Vinten Radamec Catalog

Driving the future 2010 - 2011

Robotic Camera Control Systems

Contents

04 Why Automate 06 About Vinten Radamec 08 Fusion Technology and Innovation 10 11 12 13 14 15 16 17 18 19 20

02

Pan and Tilt Heads Features & Benefits Radamec 431 Autocam HS-102P Autocam HS-105P Autocam & Radamec NLD Fusion FHR-100 Fusion FH-100 Fusion FHR-120 Radamec 435H Autocam HS-2010 MED

Contents

22 Pedestals 23 Features & Benefits 24 Fusion FP-188 26 27 28 29 30

Height Drives Features & Benefits Fusion FBH-175 Fusion FPH-188 Autocam SE-500

32 33 34 35 36 38 39 40 41

Control Systems Features & Benefits Vinten Radamec HDVRC Fusion FCS-16 Vinten Radamec LCS CCU Control Radamec BCP Radamec SCP Autocam Multicontroller II

42 43 44 45 46 47 48 49 50 52

Virtual Tracking Features & Benefits Vision 250E Vector 430i Vector 750i Vector 950i VRI Box Vinten Radamec Quattro SE Free-D Virtual Reality Reference Table

54 System Diagram 56 Virtual Reality System Diagram 57 Fusion System Diagram 58 Service and Support 59 Index by Part Number

www.vintenradamec.com

Unrivalled expertise and versatility in the broadcast market Vinten Radamec is a leading provider of robotic camera support systems with an extensive range including robotic heads, pedestals and control systems suitable for a variety of applications including studio, outside broadcast and legislative broadcasts.

By combining continuous innovation and investment in R&D with high precision manufacturing, Vinten Radamec has become globally recognised as an industry leader and has completed over 700 installations worldwide.

Robotic Camera Control Systems

03

Why Automate?

Broadcast robotics are already providing cost effective solutions in a wide range of applications from simple one or two camera studios to complex networks utilising total robotic solutions for everything from news broadcasts to live sports action.

The increased capabilities and creative advantages of broadcast robotics are ensuring its rising dominance in studio camera support. More and more broadcasters are taking the decision to move into robotics to reap the obvious benefits:

“We need to maximise our resources while minimising manual operation of the equipment – but at the same time, we insist on providing our viewers with top quality and exciting programming. Vinten Radamec is helping us to achieve just that, especially in the case of live sports broadcasts, which demand fast and reliable operation. We have found that Vinten Radamec Fusion robotic systems are the best fit for all aspects of our operation – from payload and effective remote control to general ease of operation.”

Dominic Leung, Managing Director of Television & Content, PCCW

04

Why Automate?

High quality, repeatable on-air movement

Ability to position cameras in inaccessible areas

Each shot is stored and executed precisely, so directors and stations can maintain a unique look for each show, preserving the station or programme identity.

The camera can be placed in inaccessible or remote locations to provide interesting and unusual shots.

This provides access to areas of high security or scenes where an operator would otherwise disturb the subject.

“The Vinten [Radamec] solution is a completely integrated package. We’ve been waiting for this type of package for years.”

Paul Lacombe, President, Brainstorm America

www.vintenradamec.com

Dramatic reduction of production costs

Reduced complexity and increased flexibility

The use of broadcast robotics guarantees highly repeatable performance which dramatically reduces production costs.

Automating camera positioning and control releases operators to undertake more creative and fulfilling work without compromising production quality.

Overhead reductions are typically as much as 50%, achieving payback on the investment within three years or less.

The user interface is easy to use, and operators are able to learn the necessary skills within a few hours and can then concentrate on achieving perfect framing on every shot.

“We had no robotic experience; The operators picked it up, and in a day and a half of training they were using them. The control console is very simple, easy to learn.�

Dusty Granberry, Director of Broadcast Operations and Engineering, KEYE TV

Robotic Camera Control Systems

05

About Vinten Radamec

Vinten Radamec is an industry authority and global market leader in its field, creating broadcast robotics solutions which are equally applicable to studio, outside broadcast and legislative environments with a wide range including fixed heads and tracking pedestals and the flexibility to control virtual reality productions and remote locations.

The Home of Industry Leading Brands Autocam and Radamec

Fusion

Today

Vinten pioneered the use of broadcast robotics with the development of Microswift, the first four camera robotics system designed for the BBC in 1980. Then, with the acquisition of US manufacturer TSM (Autocam) in 1993 and the well-respected company Radamec Broadcast Robotics in 2003, the Vinten Radamec brand was born.

The launch of the highly acclaimed Fusion range in 2006 combined innovative design with engineering excellence to create state of the art robotic heads, pedestals and control systems, compatible with both the Autocam and Radamec ranges.

By combining the team’s wealth of expertise Vinten Radamec has produced a solution that offers backwards compatibility with future proof technology – offering an ideal solution for every broadcaster.

With a truly global customer support network and distribution infrastructure, and one of the most far-reaching development programmes in the industry, Vinten Radamec continues to grow the number of broadcast robotics users around the world and has over 700 installations worldwide.

“The Vinten Radamec robotics system has been a great asset for our local productions. The quality of service and product are unmatched. ” KSMQ president and CEO Marianne Potter

06

About Vinten Radamec

www.vintenradamec.com

Industry Partnerships Vinten Radamec is proud to have formed strong partnerships with leading manufacturers in its field to ensure every customer receives a comprehensive system that meets the creative and business challenges of the broadcast industry today.

Automation Playout Systems Vinten Radamec systems can be interfaced to any automated production environment including news and virtual studios, conference centres, parliaments and legislative buildings. The Vinten Radamec HDVRC control system provides a highly responsive solution through a single point of control which interfaces with all the popular automation systems including: + Grass Valley™ Ignite™ + Ross Video OverDrive + Sony’s ELC + Snell-Kahuna + Pebblebeach

Robotic Camera Control Systems

As it provides manual as well as robotic control the HDVRC ensures uninterrupted and continuous performance should the automation fail.

This allows each studio to maintain a single point of control for multiple devices.

Unique Interfaces and Camera Control

Virtual Studio and Graphics Providers

Vinten Radamec’s Fusion pan and tilt heads provide:

To ensure the delivery of complete and fully functional VR solutions, Vinten Radamec works closely with all the leading VR providers including:

+ Direct drive of all broadcast quality full servo digital lenses from Fujinon and Canon.

The Vinten Radamec HDVRC Control System also includes interfaces for device such as the:

+ + + + +

Brainstorm Crystal Vision Orad rtSoftware VizRT

+ Canon BU-45H and BU-50H weatherproof heads + Telemetrics PT-LWP-S3 pan and tilt camera + Telemetrics TeleGlide camera track system + Innovision

07

Fusion Technology and Innovation

Vinten Radamec continually strives to advance the possibilities of broadcast robotics.The combination of our unique design features provides an excellence in both camera support and control, delivering smooth and precise motion.

Targeting

Floor and Height Movement

Pan, Tilt, Zoom and Focus

+ Precise reference positioning across a wide range of floor finishes - ensures repeatability of movement

+ Robotic and manual capability flexibility for multi-purpose studios

+ Serial control of the lens drive operational flexibility, and automatic configuration for direct drive of all broadcast quality full servo digital lenses from Fujinon and Canon (a feature unique to Vinten Radamec)

+ Compact and unobtrusive L shaped floor target - ideal for 360° set designs where targets are clearly visible, or sets where floor space is limited

+ Vinten Perfect Balance - smooth and controllable camera balance + Differential wheel truck system maximises floor traction and ensures unrivalled shot stability when in motion

+ Vinten drag system – complete camera control at any level of movement

+ Adjustable bumper sensitivity and collision avoidance protection - safe operation in busy studios

08

Fusion Technology and Innovation

www.vintenradamec.com

Virtual Tracking

Control

+ Precision head processing module and state-of-the-art encoders counting one million positions per full revolution – provide tracking and control of all movements to ensure perfect image synchronisation between real and virtual elements

+ Touchscreen display – quick and precise selection of shots, which can be incorporated into timelines simplifying complex programmes

All Vinten Radamec systems are designed and manufactured at the company’s state-of-the-art facility in the UK, which is part of The Vitec Group plc.

+ Multi site control - one operator and multi-facility control of pedestals, heads and elevation units + SD/HDI signals and graphics capture consistent with HD signals on other broadcast equipment

Robotic Camera Control Systems

09

Pan and Tilt Heads

11 12 13 14 15 16 17 18 19 20

10

Features & Benefits Radamec 431 Autocam HS-102P Autocam HS-105P Autocam and Radamec NLD Fusion FHR-100 Fusion FH-100 Fusion FHR-120 Radamec 435H Autocam HS-2010 MED

Pan and Tilt Heads

www.vintenradamec.com

Pan and Tilt Heads

The Vinten Radamec range of robotic and manual heads has been designed to provide camera support solutions for a variety of applications including studios, OB and legislative broadcasts.

Pedestals

Providing responsive control, precise repeatability and smooth broadcast quality movement Vinten Radamec range of robotic and manual heads are compatible with all robotic and manual studio pedestals and height drives.

Height Drives Control Systems Virtual Tracking Reference

Robotic Camera Control Systems

11

Radamec 431 Remote Pan and Tilt Head Up to 15 kg (33 lbs)

Technical Specification Part Number Head Dimensions: Height Width Length Weight Maximum Payload Pan Range Maximum Speed - Pan/Tilt Minimum Speed - Pan/Tilt Repeatability Fixing Details

431-No PSU 195 mm / 7.69 " 160 mm / 6.29 " 170 mm / 6.69 " 6 kg / 13.2 lbs 15 kg / 33 lbs 355˚ Configurable up to 60°/ sec 0.1° / second

3 mins of arc 4 x M6 equally spaced on 84 mm diameter 4 x M6 equally spaced on 3.3 " diameter Tripod Adaptor Available Power Requirement +24 / 0 / -24 Volts DC / 200 Watts (from PSU) Memory Capacity 600 shots / 99 Link sequences Communications 4 ports, RS422 via PSU Control Input 32 pin connector, power and data signals Lens Control 2 x 10 pin connectors to RBS Outputs zoom and focus drives or the digital lens drive

The Radamec 431 pan and tilt head supports camera and lens packages up to 15 kg (33 lbs) and is designed to give high performance in situations where the pan and tilt head should be as unobtrusive as possible.

Agile performance and precise repeatability are combined with the ability to perform slow, smooth,movements during on-air conditions.

The head has been installed in many parliaments, legislatures and television studios around the world.

12

Pan and Tilt Heads

To simplify system installation the 431 head contains an internal control unit which is mounted on the inside of the head cover for easy access. This interfaces to the control panel through the power supply and controls shot storage, movement profiling and power for movements of pan, tilt, zoom and focus.

The head can be mounted on to standard tripods or can be inverted for wall or ceiling mounting.

Key Features and Benefits + 15 kg (33 lbs) payload + Compact size + Simple system configuration + Agile performance and precise repeatability + Ceiling, wall or tripod mounting + Unobtrusive operation + Low noise during movement + Can be controlled by the Vinten Radamec Control System

www.vintenradamec.com

Autocam HS-102P Remote Pan and Tilt Head

Technical Specification HS-102P

VR Option

Pan and Tilt Heads

Up to 16 kg (35.3 lbs)

AM-HS-102P AM-HS-102PE AM-HS-102-IT AM-HS-102-ITE 225 mm / 8.9 ” 371 mm / 14.6 ” 161.8 mm / 6.4 ” 7.7 kg / 17 lbs 16 kg / 35.3 lbs 359° ±179° 60 Arcseconds 180° / second 60° / second

Pedestals

Part Number HS-102 PE HS-102 IT HS-102 ITE Height Width Depth Weight Payload Angular Range (pan) Angular Range (tilt) Accuracy (Pan & Tilt) Angular Acceleration Angular Velocity (Max) Angular Velocity (Min) Power Supply Requirement Power Supply Consumption (Peak)

0.01° / second 100-240 VAC / 50-60 Hz 150W

Height Drives

Autocam HS-102IT For virtual studios there are factory fitted solutions available, providing real time digital electronic positioning of pan, tilt, zoom and focus to external graphic computers in the head described here.

Key Features and Benefits + Genuine broadcast quality movement, reliability and durability + Inverted mounting for suspended cameras + May be used with the native lens drive for Autocam heads for direct lens servo control + Can all be controlled by the Vinten Radamec Control System

Virtual Tracking

The extremely rigid mechanical design and high precision servo technology ensures the head provides broadcast quality smooth movement at all times, while still achieving outstanding acceleration working seamlessly with the Vinten Radamec Control System.

Autocam HS-102PE The head is also available in a weatherproof version, which will operate over an extended temperature range of -4°F to 122°F / -20˚C to +50˚C.

Control Systems

The Autocam HS-102P is a small profile versatile remote pan and tilt head that can be wall mounted, hung from a ceiling suspension bracket, or used with a tripod or pedestal.

It delivers high speed and accuracy in very tight spaces.

Reference

Robotic Camera Control Systems

13

Autocam HS-105P Remote Pan and Tilt Head

Technical Specification

Up to 34 kg (75 lbs)

VR Option

Part Number HS-105 P HS-105 PE HS-105 IT HS-105 ITE Height Width Depth Weight Payload Angular Range (pan) Angular Range (tilt) Accuracy (Pan & Tilt) Angular Acceleration Angular Velocity (Max) Angular Velocity (Min) Power Supply Requirement Power Supply Consumption (Peak)

The Autocam HS-105P is designed specifically for use with ENG size camera and lens configurations with a 34 kg (75 lbs) capacity.

The fast acceleration and angular velocity of the HS-105P lends itself to a variety of applications outside the studio environment, including parliamentary, or conference coverage.

The extremely rigid mechanical design and high precision servo technology ensures the head provides broadcast quality smooth movement at all times, while still achieving outstanding acceleration working seamlessly with the Vinten Radamec Control System.

14

Pan and Tilt Heads

Autocam HS-105PE The head is also available in a weatherproof version, which will operate over an extended temperature range of -4°F to 122°F / -20˚C to +50˚C.

AM-HS-105P V4058-0001 AM-HS-105-IT AM-HS-105-ITE 437 mm / 17.2 ” 367 mm / 14.4 ” 178 mm / 7 ” 17.2 kg / 38 lbs 34 kg / 75 lbs 359° 359° capable ±30° typical 90 Arcseconds 180° / second 180° / second 0.01° / second 100-240 VAC / 50-60 Hz 500W

Key Features and Benefits + Genuine broadcast quality movement, reliability and durability

Autocam HS-105IT For virtual studios there are factory fitted solutions available, providing real time digital electronic positioning of pan, tilt, zoom and focus to external graphic computers in the head described here.

+ Can be mounted or inverted for ceiling suspension

+ All may be used with the native lens drive for Autocam heads for direct lens servo control + Can all be controlled by the Vinten Radamec Control System

www.vintenradamec.com

Compatible with full servo broadcast Canon and Fujinon lenses

Technical Specification Part Number

Depends on head/lens configuration. Please contact your local Vinten Radamec team for details

Suitable for operation with current full servo broadcast Canon and Fujinon lenses

Pan and Tilt Heads

Autocam and Radamec NLD Native Lens Drives

Pedestals Height Drives

Key Features and Benefits + Fitted without lens bracket or any manual re-calibration

+ Easy to interchange lenses + Easy to maintain lenses

The Native Lens Drives communicate intelligently with the lens software, and enable operators to change lenses quickly and simply.

Lens calibration for zoom and focus control starts automatically at power up and takes less than a second for serial control or 40 seconds for analogue control. No further manual intervention is required.

Virtual Tracking

Native Lens Drive technology is incorporated into the design of all new Fusion range heads. The Vinten Radamec range of Native Lens Drives has been designed to support existing customers with Autocam and Radamec pan and tilt heads.

Incorporating A&C Ltd’s video lens control system, the Autocam and Radamec NLDs provide analogue and digital lens drive outputs for the control of modern full servo Superbox and ENG lenses through plug-in cables rather than a fitted lens bracket. The cables can be unplugged easily if the camera is required for use elsewhere, and then reconnected in seconds back in the studio.

Control Systems

Vinten Radamec Native Lens Drives recognise different lenses and communicate intelligently to the lens software, which in turn allows easy interchangeability of lenses and provides much greater freedom in the choice of lens and location.

The Autocam Native Lens Drive (AM NLD) is backwards compatible with all Autocam heads.

The two Radamec Native Lens Drives (431-ND and mHCU NLD) are compatible with the Radamec 431 and all Radamec heads with mini head control unit.

Reference

Robotic Camera Control Systems

15

Fusion FHR-100 Robotic only Head

Technical Specification Part Number Height Width Length Weight Maximum Payload Pan Range Maximum Speed - Pan/Tilt Minimum Speed - Pan/Tilt Repeatability Fixing Details

Up to 55 kg (121 lbs)

Tripod Adaptor Integral Power Supply Unit Maximum Power Peak Power Lens Control Outputs

The Fusion FHR-100 Robotic only head from Vinten Radamec has been designed for use as a standalone device or for seamless integration with the pedestal FP-188, integral height drive FPH-188 and the Bolt on Height Drive FBH-175, where manual capability is not likely to be required.

The head contains its own power supply unit, allowing for mains to be taken into the head, either from the pedestal, or directly from the studio supply.

The head is compatible with the Vinten Radamec Control System, and the Vinten Radamec Fusion Pedestal FP-188, the Integral Height Drive and the Fusion Bolt on Height Drive FBH-175.

V4088-0001 500 mm / 19.7 " 220 mm / 8.7 " 390 mm / 15.4 " 20 kg / 44 lbs 55 kg / 121 lbs 359˚ 60°/ sec 0.1° / second 3 mins of arc 4 x M6 equally spaced on 84 mm diameter 4 x M6 equally spaced on 3.3 " diameter Available Autoranging 110-240V AC 50/60 Hz 200 Watts EIC Type A connector Direct to Canon or Fujinon Digital Full Servo lenses via 9 pin connector to lens manufacturer standard

Key Features and Benefits + The most affordable broadcast quality on shot movement head

+ Direct drive of all broadcast quality full servo digital lenses from Fujinon and Canon + Additional mounting points for preview monitors to further improve on shot performance

The head has been developed by retaining the drive chain and electronic components from the FH-100 Fusion Head, by removing the manual drag and clutch mechanisms, allowing for a lighter head.

The straightforward robust mechanical design and electronics provide a low cost, flexible and accurate head, with head positioning repeatability of 180 Arcseconds. The integral lens drive has automatic configuration for directly driving any full servo digital Canon or Fujinon broadcast lens, further increasing the operational flexibility,

16

Pan and Tilt Heads

www.vintenradamec.com

Fusion FH-100 Robotic and Manual Head

Technical Specification

VR Option

V3979-0001 V4078-0003 520 mm / 20.4 " 225 mm / 8.9 " 404 mm / 15.9 " 24.5 kg / 49 lbs 55 kg / 121 lbs 359˚ Mechanical clutch, driven return to robotic Lubricated Film as per Vector 70 60°/ sec 0.1° / second

Pedestals

4 x M6 equally spaced on 84 mm diameter 4 x M6 equally spaced on 3.3 " diameter Available Autoranging 110-240V AC 50/60 Hz 200 Watts EIC Type A connector Direct to Canon or Fujinon Digital Full Servo lenses via 15 pin connector to lens manufacturer standard

Height Drives

Tripod Adaptor Integral Power Supply Unit Maximum Power Peak Power Lens Control Outputs

Pan and Tilt Heads

Up to 55 kg (121 lbs)

Part Number FH-100 VR Upgrade Part Number Height Width Length Weight Maximum Payload Pan Range Manual to Robotic Changeover Manual Drag System Maximum Speed - Pan/Tilt Minimum Speed - Pan/Tilt Fixing Details

Encoder Resolution Pan: 819,200 counts per 360˚ Tilt: 819,200 counts per 360˚

The Fusion head has a 55kg payload, and can be used in either manual or robotic mode.

The head contains its own power supply unit, allowing for mains to be taken into the head, either from the pedestal, or directly from the studio supply.

The data cabling is standard IT category 6.

The head is compatible with the Vinten Radamec Control System.

Key Features and Benefits + The only on shot performing manual and robotic pan and tilt head available in the market + Direct drive of all broadcast quality full servo digital lenses from Fujinon and Canon + Additional mounting points for preview monitors to further improve on shot performance + VR Upgrade available - VR data output in both robotic and manual modes

With a simple clutching mechanism the FH-100 Fusion Head regains robotic control by remotely driving the mechanical clutch.

Virtual Tracking

Continuing the manual and robotic capabilities of the Vinten Radamec range, the Fusion head utilises the award winning LF drag system used in the Vector 90 providing familiar drag performance for manual operators.

The integral lens drive has automatic configuration for directly driving any full servo digital Canon or Fujinon broadcast lens, increasing the operational flexibility further.

Control Systems

The Fusion FH-100 from Vinten Radamec has been designed for use as a standalone device or for seamless integration with the Fusion FP-188 robotic pedestal.

The straightforward robust mechanical design and leading edge electronics development provide the perfect combination for a high performance head, both in flexibility and in accuracy.

Reference

Robotic Camera Control Systems

17

Fusion FHR-120 Robotic only Head

NEW

Technical Specification

Up to 55 kg (121 lbs)

VR Option

The Fusion FHR-120 Robotic Only Head from Vinten Radamec has been designed for use as a standalone device or for seamless integration with Fusion Robotic and Manual Pedestals and the Bolt on Height Drive FBH-175 where manual capability is not likely to be required.

The Fusion head has a 55 kg (121 lbs) payload.

The straightforward robust mechanical design and leading edge electronics development provide the perfect combination for a high performance head, both in flexibility and in accuracy, with head positioning repeatability better than 100 Arcseconds.

The integral lens drive has automatic configuration for directly driving any full servo digital Canon or Fujinon broadcast lens, increasing the operational flexibility further.

The head contains its own power supply unit, allowing for mains to be taken into the head, either from the pedestal, or directly from the studio supply.

The FHR-120 is compatible with all Vinten Radamec Control Systems and Fusion Pedestals and available as the FHR-120VR for VR applications, combined with the Fusion Head Processing Module (HPM). The HPM communicates directly to high Resolution encoders in the head via an expansion port.

This 2D tracking solution can be combined with the FP-188 VR pedestal for full 3D virtual reality tracking.

18

Pan and Tilt Heads

Part Number FHR-120 V4030-0003 FHR-120VR V4036-0001 FHR-120VR Upgrade V4078-0001 Height 500 mm / 19.7 ” Width 220 mm / 8.7 ” Length 390 mm / 15.4 ” Weight 21 kg / 46.2 lbs Maximum Payload 55 kg / 121 lbs Pan Range 359° Maximum Speed 60°/ second - Pan/Tilt Minimum Speed 0.1˚ / second - Pan/Tilt Repeatability 3 mins of arc Fixing Details 4 x M6 equally spaced on 84mm / 3.3 " diameter Tripod Adaptor Available Integral Autoranging 110-240V AC Power Supply Unit 50/60 Hz Maximum Power 200 Watts - Peak Power IEC Type A connector Lens Control Direct to Canon or Fujinon Outputs Digital Full Servo lenses via 9 pin connector to lens manufacturer standard Encoder Resolution Pan: 2,360,000 counts per 360° Tilt: 2,357,280 counts per 180°

Key Features and Benefits + The most affordable broadcast quality on shot movement head

+ VR enabled with additional processing module

+ Direct drive of all broadcast quality full servo digital lenses from Fujinon and Canon + Contains its own power supply unit (autoranging 110-240V AC 50/60 Hz), allowing for mains to be taken into the head, either from the pedestal, or directly from the studio supply + Additional mounting points for preview monitors

www.vintenradamec.com

Radamec 435H Pan and Tilt Head

Technical Specification

Up to 70 kg (154 lbs)

435H-S-No PSU 355° ±40°

60°/ second - configurable 0.1˚ / second 3 mins of arc 70 kg / 154 lbs 38 kg / 83 lbs 43⁄8”x 16 Dia U.N.C. studs equi-spaced on 111.12 mm / 4.375 ” PC Dia Figures relate to both pan and tilt functions unless otherwise specified

Pan and Tilt Heads

Part Number Mechanical Travel - Pan Mechanical Travel - Tilt Maximum Speed Minimum Speed Repeatability Maximum Payload Weight of Head Fixing Details

Pedestals Height Drives

The electro-mechanical design ensures responsive control, precise repeatability and smooth broadcast quality movement. The 435H head has a unique system of electronic clutches enabling it to be converted to full manual control by just a simple flick of a switch. Adjustable fluid damping is provided as standard for both the pan and tilt axes to provide a traditional feel when used manually.

When returning to remote operation they both retain current position.

+ Instantly switchable manual control + Adjustable fluid damping + Inverted mounting for suspended cameras

+ VR - upgradable in the field + Broadcast quality movements in both manual and remote modes Virtual Tracking

The head provides a four bolt base fixing and easily mount onto all types of studio pedestals. The head can be inverted for installations requiring suspended cameras and track systems.

Key Features and Benefits

Control Systems

The Radamec 435H pan and tilt head is designed to support cameras, lenses and teleprompters. The 435H has a 70 kg (154 lbs) payload.

+ Can be controlled by the VRC control panel

Reference

Robotic Camera Control Systems

19

Autocam HS-2010 MED Pan and Tilt Head

Technical Specification

Up to 90 kg (199 lbs)

VR Option

The Autocam HS-2010MED includes an electronic drag system in the pan and tilt axes, providing smooth continuously variable drag over a wide range.

20

Pan and Tilt Heads

The extremely rigid mechanical design and high precision servo technology ensures the head provides broadcast quality smooth movement at all times, while still achieving outstanding acceleration working seamlessly with the Vinten Radamec Control System.

HS-2010 IT For virtual studios there are factory fitted solutions available, providing real time digital electronic positioning of pan, tilt, zoom and focus to external graphic computers in each of the heads described here.

Part Number HS-2010 MED HS-2010R IT Height Width Depth Weight Payload Angular Range (pan) Angular Range (tilt) Accuracy (Pan & Tilt) Angular Acceleration Angular Velocity (Max) Angular Velocity (Min) Power Supply Requirement Power Supply Consumption (Peak)

AM-HS-2010MED AM-HS-2010R-IT 444 mm / 17.5 ” 508 mm / 20 ” 241 mm / 9 ” 41 kg / 90 lbs 90 kg / 199 lbs 359° ±45° typical 90 Arcseconds 120° / second 60° / second 0.01° / second 100-240 VAC / 50-60 Hz 250W

Key Features and Benefits + Genuine broadcast quality movement + Range caters for all known broadcast camera configurations

+ May be used with the native lens drive for Autocam heads for direct lens servo control + Can all be controlled by the Vinten Radamec Control System

www.vintenradamec.com

Pan and Tilt Heads Pedestals Height Drives Control Systems

The Fusion FH-100 Robotic and Manual Head in use at Sky Italia.

Virtual Tracking Reference

Robotic Camera Control Systems

21

Pedestals

23 Features & Benefits 24 Fusion FP-188

22

Pedestals

www.vintenradamec.com

Pan and Tilt Heads

Installed in many major facilities throughout the USA, Europe and Asia Vinten Radamec's range of robotic pedestals are designed to effortlessly move a full studio camera configuration including prompters, and ensure shot repeatability and smooth execution of complex camera shots.

Pedestals Height Drives Control Systems Virtual Tracking Reference

Robotic Camera Control Systems

23

Fusion FP-188 NEW Robotic and Manual Pedestal

Technical Specification Part Number FP-188 FP-188VR Height Range

Up to 85 kg (187 lbs)

VR Option

On Shot Stroke Doorway Tracking Width Steering Ring Diameter Maximum Floor Speed Minimum Floor Speed Maximum Height Speed (On Shot) Manual Operation Power Consumption Peak Power Input Max Payload Repeatability X&Y= Z= X&Y=

V3952-0003 V4049-0003 660 mm - 1430 mm 26 ” - 56 ” 770 mm / 30 ” 800 mm / 32 ” 635 mm / 25 ” * 300 mm / 12 ” / second 25 mm / 1 ” / second 150 mm / 6 ” / second Yes 750W Auto ranging 110-240V AC 50/60 Hz 85 kg / 187 lbs

+/- 100mm +/- 5mm +/- 1.5° (after triangle test pattern) Degrees of freedom 3, X,Y,Z Degrees of freedom additional to pedestal but included in D1 serial packet: P, T, Z & F Resolution (X,Y,Z) = +/- <1mm *Smaller ring available please contact us

The NEW Fusion FP-188 Robotic and Manual Pedestal is the latest in the acclaimed range of Fusion pedestals from Vinten Radamec.

The FP-188 is capable of recognizing a new, compact ‘L’ shaped floor target that offers more precise reference positioning across a wider range of floor finishes. This floor target can also be incorporated into the floor design.

The unit’s generous payload of 85 kg /187 lbs is capable of supporting an expanded camera/prompter package including the talent-facing vanity monitor often attached to the head during HD production. New differential wheel trucks maximise floor traction to enhance Vinten Radamec’s already unmatched shot stability performance.

The quality of performance in manual or robotic mode allows a studio to be used as either fully robotic or fully manual, without compromising the operator’s familiarity with Vinten’s manual pedestals or the Radamec or Autocam robotic user interfaces.

24

Pan and Tilt Heads

The fully continuous steering capability is delivered through the column found on the Quartz pedestal in the Vinten manual studio range, allowing studio pedestal operators to be instantly familiar with the operating benefits of Perfect Balance.

With all the on shot characteristics you would expect, this robotic pedestal has a maximum height velocity of 150mm (6”) per second, and a maximum floor speed of 300mm (12”) per second.

The electronic units are housed in easy access modules in the base of the pedestal, allowing board and full pack swap out.

The FP-188 is compatible with all Vinten Radamec Control Systems and Fusion Heads.

To create a fully robotic 3D virtual reality tracking solution, the FP-188 is also available as the FP-188 VR equipped with replacement control and power boxes, which establishes communication to the Fusion Head Processing Module (HPM) fitted to the FHR-120 VR or FH-100 VR.

Key Features and Benefits + New differential wheel trucks maximise floor traction to maintain unmatched shot stability performance + Adjustable bumper sensitivity + Compact ‘L’ shaped floor targeting that offers more precise reference positioning across a wider range of floor finishes + Switchable robotic or manual mode - flexible system perfect for multifunctional studios + Perfect Balance and full manual studio pedestal stability and performance + VR and height only options available

www.vintenradamec.com

Pan and Tilt Heads Pedestals Height Drives Control Systems Virtual Tracking Reference

The Fusion FP-188 Robotic and Manual Pedestal in use at Sky Italia.

Robotic Camera Control Systems

25

Height Drives

27 28 29 30

26

Features & Benefits Fusion FBH-175 Fusion FPH-188 Autocam SE-500

Height Drives

www.vintenradamec.com

Pedestals

The unique Fusion FBH-175 Bolt on Height Drive provides robotic control of most lightweight Vinten and Sachtler manual pedestals without compromising the manual function of the pedestal. This combination provides an effective robotic camera support system able to deliver the best in high quality programming at an affordable price. It also allows for future scalability with the option to add other robotic systems in line with changing customer needs.

Pan and Tilt Heads

The Vinten Radamec range of height drive solutions provide the added dimension of pedestal height control to static robotic camera installations.

Height Drives Control Systems Virtual Tracking Reference

Robotic Camera Control Systems

27

Fusion FBH-175 Bolt on Height Drive

Technical Specification Part Number V4031-0001 Compatible with the following Pedestals Osprey Elite, Osprey Plus (single stage), Sachtler Combi Pedestal and Quartz Two Maximum Height 900 mm / 35.4 ” Travel Weight 6.75 kg / 14.9 lbs Maximum Payload 80 kg / 176 lbs Maximum ‘On Shot’ 800 mm / 31.5 “ Stroke Maximum Height 150 mm / 6 “ / second Speed (On Shot) Minimum Height 10 mm / 0.4 “ / second Speed (On Shot) Manual Operation Yes Disconnect Power Consumption 170W - Peak Integral Power Auto ranging 110-240V AC Supply Unit 50/60 Hz

Up to 80 kg (176 lbs)

The Fusion FBH-175 Bolt on Height Drive is designed for use with the manual pedestals from Vinten and Sachtler which do not have a fully skirted base, such as the Vinten Osprey Elite, the Sachtler Combi Pedestal and the Quartz Two.

The height drive has a maximum payload of 80 kg (176 lbs), and is designed to support the Vinten Radamec Fusion robotic heads and today's portable cameras, lenses and prompters.

Combining the bolt on height drive with the NEW Fusion Robotic Only head, the FHR-120, creates a very affordable high performance robotics solution using the best lightweight manual pedestals available from Vinten and Sachtler.

The smooth movement produced by the height drive matches the performance of the pedestal under full manual control, enabling on shot movement as well as high speed repositioning.

28

Height Drives

Key Features and Benefits + Significantly increases flexibility of studio applications at a very affordable price + Provides genuine broadcast quality on shot height movement to match the performance of the head + Works seamlessly with the Fusion pan and tilt heads + Controlled by the Vinten Radamec Control System

www.vintenradamec.com

Up to 85 kg (187 lbs)

Technical Specification V3952-0003 900 mm / 35.4 ” 765 mm / 30 “ 780 mm / 31 “ 635 mm / 25 “ 150 mm / 6 “ / second 130 kg / 286.6 lbs 85 kg / 187 lbs Yes 500W Auto ranging 110-240V AC 50/60 Hz

Pedestals

Part Number Maximum Height Travel ‘On Shot’ Stroke Doorway Tracking Width Steering Ring Diameter Maximum Height Speed (On Shot) Weight Maximum Payload Manual Operation Power Consumption - Peak Integral Power Supply Unit

Pan and Tilt Heads

Fusion FPH-188 Integral Height Drive Pedestal

Height Drives

The electronics are housed in easy access modules in the base of the pedestal, allowing board and full pack swap out.

The FPH-188 may also be upgraded to a fully robotic pedestal, the FP-188, through the local Vinten Radamec service centre.

The pedestal is compatible with all Vinten Radamec heads and control systems.

Key Features and Benefits + Payload and pricing to meet the needs of modern camera configurations + Full genuine broadcast quality on shot movement capability + Vinten performance in manual mode + Upgradeable to a full XY pedestal at local service centre + Compatible with the Vinten Radamec Control System

The fully continuous steering capability is delivered through the column found on the Quartz in the Vinten manual studio range, allowing studio pedestal operators to be instantly familiar with the operating benefits of perfect balance.

Virtual Tracking

The pedestal is a full manually operated pedestal with an integrated height drive.

With all the on shot characteristics you would expect the fully integral height drive pedestal has a maximum height velocity of 6" (150mm) per second.

Control Systems

The Vinten Radamec Fusion FPH-188 Integral Height Drive Pedestal has a maximum payload of 85 kg (187 lbs), designed to support the Vinten Radamec Fusion robotic heads and today’s cameras, lenses and prompters.

The pedestal stroke range is 30" (765mm), with full crab and steering capability in manual control.

Reference

Robotic Camera Control Systems

29

Autocam SE-500 Servo Elevation Unit

Technical Specification Part Number SE-500 with HS-102 Head SE-500 with HS-105 Head Weight Height Range - Minimum Height Range - Maximum Stroke Range Transit Doorway Width Maximum Payload Maximum Velocity

Up to 45 kg (100 lbs)

The Autocam SE-500 is designed for use with the Autocam HS-102P and HS-105P pan and tilt heads controlled from the Vinten Radamec Control System, providing a cost effective means of increasing studio flexibility.

30

Height Drives

The SE-500 allows the quick and easy positioning of the camera height to be achieved from the control desk and allows stored height positions to be recalled with pan, tilt, zoom and focus as required. Camera height (and subsequently lens height) may be adjusted through a 39 cm / 15.5” range allowing “eye-line" to be maintained for differing presenter or subject heights.

The SE-500’s small footprint makes this an ideal pedestal for smaller compact studios, allowing three or four of these systems to be positioned close together. Positional stability is maintained through rigid mechanical construction and lockable castors to minimize lateral movement. Repositioning is made easy by the addition of a steering ring.

AM-SE-500-102 AM-SE-500-105 33 kg / 72 lbs 890 mm / 35 ” 1283 mm / 50.5 ” 390 mm / 15.4 “ 680 mm / 27 “ 45 kg / 100 lbs 25 mm / 1 “ / second

Key Features and Benefits + Ideal for cost effective camera height repositioning

+ Small footprint is ideal for tight studio spaces

+ Can be used with the Vinten Radamec Control System with the Autocam HS-102 or HS-105 heads

www.vintenradamec.com

Pan and Tilt Heads Pedestals Height Drives Control Systems Virtual Tracking Reference

The Fusion FBH-175 Bolt on Height Drive in use at Sky Italia.

Robotic Camera Control Systems

31

Control Systems

33 34 35 36 38 39 40 41

32

Features & Benefits Vinten Radamec HDVRC Fusion FCS-16 Vinten Radamec LCS CCU Control Radamec BCP Radamec SCP Autocam Multicontroller II

Control Systems

www.vintenradamec.com

Pan and Tilt Heads

All axes of camera and lens movement can be created, stored and recalled via touchscreen and/or table top control devices.

Pedestals

The Vinten Radamec range of control systems allows the operator to achieve a multitude of moves, creating perfect shots on multiple cameras that can be both stored and recalled with ease.

Vinten Radamec control systems are available with a range of user interfaces, including manual control panels and touch screens.

Height Drives Control Systems Virtual Tracking Reference

Robotic Camera Control Systems

33

Vinten Radamec HDVRC Control System

Technical Specification Part Number

V4063-0001

No. of Controlled Devices Per Operator Up to 32 devices Per Studio More than 32 devices per EPI No. of Controllers 8 per Network No. of Shots stored 64,000 Input Devices TFT touchscreen, VRC Control Panel, Automation interface Signal inputs Composite, SD/HD – 1080i, (HDVRC only) SDI – 720p VRC Panel Options + With/without CCU + Single and dual joystick control All have GPI0 functionality and option to have the focus control on the right or left of the panel

The Vinten Radamec HDVRC Control System is an easy to use, easy to configure control solution that provides multi-user, multi-facility control of pedestals, heads and elevation units.

The HDVRC Control system is an easy to use, easy to configure control solution that provides your production flexibility.

The network architecture incorporates most of the Radamec and Autocam control systems features to provide multi-user, multi-facility control of robotic pedestals, heads and elevation units.

Microsoft Windows™ and real time OS technology provide the Vinten Radamec system with enhanced operational features that ensure compatibility with all current and many products from either the former Radamec or Autocam ranges as well as all of the new products from Vinten Radamec.

34

Control Systems

Utilising flexible Ethernet network architecture, the Windows based touchscreen user interface allows a single controller to be configured to control multiple devices within the same logic sub-network. If remote control is required, a dedicated network communication channel is needed with appropriate traffic policies enabled.

Multiple controllers can be added to the VRC network allowing operational flexibility. Operators can control any studios’ cameras, from any control room (subject to permission).

System interconnection is via industry standard TCP/IP, RS232 and RS422 protocols.

The Vinten Radamec Control System allows us to grow with you. It enables you to purchase equipment to suit current needs secure in the knowledge that the system is the heart of all future systems from Vinten Radamec, ensuring your system can be fully supported, upgraded with software or compatible with the new range of developments planned in the near future.

Key Features and Benefits + Controls Radamec, Autocam and the new Vinten Radamec products

+ Shot storage of all axes in easy onetouch operation

+ Creation of picture based running orders

+ Storage of programmable fade times + Long term disc storage of shots and pictures

+ Sequence mode allowing shots to be moved through in a single continuous movement + Uses external switcher + Video loop through + Supports SD/SDI and HD video signals and graphics capture consistent with HD signals on other broadcast equipment + Automation interface option + Optional CCU control

www.vintenradamec.com

Fusion FCS-16 Control System

Technical Specification Pan and Tilt Heads

No. of Controlled Devices Part Number FCS-16 V4035-0001 FCS-16 + CCU V4035-0002 Per Operator Up to 16 devices Per Studio More than 32 devices per EPI No. of Controllers 8 per Network No. of Shots stored 64,000 Touchscreen Built-in 10.4” colour CCU: Optional

Pedestals Height Drives

The Fusion FCS-16 Control System can be teamed directly with all companion Fusion range products. Combining the system with the Fusion FHR-120 Robotic only Head and the Fusion FBH-175 Bolt on Height Drive is one way to create a cost effective robotic camera support solution able to deliver the best in creative, high quality programming.

Robotic Camera Control Systems

+ Shot storage of all axes in an easy touch operation

+ Optional programmable fade times + Easily networked with Vinten Radamec HDVRC

+ Windows based 10.4” touchscreen + Multi-user, multi-facility control of robotic devices

The Fusion FCS-16 delivers a unique range of benefits – offering high end operational performance at a very affordable price.

Reference

The Fusion FCS-16 has also been designed for backward compatibility with Radamec and Autocam robotic equipment. This enables broadcasters to upgrade robotics on a gradual, extremely cost-effective basis without having to change an entire system in a single capital outlay.

The user interface is a Windows based 10.4” touchscreen that allows a single controller to be configured to control up to 16 cameras and/or full x-y pedestals from any number of locations - the operator can be in the next room or on the other side of the world.

Multiple controllers can be added to the network allowing further operational flexibility.

Operators can control any studios’ cameras, from any control room (subject to permission).

Key Features and Benefits

Virtual Tracking

Offering the enhanced functionality associated with the new Fusion range, the Fusion FCS-16 Control System has been designed as a compact solution that requires only similar space as its closest predecessor, the Shot Control Panel from Radamec.

The control system’s network architecture incorporates most of the Radamec and Autocam control systems features, offering multi-user, multi-facility control of robotic pedestals, heads and elevation units. Microsoft Windows™ and real time OS technology provide the Fusion FCS-16 with enhanced operational features that ensure compatibility with many products from the former Radamec and Autocam ranges in addition to all of the new Fusion products from Vinten Radamec.

Control Systems

The Fusion FCS-16 is a new concept in control systems and the first event to offer full robotic control for up to 16 cameras, via a built-in touch screen.

35

Vinten Radamec LCS Legislative Control System

The Vinten Radamec Legislative Control System (LCS) provides multi-user, multi-facility control of cameras, CCU controls and robotics devices, ensuring rapid, accurate shot acquisition required to televise parliamentary and legislative procedures.

The system is configured for a single control system and can be expanded to multiple control stations with multiple cameras, providing shot acquisition through joystick panel and touchscreen control. The LCS also provides interface links to additional facilities such as data tablet operation, touch screen systems, microphone systems, character generators and vision switchers.

The flexible and intuitive user interface is based on Windows XP, and the Graphics User Interface (GUI) provides the operator with up to date information on the available functions and status of the system, and each seat in the software seating plan is associated with multiple cameras, each with multiple shot capabilities. The operator assigns and prioritises a series of shot types

36

Control Systems

against each seat (or target) which is then recalled through touchscreen control. The system calculates the best quality shot available and pan and tilt heads associated to these shots will automatically move into position.

This intelligent system can also be used in manual or automated mode, to ensure the best available camera shot is taken to preview or switched to air. In manual mode the operator selects and controls single or multiple cameras via the external device, using the standard preset shot available. In automated mode, the standard cue table offers a priority camera selection on each pre-saved shot.

Shot selection can also be controlled via an external trigger such as a microphone switcher.

When a particular microphone is activated it can be used as a trigger for shot recall, from which the LCS calculates the camera shot type required and sends the shot to preview. This enables rapid shot selection which in turn allows the operator to concentrate on trimming the on-air cameras.

Technical Specification Hardware

PC Ethernet controlled 22â&#x20AC;? touchscreen, Windows operating system Interfaces Microphone, VCG, Vision switcher Serial/Ethernet Tally (preview & Tally) Back up Optional Presets Unlimited No. of Cameras Multiple, based on configuration User Interface Touchscreen, data tablet Mini Joystick Panel - Multiple camera control camera control joystick panel - Custom/user favourite button set up - CCU control (optional) - Serial or ethernet controlled - Target selection

Key Features and Benefits + Multi-user, multi-facility control of cameras, CCU controls and robotic devices + Modular, adaptable design for continuous upgrading of existing systems from small joystick panels through to 22â&#x20AC;? + Flexible and intuitive user interface + Simple and flexible touchscreen operation + Manual or automated shot selection + External trigger control

The LCS system can also be a drop in replacement to the existing DOS controlled systems, controlling existing heads via an Ethernet protocol interface supplied by Vinten Radamec, without any requirement to change remote heads, wiring or cameras.

www.vintenradamec.com

Legislative System Diagram Pan and Tilt Heads

Vinten Radamec Mini Joystick Panel Preview Monitor

Touchscreen

Pedestals

Power Supply Touchscreen

VGA

Height Drives

Vinten Radamec Legislative Control System Ethernet Hub Ethernet

Tally-14

Control Systems

Video Router EPI

Autocam HS-102 Power Supply

Expandable to 32 devices

Autocam HS-102 Power Supply

Autocam HS-102 Power Supply

Autocam HS-102 Power Supply

Autocam HS-102 Power Supply

Robotic Camera Control Systems

Autocam HS-102P Head

Autocam HS-102P Head

Autocam HS-102P Head

Autocam HS-102P Head

Autocam HS-102P Head

Reference

Autocam HS-102 Power Supply

Autocam HS-102P Head

Virtual Tracking

EPI Rocket Port

Autocam HS-102 Power Supply

Autocam HS-102P Head

37

Vinten Radamec CCU Camera Control Unit

The Vinten Radamec CCU is an enhancement to the existing VRC control system to adjust the CCU or scene settings for specific cameras.

Camera control functions are typically controlled remotely via the camera manufacturers’ CCU unit which is independent from the robotics. However, Vinten Radamec has added robotics and CCU functionality to its HDVRC control system to enable single operator control of both these functions.

This maintains both the quality and consistency of the pictures.

Technical Specification VRC CCU Interface V4079-0001 – single channel V4079-0003 – 3 channel V4079-0005 – 5 channel V4079-0002 – additional board Please contact Vinten Radamec for a list of cameras

Key Features and Benefits + Camera control of up to 5 cameras in one unit

+ Dual power supplies + Field upgradable to add channels + 2 methods of connection

Each unit has an interface to the camera which can be serial or Ethernet, dependent on the required inputs of the camera.

38

Control Systems

www.vintenradamec.com

Pan and Tilt Heads

Radamec BCP Basic Control Panel

Pedestals Height Drives

The three axis joystick controls pan, tilt and zoom and is proportional, which means that the speed of movement is increased as the joystick is deflected. The BCP automatically compensates the response of the joystick according to the current zoom angle of the lens. A separate rotary encoder controls focus.

This facility allows slow and smooth movements to be made during On-Air conditions.

+ Simple control of up to eight cameras + On-Air quality movement + 12 shot positions per head + On-Air camera indication + 19in x 3U desk or rack mountable + Runs up to 4 control stations + Controls any device with a miniHCU, including height drive and the Radamec 431

Robotic Camera Control Systems

170-518-0001 170-518-0002

39

Reference

Part Number BCP (Single Joystick Control) BCP (Dual Joystick Control)

Virtual Tracking

A rotary slide allows the operator to select the speed of transition between shots. The BCP is compatible with the complete range of Radamec pan and tilt heads. A dual joystick version is available where height drive control is required.

Key Features and Benefits

Control Systems

The Basic Control Panel (BCP) is capable of controlling up to eight pan and tilt heads and provides storage and recall of 12 shot positions per head.

The panel accepts external switcher inputs in order to provide an On-Air indicator for each head.

Radamec SCP Shot Control Panel

This Shot Control Panel (SCP) can control up to 8 Radamec pan and tilt heads and is designed for ease of operation during complex programming schedules.

The Shot Control Panel is equipped with a high-resolution, menu-driven and a touch screen display to enable system operation and provide status messaging. Incorporating a wide viewing angle and a logical panel layout, the result is an intuitive, simple to operate, remote camera system.

The 19in x 4U low-profile panel enables control of pan, tilt, and zoom via a single three-axis joystick. This control is proportional to the joystick deflection and the panel automatically compensates for current zoom angle of the lens. A separate rotary encoder controls focus.

The SCP incorporates a numeric keypad which allows the operator to program and recall up to 600 shots per camera by its uniquely assigned shot number.

Key Features and Benefits + Intuitive touch control interface (320x240 LCD) + Smooth on-air movement + 600 shot per camera storage and recall facility + Pre-programmable fade times for each shot + Fade times dynamically adjustable via manual fade bar + User friendly prompt messages and status reporting + Continuous or manual mode + Can be used with cue computer and data tablet system + Can accept external switcher inputs â&#x20AC;&#x2DC;on airâ&#x20AC;&#x2122; etc (as BCP) + Numeric keypad for easy short storage and recall + Can control any head with a miniHCU as well as the 431

Part Number

40

Control Systems

170-502-0001D5

www.vintenradamec.com

Pan and Tilt Heads

Autocam Multicontroller II Compact Control System

Pedestals Height Drives

This economical and compact controller recalls shots and repositions to a selected camera location in a smooth and coordinated movement with all axes arriving at the same time. Shot transition speed is determined by the operator.

Key Features and Benefits + Reliable and flexible control for multi camera applications + Straightforward operation allows instinctive control + Operational performance at an affordable price

Virtual Tracking

A three-function proportional rate joystick gives smooth manual positioning of the head.

Pan and tilt rates are contoured with the level of joystick movement determining the speed of camera motion. Rotation of the joystick controls the zoom, while a separate rotary knob controls the focus.

Reference

Part Number

Robotic Camera Control Systems

Control Systems

The Multicontroller II can control up to six pan and tilt heads from the Autocam range, storing up to 100 head and lens positions for each camera at any one time, a total of 600 in all pre shot sets.

AM-MULTICNTR-II

41

Virtual Tracking

43 44 45 46 47 48 49 50 52

42

Features & Benefits Vision 250E Vector 430i Vector 750i Vector 950i VRI Box Vinten Radamec Quattro SE Free-D Virtual Reality Reference Table

Virtual Tracking

www.vintenradamec.com

Pan and Tilt Heads

The unique combination of manual and robotic products in the Vinten Radamecâ&#x20AC;&#x2122;s Virtual Reality tracking range provides both 2D and 3D solutions for every application from sports coverage to virtual studios.

Pedestals

The new Fusion FP-188VR robotic pedestal feeds precision tracking data in real time to virtual studio applications which render the virtual studio graphics. The tracking data includes X/Y positioning and height data as well as the pan, tilt, zoom and focus parameters, allowing completely free movement of the camera within the studio space and offering maximum production flexibility. The integrated solution offers an unmatched return on investment: a single operator is required to operate all cameras and the same physical space can be utilised for multiple productions.

Height Drives Control Systems Virtual Tracking Reference

Robotic Camera Control Systems

43

Vision 250E Encoded Manual Head Up to 33 kg (73 lbs)

The Vision 250E combines a manually operated pan and tilt head with optical encoders, to provide precise real time digital electronic positioning of pan and tilt.

The Vision 250E tracking head provides the most complete link between an operator’s desired performance from a pan and tilt head and the accuracy demanded for virtual applications.

In addition the 250E retains the features of the Vision 250 such as the exceptional TF drag system, illuminated level bubble and back lit drag knobs and counterbalance positional display.

Vision 250IT The Vision 250IT uses the Vision 250E, but includes an encoder capture board which provides positional data to the virtual set computer via a switchable RS-232 or RS-422 port, this is compatible with most virtual studio systems currently in use.

Technical Specification Part Number Vision 250E Vision 250IT Vision 250IT Height Length Width Weight Tilt Range Capacity Range Pan Resolution Tilt Resolution Encoder Power Requirements

3793-3 3792-3C (Canon) 3792-3F (Fujinon) 184 mm / 7.2 ” 160 mm / 6.3 ” 300 mm / 11.8 “ 7.25 kg / 16 lbs ±90° 10 - 33 kg / 22 - 73 lbs 802,560 counts per 360° 307,200 counts per 180° 5 volts dc ± 10%

Key Features and Benefits + Precise, real time digital electronic positioning of pan and tilt

+ Exceptional TF Drag system + Illuminated level bubble and back lit drag knobs

+ Counterbalance positional display

The 250E is based on the award winning Vision 250 pan and tilt head, which uses a unique twin spring balancing mechanism, to provide infinitely adjustable perfect balance throughout the tilt range.

Providing encoders to the Vision 250 head enables genuine high-end production capability for more budget sensitive needs such as webcasting, small studio productions and other on-location applications.

44

Virtual Tracking

www.vintenradamec.com

Vision 430i NEW Encoded Manual Head

Technical Specification

VR Option

Pan and Tilt Heads

Up to 43 kg (94.8 lbs)

Pedestals

Part Number (Head only) V4089-0001 Height 200 mm / 7.9 ” Length 200 mm / 7.9 ” Width 285 mm / 11.2 “ Weight 12.1 kg / 26.7 lbs *including wedge adaptor & pan bar Capacity Range 10 - 43 kg / 22 - 94.8 lbs Tilt Range @ 37 kg / 86.1 lbs: ±90° @ 43 kg / 94.8 lbs: ±40° Pan Resolution 1,480,000 counts per 360° Tilt Resolution 1,480,000 counts per 360° Encoder Power 5 volts dc ± 10% Requirements Platform Adjustment +5.5 to -12.5 cm / +2.2 to -4.9 “ Pan Bar: Single telescopic Camera Fixing: EFP Quickfit Automatic Adaptor [3761-3] Levelling Bubble Illuminated Drag Knobs Backlit and calibrated Counterbalance Fully variable with digital readout Base fixing 4 bolt flat with Quickfix groove

Height Drives

Key Features and Benefits The encoded pan and tilt head incorporates a new Intelligence Module allowing semi automatic set-up and slide plate tracking.

When combined with the Vinten Radamec VRI box this provides precise real-time digital electronic positioning of pan and tilt to allow graphics to be placed perfectly into the live environment. The positional information is also displayed on a graphical user interface for ease of set up and calibration.

These features, combined with the functionality of the innovative Vector 430, make the Vector 430i an ideal choice for EFP camera set-ups where virtual reality is required – now or in the future.

+ Precise, real time digital electronic positioning of pan and tilt

+ Small, lightweight and high capacity + Robust, durable construction and extensive operational temperature range + New ergonomic balance adjuster + Illuminated controls for low-light situations + TF Drag

Virtual Tracking

The new counterbalance system at the core of the Vector 430 has been designed with performance and convenience at the forefront.

Its physical size is compact and lightweight make it simple to rig, convenient to transport and equally suited to studio and field environments.

Control Systems

The new Vector 430i features manually operated pan and tilt head functionality from Vinten and high resolution optical encoders to provide precise positional data for virtual and augmented reality applications in outside broadcast and studio environments.

Robotic Camera Control Systems

Reference

The precise counterbalance and large capacity range means that any camera configuration from a lightweight EFP combination right up to a mini box lens setup will balance perfectly, enabling complete control of the framing in any situation.

45

Vector 750i NEW Encoded Manual Head

Technical Specification Part Number Height Length Width Weight

Up to 75 kg (165.3 lbs)

VR Option

Capacity Range Tilt Range Pan Resolution Tilt Resolution

V4080-0001 255 mm / 10 ” 355 mm / 14 ” 350 mm / 13.5 “ 17.9 kg / 39.5 lbs (including wedge adaptor & pan bar) 75 kg / 165.3 lbs @ 75 kg / 165.3 lbs: ±52° 1.8 million counts per 360 degrees 1.6 million counts per 360 degrees 5V dc ±10%

Encoder Power Requirements Platform Adjustment +5.5 to -12.5 cm / +2.2 to -4.9 “ Pan Bar: Single telescopic Camera Fixing: Wedge Adaptor Levelling Bubble Illuminated Drag Knobs Backlit and calibrated Counterbalance Fully variable with digital readout Base fixing 4 bolt flat with Quickfix groove

The new Vector 750i is the first encoded pantographic head from Vinten, providing the perfect solution for virtual reality in both studio and outside broadcast for operators who love the feel of the Vector 750.

46

Virtual Tracking

The pan and tilt head incorporates a new Intelligence Module allowing semi automatic set-up, slide plate tracking and kinematic compensation. When the Vector 750i is combined with the Vinten Radamec VRI box these features provide the most precise positioning data possible from a pantographic head, to ensure stable and accurate placement of virtual graphics into the live environment.

The Vector 750i maintains all of the market leading functionality of the Vector 750, making this pan and tilt head an ideal choice for large camera combinations where virtual reality is required – now or in the future.

Key Features and Benefits + The market leading Vector 750 with virtual reality capability

+ Unprecedented positional accuracy for an encoded pantographic head + Unique slide plate and balance mechanism position measurement for mid-broadcast camera adjustments

www.vintenradamec.com

Up to 120 kg (264 lbs)

Technical Specification Part Number Height Length Width Weight Tilt Range Capacity Range Pan Resolution Tilt Resolution Encoder Power Requirements

V4056-0001 248 mm / 9.7 ” 225 mm / 8.8 ” 342 mm / 13.5 “ 16.7 kg / 36.8 lbs 60 kg / 132 lbs payload to ±90° 120 kg / 264 lbspayload to ±60° 16 - 120 kg / 35 - 264 lbs 1,800,000 per 360° 1,800,000 per 360° 5V dc ±10%

Pan and Tilt Heads

Vector 950i Encoded Manual Head

Pedestals Height Drives

The Vector 950i has been specifically designed to meet the exacting demands of camera operators working in virtual production with full facility studio and OB cameras, offering a high level of control with many unique features.

The Vector 950i is fitted with very high quality rotary optical incremental encoders in both the pan and tilt axis, and are accessed via a connector at the front of the head. Power to the encoders is 5V dc at 200mA maximum.

Key Features and Benefits + Precise, real-time digital electronic positioning of pan & tilt + TF drag offers enhanced control + Counterbalance readout for repeatable camera set up

Control Systems

The Vector 950i combines the award winning manually operated Vector 950 pan and tilt head with optical encoders to provide precise real-time digital electronic positioning.

Virtual Tracking Reference

Robotic Camera Control Systems

47

VRI Box Virtual Reality Interface

Technical Specification Part Number Power In Power Out Fixing I/O

Accessories

The VRI Virtual Reality Interface box utilises the full functionality of the Vector 430i, 750i and 950i pan and tilt heads as well as working with the “E” series encoded heads from Vinten Radamec in virtual reality applications.

48

Virtual Tracking

The VRI box processes the positional data from the head encoders (and auxiliary instruments in the “i” series heads) and also offers a direct interface to lenses with encoder outputs (or bolt on lens encoders) to provide a single data stream to the graphics rendering system.

The VRI can be configured to work the head mounted to a fixed mount (tripod, post etc) or to the Quattro SE tracking pedestal for full 6 axis tracking.

V4083-0001 110-250v AC or 9-28v DC, 80W 12v DC @ 1A / 24v DC @ 1A Std Vinten accessory mount bars, 25, 50, 75 or 100mm centres Genlock ( 1 in, 2 out) Devicelink.i (for i series Vinten heads) Quadrature Heads (for E series heads) Lens encoders (Quadrature) GUI (For laptop set-up and Pendant control, options for PDA) Jib (Quadrature input for elevation and azimuth on selected jibs) USB Ethernet X 2 (for connectivity to Quattro SE and maintenance) Vinten Inclinometer for perfect placement of OB graphics.

V4083-0003 PDA based GUI (for set-up and control) V4014-0002

Key Features and Benefits + Enables the use of the Vector 430i, 750i and 950i in virtual reality applications

+ Can be reconfigured with Quattro software to give X, Y, Z axis VR movement

Each VRI Box is supplied with mounting brackets, GUI, and head interface cable and be re-configured with the Quattro software to give X, Y, Z axis VR movement, as required.

www.vintenradamec.com

Up to 85 kg (187 lbs)

Technical Specification Part Number

Pan and Tilt Heads

Vinten Radamec Quattro SE Encoded Manual Pedestal

V3851-0001 * V3851-0002 ** 1498 mm / 58.9 ” 498 mm / 19.6 ” 136.35 kg / 300.6 lbs

Pedestals

Maximum Height Minimum Height Weight (Without Trim Weights) Maximum Payload 85 kg / 187 lbs On Shot Stroke 1000 mm / 39.4 “ Transit Doorway Width (With Small 74.5 cm / 29.3 “ Steering Ring) (With Large 82 cm / 32.3 “ Steering Ring) Ground Clearance 20 mm / 0.78 “ Cable Guards Single Point Action Repeatability X & Y +/- 70mm +/- 1° (triangle move) Degrees of Freedom 4 X, Y, Z & Base Orientation - Pedestal only Degrees of Freedom 4 (P, T, Z, and F) - additional to pedestal, but included in serial protocol output Resolution (X, Y, Z) ±<1mm Resolution ± 0.02° (Orientation) Position Protocol Available on request for VR system

Height Drives

* Americas, EMEA & Asia ** Japan

Building on the award winning Quattro S, the SE variant maintains all of the benefits of the ergonomically assisted lifting column, the small doorway width, and the on shot performance of any Vinten pedestal.

In keeping with Vinten Radamec’s aim to simplify virtual tracking solutions, the output from the pedestal is integrated with the Vision 250E, Vector 430i, Vector 750i and Vector 950i head and lens position feedback into a single data channel to the rendering system of a virtual software image generator.

To provide the tracking solution, high quality precision encoders have been integrated into the wheels and column. Also included is one electronics module, and base processor which deliver the accurate position data for all axes.

This combination with the head information provides precise real time digital electronic positioning over the floor and in elevation.

Key Features and Benefits + Best in class manual capability + Precise, real time digital electronic positioning of floor and height movement + PDA user interface simplifies set up in the virtual studio and provides positional feedback and calibration data

Virtual Tracking

The homing procedure has been simplified further for ease of operation, with flexibility on the direction and angle of approach, and a fast targeting option. A cable management system is incorporated into the pedestal, to prevent the cable being caught or tangled during repositioning.

The combination of simplified homing and set up procedures, precise digital electronic positioning and on shot performance ensure that the Quattro SE is an ideal solution for virtual studios around the world.

Reference

A PDA is included to provide the configuration and operator’s user interface, significantly simplifying the set up in the virtual studio. This is delivered through the latest calibration routines, head set up and optical axis offset input, whilst also providing the operator with enhanced functionality such as quick homing, and virtual set trimming.

Robotic Camera Control Systems

Control Systems

The Quattro SE is a lightweight and compact manually operated pedestal with built in encoders, making it perfect for today’s virtual studios.

49

Free-D 3D Camera Tracking System 8 axes of motion tracking

All virtual studio systems must know the precise position and orientation of each studio camera in order to render a virtual set from exactly the right viewpoint. Free-D is a unique camera tracking system that uses an advanced image analysis technique to measure the position of a camera.

As the system does not require any physical mechanical sensors, the camera can be used on traditional pedestals, operated handheld or mounted on a crane.

The Free-D system, uses a number of passive coded targets placed in the studio lighting grid. The targets are constantly illuminated and viewed by a small CCD camera mounted on the studio cameras. Each target is uniquely identified by a circular bar code and the use

50

Virtual Tracking

of narrow band LEDs and retro-reflective material ensures a sufficient number remain visible under normal studio lighting conditions.

The image from the tracking camera is processed by a Free-D unit to calculate the exact position and orientation of the studio camera. This is done by real time analysis of the image to identify each target. Knowing the physical location of the targets, Free-D calculates the position of the camera to a very high accuracy. The zoom and focus axes are monitored by high resolution optical sensors mounted on the lens. This data is combined with the video from the small camera CCD as ancillary data.

The Free-D processor then calculates the Pan, Tilt, Roll, X, Y, Height, Zoom and Focus parameters to accurately pin-point the studio camera position.

The complete data package is transmitted via a high speed serial data link to the 3D VR system. The protocol for this link is based on the Vinten Radamec Serial Position Interface protocol already supported by 3D virtual studio system suppliers.

Operations and Advantages + Measurement of the camera position to better than 1mm and orientation to 0.010˚ ensuring precise matching of the real and virtual worlds + Operation with a wide variety of camera supports including manual pedestals, cranes and even hand held cameras + Consistent smooth tracking even when moving between real and virtual areas in a studio + No in-vision pattern interfering with the chroma-key process, enabling shadow and reflection effects to be more easily created + No need for any additional sensing mechanisms to achieve consistent 360˚ tracking + Unrestricted movement of multiple cameras even in large studios, including full 360˚ pans + No restriction on depth of field of the studio lens, allowing normal lens aperture and studio lighting conditions + Virtual character insertion + Film set pre-visualisation via video-assist

Key Features and Benefits + 8 axes of motion tracking + Unlimited number of cameras + Multiple studios + Minimal daily set-up + Passive target infrastructure Principle Features + Pedestal, crane or handheld operation

+ Compatible with large, small and tall studios

+ Position resolution 1mm, orientation 0.010

+ Introduces only 1 frame of delay + Unrestricted movement of multiple cameras 360˚

www.vintenradamec.com

Pan and Tilt Heads Pedestals Height Drives Control Systems Virtual Tracking

The Vinten Radamec Quattro SE manual encoded pedestal in use at Ball State University.

Reference

Robotic Camera Control Systems

51

Virtual Reality Reference Table

Product

Pan Counts / 360°

Tilt Counts / 360°

Height Resolution

Vision 250E Encoded Manual Head

641,280

638,030

-

Vector 430i Encoded Manual Head

1,480,000*

1,480,000*

-

Vector 750i Encoded Manual Head

1,800,000*

1,600,000*

-

Vector 950i Encoded Manual Head

1,800,000*

1,800,000*

-

Fusion FHR-120VR Robotic only Head

1,800,000*

1,800,000*

-

Fusion FH-100VR Robotic and Manual Head

819,200*

819,200*

-

Autocam HS-102 IT Pan and Tilt Head

1,040,384

1,040,384

-

Autocam HS-105 IT Pan and Tilt Head

479,625

479,625

-

Autocam HS-2010 IT Pan and Tilt Head

2,097,152

2,097,152

-

Vinten Radamec Quattro SE Encoded Manual Pedestal

1mm

Fusion FP-188VR Robotic and Manual Pedestal

1mm

Free-D 3D Camera Tracking System

Equivalent >36,000

Equivalent >36,000

1mm

* These heads feature encoders which can be simply upgraded to higher counts if necessary. ◊ After 4 circuits of 6m x 4m triangle.

Colour shading indicates compatibility.

All heads supplied with four bolt fixing for compatibility with manual products.

52

Virtual Reality Reference Table

www.vintenradamec.com

Pan and Tilt Heads

Manual

-

Direct/Bolt on

-

Direct/Bolt on

-

Direct/Bolt on

-

Direct/Bolt on

-

Direct/Bolt on

-

Direct/Bolt on

-

Direct/Bolt on

-

Direct/Bolt on

-

Direct/Bolt on

Bolt on encoders

3D Tracking Device capable of reporting floor position in relation to a fixed point (a home or target) in X and Y coordinates, and height from the floor to top platform (Z axis). Devices can be paired with a 2D tracking product to give full freedom to move the camera within the virtual studio. The colour bands above highlight compatibility between 2D and 3D products.

Control Systems

2D Tracking Device capable of reporting pan and tilt, and lens zoom and focus positions.

In simple 2D tracking applications these devices are mounted on a static tripod or post. These devices can also be mounted on moveable supports including pedestals labelled “3D Tracking” above.

Height Drives

3D Tracking

< +/-70mm & +/- 1 degree ◊ < +/-100mm & +/- 1 degree ◊ < 10mm

Robotic

Pedestals

Lens Feedback

2D2D Tracking Tracking

Floor Accuracy

Virtual Tracking Reference

Robotic Camera Control Systems

53

Control Systems

System Diagram Autocam Multicontroller II

Autocam Series 200

Vinten Radamec HDVRC Supports SD/SDI & HD Page 34

Page 41

EPI

Heads

Autocam HS-102P

34 kg / 75 lbs Page 14 *×

Autocam HS-102IT 16 kg / 35.3lbs Page 13 *×

Autocam HS-2010 MED

Fusion FHR-100

90 kg / 199 lbs Page 20 *

55 kg / 121 lbs Page 16 **

55 kg / 121 lbs Page 18 **

Autocam HS-105IT

Autocam HS-2010IT

Fusion FH-100VR

Fusion FHR-120VR

34 kg / 75 lbs Page 14 *×

90 kg / 199 lbs Page 19 *

55 kg / 121 lbs Page 17 **

55 kg / 121 lbs Page 18 **

Fusion FPH-145

Fusion FPH-188

45 kg / 100 lbs Page 30

80 kg / 176 lbs Page 28

85 kg / 187 lbs

85 kg / 187 lbs Page 29

Autocam SP-2000

Fusion FP-188

145 kg / 320 lbs

85 kg / 187 lbs Page 24

Virtual Reality Pedestals System Diagram

Fusion FHR-120

55 kg / 121 lbs Page 17 **

Fusion FBH-175

Weights listed are maximum payloads

54

Fusion FH-100

Autocam SE500

Pedestals

Height Drives

Virtual Reality Heads

16 kg / 35.3 lbs Page 13 *×

Autocam HS-105P

Fusion FP-188VR 85 kg / 187 lbs Page 24

Key: * Native lens drive optional × Weatherproof version available ** Lens drive integrated

www.vintenradamec.com

Pan and Tilt Heads

Control Systems

Fusion FCS-16 Compact Control System Page 35

Radamec BCP

Radamec SCP

Page 39

Page 40

Radamec 431

Radamec 435H

15 kg / 33 lbs Page 12

70 kg / 154 lbs Page 19

Pedestals

EPI

Vision 750i

Vector 950i

33 kg / 73 lbs Page 44

43 kg / 95 lbs Page 45

75 kg / 165 lbs Page 46

120 kg / 264 lbs Page 47

Free-D System Page 50

Radamec 436VR 50 kg / 110 lbs

100 kg / 220 lbs

Page 50

Robotic Camera Control Systems

Reference

Free-D System

Virtual Reality Pedestals

Quattro SE 85 kg / 187 lbs Page 49

Virtual Tracking

130 kg/ 287 lbs

Pedestals

Radamec RP2a

Height Drives

Radamec UniPED

Control Systems

*

Height Drives

Vision 430i

Virtual Reality Heads

Vision 250E

*

Heads

*

55

Virtual Reality System Diagram Two Camera 3D Virtual Studio

Camera return from video switcher

FHR-120VR RS-232 REF RS-422

Camera 1

BB ref

Return

FP-188VR

Video Delay Unit

Video Router

Vision Mixer

In/Loop

Cam 1

FG 1

1

PGM

SDI 1/2

Cam 2

FG 2

2

Preview

Comp 1/2

PGM 1

Ref/Loop

PGM 2

I

GPI/Delay

5

N

Remote

6

6

7

7

8

8

Ref

RS232

O

PGM 1

3

U

4

4

I

T

5

5

N

Chroma Key Generator FG/Loop BG/Loop Matte

Video Delay Unit

Matt Out

In/Loop

Ref/Loop

SDI 1/2

Remote

1 2

X

3

6

4

7

5

-

-

-

FG+BG

A U

Ref

RS232

Comp 1/2 Ref/Loop GPI/Delay

CG-Render Engine

Remote

Fill Key SD1

Camera return from video switcher

SD1

Return

Live Video Sources from House Router

BB ref

Video In 1 Video In 2 Sync Audio

BB ref

Vector 950i RS-232 RS-422

Tracking Data

REF

KVM

LAN

SRC-8111 Tally Box

RS-422 RS-232

Camera 2

D1 Packet

3 x camera tally signals

Quattro SE

Button Box

Camera Cut

VR Software GP1 KVM

LAN

Key: SDI Component/Analogue Genlock Ethernet

56

Virtual Reality System Diagram

RS232/RS422 KVM Control Audio

www.vintenradamec.com

Pan and Tilt Heads

Fusion System Diagram

Mouse Keyboard Touchscreen

Operator Panel

Serial

USB

In/Out

Serial

Serial

USB/RJ45

Pedestals

FCS-16

Tally-14-VRC

HD-VRC-CSI

Height Drives

16 port Ethernet Hub Dual Fusion Interface

EPI Serial Interface Serial Power

USB RJ45/Serial

Control Systems

Single Fusion Interface Rocket Port V4050-0002 Lens Control Changeover To Radamec and Autocam heads and pedastals FH-100 + FP-188

FH-100

Camera 1

FHR-120

FHR-

Virtual Tracking

Camera 2

3574-3C Osprey Elite

V4030-0003 FHR-120 V4030-0003 or V3979-0001 FHR-120 or FH-100

Osprey Elite

V4031-001 FBH-175

FP-188

Reference

Robotic Camera Control Systems

57

Service and Support

Vinten Radamec designs and manufactures high quality broadcast robotic equipment and aims to provide an equally high level of support to ensure customers achieve the maximum benefit.

We offer dedicated local support Warranty and Support Contracts Vinten Radamecâ&#x20AC;&#x2122;s range of Warranty and Support Contracts is A Warranty and Support Contract tailored to meet customer needs. + A global distribution network allows Vinten Radamec to use the of dedicated dealers and Benefits include: range of technical talent at its distributors + Guaranteed response times disposal to provide a rapid, + Guaranteed spares deliveries responsive and effective means + A team of highly trained customer service personnel and of resolving operational problems, + Free preventative maintenance visits systems engineers based in the whenever and however often they occur. In addition, the Contract can + Free software upgrades US, Europe and Asia + Discounts on training provide for periodic checks on + Discounts on manual product + Warranty and support contracts systems for the prediction of, and support contracts protection against, the future designed to protect customer occurrence of these problems, investments Please discuss specific ensuring extended periods of requirements with your local trouble free operation.

Vinten Radamec team.

58

System and Support

www.vintenradamec.com

Index

Part Number

Product Name

170-502-0001D5 170-518-0001 170-518-0002 3792-3C 3792-3F 3793-3 431-No PSU 435H-S-No PSU AM-HS-102-IT AM-HS-102-ITE AM-HS-102P AM-HS-102PE AM-HS-105-IT AM-HS-105-ITE AM-HS-105P AM-HS-2010MED AM-HS-2010R-IT AM-MULTICNTR-II AM-SE-500-105 AM-SE-500-102

Radamec SCP Radamec BCP (Single Joystick Control) Radamec BCP (Dual Joystick Control) Vision 250IT (Canon) Vision 250IT (Fujinon) Vision 250E Radamec 431 Radamec 435H Autocam HS-102 IT Autocam HS-102 ITE Autocam HS-102 P Autocam HS-102 PE Autocam HS-105 IT Autocam HS-105 ITE Autocam HS-105 P Autocam HS-2010 MED Autocam HS-2010R IT Autocam Multicontroller II Autocam SE-500 with HS-105 Head Autocam SE-500 with HS-102 Head

Robotic Camera Control Systems

Page Number 40 39 39 44 44 44 12 19 13 13 13 13 14 14 14 20 20 41 30 30

Part Number

Product Name

Page Number

V3851-0001 V3851-0002 V3952-0003 V4089-0001 V4088-0001 V3979-0001 V4030-0003 V4031-0001 V4035-0001 V4035-0002 V4036-0001 V4049-0003 V3952-0003 V4056-0001 V4058-0001 V4063-0001 V4080-0001 V4079-0001 V4079-0003 V4079-0005 V4079-0002 V4083-0001

Quattro SE (Japan) Quattro SE (Americas, EMEA and Asia) Fusion FP-188 Vector 430i (Head only) Fusion FHR-100 Fusion FH-100 Fusion FHR-120 Fusion FBH-175 Fusion FCS-16 Fusion FCS-16 + CCU Fusion FHR-120 VR Fusion FP-188 VR Fusion FPH-188 Vector 950i Autocam HS-105 PE Vinten Radamec HDVRC Vector 750i CCU Control - single channel CCU Control - 3 channel CCU Control - 5 channel CCU Control - additional board VRI Box

49 49 24 45 16 17 18 28 35 35 18 24 29 47 14 34 46 38 38 38 38 48

59

Sales Offices China The Vitec Group plc China Rm 706, Tower B Derun Building YongAn Dongli A No 8 Jianwai Ave, Chaoyang District Beijing, China 100022 t +86 10 8528 8748 f +86 10 8528 8749

Japan Vinten Japan KK P.A. Bldg. 5F 3-12-6 Aobadai Meguro-ku Tokyo 153-0042 Japan t +81 3 5456 4155 f +81 3 5456 4156

France Vitec Group Videocom Division 171, Avenue des Grésillons 92635 GENNEVILLIERS Cedex France

Singapore Vitec Group Videocom Division 6 New Industrial Road #02-02 Hoe Huat Industrial Building Singapore 536199

t +33 820 821 336 f +33 825 826 181

t +65 6297 5776 f +65 6297 5778

Germany Vitec Group Videocom Division Gebäude 16 Planiger Straße 34 55543 Bad Kreuznach Germany t +49 671 / 483 43 30 f +49 671 / 483 43 50 Vitec Group Videocom Division Erfurter Straße 16 85386 Eching Germany t +49 89 / 321 58 200 f +49 89 / 321 58 227

United Kingdom Vitec Group Videocom Division William Vinten Building Western Way Bury St Edmunds Suffolk IP33 3TB UK t +44 1284 752 121 f +44 1284 750 560 Sales Fax +44 1284 757 929 USA Vitec Group Videocom Division 709 Executive Blvd Valley Cottage NY 10989 USA t +1 845 268 0100 f +1 845 268 0113 Toll Free Sales: 1 888 2 Vinten

info@vintenradamec.com www.vintenradamec.com

Vinten Radamec reserves the right to alter specifications or change materials where absolutely necessary. All sizes shown throughout this brochure are approximate and colours shown are as accurate as modern reproduction methods allow. No liability can be accepted for any variation. Specifications and features subject to change without notice. ®Vinten Radamec Broadcast Robotics, Vinten, Vision and Vector are registered trademarks of The Vitec Group plc ©2010 The Vitec Group plc Quality systems approved to ISO 9001:2000 Certificate No: Q09508 V2/10