PAG Camera Support Product Catalogue by Digital Precision Systems Ltd.

PAG is Your Partner in Power Welcome to the PAG Product Catalogue. Here you will find information to help you choose the best portable power and lighting products for a wide range of equipment including HD DSLR cameras, handheld camcorders, broadcast ENG cameras, high-definition digital cinema and 3D camera set-ups.

Introduction

PAG offers high-performance batteries to meet all your power requirements; chargers that intelligently and efficiently achieve the best from your batteries, even after years of demanding use; and camera lights that give you the correct source of illumination for any professional situation, in the most versatile and economic way. Safety, reliability and durability come as standard. PAG is the British-based designer and manufacturer of the most technologically advanced power and lighting products for broadcasting organizations, cinematographers, video production companies, equipment hire companies, professional videographers, the military and civil authorities. When you buy a PAG product you enter into a partnership with a company that will support you throughout that product’s lifetime, into your next purchase, and right through your professional career.

Industry Pioneers

Technological Innovation

PAG began designing and manufacturing production and post-production equipment for the film industry over 40 years ago. During the 1980s the demand for power for the first portable electronic cameras led the company into the Broadcast Television arena.

PAG has always maintained its own Research & Development facility, which has enabled the company to develop the world-leading technology that is embodied throughout its product range today:

• PAG introduced one of the industry’s earliest battery mounting systems, the PAGlok System, which is still widely used today. • PAG pioneered microcomputer-controlled fast-charging for broadcast camera batteries with the introduction of PAG ACS (Advanced Charging System). It had previously been believed that fast-charging was dangerous and would result in reduced battery life. PAG proved the opposite was possible.

Premier Quality It is PAG’s intention to create the highest quality product for the market. Safety, reliability and durability are the prime concerns at all stages of a product’s development. The name ‘PAG’ on a battery, charger or light is an assurance that only the highest-quality materials have been used in its construction, and that it has been designed to have the longest possible service life.

• PAGlink is the only battery system that enables you to link multiples of batteries. • PAG’s unique charging software is the best for extending battery life. • Paglight is the only halogen, HMI and LED on-board camera light.

Bespoke Power PAG can adapt or develop its products to the specific requirements of your organisation’s working preferences. This bespoke service is possible because PAG is the originator, designer and manufacturer of its products. PAG’s specialist knowledge and experience is invaluable in helping you achieve the perfect portable power and camera lighting system for your company.

Contents SYSTEMS DIAGRAM

BATTERIES

PAG’s Total Battery Design Philosophy

PAGlink Batteries

PAG L95e Batteries

PAG L95 & L110 Time Batteries

PAG L190e Batteries

PAG ZL-Series Batteries

Pagbelt NMH

CHARGERS

13 13

PAG Cube Simultaneous Chargers

PAG Rack-Mountable Chargers

PAG Universal Chargers (PAGlok, NP1 etc)

PAG Low-cost Chargers

PAG Charge Adaptors

LIGHTING

Standard Paglight (12V)

Service Support

Standard Paglight Accessories

PAG provides full technical support throughout a product’s lifetime, which includes servicing, repairs and technical advice. The quality of this service is second-to-none, and is one of the major reasons that broadcast organisations choose PAG.

Standard Paglight Kits

Mini Paglight (12V)

Paglight C6 (6V)

PAG’s authorised service centres share PAG’s specialist knowledge and experience. Using these companies ensures the continuation of the quality standard for which you first chose PAG products.

Paglight 250W

Mounting Options (all Paglights)

Worldwide Availability PAG products are available via a worldwide network of companies and agents as well as our on-line sales service at www.paguk.com

Contents

PAG Chargers Extend Battery Life

CAMERA SUPPORTS

7.2V POWER SOLUTIONS

BATTERY MOUNTS & ADAPTORS

Dual Battery Mounts

CONTINUOUS POWER UNITS

RADIO MIC RECEIVER BRACKETS

AIR TRANSPORTATION

WARRANTY AND SERVICE

PAG Advanced Battery Systems PAG V-Mount System PAG V-Mount batteries can also be charged using the appropriate Sony charger

NEW PAGlink System HighPower Linking Batteries

9510 Snap-on to V-Mount Adaptor

9303 PL96e Battery

9553V Power Plate dual battery mount for V-Mount batteries

9304 PL96T Time Battery

9702V PAG Cube 4-channel simultaneous charger featuring Intelligent Parallel Charging 9360 L95 Time Battery

9522V/V-Mount Connector

9512 PAGlok to V-Mount Adaptor

9553 Power Plate dual battery mount for PAGlok batteries

9302V L110 Time Battery

9613V PAG V2 2-channel sequential charger 9310V L95e Battery

9365V L190e Battery

PAGlok System

Batteries

9317V ZL-125 Time Battery

9315V ZL-50 Battery

9316V ZL-150 Battery

Other formats can be charged via the front PP90 sockets of AR124PLD & Quasar chargers using the appropriate charge adaptor.

9702 Cube iPC

9522/64 V-Mount to PAGlok Adaptor

9551 Power Plate dual battery mount for PAGlok batteries

9382 L95 Time Battery

9302 L110 Time Battery

9317 ZL-125 Time Battery

9792 AR124PLD

9522/PAGlok Connector

9518 Snap-on to PAGlok Adaptor

9752 Quasar/PSU 9726 Quasar

9551V Power Plate dual battery mount for V-Mount batteries

9310 L95e Battery

9365 L190e Battery

9315 ZL-50 Battery

9613 Freelancer

PAG Snap-on System

All-Chemistry PAG chargers incorporating patented sliding Snap-on compatible connectors, suitable for charging PAG Li-Ion and some Anton-Bauer batteries (not Dionic). PAGlok and V-Mount batteries can also be charged via the front PP90 sockets using the appropriate charge adaptor. 9552V Power Plate dual battery mount for V-Mount batteries to camera with Anton-Bauer Mount

9795 PULSAR

9511 V-Mount to Snap-on Adaptor

9727 QUASAR

9310A L95e Battery 9517 PAGlok to Snap-on Adaptor

9316 ZL-150 Battery

9552 Power Plate dual battery mount for PAGlok batteries to camera with Anton-Bauer Mount

9383 L95 Time Battery

9302A L110 Time Battery 9753 QUASAR/PSU

PAG’s Total Battery Design Philosophy

Batteries Technologically Advanced

No Cell-Imbalance

PAG batteries are the most technologically advanced in the industry. They incorporate many unique proprietary features designed to assist the cameraman and prolong battery life.

The Li-Ion cells are matched to extremely close tolerances so that the battery pack is perfectly balanced. Severely imbalanced batteries can leak electrolyte and Li-Ion cells cannot be rebalanced after assembly. The low-resistance inter-cell nickel strapping and cell layout are constructed to optimize current sharing, reducing one of the common causes of cell-imbalance.

PAG batteries are manufactured to withstand the strains and stresses of use in the harshest environments, and to perform consistently over their natural lifetime.

PAG is Synonymous with Safety PAG invests a great deal of time and money designing and manufacturing safe battery systems which meet very stringent technical requirements.

Compatibility

PAG ensures that the battery is allowed to operate only within strict limits. PAG could allow higher charging voltages, and lower discharge voltages, which would create a battery with a slightly higher capacity. PAG could also allow a higher current to be drawn, however, the result would be reduced battery life and an increased chance of electrolyte leakage. Accordingly, the battery’s internal protection circuits and the sophisticated protection software have been set conservatively, with safety and battery longevity as the prime considerations.

PAG has always embraced universality. It is the only manufacturer that offers products that are compatible with the four most popular battery mounting systems: V-Mount, PAGlok, Snap-on (Anton Bauer) and NP1. PAG also offers mount adaptors that enable you to convert systems.

Why Li-Ion? Modern cameras and working conditions require lightweight, reliable batteries, with extended run-times, longer cycle lives and accurate run-time information. PAG Li-Ion batteries are designed for such conditions. They utilise advanced, high-quality Li-Ion cell-technology that possesses a high energy density, making it particularly well-suited to powering a wide range of modern cameras.

PAG’s electronic protection system guards against: over-voltage, under-voltage, over-current, over-charge, over-discharge, overtemperature, under-temperature and inappropriate charge sources. The protection circuits are fast-acting, and able to withstand highvoltage transients and reverse voltages.

Two 95 watt-hour PAG Li-Ion batteries will provide enough power for a day’s shooting for most broadcast camera set-ups that include an on-board light. PAG Li-Ion batteries are compact and can be transported easily in your camera bag.

Multiple-levels of safety, backed-up with proven software-driven mechanisms, are included so that safe operation is not totally dependent upon the continual operation of a single protection circuit.

PAGlink Li-Ion batteries can be linked to provide a much higher current draw capability, often required for powering high-definition cameras and accessories used for digital cinematography.

The circuit boards within the battery are designed so that all points of high voltage are separated by the maximum possible isolation gap, thereby negating the chances of a problem even if electrolyte were to leak across the board.

One of the benefits of Li-Ion technology is the low self-discharge rate. This means that batteries do not have to be topped-up if they have not been used for a few days. There is also no ‘memory effect’ as Li-Ion batteries do not suffer long term problems as a result of partial charging and discharging.

Latest Cell-Technology PAG uses only the latest, premium-quality, branded Li-Ion cells in its products. High-quality cells are a vital prerequisite to the creation of a safe Li-Ion battery. Low-quality cells, which have crept into our industry, are susceptible to internal shorts. The name ‘PAG’ on a battery is an assurance that only the highest-quality materials have been used in its construction. PAG’s cell-testing programs continuously assess all relevant cells from reputable manufacturers and the company selects the best using a number of criteria, including headline capacity, cycle life, voltage holdup under load, and most importantly, safety. However, safety and reliability are not merely determined by the choice of cell - it is the total battery design philosophy that is important.

Batteries

PAG uses only the highest quality components in the construction of its batteries. Safety, reliability, and durability are the prime concerns, from conception to final assembly.

As a final, absolute protection against electrolyte leakage, the circuit boards are completely coated with Parylene, a conformal coating that is usually reserved for specialist aerospace and medical applications. In long-term tests, Parylene was the only circuit coating material which was not softened and eventually penetrated by the cell electrolyte. This expensive, but essential process is unique to PAG batteries and effectively guarantees that there will not be a fire in the event of electrolyte leakage.

Polycarbonate Cases The mechanical design of the battery provides protection in the event of accident or abuse, cradling the cells against damaging shock and vibration. PAG battery cases are manufactured from high-impact, injection-moulded polycarbonate. The material is inherently very strong (it is used for motorcycle crash helmets) and is unaffected by the solvent powers of the battery electrolyte. Commonly used materials, such as ABS, are dissolved and weakened by the electrolyte. PAG cases also feature non-slip external features for secure handling.

continued over

PAG’s Total Battery Design Philosophy Capacity Indication PAG’s battery capacity indication technology is the most advanced in the industry. PAG Time Batteries incorporate a built-in capacity indicator and run-time display that is more accurate than any other available. It is one of the best examples of superior PAG technology.

The battery’s internal processor achieves this by taking into account the changes of load that occur during use, the charge status, the condition of the cells, and the ambient temperature. PAG is the only company to have achieved this.

PAG’s revolutionary integral battery display software was designed and developed at a time when the LED ‘fuel-gauge’ was state-of-the-art. The Time Battery features an alpha-numeric LCD that provides a continually updated prediction of remaining equipment run-time, on-load, to a resolution of 1 minute. Capacity is displayed in Ah (to a resolution of 0.1Ah) and percentage (to a resolution of 1%).

PAG’s lower-cost e-series batteries incorporate a 5-LED capacity indicator that is able to show percentage state-of-charge, and on-load run-time to a resolution of 10 minutes. Additionally, the following information is available via the battery display: battery software version number; total cycle count to date; state-of-charge; and internal cell temperature.

Numeric LCD Run-Time & Capacity Indicator PAG Time Batteries incorporate a numeric LCD that displays remaining run-time and battery capacity. At the press of a button it shows run-time against load...

...in hours...

...followed by minutes.

Available capacity is also displayed, in ampere-hours (0.1Ah increments)...

...followed by percentage (1% increments).

The ‘MINS’ LED then flashes twice.

The number of minutes is indicated: 1 LED = 10 mins.

Batteries

5 LED Run-Time & Capacity Indicator Capacity is displayed as a percentage (each LED = 20% approx.) 1 LED flashing = less than 10% of capacity available.

Two button presses on-load activates the time display. The ‘HRS’ LED flashes twice.

The number of hours is indicated by the number of lit LEDs: 1 LED = 1 hour.

UN Testing PAG Li-Ion batteries are tested, by an independent test facility, for compliance with United Nations specifications (a requirement of air transport and civil aviation authorities). Testing is required because poorly constructed Li-Ion batteries have been known to break down internally and self-ignite (See Air Transportation on Page 34).

• The PAG V-Mount L95e (Model 9310V) displays available capacity as a percentage in the Sony camera viewfinder. • The PAG L95eR (Model 9310R) displays available capacity as a percentage in the Red One camera viewfinder.

A test report for each of PAG’s Li-Ion batteries, and not just the individual cells, can be obtained from PAG Ltd.

• The PAG Snap-on L95e (Model 9310A) displays available capacity in the viewfinder of cameras that use the Anton-Bauer system.

Charger Communication & Longer Battery Life

Upgradeable Firmware

PAG Li-Ion batteries incorporate an integral digital communication system which speaks to PAG chargers and determines the right charge regime for the battery; thereby achieving the maximum capacity safely, and ensuring a longer battery cycle life.

PAG batteries are firmware upgradeable, so that the program can be updated in the field, if necessary, without the need to open the battery case.

Service and Technical Support Viewfinder Data Display PAG batteries support various viewfinder data displays, to supply the state-of-charge stored in the battery’s integral computer, for display in the camera viewfinder. • The PAGlink battery system allows multiple batteries, working as one, to report their collective state-of-charge information for display in the camera viewfinder. PAGlink supports all viewfinder information systems and adapts automatically once connected.

PAG provides full technical support throughout a product’s lifetime. The quality of this back-up service is second-to-none because PAG is the concept originator, design authority and manufacturer of its products. It is one of the main reasons why broadcast organisations choose PAG.

PAGlink High-Power Linking Batteries • A one-system power solution for all cameras • The only system that allows you to link multiples of batteries • Smaller, lighter V-Mount Li-Ion batteries with a higher energy density • Transportable by passenger aircraft without quantity restriction • Higher capacities and longer run-times • Draw up to 12A when linked, ideal for HD or 3D camera set-ups • Built-in run-time indication • Compatible with all viewfinder capacity indication systems • Hot-swap the rear battery while linked for constant power • Charge batteries individually or linked using any reputable V-Mount charger • Improved low-temperature performance

system of smarter, smaller and lighter batteries, with a greater energy density than other linking battery systems. These highquality, 96 watt-hour battery packs are independently UN tested, fully IATA compliant, and can be legally transported by passenger aircraft to any location, without quantity restriction.

Link Multiples of Batteries Smarter, Smaller, Lighter PAGlink V-Mount Li-Ion batteries link together to multiply capacity and run-time, allowing higher-currents to be drawn. PAGlink is a

PAGlink batteries incorporate heavy duty contacts, engineered for high-drain applications. It is the only system that allows you to link multiples of batteries; two, three or

more on your camera. Three linked batteries, weighing less than 2.2kg, create a single unit of nearly 20Ah (288 watt-hours), greatly extending run-time, and allowing up to 12A current to be drawn.

Batteries

Power for all Cameras PAGlink is a one-system power solution for all professional cameras. It has been designed to power the full range of equipment used by broadcast stations, hire facilities and production companies, such as HD DSLRs, handheld camcorders, broadcast cameras and high-end HD digital cinematography and 3D camera setups.

Intelligent Network The PAGlink system creates an intelligent network enabling batteries to communicate and operate seamlessly as one. This unique system allows batteries to be charged as well as discharged whilst linked. The collective stateof-charge can be communicated automatically to any viewfinder information system.

Comparison of Linking Battery Systems: IDX Powerlink HL9

PAGlink PL96e

88Wh

96Wh

Current Draw

10A

12A

High-current pin contacts

Yes

Run-Time Indication

Yes

Viewfinder Display

IDX only

Sony, IDX, Anton-Bauer & Red

Number of batteries that can be linked

0.74kg

0.73kg

Capacity

Weight Dimensions

140 x 85 x 58mm

133 x 84 x 50mm

Charge linked

Yes

External linking latch

Yes

PL96e Battery V-Mount

PL96T Time Battery V-Mount

• 14.8V 6.5Ah, 96 Watt-Hours • Max discharge 8A (12A when linked) • 5 LED run-time indicator • Compatible with all viewfinder capacity displays • Chargers: Cube (9702V), RMC4X (9702VR), V2 (9613V) or Sony & IDX equivalents • 133 x 84 x 50mm / 0.73kg

• 14.8V 6.5Ah, 96 Watt-Hours • Max discharge 8A (12A when linked) • Numeric LCD run-time indicator • Compatible with all viewfinder capacity displays • Chargers: Cube (9702V), RMC4X (9702VR), V2 (9613V) or Sony & IDX equivalents • 133 x 84 x 50mm / 0.73kg

Model 9303

Model 9304

PAG L95e low-cost Li-Ion batteries • Low-cost, high-quality Li-Ion broadcast batteries • High-capacity and long-life cells • 5 LED capacity and run-time display • Viewfinder capacity indication • V-Mount, PAGlok and Snap-on models • Advanced electronic protection system • Circuits Parylene coated • No service charge required • Reset after cut-out with display button • Combine capacities to create a 190Wh power source using a PAG Power Plate • UN tested and IATA compliant • 18 month warranty

Batteries

5 LED Capacity and Run-Time Indicator Capacity is displayed as a percentage, each LED = 20% approx. 1 LED flashing = less than 10% of capacity available.

Two button presses on-load activates the time display. The ‘HRS’ LED flashes twice.

The ‘MINS’ LED then flashes twice. The number of minutes is indicated: 1 LED = 10 mins.

PAG L95e V-Mount

PAG L95eR V-Mount

PAG L95e PAGlok

PAG L95e Snap-on

• • • •

14.8V 6.5Ah, 95Wh Max discharge 7A 5 LED run-time indicator Capacity displayed in Sony viewfinder • Chargers: Cube (9702V), RMC4X (9702VR), V2 (9613V) and Sony Li-Ion • 130 x 86 x 47mm / 0.75kg

Model 9310V

The number of hours is indicated by the number of lit LEDs: 1 LED = 1 hour.

14.8V 6.5Ah, 95Wh Max discharge 7A 5 LED Run-Time indicator Capacity displayed in Red One viewfinder • Chargers: Cube (9702V), RMC4X (9702VR), V2 (9613V) • 130 x 86 x 47mm / 0.75kg

Model 9310R

14.8V 6.5Ah, 95Wh Max discharge 7A 5 LED Run-Time indicator Chargers: Cube (9702), RMC4X (9702R) AR124PLD, Quasar (9726, 9752), Freelancer • 130 x 86 x 42mm / 0.75kg

Model 9310

14.8V 6.5Ah, 95Wh Max discharge 7A 5 LED Run-Time indicator Capacity displayed in camera viewfinder via the Anton Bauer InterActive feature • Chargers: Pulsar (9795) Quasar (9727, 9753), Anton-Bauer Li-Ion • 130 x 86 x 52mm / 0.76kg

Model 9310A

PAG Time Batteries The industry’s premier batteries • The highest quality broadcast batteries • High-capacity and long-life cells • Power & Time Display, resolution of 1 minute, 0.1Ah and 1% • V-Mount, PAGlok and Snap-on models • 95Wh and 110Wh models • Advanced electronic protection system • Circuits Parylene coated • Choose to maximise capacity or cycle life when charging with PAG chargers • Combine capacities to create a 190Wh or 220Wh power source using a PAG Power Plate • UN tested and IATA compliant • 2 year warranty

Batteries

PAG Time Batteries incorporate a numeric LCD that displays remaining run-time and battery capacity. At the press of a button it shows run-time against load...

...in hours...

...followed by minutes.

Available capacity is also displayed, in ampere-hours (0.1Ah increments)...

...followed by percentage (1% increments).

PAG L95 V-Mount

PAG L95 PAGlok

PAG L95 Snap-on

• 14.8V 6.5Ah, 95 Watt-Hours • Max discharge 7A • Power & Time Display: run-time indication with 1 minute resolution • Chargers: Cube (9702V), RMC4X (9702VR), V2 (9613V), Sony Li-Ion • 130 x 86 x 47mm / 0.75kg

• 14.8V 6.5Ah, 95 Watt-Hours • Max discharge 7A • Power & Time Display: run-time indication with 1 minute resolution • Chargers: Cube (9702), RMC4X (9702R) AR124PLD, Quasar (9726, 9752), Freelancer • 130 x 86 x 42mm / 0.75kg

• 14.8V 6.5Ah, 95 Watt-Hours • Max discharge 7A • Power & Time Display: run-time indication with 1 minute resolution • Chargers: Pulsar (9795), Quasar (9727, 9753) • 130 x 86 x 52mm / 0.76kg

Model 9360

Model 9382

PAG L110 V-Mount

PAG L110 PAGlok

PAG L110 Snap-on

• 14.8V 7.5Ah, 110 Watt-Hours

Model 9302V

Model 9302

Model 9302A

Model 9383

PAG L190e More power for HD set-ups • High-quality Li-Ion battery for highdefinition cameras and accessories • Designed for 10A current loads • 190 watt-hour capacity • High-capacity and long life cells • 5 LED capacity and run-time display • Viewfinder capacity indication • V-Mount and PAGlok models • Electronic protection system • Circuits Parylene coated • No service charge required • Reset after cut-out with display button • 18 month warranty

5 LED Capacity and Run-Time Indicator

Batteries

Capacity is displayed as a percentage, each LED = 20% approx. 1 LED flashing = less than 10% of capacity available.

Two button presses on-load activates the time display. The ‘HRS’ LED flashes twice.

The number of hours is indicated by the number of lit LEDs: 1 LED = 1 hour.

Charger Compatibility

Air Transportation

If your charger has NOT been updated for charging the PAG L95e, the following chip-updates are available that will enable you to charge both the L190e and the L95e: Model 9670E for AR Series 2 chargers Model 9670QE for Quasar chargers Freelancer chargers must be returned to PAG to receive the update.

The PAG L190e has a capacity above 160Wh and is therefore unsuitable for transportation by passenger aircraft. For this reason PAG has limited the availability of the L190e to customers in the UK and mainland Europe. A capacity of 190Wh can be achieved by linking two new 96Wh PAGlink batteries. These batteries can be legally transported by passenger aircraft without quantity restriction.

PAG L190e V-Mount

PAG L190e PAGlok

• • • •

14.8V 13Ah, 190 Watt-Hours Max discharge 10A 5 LED Run-Time Indicator Displays capacity in either Sony or Red One camera viewfinder • Chargers: Cube (9702V), RMC4X (9702VR), V2 (9613V), Sony Li-Ion • 175 x 125 x 53mm / 1.47kg

Model 9365V

The ‘MINS’ LED then flashes twice. The number of minutes is indicated: 1 LED = 10 mins.

14.8V 13Ah, 190 Watt-Hours Max discharge 10A 5 LED Run-Time Indicator Chargers: Cube (9702), RMC4X (9702R) AR124PLD, Quasar (9726, 9752), Freelancer • 175 x 125 x 45mm / 1.44kg

Model 9365

PAG ZL-Series Zero-Lithium Travel-Packs • Zero-Lithium travel packs enable you to avoid air-travel restrictions on batteries • 10A current draw capability • 150Wh, 125Wh or 50Wh capacities • High-capacity and long-life Ni-MH cells • Power & Time Display, resolution of 1 minute, 0.1Ah and 1% (ZL-125 only) • V-Mount, PAGlok and NP1 models • 18 month warranty

Air Transportation Certain airlines have refused to let Li-Ion ENG batteries on-board aircraft in hand luggage, despite legitimate air safety certification that proves compliance with IATA regulations for lithium content and United Nations testing. For this reason, PAG has introduced ZL-Series Travel Packs, a range of flight-friendly batteries that contain zero-lithium, and are always welcome aboard.

PAG ZL-150 V-Mount

PAG ZL-125 V-Mount

PAG ZL-50 V-Mount

PAG ZL-NP

• 14.4V 10Ah, 150 Watt-Hours • Max discharge 10A • Chargers: Cube (9702V), RMC4X (9702VR), V2 (9613V) • 208 x 125 x 52mm / 2.35kg

• 13.2V, 125 Watt-Hours • Max discharge 10A • Power & Time Display: run-time with 1 minute resolution • Chargers: Cube (9702V), RMC4X (9702VR), V2 (9613V) • 208 x 125 x 52mm / 2.2kg

• • • •

• • • • •

Model 9316V

14.4V 3.2Ah, 50 Watt-Hours Max discharge 7A 4 LED capacity indicator Chargers: Cube (9702V), RMC4X (9702VR), V2 (9613V) • 130 x 86 x 47mm / 0.88kg

Batteries

The Latest Ni-MH Technology PAG ZL-Series batteries employ the latest Ni-MH cell-technology, which has greatly improved since its introduction to the industry approximately a decade ago. Customers can now expect a longer cycle life, if batteries are always charged with PAG chargers.

13.2V 3Ah, 40 Watt-Hours Max discharge 7A 4 LED capacity indicator Chargers: AR124NPD (9793) 71 x 182 x 25mm / 0.73kg

Model 9314

Model 9315V

Model 9317V PAG ZL-150 PAGlok

PAG ZL-125 PAGlok

PAG ZL-50 PAGlok

• Chargers: Cube (9702), RMC4X (9702R), AR124PLD, Quasar (9726, 9752), Freelancer • 208 x 125 x 44mm / 2.35kg

• Chargers: Cube (9702), RMC4X (9702R) AR124PLD, Quasar (9726, 9752), Freelancer • 208 x 125 x 44mm / 2.2kg

• Chargers: Cube (9702), RMC4X (9702R), AR124PLD, Quasar (9726, 9752), Freelancer • 130 x 86 x 42mm / 0.88kg

Model 9316

Model 9317

Model 9315

Pagbelt NMH For broadcast cameras or 24V/30V lighting • High-quality Ni-MH battery belts • Top-quality, deep-moulded leather pockets • 12V, 13.2V, and 14.4V models for powering lighting and cameras • 24V and 30V models for powering lighting • High-capacity and long-life cells • Over-Discharge Protection prevents cell imbalance and extends battery life • Integral overnight charger • Widerange AC input for worldwide operation • 10 year warranty on leather cases

The Latest Ni-MH Technology

Batteries

Pagbelt NMH battery belts employ the latest Ni-MH cell-technology, which has greatly improved since its introduction to the industry approximately a decade ago. Customers can now expect a longer cycle life, if the battery belt is always charged with PAG chargers.

Ouput from the the Pagbelt NMH is via two XLR4F connectors

Fast-charge the 24V and 30V Pagbelt NMH using PAG 30V AR Series chargers (singlechannel Model 9763, and four-channel Model 9765)

Pagbelt NMH 24V 10Ah

Pagbelt NMH 12V 10Ah

Pagbelt NMH 14.4V 10Ah

• • • •

• 14.4V 10Ah, 144 Watt-Hours • 3.0kg

24V 10Ah, 240 Watt-Hours Output via 2 x XLR4 connectors Over-discharge protection Integral Overnight Charger (100V-250V AC input) • Fast-chage using a PAG 30V AR Series charger and charge lead XLR4F to XLR4M Model 9449 • Clip-on shoulder harness included • 4.7kg

12V 10Ah, 120 Watt-Hours Output via 2 x XLR4 connectors Over-discharge protection Integral Overnight Charger (100V-250V AC input) • Fast-chage using any PAG universal charger and charge lead PP90M to XLR4M Model 9455 • 2.6kg

Model 9212

Model 9224 Pagbelt NMH 13.2V 10Ah Pagbelt NMH 30V 10Ah • 30V 10Ah, 300 Watt-Hours • 5.5kg

Model 9230

• 13.2V 10Ah, 132 Watt-Hours • 2.8kg

Model 9213

PAG chargers are the secret to extended battery life

Chargers PAG Advanced Charging Systems PAG is the pioneer of microcomputer-controlled fast-charging for broadcast industry batteries. PAG chargers are the most versatile and advanced battery management systems available; they are easy to operate and the latest models are fully automatic. The proprietary software that controls the charging process will extend the working life of your batteries beyond anything that can be achieved using other systems. PAG’s latest chargers incorporate iPC Intelligent Parallel Charging, designed for the simultaneous fast-charging of PAG, Sony and IDX Li-Ion batteries. PAG ACS is a sequential Advanced Charging System suitable for fastcharging PAG Li-Ion batteries as well as Ni-MH and Ni-Cd batteries of any reputable manufacturer.

PAG’s unique Intelligent Parallel Charging software incorporates three phases. First it prepares batteries which are shut down or deeply discharged for charge acceptance. Then it determines the type and stateof-charge of the batteries, and the maximum current that can be applied. Finally, it shares the current intelligently between the channels, briefly addressing the most discharged batteries first, before simultaneously fully-charging all batteries as quickly and efficiently as possible.

PAG Advanced Charging System PAG introduced accurate fast-charging for broadcast camera batteries when it was thought wrongly to be damaging. The PAG ACS software has evolved over time as new battery technologies have been adopted by the industry. PAG ACS chargers are intelligent, requiring only the positive and negative connections to analyse the battery and apply and monitor the charging process.

Fast-Charge Termination To perform properly, batteries must be charged by exactly the right amount. Undercharging gives less than full capacity and a shorter run-time, whereas overcharging can permanently damage the battery. To ensure that the fast-charge current is stopped at the correct time, and in order to detect the many varied problems associated with faulty batteries, the PAG ACS microcomputer uses a combination of several cut-off algorithms. The software developed to do this is the most powerful and complex part of the PAG ACS charger.

Automatic Charge-Rate Selection In acknowledgement of the wide variety of batteries that are available to the camera operator, PAG has incorporated further revolutionary software in its chargers that provides an easy and efficient system of battery management. When a battery is connected to the charger, a period of analysis ensues in order to detect the battery’s cell-chemistry, state-ofcharge, capacity and condition. The charger then automatically applies the correct regime to achieve a fully charged battery with the maximum capacity and cycle life.

A Variety of Features The features of each PAG charger can vary to include either 2 or 4 channels, a built-in camera power supply or special charging programs.

Li-Ion Recovery PAG chargers will automatically recover PAG Li-Ion batteries when the output has been shut down by the battery’s internal protection circuit. Recovery Charge The Recovery Charge Program can be used to regain battery capacity lost as a result of extended storage or operation under adverse conditions. Maintenance Charge An automatic Maintenance Charge is applied to Ni-Cd and Ni-MH batteries, after full charging, to keep them in peak condition and ready for instant use. This program is not required for Li-Ion batteries. Information Displays Large backlit LCD displays indicate the status of the battery and the charger, providing information such as charge loaded and battery voltage. AC Camera Power Separate Camera Power Adaptors are available for use with the Cube chargers that enable you to power your camera from an AC mains supply. The PAG CPA outputs approximately 100W and is suitable for use with modern broadcast cameras which can be powered by 14.8V Li-Ion batteries.

Chargers

PAG Intelligent Parallel Charging

Discharge/Charge Batteries which have been repeatedly subjected to partial discharging will benefit from the analytic Discharge/Charge program which also measures and displays available battery capacity.

Certain Quasar charger models incorporate a Camera Power Supply that provides a nominal 50W suitable for powering most professional broadcast cameras. In power supply mode the Quasar displays an accurate digital bar-graph of power consumption.

Charge a Greater Variety Of Batteries The latest PAG Cube chargers will simultaneously fast-charge PAG, Sony and IDX Li-Ion batteries, as well as sequentially charging Ni-MH and Ni-Cd batteries of any reputable manufacturer within the ranges 4.8V to 14.8V, 1Ah to 10Ah. PAGlok and V-Mount models are available. PAG Universal Chargers are available with a variety of battery connections: PAGlok, V-Mount, Snap-on (for PAG Snap-on batteries only) and NP1 pockets. They incorporate PP90 sockets on their front panels, and are capable of charging a great variety of batteries, within the chargers broad range, via the appropriate charge adaptor.

Construction PAG chargers are designed for location use. They are quiet, cool-running and have a lightweight impact-resistant moulded construction. The latest Cube models incorporate an aluminium frame and a strong, moulded, retractable handle that enables you to carry the charger with four batteries connected. All PAG chargers are designed to high electrical standards, with RFI certification, and are suitable for use in all broadcast environments. PAG charging systems automatically adjust to operate from AC mains supplies worldwide.

PAG Cube A high-powered simultaneous Li-Ion charger • Low-cost simultaneous charger for PAG, Sony & IDX Li-Ion batteries • PAG Intelligent Parallel Charging • High-power 100W output • V-Mount and PAGlok models • Backlit LCD screen • Ultra-compact, lightweight and robust construction • Quiet and cool-running • Retractable handle • Ideal for location use • Accepts firmware upgrades via battery connectors • Worldwide operation

Chargers

Intelligent Parallel Charging

This high-powered charger is capable of supplying 6A at 16.8V, approximately 100W. Charging is fast, efficient and fully-automatic thanks to PAG's unique Intelligent Parallel Charging. PAG iPC software incorporates three phases:

Phase 1 Pre-Charge: Prepares batteries that have been shut down or deeply discharged for charge acceptance. Phase 2 Testing: Determines the type and state-ofcharge of the batteries, and the maximum current that can be applied.

Phase 3 Charging: The charger then shares the current intelligently between the channels, briefly addressing the most discharged batteries first, before simultaneously fullycharging all batteries as quickly and efficiently as possible.

PAG Cube V-Mount

PAG Cube PAGlok

PAG CPA V-Mount

PAG CPA PAGlok

• 4 x V-Mount connectors • Intelligent Parallel Charging for latest PAG, Sony and IDX Li-Ion batteries • Sequential charging for older PAG Li-Ion batteries, and Ni-MH batteries • 157 x 157 x 157mm / 1.19kg

• 4 x PAGlok connectors • Intelligent Parallel Charging for latest PAG Li-Ion batteries • Sequential charging for older PAG Li-Ion batteries, Ni-MH and Ni-Cd batteries in the ranges: 4.8V to 14.8V, 1Ah to 10Ah • 157 x 150 x 150mm / 1.19kg

• AC Camera Power Adaptor for use with V-Mount Cube Charger • Suitable for powering all modern broadcast cameras • Outputs 100W (16.8V at 5.5A) • Requires Model 9450 XLR4 male to female connector • 130 x 86 x 47mm / 0.02kg

• AC Camera Power Adaptor for use with PAGlok Cube Charger • Suitable for powering all modern broadcast cameras • Outputs 100W (16.8V at 5.5A) • Requires Model 9450 XLR4 male to female connector • 130 x 86 x 47mm / 0.02kg

Model 9702V

Model 9702

Model 9701V

Model 9701

PAG RMC4X Rack-mountable battery charger for OB Vehicles • Simultaneous charger for PAG, Sony & IDX Li-Ion batteries • PAG Intelligent Parallel Charging • High-power 100W output • V-Mount and PAGlok models • Backlit LCD screen • 1 unit fits in a 9.5” rack and 2 fit side-by-side in full 19” rack • Measures 1U high • Ideal for use in outside broadcast vehicles or workshops • Quiet and cool-running • Accepts firmware upgrades via battery connectors • Worldwide operation

Chargers

Two Units Fit a 19” Rack The RMC4X is designed to be mounted in a half-width (9.5”) racking system, and measures 1U high. However, two units can be mounted side by side in a standard fullwidth 19-inch rack, by using connecting plates, available from PAG. The charging connectors can be vertically mounted alongside the rack.

RMC4X-V Charger V-Mount

RMC4X-P Charger PAGlok

Battery Charging Connectors

• 4 x XLR4 to V-Mount charging connectors • Intelligent Parallel Charging for latest PAG, Sony and IDX Li-Ion batteries • Sequential charging for older PAG Li-Ion batteries, and Ni-MH batteries • 210 x 201 x 44mm / 1.8kg

• 4 x XLR4 to PAGlok charging connectors • Intelligent Parallel Charging for latest PAG Li-Ion batteries • Sequential charging for older PAG Li-Ion batteries, and Ni-MH & Ni-Cd batteries in the ranges: 4.8V to 14.8V, 1Ah to 10Ah • 210 x 201 x 44mm / 1.8kg

• The RMC4X Charger is configured for use with either V-Mount or PAGlok batteries • Each charger is supplied with four battery charging connectors that incorporate a 1m long cable terminated with an XLR4 connector, suitable for connection to the XLR4 sockets situated on the back panel of the charger • PAG is able to provide a mounting board for the charging connectors, made to your specification, at an additional cost

Model 9702VR

Model 9702R

PAG Universal Chargers Charge a broader range of batteries • Sequential, all-chemistry chargers for a broad range of batteries • 4.8V to 14.8V, 1Ah to 10Ah • PAGlok, Snap-on and NP1 models • Front PP90 sockets allow the charging of batteries via PAG charge adaptors • 2 or 4 channels • PAG ACS microcomputercontrolled charging extends battery life • Recovery Charge regains capacity lost during storage • Li-Ion battery recovery • Backlit LCD screen display battery status

Chargers

• Forward compatible via chip-upgrade kits

Auto Charge-Rate Selection

Discharge/Charge Program

This feature provides the easiest and most efficient way of managing batteries that vary in terms of cell chemistry, voltage and capacity. The program detects the battery’s cell chemistry, state-of-charge, capacity and condition, and then applies the correct regime to achieve a fully charged battery with the maximum capacity and cycle life. The charge rate can also be manually set at 2A, 3A or 4A.

Four-channel models feature PAG’s analytic Charge/Discharge program, which ‘repairs’ batteries that have been repeatedly subjected to partial discharging. The program measures and displays battery capacity.

High Build Standard PAG universal chargers are designed to high electrical standards, with RFI certification, and are suitable for use in all broadcast environments.

AR124PLD PAGlok

Quasar PAGlok

AR124NPD NP1

• 4 x PAGlok connectors, 4 x PP90 sockets • Sequentially charges PAG Li-Ion batteries, Ni-Cd and Ni-MH batteries in the ranges 4.8V to 14.8V, 1Ah to 10Ah • Discharge/Charge Program • 82 x 168 x 240mm / 1.23kg

• 2 x PAGlok connectors, 2 x PP90 sockets • Sequentially charges PAG Li-Ion batteries, Ni-Cd and Ni-MH batteries in the ranges 4.8V to 14.8V, 1Ah to 10Ah • 72 x 135 x 185mm / 0.88kg

Model 9726

• 4 x NP1 pockets, 4 x PP90 sockets • Sequentially charges PAG Li-Ion batteries, Ni-Cd and Ni-MH batteries in the ranges 4.8V to 14.8V, 1Ah to 10Ah • Discharge/Charge Program • 78 x 142 x 240mm / 1.07kg

Model 9792

• Incorporating 50W camera power supply

Model 9793

Model 9752 Pulsar Snap-on • 4 x Snap-on connectors, 4 x PP90 sockets • Sequentially charges PAG Li-Ion batteries, Ni-Cd and Ni-MH batteries in the ranges 4.8V to 14.8V, 1Ah to 10Ah • Discharge/Charge Program • Talk-Circuits communicate with L95 Time Battery Model 9383 • 82 x 168 x 240mm / 1.23kg

Model 9795

Quasar Snap-on • 2 x Snap-on connectors, 2 x PP90 sockets • Sequentially charges PAG Li-Ion batteries, Ni-Cd and Ni-MH batteries in the ranges 4.8V to 14.8V, 1Ah to 10Ah • 80 x 135 x 185mm / 0.84kg

Model 9727 • Incorporating 50W camera power supply

Model 9753

PAG Freelancer and V2 Low-cost chargers • Sequential, all-chemistry chargers for PAG Li-Ion, Ni-Mh and Ni-Cd batteries • 12V to 14.8V, 1.5Ah to 10Ah • V-Mount and PAGlok models • Fully-automatic • 2 channels • PAG ACS microcomputer-controlled charging extends battery life • Li-Ion battery recovery • LED display indicates battery status • Ultra-compact and lightweight • Worldwide operation • Forward compatible via chip-upgrade kits

Chargers

Freelancer PAGlok

V2 Charger V-Mount

• 2 x PAGlok connectors • Sequentially charges PAGlok Li-Ion, Ni-MH and Ni-Cd batteries in the ranges 12V to 14.8V, 1.5Ah to 10Ah • 55 x 115 x 135mm / 0.41kg

• 2 x V-Mount connectors • Sequentially charges PAG and Sony V-Mount Li-Ion and Ni-MH batteries • 72 x 112 x 133mm / 0.43kg

Model 9613V

Model 9613

Vehicle Power

Charger Chip Updates

Vehicle Battery Power Converter

AR Series 2 Chip Update

Quasar Chip Update

• A DC/DC Converter that enables you to power a PAG charger from your vehicle’s battery, via the cigar lighter socket • Suitable for use with PAG AR Series 2, Freelancer, Quasar and Pulsar chargers • 111 x 60 x 30mm / 500g

• Chip-update for charging the L95e and L190e batteries • For AR Series 2 chargers 9792, 9793, 9794 and 9795 (green or yellow labels)

• Chip-update for charging the L95e and L190e batteries • For Quasar chargers

Model 9670E

Model 9670QE

Model 9774

Chargers

PAG Charge Adaptors & Cables/Connectors

PP90M to V-Mount (Intelligent)

PP90M to V-Mount

PP90M to Snap-on

• Incorporates circuits required for charging Sony Li-Ion batteries via the front PP90 sockets of PAG Universal Chargers (AR Series 2, Pulsar and Quasar) • Lead length 300mm

• Charge Adaptor for PAG V-Mount compatible batteries, for charging via the front PP90 sockets of PAG Universal Chargers (AR Series 2, Pulsar and Quasar) • Lead length 300mm

• Charge Adaptor for PAG Snap-on compatible batteries, for charging via the front PP90 sockets of PAG Universal Chargers (AR Series 2, Pulsar and Quasar) • Lead length 280mm

Model 9610

Model 9617

Model 9458

PP90M to NP1

PP90M to PAGlok

XLR4F to PAGlok

• For charging NP1 batteries via the front PP90 sockets of PAG Universal Chargers (AR Series 2, Pulsar and Quasar) • Lead length 450mm

• For charging PAGlok batteries via the front PP90 sockets of PAG Universal Chargers (AR Series 2, Pulsar and Quasar) • Lead length 370mm

• For charging PAGlok batteries via the front XLR4 sockets of PAG 30V AR Series chargers • Lead length 450mm

Model 9576

Model 9514

XLR4F to NP1

XLR4M to XLR4F Coiled

XLR4M to XLR4F Straight

• For charging NP1 batteries via the front XLR4 sockets of PAG 30V AR Series chargers • Lead length 400mm

• Cable for connecting the PAG Camera Power Adaptor to the camera • Lead length 650mm

• Charging cable for 30V AR Series Chargers • Lead length 1m

Model 9579

Model 9450

PP90M to XLR4M

PP90M to XLR4F

• Charging cable for 30V AR Series Chargers • Lead length 1m

• Lead length 150mm

Model 9455

Model 9687

Model 9520

Model 9449

PP90 In-line Socket Model 9686

Paglights Award-winning camera lights

Lighting

Used throughout the world by news broadcasting organisations and videographers, Paglights are the ultimate in camera lighting The Broadcast Industry’s first dedicated camera light The Standard 12V Paglight was the first on-board camera light designed specifically to meet the requirements of the broadcast industry. PAG now offers a family of lights, designed to fulfil a variety of professional requirements, but sharing many of the unique features that made Paglight the industry standard.

Standard Paglight (12V) • The original halogen or arc 12V broadcast camera light is now LED also (Page 18). Dimensions: • 70mm wide x 103mm long x 115mm high • Reflector size: 45mm dia.

Paglights are robust, light-in-weight, cool-running and fullyfocusable. Their versatility has been achieved as a result of PAG’s patented plug-in lamp holder feature. This is best illustrated in the Standard 12V Paglight which is capable of tungsten halogen output, metal-halide arc and LED. LED Technology has gradually improved, addressing the problems that early examples displayed, such as poor spectral distribution and colour temperature. Using improved LED technology, PAG offers a plug-in LED option for the Paglight, to further increase its versatility and provide you with the most economical LED solution. Plug-in lamp holder options for this light also include Softstart, for use with Li-Ion batteries, and the power saving, regulated PowerMax unit, which incorporates a dimming facility called VariLux.

Paglight C6 Kit (6V) • An all-inclusive 6V lighting kit, incorporating 6V battery and charger, designed for use with small camcorders (Page 26).

Lighting

Halogen, HMI and LED

Dimensions: • 45mm wide x 70mm long x 80mm high • Reflector size: 35mm dia.

Smaller lights for smaller cameras

Mini Paglight (12V) • Miniaturised version of the 12V Paglight for use with smaller digital camcorders. Features detachable power base (Page 25). Dimensions: • 45mm wide x 70mm long x 80mm high • Reflector size: 35mm dia.

The Mini Paglight was introduced to suit the dimensions of the smaller, digital camcorders. This miniaturised version of the 12V Paglight can be powered from a range of 12V to 14.8V battery packs and belts. The plug-in PowerArc option makes the Mini Paglight the industry’s most compact yet powerful arc light. A Softstart lamp holder is also available for use with Li-Ion batteries. The Mini Paglight can be mounted to the camera using a variety of detachable power bases (see Page 25). For users of small, handheld camcorders, whether professional or consumer, the Paglight C6 Kit is an ideal solution. This high-quality 6V system provides everything you need: Paglight, diffuser, dichroic, barn doors, battery and charger at a price to suit any equipment budget (see Page 26).

250W handheld location lighting

Paglight 250W • A 250W hand-held location fill-light or ‘basher’ available in 24V and 30V models (Page 27). Dimensions: • Reflector size: 60mm dia.

The Paglight 250W is an ideal ‘basher’ or fill-light, available in 24V and 30V models. It can be used hand-held or stand-mounted on location and incorporates many of the features of the Standard Paglight: quick and easy lamp-changing, detachable power base and a range of accessories (see Page 27).

Standard Paglight (12V) The industry standard

Lighting

Plug-in LED Dimmer Unit

Halogen, HMI or LED - Paglight does it all Revolutionary by Design Paglight is a revolutionary camera light, the first specifically designed to suit professional ENG/EFP requirements, and answer the many requests for an all-embracing, single operator camera light. Fully Focusable Paglight is continuously focusable with a beam angle that is variable from spot to flood. It has a soft, even spectral distribution with no hot spots or flaws. Cool and Versatile PAG's unique patented design makes Paglight the coolest running and most versatile camera light in the industry. Interchangeable plug-in lamp holders fit into the back of the lamp body. Variants of wattage and unit type can be exchanged without handling the lamp. There are five different lamp holder options available. Standard Halogen Lamp Holder Accepts 20W, 35W, 50W, 75W and 100W tungsten halogen bi-pin lamps. Softstart A halogen lamp holder that prevents the cold lamp start-up

surge from activating the over-current protection circuits within Li-Ion batteries. (This is not required when using the lamp output on a Sony camera). PowerMax Control/VariLux A voltage regulated unit that prolongs battery run-time and saves halogen lamp filament life. VariLux is a lamp dimming facility which also conserves battery power. PowerArc Paglight can be instantly converted to HMI by pluggingin the PowerArc unit. The unit consumes only 32W but provides the equivalent of almost 100W tungsten, but at daylight colour temperature. LED Dimmer The highly energy efficient plug-in LED module consumes only 11W, greatly extending battery run-time. The LED Dimmer Unit has a colour temperature that matches daylight and an output of 850 lux at 2m. The LED Unit’s dimming facility enables you to control light

intensity, in addition to Paglight’s spot and flood capability. Rotatable Accessory Kit This accessory ring holds any combination of snap-in accessories, including barn doors (tapered or parallel), dichroic filters that correct the colour temperature of the output, and a diffuser. The accessory ring is expanded to fit over the front of the light, can be rotated 360° to achieve the desired configuration, and then tightened to maintain its position. Softlight Diffuser & Filter Kit This kit includes a filter holding assembly that fits onto the barn doors of any Standard or Mini Paglight (including Paglight C6). It enables you to attach a supersoft light diffuser screen or colour correction filters.

Paglight Power Bases Low-profile, hot-shoe Power Bases enable the Paglight to be easily and quickly mounted to the camera, or removed after shooting. Power Bases are available with a choice of connector, such as PP90, D-Tap and XLR4. Various lead lengths are available, suitable for use with most cameras. The base allows the Paglight to be mounted to the camera via a variety of mounting options suitable for all Paglights, including an extender arm and a camera clamp (see Page 28).

Standard Paglight (12V) LED

Paglight LED (D-Tap/150mm)

LED

Paglight LED (PP90)

LED

Paglight LED (D-Tap/500mm)

• LED Dimmer unit • LED Dimmer unit • LED Dimmer unit • Hot-shoe Power Base with a D-Tap connector • Hot-shoe Power Base with a PP90 connector • Hot-shoe Power Base with a D-Tap connector (lead length 500mm) for use with light output (lead length 500mm) for use with the light (lead length 150mm) for use with light output on a PAGlok Connector output on an Anton-Bauer battery mount on Sony cameras • Stud Adaptor & Shoe Plate • Stud Adaptor & Shoe Plate • Stud Adaptor & Shoe Plate

Model 9966LD

Model 9964LD

LED

Model 9965LD

HAL

Lighting

Paglight LED (XLR4)

LED Accessory Kit

Paglight Softstart (D-Tap/500mm)

• LED Dimmer unit • Hot-shoe Power Base with an XLR4 connector (lead length 1.5m) for use with XLR4 output on camera or Pagbelt NMH • Stud Adaptor & Shoe Plate

• • • •

• Softstart halogen lamp holder suitable for use with Li-Ion batteries • Hot-shoe Power Base with a D-Tap connector (lead length 500mm) for use with the light output on an Anton Bauer battery mount • 20W or 35W lamps required • Stud Adaptor & Shoe Plate

LED to halogen conversion filter Diffuser 2 x parallel barn doors 360° Rotatable accessory ring

Model 9959D

Model 9956LD

Model 9945

HAL

Paglight Softstart (PP90)

HAL

Paglight Standard (D-Tap/150mm)

• Softstart halogen lamp holder suitable for use • Standard halogen lamp holder (Sony camera with Li-Ion batteries has Softstart function for use with Li-Ion • Hot-shoe Power Base with a PP90 connector batteries) (lead length 500mm) for use with the light • Hot-shoe Power Base with a D-Tap connector output on a PAGlok Connector (lead length 150mm) for use with the light • 20W or 35W lamps required output on Sony cameras • Stud Adaptor & Shoe Plate • 20W or 35W lamps required • Stud Adaptor & Shoe Plate Model 9944

HAL

Paglight Standard (D-Tap/500mm) • Standard halogen lamp holder suitable for use with Ni-MH or Ni-Cd batteries • Hot-shoe Power Base with a D-Tap connector (lead length 500mm) for use with the light output on an Anton Bauer battery mount • Stud Adaptor & Shoe Plate

Model 9965

Model 9966

Standard Paglight (12V) HAL

HAL

Paglight Standard (PP90)

Paglight Standard (XLR4)

• Standard halogen lamp holder suitable for use with Ni-MH or Ni-Cd batteries • Hot-shoe Power Base with a PP90 connector (lead length 500mm) for use with the light output on a PAGlok Connector • Stud Adaptor & Shoe Plate

• Standard halogen lamp holder suitable for • PowerMax halogen lamp holder that provides use with Ni-MH or Ni-Cd batteries voltage regulation for longer battery run-time, • Hot-shoe Power Base with an XLR4 connector and a dimming facility (lead length 1.5m) for use with the XLR4 • Suitable for use with Ni-MH or Ni-Cd batteries output on a Pagbelt NMH • Hot-shoe Power Base with a PP90 connector • Stud Adaptor & Shoe Plate (lead length 500mm) for use with the light output on a PAGlok Connector Model 9956 • Stud Adaptor & Shoe Plate

Model 9964

Paglight PowerMax (PP90)

Model 9946

HAL

Lighting

HAL

Paglight PowerMax (D-Tap/500mm)

Paglight PowerMax (XLR4)

Halogen Accessory Kit

• PowerMax halogen lamp holder that provides voltage regulation for longer battery run-time and a dimming facility • Suitable for use with Ni-MH or Ni-Cd batteries • Hot-shoe Power Base with a D-Tap connector (lead length 500mm) for use with the light output on an Anton Bauer battery mount • Stud Adaptor & Shoe Plate

• PowerMax halogen lamp holder that provides voltage regulation for longer battery run-time and a dimming facility • Suitable for use with Ni-MH or Ni-Cd batteries • Hot-shoe Power Base with an XLR4 connector (lead length 1.5m) for use with the XLR4 output on a Pagbelt NMH • Stud Adaptor & Shoe Plate

• • • •

Model 9948

Model 9947

Halogen to daylight conversion filter Diffuser Parallel barn doors 360° Rotatable accessory ring

Model 9959

Standard Paglight (12V) Accessories

9967 Arc Lamp 9998 LED Conversion Filter (LED to halogen)

9973 PowerArc Conversion Filter (PowerArc to halogen)

9951 Dichroic Filter (halogen to daylight)

9955 PowerArc

9952 Diffuser

9997D LED Dimmer Unit 9968 Lamp 9963 Tapered Barn Doors

9954 Parallel Barn Doors

12V Lamps

9953 Rotatable Accessory Holder

9930 20W 9958 PowerMax/VariLux

9912 50W 9950 Standard Lamp Holder 9932 75W

9911 100W

9938 Softstart 9957 PP90 Power Base (500mm)

Lighting

9983 Softlight Diffuser and Filter Kit for ultra-soft or colour lighting effects. Comprises: 2 x Filter holders 2 x Softlight diffusers 2 x Full CT blue filters 2 x Half CT blue filters 2 x Half CT orange filters (See price list for Model Nos. of individual parts).

9931 35W

9959 Rotatable Accessory Kit for halogen Paglights 9959D Rotatable Accessory Kit for LED Paglights

9960 XLR4 Power Base (1.5m) See Universal Mounting Options on Page 28 9961 D-Tap Power Base (500mm)

9962 D-Tap Power Base (150mm)

9987 Base Locking Adaptor

Registered Design No. 2071515, Patent No. 2335027

Power-to-light Adaptors Location Lighting Power Interface PAG Power-to-light Adaptors are a convenient, alternative way of powering and positioning an additional light source on location. The PTLA is a power interface that connects the 12V Standard Paglight to the battery. The battery acts as a stable support base for the Paglight and enables it to be positioned on any convenient flat surface, such as a table top or book shelf. Models are also available for use with the 12V Mini Paglight.

PAG PTLA (PAGlok)

PAG PTLA (V-Mount)

PAG PTLA (Snap-on)

• Power interface for a 12V Standard Paglight enabling it to be powered using a PAGlok battery

• Power interface for a 12V Standard Paglight enabling it to be powered using a V-Mount battery

• Power interface for a 12V Standard Paglight enabling it to be powered using a PAG Snapon or Anton Bauer battery

Model 9991

Model 9991V

Model 9992

• For 12V Mini Paglight

Model 9994

Model 9994V

Model 9995

Paglight Kits Incorporating Pagbelt NMH

Lighting

Complete On-Camera Lighting Kit Paglight Kits are designed to provide everything required for a professional lighting source that can be used either on or off camera.

Paglight Kit 12V 10Ah

Paglight Kit 13.2V 10Ah

• • • • •

Standard 12V Paglight XLR4 Power Base (length 1.5m) Standard halogen lamp holder A choice of 2 halogen lamps Rotatable Accessory Kit comprising: 1 dichroic filter, 1 diffuser and 2 parallel barn doors • 12V 10Ah Pagbelt NMH with integral overnight charger and a power lead suitable for country of use • Handle 1/4” Whit. bush/stud • Camera shoe plate and stud adaptor

• • • • •

Model 9875N

Model 9878N

Standard 12V Paglight XLR4 Power Base (length 1.5m) Standard halogen lamp holder A choice of 2 halogen lamps Rotatable Accessory Kit comprising: 1 dichroic filter, 1 diffuser and 2 parallel barn doors • 13.2V 10Ah Pagbelt NMH with integral overnight charger and a power lead suitable for country of use • Handle 1/4” Whit. bush/stud • Camera shoe plate and stud adaptor

Halogen Light Source The Paglight is supplied with a standard halogen lamp holder and a choice of two bi-pin halogen lamps (20W, 35W, 50W, 75W or 100W). The light is fitted with the halogen rotatable accessory kit. A handle is included for off-camera use. A stud adaptor and a camera shoe plate are included for mounting the light to the camera. Ni-MH Battery Belt The XLR4 Power Base enables the Paglight to be powered from the Pagbelt NMH battery belt supplied. The 10Ah Ni-MH power source, available in 12V or 13.2V formats, ideal for powering lights of up to 100W. The Pagbelt incorporates an integral overnight charger. Flight Case The kit is supplied in a compact, impact resistant flight case for convenience and protection.

Paglight Kits PowerArc & LED Field Kits HMI or LED Lighting Kit There are two Paglight Field Kits, one that incorporates the PAG PowerArc HMI unit, and one that incorporates the PAG LED Dimmer Unit. Each kit includes two standard halogen units, enabling you to take full advantage of the unique plug-in lamp holder system that makes Paglight the industry’s most versatile camera light. Converting the Paglight from halogen to Arc or LED takes a matter of seconds.

Paglight PowerArc Field Kit

Paglight LED Field Kit

• Standard 12V Paglight • Choice of Power Base (PP90, D-Tap 150mm or 500mm, or XLR4) • 2 standard halogen lamp holders • A choice of 2 halogen lamps • PowerArc Unit, arc lamp and protector • Rotatable Accessory Kit comprising: 1 dichroic filter, 1 diffuser and 2 parallel barn doors • Tapered barn doors (pair) • PowerArc to halogen conversion filter • Handle 1/4” Whit. bush / stud • Camera Clamp 1/4” Whit. bush • Camera shoe plate and stud adaptor • Fitted Flight Case • 468 x 386 x 109mm / 3kg

• Standard 12V Paglight • Choice of Power Base (PP90, D-Tap 150mm or 500mm, or XLR4) • 2 standard halogen lamp holders • A choice of 2 halogen lamps • LED Dimmer Unit and protector • Rotatable Accessory Kit comprising: 1 dichroic filter, 1 diffuser and 2 parallel barn doors • Tapered barn doors (pair) • LED to halogen conversion filter • Handle 1/4” Whit. bush / stud • Camera Clamp 1/4” Whit. bush • Camera shoe plate and stud adaptor • Fitted Flight Case • 468 x 386 x 109mm / 3kg

Model 9825

Model 9825L

Tailored to Your Needs The kit is tailored to your requirements with a choice of Power Base, suitable for the light ouput on most cameras (PP90, D-Tap or XLR4), and a choice of two halogen lamps (20W, 35W, 50W, 75W or 100W). The light is fitted with a halogen rotatable accessory kit. A dichroic filter that converts the light output to match halogen is included for use with the PowerArc and the LED unit. A stud adaptor and a camera shoe plate are included for mounting the light to the camera. A handle is included dor handheld use. A Camera Clamp is included for mounting the Paglight to a camera handle.

Mini Paglight (12V) Top-light for handheld camcorders • Broadcast quality 12V miniature camera light • Soft, clean output, no hotspots • Plug-in Softstart lamp holder for use with Li-Ion batteries • Plug-in PowerArc HMI for high-power daylight output • Fully-focusable from spot to flood • Cool-running patented design • Detachable hot-shoe Power Base with choice of connector • Power from 12V to 14.8V battery packs or belts • Ultra-compact and lightweight

Lighting

9008 Accessory Holder (ring only) 9021 Lamp Protector

9011 Barn Doors (pair)

9025 PowerArc Lamp

9022 PowerArc 12V Lamps

9018 12V 10W 9009 Dichroic Filter 9023 PowerArc Conversion Filter

9016 Standard Lamp Holder

9010 Diffuser

9014 D-Tap Power Base (500mm)

9015 D-Tap Power Base (150mm)

9019 12V 20W

9007 Rotatable Accessory Kit

9012 PP90 Power Base (500mm), 9986 (1.5m)

9017 Softstart Lamp Holder

9020 12V 35W

9013 XLR-4 Power Base (1.5m)

Mini Paglight PP90

Mini Paglight D-Tap/500mm

Mini Paglight XLR4

Accessory Kit

• Standard halogen lamp holder • Hot-shoe Power Base with a PP90 connector (lead length 1.5m) for use with the light output on a PAGlok Connector • Stud Adaptor & Shoe Plate

• Standard halogen lamp holder • Hot-shoe Power Base with a D-Tap connector (lead length 500mm) for use with a D-Tap light output • Stud Adaptor & Shoe Plate

• Standard halogen lamp holder • Hot-shoe Power Base with an XLR4 connector (lead length 1.5m) for use with the light output on a Pagbelt NMH • Stud Adaptor & Shoe Plate

• Halogen to daylight conversion filter • Diffuser • Parallel barn doors • 360° Rotatable accessory ring

Model 9001L

Model 9003

Model 9002

Model 9007

Paglight C6 Low-cost lighting kit for handheld camcorders • Miniature 6V broadcast quality halogen camera light • Soft, even output, no hotspots • Plug-in lamp holder makes lamp changing quick and easy • Daylight filter, diffuser and barn doors included • Supplied with 20W halogen lamp (10W and 30W also available) • Cool-running patented design • 6V 8Ah Ni-MH battery powers the light for 2 hrs 45 mins • Battery fully charged in 3 to 4 hrs from fully-discharged • 6V charger with AC adaptor for country of use

Lighting

1019 Barn Door

Short Extender Arm 6V Lamps

1014 Diffuser 1013 Dichroic Filter

1010 10W

• Mounts to the camera’s accessory shoe and allows the Paglight C6 plus one other accessory to be mounted

1011 20W

Model 1020

1009 Lamp Holder & Lamp Protector 1016 Accessory Ring

Accessory Bracket 1012 30W

9972 Camera Shoe Plate See Mounting Options (all Paglights) on Page 28

Model 1021

Paglight C6 Kit

C6 PowerPack

C6 Power Charger

• 6V Paglight C6 camera light • Plug-in lamp holder and 20W lamp • 360° Rotatable accessory ring, daylight filter, diffuser and barn doors • PAG C6 PowerPack (6V 8Ah Ni-MH) including a detachable shoulder strap • PAG Power Charger with detachable plug of choice (UK, Euro, US/Japan, Australia) • Camera Shoe Plate

• 6V 8Ah rechargeable Ni-MH C6 PowerPack • Provides 2 hrs 45 mins continuous run-time with 20W lamp • Can be charged in 3 to 4 hours using PAG C6 Power Charger • Includes shoulder strap

• Charges C6 PowerPacks in 3 to 4 hours • Requires AC input connection plug (UK, Euro, US/Japan or Australia)

Model 1008H

Model 1004

Model 1001

Model 1002 • UK AC plug for C6 Power Charger • Euro AC plug for C6 Power Charger

Belt Clip

Model 1003

• Alternative to the shoulder strap provided with the C6 PowerPack • Mounts to the rear of the battery and enables it to be worn on a trouser belt

• US/Japan AC plug for C6 Power Charger

Model 1022

• Mounts to the 1/4" Whit. bush on the base of the camera and allows Paglight C6 plus one other accessory to be mounted

Model 1005 • Australia AC plug for C6 Power Charger

Model 1006

Paglight 250W Handheld location lighting • Compact and portable 250W ‘basher’ • Use handheld or stand-mounted on location • 24V and 30V models available • Soft, clean output, no hotspots • Fully-focusable from spot to flood • Plug-in lamp holder makes lamp changing quick, easy and safe • Designed to maximise heat dissipation • Detachable Power Base • Fully positionable, multi-directional mounting • Power from 24V or 30V Ni-MH battery belts • Ultra-compact and lightweight • Multiple mounting options available

• • • • • • • •

Hot-shoe power base with XLR4 connector (lead length 1.5m) Plug-in 24V halogen lamp holder Accessory ring, diffuser, halogen to daylight filter, parallel barn doors 2 x 250W lamps Handle 24V 10Ah Pagbelt NMH incorporating integral overnight charger AC power lead for country of use Fitted flight case

Lighting

Paglight 250W Kits Incorporating Pagbelt NMH

Model 9042N • Plug-in 30V halogen lamp holder • 30V 10Ah Pagbelt NMH incorporating integral overnight charger • AC power lead for country of use

Model 9044N

Paglight 250W 24V

Paglight 250W 30V

Rotatable Accessory Kit

• Halogen lamp holder for use with 24V 250W lamp Model 9913 • Hot-shoe Power Base with XLR4 connector (lead length 1.5m) for use with XLR4 output on Pagbelt NMH battery belts • 60mm dia. reflector • Stud Adaptor & Shoe Plate

• Halogen lamp holder for use with 30V 250W lamp Model 9914 • Hot-shoe Power Base with XLR4 connector (lead length 1.5m) for use with XLR4 output on Pagbelt NMH battery belts • 60mm dia. reflector • Stud Adaptor & Shoe Plate

• • • •

Model 9031

Model 9032

Halogen to daylight conversion filter Diffuser 2 x parallel barn doors 360° Rotatable accessory ring

Model 9033

Paglight 250W Accessories 9033 Rotatable Accessory Kit: Ring, Diffuser, Dichroic and Parallel Barn Doors

9038 Tapered Barn Doors (pair)

9037 Parallel Barn Doors (pair)

9040 30V Lamp Holder and Protector 9914 30V 250W lamp

9036 Diffuser

9039 24V Lamp Holder and Protector

9035 Dichroic Filter 9034 Accessory Holder

9913 24V 250W lamp

9960 XLR-4 Power Base (1.5m) See Mounting Options (all Paglights) below

Lighting

Mounting Options (All Paglights) These useful accessories enable any Paglight to be mounted to any camera, tripod, lighting rig or gaff grip

Paglight Extender Arm

Camera Clamp

Paglight Handle

Mounting Adaptor Kit

• Enables you to position the camera light to the side of the subject or away from the microphone to avoid casting a shadow • Includes fittings for mounting to a camera shoe or a camera bush

• Enables you to clamp the Paglight to the handle of the camera • Mounts to the Paglight via its 1/4” Whit. bush and stud adaptor Model 9971 (not included)

• For handheld use • Incorporates a 1/4” Whit. stud and a 1/4” Whit. bush • Length 127mm

• Comprises 9971, 9974, 9975, 9976 & 9977

Model 9978

Model 9906

Model 9807

Model 9990

Stud Adaptor male to male 1/4” Whit.

Camera Shoe Plate 1/4” Whit.

Thread Adaptor 3/8” dia. to 1/4” Whit.

Spigot Pin 1/2” dia. to 1/4” Whit.

Multi-Configuration Spigot Adaptor: 5/8", 1/2" and 1/4” dia. in-line or 90° conversion

Spigot Adaptor 1/2” dia. to 1/4” Whit.

Spigot Pin 5/8” dia. to 1/4” Whit.

Model 9971

Model 9972

Model 9974

Model 9975

Model 9977

Model 9985

Model 9976

PAG Orbitor Advanced Camera Support • A balanced and stable shooting platform for handheld camcorders and DSLRs • Reduces fatigue on long shoots • The camera feels weightless and control is effortless • It enables a wide range of professional shooting techniques • Pan tilt and roll with 3 axis control • Shoot at right-angles to your body • Quick-release camera plate compatible with Manfrotto tripod • Telescopic suspension rod supports the camera from beneath and helps absorb camera shake • Fully adjustable • Quick and simple set-up • Tough, lightweight construction

Professional Accessories Wireless receivers, remote controls and viewing monitors can be easily clamped to the Orbitor’s rigid but lightweight structure.

Camera Supports

Camera Power Accessories In place of the counterbalance weight on the Orbitor back plate a variety of camera power options can be mounted, including: • V-Mount Connector Model 9522/78V • PAGlok Connector Model 9522/78 • C6 PowerPack Model 1008H The camera may require a DC Adaptor, See 7.2V Power Solutions on Page 30.

PAG V-Mount Connector for Orbitor Back Plate Model 9522/78V

PAGlok Connector for Orbitor Back Plate Model 9522/78

PAG Orbitor

PAG X1A

PAG X1A Conversion Kit

• A two-handed assembly, that provides 3-axis control, and added support for extended shooting • The camera mounting plate is compatible with the Manfrotto tripod • 1/4” Whit. camera mounting • Maximum weight supported 4.5kg • Belt fits waists up to 46" • Total weight 3.9kg

• Economical, single-handed support, with pan and tilt facility, for use with smaller, lighter cameras • The camera mounting plate is compatible with the Manfrotto tripod • 1/4” Whit. camera mounting • Total weight 3.1kg

• Converts the PAG X1A into a PAG Orbitor advanced camera support

Model 2003

Model 2001

Model 2002

7.2V Power Solutions

Power Solutions for 7.2V to 8.4V Camcorders & DSLRs

Broadcast Power for Handheld Camcorders and DSLR Cameras

PAG Down-Converter Leads for use with Pagbelt NMH

PAG has developed a series of products that enable you to power 7.2V to 8.4V cameras using a range of PAG batteries including higher voltage PAG L95e broadcast packs and Pagbelt NMH belts.

These DC Adaptor leads connect to the camcorder in the same way as the PP90 model, but incorporate an XLR4 connector that enables you to power the camera from a 12V, 13.2V or 14.4V Pagbelt NMH battery belt, worn around your waist.

There are three types of PAG DC Adaptor available. They allow you to power the camera using either: • 12V to 14.8V V-Mount or PAGlok batteries • 12V to 14.4V PAG battery belts • The 6V battery supplied as part of the Paglight C6 kit

PAG Down-Converter Leads for use with V-Mount or PAGlok Batteries The DC Adaptor plugs into the battery port of the camcorder, and into the PP90 power port of a PAGlok or PAG V-Mount Connector (see Page 31). These professional battery mounts can be worn on a trouser waistband or belt, or fitted to the back plate of a PAG Orbitor camera stabiliser.

PAG Down-Converter Mounts for use with PAGlok or V-Mount Batteries PAG offers a battery mount that incorporates a built-in DC Adaptor for certain camcorders. These mounts can be fitted to the rear of the camcorder. They feature a PP90 output socket that can be used to power a 12V Mini Paglight or other 12V accessories.

Down-Converter Leads for use with broadcast batteries Model

Camcorder

9680/01

Canon XF305, EOS 7D

Connector PP90

9680/02

Sony DSR 200

PP90

9680/03

Sony PD150, PD170, A1E

PP90

9680/04

Panasonic DVX100, HVX200

PP90

9680/05

Sony Z1, Z5, Z7

PP90

9680/06

Canon EOS 5D MKII

PP90

PAG Up-Converter Leads for use with the C6 Battery

Battery Mounts for use with 9680/-

These DC Adaptor leads are aimed at camcorder users who don’t already own 12V batteries and chargers, and who are looking for an economic, all-in-one camera power and lighting solution. The Paglight C6 Kit contains a professional quality on-board 6V halogen light, a 6V 8Ah Ni-MH battery, and a designated charger (see Page 26). The appropriate DC Adaptor will boost the 6V output of the C6 battery to power the 7.2V to 8.4V camera, providing extended run-time. The same battery can be used to simultaneously power the 6V Paglight C6. The DC Adaptor attaches to the camcorder via the battery port. If you purchase an additional C6 PowerPack with your Paglight C6 Kit, you will be able to run your camcorder and camera light for twice as long, without stopping to charge a battery.

9522/60V

PAG V-Mount Belt Clip

9522/78

PAGlok Connector for Orbitor Back Plate

9522/78V

PAG V-Mount Connector for Orbitor Back Plate

9522/60

PAGlok Belt Clip

Down-Converter Mounts for use with broadcast batteries 9522/75

PAGlok Connector for JVC HD100

9522/77

PAGlok Connector Canon XL-H1

Down-Converter Leads for use with 12V to 14.4V Pagbelt NMH Model

Camcorder

Connector

9655/01

Canon XF305, EOS 7D

XLR4

9655/02

Sony DSR 200

XLR4

9655/03

Sony PD150, PD170, A1E

XLR4

9655/04

Panasonic DVX100, HVX200

XLR4

9655/05

Sony Z1, Z5, Z7

XLR4

9655/06

Canon EOS 5D MKII

XLR4

Up-Converter Leads for use with 6V C6 PowerPack Model

Camcorder

Connector

1023/01

Canon XF305, EOS 7D

1023/02

Sony DSR 200

1023/03

Sony PD150, PD170, A1E

1023/04

Panasonic DVX100, HVX200

1023/05

Sony Z1, Z5, Z7

1023/06

Canon EOS 5D MKII

ADAPTORS

PAG Battery Mounts and Mount Adaptors

Battery Mounts

Belt-Mounted Battery Mounts

Battery Mount Adaptors

The PAGlok Connector was one of the broadcast industry’s earliest battery mounting systems. A PAGlok Connector can be provided for virtually any broadcast equipment power application. Now that Sony’s V-Mount system has been widely adopted, PAG provides its own version of the V-Mount battery connector for use with a wide range of cameras and equipment.

Belt-mounted battery mounts are a convenient way of carrying two batteries (PAGlok or VMount) to provide off-camera power for a range of applications. Output is via an XLR-4 socket. The batteries’ voltages and capacities are not connected in any way and power is not continuous.

Adaptors that provide compatibility between the Anton-Bauer and PAG systems have always been available from PAG.

PAG V-Mount Connector

PAGlok Connector

V-Mount Belt Clip

• Provides a secure mechanical and electrical connection between the battery and the camera/equipment • Camera specific • PP90 or D-Tap output socket

• Provides a secure mechanical and electrical connection between the battery and the camera/equipment • Camera specific • PP90 output socket

• Clips onto your trouser belt • 2 x PP90 output sockets for powering a camera light and a 7.2V camcorder via a down-converter lead

Model 9522/-V

Model 9522/-

PAGlok Belt Clip

Belt-Mounted V-Mount Connectors

Belt-Mounted PAGlok Connectors

• Clips onto your trouser belt • 2 x PP90 output sockets for powering a camera light and a 7.2V camcorder via a down-converter lead

• Use any V-Mount battery to power camera accessories independent of camera battery • Replacement battery conveniently placed • Two full-size PAG V-Mount Connectors • Adjustable, lightweight belt with quick release buckle • Single XLR4 output

• Use any PAGlok battery to power camera accessories independent of camera battery • Replacement battery conveniently placed • Two full-size PAGlok Connectors • Adjustable, lightweight belt with quick release buckle • Single XLR4 output

Model 9523V

Model 9523

Model 9522/60V

Battery Mounts & Adaptors

Model 9522/60

PAG now provides adaptors that allow compatibility between Sony and PAG products, including PAG Snap-on compatible batteries.

PAG Battery Mount Adaptors

V-Mount to PAGlok Adaptor

PAGlok to V-Mount Adaptor

Snap-on to PAGlok Adaptor

• Adapts the Sony V-Mount for use with all PAGlok batteries

• Adapts the PAGlok Connector for use with V-Mount batteries

• Adapts the Anton-Bauer Snap-on camera mount for use with PAGlok batteries

Model 9522/64

Model 9512

Model 9518

PAG Battery Mount Adaptors

PAGlok to Snap-on Adaptor

Snap-on to V-Mount Adaptor

V-Mount to Snap-on Adaptor

• Adapts the PAGlok connector for use with Snap-on batteries

• Adapts the Anton-Bauer Snap-on camera mount for use with V-Mount batteries

• Adapts the Sony V-Mount connector for use with Snap-on batteries

Model 9517

Model 9510

Model 9511

PAG Dual Battery Mounts for All Systems • Combine the capacities of two L95e batteries

Battery Mount Adaptors

• Create a 190Wh power source that can handle a high current draw of up to 10A • Use Power Plate to convert your battery mounting system, if required • Travel by air with 190Wh of power and comply with air transport regulations • Ensure that your high-definition set-up does not over-discharge the power source • The Power Plate and two L95e batteries weigh only 1.87kg, and are an ideal counterbalance for the lens • Maintain in-the-viewfinder capacity data • PP90 camera light output (9553 and 9553V)

Power Plate V-Mount to PAGlok

Power Plate PAGlok to PAGlok

• Accepts 2 V-Mount Batteries (L110, L95, L95e or ZL-50) • For camera with PAGlok Connector • 215 x 136 x 44mm / 0.39kg

• Accepts 2 PAGlok Batteries (L110, L95, L95e or ZL-50) • For camera with PAGlok Connector • 215 x 132 x 39mm / 0.39kg

Model 9551V

Model 9551

Power Plate V-Mount to Snap-on

Power Plate PAGlok to Snap-on

• Accepts 2 V-Mount Batteries (L110, L95, L95e or ZL-50) • For camera with Anton Bauer battery mount • 215 x 136 x 45mm / 0.41kg

• Accepts 2 PAGlok Batteries (L110, L95, L95e or ZL-50) • For camera with Anton Bauer battery mount • 215 x 132 x 40mm / 0.40kg

Model 9552V

Model 9552

Power Plate V-Mount to V-Mount

Power Plate PAGlok to V-Mount

• Accepts 2 V-Mount Batteries (L110, L95, L95e or ZL-50) • For camera with Sony V-Mount • PP90 DC output for camera light • 215 x 136 x 60mm / 0.43kg

• Accepts 2 PAGlok Batteries (L110, L95, L95e or ZL-50) • For camera with Sony V-Mount • PP90 DC output for camera light • 215 x 132 x 55mm / 0.42kg

Model 9553V

Model 9553

PAG Continuous Power Units

PAGlok Power Module

Series/Parallel Module

Series/Parallel Belt

• Supplies continuous power from two PAGlok batteries for editing equipment, remote cameras or microwave links • 12V to 14.8V output via XLR4 socket • A third power source, such as a Pagbelt, can be connected via the XLR4 input • Two Power Modules can be linked to provide seamless power from up to five power sources using connecting lead Model 9664 • Includes carrying strap • 135 x 115 x 55mm / 0.4kg

• Supplies continuous power from two PAGlok batteries for editing equipment, remote cameras or microwave links • 12V to 14.8V output via XLR4 socket • 7.2V output via connector of your choice • A third power source, such as a Pagbelt, can be connected via the XLR4 input • Two Power Modules can be linked to provide seamless power from up to five power sources using connecting lead Model 9664 • Includes carrying strap • 135 x 115 x 55mm / 0.4kg

• Connects two PAGlok batteries in series to produce an output voltage equal to the sum of the two batteries’ individual voltages (up to 30V), for applications such as powering lighting or microwave links • Connects two PAGlok batteries in parallel to produce a capacity equal to the sum of the two batteries’ individual capacities (up to 14Ah) for extended equipment run-time and continuous operation • Output via XLR4 socket

• Connects two PAGlok batteries in series to produce an output voltage equal to the sum of the two batteries’ individual voltages (up to 30V), for applications such as powering lighting or microwave links • Connects two V-Mount batteries in parallel to produce a capacity equal to the sum of the two batteries’ individual capacities (up to 14Ah) for extended equipment run-time and continuous operation • Output via XLR4 socket • Quick-release buckle

Model 9661 • Version, for use with PAG V-Mount batteries

Model 9663

Model 9661V

• Version, for use with PAG V-Mount batteries

Model 9581

Model 9527 • Version, for use with PAG V-Mount batteries

Model 9581V

• Version, for use with PAG V-Mount batteries

Model 9527V

Model 9663V

PAG Radio Mic Receiver Brackets

Left Side-Facing Kit

Right Side-Facing Kit

Dual Kit

9522/58 & 64 Kit

• For use with cameras fitted with the PAGlok connector (not included) • Enables the mounting of a radio microphone receiver

• For use with cameras fitted with the PAGlok connector (not included) • Enables the mounting of two radio microphone receivers

• For use with PAGlok to V-Mount Adaptors Models 9522/58 & 9522/64. • Enables the mounting of a radio microphone receiver

Model 9620

Model 9621

Model 9622

Model 9623

Continuous Power Units

PAGlok Power Module

Air Transportation

Air Transportation of Li-Ion Batteries

UN Testing The International Air Transport Association (IATA) in association with the International Civil Aviation Organisation (ICAO) and the United Nations (UN) set clearly defined rules regarding the air transportation of Li-Ion batteries. From January 1st 2009, the 50th Edition of the IATA Dangerous Goods regulations requires the independent testing of each type of Li-Ion battery, not just the individual cells, to ensure that the design and construction are compliant with the stringent regulations. This is a costly process for the manufacturer, but it should assure you, the customer, that the battery design is safe and of the highest possible professional standard. PAG Li-Ion batteries have been tested and certified to comply with United Nations Specification ST/SG/AC.10/11/Rev 4. Copies of the test reports can be obtained from PAG Ltd.

Air Transportation The IATA regulations also affect individuals carrying Li-Ion batteries on-board civil aircraft, and influence the way they are classified, labeled and packed when transported as air cargo or by road freight. Restrictions are imposed on batteries that have capacities greater than 100Wh.

• Li-Ion batteries that have capacities greater than 160Wh cannot be taken as hand luggage or checked-in under any circumstances. PAG recommends that customers also confirm with their carrier of choice, to determine any local rules and policies, before travelling. Your PAG Li-Ion batteries are fully protected against short-circuit and over-current. However, it is recommended that you make sure they are obviously safe and inspire confidence in the airport check-in staff: • Put tape over the contacts. • Place each battery in a plastic bag. • Pack batteries in your hand-luggage in a safe and secure manner. We advise that you carry a copy of the PAG Air Transportation Certificate supplied with each PAG PL96, L95 or L95e battery, or download a copy from the PAG website: http://www.paguk.com For more information regarding Travelling Safety with Batteries and Battery-Powered Devices, please see the following website:

PAG Ltd. hereby declares that PAG PL96, L95 and L95e Lithium-Ion batteries have a watt-hour rating of less than 100 watt-hours. This rating is in compliance with Section 2.3.5.9 of the 50th Edition of the IATA Dangerous Goods Regulations (2009).

Transport by Air Freight and Road Freight

The following information will assist you when travelling with or shipping Li-Ion batteries:

• Li-Ion batteries that have capacities of 100Wh or less can be shipped by air or road, without restriction, as long as they comply with Packing Instruction 965.

Transport by Commercial Airline / Personal Luggage • Check-in of Li-Ion batteries is not allowed unless the battery is attached to the camera or the equipment it powers • An individual may take on-board, in hand luggage, an unlimited number of Li-Ion batteries that have capacities of 100Wh or less.

• Li-Ion batteries that have capacities greater than 100Wh, but less than 160Wh, are restricted to 2 items per person, in hand luggage.

http://safetravel.dot.gov/whats_new_batteries.html

• Li-Ion batteries over 100Wh, when shipped by road or air, are classified as dangerous goods and subject to special packaging certification and approval from external specialists. The correct forms and packaging labels for shipping PAG Li-Ion batteries can be obtained from PAG Ltd. or downloaded from the PAG website.

PAG Warranty, Service & Support The PAG Warranty The PAG Warranty guarantees each product for a period of 18 months, unless otherwise stated. PAG L95 and L110 Time Batteries, PAG Chargers and 12V Paglights carry a 2 year warranty. Refer to the product Instruction Manual for full warranty terms and conditions.

Manufacturing Excellence ISO 9001:2008 is a standard that relates to quality management systems and is designed to help ensure that companies meet the needs of their customers. PAG is proud to have been certified to ISO 9001:2008 standard in recognition of the seriousness with which the company takes matters of quality control.

Service & Support

PAG maintains a worldwide network of Authorised Service Centres. These facilities have a wealth of specialist knowledge, which is the result of PAG’s 40 years of experience. Using PAG’s Authorised Service Centres is the only way to ensure the continuation of the quality standard for which you first chose PAG products. For servicing outside of the UK contact your nearest PAG Agent via the PAG website at www.paguk.com For servicing in the UK contact the PAG Service Department at the London headquarters, or email service@paguk.com

Warranty and Service

PAG provides full technical support throughout a product’s lifetime, which includes servicing, repairs and technical advice. The quality of this service is second-to-none because PAG is the concept originator, design authority and manufacturer of its products.

Recelling PAG batteries should only be recelled by PAG. A cell replacement by a company other than PAG degrades the build standard of the product and leaves you with a battery of dubious quality, and a potential safety concern. As an alternative to recelling your battery, PAG offers UK customers a 25% discount on the price of a new battery of equivalent or greater specification, including a full warranty.

Recycling PAG provides a recycling service for all of its expired batteries. Simply return your batteries by prior arrangement to your PAG Agent, or to PAG Ltd. London. This ensures that the materials involved in their manufacture are recovered for future use, where possible, or disposed of in accordance with the appropriate legislation.

Trademarks The following are trademarks of PAG Ltd: ‘PAG Professional Broadcast Equipment’ ‘PAGlink’ ‘Time Battery’ ‘Power & Time Display’ ‘Pagbelt’ ‘PAG ACS’ ‘PAG AR Series 2’ ‘PAG Pulsar’ ‘PAG Quasar’ ‘PAG Cube’ ‘PAG iPC’ ‘PAG Freelancer’ ‘PAG Power Plate’ ‘PAGlok Connector’ ‘Paglight’ ‘Softstart’ ‘PowerArc’ ‘PowerMax’ All third party trademarks are acknowledged as such.

PAG Ltd. retains the right to change the specifications contained herein without notice.

PAG Ltd. 565 Kingston Road Raynes Park London SW20 8SA United Kingdom

E sales@paguk.com T +44 (0)20 8543 3131 F +44 (0)20 8540 4116 www.paguk.com www.pagstore.com

PAG is a UK distributor for Angenieux, Cartoni, Tiffen, Transvideo & 16x9 Inc. ÂŠ 2011 PAG Ltd.