2014 ECHO Bearcat saleshandbook by Rick Cleghorn

TABLE OF CONTENTS Horsepower Conversion Chart..............................3 Who Uses What.................................................4 Frequently Asked Questions All ECHO Bear Cat Products............................5-9 Product Noise Levels ......................................10 Chipper Commonalities....................................11

STUMP GRINDER Model – SG340...............................................35

CHIPPER/SHREDDERS 2" – Model SC2170.........................................12 3" – Models SC3206, SC3265 SC3305, SC3305E & SC3342....................13-14

DEBRIS LOADERS Models – DL8390, DL10570............................37 Models – DL12653, DL12720..........................38

CHIPPER/SHREDDER/BLOWER 5" – Model SC5720B.......................................15 CHIPPERS 4" – Model CH4400.........................................16 5" – Model CH5653.........................................17 6" – Models CH611DH & CH6730H.............18-19 8" – Turntable Models CH8720iH & CH8993H ..........................20-21 9" – Models CH911DH & CH922DH.............22-23 PTO MACHINES 5" – Model SC5540 - Chipper/Shredder.............24 5" – Model SC5540B Chipper/Shredder/Blower..................................25 4.5" – Model CH45540....................................26 4.5" – Models CH5540H & CH5540.................27 8" – Model CH8540.........................................28 9" – Models CH9540H & CHF9540H...........29-30

WHEELED VACUUMS Models – WV190, WV190S, WV160 & WV160S..........................................36

GEAR ECHO Bear Cat Gear........................................39 WARRANTY / PRODUCT CHARTS WARRANTY U.S. AND CANADA Current Models....................................40-41 Non-Current Models.............................42-43 WARRANTY OUTSIDE U.S. AND CANADA Current Models....................................44-45 Non-Current Models.............................46-47 Belts Reference Guide.....................................48 Rotor, Shredder/Chipper Replacement Kits.........49 Blade Kits Chart.........................................50-51 ACCESSORIES...........................................52-59

SKID STEER CHIPPERS 4.5"- 8" Models CH450H, CH500H & CH800H..............31 LOG SPLITTERS Models – LS22 & LS27....................................32 WHEELED TRIMMERS WT190, WT190T, WT190S..............................33 Accessories.....................................................34

www.bearcatproducts.com

HP to cc CONVERSION CHART

GASOLINE ENGINES cc

Gross HP

Model Number

148

3.5**

2.6

70530*

Vertical

5**

3.7

74050*, 73350*

Vertical-GCV

5**

3.7

75050*, 75350*

Horizontal

170

5.7

4.3

SC2170, LS22

Honda

Vertical-GCV

160

4.4

3.3

WT160S (73455), WT160T (74455), WV160, WV160S

Subaru

Vertical

190

5.5

4.1

WT24, WT24S, WT24T

Briggs & Stratton

Vertical-Intek

190

6**

4.8

WV190* (75060), WV190S* (75360)

Briggs & Stratton

Vertical-Quantum

190

6.5**

4.8

WT190* (75065), WT190T* (76065), WT190S* (75365)

Briggs & Stratton

Vertical/Elec.-Quantum

190

6.5**

4.8

WT190SE (73265)*

Briggs & Stratton

Horizontal

205

5.5**

4.1

SC3206 (70050), SC2206

Subaru

Horizontal

210

5.2

LS27

Honda

Horizontal/Elec.-GX

242

8**

6.0

70385*

Subaru

Horizontal

265

6.7

SC3265

Honda

Horizontal-GX

270

8.5

6.4

SC3270 (70380)*, SC3270T (70580)*

Briggs & Stratton

Horizontal/Elec.

305

8**

6.0

SC3305E (70085)

Briggs & Stratton

Horizontal

305

8**

6.0

SC3305 (70080)

Briggs & Stratton

Horizontal/IC

305

8**

6.0

70180*

Honda

Vertical-GXV

340

8.9

6.6

SG340 (73711), 75011*

Honda

Vertical/Elec.-GXV

340

8.9

6.6

75111*

Briggs & Stratton

Horizontal-Intek

342

11**

8.3

SC3342 (75311)

Honda

Horizontal-GX

390

11.7

8.7

DL8390, CH4390 (73413)*

Subaru

Horizontal

404

10.4

CH4400

Briggs & Stratton

Horizontal Vanguard

570

13.4

DL10570

Honda

Horizontal/Elec.-GX

614

20**

14.9

SC5614 (71020)*, CH6614 (71620)*, CH6614H (72620)*

Subaru

Horizontal/Elec.

653

16.4

CH5653,DL12653

Honda

Horizontal/Elec.-GX

670

24**

17.9

CH6670H (76624)*, CH8670H (76824)*, SC5670 (75524)*, DL12670 (75124)*

Subaru

Horizontal/Elec.

720

18.6

DL12720,SC5720B

Subaru

Horizontal/Elec./Fuel Injected

720

20.9

CH8720iH

Briggs & Stratton

Horizontal/Elec.-Vanguard

993

26.1

CH6993H (76635)*, CH8993H (76835)

Kohler

Horizontal/Elec.

730

18.6

CH6730H

Gross HP

Engine Manufacturer

Engine Type

Briggs & Stratton

Horizontal

Briggs & Stratton Honda Subaru

DIESEL ENGINES Engine Manufacturer

Engine Type

Liters

Model Number

Kubota

1105/Mech.

1.1

18.5

CH611DH (76628)

Kubota

1105/Mech.

Kubota

2203/Mech.

1.1

18.5

CH911DH (72928)

2.2

35.9

CH922DH (74950)

*A non-current ECHO Bear Cat model number **Horsepower rating based on Engine Manufacturer at time of manufacture

888.625.4520

WHO USES WHAT ECHO Bear Cat has a wide range of products to get the job done! Industry

Product

Used for

Industry

Tobacco stalks Ag - Specialty

Cemetery

Chipper/Shredder Animal bedding

Job site clean up

Chipper/Shredder

Job site clean up Create mulch

Wheeled Vacuum

Leaf removal

Debris Loader

Leaf clean up

Chipper/Shredder

Brush and tree pruning

Wheeled Trimmer

Aesthetics

Wheeled Vacuum

Leaf removal

Chipper

Shelter belt clean out

Wheeled Trimmer

Fence line clean up

Debris Loader

Disposal of broken branches and fallen trees

Chipper/Shredder

Dead plant recycling/moisture control

Wheeled Trimmer

Tree plots

Chipper/Shredder

Trail maintenance

Chipper

Property maintenance clean up

Chipper/Shredder Golf Course Wheeled Trimmer

Grass clipping tidy

Chipper/Shredder Wheeled Trimmer

Fence clean up

Wheeled Vacuum

Parking lots and stadium clean up

Debris Loader

Collecting grass clippings and leaf removal

Wheeled Vacuum

Municipalities

Nurseries

Heavy grass and weed cleaning for ponds and creeks Brush/hedge clean up

Wheeled Trimmer

Storm damage Chipper

Create mulch for landscaping

Wheeled Vacuum

Chipper/Shredder

Chipper

Stable clean up

Chipper

Home Owner with Acreage

Used for

Wheeled Vacuum

Farming

Grounds and Maintenance

Landscaper

Product

Wheeled Trimmer

Overpass, road side maintenance

Wheeled Vacuum

City park clean up

Parks and Rec Wheeled Trimmer

Rental

Yard maintenance

Riding trails Leaf removal

Street clean up Leaf pick up

Trail maintenance Fence lines

Wheeled Vacuum

Parking lot clean up

Chipper/Shredder

Compost/home owner clean up

Wheeled Vacuum

Leaf removal

Stump Grinder

Stump removal Refuse reduction

Pruning Fence line

Palm frawn disposal

Tree Service

Chipper

Air quality protection Power line clearing Easements clearing

www.bearcatproducts.com

FAQ CHIPPER/SHREDDERS MODELS: SC2170, SC3206, SC3265, SC3305, SC3305E**, SC3342, SC5540, SC5540B* & SC5720B** What are these machines designed for?

The ECHO Bear Cat chipper/shredders are designed to effectively reduce the volume of wood, leaves and other organic material.

When should I chip?

If you don’t plan on composting the material, material is green and stringy or larger than .75" in diameter.

When should I shred?

If you plan on composting or if the material is smaller than .75", use the shredder. Shredding is also an efficient way to reduce the volume of leaves or prunings.

How long will the chipper blades last?

Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life.

What is the maximum size of material will these machines chip or shred?

ECHO Bear Cat 2" chipper/shredders will chip up to 2" (5cm) and shred up to .75" (2cm) diameter material. ECHO Bear Cat 3" chipper/shredders will chip up to 3" (8cm) and shred up to .75" (2cm) diameter material. ECHO Bear Cat 5" chipper/shredders will chip up to 5" (13cm) and shred up to .75" (2cm) diameter material.

Do not attempt to put material larger than .75" in diameter into the shredder hopper. Doing so may cause machine failure and will void the warranty. *PTO Machines **Electric start models do not include battery.

LOG SPLITTERS MODELS: LS22 & LS27 What is the cycle time? The LS22 has a cycle time of 12 seconds and the LS27 has a cycle time of 14 seconds.

Does my splitter come with hydraulic fluid? The hydraulic system on this log splitter comes filled with high performance Automatic Transmission Fluid (ATF) to accommodate operation in temperatures below 32 degrees F (0 degrees C). When adding or replacing ATF, use a Dexron® III or Mercon® qualified product. Check the fluid on level ground with the jack stand in the down position. DO NOT MIX HYDRAULIC FLUID WITH ATF. THIS MAY DAMAGE THE SYSTEM AND COULD VOID WARRANTY. DO NOT OVERFILL. FILL THE HYDRAULIC FLUID TANK WITH THE RAM RETRACTED.

What size logs can I split?

The maximum length of log that you can split is 24" (60.9cm) long. You can split larger diameter logs with the unit in the vertical position.

How difficult is it to perform maintenance on the machine?

ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.

888.625.4520

FAQ WHEELED TRIMMERS MODELS: WT190, WT190T & WT190S Can I operate the Wheeled Trimmer on a hillside?

The ECHO Bear Cat Wheeled Trimmer is capable of continuous operation on a slope not to exceed 15 degrees. Limited operation on slopes greater than 15 degrees is allowed.

Do the engines have an oil pump?

No. The engines obtain lubrication from a â&#x20AC;&#x153;Splash Lubeâ&#x20AC;? system.

How do I change the trimming line? To wrap the cutting string in the standard configuration, feed the cutting string through the second hole on either end of the trimmer head leaving approximately 8 inches for the cutting surface. Total recommended string length is 20-1/2". Continue by weaving the cutting string through the first hole directly beside the second hole. Loop the cutting string back and feed through the first hole on the opposite end of the trimmer head. Pull the cutting string tight. Feed through the remaining second hole and pull the cutting string tight. The cutting strings in the middle two holes should be the same length. If the length differs, cut to an even length. It may be necessary to remove pieces of broken or worn string before new string can be properly installed.

How many speeds does the Self-Propelled Wheeled Trimmer (WT190S) have and how fast does it go? There are three separate gears on the transmission of the Self-Propelled Wheeled Trimmers, and the speeds range from 1 to 3 mph.

What is the Sabre Tooth Blade and Triple Blade Brush Cutter used for?

The Sabre Tooth Blade (14" dia.) is designed to be used for cutting small trees, saplings, bushes etc. up to 4" in diameter. The Nylon Blade Kit is designed for the heavy grass, weeds and brush growth.

Do the Sabre Tooth blade and Triple Blade Brush Cutter fit all WT190 models? Yes. By removing the mow ball both accessories will work and can be height adjusted to preference.

How difficult is it to perform maintenance on the machine?

ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.

STUMP GRINDER MODEL: SG340

What is the application of the Stump Grinder? The ECHO Bear Cat Stump Grinder is designed with a compact 23" wheel base, enabling it to be used on stumps found in places large stump grinders cannot get to.

How do I engage the Stump Grinder?

Position the stump grinder so the cutter head is adjacent to the stump. Start the stump grinder and hold up the bottom bail so it doesn't shut off. Pull the top bail to the handle and hold it there to activate the left wheel brake, holding it so it does not turn. Gradually, using the locked left tire as a pivot point, slowly pivot the cutter head until the cutting teeth contact the stump. Pivot the stump grinder on the left wheel in a slow, smooth sweeping motion from left to right as the teeth grind the stump. Do not force the cutting teeth. Check position by watching through the screen opening. Grind the stump down to a maximum of 4 inches below ground level.

How difficult is it to perform maintenance on the machine?

ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.

www.bearcatproducts.com

FAQ CHIPPERS MODELS: CH4400, CH45540, CH5653, CH5540, CH5540H, CH611DH, CH6730H, CH8540, CH8993H, CH8720iH, CH9540H, CHF9540H, CH911DH & CH922DH What are these machines designed for? The ECHO Bear Cat chipper is designed to effectively reduce the volume of wood, branches, and other organic material. The typical application for this product group is anywhere from light commercial to municipalities and/or rental.

What types of chippers are available?

ECHO Bear Cat makes chippers with gravity or hydraulic feed, powered by an engine package or a tractor PTO. A hydraulic feed machine has a hydraulic driven feed roller to efficiently feed branches to the chipper rotor.

When should I buy a gravity feed machine?

If you have an infrequent need for a chipper and time is not a factor, a gravity feed machine will fit your needs.

When should I buy a hydraulic feed machine?

If time or efficiency is an issue, a hydraulic feed chipper allows you to be more productive.

What does it mean when you say hydraulic feed chippers feature an "Auto Feed" system? "Auto Feed" refers to the way the system senses if the rotor has slowed down too much for maximum chipping performance. When this

happens, the feed roller stops feeding the material, allowing the engine and rotor RPM to recover. Once the engine and rotor RPM have recovered sufficiently, the feed roller reengages and begins feeding material again. It has also been referred to as the "try again" feature.

How long will the chipper blades last?

How difficult is it to perform maintenance on the machine?

ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.

Will electric start chippers include the starting battery? No. ECHO Bear Cat products are not shipped with a battery and will need to be purchased separately.

POWER TAKE OFF (PTO) MACHINES

MODELS: CH45540, CH5540, CH5540H, SC5540, SC5540B, CH8540, CH9540H & CHF9540H When do I buy a chipper powered by a tractor Power Take Off (PTO) vs. an engine-driven unit? If you own a tractor a PTO chipper is a smart economic choice.

What are the tractor requirements for these chippers and chipper/shredders?

The ECHO Bear Cat 4.5" chipper requires a tractor with PTO hp ranging from 15hp to 28hp. The ECHO Bear Cat 5" chippers and chipper/ shredders require a tractor with PTO hp ranging from 25hp to 45hp. The ECHO Bear Cat 8" and 9" chippers require a tractor with PTO hp ranging from 35hp to 60hp.

Will the chipper fit my tractor?

The ECHO Bear Cat chippers and chipper/shredders are designed to fit all Category 1 three-point hitches. Chipper weight and tractor hp needs to be taken into consideration. All Chipper models fit a Category 1 Quick Hitch.

888.625.4520

FAQ SKID STEER CHIPPERS MODELS: CH450H, CH500H & CH800H What is this machine designed for?

The ECHO Bear Cat chipper is designed to effectively reduce wood, brush, and other organic material while using your skid steer as the power unit.

What is the capacity and hydraulic flow requirements of these machines? The CH450H has a maximum capacity of 4.5" (11cm) and requires at least 11 to 15 GPM (41.6 to 56.8 LPM) on a mini skid steer. The CH500H has a maximum capacity of 5" (13cm) and requires at least 15 to 22 GPM (56.7 to 83.3 LPM) on a low-flow skid steer. The CH800H has a maximum capacity of 8" (20cm) and requires at least 25 to 38 GPM (94.6 to 43.8 LPM) on a hi-flow skid steer.

Will the chipper fit my skid steer?

The ECHO Bear Cat CH500H and CH800H skid steer chippers are equipped with universal attachment ends, capable of hooking up to most skid steers. The CH450H is designed to mount to mini skid steers.

How long will the chipper blades last?

How difficult is it to perform maintenance on the machine?

ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.

WHEELED VACUUMS

MODELS: WV190, WV190S, WV160 & WV160S Where can I use the Wheeled Vacuum? The Wheeled Vacuum is designed to be used for residential, commercial or municipal pickup of leaves, grass or other light debris.

How much reduction of debris will I get?

There is not much reduction; however, by passing through a six-bladed fan into the bag some natural breakage occurs allowing the five-bushel bag to be filled. Reduction through compaction will happen.

Is it hard to push the Wheeled Vacuum on turf? The large wheels have ball bearing hubs that allow easy movement.

How many speeds do the Self-Propelled Wheeled Vacuums have and how fast does it go? There are three separate gears on the transmission of the Self-Propelled Wheeled Vacuum, and the speed range is 1 to 3 mph.

How many height adjustments does the Wheeled Vacuum have? The Wheeled Vacuum can be adjusted into four different nozzle settings ranging from .25" - 4.5" (.64cm-11.4cm) to accommodate all types of terrain.

What do I use the optional 4" (10.1cm) Vacuum Hose Kit for? This hose kit is designed to allow vacuuming hard to reach places.

How difficult is it to perform maintenance on the machine?

ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.

www.bearcatproducts.com

FAQ DEBRIS LOADERS

MODELS: DL8390, DL10570, DL12653 & DL12720 What is the application for the Debris Loader? The Debris Loader is used for commercial or municipal pickup of leaves, grass, or other light debris.

How much reduction of debris will I get? There is very limited reduction of the material due to the design for compaction vs. reduction. The Debris Loader is designed to effectively load leaves, grass, or other light debris from the ground to a vehicle collection bin.

Is there a rental application for this machine? Yes. Commercial landscapers and municipalities will have a seasonal need for this piece of equipment.

How difficult is it to perform maintenance on the machine?

ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.

Will electric start Debris Loaders include the starting battery? No. ECHO Bear Cat products are not shipped with a battery and will need to be purchased separately.

I have a chipper that requires the belt to be engaged. How do I engage and disengage the belt without it squealing and causing damage to the belt or other drive components? ENGAGING THE BELT: 1. AFTER engine is warmed and ready for use, move the throttle control back down to approximately 25% of full throttle. 2. When engine is running at approximately 25% of full throttle, SLOWLY engage belt by using the belt engagement . DO NOT engage the belt with engine running at high RPM. Engaging belt while engine is running at high RPM WILL result in significant belt squealing and possible damage. Engaging belt while engine is running at high RPM may also damage vital drive components of the chipper or chipper/shredder, 3. If the chipper engine stalls while engaging the belt, return the belt engagement back to the START position, restart engine, SLIGHTLY increase throttle and attempt engagement again. 4. Once the belt is engaged, SLOWLY increase throttle to 100% or full throttle. 5. ALWAYS run the machine at 100% or full throttle when chipping or shredding material. ENGINE SHUTDOWN/BELT DISENGAGEMENT: 1. WITH THE BELT STILL ENGAGED, SLOWLY move the throttle to the SLOW position. 2. Allow the engine to run at slow idle for 30-60 seconds. This will slow the rotor down to the same RPM as the engine. 3. Stop the engine by moving the throttle to the STOP position or turning off the ignition switch. 4. Allow rotor to come to a complete stop. 5. Once the engine is off and the rotor has completely stopped, the belt can be disengaged by moving the belt engagement back to the START position. NEVER disengage the belt as part of the stopping or shut down process. The belt should remain engaged during the entire shutdown process. Leaving the belt engaged is a vital part of proper shutdown and ensures the rotor stops spinning in conjunction with the engine shutting off.

888.625.4520

PRODUCT NOISE LEVELS Model

Description

dB (Pressure)

dB (Power Level)

CHIPPER/SHREDDERS SC2170

2" (5cm) Capacity – Subaru SP 170cc

111

SC3206

3" (7.6cm) Capacity – Briggs & Stratton OHV 205cc

111

SC3265

3" (7.6cm) Capacity – Subaru EX 265cc

111

SC3305

3" (7.6cm) Capacity – Briggs & Stratton OHV 305cc

112

SC3305E

3" (7.6cm) Capacity – Briggs & Stratton OHV 305cc, Electric Start

112

SC3342

3" (7.6cm) Capacity – Briggs & Stratton OHV 342cc

114

SC5720B

5" (13cm) Capacity Chipper/Shredder/Blower Subaru 720cc

120

CHIPPER/SHREDDER/BLOWER LOG SPLITTERS LS22

Subaru SP 170cc

N/A

LS27

Subaru SP 210cc

N/A

WT190

Briggs & Stratton Quantum 190cc

101

WT190T

Briggs & Stratton Quantum 190cc

101

WT190S

Briggs & Stratton Quantum 190cc

101

SG340

Honda 340cc

WHEELED TRIMMERS

STUMPGRINDER CHIPPERS CH4400

4.5" (11cm) Subaru EX 404cc

107

CH5653

5" (13cm) Capacity – Subaru EH 653cc

109

CH611DH

6" (15cm) Capacity – Kubota Diesel 1.1 Liter with Hydralic Feed

111

CH6730H

6" (15cm) Capacity – Kohler Command Pro 730cc with Hydraulic feed

117

CH8720iH

8" (20cm) Capacity – Subaru 720cc – Turntable with Hydraulic Feed

114

CH8993H

8" (20cm) Capacity – Briggs & Stratton Vanguard 993cc – Turntable with Hydraulic Feed

114

CH911DH

9" (23cm) Capacity – Kubota 1.1 Liter Diesel with Hydraulic Feed

112

CH922DH

9" (23cm) Capacity – Kubota 2.2 Liter with Hydraulic Feed

112

PTO CHIPPERS AND CHIPPER/SHREDDERS CH45540

4.5" (11cm) Capacity – 540 PTO – 15-28 hp Input Range

87*

107

CH5540

5" (13cm) Capacity – 540 PTO – 25-45 hp Input Range

86*

103

CH5540H

5" (13cm) Capacity – 540 PTO with Hydraulic Feed – 25-45 hp

86*

103

SC5540

5" (13cm) Capacity – 540 PTO – Chipper/Shredder – 25-45 hp Input Range

99*

113

SC5540B

5" (13cm) Capacity – 540 PTO – Chipper/Shredder – PTO - 25-45 hp

99*

113

CH8540

8" (20cm) Capacity – 540 PTO – 35-60 hp Input Range

95*

112

CH9540H

9" (23cm) Capacity – 540 PTO with Hydraulic Feed - 35-60 hp

95*

112

CHF9540H

9" (23cm) Capacity – 540 PTO with Hydraulic Feed - 35-60 hp

95*

112

WV160

160cc Honda OHC

WV160S

160cc Honda OHC - Self-Propelled

WV190

190cc Briggs & Stratton OHV

WV190S

190cc Briggs & Stratton OHV - Self-Propelled

DL8390

Honda GX 390cc – 8" (20.3cm) Intake

116

134

DL10570

Briggs & Stratton Vanguard 570cc – 10" (25.4cm) Intake

120

138

DL12653

Subaru EH 653cc – 12" (30.5cm) Intake

120

DL12720

Subaru EH 720cc – 12" (30.5cm) Intake

122

WHEELED VACUUMS

DEBRIS LOADERS

*based off towable model

These values were obtained using harmonized EN ISO 3744:2010

www.bearcatproducts.com

CHIPPERS CHIPPER COMMONALITIES 14" (35.6cm) rotor weighing 49 lbs. (22.2kg) fully assembled • • • • • • •

1" (2.5cm) thick machine balanced cantilever rotor Models: CH4400, CH45540 & CH450H Standard 4.5" x 9" (11.4cm x 22.9cm) discharge chute. Optional discharge chute is 4.5" (11.4cm) square 13" x 14.5" (33cm x 36.8cm) feed chute Two reversible heat-treated steel chipper blades Four-sided cutter bar/anvil Chipper Blade Kit: P/N: 76295-00

20" (50.8cm) rotor weighing 140 lbs. (63.5kg) fully assembled • • • • • • • •

1.25" (3.2cm) thick machine balanced 4" (10cm) and 5" (13cm) chippers, Models CH5540, CH500H, CH5540H & CH5653 – same chipper body 6" (15cm) discharge chute rotating 360 degrees 5.5" x 7" (14cm x 17.8cm) feed opening Reversible heat-treated steel chipper blades. Four-sided adjustable steel anvil/cutter bar Double-banded belt drive, except model CH500H is hydraulic driven – no belts Chipper Blade Kit: P/N: 72493

26" (66cm) rotor weighing 165 lbs. (74.8kg) fully assembled • • • • • • • • • • •

1" (2.5cm) thick machine balanced cantilever rotor Chipper Models: CH6730H & CH611DH 6.7" (17cm) square discharge chute 6.5" x 13.5" (16.5cm x 34.3cm) feed chute for easy feeding of limbs Four reversible heat-treated steel chipper blades Four-sided anvil/cutter bar mounted on the side of the feed chute Triple-banded belt New style local sensing two-stage pump with live hydraulics SmartFeed Sensor Hand-operated belt engagement lever Chipper Blade Kit: P/N: 76293-00

30" (76.2cm) rotor weighing 275 lbs. (124.7kg) fully assembled • • • • • • • •

1.25" (3.2cm) thick machine balanced 9" (23cm) machine – Model CHF9540H 6" (15cm) diameter square discharge. Discharges toward the ground from a height of 34" (86cm) 9" x 9" (23cm x 23cm) feed throat opening 16 reversible heat-treated steel chipper blades Four-sided adjustable steel anvil/cutter bar Triple-banded belt drive Chipper Blade Kit: P/N: 74830-00

30" (76.2cm) rotor weighing 275 lbs. (124.7kg) fully assembled

• • • • • • • • •

1.25" (3.2cm) thick machine balanced 8" (20.3cm) and 9" (23cm) machines Models CH800H, CH8720iH, CH8993H, CH8540, CH9540H, CH911DH & CH922DH – same chipper body 8" (20.3cm) discharge chute rotating 360 degrees 9" x 9" (23cm x 23cm) feed throat opening Four reversible heat-treated steel chipper blades Four-sided adjustable steel anvil/cutter bar Triple-banded belt drive, except model CH800H is hydraulic driven – no belts Chipper Blade Kit: P/N: 76293-00

888.625.4520

CHIPPER/SHREDDERS 2" (5cm) CAPACITY CHIPPER/SHREDDER Model: SC2170 ENGINE

EASY TO TRANSPORT

• Max torque: 8.3 ft-lbs at 2,500 rpm, runs at 3,800 rpm

• Weight of machine is distributed evenly throughout

FUEL CAPACITY

DISCHARGE SCREEN

DIRECT DRIVE

MACHINE DIMENSIONS AND WEIGHT

FEED CHUTES

• 120 lbs. (54.4kg)

• Subaru SP 170cc

• .9 gal. (3.4 liters)

• Shredder hopper is 16" x 20" (40.6cm x 50.8cm) • Maximum shredder capacity of up to .75" (2cm) • Maximum chipper feed size of up to 2" (5cm)

• Easy grip wide handle

• Comes standard with 1.13" screen (2.9cm)

• LxWxH – 29" x 23" x 50" (74cm x 58cm x 127cm)

SAFETY

• Meets ISO safety decal standards

CHIPPING BLADES & SHREDDING KNIVES

PARTS & ACCESSORIES

• Blade Dimensions: 3.125" x 2" x .25" (8cm x 5cm x .6cm)

• Fine Screen .75" (2cm) (P/N: 76893-35)

• Four reversible Shredder Knives (standard)

• Wet Debris Screen (P/N: 77639-35)

• Four additional Shredder Knives optional

• Shredder Knives Kit (P/N: 77616-00)

• Two reversible heat-treated steel chipper blades

CHIPPER/SHREDDER ROTOR ASSEMBLY • Rotor weight is 15 lbs. (6.8kg) • Rotor turns at 3,800 rpm

• Standard Screen 1.13" (2.8cm) (P/N: 76758-35)

• Additional Shredder Knives Kit (P/N: 77618-00) • Chipper Blade Kit (P/N: 70738) • Hour/Tach Kit (P/N: 31605-00)

• 12.8" diameter (32.6cm)

SC2170 Debris Screens .75" Fine

1.13" Standard

Wet Debris

www.bearcatproducts.com

CHIPPER/SHREDDERS 3" (7.6cm) CAPACITY CHIPPER/SHREDDERS

1 of 2

Models: SC3206, SC3265, SC3305, SC3305E & SC3342 ENGINES

CHIPPER/SHREDDER ROTOR ASSEMBLY

SC3206 • Briggs & Stratton OHV 206cc • Max torque: 9 ft-lbs. at 2,700 rpm, runs at 3,600 rpm

SC3206 • Weighs 21 lbs. (9.5kg)

SC3305 • Briggs & Stratton OHV 305cc

• 1" (2.5cm) diameter rotor shaft

• Max torque: 14.5 ft-lbs. at 2,800 rpm, runs at 3,600 rpm SC3305E • Briggs & Stratton OHV 305cc – Electric Start • Max torque: 14.5 ft-lbs. at 2,800 rpm, runs at 3,600 rpm SC3265 • Subaru EX 265cc • Max torque: 13.7 ft-lbs. at 2,500 rpm, runs at 3,800 rpm

• Rotates at 3,600 rpm • 12" diameter (30.4cm) SC3265, SC3305, SC3305E, SC3342 • Weighs 27 lbs. (12.3kg) • Rotates at 3,600 rpm • 1" (2.5cm) diameter rotor shaft • 12" diameter (30.4cm)

CHIPPER BLADES & SHREDDER KNIVES

• Two reversible heat-treated chipper steel blades

SC3342 • Briggs & Stratton OHV 342cc

• Blade Dimensions: LxWxH: 3.125" x 2"x .25" (7.6cm x 5cm x 6cm)

• Max torque: 16.5 ft-lbs. at 2,800 rpm, runs at 3,600 rpm

• Eight Reversible Shredder Knives – SC3206

FUEL CAPACITY

• Twelve Reversible Shredder Knives SC3265, SC3305, SC3305E, SC3342

• SC3206 - .8 gal (3 liters) • SC3265 - 1.6 gal (6.1 liters) • SC3305, SC3305E, SC3342 - 1 gal. (3.8 liters)

BEARINGS • Two 1" (2.5cm) greasable bearings with three bolt cast flanges

BELT DRIVE

• With manual belt engagement • SC3206, SC3305, SC3305E – single belt driven • SC3265, SC3342 - d ual belt driven • Spring-loaded belt tensioner

FEED CHUTES

• Shredder hopper is 12" x 25" (30.5cm x 63.5cm) • Maximum shredder capacity of up to .75" (2cm) • Maximum chipper feed size of up to 3" (7.6cm)

SIDE DISCHARGE

• You don’t have to move the equipment as often with a side discharge as you do with a bottom discharge • Heavy-duty 7 gauge steel screens available in four different sizes to fit your needs

CONVENIENT TRANSPORTATION

• Handle placement for the best control over various terrain, or tip it back and use the hopper handle for transporting on a smooth surface • Pneumatic tires feature grease zerks, enabling easy greasing of the hub 888.625.4520

CHIPPER/SHREDDERS 3" (7.6cm) CAPACITY CHIPPER/SHREDDERS

2 of 2

Models: SC3206, SC3265, SC3305, SC3305E & SC3342 HEAVY-DUTY CONSTRUCTION

• Extra strength and reinforcements in areas that matter most • 14 gauge (1.9mm) steel construction • Built to last with welded construction instead of bolt together.

MACHINE DIMENSIONS • LxWxH – 40" x 25" x 46" (101cm x 64cm x 117cm)

• Road Towable Chipper/Shredder Trailer (P/N: 77353-00) • Supplemental Adapter Kit for models SC3265, SC3305, SC3305E & SC3342 Serial C03477 & below (P/N: 77700-00) • Supplemental Adapter Kit for model SC3206 Serial C03477 and below (P/N: 77701-00) PARTS & ACCESSORIES SC3206

WEIGHTS

• Screen - Fine .375" (.95cm) (P/N: 77382-12)

• SC3206 - 195 lbs. (88.5kg)

• Screen - Medium .75" (2cm) (P/N: 77383-12)

• SC3265 - 250 lbs. (113.4kg)

• Screen - Coarse Standard 1.375" (3.5cm) (P/N: 77384-12)

• SC3305 - 228 lbs. (103.4kg) • SC3305E - 240 lbs. (108.9kg) • SC3342 - 263 lbs. (119.3kg)

PARTS & ACCESSORIES

• Two-Wheel Tow Kit (P/N: 77000-00) • Leaf Tamper (P/N: 70089)

• Screen - Wet Debris (P/N: 77385-12) • Shredder Knives Kit – SC3206 (P/N: 77589-00) SC3265, SC3305, SC3305E, SC3342 • Screen - Fine .375" (.95cm) (P/N: 77386-12) • Screen - Medium .75" (2cm) (P/N: 77387-12) • Screen - Coarse Standard 1.375" (3.5cm) (P/N: 77388-12) • Screen - Wet Debris (P/N: 77389-12)

• Debris Bag with Handles (P/N: 17854)

• Blower Attachment (P/N: 70251)

• All Weather Cover (P/N: 70093)

• Shredder Knives Kit (P/N: 70973)

• Chipper Blade Kit (P/N: 70738) • Tach/Hour Meter (P/N: 31605-00)

Debris Screens

.375"

.75" 1.375" Standard Wet Debris A 1.375" debris screen is standard with three others available depending on desired mulch size/type.

www.bearcatproducts.com

CHIPPER/SHREDDER/BLOWER 5" (13cm) CAPACITY CHIPPER/SHREDDER/BLOWER Models: SC5720B ENGINE • Subaru EH 720cc

DOUBLE-BANDED BELT DRIVE • Manual belt engagement

• Max torque: 39.5 ft-lbs. at 2,500 rpm, runs at 3,600 rpm

• Spring-loaded belt tensioner

FUEL CAPACITY

FEED CHUTES

• 9 gal. (34.1 liters)

• Shredder hopper is 13" x 18" (33cm x 48.7cm)

CHIPPER/SHREDDER ROTOR ASSEMBLY

• Maximum chipper feed size of up to 5" (12.7cm)

• Machine balanced

INTEGRATED DISCHARGE

• Maximum shredder capacity of up to .75" (2cm)

• Weighs 121 lbs. (54.9kg)

• 1.5" (3.8cm)-diameter rotor shaft

• With a 360° rotatable, 6" (15.25cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time

• 20.6" (52.3cm) diameter

• Discharge height is 92" (234cm)

• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out

UNIQUE SCREENLESS SHREDDER

• Rotates at 2,000 rpm

CHIPPER BLADES & SHREDDER KNIVES

• Unique product, self-feed chipper/shredder without a screen. This greatly reduces the chance of plugging, especially with damp material

• Four reversible heat-treated chipper steel blades • Blade Dimensions: 3.125" x 2" x .25" (7.6cm x 5cm x 6cm) • 36 Shredder Knives

BEARINGS • Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges

HEAVY-DUTY CONSTRUCTION • 7 gauge steel

HIGHWAY TOWABLE

• 50" (127cm) tread width (center to center) and 5.3-12 tires with 1,000 lb. (454kg) torsion axle suspension enables the chipper to be easily towed down the highway

TOWING WEIGHT

• 930 lbs. (422kg) with fluids at capacity

HITCH

• 2" (5cm) ball coupler is standard

MACHINE DIMENSIONS

• LxWxH – 92" x 52" x 92" (233cm x 131cm x 233cm)

SAFETY

• Meets ISO safety decal standards • Safety chains • 12 volt tail lights standard • Meets NATM Certification

PARTS & ACCESSORIES

• Chipper Blade Kit (P/N: 72493) • Shredder Knives Kit (P/N: 77613-00)

888.625.4520

CHIPPERS 4" (10cm) CAPACITY CHIPPER Model: CH4400 ENGINE

HEAVY-DUTY CONSTRUCTION

• Max torque: 20 ft-lbs. achieved at 2,400 rpm operates at 3,800 rpm

• Trailer is made of 7 gauge steel

• Subaru EX 404cc

FUEL CAPACITY

• 7 gauge steel throughout housing with welded construction • Tongue is 2" x 2" (5cm x 5 cm) with 11 gauge wall thickness

• 1.85 gal. (7 liters)

14" (35.6cm) DIAMETER CANTILEVER ROTOR • 14" (35.6cm) diameter by 1" (2.5cm) thick rotor • Weighs 49 lbs. (22.2kg) • Machine balanced • Rotates at 3,000 rpm

HIGHWAY TOWABLE

• 43" (109cm) tread width (center to center) and 4.80-8 tires with 1,000 lb. (454kg) torsion axle suspension enables the chipper to be easily towed down the highway • 12 volt safety and directional lighting and tow chains are standard

• 1.25" (3.2cm) diameter rotor shaft

TWO CHIPPING BLADES

TOWING WEIGHT

• 536 lbs. (243kg)

• Two reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)

HITCH

BEARINGS

MACHINE DIMENSIONS

• Two 1.25" (3.2cm) greasable bearings with two bolt cast flanges

BELT DRIVE

• Double-banded belt drive with manual belt engagement • Spring-loaded belt tensioner

ANVIL/CUTTER BAR

• Four-sided adjustable to insure good chipping ability

• 2" (5cm) ball coupler is standard

• LxWxH – 75" x 51" x 45" (190cm x 129cm x 114cm)

SAFETY

• Meets ISO safety decal standards • Safety chains • 12 volt tail lights standard • Meets NATM Certification

PARTS & ACCESSORIES

• 5" long x 1.75" wide x .375" thick (12.7cm x 4.4cm x .95cm)

• Blade Kit (P/N: 76295-00)

FEED CHUTE

• Tach/Hour Meter Kit - Gas (P/N: 31605-00)

• Opening 13" x 15" (33cm x 38cm), 38" (96.5cm) off the ground

• Optional Discharge Chute 4.5" x 4.5" (11.4cm x 11.4cm) (P/N: 74634-00)

• Feed throat opening is 5" x 5" (12.7cm x 12.7cm) • Maximum feed size of up to 4" (10cm)

INTEGRATED DISCHARGE

• Standard Discharge 4.5" x 9" (11.4cm x 22.9cm) and discharges towards the ground, from a height of 14" (36cm) • Optional Discharge 4.5" x 4.5" (11.4cm x 11.4cm) square discharge with adjustable deflector, discharges at a height of 55" (140cm)

www.bearcatproducts.com

CHIPPERS 5" (13cm) CAPACITY CHIPPER Model: CH5653 ENGINE

• Subaru EH engine 653cc • Max torque: 33.6 ft-lbs. at 2,500 rpm, runs at 3,800 rpm

HEAVY-DUTY CONSTRUCTION

• .25" (6.35cm) steel housing with welded construction • Trailer is made of 7 gauge steel

FUEL CAPACITY

• 9 gal. (34.1 liters)

• Tongue is 2" x 2" (5cm x 5 cm) with .25" (6.35mm) wall thickness

20" (51cm) DIAMETER ROTOR

HIGHWAY TOWABLE

• 20" (51cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 140 lbs. (63.5kg) • Machine balanced • Rotates at 2,000 rpm

• 44" (112cm) tread width (center to center) and 5.30-12 tires with 1,000 lb. (454kg) torsion axle suspension enables the chipper to be easily towed down the highway • 12 volt safety and directional lighting and tow chains are standard

• 1.5" (3.8cm) diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out

FOUR CHIPPING BLADES

TOWING WEIGHT

• 950 lbs. (431kg)

HITCH

• 2" (5cm) ball coupler is standard

• Four reversible heat-treated steel chipper blades • Blade Dimensions: 3.1" x 2" x .25" (7.9cm x 5cm x .6cm)

MACHINE DIMENSIONS

• LxWxH – 80" x 57" x 95" (203cm x 145cm x 241cm)

BEARINGS

• Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges

BELT DRIVE

• Double-banded belt drive with manual belt engagement • Spring-loaded belt tensioner

ANVIL/CUTTER BAR

• Four-sided adjustable • 5.6" long x 4" wide x .375" thick (14.2cm x 10.2cm x .95cm)

SAFETY

• Meets ISO safety decal standards • Safety chains • 12 volt tail lights standard • Meets NATM Certification

PARTS & ACCESSORIES • Blade Kit (P/N: 72493)

• Tach/Hour Meter Kit - Gas (P/N: 31605-00)

FEED CHUTE

• Opening 27" x 28" (68.6cm x 71.1cm) 43.8" (111cm) off the ground • Feed throat opening is 5.5" x 6" (14cm x 15.2cm) • Maximum feed size of up to 5" (12.7cm)

INTEGRATED DISCHARGE

• With a 360° rotatable, 6" (15.2cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time • Discharge height is 95" (2.4m)

888.625.4520

CHIPPERS 6" (15cm) CAPACITY CANTILEVER CHIPPERS -

1 of 2

Models: CH611DH & CH6730H ENGINES CH611DH • Kubota 1.1 Liter Diesel, 69 cu in. (1.1 liter) • Max torque: 54.2 ft-lbs. achieved at 2,200 rpm • Operates at 3,220 rpm CH6730H • Kohler 730cc • Max torque: 40.9 ft-lbs. achieved at 2,400 rpm

HYDRAULIC FEED SYSTEM

• Steel hydraulic reservoir, 4 gal. (15 liters) capacity on CH611DH and a Nylon hydraulic reservoir, 3 gal. (11.5 liters) capacity on the CH6730H • Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper • Variable feed rate on the CH611DH (available as an accessory on the CH6730H) with load sensing 2-stage pump

• Operates at 3,750 rpm

• Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min)

FUEL CAPACITY/CONSUMPTION

• 9 gal. (34.1 liters)

• Fuel consumption on the Kohler 730cc is estimated at 2.1 gal. (8 liters) per hour at full load • Fuel consumption on the Kubota 1.1 L is estimated at 1.7 gal. (6.44 liters) per hour at full load

• Feed system operates under 2,500 psi

26" (66cm) DIAMETER ROTOR

• 2-stage pump

• 26" (66cm) diameter by 1" (2.5cm) thick rotor • Weighs 165 lbs. (75kg) • Machine balanced • Rotates at 1,780 rpm (CH611DH) • Rotates at 1,650 rpm (CH6730H) • 1.75" (4.45cm) diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out

FOUR CHIPPING BLADES

• Four reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)

BEARINGS

• Single 15" (38cm) diameter top feed roller

PLUS+1® ELECTRONIC CONTROLLER

• Smart feed with automatic “try again” feature to clear jams • Maximizes chipping efficiency and manpower • Minimizes fuel consumption • Provides an Amber code that alerts the operator every 15 hours to inspect chipping blades

FEED CHUTE

• Opening 33" x 37" (84cm x 94cm) tray 30" (76.2cm) off the ground • Feed throat opening is 6.5" x 13" (16.5cm x 33cm) • 90° feed angle • Maximum feed size of up to 6" (15.2cm)

INTEGRATED DISCHARGE

• Two 1.75" (4.5cm) greasable bearings with four bolt cast flanges

CH6730H

BELT DRIVE

• Discharge height is 104" (2.6m)

• Triple-banded belt drive with manual belt engagement • Spring-loaded belt tensioner

ANVIL/CUTTER BAR

• Four-sided adjustable anvil to insure good chipping ability

• With a 360° rotatable, 6" (15.2cm) diameter steel tubing with adjustable spout cap CH611DH • With a 360° rotatable, 6.7" (17cm) square steel chute with screw-type adjustable spout cap • Discharge height is 93" (2.4m)

• 6" long x 4" wide x .625" thick (16.5cm x 10.2cm x 1.6cm)

www.bearcatproducts.com

CHIPPERS 6" (15cm) CAPACITY CANTILEVER CHIPPERS -

2 of 2

Models: CH611DH & CH6730H HEAVY-DUTY CONSTRUCTION

ADJUSTABLE TONGUE JACK

• Feed table is 10 gauge steel on the CH6730H and 7 gauge steel on the CH611DH

• Adjustable jack allows one person to easily maneuver the chipper around and hook up to a vehicle

• Tongue is 3" x 3" (7.6cm x 7.6 cm) with 11 gauge wall thickness

MACHINE DIMENSIONS

• .25" (6.35cm) housing with welded construction

HIGHWAY TOWABLE CH6730H

• 50" (127cm) tread width (center to center) and P205-75R14 tires with 1,800 lb (816kg) torsion axle suspension CH611DH • 50" (127cm) tread width (center to center) and P215-75R15 tires with 2,500 lb. (1030kg) torsion axle suspension

• Roller wheel with 850 lbs. (385kg) rating

CH611DH • LxWxH – 143" x 59" x 93" (363cm x 150cm x 236cm) CH6730H • LxWxH – 126" x 57" x 104" (320cm x 145cm x 264cm)

SAFETY

• Meets ISO safety decal standards • Safety chains • 12 volt tail lights standard • Meets NATM Certification

TOWING WEIGHT

• CH611DH – 2,300 lbs. (1,043kg) • CH6730H – 1,635 lbs. (742kg)

HITCH • 2" (5cm) ball coupler is standard • Height adjustable coupler has 3 positions in 2" (5cm) increments (CH611DH) • CH611DH has a telescoping tongue length may be adjusted up to 18" (45cm)

PARTS & ACCESSORIES

• Blade Kit (P/N: 76293-00) • 2 5/16" Coupler (P/N: 14519-00) • Pintle Hitch (P/N: 14900-00) • Spare Tire Kit (CH611DH)(P/N: 75291-00) • Tach/Hour Meter Kit - Gas (P/N: 31605-00) • Knee Bar (P/N: 76945-00) • Adjustable Feed Speed Sensor Kit (P/N: 76820-00)

Cantilever-Mounted Rotor on Select Models

888.625.4520

CHIPPERS 8" (20cm) CAPACITY TURNTABLE CHIPPERS -

1 of 2

Models: CH8720iH & CH8993H ENGINES CH8720iH • EFI Subaru EH 720cc, Fuel injected • Max torque: 38.5 ft-lbs at 2,800 rpm • Operates at 3,600 rpm CH8993H • Briggs & Stratton Vanguard 993cc • Max torque: 52.4 ft-lbs at 2,350 rpm • Operates at 3,750 rpm

FOUR CHIPPING BLADES

• Four reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)

BEARINGS

• Two 1.75" (4.5cm) greasable bearings with 4 bolt cast flanges

BELT DRIVE

• Triple-banded belt drive with manual belt engagement • Spring-loaded belt tensioner

FUEL CAPACITY/CONSUMPTION • 9 gal (34.1 liters)

• Fuel consumption on the Briggs & Stratton 993cc is estimated at 3 gal. (11.3 liters) per hour at full load • Fuel consumption on the EFI Subaru EH 720cc is estimated at 1.5 gal (5.7 liters) per hour at full load

ANVIL/CUTTER BAR

• Four-sided adjustable to insure good chipping ability • 9" long x 4" wide x .625" thick (22.9cm x 8.9cm x 1.6cm)

HYDRAULIC FEED SYSTEM 30" (76cm) DIAMETER ROTOR

• Steel hydraulic reservoir, 3 gal. (11.5 liters) capacity

• Weighs 275 lbs. (125kg)

• Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper

• Machine balanced

• Variable feed rate with load sensing 2-stage pump

• Rotates at 1,500 rpm

• Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min)

• 30" (76cm) diameter by 1.25" (3.2cm) thick rotor

• 1.75" (4.45cm) diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out

• Self-contained system with infinite speed settings, dedicated neutral and full reverse, pump output 6.6 GPM (25 LPM) and 4hp with maximum pressure and maximum flow, however this is rarely required • Feed system operates under 2,500 psi • Single 15" (38cm) diameter top feed roller • 2-stage pump

New Formed Rotor Paddles

www.bearcatproducts.com

CHIPPERS 8" (20cm) CAPACITY TURNTABLE CHIPPERS

2 of 2

Models: CH8720iH & CH8993H PLUS+1® ELECTRONIC CONTROLLER

ADJUSTABLE TONGUE JACK

• Maximizes chipping efficiency and manpower • Minimizes fuel consumption

• Adjustable jack allows one person to easily maneuver the chipper around and hook up to a vehicle

• Provides an Amber code that alerts the operator every 15 hours to change chipping blades

MACHINE DIMENSIONS

• Smart feed with automatic “try again” feature to clear jams

FEED CHUTE

• Roller wheel with 850 lb. (385kg) rating

• LxWxH – 136" x 79" x 95" (345cm x 200cm x 241cm)

• Opening 30" x 31" (76cm x 79cm) Tray 27" (68cm) off the ground

360° ROTATIONAL BED

• Feed throat opening is 9" x 9" (23cm x 23cm)

• Brake for locking bed in place. With drop pin for positive transport lock

• 90° Feed Angle • Maximum feed size of up to 8" (23cm)

INTEGRATED DISCHARGE

• With a 360° rotatable, 8" (20cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time

• Bed can rotate 360° for ease of feeding from any direction

• Keeps work crews out of the street

SAFETY

• Meets ISO safety decal standards • Safety chains • 12 volt tail lights standard

• Discharge height is 95" (2.41m)

• Meets NATM Certification

HEAVY-DUTY CONSTRUCTION

PARTS & ACCESSORIES

• .25" (6.35cm) steel on the rest of the housing

• 2 5/16" Coupler (P/N: 14519-00)

• Frame is 2.5" x 2.5" (5cm x 5cm) 7 gauge steel tubing

• Pintle Hitch (P/N: 14900-00)

• Feed table is 10 gauge steel

• Low Profile Discharge Chute Kit (P/N: 74581-00)

• Tongue is 3" x 3" (7.6cm x 7.6cm) with .25" (6.35mm) wall thickness

• Knee Bar Safety Kit (P/N: 76195-00)

• .375" (.95cm) steel face plate on the rotor housing

• Blade Kit (P/N: 76293-00)

• Tach/Hour Meter Kit - Gas (P/N: 31605-00)

HIGHWAY TOWABLE

• 69" (174cm) tread width (center to center) and P215-75R15 tires with 3,000 lb (1360kg) torsion axle suspension enables the chipper to be easily towed down the highway

TOWING WEIGHT

• CH8720iH – 2,225 lbs. (1,009kg) • CH8993H – 2,350 lbs. (1,066kg)

HITCH

• 2" (5cm) ball coupler is standard • Height adjustable coupler. Has 3 positions in 2" (5cm) increments

TELESCOPING TONGUE

• Adjustable length and height. The length may be adjusted up to 18" (45cm)

888.625.4520

CHIPPERS 9" (23cm) CAPACITY -

1 of 2

Models: CH911DH & CH922DH ENGINES

HYDRAULIC FEED SYSTEM

• Kubota engine 1.1 Liter Diesel, 69 cu in. (1.1 liter)

• Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper

CH911DH

• Max torque: 54.2 ft-lbs. achieved at 2,200 rpm • Operates at 3,220 rpm CH922DH • Kubota engine 2.2 Liter Diesel 134 cu in. (2.2 liter) • Max torque: 108.4 ft-lbs. achieved at 1,800 rpm • Operates at 3,020 rpm

FUEL CAPACITY/CONSUMPTION

• Steel hydraulic reservoir, 3 gal. (11.5 liters) capacity

• Variable feed rate with load sensing 2-stage pump • Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min) • Self-contained system with infinite speed settings, dedicated neutral and full reverse, pump output 6.6 GPM (25 LPM) and 4 hp with maximum pressure and maximum flow, however this is rarely required • Feed system operates under 2,500 psi

• 18 gal (68 liters)

• Single 15" (38cm) diameter top feed roller

• Fuel consumption on the 1.1 Liter Diesel Kubota is estimated at 1.7 gal. (7.57 liters) per hour at full load

• 2-stage pump

• Fuel consumption on the 2.2 Liter Diesel Kubota is estimated at 3 gal. (14.2 liters) per hour at full load

PLUS+1® ELECTRONIC CONTROLLER

30" (76cm) DIAMETER ROTOR

• 30" (76cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 275 lbs. (125kg) • Machine balanced • Rotates at 1,600 rpm • 1.75" (4.45cm) diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out

FOUR CHIPPING BLADES

FEED CHUTE

• Opening 30" x 31" (76cm x 79cm) Tray 27" (68cm) off the ground • Feed throat opening is 9" x 9" (23cm x 23cm) • 90° Feed Angle • Feed table is 38" (96.5cm) long

• Four reversible heat-treated steel chipper blades

• Maximum feed size of up to 9" (23cm)

• Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)

INTEGRATED DISCHARGE

BEARINGS

• Two 1.75" (4.5cm) greasable bearings with four bolt cast flanges

BELT DRIVE

• Triple-banded belt drive with manual belt engagement • Spring-loaded belt tensioner

ANVIL/CUTTER BAR

• Four-sided adjustable to insure good chipping ability • 9" long x 4" wide x .625" thick (22.9cm x 10.1cm x 1.6cm)

• With a 360° rotatable, 8" (20cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time • Discharge height is 96" (2.4m)

HEAVY-DUTY CONSTRUCTION

• .375" (.95cm) steel face plate on the rotor housing • .25" (6.35mm) steel on the rest of the housing • 4" (10cm) "C" Channel frame construction

HIGHWAY TOWABLE

• 69" (175cm) tread width (center to center) and P215-75R15 tires with 3000 lb (1360kg) torsion axle suspension enables the chipper to be easily towed down the highway

www.bearcatproducts.com

CHIPPERS 9" (23cm) CAPACITY -

2 of 2

Models: CH911DH & CH922DH TOWING WEIGHT

SAFETY

• CH922DH – 2,700 lbs. (1,225kg)

• Safety chains

• CH911DH – 2,480 lbs. (1,125kg)

TELESCOPING TONGUE

• Pintle hitch is standard with 2" (5cm) ball coupler available as an accessory • Adjustable length and height. The length may be adjusted up to 18" (45cm) with four pin settings on the pintle hitch

• Meets ISO safety decal standards • 12 volt tail lights standard • Meets NATM Certification

PARTS & ACCESSORIES

• Blade Kit (P/N: 76293-00) • Electric Brake Kit (P/N: 72730)

ADJUSTABLE TONGUE JACK

• 2" (5cm) Coupler 10,000 lbs. (P/N: 77232-00)

• Roller wheel with 850 lbs. (385kg) rating

• 2 5/16" (5.9cm) Coupler (P/N: 14519-00)

• Adjustable jack allows one person to easily maneuver the chipper around and hook up to a vehicle

• Low Profile Discharge Chute Kit (P/N: 74581-00)

MACHINE DIMENSIONS

• LxWxH – 119" x 79" x 96" (302cm x 200cm x 244cm)

888.625.4520

• Fine Chip Rotor Kit (P/N: 76775-00) • Knee Bar Safety Kit (P/N: 76195-00) • Hour Meter Kit - Diesel (P/N: 71921)

PTO MACHINES 5" (13cm) CAPACITY CHIPPER/SHREDDER Model: SC5540 PTO DRIVE

PARTS & ACCESSORIES

• Recommend 25-45 hp (19-34kW) at the PTO

• Shredder Knives Kit (P/N: 70972)

• 540 rpm input

CHIPPER/SHREDDER ROTOR ASSEMBLY • Weighs 112 lbs. (22.2kg) • Machine balanced • Rotates at 2,000 rpm • 1.5" (3.8cm) diameter rotor shaft • 19" diameter

• Double-Edge Blade Kit (P/N: 72493) • Vacuum Hose Kit (P/N: 71125) (requires P/N: 71110) • Two-Speed Blower (P/N: 71110) • Single-Speed Blower (P/N: 70487) • Screen, Fine – .375" (.95cm) (P/N: 70703) • Screen, Medium – .75" (2cm) (P/N: 70531) • Screen, Standard – 1.5" (3.8cm) (P/N: 70332) • Screen, Wet Debris (P/N: 70559)

CHIPPER BLADES & SHREDDING KNIVES

• Four reversible heat-treated chipper steel blades • Blade Dimensions: 3.125" x 2" x .25" (7.9cm x 5cm x .64cm) • 36 Reversible Shredding Knives

BEARINGS

• Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges

BELT DRIVE

• Two single-banded belts

FEED CHUTES

• Shredder hopper is 20" x 30" (50.8cm x 76.2cm) • Maximum shredder capacity up to .75" (2cm) • Maximum chipper feed size of up to 5" (12.7cm)

HEAVY-DUTY CONSTRUCTION

• 7 gauge steel chipper/shredder housing • .75" (1.9cm) steel flywheel • Discharge screen is .25" (6.35mm) steel

MACHINE DIMENSIONS

• LxWxH – 44" x 43" x 48" (111cm x 109cm x 122cm) • Weight: 450 lbs. (204.1 kg)

SAFETY

• Meets ISO safety decal standards

www.bearcatproducts.com

PTO MACHINES 5" (13cm) CAPACITY CHIPPER/SHREDDER/BLOWER Model: SC5540B POWER SOURCE • 540 rpm input

• Recommend 25-45 hp (19-34kW) at the PTO

CHIPPER/SHREDDER ROTOR ASSEMBLY • Weighs 145 lbs. (65.8kg)

SAFETY

• Meets ISO safety decal standards

PARTS & ACCESSORIES

• Chipper Blade Kit (P/N: 72493) • Shredder Knives Kit (P/N: 70972)

• Machine balanced • Rotates at 2,000 rpm • 1.5" (3.8cm) diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out • 20.6" (52.3cm) diameter

CHIPPER BLADES & SHREDDING KNIVES

• Four reversible heat-treated chipper steel blades • Blade Dimensions: 3.125" x 2" x .25" (7.9cm x 5cm x .64cm) • 36 Reversible Shredding Knives

BEARINGS

• Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges

BELT DRIVE

• Double-banded belt drive

FEED CHUTES

• Shredder hopper is 13" x 20" (33cm x 51cm) • Maximum shredder capacity of up to .75" (2cm) • Maximum chipper feed size of up to 5" (12.7cm)

INTEGRATED DISCHARGE

• With a 360° rotatable, 6" (15.25cm) diameter steel tubing with adjustable discharge

CHIPPER/ SHREDDER/ BLOWER

• Discharge height is 87" (221cm)

UNIQUE SCREENLESS SHREDDER

• Unique product, self-feed chipper/shredder without a screen

HEAVY-DUTY CONSTRUCTION • 7 gauge reinforced steel bed

MACHINE DIMENSIONS

• LxWxH – 49" x 50" x 87" (124cm x 127cm x 221cm) • Weight: 720 lbs. (326kg)

888.625.4520

PTO MACHINES 4.5" (11cm) CAPACITY CANTILEVER CHIPPER Model: CH45540 PTO DRIVE

ANVIL/CUTTER BAR

• Recommend 15-28 hp (11-21kW) at the PTO

• 5.6" long x 4" wide x .375" thick (14.2cm x 10.2cm x .95cm)

• 540 rpm input

14" (35.6cm) DIAMETER ROTOR

• 14" (35.6cm) diameter by 1" (2.5cm) thick rotor • Weighs 49 lbs. (22.2kg) • Machine balanced • Rotates at 2,000 rpm • 1.25" (3.2cm) diameter rotor shaft

CHIPPER BLADES

• Two reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)

BEARINGS

• Two 1.25" (3.2cm) greasable bearings with two bolt cast flanges

• Four-sided adjustable to insure good chipping ability

FEED CHUTE

• Opening 13" x 14.5" (33cm x 36.8cm), 39" (99cm) off the ground • Feed throat opening is 4.5" x 5" (11.4cm x 12.7cm) • Maximum feed size of up to 4.5" (11.4cm)

INTEGRATED DISCHARGE

• Standard discharge is 4.5" x 4.5" (11.4cm x 11.4cm) and discharges towards the ground, from a height of 14.9" (38cm) • Optional Discharge is 4.5" x 4.5" (11.4cm x 11.4cm) discharges with adjustable deflector at a height of 55" (140cm)

HEAVY-DUTY CONSTRUCTION

BELT DRIVE

• 7 gauge steel throughout housing with welded construction

• Spring-loaded belt tensioner

3-POINT HITCH

• Double-banded belt drive • Category 1

• Chipper weight is 361 lbs. (164kg)

MACHINE DIMENSIONS

• LxWxH – 40" x 41" x 44" (102cm x 104cm x 112cm)

SAFETY

• Meets ISO safety decal standards

PARTS & ACCESSORIES

• Blade Kit (P/N: 76295-00) • Optional Discharge Chute 4.5" x 4.5" (11.4cm x 11.4cm) (P/N: 74634-00)

www.bearcatproducts.com

PTO MACHINES 5" (13cm) CAPACITY Models: CH5540 & CH5540H PTO DRIVE

ANVIL/CUTTER BAR

• Recommend 25-45 hp (19-34kW) at the PTO

• 5.6" long x 4" wide x .375" thick (14.2cm x 10.2cm x .95cm)

• 540 rpm input

20" (51cm) DIAMETER ROTOR

• 20" (51cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 140 lbs. (63.5kg) • Machine balanced • Rotates at 1,615 rpm (CH5540) • Rotates at 1,630 rpm (CH5540H) • 1.5" (3.8cm)-diameter rotor shaft

• Four-sided adjustable anvil to insure good chipping ability

HYDRAULIC FEED SYSTEM (CH5540H)

• Single 15" (38cm) diameter top feed roller • Maximum capacity of 3 gal. (11.36 LPM) at 2,500 psi • Electric/Hydraulic System to control feed roller direction • 2-stage hydraulic pump

• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out

FEED CHUTE

CHIPPER BLADES

• Maximum feed size of 5" (13cm)

• Blade Dimensions: 3.1" x 2" x .25" (7.9cm x 5cm x .64cm)

INTEGRATED DISCHARGE

• Four reversible heat-treated steel chipper blades

BEARINGS

• Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges.

BELT DRIVE

• Double-banded belt drive • Spring-loaded belt tensioner

• Opening 28" x 28" (71cm x 71cm) • Feed throat opening is 5.5" x 7.5" (14cm x 19cm)

• With a 360° rotatable, 6" (15.25cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time • Discharge height is 90" (230cm)

HEAVY-DUTY CONSTRUCTION

• .25" (6.35mm) steel throughout housing with welded construction

CATEGORY 1 3-POINT HITCH

• CH5540 - Weight is 600 lbs. (272kg) • CH5540H - Weight is 980 lbs. (445kg)

MACHINE DIMENSIONS

• CH5540 – LxWxH 50" x 45" x 90" (127cm x 114cm x 229cm) • CH5540H – LxWxH 68" x 49" x 90" (173cm x 124cm x 229cm)

SAFETY

• Meets ISO safety decal standards

PARTS & ACCESSORIES • Blade Kit (P/N: 72493)

• Auto Feed Kit - CH5540H (P/N: 73071)

888.625.4520

PTO MACHINES 8" (20cm) CAPACITY Model: CH8540 PTO DRIVE

• 540 rpm input

BEARINGS

• Recommend 35hp to 60hp (26kW-45kW) at the PTO

• Two 1.75" (4.5cm) greasable bearings with 4 bolt cast flanges

30" (76cm) DIAMETER ROTOR

BELT DRIVE

• 30" (76cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 275 lbs. (125kg) • Machine balanced • Rotates at 1,500 rpm • 1.75" (4.5cm)-diameter rotor shaft

• Triple-banded belt drive

ANVIL/CUTTER BAR

• Four-sided adjustable anvil • 9" long x 4" wide x .625" thick (22.9cm x 10.2cm x 1.6cm)

• Easily accessible through the hinged cover, when opened, it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out

FEED CHUTE

CHIPPER BLADES

• Feed throat opening is 9" x 9" (23cm x 23cm)

• Four reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm)

• Opening 30" x 31" (76cm x 79cm) 46.5" (118cm) off the ground • Maximum feed size of up to 8" (23cm)

INTEGRATED DISCHARGE

• With a 360° rotatable, 8" (20cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time • Discharge height is 93" (236cm)

HEAVY-DUTY CONSTRUCTION

• .375" (.95cm) steel face plate on the rotor housing • .25" (6.35mm) steel on the wrap around with welded construction • Frame is 2" x 2" (5cm x 5cm), 7 gauge steel

3-POINT HITCH • Category 1

MACHINE DIMENSIONS

• LxWxH – 54" x 47" x 93" (137cm x 119cm x 236cm) • Weight: 886 lbs. (402kg)

SAFETY

• Meets ISO safety decal standards

PARTS & ACCESSORIES

• Blade Kit (P/N: 76293-00) • Low Profile Discharge Chute Kit (P/N: 74581-00)

www.bearcatproducts.com

PTO MACHINES 9" (23cm) CAPACITY

1 of 2

Models: CH9540H & CHF9540H PTO DRIVE

• 540 rpm input

BEARINGS

• Recommend 35hp to 60hp (26kW-45kW) at the PTO

• Two 1.75" (4.5cm) greasable bearings with 4 bolt cast flanges

30" (76CM) DIAMETER ROTOR

BELT DRIVE

• 30" (76cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 275 lbs. (125kg) • Machine balanced • Rotates at 1,500 rpm • 1.75" (4.45cm) diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out

CHIPPER BLADES CH9540H

• Four reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm) CHF9540H • 16 reversible heat-treated steel chipper blades • Blade Dimensions: 3.1" x 2" x .25" (7.9cm x 5cm x .6cm) • Blades are spaced on the rotor to provide maximum coverage and produce an extremely small chip

• Triple-banded belt drive

ANVIL/CUTTER BAR

• Four-sided adjustable anvil • 9" long x 4" wide x .625" thick (22.9cm x 10.2cm x 1.6cm)

HYDRAULIC FEED SYSTEM

• Steel hydraulic reservoir, 3 gal. (11.5 liter) capacity • Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper • Variable feed rate with load sensing 2-stage pump • Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min) • Self-contained system with infinite speed settings, dedicated neutral and full reverse, pump output 6.6 GPM (25 LPM) and 4Hp with maximum pressure and maximum flow, however this is rarely required • Feed system operates under 2,500 psi • Single 15" (38cm) diameter top feed roller • 2-stage hydraulic pump

888.625.4520

PTO MACHINES 9" (23cm) CAPACITY

2 of 2

Models: CH9540H & CHF9540H PLUS+1® ELECTRONIC CONTROLLER • Smart feed with automatic “try again” feature to clear jams • Maximizes chipping efficiency and manpower • Minimizes fuel consumption • Provides an Amber code that alerts the operator every 15 hours to inspect chipping blades

FEED CHUTE • Opening 30" x 31" (76cm x 79cm) Tray 27" (68cm) off the ground • Feed throat opening is 9" x 9" (23cm x 23cm) • 90° feed angle • Maximum feed size of up to 9" (23cm)

INTEGRATED DISCHARGE CH9540H

• 360° rotatable, 8" (20cm) diameter steel tubing with adjustable spout cap discharges from a height of 93" (236cm)

3-POINT HITCH • Category 1

• Chipper weight is 1,300 lbs. (590kg)

MACHINE DIMENSIONS CH9540H

• LxWxH – 70" x 50" x 93" (178cm x 127cm x 236cm) CHF9540H • LxWxH – 70" x 61" x 63" (178cm x 155cm x 160cm)

SAFETY

• Meets ISO safety decal standards

PARTS & ACCESSORIES

• Blade Kit for model CH9540H (P/N: 76293-00) • Blade Kit for model CHF9540H (P/N: 74830-00) • Low Profile Discharge Chute Kit (P/N: 74581-00) • Fine Chip Rotor Kit (P/N: 76775-00)

CHF9540H • 6" (15cm) diameter square discharge. Discharges toward the ground from a height of 34" (86cm)

HEAVY-DUTY CONSTRUCTION • .375" (.95cm) steel face plate on the rotor housing • .25" (6.35mm) steel on the rest of the housing • Frame is 2" x 2" (5cm x 5cm), 7 gauge steel

www.bearcatproducts.com

SKID STEER CHIPPERS 4.5" (13cm) TO 8" (20cm) CAPACITY Models: CH450H, CH500H & CH800H SKID-STEER MOUNT

ANVIL/CUTTER BAR

• CH500H fits skid steers with standard (Minimum: 15 gpm - Maximum: 22 gpm)

HYDRAULIC FEED (CH500H AND CH800H)

• CH450H fits mini skid steer (Minimum: 11 gpm - Maximum: 15 gpm)

• CH800H fits skid steers with high-flow hydraulics (Minimum: 25 gpm - Maximum: 38 gpm)

• Four-sided adjustable anvil to insure good chipping ability

• Four position manual valve control (Reverse - Neutral - Forward - Reverse)

• Infinite speed settings with turn of a handle

• CH500H and CH800H have two mounts, so chipper can be mounted with feed table facing forward or to the curbside

FEED CHUTES

• Easy to attach just connect chipper to the SAE J2513 Quik-Tach, attach the hydraulic hoses, and you are ready to go

CH450H • 4.5" x 4.5" (11.4cm x 11.4cm) chipper opening for side limbs. Maximum feed size of 4.5" (11.4cm)

CHIPPER ROTOR

CH500H • 5.5" x 7" (14cm x 18cm) chipper opening for side limbs. Maximum feed size of 5" (12.7cm)

CH450H - Cantilever • • • • •

14" (35.6cm) diameter by 1" (2.5cm) thick rotor Weighs 49 lbs. (22.2kg) Machine balanced Rotates at 2,700 rpm at 11 gpm – 3,700 rpm at 15 gpm 1.25" (3.2cm) diameter rotor shaft

CH500H • 20" (51cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 140 lbs. (63.5kg) • Machine balanced • Rotates at 2,700 rpm at 15 gpm – 4,000 rpm at 22 gpm • 1.5" (3.8cm) diameter rotor shaft CH800H • 30" (76cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 275 lbs. (125kg) • Machine balanced • Rotates at 1,600 rpm at 25 gpm – 2,500 rpm at 38 gpm • 1.75" (4.45cm) diameter rotor shaft

CHIPPING BLADES

• Reversible heat-treated chipper steel blades • CH450H has two blades • CH500H and CH800H have four blades • CH450 & CH800H - LxWxH – 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm) • CH500H - LxWxH – 3.125" x 2" x .25" (7.9cm x 5cm x .6cm)

BEARINGS • CH450H - Two 1.25" (3.2cm) greasable bearings with two bolt cast flanges • CH500H - Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges • CH800H - Two 1.75" (4.5cm) greasable bearings with four bolt cast flanges

888.625.4520

H800H C • 9" x 9" (23cm x 23cm) chipper opening for side limbs. Maximum feed size of 8" (20cm)

INTEGRATED DISCHARGE • The CH450H's standard discharge is 4.5" x 9" (11.4cm x 22.9cm) and discharges towards the ground, from a height of 10.5" (.27m) • The CH500H and the CH800H have a 360° rotating, 6" (15cm) (CH500H) or 8" (20cm) (CH800H) diameter steel tubing with adjustable deflector cap thich allows you to put the chips where you want them the first time. These two models also discharge at a height of 93" (2.36m)

MACHINE DIMENSIONS & WEIGHTS CH450H • 41" x 28" x 40" (104cm x 71cm x 102cm) 359 lbs. (163kg) CH500H • 73" x 53" x 93" (185cm x 135cm x 236cm) 1,145 lbs. (520kg) CH800H • 74" x 60" x 88" (188cm x 152cm x 234cm) 1,525 lbs. (693kg)

SAFETY

• Meets ISO safety decal standards

PARTS & ACCESSORIES

• Optional Discharge Chute 4.5" x 4.5" (11.4cm x 11.4cm) (P/N: 74634-00) CH450H • Chipper Blade Kit (P/N 76295-00) CH500H • Chipper Blade Kit (P/N: 72493) CH800H (Serial #804670 & up) • Chipper Blade Kit (P/N: 76293-00) 31

LOG SPLITTERS Models: LS22 & LS27 ENGINES

TRANSPORT

• LS27 – Subaru SP 210cc

• Weight distributed evenly

• LS22 – Subaru SP 170cc

FUEL CAPACITY

• LS22 – .95 gal. (3.6 liters) • LS27 – .95 gal. (3.6 liters)

TONNAGE/FORCE

• LS22 – up to 22 tons of splitting force • LS27 – up to 27 tons of splitting force

CYLINDER

• LS22 – 4" (10cm) diameter • LS27 – 4.5" (11cm) diameter

OPERATING POSITIONS

• 4.8-8 (12cm x 20cm) wheels • 2" (5cm) Ball Coupler • Lights and fenders are available as an accessory • Maximum Tow Speed – 45 mph (72 Km/h)

SAFETY

• Meets ISO safety decal standards

PARTS & ACCESSORIES

• Log Splitter Valve Seal Kit (P/N: 77622-00) • Log Splitter Cradle Kit (P/N: 77189-00) • Quick Split Kit (P/N: 75896-00) • Fenders & Tail Light Kit (P/N: 77510-00) • Cast Wedge Kit (P/N: 77380-00)

• Horizontal and vertical

• 4-Way Wedge Kit (P/N: 77514-00)

CYCLE TIMES

• Tach/Hour Meter Kit (P/N: 31605-00)

• LS22 – 12 Seconds • LS27 – 14 Seconds

HYDRAULICS

• LS22 – 4 gal. (15 liters) system with a 2-stage 14 gpm (53 liters) pump • LS27 – 4.5 gal. (17 liters) system with a two-stage 14 gpm pump

MAXIMUM LOG LENGTH • 24" (61cm)

CAST IRON WEDGE

• Overall LxWxH – 6.25" x 8.25" x 8" (16cm x 21cm x 20cm) • Splitting surface LxWxH – 5" x 5.75" x 7.75" (12.7cm x 14.6cm x 19.7cm)

MACHINE DIMENSIONS & WEIGHTS

• LxWxH – 84" x 39" x 40" (213cm x 99cm x 101cm) • LS22 – 450 lbs. (204kg) • LS27 – 455 lbs. (206.1kg)

BEAM

• Wide end plate for greater stability in the vertical position • Bed Height - 30" (76cm) from ground

www.bearcatproducts.com

WHEELED TRIMMERS Models: WT190, WT190T & WT190S ENGINE

• Briggs & Stratton Quantum 190cc

FUEL CAPACITY

• .25 gal. (.95 liter)

TRIMMER DISC PLATE DESIGN

• Made of steel, not aluminum or plastic • Easy line replacement design

TRIMMER SHAFT & MOW BALL • • • •

.75" (1.9cm) steel trim head shaft Heat-treated steel mow ball Single belt driven cutting head 2.25" collared anti-wrap collar design

ADJUSTABLE CUTTING HEIGHT

• Trimmer disc can be reversed providing two different cutting heights

TRIMMER LINE • • • •

.155 mil round line standard .130 mil line optional Ten 21" (52cm) pieces of round .155 mil included .155 & .175 mil CrossFire line available

SOUND LEVEL

• The average dB rating at the operator is 92 dB pressure and 99 dB power level.

SELF-PROPELLED

• Model WT190S self-propelled with 3 speed transmission • Speeds for 3-speed transmission are 1 to 3 mph.

SAFETY

• Meets ISO safety decal standards

FEATURES • Comes with .155 mil line. .130 mil line optional. .75" Steel Trim Head Shaft and 5/8" Solid Steel Axle. Enclosed undercarriage to keep debris from getting in. Three different handle bar height settings for operator convenience. Powder baked paint handle bar and bail with foam grip. Much more uniform cut than a hand held trimmer. • Mechanical “Off Center Trim" tilts head 18° and moves body over for straight trimming. This function allows for trimming along the edge and down to the base of a sidewalk. With respect to wood/vinyl fences, you can go along under the fence not marking it up and with chain link fence you can get under it without being as apt to break the trimmer line.

OFF-SET TRIM (WT190)

• Body of trimmer can be pivoted to the left 13° or 4" (10.2 cm) at the nose, to reach beyond the wheel base.

TILT (WT190T)

Standard Wrapping Method

• Three settings, 5°, 10° and 13° • Trim and edge along fences, barriers, foundations, walls and other obstructions

BUILT TO LAST

• 14 gauge steel frame & cutting head • Enclosed housing keeps debris out • 5/8" Solid steel axle

Optional Wrapping Method 1

CUTTING SWATH

• Cutting swath is 24" (61cm), while machine is only 21" (53cm) from the outer edges of tires

Optional Wrapping Method 2

LARGE WHEELS

• Large 15" (38.1cm) wheels with shielded ball bearings

ADJUSTABLE HANDLE BAR

• Three settings for ergonomic operation

WEIGHT

• WT190 - 77 lbs. (35kg) • WT190T - 77 lbs. (35kg) • WT190S - 82 lbs. (37.2kg)

888.625.4520

WHEELED TRIMMERS Models: WT190, WT190T & WT190S

ACCESSORIES

.130" diameter line Round, 10 pk. P/N: 72777

14" Sabre Tooth Blade Carbide tipped teeth for small trees & saplings up to 4" (10cm) in diameter P/N: 74548-00

14" Triple Blade Brush Cutter For extremely heavy/thick weeds P/N: 32086-00

Round, 1 lb. donut P/N: 12388 Square, 10 pk. P/N: 72778 Square, 1 lb. donut P/N: 12389

Nylon Blade Kit P/N: 73060 .155" diameter 10 Pack 20" pre-cut length, P/N: 32029-00 .175" diameter 10 pack 20" pre-cut length, P/N: 32031-00

.155" diameter line Round, 10 pk. P/N: 72780

Proline Head P/N: 74891-00

Round, 1 lb. donut P/N: 12390 Square, 10 pk. P/N: 72779 Square, 1 lb. donut P/N: 12391 .155" diameter Round 10 Pack 20" pre-cut length, P/N: 32030-00

Heat-treated Mow Ball P/N: 72704-12 34

www.bearcatproducts.com

STUMP GRINDER Model: SG340 ENGINE

ENGINE KILL SWITCH

• Honda GXV 340cc

• Safety feature to shut engine off if disengaged for added safety

DOUBLE-BANDED BELT DRIVE SYSTEM

• Double-banded belt driving the cutter head for more positive power transfer. Belt tension idler • Reduces belt maintenance greatly

MACHINE DIMENSIONS

• LxWxH – 52" x 23" x 44" (132cm x 58cm x 112cm)

WEIGHT

• 195 lbs. (88kg)

CARBIDE TIPPED TEETH

• 12 carbide tipped teeth offer maximum cutting performance. These teeth are locked into the cutter head (8 curved, 4 straight teeth) • The cutter head turns at 3,600 rpm with a speed at the tips 8,460 ft/min (2578 m/min) • A screen covered opening increases visibility to the cutter head

SAFETY

• Meets ISO safety decal standards

PARTS

• 12 Blade C utter Replacement Kit (P/N: 76292-00)

7" (17.8cm) DIAMETER CUTTER HEAD

• Large cutting diameter giving a smooth cut and can be easily removed for quick and easy sharpening • Cutter head at 15 degree angle • Designed for use on stumps from 6" (15cm) above grade to a maximum of 4" (10cm) below grade

DEBRIS FLAP • Mounted to the stump grinder axle

LARGE ENCLOSED DRIVE SHAFT

• Prevents chips from building up in the belts and pulleys • Large 1.5" (3.8cm) diameter drive shaft provides superior reliability

16" (40.64cm) PNEUMATIC WHEELS

• Pneumatic tires 4.80-8 rim with ball bearing hub

SINGLE WHEEL BRAKE

• Allows the stump grinder to pivot and keep in position while grinding effortlessly

Single Wheel Brake

888.625.4520

12 Blade Cutter Replacement Kit P/N: 76292-00

WHEELED VACUUMS Models: WV160, WV160S, WV190 & WV190S

ENGINES

SAFETY

• WV190/WV190S – Briggs & Stratton 190cc Professional Series

PARTS & ACCESSORIES

• WV160/WV160S – Honda 160cc GCV

FAN ROTOR

• Meets ISO safety decal standards

• Additional Debris Bag (P/N: 31339-00)

• 5-blade steel fan

• Caster Wheels (P/N: 76967-00)

• .25" (6.35mm) Steel welded rotor construction

• 4 " Diameter Hose Kit (P/N: 73606-00)

ONE PIECE HOUSING

• D urable Nozzle Wear Plate (P/N: 73640-00)

• Made with .20" (.5cm) thick Linear Low Density Polyurethane with a UV inhibitor

• Vacuum Wear Liner (P/N: 76466-00)

• Easily removable adapter with bag • Discharge opening 6" x 6.5" (15cm x 16.27cm) • Intake width 27" (68.58cm)

SELF-PROPELLED

• Models WV160S and WV190S are 3 speed self-propelled (1st – .71 mph (1.14 kph), 2nd – .93 mph (1.5 kph), 3rd – 1.21 mph (1.95 kph)) • Self-propelled rear wheel drive provides more traction • Ball bearing wheels for a smoother, easier ride

HANDLEBARS

• Four adjustable height settings • Cushion Grip

BAG

• Large capacity, hard bottom, quick dump bag, 5-bushel capacity • Dust reducing • Heavy-duty, double stitched nylon zipper with deflector flaps • Adjustable hanger straps

ADJUSTABLE FRONT – FIVE HEIGHT SETTINGS

• .25" (.64cm) above ground, ground level set at factory • 1.25" (3.175cm) • 2.375" (6.0325cm) • 3.5" (8.89cm) • 4.5" (14.43cm)

MACHINE DIMENSIONS

• 61" x 27" x 46" (155cm x 69cm x 117cm) at maximum handle height • WV160 – 108 lbs. (49kg) • WV190 – 113 lbs. (51kg) • WV160S – 121 lbs. (55kg) • WV190S – 126 lbs. (57kg)

www.bearcatproducts.com

DEBRIS LOADERS HITCH MOUNT DEBRIS LOADERS Models: DL8390, DL10570 ENGINES

• DL8390 Honda GX 390cc with recoil start • DL10570 Briggs & Stratton Vanguard 570cc with recoil start

FUEL CAPACITY

• DL8390 - 1.6 gal. (6 liters) • DL10570 - 2.1 gal. (7.9 liters)

FAN AND HOUSING

• Wear liners made out of high strength steel • 4-blade fan made of .375" (.9cm) steel • Scrolled fan housing for more efficient transfer of air • Direct drive • One bolt access cover removal for easy fan clean out

DISCHARGE CHUTE

• 360° Rotational 8" (20.3cm) discharge chute

BUILT TO LAST

• Heavy-duty hose swivel boom • Light-weight aluminum handle • 8" (20.3cm) diameter 12' (3.6m) long flex hose (model DL8390)

MACHINE DIMENSIONS DL8390

• LxWxH – 35" x 25" x 58" (89cm x 64cm x 147cm) DL10570 • LxWxH – 35" x 25" x 58" (89cm x 64cm x 147cm)

WEIGHTS DL8390

• 280 lbs. (127kg) DL10570 • 280 lbs. (127kg)

SAFETY

• Meets ISO safety decal standards

PARTS & ACCESSORIES

• Wear Liner Replacement Kit (P/N: 75768-00) • 4' (1.2 m) Flexible Horizontal Chute Extension (P/N: 74737-00) • 16" Vertical Chute Extension (P/N: 75888-00) • Swing Away Hitch Mount Kit (P/N: 75739-00) • Tailgate Adapter Kit (P/N: 75753-00)

• 10" (25.4cm) diameter 12' (3.6m) long flex hose (model DL10570)

CFMS

• DL8390 – 2300 • DL10570– 2500

888.625.4520

DEBRIS LOADERS SKID MOUNT DEBRIS LOADERS Model: DL12653, DL12720

ENGINES DL12653

• Subaru EH 653cc with electric start DL12720 • Subaru EH 720cc with electric start

FUEL CAPACITY

• 9 gal. (34.1 liters) polyethylene tank

SAFETY

• Meets ISO safety decal standards

PARTS & ACCESSORIES

• Flexible Hose 12" x 12' (30.5cm x 3.7m) (P/N: 12778) • Wear Liner Replacement Kit (P/N: 77073-00) • 16" (40.6 cm) Vertical Chute Extension (P/N: 75888-00)

FAN AND HOUSING

• 4' (1.2 m) Flexible Horizontal Chute Extension (P/N: 74737-00)

• Wear liners made out of special high strength steel

• Universal Road Towable Trailer Kit (P/N: 77041-00)

• 4-blade fan made out of .375" (9.5mm) steel

• 12 Volt Work Light Kit (P/N: 77105-00)

• Scrolled fan housing for more efficient transfer of air

DRIVE DL12653 • Direct drive DL12720 • Double-banded belt drive with manual belt engagement

DISCHARGE CHUTE

• 360° rotational 8" (20cm)

BUILT TO LAST

• Heavy-duty swivel boom with hose storage • 12" (30.5cm) diameter 12' (3.6m) long flex hose • Lightweight aluminum handle • One bolt access cover removal for easy fan clean out

MACHINE DIMENSIONS DL12653

• LxWxH – 30" x 50" x 86" (76cm x 127cm x 218cm) DL12720 • LxWxH – 30" x 50" x 86" (76cm x 127cm x 218cm)

WEIGHTS DL12653 • 595 lbs. (269.9 kg) DL12720 • 675 lbs. (306.2 kg)

CFMS

Model shown with optional trailer.

• DL12653 – 3400 • DL12720 – 3400

www.bearcatproducts.com

ECHO BEAR CAT GEAR REUSABLE V INYL E ARPLUGS W ITH CASE The handy carrying case can be worn on your belt when not in use. Cleanup is easy with just warm water. CE and OSHA approved. P/N: 31539-00

E AR MUFFS These light-weight ear muffs have an NRR of 29 dB(A) when used as directed and meet CE standard 3.19. P/N: 36775-00 CE EN352-1:2002

SAFET Y GL ASSES

HELMET SYSTEM

Lightweight and impact resistant. Hard-coated opticalgrade, abrasion resistant lenses. Polycarbonate lenses offer 99.9% protection from the most intense UV rays. Includes helmet, mesh face visor and ear protection. P/N: 36776-00

Tech Glasses P/N: 36773-00

Zone II Glasses P/N: 36774-00

PREMIUM SAFET Y VEST Highly visible vest features 5-point tear away panels for safety. P/N: 36777-00 (large) P/N: 36778-00 (xlarge) P/N: 36779-00 (xxlarge) ISEA 107-2004

888.625.4520

CE EN397:1995 CLASS EG & C CE EN1663B CE EN352-3:1997

V IBR AT ION-REDUCING SPOR T/L ANDSCAPE GLOVES Premium, padded-leatherpalm gloves help reduce vibration. Also feature form fitting fingers and Velcro速 -type wrist band for tight fit. P/N: 31299-00 (large) P/N: 31300-00 (xlarge)

WARRANTY COVERAGE CURRENT MODELS

1 of 2

U.S. and Canada – (Purchase made after Jan. 1, 2013) PRODUCT

ECHO BEAR CAT WARRANTY CHIPPER/SHREDDER

MODEL

ENGINE

SC2170

COMMERCIAL

RENTAL

Subaru 170cc

N/A

SC3206

Briggs & Stratton 205cc

N/A

SC3265

Subaru 265cc

SC3305

Briggs & Stratton 305cc

SC3305E

Briggs & Stratton 305cc

SC3342

Briggs & Stratton 342cc

SC5540 SC5540B SC5720B

CONSUMER

3 years

PARTS

LABOR

YES

1 year

6 months

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

3 years

1 year

6 months

YES

N/A Subaru 720cc

CHIPPERS MODEL

ENGINE

CH4400

Subaru 404cc

CH45540 CH5540 CH5540H

N/A

CH500H CH800H CH5653

Subaru 653cc

CH611DH

Kubota 1.1 L

CH6730H

Kohler 730cc

CH8720iH

Subaru 720cc

CH8993H

Briggs & Stratton 993cc

CH8540 CH9540H

N/A

CHF9540H CH911DH

Kubota 1.1 L

CH922DH

Kubota 2.2 L

WHEELED TRIMMERS MODEL

ENGINE

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

Briggs & Stratton 190cc

3 years

1 year

6 months

YES

WT190 WT190T WT190S

www.bearcatproducts.com

WARRANTY COVERAGE CURRENT MODELS

2 of 2

U.S. and Canada – (Purchase made after Jan. 1, 2013) PRODUCT

ECHO BEAR CAT WARRANTY DEBRIS LOADERS

MODEL

ENGINE

DL8390

Honda 390cc

DL10570

Briggs & Stratton 570cc

DL12653

Subaru 653cc

DL12720

Subaru 720cc

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

3 years

1 year

6 months

YES

STUMP GRINDERS MODEL

ENGINE

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

SG340

Honda 340cc

3 years

1 year

6 months

YES

MODEL

ENGINE

WHEELED VACUUMS WV190 WV190S WV160 WV160S

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

3 years

1 year

6 months

YES

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

3 years

1 year

6 months

YES

Briggs & Stratton 190cc

Honda 160cc

LOG SPLITTERS MODEL

ENGINE

LS22

Subaru 170cc

LS27

Subaru 210cc

3 YEAR WARRANTY: Valid on any ECHO Bear Cat product purchased after January 1, 2013. U.S. & Canada Only. “Consumer” defined as: complete unit for residential or non-income producing use. “Commercial” defined as: complete unit for commercial, institutional, agricultural, horticultural or income producing use. “Rental” defined as: complete unit for rental purposes to produce income. *Models SC2170, SC2206 & SC3206 are classified as Consumer grade products and will not qualify for warranty coverage if used for Commercial or Rental purposes. ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial number of the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest dealer.

888.625.4520

WARRANTY COVERAGE NON-CURRENT PRODUCTION

1 of 2

U.S. and Canada – (Non-current Production - Purchase made after Jan. 1, 2013) PRODUCT

ECHO BEAR CAT WARRANTY CHIPPER/SHREDDERS

MODEL

ENGINE

SC2206

Briggs & Stratton 190cc

SC3240, SC3240T

Honda 240cc

SC3270, SC3270T

Honda 270cc

SC5614

Honda 614cc

SC5670B

Honda 670cc

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

N/A

1 year

6 months

YES

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

3 years

1 year

6 months

YES

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

3 years

1 year

6 months

YES

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

3 years

1 year

6 months

YES

3 years

CHIPPERS MODEL

ENGINE

CH45342

Briggs & Stratton 342cc

CH45390

Honda 390cc

CH45540

N/A

CH4614

Honda 614cc

CH4540

N/A

CH6614, CH6614H

Honda 614cc

CH6670H

Honda 670cc

CH6993H

Briggs & Stratton 993cc

CH8670H

Honda 670cc

CH123DH

Kubota 3 L

WHEELED TRIMMERS MODEL

WT160T WT160S

ENGINE

Honda 160cc

WT24 WT24T

Subaru 190cc

WT24S WT190SE

Briggs & Stratton 190cc Elec. Start DEBRIS LOADERS

MODEL

ENGINE

DL12670

Honda 670cc

DL12725

Kohler 725cc

www.bearcatproducts.com

WARRANTY COVERAGE NON-CURRENT PRODUCTION

2 of 2

U.S. and Canada – (Non-current Production - Purchase made after Jan. 1, 2013) PRODUCT

ECHO BEAR CAT WARRANTY WHEELED VACUUMS

MODEL

WV179 WV179S

ENGINE

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

Kawasaki 179cc

3 years

1 year

6 months

YES

COMMERCIAL

RENTAL

PARTS

LABOR

N/A

1 year

6 months

YES

LOG SPLITTERS MODEL

ENGINE

LS21E

1.5 hp single phase electric

LS21

Subaru 190cc

LS21160, LS21160T

Honda 160cc

LS27270, LS27270T

Honda 270cc

LS33340, LS33340T

Honda 340cc

CONSUMER

3 years

888.625.4520

WARRANTY COVERAGE CURRENT MODELS

1 of 2

All areas Outside the U.S. and Canada PRODUCT

ECHO BEAR CAT WARRANTY CHIPPER/SHREDDER

MODEL

ENGINE

SC2170

COMMERCIAL

RENTAL

Subaru 170cc

N/A

SC3206

Briggs & Stratton 205cc

N/A

SC3265

Subaru 265cc

SC3305

Briggs & Stratton 305cc

SC3305E

Briggs & Stratton 305cc

SC3342

Briggs & Stratton 342cc

SC5540 SC5540B SC5720B

CONSUMER

2 years

PARTS

LABOR

YES

1 year

6 months

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

2 years

1 year

6 months

YES

N/A Subaru 720cc

CHIPPERS MODEL

ENGINE

CH4400

Subaru 404cc

CH45540 CH5540 CH5540H

N/A

CH500H CH800H CH5653

Subaru 653cc

CH611DH

Kubota 1.1 L

CH6730H

Kohler 730cc

CH8720iH

Subaru 720cc

CH8993H

Briggs & Stratton 993cc

CH8540 CH9540H

N/A

CHF9540H CH911DH

Kubota 1.1 L

CH922DH

Kubota 2.2 L

WHEELED TRIMMERS MODEL

ENGINE

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

Briggs & Stratton 190cc

2 years

1 year

6 months

YES

WT190 WT190T WT190S

www.bearcatproducts.com

WARRANTY COVERAGE CURRENT MODELS

2 of 2

All areas Outside the U.S. and Canada PRODUCT

ECHO BEAR CAT WARRANTY DEBRIS LOADERS

MODEL

ENGINE

DL8390

Honda 390cc

DL10570

Briggs & Stratton 570cc

DL12653

Subaru 653cc

DL12720

Subaru 720cc

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

2 years

1 year

6 months

YES

STUMP GRINDERS MODEL

ENGINE

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

SG340

Honda 340cc

2 years

1 year

6 months

YES

MODEL

ENGINE

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

2 years

1 year

6 months

YES

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

2 years

1 year

6 months

YES

WHEELED VACUUMS WV190 WV190S WV160 WV160S

Briggs & Stratton 190cc

Honda 160cc

LOG SPLITTERS MODEL

ENGINE

LS22

Subaru 170cc

LS27

Subaru 210cc

NOTE: “Consumer” defined as: complete unit for residential or non-income producing use. “Commercial” defined as: complete unit for commercial, institutional, agricultural, horticultural or income producing use. “Rental” defined as: complete unit for rental purposes to produce income. *Models SC2170, SC2206 & SC3206 are classified as Consumer grade products and will not qualify for warranty coverage if used for Commercial or Rental purposes. ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial number of the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest dealer.

888.625.4520

WARRANTY COVERAGE NON-CURRENT MODELS

1 of 2

All areas Outside the U.S. and Canada PRODUCT

ECHO BEAR CAT WARRANTY CHIPPER/SHREDDERS

MODEL

ENGINE

SC2206

Briggs & Stratton 190cc

SC3240, SC3240T

Honda 240cc

SC3270, SC3270T

Honda 270cc

SC5614

Honda 614cc

SC5670B

Honda 670cc

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

N/A

1 year

6 months

YES

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

2 years

1 year

6 months

YES

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

2 years

1 year

6 months

YES

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

2 years

1 year

6 months

YES

2 years

CHIPPERS MODEL

ENGINE

CH45342

Briggs & Stratton 342cc

CH45390

Honda 390cc

CH45540

N/A

CH4614

Honda 614cc

CH4540

N/A

CH6614, CH6614H

Honda 614cc

CH6670H

Honda 670cc

CH6993H

Briggs & Stratton 993cc

CH8670H

Honda 670cc

CH123DH

Kubota 3 L

WHEELED TRIMMERS MODEL

WT160T WT160S

ENGINE

Honda 160cc

WT24 WT24T

Subaru 190cc

WT24S WT190SE

Briggs & Stratton 190cc Elec. Start DEBRIS LOADERS

MODEL

ENGINE

DL12670

Honda 670cc

DL12725

Kohler 725cc

www.bearcatproducts.com

WARRANTY COVERAGE NON-CURRENT MODELS

2 of 2

All areas Outside the U.S. and Canada PRODUCT

ECHO BEAR CAT WARRANTY WHEELED VACUUMS

MODEL

WV179 WV179S

ENGINE

CONSUMER

COMMERCIAL

RENTAL

PARTS

LABOR

Kawasaki 179cc

2 years

1 year

6 months

YES

COMMERCIAL

RENTAL

PARTS

LABOR

N/A

1 year

6 months

YES

LOG SPLITTERS MODEL

ENGINE

LS21E

1.5 hp single phase electric

LS21

Subaru 190cc

LS21160, LS21160T

Honda 160cc

LS27270, LS27270T

Honda 270cc

LS33340, LS33340T

Honda 340cc

CONSUMER

2 years

888.625.4520

BELT REFERENCE GUIDE Part Number

Models

Area Used

12106

Belt, 3V670 Kevlar

72085, 72285, 72385 (SN =>21300), 75011, 75111

12119

Belt, 2RB65

73525

Drive

12273

Belt, 3B90 Banded

CH922DH (74950)

Drive

12317

Belt, 4L 53

73040, 73050, 73450, 74040, 74450, 74455, 74050, 74060, 74065, 75065, 76065, WT160, WT160T, WT190, WT190T

Drive

12365

Belt, 3VX530

73710, SG340 (73711)

Drive

12573

Belt, 3L x 52 Kevlar

73150, 73350, 73265, 73455, 75365, WT160S, WT190S, WT190SE

Drive

12660

Belt, 4L350

CH5540H (74554), 74624, 74520

16000

Belt, BX-65

70500

Drive

16043

Belt, 29”

CH6730H, CH6670H (76624) & CH6993H (76635)(SN>603143),

Pump

16043

Belt, 29”

SC3206 (70050) (SN>105334), SC3342 (75311) (Single Belt Drive SN<C03478), SC3305 (70080), SC3270E (70085), SC3240 (78380), 70180

Drive

16081

Belt, 27”

SC3206 (70050) (SN<105334)

Drive

16086

Belt, BX-49

70487

Drive

16347

Belt, 2B70 Banded

SC5614 (71020), 73413, 73420, 74520, 73120, 73125, 73725, 71014, DL12670 (75124), DL12720

Drive

16500

Belt, VGates 6958

71110, 71125

Drive

16559

Belt, 3B83 Banded

CH8720iH, CH6614 (71620), CH6614H (72620), CH911DH (72928), CH8670H (76824), CH8993H (76835), 71825, 72825, 74824,

Drive

16636

Belt, BX-43

CH9540H (72854), CHF9540H (76854)

Hyd Feed

16660

Belt, BX-38

CH911DH (72928) & CH922DH (74950)(VIN<5VJAA00118W000989), CH6614 (72620), 72825, 74824, 72942,

Hyd Feed

16691

Belt, 3VX500

71755

Drive

16787

Belt, 3B85 Banded

72942

Drive

16799

Belt, 2R3VX475 EL COG

71785

Drive

16911

Belt, 3V560

72085, 72285, 72385, 75011, 75111

16912

Belt, 3V600

72085, 72285, 72385 (SN<21300)

17055

Belt, BX-56 [Qty 2]

SC5540B (73454), CH5540H (74554), CH5540, SC5540 (70554), 70520

Drive

17558

Belt, 4L-38

70251, 70252

Drive

Belts, 29” (Matched set)

SC3265, SC3240 (70380), SC3240T (70580), 70385, SC3342 (Dual Belt Drive SN=>C03478)

13426-00

Belt, 2RBP56

SC5540B (73554)

Drive

13884-00

Belt, SP BEARVAC (3L32)

WV190S (75360) WV179S (77360), and WV160S (75350)

Drive

13973-00

Belt, 2RB63 Banded

SC5670B (75524)

Drive

14261-00

Belt, 3RB48 Banded

CH6730H, CH6993H (76635), CH611DH (76628), CH6670H (76624), 74628, 74624,

Drive

14770-00

Belt, 2RB61

CH4400, CH45342 (77412), CH45390 (77413)

Drive

14804-00

Belt, 5-5V750, Non Cog

CH123DH (7812086)

Drive

18093-00

Belt, 2RB47 [Qty 2]

CH45540 (77454)

Drive

17996

Description

Beater Bar

Hyd Feed

Drive Beater Bar

Dual Belt Drive

18277-00

BX44 Belt

CH8720iH, CH8670H (76824), CH8993H (76835)

Hydraulic

18531-00

BX30 Belt

CH911DH, CH922DH (VIN>5VJAA00178W001015)

Hydraulic

18633-00

BX33 Belt

CH611DH (76628)

Hydraulic

31460-00

Belt, 2BRP67

CH5653

Drive

31498-00

Belt, 2RB40

SC5720B

Drive

31995-00

Belt, 5L500 Wrapped Aramid

WT24, WT24S, WT24T

32124-00

Belt, 4L180

WT24S

32252-00

Belt, 3RB64

CH8540 (71854), CH9540H (72854), CHF9540H (76854)

Head Transmission Drive

www.bearcatproducts.com

ROTOR & CHIPPER/SHREDDER KITS SHREDDER KNIVES REPLACEMENT KITS All Kits contain knives, spacers, shafts, hardware and installation instructions Part Number

Description

Models

70316

Kit, Shredder Knives

70530, 70515, 70525

70972

Kit, Shredder Knives

SC5540 (70554), SC5614 (71020), SC5670B (75524), SC5540B (73554), 73525, 71014, 70520

70973

Kit, Shredder Knives (Wide body 3” SC models)

SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380), SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385, 70180

71381

Kit, Shredder Knives (Narrow body 3” SC models)

SC3206 (70050) - Serial # C03159 and below

75502-00

Kit, Shredder Knives

SC2206

77589-00

Kit, Shredder Knives (Narrow body 3” SC models)

SC3206 - Serial # C03478 and above

77613-00

Kit, Shredder Knives

SC5720B

77616-00

Kit, Shredder Knives

77618-00

Kit, Optional Additional Shredder Knives

SC2170

COMPLETE ROTOR REPLACEMENT ASSEMBLIES Part Number

Description

Models

70062

Replacement Rotor Assembly, 8 HP machines (SN 25659 and below) (Shredder kit not included)

SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380), SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385, 70180

70277

Replacement Rotor Assembly, 5 HP machines (SN 25659 and below) (Shredder kit not included)

SC3206 (70050)

70366

Replacement Rotor Assembly, 5” Chipper/Shredders (SN 26377 and below) (Shredder kit not included)

SC5540 (70554), SC5540B (71020), 71014, 70500

73371-00

Replacement Rotor Assembly, 5” Chipper/Shredders

SC5670B (75524), SC5540B (73554), 73525

74209-00

Rotor Replacement Assembly, 3” Chipper/Shredders (Wide body models)

SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380), SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385, 70180

75399-00

Rotor Replacement Assembly

SC2206

77591-00

Rotor Replacement Assembly

SC3206

77612-00

Rotor Replacement Assembly

SC5720B

77615-00

Rotor Replacement Assembly

SC2170

888.625.4520

BLADE KITS KITS CONTAIN ALL NECESSARY BLADES AND HARDWARE 1 of 2 MODELS

SN RANGE

VIN RANGE

KIT P/N

DESCRIPTION

0 - Current

70317

Small Chipper Blade Kit

0 - 25658*

70205

Single Edge Small Blade Kit

70738

Tool Steel Blade Kit

76295-00

Chipper Blade Kit

72493

Chipper Blade Kit

3" CHIPPER/SHREDDERS 70515, 70525, 70530

SC2170, SC2206, SC3206 (70050), SC3265, SC3305 (70080), SC3305E (70085), SC3270 (70380), SC3270T (70580), SC3342 (75311), SC3240, 70385, 70030, 72085, 72285, 70180

25659 - Current

5VJAA00137W000009 Current

4" & 5" CHIPPERS CH4400

CH5653, CH5540, CH4540 (73454), CH5540H (74554), CH500H (74500), 73413

CH4614 (73420)

0 - Current

0 - 705078

5VJAA00197W000009 - Current 4.5" CHIPPERS

CH45342 (77412), CH45540 (77454), CH450H, CH45390 (77413)

0 - 902474

0 - 5VJAA00109W001849

74744-00

77412/13 Blade Kit

902475 - Current

5VJAA00109W001850 - Current

76295-00

4-1/2 Chipper Blade Kit

70453

Single Edge Blade Kit

72493

Chipper Blade Kit

0 - 5VJAA00159W001743

74220-00

6 Inch Blade Kit

5VJAA00159W001744 - Current

76293-00

Chipper Blade Kit

5VJAA00157W000010 - Current

71426

8 Inch Chipper Blade Kit

5" CHIPPER/SHREDDERS 0 - 26376* SC5540 (70554), SC5614 (71020), SC5540B (73554), SC5670B (75524), SC5720B, 70500, 70520, 71014, 74520, 73525

26377 - Current

5VJAA00137W000071 - Current

6" CHIPPERS CH6730H, CH6670H (76624), CH611DH (76628), CH6993H (76635), 74624, 74628 CH6614 (71620), CH6614H (72620)

0 - 704809

0 - 705118

www.bearcatproducts.com

BLADE KITS KITS CONTAIN ALL NECESSARY BLADES AND HARDWARE 2 of 2 MODELS

SN RANGE

VIN RANGE

KIT P/N

DESCRIPTION

71426

8 Inch Chipper Blade Kit

76293-00

Chipper Blade Kit

71426

8 Inch Chipper Blade Kit

0 - 901387

71426

8 Inch Chipper Blade Kit

901388 - Current

76293-00

Chipper Blade Kit

502304 - Current

74830-00

Blade Kit

0 - 5VJAA00109W001785

71426

8 Inch Chipper Blade Kit

5VJAA00109W001786 - Current

76293-00

Chipper Blade Kit

73900-00

12" Blade Kit

71445

4 Blade Stump Cutter Kit

76292-00

12 Blade Cutter Replacement Kit

0 - Current

76903-00

12 Blade Cutter Retro Fit Kit (To change from 4 blade to 12 blade system)

0 - Current

12 Blade Cutter Upgrade Kit 76906-00 (To change from 6 bolt to 12 bolt system)

8" CHIPPERS CH8720iH, CH8993H (76835), CH8670H (76824)

0 - 704960

0 - 5VJAA00119W001755 5VJAA00119W001756 - Current

904473 - Current 74824, CH800H (74800) 0 - 804669 8" & 9" PTO CHIPPERS CH8540 (71854), CH9540H (72854) CHF9540H (76854)

9" CHIPPERS 0 - 704696 CH911DH (72928), CH922DH (74950)

12" CHIPPERS CH123DH (7812086)

500423 - Current

5VJAA00137W000023 - Current STUMPGRINDERS

SG340 (73711), 71755, 71785, 73710

0 - 805549

SG340

810639 - Current

73711 with 12-blade retrograde fit kit, PN: 76256-00

0 - Current

SG340

888.625.4520

ACCESSORIES Blades and Knives Kits

Blade Kit, P/N: 70738 Models: SC2170, SC3206, SC3265, SC3305 SC3305E & SC3342

Blade Kit, P/N: 76293-00 Models: CH611DH, CH6730H, CH8720iH, CH8993H, CH911DH, CH922DH, CH8540, CH9540H & CHF9540

Blade Kit, P/N: 72493 Models: SC5720B, SC5540, SC5540B, CH5653, CH5540H & CH5540

Shredder Knives Kit P/N: 70972. Models: SC5540 & SC5540B.

Blade Kit, P/N: 76295-00 Models: CH4400, CH45540 & CH450H

Shredder Knives Kit P/N: 77616-00. Model: SC2170. Additional Knives Kit, P/N: 77618-00 www.bearcatproducts.com

ACCESSORIES Blades and Knives Kits

3" SC Screens

See model page for specific corresponding part numbers.

Coarse Screen Standard

Fine Screen

Medium Screen

Wet Debris Screen

Shredder Knives Kit P/N: 77613-00. Model: SC5720B

SC2170 Screens

See model page for specific corresponding part numbers. Wet 1.13" Standard .75" Fine Debris

Shredder Knives Kit P/N: 77589-00. Model: SC3206

Shredder Knives Kit, P/N: 70973 Models: SC3265, SC3305, SC3305E & SC3342

888.625.4520

Debris Bag, P/N: 17854 Models: Any models that discharge to the ground

ACCESSORIES

Blower Kit with 2-Blade Radial Fan P/N: 70251, Models: SC3265, SC3305, SC3305E & SC3342

All Weather Cover, P/N: 70093 Models: All 3" Chipper/Shredders

Two Wheel Tow Kit, P/N: 77000-00 Models: All 3" Chipper/Shredders

Leaf Tamper, P/N: 70089 Models: All 3" Chipper/Shredders

Supplemental Adaptor Kit (For Models Serial C03477 & below) Wide Body Models P/N: 77700-00 SC3206 P/N: 77701-00

Pintle Hitch, P/N: 14900-00 Models: CH611DH, CH6730H, CH8720iH & CH8993H

Road Towable Chipper/Shredder Trailer, P/N: 77353-00 Models: All 3" Chipper/Shredders

www.bearcatproducts.com

ACCESSORIES

4.5" x 4.5" (11.4cm x 11.4cm) Discharge Chute P/N: 74634-00. Models: CH4400, CH450H & CH45540

Low Profile Discharge, P/N: 74581-00 Models: CH8540, CH8720iH, CH8993H, CH911DH, CH922DH, CH9540H & CHF9540H

Hour Meter Kit - Diesel, P/N: 71921 Models: CH911DH & CH922DH

Adjustable Feed Speed Kit, P/N: 76820-00 Models: CH611DH & CH6730H

Hour/Tach Kit - Gas, P/N: 31605-00 Models: All gasoline engine powered machines

12 Tooth Cutter Replacement Kit P/N: 76292-00. Model SG340

888.625.4520

ACCESSORIES

Fenders & Tail Lights Kit P/N: 77510-00. Models: LS22 & LS27

Quick Split Kit P/N: 75896-00. Models: LS22 & LS27

4-Way Wedge P/N: 77514-00. Models: LS22 & LS27

Log Cradle P/N: 77189-00. Models: LS22 & LS27

www.bearcatproducts.com

ACCESSORIES

.130" diameter line Round, 10 pk. P/N: 72777

14" Sabre Tooth Blade Saplings up to 4" (10cm) in diameter P/N: 74548-00

14" Triple Blade Brush Cutter P/N: 32086-00

Round, 1 lb. donut P/N: 12388 Square, 10 pk. P/N: 72778 Square, 1 lb. donut P/N: 12389

Nylon Blade Kit P/N: 73060 .155" diameter 10 Pack 20" pre-cut length, P/N: 32029-00 .175" diameter 10 pack 20" pre-cut length, P/N: 32031-00

.155" diameter line Round, 10 pk. P/N: 72780

Proline Head P/N: 74891-00

Round, 1 lb. donut P/N: 12390 Square, 10 pk. P/N: 72779 Square, 1 lb. donut P/N: 12391 .155" diameter Round 10 Pack 20" pre-cut length, P/N: 32030-00 Heat-treated Mow Ball P/N: 72704-12

888.625.4520

ACCESSORIES

Vacuum Hose Kit P/N: 73606-00. Models: WV190 & WV190S

Debris Bag P/N: 31339-00. Models: WV190 & WV190S

Caster Wheel Kit P/N: 76967-00. Models: All Wheeled Vacuums

Swing Away Hitch Mount Kit P/N: 75739-00. Models: DL8390 & DL10570

Nozzle Wear Plate P/N: 73640-00. Models: All Wheeled Vacuums

Vacuum Liner P/N: 76466-00. Models: All Wheeled Vacuums

Tailgate Adapter Kit P/N: 75753-00. Models: DL8390 & DL10570

www.bearcatproducts.com

ACCESSORIES

4' (1.2m) Flexible Chute Extension P/N: 74737-00. Models: All Debris Loaders

Debris Loader Light Kit P/N: 77105-00. Models: DL12653 & DL12720

Wear Liner Replacement Kit P/N: 75768-00. Models: DL8390 & DL10570

16" (41cm) Vertical Chute Extension, P/N: 75888-00 Models DL8390, DL10570, DL12653 & DL12720

To view a complete list of ECHO Bear Cat parts and accessory options, please visit our website

www.bearcatproducts.com

Wear Liner Replacement Kit P/N: 77073-00. Models: DL12653 & DL12720

888.625.4520

and click on Options and Accessories under the Products tab.

P.O. Box 849 West Fargo, ND 58078-0849 Phone: 1.701.282.5520 Fax: 1.701.282.9522 Toll Free: 1.888.625.4520 Email: sales@bearcatproducts.com Web: www.bearcatproducts.com ECHO Bear Cat • 237 12th St. NW, West Fargo, ND 58078 Specifications, descriptions and illustrative material in this literature is as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories and may not include all standard equipment ©2014 ECHO Bear Cat, a subsidiary of ECHO Incorporated All Rights Reserved. #32968-00 - Updated 10/2013