02. Earth 3D Printed Pavilion

An Earth 3D Printed Pavilion:

The Earth 3D printed pavilion was to be designed considering a given printing length which would ensure total printing time of 3 weeks.

The design focuses on printing the fifth facade (The overhead printing area) by using the stability through geometrical explorations.

The parameters considered to design this were,

1. Surface Area not more than 56 sq.m.

2. Printing Length - 4800 mm

3. Printing time - 15 days

4. Per day printing target of 20cm

The design process follows bottom to top approach. First step is to design a module which should have a potential to proliferate further to design the larger space.