Tips, articles, products, events and
Smart Approved WaterMark is Australia’s water conservation label. This allows businesses to purchase products that save water, and actively engage in the efficient use of water.
• Use 90% less water than traditional methods. • Use “superheated” dry steam to disinfect and clean, not buckets of dirty water. • Use hand controlled water trigger. No more flooding of floors.
• Jetsteam Maxi and Pro • Jetvac Junior • Duplex 280
• Duplex 340 and 340 Steam • Duplex 420 and 420 Steam • Duplex 620
+ 2|
BOOK A DEMO NOW
3|
Includes: • • •
Jetsteam Maxi with Jetsteam Trolley Flexible Mini Mop 10 microfibre pads
• • •
Duplex 340 with 2 extra black brushes Duplex Trolley Kit 3 Year Service Agreement
10x
10x 10x
Includes:
10x
Jetvac Junior, Thermoglide, 10 Microfibre Pads, 10 Microfibre Cloths, 10 Mop Heads, 10 Mop Head Thermoglide, July Kit , Flexible Mini Mop, and 3 year service agreement
4|
Includes:
Includes:
Duplex 420 with 2 extra black brushes, Duplex Trolley Kit, Aqua Tank and 3 Year Service Agreement
Duplex Cleaning Machines’ MURRAY MCDONALD advises on how to ensure a deep clean process, providing four key aspects to keep in mind. For most facilities cleaning is a priority. Money is invested, either contracted or in-house, for regular cleaning processes to ensure hygiene and cleanliness. However, cleaning on a regular basis doesn’t necessarily mean that a facility is getting a proper ‘deep clean’. The deep clean process involves the removal of inground, prolonged build-up of dirt and grime. This particularly includes hard to reach areas. Deep cleans aren’t carried out on a daily basis; however, in some sectors, such as the healthcare sector, deep cleaning is carried out regularly.
Key aspects of a deep clean and the processes involved include: • Having a regular deep cleaning program in place • Removing all permanent objects • Remembering the exterior of the facility, and knowing the high traffic paths
1. Have a regular deep cleaning program There is a specific process normally involved in a deep clean. These actions revolve around flushing, rinsing and scrubbing out soil and grime build-up. The level of soil build-up will determine the frequency at which a deep clean needs to occur. A quick way to identify the areas that require a regular deep clean is to locate the areas close to the sites where a mop is used. Although the mop and bucket approach is an ineffective cleaning method, it is still one of the most commonly used. The mopping method does not effectively clean, but merely ‘wipes’. This causes the grime and dirt that was thought to have been eliminated to be transferred to corners and hard to reach areas. These are the areas that require regular deep cleaning.
5|
2. Remove all permanent objects Most facilities don’t require a deep clean on a daily basis; therefore, the effort that is involved in this type of clean increases. One of the key actions to deep cleaning is to remove all objects that are normally fixed to the floor but can be moved. This includes objects such as desks, chairs, and large cabinets and shelves. Removing these objects will allow for greater access to areas that are not regularly cleaned. Although having objects on top of a floor’s surface ultimately protects the floor from becoming stained, the edges and corners around the object still obtain a build-up of dirt. In addition, dust and dirt easily accumulate underneath these fixed objects and sometimes removing them can be the only effective way to ensure cleanliness.
3. REMEMBER THE EXTERIOR Focusing on the exterior of a building as well as the interior is another part of the deep clean process. Environmental factors such as wind and rain can make an already unclean exterior of a facility even dirtier. The main focus of exterior cleaning is to identify spots and stains that have an impact spots and stains that have an impact on the presentation of the building. If it isn’t pleasing to the eye, it most likely should be removed during the deep clean process. These spots and stains include chewing gum wads, graffiti and litter.
4. KNOW THE HIGH TRAFFIC PATHS It is also important to look at the spaces immediately within the building, such as corridors and waiting rooms, as these are high traffic areas that regularly accumulate shoeprints and scuff marks.
6|
High traffic areas result in spots and stains that are difficult to remove, particularly when left for long periods of time. Liquid spills, such as tea, coffee and other drinks, that fall onto carpet fabric should be pre-sprayed to flush out and remove the contaminate. Once the spots and spills have been pre-sprayed, they then should be extracted through a flush and rinse, using water and agitation to the pile of the carpet. All chemical residues should be rinsed out of the carpet fibres and the carpet must be left to dry. Having matting will reducing in-ground soils and dirt from getting into the building and reduce the number of times the daily cleaning of these areas needs to occur. If daily cleaning is reduced, it will have a knock-on effect on deep cleaning processes. By following the right processes, not only will you spend less time on your daily cleaning routine, but you will also reduce the work required for a deep clean. Download Full Article
Owner of Bell Motor Inn, Kathy, tells Eco Steam Cleaning how going down a greener path has not only saved their business in hundreds of chemicals costs, but has also been a more convenient and faster way of removing mould.
Jetsteam Maxi
- Kathy, Bell Motor Inn
7|
Every month, Duplex will be bringing you instructional videos on the hospitality and accommodation industry’s most important cleaning processes.
Deep sanitising kitchen equipment
This month we have brought you demonstrations of: • Mattress Cleaning • Grout Cleaning
Grout Lines Cleaning
Accommodation Industry Mattress Cleaning
Research report conducted by the Department of Health (UK), 2007
8|
9|
BOOK A DEMO NOW
REQUEST A QUOTE NOW 10 |
If you have a Skype, or Facetime, simply let us know and we will organise an on the spot live, online product demonstration direct to your computer or smart phone.
BOOK DEMO
FAST FAX RESPONSE - AUSTRALIA WIDE 03 9482 4940 Organisation : ............................................................ State Full Name : ........................................................... Postcode Address : ........................................................... Telephone ........................................................... Email
: ............................................... : ................................................
Suburb
: ...............................................
: ...........................................................
Enquiry
: ............................................... : ...............................................
quat. Duisi. YES, I would like to arrange for a demonstration on : Oborperiurem ........................................................... Tatumsan esting eugiat adia-
YES, I would like to request a quotation on : .......................................................................... tie commodolor sectet nulla
feugue eu facip eros nostrud YES, I would like to request more information on : ................................................................ dolortie faccum zzriusto dio
11 |