ADS_FES-v4.0

FIRE & EMERGENCY SERVICES

EQUIPMENT CATALOG VOLUME 4.0

OPERATIONAL EQUIPMENT & LOGISTICS SOLUTIONS 800.948.9433 • ADSINC.COM GSA Schedule Holder • Special Operational & FES Equipment TLS Programs • DOD Emall

Changing the way you think about Personal Protective Equipment.

Safety Products Honeywell Safety Products is one of the largest providers of personal protective equipment serving the fire service, electrical safety and general industrial worker segments. Our innovative products, integrated system solutions and services make life safer, more comfortable, more secure and more productive in every corner of our world.

Brands You Can Trust BW Technologies by Honeywell Gas Detection www.gasmonitors.com North by Honeywell Industrial Safety Products www.northsafety.com Salisbury by Honeywell Electrical Safety Products www.salisburybyhoneywell.com Morning Pride by Honeywell PRO-Warrington by Honeywell Ranger by Honeywell Servus by Honeywell American Firewear by Honeywell First Responder Products www.honeywellfirstresponder.com

OUR MISSION The ADS mission is to intensely focus on helping our clients increase their operational effectiveness, complete their missions and make this world a safer place. We achieve our mission by providing timely, cost effective operational equipment, supplies, and streamlined acquisition methods combined with innovative supply chain management and logistics solutions.

ADS has developed procedures that shorten the “logistics pipeline” to provide rapid response and the best possible value to our customers worldwide.

MORE FOCUS.

800.948.9433 • ADSINC.COM ADS OFFICE LOCATIONS • Worldwide Operations Center 621 Lynnhaven Parkway Suite 400 Virginia Beach, VA 23452

© 2011 ADS, Inc. The ADS logo is a registered trademark of ADS, Inc.

• San Diego, CA • Afghanistan • Bagram • Kabul • Kandahar

Photos courtesy of the Department of Defense

C0056 06/11

MORE SOLUTIONS. Fire & Emergency Services Tactical & Special Operations Homeland Defense & Security Maintenance, Repair & Operations (MRO) Medical Operations Expeditionary Operations Law Enforcement & Corrections Maritime Operations Defense & Security Contracting

OPERATIONAL EQUIPMENT AND LOGISTICS SOLUTIONS TO COMPLETE YOUR MISSION. When experienced and dedicated professionals, the most extensive selection of operational equipment in the industry, a broad range of contractual vehicles, advanced supply chain management and logistics solutions are brought together under one roof, the result is ADS, the industry-leading operational equipment solutions provider.

Year after year countless men and women in uniform rely on ADS to provide the solutions they require. ADS provides equipment, supply chain management and logistics support to DOD and Federal Agencies in support of homeland defense and homeland security. ADS also specializes in working with defense and security contractors as well as protective services organizations. In addition, our law enforcement and public safety division is focused on servicing state and local agencies. No matter what uniform you wear, our mission is to provide the specialized equipment and related services you need to complete your mission at home, in theater, or around the globe.

BOOTS ON THE GROUND With offices in Kabul, Bagram, & Kandahar, ADS is committed to being where our troops are.

ADS maintains boots on the ground in Afghanistan 365-days-a-year to meet with U.S. troops in theater and on the battlefield, ensuring they have access to the equipment they need on time and on target to complete their mission. ADS has also expanded its global footprint to meet the demands of all other Commander’s Areas of Responsibility including SOUTHCOM, PACOM, EUCOM, AFRICOM, and NORTHCOM. With representatives on every continent, ADS also services defense and security contractors and protective services organizations in theater as well as U.S. Partner Nations, foreign governments, military and law enforcement organizations.

ADSINC.COM/SOLUTIONS

FIRE & EMERGENCY SERVICES EQUIPMENT PROCUREMENT THROUGH THE FIRE & EMERGENCY SERVICES (FES) TLS PROGRAM Through the FES (TLS) Program, ADS provides total logistics support to supply the customers with fire and emergency services equipment which includes but not limited to: fire fighting, safety, rescue, environmental, HAZMAT, first responder, domestic preparedness, search and rescue and other emergency response equipment.

The FES TLS Program was designed by the Construction and Equipment Directorate of the Defense Logistics Agency (DLA) Troop Support to provide customers with responsive, high quality products at fair and reasonable prices.

Through this program DLA acts as the contractor to obtain the best value for the customer and allows organizations to efficiently acquire fire and emergency equipment by providing timely and cost effective support of commercial and commercially modified products as well as incidental services. All items available through this program fully comply with the Berry Amendment, Trade Agreements Act, and Buy American Act.

FES TLS ADVANTAGES: • Increased customer support while maintaining readiness amd sustainment • Reduces cost

• Promotes competition • Ensures specific product choice • Improves logistics response times

CONTACT ADS TODAY FOR MORE INFORMATION ABOUT FIRE & EMERGENCY SERVICES EQUIPMENT PROCUREMENT THROUGH THE FIRE AND EMERGENCY SERVICES TLS PROGRAM.

HOW DOES FES TLS WORK? Customer Registers with DLA Troop Support for FES TLS Program

Contact ADS with your list of requirements.

ADS will prepare a quote for the requested items.

Customer submits Order Request Form spreadsheet and funding for the requested items to DLA Troop Support.

DLA determines items to be within the scope of the Fire and Emergency Services TLS Contract DLA will compete the submission amongst the FES TLS Contract holders.

DLA evaluates and awards the submission to the appropriate FES TLS Vendor based on BEST VALUE. Awarded FES TLS Vendor(s) receives award notification from DLA and processes the order.

ADSINC.COM/TLS

ADS PROVIDES THE PERFECT COMBINATION OF UNPARALLELED EQUIPMENT AVAILABILITY AND STREAMLINED PROCUREMENT. From fire and emergency response equipment, to tactical and operational equipment, to our maintenance, repair and operations equipment, our broad spectrum of products and services eliminates the need to buy from multiple sources. ADS features a wide-range of contractual vehicles to make product acquisition as easy as possible. Our contractual vehicles are simple to use and each one has its own advantages dependent upon specific customer requirements.

MORE OPTIONS. FES Equipment TLS Program Special Operational Equipment TLS Program Multiple GSA Schedules DOD EMALL NSN Items in Stock, Ready for Delivery 8(a) & SDVOSB

In addition, ADS is a primary provider of NSN items for the Defense Logistics Agency (DLA). ADS supports the DLA and NSN purchases through our Special Operational Equipment TLS Contract providing access to hundreds of items in stock and ready to order through the National Stock System. ADS has streamlined the procurement process and can provide delivery of in-stock NSN items quickly and efficiently.

INTERNATIONAL CUSTOMERS ADS complies with all applicable United States export-control laws and regulations. We have the ability to apply for all necessary licenses required by the International Traffic in Arms Regulation (ITAR), the Export Administration Regulations (EAR), and Title 15, sections 730-774 of the Code of Federal Regulations (CFR) as promulgated and implemented by the Department of Commerce. ADS has established procedures and administrative support to aid our international customers in complying with these laws and regulations. This includes abiding by the export rules and regulations set forth by the various agencies of the United States Government.

ADSINC.COM/PROCUREMENT

MORE FORCE MULTIPLIERS. ISO 9001: 2008 Certified Supply Chain Management Kiting & Assembly Total Asset Visibility Warehousing & Inventory Management Product Research & Development

ADS IS TAKING SUPPLY CHAIN MANAGEMENT & LOGISTICS SOLUTIONS TO THE NEXT LEVEL ADS is more than just an equipment company, we provide a variety of supply chain management and logistics solutions including kiting and assembling, total asset visibility and warehousing. ADS owns and operates multiple logistics support facilities where we currently store and distribute equipment for a multitude of customers – and we do it according to their specific requirements. From individual equipment to large-scale requirements, we work directly with Program Managers and purchasing authorities to warehouse and maintain inventory levels that meet mission requirements.

With over 150,000 square feet of storage, kiting and assembly space, ADS continues to invest in programs, services and facilities that shorten the “logistics pipeline” for our customers and ensure the level of support they deserve and require. Our value-added services and dedicated logistics professionals serve as a force multiplier for our clients by eliminating the logistics support burden and allowing them to focus on their mission.

TOTAL ASSET VISIBILITY ADS is constantly refining and leveraging new technologies that benefit our customers. As a result, ADS has developed a Total Asset Visibility (TAV) software solution called SOLVS (Special Operational Logistics Visibility Solution). SOLVS is a secure web-based tool that enables funding and equipment requisition inventory accountability at individual and departmental levels.

SOLVS also provides transparent oversight of supply chain data pertinent to running an efficient, timely and profitable organization. Learn more at adsinc.com/solvs

ADSINC.COM/LOGISTICS

MORE RESOURCES. Online Catalogs Videos Contract, Product and Logistics Information Exclusive Industry Expert Reviews Dedicated Brand Pages News Feeds Event & Industry Information Listings

LEARN MORE, GET MORE: NEWS, INFORMATION, AND VIDEO

ADSINC.COM FEATURES: • Catalogs available for ordering, viewing, and download.

• Videos for products, programs, manufacturers, and more.

• Interactive access to catalogs and brochures • In-depth information on how to buy, contractual vehicles, products, and our innovative logistics solutions.

• Exclusive content from industry experts reviewing and educating about products, trends, and programs.

• Dedicated brand pages with manufacturer and product information.

• Military and industry news feeds.

• Up-to-date event and informational listings on trade shows, events, and industry developments.

FOLLOW US ONLINE: GET IN TOUCH, KEEP IN TOUCH facebook.com/adsinc twitter.com/adstactical youtube.com/adstactical

MORE EQUIPMENT.

NAVIGATING THE CATALOG ADSINC.COM

Manufacturer

Find manufacturers online quickly and easily: enter this address to visit the manufacturers page on adsinc.com.

Product manufacturers are labeled with their respective logos at the top right or left of each page.

TABLE OF CONTENTS Cases & Containers. . . . . . . . . . . . . . . . . . . . . . 13 Chem Bio & Detection. . . . . . . . . . . . . . . . . . . . . 17 Fire Suppression & Containment . . . . . . . . . . . 23 Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Lighting Equipment. . . . . . . . . . . . . . . . . . . . . . 39 Personal Protection. . . . . . . . . . . . . . . . . . . . . . 45

Categories & Sub-Categories

SCBA & Respiratory. . . . . . . . . . . . . . . . . . . . . . 59

Categories are displayed at the top of each page. Each category is divided into sub-categories in alphabetical order.

Tools & Instruments. . . . . . . . . . . . . . . . . . . . . . 73 Training Equipment. . . . . . . . . . . . . . . . . . . . . . 97 Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Product Name Product names are located above each listing.

Product Options & Part Numbers Product options, part numbers, and NSN’s are located at the bottom of each description.

Product Labels Product symbols identify special characteristics

CATALOG PRODUCT LABELS Look for these symbols next to products in this catalog to quickly identify important ordering options or special characteristics.

ADS EQUIPMENT CATALOGS View or order ADS catalogs online at adsinc.com/catalogs

Designated for the Army Rapid Fielding Initiative.

National Fire Protection Association Certified.

Products from this manufacturer are available from ADS through GSA.

• Operational Equipment Solutions Catalog • MARCORSYSCOM Equipment • Air Force Equipment • Fire & Emergency Services Equipment • Law Enforcement Equipment • MRO Equipment Solutions • Naval Operations Equipment • NSN Catalog • MultiCam™ Catalog • Clothing Systems Catalog

AUTHORIZED PROTECTIVE EYEWEAR LIST (APEL) APPROVED

Included on the PEO Soldier Authorized Protective Eyewear List.

See these products on YouTube at: youtube.com/adstactical Look for these symbols and enter the adress to visit the manufacturers page on adsinc.com

ONE TEAM, ONE VOICE. A UNIFIED VOICE FOR LEADERS IN THE TACTICAL AND OPERATIONAL EQUIPMENT INDUSTRY.

The Warrior Protection & Readiness Coalition (WPRC) was founded to create a unified voice of advocacy for the tactical and operational equipment needs of the warfighter. The WPRC is committed to ensuring that America service members train and fight with superior gear now and in the future.

To join the WPRC or to find out more about the benefits of membership, please visit WarriorProtection.net.

List of WPRC current members: ADS, Inc. Bates Footwear Benchmade Knife Company Bluewater Defense Brookwood Companies Incorporated Darn Tough Vermont DuPont

Duro Textiles, LLC Eye Safety Systems, Inc. Honeywell Insight Technology Inc. International Textile Group Inc. Leading Technology Composites, Inc. London Bridge Trading Company

Milliken & Company New Balance Athletic Shoe, Inc. Otis Technology Inc. Outdoor Research Pelican Products, Inc. Polartec, LLC Smith Optics

Surefire, LLC Tactical Holdings TenCate Protective Fabrics W.L. Gore & Associates, Inc. Wild Things Tactical Wiley X, Inc.

Š 2011 WPRC. The WPRC Logo is a trademark of WPRC. Photo courtesy of the Department of Defense.

F0229

3/11

CASES & CONTAINERS

Cases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Containers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

CATALOG PRODUCT LABELS Look for these symbols next to products in this catalog to quickly identify important ordering options or special characteristics.

Designated for the Army Rapid Fielding Initiative.

National Fire Protection Association Certified.

Products from this manufacturer are available from ADS through GSA. See these products on YouTube at: youtube.com/adstactical Look for these symbols and enter the adress to visit the manufacturers page on adsinc.com 13

CASES & CONTAINERS

adsinc.com pelican

Products from this manufacturer are available from ADS through GSA.

CUBE CASES

A

AVAILABLE IN THREE SIZES

CASES

Extra deep so you can layer foam or padded dividers (it’s like a split level condo for gear). Or empty it out and for large compartment. It has gorilla-sized handles: a man on each side with a double hand hold each to heave those heavy loads. Stackable for convenient storage. Includes an attached extension handle and mobility kit.

• Optional caster wheels and pull strap (0340 that has a fold down handle and casters included).

• Metal reinforced padlock protectors.

• Floats in saltwater with 220 lb. load.

• Easy open double throw latches.

• Automatic purge valve.

• Two person lift handles.

• Color: Black, Desert Tan, OD Green.

• Foam Options: With Foam, No Foam, With Padded Dividers.

Model

Item Number

18 x 18 x 18”

0340

20 x 20 x 20”

0350

24 x 24 x 24”

0370

A

1610 CASE

• Interior dimensions: 21.68” x 16.62” x 10.56”.

• Exterior dimensions: 24.71” x 19.58” x 11.93”.

• Color: Black, Desert Tan, OD Green.

• Foam Options: With Foam, No Foam, With Padded Dividers.

Model Item Number 1610 Case

B

1610

1650 CASE

• Interior dimensions: 29 x 17-7/8 x 10-1/2”.

• Exterior dimensions: 32-1/2 x 20-1/2 x 11-5/16”.

• Color: Black, Desert Tan, OD Green.

• Foam Options: With Foam, No Foam.

Model Item Number

B

1650 Case

C

C

1650

1440 TOP LOADER CASE

• Watertight, crushproof, and dust proof • Easy open Double Throw latches • Open cell core with solid wall design - strong, light weight • O-ring seal • Automatic Pressure Equalization Valve • Stainless Steel padlock protectors • Comfortable rubber over-molded handle • Pick N’ Pluck with convoluted lid foam • Optional personalized nameplate • Lifetime Guarantee of Excellence • Retractable extension handle • Strong polyurethane wheels with stainless steel bearings • Interior Dimensions: 17.10” x 7.50” x 16.00” • Exterior Dimensions 19.70” x 12.00” x 18.00” • Color: Black, Desert Tan, OD Green.

• Foam Options: With Foam, No Foam, With Padded Dividers.

Model Item Number 1440 Top Loader Case

E D

1440

D

1120 CASE

• • • •

Interior dimensions: 7-3/8 x 4-7/8 x 3-1/16”.

Exterior dimensions: 8-1/4 x 6-9/16 x 3-9/16”.

Color: Black, Desert Tan, OD Green.

Foam Options: With Foam, No Foam.

Model

Item Number

1120 Case

1120

E

1510 CARRY ON CASE

• Extended handle.

• FAA maximum carry on size.

• Transport wheels included.

• Interior dimensions: 19.7 x 11.0” x 7.6” • Exterior dimensions: 22.0 x 13.8 x 9.0” • Color: Black, Desert Tan, OD Green.

• Foam Options: With Foam, No Foam, With Padded Dividers.

Model Item Number 1510 Carry On Case

14

800.948.9433

1510

CASES & CONTAINERS

F

G

CASES

F

• • • • • • • • •

0500 TRANSPORT CASE Watertight, crushproof, and dust proof Optional Pallet Riser Kit Optional Caster Wheel Kit complete with brakes Easy open Double Throw latches Open cell core with solid wall design - strong, light weight O-ring seal Dual Integrated Automatic Pressure Equalization Valves Double wide grip fold down handles - makes lifting easy Stainless Steel hardware & padlock protectors

• • • • • • • • • •

Optional personalized nameplate Lifetime Guarantee of Excellence Lid is completely removable Store documents outside the case with our Document Container Can be inverted & used as a pallet with an airtight cover Fit two 0500 Cases per pallet, four when stacked Interior Dimensions: 34.95” x 18.45” x 25.25” Exterior Dimensions: 39.95” x 23.45” x 28.65” Color: Black.

Foam Options: With Foam, No Foam.

G

1690 TRANSPORT CASE

• Watertight, crushproof, & dust proof • Easy open Double Throw latches • Open cell core with solid wall design - strong, light weight • O-ring seal • Automatic Pressure Equalization Valve • Large 2-person fold down handles • Stainless steel padlock protectors • 3 level Pick N’ Pluck™ with convoluted lid foam • Optional personalized nameplate.

• Lifetime Guarantee of Excellence • Retractable extension handle • 4 strong polyurethane wheels with stainless steel bearings • Interior dimensions: 30.01” x 25.02” x 15.00” • Exterior dimensions: 33.36” x 28.44” x 18.23” • Color: Black, Desert Tan, OD Green.

• Foam Options: With Foam, No Foam, With Padded Dividers.

Model

Item Number

Model

Item Number

0500 Transport Case

0500

1690 Transport Case

1690

I H

MEDCHEST 8 DRAWER

• This fire retardant Hardigg medical chest is OD in color and allows you to pack whatever medical supplies you need.

• With the lid removed this case becomes an 8 drawer cabinet with the bottom drawer lockable, a Stainless Steal work surface is stowed inside for shipment.

• A pressure equalization valve and edge casters on one end of this case make for easy-access and mobility.

• The pressure equalization valve is proven to survive the Marine Corp. “Wash-Down Test”.

• Proudly Made in the USA. • Color: Olive Drab - Fire Retardant, Tan, Black.

Model Item Number Medchest 8 Drawer

I

H

472-MEDCHEST3-8D

J

MEDCHEST 7

• This rotationally molded, Fire Retardant, olive drab polyethylene trunk-style case with 8 Cubic Feet of space transports your supplies in a safe and secure manner.

• With outside dimensions of 33” x 21” x 20” (17” Base & 2” Lid) this waterproof, airtight and decontaminable case is lighter in weight than traditional wood trunks and will not dent and deform like aluminum style cases.

• With a removable lid, black cobalt hardware, comfort grip handles, a pressure equalization valve, 3x5 cardholder and edge casters, this case makes for easy access as well as mobility.

• Proudly Made in the USA. • Color: Olive Drab - Fire Retardant, Tan, Black.

J

MULTI LAPTOP CASE

Model

Item Number

• iM2975 Storm Case with custom foam designed to fit 8 laptop computers with accessories.

• Color: Olive Drab, Tan, Black.

Model Item Number

Medchest 7

472-MEDCHEST7

Multi Laptop Case

472-8-LAPTOP-IM

ISO 9001:2008 CERTIFIED | ADSINC.COM

15

CASES & CONTAINERS CONTAINERS

ALOKSAK BAGS

ELEMENT-PROOF STORAGE Clear resealable plastic 100% water/air/dust proof bags featuring our patented hermetic seal.

Model

Item Number

3 PACK aLOKSAK 5 X 4 bags

aLOK3-5x4

3 PACK aLOKSAK 4.5 X 7 bags

aLOK3-4x7

3 PACK aLOKSAK 6.75 X 6 bags

aLOK3-6x6

3 PACK aLOKSAK 6 X 12 bags

aLOK3-6x12

3 PACK aLOKSAK 9 X 6 bags

aLOK3-9x6

3 PACK aLOKSAK 12 X 12 bags

aLOK3-12x12

3 PACK aLOKSAK 13.75 x 11 bags

aLOK3-13.75x11

2 PACK aLOKSAK 12 X 44 bags

aLOK2-12x44

2 PACK aLOKSAK 12 X 48 bags

aLOK2-12x48

2 PACK aLOKSAK 16 X 24

aLOK2-16x24

2 PACK aLOKSAK 32 X 16

aLOK2-32x16

4 aLOKSAK sm bag assortment

aLOK4-SMP

4 aLOKSAK lg bag assortment

aLOK4-MP

Water, dust, humidity, and air are just some of the threats to the objects you value most. Certified waterproof to 200 ft/ 60 meters by Scuba Schools International Tested and Approved waterproof

by The Navy Experiment Diving Unit. Whether you need to protect important documents, preserve sensitive equipment or prevent the spread of liquids and odors, LOKSAK offers the most advanced, effective and affordable storage solutions anywhere.

A

A

ODOR BARRIER BAGS

Clear resealable plastic odor/water/air/dust proof bags.

B

Model

Item Number

3 PACK Odor barrier bags

OP3-9x10

3 PACK Odor barrier bags

OP3-12x20

2 PACK Odor barrier bags

OP2-28x20

B

SPLASHSAK DIPPER

Flat nylon pouch with waist belt and 2 6 x 6 aLOKSAK inside.

Model

Item Number

SPLASHSAK Dipper - Black

DFP-BK

SPLASHSAK Dipper - Blue

DFP-RG

SPLASHSAK Dipper - Teal

DFP-TL

SPLASHSAK Dipper - Red

DFP-RD

SPLASHSAK Dipper - Gold

DFP-GD

C

SPLASHSAK TERN

Flat nylon pouch with 2 9 x 6 aLOKSAK inside.

D

Model

Item Number

SPLASHSAK Tern - Black

TRN-BK

SPLASHSAK Tern - Blue

TRN-RG

C D

SPLASHSAK LIL’ DIPPER

Flat nylon pouch with safety hook and belt loops, and 2 aLOKSAK 5 x 4 inside.

16

800.948.9433

Model

Item Number

SPLASHSAK Lil’ Dipper - Black

LDMM-BK

CHEM BIO & DETECTION

Detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

CATALOG PRODUCT LABELS Look for these symbols next to products in this catalog to quickly identify important ordering options or special characteristics.

Designated for the Army Rapid Fielding Initiative.

National Fire Protection Association Certified.

Products from this manufacturer are available from ADS through GSA. See these products on YouTube at: youtube.com/adstactical Look for these symbols and enter the adress to visit the manufacturers page on adsinc.com 17

A

A B

DETECTION

CHEM BIO & DETECTION

Products from this manufacturer are available from ADS through GSA.

adsinc.com msa

• The HAZMATCAD™ Plus Chemical Agent Detector detects both chemical warfare agents and selected toxic industrial chemicals (TICs). Both units are ruggedly constructed, compact and lightweight. They are also extremely easy to use, requiring no prior training.

• Single key press begins automatic sampling and analysis.

Audible and visual alarm messages provide clear and simple alarm condition display. Offers self-diagnostic check during rapid warm-up, alphanumeric display with LED alarms and 8-12 hour operation with rechargeable lithium ion batteries.

• Vapor diffusion check source verifies system performance. RS 232 and IrDA communication ports store up to eight hours of data. The inlet design protects against dust and particulate. Kits include a battery charger, belt clip, two Sony long-life lithium ion rechargeable batteries, a waterproof carrying case, vapor check source and operating manual.

Model

Item Number

Nerve, Blister

10055094

Nerve, Blister, HCN

10055095

Nerve, Blister, Phosgen

10055096

Plus TIC, HCN, HALO, HYDR

10055097

B

C

D

HAZMATCAD™

SOLARIS™ MULTIGAS DETECTOR

• The Solaris™ Multigas Detector is an economical, 4-gas instrument providing simultaneous detection of CO, O2, H2S and combustible gas. It weighs less than 8 ounces, and has an IP 6/5 rating against liquid and dust ingress.

The Solaris Multigas Detector is powered with a rechargeable lithium ion battery that offers 14+ hours of continuous run time and fully recharges in less than 4 hours. Calibration is intuitive and is accomplished with the push of a single button. This auto calibration feature greatly simplifies calibration and reduces training needs. Other features include a world-class alarm system, an optional sampling pump and a 2-year all-inclusive warranty.

• Approvals and Standards: UL, CUL, CSA, ATEX, Australia (pending) and MSHA approved.

Model

Item Number

Solaris™ Multigas Detector

10048147

C

SIRIUS® MULTIGAS DETECTOR

• MSA’s own proprietary PID sensor design (patent-pending) provides users with excellent PID performance including humidity resistance, stable zero readings and fast response and clear times.

• Provides users outstanding multifunctional capabilities by integrating a high-performance PID (photoionization detector) sensor into a four-gas detector. Users are able to simultaneously monitor for volatile organic compounds (VOCs) with low vapor pressures while measuring for combustible, toxic and oxygendeficient atmospheres within one reliable, easy-to-use, durable unit.

• Approvals and Standards: UL, CSA (pending), ATEX (pending).

Model

Item Number

Sirius® Multigas Detector

10051141

SAFESITE® MULTI-THREAT WIRELESS DETECTION SYSTEM D

• MSA’s own proprietary PID sensor design (patent-pending) provides users with excellent PID performance including humidity resistance, stable zero readings and fast response and clear times.

• Provides users outstanding multifunctional capabilities by integrating a high-performance PID (photoionization detector) sensor into a four-gas detector. Users are able to simultaneously monitor for volatile organic compounds (VOCs) with low vapor pressures while measuring for combustible, toxic and oxygendeficient atmospheres within one reliable, easy-to-use, durable unit.

• Approvals and Standards: UL, CSA (pending), ATEX (pending).

Contact ADS for ordering information

18

800.948.9433

E

DRAEGER COLORMETRIC TUBES

Dräger-tubes for short-term measurements. Tried and tested a million times: Worldwide, the Dräger short-term detector tubes have proven to be a very cost-effective and reliable way for the measurement of gas. The short-term Dräger-tubes are employed either manually together with the Dräger accuro gas detection pump or automatically together with the pump accuro 2000 or the compact microprocessorcontrolled Quantimeter 1000. A great number of different gases and vapors can be measured by the short-term Dräger-tubes. These tubes are used e.g. for the determination of concentration peaks, the measurement of exposures in the inhalation area, the determination of possible leakages as well as for the analysis of air in sewers, shafts, tanks or other confined spaces.

• Please let your sales representative know the gas and concentration you are testing for.

E

DETECTION & PROTECTION

Model Please contact ADS for complete list of tubes available.

F

BIO-AGENT TEST KITS

Four simple steps are required to carry out the rapid test: The sample is taken, put into a buffer solution, dripped onto the wicking pad, and the result read off. The test can also be carried out easily with a chemical protection suit, because no additional pipette or reader is required. In only ten to fifteen minutes the test, when following all instructions, reliably detects biological hazardous substances. With high concentrations the result may be available in only three minutes.

Because the test requires no additional equipment, such as an evaluation device, it is a very cost-effective detection method without the need for a power supply. The measuring system does not respond to other “white powders” – e.g. flower or chalk or related bacteria.

The Bio-Agent Test is an affordable method for the detection of germs and toxins. With a swab for collecting the sample to be examined, the bottle with the buffer solution and the trickle device (dropper) and test strip the complete accessories required are normally on hand and do not require any maintenance. To be faster in an emergency, there is, in addition to the individual tests, a simultaneous test capable of detecting five parameters . There are also training sets to practice the handling of the test. The tests can be stored for two years at room temperature. Cooling is not required.

Model

Item Number

Bioagent test Anthrax (5 tests)

8103483

Botulinum (5 tests)

8103484

Ricin (5 tests)

8103487

SEB-Staphilococcal Enterotoxin B (5 tests)

8103488

Yersinia Pestis (5 tests)

8103489

Bioagent Simultest for all 5 agents (10 tests)

8103482

G

F

N95

Filter material CoolSAFETM to protect against solid and liquid nonvolatile particles. Odor version With additional active carbon layer against organic oders below the permissable exposure limit (PEL).

Approvals: NIOSH Individually packaged.

Model

Item Number

1750 N95 without valve

3951320

1750 N95 with exhalation valve

3951321

N95 OV Odor with Exhalation

3951322

1760 R95 with exhalation

3951326

H

CHEM BIO & DETECTION

adsinc.com draeger-safety

G

H

PARAT C

The PARAT C is a lightweight, portable easy to don smoke escape hood designed for self-rescue in the event of a fire. The PARAT C protects the wearer for a minimum of 15 minutes from smoke, carbon monoxide and toxic gases normally present during a fire. It is ideal as a personal escape device which can be used in emergency situations occurring in homes, office or apartment buildings, schools, hospitals, plant facilities and hotels.

Model

Item Number

PARAT C in black plastic case

R52818

PARAT C in soft yellow travelers pack

R53555

ISO 9001:2008 CERTIFIED | ADSINC.COM

19

CHEM BIO & DETECTION PROTECTION

adsinc.com trelleborg

TRELLCHEM VPS-FLASH

THE NEXT GENERATION OF FLASH PROTECTIVE HAZMAT SUITS Fully certified to NFPA 1991-2005 with Flash-Fire and Liquefied Gas Options; In a single-skin ensemble (no cover required) This unique reusable, single skin hazmat ensemble is made of a new patent pending garment material developed and produced by Trelleborg Protective Products. The material is a combination of specialized rubber and plastic laminates, which combine with a special woven fabric to for a strong and flexible material offering outstanding chemical flash fire & liquefied gas protection.

Additionally, this material exhibits excellent resistance to abrasion, punctures, tears and superior chemical resistance.

• Single-Skin Construction - No Over-Cover • Anti-fog lens (virtually eliminates all condensation!)

• Impact resistant hard visor that is curved for peripheral vision • Shelf-life effective until at least 2021 • Superior Neoprene closure • Contact ADS today for options and accessories.

• Bayonet cuff system for ease of glove assembly • Size: Small - XXX-Large • High-visibility orange color Model

Item Number

Trellchem VPS-Flash

47652009

A

B

C

B

TRELLCHEM VPS

• Fully certified to NFPA 19912005 without an over-cover.

• Superior abrasion, puncture & tear resistance.

• Optional Anti-fog lens (virtually eliminates all condensation!).

• Suit design conforms to body; doesn’t “puff out” like other Level A suits.

• Flame resistant without an over-cover.

• Shelf-life effective until at least 2021.

• Contact ADS today for options and accessories.

• Size: Small - XXX-Large • Entry: Front, Back

Model

Item Number

Trellchem VPS

47652003

C

TRELLCHEM NEO

The new Trellchem NEO ensemble is the lightest weight & most affordable NFPA 1991-2005 suit ever. With standard items such as the Trellchem Bayonet Cuff, available anti-fog lens & large impact resistant hard visor, this suit will become the new standard in affordable NFPA 1991-2005 certified garments. Key features of the Trellchem NEO suit include: • Certified to NFPA 1991-2005 • Trellchem Bayonet Cuff System • Lightest NFPA 1991 certified suit standard EVER – Just 9 lbs!

• Highly abrasion resistant material • No overcover required – Single Skin • Full 2-Yr warranty at no extra charge • Available Anti-Fog Shield • Size: Small - XXX-Large (upgrade required) • Available with Anti-Fog Lens • Large, Impact Resistant Visor

A

D

20

800.948.9433

TRELLCHEM EVO (HPS)

Model

Item Number

Trellchem NEO

47952001

The Trellchem EVO suit is the newest suit offering from Trellchem Protective Products. It is an upgrade of the previous HPS suit, and now includes a layer of Nomex embedded in the material to provide additional Chemical Flash Fire protection.

• Certified to NFPA 1991-2005 • Trellchem Bayonet Cuff System with Optional Chemical Flash Fire • Large, Impact Resistant Visor & Liquefied Gas • Highly abrasion resistant material • No overcover required – Single Skin • Fully repairable • Anti-Static resistance built • Full 2-Year warranty at no extra into material charge • Anti-Fog Shield • Color: Red • Trellchem Ventilation System • Size: Small - XXX-Large included

• Inflatable decontamination cabin for one person.

• Consists of inflatable flame, shower cabin, integrated pool, shower strip with 9 nozzles and water drainage.

• Can be erected & ready for use in seconds with a BA cylinder or a blower.

• Inflated: 6’7” x 6’7” x 8’3”.

• Packed: 2’ x 1’ x 1’6”.

• Weight: 100 lb.

• Water consumption: 25 liters per minute.

• Water connection: Geka Coupling.

• Material: Trellchem Super, Trellchem PVC

Model

Item Number

Model

Item Number

Trellchem EVO (HPS)

47752006

Trellchem Decon 100

482100001

D

TRELLCHEM DECON 100

CHEM BIO & DETECTION

Products from this manufacturer are available from ADS through GSA.

E CONTACT ADS TODAY TO ORDER RESPIRATOR OR SCBA ACCESSORIES AND COMMUNICATIONS SYSTEMS FROM MSA: • Respirator Spectacle Kits • Respirator Cartridges • ESP II® Communications • Portable Air Systems • Nightfighter™ Display Systems • And many more

PROTECTION

E

F

MILLENNIUM CBRN GAS MASK

Combines high performance, customized fit, comfort and cost efficiency in a version of the reliable militarystyle gas mask (MCU-2/P) used by the U.S. Air Force in Operation Desert Storm. A flexible, one-piece polyurethane lens with a wide field of vision is bonded to the durable Hycar rubber face piece. A drinking tube provides connection for fluid ingestion in contaminated atmospheres. An internal nose cup with two check valves deflects air from the lens and reduces fogging. A fully elastic, six-point head harness promotes easy on/off and adjustment, with no hair pulling. A standard mechanical speaking diaphragm is included, or MSA’s optional ESP® II communications system can be added. A butyl-coated nylon hood is available for total head protection. The dual-canister mount allows weapon sighting from either shoulder. The CBRN canister contains chemical sorbents and a P100 filter to attract, retain and neutralize contaminant’s.

• The Millennium CBRN gas mask is designed to be used as a system, & while the thread & gasket meet the specifications of the standard, only MSA-manufactured components are tested & certified as assemblies.

• Approvals and Standards: NIOSH CBRN Approved NTOA Member Tested and Recommended.

• Size: Small, Large

F

FIREHAWK™ AIR MASK

MSA’s FireHawk™ air mask, our latest SCBA platform, takes its name from our highly successful FireHawk mask-mounted regulator and demonstrates innovation with an all-new Airframe™ carrier and harness assembly. The FireHawk gives you more safety and ergonomic features than any other SCBA on the market, and some of them can even be added to existing Vulcan carrier and harness assemblies for firefighters who want more features on their same great SCBA. MSA is standardizing our family branding of SCBA, and the “FireHawk” name will identify NFPA-compliant air masks used by firefighters. Industrial air masks now bear the trademark “AirHawk,” and law enforcement (tactical) SCBA are called “BlackHawk” air masks, replacing the “Custom 4500,” “Ultralite,” and “MMR Xtreme” names.

Model

Item Number

Model

Item Number

Standard

K-CMD22G03C14AC0

Millennium CBRN Gas Mask

10051286

CBRN

K-CMD22R03C14AC0

G

DUPONT™ TYCHEM® CPF 3 HD

• Tychem® CPF 3 HD garments are intended for use by law enforcement, HazMat and hospital personnel • Offered in respirator fit hood & collar style for use with a PAPR; ideal for hospital first receiver applications • Tychem® CPF 3 HD garments include integrated gloves & improved closures to reduce response time, deliver a high-level of dexterity & tactility, & improve protection Item Number (Coverall)

• Strong & durable garments with broad chemical barrier • Use when potential exposure to chemical warfare agents exists • Tychem® CPF 3 is a multi-layer barrier film laminated to a durable 2.0 oz polypropylene fabric • Tychem® CPF 3 is tan for discretionary purposes • BN = Berry Compliant

Description

C3184T 6/cs

taped seams, collar, front zipper closure, double storm flaps, with hook-and-loop closure, attached jam fit removable/field replaceable, neoprene outer/Barrier® inner gloves, attached socks, outer boot flaps

C3185T 6/cs

taped seams, attached hood (respirator fit)2, front zipper closure, double storm flaps, with hook-and-loop closure, attached jam fit removable/field replaceable, neoprene outer/Barrier® inner gloves, attached socks, outer boot flaps

C3128T BN

coverall, attached hood with elastic respirator fit closure, elastic wrists, front zipper closure, storm flap over zipper, attached socks with outer boot flaps, taped seams

C3122T BN

coverall with zipper front and attached hood, elastic around hood opening and at wrists, attached overboots of suit material, set sleeve pattern for greater arm movement, taped seams

H

G

DUPONT™ TYCHEM® F

•

• •

Widely used by military personnel & first responders for chemical warfare situations Strong & durable garments with broad chemical barrier Use when potential exposure to industrial chemicals & chemical warfare agents exists • Successfully tested by Soldier & Biological Chemical Command (SBCCOM) in Aberdeen, MD Item Number (Coverall)

• Inquire about special packaging options including individually vacuum packaged garments • Tychem® F is a barrier film laminated to Tyvek® • Tychem® F is gray for discretionary purposes • TV = TAA compliant

H

Description

TF145T 6/cs taped seams, attached hood (respirator fit)2, front zipper closure, storm flap, elastic wrists, elastic ankles TF145T TV 6/cs TF169T 6/cs taped seams, attached hood (respirator fit)2, front zipper closure, storm flap, elastic wrists, attached socks TF169T TV 6/cs

ISO 9001:2008 CERTIFIED | ADSINC.COM

21

CHEM BIO & DETECTION

A

C

PROTECTION

B

A CERTIFIED TO NFPA 1994 2007 EDITION CLASS 2

B CERTIFIED TO NFPA 1991 & 2001 EDITION

Tychem® TK • For use in the circumstances of chemical/biological an immediate threat, is unidentified and of unknown concentration • Gas-tight integrity • Extremely durable to abrasion, tearing, punctures and cuts • High-level of permeation resistance against chemical and biological agents, as well as high-threat industrial chemical liquids and gases • Tychem® TK is high-visibility lime yellow

Tychem® TK - a patented limited-use fabric consisting of multiple barrier films laminated to both sides of a tough substrate material.

Tychem® TK provides one of the broadest ranges of chemical protection available, successfully tested against more than 260 chemicals.

• Fully encapsulated Level A NFPA ensemble • inner suit - extra wide three-layer faceshield (PVC 40 mil / Teflon® 5 mil / PVC 20 mil) • Three-layer glove system (Ansell Barrier® / Neoprene / Kevlar® knit) • Expanded back (accommodates SCBA) • Front entry gas-tight zipper closure • Double storm flap over zipper • Attached boots, outer boot flaps • Knee wear pads, four exhaust valves • Internal adjustment belt; outer suit - Lexan® EX (extra wide faceshield (20 mil) • Front entry • Hook and loop suit closure • Four exhaust vents

Item Number

Description

fully encapsulated Level A double taped seams, three-layer EX Tychem® TK certified to NFPA face shield, (PVC 40 mil/PTFE 5 mil/ 1994 2007 Edition Class 2 PVC 20 mil), gas-tight zipper closure, double storm flap, four exhaust TK612T2 front entry, 1/cs valves, expanded back, attached twolayer gloves, (Barrier®/neoprene/knit), TK613T2 rear entry, 1/cs attached socks 2, outer boot flaps

Item Number TK600 TK601

22

800.948.9433

Description Seam type: Both sewn and taped to provide strong chemical resistance against heavy liquid splashes and tough seam stress. A sewn seam is covered with a strip of compatible material by heat-sealing

C

CERTIFIED TO NFPA 1992, 70E CAT 2

• Tychem® ThermoPro • Used for HazMat response as well as industrial and domestic preparedness situations where flash fire is likely to occur • Unique technology provides flash fire and liquid splash protection in a single-layer garment • Patented combination of Tychem® chemical barrier and NOMEX® thermal protection • Fabric permeation results on more than 200 chemical threats • Certified as meeting NFPA 2112 “Standard on Flame Resistant Garments for Protection of Industrial Personnel against Flash Fire” • Constructed for heavy use, yet lightweight and easy to wear • Tychem® ThermoPro is available in orange for high-visibility; and gray for discretionary purposes • BN = Berry compliant Item Number

Description

TP188T OR orange, 2/cs taped seams, attached hood (respirator fit) 2, front zipper closure, double storm flaps with, hook-and-loop cloTP188T OR BN orange, 2/cs sure, elastic wrists, hemmed ankles TP188T GY gray, 2/cs

TP188T GY BN gray, 2/cs TP199T OR orange, 2/cs taped seams, attached hood (respirator fit) 2, front zipper closure, double storm flaps with, hook-and-loop cloTP199T OR BN orange, 2/cs sure, elastic wrists, attached socks, outer boot flaps TP199T GY BN gray, 2/cs TP199T GY gray, 2/cs

FIRE SUPPRESSION & CONTAINMENT

Extinguishing Systems . . . . . . . . . . . . . . . . . . . . . . . . 24 Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Hoses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Positive Pressure Ventilation. . . . . . . . . . . . . . . . . . . . 30 Containment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

CATALOG PRODUCT LABELS Look for these symbols next to products in this catalog to quickly identify important ordering options or special characteristics.

Designated for the Army Rapid Fielding Initiative.

National Fire Protection Association Certified.

Products from this manufacturer are available from ADS through GSA. See these products on YouTube at: youtube.com/adstactical Look for these symbols and enter the adress to visit the manufacturers page on adsinc.com 23

FIRE SUPPRESSION & CONTAINMENT EXTINGUISHING SYSTEMS

A

ABC DRY CHEMICAL

ABC or Multi-Purpose extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator.

• Available in Wheeled and Stationary extinguishers • Dependable Drawn Steel Cylinders • All Metal Valve Construction • Easy and more economical to maintain and service • U/L & U.S. Coast Guard Listed • Bar Coded and Bilingual Labels • Temperature Range -65°F to 120°F • All extinguishers are USCG approved with bracket listed on UL label.

• 6 YEAR WARRANTY

A

Aluminum Size & Capacity (lbs.)

Application

Item Number

2½

Nozzle

B417 / B417T

5

Hose and Nozzle

B500 / B500T

6

Hose and Nozzle

B443

10 Tall

Hose and Nozzle

B456

20

Hose and Nozzle

A411

Size & Capacity (lbs.)

Application

Item Number

5

Hose and Nozzle

B424

6

Hose and Nozzle

B461

10 Tall

Hose and Nozzle

B441

20

Hose and Nozzle

423

Brass, Chrome Plated

B

C

B

PURPLE K DRY CHEMICAL

PURPLE K extinguishers contain specially fluidized and siliconized potassium bicarbonate dry chemical which is particularly effective on Class B flammable liquids and pressurized gases. It is electrically non-conductive. Purple K has been the choice of oil, gas, chemical and utilities industries as the perferred fire fighting agent.

• Available in Wheeled and Stationary extinguishers • Dependable Drawn Steel Cylinders • All Metal Valve Construction • Easy and more economical to maintain and service • Bar Coded and Bilingual Labels • Temperature Range -65°F to 120°F • All extinguishers are USCG approved with bracket listed on UL label.

• 6 YEAR WARRANTY Aluminum Size & Capacity (lbs.)

Application

Item Number

2½

Nozzle

B410T

5

Hose and Nozzle

B479 / B479T

20

Hose and Nozzle

A413

Size & Capacity (lbs.)

Application

Item Number

10 Tall

Hose and Nozzle

B460

20

Hose and Nozzle

415

Brass, Chrome Plated

C HALON WHEELED FIRE EXTINGUISHER

• • • • • • • • •

24

800.948.9433

Brass, chrome plated operating valve 200 PSI Operating Pressure Heavy duty steel cylinder, carriage & hose hanger assembly Quick release 50 ft. discharge hose with brass/chrome plated ball type shut-off nozzle Pressure gauge protected by a stainless steel gauge guard Corrosion resistant lime/yellow polyurethane paint finish Large color coded mylar instruction labels Operating temperature range: -65° to +120° F. 1 year limited warranty

Model

Item Number

Halon Wheeled Fire Extinguisher

600K

E

R.A.M

E

R.A.M. is easily deployed and operated by a single firefighter. Its patent-pending hydraulic stability system harnesses reaction force to stabilize the monitor. Four fold-out forged aluminum legs with carbide-tipped ground spikes extend to the largest footprint in its class for exceptional stability. The rear ground spikes are angled to help the carbide tips grip the ground surface. The R.A.M. can be carried while attached to a charged line. Exclusive patent pending-design lowers friction loss and produces consistent stream quality in all ranges of motion. The R.A.M. can be stored pre-connected and features an ergonomic U-shaped valve handle. Attached safety strap includes storage pouch.

Model

Item Number

R.A.M

8296701

F

F

STINGER® RF

Stinger® RF is a dual purpose break-apart monitor for use as a deck gun or portable monitor. The wireless RF increases effective use of personnel while reducing the potential risk of injury. This monitor can be remotely operated from up to ¼ mile away - in either deck gun or portable mode - with hand-held transmitter. When used in deck gun mode, the Stinger® RF requires only a hot wire connector - dramatically reducing installation costs with an easy 2-wire connection. When used in portable mode, the Stinger® RF is battery powered and completely self contained. The patent-pending, easy, on-scene programming of oscillation is designed for exposure protection or hazardous material suppression. Exclusive dual speed left/right drive feature allow precise stream placement. Available in several ISM bands for license free use around the world.

Model

Item Number

Stinger® RF

8297262

H

G

PHANTOM®

G

The selectable gallonage Phantom nozzle lets the firefighter select the appropriate flow. The wide selection range standard with the Phantom® makes it one nozzle for every use, from brush to interior attack. The Phantom® is designed for reliable performance with rugged metal selector ring and dual drive metal ball shut-off. Available standard in 100 psi and true 75 psi models.

• Handle: Horseshoe,Tab • Available standard in 100 psi and true 75 psi models.

• Pistol Grip, Bumper & Handle Color: Black, Red, Orange, Green, Blue, Yellow When ordering the metric version of a 1” Phantom nozzle, the flow rate will be set and labeled at 60/120/180/240 LPM (15/32/47/64 gpm). ®

Model

Item Number

Phantom

43011

NOZZLES

D

FIRE SUPPRESSION & CONTAINMENT

D

CHIEF™

H

Fixed-flow Chief nozzles efficiently deliver a constant gallonage from straight stream to full fog. The simple, rugged design makes the Chief™ easy to use and train with and reliable in tough situations.

Superior hydraulics, due to a fully machined waterway, result in excellent stream quality and reach. The Chief™ is also available in true low pressure versions with specifically engineered, calibrated and labeled stems down to 50 psi. With more than 300 available variations, the Chief™ is easily customized to meet your specific needs.

• Aluminum / Bronze shut-off handle with double stops • 100 psi, 75 psi or 50 psi models • Flush without shut-off • Standard spinning teeth, or optional molded urethane teeth • Can be field retrofitted to optional flows and pressures • Durable color selectable urethane bumper ™

Model

Item Number

Chief

4000135

SELECT-O-MATIC®

Pressure-regulating Select-O-Matic® nozzles automatically adjust to fluctuating water flow to maintain effective pressure and a consistent fire stream in all flow ranges. Our patented, completely unobstructed waterway allows more GPM at lower pressures than any competitive brand. All models flush easily without shutting down and provide constant flow on either fog or straight stream, making them ideal for the application of AFFF foam. Corrosion-resistant; no lubrication required.

Model

Item Number

Select-o-matic

2491804

ISO 9001:2008 CERTIFIED | ADSINC.COM

25

FIRE SUPPRESSION & CONTAINMENT NOZZLES 26

adsinc.com trident-one

TRIDENT ONE The Trident is an expanded shower, low cost, low pressure, high volume water deployment system developed to assist first responders in GROSS MASS DECONTAMINATION on a large volume of people in case of emergency, industrial catastrophe or terrorism. The Trident’s PATENTED telescoping arms greatly increase the shower area and at the same time minimizing the risk of possible contamination to the first responder.

The Trident One will connect to ANY 2.5’ discharge via the 45 or 90 degree coupling included. We have also developed a stand that will allow the Trident One to be remotely located and free up apparatus. Making this device a must have for any First Responder or Emergency management trailer.

Model

Item Number

Trident-One

TADS-1

Trident-One with stand

TADS-1S

800.948.9433

B

FIRE SUPPRESSION & CONTAINMENT

A

C

HOSES

A

MOBILE HOSE DRIER

B

• Hose dries quickly and naturally to prolong the life of your equipment.

• Heavy duty steel construction with a durable red powder coat.

Can be used to dry immersion suits, wet or dry dive gear, rope, webbing and more.

• Drier can hold up to 1200’ of 1 ½ hose or up to 800’ of 2 ½ to 3” hose.

• Ships knocked down and is easy to assemble.

• Made in the USA • Size: 80”L x 33”W x 88”H Model

Item Number

Mobile Hose Drier

MHD-80

TILTING HOSE TURNTABLE

• Heavy duty steel construction with a durable red powder coat finish.

• Casters allow for easy mobility.

• Simply loosen handle to adjust table from flat horizontal to a complete vertical position and all points in between.

• Made in the USA • Size: 32”L x 28”D x 37”H Model

Item Number

Tilting Hose Turntable

TT-27

C

HOSE CARTS

• • • • •

Heavy duty steel construction with a durable red powder coat finish.

Four heavy duty casters allow for easy movement.

Ships knocked down for savings.

Easy to assemble.

Made in the USA

Size

Item Number

104”L x 79”H x 34”W holds up to 2000’ of 2 1/2 hose

HC-962T

104”L x 87”H x 34”W holds up to 3000’ of 2 1/2 hose

HC-963T

D

D

FIREPOWER™ II

Aggressive Interior Attack Hose Firepower™ II is an interior attack fire hose with the performance needed for the aggressive tactics employed by firefighters of today. Firepower II is a responsive, alert feeling attack hose with unmatched flexibility and kink resistance. Unlike other conventional attack hoses, Firepower II gives unprecedented superior performance and reduces strain on firefighters, even in the tightest and most demanding environments.

Contact ADS for ordering information Size

E

Service

Pressure Proof

Burst

BowlSize

Weight* 50'(15m)

Coil Diameter 50'(15m)

inch mm

psi kPa

psi kPa

psi kPa

inch mm

lbs. kg

inch mm

1-1/2 38

400 2800

800 5600

1200 8400

1-15/16 49

14 6.3

20 508

1-3/4 50

400 2800

800 5600

1200 8400

2-1/6 55

15 6.8

21 533

2-1/2 65

400 2800

800 5600

1200 8400

3 76

27.5 12.5

22 559

E

HI-COMBAT II™

Hi-Combat II™ is the ultimate in fire fighting hose technology for aggressive interior combat operations. Its unique 4-part construction design gives professional combat firefighters the performance, flexibility and endurance to deal with the toughest challenges. With higher kink, heat, abrasion and chemical resistance, lower drag coefficiency and unique antiburst technology, Hi-Combat II’s super powerful attributes set standards for fire hose that every fire fighter deserves.

Contact ADS for ordering information Size

Service

Pressure Proof

Burst

BowlSize

Weight* 50'(15m)

Coil Diameter 50'(15m)

inch mm

psi kPa

psi kPa

psi kPa

inch mm

lbs. kg

inch mm

1-3/4 45

500 3500

1000 7000

1500 10500

2-1/8 54

18 8.1

16-1/2 419

2-1/2 65

400 2800

800 5600

1200 8400

2-1/8 73

27 12.3

18-1/2 470

ISO 9001:2008 CERTIFIED | ADSINC.COM

27

FIRE SUPPRESSION & CONTAINMENT

A

A

B

Item Number

HP300DK-0 300 GPM Open Cross Chassis Unit

545-6030-56-0

B

PUMPS

• Standard Equipment: Open cross chassis design, painted steel structural frame, low profile design, optional suction and manifold designs • Suction: 3’ NPT or 4” Victaulic • Discharge: 2” NPT • Priming: Hale ESP priming system 12 volt, mounted • Weight: 910 lbs • Dimensions: 48” x 27” x 43.5”

Model

20FP-C8P HIGH PRESSURE BACKPACK PUMP

• Description: Lightweight high pressure backpack pump • Application: Wildland firefighting • Maximum Flow: 75 GPM • Maximum Pressure: 220 PSI • Engine: US Motor Power, 8HP 2 cycle gasoline engine • Fuel Tank Capacity: remote loose fuel tank, 6 gal • Starting: Water resistant, solid state ignition with recoil start

C

• Pump: High strength, corrosion resistant aluminum alloy • Standard Equipment: Overspeed protection, spark arresting muffler, padded adjustable backpack frame • Suction: 1.5” NHM • Discharge: 1.5” NHM • Priming: Hand operated brass piston type primer • Weight: 34 lbs • Dimensions: 32” x 16” x 13”

Model

Item Number

20FP-C8P High Pressure Backpack Pump

545-2141-00-0

E

D

C

HPT75-YD9 TRANSPORTABLE PUMP

D

HPT200-B18 TRANSPORTABLE PUMP

E

• • • • •

Description: Lightweight diesel, medium pressure, low volume pump Application: Wildland & Attack Firefighting Maximum Flow: 115 GPM Maximum Pressure: 210 PSI Range: 110 GPM @ 10 PSI, 106 GPM @ 50 PSI, 75 GPM @ 100 PSI, 47 GPM @ 150 PSI, 30 GPM @ 175 PSI, 18 GPM @ 200 PSI Engine: Yanmar L100V 9HP diesel Fuel Tank Capacity: 1.24 gal Starting: 12-volt electric start with manual recoil backup Pump: High strength, corrosion resistant aluminum alloy Standard Equipment: Carrying handles, mounted battery, mounted control panel with discharge gauge and exclusive band clamp design for quick and easy access for maintenance and repairs Suction: 2” NHM Discharge: 1-1/2”NHM Priming: Hale Guzzler hand primer mounted Weight: 210 lbs Dimensions: 22” x 18.5” x 22”

• • • • •

Description: Lightweight gas, medium pressure, medium volume pump Application: Supply, tank refilling, & low pressure firefighting Maximum Flow: 247 GPM Maximum Pressure: 165 PSI Range: 248 GPM @ 10PSI, 231 GPM @ 50 PSI, 150 GPM @ 100 PSI, 63 GPM @ 150 PSI Engine: Briggs and Stratton Vanguard 18HP Fuel Tank Capacity: Remote loose fuel tank -6 gal Starting: 12-volt electric start ignition system w/ manual recoil backup Pump: High strength, corrosion resistant aluminum alloy Standard Equipment: Carrying handles, mounted battery, mounted control panel with discharge gauge and exclusive band clamp design for quick and easy access for maintenance and repairs Suction: 2.5” NSTM Discharge: 2.5” NSTM Priming: Exhaust venturi type Weight: 159 lbs Dimensions: 28.9” x 21” x 20.2”

• Description: Lightweight diesel, medium pressure, medium volume pump • Application: Supply, tank refilling, & low pressure firefighting • Maximum Flow: 200 GPM • Maximum Pressure: 106 PSI • Range: 185 GPM @ 10PSI, 156 GPM @ 25 PSI, 108 GPM @ 50 PSI, 59 GPM @ 75 PSI, 11 GPM @ 100 PSI • Engine: Yanmar L100V 9HP Diesel Engine • Fuel Tank Capacity: 1.24 gal • Starting: 12-volt electric start ignition system w/ manual recoil backup • Pump: High strength, corrosion resistant aluminum alloy • Standard Equipment: Carrying handles, mounted battery, mounted control panel with discharge gauge and exclusive band clamp design for quick and easy access for maintenance and repairs • Suction: 2.5” NHM • Discharge: 2.5” NHM • Priming: Hale Guzzler hand primer mounted • Weight: 205 lbs • Dimensions: 21” x 20” x 22”

• • • • • • • • • •

28

HP300DK-0 300 GPM OPEN CROSS CHASSIS UNIT

• Description: Cross chassis turbo diesel high performance pump • Application: Wildland Firefighting Apparatus Mounted Package - Exceeds ISO 9 and NFPA 1901-250 GPM • Performance: 300 GPM @ 150 PSI. Meets NFPA 1901 250 rating • Engine: Kubota 4 cylinder, 2.43 Liter Turbo four cycle 59 HP diesel • Starting: 12 volt electrical • Pump: Hale 30FS-M cast iron pump end

• • • • • • • • • •

Model

Item Number

Model

Item Number

HPT75-YD9 Transportable Pump

545-4241-10-0

HPT200-B18 Transportable Pump

545-4061-20-0

800.948.9433

HPT200-YD9 TRANSPORTABLE PUMP

Model

Item Number

HPT200-YD9 Transportable Pump

545-4261-10-0

FIRE SUPPRESSION & CONTAINMENT

FP3000DI-T 3000 GPM NFPA 1901 TRAILER UNIT • • • • • • •

12VDC Electric brakes Adjustable ball hitch Red finish on trailer and enclosure Removable side panels with latches Enclosure louveres for ventilation Thermal relief valve Control panel Equipment: Gauges, Hourmeter, Fuel level gauge, Oil pressure gauge, Coolant temperature gauge Class 1 pump pressure governor • Priming: Hale dual ESP primer with SPV control • Options: Bronze pump, potable water seal system, discharge and suction manifolds available. Available in different NFPA ratings from 500 GPM to 2000 GPM

Model

Item Number

FP3000DI-T 3000 GPM NFPA 1901 Trailer Unit

545-6301-80-0

F

PUMPS

• Description: Custom trailer pump • Application: Standby fire protection, remote pumping operations • Maximum Flow: Flows up to 3000 GPM • Maximum Pressure: Up to 250 PSI • Engine: IVECO Motors diesel engine with electronic controls • Starting: 12 volt electrical • Pump: Hale 80F series cast iron pump with heavy duty gearbox • Standard Equipment: Includes heavy duty steel trailer with heavy duty diamond plate deck • Integral 100 gallon fuel tank • Leaf spring suspension • DOT approved w/ reflective safety stripes • Steel industrial wheels • Mechanical parking brake

G H

F HPW200-B18 TRANSPORTABLE WITH WRAPAROUND FRAME

• • • • • • • • • •

• • • • •

Description: Lightweight gas, medium pressure, medium volume pump Application: Supply, tank refilling, & low pressure firefighting Maximum Flow: 247 GPM Maximum Pressure: 165 PSI Range: 248 GPM @ 10PSI, 231 GPM @ 50 PSI, 150 GPM @ 100 PSI, 63 GPM @ 150 PSI Engine: Briggs and Stratton Vanguard 18HP Gasoline Engine Fuel Tank Capacity: Basemounted fuel tank-2.5 gal Starting: 12-volt electric start ignition system w/ manual recoil backup Pump: High strength, corrosion resistant aluminum alloy Standard Equipment: Ergonomic wrap around frame w/ carrying handles, mounted battery, mounted control panel with discharge gauge and exclusive band clamp design for quick and easy access for maintenance and repairs Suction: 2.5” NHM Discharge: 2.5” NHM Priming: Exhaust venturi type Weight: 179 lbs Dimensions: 28” x 18.7” x 21.7”

G 20FP-C8FR HIGH PRESSURE TRANSPORTABLE WITH WRAPAROUND FRAME

• • • • • • • • • • • • • • • • •

Description: Lightweight volume or pressure portable pump Application: Wildland firefighting Two models to choose from 20FP-C8FR High pressure pump with wrap around frame 20FV-C8FR High volume pump with wrap around frame Maximum Flow: 150 GPM (20FV-C8FR), 70 GPM (20FP-C8FR) Maximum Pressure: 130 PSI (20FV-C8FR), 175 PSI (20FP-C8FR) Engine: US Motor Power, 8HP 2 cycle gasoline engine Fuel Tank Capacity: 3.1 qts Starting: recoil start Pump: High strength, corrosion resistant aluminum alloy Standard Equipment: Overspeed protection, spark arresting muffler, wrap around frame Discharge: 1.5” NH Suction: 2” NH Priming: Hand operated brass piston type primer Weight: 50 lbs Dimensions: 17.5” x 16” x 19.5”

Model

Item Number

Model

Item Number

HPW200-B18 Transportable with Wraparound Frame

545-4061-41-0

20FP-C8FR High Pressure Transportable with Wraparound Frame

545-2180-00-0

H

20FP-C8 FLOAT PUMP

• • • • • • • • • •

Description: Lightweight compact floating pump Application: Wildland firefighting Two models to choose from: 20FV-C8-volume and 20FP-C8-pressure Maximum Flow:150 GPM (20FV-C8),70 GPM (20FP-C8) Maximum Pressure: 130 PSI (20FV-C8), 175 PSI (20FP-C8) Engine: US Motor Power, 8HP 2 cycle gasoline engine Fuel Tank Capacity: 5 qt’s Starting: Water resistant, solid state ignition w/recoil start Pump: High strength, corrosion resistant aluminum alloy Standard Equipment: Overspeed protection, spark arresting muffler, drafts in as little as 4” of water Suction: 2” non thread w/ inlet screen Discharge: 1.5” NHM Priming: Automatic Weight: 49 lbs Dimensions: 28” x 20” x 16”

• • • • •

Model

Item Number

20FP-C8 Float Pump

545-2131-00-0

ISO 9001:2008 CERTIFIED | ADSINC.COM

29

FIRE SUPPRESSION & CONTAINMENT POSITIVE PRESSURE VENTILATION

A

A

B

P164 SMOKE EJECTOR

B

The P164 is the most popular unit in the fire/rescue service. It is the perfect combination of high airflow and easy to handle size. The single most popular fan in the history of the fire service.

Model

Item Number

P164 Smoke Ejector

P164

Model

Item Number

SVU-50

SVU-50

C D

C

18” POSITIVE PRESSURE FAN WITH 6.5 HP HONDA MOTOR

Super Vac is the leader in high airflow and compact fan design for gasoline powered PPV’s. The heart of these units is the cast aluminum airfoil propeller designed specifically for use on PPV fans. We use only aluminum blades due to their ability to withstand the high radiant heat found on fire scenes. The power comes from your choice of Honda or Tecumseh engines. We use the largest Horsepower engines to provide the extra punch in those tough ventilation situations. These engines come with a factory approved two year warranty.

30

SVU-50

A very versatile size makes the SVU series useful in situations where a district includes large, vulnerable public sites. It can easily be adapted to mount a variety of places in a large truck, even run off the trucks power take-off.

Model

Item Number

18” Positive Pressure Fan w/ 6.5 HP Honda Motor

718G4H

800.948.9433

D

P8XE NANO (8 INCH CONFINED SPACE WITH DUCT WORK)

Super Vac’s Nano is the perfect, cost effective solution to confined space either supply air or exhaust ventilation, delivering the highest airflow in its class. It comes in your choice of standard or static dissipating Hazardous Location options. Also available in a kit with ducting, the NanoPac’s include both the fan and your choice of 15 or 25 feet of bag-o-duct that easily attaches to the inlet or outlet of the fan.

Model

Item Number

P8XE Nano

P8XE NANO

FIRE SUPPRESSION & CONTAINMENT

E

FIRE/ RESCUE PORTABLE VENTILATORS AND FANS

Item Number

Description

Item Number

Description

SVB-G8

Gasoline blower 3000cfm free air

SVB-E8-2

2 speed electric blower 750 low/1570 high free air delivery

SVB-E8

Electric blower 1570cfm free air

SVB-A8

Pneumatic blower 3000cfm free air

F

G

G F

• Industrial Grade - Heavy Duty • 8” intake and exhaust flanges and standard aluminum non-sparking wheel.

POSITIVE PRESSURE VENTILATION

E

• High performance blowers provides rescue teams the cfm and pressure for running long sections of duct through twisted rubble during collapse rescue operations.

FIRE/RESCUE PPV BLOWERS

Positive Pressure Ventilation Honda Powered Gas Blowers • The impeller is mounted directly to the engine shaft, reducing the blowers overall weight.

• Vibration problems that are common to most direct-drive blowers have been minimize with the use of overhead valve engines, precisely balanced impellers, and vibration-absorbing feet.

• The direct-drive design is more compact to provide a smaller profile for storage in most apparatus compartments.

VSX VARIABLE SPEED ELECTRIC BLOWER

• Higher Rated CFM than any other Variable Speed Electric Blower line.

• Four power options to choose from. EPM technology allows for precise programming for operation on most electrical configurations.

• Size for every Apparatus: 16”, 18”, 21” and 24” available.

• 2 hp motor starts and runs continuously on standard 120V / 20Amp non GFCI protected circuit breakers.

• Third party Certified Airflow.

• Soft Start Technology allows for gradual speed increase, eliminating start up amp surge.

• Exclusive AirFlex Impeller specifically designed for each VSX blower.

Model

Item Number

Model

Item Number

16” PPV Gas Powered Blower

700-086

16” VSX Electric Blower

700-350A

18” PPV Gas Powered Blower

700-024

18” VSX Electric Blower

700-352A

21” PPV Gas Powered Blower

700-050

21” VSX Electric Blower

700-354A

24” PPV Gas Powered Blower

700-017

24” VSX Electric Blower

700-356A

ISO 9001:2008 CERTIFIED | ADSINC.COM

31

CONTAINMENT

FIRE SUPPRESSION & CONTAINMENT

“LEADER OF THE PACK” At Husky Portable Containment our goal is to manufacture the easiest to use, most durable products available. If your needs are firefighting or environmental we are here for you!

FIRE FIGHTING PRODUCTS • Folding frame tanks (alumn. and steel, double fold) pinch free!

• Self supporting tanks (100-20,000 gal.).

• Ground covers for frame tanks and self supporting tanks.

• Salvage covers, hose bed covers (all sizes and materials).

• 72 gal./134 gal. helicopter transportable water tanks.

Replacement liners and frames (will fit any tank).

Supply line brackets (1.5” - 5”) Storz available.

Drain clamps and drain connectors.

Hose stand (adjusts from 31” - 44” height).

Floating strainers (1.5” - 6”) Storz available.

Decontamination pools.

Bladder tanks (potable water, gray water, chemicals).

14K Forestry Tank

1500 gal. Fire Dept. Tank

32

• • • • • • •

“Easy Lift Handles” patent pending - published 6/10/10

Our unique manufacturing process on our frame tank liners (vinyl) allows us to use a heavier material for the base creating the most durable liner on the market today. Our exclusive “Easy Lift Handles” installed on the base of the liner (standard) makes Husky’s tank the easiest and quickest to fold and makes for easy removal of standing water (patent pending - published 6/10/2010). Husky’s Pinch Free Frame is designed with safety in mind for the firefighters. No more pinching of your hands or fingers in the folding areas of the tank. Feel the confidence to know you can quickly deploy your portable tank without risking injury. There are no bulky add-on pieces to get in the way. Comes standard in our steel and alum tanks. New Option-Quick Dump (Patent Pending) available on all Folding Frame Tanks this option can empty your tank in approximately 20 seconds. Firefighter tested and approved!

SECONDARY CONTAINMENT PRODUCTS

Patriot Berm

Freedom Series II Berm

Freedom Series IV

Eagle Berm

800.948.9433

• • • • • • •

New lightweight drive through berms.

Drive through berms for all applications.

Aluminum angle berms.

Continuous air chamber berms.

Separate air chamber berms.

Foam wall berms.

Bladder tanks (potable water, gray water, chemicals).

• Fuel bladders, boat bladders (diesel or jet only).

• Decontamination pools.

• Containment pools.

• Drain covers.

• Water wall berms.

• Water dikes.

KITS

Joint Forces Extrication Kit. . . . . . . . . . . . . . . . . . . . . 34 Vehicle Extraction Kit . . . . . . . . . . . . . . . . . . . . . . . . . 35 TACOM Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Speeds速 Decontamination Systems. . . . . . . . . . . . . . 38

CATALOG PRODUCT LABELS Look for these symbols next to products in this catalog to quickly identify important ordering options or special characteristics.

Designated for the Army Rapid Fielding Initiative.

National Fire Protection Association Certified.

Products from this manufacturer are available from ADS through GSA. See these products on YouTube at: youtube.com/adstactical Look for these symbols and enter the adress to visit the manufacturers page on adsinc.com 33

KITS JOINT FORCES EXTRICATION KIT

JOINT FORCES EXTRICATION KIT The Extremely powerful and uniquely versatile, the Power Hawk P-16 Rescue System is unlike any other rescue tool in the marketplace. The Power Hawk Rescue System is the first all-electric (no hydraulics), “jaws” type rescue tool. By eliminating hydraulics completely and utilizing 12 Volts DC power, the VERSATILITY of the POWER HAWK makes it the perfect choice for: • Vehicle Extrication (Including Armored) • Aircraft Rescue • Damage Control

• Rapid-Intervention Teams • Collapse rescues • Remote rescues

• Indoor and confined space operations • Forcible entry • Special operations and more

Model

Item Number

Joint Forces Extrication Kit

JFE-KIT

See these products on YouTube at:

youtube.com/adstactical

adsinc.com jfe-kit

Casualties resulting from roadside bombs and IED’s are accounting for roughly 75% of the mortality rate for coalition forces in-theater. The Joint Forces Extrication Kit was designed with the safety of the warfighter in mind and offers a quick and easy solution for rapid entry into any vehicle.

Case 1

CASE 1 • Enormous spreading and cutting forces using 12 Volts DC battery power without hydraulics! (no combustible fuels, no hydraulic fluids, no high pressure hoses) • Power blade “cross-over” feature enables prying operations to begin from a gap that is less than a ¼” wide. This feature is critical for gaining access in armored HMMWV and MRAP doors and hatches where the gaps are small • 70 degree pivot of the P-16 Rescue Tool Powerhead enables both spreaders and cutters to get into tight areas or work “around-the-corner” • Spreader, cutter, and combi tool attachments can be changed in seconds, providing multiple-use capability in just one tool • Easy to add-on or replace spreader & cutter parts • Lightweight & portable • Super compact, easily stowed inside vehicles and aircraft • Low maintenance • Rapid response - no setup • Quiet operation • Performs in harsh environments; sand/water/hot/cold/o2-depleted atmospheres.

• 12 Volts DC back-up power readily available with spare battery packs or by connecting directly to military or civilian vehicles using the supplied jumper cables or vehicle harness kit • Long-lasting, no-spill battery (certified as non-hazardous for transport)

Case 2

CASE 2 The new Husqvarna K760 Rescue Saw is our latest and most powerful handheld power cutter, featuring the revolutionary DualCharge™ engine technology. This unique machine is in a class of its own when it comes to emission levels, efficiency and maneuverability.

• 30” forged halligan tool • Sledge hammer, 4 lb. short fiberglass handle • Come-along 2,000 lb. capacity

34

800.948.9433

KITS

VEHICLE EXTRACTION KIT

A

Model

Item Number

Vehicle Extraction Kit

2467D-KIT

COMBI TOOL

The 4150 Combi is a powerful tool that offers both Cutting (67,000 lbs) and Spreading (16,166 lbs) capabilities. It comes with integrated LED lights in the handle and a low profile i-Bolt that narrows insertion profile by 2 inches. The 4150 weighs in at 31 lbs. It is also the only combi tool on the market that is UL listed.

B

The PU5 is a full performance compact mini pump with hydraulic and fuel tanks designed for portability. The PU5 easily powers the full sized 4150 Combi tool and 4340 Telescopic ram with a patented CORE Technology™ hydraulic system so rescuers can direct their focus to the rescue operations, not the rescue equipment. For added versatility, this kit also contains a Hooligan tool. Faster, Easier and Safer, this package allows you to get the job done and get out.

B A

VEHICLE EXTRACTION KIT

In a rescue situation, time and mobility are mission-critical. These factors are more significant when rescue operations involve armored vehicles in a hostile environment. Portability is important, but performance is key. This lightweight, highly portable package allows rescuers to respond quickly, yet still get the job done.

E

RAM

The 4340 Telescopic Ram was designed for hard to reach places and is extremely powerful. In its closed position it is 12 inches long and extends its first stage 7 inches with 49,145 lbs; an additional piston extends a further 5 inches with up to 18,210 lbs. The 4340 weighs 24 lbs.

C

MINI PUMP

C

The PU5 was designed for portability (26 lbs.) and combined with the 4150 and 4340, is the perfect set up for a complete remote rescue system.

D

HOSES

All tools above operate with CORE technology couplings and coaxial hoses which means the high pressure hose is housed inside the low pressure return. This allows for foolproof connections and vastly reduced set up and less than half the weight as traditional twin line hose systems.

D E

HOOLIGAN

Hooligan Tool has set the standard of excellence for Halligan type tools. Now available with a machined alloy shaft for lighter weight, these heavyduty tools were designed to pry, pound, puncture, twist, and cut open or remove all types of barriers between emergency service personnel and the ability to save a life. • Dimensions: Length 30 (76.2), Weight 10.6 (4.8)

Kit components are contained in a custom London Bridge Trading wheeled loadout bag.

Aerial View Side View

ISO 9001:2008 CERTIFIED | ADSINC.COM

35

KITS TACOM KIT

TACOM KIT The Firefighter Individual Requirements Set (FIRES) was developed by the U.S. Army to outfit and support the U.S. Army 12M firefighter mission.

FIRES standardizes the equipment set of the deployable individual Army firefighter with the latest protective equipment meeting NFPA and OSHA standards. This unique set provides the Army firefighter with the personal protective equipment needed to handle the complete range of firefighting responsibilities in a deployable and compact package.

FIRES consists of four ensemble sub-systems: • Structural Firefighting Clothing Ensemble • Wildland Firefighting Clothing Ensemble • Aircraft Rescue Firefighting • Fire Resistant Army Combat Clothing Ensemble Uniform Ensemble The FIRES system also includes a complete Self Contained Breathing Apparatus (SCBA) and spare air cylinders. A complete individual FIRES set is packaged in three deployment bags and two protective cases. A complete FIRES system consists of 7-12 FIRES individual sets, SCBA spares kit, systems manual, and TRICON shipping container.

U.S. Army Fires Kit Model

Qty

Model

Qty

U.S. Army Firefighter's Structural Ensemble

1

U.S. Army Firefighter's SCBA Repairs Kit

1

U.S. Army Firefighter's Proximity Ensemble

1

U.S. Army Firefighter's Storage Container

1

U.S. Army Firefighter's Wildland Ensemble

1

U.S. Army Fire Resistant Camouflage Uniform

1

U.S. Army Firefighter's SCBA Kit

1

Aluminized Turnout Jacket

Turnout Jacket

Turnout Trousers and Suspenders

US Army Firefighter’s SCBA Kit

FR ACU Jacket

FR ACU Trousers

36

800.948.9433

Aluminized Turnout Trousers and Suspenders

U.S. Army Firefighter’s Wildland Ensemble

Model

Qty

Model

Qty

Model

Model

Qty

Turnout Jacket

1

Traditional US Army Firefighter Helmet

1

NFPA Compliant Brush Firefighter Shirt 2

Qty

Boots

1

Turnout Trousers

1

Traditional Helmet- Face Piece

1

NFPA Compliant Brush Pants

2

Backpack

1

Traditional Suspenders

1

Googles

1

Wildland Full Brim Helmet

1

32oz Water Bottles

4

Gloves Moisture Barrier Liner

2

Hood

2

Helmet Headlamp

1

Personal Equipment Pack

1

NFPA Firefighter Structural Boots

2

Neck Shroud

1

Single Radio Harness

1

Work Gloves

2

TACOM KIT

U.S. Army Firefighter’s Structural Ensemble

KITS

TACOM KIT BREAKDOWNS

U.S. Army Firefighter’s Proximity Ensemble Model

Qty

Model

Qty

U.S. Army Firefighter’s SCBA Kit

Aluminized Turnout Jacket

1

Rubber ARFF Boots

1

Model

Qty

Model

Qty

Aluminized Turnout Trousers

1

ARFF Helmet with Aluminzed Shroud

1

SCBA Airmask

1

Bottles

2

Traditional Suspenders

1

Gear Bag

1

SCBA Canister

3

Protective Case For SCBA

1

Aluminum Gloves

2

Nomex Flight Gloves

1

Mask Case

2

Protective Case For Bottles

1

U.S. Army Fire Resistant Camouflage Uniform

U.S. Army Fire Fighter’s Storage Container

Model

Qty

Model

Qty

Model

Qty

Model

Qty

FR ACU Jacket

2

Flashlight With Clip

1

Storage Container

1

Shelving Sheets

4

FR ACU Trousers

2

Spanner Wrench

1

SCBA Repair Kit

1

Straping/Tie Down

25

PPE Bag

1

PPE Holder Strap

1

Protective Case

1

Systems Manual

1

Personal Escape System

1

FR Gloves With Velcro Strap

1

Lock And Key

2

Load Plan

2

Drag Strap

1

Helmet Band

1

Shelf Support Beams

8

U.S. Army Firefighter’s SCBA Repairs Kit

1

Flashlight with Clip

Helmet and Googles

ISO 9001:2008 CERTIFIED | ADSINC.COM

37

KITS SPEEDS® DECONTAMINATION SYSTEMS

SPEEDS® DECONTAMINATION SYSTEMS Technical Solutions Group® works with clients to develop a range of products and services to meet an unique and specific requirement. TSGI’s primary services include engineering, design and fabrication of tactical CBRN countermeasures and decontamination equipment, CBRN security force training, CBRN emergency operations planning and standardized operational procedures (SOP’s) development, mail and package screening system solutions, CBRNE threat and vulnerability assessments and CBRN security gap analysis.

Products from this manufacturer are available from ADS through GSA.

A

SPEEDS® 24H

A

The SPEEDS® Expedient Personnel Decontamination System (EPDS) is a tactical, self contained, independent and fully validated wet decontamination process (biological and radiological agents) and dry decontamination process (chemical agents) field personnel decontamination system.

Highly portable, the SPEEDS system permits rapid removal of personal protective equipment and effective decontamination of up to 24 personnel involved in a chemical, biological, radiological or nuclear (CBRN) event. The SPEEDS® system is designed especially for military and government tactical operations. Each system weighs 95 pounds, ships in a 32 x 24 x 19 unbreakable, watertight, dustproof, chemical resistant copolymer case with heavy duty wheels and multiple fold down carrying handles. System is man portable and can be used in wet or dry; day or night environments.

Contact ADS for ordering information

B

B

SPEEDS® 12S

Designed especially for rapid, tactical support to mission operations in a CBRN event, the SPEEDS® is a self contained, tactical, independent and fully validated decontamination system against CBRN agents, TIC’S and TIM’s for personnel decontamination. This unique system permits rapid removal of personal protective equipment and provides effective decontamination of up to 12 personnel involved in a chemical, biological, radiological or nuclear (CBRN) event. SPEEDS® is the only validated CBRN tactical decontamination system available on the market. It is deployed worldwide with DoD, OGA, state and local law enforcement and corporate security forces.

Contact ADS for ordering information

38

800.948.9433

LIGHTING EQUIPMENT

Tactical Beacons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Tactical Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

CATALOG PRODUCT LABELS Look for these symbols next to products in this catalog to quickly identify important ordering options or special characteristics.

Designated for the Army Rapid Fielding Initiative.

National Fire Protection Association Certified.

Products from this manufacturer are available from ADS through GSA. See these products on YouTube at: youtube.com/adstactical Look for these symbols and enter the adress to visit the manufacturers page on adsinc.com 39

LIGHTING EQUIPMENT TACTICAL BEACONS

Products from this manufacturer are available from ADS through GSA.

POWERFLARE® PF-200 SAFETY LIGHT / TACTICAL BEACON The PowerFlare® PF-200 Safety Light is an essential piece of equipment to have in a wide range of military, search and rescue, and law enforcement scenarios.

Unlike flashlights with alkaline batteries or light sticks, PowerFlare units can handle extreme temperatures, can be used in HAZMAT and EOD situations (intrinsically safe), and feature an amazing 10 year storage/shelf life with lithium batteries that never leak. The LED bulbs are unbreakable and operate for thousands of hours. The maximum effective operating depth is 80 feet.

IR Tactical Beacon applications include: • Personnel ID (IFF).

• NVG illuminator (confined space, building search, etc.).

• Mark drop areas, assets, targets (narco surveillance).

• Rescue Signal (extraction).

• Covert Helicopter Landing Zones (LZ).

• SCUBA diving and marine operations: waterproof to 80 feet & positively buoyant (floats).

• Visible light models also available: red, yellow, blue, green, white.

A full range of visible LED Colors available for a wide range of Safety Light applications: • Vehicle Breakdown, Traffic Control • Rescue Signal, Boating/Marine • SCUBA Diving • Tactical Police & Military Operations • Power Blackouts, Earthquakes • Hurricanes & Disasters

A B

Used as an tactical beacon, the PowerFlare® PF-200 can extend the range of night vision equipment by providing Infrared (IR) source illumination.

For example, an operator can deploy a PowerFlare unit into a search area and be able to see further with any generation of NVG equipment. This compact (4”) device emits 360° of IR LED light (invisible to the human eye), features multiple user-selectable flash patterns and is visible for up to 10 miles away with NVGs or FLIR (on low-light camera mode). The PF-200 is waterproof and so tough, you can run it over with a fire truck. PowerFlare IR Tactical Beacons are currently in use by military Special Forces as well as law enforcement tactical (SWAT) teams.

• LED Colors: Red, Amber, Blue, Green, White, & Infrared • Outer Shell: Yellow, Orange & Olive Drab Model

Item Number

PF-200 Safety Light with CR-123 Battery

PF210-XXX

PowerFlare Rechargeable 6-Pack

PF6P-210R-XXX

PowerFlare Beacon, Rechargeable Replacement

PF210R-R-XXX A

POWERFLARE ACCESSORIES

40

POWERFLARE SOFT-PACK KIT (6)

B

POWERFLARE SOFT-PACK KIT (8)

Model

Item Number

Kit includes PowerFlare logo bag (BAG8-O) each containing 6 PowerFlare Safety Lights.

Replacement Battery

BATT-CR123

Model

Item Number

Model

Item Number

Charger Box

CHGR-206A

SP6O-R-Y-EOF

BAG4-Y

PF200 8-Pack, inc. 8 ea. PF210-R-Y, 1 ea. BAG8-O, 8 ea. BATT-CR123

SP8O-R-Y

Yellow Carry Bag (holds up to 4 CR-123 units)

PF200 6-Pack, inc. 6 ea. PF210-R-Y, 1 ea. BAG8-O (EOF Kit)

Orange Carry Bag (holds up to 4 CR-123 units)

BAG4-O

SP6O-R-Y

BAG4-CG

PF200 8-Pack, inc. 8 ea. PF210-A-Y, 1 ea. BAG8-O, 8 ea. BATT-CR123

SP8O-A-Y

Green Carry Bag (holds up to 4 CR-123 units)

PF200 6-Pack, inc. 6 ea. PF210-R-Y, 1 ea. BAG8-O, 6 ea. BATT-CR123

Yellow Carry Bag (holds up to 8 CR-123 units)

BAG8-Y

PF200 6-Pack, inc. 6 ea. PF210-A-Y, 1 ea. BAG8-O, 6 ea. BATT-CR123

SP6O-A-Y

PF200 8-Pack, inc. 8 ea. PF210-RA-Y, 1 ea. BAG8-O, 8 ea. BATT-CR123

SP8O-RA-Y

Orange Carry Bag (holds up to 8 CR-123 units)

BAG8-O

Camouflage, Green Carry Bag (holds up to 8 CR-123 units)

SP8O-RB-Y

BAG8-CG

800.948.9433

PF200 6-Pack, inc. 6 ea. PF210-RA-Y, 1 ea. BAG8-O, 6 ea. BATT-CR123

Kit includes PowerFlare logo bag (BAG8-O) each containing 8 PowerFlare Safety Lights.

SP6O-RA-Y

PF200 8-Pack, inc. 8 ea. PF210-RB-Y, 1 ea. BAG8-O, 8 ea. BATT-CR123

PF200 6-Pack, inc. 6 ea. PF210-RB-Y, 1 ea. BAG8-O, 6 ea. BATT-CR123

SP6O-RB-Y

PF200 8-Pack, inc. 8 ea. PF210-B-Y, 1 ea. BAG8-O, 8 ea. BATT-CR123

SP8O-B-Y

PF200 6-Pack, inc. 6 ea. PF210-B-Y, 1 ea. BAG8-O, 6 ea. BATT-CR123

SP6O-B-Y

PF200 8-Pack, inc. 8 ea. PF210-G-Y, 1 ea. BAG8-O, 8 ea. BATT-CR123

SP8O-G-Y

PF200 6-Pack, inc. 6 ea. PF210-G-Y, 1 ea. BAG8-O, 6 ea. BATT-CR123

SP6O-G-Y

PF200 8-Pack, inc. 8 ea. PF210-W-Y, 1 ea. BAG8-O, 8 ea. BATT-CR123

SP8O-W-Y

PF200 6-Pack, inc. 6 ea. PF210-W-Y, 1 ea. BAG8-O, 6 ea. BATT-CR123

SP6O-W-Y

PF200 8-Pack, inc. 8 ea. PF210-I-OD, 1 ea. BAG8-CG, 8 ea. BATT-CR123

SP8CG-I-OD

PF200 6-Pack, inc. 6 ea. PF210-I-OD, 1 ea. BAG8-CG, 6 ea. BATT-CR123

SP6CG-I-OD

Products from this manufacturer are available from ADS through GSA.

youtube.com/adstactical

G3 LED FIRE RESCUE LIGHT The G3L Fire Rescue - a slightly larger, longer-running version of the G2LF - is a compact single-output LED flashlight developed for firefighters, paramedics, EMS personnel, and other emergency first responders. MILSTD-810 rated, which includes safe for explosive atmosphere. Constructed of tough, corrosion-proof Nitrolon® polymer and hard-anodized aluminum, the G3LF features a virtually indestructible, power-regulated LED and a micro-textured reflector to produce a smooth, brilliant 80-lumen beam with four times the light output of a typical two-D-cell flashlight. The pushbutton tailcap switch provides secure, ergonomic control.

• • • • • •

Virtually indestructible LED emitter regulated to maximize output and runtime Precision micro-textured reflector creates smooth, optimized spot beam Tough, lightweight Nitrolon® body with deep grid pattern for secure grip, aluminum bezel and tailcap Press tailcap switch for momentary-on, press further to click constant-on MIL-STD-810 rated, which includes safe for explosive atmosphere Extra-long fluorescent breakaway lanyard and reflective stickers included

The G3LF’s beam can be customized with three removable micro-lens inserts (included) that simultaneously diffuse the beam and control its divergence angle. The 20° divergence insert provides maximum lateral area coverage and the least amount of reflected light, appropriate for close work such as medical assistance; the 10° insert gives you a diffused beam with the most reach; and the 15° insert provides a balance between these two. The G3LF’s fluorescent yellow color and included reflective body stickers make it easy to find if dropped.

Model

Item Number

G3 LED Fire Rescue Light - Fluorescent Yellow

G3L-FYL

C

C

TACTICAL LIGHTING

See these products on YouTube at:

LIGHTING EQUIPMENT

adsinc.com surefire

D

G2 LED FIRE RESCUE LIGHT

D

G3D LED MULTI PURPOSE FIRE RESCUE LIGHT

The G2L Fire Rescue is a compact single-output LED flashlight developed for firefighters, paramedics, EMS personnel, and other emergency first responders. MIL-STD-810 rated, which includes safe for explosive atmosphere. Constructed of tough, corrosion-proof Nitrolon® polymer and hard-anodized aluminum, the G2LF features a virtually indestructible, power-regulated LED and a micro-textured reflector to produce a smooth, brilliant 80-lumen beam with four times the light output of a typical two-D-cell flashlight. The pushbutton tailcap switch provides secure, ergonomic control - press for momentary-on, press further to click constant-on.

The G2LF’s beam can be customized with three removable micro-lens inserts (included) that simultaneously diffuse the beam and control its divergence angle. The 20° divergence insert provides maximum lateral area coverage and the least amount of reflected light, appropriate for close work such as medical assistance; the 10° insert gives you a diffused beam with the most reach; and the 15° insert provides a balance between these two. The G2LF’s fluorescent yellow color and included reflective body stickers make it easy to find if dropped.

• Virtually indestructible LED emitter regulated to maximize output and runtime • Tough, lightweight Nitrolon® body with deep grid pattern for secure grip, aluminum bezel and tailcap • Press tailcap switch for momentary-on, press further to click constant-on • MIL-STD-810 rated, which includes safe for explosive atmosphere • Extra-long fluorescent breakaway lanyard and reflective stickers included • Weatherproof O-ring and gasket sealing

The G3D Fire Rescue - a slightly larger, longer-running version of the G2DF - is a compact, variable-output flashlight developed for firefighters, paramedics, EMS personnel and other emergency first-responders.

MIL-STD-810 rated, which includes testing safe in most explosive atmospheres. Constructed of tough, corrosion-proof Nitrolon® polymer and hard-anodized aluminum, the G3DF features a virtually indestructible, power-regulated LED and a micro-textured reflector to produce a smooth beam at three output levels.

Model

Item Number

Model

Item Number

G3d LED Multi Purpose Fire Rescue Light - Fluorescent Yellow

G3D-FYL

G2 LED Fire Rescue Light - Fluorescent Yellow

G2L-FYL

The G3DF’s beam can be customized with three removable micro-lens inserts (included) that simultaneously diffuse the beam and control its divergence angle. The 20° divergence insert provides maximum lateral area coverage and the least amount of reflected light, appropriate for close work such as medical assistance; the 10° insert gives you a diffused beam with the most reach; and the 15° insert provides a balance between these two. The fluorescent yellow color and reflective body stickers make it easy to find if dropped - crucial if you’re a firefighter, EMT, search and rescue team member, or public safety or utilities worker.

• Virtually indestructible LED emitter regulated to maximize output and runtime • Three output levels: low for extended runtime, medium for general use, high for maximum light • Three included micro-lens diffusers permit customization of beam pattern • Tough polycarbonate window resists impact • Tough, lightweight Nitrolon® body with deep grid pattern for secure grip, anodized aluminum bezel & tailcap • MIL-STD-810 rated safe for explosive atmospheres

ISO 9001:2008 CERTIFIED | ADSINC.COM

41

LIGHTING EQUIPMENT

Products from this manufacturer are available from ADS through GSA.

adsinc.com surefire

A

TACTICAL LIGHTING

A

G2D LED MULTI-OUTPUT FIRE RESCUE LIGHT

The G2D Fire Rescue is a compact, variable-output flashlight developed for firefighters, paramedics, EMS personnel, and other emergency first-responders. MIL-STD-810 rated, which includes testing safe in most explosive atmospheres. Constructed of tough, corrosion-proof Nitrolon® polymer and hard-anodized aluminum, the G2DF features a virtually indestructible, power-regulated LED and a micro-textured reflector to produce a smooth beam at three output levels.

The G2DF’s beam can be customized with three removable micro-lens inserts (included) that simultaneously diffuse the beam and control its divergence angle. The 20° divergence insert provides maximum lateral area coverage and the least amount of reflected light, appropriate for close work such as medical assistance; the 10° insert gives you a diffused beam with the most reach; and the 15° insert provides a balance between these two. The G2DF’s fluorescent yellow color and reflective body stickers make it easy to find if dropped crucial if you’re a firefighter, EMT, search and rescue team member, or public safety or utilities worker.

• Virtually indestructible LED emitter regulated to maximize output and runtime • Three output levels: low for extended runtime, medium for general use, high for maximum light • Three included micro-lens diffusers permit customization of beam pattern • Tough polycarbonate window resists impact • Tough, lightweight Nitrolon® body with deep grid pattern for secure grip, anodized aluminum bezel & tailcap • MIL-STD-810 rated safe for explosive atmospheres

B

Model

Item Number

G2D LED Multi-Output Fire Rescue Light - Fluorescent Yellow

G2D-FYL

B

G2 LED FIRE RESCUE HELMET MOUNT KIT

The G2L Fire Rescue Helmet Mount Kit includes our G2L Fire Rescue flashlight and a Blackjack helmet mount, enabling you to securely attach this specially designed light to the rim of most firefighter helmets as well as other helmet types - for hands-free illumination.

The heavy-duty Blackjack helmet mount, machined from high-strength aluminum and finished in corrosionresistant black anodizing, holds the G2LF within the mount ring via a single hex-head set screw; the mount’s helmet rim clamp uses dual hex-head set screws for secure attachment.

C

Model

Item Number

G2 LED Fire Rescue Helmet Mount Kit - Fluorescent Yellow

G2LF-FYL KIT02

C

M6® GUARDIAN®

Ultra high-output incandescent flashlight for tactical, duty, or searchlight use. Effectively a wider-bodied, slightly heavier, more powerful version of our M4. Produces a smooth, brilliant, pre-focused, long-range beam with over twelve times the light of a big two-D-cell flashlight - bright enough to temporarily blind and disorient a person by impairing his night-adapted vision. Light output can be doubled to a stunning 500 lumens with included MN21 lamp. Has integral shock-isolation system to withstand repeated recoil or impact.

Model

Item Number

M6® Guardian®

M6

E D

D

E

POLYSTINGER LED HAZ-LO

• Helmet Lighting Kit - Div 2 4AA Lux® with White LED, alkaline batteries, Black Jack mount, helmet band.

• Blister packaged.

• Color: Yellow

• PolyStinger LED HAZ-LO 120V AC/12VDC • Color: Yellow

42

HELMET LIGHTING KIT - DIV 2 4AA LUX®

Model

Item Number

Model

Item Number

PolyStinger LED HAZ-LO

76412

Helmet Lighting Kit - Div 2 4AA Lux®

68270

800.948.9433

SURVIVOR® LED

• Survivor LED with Charger/Holder and AC & DC cords • Color: Orange Model

Item Number

Survivor® LED

90503

G

KNUCKLEHEAD®

F

• Knucklehead with Clip • 120V AC/12V DC Steady Charge • Color: Orange Item Number

Knucklehead®

90657

H

H

TACTICAL LIGHTING

Model

G

POLYTAC 90®

• PolyTac 90 with Gear Keeper and lithium batteries • Color: Orange Model

Item Number

PolyTac 90®

88832

I

FIRE VULCAN® LED

• Fire Vulcan LED Standard System dual rear LEDs, quick release shoulder strap.

• 120V AC/DC. • Color: Orange Model

Item Number

Fire Vulcan® LED

44450

J

• • • •

J

E-Flood FireBox Standard System - with dual rear LEDs. 120V AC/DC Shoulder strap & mounting rack Color: Orange Item Number

E-Flood® Firebox®

45811

E-SPOT® FIREBOX®

• E-Spot FireBox Standard System with 120V AC/12V DC charge cords, shoulder strap & mounting rack • Color: Orange Model

K

L

Item Number

E-Spot Firebox ®

L

I

E-FLOOD® FIREBOX®

Model

K

LIGHTING EQUIPMENT

F

®

45861

LITEBOX®

• LiteBox Standard System with 120V AC/DC, shoulder strap & mounting rack (8WS) • Color: Orange Model

Item Number

Litebox®

45116

M

3AA HAZ-LO®

• 3AA HAZ-LO® with alkaline batteries.

• Rubber & Elastic Straps.

• Color: Yellow Model

Item Number

3AA HAZ-LO®

61200

N

M

N

VANTAGE® LED

• Vantage® LED Tactical Helmet Light with White LED. • Boxed Model

Item Number

Vantage® LED

69140

ISO 9001:2008 CERTIFIED | ADSINC.COM

43

LIGHTING EQUIPMENT TACTICAL LIGHTING

adsinc.com pelican

Products from this manufacturer are available from ADS through GSA.

B

A

C

A 9430 REMOTE AREA LIGHTING SYSTEM (RALS)

B 9430IR INFRARED REMOTE AREA LIGHTING SYSTEM (RALS)

• • • • • •

Pelican’s new 9430IR (infrared) spotlight reaches down-range to provide situational awareness without compromising stealth. 24 infrared lamp odules generate light visible only to forces equipped with night vision equipment. Capable of operating 75 yards out, the 9430IR extends the tactical advantage of night vision technology.

Up to 15 hours of burntime 2000 lumens of brightness Maintenance Free LED Array with life expectancy of 50,000 hrs Fully extendable mast with 360 degree rotating head Waterproof Rubber Activation Switch Mast Extension Lock

Model

Item Number

9430 Remote Area Lighting System

9430

Model

Item Number

9430IR Infrared Remote Area Lighting System

9430IR

D

C 9470 REMOTE AREA LIGHTING SYSTEM (RALS)

E

9440 RALS - Collapsed

9440 RALS - Deployed

Using solid-state mounted LED’s coupled with a thermally efficient light engine and our 1610 Pelican Protector™ Case, the RALS 9470 gives the user the ultimate maintenance free portable floodlight station to get the job done efficiently, safely and on time. The RALS 9470 houses all four of it’s light heads and it’s multi-stage charger for that total self contained convenience, it is also equipped with a telescopic handle and rugged wheels for ease of transport.

Model

Item Number

9470 Remote Area Lighting System

9470

D

1560 CASE FOR 9440 RALS

• • • •

Interior dimensions: 20.37” x 15.43” 9.00” Exterior dimensions: 22.06” x 17.93” x 10.43” Options: With Foam, No Foam or With Padded Dividers Color: Black, Desert Tan, Olive Drab or Green

Model

Item Number

1560 Case

1560

E

9440 RALS

The 9440 moves fast to light up ravines, confined spaces, riverbanks... anyplace generator lights can’t go. Deployed, the mast extends 7 feet high, shining light over low obstructions encountered by traditional lantern style lights. With a 120 degree beam spread and up to 2400 lumens, the entire emergency area will have the light you need for a safe and swift operation. The 9440 is maintenance free, using super tough LED lamp modules and NiMH batteries for up to 6 hours of continuous light.

• Color: Black or Yellow

44

800.948.9433

Model

Item Number

9440 RALS

9440

PERSONAL PROTECTION

Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Eyewear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Boots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Hoods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Helmets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Turnout Gear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

CATALOG PRODUCT LABELS Look for these symbols next to products in this catalog to quickly identify important ordering options or special characteristics.

Designated for the Army Rapid Fielding Initiative.

National Fire Protection Association Certified.

Products from this manufacturer are available from ADS through GSA. See these products on YouTube at: youtube.com/adstactical Look for these symbols and enter the adress to visit the manufacturers page on adsinc.com 45

PERSONAL PROTECTION

A

B

GLOVES

A

D

E

Item Number

Certification

GL-SGKCG (Gauntlet)

NFPA 1971, 2007 Edition Structural

GL-SGKCW (Wristlet)

NFPA 1971, 2007 Edition Structural NFPA 1999 EMS, NFPA 1951 Technical Rescue & Recovery, 1951 Technical Rescue/Utility

B

NON-ECLISPE COWHIDE

• • • •

Eversoft Cowhide Crosstech Moisture Barrier Leather Gauntlet Sizes: XX-Small - XX-Large

Model

Item Number

Non-Eclispe Cowhide

6550

C

C

F

Model

Item Number

Eclipse

6400

D

NON-ECLIPSE ELK MODELS

• • • • •

Elk Polyurethane Moisture Barrier Knitwrist Sizes: XX-Small - XX-Large

Model

Item Number

Non-Eclipse Elk Models

5500 4K3

E

NON-ECLISPE ELK

• • • •

Elk Polyurethane Moisture Barrier Leather Gauntlett Sizes: XX-Small - XX-Large

Model

Item Number

Non-Eclipse Elk

5550

F

800.948.9433

ECLIPSE

• Convertible Cuff: Wear as a gauntlet, knitwrist or inner knitwrist.

One style serves all three purposes.

• Unique Swing Thumb: Works the way your hand does, with thumb opposing fingertips.

• 360° Inner Pull Tab: Extra strength whenever you pull. Round shape holds glove open for better drying.

• Extra Wide Opening: Makes getting a wet glove off and on easier.

• Eversoft Cowhide Palm, Elk Back: Soft durability on the palm, pliable stretch on the back.

• Full Width Additional Palm Strip: Extra slash protection and grip enhancement.

• Sizes: XX-Small - XX-Large

• • • • •

46

STRUCTURAL FIRE FIGHTING GLOVE

• Exclusive Kangaroo and Digiroo Leathers Offer Exceptional Durability, Grip, and Dexterity • Air Spacer™ Thermal Architecture Traps Air for Thermal Protection without Traditional Bulk • Kevlar/Nomex Lining and Breathable CrosstechÆ Moisture Barrier Enhance Protection from Heat, Slash, and Steam- related Burns • Multi-Layer 3-D Styling and Bubble-Flex/Flex-Tuck Features Permit More Natural Hand Movements, Adding to Dexterity and Overall Comfort • Regular and Cadet Sizes: XX-Small - XXX-Large

NON-ECLIPSE PROXIMITY Aluminized Pbi/Kelvar/Rip Stop/Elk Crosstech Moisture Barrier J-Fire Cuff Sizes: XX-Small - XX-Large

Model

Item Number

Non-Eclipse Porximity

GL-BPR-RWA-ML

G

adsinc.com sperian-protection

UVEX STEALTH GOGGLE

• Futuristic, low profile design for chemical splash and impact.

• Toric lens provides superior optics and peripheral vision.

• Rx insert available.

• Unsurpassed comfort.

PERSONAL PROTECTION

Products from these manufacturer are available from ADS through GSA.

• Easiest lens replacement system available.

• Indirect ventilation system minimizes fogging quick adjust headband.

• Lens Color: Clear, Amber, Gray • Body Color: Gray or Teal Item Number

UVEX Stealth Goggle NSN: 4240-01-451-8000

S212

Accessories

Item Number

Gray Durastreme Lens NSN: 4240-01-516-3452

S99-S3301D-MIL

Clear Durastreme Lens NSN: 4240-01-516-3460

S99-S3300D-MIL

Durastreme Replacement Lens Clear (Pack of 10) NSN: 4240-01-516-3469

S99-S6950D-MIL

EYEWEAR

Model

G

H H

XC COMBO PACK

All lenses incorporate the new dual flow coating technology which places the anti-fog coating on the inner surface and the anti-scratch coating on the outer surface. Trade name Durastreme.

• 1 clear spectacle assembly on frame • 1 lanyard • 1 grey sunglass replacement lens • 1 crush proof black case approved by Natick • 1 drawstring bag to protect the extra lens that • 1 bottle of Ops Drops anti-fog reapplication drops also acts as a cleaning cloth.

• Made in USA Model

Item Number

XC Combo Pack NSN: 4240-01-516-5361

S99-S3399-MIL3A

AUTHORIZED PROTECTIVE EYEWEAR LIST (APEL) APPROVED

RFI

I

GENESIS COMBO PACK

All lenses incorporate the new dual flow coating technology which places the anti-fog coating on the inner surface and the anti-scratch coating on the outer surface. Trade name Durastreme.

• 1 clear spectacle assembly on frame • 1 lanyard • 1 grey sunglass replacement lens • 1 crush proof black case approved by Natick • 1 drawstring bag to protect the extra lens that • 1 bottle of Ops Drops anti-fog reapplication drops also acts as a cleaning cloth.

• Made in USA Model

Item Number

Genesis Combo Pack NSN: 4240-01-552-4131

S99-S3291-MIL5A

I

AUTHORIZED PROTECTIVE EYEWEAR LIST (APEL) APPROVED

RFI

adsinc.com mcnett

J J

OP DROPS™

The Op Drops™ kit provides superior lens cleaning and anti-fog protection attached to MicroNet High Performance Microfiber Cleaning Cloth/Carry Pouch. Op Drops liquid formula provides fog free viewing and gentle cleaning on all types of glasses, binoculars, scopes, goggles, hockey masks and all types of eyewear.

Model

Item Number

Op Drops™ 1.25 oz.

40725

Op Drops™ .25 oz.

44053

1.25 oz

.25 oz

ISO 9001:2008 CERTIFIED | ADSINC.COM

47

PERSONAL PROTECTION BOOTS

PRO MODEL 5050 STRUX’IM•I•TY™ PROXIMITY/STRUCTURAL BOOTS • Athletic construction for unencumbered performance & agility.

• Specially designed profiled boot shaft accommodates large calves while still fitting comfortably under proximity pants.

• High performance fire resistant & waterproof leather has been independently tested to stand up against the harsh environment of JP8 & other flight line chemicals.

• Goodyear welt is made to withstand the harsh proximity environment & is proven for more than 20 years in the fire service.

• Full height bootie with 7.5 oz of Virgin Kevlar felt quilted to Cambrelle® & laminated to Crosstech® provides the same thermal protection as structural firefighting boots. The aluminized shield adds a patent pending double layer of radiant protection.

• Vibram® lug soles with Fire & Ice compound are securely bonded & stitched for the greatest protection possible in extreme radiant heat conditions.

• Steel bottom plate & shank combine with the double radiant layers & aluminized shield to keep heat transfer away from the feet in high heat conditions.

• Lightweight & comfortable are nearly 4 pounds lighter that traditional ARFF rubber boots.

• Certified to NFPA 1971, 2007 edition for Proximity & Structural Fire Fighting • APT Barcode – Departmental NFPA 1851 Tracking.

• Made in USA • C Width Sizes: 8-13, 14 • D, E, EEE Width Sizes: 5-13, 14, 15, 16

Please contact ADS for ordering information

A

B

A LEATHER/ FABRIC FIRE FIGHTING BOOT

B

• • • • •

1 Leather and 1 Rubber Fire Fighting Boot 1 Aircraft Rescue Fire Fighting Boot 1 Wildland Fire Fighting Boot Barry Admendment Compliant The Widest Size Range on the Market (5-15) – Up to 5 Widths on Some Styles and Sizes – Special Make-Up Sizes are Also Available • Structural Rubber Boot and ARFF Boot Available in Women’s Sizes • The Same Basic Boot Worn in New York (FDNY), Atlanta, Sacramento, Kansas City, Montgomery, Detroit, Indianapolis and Many DoD Fire Departments.

• Please Contact Your ADS Representative For More Information and Ordering Specifications.

48

C

RUBBER FIRE FIGHTING BOOT

• • • • •

1 Leather and 1 Rubber Fire Fighting Boot 1 Aircraft Rescue Fire Fighting Boot 1 Wildland Fire Fighting Boot Barry Admendment Compliant The Widest Size Range on the Market (5-15) – Up to 5 Widths on Some Styles and Sizes – Special Make-Up Sizes are Also Available • Structural Rubber Boot and ARFF Boot Available in Women’s Sizes • The Same Basic Boot Worn in New York (FDNY), Atlanta, Sacramento, Kansas City, Montgomery, Detroit, Indianapolis and Many DoD Fire Departments.

• Please Contact Your ADS Representative For More Information and Ordering Specifications.

Model

Item Number

Model

Item Number

Men’s Rubber Fire Fighting Boot

5128-B

Leather/Fabric Fire Fighting Boot

5006

Women’s Rubber Fire Fighting Boot

3129-B

800.948.9433

C

ARFF FIRE FIGHTING BOOTS

• ARFF Boot Advantage - The only boot certified for proximity fire fighting NFPA 1971, 2007 edition • Meets the Federal Aviation Administration Regulation Part 139 as it pertains to protective clothing requirements for Airport Fire Fighting and Rescue Personnel.

• (FAA-AC 150/5210-14A July 13, 1995) • Please Contact Your ADS Representative For More Information and Ordering Specifications.

Model

Item Number

Men’s ARFF Fire Fighting Boot

6211-B

Women’s ARFF Fire Fighting Boot

6210-B

PERSONAL PROTECTION HOODS

300-22667NFN

300-22557NFN

HD-FCN

HD-FCPBIR

HOODS

100% Nomex (2-layer wt., 16.5 - 17.0 oz) – To meet Thermal Protection Performance (TPP) requirements, Nomex™ hoods (creamy white in color) were beefed up to 8.25 - 8.5 oz, 100% Nomex knit. This material handles perspiration only moderately well and, while on the heavy side, is on the economical end of the scale. Pbi/Lenzing PFR Rayon (2-layer wt. 13.0 oz) – Bronze in color, the 6.5 oz knit is a 20% Pbi, 80% PFR Rayon blend. Yet another step up in heat resistance, it also handles perspiration extremely well and is often chosen as being the most comfortable of the materials. While a bit more expensive, it has been the choice for overall best insulation, heat resistance and comfort for almost 15 years. Eagle HTC™ Carbon Blend (2-layer wt. 13.5 oz) Combining carbon fiber, Kevlar, and P-84™, this blend offers superior strength compared to other carbon blends on the market. Black.

HD-FCN

HD-FCPBIR

Outer Shell

300-22667NFN

2 Layers HTC Carbon 2 Layers Pbi Blend

300-22557NFN

2 Layers Nomex

2 Layers Pbi Blend

Design

American Firewear

American Firewear

American Firewear

American Firewear

Top

Non-Ventilatiing

Non-Ventilatiing

Non-Ventilatiing

Non-Ventilatiing

Styling

Full Drape

Full Drape

Face and Chest

Face and Chest

Face Opening

Natural Fit

Natural Fit

Natural Fit

Natural Fit

Top Seaming

Flatlock

Flatlock

Flatlock

Flatlock

ISO 9001:2008 CERTIFIED | ADSINC.COM

49

PERSONAL PROTECTION

B

HELMETS

A

A

UST TRADITIONAL SERIES NFPA 1971, 2007

B

UST structural firefighter helmets provide classic traditional style in an affordable, easy-to-maintain design.

With an outer shell made of Thermoglas®, the UST provides toughness and durability.

• Black high-heat Thermoplastic inner shell with • 4” hard-coated optically-correct faceshield or Urethane impact liner Bourke eyeshields with goggles • Sure-Lock® ratchet headband • Removable fire resistant cotton brow pad • 6-point nylon crown straps with crown pad • Cotton crown pad • Nomex® chinstrap with quick-release buckle • Brass eagle for 5” or 6” leather front and postman’s slide fastener • Available in glossy or matte finish • Black rip-stop Nomex ear/neck protector) • Leather front sold separately • Leather ratchet cover • Available with TrakLite Integrated Helmet Lighting Multiple configurations available. Contact ADS for ordering information.

FXA1 FIREDOME HELMET NFPA 1971, 2007/US NAVY

FX composite helmets are resistant to chemical attack and stable under high heat exposure. The FX is a fiberglass, contemporary style structural fire helmet designed to withstand frequent exposure to chemicals and hydrocarbons.

• Fiberglass outer shell • Black Rip-stop PBI®/Kevlar®, moisture barrier • Urethane foam impact liner Nomex ear/neck protector with throat strap • Black high-heat inner shell • Removable fire resistant cotton brow pad • Sure-Lock ratchet headband and 6-point nylon • Cotton crown pad crown strap • Scotchlite® reflective striping • Nomex chinstrap with quick-release buckle • Available with TrakLite Integrated Helmet Lighting • 4” hard-coated optically-correct faceshield Multiple configurations available. Contact ADS for ordering information.

TRAKLITE™ INTEGRATED LIGHTING Many Bullard helmets are available with Bullard TrakLite™ helmet lighting. Featuring multiple forward-facing, long lasting, bright LED lights, TrakLite is integrated into the helmet design for excellent weight balance and illumination. Added safety features include the rear buddy indicator light, long battery life (uses four AAA batteries) and easy on/off operation.

Multiple configurations available. Contact ADS for ordering information.

50

800.948.9433

PERSONAL PROTECTION

AX ARFF SERIES FIREDOME® HELMET (FX) NFPA 1971, 2007

HELMETS

The AX helmet is a specialized fire helmet with components designed to meet the needs of Air Rescue Firefighting (ARFF). AX Series helmets are engineered specifically for the adverse environmental conditions during proximity fire fighting incidents that release high levels of radiant, convective and conductive heat.

• Fiberglass outer shell • Nomex® chinstrap with quick-release • Urethane impact liner buckle and postman’s slide fastener • Black high-heat Thermoplastic inner shell • Aluminized PBI®/Kevlar® helmet cover • Sure-Lock® ratchet headband and 6-point • Aluminized PBI/Kevlar shroud nylon crown strap • 6” gold-coated optically-correct faceshield Multiple configurations available. Contact ADS for ordering information.

C

C USRX URBAN SEARCH AND RESCUE HELMET NFPA 1951-2007 AND NFPA 1971, 2007

USRX rescue helmets are engineered for extreme search and rescue conditions. Featuring a streamlined design, USRX rescue helmets incorporate recommendations from USAR teams and other rescue professionals.

• Inner crown system • Standard headband with brow pad • Black Rip-stop Nomex® ear/neck protector • Quick-Attach goggle • Quick-Release 3-point chinstrap • Edge beading • Leather ratchet cover • Sure-Lock® ratchet suspension Multiple configurations available.

Contact ADS for ordering information.

ISO 9001:2008 CERTIFIED | ADSINC.COM

51

PERSONAL PROTECTION HELMETS

A HDO BEN 2 PLUS TRADITIONAL STYLE HELMET

A

• • • • • • • •

Model

Item Number

HDO Ben 2 Plus Traditional Style Helmet

HT-BF2-HDO

B B HDO BEN 2 PLUS MODERN STYLE HELMET

• • • • • • • •

C EMS STYLE HELMETS

C

• Color: Black, White, Red, Yellow, Blue, Orange Shell Contact ADS for Ordering Information

D LITE FORCE PLUS PROXIMITY STYLE HELMET

• 6” x .130” Gold Coat Face Shield • Nomex Quick Release Chinstrap with Postman Slide • Aluminized Pbi™ Ear Covers with W.L. Gore Moisture Barrier and Thermal Liner (Standard Lite Force Proximity) or J-Fire Aluminized Pbi™ Ear Covers with W.L. Gore Moisture Barrier and Thermal Liner 8 Reflexite Lime Trapezoids • Winter Liner • NFPA 1971, 2007 Edition Certified • Lifetime Warranty Against Defects in Manufacturing • Color: Black, White, Red, Yellow, Blue, Orange, Green Shell Model

Item Number

Standard Lite Force Proximity

HT-LF2-PROX

J-Fire Lite Force Proximity

HT-LF2-PROX-J-FIRE

E

WILDLAND HELMETS

• • • • • • •

4” x .110” APEC Face shield or EZ-Flips Nomex 4-Point with Quick Release Chinstrap Black Nomex/Flannel HDO Ear Covers 4, 1” x 4” Lime Reflexite 1” x 14” Trim Bars NFPA 1977, 2005 Edition Certified Lifetime Warranty Against Defects in Manufacturing Color: Black, White, Red, Yellow, Blue, Orange Shell

Contact ADS for Ordering Information

52

4” x .150” APEC Face shield or EZ-Flips Nomex Quick Release Chinstrap with Postman Slide Black Nomex/Flannel HDO Ear Covers 8 Reflexite Lime Trapezoids Winter Liner NFPA 1971, 2007 Edition Certified Lifetime Warranty Against Defects in Manufacturing Color: Black, White, Red, Yellow, Blue, Orange, Green Shell

800.948.9433

E

4” x .110” APEC Face shield or EZ-Flips Nomex Quick Release Chinstrap with Postman Slide Black Nomex/Flannel HDO Ear Covers 5 Reflexite 1” x 14” Lime Bars Winter Liner NFPA 1971, 2007 Edition Certified Lifetime Warranty Against Defects in Manufacturing Color: Black, White, Red, Yellow, Blue, Orange, Green Shell

Model

Item Number

HDO Ben 2 Plus Modern Style Helmet

HT-LF2-HDO

D

G

PERSONAL PROTECTION

F

H

HELMETS

CAIRNS 660C METRO COMPOSITE FIRE HELMET F

NFPA-approved, durable fiberglass composite.

• Non-corroding, high-temperature-resistant, face shield/goggle hardware.

• Rugged, high-temperature edge will not melt or drip.

• Easy front headband adjustment for proper SCBA mask fit.

• Simple rear ratchet height adjustment to fit all head sizes.

• Headband (6 3/8 to 8 3/8) fits a wide variety of head sizes.

• Durable helmet hanger fits on large hooks and resists bending.

• Minimal parts for lower service cost and easier maintenance.

• Cairns-exclusive system provides an extra margin of safety - demand it!

• Water-based foam for resistance to high heat and flame.

G

CAIRNS 360R RESCUE HELMET

H

• • • • • • • • •

Lightweight, low-profile performance Through-color, thermoplastic shell Non-corroding, high-temperature-resistant, face shield/goggle hardware.

Rugged, high-temperature edge will not melt or drip.

Easy front headband adjustment for proper SCBA mask fit.

Simple rear ratchet height adjustment to fit all head sizes.

Headband (6 3/8 to 8 3/8) fits a wide variety of head sizes.

Durable helmet hanger fits on large hooks & resists bending.

Minimal parts for lower service cost & easier maintenance.

Unmatched performance for extreme conditions.

• Non-corroding, high-temperature-resistant, face shield/goggle hardware.

• Rugged, high-temperature edge will not melt or drip.

• Easy front headband adjustment for proper SCBA mask fit.

• Simple rear ratchet height adjustment to fit all head sizes.

• Headband (6 3/8 to 8 3/8) fits a wide variety of head sizes.

• Durable helmet hanger fits on large hooks & resists bending.

• Minimal parts for lower service cost & easier maintenance.

• Exclusive shell release system for an extra margin of safety.

• Unique tube-lock system absorbs the shock of an impact.

Contact ADS for Ordering Information

CAIRNS® CLASSIC 1000

Contact ADS for Ordering Information

Contact ADS for Ordering Information

I

I

CAIRNS COMMANDO HP3

Low-profile design is ideal for EMS and rescue operations. Full foam impact cap used for increased impact protection. Durable fiberglass shell resists cracking and chipping.

• Non-corroding, high-temperature-resistant, face shield/goggle hardware.

• Rugged, high-temperature edge will not melt or drip.

• Easy front headband adjustment for proper SCBA mask fit.

• Simple rear ratchet height adjustment to fit all head sizes.

• Headband (6 3/8 to 8 3/8) fits a wide variety of head sizes.

• Durable helmet hanger fits on large hooks & resists bending.

• Minimal parts for lower service cost & easier maintenance.

Contact ADS for Ordering Information

CAIRNS N5A NEW YORKER LEATHER HELMET J

J

The original OSHA-approved leather helmet, individually hand-crafted to meet today’s OSHA standards with over 170 years of dependable performance.

• Handcrafted, 100% leather shell.

• The Cairns 5-year shell replacement warranty.

• Non-corroding, high-temperature resistant face shield/goggle hardware.

• Durable helmet hanger fits on large hooks & resists bending.

• Minimal parts for lower service cost & easier maintenance.

• High-temperature impact cap increases thermal & impact protection.

• Comfortable fit for head sizes Medium (6 3⁄8 - 7 1⁄2) & Large (7 5⁄8 - 8 3⁄8).

Contact ADS for Ordering Information

Other styles of Cairns helmets available.

Please contact ADS for additional information.

ISO 9001:2008 CERTIFIED | ADSINC.COM

53

PERSONAL PROTECTION

B

C

D

E

TURNOUT GEAR

A

A GENERAL PURPOSE/ EXTRICATION JUMPSUITS

• Action-Back Design • 2” Lime-Yellow/Silver 3M™ Scotchlite™ Triple Trim at Upper Arms, Pants Hem and across “Action-Back” • 15” Padded Elbows on non-NFPA Style • 22” Padded Knees on non-NFPA StyleFR Indura® Cotton lined sleeves on non-NFPA model • Rounded Stand-up Collar with Velcro® Throat Tab • Pencil/Flashlight Pocket on Left Sleeve • Crossover Stethoscope Pocket with Utility Loop • Special Multi-pocket on Right Thigh (Five Pockets in One, Including a Scissors Pocket with Strap and Snap Holder) • One Large Slant-top Semi-Bellows Pocket with Velcro® Closure Flap on Left Thigh • 9” Radio Pocket with Mic Tab and Utility Strap • Two Inside Pockets with Pass Through Pockets • Two Rear Patch Pockets with Flap • 12” Zippers at Leg Cuffs • Velcro® Closures on All Cuffs • Two Velcro® Take-up Straps on Waist – 8” Total Take-up • Extra Utility Loop on Waistband • Inside Hanger Loop • Reinforced Stress Points • Front Closure: Zipper Inner, Velcro™ Outer • Full Rear Elastic Waist • Lock stitched Seams: Minimum 8 stitches per Inch; Heat resistant Nomex® Thread Contact ADS for Ordering Information Specify options when ordering 2” Red/Orange Silver 3M™ Scotchlite™ triple trim in at cuffs & hems 2” or 3” Reflective 3M™ Scotchlite™ - Lettering applied to patchLime/Yellow or Red/Orange

EMS JUMPSUITS

Contact ADS for Ordering Information Specify options when ordering

C

STRUCTURAL 32Q2

• Color: Black, Bronze Model

Item Number

Structural

32Q2

2” Red/Orange / Orange/Silver 3M™ Scotchlite™ Triple Trim

D

Lettering on Patch - 2” or 3” 3M™ Scotchlite™– Lime/Yellow or Red/Orange

• Color: Black, Yellow, Rust, Navy, Khaki, Gold

Velcro® Lettering Patch 3” Reflective Maltese Cross or Star of Life on Pocket

STRUCTURAL 3412

Model

Item Number

Structural

3412

STRUCTURAL 2412

8” Reflective Maltese Cross or Star of Life applied to patch

E

3” Reflective Maltese Cross or Star of Life on radio pocket

Leather Cuffs

• Color: Black, Yellow, Red, Navy, Khaki, Tan, Royal Blue, Natural

8” Reflective Maltese Cross or Star of Life applied to patch

6” Radio Cuffs

Model

Item Number

Velcro Lettering patch in place of standard sewn patch

Yellow, Red, Royal Blue, Tan, Navy Blue, Black

Structural

2412

®

Leather Cuffs 6” Radio Cuffs Yellow, Red, Royal Blue, Tan, Navy Blue, Black

54

B

• Action back design • 2” Lime-Yellow/Silver 3M™ Scotchlite™ Triple Trim at Upper Arms, Pants Hem and Across “Action-Back” • Rounded stand- up collar with Velcro™ throat tab • Pencil/Flashlight Pocket on Left Sleeve • Crossover Stethoscope Pocket with Utility Loop • Special Multi-pocket on Right Thigh (Five Pockets in One, Including a Scissors Pocket with Strap and Snap Holder) • One Large Slant-top Semi-Bellows Pocket with Velcro™ Closure Flap on Left Thigh • 9” Radio Pocket with Mic Tab and Utility Strap • Two Inside pockets with Pass Through Pockets • Two Rear Patch Pockets with Flap • 12” Zippers at Leg Cuffs • Velcro™ Closures on All Cuffs • Two Velcro™ Take-up Straps on Waist • Extra Utility Loop on Waistband • Inside Hanger Loop • Reinforced Stress Points • Front Closure: Zipper Inner, Velcro™ Outer • Full Rear Elastic Waist • Lock stitched Seams: Minimum 8 Stitches per Inch; Heat Resistant Nomex® Thread

800.948.9433

PROXIMITY

Model

Item Number

Proximity

7612

WILDLAND JUMPSUIT Two-way Inner Zipper with Velcro® Closure Stand-up Collar with Velcro® Throat Tab 9” Radio Pocket with Mic Tab and Utility Strap on Left Chest 12” Leg Zippers at Cuffs Single Rear Patch Pocket with Flap Two Large Slant-top Semi-bellows Pockets w/ Velcro® Closure Flap Pass Through Waist Pockets Velcro® Cinch Straps at Waist, Wrists and Cuffs

TURNOUT GEAR

G

• • • • • • • •

G

F

PERSONAL PROTECTION

F

• Color: Silver

Contact ADS for Ordering Information Specify options when ordering: 2” Lime/Yellow/Silver or Red/ Orange Silver 3M™ Scotchlite™ Trim 2” or 3” Reflective 3M™ Scotchlite™ Lettering in Lime/ Yellow or Red/Orange to match trim Velcro® Lettering Patch in place of a standard sewn patch 3” Reflective Maltese Cross or Star of Life on Radio Pocket Flap 8“ Reflective Maltese Cross or Star of Life applied to patch 6” Radio Pocket in place of 9” Standard Radio Pocket Leather Cuffs Leather Knees - Unpadded Suspenders for pants: S94 Green “Wildland” or S95 Blue “RESCUE” 4 Point Alligator clip attachment Yellow, Red, Royal Blue, Tan, Navy Blue, Black

H

H

INCIDENT RESPONSE JUMPSUIT

• • • • •

Front Shoulder Zippers 16” Zippers at Leg Cuff Black Nomex® Knit wrist in Sleeve Underarm Gussets for Extra Stretching Ability 2” Lime-Yellow/Silver 3M™Scotchlite™ Triple Trim at Sleeve Cuff, Upper Arms, Front Shoulder, Across “Action-Back”, Front and Back of Waistband, Double Row Diagonally Below Knee 22” Padded Knees and Shins 15” Padded Elbows and Forearms Rounded Stand-up Collar with Velcro® Throat Tab Special Multi-pocket on Right Chest (Three Pockets in one) with Full Velcro® Closure Two Large Slant-top Semi-Bellows Pockets with Velcro® Closure Flap on Thighs 6” Radio Pocket with Mic Tab and Utility Strap Two Inside Pockets with Pass Through Pockets Two Rear Patch Pockets with Flap Sleeves Lined with Indura Cotton Velcro® Closures on All Cuffs Side Elastic Waistband Extra Utility Loop on Waistband Inside Hanger Loop Reinforced Stress Points Front Closure: Zipper Inner, Velcro® Outer

• • • • • • • • • • • • • • •

I

DYNA-FIT SUSPENDER

• Dyna-Fit suspenders have no mid-back hardware. Float is accomplished through an interplay of the suspender loop. This is probably the strongest and most comfortable firefighter suspender ever offered on the market.

• 8-Point Dyna-Fit • Circle Hardware with traditional metal hooks.

• Dyna-Fit suspenders are blue with red elastic straps.

• Quick Adjust Option: Suspenders with Quick Adjust mechanism to allow snugged fit after easy donning (no need to duck shoulders) • Padding Option: Shoulder suspension cushioning Contact ADS for Ordering Information

I

Contact ADS for Ordering Information Specify options when ordering 2” Red/Orange 3M™ Scotchlite™ triple trim in place of Lime/Yellow triple trim Lettering on Patch - 2” or 3” 3M™ Scotchlite™– Lime/Yellow or Red/Orange Velcro® Lettering Patch in place of a standard sewn patch 8” Reflective Maltese Cross or Star of Life applied to patch Leather Cuffs Yellow, Red, Royal Blue, Tan, Navy Blue, Black

ISO 9001:2008 CERTIFIED | ADSINC.COM

55

PERSONAL PROTECTION TURNOUT GEAR

A

B

ULTRAMOTION® STRUCTURAL GEAR COAT AND PANT

A

ULTRAMOTION is ergonomically engineered to meet the rigors of today’s firefighting professional. More complex fires and increased multidisciplinary tasks require protective clothing that adapts by offering full range of motion to all the areas of the body. It is not only a question of comfort, but one of saving precious seconds in the life and death situations that are part of the everyday world for firefighters.

• Tapered Athletic Stance Design • Oversize knee reinforcements • Sidewinder Coat Pockets (graded size) • Steam-blocker – knee, elbow & shoulder (patent pending) • SteamGard™ wrist trim • Ergonomic Arm & Leg • Uninterrupted Zip-in liner system.

• Lo-Rise Front/Hi-rise Back Pant • KEVLAR® reinforced pockets • Full Bellow Pant Pocket (10” x 10”).

• Side adjustment pull-tabs – tough & durable • Single action T-Closer® (patented) NOMEX® webbing • In-Collar Drag Rescue Device (patent pending) • Neoprene-lined, anti-wicking pant bottoms • Available quick-release suspenders • Choice of knee & cuff reinforcements • Standard coat & pant closure systems • Bar-tack reinforced stress points.

• All paired with hook & loop • Zipper under flap, hooks & dees.

• Integrated collar & storm flap T-Closer® (patented) Contact ADS for Ordering Information

B

ULTRAMOTION® PROXIMITY

Military Applications • Airports • Petrochemicals Fabric Combinations • Outer shells - Aluminized KEVLAR®, Aluminized PBI/KEVLAR® • Moisture Barriers - RT7100TM by W.L.Gore, CROSSTECH / Nomex PJC • Thermal Liners - XTRA-lite, XLT-Lite, Caldura Silver NP, Aralite NP, Ultraflex® Coat Features • In-Collar DRD, Integrated & Easily Accessible • Integrated collar & storm flap T-Closer™ (patented).

Eliminates the gap found in so many other throat strap & collar designs.

• Unique Ergonomic Shoulder & Underarm Design Increases venting, Eliminates the gusset for less bunching under the arm, increasing comfort, Minimizes coat rise.

• Sidewinder coat pockets™ (graded size) (patent pending). Many other pocket types available as options – all sewn below the waist to avoid overlap with SCBA straps.

• Bar-tack reinforced stress points for enhanced durability.

C

Pant Features • V-Blade Rescue Knife Pocket, A customized pocket specifically designed for a V-Blade Rescue Knife • Lo-rise front/Hi-rise back pant maximizes mobility & flexibility • Side adjustment pull-tabs in tough & durable NOMEX® webbing • Waist adjustment of 4” to 6” provides a better, tailored fit • Ergonomic leg 2 front panels divided at the knee.

The lower front panel is convex at the knee for better mobility & fit in all positions.

• Neoprene-lined, anti-wicking pant bottoms.

Protect against water wicking up.

Contact ADS for Ordering Information

C

RED MOBILE SINGLE SIDED

• Steel construction with durable red powder coat.

• Units are supplied with four swivel caster two with foot operated brakes and two adjustable helmet/boot shelves per compartment. Hanging pole is provided under top helmet shelf.

• All accessories such as hanger, helmet holders, glove dry hangers & personal property boxes can be purchased separately.

• Made in USA

NOW Made in the USA

56

800.948.9433

Size

Item Number

64”L x 20”D x 79”T

RMSS-3-20

76”L x 20”D x 79”T

RMSS-3-24

PERSONAL PROTECTION

D

EMS AND FIRE-RESCUE COAT

Model

Item Num.

7.0 oz. Advance Navy Blue/6.0 oz. Nomex Yellow

WBCIANB

7.0 oz. Advance Navy Blue/7.0 oz. Advance Yellow

WBCIAAB

6.8 oz. Nomex Navy Blue/6.0 oz. Nomex Yellow

WBCINNB

D

TURNOUT GEAR

• Full cut design available in Advance™, Nomex® IIIA, and Indura® Ultra Soft fabrics • Full zippered front closure with #10 brass zipper mounted on Nomex® tape • Caped shoulder design with built in ease for full freedom of arm movement • Gusset cuff with hook and loop closure • Alpine style collar • Radio pocket with mic tab • Unidirectional front cargo pockets with concealed hand warmers • Large interior storage pocket and glove hanger tab • Hi-viz style 3M triple trim around bottom, chest and upper/lower arms standard • Sewn with Nomex® thread throughout • NFPA 1977-05’ edition Approved - UL Certified

9.0 oz. Indura Ultra Soft Blue/9.oz. Indura Ultra Soft Yellow WBCICCB 6.8 oz. Nomex Navy blue (Entire Coat)

WBCI60NB

9.0 oz. Indura Ultra Soft Navy Blue (Entire Coat)

WBCI95NB

7.0 oz. Advance Navy Blue (Entire Coat)

WBCIA7NB

Interface Coat Options

Item Number

BUTTON-IN INDURA®

FLI ULTRA SOFT® LINER RED

E

E

INTERFACE™ COAT

• Full cut design available in Nomex® IIIA or Indura® Ultra Soft® fabrics • Full zippered front closure with #10 brass zipper mounted on Nomex® tape • Caped shoulder design with built in ease for full freedom of arm movement • Gusset cuff with hook and loop closure • Alpine style collar • Radio pocket with mic tab • Unidirectional front cargo pockets with concealed hand warmers • Large interior storage pocket and glove hanger tab • 3M triple trim around bottom, across back & around forearms • Sewn with Nomex® thread throughout • NFPA 1977-05’ edition Approved - UL Certified • Color: Yellow Model

Item Number

9.0 oz. INDURA® ULTRA SOFT®

WBCI95Y

6.0 oz. NOMEX® IIIA

WBCI60Y

7.5 oz. NOMEX® IIIA

WBCI75Y

Advance Fabric Yellow

WBCIA7Y

Interface Coat Options

Item Number

BUTTON-IN INDURA®

FLI ULTRA SOFT® LINER RED

BUTTON-IN INDURA®

FLINB ULTRA SOFT® LINER NAVY BLUE

F

• • • • • • • • • • •

F

CREW BOSS™ BRUSH SHIRT Two large breast pockets with hook and loop closures Full cut shoulder and body design Hook and loop cuff closure insures tight fit at the glove Extra long square cut tails Unique 3” stand-up collar with throat strap Stress points bar tacked at 10 locations Fabric-covered nickel plated snap front closure Nomex® thread throughout to insure the strongest seams Available in Nomex® IIIA or FR Indura®Ultra Soft® cotton NFPA 1977-05’ edition Approved - UL Certified Color: Yellow

Model

Item Number

9.0 oz. INDURA® ULTRA SOFT®

WBSC95Y

6.0 oz. NOMEX® IIIA

WBSC60Y

Brush Shirt Option

Item Number

Zippered Front Closure

ZP

ISO 9001:2008 CERTIFIED | ADSINC.COM

57

PERSONAL PROTECTION

A

B

TURNOUT GEAR

A

Model

Item Number

9.0 oz. INDURA® ULTRA SOFT®

WBPI95Y

6.0 oz. NOMEX® IIIA

WBPI60Y

7.5 oz. NOMEX® IIIA

WBPI75Y

B

ADVANCE™ BRUSH PANT

Constructed of 60% Kevlar®/40% Nomex® IIIA, Advance™ ripstop fabric is incredibly tough. Advance fabric offers superior durability, abrasion resistance and exceeds NFPA 1977 standards. Two ply yarns of Nomex® and Kevlar® are woven into Advance™ fabric providing exceptional cut and tear resistance, assuring a longer life for the garment. Advance™ provides a superior thermal barrier while remaining strong and flexible after extreme thermal exposure. All the same design features of the original Crew Boss pant.

• NFPA 1977-05’ edition Approved - UL Certified

C

C

32” NOMEX BUNKER COAT

Model

Item Number

32” Nomex Bunker Coat

ADSFDXNOMCTIX

REAR BIB-STYLE PANT

WBPCA7K

7.0 oz. ADVANCE Spruce

WBPCA7G

7.0 oz. ADVANCE Navy

WBPCA7NB

Options

Item Number

11” Zippered Leg Openings

ZP

2” SCOTCHLITE™ Silver

RTSILV

2” SCOTCHLITE™ Lime

RTLIM

2” SCOTCHLITE™ Triple Trim

RTTRIP

G

H

E

32” NOMEX/KEVLAR BUNKER COAT

Nomex/Kevlar FUSION outer shell with quilted batt thermal inner and Crosstech moister barrier. Modern coat with pleated back and elbow.

Thumb hole knit wrist and large pockets.

• Zipper/Velcro closure.

• Bronze color outer shell Model

Item Number

32” Nomex/Kevlar Bunker Coat

ADSFDXN/KCOGX

F

Three inch rear panel Nomex pant. Large pockets, padded knees, pleated knee and reverse tapper cuff.

• Colors: Yellow, Black, Red, Tan, White

REAR BIB-STYLE PANT

G

Item Number

Model

Item Number

Rear Bib-Style Pant

ADSFDXNOMPTIX

Rear Bib-Style Pant

ADSFDXN/KPTGX

32” ARFF COAT

Aluminized PBI outer shell with quilted batt thermal inner and Crosstech moister barrier. Modern coat with pleated back and elbow. Thumb hole knit wrist and large pockets.

• Zipper/Velcro closure.

Model

Item Number

32” ARFF Coat

ADSFDXALUMCT IX

H

Three inch rear panel Nomex/Kevlar FUSION pant. Large pockets, padded knees, pleated knee and reverse tapper cuff.

• Bronze outer shell

Model

800.948.9433

Item Number

7.0 oz. ADVANCE Khaki

F

Nomex outer shell with quilted batt thermal inner and Crosstech moister barrier. Modern coat with pleated back and elbow. Thumb hole knit wrist and larger pockets. Zipper/Velcro closure.

• Colors: Yellow, Black, Red, Tan, White

D

Model

E

D

58

INTERFACE™ PANT

• Full cut design available in Nomex® IIIA, Indura® Ultra Soft® & Advance™ fabrics • #5 Nomex® zippered fly with nickel snap closure • #5 Nomex® zippered side pass through pockets • Double-layered fabric knees • 2” elastic back band with seven large belt loops • Unidirectional cargo pockets at thighs prevent snagging • #10 Nomex® zippered leg openings for easy donning and doffing • Double back D-ring, hook & loop cuff closures for tight fit at the boot • 3M Scotchlite™ triple trim around calves • Sewn with Nomex® thread throughout • NFPA 1977-05’ edition Approved - UL Certified • Color: Yellow

ARFF PANT

Three inch rear panel Aluminized PBI pant. Large pockets, padded knees, pleated knee and reverse tapper cuff.

Model

Item Number

ARFF Pant

ADSFDXALUMPT IX

SCBA & RESPIRATORY

SCBA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 SCBA Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Compressors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Respiratory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

CATALOG PRODUCT LABELS Look for these symbols next to products in this catalog to quickly identify important ordering options or special characteristics.

Designated for the Army Rapid Fielding Initiative.

National Fire Protection Association Certified.

Products from this manufacturer are available from ADS through GSA. See these products on YouTube at: youtube.com/adstactical Look for these symbols and enter the adress to visit the manufacturers page on adsinc.com 59

SCBA & RESPIRATORY SCBA

Products from this manufacturer are available from ADS through GSA.

AIR-PAK® 75™ SCBA

Scott Air-Pak SCBAs go beyond the standards with innovative features, advanced technologies, and optional accessories not available on any other SCBAs, including Snapchange™ cylinder valve, cylinder engage/disengage lights, buddy indicator lights, a drag rescue loop (DRL), an angled mechanical gauge with constant-on backlighting, a simplified central power management system with a single battery module, and a streamlined backframe for improved hose management and user comfort.

• Berry Compliant • Made in USA Multiple configurations available. Contact ADS for ordering information.

A

A

MOBILE AIR CART

Mobile Air Cart supplies breathing air for several hours (by rotating cylinders) for up to 4 users at a time, at NFPA flow rates. Standard valved high pressure inlet with stainless steel quarter turn ball valve (includes standard CGA male threads and dust cap with lanyard).

• Berry Compliant • Made in USA

B

Multiple configurations available. Contact ADS for ordering information.

B

TRC -1 AIR CART

This compact & lightweight mobile air cart provides an uninterrupted supply of breathing air for up to eight users at a time. In fact, the TRC-1 Air Cart can supply two teams with air from different air sources that are independently alarmed with end-ofcylinder service indicators. One set of four outlets allows for a compressor or cascade system to be used as the air source while another set of four outlets allows SCBA style cylinders in 30-, 45- & 60-minutes to be used to supply air.

• Berry Compliant • Made in USA Multiple configurations available. Contact ADS for ordering information.

C

C

D

SWATPAK

D

Today’s law enforcement personnel are challenged with the potential for responding to all sorts of unknown respiratory hazards and clandestine lab operations. Scott Safety, the leader in firefighter respiratory protection, provides tactical teams with optimum respiratory protection against hazardous chemicals and biological agents. Dangerous situations demand the best protection available. Your mission, your courage and your dedication send you in. Scott Safety helps bring you out!

• Berry Compliant • Made in USA

60

Model

Item Number

SwatPak

805454

800.948.9433

SKA-PAK® AT SUPPLIED AIR RESPIRATOR

Combination supplied air respirator with automatic air transfer capability & Vibralert® alarm takes the panic out of entering or escaping HAZMAT, confined space or IDLH environments. If your primary air source becomes interrupted, the ingenious SKA-PAK AT respirator automatically transfers to cylinder air, while Scott’s legendary Vibralert alarm notifies you of the transfer and signals you to exit.

• Berry Compliant • Made in USA Multiple configurations available. Contact ADS for ordering information.

SCBA & RESPIRATORY

RIT-PAK III

SCBA

The Scott Safety RIT Pak III is the fire service industry’s first allinclusive portable air supply system and the most comprehensive RIT system available on the market. Developed with input from RIT instructors and firefighters from across the country, the RIT Pak III is field designed and tested. The system in comprised of a pressure reducer, high-pressure fill hose, low-pressure air supply hose and a lightweight carrying device. Unlike other RIT systems, the Scott RIT Pak III is a universal tool that works perfectly in mutual aid situations regardless of the SCBA used by other fire departments. Equipped with a protective skid plate, the RIT Pak system’s carrying case has two convenient storage pouches for easy access to rescue tools and rescue rope. A Hi-Viz orange material and reflective stripes on the case provide enhanced visibility. An external pressure gauge provides pressure indicator lights to mimic those used on the heads-up display on the Air-Pak SCBA. • Berry Compliant • Made in USA Multiple configurations available. Contact ADS for ordering information.

E

F

G

E

ST53

The ST53 combines Avon Protection Systems’ FM53 mask with innovative modular breathing apparatus technology to provide positive pressure SCBA and-or PAPR capability for specialist applications.

The ST53 system provides the operator with total flexibility to select the necessary level of protection quickly while continuing to operate effectively. The standard ST53 with full Frontier back frame is available with a selection of cylinders from 2216 PSI aluminum to 4500 PSI lightweight carbon options for 30, 45 and 60 minute durations.

• Cylinder Valves: Both versions include a nickel-plated brass cylinder valve. The ST53 is available in locking and non-locking configurations while the ST53SD is only available in non-locking configuration.

• Cylinder Content Monitoring: The ST53 backframe option includes a remotely accessible, chest mounted pressure gauge for monitoring of pressure and a whistle for end of service alarm (which has the option to be disabled if required).

• Compact Demand Valve (CDV): The compact chemically hardened demand valve provides constant positive pressure.

• Stealth Features: Designed with stealth applications in mind including non-reflective black components and a warning whistle which can be silenced.

• Communication: For enhanced voice amplification, an optional Voice Projection Unit (VPU) with internal microphone can be connected via the Electronic Communication Port (ECP).

Multiple configurations available.

Contact ADS for ordering information.

F

ST-PAPR

The ST-PAPR is available as an optional extra with the ST53 and ST53SD. This modular system easily attaches quick connect air line couplings and straps to locate the unit alongside the air cylinder.

The ST-PAPR provides additional levels of serviceability and comfort associated with powered air while retaining the ability to switch instantly to the positive pressure SCBA mode when required.

• The ST- PAPR has a remote on-off switch enabling the ST- PAPR to be easily switched on and off.

• Flow rate up to 115 lpm.

• Lithium Sulfur Dioxide battery option with a minimum 7hr battery life.

• Airline - decontamination attachments are available with the ST53.

• Operator replaceable spare parts available, easy to maintain with access to key components.

• User can ‘hot-swap’ battery if required without contamination (common batteries with the C420 PAPR) • Inline filter configuration designed to be low profile when strapped to the ST53 or ST53 SD system, it provides single connection to mask.

• With quick-connect for SCBA feature, ST53 or ST53 SD systems both attach to the unit to provide a single hose connection to the mask. Designed for specialist users (shooters) who need to use a single sided filter FM53 mask.

Multiple configurations available.

Contact ADS for ordering information.

G

ST53SD

Short duration variant ST53SD, provides a belt or harness carry option and a 10 minute duration air cylinder. Compatible with the STPAPR, the ST53SD meets the unique requirements of end users in shortduration tactical operations. The ST53SD provides the option of either a remote whistle and pressure gauge or a single pressure gauge attached directly to the regulator body.

With the ST-PAPR the integrated CDV enables the user to switch instantly from powered air to positive pressure SCBA mode when required. The CDV is attached to the mask via the standard 40mm thread connection.

Multiple configurations available.

Contact ADS for ordering information.

ISO 9001:2008 CERTIFIED | ADSINC.COM

61

A

B

C

SCBA

SCBA & RESPIRATORY

Products from this manufacturer are available from ADS through GSA.

adsinc.com msa

C

B

A

FIREHAWK RESCUE BELT

Applications: • Chemical • Electric Utility • Fire Fighting • Nuclear • Oil and Gas

Hazards: • Confined Space • Fire • Oxygen Deficiency • Toxic Atmosphere IDLH

Product Information: An emergency egress system designed to help firefighters rappel to safety, should they become trapped in an upper story of a building.

Comes complete with the appropriate repelling hardware and rescue line and meets the NFPA 1983-2006 edition standard on fire service life safety rope and system components. Designed for use as an integral part of any MSA MMR air mask (with M7, Vulcan™ or AirFrame carrier and harness), it is the only system that meets both the NIOSH CBRN and NFPA 1981-2007 edition SCBA standards. The complete system is capable of a 1,000 pound static load, exceeding the NFPA minimum requirement of 300 pounds. It is available in two waist sizes and two rescue line lengths. The rescue belt can be ordered as an option on new SCBA or an individually sold component for upgrading your existing MSA SCBA. Fits Waist Sizes

Item Number

36” - 54” (91 - 137 cm.)

10052766 / 10052938

36” - 74” (91 - 188 cm.)

10052767 / 10052939

36” - 54” (91 - 137 cm.)

10052768 / 10052940

36” - 74” (91 - 188 cm.)

10052769 / 10052941

Contact ADS For Support Line and BELT Replacement Kit Information

62

800.948.9433

FIREHAWK M7

Applications: Hazards: • Chemical • Confined Space • Clan Labs • Fire • Electric Utility • Oxygen Deficiency • Fire Fighting • Toxic Atmosphere IDLH • Nuclear • Oil and Gas Product Information: • MSA’s new FireHawk M7 Air Mask represents a true technological achievement in critical personal protection. As firefighters determined the safety requirements that would be needed to meet the new NFPA 1981 and 1982–2007-edition standards, MSA’s engineering teams began designing the solutions.

• The new FireHawk M7 Air Mask emerged with seven life-safety design components built on a modular Air Mask platform, developed to exceed the new NFPA 2007 requirements and provide firefighters with the highest-quality SCBA currently available.

Specifications: • Weight with empty H-30 cylinder (including batteries) is 20 lbs-8 oz • Battery life of electronics > 1 year with frequent use (standard alkaline cells) • RFI shielding up to 50v/m radio signal load across an 80 MHz to 2.5 GHz range • PASS heat alarm performance > 95 dB @ 500°F • Water immersion protection – M7 electronics at 5 ft. depth for 1 hr • Air delivery – manufactured to the NFPA standard 320 lpm rate; design qualified at twice NFPA rate (640 lpm) cyclic breathing • Data-logging – most recent 25-hours-of-use information • Electronic ID tagging (RFID) standard with M7 Accountability System • Optional equipment: Rescue Belt repelling system (50 ft. & 75 ft.), MSA Accountability System, Extend-Aire and Quick-Fill emergency breathing systems, Push-to-connect or Slide-to-connect regulator attachments, swiveling lumbar pad and chest-strap.

• Standard equipment includes: Facepiece cross-contamination check-valve, thermal alarm, time-remaining display, wireless programming and network, front & rear buddy lights, auto-dim HUD, large drag-carrying handles, stainless steel cylinder band with cam-lock system.

Fits Waist Sizes

Item Number

FireHawk M7 Air Mask, high-pressure, swiveling lumbar pad, 45-min. low-proA-M7H-D13COC12AA0 file carbon cylinder, medium facepiece, control module with heat sensor FireHawk M7 Air Mask, high-pressure, swiveling lumbar pad, 60-minute carbon cylinder, medium facepiece, A-M7H-D14C0C12AC0 telemetry, control module with accountability system and heat sensor

FIREHAWK M7 RESPONDER

Applications: Hazards: • Chemical • Confined Space • Clan Labs • Fire • Electric Utility • Oxygen Deficiency • Fire Fighting • Toxic Atmosphere IDLH • Nuclear • Oil and Gas Product Information: • MSA’s new FireHawk M7 Responder Air Mask is uniquely versatile protection that can quickly be transformed into a CBRN air-purifying respirator (APR) or a CBRN powered air-purifying respirator (PAPR). You can change respirator modes as your job changes direction from first response and rescue to scene management and remediation activities.

• Firefighters typically are the first to respond to any incident whether it is a residential fire, an accident, or any unknown threat. MSA’s FireHawk M7 Responder Air Mask provides the maximum level of protection for CBRN environments. However, that amount of protection is not always needed, especially outside the immediate fire scene. Once the hazard has been assessed, air-purifying respirators (APR) may make the most sense for low concentrations of certain contaminants.

• The M7 Responder facepiece is NIOSH approved for the SCBA, PAPR and APR configurations, in accordance with the MSA users instructions. This practical emergency respiratory protection system meets/ exceeds the latest requirements of NFPA and NIOSH standards (see ATO ordering information for details). It’s the first and only of its kind, and an emergency responder’s dream come true.

Fits Waist Sizes

Item Number

FireHawk M7 Responder Air Mask, high-pressure, swiveling lumbar pad, 45-min. low-profile carbon cylinder, A-M7RH-D130C12ABA0 medium facepiece, control module with heat sensor FireHawk M7 Responder Air Mask, high-pressure,swiveling lumbar pad, 60-minute carbon cylinder, A-M7RH-D140C12ABC0 medium facepiece, control module with accountability system telemetry and heat sensor MSA proudly provides the United States Air Force Fire Departments with a unique Air Mask that is designed to be easily convertible among CBRN SCBA, CBRN APR, and CBRN PAPR respirator configurations. The FireHawk® M7 Responder Air Mask is a derivative of this Air Mask and is now available to customers that wish to utilize this extremely versatile respiratory protection system. To order the FireHawk® M7 Responder Air Mask as similar to the U.S. Air Force Air Mask as possible, the following part numbers are required.

Model

Item Number

Small Facepiece

A-M7R-H-D-1-4-0-B-1-2-D-B-C-1

Medium Facepiece

A-M7R-H-D-1-4-0-C-1-2-D-B-C-1

Large Facepiece

A-M7R-H-D-1-4-0-D-2-2-D-B-C-1

PSS7000

The new Draeger PSS 7000 self-contained breathing apparatus (SCBA) has received NFPA 1981 and 1982, 2007 approvals. The device is approved to meet and exceed NFPA’s new standard for water submersion, tumble test, heat and cold testing. It achieves the highest requirements in the market.

SCBA

The Draeger PSS 7000 offers diverse features for successful fire fighting.

• The monitoring system - Sentinel The Draeger PSS 7000 features a smart fully integrated electronic fire fighter monitoring system. The electronic monitoring system called Sentinel 7000, which is approved to the 1982, 2007 standard, includes a PASS device providing both audible and visual alarms to the fire fighter. It displays and records all vital information from the PASS device as well as from the SCBA providing real time information regarding air supply and consumption.

SCBA & RESPIRATORY

adsinc.com draeger-safety

• New communication system including the TST The new communication system fits into the Draeger FPS 7000 mask which sets new industry standards for face fit and comfort. It comes in three distinctive sizes to perfectly fit the contour of the face and provides excellent sealing between the mask and face. It also has a fully integrated voice amplifier and radio interface system. The twin speakers provide exceptional voice clarity with a surround sound output. The Draeger FPS communication system has an extremely low profile as it was designed and built to fit into the actual face mask. For the first time Draeger introduces the TST technology to the industry (Titanium Sound Technology). This new technology which has a resistance to high temperature environments is incorporated into the Draeger PASS alarm sounders providing a loud 95 dba plus warning output to alert other fire fighters in the area.

• Tailor made solutions for fire fighters The flexible carrying system with integrated handles, internal hose guides, and a patented swivel waist belt optimizes the overall weight and balance providing a lower center of gravity than traditional SCBAs, setting a new standard for freedom of movement. A large number of firefighters through out North America were surveyed to ensure every aspect of this SCBA was covered and designed to meet the requirements. The Draeger PSS 7000 uses the latest technology and materials, to ensure long and enduring reliability. This means that the Draeger PSS 7000 is a dependable partner, even under extreme conditions. The innovative features like “on demand” Heads-Up Display system provide firefighters the ability to see air pressure levels in the environment no matter how thick the smoke.

• New Designs and Materials Draeger’s new harness suspension system uses vocalized rubber outer layer covering a closed cell inner core. This new structure provides excellent harness stability and wear resistance to the fire fighters when wearing the SCBA. It ensures that the apparatus fits perfectly to the torso of the fire fighter. All hoses are integrated into the back plate protecting them from snagging and the environment. The newly designed backplate made of carbon composite material is designed to meet the tough conditions of the fire industry. Large handles on the backplate enable the firefighter to hold on to a team member or drag them to safety. The fully adjustable backplate design offers the most freedom of movement and best fit of any SCBA. The Draeger PSS 7000 is ergonomically designed, easy to use, decontaminate, and maintain. The Draeger PSS 7000 has been designed to expand with future telemetry and additional communications systems to be introduced by Draeger in the near future.

Contact ADS for Ordering Information

D

D

D

SCBA-G

• Combination and Modular APR/ PAPR/ SCBA System with one fit test and one mask issuance.

• The SCBA-G is a modular combination SCBA/PAPR designed to provide long-duration breathing protection to Emergency Responders and the Military, Utilizing proven, tested technology, the SCBA-G is ideal for missions requiring long entry/egress or, involve unknown elements that may require, more or less protection. Without exposure to the environment, the user chooses the level of protection — compressed or filtered air.

• Paired with Drager’s Brand New Hybrid mask you have the ability with these components to have an APR, PAPR, SCBA, or a Combination PAPR/SCBA Unit with only one fit test and the issuance of one mask.

• Some Draeger SCBA’s already in the field have the capability of being upgraded with just the SCBA-G Upgrade kit. With all SCBA-G products the mask must be purchased separately.

Contact ADS For Ordering Information

ISO 9001:2008 CERTIFIED | ADSINC.COM

63

SCBA & RESPIRATORY SCBA

A

A

B

SPERIAN® WARRIOR™

B

Sperian Fire recruited teams of experienced professional firefighters & first responders to help design the Warrior. These professionals were placed at the center of our design process. Based on their input, we developed an SCBA unlike any you have ever experienced; comfortable, reliable, & simple to use under the worst conditions.

• Sleek design. All functional components; first stage, central power source, PASS audible & visual alarms, low air & battery alarms are integrated into the Air-Pod™ backpack, eliminating dangerous catch points • Ergonomic backpack provides unmatched maneuverability & weight distribution, greatly reducing fatigue • Central power source consisting of 4 “C” batteries that power the Air-Pod backpack, visual alarms & HUD • Re-engineered PASS device with an analog gauge, battery status indicator, two PASS audible & visual alarms on the front & back of the unit, & a data logging function • Two robust communication options: Voice Amplification System with distortion free sound & wireless Radio Communication System with crystal clear voice transmission & sound • Best-in-class HUD options with standard LED HUD or optional Digital Dashboard™ LCD HUD that displays digital & analog pressure & air time remaining in minutes based on user’s work rate Audible Alarm

64

Products from this manufacturer are available from ADS through GSA.

adsinc.com sperian-protection

PSIG

Item Number

Audible Alarm

PSIG

POSICHEK3

The PosiChek3 is the only breathing machine that meets the stringent requirements specified by NFPA 1852. Firefighters can only work at peak performance when their equipment works the way it was designed to work. NFPA 1852 mandates that all compliant SCBA must be tested on a calibrated breathing machine before being put into service and at least once per year thereafter. The Enhanced Precision (EP) High Pressure Transducer has been standard issue with every new PosiChek3 sold since March, 2004.

The EP transducer was developed to keep pace with new test standards that are being adopted by the SCBA manufacturing community in an effort to improve user safety. The EP Transducer gives a more precise measurement of pressure within the high-pressure manifold during testing. At the same time the ‘Sound Detection System’ (SDS) was also introduced as an option. The SDS includes a microphone and all necessary hardware to eliminate human interaction during the primary audible alarm test.

Description

Item Number

Low & high pressure (2216 and 4500 psig) with middle stage transducer, 54-20-1117-32 including Enhanced Precision (EP) transducer & 32-bit Sperian PosiChek software.

Item Number

Sperian PosiChek3 (EP) with laptop computer package

54-20-1117-32-L 54-20-1117-32-D

Warbling Whistle

2216

22WW02

Plain Whistle

3000

30PW02

Sperian PosiChek3 (EP) with desktop computer package

Warbling Whistle

3000

30WW02

Plain Whistle

4500

45PW02

Warbling whistle

4500

45WW02

Bell

2216

22NB02

54-20-2117-32

Plain Whistle

2216

22PW02

Bell

3000

30NB02

Low and high pressure (2216 & 4500 psig) with middle stage transducer, including Enhanced Precision (EP) transducer, sound detection system (SDS) & 32-bit Sperian PosiChek software.

Sperian PosiChek3 (EP & SDS) with laptop computer package

54-20-2117-32-L

800.948.9433

C

D

D EPIC™ RI WIRELESS COMMUNICATIONS SYSTEM

The Protégé is a full-featured, ergonomically designed multi-gas monitor with a large easy-to-read backlit display. Its convenient two-button interface and automatic calibration feature make it easy to operate and easy to maintain. This compact personal instrument is ideal for the detection of oxygen, combustibles, hydrogen sulfide and carbon monoxide.

• Berry Compliant • Made in USA

Using wireless technology, this facepiece-mounted device provides remote communications that allow the unit to interface with a personal-issue radio through a communications console. It also offers high-quality voice amplification for effective person-to-person local communications, while a speaker, located near the user’s ear, ensures the reception of clear, understandable incoming remote messages.

• Berry Compliant • Made in USA

Multiple configurations available.

Contact ADS for ordering information.

E

EPIC™ VOICE AMPLIFIER

Robust person-to-person communication is possible with this facepiece-mounted amplifier - a small-profile, simple-to-use voice projection device that transmits strong, clear and crisp voice communication to other nearby respirator users. It easily mounts to Scott’s AV-2000® and AV-3000® facepieces.

• Berry Compliant • Made in USA

SCBA ACCESSORIES

C PROTÉGÉ™ MULTI - GAS PERSONAL GAS MONITOR

E

SCBA & RESPIRATORY

Products from this manufacturer are available from ADS through GSA.

Multiple configurations available.

Contact ADS for ordering information.

Multiple configurations available.

Contact ADS for ordering information.

FIRST RESPONDER TRAILER

THE ULTIMATE IN BREATHING AIR RESPONSE BREATHING AIR TRAILERS The Ultimate in Breathing Air Response Breathing air trailers with custom storage and air delivery for military readiness and emergency response for nuclear, chemical and biological applications.

Sustain 5 workers in pressure demand respirators and level A protective suits for eight hours using our DOT road ready bottled breathing air trailer. Respond to Hazmat, chemical and biological incidents using our First Responder Trailer and be assured of a secure, extended duration breathing air supply source. Personnel door in front of trailer exposes SCBA cylinder storage and personnel lockers for storage of suits and equipment.

• Trailers available in different sizes, call ADS for additional information.

ISO 9001:2008 CERTIFIED | ADSINC.COM

65

SCBA & RESPIRATORY

A

A MODULAR ALUMINUM SCBA CYLINDER STORAGE RACKS

SCBA ACCESSORIES

The Air-Kaddy’s™ unique modular design allows for expansion as needed to accommodate your SCBA storage requirements ...... today and in the future! Available in Free Standing, Series 40 and one Vehicle Style, Series 24. All racks are lined with nylon pads to prevent cylinder scratches.

Model: SERIES 24: 25.25”W X 22.25”D Item Number

Description

AK24-8

AIR-KADDY™ 8 cylinder rack - 32”H

AK24-11

AIR-KADDY™11 cylinder rack - 48”H

AK24-18

AIR-KADDY™18 cylinder rack - 60”H

AK24-24

AIR-KADDY™ 24 cylinder rack - 76”

Model: SERIES 40: 37.5”W X 22.5”D Item Number

Description

AK40-15

AIR-KADDY™15 cylinder rack - 36”H

AK40-25

AIR-KADDY™25 cylinder rack - 60”H

AK40-35

AIR-KADDY™35 cylinder rack - 68”H

AK40-40

AIR-KADDY™40 cylinder rack - 76”H

ACCESSORIES: Item Number

Description

VAL -TS

THREAD SAVER® - cylinder thread protector

D C

B

D

B

MULTI-PAK™ RESCUE AIR CART

The MULTI-PAK™ series of small bottled air carts has been designed with the user in mind. Ideal for confined space entry, HAZ-MAT, fire rescue, emergency response teams and water/sewage treatment facilities. Specifications: Low pressure alarm whistle, standard aluminum outlet manifold, in-line check valves, rear hose rack and fold-down handles. Available in 2400psi or 4500psi versions. Specify fittings Hansen or Schrader • Dimensions: 28” L x 16” W x 41” H Item Number

Description

MP4-R

Multi-Pak™ Rescue Cart with 4500psi, 1additional LP regulator and fitting added for operation of rescue tools or lift bags, and a 2-way cylinder selector valve

MP-4H

High Pressure Multi-Pak™, 4500psi, 2 bottle air cart supplied with 4-outlet manifold, high flow regulator

MP-2L

66

Multi-Pak™, 2400psi, 2 bottle air cart supplied with 2-outlet manifold

800.948.9433

C TECHNICAL RESCUE BOTTLED AIR CART

Designed to provide air for all the various respirators and unique rescue tools used by Technical Rescue Teams. Stainless steel cart and color designated control panel allow one side of panel for respirator breathing air and one side for any tool requirements. Two, one hour SCBA cylinders or high pressure truck cylinder air can be used to operate the air control panel.

Item Number

Description

AC-87

87cf Carbon Fiber Cylinder, 4500 psi rated 1 hour

AC-60

60cf Aluminum Cylinder 2400 psi rated – 30 min

CW-300

25 ft. (300’’) High Pressure Connect Whip

QFH-5

Quick Fill hose, 5ft.

MULTI-AIR COMMAND KIT

MACK3 system features four separately regulated air systems that provide a portable air distribution package for any pressure environment. One or two SCBA’s are attached to two separate regulated air outlet manifolds. Each manifold can be isolated with directional valve during rescue work. One regulator allows for 0-125 psi output and the other at 0-250 psi for operating “lift bags” or “shoring jacks” for trench rescue. A CGA-347 inlet is provided to receive air from truck mounted air cylinders for continuous operation. A third regulator can be set for low pressure (0-125 psi) to operate air tools and an optional regulator (0-5000 psi) is used for SCBA filling. Optional fill and breathing air coupling adapters are available. MACKNFPA Series are available designed specifically for Confined Space Rescue Teams.

Item Number Description MACK-1

4-outlet manifold, 5000psi regulator, 2 HP whips, 1 HP inlet port, LP alarm whistle

MACK-2

Same as MACK-1 with addition of high pressure fill regulator and 1 fill whip, optional 2nd fill whip available for installation

MACK-3

8 LP respirator/tool outlets (0-150psi), 4 medium pressure outlets 0-250psi, 4 HP inlet whips, 1 HP CGA-347 inlet and pressure cap, LP alarm whistle, optional fill regulator and hose

C-D/DV/NAVY SHIPBOARD SYSTEM PORTABLE BREATHING AIR DIVE COMPRESSOR

SCBA & RESPIRATORY

adsinc.com bauer-compressors

THREE STAGE, AIR COOLED HIGH PRESSURE CAPITANO COMPRESSOR COMPRESSORS

• YANMAR L60 AE-D 6.0 HP Air Cooled Diesel Engine with 3.7 Quart Fuel Tank.

• Advanced Engine Mounting with Integral Jack Screws for easier Drive Belt Adjustment • BAUER P1 Air Purification System to process 15,000 CF of air per cartridge at standard inlet conditions • Visual CO/Moisture Monitor • Pressure Maintaining Valve, Check Valve and Bleed Valve • Air Outlet, 1/4”, with Tee Installed • Inlet Air Filter with Ten-Foot Flexible Hose • Two Six Foot Fill Hoses, Each Hose Complete with Shut Off Valve, Pressure Gauge, Bleed Valve and CGA-347 Adapter • Stainless Steel Tubing, Tube Fittings and Fill Hose Fittings, High Pressure Instrument Pipe Fittings and Anodized Aluminum Fill Adapters • Separator Drain Hose Clamps provide Stronger Clamping Force • Oil Drain Hoses for the Compressor and Diesel Engine • Enhanced Fill Hose Retainer Attachment Points • Four-Point Mounted Casters - Steerable • Rugged Compressor Paint Finish provides Greater Corrosion Inhibition • Metal Interstage Relief Valve Tagging Contact ADS for Ordering Information

C-D/DV/NAVY/SS MARINIZED SHIPBOARD SYSTEM PORTABLE BREATHING AIR DIVE COMPRESSOR

THREE STAGE, AIR COOLED HIGH PRESSURE CAPITANO COMPRESSOR • • • • • • • • • • • • • • • • • • • • • •

Marinized YANMAR L60 AE-D 6.0 HP Air Cooled Diesel Engine with 3.7 Quart Fuel Tank.

Muffler and Throttle Bracket Nickel Plated for Corrosion Inhibition.

Advanced Engine Mounting with Integral Jack Screws for easier Drive Belt Adjustment BAUER P1 Air Purification System to process 15,000 CF of air per cartridge at standard inlet conditions Visual CO/Moisture Monitor Pressure Maintaining Valve, Check Valve and Bleed Valve Air Outlet, 1/4”, with Tee Installed Inlet Air Filter with Ten-Foot Flexible Hose Two Six Foot Fill Hoses, Each Hose Complete with Shut Off Valve, Pressure Gauge, Bleed Valve and CGA-347 Adapter Stainless Steel Tubing, Tube Fittings and Fill Hose Fittings, High Pressure Instrument Pipe Fittings and Anodized Aluminum Fill Adapters Stainless Steel Frame with Integral Skid Plate Stainless Steel Cover with Lifting Handles and Tie Down Points Rugged Stainless Steel Cover Latches Compressor and Cover Lifting Handles designed for Operator Comfort Separator Drain Hose Clamps provide Stronger Clamping Force Oil Drain Hoses for the Compressor and Diesel Engine Enhanced Fill Hose Retainer Attachment Points Four-Point Mounted Casters - are Stainless Steel, have Brakes and are Independently Steerable Rugged Compressor Paint Finish provides Greater Corrosion Inhibition Metal Interstage Relief Valve Tagging Dimensions: 52” L x 213/8” W x 29” H Dry Weight: 322 lbs. (without cover) 64 lbs. (cover) 386 lbs. (total weight)

Contact ADS for Ordering Information

ISO 9001:2008 CERTIFIED | ADSINC.COM

67

SCBA & RESPIRATORY

adsinc.com bauer-compressors

UNICUS III BREATHING AIR CYLINDER RECHARGING SYSTEM

COMPRESSORS

THE TOTAL SYSTEM FOR RECHARGING CYLINDERS

The BAUER UNICUS III Cylinder Recharging Station is the total system for recharging high and low pressure SCBA or SCUBA cylinders. The design combines a BAUER 5000 or 6000 PSIG four or five stage compressors driven by up to a 30 HP electric motor with discharge capacities from 10.0 to 26.4 SCFM charge rate*. Features include UL® Listed NEMA 4 Electrical Enclosure (an industry first), PLC Controller with Panel Mounted Keypad Display, Function Coded Fill Panel (all fill control controls are easily operated from the front in an Illuminated Function Coded Panel, angled and recessed to permit maximum visibility and easy access) and Powder Coat Finish which assures not only a rugged finish but also an aesthetically pleasing appearance.

• Based on charging an 80 cubic foot tank from 500 to 3000 PSIG Contact ADS for Ordering Information

TCOM-25H TRAILER MOUNTED BREATHING AIR COMPRESSOR SYSTEM CONTAINS COMPRESSOR, AIR PURIFICATION, ASME STORAGE AND TWO-POSITION CONTAINMENT FILL STATION At the heart of the BAUER TCOM-25H is a BAUER 25 SCFM charge rate five stage continuous duty 6000 PSI air cooled compressor. A heavy-duty frame manufactured by BAUER assures a sturdy foundation for all pressure bearing components and provides years of service for its intended duty rather than commercial units adapted for the fire service. The enclosure encompasses all system components which include Compressor, Air Purification, ASME storage and Two-Position Containment Fill Station. Standard features include a unique dual drive Contact ADS for Ordering Information

68

800.948.9433

system incorporating our exclusive belt tensioning system that renders periodic belt tensioning a thing of the past, powder coat paint for a hard durable finish, integral SCBA storage for up to 12-SCBA cylinders, four ASME air storage cylinders and a two-position containment fill station to name but a few of the many enhancements. A choice of option packages allow you to customize the system to meet your specific needs.

• Based on charging an 80 cubic foot tank from 500 to 3000 PSIG

Products from this manufacturer are available from ADS through GSA.

AV-2000®/AV-3000® FACEPIECE

A

Multiple configurations available.

Contact ADS for ordering information.

B

B

M120 CBRN FACEPIECE

A sleek, low-profile design and a wide full-face lens for increased field of vision allows users to have the ultimate in NIOSH CBRN approved protection when combined with Scott’s 40 mm canisters.

The facepiece affords rapid deployment, simple disinfection and decontamination, and easy maintenance.

• Berry Compliant • Made in USA

C

Multiple configurations available.

Contact ADS for ordering information.

C

RESPIRATORY

Key to the Scott family of products are the advanced AV-2000® and AV-3000® facepieces. They’re fully interchangeable with our full line of SCBA, air-supplied respirators and air-purifying respirators, as well as communications products. The AV-3000 facepiece leads the way by taking advantage of all the features found in the AV-2000 facepiece and combining them with improvements designed to provide better fit, added comfort and enhanced communications.

• Berry Compliant • Made in USA

SCBA & RESPIRATORY

A

M110 DUAL LENS FULL FACEPIECE

The Scott Safety’s M110 Dual Lens Facepiece is a lightweight, low profile facepiece that is ideal for police, security SWAT teams and military personnel for both CBRN and other air-purifying applications. The M110 facepiece offers APR protection in combat, riot control, or other tactical situations. The versatile Scott M110 facepiece with 40 mm thread is approved for NIOSH PAPR, NIOSH APR, and CBRN-APR applications.

• Berry Compliant • Made in USA Multiple configurations available.

Contact ADS for ordering information.

D

XCEL HALFMASK

Scott’s Xcel halfmask is designed to fit every worker and every situation. Available in four sizes, it is a perfect fit for almost everyone.

Molded from a soft, yet durable thermoplastic elastomeric (TPE) material, the Xcel halfmask just naturally fits better. A full range of twin 742 cartridges is available.

• Berry Compliant • Made in USA

E

D

Multiple configurations available.

Contact ADS for ordering information.

E PROFLOW 3 POWERED AIR-PURIFYING RESPIRATOR

This powered air-purifying respirator is specially designed for use in non-IDLH (Immediately Dangerous to Life and Health) environments that require respiratory protection for extended durations or during physical exertion, such as the extraction of victims and decontamination. It’s ready to use with Scott’s AV-2000® or AV-3000® facepieces.

• Berry Compliant • Made in USA Multiple configurations available.

Contact ADS for ordering information.

ISO 9001:2008 CERTIFIED | ADSINC.COM

69

SCBA & RESPIRATORY

FIRE ESCAPE HOOD

PROTECTS AGAINST FIRE-RELATED RISKS

RESPIRATORY

The iEvac® Fire Escape Hood is first to earn Certification to the new American Standard ANSI/ISEA110. iEvac® protects against fire-related risks including toxic gases, harmful particulates and life-threatening physical hazards. American certification involves rigorous independent testing against many challenges including carbon monoxide, smoke, hydrogen cyanide, sulfur dioxide, other gases, particulates, soot, radiant heat & environmental conditioning. One universal size can be put on in 30 seconds. Contains a HEPA filter, also protects against ammonia, chlorine, phosphine & more. Easy-to-breathe dual-cartridges, high visibility reflective strips, compact, lightweight, vacuum sealed in a foil bag for a long shelf life.

Protects against: • Toxic Gases: carbon monoxide, smoke, hydrogen cyanide, chlorine, ammonia, sulfur dioxide, hydrogen chloride, and more.

• Harmful Particulates: soot, fumes, aerosols, and others • Contains a HEPA filter that removes more than 99.996% of sub-micron particles such as anthrax, smallpox, and radioactive particles.

• Life-Threatening Physical Hazards: flammability, radiant heat, and molten drip Contact ADS for Ordering Information

70

800.948.9433

SCBA & RESPIRATORY

A

RBE-NM10 HOOD POWERED AIR PURIFYING RESPIRATOR (PAPR) SYSTEM

• RBE-NM10 Hood Powered Air Purifying Respirator (PAPR) System, with NiMH Battery • This system is for use by first responders, law enforcement, military and health care professionals needing protection from or responding to natural disasters or acts of terrorism. Includes a rechargeable NiMH battery.

• 3M™Turbo PAPR Unit 022-00-03R01, 3M™ Butyl Rubber Hood BE-10BR, 3M™ Breathing Tube RBE-BTH, 3M™ Decon Belt RBEBLT, 3M™ Cartridges RBE-57, 3M™ Battery Pack BP-15 (nickel metal hydride), 3M™ Airflow Indicator 520-01-21. This system does not include battery charger.

Item Number

RBE-NM10 Hood Powered Air Purifying Respirator (PAPR) System

RBE-NM10

B

RESPIRATORY

Model

A

FR-7800B FULL FACEPIECE

• This full facepiece respirator is approved to NIOSH Chemical Biological Radiological Nuclear (CBRN) requirements in conjunction with 3M™ Cartridge FR-15-CBRN. It offers many unique features designed to increase comfort and wear ability for the civilian responder.

• Sizes: Small, Medium, and Large Model

Item Number

Small

FR-7800B-S

Medium

FR-7800B-M

Large

FR-7800B-L

B C

C

FR-M40B FULL FACEPIECE

• Approved to NIOSH Chemical Biological Radiological Nuclear (CBRN) requirements in conjunction with the 3M™ Canister FR15-CBRN. This facepiece features an integral speaking diaphragm that improves voice amplification and clarity.

• Sizes: Small, Medium, and Large Model

Item Number

Small

FR-M40B-10

Medium

FR-M40B-20

Large

FR-M40B-30

3M™ PARTICULATE RESPIRATOR 9210, N95 D

Individually packaged and flat-folded for excellent portability. Three-panel design provides comfortable protection for a wide range of face sizes.

Model

Item Number

3M™ Particulate Respirator 9210

9210

D

E

3M™ PARTICULATE RESPIRATOR 9211, N95 E

Three-panel respirator is ideally suited for work settings that involve heat and humidity. Individual packaging and flat-fold design promote hygiene and portability.

Model

Item Number

3M™ Particulate Respirator 9211

9211

IMPORTANT: The 3M products in this catalogue must be used in accordance with OSHA regulations, and the user instructions, warnings, and limitations accompanying each product.

ISO 9001:2008 CERTIFIED | ADSINC.COM

71

SCBA & RESPIRATORY

A

B

RESPIRATORY

C

A

FM53

The Avon FM53 mask was developed to meet the unique requirements of specialist end-users in the field. The mask, based on the U.S. M50/JSGPM (Joint Services General Purpose Mask), provides maximum operational flexibility to counter multiple threat scenarios, including chemical, biological, nuclear and radiological (CBRN) agents, Toxic Industrial Chemicals (TICs), and Toxic Industrial Materials (TIMs).

• The Twinport mask is supplied with a Filter Mount Plug Tool (70501-161).

• Available in four sizes for customized protection to accommodate all operators.

• Removable outserts are available to provide additional ballistic protection, comfortable operation in sunlight, and blue light filtration for sharper sighting.

• Mask will integrate with NFPA Class 2 and 3 suits.

• Integrated voice communications capability with internal microphone for both radio and voice projection unit use. Additional electronic pass-through for external radio use.

The FM53 mask is NIOSH certified in the following configurations: • FM53 mask with CTF12 filter Certified under 42 CFR 84 • FM53 mask with CBRNF12B filter Certified under CBRN APR Standard cap1 Multiple configurations available.

Contact ADS for ordering information.

72

800.948.9433

B

C50

The Avon C50 Mask, a commercially available derivative of the Avon Protection JSGPM/M50 mask, has been developed to meet the respiratory protection needs of non-military operators in the law enforcement, corrections, first responder and specialist responder industries. Available in 3 sizes, the C50 features a panoramic flexible visor, Electronic Communication Port (ECP and high-flow fail-safe hydration device.

• The C50 is NIOSH CBRN Cap 1 approved with the CBRNF12B filter and NIOSH 42 CFR 84 riot control CS-CN-P100 approved with the CTF12 filter.

• The C50 meets the latest NATO military standards.

• The filter side can be changed using Filter Mount Plug Tool (70501-161) - Conversion to be performed by trained mask technician only.

• The C50 is supplied complete with black bag and user instructions.

Multiple configurations available.

Contact ADS for ordering information.

C

NH15

The NH15 Escape Emergency Hood is designed specifically for users in an emergency incident. The world’s smallest NIOSH CBRN escape device is rated for 15 minutes and is available regular and extra small sizes. Does not require maintenance or fit testing and is designed for 5 years shelf life. Supplied in a black carrier that can be belt or shoulder mounted.

The Avon NH15 CBRN Escape hood is available in additional sizes to accommodate hard-to-fit users. A training hood, designed for demonstration purposes only, is available for use in training teams, staff and large groups on the proper use, donning and doffing of the NH15 hood.

Multiple configurations available.

Contact ADS for ordering information.

TOOLS & INSTRUMENTS

Breaching Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Extraction Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 MRO Power Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 MRO Power Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 MRO Vehicle Lifts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Rescue Hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Thermal Imaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

CATALOG PRODUCT LABELS Look for these symbols next to products in this catalog to quickly identify important ordering options or special characteristics.

Designated for the Army Rapid Fielding Initiative.

National Fire Protection Association Certified.

Products from this manufacturer are available from ADS through GSA. See these products on YouTube at: youtube.com/adstactical Look for these symbols and enter the adress to visit the manufacturers page on adsinc.com 73

TOOLS & INSTRUMENTS

Products from this manufacturer are available from ADS through GSA.

BREACHING TOOLS

adsinc.com broco

CUTTING RODS AND RAPIDFIRE CUTTING ROD IGNITERS THERMAL BREACHING KIT

Totally portable, extremely powerful cutting torch systems have the capability of cutting thick steel, aluminum, cast iron and more. Broco tactical torches are in service with military and civilian fire, rescue, law enforcement and Special Operations teams the world over. Broco tactical torches are fast, safe and easy to use. Consumable alloy cutting rods utilize oxygen as the only gas to burn at twice the temperature of oxy-acetylene. These lightweight systems are engineered to provide the greatest cutting capability in man portable systems. Breaching/Entry torch kit contains MOLLE backpack system, aluminum cylinder, regulator, torch, hoses & cables with quick-connects, battery ignition accessories, rod extender, gloves, safety glasses, accessories, case.

Model

Item Number

Cutting Rods And Rapidfire Cutting Rod Igniters

PC/TACMOD1

C

A

B C

RAPIDFIRE CUTTING ROD IGNITERS

RapidFire® Cutting Rod Ignition Cartridges fuel element reacts with oxygen to produce a preheat source facilitating near-instantaneous non-electric ignition of the Prime Cut cutting rods. Box contains 10 units. RapidFire® igniters are one-time use. *NOTE- PC/RFC-10 RapidFire® igniters ship as hazardous material. Contact Broco for current shipping information / instructions.

A

74

ENFORCER DOOR RAM

B

BABY ENFORCER DOOR RAM

Model

Item Number

Europe’s most popular one-man ram, Enforcer weighs 35 lbs.

Ergonomic, mass forward design, front hand guard, flat-side impact surface to clear jambs, unique design that impacts at over 3.5 tons. Most residential doors, even reinforced, will submit within 1-2 seconds. Enforcer has been able to open doors fitted with up to 7 different locks, bolts and chains with a single blow, proving why it has sold thousands the world over.

Designed for where space and weight are at a premium, Baby comes with all the proven features of the Enforcer ram. Only 16” long and weighing in at 23 lbs this ‘petite’ tool packs a punch that will surprise.

Baby’s compact size makes it easy to stow and carry but the high mass means it is effective under difficult conditions where other tools are just impossible to use.

RapidFire Cutting Rod Igniters

PC/RFC-10

Cutting Rods

Item number

3/8” x 18” Rods,25 lb.box,(68 rods/box)

3818/PC-25

3/8” x 36” Rods,25 lb.box,(33 rods/box)

3836/PC-25

Model

Item Number

3/8” x 60” Rods,25 piece bundle

3860PC-25

Model

Item Number

Baby Enforcer Door Ram

BRO-RAM-BABY

1/4” x 18” Rods,25 lb. box (137 rods/box)

1418/PC-25

Enforcer Door Ram

BRO-RAM-ENF

1/4” x 36” Rods, 50 piece box

1436/PC-50

800.948.9433

TOOLS & INSTRUMENTS

D

MINI-TAC EXOTHERMIC BREACHING TORCH SET (THERMAL BREACHING) D

Originating with Army Special Forces and the FBI, Mini-TAC has Broco’s awesome exothermic power in the most compact package.

MINI-TAC contains two composite oxygen cylinders, regulator, torch, hose with quick-connects, lightweight battery system, dual pole striker plate assembly, MOLLE cylinder pouch, rod extender, cutting rods, extender/cutting rod holders, safety accessories, case.

Item Number

MINI-TAC Exothermic Breaching Torch Set (Thermal Breaching)

PC/MTMOD1

BREACHING TOOLS

Model

E RESCUE/RECOVERY PORTABLE EXOTHERMIC TORCH SET

Recovery & Rescue torch meets the requirements of USAR teams for both confined space and extended cutting operations. Torch is setup with 5’ hose and cable for backpacked use. Included in the kit is the 25’ heavy rescue extension set. Attach the quick connect battery clamps to utilize a standard auto type 12 volt battery, bring up a shop sized oxygen cylinder and it is ready to do a lot of heavy cutting.

This kit was configured for the Marines for their heavy recovery applications onboard the M88A2 Hercules vehicles. A NATO Slave plug is available to operate the PC/A-5V2HR directly from a military vehicle’s battery system. Includes MOLLE backpack system, oxygen cylinder, regulator, lightweight battery, safety accessories, and case.

Model

E

Item Number

Rescue/Recovery Portable Exothermic Torch Set PC/A-5V2HR

F MOLLE PLATFORM BACKPACK SYSTEM FOR BROCO TORCH

New backpack for Broco torch sets allows the operator to carry just the Broco torch, Broco torch and extra oxygen cylinder, Broco torch and other breaching tools, Broco torch and an SCBA cylinder… Comfortable, configurable, fully modular, MOLLE intensive, the A.R.C. System™ pack can be adapted to full size torch and SCBA, mini-torch and full-size SCBA, mini-torch and mini-breathing, or…Options, answers, solutions for the Warrior. Backpack set ships with one large cylinder carrier.

Additional cylinder carriers (large and small) are available.

Model

Item Number

MOLLE Platform Backpack System for Broco Torch

PC/ARC-BP-BK

F

G

DIAMOND RIPPER™ DIAMOND RESCUE BLADE G

The Diamond Ripper’s™ double layer diamond cutting edge is thin like a metal cutting blade to yield cut times that are near equal to those of fragile, quick- wearing abrasive disks. Yet the aggressive texture allows it to shred other media including concrete and wood that are typically cut with heavy carbide tipped blades. The nickel alloy matrix securing the diamonds resists erosion far longer than traditional welded steel of old-school carbide blades. With all these industry leading features Broco’s Diamond Ripper™ rescue blade is still one of the most affordable on the market making it the best value for your money.

Model

Item Number

Diamond Ripper™ Rescue Blade

BRO-DRS-14

Mini Ripper High Speed Diamond Blade

BRO-DRS-4.5

ISO 9001:2008 CERTIFIED | ADSINC.COM

75

TOOLS & INSTRUMENTS

Products from this manufacturer are available from ADS through GSA.

adsinc.com broco

BROCO DOOR BLOWER

HYDRAULIC / PNEUMATIC DOOR OPENER

BREACHING TOOLS

The Blower hydraulic / Pneumatic door opener packs the power of explosives without the liability. Over 10 tons of force to implode the door or frame. Virtually silent until the door/lock breaks. Hydraulic jamb spreader supports the steel reinforced high pressure bag. Compressed air from a small cylinder powers the dynamic component. Broco Blower system includes: welded steel Blower hydraulic frame, bag, hydraulic pump, compact compressed air cylinder, regulator, hoses and accessories.

• Compliance (ECCN): EAR99 • Berry Compliant

RHINO SECURITY SCREEN DOOR PULLER

ONE MAN SECURITY SCREEN DOOR PULLER Large point penetrates screen, hooks behind locks plate. Slide action breaks doors / locks / jambs. Designed by a SWAT breacher, the Rhino works! Spike, Twist, Pull hard! All steel welded construction, 40” long, weighs 40 lbs.

• Compliance (ECCN): EAR99 • Berry Compliant

76

Model

Item Number

Rhino Security Screen Door Puller

BRO-RHINO

800.948.9433

Model

Item Number

Broco Door Blower

BRO-BLOWER

TOOLS & INSTRUMENTS

CF-3 HYDRAULIC SPREADER HYDRAULIC SPREADER

Model

Item Number

CF-3 Hydraulic Spreader

BRO-CF3-SPREAD

BREACHING TOOLS

The CF3- (Crow’s Foot) hydraulic spreader assists in opening all types inward and outward opening doors. Ideal for distorting/destroying security gates and window bars. Machined from hardened billet steel, the CF-3 has unbelievable strength and maximum reliability making it tougher than forged competitors. The unique 90° hose swivel enables it to be easily utilized in all positions. Spreader ram has 5 inches of travel. Can deliver up to 5 tons hydraulic power.

Lightweight aluminum hydraulic pump body.

• Compliance (ECCN): EAR99

‘SAS’ DOOR BREAKER THE ULTIMATE HIGH-TECH DOOR BREACHING DEVICE

Developed in England, the ‘SAS Tool’ is an electric / hydraulic jamb spreader and door opener.

Exerts almost 7 tons of force automatically switching between spreading and breaking. Can be used on either lock side or hinge side. Operates silently until lock breaks.The SAS-Breaker operates by exerting hydraulic pressure through the frame cylinder between opposing faces of a door jamb in order to provide necessary support and resistance for pressure to be applied through the door piston to force the door open. A hydraulic diverter valve within the tool automatically ensures the unit reaches correct pressure to hold it firmly before the door cylinder begins to pressurize.

• Compliance (ECCN): EAR99 Model

Item Number

‘SAS’ Door Breaker

BRO-SAS-BREAKER

ISO 9001:2008 CERTIFIED | ADSINC.COM

77

TOOLS & INSTRUMENTS BREACHING TOOLS

See these products on YouTube at:

adsinc.com husqvarna

youtube.com/adstactical

A

A

B

K960 RESCUE SAW

B

The new Husqvarna K 960 is our latest and most powerful handheld power cutter, featuring the revolutionary DualCharge™ engine technology. This unique machine is in a class of its own when it comes to emission levels, efficiency and maneuverability.

• The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed transmission. This keeps out cutting dust, reducing wear on the belt.

• Sealed transmission reduces the wear and slippage risk.

• Easy-adjust blade guard.

• Replaceable arbor bushing.

• Several models are equipped with a Poly-V belt, for better transmission of power, extended product life and service intervals.

• Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods. The distance between the handles is large to enable the user a comfortable operating position and to reduce strain. The handles and the short engine body mean the user always stands close to the machine, for easier handling and control.

• Poly-V belt for better transmission of power, less frequent re-tensioning and considerably longer product life.

• With the new cast aluminium ground support, featuring replaceable rubber pads, the K 960 is especially stable when placed on the ground.

• The newly developed front handle is larger, with a more comfortable grip.

Model

Item Number

K960 Rescue Saw

968479401

K750 CUT OFF SAW

Husqvarna’s K 750 belongs to the new generation of power cutters – developed from the ground up, inside and out. Our unique DualCharge™ engine technology, brings you a highly powerful 3.7 kW engine with low emissions and good fuel economy. It’s simply a cleaner, more efficient engine. The K 750 is also equipped with a large, effective muffler which decreases noise levels by 25%. The vibration dampening system increases operator comfort and reduces handle vibrations.

• The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed transmission. This keeps out cutting dust, reducing wear on the belt.

• Sealed transmission reduces the wear and slippage risk.

• Fuel indicator on the tank shows fuel level, to help avoid unnecessary stopping.

• Easy-adjust blade guard.

• Replaceable arbor bushing.

• Several models are equipped with a Poly-V belt, for better transmission of power, extended product life and service intervals.

• Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods. The distance between the handles is large to enable the user a comfortable operating position and to reduce strain. The handles and the short engine body mean the user always stands close to the machine, for easier handling and control.

• Large muffler reduces noise levels by 25%.

• Integrated holder for T-wrench is isolated near the water connection.

Model

Item Number

K750 Cut Off Saw - 12 inch Blade Diameter

965141901

K750 Cut Off Saw - 14 inch Blade Diameter

965142201

C

D

C

78

K950 RING SAW

The Husqvarna K950 Ring is the world’s first gas-powered power cutter to be able to make 10” deep cuts with a 14” blade. We have quite simply combined our unique – and patented – Ringsaw technology, where the blade is driven from the rim of the blade instead of its center, with the strong, easy to handle gas-powered cutter, the Husqvarna K950. With the K950 Ring, you get the best of both world: the tried and tested Ringsaw technology with its incredible cutting depth, and the ease of use and versatility of a gaspowered cutter. (Blade sold separately) • Twice the cutting depth of traditional power cutters.

• Active Air Filtration™ increases life of filters by 3-5 times.

• SmartCarb™ ensures high power is retained.

• EasyStart provides 50% easier starts.

• DuraStarter™ reduces wear on the starter.

• Folding blade guard and splash guard facilitate cutting close to ceiling and floors.

• Easy adjustment of blade and rollers.

• Easy cleaning simplifies service and maintenance.

The Husqvarna K950 Chain is a gas-powered saw with a diamond chain. It is based on the popular K950 power cutter and includes all of its technical and ergonomic advantages. With a concrete chain saw, you get better access in tight situations, better control and avoid gyro forces which allows for sharp corners with over-cutting. Make up to 15” (390mm) deep cuts from one side. Used in combination with a traditional power cutter to make the initial cuts, provides the fastest and most economical technique for deep cutting.

(Chain sold separately) • Makes 15” (390mm) deep cuts from one side.

• Large spary guard.

• Specially designed hand protection.

• Active Air Filtration™ increases life of filters by 3-5 times.

• SmartCab™ ensure high power is retained.

Model

Item Number

Model

Item Number

K950 Ring Saw

968307101

K950 Chain Saw

968308101

800.948.9433

D

K950 CHAIN SAW

EH5 BLADE

F

EH5 Blade is for general purpose cutting of concrete, masonry & stone.

• Abrasive material • Cured concrete • Asphalt, Brick • Green concrete • Concrete • Masonry, Stone Model

Item Number

12” x .125” - EH5 Series - 4” cut depth

542775594

14” x .125” - EH5 Series - 4” cut depth

542778735

16” x .140” - EH5 Series - 6” cut depth

542775595

G

NXS BLADE

SLC 45 DIAMOND CHAIN

G

The NXS diamond blade is designed to cut metal but can also cut concrete, asphalt, rebar and brick/block. The NXS incorporates a thicker core with cooling holes and an extremely fast segment with a .200” diamond depth.

• 14” (356) x .125 x 1 DP • 20mm B Diamond Blade (NXS Metal Cutting)

SLC 45 is used for lightly reinforced concrete, concrete pipes and other precast concrete at an economical price. O-ring design seals the rivot-joints of the chain providing long life.

• Fast cutting with depths to 15”; 32 segments/64 drive links • Total Segment height: .200” diamond depth Model

Item Number

Model

Item Number

SLC 45 Diamond Chain

531101184

NXS Blade - 12”

542776549

NXS Blade - 14”

542776454

BREACHING TOOLS

E

F

TOOLS & INSTRUMENTS

E

H

I

H

MINI TORCH ASSEMBLY

I

Exothermic Cutting Torch Assembly utilizes oxygen as a fuel source to perform utility cutting. These torch systems provides an expedient alternative when other methods of breaching are inappropriate for technical or tactical reasons. This system features a distinct advantage over competitor products in that they are very light weight, low profile, and scalable to meet a variety of mission requirements.

Kits Include: • Exothermic Cutting Torch Assembly • Flame Resistant Hood • Welding Glasses • Welding Gloves • Cape Sleeves

• • • •

HELLBOY EXOTHERMIC CUTTING TORCH HANDLE

Cutting Torch Handle for the Wilcox Mini Exothermic Cutting Torch and Patriot Exothermic Cutting Torch Module. Accommodates ¼” to 3/8” rods without the needing to change out the collet.

Model

Item Number

HellBoy Exothermic Cutting Torch Handle

54001G03

Striker Charging Whip 12 1/4” Fuel Rods 12 3/8” Fuel Rods in a Pelican Case.

Model

Item Number

Mini Torch Kit - CGA 95Ci Bottle

40400G09

Mini Torch Kit - CGA 56Ci Bottle

40400G11

Mini Torch Assembly - CGA 95Ci Bottle

40400G03

Mini Torch Assembly - CGA 56Ci Bottle

40400G04

ISO 9001:2008 CERTIFIED | ADSINC.COM

79

TOOLS & INSTRUMENTS BREACHING TOOLS

PRY-AXE

Here is a tool that has withstood the test of time. For over 40 years the Pry-Axe has remained the best selling tool in our line. The Pry-Axe is being used by military units, federal agencies, fire departments, police departments and rescue squads worldwide. The Pry-Axe is a lightweight, multi-purpose, slam and ram tool designed to pry, enlarge openings, cut sheet metal and twist off locks and latches. This efficient tool lets every firefighter force entry, rescue and ventilate without waiting for help. The Pry-Axe is small enough to carry and rugged enough for most jobs. The Pry-Axe head and claw assemblies are separate sections forged from high alloy steel and heat treated for maximum strength. A solid steel shaft is press fitted and pinned to the claw. A tubular steel handle is press fitted and welded to the head. A rubber sleeve over the handle provides a non-slip grip. The tool weighs 6.6 lbs (3 kg), and is 18 in (46 cm.) closed, and 26 in (72 cm.) extended. The Pry-Axe is electroless nickel plated for good looks and easy maintenance.

Model

Item Number

Pry Axe with metal cutting claw

22-000522T

Pry Axe with standard claw

22-000520T

A

B

C

A

BUSTER TOOL

The new Buster Tool from Paratech is the perfect compact forcible entry tool. Specially designed for breaching, it has the versatility and rugged strength to assist in doing what needs to be done. This lightweight but powerful tool can force entry or exit in most interiors, open walls or remove baseboards to check fire spread. The Buster Tool’s extended and locked claw assembly can be used for close quarters, chopping or for added prying leverage.

Low damage forcible entry to reach incapacitated victims is now possible before assist units arrive on the scene. The Buster Tool is available with your choice of two claws: compact and standard. The compact claw will pry windows, light door frames, enlarge openings in sheet metal and pull nails. The standard claw does all of the above and can be used for gas shut off, prying open larger doors and removing hinges from doors.

In the Aviation industry, the Buster Tool is also used as a cockpit crash axe and exceeds (SAE) Aerospace Standard (AS) 5402 which specifies the design and performance criteria for aircraft axes.

HOOLIGAN

C

PRT

Model

Item Number

Hooligan Electroless Black Chrome 36 in

22-000601T

The PRT is a powerful hand held tool that can be put to work with a minimal amount of training. The Slam and Ram action of the PRT directs all of its force directly at the point of impact – without deflection. A variety of interchangeable tool bits are available to penetrate most barriers.

Buster Tool with Compact Claw

22-000300T

Hooligan Electroless Black Chrome 42 in

22-000602T

Model

Item Number

Buster Tool with Standard Claw

22-000301T

Hooligan Single Piece Forged Holligan

22-000680T

PRT

22-000625T

Paratech has always been a leader in the design of rugged and reliable forcible entry tools and the new Buster Tool continues that tradition.

• Made in U.S.A.

80

B

The Paratech Hooligan Tool has set the standard of excellence for Hooligan type tools. Now available with a machined alloy shaft for lighter weight, these heavy-duty tools were designed to pry, pound, puncture, twist, and cut open or remove all types of barriers between emergency service personnel and the life they are saving.

• Made in U.S.A. • 1” stress proof bar

800.948.9433

Model

Item Number

Hooligan Electroless Black Chrome 24 in

22-000599T

Hooligan Electroless Black Chrome 30 in

22-000600T

TOOLS & INSTRUMENTS

D

E

BREACHING TOOLS

F

D

VEHICLE STABILIZATION KITS

Paratech’s VSK are the strongest and easiest vehicle stabilization kits to use. Paratech Vehicle Stabilization Kits have the strength and flexibility to handle any size vehicle anytime, anywhere. This includes sub compact cars, buses, cement trucks and even train locomotives.

Additionally, these components provide the extra value of being completely interchangeable with your other Paratech equipment for building collapse and trench rescue scenarios. They are strong, sturdy and reliable. Paratech systems are the easiest to use and the strongest VSKs on the market today.

Please contact ADS for ordering information

F

MAXIFORCE®

The MAXIFORCE® Air Lifting Bag is a thin, strong, molded envelope available in 14 different sizes. It is made from 3 layers of Neoprene covered Aramid fiber reinforcement and has the power to lift, move or shift weights up to 70 tons (63.5 metric tons) per bag. Control equipment and components play a critical role in successful lifting bag use and unlike other lifting bag systems, Paratech manufactures all of its major control components. This assures the quality of the lifting bag system from inflation to deflation.

• Made in U.S.A. Model

Item Number

LIGHT US&R RESCUE STRUT SYSTEM

Maxiforce 234 kit

22-889234

Maxiforce 117 kit

22-889117

This system affords the rescuer the ability to tackle most any structural collapse scenarios. The system includes (1) 6’ Raker set and numerous Rescue Struts and components which would be a great start to any Fire Department looking to be more involved in structural collapse incidents.

Maxiforce 48 kit

22-889048

Maxiforce 92 kit

22-889092

Maxiforce 245 kit

22-889245

Maxiforce Master Control Package

22-889300

Please contact ADS for ordering information

Maxiforce Control Package 51

22-889351

E

Maxiforce Master Control Package

F

adsinc.com benchmade

TOMAHAWK

The perfect tool for tactical and breaching operations.

• Overall Length: 16” - 25” • Blade Material: 1095 • Handle Material: Textured and Contoured G10 onlay.

• Made in USA Model

Item Number

Tomahawk

172BK

ISO 9001:2008 CERTIFIED | ADSINC.COM

81

TOOLS & INSTRUMENTS EXTRACTION TOOLS

For the past 30 years, Holmatro® Rescue Equipment has been at the forefront of many product technology improvements. After decades of innovative firsts, Holmatro® now introduces a revolutionary new technology that is sure to be one of the most important innovations in the field of extrication, ever: What is CORE Technology™?

CORE Technology™ is a hydraulic system that employs Coaxial Rescue Equipment hose, couplers, pumps and tools. At the CORE of this system is our revolutionary fluid path technology.

This coaxial hose design consists of a high pressure CORE, surrounded and protected by the low pressure return. What makes our coaxial hydraulic hose possible is our patented CORE Technology™ coupler. These couplers have a built-in, automatic return valve that eliminates the need for a dump valve on the pump, simply connect the hose and you’re ready to go.

Why CORE Technology™?

CORE Technology™ is a revolutionary turning point in rescue tool technology. More than just a new tool, hose or power unit, CORE Technology™ is a new hydraulic system that fundamentally changes the extrication process. When lives are at stake, it’s all about speed and safety. CORE Technology™ is significantly faster, easier and safer, allowing rescuers to focus on the rescue operation, not the rescue equipment. Once you work with CORE Technology™ and discover the unprecedented benefits, you won’t want to go back to a twin line system.

A

B

C

D

A

4150

B

4240

• • • • • • •

Spreading distance: 14¼ inch Spreading force: 16,166 lbs Cutting opening: 9 inch Cutting force in recess: 67,600 lbs Dimensions: 31” x 9 5/16” x 7 ½” (787 x 236 x 190 mm) Weight ready to use: 31 lbs UL Listed & NFPA Compliant

• • • • •

Max. spreading force (at back of tip): 33,365 lbs Max spreading travel: 27 3/8 inch Dimensions: 30 3/8” x 11 ¾” x 8 1/8” (771 x 297 x 206mm) UL Listed and NFPA Compliant

Model

Item Number

4150

4150

C

4035NCT

800.948.9433

Item Number

4240

4240

D

• Max. blade opening: 5 11/16” • Max. cutting force: 57,320 lbs • Dimensions: 28¾” x 9 5/16” x 7½” (731 x 236 x 190 mm) • Weight ready to use: 31 lbs • UL Listed & NFPA Compliant

82

Model

HYDRAULIC HOSE

• Bend restrictors: black injection molded rubber.

• Standard available lengths: 16 ft. (5 m) • Primary features: shielded pressure CORE & auto return valve built into coupler.

• Colors: Orange, Green, Blue and Black • NFPA Compliant

Model

Item Number

Model

Item Number

4035NCT

4035NCT

Hydraulic Hose

HYDRAULIC HOSE

TOOLS & INSTRUMENTS

SMC 4006

E

Working pressure: 10,500 psi Blade opening: 0.98 inches Cutting force, C0: 43,388 lbsf Round bar: 3/4 inch Operating temperature: -4°F to 131°F Required oil contents: 0.61 cu. in.

Handle: Adjustable rotating Dimensions: 15.3” x 14.5” x 9.2” Weight ready to use: 14.5 lbs

Model

Item Number

SMC 4006

SMC 4006

EXTRACTION TOOLS

• • • • • • • • •

F G

E

SP10 PC

• • • • • • • •

Motor: Honda 4 stroke, 2.1 hp Pump type: 2-stage radial piston pump Capacity fuel tank: 0.81 qts Usable hydraulic oil: 2.96 qts Output 1st stage: 150 cu in/min Output 2nd stage: 38 cu in/min Dimensions: 15 ½” x 12 3/8” x 16 1/8” Weight ready to use: 33.75 lbs

F

Model

Item Number

SP10 PC

SP10 PC

• • • • • • • • •

PU5

G

DPU30

Motor: Honda 4 stroke, 2.5 hp Fuel tank capacity: 1.26 qts Usable hydraulic oil: 0.56 qts Pump type: two-stage radial piston pump Output 1st stage (0 to 190 bar): 148.9 in 3/min.

Output 2nd stage (190 to 720 bar): 37.8 in 3/min..

Dimensions: 12 13/16” x 10 5/8” x 15 11/16” Weight ready to use: 26.5 lbs NFPA Compliant

• • • • • • • • •

Motor: Honda GX100 3.0 hp Pump type: 2x two stage radial piston pumps Capacity fuel tank: 1.5 qts Usable hydraulic oil: 3.2 qts Output 1st stage (2,900 psi): 2 x 131 in 3/min..

Output 2nd stage (10,500 psi): 2 x 27.5 in 3/min..

Dimensions: 19 5/8” x 13¼” x 16” Weight ready to use: 60.5 lbs NFPA Compliant

Model

Item Number

Model

Item Number

PU5

PU5

DPU30

DPU30

ISO 9001:2008 CERTIFIED | ADSINC.COM

83

TOOLS & INSTRUMENTS

4340

EXTRACTION TOOLS

• • • • • • • • •

A

C

84

800.948.9433

Max. spreading force 1st section: 49,145 lbs Max. spreading force 2nd section: 18,210 lbs Max. spreading distance: 11 inch Piston length 1st Section: 6 1/8 inch Piston length 2nd Section: 4 7/8 inch Max extended length: 23 inch Dimensions: 12” x 13¾” x 6 1/8” Weight ready to use: 24 lbs NFPA Compliant

Model

Item Number

4340

4340

B

D

A

HCT 3120

• • • • • •

Spreading distance: 10½ inch Spreading force: 11,690 lbs Cutting opening: 7½ inch Cutting force: 49,000 lbs Dimensions: 27½” x 8 1/16” x 6 7/16” Weight ready to use: 23 lbs

Model

Item Number

HCT 3120

HCT 3120

B

4321

• • • • • • •

Max. spreading force: 36,460 lbs Number of plungers: 1 Stroke: 9.75 inch Max length: 31 inch Dimensions: 21½” x 13½” x 4 7/8” Weight ready to use: 26 lbs UL Listed & NFPA Compliant

Model

Item Number

4321

4321

C

4350

• • • • • • • • •

Max. spreading force 1st section: 49,145 lbs Max. spreading force 2nd section: 18,210 lbs Max. spreading distance: 29.25 inch Piston length 1st Section: 15.25 inch Piston length 2nd Section: 14 inch Max extended length: 50.25 inch Dimensions: 21” x 13¾” x 6 1/8” Weight ready to use: 37 lbs NFPA Compliant

Model

Item Number

4350

4350

D

4331

• • • • • • •

Max. spreading force: 36,460 lbs Number of plungers: 1 Stroke: 13.75 inch Max length: 39 inch Dimensions: 25¼” x 13½” x 4 7/8” Weight ready to use: 30 lbs UL Listed & NFPA Compliant

Model

Item Number

4331

4331

TOOLS & INSTRUMENTS

E BATTERY OPERATED COMBI TOOL DELUXE KIT

With built-in micro pump technology, this 24 volt battery powered hydraulic rescue tool enables you, as a first responder to act anytime, anywhere. With integrated advanced electronic controls, which were developed in cooperation with one of the world’s leaders in battery systems, DEWALT®, the BCT4120 is unmatched in performance.

Producing forces equivalent to Holmatro’s standard 3120 Combi Tool, this self contained system frees you from encumbering hoses or power cords, offering mission critical mobility without sacrificing power.

• Powered by commercially available DEWALT® NiCad batteries • Unlike lead/acid batteries, NiCad batteries produce no dangerous hydrogen gas • Batteries recharge to full in only one hour • 4 Functions in one tool: spread (lift), cut, squeeze, pull • Quick change battery system – swap batteries in seconds • Completely self contained: No external power packs or power cords.

• Auxiliary power port allows connection to external power for extended operations ( i.e. slave power port on Humvee) • Weather resistant • Weight: 34 lbs • Dimensions: 28” x 12” x 9” (3024 cu in.)

E

EXTRACTION TOOLS

F

Kit Includes: Black BCT tool, 2 batteries, shoulder strap, DC Power Cord, AC Charger, Custom Pelican® Case Model

Item Number

Battery Operated Combi Tool Deluxe Kit

BCT4120DLX-WC-B

G

H

F TACTICAL SELF CONTAINED RESCUE TOOL

Hand-powered combi tool with full rescue capabilities for confined space or remote locations. Also suitable for certain situations where internal combustion engines cannot be operated due to: noise (stealth) or fumes (interior rescue).

• 4 Functions in one tool: spread (lift), cut, squeeze, pull • Completely silent operation • Light and compact design • Fits in many existing military rucksacks.

• Operates underwater • Weight: 23 lbs • Dimensions: 27.5” x 8” x 6.5” (1430 cu in.)

Model

Item Number

Tactical Self Contained Rescue Tool

HCT3120-B

G

I

OPTIONAL BACKPACK

Backpack for BCT4120 or HCT3120, black nylon Model

Item Number

Optional BackPack

BackPack

H

OPTIONAL HUMVEE CORD

50’ DC Power Cord with MIL-SPEC plug for connecting a battery operated combi tool (BCT4120) to the auxiliary slave power port in military vehicles Model

Item Number

Optional HumveeCord

HumveeCord

I

CORE TECHNOLOGY HOSES

• Length: 16’, 32’, 50’ • Color: Green, Black Contact ADS for ordering information

ISO 9001:2008 CERTIFIED | ADSINC.COM

85

TOOLS & INSTRUMENTS EXTRACTION TOOLS

A

A

Model

Item Number

PU5 Mini Rescue Tool Pump

PU5-B

B

TACTICAL COMBI TOOL

Rescue tool that enables cutting, spreading, squeezing and pulling with one tool. Unique blade design guarantees a smooth and controlled operation. Especially suitable when there is limited space on the rescue truck..

• Cutting, spreading, squeezing and pulling with one tool • Large blade opening • Unique blade design • Weight: 31 lbs • UL Listed & NFPA1936 Compliant!

• Compact design provides better access into tight spaces • Patent pending design maintains torque for more effective cutting • Stainless steel cover protects bolt and blade holder Model

Item Number

Tactical Combi Tool

4150-B

C

B

C

86

PU5 MINI RESCUE TOOL PUMP

Ultra-portable gas powered rescue tool pump with carrying handle.

Suitable for operation of hydraulic cutters, spreaders, combi tools and single-plunger rams.

• CORE Technology™ • 4 Hour Run time • Honda 4 Stroke, 2.5 hp engine • Weight: 26.5 lbs • NFPA Compliant

800.948.9433

TACTICAL RAM

Rams are invaluable in situations where the front of the vehicle is causing entrapment of the occupants. The 4321 has an integral speed valve giving 35% quicker opening time. This ram comes standard with CORE Technology™.

• Pushing force: 36,460 lbs • Operates underwater • Aggressive grip head design • Grip heads rotate even under load • Extensions available to increase opening • Weight: 26 lbs • UL Listed & NFPA1936 Compliant!

Model

Item Number

Tactical Ram

4321-B

6.5" Extension

6.5EXT-B

13" Extension

13EXT-B

See these products on YouTube at:

youtube.com/adstactical

TOOLS & INSTRUMENTS

adsinc.com power-hawk

EXTRACTION TOOLS

DAMAGE CONTROL KIT

Extremely powerful and uniquely versatile, the Power Hawk Rescue System is unlike any other rescue tool in the world.

This All-Electric (no hydraulics) “jaws” type rescue tool utilizes Curtiss-Wright aerospace gear technology developed for demanding military fighter-jet flight controls. By eliminating hydraulics completely and utilizing 12 Volts DC power, the VERSATILITY of the POWER HAWK makes it the perfect choice for: • • • • •

Vehicle Extrication (including Armored) Aircraft Rescue Damage Control Rapid-Intervention Teams Collapse rescues

• • • •

The POWER HAWK P-16 Rescue Tool is the ONLY Battery-Powered Rescue Tool that is Certified Compliant by Underwriters Laboratories (UL) to NFPA 1936 – The Standard for Powered Rescue Tools. The Department of Homeland Security (DHS) has adopted NFPA 1936 and requires compliance for all related Grants.

• Enormous spreading and cutting forces using 12 Volts DC battery power WITHOUT HYDRAULICS! (No combustible fuels, No hydraulic fluids, No high pressure hoses) • Power Blade “Cross-Over” feature enables prying operations to begin from a gap that is less than a ¼” wide.

• 70-degree pivot of the P-16 Rescue Tool powerhead enables both spreaders and cutters to get into tight areas or work “around-the-corner”.

• Spreader, Cutter, and Combi Tool Attachments can be changed in seconds, providing multiple-use capability in just one tool. Easy to add-on or replace spreader and cutter parts.

• Lightweight and Portable.

• Super Compact. Easily stowed inside vehicles and aircraft.

• Low maintenance.

• Rapid Response - No Setup.

• Quiet Operation.

• Performs in Harsh environments; Sand / Water / Hot / Cold / O2-depleted atmospheres.

• 12 Volts DC back-up power readily available with spare battery packs or by connecting directly to military or civilian vehicles using the supplied jumper cables or Vehicle Harness kit.

• Long-lasting, no-spill battery (Certified as non-hazardous for transport) • Simultaneously run accessories from the Power Pack such as the Milwaukee Impact Wrench, Sawzall, Circular Saw, RamFan blower, lights, winches, and more. Standard power outlet can power cell phones, computers, etc.

Model

Item Number

P-16 Rescue System

DC-1

Remote rescues Indoor and confined space operations Forcible entry Special operations and more.

Contents:

Item Number

Contents:

Item Number

Rescue Tool

P-16

Jumper Cables, 16 Ft.

JC4-16

Attachment Pins

AP-1600

Extension Cable, 16 Ft.

EC4-16

Spreader Arms

S-1601

Power Pusher Ram, 40 in.

P-40

Curved Cutter

C-1601

Power Pusher Ram, 25 in.

P-25

Power Blade

CS-1602

Extension, Ram – 24 in.

E-24

Power Cable

CA-4M

Extension, Ram – 48 in.

E-48

Controller Unit

PC-100

Swivel Base Kit, Ram

2C0551-1

Power Pack (QTY-2)

PWR-3X12

Coupling, Ram (QTY-2)

2C0516-1

Battery Charger

BC-U1

Sawzall Extrication Kit

SZA-1015

Flood Light

LB-1204

Back Pack

BKPK-100

ISO 9001:2008 CERTIFIED | ADSINC.COM

87

TOOLS & INSTRUMENTS MRO POWER TOOLS

™ 18V CORDLESS XRP LI-ION 4-TOOL CORDLESS COMBO KIT • DCD970 XRP™ 18V cordless hammerdrill with patented 3-speed all-metal transmission and 1/2” self-tightening chuck delivers 450 units watts out of maximum performance, faster application speed, and superior bit retention • DC827 18V impact driver delivers 1,330 in-lbs of torque and 0-2,400 RPMs offering power and speed to perform a wide range of fastening applications at faster speeds • DC385 18V reciprocating saw with 4-position keyless blade clAMP allows for quick blade change without touching blade or reciprocatin shaft • DW919 18V flexible floodlight provides hands-free use • XRP™ LI-ION extended run-time batteries provide superior ergonomics, long run-time & battery life Model

Item Number

4-Tool Cordless Combo Kit

DCK475L

18V Impact Driver

DC827

18V Reciprocating Saw

DC385

18V Flexible Floodlight

DW919

A

A

10.0 AMP RECIPROCATING SAW

C

• 4-position blade clamp allows for flush cutting and increased versatility • Powerful 10.0 AMP motor designed for heavy-duty applications • Keyless lever-action blade clAMP for quick and easy blade changes • 0-2,800 strokes per minute and 1-1/8” stroke length deliver fast cutting • Variable speed trigger allows user to instantly control speed from 0 to dialed setting Model

Item Number

10.0 AMP Reciprocating Saw

DW304PK

B

C 18V CORDLESS COMPACT LI-ION HAMMERDRILL/IMPACT COMBO KIT

• Combination sets provide a selection of blades for common applications • Tough case expands to hold 9” blades and is designed to fit in power tool kit box for quick blade storage

• DCD775 18V 1/2” compact hammerdrill delivers 350 unit watts out of maximum power • DCF826 18V Impact Driver delivers 1,330 in-lbs of torque & 0-2,400 RPMs offering power & speed to perform a wide range of fastening applications at faster speeds • Compact li-ion batteries (DC9181) charge in 30 minutes & are compatible with the existing system of DEWALT 18V power tools produced since 1996

Model

Item Number

Model

Item Number

15 Bi-Metal Reciprocating Blade Set

DW4803

18V Hammerdrill / Impact

DCK266L

15 PC. BI-METAL RECIPROCATING SAW BLADE SET WITH MEDIUM TOUGH CASE B

88

800.948.9433

• DC720 18V 1/2” compact drill/driver delivers 410 unit watts out of maximum power • DW936 18V trim saw with 5-3/8” 16-tooth carbide blade and rip fence can cut a “2x4” in a single pass • DW938 18V cordless reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft • DW908 18V pivoting head flashlight which allows light to be projected in any direction

D

Item Number

Heavy-Duty 18V 4 Tool Combo Kit

DC4CKITA

18V 1/2” Compact Drill/Driver

DC720

18V Trim Saw

DW936

18V Cordless Reciprocating Saw

DW938

18V Pivoting Head Flashlight

DW908

MRO POWER TOOLS

D

Model

TOOLS & INSTRUMENTS

HEAVY-DUTY 18V COMPACT CORDLESS 4-TOOL COMBO KIT

E

1/2” 18V CORDLESS XRP™ LI-ION DRILL/DRIVER KIT

• XRP™ Li-Ion extended run-time batteries provide superior ergonomics, long run-time & battery life • 3 Internal pockets designed specifically to hold Camelbak reservoirs.

• Patented 3-speed all-metal transmission matches the tool to task for fastest application speed & improved run time • Heavy-duty 1/2” ratcheting chuck helps prevent bits from slipping & falling out • LED Worklight provides increased visibility in confined spaces • High power, high efficiency motor delivers 450 unit watts out of max power for superior performance in all drilling & fastening applications Model

Item Number

1/2” 18V Cordless Drill/Driver Kit

DCD960KL

E 1/2” 18V CORDLESS XRP™ LI-ION HIGH TORQUE IMPACT WRENCH KIT

• • • • • •

300 ft-lbs of maximum torque to perform a wide range of heavy-duty fastening applications 1,650 RPM/2,600 bpm for faster application speed Preferred rocker switch design for fast & easy fastening Comfort grip provides maximum comfort Durable magnesium gear case & all metal transmission for extended durability Heavy-duty impacting mechanism directs torque to fastener without kickback

Model

Item Number

1/2” High Torque Impact Wrench Kit

DCF059KL

ISO 9001:2008 CERTIFIED | ADSINC.COM

89

TOOLS & INSTRUMENTS MRO POWER UNITS

HIPPO MULTI POWER UNITS A

A

HIPPO POWER TRACK 2022SP

The Mobile Hydraulic Equipment Company HIPPO 2042E multipower pack is a skid mounted, self contained, diesel-engine-driven power pack, which provides air, electric, hydraulic, and welding power for continuous duty use by a wide variety of heavy duty hand held power tools. Impact hammers, cut off saws, trash pumps, drills, etc will will operate up to 8 hours on a single tank of JP8 or diesel fuel. On board coolers keep oils and fluids at optimum temperatures during operation. Hydraulic hoses, electric wiring, and air lines are all color coded and labeled to indicate component parts for ease of maintenance and diagnostics. The HIPPO 2042E weighs approximately 1650 lbs and is 64L x 36W x 41H. Mission: Provide power to heavy duty hand held power tools for the highly mobile small foot print Combat Engineer (or similar force) and Maintenance worksite. Direct support of Civil/Military disaster relief, construction, or maintenance worksites requiring lots of movement of power units within the worksite.

The HIPPO Power Track 2022SP will provide: • Hydraulic tool circuits – Two (2) circuits with adjustable flow of 5 or 10 GPM each @ 2000psi • Hydraulic Hose Reels – Two (2) 50 foot hydraulilc hose reels • Exterior Worksite Lights – Two (2) 12 volt high intensity LED adjustable flood lights • Heavy Duty Tool Platform – Holds up to 9 heavy duty tools • Optional Hydraulic driven generator - delivers up to 5.2KW, 120 Volts AC, at 60 Hz • Optional Hydraulic driven welder, which delivers up to 200 AMPS DC of welding power Model

Item Number

HIPPO Power Track 2022SP

2022SP

B

B C

HIPPO 2032E

The Mobile Hydraulic Equipment Company HIPPO 2032E multipower pack is a skid mounted, self contained, diesel-engine-driven power pack, which provides air, electric, and hydraulic, power for continuous duty use by a wide variety of heavy duty hand held power tools. Concrete saws, jack hammers, trash pumps, hammer drills, chop saws, etc will operate up to 8 hours on a single tank of JP8 or diesel fuel. On board coolers keep oils and fluids at optimum temperatures between during operation. Hydraulic hoses, electric wiring, and air lines are all color coded and labeled to indicate component parts for ease of maintenance and diagnostics.

The HIPPO 2032E weighs approximately 1650 lbs and is 64L x 36W x 41H. Mission: Provide power to heavy duty hand held power tools for the Combat Engineer (or similar force) worksite. Direct support of Civil/Military disaster relief or construction worksites.

The 2032E unit provides: • Hydraulic driven generator - delivers up to 5.2kw, 120 Volts AC, at 60 Hz • Hydraulic tool circuits – Two (2) circuits with adjustable flow of 0 to 10 GPM @ 2000psi • Air compressor – Flooded screw 40 CFM or 80 CFM @ 110 PSI (using the selector) Model

Item Number

HIPPO 2032E

2032E

C

HIPPO 2042E

The Mobile Hydraulic Equipment Company HIPPO 2042E multipower pack is a skid mounted, self contained, diesel-engine-driven power pack, which provides air, electric, hydraulic, and welding power for continuous duty use by a wide variety of heavy duty hand held power tools. Impact hammers, cut off saws, trash pumps, drills, etc will will operate up to 8 hours on a single tank of JP8 or diesel fuel. On board coolers keep oils and fluids at optimum temperatures during operation. Hydraulic hoses, electric wiring, and air lines are all color coded and labeled to indicate component parts for ease of maintenance and diagnostics. The HIPPO 2042E weighs approximately 1650 lbs and is 64L x 36W x 41H. Mission: Provide power to heavy duty hand held power tools for the Combat Engineer (or similar force) and Maintenance worksite. Direct support of Civil/Military disaster relief, construction, and maintenance worksites.

The 2042E unit provides: • Hydraulic driven generator - delivers up to 5.2KW, 120 Volts AC, at 60 Hz • Hydraulic tool circuit – One (1) circuit with adjustable flow of 0 to 10 GPM @ 2000psi • Air compressor – Flooded screw 40 CFM or 80 CFM @ 110 PSI (using the selector) • Hydraulic driven welder- delivers up to 200 AMPS DC at 70% duty cycle

90

800.948.9433

Model

Item Number

HIPPO 2042E

2042E

WITH ADVANCED ELECTRONICS

MRO VEHICLE LIFTS

The ARI-HETRA HDML Mobile Lifting System is unmatched for its safety, flexibility and ease-of-use.

• No installation necessary • Mobile • Top mounted system controls • Watertight aluminum extrusion • Simplifies the removal of springs suspensions, brakes, engines and transmissions • Self Diagnostics - Operating status displays error codes and fault information.

• Emergency stop button • Ball bearing screw-nut assembly for safety • Electrical security devices to stop the mobile lift in case of electrical failure or overload • Other Colors availible on request

TOOLS & INSTRUMENTS

HEAVY-DUTY MOBILE LIFT SYSTEM

Please contact ADS for ordering information

HYBRID MOBILE LIFT SYSTEM WITH ADVANCED ELECTRONICS

ARI-HETRA has launched its most advanced Mobile Lifting platform. The new 24 Volt system utilizes dual industrial strength batteries and a Patent Pending hybrid power system. You can now use 110 Volt power to run your lifts. This system has been environmentally friendly engineered to provide energy savings and the stewardship of resources. This system contributes to the maintenance building’s LEED (Leadership in Energy and Environmental Design) Green Building Rating System certification to reduce operating environmental footprint.

• Power Saving - After 2 minutes of inactivity, the lifts power down automatically to conserve energy.

• LED Control Panel - Load cell displays weight at each post. lifted height displayed for absolute control in restricted space areas. Displays in either standard or metric units.

• Electronic Overload Protection - Shuts system down when load is over the rated capacity.

• Advance Hybrid Control System - Weight from lifted vehicle is used to regenerate power, whitch is restored to the batteries.

• Emergency stop button • Ball bearing screw-nut assembly for safety

Model

Item Number

Hybrid Heavy-Duty Mobile Lift System with Advanced Electronics

HBP-HDML-10-4

ISO 9001:2008 CERTIFIED | ADSINC.COM

91

TOOLS & INSTRUMENTS

adsinc.com benchmade

Products from this manufacturer are available from ADS through GSA.

RESCUE HOOKS

8BLKWMED

8 HOOK

The extended handle on the 8 Hook provides leverage and is perfect for a gloved grip.

• Unparalleled Rapid Response Cut Ability • Durable Edge Quality and Versatile Design • Multiple Carry Options • Made in USA Model

Item Number

8 HOOK w/ Black MOLLE® Compatible Soft Sheath NSN: 4240-01-568-3219

8BLKW

8 Hook With Large Handle

8BLKH

8 HOOK w/ Hard Sheath

8BLK

8 HOOK w/ Coyote MOLLE® Compatible Soft Sheath 8BLKWSN

8BLKH

8 HOOK w/ Foliage Green MOLLE® Compatible Soft Sheath

8BLKWADC

8 HOOK w/ O2 wrench and syringe popper; Black MOLLE® Compatible Soft Sheath

8BLKWMED

8 HOOK designed for demolition team use; 5.5" long 8BLKEOD RFI

A

7 HOOK

The 7 Hook was designed for a variety of emergency utility situations.

The handle is elongated for reaching tight places in addition to supplying more stability in your grip. The rounded end of the hook provides safety from contact with the skin while the edge on the 440C blade steel slices through seatbelts, netting and clothing with ease. The handle is covered in a black PVC coating that adds durability and grip.

• Blade Material: 440C Stainless Steel • Blade Style: Rescue Hook/Strap Cutter • Weight: 1.50oz.

• Overall Length: 4.30” • Blade Opening: 0.050” Wide • Made in USA

A

7BLKW

Model

Item Number

7 HOOK w/ Black MOLLE® Compatible Soft Sheath NSN: 4240-01-543-9618

7 BLKW

7 HOOK w/ Coyote MOLLE® Compatible Soft Sheath 7 BLKWSN

B

7 HOOK w/ Foliage Green MOLLE® Compatible Soft Sheath

7 BLKWADC

7 HOOK w/ X15-TN Corrosion Resistant Steel Orange Handle w/ Black MOLLE® Compatible Soft Sheath

7 H20W

7 HOOK w/ X15-TN Steel - Black Handle w/ Black MOLLE® Compatible Soft Sheath

7 BH20W

B

9 HOOK

The new light weight 9 Hook features a molded handle, sliding blade guard and carabineer clip. Like our other hooks, the edge on the premium blade steel performs flawlessly in quick cut situations. Made in USA.

92

800.948.9433

Model

Item Number

9 HOOK w/ glass-filled nylon yellow handle; sliding blade guard; carabineer clip; bottle opener

9CB-YEL

9 HOOK w/ glass-filled nylon black handle; sliding blade guard; carabineer clip; bottle opener

9CB-BLK

The T3 Series of Thermal Imagers from Bullard share a common thread…incredible durability with the market’s favorite handheld design. With a wide selection of models in the series, Bullard has products that precisely fit your department’s application and budget.

TOOLS & INSTRUMENTS

T3 SERIES

THERMAL IMAGING

C

C

T320™ – ULTIMATE VERSATILITY

D

D

T3MAX™ – ECONOMIC VERSATILITY

The T320™ offers the industry’s highest resolution in a “Back to Basics” one button format or with Bullard’s exclusive Electronic Thermal Throttle™ feature. The higher resolution T320 provides crisp, clear images, critical for analyzing complex fire scenes.

• Ultra-High Resolution 320 x 240 infrared engine • Advanced Relative Heat Indicator provides • Optional Electronic Thermal Throttle reveals temperature measurement hidden fire & distinguishes hotter objects • Engineered Bullard Tough!

• Super Red Hot pinpoints fire source & progression • Now with new, higher performance display

The T3MAX™ combines the economic advantages of a high resolution thermal imager with the unique capability of the Electronic Thermal Throttle. The T3MAX™ offers uncompromising capability without breaking the bank.

• 160 x 120 Resolution • Advanced Relative Heat Indicator provides • Optional Electronic Thermal Throttle temperature measurement • Super Red Hot details high heat • Now with new, higher performance display • Engineered Bullard Tough!

Multiple configurations available. Contact ADS for ordering information.

Multiple configurations available. Contact ADS for ordering information.

E E

ECLIPSE: PERSONAL-ISSUE THERMAL IMAGING

Small enough to secure to a firefighter’s gear and priced to meet the budget of almost any fire department, Eclipse™ is the first personal-issue thermal imager for the fire service. The features and resolution of Eclipse make it best suited for navigational and search and rescue uses inside a fire scene. Affordably priced, Eclipse gives fire departments of all sizes the opportunity to bring thermal imaging to more firefighters.

• Ultra-small form factor • Bullard SmartLine™ online training • Super lightweight • Eclipse Powerhouse™ charger available • Large, glove friendly, easy one-button operation • Rugged retractable strap lanyard available • 1,000 degree dynamic range • Optional High Heat Colorization • 80 x 60 array • Optional Temperature Measurement • Desktop charger with one battery standard • Optional Electronic Thermal Throttle™ • Extended warranty available Multiple configurations available. Contact ADS for ordering information.

ISO 9001:2008 CERTIFIED | ADSINC.COM

93

TOOLS & INSTRUMENTS THERMAL IMAGING

T4MAX

MAXIMUM IMAGE QUALITY AND PERFOMANCE The new T4MAX™ thermal imager delivers unrivaled performance and image quality on the industry’s largest, brightest viewing display. Equipped with Technology Optimization Package (T.O.P.) offering greatly enhanced engine and display performance integration, the T4MAX is the ultimate choice for fire fighting thermal imaging.

• Technology Optimization Package (T.O.P.) optimizes display and engine performance for unmatched scene dynamics and image clarity • Ultra-High resolution 320 X 240 detector • Super Red Hot™ colorization alerts firefighters to areas of intense heat • Electronic Thermal Throttle® isolates heat sources • More than 1100°F saturation temperature • Improved 4.3” widescreen format Liquid Crystal Display • Super-bright display enables viewing in thick smoke and direct sunlight • 450:1 Contrast Ratio emphasizes deep blacks and bright whites and enhances image detail • 50° horizontal field of view • 2x and 4x digital zoom • Improved visibility • Ideal for applications including hazardous materials, wildfire, search and rescue Multiple configurations available. Contact ADS for ordering information.

Products from this manufacturer are available from ADS through GSA.

A

A

94

EAGLE IMAGER® 320 WITH PAK TRACKER™

B

B

EAGLE IMAGER® 320 THERMAL IMAGING CAMERA

The Eagle Imager 320 with Pak Tracker combines our advanced thermal imaging camera (DVR optional) and our legendary Pak Tracker technology into one rugged tool. Simplify training, reduce equipment load and, most importantly, quickly respond to downed firefighters.

• Berry Compliant • Made in USA

Excellent image quality is driven by the latest a-Si core technology, which generates 320 X 240 imagery to assist the firefighters with understanding their surroundings. MaxTemp™ indicates the temperature of the hottest object within the camera’s viewing area, eliminating much of the time necessary to evaluate hot spots.

• Berry Compliant • Made in USA

Multiple configurations available. Contact ADS for ordering information.

Multiple configurations available. Contact ADS for ordering information.

800.948.9433

THERMAL IMAGING CAMERA (TIC)

Model

Item Number

UCF 1600 With Thermal Scan Kit, Comes with UCF 1600 Camera, Pelican case, (1) Li Ion battery, Desktop charger, AC/DC cords, and Instructions for use

4057985

UCF 1600 without TS Kit, Comes with UCF 1600 Camera, Pelican case, (1) Li Ion battery, Desktop charger, AC/DC cords, and Instructions for use

4058035

UCF 1600 with Thermal Scan, Does not include battery or case

4058306

UCF 1600 Without TS, Does not include battery or case

4058305

Model

Item Number

UCF 3200 With Thermal Scan Kit, Comes with UCF 3200, Pelican case, (1) Li Ion rechargable battery, desktop charger, AC cords and Thermal imager Instructions for use

4057990

UCF 3200 without TS kit, Comes with UCF 1600 Camera, Pelican case, (1) Li Ion battery, desktop charger, AC/DC cords, and Instructions for use

4058040

UCF 3200 with Thermal Scan, Does not include battery or case

4058308

UCF 3200 Without TS, Does not include battery or case

4058307

THERMAL IMAGING

The Dräger UCF 1600 thermal imaging camera (160 × 120 resolution) and the Dräger UCF 3200 thermal imaging camera (320 x 240 high resolution) provides thermal imaging technology to provide more detail in hazardous environments allowing for safer operation while simplifying documentation and analysis of hazardous situations.

The Draeger UCF 1600 and the Draeger UCF 3200 come standard with a 2x digital zoom to double the picture selection size and bring distant objects into closer view and in greater detail. The UCF cameras also come standard with 6 different color pallets that give the cameras the ability to be used in more applications and provide more detail for indicating temperatures and optimize clear detailed images. The Optional Thermal Scan (TS) technology allows hidden sources of heat to be detected quickly and clearly.

The camera provides clear, detailed images in smoke-filled, firefighting environments and offers two transparent color (TC) operating modes for high and low temperature ranges. The Draeger UCF 1600 and 3200 are small, lightweight and extremely robust and incorporate an ergonomic design for comfortable handling and optimum operability. The VOx micro bolometer camera engine covers a wide dynamic range for optimal performance in unique image coloration and quality. The Draeger UCF 3200 has an advanced higher resolution (320 x 240 pixels) resulting in a more detailed image and provides a larger field of view. The unique “smart” battery management system holds a battery service life of up to 4 hours and a charging unit is provided for direct and simultaneous charging of the camera and the replacement battery.

The optionally integrated ThermalScan function provides an adjustable, temperature-dependent display of the operational area. Areas with a higher temperature will be displayed in yellow when selected by the user. The camera can be modularly upgraded with easy-to install-handles. The selection consists of a purely mechanical carrying hold, one for the wireless image transfer to the receiving terminal and one for the saving of images and movies.

Applications for thermal imaging cameras are numerous for firefighting and other industries. These cameras are used for orientation in darkness or in smoky rooms, for finding people, assisting in accidents with hazardous materials or for searching missing persons.

The sensor technology of a thermal imaging camera makes the thermal radiation of a person or an object visible and enables a graphic representation to be displayed on the camera screen. The major advantage of a thermal imaging camera is to locate people and objects clearly without the hindrances from external influences such as thick smoke or darkness. Thermal imaging cameras can deliver clear images where normal cameras or night vision devices fail.

TOOLS & INSTRUMENTS

adsinc.com draeger-safety

ISO 9001:2008 CERTIFIED | ADSINC.COM

95

TOOLS & INSTRUMENTS

adsinc.com msa

Products from this manufacturer are available from ADS through GSA.

A

EVOLUTION® 5800 THERMAL IMAGING CAMERA

Traditionally, in high temperatures, many thermal imaging cameras flash to “low sense” mode and produce an image of much lower quality. But not MSA’s Evolution 5800 TIC!

THERMAL IMAGING

A

You get: • Increased image resolution from 80,000 pixels (nominal), with best-in-class image quality from four times the picture elements (four times the information of previous TIC designs) • Five user selectable palettes, White hot, Black hot, Fusion, Fire and Ice, and Rainbow.

• A 3.5” display, larger for better resolution, making it easier for multiple users to see screen simultaneously • Standard 2x digital zoom that lets you zoom in on areas requiring a closer look • Twice the Low Sensitivity and image quality in the 320º to 1000º+ F range, for unparalleled imaging • High sensitivity with high-image definition over the widest temperature range up to 320º F versus competitors with a temperature range below 200º F. The Evolution 5800‘s ISDR is 4701, so it provides you with clearer, sharper, more detailed images in all temperatures.

Consistent Operations for Training & Mutual Aid: More and more, the Fire Service is expanding its use of TIC operations and training. Until now, almost every new thermal imaging camera had its own way of displaying temperature, remote transmitter activation, over-temperature warnings, and other TIC functions. This lack of consistency can lead to confusion and need for additional training.

To reduce this confusion, MSA has designed the Evolution 5800 with consistency of training built in. Fit, form, and function are the same as the Evolution 5800’s predecessors, the popular Evolution 5200 and 5600 TICs. The symbols and warnings are the same; color indicators are the same; and operation of both cameras is the same, simplifying training for departments who are familiar with using the Evolution 5200 and 5600 TIC. Professional Training: Expert training on TIC operation and use goes a long way toward developing a solid understanding of a TIC’s safety features and functions. Your MSA Fire Service Distributor can recommend TIC training programs from independent and objective organizations to help meet or supplement your department’s training needs.

Model

Item Number

Evolution® 5800 Thermal Imaging Camera

3400-94

B

B

EVOLUTION® 5600 THERMAL IMAGING CAMERA

MSA thermal imaging cameras are used by many of North America’s largest fire departments. For big city performance at an affordable price, choose MSA’s Evolution® 5600 Thermal Imaging Camera with high resolution and detailed image quality. This versatile TIC provides detailed images (with a focal plane array of 120 x 120, nominal 15,000 pixels) over a wide temperature range, in addition to safety and other exclusive offerings of MSA’s Evolution Series cameras.

MSA’s highly functional Heat Seeker and Quick Temp functions deliver unmatched performance and superior image quality at all temperatures, employing an easy-to-use, time-tested design. User-friendly features and enhanced TIC performance help to maintain low lifetime costs. Most TICs trade image quality for a wider temperature range to keep the camera operating in high heat environments. However, the Evolution 5600 TIC provides refined image quality over comparable competitive TICs in Low Sensitivity mode.

Only MSA thermal imaging cameras deliver High Sense image quality at up to 320º F, the temperature range that most often matches that of structural fires. In addition, only MSA offers Heat Seeker color images in both High and Low Sense modes. The affordable Evolution 5600 TIC offers high and low sensitivity, lightweight ergonomic design, Quick-Temp feature, and provides excellent image detail over a wide temperature range.

Consistent Operations of TICs Benefit Training and Mutual Aid Until recently, almost every new thermal imaging camera design employed its own specific display of temperature, remote transmitter activation, over-temperature warnings, and other TIC functions.

Unfortunately, this lack of consistency among TICs led to the need for additional training within or among different departments.

MSA’s Evolution 5600 TIC design offsets such ambiguity with consistency of training builtin. Fit, form, and function of the Evolution 5600 are the same as its predecessors, the popular Evolution 5200 and 5000 Series TICs. Also, symbols, warnings, color indicators, and operation of all three cameras are the same, simplifying training for departments already familiar with Evolution 5200 and 5000 Series TICs.

96

800.948.9433

Model

Item Number

Evolution® 5600 Thermal Imaging Camera

3400-92

TRAINING

Training Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

CATALOG PRODUCT LABELS Look for these symbols next to products in this catalog to quickly identify important ordering options or special characteristics.

Designated for the Army Rapid Fielding Initiative.

National Fire Protection Association Certified.

Products from this manufacturer are available from ADS through GSA. See these products on YouTube at: youtube.com/adstactical Look for these symbols and enter the adress to visit the manufacturers page on adsinc.com 97

TRAINING TRAINING SERVICES

TRAINING SERVICES Firefighting is a field of spontaneous physical demands. Success is predicated on meeting these demands quickly and competently, and human life often swings in the balance. Fifty percent of all firefighter fatalities are cardiovascular and fitness related.

FIRE FIGHTING & EMERGENCY RESPONSE TRAINING ADS represents the University of Maryland’s Maryland Fire and

• Firefighter Training

Rescue Institute through GSA to Federal and Department of Defense

• ARFF Training for Airport Firefighters

organizations. MFRI is a global education and training organization and

• Fire Inspector Certification Program

can present a series of training programs at their facilities in Maryland or

• Fire Service Instructor

at your DOD or Federal installation anywhere in the world. Programs can

• Fire Officer Certification Program

be selected from a very large curriculum of relevant classes or can be

• Hazardous Materials

custom made to meet your local needs. Here’s just a sample:

• Reservist Firefighter Training Program

Products from this manufacturer are available from ADS through GSA.

MARYLAND FIRE AND RESCUE INSTITUTE • Our training programs can be flexibly scheduled to accommodate your organization’s training demands.

• The Maryland Fire and Rescue Institute provides experienced, qualified instructional staff and all student materials. Student activities and a final examination are included in each program.

• The programs are based upon Job Performance Requirements of the National Fire Protection Association (NFPA)Standards.

• Each student must meet the minimum DOD Fire and Emergency Services Certification prerequisites for program entry and certification.

• Students are eligible for certification, in accordance with the National Board on Fire Service Professional Qualifications (NBFSPQ - the Pro Board), on successful completion of these training programs.

• HQ AFCESA/CEXF accepts Pro Board training through a Reciprocity Agreement.

• Students successfully completing our programs can also apply for college equivalent credits through the American Council on Education (ACE) program.

FOAM TRAINING Foam Training for protecting Aircraft, Installations, and Facilities has changed dramatically in the last few years. Driven by new technologies in chemistry and equipment, the entire concept of foam and foam delivery has changed. Jim Cottrell of Combat Support Products is one of the world’s leading instructors in this sometimes complicated subjects. Cottrell makes it understandable and relevant.

Cottrell, Chairman of the IFSTA Foam Committee, Haz Mat Specialist, and Foam Expert makes sense out of new fuels, new risks, and puts to bed some old myths. Whether you need updating because of new blended fuels, or for continuing education credit, these programs will give you the information you need in a lively format that will be memorable. DoD and Federal responders have some of the largest risks in the Foam world.

Programs can be custom made to reflect your specific risks.

98

800.948.9433

COMBAT SUPPORT PRODUCTS

Spec Rescue offers a wide range of specialty services that are outside of the instructional and consulting arena.

If you have a question about whether it can be done, here are some of the areas where we may be able to assist you: • TRAINING AND CONSULTING: Spec Rescue provides a wide range of training opportunities for your organization. Our training is unique in that we focus on not just the knowledge, skills and abilities you need to succeed, but in our “hidden modules” we focus on teamwork, team lifecycles and team decision training. If you do not see it in this course catalog, ask as we can custom design courses to fit your needs; if we do not offer it, we have a partner that does! Our consulting staff is available to evaluate, review and suggest methods and processes that can enhance your organizational capabilities, improve your teamwork and increase your margin of safety while reducing your risk

TRAINING SERVICES

About Spec Rescue Training

TRAINING

Products from this manufacturer are available from ADS through GSA.

• EQUIPMENT SALES: We offer a wide range of equipment from which you can choose. We are primarily an OEM dealer and work closely as prime distributors for some of the most recognized names in equipment. Our equipment cache includes rescue, HAZMAT, tactical, clothing and a robust selection from which you can choose. If you need it we have it.

• ORGANIZATION PLANNING AND RISK MANAGEMENT: There is an old saying in risk management “If it’s predictable, it’s preventable.” Our risk management programs can help you address everything from OSHA compliance to preparing for catastrophic events, terrorism and plan development and exercise. We are more than happy to discuss your needs • REMOTE SEARCH TEAMS: If you need a team of specialists to locate missing personnel, wreckage or have a unique need that only humans on the ground can provide let us know. We have a wide network of providers and past military operators and partnerships which enables us to assemble teams for just about any task. If we cannot assemble the team or if it is beyond our expertise, our partnerships with companies like AMTI, Global Mapping Systems, Blackwater and Waterborne greatly enhance your chances of success.

• SPECIALTY REPAIRS: We have worked above grade, below grade and at grade to repair some of the strangest items you can imagine. Thousand foot shafts completing pipe work and rigging high lines to repair netting are just a few of the unique jobs under our belts • CONFINED SPACE STANDBY TEAMS: If you need professionally run and equipped standby teams for high-risk entries, call us. Our team members have been involved in dozens of actual rescues and recoveries. Spec Rescue provides all of the equipment and personnel. We have provided standby teams for evidence recovery in court cases and in industrial and military settings.

• EXPERT WITNESS AND CASE REVIEWS: Spec Rescue's personnel are actively involved in providing expert witnesses for cases, case review for attorneys, deposition review and reporting and a wide range of services within the legal system. We have participated in a wide range of case review, reporting and testimony over the years and would be glad to provide references for firms we have worked with in the past. If we do not have someone with the expertise to assist you, our wide range of contacts outside of the company will enable us to provide you with an individual or organization that can provide the expert you seek.

• SYSTEMS CONSULTING/MULTIMEDIA: Spec Rescue offers a wide range of systems consulting practices including but not limited to: Systems affiliations and mergers SOP and policy implementation Program development Site evaluations and reports Team evaluations and response improvements Safety and OSHA compliance consulting Multimedia script writing, technical expertise and program review Movie script and cinema subject matter experts and advisors Contact Your ADS Representative For More Information and Ordering Details

If you do not see it here, call us and ask.

If we cannot provide the service, we know someone who can.

ISO 9001:2008 CERTIFIED | ADSINC.COM

99

TRAINING

Understanding Our Course Offerings When you see Awareness, Operations and Technician, we are describing a specific level of knowledge, skills and abilities (KSAs) which students receive at that level of training. In many contexts, it represents a direct alignment with the National Fire Protection Association (NFPA) standards or with OSHA job descriptions.

Awareness

TRAINING SERVICES

Products from this manufacturer are available from ADS through GSA.

Awareness training is the most important training most organizations will ever receive. All awareness level programs, regardless of length, are designed to allow your members to identify potential risks, hazards and problems at incidents and take the appropriate action to protect themselves, render the scene safe and Understanding Our Course Offerings begin the implementation of an incident command system. Learning what you can and cannot do is When you see Awareness, Operations and Technician, we are describing a specific level of knowledge, skills and abilcritical to survival and successful outcomes. ities (KSAs) which students receive at that level of training. In many contexts, it represents a direct alignment with the Awareness Operations

Rescue workers for public and private organizations turn to Spec Rescue for this highest level of technical training. Whether training on helicopter, water rescue or rope rescue at thousands of feet off the ground, these courses are designed for the serious rescue technician. Most offerings include intense, hands-on fieldwork which is required to learn the technical skills required to effectively deal with variety of need for If you have a unique response problem, an advanced team or aa specific emergency situations.

firefighters, industrial brigades, military, and EMS and law enforcement. Additionally, we can and have developed corporate programs to challenge your executives and staff to reach greater heights.

Specialty

Technician

Operations level training represents the first true opportunity for rescue teams to engage in offensive operations.

Depending thepublic type and scope of activity, this level of training provides specific set Rescue workersonfor and private organizations turn to SpecaRescue forofthis highest level of technical KSAs to respond to and mitigate certain types of hazards for specific types of incidents. In a stair training.

Whether training on helicopter, water rescue or rope rescue at thousands of feet off the ground, stepping approach, Operations personnel support Technician level personnel at a wide range these courses are designed for the serious rescue technician. Most offerings include intense, hands-on of operations.

Technician

Operations level training represents the first true opportunity for rescue teams to engage in offensive

Awareness training is the most important training most organizations will ever receive. All awareness level operations.

Depending on the totype this level training programs, regardless of length, are designed allowand your scope membersoftoactivity, identify potential risks,of hazards and provides a specific set KSAs to respond to and mitigate action certain typesthemselves, of hazards for specific problems at incidents and take the appropriate to protect render the scene types safe andof incidents. In a stair beginstepping the implementation of anOperations incident command system. support Learning what you can and cannot do is approach, personnel Technician level personnel at a wide range critical to survival and successful outcomes.

Specialty

Operations

National Fire Protection Association (NFPA) standards or with OSHA job descriptions.

of

of operations.

fieldwork which is required to learn the technical skills required to effectively deal with a variety of emergency situations.

training or continuing education, let us know. We thrive on listening to your needs and presenting you with a course that will exceed your expectations and challenge your team members. We design and offer specialty courses for If youfirefighters, have a uniqueindustrial response problem, an advanced a specific training or continuing brigades, military,team andorEMS andneed lawforenforcement.

Additionally, we can and have education, let us know. We thrive on listening to your needs and presenting you with a course that will developed corporate programs to challenge your executives and staff to reach greater heights. exceed your expectations and challenge your team members. We design and offer specialty courses for

First, use use this this catalog catalog as as aa guideline guideline for forour Spec Rescue courses and areas of Next, expertise.

Next, call your ADS First, courses and areas of expertise. please call please us to discuss how we can

Representative toasfit discuss how wecourses cantraining modify to fit your needs.

Rescue’s training isWhen an experience that modify needs.

Our iscourses an experience that willcall stay with youhow for we a lifetime. the going gets First, use courses this catalogto a your guideline for our and areas of expertise.

Next, please usSpec to discuss can will stay withto you for a lifetime.

When the rough, people not rise toMake thegoing occasion rather,falls they fall on back rough, people doyour not rise toOur the occasion –going rather,gets they fall onfortheir training. sure back theon modify courses fit needs. training is an experience that will stay back with you ado lifetime.

When the getsyour- team rough, people doin not riseworld tosure the occasion – rather, they fall back their training.

Makeinsure teamfrom falls back on the best the from Rescue. their training training.

Make your Spec team falls back on on the best training theyour world Spec Rescue. best training in the world from Spec Rescue.

Allhands-on hands-on evolutions least 2toinstructors to address any safety All evolutions requirerequire at least 2 at instructors address any safety considerations.

Course Offerings

Course OfferingsWMD & Domestic Terrorism

Rope Rescue 101 5 Rope Rescue Confined Space 102 6 Trench Rescue 104 8 Confined Space Vehicle & Machinery Rescue 106 10 Trench Rescue Structural Collapse 107 11 Vehicle & Machinery Rescue Water Rescue 108 12 Specialty Firefighting Structural Collapse 109 13 Military Law Enforcement 111 15 Waterand Rescue Helicopter Operations 112 20 Specialty Firefighting HAZMAT 113 21 specrescue.com 757-468-4513 Military and Law Enforcement 800.948.9433 Operations Helicopter

4

100

22 114

considerations.

& Domestic Terrorism Management and Leadership 23 115 5 WMD DHS/ODP FEMA Specialty Prog.

24 116 6 Management and Leadership Organizational and Operational Prog.

8 DHS/ODP FEMA Specialty Risk Management 26 118 Organizational and Operational 119 Incident System 27 10Command Management 120 Hospital Based Programs 28 11 Risk 121 Technical Rescue 28 Incident Command System 12 About the Administration of 13 Hospital Based Programs Spec Rescue 30 Technical Rescue 15 20 About the Administration of

22 23 24 26 27 28 28

TRAINING

Rope Rescue

Awareness

Rope Rescue Awareness This class meets and exceeds awareness level training as outlined in NFPA 1670, 1998 edition. Rope Rescue Awareness is the introductory level designed to familiarize the student with the techniques necessary to save himself or herself from harm by escaping from a hazardous environment. This is a superb class for the first time student, or the veteran rescuer who desires to brush up on basic skills. Course objectives include equipment familiarization (software and hardware) and rigging techniques. Consideration is given to the various construction and materials used in rope rescue equipment and their effect on rigging techniques. At the conclusion of the class, students will be able to demonstrate proficiency at knots, bends, harnesses, webbing and cordage used in rope rescue. Additional instruction will be given in rigging, rappelling, locking off, self-rescue and pick-off techniques.

TRAINING SERVICES

The internationally recognized Spec Rescue rope program is designed to take a novice rescuer through a graduated three part series of contextual training necessary to accomplish even the most difficult rescues. The student will begin by understanding the components used in rope rescue and will continue through a serious, hands-on curriculum focusing on victim transfer and techniques for rescues using horizontal and angled high lines. Also ask about customized programs to meet individual needs or specific standards!

It is taught through a combination of lectures, hands-on activities, case studies and group work and requires 2 days (16 hours).

Operations

Rope Rescue Operations Rope Rescue Awareness is the intermediate level rope class that addresses the equipment and techniques required to safely access, stabilize and remove victims of elevated or below grade accidents/illnesses. The class meets and exceeds the operations level objectives as outlined in NFPA 1670 and 1006. Course objectives include descending with a rack, ascending a fixed rope, lowering systems and safeties and mechanical advantages with pulleys and haul systems. The student will be challenged to engineer systems that defy gravity in order to affect above and below grade rescues. This course is recommended for all technical rescue personnel.

Pre-requisite: Rope Rescue Awareness or an equivalent course.

It is taught through a combination of numerous hands-on activities, case studies and group work and requires 4 days (32 hours) and a student to instructor ratio of 8:1 with a minimum of two instructors.

Technician

Rope Rescue Technician Rope Rescue Technician is the ultimate advanced level rope class designed to give the accomplished student the ability to perform techniques that involve tensioned rope systems. This class meets and exceeds the NFPA requirements for technician level training. Students will build systems to remove victims on rope systems who are horizontal or angled to the ground. Special emphasis is placed on methods that may be used to remove multiple trapped victims of above grade emergencies. This course is a fitting conclusion to the Spec Rescue rope program that will leave the student with the knowledge, skills, abilities and theoretical background necessary to perform even the most difficult rescues.

Pre-requisite: Rope Rescue Operations or an equivalent course.

It is taught through a combination of numerous hands-on activities, case studies and group work and requires 3 days (24 hours) and a student to instructor ratio of 8:1 with a minimum of two instructors.

Specialty

Industrial Fall Protection/Rope Access Employers who expose employees to working at heights are required by OSHA 1926.500 to train those employees on proper fall protection techniques and practices. This course covers topics such as OSHA 1926.500 requirements, equipment selection, fall protection systems, harness hand syndrome and lead climbing techniques. Additionally, options for self-rescue and aided rescue are discussed and practices in a safe and controlled environment. Upon course completion, students will be capable of working at heights in a safe and efficient manner.

This course will ensure your employees are trained to the OSHA 1926.500 standard. Additionally, fall protection training will help your company reduce injuries and lower insurance and workers compensation premiums.

It is taught through a combination of classroom lecture, hands-on activities and requires 2 days (16 hours) for initial training* and a student to instructor ratio of 8:1. *An annual refresher training course is recommended.

ISO 9001:2008 CERTIFIED | ADSINC.COM

757-468-4513

specrescue.com

5

101

TRAINING

Products from this manufacturer are available from ADS through GSA.

We can offer many custom courses for rescuers and industrial applications. Our PEERS course is a must for many emergency workers and addresses many specific skills required by rescue personnel. Customized courses can be developed and delivered to address specific workplace concerns or projects.

Personal Emergency Escape Rope System (PEERS) The PEERS has been developed to provide firefighters and rescuers with a means of escape from an environment where death is eminent and a rope escape is the only means of survival. This course is a must for emergency services personnel and Rapid Intervention Team (RIT) members in particular. PEERS utilizes equipment carried by the firefighter and addresses structural anchor point attachments and "pseudo" anchor point attachments comprised of Halligan bars, pike poles, axes, etc.. Students will be familiarized with the PEERS equipment, practice tying off to the bombproof and "pseudo" anchors and then practice window bailouts under both normal conditions and limited visibility conditions. Students will train safely but realistically.

Awareness

TRAINING SERVICES

Rope Rescue Specialty Courses

Students are expected to have good basic rope skills prior to attending a PEERS course. All students will need to supply their own helmet, turnout coat, turnout pants, turnout boots, gloves and protective eye wear. Students will also need to provide their own complete working Self Contained Breathing Apparatus (SCBA) and mask. SCBA cylinders must have current hydrostatic test stamp/sticker.

It is taught with effective hands-on training and requires 2 days (16 hours).

Customized and Modular Courses for Rope Rescue Call us for information about modular courses that will enhance your team function, prepare your team for the challenges of rope rescue operations or push your team development to the next level!

Call us for specifics on any of the following courses: Course Module Description

Duration

Type

Emergency shoring operations

3 days (24 hours)

Hands on

Rigging, lifting and moving operations

2 days (16 hours)

Hands on

1 day (10 hours)

Hands on

2 days (16 hours)

Hands on

Breaching and breaking Confined space medical operations, technical rescue medic/physician

Confined Space Rescue Capabilities Whether you're just starting in confined space operations or you are an experienced team, Spec Rescue offers the most comprehensive source of confined space training in the world. We have modeled all of our courses to assure they meet or exceed the following national standards: • NFPA 1670 Standard - Technical Rescue Training and Operations • NFPA 1006 Standard - Professional Competency for Rescue Technician • OSHA 29 CFR 1910.146 - Permit Required Confined Spaces for General Industry • CAL OSHA Standards • AFOSH Standards • Canadian Standards Board • Ontario Safety Health Association - 1990 part c0.1 • Ontario Regulation 851 Industrial Establishment • Ontario Regulation 213/91 Construction Projects We offer a variety of customized municipal and industrial courses to meet your needs. We understand that training needs differ from organization to organization and that your ability to train depends on schedule, budget and personnel availability. We also realize that undertaking confined space training is a big investment of time and money. For that reason we have created a program that allows you flexibility in your training opportunities and options. We can provide either standard specific training or a customized curriculum to meet your needs.

6

102

specrescue.com

800.948.9433

757-468-4513

TRAINING

Awareness

Confined Space Awareness This entry-level course is a must for all responders who may find themselves responding to confined space incidents.

Personnel operating at this level will be able to perform certain "non-entry" rescue procedures and manage the scene appropriately.

At the completion of the course the student will understand the OSHA requirements and risk management principles.

In addition, students will be able to recognize confined spaces and perform a size up of existing and potential conditions. A focus on non-entry rescue techniques will include identification, assessment and procedures for assisting victims. Process and scene coordination will teach students how to implement the emergency response system for confined space emergencies, and to utilize site control and scene management fundamentals.

TRAINING SERVICES

Confined Space Training for Emergency Response Personnel

It is taught through a combination of classroom lecture style, including case studies and group work and requires 1 day (8 hours).

Operations

Confined Space Operations This course is designed for personnel who will respond to and perform limited entry and rescue operations or support technician level personnel during confined space entry and rescue operations. At the completion of this course, the student shall learn how to protect himself or herself, his or her team and victims from the hazards within a confined space. The student will learn how to recognize and size up spaces and manage incidents appropriately, using the guidelines defined by NFPA and OSHA. Areas of focus will include environmental considerations, structural concerns, personal protective gear required and safety. Additional topics include victim transport and procedures for using ropes in a high angle environment It is taught through a combination of lectures, hands-on activities, case studies and group work and requires 3 days (24 hours) and a student to instructor ratio of 12:1 with a minimum of two instructors.

Technician

Confined Space Technician This is the most advanced level of training as outlined in the NFPA 1670 and 1006 standards. This course is designed for organizations and personnel responsible for confined space entry and rescue operations in a more complex environment. Personnel at this level will learn how to manage high risk, high profile confined space rescue operations, including management of local, regional and federal rescue teams, size-up and operational strategy for confined space rescue. This is an advanced level course for the serious rescuer, operating at an expert technician level.

It is taught through a combination of lectures, hands-on activities, case studies and group work and requires 2 days (16 hours) and a student to instructor ratio of 12:1 with a minimum of two instructors.

Industrial Confined Space Programs We understand that industrial response brigades have different needs and requirements than municipal response organizations. We encourage NFPA compliant courses but understand that NFPA compliance may not be important to industrial teams choosing instead to just meet the requirements under OSHA 29 CFR 1910.146 and other applicable standards.

Awareness

Industrial Confined Space Awareness Designed to meet the needs of industry and address the applicable portions of the OSHA 29 CFR 1910.146 standard.

Personnel completing this course shall understand the scope and application of the standard, including recognition of permit and non-permit required confined spaces in the environment and an understanding of the potential hazards associated with these sites. The course also includes discussion of entry permits, hot work permits, and MSDS as well as the duties of supervising employees and local or regional rescue services.

It is taught through a combination of classroom style lecture including real life case studies and instructor experiences and requires 6 hours.

Industrial Confined Space Entry and Operations This course includes the above listed awareness program and expands upon atmospheric monitoring skills and selfrescue techniques. OSHA 1910.146 Permit Required Confined Space, OSHA 1910.147 Lockout-Tagout and OSHA 757-468-4513

specrescue.com

7

ISO 9001:2008 CERTIFIED | ADSINC.COM

103

TRAINING

Products from this manufacturer are available from ADS through GSA.

TRAINING SERVICES

1910.134 Respiratory Protection are key elements of this program. Retrieval and rescue systems are introduced as a part of this unique course

Operations

This course requires 2 days (16 hours) and a student to instructor ratio of 10:1 with a minimum of two instructors.

Industrial Confined Space Rescue Operations This course focuses on operational rescue skills designed to meet all of the requirements of OSHA 1910.146 with special emphasis of Subpart k of the standard. Entry and rescue operations, monitoring, retrieval, PPE and rescue systems are all stressed as part of this unique course. Actual entry into representative spaces during practical exercises is a large portion of this program.

It is taught through a combination of numerous hands-on activities, case studies and teamwork evolutions and requires 2 days (16 hours) and a student to instructor ratio of 10:1 with a minimum of two instructors.

Please note that this course requires 3 days (24 hours) if the prerequisite Industrial Confined Space Awareness certification is not met prior to course delivery.

Technician

Industrial Confined Space Technician This course focuses on taking your team to a higher level of proficiency and stresses complex entry and below grade operations. High-level patient movement and packaging operations are introduced. Advanced monitoring and detection and team functions are stressed.

It is taught through a combination of numerous hands-on activities, case studies and group work and requires 2 days (16 hours) and a student to instructor ratio of 10:1 with a minimum of two instructors.

Specialty

Customized Industrial Confined Space Programs Call us for information about modular courses that will enhance your team function, prepare your team for the challenges of confined space operations or push your team development to the next level!

We recommend these additional courses to further enhance Confined Space readiness: • Industrial Rope Rescue Operations I, II, III • Advanced atmospheric monitoring and detection • Team efficiency concepts

Trench Training Capabilities Training Services for Trench, Excavation & Other Below Grade Operations Whether you are just starting in Trench Rescue or you are a member of an experienced team, Spec Rescue offers a comprehensive source for training to meet your needs. As professional rescuers ourselves, we know that national guidelines and standards are important to you. We have modeled all of our courses to assure they meet the following national standards: -

NFPA 1670 Technical Rescue Training and Operations NFPA 1006 Professional Competencies for Technical Rescue OSHA Trench and Excavation Safety Canadian Standards Board

We understand that training needs differ from organization to organization and that your ability to train depends on schedule, budget and personnel availability. We also realize that undertaking trench training is a big investment of time and money. For that reason we have created a program that allows you flexibility in your training opportunities and options. Classes can be custom designed to emphasize your areas of specific need, to maintain regulatory compliance and to enhance proficiency.

Trench Rescue for Emergency Personnel The complete Awareness through Technician level Spec Rescue trench rescue program is designed to take a novice rescuer through the contextual training necessary to accomplish even the most difficult of rescues. This will require the student to become familiar with the terminology, concepts and rescue methods associated with trench and below grade operations and allow them to have a good working knowledge of the tools, appliances, and skills used in below grade rescue operations. Challenge yourself to complete the best trench training program in the world!

104

8

800.948.9433

specrescue.com

757-468-4513

TRAINING

Industrial Trench Rescue

Trench Rescue for Emergency Personnel A three-module series, designed to take students in a logical progression from general awareness to technician level skills.

Awareness

Trench Rescue Awareness

TRAINING SERVICES

We understand that construction companies, municipal services and industrial personnel have different needs and requirements. For that reason we have developed a variety of general worker and supervisor programs.

As an introductory general awareness course, personnel operating at this level will be able to perform size up and control hazards at a trench emergency.

At the completion of this course, students shall be able to recognize the general hazards associated with trench and excavation emergencies and procedures necessary to mitigate these hazards. They will learn how to identify the resources necessary to conduct safe, effective trench and excavation emergency operations, as well as how to develop and implement procedures to activate the emergency response system and manage the site. Additional topics include typical trench and excavation collapse patterns, secondary collapse conditions, hazards of shifting soil and procedures for rapid, non-entry extrication.

It is taught through a combination of classroom style lecture including real life case studies and instructor experiences and requires 4 hours.

Trench Rescue Operations Operations

This course is designed for personnel who will respond to and perform limited entry and rescue operations and rescue operations in support of technician level personnel.

Working in straight wall trenches, single wall collapses and in heavy lifting environments (excavators, backhoes, pipe, etc.) each student shall be capable of developing procedures to make entry into the trench or excavation rescue areas and how to recognize unstable areas, as well as probable victim locations and survivability. Students will learn how to perform procedures for making the rescue area safe including approved engineering practices and knowledge of soil types, ventilation and other unique hazards. Specific techniques will be covered including bell-bottom excavation, usage of ground pads, use of a RIT team and procedures for using benching and sloping systems. Rescue procedures discussed include assessing mechanisms of entrapment and methods of victim removal.

It is taught through a combination of many hands-on activities, case studies and group work and requires 3 days (24 hours) and a student to instructor ratio of 12:1 with a minimum of two instructors.

Technician

Trench Rescue Technician* The most advanced level of training outlined in the NFPA 1670 and 1006 standards. This course is designed for personnel responsible for rescue and recovery operations in more complex environments. At this level personnel shall identify and understand the limitations and removal of manufactured protective systems, as well as learn procedures for monitoring the atmosphere in all parts of the trench. Additional topics include the limitations of supplemental sheeting and shoring systems; procedures for adjustment of protective systems based on environmental conditions; dewatering, rigging and placement of isolation systems.

Many hands-on activities, case studies and group work. PPE and other specialty equipment may be required. Course requires 2 days (20 hours) and student to instructor ratio of 12:1 with a minimum of two instructors. *Note: if Operations and Technician classes are taken in sequence, then add 1 day for Operations review prior to Technician class

Trench Rescue for Industrial Applications

Specialty

We understand that construction companies, municipal services and industrial personnel have different needs and requirements. For that reason we have developed a variety of general worker and supervisor programs.

General Worker Awareness This course is designed to provide personnel who work in and around trenches, excavations or construction sites an awareness of the dangers associated with unprotected trenches and excavations. Students shall also be able to understand the scope and application of OSHA CFR 29 1910.126.

757-468-4513

specrescue.com

9

ISO 9001:2008 CERTIFIED | ADSINC.COM

105

TRAINING

Products from this manufacturer are available from ADS through GSA.

TRAINING SERVICES

Specialty

At the completion of the course, students will be able to recognize the dangers of an unprotected trench or excavation, identify on site hazards and risks and understand the role of the competent person, other teams, equipment and protective systems. Additional discussions will include the employer's risk management plan and how to implement an emergency response system in case of emergency.

It is taught through a combination of classroom style lecture including real life case studies and instructor experiences and requires 4 hours.

Competent Person Training

Specialty

This course is designed to meet the OSHA 1910.126 standard and its implementation for the official role of "Competent Person." This course is designed for supervisors or site foremen who supervise trench and excavation sites. At the completion of this course the student shall be trained to act as a site safety officer at the work site, and will have the skills to manage trench operations, understand specific environmental factors and select approved protective systems.

This course requires the student to have successfully completed the General Worker Awareness program.

It is taught through a combination of classroom style lecture following all guidelines of OSHA requirements and requires 4 hours.

Customized Industrial Programs Call us for information about modular courses that will enhance your team function, prepare your employees for the challenges of trench rescue or meet specific state or industry requirements.

Vehicle & Machinery Rescue The Spec Rescue Vehicle & Machinery Rescue program meets the NFPA 1670 and 1006 Standards.

Vehicle & Machinery Rescue Awareness Awareness

Awareness level personnel shall meet all requirements specified in Chapter 2 of NFPA 472, Standard for Professional Competence of Responders to Hazardous Materials Incidents. Awareness level functions at vehicle and/or machinery rescue incidents include procedures to conduct a size-up of conditions, identification of the resources necessary to conduct safe and effective operations, implementing the emergency response system site control and scene management, recognition of general hazards associated with vehicle and/or machinery rescue incidents and procedures for the initiation of traffic control.

It is taught through a combination of lecture, hands-on activities and group work and requires 2 days (16 hours).

Vehicle & Machinery Rescue Operations

Operations

Operations level personnel shall meet all requirements specified in Chapter 3 of NFPA 472, Standard for Professional Competence of Responders to Hazardous Materials Incidents and be capable of hazard recognition, equipment use and techniques necessary to operate safely and effectively at incidents involving persons injured or trapped in a vehicle or machinery. Operations level functions at vehicle and/or machinery rescue incidents include procedures to identify probable victim locations and survivability, making the rescue area safe, including the stabilization and isolation (i.e., lockout/tag out) of all vehicles and/or machinery.

Additional environmental skills will teach students how to identify, contain and stop fuel release as well as mitigation and management of general and specific hazards (fire, explosion, etc.) associated with vehicles. Rescue techniques include accessing victims trapped in a vehicle or machinery, protection of a victim during extrication disentanglement, packaging of a victim prior to extrication/disentanglement and performing extrication operations through the use of hand tools It is taught through a combination of numerous hands-on activities, case studies and group work and requires 2 days (16 hours) and a student to instructor ratio of 10:1 with a minimum of two instructors.

Specialty

Vehicle & Machinery Customized Courses

10

106

Call us for information about modular courses that will enhance your team function, prepare your team for the challenges of vehicle and machinery rescue operations or push your team development to the next level!

Customized courses require 5 days (40 hours). specrescue.com

800.948.9433

757-468-4513

TRAINING

Structural Collapse Training

Structural Collapse Awareness

Awareness

The awareness level of training on Structural Collapse, delivered by experienced FEMA rescue professionals, that meets and exceeds the requirements of the NFPA 1670 Standard.

TRAINING SERVICES

Spec Rescue offers the most comprehensive source of structural collapse training anywhere in the world. We understand that structural collapse training is a big investment of time and money and have created a program that allows you flexibility in your training strategy. As professional rescuers, we know that national guidelines and standards are important to the safety of our nation. Our Structural Collapse Programs are ODP/DHS grant approved.

At the conclusion of this course, students will understand the general hazards associated with structural collapse incidents including the recognition of applicable construction types and categories and the expected behaviors of components and materials in a structural collapse. They will be able to recognize and assess potential conditions at a structural collapse incident, as well as identify the resources necessary to conduct safe and effective structural collapse search and rescue operations. They will learn procedures for conducting visual and verbal searches at structural collapse incidents, including the FEMA Task Force Rescue Marking System, Building Marking System, Victim Marking System and Structure Marking System. Students will also discuss development and implementation of procedures for carrying out the emergency response system as well as site control and scene management. An overview of removal of readily accessible victims from structural collapse incidents will be included, as well as a pre view of skills learned in the operations level courses.

It is taught in a classroom lecture style, including case studies and group work and requires 1 day (8 hours) and class size is limited to 120 students.

Structural Collapse Operations

Operations

The operations level of training including discussions of physical structures and advanced rescue skills that meets and exceeds the requirements of the NFPA 1670 Standard.

This course meets all NFPA 1670 guidelines and enables rescue teams to operate safely and effectively in structural collapse incidents involving the collapse or failure of light-frame, ordinary construction, reinforced and non-reinforced masonry construction. At the conclusion of this course, the student will understand the procedures for recognizing unique collapse or failure hazards and for stabilizing and shoring up the structure. An increased emphasis on rescue will include search and rescue techniques intended to locate victims trapped inside and beneath collapse debris; discussions about procedures for accessing victims trapped inside and beneath collapse debris; procedures relevant to extrication operations involving packaging, treating and removing victims trapped within and beneath collapse debris.

It is taught through a combination of lectures, hands-on activities, case studies and group work and requires 5 days (50 hours) and a student to instructor ratio of 8:1 with a minimum of two instructors.

Technician

Structural Collapse Technician This high level technician course meets and exceeds the NFPA 1670 and 1006 standards and is based on the exact course outline of the FEMA US&R course taught to the national task forces. This course fully addresses CBRNE-specific training, and Spec Rescue is a FEMSA certified provider, eligible for funding through ODP programs. This is the course for the serious rescue technician.

At the conclusion of this course the student shall be capable of hazard recognition, equipment use and techniques necessary to operate safely and effectively at structural collapse incidents involving the collapse or failure of concrete tiltup, reinforced concrete and steel construction. The student will learn the process for search operations intended to locate victims trapped inside and beneath collapse debris as well as procedures for accessing and extricating victims trapped beneath collapse debris.

It is taught through a combination of hands-on activities, field work, lectures, case studies and group work and requires 8 days (80 hours) and a student to instructor ratio of 8:1 with a minimum of two instructors.

Structural Collapse Specialty & Custom Courses As professional trainers and members of the fire service, we know that it is not always possible to commit consecutive days to training.

We also realize that your organization might need specific skills to round out your capabilities. For that reason Spec Rescue offers the modular approach to structural collapse.

757-468-4513

specrescue.com

11

ISO 9001:2008 CERTIFIED | ADSINC.COM

107

TRAINING

Products from this manufacturer are available from ADS through GSA.

TRAINING SERVICES

Water Rescue Water Rescue Awareness Awareness

Covering the standards set forth in NFPA 1670, the awareness level is designed for all personnel involved in calls around moving water involving a single victim and dealing with the four phases of major flood events, debris flows or other water related natural disasters. Not only does the class include lectures on such subjects as hazard assessment, size-up and utilization of IMS at water calls but also a series of table tops, videos of actual incidents and practical exercises in applicable rope systems.

This course requires 1 day (6 hours) and a student to instructor ratio of 8:1.

NOTE: This course is a prerequisite for all other Water- and Boat-based classes.

Operations

Water Rescue Operations Based on the NFPA 1670 standard, the operations level builds upon the previous day to include practical skills checkoffs. Students are required to bring personal water rescue equipment for hands-on evolutions.

This course requires 2 days (16 hours) and a student to instructor ratio of 8:1.

Water Rescue Technician Technician

Based on the NFPA 1670 standard, the technician level includes a demonstration of swimming proficiency from each student, rope rescue skills demonstration station and a written test of awareness level material. The remainder of the class time will include all the in-water, boat and rope skills required for NFPA 1006. The last afternoon of class finishes with a six station practical test. NOTE: If Water Rescue Awareness, Operations and Technician are taken consecutively, all three classes can be taught in 40 hours.

This course requires 3 days (24 hours) and a student to instructor ratio of 8:1.

Note: If Water Rescue Awareness, Operations and Technician are taken consecutively, all three classes can be taken in 40 hours�

Watercraft Awareness and Operations for Public Safety Personnel

Specialty

This course is designed to lead public safety personnel through awareness and operations level training involving rescue techniques and small boat handling specific to the AHJ. The training is designed for inexperienced personnel and tailored to the watercraft available to the jurisdiction (i.e.: aluminum craft, inflatable or rigid hull inflatable generally under 18 ft.). Skills taught include addressing personal safety and self-rescue techniques including a demonstration of swimming and treading water proficiency, proper sizing and use of various PFDs, discussions of working knowledge of hydraulics and water dynamics, patient packaging systems and hands-on skills training on boat handling techniques.

Upon completion of this course, the student will have the basic knowledge and skills necessary to operate the AHJs watercraft safely and proficiently when responding to emergencies for their agencies.

It is taught through a combination of hands-on training and group and individual work and requires 1 day (8 hours) and a student to instructor ratio of 8:1.

Personal Watercraft Awareness and Operations for Public Safety Personnel This course is designed for inexperienced public safety personnel in the operations of personal watercrafts (PWCs).

It provides the necessary information to familiarize the students with basic features and concepts of using PWCs for water rescue. The purpose and objectives include a working knowledge of safety and swim proficiency, some instructional knowledge of water dynamics and hydrology, open water rescue techniques and equipment, safe boating practice, patient packaging and pre and operational hands-on techniques for the actual operations of the PWCs and their integrated rescue applications. Upon completion of this course, the student will have basic knowledge and skills to operate a PWC safely and proficiently when responding to emergencies for their agencies.

It is taught through a combination of hands-on training and group and individual work and requires 1 day (8 hours) and a student to instructor ratio of 8:1.

108

800.948.9433 12

specrescue.com

757-468-4513

TRAINING

Motor Sports Rescue

Designed for Emergency Services Personnel who are involved or have the potential to become involved in a racing event, this course is always customized to the specific environment and team. We can include hands-on practical activities using actual race cars (show cars) and assorted training props (such as a roll cage assembly) to enhance participation. Program length can be adapted to accommodate your training needs and schedule.

TRAINING SERVICES

Firefighting in the Fast Lane: Rescue Techniques for Motor Sports Accident Care Teams

Specialty

With the formation of an NFPA Automobile Race Tracks Committee, interest has become focused on this area of emergency services delivery. Since there are literally hundreds of motor sports tracks across the country, odds are you and your department are either directly involved in this fast paced environment or have the potential for involvement through mutual aid. Each track is unique in layout, type of racing vehicles, emergency services provisions, and overall event management. Some sanctioning bodies have touring emergency services providers; most tracks have arrangements with local agencies.

Whether paid staff or dedicated volunteers, all emergency service providers need to review their basic fire and EMS training and understand the unique challenges of the racing environment. For example, due to the special construction of racing vehicles, the old tried and true vehicle extrication techniques not only will not work, they may cause injury or death of the rescuers. Patient care and extrication from these vehicles must be accomplished quickly and efficiently, but the custom-fitted seats, restraint devices and interior bracing designed to keep the driver safely inside the vehicle allow no room for rescuers to maneuver. In the race track environment, where situations occur at a fast pace, there are many opportunities for emergency responders to become victims.

GOALS OF THIS PROGRAM - Promote safety of motor sports emergency teams, track support personnel, drivers, pit crews, officials and spectators at motor sports racing events through effective hands-on training programs.

- Recognition and identification of the hazards associated with motor sports events. Minimizing and/or eliminating those hazards in a safe and expedient manner.

- Develop and enhance the knowledge, skills and abilities of the motor sports workers to safely react and mitigate the emergency incident while reducing and/or preventing injury, loss of life and property.

- Recognition that being a fire and rescue provider requires us to operate in a different environment where the operational rules have changed.

The length of this specialty course can be suited to fit your training needs and schedule.

Specialty Firefighting Courses Many Spec Rescue trainers have come from firefighting backgrounds. These technician level experts have real experience fighting fires in all kinds of environments: marine vessels, aircraft, urban locations, forest and wildfires and many other unique situations. These instructors follow the NFPA and OSHA guidelines, adding real-life case studies, tips and anecdotes for a complete view of the essential skills required for today’s advanced firefighters.

Shipboard Firefighting A fire aboard a marine vessel is life threatening and requires specific skills and training to manage. Spec Rescue provides training for these incidents on a variety of levels. These courses are always customized to the environment and can be designed to address specific local, regional or national requirements. Please contact us for more information about our shipboard firefighting instructors and training capabilities.

Awareness

Shipboard Firefighting Level I This course requires mainly classroom time and the ability to gain access to local port facilities to conduct vessel tours.

At the completion of this course, students will have understanding of the role of local, state and federal agencies, their own duties and responsibilities and the maritime Incident Response Team Concept. Specific topics include vessel construction, vessel hazards, the incident command system, marine fire fighting tactics, tug and barge operations, pleasure boat and marina fires, and vessel tours.

It is taught via classroom lecture and requires 1 day (8 hours).

757-468-4513

specrescue.com

13

ISO 9001:2008 CERTIFIED | ADSINC.COM

109

TRAINING

Products from this manufacturer are available from ADS through GSA.

This course includes the above listed topics for awareness level, but also includes practical exercises aboard a vessel including fire response and mitigation aboard a vessel.

Operations

TRAINING SERVICES

Shipboard Firefighting Level II

These high level courses are customized for organizations and will require access to a vessel, fire department apparatus, personnel protective equipment and access to communication with local, regional and national agencies.

These courses will require advance instructor travel and meetings to develop and arrange for all resources necessary to conduct the evolution. We will work with organizations to develop a course that meets and exceeds local standards and requirements.

It is taught through a combination of numerous hands-on activities, case studies and group work and requires 3 days (24 hours) and a student to instructor ratio of 15:1.

Please note that PPE and other specialty equipment are required.

Specialty

Shipboard Firefighting Level III Additional high-level courses can be customized for organizations and will require cooperation and communication with local, regional and national agencies. These courses will require advance instructor travel and meetings to develop and arrange for all resources necessary to conduct the training. We will work with organizations to develop a course that meets all goals.

The presentation of this course as well as the length will be determined by the organization and instructors.

Aircraft Rescue and Firefighting Spec Rescue will work with you to design the ultimate aircraft firefighting curriculum for your team.

Advanced Aircraft Firefighting Standards and Requirements: Federal Aviation Requirement Part 139, National Fire Protection Agency 7, Department of Defense Instruction 6055.6, Department of Defense 6055.6M. This course was developed in compliance with NFPA 1003.

Specialty

This course is designed to provide emergency personnel who are primarily responsible for Airport/Aircraft Fire Protection and Rescue with a basic understanding of how to safely handle aircraft incidents and emergencies.

Students will receive classroom instruction plus extensive field training. Topics include airport familiarization, fire behavior, safety, aircraft identification (civilian & military, fixed & rotary wing), fuel and hydraulic systems identification and operations, fire alarm and communications, mass casualty and basic tactics.

This course is offered with or without the live fire evolution. This final day meets the regulations of the FAA Part 139 for live fire training for aircraft rescue and firefighting personnel. Students will be provided with simulated interior and exterior firefighting opportunities as well as fuel spill scenarios. This class is for indexed on non-indexed airports.

This course is taught through a combination of numerous hands-on activities, case studies and group work and requires 5 days (40 hours).

Please note that PPE and other specialty equipment may be required.

Customized Aircraft Firefighting Courses Additional Subjects can be custom tailored for your organization as they pertain to your organization's needs and area of responsibility. Other subjects include ARFF Driver/Operator, Officer, Aircraft Incident Management for Structural Departments/Fire Brigades; Airport Incident Command; Managing Mass Casualties; Hazardous Materials for Aircraft Emergencies, Confined Space Entry and Rescue for Aircraft Emergencies and structural fire fighters response for airport incidents.

14

110

specrescue.com

800.948.9433

757-468-4513

TRAINING

Saving Our Own - Firefighter Down Programs

Firefighter Down

Mayday Firefighter Down This essential course will provide information and skills necessary to initiate effective rescue missions involving "trapped" or "lost" members of a fire ground team. Case studies, skill training, and personnel accountability systems are presented in a team development atmosphere with the goal of having students become valuable and effective members of a rescue team should the need arise.

TRAINING SERVICES

Fire ground operations always have the potential to entrap, engulf, or overcome emergency responders. The Firefighter Down program is required for personnel who may face a catastrophic fire ground event.

This program requires students to have a basic knowledge of fire ground operations and proficiency in the use of a Self Contained Breathing Apparatus (SCBA). Full turn out gear is required, to include a SCBA w/spare air bottle and Personal Alarm System (PAS) device. This is a very intensive program and requires a high degree of physical fitness.

It is taught through a combination of numerous hands-on activities, case studies and group work and requires 2 days (16 hours) and a student to instructor ratio of 10:1.

Please note that PPE and other specialty equipment are required.

Rapid Intervention

Rapid Intervention Team Training (RIT) Rapid Intervention Teams provide dedicated rescue personnel to the Incident Commander (IC) in the event of a rescue in an immediately dangerous to life and health (IDLH) environment. The IC evaluates each incident based upon a risk/benefit analysis and assembles a Rapid Intervention Team (RIT) as needed.

The RIT's sole purpose is to locate and rescue trapped or missing firefighters. This course focuses on development and implementation of a RIT for all hazards that the fire service may encounter.

This course includes both classroom and practical evolutions. At the conclusion of this course, students shall be able to develop a written RIT policy to supplement their current incident command policy, perform practical RIT operations, understand or use thermal imaging equipment in support of RIT and perform extraction of injured or trapped firefighters from below grade and above grade areas.

This course requires 1 day (8 hours) and student to instructor ratio of 10:1.

Military and Law Enforcement Special Operations Programs We provide a wide range of training to military and law enforcement special operations teams and SWAT/Special Response Teams. Because of security agreements, we are unable to describe in-depth what the course curriculum entails. Listed below are the programs most sought after and taught.

Specialty

Precious Cargo Program (PC) (SOC)

This course is designed for the team that may have a need to move precious cargo including personnel, equipment, shapes or other items in all terrain environments.This course requires 5 days of hands-on training and classroom lecture.

Tactical Operations in a Contaminated Environment

This course is designed for tactical and special operations teams who may be required to perform reconnaissance, surveillance or CQB in a chemically contaminated environment. It includes applications of PPE, decontamination, tactical and strategic considerations, CQB operations and firearms applications in chemical protective clothing and much more. This course requires 5 Days of intensive hands-on training and classroom lecture.

Custom Lectures for Conferences and Meetings

Call us about lectures, keynotes or other programs specifically designed for conferences and teaching seminars. We have provided these worldwide to conferences and areas such as: FDIC • EMS Today • ICHIEFS and ICHIEFS EMS • HAZMAT Conferences • CODE • Waterborne Terrorism Conferences • State Instructor Conferences • State EMS and Fire Conferences • Fisher Scientific Sales Meetings • California State Fire Instructors • Colorado State Fire Instructors 757-468-4513

specrescue.com

15

ISO 9001:2008 CERTIFIED | ADSINC.COM

111

TRAINING

Helicopter Operations The Spec Rescue Helicopter Rescue Program is designed to take a novice rescuer through the contextual training necessary to accomplish even the most difficult rescues. This will require the student to become familiar with the terminology, concepts and rescue methods associated with helicopters and to have a good working knowledge of the tools, appliances and skills used in such operations.

Helicopter Safety, Rigging and Rappelling Awareness

TRAINING SERVICES

Products from this manufacturer are available from ADS through GSA.

This course focuses on basic helicopter safety and operations in using the helicopter as a personnel delivery platform.

Safety in and around helicopters is discussed including working in and around the aircraft, crew safety and survival, pilot crew interface and in-flight emergencies. Flight crew skid loading and unloading, rigging specific helicopters for rappel and actual rappel operations using drop and leg bags are performed.

It is taught through a combination of numerous hands-on activities, case studies and group work and requires 2 days (16-20 hours) and a student to instructor ratio of 8:1.

Operations

Short Haul Operations This course focuses on the safety and application of helicopters for short haul operations. Originally developed from the military SPIE system and adopted for civilian usage, this course provides the necessary knowledge, skills and abilities to rig and use the helicopter for short haul systems, moving patients and flight crew in stokes, short lines or other patient packaging devices and is ideal for both ground- and water-based operations.

Pre-requisite: Helicopter Safety, Rigging and Rappelling It is taught through a combination of numerous hands-on activities, case studies and group work and requires 2 days (16-20 hours) and a student to instructor ratio of 8:1.

Operations

Water Operations This course is designed for personnel who might have the opportunity to use helicopters in water rescue or cast and retrieve operations in rivers, lakes, oceans or other bodies of water. This course focuses on surface swimmer casting and retrieval, short haul operations and using the helicopter as a rescue platform for patient removal.

It is taught through a combination of numerous hands-on activities, case studies and group work and requires 2 days (16-20 hours) and a student to instructor ratio of 8:1.

Fast Rope

Fast Rope Operations This course is designed for tactical or law enforcement agencies that find the need to insert tactical teams in a rapid manner from a helicopter. Classroom and didactic material focus on use and applications of fast rope operations.

Follow up field operations involve using simulated helicopter and real aircraft for the deployment of teams in a rapid manner.

It is taught through a combination of numerous hands-on activities, case studies and group work and requires 2 days (16-20 hours) and a student to instructor ratio of 8:1.

Rappel

Rappel Master Training This course focuses on training rappel masters to coordinate crew operations and rigging. Command and control of the flight crew, techniques for placing crews outside of the aircraft and communications with the aircraft commander (pilot) are stressed.

Prerequisites: Helicopter Rigging and Rappelling, Short Haul Operations It is taught through a combination of numerous hands-on activities, case studies and group work and requires 2 days (16-20 hours) and a student to instructor ratio of 8:1.

112

800.948.9433 20 specrescue.com

757-468-4513

TRAINING

Hazardous Materials

Awareness

HAZMAT Incident Awareness This course is designed to meet the criteria set forth in the OSHA 29 CFR1910.120 standard. The course goals are designed to give the student the ability to recognize chemical hazards in the workplace and react properly in the event of an emergency. Students will study chemical and physical properties, hazard classes, general safety, product identification and protective actions.

TRAINING SERVICES

Hazardous materials classes are designed to comply with NFPA 472, OSHA 29 CFR 1910.120 and all other OSHA requirements.

It is taught via a classroom style lecture including real life case studies and instructor experiences and requires 1 day (8 hours)

Operations

Industrial HAZMAT Operations This course is designed to meet the criteria set forth in the OSHA 29 CFR1910.120 paragraph q standard and all NFPA 472 competencies for operations level employees. The course goals are designed to give the student the ability to safely respond to a spill or release of a hazardous material using defensive measures. Students will receive training equivalent to the awareness level plus training in the following: hazard and risk assessment, personal protective equipment, control, containment and confinement techniques, basic decontamination and incident operations within an Incident Command System.

It is taught through a combination of numerous hands-on activities, case studies and group work and requires 2 days (16 hours) and a student to instructor ratio of 10:1.

Technician

Hazardous Waste Operator Emergency Response (HAZWOPER) This course is designed to meet the criteria set forth in the OSHA 29 CFR1910.120 standard for technician level employees. The course goals are designed to give the student the ability to safely respond to a spill or release of a hazardous material using both offensive and defensive techniques.

Students will receive training equivalent to the operations level plus training in the following: implementing emergency response plans, using field survey equipment, Incident Command, selection and use of personal protective equipment, advanced leak and spill control, technical decontamination and termination procedures.

This course is appropriate for general site workers and those employees who will be responding to on-site hazardous materials emergencies and implementing the parts of the spill control program that require offensive operations.

It is taught through a combination of numerous hands-on activities, case studies and group work and requires 5 days (40 hours) and a student to instructor ratio of 10:1.

Please note that PPE and other specialty equipment may be required.

Hazardous Materials Emergency Response Team Training

Specialty

This course is designed to prepare personnel to serve on either a municipal or industrial Hazardous Materials Response Team at the technician level (dependent on locality having jurisdiction). This course meets all training requirements of the OSHA 29 CFR1910.120 paragraph q standard and all NFPA 472 competencies for technician level responders.

Students will become familiar with the basic aspects of chemistry, research, risk assessment, site safety planning and action planning. They will become familiar with detection and monitoring procedures utilizing a broad range of equipment and techniques.

Students will demonstrate the ability to select and use a variety of personal protective equipment up to and including "level A" vapor tight suits. Each student will learn the procedures for emergency and technical decontamination. The class offers instruction in advanced tactical control techniques, while utilizing an incident command system. Student safety is stressed during all practical exercises.

Pre-requisite: Hazardous Material Operations Level It is taught through a combination of numerous hands-on activities, case studies and group work and requires 10 days (80 hours) and a student to instructor ratio of 10:1.

Please note that PPE and other specialty equipment may be required.

757-468-4513

specrescue.com

21

ISO 9001:2008 CERTIFIED | ADSINC.COM

113

TRAINING TRAINING SERVICES

Products from this manufacturer are available from ADS through GSA.

Weapons of Mass Destruction and Terrorism Programs WMD Engine Company Operations This course is designed to prepare engine company personnel to respond safely during the initial stages of a WMD event. The student will become familiar with the history of terrorism, chemical and physical hazards associated with WMDs (chemical, biological, and nuclear) and the appropriate public response to changing threat levels. In addition, the course will cover appropriate initial actions, personal protective equipment, emergency and mass decontamination, resource management and integration of state and federal assets.

Operations

It is taught via classroom style lecture including real life case studies and instructor experiences and requires 1 day (8 hours) based on resources and instructor needs.

WMD Incident Command This course is designed to prepare incident commanders and company officers to respond effectively to WMD events involving chemical, biological, and nuclear weapons. Discussions will include: preparedness, training, SOP/SOG development, operating capabilities of outside agencies, media issues, resource acquisition and management, personal protective equipment, logistics, security issues, site safety and action planning.

This course is primarily designed to address the needs of fire service personnel, emergency medical services providers and hazardous materials responders, all trained to at least the operations level of hazardous materials response. Due to the broad scope of the subject matter, the course can be used to address the needs of those without prior hazardous materials training and provide benefits to law enforcement personnel, emergency communications personnel, emergency management personnel, public works management, public health workers, armed forces and disaster response agencies.

It is taught via classroom style lecture including real life case studies and instructor experiences and requires 1 day (8 hours) and is limited to 30 students.

Domestic Terrorism Programs Emergency Response to Bomb Threats

Specialty

Anyone who deals with the business customer has the potential to be the receiver of a terrorist threat in corporate America. Due to the broad scope of the subject matter, this course can be used to address the training needs of those without prior training or experience in the area of terrorist activities. Trained employees will be able to provide valuable information to the supervisory staff as well as those public service agencies responding to your incident.

This course is designed to explore a wide variety of issues and concerns regarding bomb threats and explosive devices. Bombings and the threat of being bombed are harsh realities in today's modern world. Lectures and handson instruction are presented as to how and why businesses are threatened in today's world. In addition, this course delivers a step-by-step process for the employees to follow in dealing with this ever-increasing incident. Emphasis is placed on employee safety with consideration of impacting corporate business loss due to down time. This course identifies methods of dealing with different types of threats.

At the completion of this course, the student will be able to discuss and develop a strategy for dealing with terrorism in their workplace including identifying and appropriate security precautions, working with authorities, managing leadership and control issues to the final steps of incident termination issues and restoration of normal business activities.

This course requires 1 day (8 hours).

Specialty

Historical Perspectives in Understanding Terrorism

22

114

800.948.9433

Perhaps the greatest mistake made by governments, responders and others is underestimating the role that history, culture, religion and tribal relationships have in the current terrorist dilemma. This program examines past and present history to explore the real aspects behind terrorism and what is required to combat it today and beyond. In this program we examine: • • • • • •

Historical aspects of terrorism Islamic religion and its roots How the United States created the current terrorist movement and let it out of the bottle Funding Specific terrorist groups like HMU, IMU, Al Qaeda and others Suicide bombers and the cultural and educational system

specrescue.com

757-468-4513

Globalism, education and fiscal impacts on Central Asia and Africa Saudi oil, money and its connections to the U.S. political structure Warfare as it applies to the 21st century and a terrorist threat Responder-based approaches that work

This course requires 1 day (4-8 hours).

Threats against Areas of Public Assembly: Terrorism Awareness If you work, manage, own or provide security for any area of public gathering, you are already aware of the common problems that occur with large crowds. Additionally, you know what the financial impact can be when a disruption occurs during key events or key times of the year. In this ever-changing environment, it is critical that you provide the necessary education, detection and understanding for the potential of terrorist attacks on areas of mass gathering.

TRAINING SERVICES

Specialty

TRAINING

• • • •

Specialty

While law enforcement monitors those who may have the motive and ability, there are times when criminal or political elements are successful in delivering on their threat. Employees are often the first to recognize or discover something "out of place" in the work environment. Recognition of a viable threat is an essential step in minimizing the potential damage that an incident might cause. The simple act of taking a phone call, recognizing the threat and managing it properly can save millions of dollars in lost time or income and eliminate the potential for public relations problems.

Employee awareness is designed for managers, security personnel and employees. It is geared toward awareness and recognition. This course provides specific information about terrorism, threat recognition, chemical and biological threats and explosive threats. Finally, it is designed to provide you with a method to plan and respond before, during and after an event.

This course requires 1 day (8 hours).

Basic Terrorism Concepts for First Responders

(National Fire

Academy)

This course will explore a wide variety of issues and concerns faced by responders when operating at a potential terrorism incident. This course addresses the special requirements of those incidents with a special emphasis on selfprotection for first responders. Terrorist incidents involving biological, nuclear, incendiary, chemical, or explosive (BNICE) materials are considered technologically hazardous incidents by nature. For this reason, this course is approached from the point of view of a hazardous materials incident with additional complicating factors. This allows us to build upon the proven structure of hazardous materials response in order to address terrorist incidents. At the completion of this course, you will be able to define and discuss terrorism including identifying significant incidents that have occurred within the United States, recognize circumstances and on-scene key indicators which may signify a suspicious incident, define scene security considerations, make appropriate notifications, describe defensive considerations and discuss termination issues associated with terrorism incidents.

This course requires 2 days (16 hours).

Management and Leadership Programs Buddy to Boss -- Effective Fire Service Leadership

Specialty

If you have read the book, you will love the class! It does not matter if you have 25 years on the job or are just striving to get promoted; this is a must-have program! Taught over three days, Buddy to Boss is a leadership program that touches on real world issues that impact leaders every single day. Two and three day leadership programs that touch on real world issues that impact leaders every single day. Leadership is about understanding yourself and the people you work with; it's about coming to work every day and being an every day leader. Management is the application of tools that you need as a leader to survive and thrive every day you lead. Included in this program are the DiSC personality profile, lively discussion and feedback sessions and discussions involving the following items.

• • • • • • • • • • • • • • •

Knowing yourself -- the DiSC personality profile The Governance model Establishing organizational time functions Extinguishing old concepts Keeping humanity in your leadership Principles of leadership, the universal three and the ABC's Maintaining technical competence Keeping the kittens in the box Policy and enforcement Evaluations and human resources -- documenting fringe employees Diversity and managing the fire house Sexual harassment Violence in the workplace Accountability and responsibility for the team Running the business of the business

757-468-4513

specrescue.com

23

ISO 9001:2008 CERTIFIED | ADSINC.COM

115

TRAINING

Products from this manufacturer are available from ADS through GSA.

TRAINING SERVICES

• • • •

Transitional team management -- team life cycles Team decision making Battlefield fire and rescue operations The first steps in a long journey, changing your personal culture

Specialty

Chief, What Your Members Want from You When you are the captain of the ship, you can bet you will get the blame for everything that goes on and a little praise when things go wrong. You cannot lead at the top without being connected to the bottom. This program examines what senior executives and chiefs need to get back in touch with when it comes to leading. People are like ropes: you cannot push them, you have to pull them! Recognizing what is important to the human machine we work with and understanding the influence, commitment and connection required to lead the fire service in the 21st century are skills that create managers rather than leaders. Understanding your people, both good and bad, is a critical to your success. This program examines • • • • • • • •

Knowing yourself Human issues and keeping in touch Training Rules of the game Discipline Accountability and responsibility The role of mission and values in service delivery Education and leadership training

This course is 1 day (8 hours).

Specialty

Why Leadership Fails Leadership is a value, much like family values that are passed on from generation to generation. Pass on the wrong values and you establish a dysfunctional organization (family) that consumes itself with poor decision making, favoritism, poor direction and other dysfunctional characteristics of organizations gone wrong. Let us examine what we can do to short circuit poor leadership and establish a functional base where leaders can grow and prosper.

This course is 1/2 day (4 hours).

DHS/ODP FEMA Specialty Programs All of Spec Rescue's US&R programs are taught by FEMA certified instructors and in many cases, represent the same instructional staff used to train the Federal Task Forces. Our customers have numerous questions regarding the use of ODP funds for US&R Training.

We assisted in providing ODP and DHS with guidelines for developing requirements and have provided grant-based training to Florida, Oregon, Connecticut, New Jersey, and Michigan. ODP grant guidelines state the following: Urban Areas shall conduct search and rescue training in compliance with NFPA 1670 and 1006. Only Urban Search and Rescue courses approved by FEMA and delivered using FEMA-certified providers are eligible for use of ODP funds.

The training must not supplant existing resources, but rather build additional training capabilities above and beyond those that currently exist. Any additional capabilities pursued through these training opportunities must meet a specific need identified through the homeland security assessment process and must comport with the State or Urban Area Homeland Strategy.

If the basic foundational US&R courses fully addresses the fire service or hazardous materials sections included in the ODP Emergency Responder Guidelines, and the ODP Homeland Security Guidelines for Prevention and Deterrence, no additional CBRNE-specific training is necessary for eligibility purposes. However if the foundational US&R course does not fully address these guidelines then the student must complete a follow-on CBRNE awareness training within a reasonable timeframe in order for the US&R course to be considered an allowable use of ODP funds.

These US&R courses are intended to build critical capacity at the state and local levels. The execution of this training is the stated capacity-building context is unrelated to designation of national US&R teams. Therefore, states with UASI jurisdictions may not request such designation based upon training.

Specialty

Please note that the hours for the courses in this section are mandatory, but we offer each course with 8 hour days or 10 hour days to suit your needs.

24

116

800.948.9433

US&R Task Force Leaders Course This program prepares your Task Force leaders to understand how the system works, its concept of operations and how to fulfill their roles during all aspects of the systems engagement including administrative, deployment, operations, specrescue.com

757-468-4513

TRAINING

This course requires 40 hours and a student to instructor ratio of 20:1.

Specialty

US&R Planning Officer and Technical Information Specialist This combined program provides the necessary training for your plans officers and your technical information specialist. It focuses on effective planning processes, development of an incident action plan and provides training for your plans officer on their responsibilities during US&R operations and administrative times. This program also provides training for the technical information specialist on capturing and developing deployment information as it becomes available, photography, report development and integration of information into the planning process.

TRAINING SERVICES

political interaction, disengagement and return to readiness. This course is targeted to senior leadership responsible for leading and managing task force functions when not deployed.

Specialty

This course requires 40 hours and a student to instructor ratio of 10:1.

US&R Safety Officer This program is designed to provide your US&R safety officer the tools they need to function at the scene of a complicated collapse and WMD incident. It provides the administrative, deployment, operational and demobilization aspects of safety, integration with medical, planning and task force leadership.

This course requires 32 hours and a student to instructor ratio of 20:1.

Specialty

US&R Logistics Specialist This program is designed to train logistics personnel to effectively manage, deploy, maintain and manage your US&R cache. Additionally, it prepares them for deployment, field operations, disengagement and return to readiness as any Task Force operating at the national level would do. Personnel receive intensive training and will be qualified to manage all hazardous materials and prepare and certify cargo for shipping on aircraft and ground.

Requirements – US&R equipment cache, access to aircraft This course requires 40 hours and a student to instructor ratio of 10:1.

Specialty

US&R Technical Search Specialist This program provides all of the necessary knowledge, skills and abilities for your technical search personnel to develop strategies and tactics to implement searches during recon and operations at structural collapse operations.

It provides the necessary instruction on use, care, maintenance and tactical applications of all search tools carried in the cache and provides information on how technical search integrates into the overall operation Requirements – US&R Technical Search Cache and work site This course requires 40-45 hours and a student to instructor ratio of 6:1.

Specialty

US&R Medical Specialist This program is designed for physicians and paramedics associated with the Task Force. It is designed to provide medical personnel with the necessary KSA’s to operate during all aspects of the mission. It addresses team health and safety, medical cache, confined space medicine, BOO coordination, treatment protocols, and all aspects associated with the medical and health care aspects of the mission.

Requirements – US&R Medical Cache and work site This course requires 40 hours and a student to instructor ratio of 8:1.

Specialty

US&R Heavy Rigging Designed to teach advanced rigging and crane skills as well as heavy equipment applications, this course is designed for your US&R heavy rigging staff and rescue specialist. An in depth look at rigging, cranes, engineering and other aspects of successfully moving and securing debris at collapsed sites.

Requirements – Cranes and work site This course requires 24 hours and a student to instructor ratio of 6:1.

757-468-4513

specrescue.com

25

ISO 9001:2008 CERTIFIED | ADSINC.COM

117

TRAINING

Products from this manufacturer are available from ADS through GSA.

TRAINING SERVICES

Specialty

US&R Communications Specialist This program is designed to provide the necessary knowledge, skills and abilities for US&R communications specialists. It includes working with and deploying all equipment in the US&R communications cache including radios, repeaters, satellite phone systems, BOO operations, liaison operations, radio frequency applications and planning. .

Requirements – US&R Communications Cache This course requires 48 hours and a student to instructor ratio of 8:1.

US&R Structural Collapse Technician

Specialty

This high level technician course meets and exceeds the NFPA 1670 and 1006 standards and is based on the exact course outline of the FEMA US&R course taught to the national Task Forces. This course fully addresses CBRNEspecific training, and Spec Rescue is a FEMSA certified provider, eligible for funding through ODP programs. This is the course for the serious rescue technician.

At the conclusion of this course, the student shall be capable of hazard recognition, equipment use, and techniques necessary to operate safely and effectively at structural collapse incidents involving the collapse or failure of concrete tilt-up, reinforced concrete, and steel construction. The student will learn the process for search operations intended to locate victims trapped inside and beneath collapse debris as well as procedures for accessing and extricating victims trapped beneath collapse debris.

It is taught through a combination of hands-on activities, field work, lectures, case studies and group work and requires 8 days (80 hours) and a student to instructor ratio of 8:1.

US&R K-9 Search Specialist Course Specialty

This program is designed to provide handlers and K-9s with the necessary baseline skills to train for work in the US&R environment. It includes working with the handler and K-9 in US&R terrain, basic command functions, search tactics, fundamental K-9 skills and prepares the handler and K-9 for the requirements associated with a Type I and Type II test.

This program does not certify handlers or K-9s as Type 1 or Type II. Requirements – US&R worksite and K-9 obstacle course This course requires 40 hours and a student to instructor ratio of 5:1.

Organizational and Operational Risk Management Risk Management 101 Specialty

This is an efficient, one hour "crash course" in risk management designed for command officers, line officers and personnel and incident safety officers.

It is designed to provide a fundamental understanding of risk management and to provide an overview of risk management from a safety and survival aspect. At the completion of this course, students will have an understanding of the following topics: Define Risk Management, Classic Risk Management Model, Operational Risk Management, SOPs, Training, Equipment, Incident Scene Actions, Survivability, and Systems Approach (all inclusive).

It includes and expert one-hour overview of vital considerations in organizational risk management strategy.

This powerful and realistic course is frequently delivered at conferences and corporate training events.

Department of Defense (DoD) Independent Risk Analysis and Management Specialty

Designed for DoD Installation Fire Chief's independent evaluation of their facilities efficiency, effectiveness and combat readiness using developed DoD and NFPA guidelines, procedures, checklists and criteria.

26

118

This course is structured to create a realistic environment for evaluation while ensuring safety is not compromised by exercises designed to meet the full range of taskings of the organization. Evaluations are conducted to assess areas mandated by law as well as mission statements identified by major command leadership as critical to assess and assure the health and performance of the organizations.

Experienced past and present installation chiefs from all branches of the uniformed services conduct the evaluations over 5 days to include familiarity with the evaluations, the exercises and evaluations and compilation of data and outbriefs to staff.

specrescue.com

800.948.9433

757-468-4513

TRAINING

This class will provide course instruction on the organizational (theory) and operational (practical) applications of risk management. The course can be provided in segments of 1? hours, 4 hours or 8 hours. The focus will be safety and health components of risk management. This course will include risk management issues for all emergency service personnel as well as providing an understanding of organizational and operational risk management for a fire department, industrial fire brigade, or other emergency services organizations.

This process will also include how to develop a written risk management plan based upon the requirements of the NFPA 1500 standard for a Fire Department Occupational Safety and Health Program. The risk management plan will have a positive effect on the organization based upon the financial, liability, safety, and health components of risk management. Operationally, this process will discuss the variety of services that are provided by the emergency services organization and how to develop effective risk management strategies and tactics.

TRAINING SERVICES

Specialty

Organizational and Operational Risk Management

Incident Command Programs Introduction to the Incident Command System / Incident Management System: Managing Emergency Operations using ICS/ICM

Specialty

The Incident Command System (ICS) and a recent variation, the Incident Management System (IMS) are designed to provide a common operating system that can be used for managing any type of incident. ICS is by far the most universally used and accepted of the two.

ICS is a management system based on several important philosophies. One is that the incident commander (IC) should manage the system and let the system manage the incident. Secondly, the most qualified people, not necessarily the highest-ranking people, should fill each position. The third is "Management by Objective." While these philosophies are not new and may be forgotten or ignored in day to day operations, they become of extreme importance in large or complex incidents or events.

Any size emergency operation, whether it is a single car accident or a major natural disaster, can be managed under the ICS system. The system is just as easily adapted to non-emergency events such as a major public event or a VIP visit to an industrial facility. Federal agencies such as the National Park Service, the National Forest Service, and others use ICS for all such operations. Many state and local governments, volunteer organizations and private sector businesses have adopted ICS as their operating system of choice. Probably the most important reason to use ICS is the ability of the system to accommodate and use multiple resources from multiple agencies in an effective and efficient organization. Multi-agency and multi-jurisdictional event are the most troublesome to manage. The ICS system, if used properly, does this flawlessly.

Spec Rescue offers ICS training at any level and for any organization, public or private. Courses range from a 4 hour orientation to a full, 40 hour operational course. Each can be tailored to meet the needs of the business and industry, government and military agencies, and volunteer organizations. The types of incidents that can be addressed include fires, HAZMAT incidents, aircraft crashes, technical rescue, search and rescue, law enforcement incidents, natural disasters, and other emergency as well as non-emergency events.

Specialty

Structural Collapse IMS The goal of this course is to provide fire officers with an understanding of the command operations at a structural collapse incident. Upon completion of this course, students will have an understanding of The Incident Command System Organizational Structure, Response Resource Capabilities, Scene Management: Factors and Issues, Response Functions, Structural Collapse: Operational Phases As a fire officer, it is important for you to gain basic knowledge of factors involved in incidents of this type. It is possible for all of us to be involved in such an incident during our careers. This course should leave you with an appreciation for incident complexity and the knowledge that successful conclusion of incidents of this type depends on strong command skills and effective incident management.

It is taught through a combination of numerous hands-on activities, case studies and group work and requires 1-2 days (12 hours) and is held at the National Fire Academy.

757-468-4513

specrescue.com

27

ISO 9001:2008 CERTIFIED | ADSINC.COM

119

TRAINING

Products from this manufacturer are available from ADS through GSA.

TRAINING SERVICES

Hospital Based Programs Awareness

Hospital First Receivers Awareness Level This program is designed for hospital employees who may be in a position to identify the arrival of unannounced victims from an incident involving the release of a hazardous substance. Students will learn procedures for proper notification, safe distance practices and how to limit contamination of the hospital facility.

This course is designed for hospital employees who, during the course of daily duties, may be presented with a contaminated person.

The course requires 1/2 day (4 hours) with an unlimited attendance level.

Operations

Hospital First Receivers Operations Level This program is designed to meet the OSHA Best Practices for Hospital-Based First Receivers of Victims from Mass Casualty Incidents Involving the Release of Hazardous Substances. The student will become familiar with emergency preparedness, hazard communications, respiratory protection, chemical protective equipment and decontamination procedures. Practical evolutions will be conducted during this program utilizing the hospital's equipment to allow students to experience hands-on training in equipment use.

This course is designed for hospital employees who will perform decontamination for the hospital as well as any employee who will be operating in protective equipment outside during the receiving of patients.

The course requires 1 day (8 hours) and a student to instructor ratio of 10:1.

Operations

Hospital Hazmat Operations This program is designed to meet the OSHA and NFPA standards for First Responder Operations Level. The topics covered include respiratory protection, chemical PPE, decontamination and defensive control techniques. Classroom lectures mixed with practical evolutions will ensure the student's ability to respond to an internal or external event. This class is ideal for hospital facilities who do not meet the requirements for the OSHA First Receivers.

This course requires 3 days (24 hours) and a student to instructor ratio of 10:1.

Specialty

Hospital Incident Command System (HICS) This program is designed to build upon the IS 100, 200, 700 and 800 classes and integrate National Incident Management System (NIMS) into the hospital environment. Class time will also be spent outlining the 17 elements of NIMS compliancy as well as steps to create an emergency management committee. Time will be allocated for practical demonstration and operation of the HICS as well as the supporting forms and documentation.

Prerequisites: IS 100, 200, 700, and 800.

This course is two varieties: • 1 Day (8 hours): Includes the above description. • 2 Day (16 hours): Includes a 1 day review of all prerequisite courses as well as the above description.

Annual Refresher Training

Specialty

This course is designed to meet the criteria for annual refresher training. Previous training topics are reviewed as well as the presentation of current information and new technology along with its application in the hospital environment.

Students must have previously attended an awareness or operations level class in order to be eligible for refresher training. It is taught through a combination of classroom lecture and hands-on evolutions designed to help keep the student's training up-to-date and requires a student to instructor ratio of 10:1.

Fire Protection Inspections for Hospital Certifications (JACHO) This course is designed for third party inspections of hospitals seeking accreditation through Joint Commission for the Accreditation of Hospital Organizations (JACHO). For those organizations seeking to comply, services address specific criteria such as a review of management plans, statement of conditions (SOC) which includes basic building information (BBI) and the plan for improvement (PFI). Additional services may include inspection of fire walls and fire doors to ensure compliance with required standards and other criteria within the SOC. The criteria and processes used for fire drill compliance can also be reviewed.

Spec Rescue's personnel are all experienced administrators and staff with industrial and seasoned knowledge of the hospital's position and responsibilities related to the JACHO standards.

28

120

800.948.9433

specrescue.com

757-468-4513

INDEX

Portable Breathing Air Dive Compressor, 67 TCOM-25H Trailer Mounted Breathing Air Compressor System, 68 UNICUS III Breathing Air Cylinder Recharging System, 68

3M Respiratory, 71

A

BENCHMADE Breaching Tools, 81

# - BU

3M™ Particulate Respirator 9210, N95, 71 3M™ Particulate Respirator 9211, N95, 71 FR-7800B Full Facepiece, 71 FR-M40B Full Facepiece, 71 RBE-NM10 Hood Powered Air Purifying Respirator (PAPR) System, 71

Tomahawk, 81

Rescue Hooks, 92 7 Hook, 92 8 Hook, 92 9 Hook, 92

BOOTS, 48

AMEREX Extinguishing Systems, 24 ABC Dry Chemical, 24 Halon Wheeled Fire Extinguisher, 24 Purple K Dry Chemical, 24

ANGUS FIRE Hoses, 27 Firepower™ II, 27 Hi-Combat II™, 27

ARI HETRA MRO Vehicle Lifts, 91 Heavy-Duty Mobile Lift System, 91 Hybrid Mobile Lift System, 91

ARFF Fire Fighting Boots, 48 Leather/Fabric Fire Fighting Boot, 48 PRO Model 5050 Strux’im•i•ty™, 48 Rubber Fire Fighting Boot, 48

BREACHING TOOLS, 74 Baby Enforcer Door Ram, 74 Broco Door Blower, 76 Buster Tool, 80 CF-3 Hydraulic Spreader, 77 Cutting Rods and Rapidfire Cutting Rod Igniters, 74 Diamond Ripper™ Diamond Rescue Blade, 75 EH5 Blade, 79 Enforcer Door Ram, 74 HellBoy Exothermic Cutting Torch Handle, 79 Hooligan, 80 K750 Cut Off Saw, 78 K950 Chain Saw, 78 K950 Ring Saw, 78 K960 Rescue Saw, 78 Light US&R Rescue Strut System, 81 Maxiforce®, 81 MINI-TAC Exothermic Breaching Torch Set (Thermal Breaching), 75 Mini Torch Assembly, 79 MOLLE Platform Backpack System for Broco Torch, 75 NXS Blade, 79 PRT, 80 Pry-Axe, 80 RapidFire Cutting Rod Igniters, 74 Rescue/Recovery Portable Exothermic Torch Set, 75 Rhino Security Screen Door Puller, 76 ‘SAS’ Door Breaker, 77 Tomahawk, 81 Vehicle Stabilization Kits, 81

ASI Positive Pressure Ventilation, 31 Fire/ Rescue Portable Ventilators and Fans, 31

SCBA Accessories, 65 First Responder Trailer, 65 Modular Aluminum Scba Cylinder Storage Racks, 66 Multi-Air Command Kit, 66 Multi-Pak™ Rescue Air Cart, 66 Technical Rescue Bottled Air Cart, 66

AVON PROTECTION Respiratory, 72 C50, 72 FM53, 72 NH15, 72

BROCO Breaching Tools, 74 Baby Enforcer Door Ram, 74 Broco Door Blower, 76 CF-3 Hydraulic Spreader, 77 Cutting Rods And Rapidfire Cutting Rod Igniters, 74 Diamond Ripper™ Diamond Rescue Blade, 75 Enforcer Door Ram, 74 MINI-TAC Exothermic Breaching Torch Set (Thermal Breaching), 75 MOLLE Platform Backpack System for Broco Torch, 75 RapidFire Cutting Rod Igniters, 74 Rescue/Recovery Portable Exothermic Torch Set, 75 Rhino Security Screen Door Puller, 76 ‘SAS’ Door Breaker, 77

SCBA, 61 ST53, 61 ST53SD, 61 ST-PAPR, 61

B

BAUER COMPRESSORS Compressors, 67 C-D/DV/Navy Shipboard System Portable Breathing Air Dive Compressor, 67 C-D/DV/Navy/SS Marinized Shipboard System

BULLARD Helmets, 50 Ax Arff Series Firedome® Helmet (Fx), 51 FXA1 Firedome Helmet NFPA 1971, 2007/US Navy, 50 TrakLite™ Integrated Lighting, 50 USRX Urban Search and Rescue Helmet NFPA 1951-2007 and NFPA 1971, 2007, 51 UST Traditional Series NFPA 1971, 2007, 50

Thermal Imaging, 93 Eclipse: Personal-Issue Thermal Imaging, 93 T3MAX™ – Economic Versatility, 93 T4MAX, 94 T320™ – Ultimate Versatility, 93

ISO 9001:2008 CERTIFIED | ADSINC.COM

121

INDEX CA - HO

C

F DRAGER Detection, 19

CAIRNS Helmets, 53 Cairns 360R Rescue Helmet, 53 Cairns 660C Metro Composite Fire Helmet, 53 Cairns® Classic 1000, 53 Cairns Commando HP3, 53 Cairns N5A New Yorker Leather Helmet, 53

CASES, 14 0500 Transport Case, 15 1120 Case, 14 1440 Top Loader Case, 14 1510 Carry on Case, 14 1610 Case, 14 1650 Case, 14 1690 Transport Case, 15 Cube Cases, 14 Medchest 7, 15 Medchest 8 Drawer, 15 Multi Laptop Case, 15

Bio-Agent Test Kits, 19 Draeger Colormetric Tubes, 19 N95, 19 Parat C, 19

SCBA, 63 PSS7000, 63 SCBA-G, 63

Thermal Imaging, 95 Thermal Imaging Camera (TIC), 95

DUPONT Protection, 21 Certified to NFPA 1991 & 2001 Edition, 22 Certified to NFPA 1992, 70E Cat 2, 22 Certified to NFPA 1994 2007 Edition Class 2, 22 DuPont™ Tychem® CPF 3 HD, 21 DuPont™ Tychem® F, 21

Foam Training, 98 C-D/DV/Navy Shipboard System Portable Breathing Air Dive Compressor, 67 C-D/DV/Navy/SS Marinized Shipboard System Portable Breathing Air Dive Compressor, 67 TCOM-25H Trailer Mounted Breathing Air Compressor System, 68 UNICUS III Breathing Air Cylinder Recharging System, 68

CONTAINERS, 16 ALOKSAK Bags, 16 Odor Barrier Bags, 16 Splashsak Dipper, 16 Splashsak Lil’ Dipper, 16 Splashsak Tern, 16

CONTAINMENT, 32

E

ELKHART BRASS Nozzles, 25 Chief™, 25 Phantom®, 25 R.A.M, 25 Select-O-Matic®, 25 Stinger® RF, 25

Fire Fighting products, 32 Secondary Containment Products, 32

ELMRIDGE Respiratory, 70 Fire Escape Hood, 70

CREW BOSS Turnout Gear, 57 Advance™ Brush Pant, 58 Crew Boss™ Brush Shirt, 57 EMS And Fire-Rescue Coat, 57 Interface™ Coat, 57 Interface™ Pant, 58

D DETECTION, 18 Bio-Agent Test Kits, 19 Draeger Colormetric Tubes, 19 Hazmatcad™, 18 Safesite® Multi-Threat Wireless Detection System, 18 Sirius® Multigas Detector, 18 Solaris™ Multigas Detector, 18

DEWALT MRO Power Tools, 88 1/2” 18V Cordless XRP™ Li-Ion Drill/Driver Kit, 89 1/2” 18V Cordless XRP™ Li-Ion High Torque Impact Wrench Kit, 89 10.0 AMP Reciprocating Saw, 88 15 Pc. Bi-Metal Reciprocating Saw Blade Set with Medium Tough Case, 88 18V Cordless Compact Li-Ion Hammerdrill/Impact Combo Kit, 88 18V Cordless XRP™ Li-Ion, 88 Heavy-Duty 18V Compact Cordless, 89

122

800.948.9433

32” ARFF Coat, 58 32” Nomex Bunker Coat, 58 32” Nomex/Kevlar Bunker Coat, 58 ARFF Pant, 58 Rear Bib-Style Pant, 58

Protection, 19

COMBAT SUPPORT PRODUCTS Training Services, 98 COMPRESSORS, 67

FIRE DEX Turnout Gear, 58

EXTINGUISHING SYSTEMS, 24 ABC Dry Chemical, 24 Halon Wheeled Fire Extinguisher, 24 Purple K Dry Chemical, 24

EXTRACTION TOOLS, 82 4035NCT, 82 4150, 82 4240, 82 4321, 84 4331, 84 4340, 84 4350, 84 Battery Operated Combi Tool Deluxe Kit, 85 Core Technology Hoses, 85 Damage Control Kit, 87 DPU30, 83 HCT 3120, 84 Hydraulic Hose, 82 Optional Backpack, 85 Optional Humvee Cord, 85 PU5, 83 PU5 Mini Rescue Tool Pump, 86 SMC 4006, 83 SP10 PC, 83 Tactical Combi Tool, 86 Tactical Ram, 86 Tactical Self Contained Rescue Tool, 85

EYEWEAR, 47 Genesis Combo Pack, 47 Op Drops™, 47 Uvex Stealth Goggle, 47 XC Combo Pack, 47

G GLOVES, 46 Eclipse, 46 Non-Eclipse Elk Models, 46 Non-Eclipse Proximity, 46 Non-Eclispe Cowhide, 46 Non-Eclispe Elk, 46 Structural Fire Fighting Glove, 46

H

HALE Pumps, 28 20FP-C8 Float Pump, 29 20FP-C8FR High Pressure Transportable with Wraparound Frame, 29 20FP-C8P High Pressure Backpack Pump, 28 FP3000DI-T, 29 HP300DK-0 300 GPM Open Cross Chassis Unit, 28 HPT75-YD9 Transportable Pump, 28 HPT200-B18 Transportable Pump, 28 HPT200-YD9 Transportable Pump, 28 HPW200-B18 Transportable with Wraparound Frame, 29

HELMETS, 50 Ax Arff Series Firedome® Helmet (Fx), 51 Cairns 360R Rescue Helmet, 53 Cairns 660C Metro Composite Fire Helmet, 53 Cairns® Classic 1000, 53 Cairns Commando HP3, 53 Cairns N5A New Yorker Leather Helmet, 53 EMS Style Helmets, 52 FXA1 Firedome Helmet NFPA 1971, 2007/US Navy, 50 HDO Ben 2 Plus Modern Style Helmet, 52 HDO Ben 2 Plus Traditional Style Helmet, 52 Lite Force Plus Proximity Style Helmet, 52 USRX Urban Search and Rescue Helmet NFPA 1951-2007 and NFPA 1971, 2007, 51 UST Traditional Series NFPA 1971, 2007, 50 Wildland Helmets, 52

HIPPO MRO Power Units, 90 HIPPO 2032E, 90 HIPPO 2042E, 90 HIPPO Power Track 2022SP, 90

HOLMATRO Extraction Tools, 82 4035NCT, 82 4150, 82 4240, 82 4321, 84 4331, 84 4340, 84 4350, 84 Battery Operated Combi Tool Deluxe Kit, 85 Core Technology Hoses, 85 DPU30, 83

HONEYWELL Boots, 48 ARFF Fire Fighting Boots, 48 Leather/ Fabric Fire Fighting Boot, 48 PRO Model 5050 Strux’im•i•ty™, 48 Rubber Fire Fighting Boot, 48

Gloves, 46 Eclipse, 46 Non-Eclipse Elk Models, 46 Non-Eclipse Proximity, 46 Non-Eclispe Cowhide, 46 Non-Eclispe Elk, 46 Structural Fire Fighting Glove, 46

J JOINT FORCES EXTRICATION KIT, 34

L LOKSAK Containers, 16 ALOKSAK Bags, 16 Odor Barrier Bags, 16 Splashsak Dipper, 16 Splashsak Lil’ Dipper, 16 Splashsak Tern, 16

M MCNETT Eyewear, 47 Op Drops™, 47

MRO POWER TOOLS, 88 1/2” 18V Cordless XRP™ Li-Ion Drill/Driver Kit, 89 1/2” 18V Cordless XRP™ Li-Ion High Torque Impact Wrench Kit, 89 10.0 AMP Reciprocating Saw, 88 15 Pc. Bi-Metal Reciprocating Saw Blade Set with Medium Tough Case, 88 18V Cordless Compact Li-Ion Hammerdrill/Impact Combo Kit, 88 18V Cordless XRP™ Li-Ion, 88 Heavy-Duty 18V Compact Cordless, 89

Helmets, 52 EMS Style Helmets, 52 HDO Ben 2 Plus Modern Style Helmet, 52 HDO Ben 2 Plus Traditional Style Helmet, 52 Lite Force Plus Proximity Style Helmet, 52 Wildland Helmets, 52

MRO POWER UNITS, 90 HIPPO 2032E, 90 HIPPO 2042E, 90 HIPPO Power Track 2022sp, 90

Hoods, 49 Hoods, 49

Turnout Gear, 54 Dyna-Fit Suspender, 55 EMS Jumpsuits, 54 General Purpose/Extrication Jumpsuits, 54 Incident Response Jumpsuit, 55 Proximity, 55 Structural 32Q2, 54 Structural 2412, 54 Structural 3412, 54 Ultramotion® Proximity, 56 UltraMotion® Structural Gear Coat and Pant, 56 Wildland Jumpsuit, 55

MRO VEHICLE LIFTS, 91 Heavy-Duty Mobile Lift System, 91 Hybrid Mobile Lift System, 91

MSA Detection, 18 Hazmatcad™, 18 Safesite® Multi-Threat Wireless Detection System, 18 Sirius® Multigas Detector, 18 Solaris™ Multigas Detector, 18

HOODS, 49 Hoods, 49

HOSES, 27 Firepower™ II, 27 Hi-Combat II™, 27 Hose Carts, 27 Mobile Hose Drier, 27 Tilting Hose Turntable, 27

HO - PA

HCT 3120, 84 Hydraulic Hose, 82 Optional Backpack, 85 Optional Humvee Cord, 85 PU5, 83 PU5 Mini Rescue Tool Pump, 86 SMC 4006, 83 SP10 PC, 83 Tactical Combi Tool, 86 Tactical Ram, 86 Tactical Self Contained Rescue Tool, 85

INDEX

HOLMATRO CONTINUED

Protection, 21 Firehawk™ Air Mask, 21 Millennium CBRN Gas Mask, 21

SCBA, 62 Firehawk M7, 62 Firehawk M7 Responder, 62 Firehawk Rescue Belt, 62

Thermal Imaging, 96 Evolution® 5600 Thermal Imaging Camera, 96 Evolution® 5800 Thermal Imaging Camera, 96

HUSKY Containment, 32 Fire Fighting products, 32 Secondary Containment Products, 32

HUSQVARNA Breaching Tools, 78 EH5 Blade, 79 K750 Cut Off Saw, 78 K950 Chain Saw, 78 K950 Ring Saw, 78 K960 Rescue Saw, 78 NXS Blade, 79 SLC 45 Diamond Chain, 79

N NOZZLES, 25 Chief™, 25 Phantom®, 25 R.A.M, 25 Select-O-Matic®, 25 Stinger® RF, 25 Trident One, 26

P PARATECH Breaching Tools, 80 Buster Tool, 80 Hooligan, 80 Light US&R Rescue Strut System, 81 Maxiforce®, 81

ISO 9001:2008 CERTIFIED | ADSINC.COM

123

INDEX

PARATECH CONTINUED

PA-SC

PELICAN Cases, 14

DuPont™ Tychem® CPF 3 HD, 21 DuPont™ Tychem® F, 21 Firehawk™ Air Mask, 21 Millennium CBRN Gas Mask, 21 N95, 19 Parat C, 19 Trellchem Decon 100, 20 Trellchem EVO (HPS), 20 Trellchem NEO, 20 Trellchem VPS, 20 Trellchem VPS-Flash, 20

PRT, 80 Pry-Axe, 80 Vehicle Stabilization Kits, 81

0500 Transport Case, 15 1120 Case, 14 1440 Top Loader Case, 14 1510 Carry on Case, 14 1610 Case, 14 1650 Case, 14 1690 Transport Case, 15 Cube Cases, 14 Medchest 7, 15 Medchest 8 Drawer, 15 Multi Laptop Case, 15

PUMPS, 28 20FP-C8 Float Pump, 29 20FP-C8FR High Pressure Transportable with Wraparound Frame, 29 20FP-C8P High Pressure Backpack Pump, 28 FP3000DI-T, 29 HP300DK-0 300 GPM Open Cross Chassis Unit, 28 HPT75-YD9 Transportable Pump, 28 HPT200-B18 Transportable Pump, 28 HPT200-YD9 Transportable Pump, 28

Tactical Lighting, 44 1560 Case for 9440 RALS, 44 9430IR Infrared Remote Area Lighting System (RALS), 44 9430 Remote Area Lighting System (RALS), 44 9440 RALS, 44 9470 Remote Area Lighting System (RALS), 44

HPW200-B18 Transportable With Wraparound Frame, 29

R

POSITIVE PRESSURE VENTILATION, 30 18” Positive Pressure Fan With 6.5 Hp Honda Motor, 30 Fire/ Rescue Portable Ventilators and Fans, 31 Fire/Rescue PPV Blowers, 31 P8xe Nano (8 Inch Confined Space With Duct Work), 30 P164 Smoke Ejector, 30 SVU-50, 30 VSX Variable Speed Electric Blower, 31

Hose Carts, 27 Mobile Hose Drier, 27 Tilting Hose Turntable, 27

Turnout Gear, 56 Red Mobile Single Sided, 56

PowerFlare® PF-200, 40 PowerFlare Soft-Pack Kit (6), 40 PowerFlare Soft-Pack Kit (8), 40

POWER HAWK Extraction Tools, 87 Damage Control Kit, 87

PROTECTION, 19 Certified to NFPA 1991 & 2001 Edition, 22 Certified to NFPA 1992, 70E Cat 2, 22 Certified to NFPA 1994 2007 Edition Class 2, 22

124

800.948.9433

SCBA, 60 AIR-PAK® 75™ SCBA, 60 Firehawk M7, 62 Firehawk M7 Responder, 62 Firehawk Rescue Belt, 62 Mobile Air Cart, 60 Posichek3, 64 PSS7000, 63 RIT-PAK III, 61 SCBA-G, 63 SKA-PAK® At Supplied Air Respirator, 60 Sperian® Warrior™, 64 ST53, 61 ST53SD, 61 ST-PAPR, 61 Swatpak, 60 TRC -1 Air Cart, 60

SCBA ACCESSORIES, 65 Epic™ Ri Wireless Communications System, 65 Epic™ Voice Amplifier, 65 First Responder Trailer, 65 Modular Aluminum SCBA Cylinder Storage Racks, 66 Multi-Air Command Kit, 66 Multi-Pak™ Rescue Air Cart, 66 Protégé™ Multi - Gas Personal Gas Monitor, 65 Technical Rescue Bottled Air Cart, 66

READY RACK Hoses, 27

RESCUE HOOKS, 92 POWERFLARE Tactical Beacons, 40

S

7 Hook, 92 8 Hook, 92 9 Hook, 92

RESPIRATORY, 69 3M™ Particulate Respirator 9210, N95, 71 3M™ Particulate Respirator 9211, N95, 71 AV-2000®/AV-3000® facepiece, 69 C50, 72 Fire Escape Hood, 70 FM53, 72 FR-7800B Full Facepiece, 71 FR-M40B Full Facepiece, 71 M110 Dual Lens Full Facepiece, 69 M120 CBRN Facepiece, 69 NH15, 72 Proflow 3 Powered Air-Purifying Respirator, 69 RBE-NM10 Hood Powered Air Purifying Respirator (PAPR) System, 71 Xcel Halfmask, 69

SCOTT HEALTH & SAFETY Respiratory, 69 AV-2000®/AV-3000® Facepiece, 69 M110 Dual Lens Full Facepiece, 69 M120 CBRN Facepiece, 69 Proflow 3 Powered Air-Purifying Respirator, 69 Xcel Halfmask, 69

SCBA, 60 AIR-PAK® 75™ SCBA, 60 Mobile Air Cart, 60 RIT-PAK III, 61 Ska-Pak® At Supplied Air Respirator, 60 Swatpak, 60 TRC -1 Air Cart, 60

SCBA Accessories, 65 Epic™ Ri Wireless Communications System, 65 Epic™ Voice Amplifier, 65 Protégé™ Multi - Gas Personal Gas Monitor, 65

Thermal Imaging, 94 Eagle Imager® 320 Thermal Imaging Camera, 94 Eagle imager® 320 with Pak Tracker™, 94

INDEX

G3 LED Fire Rescue Light, 41 M6® Guardian®, 42

SPEEDS 12S, 38 SPEEDS® 24H, 38 ®

SPERIAN Eyewear, 47 Genesis Combo Pack, 47 Uvex Stealth Goggle, 47 XC Combo Pack, 47

SCBA, 64 Posichek3, 64 Sperian® Warrior™, 64

STREAMLIGHT Tactical Lighting, 42 3AA HAZ-LO®, 43 E-Flood® Firebox®, 43 E-Spot® Firebox®, 43 Fire Vulcan® LED, 43 Helmet Lighting Kit - Div 2 4AA Lux®, 42 Knucklehead®, 43 Litebox®, 43 PolyStinger LED HAZ-LO, 42 PolyTac 90®, 43 Survivor® LED, 43 Vantage® LED, 43

SUPER VAC Positive Pressure Ventilation, 30 18” Positive Pressure Fan With 6.5 Hp Honda Motor, 30 P8xe Nano (8 Inch Confined Space With Duct Work), 30 P164 Smoke Ejector, 30 SVU-50, 30

SUREFIRE Tactical Lighting, 41 G2D LED Multi-Output Fire Rescue Light, 42 G2 LED Fire Rescue Helmet Mount Kit, 42 G2 LED Fire Rescue Light, 41 G3D LED Multi Purpose Fire Rescue Light, 41

T TACOM KIT, 36 US Army Firefighter’s Proximity Ensemble, 37 US Army Firefighter’s Scba Kit, 37 US Army Fire Fighter’s Storage Container, 37 US Army Firefighter’s Structural Ensemble, 37 US Army Firefighter’s Wildland Ensemble, 37 US Army Fire Resistant Camouflage Uniform, 37 US Army Fires Kit, 36

TACTICAL BEACONS, 40 PowerFlare® PF-200, 40 PowerFlare Soft-Pack Kit (6), 40 PowerFlare Soft-Pack Kit (8), 40

TRELLEBORG Protection, 20 Trellchem Decon 100, 20 Trellchem EVO (HPS), 20 Trellchem NEO, 20 Trellchem VPS, 20 Trellchem VPS-Flash, 20

TRIDENT ONE Nozzles, 26 Trident One, 26

TURNOUT GEAR, 54 32” ARFF Coat, 58 32” Nomex Bunker Coat, 58 32” Nomex/Kevlar Bunker Coat, 58 Advance™ Brush Pant, 58 ARFF Pant, 58 Crew Boss™ Brush Shirt, 57 Dyna-Fit Suspender, 55 EMS And Fire-Rescue Coat, 57 EMS Jumpsuits, 54 General Purpose/Extrication Jumpsuits, 54 Incident Response Jumpsuit, 55 Interface™ Coat, 57 Interface™ Pant, 58 Proximity, 55 Rear Bib-Style Pant, 58 Red Mobile Single Sided, 56 Structural 32Q2, 54 Structural 2412, 54 Structural 3412, 54 Ultramotion® Proximity, 56 UltraMotion® Structural Gear Coat and Pant, 56 Wildland Jumpsuit, 55

TACTICAL LIGHTING, 41 3AA HAZ-LO®, 43 1560 Case for 9440 RALS, 44 9430IR Infrared Remote Area Lighting System (RALS), 44 9430 Remote Area Lighting System (RALS), 44 9440 RALS, 44 9470 Remote Area Lighting System (RALS), 44 E-Flood® Firebox®, 43 E-Spot® Firebox®, 43 Fire Vulcan® LED, 43 G2D LED Multi-Output Fire Rescue Light, 42 G2 LED Fire Rescue Helmet Mount Kit, 42 G2 LED Fire Rescue Light, 41 G3D LED Multi Purpose Fire Rescue Light, 41 G3 LED Fire Rescue Light, 41 Helmet Lighting Kit - Div 2 4AA Lux®, 42 Knucklehead®, 43 Litebox®, 43 M6® Guardian®, 42 PolyStinger LED HAZ-LO, 42 PolyTac 90®, 43 Survivor® LED, 43 Vantage® LED, 43

TEMPEST TECHNOLOGY Positive Pressure Ventilation, 31 Fire/Rescue PPV Blowers, 31 VSX Variable Speed Electric Blower, 31

THERMAL IMAGING, 93 Eagle Imager® 320 Thermal Imaging Camera, 94 Eagle imager® 320 with Pak Tracker™, 94 Eclipse: Personal-Issue Thermal Imaging, 93 Evolution® 5600 Thermal Imaging Camera, 96 Evolution® 5800 Thermal Imaging Camera, 96 T3MAX™ – Economic Versatility, 93 T4MAX, 94 T320™ – Ultimate Versatility, 93 Thermal Imaging Camera (TIC), 95

TRAINING SERVICES, 98 Fire Fighting & Emergency Response Training, 98 Foam Training, 98

SP - WI

SPEC RESCUE Training Services, 99 SPEEDS® DECONTAMINATION SYSTEMS, 38

U

UNIVERSITY OF MARYLAND Training Services, 98 Fire Fighting & Emergency Response Training, 98

V VEHICLE EXTRACTION KIT, 35

W

WILCOX Breaching Tools, 79 HellBoy Exothermic Cutting Torch Handle, 79 Mini Torch Assembly, 79

ISO 9001:2008 CERTIFIED | ADSINC.COM

125

NO BURDENS, BARRIERS OR DISTRACTIONS SHOULD HOLD YOU BACK.

Scott Health & Safety is now Scott Safety. It’s an exciting change that reflects our decades-long commitment to the world’s first responders. Because we know that despite the obstacles, they’re expected to get the job done. That’s why we’re driving new performance standards. Innovating for real-world needs. And maintaining close, accountable relationships with first responders the world over. First responders have work to do. Our job is to never stop looking out for them. For a new look at the task ahead, visit SCOTTSAFETY.COM

© 2011 Scott Safety. SCOTT, the SCOTT SAFETY Logo, Scott Health and Safety are registered and/or unregistered marks of Scott Technologies, Inc. or its affiliates.