL ENGINEERING SYSTEMS

B1

Servomex Group Limited

C7

Schneider Electric

A2

Servomex Group Limited

C7

Innovation in Analytical Techniques ABB ELECTRICAL INDUSTRIES CO. LTD.

C1

ABDUL KARIM H ALSINAN & PARTNER FOR TRADING COMPANY C6 Advanced CAE Middle East

B5

AMETEK Process Instruments

B3

BARTEC ORB

C2

CHROMATOTEC

C5

EMERSON

C3

Endress+Hauser

B6

GE Sensing EMEA (Baker Hughes, a GE Company)

A3

Hadaf Al Aims Trading

B2

INDUSTRIAL SYSTEMS GROUP

B1

Metrohm Middle East

C4

NAIZAK GLOBAL ENGINEERING SYSTEMS

B1

Schneider Electric

A2

Servomex Group Limited

C7

Automation

| October 2018 29


POST SHOW

REPORT 2018

KFUPM / ISA-SAS Symposium on Industrial Systems & Control (SISC) 2018

27th - 28th March 2018

Automation

| October 2018

Kempinski Al Othman Hotel - Al Khobar, Saudi Arabia


POST SHOW REPORT

KFUPM/ISA-SAS Symposium on Industrial Systems & Control 2018

The KFUPM/ISA-SAS Symposium on Industrial Systems & Control is the first-ofits-kind, large scale automation event wherein Symposium on Industrial Systems & Control (SISC 2018) collaborated with King Fahd University Of Petroleum & Minerals (KFUPM). This event was held at Kempinski Al Othman Hotel - Al Khobar, Saudi Arabia on 27th and 28th of March,2018. The event brought together various vendors, end users, and technical experts on one platform to share knowledge, showcase latest technologies, and strengthen the automation community.

Automation

| October 2018 31


POST SHOW REPORT

OPENING REMARKS The International Society of Automation Saudi Arabia Section (ISA-

Dr. Soloman Almadi ISA-SAS President Technical Committee Co-Chairman Sr. Engineering Consultant Saudi Aramco

SAS), which was established back in 1980, has been a pioneer in promoting the automation technology, standards, and training for both professionals and students. Ambitious plans are being implemented to expand ISA across major cities kingdom-wide as well as promoting this professional engineering society within female engineer’s sectors and academia. Partnerships with KFUPM and major players like DMS Global can be expanded to serve these goals.

SISC 2018 has been another very successful symposium in the tradition

Dr. Hesham Kamal Al-Fares Symposium Co-Chairman Chairman of Systems Engineering KFUPM

of previous SISC events. However, this current event has started a new phase for SISC and has moved it one step up to a higher, more prominent level. Although this is the outcome we expected from our full-scale collaboration with ISA, the results have truly surpassed our expectations. The higher level of collaboration between KFUPM and ISA along with the organizational skills of DMS Global has proved to be a win-win situation for all sides and stakeholders.

The ISA/SISC 2018 was a huge success by all measures. The close

Luay H. Al-Awami Symposium Co-Chairman P&CSD/ PASD/ Instrumentation Unit Saudi Aramco

collaboration between ISA-SAS and KFUPM, and the great efforts and planning by DMS Global have resulted in a high-quality technical program, an automation-focused exhibition and unique networking opportunities. The automation community in the Kingdom is very eager to participate in such focused events.

The event was a phenomenal success with over 1,000 attendees and

Mohammed Loch President & CEO - DMS Global Director Industry Development ISA

32

Automation

| October 2018

more than half of them were End Users & EPCs. The Exhibition Floor was sold out and we had a full house in both conference rooms. I am delighted with the winning combination of KFUPM, ISA SAS and DMS Global to produce SISC.


POST SHOW REPORT

THE EVENT IN NUMBERS ATTENDEES

SPONSORS

EXHIBITORS

SPEAKERS

2018

1,150

18

36

83

2019

1,250

20

40

100

*expected projections

233

609 308

The participating companies represented were mainly End Users and EPC’s.

52.95% 26.78% 20.26%

Total Attendees

1,150

End Users & EPC’s Vendors Educational Institutions Automation

| October 2018 33


POST SHOW REPORT

AWARDS CEREMONY & EVENT PICTURES Following the Keynote speeches, the event sponsors and organizers were awarded. Award given to : Gold Sponsors

Khalid Al Abdulkarim, CEO, Al Abdulkarim Holding Company

Mohammad Khan, Country Manager, GE Sensing (MS)

Mohamed Hashem, Enterprise Sales Manager - Saudi Arabia, Kaspersky Lab

34

Automation

| October 2018


POST SHOW REPORT

Charles Barlow, CEO / President, Robotics Centre

Alfonso Rodriguez, VP Process Automation Middle East Hub, General Management, Schneider Electric

Award given to : Silver Sponsor

Bassam Aldebbeh, Country Manager KSA & Bahrain, Easy World Group

Automation

| October 2018 35


POST SHOW REPORT

Award given to : Bronze Sponsors

Patrick Flanders, VP Business Development, ATV HIPPS

Islam Fahmi, ME Regional Director, Compressor Controls Corporation

Apurva Sharma, Marketing Manager Oil & Gas, Endress+Hauser Ahmad Alkhatib, Hudoud AlTeqnia, Saudi partner for GSN

Omar Al Sheikh, Technology Leader, HPS SA & R&D, Honeywell

36

Automation

| October 2018

Ala Shehadah, Regional Channel Sales and Business Development Manager - IMEA, Pentair


POST SHOW REPORT

Mehul Vaidya, Key Account Management & Global Project Pursuit, Pepper+Fuchs ME FZE

Vigil Matthew, Country Manager Saudi Arabia, VEGA Technique

Larry Perkins, Automation and Control VP Business Development, Wood

Award given to : SISC Platinum Sponsor

Ahmad Al-Abdrabbuh, Senior Executive Vice President & Board Director, Yokogawa

Automation

| October 2018 37


POST SHOW REPORT

SECTION EVENT KFUPM/ISA-SAS Symposium on Industrial Systems & Control was inaugurated with official ribbon cutting ceremony by Dr. Sahel Abdul-Jawad, Vice Rector for Graduate Studies and Research of KFUPM.

36 regional and international companies exhibited at the event.

38

Automation

| October 2018


POST SHOW REPORT

SPEAKERS AND TECHNICAL PROGRAM The 2-day event covered the following main topics:

Process Measurement, Automation and Safety Automation Standards and Regulations & PAS Life Cycle Management Environmental Data Management Power System Automation Process Analyzers, Sensors & Actuators Process Optimization and Advanced Control Process Safety

Data Analytic Tools and Applications UAV & Robotics in Industry Application Integration Industrial Control Systems Cybersecurity Data Analytics IIOT “Industrial Internet Of Things” Networking and Wireless Smart Grid Applications and Optimization

Day One – Tuesday 27th March 2018 7:00 am – 8:00 am Registration 8:00 am – 9:00 am Opening Remarks and Awards

H.E. Dr. Khalid S. Al-Sultan Rector of King Fahd University of Petroleum and Minerals

Ahmed Ali Al Ghamdi Manager of Process & Control Systems Department (P&CSD) Saudi Aramco

Dr. Soloman Almadi ISA-SAS President Technical Committee Co- Chairman Sr. Engineering Consultant Saudi Aramco

Dr. Hesham Kamal Al-Fares Symposium Co-Chairman Chairman of Systems Engineering King Fahd University of Petroleum and Minerals

Luay Awami Symposium Co-Chairman P&CSD/PASD/ Instrumentation Unit Saudi Aramco

Mohammed Loch President & CEO DMS Global Director Industry Development ISA

9:00 am -9:30 am Exhibition Ribbon Cutting 9:30 am -10:10 am Keynote Speech

Automation

| October 2018 39


Luay Awami Symposium Co-Chairman P&CSD/PASD/ Instrumentation Unit Saudi Aramco

Dr. Hesham Kamal Al-Fares Symposium Co-Chairman Chairman of Systems Engineering King Fahd University of Petroleum and Minerals

POST SHOW REPORT Mohammed Loch President & CEO DMS Global Director Industry Development ISA

9:00 am -9:30 am Exhibition Ribbon Cutting 9:30 am -10:10 am Keynote Speech Key Note Chair

Dr. Magdi Sadek Mahmoud Distinguished Professor King Fahd University of Petroleum and Minerals

Dr. Hassan K. Khalil Michigan State University

10:10 am – 10:30 am Coffee Break Track 1 - Room A - Process Measurement, Automation and Safety 10:30 am - 12:10 pm - Automation Standards and Regulations & PAS Life Cycle Management Track Chair

Speakers

John Kinsley Engineering Consultant Saudi Aramco

Presentation: Intelligent Device Integration Technology Including Cyber Security for the New Industrial World

Co-Chair

Dr Muhammad Faizan Mysorewala King Fahd University of Petroleum and Minerals

40

Automation

Stephen Mitschke Foundation Fieldbus Technology Director FieldComm Group

Dr. Ghalib A. Al Hashim Sr. Engineering Consultant Saudi Aramco Presentation: Collaborative Data-Centric Automation Architecture

| October 2018

Nick Garrett ISA 108 Committee Presentation: How New Standards are Helping Both Old and New Facilities by Aligning Information Management, Process Automation Technology and Work Processes

Dr. Fadi Al-Badour Mechanical Engineering Department King Fahd University of Petroleum and Minerals Presentation: A Time-Frequency and Renyi Information-Theoretic Approach to Condition-Based Monitoring in Rotating Machinery

Abdulmajeed A. AlAbdulhadi SCADA Specialist Saudi Aramco Presentation: Zero Downtime Cross-Systems Migration – Saudi Aramco


POST SHOW REPORT

Track 2 - Room B - Data Analytic Tools and Applications 10:30 am - 12:10 pm Application Integration Track Chair

Maha Abduh Power Systems Automation Engineer Saudi Aramco

Speakers

Dr. Hany Osman Systems Engineering Department King Fahd University of Petroleum and Minerals

Yousef Abu-Askar Masters Student and Research Assistant Systems Engineering Department King Fahd University of Petroleum & Minerals.

Gert Thoonen Business Leader Network Security Services Rockwell Automation

Presentation: Diagnosis and Prognosis for Industrial Systems using Logical Analysis of Data

Presentation: Optimization Based Clustering of Social Network Datasets

Presentation: How to Accelerate Industrial Performance in a Digital World

Co-Chair

Dr. Harun Pirim King Fahd University of Petroleum and Minerals

Adeeb H Al-Bukhari Computer Engineer Saudi Aramco

Ibrahim Saleh Al-Jahwari Industrial and Systems Engineer Saudi Aramco

Joan Sanroma Director Sales Europe & Middle East KBC / Yokogawa

Presentation: Imoms and ISA-95

Presentation: Energy Real Time Optimization and Monitoring in Olefins Units

12:10 pm – 1:10 pm Lunch & Prayer Track 1 - Room A - Process Measurement, Automation and Safety 1:10 pm - 3:00 pm - Power System Automation Track Chair

Ghulam Rasul I & C Chief Engineer SWCC

Speakers

Dr. Abdelrahman Al-Odhaibi Solar Energy Research Professor, Water and Energy Institute KACST

Esam Khudr Product Manager Naizak Global Engineering System

Hussain A. Al Marzooq Process Control Engineer Saudi Aramco

Presentation: Control of Energy Solar Systems In Saudi Arabia

Presentation: What are Challenges Facing for New Technologies of Power Automation System

Presentation: SIS Bypass Optimization

Co-Chair

Dr. Sayyid Anas Vaqar King Fahd University of Petroleum and Minerals

Narasimha Rao VSR Rampalli

Ghulam Rasul I & C Chief Engineer SWCC

Presentation: Substation Automation Technologies – Obstacles – Ways to Fix

Presentation: ABC (Automatic Boiler Control) Load Swing Test

Information System Analyst Saudi Electricity Company

Automation

| October 2018 41


POST SHOW REPORT

Track 2 - Room B - Data Analytic Tools and Applications 1:10 pm - 3:00 pm - UAV & Robotics in Industry Track Chair

Speakers

Khaled F. Abusalem Engineering Specialist Saudi Aramco

Co-Chair

Dr. Shokri Selim King Fahd University of Petroleum and Minerals

Steven Fargo CEO DataWing Global

Dr Uthman A. Baroudi Wireless Sensor and Robotic Networks Laboratory, Computer Engineering Department King Fahd University of Petroleum and Minerals

Charles Barlow President Robotics Centre

Presentation: Repeatable and Intelligent Inspections using Unmanned Aircraft and Operational Management Software

Presentation: Cloud-Based Autonomous Indoor Navigation: A Case Study

Presentation: Robotics in Industry

Osama Bakur Bahwal Engineering Specialist Saudi Aramco

Ahmed M. Awfi Instrumentation and Control Engineer Saudi Aramco

Presentation: Adopting Robotic Technologies for Saudi Aramco Operations

Presentation: Unmanned Aerial Vehicles (UAV) Deployment in Oil and Gas Industries – Challenges and Future

3:00 pm – 3:30 pm Coffee Break Track 1 - Room A - Process Measurement, Automation and Safety 3:30 pm - 5:00 pm - Process Safety Track Chair

Speakers

Kiran Patel High Integrity Protection Systems Saudi Aramco

Patrick Flanders VP Business Development ATV HIPPS

Mohammed Alzinati Senior FGS/SIS Engineer – Regional Manager Kenexis

Humod M Al-Humod Senior Manager SABIC - Saudi Kayan

Presentation: Performance Verification Of High Integrity Protection Systems In Upstream Oil And Gas Applications

Presentation: Process Hazardous Analysis Security Concerns

Presentation: Process Safety Leading and Lagging Metrics – “You Don’t Improve What You Don’t Measure”

Mohammed J. Alsahaf Process Control Engineer SATORP

Yusuf S Kapadia Technical Consultant Schneider Electric Systems

Presentation: Refinery Alarm Rationalization

Presentation: Does Digitization Have any Usability in the Domain of Safety Compliance / Safety Lifecycle Management ?

Co-Chair

Dr. Samir H. Al-Amer King Fahd University of Petroleum and Minerals

42

Automation

| October 2018


POST SHOW REPORT

Track 2 - Room B - Data Analytic Tools and Applications 3:30 pm - 5:00 pm - Networking and Wireless Track Chair

Abdullah Al-Nufaii Networks Specialist Saudi Aramco

Co-Chair

Hassan Al Yousef Networks Specialist Saudi Aramco

Speakers

Dr. El-Sayed M. El-Alfy Information and Computer Science Department King Fahd University of Petroleum and Minerals

Dr. Syed Mujahid Systems Engineering Department King Fahd University of Petroleum and Minerals

Abdullah Al-Nufaii Networks Specialist Saudi Aramco

Presentation: Analytics and Deep Learning for Anomaly Detection in Time Series

Presentation: Sparse Component Analysis

Presentation: LTE Evolution in Oil and Gas Automation Industry

Hassan Al Yousef Networks Specialist Saudi Aramco

Khalid Y. Alusail Engineering Specialist Saudi Aramco

Presentation: Reliability and Cybersecurity Controls in Wireless Instrumentation Technologies

Presentation: Building Network High Availablity over WAN Cloud

Day Two - Wednesday 28th March 2018 7:00 am – 8:00 am Registration Track 1 - Room A - Process Measurement, Automation and Safety 8:00 am - 10:00 am Process Analyzers, Sensors & Actuators Track Chair

Syed Nisar

Instrumentation Engineer Saudi Aramco

Speakers

Naren Punde Service Operations Manager, ABB Saudi Arabia & Bahrain Measurement & Analytics, Industrial Automation ABB – Asea Brown Boveri Ltd Presentation: LGR-ICOS Analytical Measurement

Zaheer Juddy Managing Director AIMS

Chandulal Bhatasana Measurement Engineer Saudi Aramco

Presentation: Top Seven Challenges of Analyzer Package Project

Presentation: Pragmatic Alternative of Z-Configuration in Gas Metering System

Co-Chair

Dr. Sami El Ferik Technical Committee Co-Chairman Associate Professor King Fahd University of Petroleum and Minerals

Fawaz AlSahan Engineering Specialist Saudi Aramco Presentation: GWR for Inventory Tanks Level Measurement

Haytham Siyam Sales Director Swagelok KSA Presentation: Grab Sampling

Hesham Hany Abdelmoneim ElBanna Market Manager for Chemical & Refining Swagelok KSA

Automation

| October 2018 43


POST SHOW REPORT

Track 2 - Room B - Data Analytic Tools and Applications 8:00 am - 10:00 am Industrial Control Systems Cybersecurity Speakers

Track Chair

Faisal Askandrani Plant Networks & Systems Saudi Aramco

Gilles Loridon CEO Global Security Network

Ammar Alzaher Business Development Manager Honeywell

Tarek Akrama Regional Sales Manager Kaspersky Lab

Presentation: Energy Sector IEC 62443 Zone & Conduit Implementation Case Studies

Presentation: Effectively Managing Cybersecurity Risks

Presentation: Industrial Cyber Threats – New Imperative for Boardrooms. Real Secure Industry 4.0 Show Case for Interconnected Planet

Co-Chair

Dr. Hany Osman Systems Engineering Department King Fahd University of Petroleum and Minerals

Adetola Olawale Technical Expert – Cybersecurity for Industrial Control Systems Saudi Aramco Presentation: Secure Architecture for Industrial Control System Network

Khalid S. Al-Ghamdi Consultant Saudi Aramco Presentation: Measuring the Effectiveness of Cybersecurity Controls

10:00 am - 10:30 am Coffee Break Track 1 - Room A - Process Measurement, Automation and Safety 10:30 am - 12:00 pm Environmental Data Management Speakers

Track Chair

Nujood Almulla Mechanical Engineer Saudi Aramco

Abhijit Chavan Project Manager – PEMS & Emission Monitoring DURAG Group

Antonius Hameleers Managing Director DURAG Group

Presentation: Predictive Emission Monitoring for Air Emission Monitoring Systems in Middle East: Features, Benefits and Challenges for ME End Users

Ramy Ahmed Diaa Technical Manager GE Sensing (Baker Hughes, a GE Company ) Presentation: Flare Flow Measurement & Combustion Control Solutions to Optimize Operation Cost & Enable Environmental Regulations Compliance

Co-Chair

Dr. Moustafa Elshafei Systems Engineering Department King Fahd University of Petroleum and Minerals

44

Automation

Dr. Moustafa Elshafei Systems Engineering Department King Fahd University of Petroleum and Minerals

| October 2018 Horizontal Directional Drilling Presentation:

for Utility Construction

Dr. Sami Ahmed Al-Hassan Electrical Engineering Consultant Saudi Irrigation Organization (SIO)

Philip Black P.E. Product Marketing Director Wood

Presentation: Global Scada for Farm Irrigation in Saudi Arabia

Presentation: Data Management Best Practices for


Mechanical Engineer Saudi Aramco

Project Manager – PEMS & Emission Monitoring DURAG Group

POST SHOW REPORT

Managing Director DURAG Group

Technical Manager GE Sensing (Baker Hughes, a GE Company )

Presentation: Predictive Emission Monitoring for Air Emission Monitoring Systems in Middle East: Features, Benefits and Challenges for ME End Users

Presentation: Flare Flow Measurement & Combustion Control Solutions to Optimize Operation Cost & Enable Environmental Regulations Compliance

Co-Chair

Dr. Moustafa Elshafei Systems Engineering Department King Fahd University of Petroleum and Minerals

Dr. Moustafa Elshafei Systems Engineering Department King Fahd University of Petroleum and Minerals

Dr. Sami Ahmed Al-Hassan Electrical Engineering Consultant Saudi Irrigation Organization (SIO)

Philip Black P.E. Product Marketing Director Wood

Presentation:

Presentation: Global Scada for Farm Irrigation in Saudi Arabia

Presentation: Data Management Best Practices for Environmental Reporting

Horizontal Directional Drilling for Utility Construction

Track 2 - Room B - Data Analytic Tools and Applications 1:00 pm - 2:30 pm - IIOT “Industrial Internet Of Things” Track Chair

Majid Gwaiz Engineering Specialist Saudi Aramco

Co-Chair

Dr Lahouari Cheded King Fahd University of Petroleum and Minerals

Speakers

Ahmad Abdulwahab Systems Engineering Department King Fahd University of Petroleum and Minerals

Mehul Vaidya Key Account Management & Global Project Pursuit Pepperl+Fuchs ME

Kevin Triplett Engineering Specialist Saudi Aramco

Presentation:

Presentation: Industrial Internet of Things (IIoT) and Industry 4.0 for the Processing Plants

Presentation: Controlling the Future

Descriptive Analysis of Social Networks

Alexis Alexander Product Manager VEGA Technique SAS Presentation: Improving Inventory Management and Operations using IIOT

2:30 pm – 3:30 pm Closing Session & Feedback

Luay Awami Symposium Co-Chairman P&CSD/PASD/ Instrumentation Unit Saudi Aramco

Dr. Hesham Kamal Al-Fares Symposium Co-Chairman Chairman of Systems Engineering King Fahd University of Petroleum and Minerals

Dr. Soloman Almadi ISA-SAS President Technical Committee Co- Chairman Sr. Engineering Consultant Saudi Aramco

Ghulam Rasul Vice President Technical Committee I & C Chief Engineer SWCC

Dr. Sami El Ferik Technical Committee Co-Chairman Associate Professor King Fahd University of Petroleum and Minerals

Mohammed Loch President & CEO DMS Global Director Industry Development ISA Automation | October

2018 45


Dr Lahouari Cheded King Fahd University of Petroleum and Minerals

Alexis Alexander Product Manager VEGA Technique SAS

POST SHOW REPORT

Presentation: Improving Inventory Management and Operations using IIOT

2:30 pm – 3:30 pm Closing Session & Feedback

46

Luay Awami Symposium Co-Chairman P&CSD/PASD/ Instrumentation Unit Saudi Aramco

Dr. Hesham Kamal Al-Fares Symposium Co-Chairman Chairman of Systems Engineering King Fahd University of Petroleum and Minerals

Dr. Sami El Ferik Technical Committee Co-Chairman Associate Professor King Fahd University of Petroleum and Minerals

Dr. Soloman Almadi ISA-SAS President Technical Committee Co- Chairman Sr. Engineering Consultant Saudi Aramco

Ghulam Rasul Vice President Technical Committee I & C Chief Engineer SWCC

Mohammed Loch President & CEO DMS Global Director Industry Development ISA

Automation

| October 2018


POST SHOW REPORT

TESTIMONIALS

93.75% of the participants will recommend the event to their colleagues. “I appreciate all your efforts, the Saudi ISA event was a great success.” Patrick Flanders, VP Business Development, ATV HIPPS

“Have been great to see the DMS team again, very well organized.Do hope to meet again with one of your next Symposiums, and wish you success in whatever comes your way!” Antonius Hameleers, Managing Director, DURAG GROUP

“A great event that was thanks to DMS and their amazing organization. Thank you and the whole team for your efforts in making this event possible and successful.The event really did serve its purpose in knowledge and making good connections.” Ahmad AbdulWahab Mohamed, Systems Engineering Department, KFUPM

“The organization of the meeting was professional. Thank you very much.” Dr. Shokri Selim, KFUPM

Automation

| October 2018 47


POST SHOW REPORT

“Thank you all for the good job.” Dr. Harun Pirim, King Fahd University of Petroleum and Minerals

“Thanks a lot for your cooperation. This successful event wouldn’t be achieved without your and your team’s support.Thanks again and hope to see you in future events.” Abdullah E. Al-Enazi, Process Systems Manager,Refinery-Process Control, Ma’aden Aluminium

“Congratulations on the successful symposium.” Rushood Ahmed Al-Rushood, Sr. Analyst, Finance & Controlling, IT, SABIC

“My deepest thanks for your hard work and a well-organized event.” Abdullah Al- Nufaii, Networks Specialist, Saudi Aramco

“Thank you so much for the opportunity to present at the symposium; it was well organized and a good knowledge exchange experience for me.” Tola Olawale, Technical Expert – Cyber Security for IACS, Saudi Aramco

“It’s my pleasure to participate in such an important and useful symposium. We participated in two useful presentations from my department, and we were so happy with the arrangements and collaboration we had seen. Moreover, we have gained a lot of knowledge by the presented presentations and shared information among other attendees, and from the showroom of different vendors Thank you again and all the best for your coming events.” Hadi M. Al-Shammari, Superintendent, Process Control,Manufacturing / Technical Department, Saudi Aramco Total Refining and Petrochemical (SATORP)

48

Automation

| October 2018


POST SHOW REPORT

THANK YOU We would like to thank all our sponsors and partners for their support in making the KFUPM/ISA-SAS Symposium on Industrial Systems & Control 2018 a success.

Automation

| October 2018 49


POST SHOW

REPORT 2018

• sales@dmsglobal.net • www.dmsevents.net • +971 249 161 71 (UAE Office)

KFUPM / ISA-SAS Symposium on Industrial Systems & Control (SISC) 2018 www.isa-saudi.org 27th - 28th March 2018

Kempinski Al Othman Hotel - AlofKhobar DMS Events is a division Saudi Arabia


W

8

REGIONS COVERED • Asia Pacific • Middle East • Latin America

• North America • Central America • Russia & CIS

• East Africa • North Africa • West Africa

• India • China • Europe

SECTORS COVERED

Oil

Gas

Petrochemicals

Water

Power

Infrastructure

Industrial

Refining

Construction

Pipeline

Offshore

Renewables

Mining

Fertilizer

A Division of

r,

SUBSCRIBE TODAY or contact us for further information

• www.dmsprojects.net • info@dmsglobal.net • Tel: +973 1740 5590


Analytical Instrumentation & Maintenance Systems ·

24x7 On Call Service and Maintenance support

·

Technical Support for Process Operations & Analytical Instrumentation

·

Performance Evaluation, optimization and troubleshooting of Sour Gas Units

·

Air Quality Monitoring System, CEMS, PEMS

·

System Integration facility

·

In-house / Onsite Training & Seminar/Webinar

·

Supply of Analytical Package, Spares, Chemicals and Catalysts

2IÀFHV ORFDWHG Abu Dhabi - Dubai - Qatar - Kuwait - Saudi Arabia - Oman

Automation

| October 2018

Excellent Opportunity to get Low Cost Solutions & Reduce Downtime

AIMS

+HDG 2IÀFH Abu Dhabi, UAE

Tel:+971-2-6436114

Fax:+971-2-6436115 i n f o @a i msgt.com www. a i msgt.com


PROCESS ANALYZERS ANALYZER TECHNOLOGY FUTURE Interview of Mr. Zaheer Juddy Managing Director – AIMS Email: zaheerjuddy@aimsgt.com

These services are widely spread in Analytical Instrumentation, Process Solutions, Sulphur Recovery Optimization and equipment related to Sulphur Recovery Units. Insight: And what are some of the main factors that you feel make AIMS unique from some of the other players in the sector? Zaheer: Service, Service, Service! Service is key to our success. Customer are looking for local service, prompt solution within no time where I believe our company is unique. Our Passion and commitment makes it. The company is led by Technical Experts which teams with young dedicated staff We are well known company for providing Analytical Solution for Sulfur Recovery Units from decades. Our principal is reputed multinational for having expertise and proven technology in this area.

About: Analytical Instrumentation & Maintenance Systems (AIMS) is founded to provide expertise service for Analytical Instrumentation. The company is led by personnel with specialized skills in Analytical Instruments and System Development supported by a team of service personnel in the field of related process automation. These services are widely spread in Analytical Instrumentation, Process Solutions, Sulphur Recovery Optimization and equipment related to Sulphur Recovery Units. Insight: Good day from ISA, I take the pleasure of interviewing young and dynamic entrepreneur in the Middle East for exclusively Analytical Instrumentation Zaheer: Thank You, Thank you for having me again. Insight: So starting off, Please give us brief overview of the company Zaheer: AIMS (Analytical Instrumentation & Maintenance Systems) is founded 10 years before mainly for analyzer service. We started our journey with most difficult applications such as Sulphur recovery unit gas analysis. The company is led by personnel with specialized skills in Analytical Instruments and System Development supported by a team of service personnel in the field of related process automation.

Moreover, we always venture out for new technologies like TFS, TDLAS, Vacuum UV, RAMAN Spectroscopy etc. As AIMS we take these technologies to customer, test it on their sample/process and provide a complete solution to their analytical challenges with performance assurance. TFS and TDLAS are the game changers in the current market. With our technical experts the value addition being made to customize the product is always key for which we are uniquely known.

In the years to come the Oil & Gas Industry will have a lot of uncertainties, but technology can help us to become more independent from these uncertainties Being head office in UAE, we always promote MADE IN GCC. We completely fabricate our design with our In-house capabilities. Likewise, our workshop and testing facilities in Al Khobar and Abu Dhabi are also in operation and we have started doing integration and testing of our Saudi projects in our facility in Al- Khobar. Another important factor which makes us unique is our Service abilities. Our Technical Experts always analyze for root cause of technical issue.

Automation

| October 2018 53


PROCESS ANALYZERS Insight: What is your approach in promoting new technologies, being a regional company, it’s always challenge for vendor/technology registration in bigger groups like ARAMCO, SABIC, PDO, OGC, OXY, OLNG, KNPC and ADNOC etc. Zaheer: Yeah quite a challenging question. We believed in Technology and customer believed in us. So we always ensure the Technology makes its sound. We always believed in Promoting new technologies. So identify the right application and engineer the prerequisites of client and promote. Evaluation was always our need from customers. I remember years back, we implemented the first TDLAS based Analyzer in one of ADNOC plant for LNG process. After its success, now we have many installed base for TDLAS technology across the region for various applications. Recently we have installed first TDLAS SO2 Analyzer for cross-stack measurement at SRU incinerator stack which has shown promising results. Now we are introducing Laser analyzer with hyperreflective measuring cell combined with sonic nozzle probe that will eliminate need of heated sample lines even for extractive sample measurements. The technique will be able to measure multiple gases to ppb level.

Insight: What is the future of an Analyzer Engineer compared to the engineers in other disciplines, Is it worth pursuing for future progress? Zaheer: This is a question asked by many analyzer engineers and I support that promotion ladder for Analyzer Engineer should be opened to the higher positions, I wish to see Analyzer Engineer one day holding lead position in oil & gas plant. Insight: Where to get qualified and trained workforce from? Zaheer: This will remain challenging unless the mindset is changed and importance and criticality of analyzers is realized and subsequently money is invested and efforts are put forth. The workforce should be properly trained before it is set to maintenance tasks at site. The team has to be fully acquainted with sufficient knowledge through trainings by a ISA certified training provider who is equipped with qualified staff and live demo units. Developing a technical handbook specific to a plant is also good idea which we launched for Annual Maintenance Contracts in ADNOC Source Gas and other plants. The handbook assures quality service for analyzers of difference make/model by diversified maintenance team.

We are privilege to utilize the platform like ISA, Technical Symposiums and Technical forums promoting these innovations. Insight: That’s Interesting. So it seems that you’re pretty confident there in the company’s future. And with that being said I hope you have bright future with lots of In-vision you have. Zaheer: Sure, I obviously think the future is extremely strong. As I noted earlier, given our stage of development with multiple shots on goal to mitigate risk, along with the current price point of the company’s stock, I think there is the potential for significant growth and upside assuming we achieve what we need to achieve in all our endeavors. Insight: What is best use of analyzer results to be used in the industry? Zaheer: Input those results into APC (advance process control) system for critical applications like reactors, hydrotreater and CCR platforming unit to optimize the process and maximize yield. There are huge benefits being drawing from the process units that are equipped with APC supported by online Analyzers.

Insight: Being an experienced Analyzer Specialist, what do you consider the seven deadly sins for Analyzer package projects? Zaheer: as saying goes,

“Nothing in the world is more dangerous than sincere ignorance. “You are not entitled to your opinion. You are entitled to your informed opinion.” There are a few mistakes that must be avoided in designing the analytical system,

54

Automation

| October 2018


PROCESS ANALYZERS 1.Location & Plot plan Mistakes During Engineering Phase, identify the analyzer location using 60 % 3D Model of Plot and group the analyzers wisely to eliminate plot plan mistakes

3. DATA SHEETS & DOCUMENTATION MISTAKES Sample Routing needs to be defined so that the analyzer shelter is as near as possible from Take-Off point

Common mistakes in data sheets are follows, I. Analyzer datasheets are OUTDATED II. No Adequate Information Available III. Process Design Specifications are not clear IV. Utilities data is always missed V. Process Composition Information is always a BIG CHALLENGE Following are the basis of a practical Datasheet, • Datasheets need to be updated on Regular basis • Process Composition to be updated with Process Variations for MIN, NOR & MAX • A Standard ISO Datasheet format to be followed to enhance the Vendor to Serve the best • All PEFS documents to be corrected with 3D Modelling and other advanced software at EPC level • PEFS should also include DEW & Bubble Point Calculations

2. Tapping Point Identification & Implementation of PEFS

4. Flawless Project Implementations

Accessibility to the sample take off point is to be considered otherwise it can create a high risk maintenance activity as shown in below photograph.

• Learn from Flaws Committed Every time • Implement Flawless Project Delivery as Sub Project in Every Project

Automation

| October 2018 55


PROCESS ANALYZERS 5. VDRL – An Infinity Document List The Vendor Document Registry List (VDRL) shall only be based on the document that are essential for the project. Otherwise, the analyzer package supplier will be spending more efforts on unnecessary document.

It is important that, Make a Separate VDRL for Analyzers and Make all the documents available to the END USER. Ensure all the information required by the Analyzer Vendor to be submitted by the EPC Contractor. 6. Approved Vendor List (AVL) Challenges AVL Lists needs regular Updates with Advance Technologies Trending in the market – like TFS & TDLAS 7. Site Commissioning and Training Issues Following are important consideration for site commissioning, • Site Acceptance Test Always FAILURE • END User is not familiar with new Technology • Training is often not considered As a remedy, • Involve END User from the Engineering Stage • Train USER at regular intervals of the project • FAT/SAT Procedure to be approved by USER as well Finally LET’s DO THE RIGHT THINGS!...

56

Automation

| October 2018


FEATURED PROJECT

Project Name: Saudi Aramco - Marjan - Oil Field Expansion (Overview) Project Name

Saudi Aramco - Marjan - Oil Field Expansion (Overview)

Name of Client

SAUDI ARAMCO - Saudi Arabian Oil Company

Budget ($ US)

15,000,000,000

Award Date

Q1-2015

Main Contractor

McDermott International NPCC - National Petroleum Construction Company

Facility Type

GOSP

Status

Construction

Start Date

Q4-2014

End Date

Q2-2022

PMC

Wood Group

FEED

WorleyParsons , Wood Group

Location

Marjan, Saudi Arabia

Project Background Saudi Aramco plans to develop its gas-driven fields such as Marjan offshore field. Marjan oil field delivers a high volume of associated gas and the new oil capacity will replace in time declines in oil capacity from other fields elsewhere. Marjan is estimated to have the capacity to produce about 500,000 b/d of crude based on existing production facilities.

Related Projects Saudi Aramco - Marjan - Gas Oil Separation Plant (GOSP) Saudi Aramco - Marjan Cogeneration Independent Steam and Power Project (ISPP) Saudi Aramco - Marjan Water Injection Saudi Aramco - Marjan, Berri, Zuluf and Safaniyah IV Expansion - (Overview)

Project Status 04 Sep 2018

Saudi Aramco awards an integrated services contract to Baker Hughes (BHGE), a General Electric company, for Marjan oilfield. Under the contract, BHGE will provide drilling services, coiled tubing services & drilling fluids engineering for the expansion.

Jun 2018

Aramco awards NPCC the installation contract of 10 oil and gas jackets, tie-in platforms, trunklines and associated offshore gas facilities located across the Marjan field.

May 2018

Saudi Aramco is expected to tender packages 1 and 4 in September. South Korea's Hyundai and Daewoo and Malaysia's Sapura Energy are among non LTA firms that have expressed interest in the two packages.

23 May 2018

Saudi Aramco invites companies to bid for Marjan Water Injection package by June 24th. The scope involves three water injection platforms, three decks, three jackets, installation of hook ups and associated facilities.

Aug 2017

The prequalifed companies for Marjan Water Injection package are Aramco's long term agreement contractors.

Automation

| October 2018 57


FEATURED PROJECT

58

May 2018

The Naphtha and Sulphur recovery units are in the engineering stage and under review. The main construction work did not start to date.

May 2018

Preparation to tender 4 to 6 offshore contracts for the project is ongoing and Aramco will be issuing the invitation-to-bid (ITB) only after the month of Ramadhan.

05 Mar 2018

Saudi Aramco tenders a package for the construction of 10 jackets across multiple fields, including Marjan field.

01 Mar 2018

McDermott reveals that Marjan power system replacement project is at an advanced stage and completion is expected in Q2, 2018.

28 Feb 2018

Saudi Aramco is expected to tender 15 billion worth of Engineering, Procurement and Construction (EPC) contracts for Marjan field development project. The client will tender additional packages for the field throughout 2018.

15 Feb 2018

Aramco has received the Expressions of Interest (EOIs) for Marjan Cogeneration Independent Steam and Power Project (ISPP). The developers have submitted the documents on February 11th, 2018.

13 Feb 2018

Aramco awards Wood Group a contract to provide project management and engineering services to Marjan Oilfield Expansion. The contract duration is five years. The FEED and PMC services will be executed from the company's offices in UK, KSA & India.

Feb 2018

Saudi Aramco is preparing to tender a gas oil separation plant package for the project, that is expected to have a capacity of 300,000 (b/d). The tender is expected to be issued in September 2018.

11 Feb 2018

As the cogeneration plant package is likely to be released in Q4 2018 or Q1 2019, Acwa Power announces its plan and interest to bid for the project.

04 Feb 2018

Aramco is expected to release a tender to build facilities for Marjan oilfield expansion next July. International companies have expressed their interest to bid for the project. The package will be awarded next year and completion is scheduled in 2022.

Jan 2018

Aramco awards McDermott International an Engineering, Procurement, Construction and Installation (EPCI) contract to construct jackets in Marjan field.

11 Jan 2018

Aramco has issued a Solicitation of Interest (SOI) for Marjan's onshore facilities development project. Aramco is seeking interest from international engineering contractors such as Saipem and Intecsa. Invitation to bid is planned to be issued next July.

11 Jan 2018

Saudi Aramco plans to release the tender for Marjan's offshore package in February. The tender involves the construction of three water injection platforms. The scope and the budget of the EPC contract are not yet finalized.

Jan 2018

The budget for the water injection contract is estimated to be within $500-750 million. The scope involves the construction of three water injection platforms, three jackets, three decks, including installation and hook ups.

03 Oct 2017

WorleyParsons FEED contract is expected to take two years time and be complete in Q1, 2019.

09 Aug 2017

McDermott has successfully installed the GOSP-3 electrical auxiliary platform for Marjan oilfield. The contractor has installed the platform using a dual lift configuration.

Automation

| October 2018


FEATURED PROJECT

05 Jul 2017

Aramco awards Saipem a contract for the installation of jackets in Marjan oilfield. The contract includes design, engineering, procurement, construction and installation of the jackets.

Jul 2017

WorleyParsons wins a contract to design and engineer new offshore facilities for Marjan such as platforms and additional pipelines to link to a new gas facility in Tanajib and from there to the expanded natural gas liquid (NGL) facility in Khursaniyah.

Jun 2017

The Marjan increment is a gas-driven expansion, as the state utility neeeds the gas for petrochemicals expansion.

01 Jun 2017

Amec Foster Wheeler wins the contract to provide design and project management services. The contract length is five years and covers the delivery of Pre-FEED, FEED, program management and other support services.

Feb 2017

Marjan expansion contract awards is expected by April 2017

Jan 2017

New megaprojects to develop offshore Marjan are in planning.

Mar 2015

McDermott's contract involves the initial scope of work and includes the engineering, procurement, fabrication and load out of Marjan's platforms and cables.

02 Mar 2015

McDermott wins an Engineering, Procurement, Construction, Installation (EPCI) contract for the initial work & replacement of a power supply system related to Marjan Gas Oil Separation Plant. The contractor expects to commence the main works in Q4, 2016.

Project Scope The scope involves the construction of the following: • 300,000 barrel-a-day gas/oil separation train • New gas processing plant, • co-generation facility and to add a natural gas liquids (NGL) fractionation capacity to an existing facility • Pipelines • Power cables • Associated facilities • Three water injection platforms • Three decks • Three jackets If Aramco releases Marjan's onshore facilities development project as five packages, the following are the expected developments: • Inlet, storage and compression facilities • Onshore oil facilities • NGL recovery and fractionation facilities: - Deethanizer - Refrigeration system - NGL unit substation SS4/SS5/SS14 - Depropanizer and butane treatment - RVP column and pentane - Decolonzer and colour bodies - T72 NGL pre-conditioning and treatment - T72 NGL recovery unit • Gas treatment and sulphur recovery • Utilities, flare and piperack.

Automation

| October 2018 59


FEATURED PROJECT Project Project Finance Finance

The Theexpansion expansionisisaaproject projectof ofSaudi SaudiAramco. Aramco.

Project Project Contractors Contractors PMC PMC PQ PQ

--Wood WoodGroup Group

FEED FEED PQ PQ --McDermott McDermottInternational International --NPCC NPCC--National NationalPetroleum Petroleum Construction ConstructionCompany Company EPC EPC PQ PQ

Bidders Bidders --Wood WoodGroup Group

Awarded Awarded --Wood WoodGroup Group

Bidders Bidders

Awarded Awarded

--McDermott McDermottInternational International --NPCC NPCC--National NationalPetroleum Petroleum Construction ConstructionCompany Company Bidders Bidders

--WorleyParsons WorleyParsons --Wood WoodGroup Group Sub-Contractors Sub-Contractors PQ PQ

--WorleyParsons WorleyParsons --Wood WoodGroup Group Bidders Bidders --

--McDermott McDermottInternational International --NPCC NPCC--National NationalPetroleum Petroleum Construction ConstructionCompany Company Awarded Awarded --WorleyParsons WorleyParsons --Wood WoodGroup Group Awarded Awarded --Baker BakerHughes Hughes

Project Project Schedules Schedules 4Q-2014 4Q-2014 1Q-2015 1Q-2015 1Q-2016 -1Q-2016 4Q-2016 4Q-2016 2Q-2017 2Q-2017 3Q-2017 3Q-2017 2Q-2022 2Q-2022

Project ProjectAnnounced Announced Engineering Engineering&&Procurement Procurement PMC ITB PMC ITB Construction Construction PMC PMC FEED FEED Completed Completed

Project Project Personnel Personnel James JamesWarburton Warburton--Project ProjectManagerManager-WorleyParsons WorleyParsons

60

Automation

| October 2018

Available Availableonly onlyfor forDMS DMSMembers Members


FEATURED PROJECT

KSA Project Listing PROJECT

FACILITY

BUDGET ($US)

STATUS

Addar Chemicals Company (ACC) - Greenfield Sulfolane and Speciality Chemical Plant Advanced Petrochemical Company - Jubail - Pyoil & Pygas Plant Aramco - Berri - Gas-Oil Separation Plant Expansion Aramco - Duba - Tabuk Refined Products Pipeline Aramco - Manifa Oilfield Upgrade Aramco - Ras Tanura Pipeline Dow - Jubail - Polymers Production Facility Farabi Petrochemicals Company - Yanbu Linear Alkyl Benzene (LAB) Plant IMC - Jubail - Methanol Plant Enhancement INOCHEM - Ras Al-Khair - Soda Ash and Calcium Complex INOCHEM - Soda Ash and Calcium Chloride Complex Maaden - Ras Al Khair - Ammonia Plant Maaden - Sabic - Mosaic - Waad Al Shamaal Phosphate City Sulphuric Acid Plant & Power Plant (Package 4) Midchem - Riyadh - Chlor Alkali Plant and Calcium Chloride Plant Pan Asia - Jizan City for Basic & Downstream Industries Purified Terephthalic Acid (PTA) Plant Petro Rabigh Refinery & Petrochemical Complex Expansion - Phase 2 - Clean Fuel Package Petro Rabigh Refinery & Petrochemical Complex Expansion - Phase 2 (Overview) Petro Rabigh Refinery & Petrochemical Complex Expansion - Phase 2 Common Facilities (UO2) & Tank Farm Package (UO3) Petro Rabigh Refinery & Petrochemical Complex Expansion - Phase 2 Clean Fuel - Naphtha Hydrotreater and SRU Petro Rabigh Refinery & Petrochemical Complex Expansion - Phase 2 Vanadium Processing Plant & Caustic Soda Disposal Unit RCC - Jubail - Hydrocarbon Resin Complex SABIC (JUPC) - Jubail - EO/EG III SABIC - ARAMCO - Yanbu - Crude Oil To Chemicals (COTC) Complex Sabic - Debottlenecking and Expansion of Petrokemya Butadiene Extraction Plant SABIC - NIGC - Jubail - GAS Phase 9 SASREF - Jubail - Refinery Modernization and Expansion Saudi Aramco - Yanbu to North Jeddah NGL Pipeline Saudi Aramco - Annual Onshore Maintain Potential Program (MPP) Saudi Aramco - Arab Heavy Pipeline to Yanbu Crude Oil Terminal (YCOT) Saudi Aramco - Arabiyah and Hasbah Gas Field Development Saudi Aramco - Bapco - AB Pipeline Saudi Aramco - Berri Offshore Pipeline Saudi Aramco - Duba - Bulk Plant Terminal Saudi Aramco - Fadhili Gas Plant (Overview) Saudi Aramco - Fadhili Gas Plant - Downstream Packages Saudi Aramco - Fadhili Gas Plant - Industrial Support Facilities (FISF) Saudi Aramco - Fadhili Gas Plant - Main Processing Facilities (Package 1) Saudi Aramco - Fadhili Gas Plant - Offsites & Utilities (Package 3) Saudi Aramco - Fadhili Gas Plant - Sulphur Recovery Unit SRU (Package 2) Saudi Aramco - Haradh Gas Increment Program (Overview) Saudi Aramco - Haradh Gas Increment Program - Freeflow Pipelines Saudi Aramco - Haradh Gas Increment Program - North Haradh Field Gas Compression Facilities Saudi Aramco - Haradh Gas Increment Program - South Haradh Field Gas Compression Facilities Saudi Aramco - Haradh Gas Increment Program - Satellite Gas Compression Facilities Saudi Aramco - Hasbah Field Increment II Saudi Aramco - Hawiyah Gas Plant Expansion

Sulfolane Industrial Production GOSP Multi Products Oil Field Development Oil Polymers Linear Alkyl Benzene (LAB) Methanol Detergents Detergents Ammonia

60,000,000 580,000,000 1,700,000,000 300,000,000 500,000,000 270,000,000 100,000,000 450,000,000 150,000,000 240,000,000 300,000,000 1,000,000,000

Commissioning Feasibility Study FEED EPC ITB Construction Construction Feasibility Study Construction Construction Project Announced Construction EPC ITB

Sulphuric Acid Chlor Alkali

1,500,000,000 53,000,000

Commissioning Engineering & Procurement

Petrochemical Plant

3,800,000,000

EPC ITB

Naptha Aromatics

950,000,000 5,000,000,000

Construction Construction

Naptha

500,000,000

Construction

Sulphur Recovery

150,000,000

Construction

Caustic Soda Hydrocarbon Resin Ethylene Oxide Petrochemical Complex Butadiene Gas Production Petroleum Oil Refinery Gas Maintenance Oil Gas Field Oil Oil Oil Storage Terminal Gas Treatment Plant Gas Processing Gas Treatment Plant Gas Treatment Plant Gas Field Gas Treatment Plant Gas Compression Flowlines

220,000,000 500,000,000 700,000,000 20,000,000,000 450,000,000 40,000,000 95,000,000 600,000,000 5,000,000,000 250,000,000 3,000,000,000 350,000,000 400,000,000 400,000,000 6,600,000,000 650,000,000 100,000,000 2,500,000,000 2,000,000,000 2,500,000,000 1,200,000,000 470,000,000

Construction Feasibility Study Engineering & Procurement FEED Construction Design Engineering & Procurement Construction Construction EPC ITB Construction Construction EPC ITB EPC ITB Construction Commissioning Construction Construction Construction Construction Construction Construction

Gas Compression

1,200,000,000

Engineering & Procurement

Flowlines Gas Compression Gas Field Gas Processing

1,200,000,000 1,200,000,000 1,600,000,000 1,200,000,000

Engineering & Procurement Construction Construction Engineering & Procurement

Automation

| October 2018 61


FEATURED PROJECT

KSA Project Listing

62

PROJECT

FACILITY

BUDGET ($US)

STATUS

Saudi Aramco - Jizan Export Refinery (Overview) Saudi Aramco - Jizan Export Refinery - Crude Distillation Unit / Vacuum Distillation Unit, Flare & Pipe Rack Complex Saudi Aramco - Jizan Export Refinery - Diesel Hydro-Treater Unit Saudi Aramco - Jizan Export Refinery - Hydrocracker Unit Saudi Aramco - Jizan Export Refinery - Naphtha Processing and Aromatics Complex Saudi Aramco - Jizan Export Refinery - Sour Water Stripper & Amine Regeneration Unit Saudi Aramco - Jizan Export Refinery - Tank Farms Saudi Aramco - Jizan Export Refinery - Utilities Package Saudi Aramco - Juaymah - Enhanced LPG Piping Network Saudi Aramco - Khurais Arabian Light Crude Increment Program Saudi Aramco - Liquefied Gas Station For Shedgum & Uthmaniya Gas Plants Saudi Aramco - Liquefied Natural Gas (LNG) Receiving Terminal Saudi Aramco - Marjan - Gas Oil Separation Plant (GOSP) Saudi Aramco - Marjan - Oil Field Expansion Saudi Aramco - Marjan Cogeneration Independent Steam and Power Project (ISPP) Saudi Aramco - Marjan, Berri, Zuluf and Safaniyah IV Expansion - (Overview) Saudi Aramco - Master Gas System Expansion (MGSE) (Overview) Saudi Aramco - Master Gas System Expansion (MGSE) - Phase II - Package 1 Western Region Pipeline Saudi Aramco - Master Gas System Expansion (MGSE) - Phase II - Package 3 Eastern Region Pipeline Saudi Aramco - Master Gas System Expansion (MGSE) - Phase II - Package 2 Central Region Pipeline Saudi Aramco - Master Gas System Expansion (MGSE) Phase II Booster Compressor Stations Saudi Aramco - North Jeddah Bulk Plant Saudi Aramco - Offshore Maintain Potential Programme (MPP) Saudi Aramco - Ras Tanura Refinery - Clean Fuels Project Saudi Aramco - Shedgum to Yanbu Natural Gas to Liquids (NGL) Pipeline (SHY 1 Loops 4 & 5) Saudi Aramco - Southern Area Oil Operations (SAOO) Saudi Aramco - Total - Satorp - Jubail - Petrochemicals Complex Saudi Aramco - Unconventional Gas Program - Shale Gas Production Saudi Aramco - Unconventional Gas Program - Tight Gas Production Systems A Saudi Aramco - Unconventional Gas Program - Tight Gas Production Systems A and B (Overview) Saudi Aramco - Unconventional Gas Program - Tight Gas Production Systems B Saudi Aramco - Uthmaniya Gas Treatment Units Saudi Aramco - Yanbu - Storage Tanks and Associated Equipment Saudi Kayan - Jubail - EO/EG Debottlenecking SDC - Jubail - Surfactants Manufacturing Plant Yansab - Yanbu - Ethylene Glycol DBN Yasref - Yanbu - Clean Fuels Interfacing Facilities

Petroleum Oil Refinery

2,100,000,000

Construction

Crude Oil Distillation Unit Diesel Hydro Desulphurisation (DHDS) Hydrocracker Hydrotreating Oil Production Oil Storage Tanks Offsites & Utilities Gas Pipeline Oil & Gas Field Natural Gas Liquefaction (NGL) Liquefied Natural Gas (LNG) GOSP GOSP Co-Generation Oil & Gas Field Natural Gas Liquefaction (NGL)

500,000,000 220,000,000 250,000,000 1,040,000,000 500,000,000 1,500,000,000 300,000,000 100,000,000 3,000,000,000 74,000,000 1,000,000,000 5,000,000,000 15,000,000,000 500,000,000 7,000,000,000 4,050,000,000

Construction Construction Construction Commissioning Construction Construction Construction Engineering & Procurement Construction Construction Feasibility Study Construction Construction EPC ITB Construction Construction

Gas

830,000,000

Construction

Gas

374,000,000

Construction

Gas

367,000,000

Construction

Compressor Station Bulk Storage Plant Oil & Gas Field Aromatics

800,000,000 270,000,000 7,000,000,000 2,000,000,000

Construction Engineering & Procurement Construction Construction

Liquefied Petroleum Gas (LPG) Pipeline Oil Field Development Petrochemical Plant Shale Gas Gas Field Development

500,000,000 55,000,000 9,000,000,000 7,000,000,000 200,000,000

Construction Engineering & Procurement Feasibility Study Engineering & Procurement Construction

Gas Field Development Gas Field Development Gas Network Gas Storage Tanks Ethylene Oxide Surfactants Ethylene Glycol Gas

3,500,000,000 800,000,000 800,000,000 270,000,000 120,000,000 50,000,000 100,000,000 48,000,000

Construction Construction Construction Engineering & Procurement Construction FEED Construction Construction

Automation

| October 2018


PROCESS SAFETYÂ

Abdul Karim H Al-Sinan & Partner for Trading (Kytos Arabia) is a Saudi company established in 1985 as supplier focused on providing goods and services to the oil and petrochemical industries with the management commitment on utilizing the technology to protect and preserve the environment. Kytos Arabia is a leading supplier of Analytical Instruments for the Process On-Line Analyzers, Laboratory Equipments and general instrumentations. The applications of these instruments extend from the product quality control to the Environmental Monitoring and Staff Safety. Our scope includes site preparation, installation, commissioning and user training. Our organization is focused on servicing and providing the best application support to our clients.

E-mail: sales@sinanakh.com

www.sinanakh.com

Automation

| October 2018 63


For more information, contact us email: info@dmsglobal.net • tel: +973 1740 5590 www.dmsglobal.net


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.