APMEN JulAug 2012

July - Aug 2012

www.equipment-news.com

Hear Me Out Using Acoustics For Inspection

Grinding Out Results Software Programs Deliver In Cylindrical Grinding

Event Review:

Metaltech 2012 Executive Zone:

Mid Year Report

APMEN

Robots: Strong Arm Tactics Medical Manufacturing Asia

Visit Our Website

September 12 – 14, 2012 • Suntec, Singapore

Machining Intelligently with

ISCAR's New IQ Tool Lines!

ENQUIRY NO 121

www.iscar.com ISCAR JAPAN 1-5-3 Shinsenri-Higashimachi Toyonaka-shi, Osaka 560-0082 Tel + 81 6 835 5471 Fax + 81 6 835 5472 iscar@iscar.co.jp

ISCAR TAIWAN 395, Da Duen South Rd. Taichung 408 Tel +886 (0)4 247 31573 Fax +886 (0)4 247 31530 iscar.taiwan@msa.hinet.net

ISCAR THAILAND 57, 59, 61, 63 Soi Samanchan-Babos Sukhumvit Rd. Phra Khanong, Khlong Toey Bangkok 10110 Tel + 66 (2) 7136633 Fax + 66 (2) 7136632 iscar@iscarthailand.com

ISCAR VIETNAM (Representative Office) Room D 2.8, Etown Building, 364 Cong Hoa, Tan Binh Dist., Ho Chi Minh City, Tel + 84 8 8123 519/20 Fax + 84 8 8123 521 iscarvn@hcm.fpt.vn

CV MULTI TEKNIK Ruko Gsa Blcok B No. 8 BN-BP, Podomoro City JL.Letjen S.parman Kav.28 Jakarta Barat 11470 Indonesia Tel + 62 21 29206242/44/45/59 Fax + 62 21 29206243 multi@centrin.net.id

SINO TOOLING SYSTEM Blk 502, Jurong West Ave 1 #03-813 Singapore 640502 Tel + 65 6566 7668 Fax + 65 6567 7336 sinotool@singnet.com.sg

MESCO Reliance Corner Brixton St. Pasig City Metro-Manila Philippines Tel + 63 2631 1775 Fax + 63 2635 0276 mesco@mesco.com.ph

MACHINING DNA Minimaster速Plus

Square 6TM

NEW MINIMASTER速PLUS SYSTEM Setting a new level of precision and strength in modular endmills.

Below 15 microns radial runout. Maximum flexibility.

Turbo 10

Precision

Performance

Flexibility

NEW SMALL SQUARE 6TM MILL Small 6-edged, double sided inserts. Smooth cutting action.

A new level of performance and economy for small machines.

Efficiency

Strength

Reliability

NEW TURBO 10 MILL High performance square shoulder milling for all materials.

Machine it faster and consume less power than ever.

Singapore Tel + 65 68412802, Malaysia Tel + 60 3 90591833 Thailand Tel + 66 2 7467801, Vietnam Tel + 84 8 9144393 Indonesia Tel + 62 21 80888122, Philippines Tel +63 9 178298719

ENQUIRY NO 065

www.secotools.com

Contents July-August 2012

Cutting Edge 26 Vertical Support For Better Grinding

The development of synchronous support grinding allows high feed speeds for grinding delicate workpieces such as a crankshaft or camshaft. By Oliver Hagenlocher, EMAG

28

Grinding Out Results With Software

The IT experts of Fritz Studer have developed a grinding software which delivers results during cylindrical grinding and simultaneously reduces the processing time by approximately 25 percent. By Erhard Kämpf, Studer

Tech Talk 30

Robots Can Be For You Too

A common perception places robots in hightech futuristic assembly facilities. But the fact is that the usage of robots is applicable to traditional processes like welding and they can find a place in small job shops too.

By Joson Ng

34

Handling The Load

A robot loading system adds productivity to a machining centre. By Stefanie Senft, Kuka Robot

Software & Metrology 38 Streaming IT Solutions Into Factories

Incorporating a Manufacturing Execution System (MES) in factories can ease movement of data and production. By Natalia Tee

42

Maximising Availability For Better Productivity

Coupling shop management software with a tool-vending unit pushes productivity to a new level. By Raoul Rapke, IMC Group

44

Cloudy Issues Explained

Anubhav Saxena and Stanimira Koleva dispel some misconceptions on cloud computing. By Joson Ng 2

metalworking equipment news Jul-Aug 2012

Sheet Metalworking 48 46 Watch Sheet Metal Designs Unfold

Michael E Neumann takes a quick look at what is available in the market today for sheet metal designing.

From Design To Manufacturing

CAD technology for sheet metal allows the designing of sheet metal parts in an intuitive way, taking manufacturing constraints into account. By Samson Khaou, Dassault Systèmes Asia Pacific South

Best choice.

Speedy Sprinter BySprint Fiber 3015: Speedy laser cutting system with high-tech fiber laser for the economical processing of thin metal sheets.

Laser | Bending | Waterjet bystronic.com Best Choice.

We Support You. ENQUIRY NO 129

Hear Me Out Using Acoustics For Inspection

VOL. 26 NO. 5 JULY - AUGUST 2012

July-August 2012

ASIA PACIFIC METALWORKING EQUIPMENT NEWS

Contents

July - Aug 2012

www.equipment-news.com

Industry Focus 50

Software Programs Deliver In Cylindrical Grinding

Event Review:

Metaltech 2012 Executive Zone:

M.I.C.A. (P) No. 098/06/2012 • PPS 840/09/2012 (022818) • ISSN 0129 5519

Cover credit: Reis Robotics

Grinding Out Results Mid Year Report

APMEN

Robots: Strong Arm Tactics Medical Manufacturing Asia

Visit Our Website

September 12 – 14, 2012 • Suntec, Singapore

FC JulAug 2012 DMG-MS.indd 3

7/12/12 9:48 AM

Hear Me Out

The use of acoustics in non-destructive testing and inspection promises to yield faster, more accurate results.

By Shahnawaz Abdul Hamid

53

ASIA PACIFIC METALWORKING EQUIPMENT NEWS (M.E.N.) is published 8 issues per year by Eastern Trade Media Pte Ltd 1100 Lower Delta Road, EPL Building #02-05 Singapore 169206 Tel: (65) 6379 2888 Fax: (65) 6379 2806.

It is time to change that default setting on the CMMs as the influence of noncontact metrology sweep into the traditional realm of tactile measurement.

By Michael E Neumann

SUBSCRIPTION RATES: M.E.N. is available to readers on a per annum subscription basis depending on location: Singapore: S$60.00, Malaysia: S$60.00, Asia Pacific/ America/Europe/Others: S$100.00. Refer to the subscription card in each issue for further details. For change of address, please notify our Circulation Manager. For more subscription information Fax: (65) 6379 2806 Singapore E-mail: irenetow@epl.com.sg

Touch Free Is Now The Perfect Touch

54

IMPORTANT NOTICE THE CIRCULATION OF THIS MAGAZINE

Case Study: Arming The QC Department

IS AUDITED BY BPA WORLDWIDE. THE ADVERTISERS' ASSOCIATION RECOMMEND THAT ADVERTISERS

A Malaysian automobile producer brought in an extra pair of arms to improve their inspection process. Contributed by Emily Tay, Faro Asia-Pacific.

SHOULD PLACE THEIR ADVERTISEMENTS ONLY IN AUDITED PUBLICATIONS

INDUSTRY Endorsements

Executive Zone 56 Mid-Year Report

As we cross the halfway mark of the year, it is a good time to take stock of the happenings in the first six months of 2012. In this special APMEN feature, we catch up with leaders of the metalworking industry to see how their company fared and what their plans are for the rest of the year.

Features 60

Thailand’s Automotive Industry Controls Its Welding Equipment & Consumables Market

Rising eco consciousness could lower the demand for welding in the automotive industry.

By Krishnan Ramanathan, Frost & Sullivan

61

Making Parts Airworthy

Augustine Quek investigates the various production processes in aerospace part manufacturing.

Regulars

08 Business News 75 Product Finder 79 Exhibition Programmes 80A Product Enquiry Card 4

metalworking equipment news Jul-Aug 2012

SPETA

Singapore Precision Engineering and Tooling Association (SPETA)

Federation of Asian Die & Mould Associations (FADMA)

Events & Exhibition 64 • Adding Precise Value

Precision engineering can be developed in tandem with the rise of high growth industries, which has propelled the shift towards complex and high volume, low mix manufacturing. By Sherlyne Yong

• Event Review: Metaltech 2012 • Event Review: CIMES 2012 • Event Review: Hannover Messe 2012 • Event Preview: EuroBlech 2012 • Event Preview: JIMTOF 2012

80

Refer to Advertising Index

pg

For Advertiser's Enquiry Numbers

Federation of Malaysian Foundry & Engineering Industry Associations

Indian Machine Tool Manufacturing Association (IMTMA)

China Machine Tool & Tool Builders' Association (CMTBA)

Machine Tool Club (MTC)

Taiwan Association of Machinery Industry (TAMI)

ENQUIRY NO 036

editor’s

www.equipment-news.com

note

Published by:

Eastern Trade Media Pte Ltd (a fully owned subsidiary of Eastern Holdings Ltd)

Reg No: 199908196C

managing director Kenneth Tan editor Joson Ng

josonng@epl.com.sg

business development manager Randy Teo

randyteo@epl.com.sg

senior sales manager Derick Chia

derickchia@epl.com.sg

editorial assistant Sharifah Zainon sharifah@epl.com.sg

The world of robotics reaches far and wide in the manufacturing industry and its growing influence is here for all to see. At the recently concluded Automatica 2012 show held in Munich in May, some 31,000 visitors from more than 100 countries attended, according to the organiser. The figures released also revealed good economic conditions for automation technology.

Following growth of 35 percent in 2011, the VDMA Robotics and Automation expects further growth of four percent in the current year.

W hether complementa r y or competitive, there is no doubt the usage of robots is here to stay. For those in the metalworking industry who view the usage of robots as a complementary technology, they can point to stories where robots lend a hand in processes like welding or assist in the loading of parts.

For those who fear being replaced by robots one day, they can take heart that there are certain areas where human intervention is still required.

For example, in welding, robots are

not 100 percent effective in identifying gaps inside a welding part whereas a welder can see that and correct the part accordingly.

At the end of the day, the decision to adopt robots in a factory is made based on its merits. Whoever makes the business more money is always going to have a more compelling case. In this issue of Asia Pacific Metalworking Equipment News, we will bring you articles on robots and their applications in metalworking to help you decide what is best for your business.

Apart from robots, we also put the spotlight on NDT, an inspection technique used to evaluate the properties of a material, component or system without causing damage.

On the business front, we are glad to bring you our mid year report, where the bigwigs of the metalworking world come together and assess their companies’ performances for the first half of the year and how they will fare for the rest of 2012.

graphic designer Jef Pimentel jeffreypimentel@epl.com.sg circulation executive Irene Tow

irenetow@epl.com.sg

contributors Oliver Hagenlocher Erhard Kämpf Stefanie Senft Natalia Tee Michael E Neumann Shahnawaz Abdul Hamid Emily Tay Krishnan Ramanathan Augustine Quek Raoul Rapke Samson Khaou Sherlyne Yong board of consultants Wäinö A Kaarto AB Sandvik Coromant Dr Moshe Goldberg ISCAR

All rights reserved. No portion of this publication covered by the copyright herein may be reproduced in any form or means – graphic, electronic, mechanical, photocopying, recording, taping, etc – without the written consent of the publisher. Opinions expressed by contributors and advertisers are not necessarily those of the publisher and editor.

Printed in Singapore by Fabulous Printers Pte Ltd MICA (P) No. 098/06/2012 PPS 840/09/2012 (022818) ISSN 0129/5519

Eastern HOLDINGS Ltd Executive Board

chairman Stephen Tay group executive director Kenneth Tan

Joson Ng Editor

etm

Eastern

Trade Media Pte Ltd an Eastern Holdings Ltd company

Head Office & Mailing Address: 1100 Lower Delta Road, EPL Building #02-05, Singapore 169206 Tel: (65) 6379-2888 Fax: (65) 6379-2806

6

metalworking equipment news Jul-Aug 2012

Fully

integrated performance

NEW

Tiger·tec® Silver ISO P Generation: new cutting materials plus new geometries! The combination of the unique Tiger·tec® Silver CVD coating with the completely new geometry family for an even greater range of applications makes the innovative performance marvel even more efficient when turning steel. That’s what we call pure performance – fully integrated into the processes of our customers.

Remarkable increase in performance: See the product video: Scan the QR code or go to http://goo.gl/frwc2

Competition Tiger·tec® Silver WPP10S

+ 75 %

Walter AG Singapore 20 Science Park Road, #01-04A / 05, Teletech Park Singapore Science Park II, Singapore 117674 www.walter-tools.com www.youtube.com/waltertools www.facebook.com/waltertools

ENQUIRY NO 039

Business News JTC Breaks Ground For CleanTech Two

Singapore: JTC kicked off the construction of CleanTech Two at CleanTech Park to meet the demand from industry players for cleantech-related R&D activities. The building will offer 22,300 sq m of office spaces, laboratories and workshop spaces on a 0.9 ha site.

Construction work is estimated to be completed by third quarter of 2014. The building will house the Advanced Remanufacturing Research Centre (ARTC), its anchor tenant.

The partnership agreement was signed by JTC CEO, Manohar Khiatani and Dr Lim Ser Yong, CEO, ARTC and executive director of SIMTech. The centre is a collaborative effort between public sector research labs, the academia and the industry players to advance remanufacturing technologies in Singapore and will be led by A*STAR, NTU, MNCs and SMEs. Mr Khiatani said in his speech that the partnership between JTC and ARTC brings JTC closer to its vision of advancing Singapore’s position as an innovative cleantech and sustainability hub in the global marketplace.

Guest of honour Lim Chuan Poh, chairman of A*STAR touched on the importance of remanufacturing in his speech at the groundbreaking ceremony. He said: “In certain instances, remanufacturing can save up to 85 percent of the energy that would otherwise have been expended in making a product from scratch.” He also quoted a study that showed the total energy savings from current remanufacturing activities worldwide is equivalent to about 16 million barrels of crude oil, which is the energy needed to fuel six million cars for up to a year.

8

metalworking equipment news Jul-Aug 2012

www.equipment-news.com

Tüv Süd Improves Revenue & Income Munich, Germany: In 2011, Tüv Süd set new records for revenue, income and headcount. The international service corporation increased its revenue to almost €1.7 billion (US$2.2 billion) (2010: €1.55 billion). Earnings before interest and taxes (EBIT) rose by 12 percent to around €160 million (2010: €143 million).

Dr Axel Stepken, chairman of the Board of Management of the company, emphasised: “Tüv Süd is increasingly turning into a global player: our revenue from international activities increased by more than 13 percent in 2011.”

The company generated around 35 percent of its revenue abroad in 2011 — a year-on-year increase of two percentage points.

In addition, the company also further reinforces its already strong position on the fiercely competitive domestic market, increasing its revenue in Germany by 5.5 percent in 2011.

Posco Named The World’s Most Competitive Steelmaker South Korea: The World Steel Dynamics, an agency specialising in the analysis of the steelmaking industry, announced that Posco has won the first place in the assessment of competitiveness o f s te e l m a k e r s w o r l d w i d e this year.

In this year's assessment, it evaluated top 35 steelmakers wo r l d w i d e i n te r m s o f 2 3 criteria including production output, profitability, technical innovation, price power, costcutting mea sure s, fina ncia l soundness and securement of raw materials.

www.HaasCNC.com

Haas

100%

Do You Know?

every haas FaCTory ouTleT has an invenTory oF ConsignmenT spares ready For loCal use.

Proudly Made USA I HaasCNC.com Proudly Made in the USAin Ithe HaasCNC.com

Haas Factory Outlet Singapore Philippines Malaysia

+65 6274 1222 +63 2 915 8725 +603 5569 5901 +604 3801581

Vietnam Indonesia Thailand

ENQUIRY NO 116

+84 8 38 44 71 92 +6221 56982718 +66 2726 7191 +66 3811 2700

businessnews

www.equipment-news.com

Manufacturing Technology Orders Up 10.2% In April

Delcam Advanced Manufacturing Facility Expands Metrology & Machining

US: April US ma nufacturing te c h nolog y orde rs tota l le d US$410.42 million according to AMT — The Association For Ma nu fac tu r ing Te ch nolog y.

T h i s to t a l , a s re p o r te d by companies participating in the USMTO progra m, wa s down 17.0 percent from March but up 2.9 percent up when compared w ith the tota l of US$398.73 million reported for April 2011.

With a yea r- to - date tota l of US$1,763.77 million, 2012 is up 10.2 percent compared w i t h 2 011. T h e s e nu m b e r s a nd a l l data i n t h is rep or t a re b a se d o n t he tot a l s o f actua l data repor ted by companies participating in the USMTO program. “ Ye a r- to - d a te o r d e r s o f m a n u f a c t u r i n g te c h n o l o g y are up a solid 10 percent over 2011,” said AMT president Doug Woods. “Manufacturing firms continue to hire, with yearover-year unemployment down from nearly 10 percent in 2011 to a little under seven percent this year. In the first quarter, US manufacturing technology exports rose consistently and factory productivity increased five percent. What remains to be seen is whether overseas instability and possible cooling of domestic investment will disr upt cont inued g row t h,” he added.

Birmingham, UK: Delcam has expanded the range of equipment within the Advanced Manufacturing Facility at the company’s Birmingham headquarters with the addition of a GOM ATOS ScanBox inspection cell for 3D metrology and reverse engineering, and a Hermle C50 UMT five-axis machining centre.

These latest additions form part of a more general expansion of the Delcam Professional Services subsidiary as demand grows for its process development and prototype manufacturing services.

CGTech & DP Technology Develop Direct Interface Irvine, US: CGTech and DP Technology have developed an Espritto-Vericut Interface. The interface launches Vericut NC verification, machine simulation and optimisation software from within Esprit 2012 CAM software.

“Accurately simulating the CNC machine and material removal with the actual NC code that will run on the machine is a requirement for the complex CNC machines and machining processes supported by Esprit users,” said CGTech’s product marketing manager Bill Hasenjaeger.

“Working together, the combination provides a solution to help prevent errors from being forwarded to the shop floor — avoiding material scrap, machine damage, broken tools and wasted time.”

By simulating CNC programs on a computer without using the actual machine tool, the users are able to realise savings and efficiencies by reducing machine cycle time, improving work quality and maximising throughput. Possible programming errors are identified sooner without putting the actual machine tool at risk.

OFFICIAL

MAGA ZIN E OF

METALTE CH 2012 April 2012

www.eq

uipment-

news.co M.I.C.A.

m

(P) No. 053/06/20

11

ADVERTISEM

ENT

Deliver Innovativ ing 100% e Metal Productiv working ity

087 Iscar

www .isca

www.isca Cover.indd

metalworking equipment news Jul-Aug 2012

The APMEN eBook is now available on iPad.

www.equipment-news.com

r.com

r.com

2

Marcell Marra, SJ Campos 4/4/12

10

No More Clicking!

10:01 AM

 New Head changeable drill - Innovative Quick Change System  Optimum flute design with twisted coolant holes  Polished flute for smooth chip evacuation &

coated body for prolonged body life

 One drill body can cover different diameter of drill head  New TT9080 grade with multiple layers structure to

guarantee longer tool life

304 Yonggye 4-ri, Gachang-myeon, Dalseong-gun, Daegu 711-864, KOREA Tel: +82-53-760-7640 Fax: +82-53-768-8055 http://www.taegutec.com Argentina _ Australia _ Belarus Rep. _ Belgium _ Brazil _ Chile _ China _ Croatia _ Czech Rep. _ Denmark _ Egypt _ Finland France _ Germany _ Greece _ Hungary _ India _ Indonesia _ Ireland _ Italy _ Japan _ Malaysia _ The Netherlands _ New Zealand Norway _ Pakistan _ Philippines _ Poland _ Portugal _ Romania _ Russia _ Serbia _ Singapore _ Slovakia _ Slovenia _ South Africa Spain _ Sweden _ Taiwan _ Thailand _ Turkey _ Ukraine _ United Arab Emirates _ United Kingdom _ U.S.A _ Vietnam

ENQUIRY NO 118

TaeguTec Ltd. World Headquarters

businessnews

Singapore’s GDP Growth Forecast Between 1.0 To 3.0 Percent

Singapore: The global economy started the year on a firmer footing compared to the second half of 2011, with gains in manufacturing activities supported by increased consumer demand in major economies such as the US and China. Alongside the improvement in macroeconomic conditions, Singapore’s growth momentum has picked up, anchored by a strong upturn in the manufacturing sector.

Nevertheless, the recovery in the global economy remains fragile and vulnerable to downside risks. The US labour market remains sluggish with unemployment rate still at a high level. The Eurozone economies will remain weak, as ongoing fiscal austerity and bank deleveraging continue to dampen domestic demand in the region.

In Asia, notwithstanding the support from rising domestic demand, growth will be curtailed by lacklustre export performances amidst the external headwinds.

In addition, there is increased uncertainty surrounding the Eurozone’s political climate and fiscal outlook. A disorderly sovereign debt default in the Eurozone cannot be ruled out at this stage. If it materialises, there will be considerable downsides for the global economy and Singapore’s externally oriented industries. In view of these factors, MTI is maintaining the economic growth forecast for 2012 at 1.0 to 3.0 percent.

MOU Signed To Conduct Joint Research For Manufacturing Technology & Processes Tokyo, Japan: Boeing and its three major Japanese airframe partners — Mitsubishi Heavy Industries, Kawasaki Heavy Industries and Fuji Heavy Industries — have signed a memorandum of understanding with Institute of Industrial Science (IIS), the University of Tokyo. Under the MOU, the parties will commence joint research and work to create a consortium to develop industrial-scale manufacturing technology and processes, in a new model of academic-industry cooperation.

Efforts initially will focus on the development of machining and drilling process technology for titanium, aluminium and composite materials. The parties' aim is to form a consortium for manufacturing innovation within IIS to tackle manufacturing issues common across different industries in current and future production.

12

metalworking equipment news Jul-Aug 2012

www.equipment-news.com

Honda Begins Construction Of Auto Plant In Indonesia

Jakarta, Indonesia: PT Honda Prospect Motor (HPM), Honda’s automobile manufacturing and sales joint venture in Indonesia, has held a groundbreaking ceremony to mark the start of the construction of its automobile production plant in Karawang Industrial Park in the suburb of Jakarta.

With annual production capacity of 120,000 units, the auto plant is scheduled to begin production in 2014 in order to continue meeting demands in the growing automobile market in Indonesia. In addition to BRIO, which was developed especially for Asian markets, HPM is planning to produce a MPV (Multi-Purpose Vehicle) model at the plant.

The plant, an investment of approximately 3.1 trillion Indone sia n r upia h ( US$329 million), will employ approximately 2,000 associates at the start of production. Combined with the current capacity of 60,000 units, the company’s annual production capacity will total 180,000 units.

Moreover, HPM will strengthen the local product development function, establish an efficient production system, and increase local content to approximately 80 percent from the current level of approximately 50 percent. Through these efforts, the company will provide high-quality products to its customers with speed and affordability.

Door Door DoorOpening Opening OpeningSolutions Solutions Solutions for for forRough Rough RoughMilling Milling Milling

A New A New A New Series Series Series of of Extended of Extended Extended Flute Flute Flute Cutters Cutters Cutters forfor Large for Large Large Depth Depth Depth Shoulder Shoulder Shoulder Milling Milling Milling Operations.

Operations.

Operations.

AnAn Excellent An Excellent Excellent Solution Solution Solution forfor Milling for Milling Milling at at High at High High Metal Metal Metal Removal Removal Removal Rates Rates Rates

Tools Tools with Tools with high with high helical high helical cutting helical cutting cutting Tools Tools with Tools with tangential with tangential tangential inserts inserts inserts Tools Tools with Tools with high with high positive high positive positive edged edged inserts edged inserts which inserts which reduce which reduce cutting reduce cutting cuttingfeaturing featuring featuring 4 strong 4 strong 4cutting strong cutting edges cutting edges edges 4 cutting 4 cutting 4 edged cutting edged inserts edged inserts inserts forces forces forces Suitable Suitable Suitable for heavy for heavy formachining heavy machining machining An excellent An excellent An excellent solution solution solution for low for low for low Full Full effective Full effective effective cutter cutter flcutter utes flutes enabling flutes enabling enabling of diverse of diverse of diverse materials materials materials higher higher table higher table feed table feedfeed

Tungaloy Singapore Pte. Ltd. 31 Kaki Bukit Road 3 #05-19 Techlink Singapore 417818 Tel: (65) 6391 1833 • Fax: (65) 6299 4557 www.tungaloy.co.jp/tspl/

www.tungaloy.co.jp/en www.tungaloy.co.jp/en www.tungaloy.co.jp/en

power power consumption power consumption consumption machines machines machines

ENQUIRY NO 119

AskAsk forAsk More for for More More of Tungaloy's of Tungaloy's of Tungaloy's Door Door Opening Door Opening Opening Solutions Solutions Solutions

businessnews

www.equipment-news.com

UCIMU: Machine Tool Orders In Q1 Increased By 10.5 Percent

Italy: During the first quarter of 2012, the machine tool index of orders, processed by the Studies Department of UCIMU-Sistemi Per Produrre has recorded a 10.5 percent increase when compared with the same period of last year.

The index relating to foreign orders has in fact increased by 12 percent in comparison with the same period of last year, for a total absolute record value of 158.9.

On the other hand, the index relating to interna l orders, ‘increased’ by 0.1 percent in relation to the first quarter of 2011, for an absolute value of 69.3, shows all the weakness of the home market, which demand remains stagnant.

Giancarlo Losma, president of UCIMU-Sistemi Per Produrre, said: “The continuation of this condition of investment freeze in production technology, forces us

Three Predictions For Industrial Automation & Process Control London, UK: Frost & Sullivan released its three big predictions for the industrial automation and process control market. Energy efficiency and sustainability, smart technologies and the influence from BRIC and other emerging economies will be the key topics in 2012 and beyond.

Based on a survey of several hundred companies conducted in December 2011, this research paper highlights areas of growth. “Energy efficiency, advanced technology and geo-economics will transform the face of industrial automation in the future. Along with sustainability, these factors are set to influence product design, project cost and service capabilities of industrial automation vendors in the nextgeneration enterprise,” comments Muthukumar Viswanathan, director for Automation and Process Control at Frost & Sullivan.

14

metalworking equipment news Jul-Aug 2012

Energy Efficiency & Sustainability Sustainability, in terms of energy and resource efficiency, will be a key ingredient for the success of the global manufacturing industry. The growing focus on the implementation of energy efficient solutions in both process and discrete industries will also promote sustainable manufacturing. Energy efficiency concerns will dominate business in the electric motors market, with class IE3 energy efficiency — a stricter requirement compared to class IE2 energy efficiency — required in 2015.

Smart Technologies Factories of the future will be driven by megatrends such as cloud computing, cyber security and mobile and wireless communication technologies.

The need for higher productivity and greater efficiency will drive

all to a careful assessment of the risk of loss of competitiveness of the industrial network of the country, at all levels within the production chain.”

“On the other hand,” added Alfredo Mariotti, general director of the Association, “machine to o l co mp a n i e s , i n c lu d i n g foreign ones, still believe in the Italian market, and know the unexpressed potential of the demand. This is demonstrated by the figures for the attendance to BI-MU, the bi-annual exhibition of the sector, which will take place next October in Milan. To date, the figures show a 26 percent increase in purchases of exhibition space when compared with the space purchased by the same period in 2010 (the previous edition). The hope is that the positive trend will continue in the next few months, and that it will be confirmed in the final event results of the event.” organisations to implement greater interaction between the factory floor and enterprise across all endusers. This will be achieved also by leveraging on technology to provide automation solutions enabling endusers to gain a competitive edge in the global market.

BRIC & Other Emerging Economies BR IC a nd other emerging economies across the globe are likely to sustain high growth in industrial automation markets.

The strongest growth is expected in emerging markets, especially in the Middle East, South East Asia, and Eastern Europe.

Oppor tunities connected with the modernisation of old infra structure also ex ist in developed regions such as North America and Western Europe. In addition, flexible manufacturing will aid regional customisation by aligning the product portfolio to suit market demands.

ENQUIRY NO 123

businessnews

www.equipment-news.com

Ambrozjo, Wielkopolskie, Poland

Businesses Say Sustainability Is Vital to Growth: Study

London, UK: The vast majority of businesses say that sustainability is vital to their future growth, but almost half say that margins are currently lower on sustainable products and services, according to research by Accenture.

The survey of 250 senior executives in eight leading mature and emerging economies reveals that 44 percent think sustainability is critical to their business and 78 percent say it is vital to their future growth. Nearly two thirds (62 percent) of respondents claim their sustainable investments are motivated by customer expectations for sustainable products and services and 60 percent by the opportunity to drive growth. Only 41 percent of those surveyed are motivated by regulatory compliance and only 29 percent by the need to reduce energy and material costs.

When respondents were asked if their sustainable investments are primarily aimed at aiding growth or improving efficiencies and cost cutting, almost twice as many pointed to growth over efficiencies (41 percent to 22 percent). In emerging markets, the distinction was greater still, exactly half of surveyed executives opting for growth over cost savings (18 percent).

While the vast majority (83 percent) of responding senior decision makers see spending on sustainability as an investment rather than a cost, a majority (56 percent) say it is currently more expensive to be a sustainable business. Forty-nine percent say that margins are currently lower on sustainable products and services. The figure rises to 54 percent of surveyed businesses in the US and 58 percent in emerging markets.

“The good news is that companies now systematically see sustainability as being vital to their future growth and core to their business,” said Bruno Berthon, MD, Sustainability Services at Accenture.

“Sustainability has broken free from the realm of regulatory pressure and reputation management, and is now rising into a virtuous circle of commercial opportunity and investment growth. Businesses must now industrialise and scale production in order to drive higher levels of productivity, operational discipline and cost optimisation into what can often be immature operating models in high growth sustainable markets.”

Premium Prices The concern over lower margins may be explained by the survey’s finding that businesses think consumers are reluctant to pay more for sustainable products and services. Almost half (47 percent) of respondents say that consumers are not willing to pay a premium for them (exactly a quarter of respondents believe that they are willing to do so).

Nevertheless, 60 percent admit to charging premiums for sustainable products and services and the largest proportion of those that do so (68 percent) claim they can charge between 5 and 20 percent premiums. Seventeen percent claim they can charge premiums of between 20 and 50 percent. Yet, despite charging higher prices, over one third (37 percent) of surveyed businesses say they cannot keep up with customer demand for sustainable products and services. This figure rises to 44 percent in emerging markets.

SKF Receives Award From Bombardier Transportation G o t he nbu r g, Swe de n: T he SK F Group has received the Sustainable Supplier Award from Bomba rdier Tra nspor tation for integrating CSR in business principles and in management standards.

"Bombardier Transportation has been a strategic customer to SKF for many years and we are pleased to accept this award 16

metalworking equipment news Jul-Aug 2012

that recognises the work we do to integrate CSR into all areas of our business," says Henrik Lange, president, SKF Industrial Market, Strategic Industries.

"SKF Care, our sustainability program, drives how we integrate sustainability into our business, into our environment projects, i n to h o w w e s u p p o r t o u r employees, and how we work

with the communities where we do business."

Pierre Attendu, chief procurement officer of Bombardier Transportation, presented the award in Berlin with the statement that SKF is going beyond industry standard. He further stated: "The excellence of integrating CSR in the business principles has been successfully achieved by SKF."

Inspect Faster with NI Vision Builder AI

>>

Get your FREE 30-day trial version at ni.com/vision/vbai

National Instruments ASEAN ni.com asean@ni.com 

Singapore 1800 226 5886 Philippines 1800 1888 3834 Indonesia (62) 21 2924 1911

Malaysia 1800 887 710 Vietnam 1800 585 837 Thailand 1800 345 555

Other ASEAN Countries (65) 6226 5886

©2012 National Instruments. All rights reserved. LabVIEW, National Instruments, NI, and ni.com are trademarks of National Instruments.

Other product and company names listed are trademarks or trade names of their respective companies. 05955

Vision Builder AI NEW! Configurable Machine Vision No Programming Required Acquisition from Thousands of Cameras 





1800 226 5886

ENQUIRY NO 120

Make your vision a reality. National Instruments Vision Builder for Automated Inspection (AI) now features an innovative state machine editor, taking you from initial design to deployed vision application faster than ever. Take advantage of the more than 100 included image processing steps, acquisition from thousands of cameras, and easy integration with existing industrial control hardware to make your deployment faster and easier – no programming required.

businessnews

www.equipment-news.com

Aluminium-Intensive Industries To Boost Bauxite Production In Asia New York, US: Bauxite mining in Australia, China, India and Kazakhstan is expanding rapidly due to an eager end-use market and gigantic reserves, but regulations may prove a hindrance to ambitious miners, according to natural resources experts GBI Research.

The report shows that while Asia-Pacific is estimated to hold the second-largest reserves of bauxite in the world, with Australia and China ranking as the top bauxiteproducing countries globally, practicalities may get in the way of future profits.

Asia-Pacific accounted for around 64 percent of global bauxite production in 2011, and levels are expected to shoot up further as a result of the growing regional

demand for aluminium. Asia-Pacific consumed an estimated 160 MMt of bauxite in 2011, as the construction, automobile, electrical appliances and packaging industries in the rapidly developing economies of China, India and Australia began to source more bauxite with which to expand their businesses.

China’s 12th Five-Year Plan will also see more bauxite imported into the countr y to support the State Grid Corporation of China’s plans to build a network of aluminium ultra-high voltage electricity transmission lines to enhance transmission capacity in remote areas.

However, regulatory issues imposed on the mining industries of many Asian countries may

damage bauxite production levels in the region. Australia’s national parliament announced plans in November 2011 to impose a US$23.6m-per-ton tax on carbon emissions for the biggest industrial polluters from mid-2012, while the Kazakhstani government’s Mineral Extraction Tax and Excess Profit Tax has been an important fundraiser for the government, but an object of criticism from the mining companies.

A sia - Pacific produced an estimated 136 Million Metric Tonnes (MMt) of bauxite in 2011, against a consumption of 160 MMt. Production is expected to increase during 2012-2020 at a Compound Annual Growth Rate (CAGR) of 6.7 percent, to reach approximately 249 MMt. Similarly, consumption is expected to grow at a CAGR of 6.3 percent to reach 276 MMt in 2020.

APEC Economies Remain The World’s Fastest Growing

g-

po

in t,

C

ze

ch

Re

pu

b li

c

Kazan, Russia: The growth of APEC’s 21 member economies is expected to buck global trends and outpace the rest of the world in 2012 despite the uncertain environment, according to a report issued by the APEC Policy Support Unit ahead of the Meeting of APEC Ministers Responsible for Trade in Kazan.

A PEC economies’ grow th 18

metalworking equipment news Jul-Aug 2012

moderated from 5.9 percent in 2010 to 4.1 percent in 2011 but kept ahead of the 3.9 percent global growth rate in 2011, the A PEC Economic Trends Analysis reveals.

T he moderat ion of APEC economies’ growth partly reflected weaker investment and exports amid the intensification of the Euro area debt crisis and disruptions to the APEC region’s supply and production chains caused by a series of natural disasters.

Private domestic consumption within APEC economies was robust, however, supported by strong income growth and improved employment opportunities.

In 2012, the APEC region’s growth is forecast to accelerate to 4.3 percent and climb further to 4.7 percent in 2013. By comparison, world growth is projected to decelerate to 3.5 percent in 2012

before rebounding to 4.1 percent in 2013.

“The relative strong performance of APEC economies within the current economic climate is significant,” said Raymond Greene, the APEC Economic Committee’s chair.

GDP growth of industrialised APEC economies is expected to show resiliency with a 2.1 percent pick-up in 2012 while industrialised economies outside the region are facing the prospect of a mild recession.

Developing and emerging APEC members’ GDP growth is meanwhile forecast to soften to 6.3 percent in 2012. Yet they will remain the world’s fastest growing economies, contributing more than 50 percent of global real GDP growth.

APEC’s developing and emerging economies a re fur thermore predicted to regain ground in 2013 on 6.9 percent growth although external factors remain a cause for concern for all APEC members.

Contura G2

Spectrum II

ACCURA II

Metrotom

O-Inspect

3 - 6 July 2012 0900 - 1700 hrs

Booth No. AK4-01

3 3

Indonesia Indonesia Tel: (62) 21 7884 8028 Tel: (62) 21 7884 8028 ENQUIRY NO 124

Tel: (66) 2 248 8787 (Effective from 1 August 2012)

businessnews

www.equipment-news.com

Aerospace

Soaring Commercial Aviation Market Drives Aerospace & Defence Industry

Times are good for the A & D sector

London, UK: The Aerospace and Defence (A&D) industry experienced a record year in 2011 on the strength of a surging commercial aviation market, according to the Aerospace & Defence 2011 year in review and 2012 forecast report from PwC. In 2011, the top 100 A&D companies reported $677 billion in revenue, a five percent increase compared to the previous year, and $60 billion in operating profit, an increase of two percent from 2010.

Neil Hampson, global aerospace and defence leader, PwC, said: “This year, we expect continued growth in commercial aerospace resulting from strong and steady demand for global aviation and increased commercial aircraft production.

Conversely, defence revenues should continue to remain low, but recent cost-cutting actions should mitigate the impact on company bottom lines. While revenue is

expected to rise for the sector overall, there is a significant risk that return on sales could drop due to supply chain inefficiencies.”

Commercia l aerospace companies predominantly reported strong revenue growth and delivered a record number of large aircraft in 2011, exceeding 1,000, driven by a record backlog and increasing production rates. The strong order activity was largely led by the launch of two new single-aisle aircrafts, the A320Neo and 737Max. These re-engined versions of existing models, which promise at least 15 percent efficiency improvement, have unleashed a flurry of orders, both in the expanding Asian market and among US carriers.

Mr Hampson said: “2012 is already off to a great start, but the industry will continue to face challenges such as rising production rates, raw materials shortages and

late deliveries. Despite these issues, times are good for the A&D sector.

In fact, many are debating whether there’s a bubble in the industry.

However, current backlog levels provide ample cushion between demand and production rates, likely absorbing any reasonable softening in demand near-term.”

One area of opportunity for defence contractors has been exports, where growth led to a record backlog of $327 billion at mid-year 2011. However, defence companies are and will continue, to face more pressure than ever to improve productivity, increase transparency and respond to increasingly complex government regulations, especially given uncertainty over longer-term prospects including looming budget cuts, the growing threats of Iran’s nuclear weapons program and the US military’s role in world affairs.

As the report highlights, the industry must overcome three challenges to thrive in the future: preserving innovation, improving productivity and abiding by the regulatory environment.

He said: “The current focus remains on affordability, so contractors need to stay dedicated to improving productivity, where they’ll start seeing the shift from new platforms to platform upgrades and sustainment. The industry also needs to recognise the value of innovation and research and must invest in knowledge retention and training.”

Pratt & Whitney Inaugurates A Propulsion Company Facility In The Middle East East Hartford, US & Riyadh, Saudi Arabia: The Middle East Propulsion Company (MEPC), a joint venture between Pratt & Whitney’s parent company United Technologies Corporation, Saudi Arabian Airlines, Mohawearean Aviation Services Company and MTU Aero Engines has opened an aircraft-engine maintenance facility in Riyadh, Saudi Arabia, to handle 20

metalworking equipment news Jul-Aug 2012

increasing needs for maintenance and repair of military aircraft engines in the region.

The 194,000 sq ft facility will accommodate forecast growth in both existing and new product lines. MEPC has been the overhaul provider of choice for the Royal Saudi Air Force’s F100-PW-220/220E engines since it opened in 2001.

Growth plans include expanding

the facility’s portfolio to include engines for military helicopters, tanks and others vehicles.

MEPC, which provides military engine maintenance, repair and overhaul (MRO) services for the Middle East, is part of a larger network of Pratt & Whitney military MRO solutions, offering a range of services.

Pure technology at the brand new HAIMER Technical Center Jakarta, Indonesia!

Plenty of innovations are waiting for you from June 19, 2012! Look and see the approved HAIMER Quality and the optimized process chain.

Feel free to visit us from June 19, 2012 at our brand new Technical Center in Jakarta!

Haimer Asia Pacific Limited Alam Sutera Town Center Block 10F, No 28., Serpong, Tangerang

ENQUIRY NO 126

businessnews

www.equipment-news.com

Aerospace

Embraer & AVIC In Joint Venture To Build Executive Jets In China ​ io de Janeiro, Brazil: Embraer R and Aviation Industry Corporation of China (AVIC) have signed an agreement to build Embraer’s Legacy 600/650 executive jets in China, using the infrastructure, financial resources and workforce of their joint venture Harbin Embraer Aircraft Industry (HEAI), which started operations in 2002.

The agreement is based on

the understanding of both parties about the potential demand of China’s flourishing executive aviation market, and their wish to extend their decade-long strategic partnership. HEAI’s first executive jet is expected to be delivered by the end of 2013.

To date, Embraer has 154 firm orders from China market, with 116 aircraft already delivered.

T he compa ny accou nt s for around 78 percent of China’s regional aviation market and is gaining strength in its executive segment with 18 firm orders for executive jets in the year 2011.

The cooperation with AVIC on Legacy 600/650 program further consolidates the company’s presence in China’s executive aviation market.

Scanning With Terahertz Waves

Germany: Radio signals reach pilots on board an aircraft through the ‘radar dome’, the rounded nose of the aircraft. But if errors occur during the production of this ‘nose’, — tiny foreign particles, drops of water or air bubbles — this can impede radio traffic.

Researchers at the Fraunhofer Institute for Physical Measurement Techniques IPM in Kaiserslautern are working with partners in industry and research to develop a new testing system: the system uses terahertz waves to completely scan the aircraft nose, which is several centimeters thick, and immediately identify any flaws.

The frequency of terahertz waves falls between that of microwaves on the one hand and infrared light on the other. They are completely harmless 22

metalworking equipment news Jul-Aug 2012

to hu ma n s. T he wave s a re generated in a rolling cabinet not unlike those found in many offices: it contains a microwave source and all electronics to control the system and to collect the data. A frequency mixer multiplies the frequency of the microwave radiation generated into the terahertz range.

Researchers have connected the actual measurement module to this container by means of electrical wires. This module e m it s t he te ra he r t z wave s toward the radar dome. The material reflects the radiation, a nd the detector integrated in this module analyses the reflected terahertz radiation.

If there are any air bubbles or little imperfections embedded in the material, they turn up in the reflected signal.

The main challenge facing researchers was to find out which terahertz frequencies they would have to use to bombard the material to achieve the most effective results for the various imperfections.

Higher frequencies create better resolution, while lower frequencies have less difficulty penetrating the material. The researchers select from a range of different frequencies depending on the errors the researchers are looking for in the case concerned. The scientists have already developed a prototype of the testing system.

Around a year from now, the scanner will have advanced to the point that it will scan and analyse aircraft noses automatically. Cuurently, simple scanners for level and rotations symmetrical objects are available.

InnovatIve band saw blades for your requIrements of today and tomorrow Customised band saw blades and support for higher efficiency With more than 50 years of experience in the development and production of high-performance tools, WIKUS is Europe‘s largest manufacturer of band saw blades and global technology leader in metal sawing.

Precision band saw blades from WIKUS represent innovation and productivity with the objective of higher efficiency for the customer.

WIKUS is offering you: · Innovative band saw blades, optimised for all kinds of sawing tasks · Competent and individual customer service in the entire sawing process · Cutting tests directly on location of the customer

WIKUS-Sägenfabrik Wilhelm H. Kullmann GmbH & Co. KG melsunger str. 30 34286 spangenberg Germany tel.: + 49 5663 500 – 0 eMail: info@wikus.com

Made in Spangenberg, made in Germany.

ENQUIRY NO 117

www.wikus.com

Business Statistics

www.equipment-news.com

Domestic Orders Holding Up For Germany’s Machine Tool Industry Dr Wilfried Schäfer

Frankfurt am Main, Germany: In the first quarter of 2012, order bookings in Germany’s machine tool industry fell by seven percent.

Domestic orders were one percent down on the preceding year’s equivalent figure. Orders from abroad fell by nine percent compared to the historical highs of the previous year.

“Capacity utilisation is still holding up well in Germany’s i n d u s t r i a l s e c t o r, w h i c h is investing in additiona l c ap ac it ie s for copi n g w it h its orders,” says Dr Wilfried Schäfer, executive director of the sectoral organisation VDW (German Machine Tool Builders’ Association), Frankfurt am Main.

Domestic demand for forming technology, in particular, has had a stabilising effect. Forming technology is used primarily in longer-term project business for larger customer groupings like

Note: Index basis shipments 2005=100, data until March 2012 Sources: VDW,VDMA

the automotive industry. So very sizeable orders in the first quarter of 2012 led to yet another rise in order bookings of more than one-fifth.

“European demand, too, is still looking good,” he says. Although the debt crisis is being reflected in declining orders from Southern Europe, other European countries like the Scandinavian nations, the UK or France have continued to place substantial orders, a trend already foreshadowed at the METAV 2012. Exhibitors at the trade fair had confirmed a continuingly high propensity to invest in Europe’s industrial sectors.

The order backlog, at nine months in February of this year, is at a similar level to October of

last year. Capacity utilisation, at 95.1 percent in April 2012, was likewise almost unchanged. In February of this year, the sector was employing 68,200 people, 6.4 percent up on the preceding year’s equivalent figure.

“The German machine tool industry is still performing well.

By reason of the order backlog, a rise in production output for 2012 is virtually assured,” predicts Dr Schäfer. The VDW is forecasting growth of five percent. Although demand is quietening down, this has already been factored into the pricing, and will give the companies a breathing space for addressing strategic issues, like expanding their business operations in Asia.

Maintaining The Growth Momentum In PM

Shipments of copper and copper-based and tin powders gained almost 19 percent in 2011 to 17,002 short tonnes. Stainless steel–powder shipments increased about five percent to an estimated 7,000 short tonnes.

Shipments of North American MIM grade powders, including imports, jumped nearly 40 percent in 2011. The MIM process continued to garner greater acceptance in the materials marketplace. Some interesting R&D programs include developing M I M u lt ra sonic

Nashville, US: In all materials, process, and market sectors, the North American Powder Metallurgy (PM) industry has built on the growth momentum begun last year, said Matthew Bulger, president, Metal Powder Industries Federation.

Traditional press-and-sinter PM, Metal Injection Moulding (MIM), Hot Isostatic Pressing (HIP), and other specialty PM technologies are thriving. PM is an interconnected technology that innovates and 24

German Machine Tool Industry - Moderate fall in demand during the first quarter of 2012

metalworking equipment news Jul-Aug 2012

grows by leveraging its different sectors. Looking back at the past two years clearly suggests that the industry’s recovery is sustainable.

Ironpowder shipments soared in 2010 after a terrible previous year.

Total iron-powder shipments grew modestly in 2011 to 363,831 short tonnes, a three percent increase.

This increase was also achieved despite the shutdown of a major powder supplier’s main plant for two months.

businessStatistics

www.equipment-news.com

dentalscaler tips and endodontic tips, and titanium and cobalt– chromium alloys for medicalimplant applications.

The HIP business has also experienced robust growth in 2011 due to a general surge in manufacturing, and gains in the oil and gas, tool-steel, and aerospace markets. The HIPing of MIM parts continues to be a growing market.

Sustained Growth Ahead Mr Bulger noted that 2012 began on a very positive note, with rising confidence levels. First-quarter shipments of metal powders are up, as are volumes of PM parts and MIM parts. US light-vehicle sales are expected to top 14 million units, up substantially from the 12.8 million units sold in 2011.

Iron-powder shipments through April this year rose by 11.25 percent to 134,925 short tonnes.

Copper and copper-base and tin powder shipments have remained stable. One of the key issues facing the entire industry is the serious need for experienced production workers and PM engineering professionals. Industry-wide employee reductions during 2008– 09 have not been easy to reverse as the industry has rebounded.

Another issue is capacity constraints: will the industry be ready to meet rising demands, pa r t icu la rly dr ive n by t he automotive industry, in the next several years? As was the case with staffs, rationalisation moves

during the same 2008–09 period included several plant closings and the scrapping of older equipment.

Because it can take upwards of 10 to 12 months to build a high-end press and put it into production, Mr Bulger cautioned, the equipment investment bandwagon must begin rolling sooner rather than later.

Within the automotive sector, PM is approaching a saturation point in auto-engine content with existing technology. The average

auto engine now contains up to 50 PM parts weighing more than 18 pounds, including connecting rods, bearing caps, valve-seat inserts, and VVT parts.

Wit h t he avera ge Nor t h America–built engine containing up to 170 individual parts, PM parts currently represent about 30 percent of the content. Potential growth appears more likely in transfer-case and transmission applications.

INOVASI DI METALWORKING EQUIPMENT NEWS INDONESIA

DALAM PEMBUATAN CETAKAN & BESI ULIR Desember 2011 - Januari 2012

LAPORAN KHUSUS

ULASAN ACARA :

METALEX 2011:

MANUFACTURING INDONESIA

EMO

February - March 2012

METALWORKING EQUIPMENT NEWS INDONESIA

TENAGA TERAMPIL DIPERLUKAN

April - May 2012

Bending

‘Jantung’

Pendorongan Pada

VOL. 1 NO. 5 JUNE-JULY 2012

Menentukan Ketelitian Angin Perubahan

Tonic Untuk

Berikan

Produktivitas

LASER CUTTING:

Perlengkapan Pengukuran Terdepan:

Pelumasan Roda Gigi:

Perkembangan Dalam Pengeboran:

Di Industri Pembangkit Listrik

11/9/11 8:04 PM

FC MENI FebMar 2012.indd 3

Cross Scanners

VOL. 1 NO. 4 APRIL-MAY 2012

VOL. 1 NO. 3 FEBRUARY - MARCH 2012

VOL. 1 NO. 2 DESEMBER 2011 - JANUARI 2012 FC MENI DecJan 2012-2.indd 2

2012

SEMUA TERGANTUNG PILIHAN

Laser Fiber

Tantanginya!

Ada Gunanya Menjadi Rewel

KEBANGKITAN SEDANG BERLANGSUNG

Memotong Dengan

Jangan Hindari Logam Ekstrim,

Metrologi:

SIMTOS

June - July 2012

Kontak & Non-Kontak

METALWORKING EQUIPMENT NEWS INDONESIA

METALWORKING EQUIPMENT NEWS INDONESIA

MEMUKUL LOGAM

PEMBUBUTAN: MEMPERTIMBANGKAN LIMA-SUMBU

Pengukuran

Indonesia DENGAN LEBIH CEPAT DAN LEBIH CERDAS

CMM

Mengotomatiskan Inspeksi 2/11/12 2:07 PM

High Speed Machining

FC MENI AprMay 2012.indd 4

Lebih Kompleks dari Kelihatannya

4/16/12 11:32 AM

FC MENI JunJul 2012.indd 2

6/12/12 3:20 PM

Jul-Aug 2012 metalworking equipment news

25

Cutting

www.equipment-news.com

Edge

Vertical Support For Better Grinding The development of synchronous support grinding allows high feed speeds for grinding delicate workpieces such as a crankshaft or camshaft. By Oliver Hagenlocher, head of marketing, EMAG

T

26

metalworking equipment news Jul-Aug 2012

he international automobile market is still in the middle of a period of dynamic growth. The number of automobiles sold on a global basis rose by three percent in 2011 compared to the figure for 2010 according to the American market research institution, Polk.

The production situation at many automobile manufacturers as well as their suppliers is characterised by a great deal of enthusiasm. The ‘just in time’ quantities of a component that are required are also increasing rapidly. Quality is also being tested right now.

The fact that new mechanical engineering technologies can meet these challenges with ease is demonstrated by a particularly demanding application that has a major influence on the quality of the entire engine, the grinding of crankshafts and camshafts. A synchronous support grinding technology developed allows productivity in the production of the components to be improved by up to 70 percent.

role to play in the overall process because it must ensure that the components are true to size.

At the same time, the process is often time-consuming and demanding — in particular, shafts which are very slim are not very strong in the machining direction which often means that sophisticated stabilisation methods must be used with multiple trailing steady rests.

C o n s e q u e n t l y, o n l y comparatively low feed rates can be used — particularly to eliminate true running inaccuracies. This naturally results in long cycle times and low output. “ We d e c i d e d t o t a c k l e this problem head on in our development of a new grinding technology based on the vertical clamping of the component. Our idea was to reduce the forces, which act on the component during the grinding process.

Ultimately that will allow higher feed speeds,” explains Dr Guido Hegener, CEO of Emag Salach Maschinenfabrik.

Crankshaft & Camshaft Machining The production of crankshafts and camshafts are at the heart o f e n g i n e p ro d u c t i o n a n d their extraordinary geometry demands complex production processes. Grinding has a special

Low Forces Acting On The Component The development of synchronous support grinding marks a breakthrough by developers in this sensitive application. The principle is based on the use of two grinding wheels, which act on the crankshaft

CuttingEdge

www.equipment-news.com

Principle of synchronous support grinding

or camshaft from two sides moving in different directions.

The normal forces, which occur in the feed direction are compensated by the fact that the grinding wheels are mounted opposite each other and machine the component simultaneously.

At the same time, a simple NCcontrolled support is used to press against the workpiece from one side.

This means that the workpiece cannot move in any direction and also eliminates tangential forces. “This design therefore has multiple positive effects,” says Dr Hegener.

“On the one hand, extremely high feed speeds for grinding delicate workpieces such as a crankshaft or camshaft are possible due to the rigid clamping operation.

On the other, two grinding wheels are used simultaneously. This drastically reduces the machining time compared to the conventional grinding processes in use today.”

Vertical Design The design principle of a grinding machine is another major factor in ensuring that the components can be ground at low cost. Using the Emag grinding machine (VTC 315 DS) as an example, the shaft is clamped vertically inside the VTC. The workpiece spindle is at the top, the tailstock is at the bottom. The entire grinding process on the shaft

The machining of the main bearing takes place in several sequences, each with a grinding time of five seconds. Despite the short grinding time, true running inaccuracy levels of less than 10 mm have been recorded. This is much lower than the maximum tolerance limit and marks a clear improvement compared to the grinding process used in the past — in other words, a leap forward in quality.

takes place in this position.

The vertical position of the component also assists in producing good chip flow. This means that the removed material can be removed particularly easily and efficiently together with the cutting fluid. In addition, the cutting fluid does not flow over the structure of the machine and its temperature is not subject to fluctuation at any time during the process.

“This is a point which ultimately has a direct bearing on machining quality because the whole subject of heat management in the system is insignificant,” says Dr Hegener.

Shorter Grinding Time, Better Accuracy What have been the experiences of users of the synchronous support grinding principle? “The responses that we have had have been positive,” says Dr Hegener. “The principle can also be used for transmission shafts, propeller shafts, pump shafts and compensating shafts with a maximum length of up to 600 mm. In every case, there has been a leap in productivity. In some cases, the machining time has been cut by up to 70 percent compared to traditional grinding.”

On the other hand, the machining quality is improved. One example of this is the experience by a user in the production of a cast four-cylinder camshaft for a car.

Doubling The Benefits Synchronous support grinding is not just appropriate for circular grinding but also produces positive effects for non-circular applications.

Pairs of cams on four-cylinder camshafts can be machined simultaneously which means that four grinding wheels can grind a single camshaft at the same time.

This process on the one hand results in drastic reductions in machining times while on the other increasing the quality of the cam shape. This produces double benefits for the user.

Major Market Opportunities The fact that this process has major opportunities on the market will certainly not come as a surprise. In addition, there are many in favour of synchronous support grinding due to the fact that the shorter machining times also mean considerably lower energy costs.

“The energy per piece cost is much lower. This also means lower costs for the user,” confirms Dr Hegener. Furthermore, there is the fact that the vertical systems require less space than machines with a horizontal design.

“Economical processes, simple handling, high quality — the many benefits of synchronous support grinding compared to traditional grinding process will quickly become established on the market,” says Dr Hegener. MEN Enquiry No. 5001 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

27

CuttingEdge

www.equipment-news.com

Grinding Out Results With Software

The IT experts of Fritz Studer have developed a grinding software which delivers results during cylindrical grinding and simultaneously reduces the processing time by approximately 25 percent. By Erhard Kämpf, head of software department, forms and threads, Studer

T

oday’s cameras make it easier to shoot good pictures when compared to the past. As opposed to 20 years ago, today’s cameras are able to automatically select settings such as the aperture, the light sensitivity, or the exposure. There is now a similar development for cylindrical grinding machines.

Every component manufactured on the machine depends on the correct settings.

First, the user must select the corresponding grinding wheel.

Furthermore, the cutting speed, the cooling lubricant, the stability of the workpiece, critical speed ratios, and the influence of the grain size on the grinding wheel must be checked.

Even if an operator has a 28

metalworking equipment news Jul-Aug 2012

wealth of experience, he does not usually manage to instantly set the machine in an ideal manner.

The optimum would be the setting with which the machine precisely achieves the desired grinding result and simultaneously works most efficiently. Normally, this setting can only be found by means of systematic tests.

This takes time and so it is only reasonable when producing in large numbers. For a few hundred units or even smaller production volumes up to single-item production, the operators do not normally have the time to slowly approach the perfect setting.

Therefore, they mostly rely on their gut feeling regarding the values for dimensional, shape, and position tolerances, as well as surface quality. This results in the

Grinding Technology Calculator:

Advantages At A Glance • Automatic calculation and design of the process parameters • Direct integration of 300 machine parameters and a database • Integrated grinding know-how that can be expanded, optimised, and reproduced • Technological analysis, monitoring, and graphic feed curves • Graphic simulation of the grinding programs • Automatic reporting for the creation of set-up plans, tool lists, additional comments, and images • Time and cost calculation, quoting • Reduction of the set-up times • Shorter grinding times by approximately one quarter • Reduction of the optimisation time towards zero • Reduction of the error costs

CuttingEdge

www.equipment-news.com

following problem: the majority of users underestimate the machining output of a grinding wheel and, therefore, rarely dare to approach the limits of what is possible.

They often adjust the machine too cautiously and do not utilise its full potential. As a result, the production runs at a speed, which is much slower than what is possible.

This way, the companies waste large amount of time and money.

Monetary Savings A software solution called the StuderTechnology, which is essentially a grinding technology calculator, is available as a practical module of the CAM system StuderGrind. This program contains the entire near-100-year experience of the Swiss cylindrical grinding company.

The engineers supplied the software with the data from countless grinding tests, for which they approached the optimum for the most diverse workpieces again and again. This results in a machine that makes many decisions for the operator. The module determines the most important process-relevant influencing variables and the corresponding values automatically for each processing step.

The technology includes years of experience from Swiss cylindrical grinding experts

I n t h i s w a y, i m p r o v e d results can be achieved while simultaneously shortening processing times. A calculation revealed that the processing time, in most cases, could be reduced by at least a quarter with the technology.

For example, using an average universal grinding machine operating in two-shifts, productivity can often be increased to such an extent that a company can save large amount of money each year.

In this way, the purchase of the module often pays for itself after a short period of time.

StuderTechnology determines the appropriate values for each workpiece

As with a camera, automatic programs adjust the most important grinding parameters

One Software, Two Variants Recently, the grinding technology calculator has become available in two different versions. For customers operating their own programming office within their company, the full version of the software is available. Using this version, it is not only possible to program the machines on a PC to an ideal standard, but also to display simulations graphically, to calculate unit costs, or to generate operation schedules.

As the latest development, StuderTechnology integrated has now been added. In this version, the software is no longer located on a separate computer, but directly on the machine control system. Using this variant with a range of functions, which is reduced to a workshop level, Fritz Studer provides the machine operators with more freedom in their everyday work.

They need only enter the material and will immediately be provided with a suggestion regarding the correct grinding material and the ideal process parameters. Without tedious trial and error, an ideal result can be achieved at the push of a button. MEN Enquiry No. 5002 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

29

tech

www.equipment-news.com

Talk

Robots Can Be For You Too A common perception places robots in high-tech futuristic assembly facilities.

But the fact is that the usage of robots is applicable to traditional processes like welding and they can find a place in small job shops too. By Joson Ng

W

hen a person is asked to think about robots, it is a good bet that some would conjure up images of R2D2 and C3PO from the film Star Wars, or many other robots that have graced the silver screens of Hollywood. With the tag ‘advanced technology from the future’ invariantly placed on robots by popular culture, many tend to dismiss the relevance of robots in his/her business without even giving it the same consideration that is given to other technologies.

The perception of robots that is of advanced technology and more importantly, unreachable for most people is slowly changing.

In today’s industrialised world, the usage of robots is no longer rocket science or reserved for the top scientists of the world. In fact, it is down to simple logics and economics. It is about whether you need it for your business, and how robots can benefit it.

More Robots To Asia The applications of robots are far and wide today. It ranges from assembly, load bearing and even carrying out dangerous tasks like bomb disposal. It is therefore not surprising that robots have found their way to the metalworking industr y as well. Whether a business needs the help of robots

30

metalworking equipment news Jul-Aug 2012

depends largely on the intent, according to Alexander Wick, GM, Reis Robotics Singapore.

“The usage of robots depends on the type of products you have and your intention. Why are you using robots? If you are looking for high quantities, and high repeatability, robots are inevitable for bigger mass manufacturing companies.

But even if you are a smaller shop producing highly specialised parts, robot applications can be suitable for you as well. Robots can get you consistent quality, a stable production and an all-time availability that in most cases you cannot achieve manually,” he said.

If you are a smaller shop producing highly specialised parts, robot applications can be suitable for you too.

- Alexander Wick It seems that many in Asia are agreeing with Mr Wick.

He revealed to Asia Pacific Metalworking Equipment News in this exclusive interview that Asia

techTalk

www.equipment-news.com

Mr Wick sees China as an important market

there. So I see the markets for robots picking up in Asia.”

He added that China is currently his company’s best performing country in Asia in terms of sales, attributing to some 35 to 40 percent of the company’s

worldwide sales. An increase in demand can also be seen recently in Southeast Asia. On the whole, Asia has grown significantly over the past six to seven years to become the company’s second most important market.

ENQUIRY NO 042

is witnessing a rise in the takeup rate of robots, no doubt due to changing mindsets and also notably, the issue of labour cost.

“It (the take-up rate) is coming along well. In the beginning, there is no necessity in using robots. This is because the cost of manpower is very affordable. But a lot has since changed. If you look at a market like China for example, the cost of living is increasing year after year and for the first time it makes sense to use robots to save on labour costs,” he said.

There are other reasons for the popularity of robots in Asia.

Mr Wick said: “In the past, a lot of the companies were just selling to local markets. Awareness for quality was probably not that big. Now you see the companies selling more internationally. As such, the necessity for a certain level of volume and quality is

Jul-Aug 2012 metalworking equipment news

31

techTalk

www.equipment-news.com

Man’s new best friend? Robots lending a hand in welding

As far as industries are concerned, the automotive industry is responsible for some 40 to 50 percent of the company’s total sales. Mr Wick was, however, quick to point out that they are a company specialising in turnkey solutions customised to the customers’ requirements rather than ‘just selling’ a robot.

“Our typical customer is looking to improve and/or modernise his current production processes and we offer him the total solution from the planning stage until the final handover, all out of one hand,” he said. The company’s main customers in the automotive industry are tier 1 and 2 suppliers to the automotive manufacturers.

Robots In Metalworking With more Asian companies using robots, Mr Wick spoke at length on 32

metalworking equipment news Jul-Aug 2012

sick by taking in the poisonous fumes. Next thing is productivity; humans get tired, and make mistakes but not robots. They work 24 hours a day and seven days a week without any interruption.

Finally, if you look at quality, that is another big thing. A welder, once he gets tired, starts making mistakes. A robot always has consistent quality and also high repeatability.”

how robots can be incorporated into metalworking processes.

“In general, we offer a variety of vertical and linear robots giving us flexibility to cater for different possibilities. Depending on the applications, for example if you are in an environment where you need a lot of space, a great freedom of movement or a high reach, linear robots can be very helpful. If you have more stringent applications, vertical robots are more suitable,” he said.

Like in any other businesses, productivity and safety in metalworking are of utmost concern and he felt that robots could be a big help in these two areas.

He said: “If you look at safety, a robot can do a lot of things humans cannot do. You have applications that have a lot of hazardous risks.

For example, someone could be blinded by the welding light or get

Limitations & Corrections Mr Wick did admit that even with many advantages, robots do have limitations as well. He said: “In many cases, people make the mistake of thinking that a robot can do exactly what a human can do. A human can see for example, the deviation or gaps inside a welding part. A human can see that and correct the welding part. For a robot, this is much more complicated.”

One way to avoid this is part preparation. Using welding as an example, he said: “If you want to automate, you need a certain tolerance on parts and they need to be well prepared. Once you have a good clean preparation of the parts, then you do not have any issues. If you look at pipe and mandrel welding and you have two parts that are very clean, you do not have any issues if you want to weld them together. On the other hand, if the tolerances on the part become too big, it is very difficult or almost impossible to do it.”

In summary, the usage of robots is coming to Asia in a big way, and more people would identify it as a good assistant to help in keeping good productivity levels and process consistency. But at the end of the day, humans are still required to make certain decisions.

The best way forward for now is probably the combination of consistency and guile, which means the usage of robots with occasional human input. MEN Enquiry No. 5101 Turn to page 80a or log on to www.equipment-news.com to enquire

ENQUIRY NO 076

techTalk

www.equipment-news.com

Handling The

Load A robot loading system adds productivity to a machining centre. By Stefanie Senft, press relation officer, Kuka Robot

M

aschinenfabrik Ber thold Hermle, based in the Swabian town of Gosheim (Germany), is a manufacturer of milling machines and machining centres. In the RS 4 manufacturing system, the company has opted for the KR 1000 titan industrial robot.

The 1,000 kg payload capacity of the robot is suitable for fully-automatic loading and unloading of Hermle machining centres with heavy workpieces, such as those found in tool and die-making or in mechanical engineering.

Robotic Application Increases Service Life Of Spindle All C series machine models f ro m H e r m l e c a n b e f u l l y automated with robots. The RS 4 machining centre combines a ro b o t , a p a l l e t m a g a z i n e and one or even two five-axis C 50 U machining centres to form a production system. The robot system can transport loads weighing 1,000 kg and is used in production for the fully-automatic machining of heavy castings and aluminium workpieces.

A sensor-monitored

34

metalworking equipment news Jul-Aug 2012

techTalk

www.equipment-news.com

year,” says Kuka key technology manager Andreas Schuhbauer.

Automation of the machine tool boosts the productivity of the system. changeover station allows the manufacturing system to be loaded and unloaded without interrupting the machining process. The robot is responsible for loading and unloading the pallets with clamped workpieces.

In addition to its automatically exchangeable grippers, the robot can also directly handle the most varied workpieces with ease.

Pallet handling and workpiece handling are therefore possible in an ‘on-the-fly’ changeover without the need for operator intervention.

The robot is positioned in front of the machining centre and safeguarded by means of a door safety system.

“The robot system and the machining centre can each be operated manually, without disturbing the automatic sequence of the other unit,” says Rainer Kohler, MD of Hermle-Leibinger Systemtechnik, a Hermle subsidiary that specialises in the automation of machine tools. Two operations can therefore be executed in parallel: while one machine tool is machining a workpiece, another can be upgraded.

“The end result is longer service life of the spindles. And that, of course, is the whole point of the automation,” Mr Kohler adds.

Depending on customer requirements, the system can also be expanded to include a variety of heavy-duty racks f o r w o r k p i e c e s . P ro t o t y p e manufacturers, for example, can use this robot system for mixed operation: during the day, prototypes or high-quality parts are produced in small batches.

During the night, the system

is run in automatic mode and large batches or series parts are manufactured.

Achieving ROI With Flexibility “The robot is a flexible element in the machine tool,” explains Mr Kohler. The unlimited degrees of freedom of the robot make it possible to load and unload a range of pallets and workpieces of any size in a cell. The flexibility allows the operator to convert the system quickly to meet new challenges.

The robot ensures utilisation of the machining centre in three-shift operation — even at the weekend. Automation of the machine tool with the robot boosts the productivity of the system, reduces unit costs and shortens the payback period.

“In many cases, integration of the robot into the machine tool has paid for itself in just under a

Safe Robot Technology Safety is of paramount importance in machining centres. Where operator and robot work together in close proximity, it must be ensured that the robot cannot move out of its defined workspace.

‘Kuka.SafeOperation’ ensures just that — without the need for mechanical axis range monitoring or expensive, specially reinforced safety fences.

The software transfers safetyrelevant control tasks directly to the robot controller, thereby eliminating the need for an external safety PLC. It monitors the position and velocity of the robot and is responsible for operator safety.

“Anyone developing workpiece changing systems today can no longer dispense with robots,” affirms Mr Kohler. “The key factor in the face of global competition is to increase the service life of the machine. A robot system therefore will always be cost-effective.”

Enquiry No. 5102 Turn to page 80a or log on to www.equipment-news.com to enquire

Kuka: Agile Small Robot Kuka Roboter has added to its small robot family with the KR Agilus robot series. The basic model, KR 6 R900 sixx, weighing 51 kg, can carry a maximum payload of 6 kg. The energy supply system is integrated into the robot to save space and includes a 100 Mbit Ethernet cable, three 5/2-way valves (compressed air), a direct air hose, six digital inputs and two digital outputs.

In addition, the robot is operated with the universal KR C4 controller technology. The robust controller is designed for low maintenance and optimised energy efficiency. Finally, it is the only robot in its class to operate with the Kuka SafeOperation function, simplifying and improving humanrobot cooperation.

In the coming months, it will be followed by further payload variants in the standard, food, cleanroom and waterproof versions. MEN

Enquiry No. 5103

Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

35

techTalk

www.equipment-news.com

Product Highlights

Adept Technology: High Speed Motion Robot

Schunk: Electrically Driven Gripper

Adept Technology has developed the Adept Viper s1700D, a six-axis robot. Featuring motors that are faster and more efficient, the robot delivers higher speed motion and increased productivity. Like the previous Viper 1700 robot, the s1700D offers a long reach and high payload capacity within a small footprint.

With a reach of 1.7 m and a payload capacity of 20 kg, the robot is designed for applications that require fast and precise automation and can be deployed for material handling, machine tending, packaging, cutting and assembly.

The electrically driven small parts gripper EGP by Schunk p ro v e s t h a t m e c h a t ro n i c modules by no means have to be complicated. With respect to the mechatronics, it focuses on the essential and places hardly any demands on the user.

For example, it is controlled by the sensor distributor. It also allows conversion from pneumatic to electric gripper modules in a flash. An added advantage is that the sensor system of the pneumatic small parts gripper MPG-plus can be transferred 1:1 to the EGP.

Enquiry No. 5104 Turn to page 80a or log on to www.equipment-news.com to enquire

Festo: Human-Machine Cooperation

Toshiba Machine: Fast Cycle Time

The ExoHand from Festo is a solution for future humanmachine cooperation in industrial environments based on soft robotics. It is an exoskeleton that can be worn by an operator like a glove and designed to meet the challenge of an ageing population by functioning as an assistance system for assembly tasks in production.

The fingers can be actively moved and their strength amplified; the operator’s hand movements are registered and transmitted to the robotic hand in real time. ExoHand can simulate all the major physiological degrees of freedom of a human hand. As a result, it supports the various possibilities for gripping which a human hand has. As a force feedback system, it can extend people’s scope of action in production environments.

Toshiba Machine’s TV800 six-axis robot offers fast cycle times due to a low mass design. It however still exhibits rigidity and durability. The robot is also easy to program.

The TV800 model has an arm length of 800 mm, a reach of 920 mm and a composite maximum speed of 8.06 m/s. It has a maximum cycle time of 0.4 to 0.5 seconds, repeatability of ±0.02 mm and a maximum payload of 5 kg. The six-axis robot uses an absolute position detection system and a AC motor at its heart.

Enquiry No. 5105 Turn to page 80a or log on to www.equipment-news.com to enquire

36

Enquiry No. 5106 Turn to page 80a or log on to www.equipment-news.com to enquire

metalworking equipment news Jul-Aug 2012

Enquiry No. 5107 Turn to page 80a or log on to www.equipment-news.com to enquire

Components

Automation and Control

12-14 sept 2012 Materials Medical Grade Suntec Singapore

Medical Validation Solutions

Process Technology Sterilisation Systems

The Manufacturing Processes for Medical

Precision Engineering Technology Exhibition

Production Equipment

Clean Room Technology

Construction

Testing

MEDICAL MANUFACTURING ASIA Your Strategic Platform for Design Medical Technology Solutions Packaging

Research & Development Quality your Management Pre-register visit at www.medmanufacturing-asia.com

Opening hours 10.00am - 6.00pm Open to trade. Free by registration only.

Assembly

Concurrent events:

Nano-technology MEDICAL MANUFACTURING ASIA Conference 2012

In collaboration with:

Supported by:

IVAM Microtechnology Network Messe D端sseldorf / Organizer of

The 8th Occupational Safety+Health Exhibition for Asia

For enquiries:

Jointly organized by:

Messe D端sseldorf Asia Pte Ltd 3 HarbourFront Place #09-02 HarbourFront Tower Two Singapore 099254 Tel : (65) 6332 9620 Fax : (65) 6337 4633 / (65) 6332 9655 mma@mda.com.sg www.messe-duesseldorf.de/MDA

SPETA Singapore Precision Engineering & Tooling Association

Scan this code for Exhibitor & Product Highlights

software&

www.equipment-news.com

Metrology

Streaming

IT Into Solutions

Factories

M

anufacturing Execution System (MES) software is able to manage and monitor manufacturing operations in factories. This software can be used to support collaborative manufacturing strategies that are designed to integrate disparate data streams from a company’s supply chain and factory floor.

This allows movements of intermediate and finished products to be scheduled, controlled and checked, thereby increasing transparency and enabling management to make decisions based on reliable data.

Optimising Productivity Without Impacting On Profits According to a market report from

38

metalworking equipment news Jul-Aug 2012

Alaa Hamed, Cairo, Egypt

Incorporating a Manufacturing Execution System (MES) in factories can ease movement of data and production. By Natalia Tee

Frost and Sullivan, companies find it a challenge to drive operational improvement, optimise energy consumption, and reduce carbon footprint without impacting on profitability. Such issues can be resolved through shop floor to top-floor connectivity, which is an MES feature.

Previously, MES used to operate as self-contained systems; they are increasingly being integrated with Enterprise Resource Planning (ERP) software suites. The goal of the MES is to improve productivity and reduce cycle-time, whereby the latter refers to the total time to produce an order. As such, through the integration of MES and ERP, delivery of quality products in a

timely manner is ensured.

Real-time data collected by the MES for any production step can be called in, and can also be aggregated as Key Performance Indicators (KPIs) in terms of performance of individual plant parts and downtimes. Therefore, it provides a basis for continuous improvement along the entire production chain.

To fur ther illustrate the point, Saint-Gobain Sekurit, an automotive supplier, faced both pricing pressure and increasing productivity demands from suppliers. Their customers requested a price reduction of automotive products by six percent, at the same time, simultaneously

software&metrology

www.equipment-news.com

Supports Extended Enterprise Merging Manufacturing E xecution Systems and Product Lifecycle Management enhances integration of data and processes.

According to CIMData, a consulting firm that provides information on PLM technologies and services, PLM is defined as:

Carlos Paes, Lisbon, Portugal

• A strategic business approach that applies a consistent set of business solutions in support of collaborative creation, management, dissemination, and use of product information • Supports extended enterprise such as customers, design and supply partners • Spans all phases of product-development, from front-end concepts through manufacturing and on to maintenance, support, logistics, and eventual disposal

Flavio Takemoto, Brazil

• Integrates people, processes, business systems, and information

delivering 10 percent improvements in productivity.

In order to address these pressures, the company had implemented a platform that includes MES to provide realtime visibility and control for manufacturing operations. With this platform, the company is able to achieve standardisation on how product costs and KPIs are measured across the various plants.

In addition, the company is also able to identify areas where yields are best or time is lost as well as realising continuous improvement through best practices.

Furthermore, Rockwell Automation states that companies can use MES to manage energy as a form

Companies choose to leverage on this strategic approach so as to stay competitive in an unpredictable economy. In the coming years, companies will continue to face new sets of challenges and opportunities including more complex regulations and customer expectations for eco-friendly products. As such, in meeting these issues, the broad range of PLM technologies will continue to expand to encompass areas like social media, cloud computing and open source platforms.

CIMdata partitions the PLM market into the following primary segments: Tools

• Applications used to create, analyse and stimulate products and plants, and associated documentation • Examples: Mechanical Design Automation (MDA), Simulation and Analysis (S&A), Computer-Aided Software Engineering (CASE)

Collaborative Product Definition Management

• Manages product or plant definition lifecycle • Examples: Compressive Technology Suppliers, Focused Application Suppliers

Digital Manufacturing

• Supports simulation and analysis of the processes and manufacturing environments used to produce a product

Despite 2008 being a record year for the PLM market, there had been a decline in PLM investments growth due to the global recession in 2009. Although the market has not yet recovered, the uprising trend is earlier than expected. Coming out of the recession, many companies are investing in PLM possibly due to a delayed funding of projects that were previously approved.

Enquiry No. 5201 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

39

software&Metrology

of resource. For instance, a certain plant in a brewing company’s rising energy costs became a problem, evidently shown in the impact on production costs. In spite of implementing production optimisation measures, energy efficiency still suffered due to constant machine breakdown, lack of spare part tracking and insufficient fault diagnostics.

By implementing an integrated MES solution and control-system solution, the plant can achieve reductions in machine downtime and gains in productivity.

Restrained Growth From 2010 Onwards However, since MES has bundled functionalities, MES providers face competition from participants with extended functionalities and homegrown solutions. It is anticipated that there will be a restrained growth for MES from end 2010 onwards.

This is partly because end-users gradually transit to Commercial-Off-The Shelf (COTS) pre-integrated solutions offered by system integrators and niche solution providers. In turn, system integrators are capitalising the market potential by developing in-house solutions targeting niche customers. Moreover, MES solution providers and system integrators may work together to enter markets that were previously out of reach for them.

One emerging trend is the convergence of MES with solutions like Product Life Management (PLM), compliant and quality management, and warehouse management on unified platforms to reduce complexity while driving performance-based reliability. It is expected that the transition of market to pre-customised solutions with extended interfaces will bolster growth for MES markets.

Enquiry No. 5202 Turn to page 80a or log on to www.equipment-news.com to enquire

40

metalworking equipment news Jul-Aug 2012

www.equipment-news.com

Localising To The Customer’s Needs Due to its complexity and variety, it is recommended that MES software to be custom-configured for specific Linda Mei, Indonesia manufacturing situations. For example, a MES software package for an electronics maker would not be the same for a canned food processing plant. The applications should be customised for the specific manufacturing steps needed inside a plant through add-ons, custom code and layered applications, depending on the requirements and vendors involved.

Therefore, selecting MES software requires a detailed analysis of capabilities and features. While some products provide operator instructions for each stage of production, other products provide finite scheduling, workflow management and quality analysis features.

Machine monitoring sensors and shop floor data collection terminals transmit production data from the factory floor to MES. This is made possible when supervisory control and data acquisition features are part of the MES software. In turn, softwarebased algorithms send real-time instructions to devices like a programmable logic controller (PLC).

Proper Schedule Of Tasks MES software can also be used to schedule tasks by facility, work entre, machine, and/ or employee skill set. Products that include planning features allow schedulers to load jobs against an organisation’s total production capacity.

Advanced Production Scheduling (ASP) offers finite scheduling options and a visual representation of projected workloads. Production Requirements Planning (PRP) and Material Requirement Planning (MRP) allow schedulers to define processes with multiple tasks. This way, MES software that integrates PRP and MRP with inventory management and procurement can generate a schedule that specifies when required materials should be ordered.

According to Solarsoft, in order to run the plants effectively, it is crucial for manufacturers to collect data from every piece of equipment in real time. When the company’s Mattec system is connected to all the machines in the plant, manufacturers are able to automate the collection of scrap counts and downtime reasons.

Likewise, Siemens Metals Technologies Simatic IT Production Suite enables production of the entire plant to be planned and monitored in real time. Stage-by-stage implementation is made easier with the modular structure of the MES. FlexNet Production from Apriso has combined MES capabilities and FlexNet applications. By adopting a platform-based approach, the software can reach across various manufacturing processes at various locations to offer unified integration of the product supply network. This is often called as Manufacturing Operations Management (MOM).

MES covers the complete gamut of production activities from order launch to finished goods. Using current data from the shop floor activities, this helps in rapid response, thereby reducing waste and errors. As such, the deep focus on the plant floor has made manufacturer look upon MES as a competitive edge rather than a technology investment.

The scope of MES tools may drive process improvements and optimisation efforts pertaining to resources and equipment. However, data analysis tools as such may also drive regulatory compliance in industries that require detailed record keeping for traceability. MEN

Enquiry No. 5203 Turn to page 80a or log on to www.equipment-news.com to enquire

We have a wide range of advertisement positions and special promotional packages to cater to your marketing efforts.

Country SINGAPORE Malaysia Thailand Indonesia Vietnam Others

Readers 5,369 5,242 3,917 3,620 1,822 3,358

eMedia Circulation

23,328 Industry Professionals Country SINGAPORE Malaysia Indonesia Thailand Vietnam Others

Readers 2,391 1,484 1,538 1,927 1,063 1,147

BPA* Certified Readers

9,550

Know your numbers, Know your reach, Channel your resources to where it matters, to the people you target

+BONUS DISTRIBUTION

ASIA PACIFIC METALW ORKING EQUIPM ENT NEWS

July -

www.e

quipm

Aug 2012

ent-ne

ws.com

VOL. 26

H ea Using Aco r Me O ustics For u Inspection t Grinding Out Res Software ults In Cylindr Programs Del

APMEN

NO. 5 JULY T 2012

- AUGUS

Gets In Your Face! http://www.facebook.com/apmen

ical Grinding iver

M.I.C.A.

MetaltecEvent Review:

(P) No.

h 2012 Executive Mid Year Zon Reporte:

2012 •

098/06/ ) • ISSN

2012 (022818

PPS 840/09/

APMEN

0129 5519

Visit Our FC JulAug

Marcell Marra, SJ Campos

Advertise with us today!!!

2012 DMG-M

Website

S.indd

3

Robots:

Strong A rm

Tactics

Medical September Manufact 12 – 14, g 2012 • urin Sunte Asia

c, Singapore

7/12/12

9:48 AM

Read APMEN wherever you want.

Now compatible with the iPad For more information, please contact:

apmen@epl.com.sg

Tel: (65) 6379 2888 Fax: (65) 6379 2805

www.equipment-news.com

software&Metrology

www.equipment-news.com

Maximising Availability For Better Productivity

Coupling shop management software with a tool-vending unit pushes productivity to a new level.

By Raoul Rapke, director CTMS Division, IMC Group

I

ndustrial vending has been around for over 20 years.

However, it only took off in a big way in the US in the past seven years or so, and has since spread to Europe, South America and Asia Pacific. As multi-nationals diversify their geographic manufacturing base, a host of best practices migrate across borders, including the vending of cutting tools to the shop floor.

To better understand the growth of this phenomenon, we should look at both the sellers and buyers of cutting tools, and how their respective interests are served.

Sellers, and in particular distributors and integrators, are keen to provide customers with easy and reliable access to their 42

metalworking equipment news Jul-Aug 2012

products, as a guarantee of return business and to explore growth opportunities. A vending machine on the shop floor stabilises the business relationship with the target customer and can ward off predator suppliers who still deliver in the traditional, less convenient method.

Buyers are looking to maximise availability of tools so their production does not stop. They also want to minimise cost and risk of ownership of stock, by optimising stock levels or leaving ownership with the supplier through consignment arrangements.

Gaining In Popularity In the last few years, we have seen an exponential growth in the vending business, with some of the

major players investing heavily in new equipment installations.

The ROI is estimated to be 6 to 18 months with data showing that vending based distribution returns double the growth rate of non-vending based business.

The type of systems in the market var y from the basic helix style machines for simple vending and replenishment tasks, to the high end systems that provide full control over hundreds of stock items in one unit, coupled with powerful tool management software.

The latter is particularly attractive to more advanced users and the medium-to-large customers, seeking a range of functionality, flexibility and reporting, not offered by the basic machines.

software&metrology

www.equipment-news.com

The indirect costs and risk of inefficient tool management are unacceptable.

Recent Advancements Although predictability is a key factor in ensuring availability, the newer software packages offer clever tools that allow users to customise stock levels for items that are used infrequently. This can be done by overriding the calculated minimum stock level, or inputting changes in relevant parameters like frequency, usage and lead time, that

will automatically generate changes to the calculated minimum stock level. Changes can be effected on the spot, rather than waiting for a weekly or month end process, so the system is always up to date.

There have also been advances in a range of other areas that make these new generation systems intelligent. It is of vital importance that only the right tool is selected for a job. While the bill of materials may designate the cutting tools, to be sure that this is respected, a limitation can be defined in the software, so that at the time of issue, the user is required to input the part number, after which only those tools authorised for use will be available.

The issue of items based on cost centres, like a part, has other important implications. It allows production planners and shop floor managers to track the ‘real’ cost per unit, rather than basing decisions on a theoretical cost.

When interfaced with the customer’s ERP, production batch data can be imported, and the software not only presents the CPU data, but can also report deviations from a benchmark CPU. In this way, changes in tool life, due to the cutting tool, coolant management, machining parameters or maintenance, can be identified and corrected in a timely fashion.

As customers look for new ways to improve their productivity, the intelligent vending solutions that incorporate easy to use, yet sophisticated management software, will become more popular and gradually supersede the simple traditional systems that have been popular until now. MEN

ENQUIRY NO 004

A Thinking Vending Machine The high-end systems have a number of key advantages. The machines are based on drawers or carousel, with multiple individually locked bins per drawer or shelf.

Each bin can store a different stock item, suitable for a large variety but low-to-medium quantities. This facilitates broader management of stock, as many more items can be securely stored, and the issue of tools is controlled and monitored. Space is fully utilised, so less hardware is needed, keeping capital costs down.

The advances in software functionality also provide huge benefits to end users. First, the high-end systems deploy clever logistics algorithms to maximise availability of tools while minimising stock levels and obsolescence.

In a manufacturing environment, the importance of this cannot be understated.

Machine tools, which cost hundreds of thousands of dollars are chosen for their speed and performance. Suppliers compete for orders based on speed of delivery.

If the required cutting tools are not in stock, spindles are left idling and promised delivery dates are endangered. The indirect costs and risk of inefficient tool management are unacceptable.

Enquiry No. 5204 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news CBR_BRE_TCG_ｲﾝﾃﾞｯｸｯｽ広告版下_54x240_4c_英語版.indd

1 2011/11/01

43 16:26:22

software&Metrology

APMEN: HCL and Cisco have launched a joint Customer Experience Management (CEM) Lab. Tell us how the venture came about?

Stanimira Koleva (SK) MD, partner business group, Asia Pacific, Japan and Greater China, Cisco Systems: We have partnered with HCL for 16 years, so we see this as a new chapter in our partnership. If you look at us, we are a technology vendor that has been supplying network infrastructures and servers in the horizontal market. But now with IT increasingly running businesses, we have to be much more business-relevant.

I need to have a way to stay in touch with the business process.

Being an infrastructure provider, you do not have many options to do that unless you go into much tighter integration with applications with a player who has knowledge of that vertical domain.

Anubhav Saxena (AS) VP and global head, Marketing and Alliance, HCL Technologies: We are getting more proactive.

Instead of waiting for the customers, we are proactively identifying the need for changes that are happening in the market, ie: pre-integrating of solutions (eg: routers, smart grids and switches). We go to customers who are going through changes and ask if they want solutions from us. We are pre-integrating solutions in our labs so that the customers do not have to go through the pain of the integration happening over on their side.

Once you set this solution up, you have a reference architecture that works. As a result, you can replicate it, and you can become more successful as partners in the industry.

APMEN: Cloud computing — some might say the name is quite superficial. What is your 44

metalworking equipment news Jul-Aug 2012

www.equipment-news.com

Cloudy Issues

Explained Anubhav Saxena and Stanimira Koleva dispel some misconceptions on cloud computing. By Joson Ng

Anubhav Saxena

opinion on this and how would you define cloud computing in your organisation?

SK: Cloud is a combination of existing technologies, not necessarily a new technology. Cloud computing became possible because of advancements in the telecommunications sector allowing customers to

Stanimira Koleva

consume services remotely in a virtualised manner, and with much more flexibility.

To that end, we view cloud c o m p u t i n g m o re a s a n e w business model rather than a new technology. However, there are new capabilities we need to build within the technology in line with that model of delivery.

software&metrology

www.equipment-news.com

SK: One of the characteristics of cloud is its economy of scale. You can see for example customers who are more cost-conscious adopting cloud services more readily. SMEs kicked off that trend three to four years ago and you can see the market penetration today.

With the larger organisation, the picture is not so straightfor ward in terms of cost implications because what you need to keep in mind is the risk to the business, various regulations and governance that come into play. So it is probably dependent on each individual case, on how the services got implemented.

Also, the savings stem from the fact that you are minimising and managing the risk to the business in terms of much more availability during disaster recovery. Another point is the security you get around the data. All these have to be taken into account.

Cloud is a combination of existing technologies, not necessarily a new technology.

-Stanimira Koleva Now there is a business model on how IT gets consumed. Therefore, it starts presenting a completely different set of problems on the consumer side, to the extent that instead of integrating technologies, customers are looking at how to integrate services that are delivered through various vendors or from cloud to private, hybrid cloud.

It is really how we are changing the way we deliver technologies and services in line with the evolution of the business model, and the evolution of the process the customers are going through.

There is a lot of attractiveness in cloud. There is the availability and the flexibility. It is a great environment for us to make solutions widely available. We hope this is an environment that is going to underpin greater business efficiency.

AS: It is a new service delivery model.

It impacts business services and SLAs (Service Level Agreements).

Cloud computing on its own would not be the answer to CIOs (Chief Information Officers), but only a part of the answer.

I think the adoption of cloud will come in waves. The first wave will include the infrastructure applications, eg: e-mail, DNS (Domain Name System) and active directories. The reason why it (cloud) is cost competitive is because it leverages heavily on shared services; the basic foundation is that it can be shared across users, and has got all levels of security built in.

The second wave will be brought on by

applications like CRM (Customer Relationship Management) for example. Salesforce (a global enterprise software company) is doing well in this respect compared to its competitors because it has got cloud and APIs (Application Programming Interfaces) for easy integration.

However, there are some systems that would not work in a cloud. Enterprise Resource Planning (ERP) is one example because of the level of customisation required.

The level of localisation and centralisation is also very different.

So if someone tries to make ERP available as a service on a cloud platform, they would not be able to make it cost competitive. The level of customisation would not allow the sharing to take place.

AS: Ultimately, it comes down to the ability to put cash on the table. Would you want to build a data centre, or would you want to use existing technologies? This has become more of a financial decision today. The kind of rate of return you can get, based on other investments, versus putting the money into a data centre, will kill the business case of the data centre completely. MEN

APMEN: One of the advantages of cloud computing is widely believed to be cost savings. However, the skeptics are saying no, citing expensive monthly subscription fees. What are your thoughts on this?

Enquiry No. 5205 Turn to page 80a or log on to www.equipment-news.com to enquire

What Is Cloud Computing?

Providing software applications, data access and storage resources without users knowing the computing infrastructure, cloud computing is the delivery of computing as a service rather than a product. A network like the Internet usually supports it.

Advantages

Disadvantages

Reduce CAPEX

Service reliability

Increase competitiveness

Regulatory compliance

Increase flexibility

Security & privacy

Enquiry No. 5206 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

45

Sheet

www.equipment-news.com

MetalWorking

Watch Sheet Metal Designs

Unfold Michael E Neumann takes a quick look at what is available in the market today for sheet metal designing.

M

achining and designing a normal metal part typically involves a machine tool and CA D/CAM software programs. When it comes to sheet metal, it is a whole new ball game altogether. There is a complete range of machine tools specially designed for sheet metal fabrications. Bending, punching and even waterjet machines come into mind.

Sheet metalworking arguably r u n s o n it s ow n , w it h it s idiosyncrasies and machining intricacies. Even for designing, there are specialised sheet metal design suites or add-on options available for most CAD software programs.

According to a report titled

46

metalworking equipment news Jul-Aug 2012

‘Sheet Metal Industry In The US’, which can be found in Research and Markets, sheet metal demand in the US is forecast to cross US$20 billion by 2016. This suggests more sheet metal projects will be available and as a result, there will be more demand for competent software suites for the designing of sheet metal parts.

Software Programs Available With the race well and truly on to produce the authoritative sheet metal design software program for designers to transform what they have in mind to the drawing board, we take a look at what is available today.

• Unfolding & Flattening Radan is a CAD/CAM solutions

provider for the sheet metal industry. It develops solutions to design, manufacture and control production of sheet metal components and products.

One of its design solutions, Radan 3D, is a 3D modelling package for sheet metal design a nd engineering a ssembly modelling. T he modelling package provides an avenue to create 3D objects from 2D, allowing design flexibility at the same time.

W h ile it is di f f icu lt to visualise a bent part in its sheet metal form, useful features are found in software programs to ‘unfold’ parts, to allow designers to see or make modifications to their designs.

SheetMetalWorking

www.equipment-news.com

programming. The program combines a 3D mechanical design env ironment for creating parts and assemblies with design tools that enable engineers to focus on design function.

There is a complete range of machine tools specially designed for sheet metal fabrications

These unfold/fold functions are ver y important, or even essential. It helps to temporarily flatten bends in order to place certain features, such as cuts across bends.

Unfolding in the software is automatic and flexible.

In Radan’s solutions, parts can be unfolded directly and ready for onward processing.

The unfolder can flatten models, such as intersecting cylinders, producing complex profiles in the developed shape.

• Maximising Efficiency A not he r de si g n so f t w a re developer, Autodesk, has its sheet metal design environment in the form of Autodesk Inventor.

This sheet metal design tool

allows users to maximise their efficiency and cost savings.

Manufacturing engineers can tweak flat patterns to minimise engineering cost.

In addition, they can use the lofted f la nge comma nd to design transition shapes for press brakes fabrication of parts such as, hoppers, ducts and exhaust hoods. It is also possible to define a sheet metal punch library to standardise punch usage and reduce CNC tooling cost.

Another pertinent point to note in the software program is its design automation tools.

It works by basing mechanical relat ionships rat her t ha n geometric descriptions and constraints to achieve faster

• Simulation Prowess S o l i d E d g e S T4 a l l o w s simulation for sheet metal de sig ne rs. E n g i ne e rs c a n now test design ideas as they work. The program has made it easier to optimise designs with mesh refinements, more mid surface and assembly design capabilit ie s for improve d analysis, especially with sheet metal components. In addition, simulation can be used to analyse stress, strain, force, displacement and more.

• Combine Operations Lantek has developed its sheet metal and steelwork solutions for 2012. The Lantek Expert CAD/ CAM software now includes a manufacturing browser, which optimises the selection of tool options, while algorithms for automatic machining of multiparts and the 3D simulation of punching operations improves efficiency and clarity.

Automation with pre-nesting, nesting of kits of parts and the linking of a series of operation enables programming to be completed with one mouse click.

Whole sequences from importing CAD data to nesting, material selection, programming, and report generation can all be integrated into one operation.

Families of parts can now be automatically machined through parametric control, resulting in improved quality and increased productivity, while combination machines with milling capability are also supported in the new version. MEN Enquiry No. 5301 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

47

SheetMetalWorking

www.equipment-news.com

From

Design

To

Manufacturing

CAD technology for sheet metal allows the designing of sheet metal parts in an intuitive way, taking manufacturing constraints into account. By Samson Khaou, MD, Dassault Systèmes Asia Pacific South

C

an you imagine what it must have been like for our predecessors all those years ago when it came to designing anything from cars, ships to even buildings? CAD was a revelation for engineers and designers globally who now have the power to create virtually anything they can think of.

Undoubtedly, the economic importance of CAD is significant.

It is now applied in almost every industry including automotive, shipbuilding, aerospace, industrial and architectural design and prosthetics.

Better Manufacturing Starts In Design In the aerospace industry, CAD is used for multiple purposes with sheet-metal design being an important function. For example, Catia Aerospace Sheetmetal Design is a product used to define sheetmetal parts used in the aerospace industry (hydropressed or break-formed). It enables the capture of company 48

metalworking equipment news Jul-Aug 2012

knowledge, including design, and manufacturing constraints.

This solution is based on feature modelling techniques, using a predefined set of features used for sheet metal parts designed in the aerospace industry.

Based on both specificationdriven and generative approaches, this solution will allow typical hydro-formed aerospace parts to be specified, the system taking care of creating both 3D and flattened part geometry. Where such parts are designed or modified with basic modelling tools within hours or days, this solution allows the same result to be achieved in minutes.

The software program provides a function to design sheetmetal parts in an intuitive way, taking manufacturing constraints into account. It provides the flatpattern of the sheetmetal part, and allows easy incremental design (from

preliminary to detailed stages) and modification both in 3D and flattened conditions.

Whenever initial specifications are changed (eg: the aircraft skin on which a frame has been designed is modified), this product will allow a new part to be automatically rebuilt, based on the new specifications.

One aspect that significantly impacts aerospace sheetmetal design is the differential between the weight and centre of gravity from preliminary design to that during manufacturing.

To overcome this, the software program allows for the inspection and analysis of the weight of the different parts directly in 3D, with realistic physical properties. It is also possible to validate compliance regulations pertaining to weight criteria at the product level. MEN Enquiry No. 5302 Turn to page 80a or log on to www.equipment-news.com to enquire

4-6 October 2012 Saigon Exhibition & Convention Center (TT Trien lam Saigon) 799 Nguyen Van Linh Parkway, District 7 Ho Chi Minh City, Vietnam

True Technology for Metalworking Efciency. www.metalexvietnam.com

Vietnam’s Most Comprehensive Machine Tools and Metalworking Technology Exhibition

500 Global Brands, 25 Countries 10,000 Quality Buyers HI-TECH Zone with “Robot Demonstration” Conferences & Technology Presentations

Exhibit Prole: • Machine Tools and Machining Centers • Sheet Metalworking • Welding Technology • Factory Automation • Pump and Valve • Material Handling • Mold and Die • Wire, Tube, Cable Technology • Control Measurement • Tools and Tooling Special Feature: • Plastic & Rubber Manufacturing Machinery • Mold and Die Manufacturing Technology • Automotive Parts Manufacturing Machinery • Automation and Assembly Technology

Part of “METALEX,” the Largest Event in ASEAN

Reserve your exhibit space now and enjoy extensive branding opportunities!

For more info, please contact Tel: +66 2686 7299 E-mail: metalexvietnam@reedtradex.co.th

ENQUIRY NO 092

Local Partner:

Organized by :

Industry

www.equipment-news.com

Focus

Hear Me Out The use of acoustics in non-destructive testing and inspection promises to yield faster, more accurate results.

By Shahnawaz Abdul Hamid

F

or several years now, non-destructive testing or NDT has been used e x tensively in t he meta lwork ing sector, g iven its ability to detect flaws or a predominant metallurgical condition in a particular product or work piece, without impairing the said work piece’s future usability and usefulness.

As its name would suggest, the N DT te st proce ss doe s not result in changes to the structure or material of the test specimen itself. Therefore it will not inadvertently reduce the lifespan of the specimen during its operation.

NDT processes are common in quality assurance departments in manufacturing companies, where a sample of a particular batch may be inspected using NDT methods, to determine if it meets product requirements. A lternatively, defects in a particular piece of equipment, such as a boiler onboard a vessel or oil rig, can be sought and rectified using NDT.

50

metalworking equipment news Jul-Aug 2012

Artur Bienek, Poland

Rise In Popularity G iven t his, it come s a s no surprise that NDT has risen in popularity from its early, humble beginnings. According to a market report from BCC Research, the market value of technologies related to NDT in the US alone was US$2.5 billion in 2010. The same report also states that NDT techniques play a crucial role in manufacturing, with sales of NDT equipment estimated at US$422 million in 2010, and predicted to grow at a rate of seven percent per annum.

This rise in popularity has also brought the best minds in physics a nd eng ineering

to the sector, allowing NDT technologies to rise in stature, reaching new frontiers. One such technology that has developed re ce nt l y i s Acou st ic P u l se Reflectometry (APR), promising to reduce the time taken in de te c t i n g de fe c t s i n me t a l tubes and pipes in a particular piece of equipment, such as a heat exchanger, vis-Ă -vis other inspection methods.

Another technique within NDT that uses acoustics is Acoustics Emission (AE) analysis. This technique allows a qualitative and, under certain conditions, quantitative assessment of the integrity of the test part or structure, such as the chassis of a car, or the rotor of a helicopter.

Techniques Used Before delving into how exactly acoustic technology is used in such inspection and monitoring, let us briefly review the other techniques available in the world of NDT. Within the umbrella of NDT exists a wide range of techniques that serve a broad sp e c t r u m o f m e t a l wo rk i n g industries: marine, aerospace, defence and oil and gas.

Most of these techniques focus on using principles of physics such as electromagnetic radiation, acoustics and magnetism in churning out meaningful results for the tester. To achieve this, however, require s t hat t he right method be chosen for a particular application, given that some principles have little or no relevance to certain applications.

It may be early days, but it would not be far-fetched to suggest that acoustic technologies such as APR and AE will be making inroads into the world of metalworking inspection

Industryfocus

Here is a list of current available NDT techniques: • Penetrant Testing Uses a penetra nt solution (or dye) to determine cracks, porosity or other defects in the surface of the test specimen.

• Magnetic Particle Testing Magnetic flux leakages from a ferromagnetic test specimen highlight the presence of surface flaws and breakages.

• Ultrasonic Testing High frequency sound waves sent into the test material allow defects to be located.

• Eddy Current Testing Eddy currents generated from a coil located near the test specimen allow the user to detect surface and near-surface flaws.

• Radiographic Testing X-rays are used to produce images of objects using film or other radiation-sensitive detectors. Variations in radiation show the internal features of a test object.

The Science Of Acoustics The realm of acoustics often dea ls with the ma rr y ing of various scientific disciplines, including noise, vibration and wave behaviour. Primarily, one has to understand that sound is produced and propagated through the vibration of particles, whether through the air when people speak to each other, or through surfaces, from a vibrating piece of machinery for instance.

Depending on the frequency, and wavelength of the wave itself, sound waves react differently to changes in the environment in

which they travel. Some waves reflect off surfaces, while others bend around them. This probably explains why controlling noise is more art than science, with no one-size-fits-all solution.

Nevertheless, this unique property inherent in acoustic pulses gives APR a distinct advantage over other NDT methods when used in the inspection of tubes and pipes.

The technique uses acoustic pulses to detect faults such as leaks or holes in the tube or pipe wall, or bulging and constriction, often indicated by increases or decreases in the tube or pipe diameter.

Details Of APR The acoustic pulse is typically injected into a semi-infinite, straight-walled tube. Assuming the tube is free from defects, it should propagate down the tube without generating any reflections.

ENQUIRY NO 093

www.equipment-news.com

Jul-Aug 2012 metalworking equipment news

51

IndustryFocus

This can be confirmed through the use of a small microphone, positioned flushed with the tube wall, which should measure the pulse once only.

However, should the pulse encounter a discontinuity in the tube or pipe’s cross-section, a reflection is produced, and its amplitude and form studied to analyse the type of discontinuity e n co u n te r e d . G e n e r a l l y, a larger amplitude corresponds with a bigger discontinuity. A constriction creates a positive reflection, while a dilation or bulge creates a negative one.

Holes in tube walls, on the other hand, result in the subsequent ref lection hav ing a more complicated shape, affected by the hole’s size and radiation of sound energy to the outside of the tube.

Advantages There are several advantages that APR offers over other NDT methods. The biggest advantage it provides is the speed at which it inspects, given that it does not require the use of a traditional probe. Instead, the non-invasive nature of APR ensures that the measurement time of one particular tube can be reduced to as little as 10 seconds. Multiplied over the many hundreds of tubes and pipes a particular heat exchanger has, it The aerospace industry is one of several industries to have benefited from the use of NDT.

www.equipment-news.com

Acoustic emission analysis can be used in checking the integrity of welds in a particular structure.

Alexander Abolinsh, Latvia

is evident that much time can be saved from the use of APR. Given that APR does not use a probe in the inspection process, breakdowns are often few and far between. When tubes are not cleaned regularly, probes from other NDT methods, such as eddy current or magnetic flux leakage, are known to get stuck, adding to inspection time. Bends in the tubes and pipes also add to the complexity of inspection with probes.

A Short Word On AE Another NDT technique that uses acoustics is AE analysis. In AE, sensors are attached to the surface of parts or structures being monitored. These sensors

record ela stic sound waves caused by microscopic processes happening within the structure, such as cracks.

This allows the engineer an intimate look into part failure proce ss, w ithout hav ing to be pre sent t hroughout t he inspection. Subjecting the test specimen to multiple load cycles while these sensors are affixed to monitor AE also forms the basis for many safety inspections.

In particular, those within the metalworking industry can use AE to study the structural rigidity of welded joints, and recommend improvements based on their findings.

For all the benefits of AE and APR, it is clear that not everything in metalworking can be inspected using these two techniques. AE and APR serve a distinct, niche sector within metalworking, and it would be naïve to expect the companies that provide their services to detract from doing what they do best.

It may be early days yet, but it would not be far-fetched to suggest that acoustic technologies such as APR and AE will certainly be making inroads into the world of metalworking inspection, if they have not already. MEN Enquiry No. 5401 Turn to page 80a or log on to www.equipment-news.com to enquire

52

metalworking equipment news Jul-Aug 2012

David Jones, London, UK

Industryfocus

www.equipment-news.com

Touch Free Is Now

The

Perfect

Touch

It is time to change that default setting on the CMMs as the influence of non-contact metrology sweep into the traditional realm of tactile measurement.

By Michael E Neumann

A

cornerstone of metrology, the CMM has evolved with time and even as the basic set up of the equipment has largely been unchanged over the years, new developments are still available although they fundamentally exist as an ‘add-on’. These auxiliary attachments generally improve the whole system by bringing in new applications that open up new possibilities.

The adoption of these accessories not only makes the CMM more versatile, it also helps the age-old machine cross the threshold between contact and non-contact metrology. In today’s

Did You Know The CMM first appeared commercially in the 1960s

metalworking equipment news Jul-Aug 2012

world of metrology, the newly acquired versatility has high significance as advancements in electronics, computers and sensors have indirectly set the bar higher for manufacturing tolerances. This ultimately translates to a need for a more flexible CMM. Breaking New Grounds When mounted to a Bridge CMM, a laser scanning probe is suitable for situations where there is a need to inspect similar parts repeatedly. These probes, such as the ScanShark V4ix laser scanning probe by Brown & Sharpe works by laser triangulation according to the manufacturer.

Where multiple measurements on certain features are required u s i n g t a c t i l e p ro b e s , t h i s technique allows certain features to be measured in a single pass as typically a laser line consisting of several hundred points are reflected off the surface to the camera chip. On easy to dent

surfaces, this technology may be worth adopting.

Increasing Performance Attachments like laser scanning probes increase the CMM’s base of operation. However, CMM can be retrofitted with vision probes to magnify its range of accuracy as well.

The QVP Vision Probe from Mitutoyo brings functions to the CMM when it comes to measuring flat surfaces, elastic materials and small dimensions.

With its vision processing speed, the probe improves the total throughput time of inspection, thereby improving efficiency and cost effectiveness. According to the manufacturer, when used together with a CMM, the equipment can measure a hole less than 1 mm in diameter. This feature is typically out of range for traditional contact type probes. MEN Enquiry No. 5402 Turn to page 80a or log on to www.equipment-news.com to enquire

September 2011 metalworking equipment news

53

IndustryFocus

www.equipment-news.com

Case Study:

Arming

The QC Department

A Malaysian automobile producer brought in an extra pair of arms to improve their inspection process. Contributed

by Emily Tay, Faro Asia-Pacific.

A

common advice that many would dish out in the business world is ‘dream big, start small’. Indeed, it is a useful saying that is tried, tested and true. One such company that followed this path to success is Proton Holdings (Malaysia), part of the Proton Group.

Known as the ‘National Car Project’ in Malaysia, Proton started in May 1983. Today, the car manufacturer has close to 12,000 staff worldwide engaged in manufacturing, sales, service and other operations.

Much of the company’s success lies in the emphasis placed on pursuing its core values. It should therefore not come as a surprise that ‘quality’ is listed as the first building block of the company’s ability to achieve business excellence.

54

metalworking equipment news Jul-Aug 2012

Zulhasni Bin Abdul Rahim, senior executive (Group Quality — head of project for Quality Digitisation and Quality Metrology Innovation Program) of the company in the Shah Alam plant shared: “Our quality control procedures call for precise metrology in applications such as alignment, calibration, installation and most importantly, the inspection process. We are

glad that with portable solutions, we have been able to perform our quality checks with much more ease and efficiency.”

Variety In An Assembly The automotive manufacturing process typically takes the form of an assembly line, whereby auto parts of a large variety — different in size, shape and nature — are

On average, it used to take us up to four days to properly inspect one car unit.

Now, we only need two days to complete the entire task.

Mr Zulhasni on the usage of measuring arms

Industryfocus

www.equipment-news.com

fixed together to create the end product, a commercial car.

In ensuring product quality, the company performs routine checks by measuring the assortment of parts used. This includes car parts, stamping parts, plastic parts, as well as jigs that hold pieces in place while they were being worked on.

These parts range from a mere 200 mm to a full-sized car body approximately 3 m x 1.5 m x 2 m, with corresponding weights as light as few grams and as heavy as a few hundred kilograms.

It is not difficult to imagine how tedious and complicated the inspection process could get on the shop floor of an assembly line. In an interview with a group quality staff, the team revealed: “In the past, our inspectors used to rely on a host of conventional measuring tools.

This ranged from steel rulers and measuring tapes to taper gauges, micrometers, vernier calipers, and also a fixed CMM.” While these tools fulfilled the company’s measurement needs early on, customers’ growing expectations pushed the company to search for more advanced technology to meet new and higher requirements, especially on results consistency, accuracy, and time.

As demands for precision increased, Proton was gradually faced with issues concerning measurement consistencies. The company wanted to reduce the amount of time spent on inspection, as well as eliminate factors such as human and equipment error that was inherent with the usage of traditional hand tools. Fueled by a personal commitment to improve on quality, Mr Zulhasni and his team went in search for a viable solution.

Enhanced Efficiency & Capability I n late 2 0 0 8 , t he comp a ny purchased a set of Faro Laser ScanArm V3 and a set of FaroArm Platinum, for the QC Body and Jig

The company was able to deploy the measuring arm anywhere on the shop floor, whenever required.

Shop departments respectively.

These are portable CMMs that enable operators the liberty to perform accurate measurements right on the a ssembly line.

The measuring arm performs contact measurement by means of probing; while the scan arm has the additional ability to obtain scans of objects without making contact.

With the solutions, the car manufacturer achieved higher accuracy levels and repeatability during its inspection checks. It managed to achieve tighter tolerances, with an accuracy of 0.2 mm to 1 mm, for the entire range of measurement volume. The device offers portability and versatility, on top of its efficient and accurate scanning capabilities.

The company also enjoyed timeand manpower-savings with the implementation of the equipment, which boosted the company’s efficiency. “One portable CMM now replaces the multitude of conventional hand tools we used in the past,” said the project head.

“Coupled with the arm’s user friendliness, we have saved plenty of time. On average, it used to take us up to four days to properly inspect one car unit — from measuring, to inspecting and producing reports.

Now, we only need two days to complete the entire task.”

In addition, the manufacturer also managed to have manpowersavings on its inspection checks.

The company was able to deploy the measuring arm anywhere on the shop floor, whenever required.

This eliminated the need to move objects to a fixed machine, which saved the company time and labour. In fact, they managed to free some staff members for other tasks, requiring only one inspector for quality checks, instead of three or four in the past.

Return On Investment Due to a high frequency of use in the first two years, Proton managed to achieve full Return On Investment ( ROI ) in half the time that was originally expected.

“Based on our conservative calculations, we targeted to reach ROI at the end of three years,” indicated the project head.

“However, requests to utilise the FaroArm were coming from other departments in the company, as well as from external parties such as research units of the local universities. So with the measuring arm in operation for 75 percent of the time, we promptly realised a positive ROI within the first 18 months.” MEN Enquiry No. 5403 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

55

Executive

www.equipment-news.com

zone z

MidYear

Report As we cross the halfway mark of the year, it is a good time to take stock of the happenings in the first six months of 2012. In this special APMEN feature, we catch up with leaders of the metalworking industry to see how their company fared and what their plans are for the rest of the year.

Jean-Paul Dissous

President (Sales Area, Walter Asia Pacific) Walter Asia Pacific How would you rate your company’s performance (sales/overall growth) for the first half of the year? Is there a particular industry/country whereby your company did very well in?

Talking about Asia-Pacific, the first months of the year have shown a positive development compared to the previous year despite a slowdown in China’s economy. South Korea, Thailand and Japan have been the markets developing the most.

How would the rest of the year go?

We expect the second half of the year to b e e v e n b e t t e r. T h e automotive industr y in Far East has slowed down lately and needs to come back to higher

56

metalworking equipment news Jul-Aug 2012

levels of production as demand is still there.

What is the most significant news/product launch/ event that happened in your company in the first six months of the year?

Our latest innovation is the Tiger·tec Silver ISO P indexable insert range. With it, the average tool life improves by up to 75 percent compared to existing technologies. This is due to both the optimised microstructure of the Tiger·tec Silver coating and the geometries we introduced.

We also launched the Walter Titex XD70, the first solid carbide drill for drilling holes up to 70 times the diameter without pegging.

This increases productivity by up to 600 percent compared to the common gun drill technology.

Enquiry No. 5501 Turn to page 80a or log on to www.equipment-news.com to enquire

ExecutiveZone z

www.equipment-news.com

How would you rate your company’s performance (sales/ overall growth) for the first half of the year? Is there a particular industry/country whereby your company did very well in?

for ASEAN markets at the end of the year are the building blocks of our optimism.

What is the most significant news/product launch/event that happened in your company in the first six months of the year?

Dr Hans-Peter Laubscher MD (Asia Pacific) Trumpf

Trumpf will meet the challenging targets we defined last year. In 1. Set-up of a local laser marking Southeast Asia, Indonesia continues assembly to grow and Thailand remains a prospering market despite the flood 2. 20 th anniversary of Trumpf in Singapore situation. Finally, Vietnam has a chance to grow if financial and legal 3. TruLaser 1030 and TruPunch 3000 system in the country improves.

How would the rest of the year go?

4. Skeleton-Free-Processing as a significant measure to cut down cost and reduce waste as well as optimising the usage of energy with We are expecting moderate growth. a completely new approach.

New projects for Laser 3D application (cutting and welding) as well as a Enquiry No. 5502 number of new machines available Turn to page 80a or log on to www.equipment-news.com to enquire

Teo Tian Seng President GF AgieCharmilles (Southeast Asia)

How would you rate your company’s performance (sales/ overall growth) for the first half of the year? Is there a particular industry/country whereby your company did very well in?

Overall, the first half of this year could be very similar to the first half of last year. In South Asia, there were four countries that fared well (as of April 2012). They were Thailand, Indonesia, India,

and Vietnam. These are the four markets that will do well this year.

Thailand and Indonesia in particular, are the fastest growing with at least 25 percent growth year on year. These two countries have a certain resilience that saw them less badly hit by the Euro crisis. This could be due to a huge domestic demand in the automotive industry.

India is also strong, posting 20 to 25 percent growth in sales. The country suffered from currency fluctuation last year, which made the investment climate very unhealthy. The situation has since been corrected with the Rupee now stable. Finally, Vietnam will benefit due to its geographical location because many companies in China are now looking to develop a second base.

How would the rest of the year go?

If there is no other crisis, I believe this year will be a good year for us.

The second half of the year would be better than the first.

What is the most significant news/product launch/event that happened in your company in the first six months of the year?

We hosted an open house in Singapore at the end of April, during which we showcased several key products. One of them was the FO350mS machine, which was specially developed for IC mould making.

In addition, we launched a few new models. Some of them are high-tech machines produced in China. The price advantage brought about by producing in China can be transferred to our customers so they can benefit from lower investments.

Our China plants in Beijing (EDM machines) and Changzhou (milling machines) produce the ‘stable models’ already in serial manufacturing for the world. The European plants produce the very high end machines that are closely linked to on-going R&D. Enquiry No. 5503 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

57

ExecutiveZone z

www.equipment-news.com

How would you rate your company’s performance (sales/ overall growth) for the first half of the year? Is there a particular industry/country whereby your company did very well in?

Southeast Asia. Delcam will be announcing important new releases across our complete range of CAD/ CAM software in the coming months, which should help to produce even better sales.

Delcam has made a strong start to the year and is on track for a further growth in sales as the global economy continues its recovery.

Our subsidiaries in Indonesia and Thailand are continuing their growth but the fastest increase has come in Vietnam, albeit from a low base.

What is the most significant news/product launch/ event that happened in your company in the first six months of the year?

How would the rest of the year go?

We expect continued growth for the rest of the year, especially in

Klaus Ludwig

VP Hwacheon Machine Tool

The most important developments have been the addition of direct modelling to our PowerShape CAD software and the new Vortex strategy for rough machining in our PowerMill CAM software.

Even though Vortex is only in beta testing, with a full release some months away, we are getting very We just had our board meeting for the first quarter. So far I can say our international sales is more than what we had forecasted. We are currently about 15 percent above plan.

Surprisingly, in the first quarter, we received a lot of orders for bigger machines mainly from Europe and the US. It looks like in certain industries, there is a trend for bigger machines. We also have a strong increase in business in the mining and oil and gas industries.

As such, we would like to focus more on those growing industries in countries like Australia, England and the Middle East. Our large size turning centres like High-tech 550, 700 and 850 are enjoying good business right now.

How would the rest of the year go?

How would you rate your company’s performance (sales/ overall growth) for the first half of the year? Is there a particular industry/country whereby your company did very well in?

58

metalworking equipment news Jul-Aug 2012

I predict our international business unit would have a positive second quarter silmilar to the first one. I think the third and fourth quarters would be even better. We do not foresee an overall slowdown; of course there would be slowdowns in

Peter Dickin Marketing Manager Delcam

positive feedback from testers who have seen significant reductions in machining times.

Enquiry No. 5504 Turn to page 80a or log on to www.equipment-news.com to enquire

certain industries, (eg: automobile sales going down in Europe) but positive economies can be seen in many areas. The overall situation is basically positive. We predict to achieve our positive sales forecast set last year plus up to 15 percent more.

What is the most significant news/product launch/event that happened in your company in the first six months of the year?

1. Smart machine with UA (Ultimate Automation).

2. SIRIUS UM, a smaller version to our SIRIUS UL+.

3. Our ATC solution for our VT 1150 Vertical Turning Centre.

4. Newly designed Hi-Tech 450 series, a Universal Turning Centre available in many variations, centre distance and spindle bore dimensions including Y-axis.

Enquiry No. 5505 Turn to page 80a or log on to www.equipment-news.com to enquire

ExecutiveZone z

www.equipment-news.com

Taveesak Srisuntisuk MD Hexagon Metrology (Thailand)

How would you rate your company’s performance (sales/ overall growth) for the first half of the year? Is there a particular industry/country whereby your company did very well in?

for the rest of 2012, especially in the automotive industry as it is Thailand’s master plan to achieve 1.6 - 1.8 million cars in these few years.

What is the most significant news/product launch/event that We are doing very well in H1 2012. happened in your company in Our sales are over 50 percent higher the first six months of the year? compared to the same period in H1 2011. This is the result from the Hexagon always invests in R&D flood disaster in Thailand at the end to develop our products in of 2011. The major industries we are terms of accuracy and speed. doing well in are the automotive and We introduced our silver series CMMs, which are both faster and electronic industries. more accurate. We launched it in a show in Bangkok in June. We How would the rest of the also launched the second version year go? of our Absolute Arm recently.

We are very confident of seeing Enquiry No. 5506 continued investment and growth Turn to page 80a or log on to www.equipment-news.com to enquire of sales. We did well in the South Korean market, which is responsible for a significant share. We believe it will further increase in the second half of 2012. (Figures based on DMG products only / Gildemeister group) How would the rest of the year go?

How would you rate your company’s performance (sales/ overall growth) for the first half of the year? Is there a particular industry/country whereby your company did very well in?

In Asia, we expect increasing sales revenues. Last year, the share of Asian markets in the overall order intake development for the Gildemeister group had grown again, reaching 19 percent in 2011. We expect to increase at the same level with respect to last year if there are no special projects coming because we have increased our forecast twice.

(Figures based on DMG products only / Gildemeister group)

We grew by € 508.9 million (US$630 million) in order intake last year compared to 2010, resulting in the best ever year for us in terms

What is the most significant news/product launch/event that happened in your company in the first six months of the year?

Dr Jens Hardenacke CEO DMG (Asia)

For innovations, the compact machining centre Milltap 700, our first joint development, and the Lasertec 65 Shape for five-axis milling combined with laser surface texturing, have been launched in the South Korean market at this year’s SIMTOS. Apar t from these Korea premieres, we extended our evolution series by bringing the DMU 80 evolution to the market, and launched the new Sprint 50 for high-speed turning with Twin work area concept and modular expansion options for six-sided complete machining with up to three turrets.

Also, we are planning several innovations for the monoBlock series and further extension of the eVo series coming towards the second half of the year. From Mori Seiki, we expect to have the new NLX4000 towards the end of the year.

Enquiry No. 5507 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

59

FeatureS

www.equipment-news.com

Thailand’s Automotive Industry Controls Its Welding Equipment & Consumables Market Rising eco consciousness could lower the demand for welding in the automotive industry. By Krishnan Ramanathan, research analyst, Frost & Sullivan

G

lobal automotive giants are recognising Thailand’s suitability as a R&D hub to manufacture fuel injection pumps, transmissions, anti-lock braking systems and central locking systems, bringing cheer to the local welding equipment and consumables market.

An analysis from Frost & Sullivan finds that the market earned revenues of US$293.0 million in 2010 and estimates this to reach US$450.0 million in 2017 at a compound annual growth rate of 6.3 percent.

The government offers exemptions on import duties and excise taxes on cars to attract investors; however, the current thrust on eco cars are likely to dampen the market for welding equipment. If pollution control enforcement becomes stricter or the manufacturing technology changes, auto companies will seek alternate manufacturing bases, taking business away from the welding equipment and consumables market.

Increasing energy costs can play a role in determining the demand for welding equipment and consumables. For instance, if the focus shifts to renewable sources of energy/power generation and automobiles are made to run on batteries, the demand for welding consumables will reduce.

Other Factors Apart from automotive, the oil and

60

metalworking equipment news Jul-Aug 2012

gas and construction industries will also influence the fortunes of the welding equipment and consumables market. The Thai government has been keen to introduce new technologies to accelerate industrialisation in the country. The welding equipment market will certainly be buoyed by its efforts but it still has several issues to address before it can make the most of the initiatives.

Investors will be aware that

sta ndardisation will not be possible in this market, since only appropriate equipment can be used for specific applications. Moreover, technological transfers will be bumpy as the local workforce lacks the skills to develop and use technologies.

Once measures are taken to regulate and ensure quality at several sites, investors will feel more confident about moving their manufacturing to Thailand, thereby boosting the local welding equipment market.

Enquiry No. 5601 Turn to page 80a or log on to www.equipment-news.com to enquire

Summary

Market Overview Welding Equipment and Consumables Market: Market Engineering Measurements, Thailand, 2010

Note: All figures are rounded. The base year is 2010. Source: Frost & Sullivan analysis

Thailand is home to several multinationals in the welding industry although most of them operate with Singapore or Malaysia as the base for the Southeast Asia region.

Construction remains the biggest end user sector in terms of revenues in the Thailand welding equipment market and accounts for close to 30 percent. As more developments take place in the industrial sector, the market for automated welding processes is likely to expand. MEN

Enquiry No. 5602

Turn to page 80a or log on to www.equipment-news.com to enquire

Making Parts

Airworthy

Philip MacKenzie, London, Middlesex, United Kingdom

Features

www.equipment-news.com

Augustine Quek investigates the various production processes in aerospace part manufacturing.

A

erospace manufacturing is a high technolog y industry that produces aircraft, guided missiles, space vehicles, aircraft engines, propulsion units, and related parts. Many companies produce technical tools and components such as spaceships and satellites.

Some known companies involved in space prog ra m s include Boeing, EADS, Lockheed Martin and Northrop Grumman.

Specialty materials such as aluminium alloys and titanium, tight tolerances and the emphasis o n p r e c i si o n a n d r e du ce d waste mean that planning and preparation are vital for every plane before it is made. Therefore, considerable forethought is an aspect of every precision part made in the aerospace industry.

An important stage in modern aerospace craft manufacturing is the design and modeling process using CAD and CAE software.

The aerospace industry in recent years have optimised on better de sig n comp osite pa r t s by improving the communication between CAD engineers and CAE analysts. As such, most software providers in this field concentrate o n br i n g i n g i nte g rat io n o f functions between design and analysis.

For example, if a CAE analyst adds changes to the design of a part to help it meet specifications, like adding a layer of fibre, that change is communicated back to the CAD system to propagate it throughout the design.

Therefore, software packages, such as FiberSIM from Vistagy, is integrated into a number of popular existing CAD and CAE systems, like Dassault Systèmes’ Catia, Siemens NX, and PTC’s Pro/E, with analysis integrated w ith pack a ge s from A nsys, MSC.Software, and Siemens NX Laminate Composites.

Next Stage — Production Micromachining of f lex ible, malleable workpieces used in aerospace craft are especially demanding, as the parts may be distor ted or be a ffected dimensionally in other ways.

Cutting, clamping, or applying force s in a ny way would induce and relieve stresses in unpredictable ways.

At tolerances measured in thousandths of an inch, many of these stress responses can be ignored. But at tolerances measured in ten-thousandths or less, these effects can be significant. Another problem involves large-volume insert use due to the materials involved. The resulting time spent indexing inserts can be a huge drain on productivity over time, especially machining productivity.

Better Techniques Available One example of improved holding tool is the QS Holding System.

Jul-Aug 2012 metalworking equipment news

61

Features

Its high precision coolant not only reduces setup and tool change times, but also improves chipbreaking and performance. Its wedge design allows manufacturers to remove and change inserts in seconds, with coolant pressure as low as 145 psi. The precision nozzles deliver accurate coolant flow, improving component quality and chipbreaking.

A machining technique, helical milling or ramping, can also increase productivity in aerospace applications. The technique uses milling tools rather than drills to more efficiently machine holes and pocket features on the curved and slanted plains common in many aerospace components.

By taking relatively light and fast cuts, the technique requires significantly less force and power compared with a drill. Many milling machines are now built for this purpose.

A ‘Sound’ Technique Ultrasonic machining is another r e ce n t i n n ov a t i o n fo r t h e machining of ceramic aerospace parts. It is a non-thermal, nonchemical and non- electrical machining process that leaves the chemical composition, material

www.equipment-news.com

Due to evolving aerospace standards in terms of traceability, aerospace companies are marking all strategic parts in line with the latest requirements

Umayr Sahlan Masud, Islamabad, Pakistan

microstructure and physical properties of the workpiece unchanged.

Ultrasonic machining operations use an abrasive slurry that flows between the workpiece and a vibrating tool. The mechanical high-frequency (~20 KHz) vibration of the tool is produced from lowfrequency electrical signals, which are converted by a transducer.

A vibrating tool as small as 0.015 or 0.020 inches in diameter could be used to machine precise features

Machining of workpieces used in aircraft are especially demanding, as the parts may be distorted or be affected dimensionally in many ways

Jean Scheijen, Maastricht, Limburg, Netherlands

62

metalworking equipment news Jul-Aug 2012

in very small, hard, ceramic parts.

The process is a little like milling and a little like grinding, but is ultimately different from both of these methods.

By rapidly oscillating the tool through a tightly controlled amplitude, the machine chisels the material away using microscopic impacts at the rate of tens of thousands of strikes per second.

Machining this way involves at least one parameter that is alien to other processes, because the tool is ‘tuned’ to find a stable oscillation frequency somewhere between 20,000 and 50,000 Hz. One such machine, being used by the National Aeronautics and Space Administration (NASA), is the Sauer ultrasonic five-axis machining centre from DMG/Mori Seiki. Because the machine has five axes, multiple faces can be accurately machined to produce novel chip structure designs that are space-efficient.

The ultrasonic machine tool is equipped with a 42,000-rpm spindle that accommodates a machining centre’s toolholder and cutting tool.

During ultrasonic material removal, the machine also holds an abrasive tool instead of a conventional vibrating tool.

Features

www.equipment-news.com

Ben Gaw, Richmond, BC, Canada

Ultrasonic machining is another recent innovation for the machining of ceramic aerospace parts.

Marking & Metrology D ue to e vol v i n g ae ro sp ace standards in terms of t r a c e a b i l i t y, a e r o s p a c e comp a n ie s a re ma rk i n g a l l strategic parts in line with the late st re qu ire me nt s, wh ich include conformed 2D marking.

A variety of methods exist for marking a part. Electrochemical etching met hods use a low volta ge cur rent to ma rk the object surface, a nd a re commonly used for low volume product runs. Ink jet printing uses small dots sprayed directly onto the surface, and produces high contra st ma rk s, but is not considered a permanent marking method. Lastly, the dot preen process is a percussive marking method, using changes in depth to create marks which can last throughout the part’s lifecycle.

A nother indispensible component in aerospace part manufacturing is part inspection and verification. Since aerospace components operate in severe conditions where part failure can be catastrophic, accurate and efficient tests are required

for critical parts during the manufacturing process.

For exa mple, la ser-ba sed measurements are used at the A380 final assembly site at JeanLuc L aga rdère in Toulouse, France. The final assembly of the aircraft involves different segments and parts, which are to be compared to one another.

Fou r la ser t rackers: t wo for the fuselage and two for t h e w i n g s a re i nte r t w i n e d and connected by a common coordinate system. T his a rra ngement a llows for the uniformness and mutual interchangeability of the laser trackers. These laser trackers can record data from a single set-up position on objects with a measurement volume of up to 80 m diameter, with an accuracy level of +/- 10 ppm (μm/m), at a measurement rate of up to 3,000 points per second.

A simplified Human-Machine Interface (HMI ) was used as this measurement system was integrated into the fuselage assembly process, controlled by the assembly workers. The HMI features automatic control and

target location, and on-screen result display for determining the correct part positioning.

The basic concept behind the assembly inspection method was to inspect the aircraft’s individual segments in relation to one another rather than to use the tools as a reference system, avoiding the whole issue of compounding tolerances.

The aerospace industry is a culmination of highly technical p ro du c t io n p ro ce s s e s a n d te ch nolog ica lly adva nce d materials being implemented to manufacture over 200,000 components to complete a n aircraft.

Manufacturing these components are both complex and costly, with everything, from the screws to the engine components having to meet stringent quality controls for safety. Therefore, better tools a nd machine s, with ever greater precision and efficiency will continue to be developed for the fast-growing aerospace industry. MEN Enquiry No. 5603 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

63

EVENTs&

www.equipment-news.com

exhibitions

Adding

Precise Value Precision engineering can be developed in tandem with the rise of high growth industries, which has propelled the shift towards complex and high volume, low mix manufacturing.

By Sherlyne Yong

Clockwise from top left: Tan Kai Hoe, Dr John Yong, Christian Mutter and Tan Hui Khim

T

he Precision Engineering Centre Of Innovation (PE COI) annual conference was held on May 16, 2012, at the Singapore Institute of Manufacturing Technology (SIMTech). Professionals spanning across various industries were invited to present trends and oppor tunities in precision engineering, to approximately 250 participants from 150 companies.

While the centre was created to help the local Precision Engineering (PE) industry innovate in terms of technology, manufacturing operations and business model, its recent focus is to help suppliers venture into high value growth sectors through localisation.

This includes industries such as oil and gas, medical technology,

64

metalworking equipment news Jul-Aug 2012

aerospace, and engineering design and operation.

According to Tan Kai Hoe, deputy chief executive at S P R I N G S i n g a p o re , t h e P E industr y contributes to 2.4 percent of Singapore’s GDP, and about nine percent of the total manufacturing output.

Meanwhile, Tan Hui Khim, director of Supplier Development, Precision Engineering, EDB, has added that while China remains a popular manufacturing nation, costs are increasing and OEMs are shifting to the ASEAN region.

With the depreciation of the Euro and US dollar, cost is no longer the main reason for foreign companies to invest in Asia. Instead, they are doing so due to the close location to growing markets.

Increasing Competitiveness The Economic Development Board (EDB) and SPRING Singapore aim to further the industry by helping SMEs to enter the high growth sectors, which have a compound annual growth rate of about 10 percent, said Dr John Yong, director of PE COI. These organisations are working with MNCs in analysing products that can be localised in Singapore. This includes products and modules that are either new to Singapore, or things that are integral to the end product, such as the type of machines, materials or finishing required.

Joint ventures between MNCs and local companies, or tie-ups with technical experts and the formation of consortiums are alternative ways of enhancing competitiveness. These, in addition to the training of workers (eg: WDA supported courses, seminars and conferences), will help enhance capabilities.

Bridging Gaps With increasing competition within the region, companies can enhance their offerings by focusing on a niche. On the whole, the industry is encouraged to move towards high mix, low volume manufacturing to remain competitive. This is due to the rise of complex manufacturing, and is especially relevant for Singapore as it is a major MRO hub in both Asia and the world.

Dr Moh Chong Tau, president and CEO of Makino Asia, shared that MNCs now require high value and knowledge and not just cost savings or cheap labour, which has led to a greater emphasis on skills and automation. Most OEMs would prefer to outsource manufacturing if possible as it is less costly. For this, they would require a components supplier with the relevant knowledge chain.

Addressing this, Mr Tan Hui Khim has also mentioned the gaps present between researchers,

EVENTs&exhibitions

www.equipment-news.com

Leaders in the high growth industries came together to share how manufacturing activities can be localised

manufacturers and suppliers. For instance, as researchers come up with a product blueprint and pass it down the supply chain, manufacturers have to work with suppliers to discuss the new product and technological know-how before the parts can be produced.

More synergy is required between researchers and suppliers to streamline the process, which can be achieved when suppliers increase their technical knowledge, and in turn, the ability to make recommendations on how to better the manufacture of a product. In this sense, suppliers are evolving to take on a larger role, by engaging in design for manufacturability and adding valuable input instead of purely producing the part.

Trends & Opportunities There are opportunities abound for both the manufacturing and MRO sector with the rise of high growth sectors that include the oil and gas, aerospace, and medical technology industries.

The oil and gas industry is large in Singapore, in which 70 percent of the world’s jack-up rigs and 50 percent of submersible drilling rigs are produced, and 70 percent of floating production storage and offloading vessels converted, as according to Mr Tan Hui Khim.

Some trends within the local landscape include the formation of tools, process, automation and

partnerships to create a higher value chain. This has led to intersecting and miniature flow- and wire-lines that support unmanned operations, the use of corrosion and wear resistance material (eg: laser cladding Inconel), and the adoption of innovative measurement and inspection methods.

For the aerospace industry, however, the MRO sector takes up a larger share of the market.

Meanwhile, manufacturing includes making various parts like engines, casings and bearing nuts.

According to Christian Mutter, business development director, Supply Chain Asia Pacific, RollsRoyce Singapore, the main goals for the local aerospace industry are strengthening the SMEs’ support to MNCs and localising aerospace manufacturing and MRO. It is pertinent to localise such activities as the growth of

aircraft fleet in the Asia Pacific region has shifted manufacturing efforts closer to home.

I n a d d i t i o n , M N C s a re conservative in making changes to mitigate risks, as high costs are involved for substandard performance. Instead, they tend to stick with existing suppliers on a long-term basis instead of qualifying new ones. As a result, the way forward lies in collaborating with existing suppliers and supporting their operations.

Many have touted localisation as a strategy to tap on the opportunities presented by the various high growth industries.

As complex manufacturing takes centre stage, suppliers must equip themselves with the technical knowledge in order to value add the supply chain.

Enquiry No. 5701 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

65

EVENTs&exhibitions

www.equipment-news.com

Event Review:

Metaltech 2012

T

he 18th edition of Metaltech took place in the Putra World Trade Centre (PWTC), Kuala Lumpur (KL), Malaysia. The fiveday event saw trade professionals from the metalworking, machinery and manufacturing industr y come together to source for the latest technology and services from related industries within the 30,000 sq m exhibition area (gross).

Launched by Yang Berhormat Dato’ Sri Mustapa Mohamed, minister of International Trade and Industry (MITI), this year’s event managed to attract some 1,500 local and international participating companies from 35 countries and three international pavilions from South Korea, Singapore and Taiwan.

According to the organiser, the estimated value of exhibits is worth some RM250 million (US$79.7 million) and they ranged from CAD/CAM systems, machine tools, cutting tools, metrology equipment and automation solutions, among others.

66

metalworking equipment news Jul-Aug 2012

Strong Growth In his opening speech, Yang Berhormat Dato’ Sri Mustapa Mohamed said the M&E industry is a key sector of Malaysia’s economy and the government’s long term objective is to make the country the regional production and distribution hub for high technology and specialised M&E product and services.

He also mentioned the government will continue to provide incentives to support the growth of the industry. This includes the granting of pioneer status with full tax exemption of statutory income for 10 years to M&E companies that qualify.

In conclusion, he gave the crowd his growth projection for the M&E industry. He said: “Our economic transformation program will generate many business opportunities for the industry. The manufacturing sector is targeted to grow by 5.6 percent annually throughout the rest of this decade and contribute to 28.5 percent of gross product by 2020.”

PWTC Kuala Lumpur, Malaysia May 15 – 19, 2012 Enquiry No. 5702 Turn to page 80a or log on to www.equipment-news.com to enquire

EVENTs&exhibitions

www.equipment-news.com

Malaysia Targets FDI Speakers from Malaysian Investment Development Authority (MIDA) and Malaysia External Trade Development Corporation (MATRADE) spoke with foreign visitors and exhibitors at Metaltech in a bid to make Malaysia an attractive country for investors.

Held on the sidelines of Metaltech, a networking session was organised to bring MIDA and MATRADE together with potential foreign investors at the show.

MIDA performs the following functions: they promote, evaluate, plan, and monitor.

The organisation helps in promoting the country by offering tax incentives in order to bring in FDI and assist in planning for various industrial development. They also assist companies to implement and operate projects.

At the talk, representatives from the organisations urged participants to take advantage of various incentives

offered. For example MIDA offers pioneer status, which can bring about income tax exemption ranging from 70 or 100 percent for a period of 5 or 10 years. They can also grant an investment tax allowance (60 or 100 percent on qualifying capital expenditure) for five years.

In addition, they allow import duty and sales tax exemption for raw material or components and machinery and equipment.

Finally they give out a reinvestment allowance, which is 60 percent of the qualifying capital expenditure for 15 consecutive years.

Enquiry No. 5703 Turn to page 80a or log on to www.equipment-news.com to enquire

Did You Know?

Malaysia experienced 5.1 percent of real GDP growth in 2011. Of which, manufacturing contributes 27.5 percent.

In Malaysia, there are:

400 mould and die companies 170 machining companies 300 metal stamping companies 70 metal casting foundries.

One-On-One With Albert Lai Asia Pacific Metalworking Equipment News (APMEN) spoke with Albert Lai, MD of Trade-Link Exhibition Services, to discuss Metaltech’s future as the organiser aims to bring more focus to the show. By Joson Ng work has started again. They are targeting the construction work to be completed by 2014. The earliest date for any shows to be held in the new venue is 2015.

APMEN: This year marks the first year that you are ‘flying solo’ with the absence of MTA Malaysia.

What are your thoughts on that?

Albert Lai (AL): Being independent provides us with the flexibility in our decision-making. That gives my team the opportunity to plan our operations, promotions and sales in ways we have never been able to do. In fact, we have managed to

successfully execute several plans for our promotion and exhibition management this year.

APMEN: In an interview last year, you mentioned there are plans to move the show to a new facility.

Any updates on that plan?

AL: The construction of the hall was supposed to start last year but it was put on hold and now construction

APMEN: Looking ahead, will there be any changes in 2013 in terms of show concept, attractions for visitors and the participation of various delegations?

AL: Yes, we have expanded our target audience to include related industries such as oil and gas, aerospace, medical/ pharmaceutical, marine/offshore as well as electrical and electronics.

The plan is to establish a larger database so we can bring in the right people, as there are a lot of exhibits Jul-Aug 2012 metalworking equipment news

67

EVENTs&exhibitions

in the exhibition that interest these groups as well.

Next year, we will identify those groups and cater a promotional program to invite them to the event.

On the other hand, we also need the exhibitors to cooperate with us. They have to inform us beforehand the type of machines they are exhibiting and what industries they are suitable for.

This way, targeted promotional campaigns can be planned to reach those people. Finally, we hope to work with the Malaysian Investment Development Authority (MIDA) to conduct conferences and seminars on investments.

www.equipment-news.com

Mr Lai aims to bring more focus to the show in 2013

APMEN: There were some notable absentees this year compared to 2011, with the likes of DMG/Mori Seiki and Makino opting to stay away. What are your plans to attract established machine tool builders?

AL: As we all know, the market economy plays a large part in this.

Major brands tend to enhance the show profile and we know that. As much as we would like all of them to be with us this year, it may not be the case as they might have other plans for their company. Nevertheless, we are in close contact with all of them to ensure that they do not miss out on the next edition of the show.

APMEN: This year saw international pavilions from Taiwan, Singapore, South Korea and China. Any plans to bring in other national pavilions next year?

AL: Yes, we are expanding our reach in Europe and the US by cooperating with agents in that region to create new pavilions. We are currently working on bringing a Germany and US group for next year. With 80 percent of our machines from overseas, we have shown that we are a show with internationality.

Enquiry No. 5704 Turn to page 80a or log on to www.equipment-news.com to enquire

68

metalworking equipment news Jul-Aug 2012

With some 80 percent of its exhibits from abroad, the show is one with internationality

ENQUIRY NO 130

EVENTs&exhibitions

C

CIMES 2012

On-Site Expert Consultation Services The event saw the launch of expert ‘ambulant’ service, which was provided by a panel of industry experts. They dispensed consultation services to exhibitors and buyers on a daily basis. Beijing Machine Tool Research Institute deputy chief engineer Sheng

Bohao, China Machine Quality Inspection Center director Zhao Qinzhi, Key Projects Office staff expert Feng Hutian and Chengdu Tooling Institute deputy director Zhao Bingzhen formed the panel of experts.

The event was not only an outsourcing platform, but also a suitable place for learning and sharing information. Based on past experiences and exhibitors’ demands, CIMES 2012 took the

IMES 2012 opened at the New China International Exhibition Center in Beijing on June 12, 2012. According to the organisers SinoMAC, CNMTC and Reed Exhibitions, the event covered an exhibition area of 120,000 sq m, with 1,300 exhibitors from 28 regions and countries including Hong Kong, Taiwan, US, Germany, Italy, UK, France, Switzerland, Japan, South Korea, Spain and Czech Republic, among others.

The five-day event received some 55,000 visitors from China and abroad, making it one of the most popular and influential machine events across the globe this year. As a result, the event attracted a full lineup of major players in the industry.

The machine tool industry in China has seen steady progress over the past two decades, with the worldwide highest machine tool consumption numbers in 10 consecutive years and an output value also ranking first in three consecutive years. Now China is the most vigorous machine market in the world, directly driving the boom of automotive, shipbuilding, aerospace and machine manufacturing industries.

Despite these achievements, there is still room for improvement in terms of high-end machine tools and brand image. In order to improve core competitiveness in productivity, reliability, and precision technology, as well as environmental protection, interactivity during the event was improved.

70

www.equipment-news.com

metalworking equipment news Jul-Aug 2012

Event Review:

lead in the industry by providing expert ‘ambulant’ service to give indepth technical and management analysis, and solutions for both exhibitors and buyers.

Apart from the service, the event also featured a number of conferences and technical seminars, including an International Forum on High-Quality and HighEnd Equipment Manufacturing, the China NC Machine Tool Industry Development Forum, a Military

EVENTs&exhibitions

www.equipment-news.com

CNC Machining Technology Seminar, the Aerospace Difficult-toMachine Materials and High-Speed Processing Application Seminar, a Smart and Green Manufacturing Summit as well as presentations of the latest products and technologies by more than 20 exhibitors.

Green Development A Focus According to the Chinese government’s 12th Five-Year Plan, high-end CNC machine tools will

be the foundation for aerospace, shipbuilding, automotives and power generating equipment manufacturing. Old technologies with high pollution and high-energy consumption are to be eliminated.

As an example, the aerospace industry will feature key parts of titanium alloy, high-strength durable materials, engineering ceramic, and other advanced hardto-machine materials. These new technologies put high demand on

high speed, precision, composites, and multi-axis gearing. With the launch of a renewable energy automotive strategy, demands are growing for high-speed, highefficiency CNC machines and flexible production lines.

All these key applications pose new challenges to the machine tool industry, and huge opportunities as well. The show invited top-notch players of the global industry to share green, innovative, smart ideas and drive the green development of the industry in China.

The 2012 edition of the show witnessed majority of exhibitors promoting the green concept.

For instance, DMG offered its universal turning machines, universal milling machines, and vertical milling centres that save space and energy and feature high efficiency and versatile functions.

GF AgieCharmilles launched its products through coordinated design in both Beijing and Switzerland. The products can improve efficiency and extend cutting mould life, providing an automatic solution to aerospace customers.

Stimulated by the increasingly segmented market demands, the organisers enhanced their Hosted Buyer program, by inviting not only 1,000 diamond-level buyers from domestic military, aerospace, automotive, shipbuilding, railway, power, metallurgic industries, but also visitor delegations from oversea trade associations and professional organisations from India, Thailand, Malaysia, Japan, and South Korea, who participated in the business matching program with local players.

New China International Exhibition Center Beijing, China June 12 –16, 2012 Enquiry No. 5705 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

71

EVENTs&exhibitions

www.equipment-news.com

Event Review:

Hannover Messe 2012

H

annover Messe 2012 showed measurable success even before it came off the starting block. Around 5,000 exhibitors from 69 countries were registered.

The exhibition space grew by two additional halls to more than 172,000 sq m. One highlight was the presence of Partner Country China with 500 exhibitors in around 9,000 sq m.

With its largest ever industrial presence at a foreign event, China demonstrated the importance of Hannover Messe as a barometer for the global economy.

“The perfect themes, greater international reach and satisfied exhibitors — everything was just right at this fair,” said Dr Wolfram von Fritsch, Deutsche Messe’s managing board chairman, at the closing of the fair. “More than 600 companies have already signed on for Hannover Messe 2013, and we look forward to filling up the entire exhibition centre in Hannover next year.”

The premiere of the IndustrialGreenTec flagship show also exceeded all expectations: some 120 exhibitors from 12 countries attended, with 80 percent coming to Hannover for the first time. IndustrialGreenTec celebrated the most successful launch of any new trade show in recent memory.

One visitor in four was interested in industrial environmental technologies.

Seven additional fairs also attracted visitor interest. They are Industrial Automation, Energy, MobiliTec, Digital Factory, 72

metalworking equipment news Jul-Aug 2012

Industrial Supply, CoilTechnica, Research & Technology and the Metropolitan Solutions exhibitor area. Alongside Hannover Messe, Promotion World, the trade show for promotional items and incentives, presented innovations from the promotional items sector. ‘greentelligence’ Focus The show scored full points with its ‘greentelligence’ theme and the IndustrialGreenTec trade show. ‘greentelligence’ encompassed a number of major messages: green technologies are driving business models and growth worldwide, and the industry has market-ready solutions for sustainable production that correspond to this theme — and are profitable, as well.

A Humming Economy Industry associations and exhibitors expressed equal satisfaction. “The

mood in the German machine and facilities engineering sector was exceptionally good. As a business barometer for mechanical engineering, the fair gave us a very optimistic feeling about the second half of 2012,” said Dr Hannes Hesse, director of the German Engineering Federation (VDMA).

Friedhelm Loh, president of the German Electrical and Electronic Manufacturers’ Association (ZVEI) went even further: “German innovative power is in high gear.

Whether in the exploding area of energy efficiency, or for renewable energies, smart cities or automation — German electrical engineering technologies are in demand everywhere.” According to a ZVEI survey, 93 percent of member companies expect earnings to continue to increase in 2012.

Enquiry No. 5706 Turn to page 80a or log on to www.equipment-news.com to enquire

EVENTs&exhibitions

www.equipment-news.com

Event Preview:

EuroBlech 2012

E

uroBlech is the world’s largest exhibition for the sheet metalworking industry. The event is a trend barometer for this industry sector. With this year’s theme being ‘For a sustainable future’, the event puts a special focus on energy efficient technology, environmentally friendly manufacturing processes and intelligent use of material.

Currently, a total of 1,340 exhibitors from 37 countries have booked their stands at the show, covering a net exhibition space of more than 84,000 sq m. This is an increase in floor space of more than six percent compared with the previous show.

“This thoroughly positive outlook for this year’s EuroBlech reflects a further recovery of the sheet metalworking industry; and it also shows that the industry sector is inspired by overall trends such as sustainability, awareness of resources, energy efficiency and mobility. Major developments

in sheet metal working focus upon lightweight construction, intelligent use of material, processing of hybrid structures as well as new applications o f e s t a b l i s h e d p ro d u c t i o n processes,” says Nicola Hamann, exhibition director of EuroBlech, on behalf of the organisers, Mack Brooks Exhibitions.

“Visitors to the exhibition can look forward to discovering a large number of machine demonstrations throughout the eight exhibition halls, as live presentation of machinery and systems is traditionally a major focus for participating companies at the show,” explains Ms Hamann.

International Appeal International attendance is, once again, high at this year’s exhibition.

Almost 48 percent of the companies come from outside Germany, with Italy, Turkey, China, Switzerland, the Netherlands and Spain being the biggest exhibitor countries after Germany.

The show will occupy halls 11 to 17 and 27 at the Hanover Exhibition Grounds. The exhibition profile represents the entire sheet metalworking technology chain: sheet metal, semi-finished and finished products, handling, separation, forming, flexible sheet metal working, joining, welding, surface treatment, processing of hybrid structures, tools, quality control, CAD/CAM systems and R&D.

Exhibition Grounds Hanover, Germany October 23 – 27, 2012 Enquiry No. 5707 Turn to page 80a or log on to www.equipment-news.com to enquire

Jul-Aug 2012 metalworking equipment news

73

EVENTs&exhibitions

www.equipment-news.com

Event Preview:

JIMTOF 2012

J

a p a n M a c h i n e To o l builders Association and To k y o B i g S i g h t h a v e announced the updated exhibition scale and number of exhibitors of the upcoming event JIMTOF 2012, to be held in Tokyo Big Sight from November 1 - 6, 2012.

The total number of booths is 5,082 (as of May 28, 2012), which is 118 booths more compared to the 2010 edition. Some 4,800 booths are taken up by domestic exhibitors whereas 282 booths are booked by foreign exhibitors, whose number currently stands at 75.

The 26 th edition of JIMTOF marks the 50th anniversary of the inaugural event, which was held in Osaka in 1962. Because machine tools and related products are producers’ goods that form the basis of all industry, it has historically attracted a large amount of attention from Japan and overseas due to its status as a mirror that reflects the technological level of the industrial nation of Japan.

Reaffirming its role as a showcase for technologies that will reshape the production floors of the future, the t r a d e s h o w ’s o r g a n i s e r i s approaching this year’s event with the following priorities.

They are actively encouraging participants to exhibit even 74

metalworking equipment news Jul-Aug 2012

more leading edge and new products than in the past.

Many exhibitors, particularly Japanese manufacturers, structure their product development schedules so that they can unveil or announce new offerings at the show, and the event is regarded as a one-stop venue for comparing various companies’ advanced machinery and products earlier than is possible elsewhere.

Conventions & Seminars The event also aims to play host to appealing conventions and seminars that offer meaningful experience for participants.

While product information will remain the primary reason that attendees visit JIMTOF, many have called on the event to incorporate appealing meetings and seminars.

For example, the subjects for the International Machine Tool Engineers Conference (IMEC), which introduces research findings concerning machine tools and related technologies along with forecasts of future trends, as well as lectures featuring noteworthy engineers and managers and exhibitor workshops, will serve to spark audience interest.

Foreign Visitors The organiser will also try to

create business-matching opportunities with a view toward world markets as overseas transactions account for an increasingly large share of many Japanese companies’ business.

As such, the show should play the role of creating new contacts with overseas exhibitors and attendees.

The number of attendees at recent JIMTOF events from China, Taiwan, South Korea, and other East Asian countries, where brisk economic growth is driving demand for capital investment, has been increasing. Attendance is expected to grow in the future as a result of the relaxation of Japanese entry requirements and revitalisation of air service between the region’s cities and Japan.

Tokyo Big Sight Tokyo, Japan November 1 – 6, 2012 Enquiry No. 5708 Turn to page 80a or log on to www.equipment-news.com to enquire

Product Finder

www.equipment-news.com

Aerotech: Non-Contact Direct-Drive Linear Air Bearing Stage

Ametek: Non-Contact Linear Displacement Transducer

The ABL1500 direct-drive linear air-bearing stage from Aerotech meets the needs of scanning and inspection applications with fully active pre-load, stiffness and geometric characteristics.

Its positioning tolerances exceed the capability of conventional ball-screw and mechanical-bearing systems. The non-contact design allows years of maintenance-free operation.

The stages are appropriate for critical applications in any industry that requires smooth and accurate linear motion to manufacture, test or inspect a product. These include semiconductor, data storage, medical and genome devices and industries requiring cleanroom operation.

A non - contact Linear Displacement Tra nsducer ( L DT ) from Ametek Automation and Process Technologies offers greater durability and consistency than traditional potentiometers.

The magnetostrictive technology of the Gemco 955 eBrik has no moving parts to wear out and does not exhibit problems common to linear potentiometers.

It is designed to provide accurate continuous position feedback when installed on automated factory and processing machinery. Industry applications include plastic injection moulding and extrusion equipment, tire and rubber and die casting among others.

The sensor offers field programmable zero and span settings, plus electronic diagnostic feedback transmitted through the analog output. It is accurate to Âą0.03 percent of stroke with repeatability to 0.001 percent.

Enquiry No. 5801 Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 5802 Turn to page 80a or log on to www.equipment-news.com to enquire

Electric Power SUHNER power tools - robust but handy. High torque and power. For stress-free, effortless working.

SUHNER Abrasive Expert AG P.O. Box CH–5201 Brugg Phone +41 (0)56 464 28 80 info.sae@suhner.com

Shanghai Tong Lee Hardware Pte Ltd. 200 Jalan Sultan #01-01 Textile Centre Singapore 199018 Phone (65) 6291 7288 (5 lines) sales@shanghaitonglee.com.sg

ENQUIRY NO 081

ENQUIRY NO 122

www.suhner.com

Jul-Aug 2012 metalworking equipment news

75

productfinder

www.equipment-news.com

HPMT: Anti Vibration Endmills

Komet Group: Chip-Breaking Topography For Drilling

The Noviano SE45DP range of endmill developed by HPMT is touted by the manufacturer to be anti vibration and anti noise. This is largely due to the anti vibration design on its variable index. Other features include wear and chipping resistance and longer tool life brought about by the PVD coating.

Finally, the endmill gives better surface finishing, higher cutting speeds and a high CNC repeatability within 0.01 mm. They are benefits attributed to the tool’s ability in edge grinding.

Enquiry No. 5803 Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 5805 Turn to page 80a or log on to www.equipment-news.com to enquire

Iscar: Economical Solution For High Feed Milling Applications

Krebs & Riedel: Fibre-Reinforced Composites Grinding Wheel Body

Isca r is e x pa nding the Helido family of milling tools by introducing the FF SOF cutters, designed for high feed milling operations. The cutters feature a cutting edge angle of 15 deg and can carry the standard double-sided inserts like the S845 SNMU/SNHU 13 and the ONMU/ONHU 05.

They combine the advantages of the design of the FeedMill tools with the effectiveness of the double-sided square and octagonal inserts. These cutters expand the application range of the above standard inserts by applying productive rough face milling with high metal removal rates.

The cutters are designed for machining most metalworking materials. They are available in face mill configurations in the diameter range of 63 to 100 mm, and have coolant holes directed to each individual insert pocket.

As a manufacturer of conventional as well as vitrified-bond CBN and diamond tools, K rebs & R iedel ha s obser ved a consistent demand over recent years for dressable, ultra-hard grinding tools.

Many factors have contributed to this development.

New materials such as powder-metallurgical steel and high-tensile coatings pose extreme challenges to conventional grinding tools. Tolerance zones are also becoming ever tighter, while there is pressure at the same time for shorter primary and secondary processing periods. The ultra-hard grinding tools, CBN and diamond, offer a much higher potential to reduce unit costs.

The body of a grinding wheel is also an essential component of a grinding wheel system. Wheel bodies made out of fibre-reinforced composites offer particular advantages for specialised usages. As well as a weight reduction of up to 70 percent, they also offer good attenuation and stability characteristics.

Enquiry No. 5804 Turn to page 80a or log on to www.equipment-news.com to enquire

76

Komet Group’s SOEX indexable insert topography is generally suitable for all steels, in particular for longchipping steel materials and stainless steels. Reliable removal of chips, even with high L/D ratios is achievable due to its chip formation.

The PVD coated BK8430 is an all-round cutting material. It is wear-resistant with a universal indexable insert for inner and outer cutting.

It is suitable for use in continuous drilling with KUB Quatron indexable drill with drilling depth 2×D, 3×D; deep hole continuous drilling with KUB Centron Powerline with drilling depth up to 9xD, and Easy Special (special tools).

metalworking equipment news Jul-Aug 2012

Enquiry No. 5806 Turn to page 80a or log on to www.equipment-news.com to enquire

productfinder

www.equipment-news.com

Lantek: Sheet Metal & Steelwork Solutions

Mitsubishi Electric: Wire EDM

Lantek’s 2012 versions of its CAD/CAM, management and ERP software for sheet metal and structural steelwork applications speed up daily tasks, increase productivity levels and enhance management transparency and efficiency.

The CA D/CA M softwa re now include s a manufacturing browser, which optimises the selection of tool options, while algorithms for the automatic machining of multi-parts and 3D simulation of punching operations improve efficiency and clarity.

For pipes and steelwork, the company has improved the way in which Lantek Flex3d links with CAD. Its customisable ribbon menus and advances in STEP, IGES, DSTV, CAM and XML interfaces make it easy to import pipe assemblies and work with 3D data.

Mitsubishi Electric has developed the Wire EDM MV Series with DMXS optimisation of WDM technolog y. The machine is equipped with a linear shaft motor and automatic wire threading with an annealing system over 300 mm on break point insertion.

Other functions and features include a precision finish circuit, which realises faster machining operation with improved power-supply performance of Rz3.5 µm/Ra0.45 µm with three cuts. The machine also offers easy operation with its natural user interface. It adjusts job schedule and inserts extra job including offset, speed and adaptive control setting.

Finally, its built-in long life system reduces power consumption, lowers running cost and in turn, offers energy saving for every machine shop.

Enquiry No. 5807 Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 5808 Turn to page 80a or log on to www.equipment-news.com to enquire

Quality excellence! heimatec® ASIA /PACIFIC Phone +65 8112 6550 Mail: kmoessmer@heimatec.com Web: www.heimatec.com

heimatec® GmbH GERMANY Phone +49 7843 94660 Mail: info@heimatec.de Web: www.heimatec.de

ENQUIRY NO 127

ENQUIRY NO 104

and

Jul-Aug 2012 metalworking equipment news

77

productfinder

www.equipment-news.com

Schaeffler: High Load Carrying Roller Bearings

TaeguTec: Minimising Down Time

Schaeffler is now offering a range of tapered roller bearings with its FAG tapered roller bearing series in X-life quality worldwide. Currently, 30 standard catalogue types of these tapered roller bearings are available in sizes with outside diameters of up to 635 mm.

Within the next two years, the company will increase the number of types to 120 including outside diameters up to 1,200 mm. This will cover the majority of industrial applications.

The roller bearings in X-life quality can achieve a reduction in frictional torque of up to 75 percent compared with conventional standard products.

According to the manufacturer, the tapered roller bearings can carry a minimum of 20 percent higher loads compared to any competitors’ product in the standard category.

The Drillrush by TaeguTec is a quick-change system cutting tool solution. A key enables simple head indexing with minimised down time and no further set up time. The clamping system provides accuracy and rigidity for all applications.

As a standard or specialised drilling, boring or chamfering solution, its strength lies in its flexibility as a tooling solution. Polished wide flutes allow smooth chip evacuation and high-hole accuracy while the PVD coated drill body means longer tool life.

The range of indexable diameters (10.0 - 19.99 mm) with drill bodies from 1.5XD, 3XD, 5XD and 8XD means consistent performance and high productivity even after multiple head indexing. A further innovation is the addition of twisted through coolant channels for optimal flute geometry.

Enquiry No. 5809 Turn to page 80a or log on to www.equipment-news.com to enquire

Siemens PLM: Better Decision Making In Product Development

Siemens PLM Software has released the Teamcenter 9, a PLM system that delivers solutions and enhancements across the portfolio in support of Siemens PLM Software’s HD-PLM vision. The system helps companies deliver complex products while maximising productivity and streamlining global operations.

The release adds an integrated systems engineering solution and tightens the integration across the unified architecture, so companies can make smarter decisions with better visibility into the impact of those decisions.

Enquiry No. 5810 Turn to page 80a or log on to www.equipment-news.com to enquire

78

metalworking equipment news Jul-Aug 2012

Enquiry No. 5811 Turn to page 80a or log on to www.equipment-news.com to enquire

Walter: Maximum Drilling Performance

The increase in performance that Tiger·tec Silver provides for milling and turning is now available for drilling. Walter has developed the Xtra·tec Insert Drill range indexable inserts made of the high-performance silver cutting material.

Tiger·tec Silver Performance is now available for drilled holes of up to 59 mm in diameter and drilling depths of up to 5xD as a standard, while drills for other diameters and depths are possible as special solutions.

The insert is subjected to a surface treatment of the aluminium oxide coating developed that minimises friction and ensures improved resistance to comb crack formation. This results in both higher cutting speeds, as well as further improvements to process reliability in comparison with standard CVD coatings.

Enquiry No. 5812 Turn to page 80a or log on to www.equipment-news.com to enquire

Exhibition Programmes

2012-2013

July

3–6 Eastpo 2012

SNIEC Shanghai, China intlsales@eastpo.net en.eastpo.net

3–6 MTA Vietnam

SECC Ho Chi Minh City SES mta@sesallworld.com www.mtavietnam.com

September 10 – 15 IMTS

McCormick Place Chicago, USA AMT@AMTonline.org www.imts.com

12 – 14 Medical Manufacturing Asia

Suntec Singapore Messe Dusseldorf mma@mda.com.sg www.medmanufacturing-asia.com

19 - 21 MTT Expo

Grand City Convex Surabaya, Indonesia ECMI info@mtt-indoneisa.com www.mtt-indonesia.com

October

4–6 Metalex Vietnam SECC Ho Chi Minh City, Vietnam Reed Tradex rtdx@reedtradex.co.th www.metalexvietnam.com

December

23 – 27 EuroBlech 2012

5–8 Manufacturing Indonesia 2012

Exhibition Grounds Hanover, Germany Mackbrooks Exhibition info@mackbrooks.co.uk www.euroblech.com

Jakarta Int'l Expo Kemayoran Jakarta, Indonesia PT Pamerindo www.pamerindo.com

November 1–6 JIMTOF 2012

2013 January

Tokyo Big Sight Tokyo, Japan JMTBA www.jimtof.org

24 – 30 Imtex 2013

Bangalore International Exhibition Centre Bangalore, India IMTMA imtma@imtma.in www.imtex.in

6 – 10 China International Industry Fair 2012 SNIEC Shanghai, China www.ciif-expo.com

February 20 - 23 Indometal

7–9 Indonesia Oil & Gas Expo 2012

Jakarta International Expo Kemayoran Jalarta, Indonesia Messe Dusseldorf (Asia) shirley@mda.com.sg www.indometal.net

Balikpapan Int'l Sport Arena Balikpapan, Indonesia Fireworks info@asiafireworks.com www.indonesiaoilgas.com

March

7 – 10 Indo Aerospace 2012 JIExpo Jakarta, Indonesia www.indoaerospace.com

21 – 24 Metalex

BITEC Bangkok, Thailand Reed Tradex metalex@reedtradex.co.th www.metalex.co.th

5 – 10 TIMTOS

TWTC, TWTC Nangang Taipei, Taiwan TAITRA timtos@taitra.org.tw www.timtos.com.tw

April

9 – 12 MTA 2013

Singapore Expo Singapore SES mta@sesallworld.com www.mta-asia.com

To be considered for inclusion in the The Editor (APMEN) Eastern Trade Media calendar of events, Lower Delta Road, EPL Building, #02-05, Singapore 169206 send details of event to: 1100 Email: josonng@epl.com.sg Tel: +65 63792888

www.equipment-news.com Jul-Aug 2012 metalworking equipment news

79

Advertising Index

www.equipment-news.com

Page No.

Enquiry No.

BYSTRONIC PTE LTD

03

129

CARL ZEISS S.E. ASIA

19

124

DEES HYDRAULIC INDUSTRIAL CO LTD

75

081

DELCAM PLC (INTERNATIONAL DIVISION)

05

036

EXXON MOBIL ASIA PACIFIC

15

123

FACTORY AUTOMATION TECHNOLOGY CO LTD

51

093

HAAS AUTOMATION INC

09

116

Advertiser

Manufacturers and advertisers that are featured in this issue will send you free information about their products and services. Fill up the Product Enquiry Form on-line at www.equipment-news.com.

ADVERTISING SALES OFFICES HEAD OFFICE SINGAPORE EASTERN TRADE MEDIA PTE LTD 1100 Lower Delta Road, EPL Building #02-05, Singapore 169206 Tel: 65-6379 2888 Fax: 65-6379 2805/2806 E-mail: apmen@epl.com.sg FOREIGN REPRESENTATIVES

80

HAIMER ASIA PACIFIC LTD

21

126

HEIMATEC GMBH

77

104

HPMT INDUSTRIES SDN BHD

31

042

ISCAR LTD

IFC

121

KAMO SEIKO CORP

43

004

KENNAMETAL INC

BC

128

MESSE DUSSELDORF ASIA PACIFIC PTE LTD

37

131

NATIONAL INSTRUMENTS

17

120

OPTICAL GAGING (S) pTE lTD

IBC

125

REED TRADEX COMPANY (METALEX VIETNAM 2012)

49

092

REED TRADEX COMPANY (METALEX THAILAND 2012)

69

130

SECO TOOLS (S.E.A) PTE LTD

01

065

suhner abrasive expert ag

75

122

TAEGUTEC CO

11

118

TAIWAN MACHINE TOOL AND ACCESSORY BUILDERS’ ASSOCIATION (TMBA)

33

076

TUNGALOY SINGAPORE (PTE) lTD

13

119

WALTER AG SINGAPORE PTE LTD

07

039

WIKUS-SAGENFABRIK WILHELM H. KULLMANN GMBH & CO KG

23

117

ZWCAD SOFTWARE CO LTD

77

127

metalworking equipment news Jul-Aug 2012

JAPAN Ted Asoshina Echo Japan Corporation Tel: 81-3-3263 5065 Fax: 81-3-3234 2064 E-mail: aso@echo-japan.co.jp

KOREA Young-Seoh Chinn Jes Media International Tel: 82-2-481 3411/3 Fax: 82-2-481 3414 E-mail: jesmedia@unitel.co.kr

SWITZERLAND Rene Bachmann Mediall SA Tel: 41-56-442 14 40 Fax: 41-56-442 27 77 E-mail: rb@mediall.ch

TAIWAN Robert Yu Worldwide Services Co., Ltd Tel: 886-4-2325 1784 Fax: 886-4-2325 2967 E-mail: sales@wwstaiwan.com

U. KINGDOM Eddie Kania Robert Horsfield Int'l Media Rep. Tel: 44-1663-750 242 Fax: 44-1663-750 973 E-mail: ekania@btopenworld.com

This index is provided as an additional service.

The publisher does not assume any liability for errors or omissions.

The closing date for placing advertisements is not less than FOUR WEEKS before the date of publication.

Please contact our nearest advertising office for more details.

www.equipment-news.com ENTER PRODUCT ENQUIRY NUMBER HERE FOR FAST INFORMATION !

YOUR READER REGISTRATION NO._ _________________________ Enquire online @ www.equipment-news.com or Complete and post to: Eastern Trade Media Pte Ltd, 1100 Lower Delta Road, EPL Building #02-05 Singapore 169206 or fax to: 65-6379 2806 (Singapore) To: The Manager, Circulation Department,

ASIA PACIFIC METALWORKING

No. 5 2012

The Engineering Journal For Manufacturing,Automation & Quality Control

From: (Surname)_____________________________________ (Given Name)_ ________________________________ Job Title:____________________________________________ Company:___________________________________________ Address:____________________________________________

Do you want to receive (continue to receive) Asia Pacific Metalworking Equipment News? ❑ YES / ❑ NO (Not valid without signature) Signature____________________ Date_ _________________

__________________________________________________

Country: __________________ Tel: ___________________ Fax:__________________ E-mail: ___________________

ENTER ENQUIRY NUMBER (S)

(Refer to Advertising Index for Advertisers’ enquiry numbers)

Note: This form must be duly completed and signed.______________ TYPES OF PRODUCTS TO BE PURCHASED IN THE NEXT 12 MONTHS ❍ Cutting Tools ❍ Machine Tools ❍ Software

❍ Metrology

❍ Others_____________

TYPE OF BUSINESS (Please ✔ ONE box only) Do you use METAL in your production/manufacturing process?

Do you use machine tools and related equipment?

Do you use automation systems & equipment?

❑ Yes ❑ Yes ❑ Yes

❑ No ❑ No ❑ No

YOUR METAL PROCESS USED ? (Please be specific) ❑ 300 ❑ 303 ❑ 306 ❑ 309 ❑ 315 ❑ 318

CNC Machining Milling Gear Cutting Grinding Stamping Shearing

❑ 321 ❑ 324 ❑ 301 ❑ 304 ❑ 307 ❑ 310

EDM/ECM Inspection/Measuring/Testing Design with CAD/CAM Drilling/Boring Tapping/Threading Lapping/Honing

❑ 313 ❑ 316 ❑ 319 ❑ 322 ❑ 302 ❑ 305

Forging Rolling Die Casting Welding Turning Coil Forming

❑ 308 ❑ 311 ❑ 314 ❑ 317 ❑ 320 ❑ 323

Broaching Plastic Moulding Pressworking Automated Assembly Beading Electroplating

❑ 350 Others (Please specify)_____________________________________________________________________________________________

YOUR BUSINESS ACTIVITY (Please be specific) ❑ 221 ❑ 150 ❑ 222 ❑ 120 ❑ 223 ❑ 122 ❑ 123

Basic Metal/Foundaries/Mills Electrical & Electronics production Telecommunications Equipment Manufacturing Aircraft maintenance/components mfg.

Dies & Moulds mfg.

Motor Vehicles Parts Shipbuilding

❑ 160 ❑ 180 ❑ 200 ❑ 224 ❑ 078

Design & Consultancy Services Govt bodies, Trade Assns, Exhibitions Cos. Agent/Distributor/Trader of Machine Tools & Accessories Mechanical, Fabrication and all other metal engineering works Others (Please specify)_____________________________________

JOB FUNCTION (Please be specific) ❑ 021 Senior & Middle Management ❑ 023 Maintenance Engineering ❑ 025 Research & Devt

❑ 028 Testing & Inspection ❑ 030 Sales & Marketing

❑ 022 Production Engineering ❑ 024 Quality Control/Assurance

❑ 026 Design Engineering ❑ 029 Purchasing/Sourcing

❑ 027 Others (Please specify)

Size of company ❑ 001 1 – 10

❑ 002 11 – 30

❑ 003 31 – 50

❑ 004 51 – 100

❑ 005 101+

www.equipment-news.com FAST PERSONAL COPY SUBSCRIPTION FORM INVEST $0.15 PER DAY IN TECHNICAL AND BUSINESS INFORMATION FOR YOUR CORPORATE STRATEGIES IN SOUTHEAST ASIA

Name: (Surname)_ ______________________________________ (Given Name)_ ___________________________ Company: _____________________________________________ Job Title:_________________________________ Address:__________________________________________________________________________________________ Country: ______________________________________________ Telephone No: _ __________________________ E-mail:_ _______________________________________________ Fax No:__________________________________ Signature ______________________________________________ SUBSCRIPTION RATES

Commencing from:

AIRMAIL (1 YEAR – EIGHT ISSUES)

■ *Singapore/Malaysia S$60.00

*(GST applicable)

■ Cheque/Bank draft - made payable to

Date____________________________________

Eastern Trade Media Pte Ltd

Year

Month

■ Asia Pacific/America/Europe/ Others S$100.00

■ Amex

■ Visa

■ Mastercard

Cardholder’s name

■ Telegraphic Transfer Payment

United Overseas Bank, Singapore Bank Code: 7375 Branch Code: 037 Account No.: 921-343-851-0 Company: Eastern Trade Media Pte Ltd

• Receipt will only be issued upon request!

Account Number

Security ID –

Expiry Date

Signature

TYPE OF BUSINESS (Please ✔ ONE box only) Do you use METAL in your production/manufacturing process?

Do you use machine tools and related equipment?

Do you use automation systems & equipment?

❑ Yes ❑ Yes ❑ Yes

❑ No ❑ No ❑ No

YOUR METAL PROCESS USED ? (Please be specific) ❑ 300 ❑ 303 ❑ 306 ❑ 309 ❑ 315 ❑ 318

CNC Machining Milling Gear Cutting Grinding Stamping Shearing

❑ 321 ❑ 324 ❑ 301 ❑ 304 ❑ 307 ❑ 310

EDM/ECM Inspection/Measuring/Testing Design with CAD/CAM Drilling/Boring Tapping/Threading Lapping/Honing

❑ 313 Forging ❑ 316 Rolling ❑ 319 Die Casting ❑ 322 Welding ❑ 302 Turning ❑ 305 Coil Forming

❑ 308 ❑ 311 ❑ 314 ❑ 317 ❑ 320 ❑ 323

Broaching Plastic Moulding Pressworking Automated Assembly Beading Electroplating

❑ 350 Others (Please specify)

YOUR BUSINESS ACTIVITY (Please be specific) ❑ 221 ❑ 150 ❑ 222 ❑ 120 ❑ 223 ❑ 122

Basic Metal/Foundaries/Mills Electrical & Electronics production Telecommunications Equipment Manufacturing Aircraft maintenance/components mfg.

Dies & Moulds mfg.

Motor Vehicles Parts

❑ 123 ❑ 160 ❑ 180 ❑ 200 ❑ 224 ❑ 078

Shipbuilding Design & Consultancy Services Govt bodies, Trade Assns, Exhibitions Cos. Agent/Distributor/Trader of Machine Tools & Accessories Mechanical, Fabrication and all other metal engineering works Others (Please specify)_____________________________________

JOB FUNCTION (Please be specific) ❑ 021 Senior & Middle Management ❑ 023 Maintenance Engineering ❑ 025 Research & Devt

❑ 028 Testing & Inspection ❑ 030 Sales & Marketing ❑ 027 Others (Please specify)

❑ 022 Production Engineering ❑ 024 Quality Control/Assurance

Send this Fast SUBSCRIPTION FORM to Circulation Department, Eastern Trade Media Pte Ltd 1100 Lower Delta Road, EPL Building #02-02, Singapore 169206 or Fax: 65-6379 2806 Note: This form must be duly completed and signed.

❑ 026 Design Engineering ❑ 029 Purchasing/Sourcing

rfu l Vi deo Algorithms

ONE MACHINE the TOOLS ALL Feeling pressure to do more in less time?

OGP SmartScope Flash CNC can help.

e Pow

Flash CNC automatically measures

fa ce Pro filing

many features, on many parts, in many

r Lase

r Su

industries. And it can measure in many ways — with video for edges, touch probe for hard-to-reach features, laser for surface scans,

gC ap abil ities

and micro-probes for delicate or

in ell od 3D M

malleable parts. With its selection of multiple sensors, Flash CNC lets you do more in a single setup on a single machine. And with

systems from the ‘200’ benchtop to te Fea tures

the expansive ‘1500’ with 1.5 meter

a lic De Mic r o f ro-probe

stage travel, there’s a SmartScope Flash CNC for your application. Take off

oRe ach Places

the pressure. Do more in less time — with SmartScope Flash CNC. To see how, go to www.ogpnet.com/ogpFlashSystems.jsp today.

-T ard Tou H r ch Probe fo

Optical Gaging (S) Pte Ltd

21 Tannery Road, Singapore 347733 Tel: 65 6741 8880 • Fax: 65 6741 8998 • E-mail: general@smartscope.com.sg

ENQUIRY NO 125

Singapore • Malaysia • Indonesia • India • Hong Kong • South China • Thailand Philippines • Vietnam • Taiwan • Australia • New Zealand • Middle East

WIN WITH WIDIA

How much would you pay for a perfect hole?

Not nearly as much as you think.

WIDIA VariDrill

tm

Best price-performance ratio.

• Applicable in almost every workpiece material.

• Available from 1,0 to 20,0 mm, from 3xD to 8xD. • With coolant or non-coolant.

•

To learn more about the unmatched benefits of WIDIA VariDrill,tm contact your local distributor or visit www.widia.com.

ENQUIRY NO 128

©2012 Kennametal Inc. l All rights reserved. l A-12-02818-EN