2012 Exmark Full Product Info Guide

Exmark,® Exmark Parts Plus,® Lazer Z,® Metro,® Navigator,® Quest,® Turf Tracer,® Vantage™ and and Viking™ are UltraVac ® are registered trademarks, and CustomRide™, Micro-Mulch™, trademarks of Exmark Mfg. Co., Inc. Kohler ® is a registered trademark, and Kohler ® Command™ is a trademark of Kohler Co. Kawasaki® is a registered trademark of Kawasaki Motors Corp. Turf Mate,® Multi-Trac,® Turf Saver® and Turf Master® are registered trademarks of Carlisle Tire & Rubber Co. Honda ® is a registered trademark of American Honda Motor Co., Inc. Kubota® is a registered trademark of Kubota Engine America Corp.

2012

PRODUCT INFORMATION GUIDE

Exmark Mfg. Co., Inc. • 2101 Ashland Avenue • P.O. Box 808 Beatrice, NE 68310-0808 Call (402) 223-6300 • Fax (402) 223-6384

Check us out on the Web:

www.exmark.com

Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features.

We reserve the right to improve our products and make changes in specifications, designs and standard equipment without notice and without incurring obligation. Printed in the U.S.A. 2012.

Form No. 116-6521

Overnight or Free Replacement Parts Guarantee Get the parts your customers need overnight, with the Exmark速 Parts Plus 速 program.

See your Exmark Parts Policy Guide for further details and restrictions.

100

1

EXMARK TABLE OF CONTENTS

Parts Plus®........................................Inside Front Cover UltraCut™ Series 6 Deck.......................................... 4-5 Series 5 Deck.............................................................. 6-7 UltraCut Series 4 Deck............................................. 8-9 UltraCut Series 3 Deck...........................................10-11 UltraCut Series 2 Deck........................................... 12-13 Series 1 & Series 2 Deck.........................................14-15 Spindle Design & Construction.............................16-19 Cutting Blades....................................................... 20-23 Lazer Z® DS-Series................................................ 24-27 Lazer Z X-Series...................................................... 28-31 Lazer Z S-Series...................................................... 32-35 Lazer Z E-Series ..................................................... 36-39 Navigator ®.............................................................40-43 Pioneer ® S-Series.................................................. 44-47 Pioneer E-Series..................................................... 48-51 Quest® S-Series.................................................... 52-55 Quest E-Series........................................................ 56-59 Vantage®...............................................................60-63 Eco-Friendly........................................................... 64-65 Turf Tracer ®X-Series.............................................. 66-69 Turf Tracer S-Series................................................ 70-73 Viking™ Hydro........................................................74-77 Metro®................................................................... 78-81 Metro 26................................................................. 82-83 Commercial 21 X-Series........................................ 84-85 Commercial 21 S-Series........................................ 86-87 Turf Management Products.................................. 88-93 Rider & Stand-On Accessories Chart................... 94-95 Walk-Behind Accessories Chart............................ 96-97 Operator Comfort.................................................. 98-99 Custom Ride Seat Suspension System.......................98 Tilt Frame & 3-D Isolation System Kit........................99 Full-Suspension Seat....................................................99

12-Volt Power Adapter...............................................100 Anti-Scalp Roller Kits.................................................100 Equipment Cover.......................................................100 Extended Driver Lever Kit.........................................101 Hitch Kits....................................................................101 Hydro Maintenance Kit..............................................101 Premium Hydro Oil....................................................102 Premium Engine Oil...................................................102 Premium Fuel Treatment...........................................102 Jack & Receiver..........................................................103 Light Kit......................................................................103 Non-Powered Bagger................................................104 Operator Controlled Discharge................................104 Power Deck Lift..........................................................105 Sun Shade..................................................................105 Trash Container..........................................................105 Turf Striping Kit...................................................106-107 Navigator Accessories....................................... 108-109 3-Bushel Bagger........................................................ 110 StandOn..................................................................... 110 Walk-Behind Weight Set............................................ 111 Metro 26 Accessories................................................ 111 Commercial 21 Accessories................................112-113 UltraVac ® Commercial Collection System........ 114-121 Micro-Mulch Accessory...................................... 122-123 2012 Exmark Mulch Kit Chart.............................124-125 Rider Productivity Chart.....................................126-127 Engine Specifications.........................................128-129 Horse Power Rating System......................................130 Model Number Cross Reference Chart.................... 131 Warranty Information.................................................132 Model Year and Serial Number Charts....................133 Exmark Technical Support........................................133

EXMARK SERIES NAME CHANGE

2

exmark.com

3

ULTRACUT SERIES 6

C

™

K

™

D

E I B

J A

Standard on Lazer Z X-Series Models.

• 5.5" deck depth.

• No maintenance, sealed and non-greasable spindles; ........

7.75"-diameter cutter housing with 1.75"-diameter splined .. blade driver and 30mm (1.18" ) diameter spindle shaft. ®

• Patented spherical bearing design on idler arm pivots ..... requires only annual greasing.

• Coned anti-scalp rollers.

4

L

ULTRACUT SERIES 6

M O

H

F

G

ULTRAcUT Series 6 Features B. 5.5" deck depth. 4-point suspension.

Full-floating.

B. (3) 7-gauge steel reinforcement rings at spindle mounting area on 48," 52," 60" & 72."

C. High-strength polymer belt covers.

D Coned anti-scalp rollers.

E. 10-gauge steel top.

F. 7-gauge steel side skirt.

G. Heavy-duty trim side wear guard excludes 48" models.

H. No maintenance spindles and sealed and nongreasable. 7.75" diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft.

I. 18,500 fpm blade tip speed.

J. Patented flow-control baffles.

K. Patented spherical bearing design on idler arms requires only annual greasing.

L. No-maintenance, sealed ball bearings.

M. Flexible discharge chute reduces impact damage of trees and other obstacles.

5

SERIES 5

SERIES 5

M

N

E

L

F K

O

G H

C

B

A D

Standard on Lazer Z DS-Series Models.

• 6.0" deck depth.

• 10-gauge top reinforcement plate and 7-gauge reinforcement rings.

• No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft. ®

6

• Patented flow-control baffles.

• Adjustable discharge baffle.

• Coned anti-scalp rollers.

I

J

Series 5 Features

A. .6.0" deck depth. 4-point suspension. Full-floating.

B. 10-gauge top reinforcement plate and (3) 7-gauge steel reinforcement rings at spindle mounting area.

C. No maintenance spindles and sealed and nongreasable. 7.75" diameter cutter housing with 1.75" diameter splined blade driver and 30mm (1.18") diameter spindle shaft.

D. Adjustable front blow-out/vacuum baffle.

E. Adjustable discharge baffle.

F. Metal belt covers.

G. Coned anti-scalp rollers.

H. 10-gauge steel top.

I. 7-gauge steel side skirt.

J. Heavy-duty trim side wear guard

K. Patented flow-control baffles.

L. Patented spherical bearing design on idler arms requires only annual greasing.

M. .Flexible discharge chute reduces impact damage of trees and other obstacles.

N. 18,500 fpm blade tip speed.

O. .No-maintenance, sealed ball bearings.

7

ULTRACUT SERIES 4

J

™

I

M

B H

G

F D

A C

Standard on Lazer Z S-Series, Lazer Z E-Series, PIoneer S-Series 60", Turf Tracer X-Series and Vantage 48," 52" & 60" models.

• 5.5" deck depth.

• Three large, formed and welded 7-gauge steel reinforcement rings on top of 60" & 72" decks provide superior strength and durability excludes LZE 48" & 52" models.

• Lazer Z S-Series, Pioneer S-Series, & Vantage - No maintenance, sealed and non-greasable spindles.

7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver. ®

®

®

Turf Tracer X-Series - No maintenance, sealed and nongreasable spindles. 5.40"-diameter cutter housing with 1.75" diameter splined blade driver and 1.0" diameter spindle shaft.

• Patented spherical bearing design on idler-arm pivots requires only annual greasing.

• No-maintenance, sealed ball bearings.

8

™

K

ULTRACUT SERIES 4

L

E

ULTRACUT Series 4 Features

A. 5.5" deck depth. 4-point suspension. Full-floating.

B. 10-gauge steel top.

C. 7-gauge steel side skirt.

D. (3) 7-gauge steel reinforcement rings at spindle mounting area excludes LZE 48" & 52" models.

E. Heavy-duty trim side wear guard excludes 48" models.

F. Lazer Z S-Series, Lazer Z E-Series, Pioneer S-Series, & Vantage - No maintenance spindles and sealed and nongreasable. 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver.

Turf Tracer X-Series - No maintenance, sealed and nongreasable spindles. 5.40"-diameter cutter housing with 1.75"-diameter splined blade driver and 1.0"-diameter spindle shaft.

G. 18,500 fpm blade tip speed.

H. Patented flow-control baffles.

I. Patented spherical bearing design on idler arms requires only annual greasing.

J. High-strength polymer belt covers.

K. No-maintenance, sealed ball bearings.

L. Flexible discharge chute reduces impact damage of trees and other obstacles.

M. Round anti-scalp rollers.

9

ULTRACUT SERIES 3 ™

H

G

F

D

A

Standard on Pioneer S-SEries 44," 48" & 52" And Vantage 36" model.

• 5.0" deck depth provides Exmark's signature cut.

• Sealed, greaseless spindles require no maintenance year-round.

• 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver.

• 10-gauge steel reinforcement plate on Vantage 36" ®

™

I

B K

ULTRACUT SERIES 3

J

E C

ULTRACUT Series 3 Features

®

Standard on Turf Tracer S-Series model.

• 5.0" deck depth delivers unmatched cut quality.

• Sealed, greaseless spindles require no maintenance year-round.

• 5.40"-diameter cutter housing with 1.75"-diameter splined blade driver and 1.0" diameter spindle.

• 7-gauge steel reinforcement rings at spindle mounting area.

C. 7-gauge steel side skirt.

D. 7-gauge steel reinforcement rings at spindle mounting excludes Pioneer S-Series and Vantage 36" model.

E. Pioneer S-Series 44," 48" & 52" and Vantage 36" - 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver.

®

Standard on Viking 48" and metro 48" models.

• 5.0" deck depth, adjusts providing flexibility for varying cutting heights.

• Sealed, greaseless spindles.

• 5.40"-diameter cutter housing and 1.0"-diameter spindle tube.

• (3) 7-gauge steel reinforcement rings at spindle mounting area. ™

10

®

A. .5.0" deck depth. 4-point suspension. Full-floating.

B. 10-gauge steel top.

Turf Tracer S-Series - 5.40"-diameter cutter housing with 1.75"-diameter .splined blade driver and 1.0" diameter spindle.

Viking 48" and Metro 48" - 5.40"-diameter cutter housing and 1.0"-diameter spindle tube.

F. 18,500 fpm blade tip speed.

G. .Patented flow-control baffles.

H. High-strength polymer belt covers standard on Pioneer S-Series 48" & 52" models.

I. No-maintenance, sealed ball bearings.

J. Flexible discharge chute reduces impact damage of trees and other obstacles.

K. Round anti-scalp rollers.

11

ULTRACUT SERIES 2 ™

G

J

E D

F A

Standard on Pioneer E-Series model.

• 4.0" deck depth provides patented airflow technology.

• Sealed, greaseless spindles require no maintenance year-round. ®

• 7.50"-diameter cutter housing contains 17mm- (.67") diameter spindle shaft and hex blade driver.

Standard on Viking 36" and metro 32" & 36" models.

• 5.0" deck depth, adjusts providing flexibility for varying cutting heights.

• Sealed, greaseless spindles require no maintenance year-round.

• 5.40"-diameter cutter housing and 1.0"-diameter spindle tube.

• (2) 7-gauge steel reinforcement rings at spindle mounting area. ™

C

Series 2 Features

A. Pioneer E-Series - 4.0" deck depth. 4-point suspension.

Full-floating.

Viking 36" and Metro 32" & 36" - 5.0" deck depth. Rigid.

B. 10-gauge steel top.

C. Pioneer E-Series - 10-gauge steel side skirt.

D. Pioneer E-Series - 7.50"-diameter cutter housing contains 17mm- (.67") diameter spindle shaft and hex blade driver.

®

12

B

™

H

ULTRACUT SERIES 2

I

Viking 36" and Metro 32" & 36" - 7-gauge steel side skirt.

Viking 36" and Metro 32" & 36" - 5.40"-diameter cutter housing and 1.0"-diameter spindle tube.

E. 18,500 fpm blade tip speed.

F. Patented flow-control baffles.

G. High-strength polymer belt covers are standard on Pioneer E-Series.

H. No-maintenance, sealed ball bearings.

I. Flexible discharge chute reduces impact damage of trees and other obstacles.

J. Round anti-scalp rollers.

13

SERIES 1 & 2

SERIES 1 & 2

Standard ON Quest E-Series and Quest S-Series • 4.0" deck depth with top discharge design.

• Top discharge design enhances bagging performance.

• Sealed, greaseless spindles require no maintenance year-round.

• 5.50"-diameter cutter housing with 17mm-diameter spindle shaft. ®

• Easily removable for cleaning and service.

F

Series 1 Stamped Deck Features.

Standard on Quest E-Series.

A. 4.0"-deck depth. 3-point suspension. Floating.

B. 42" unit - 2 blade, 13-gauge stamped steel.

50" unit - 3 blade, 12-gauge stamped steel

C. Rolled deck edges for additional strength.

D. 5.50"-diameter cutter housing with 17mm-diameter spindle shaft. Sealed, greaseless spindle bearings require no maintenance year-round.

E. 18,500 fpm blade tip speed.

F. Composite discharge chute reduces impact damage of trees and other obstacles.

G. Round anti-scalp rollers.

H. Clean-out port.

B

D

H

C A

New for 2012

E

Series 2 Fabricated Deck Features.

Standard on Quest S-SEries.

E

G

A. 4.0"-deck depth. 3-point suspension. Floating.

B. 3 blade, 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded front bumper.

14

C. 5.50"-diameter cutter housing with 17mm-diameter spindle shaft. Sealed, greaseless spindle bearings require no maintenance year-round.

D. 18,500 fpm blade tip speed.

E. Composite discharge chute reduces impact damage of trees and other obstacles.

F. Round anti-scalp rollers.

G. Clean-out port.

F

B

D

C G

A

15

SPINDLE DESIGN & CONSTRUCTION

Standard on Lazer Z DS-Series & Lazer Z X-Series. ®

A. 7.75"-diameter cast aluminum spindle housing.

B. Double-rowed, dual triple lip seal, high-speed ball bearing assemblies, non-greasable.

C. 30 mm spindle shaft diameter at bearing.

D. Splined blade driver eliminates self tightening from impacts.

E. Spindle nut minimizes moisture from entering the spindle internals, retains bearing clamp load when servicing drive pulley.

F. Completely serviceable.

UltraCut™ Series 2, 3 & 4 Spindle Features Standard on Turf Tracer X-Series, Turf Tracer S-Series, Viking and Metro models. ®

™

®

A. 5.40"-diameter cast aluminum spindle housing.

B. Dual-sealed, high-speed bearing assemblies, non-greasable.

C. 1.0" spindle shaft diameter at bearing.

D. Splined blade drive eliminates self tightening from impacts excludes Viking and Metro models.

E. Spindle cap minimizes moisture from entering the spindle internals.

F. Spindle cavity is filled with grease to reduce condensation and moisture ingestion.

C

C

E A

E

A

SPINDLE DESIGN & CONSTRUCTION

Series 5 & UltraCut™ Series 6 Spindle Features

F B

B F

D D

16

17

SPINDLE DESIGN & CONSTRUCTION

Standard on Lazer Z S-Series, Lazer Z E-Series, Pioneer S-Series and Vantage models. ®

Standard on Pioneer E-Series. ®

A. 7.50"-diameter cast aluminum spindle housing.

®

B. Dual-sealed, high-speed bearing assemblies, non-greasable.

A. 7.75"-diameter cast aluminum spindle housing.

B. Dual-sealed, high-speed bearing assemblies, non-greasable.

.

C. 17mm diameter spindle shaft at bearing.

D. Hex blade driver eliminates self tightening from impacts.

C. 25 mm spindle shaft diameter at bearing.

D. Splined blade driver eliminates self tightening from impacts.

E. Spindle cap minimizes moisture from entering the spindle internals.

F. Spindle cavity is vented to reduce condensation and moisture ingestion.

C

C

E A

SPINDLE DESIGN & CONSTRUCTION

UltraCut™ Series 2 Spindle Features

UltraCut™ Series 3 & 4 Spindle Features

A F B

B

D D

18

19

Blade fit application chart

Revolutionary Cutting Design

Most mower blades utilize just the tips of each blade to cut grass.

Exmark’s blades feature a much longer, sharpened cutting surface for an enhanced quality of cut throughout a wider range of mowing conditions.

Exmark eXtreme 2 blades feature a revolutionary design. The angle of the cutting teeth redirects the airflow for improved wear and vacuum lift characteristics. The clippings remain in contact with the blade longer, resulting in a finer cut and a beautifully manicured appearance. ®

Part Number

Blade Type

Models

Size

32"

36"

103-6584

High Lift Notched Blade

MG, VH

18.00"

•

103-1578

High Lift Solid Blade

MG, VH

18.00"

•

103-6580

Low Lift Blade

MG, VH

18.00"

•

103-6582

Mulch Blade

MG, VH

18.00"

•

42"

44"

48"

116-5176

eXtreme 2 Blade

MG, VH

18.00"

103-6583

High Lift Notched Blade

MG, VH

16.25"

•

•

103-1577

High Lift Solid Blade

MG, VH

16.25"

•

• •

50"

52"

60"

•

103-6738

Low Lift Blade

MG, VH

16.25"

•

103-6581

Mulch Blade

MG, VH

16.25"

•

•

116-5178

eXtreme 2 Blade

MG, VH

16.25"

•

•

116-1037

High Lift Notched Blade

PNS

22.25"

•

116-1047

Mulch Blade

PNS

22.25"

•

103-6401

High Lift Notched Blade

TTS, VT, PNE, PNS

16.25"

103-6381

High Lift Solid Blade

TTS, VT, PNE, PNS

16.25"

•

103-6386

Low Lift Blade

TTS, VT, PNE

16.25"

•

Blade fit application chart

20

High-Performance Blades

•

103-6391

Mulch Blade

TTS, VT, PNS

16.25"

•

109-6389

Mulch Blade

PNE

16.25"

•

116-5177

eXtreme 2 Blade

TTS, VT, PNE, PNS

16.25"

103-6402

High Lift Notched Blade

TTX, TTS, VT, PNE, PNS

18.00"

•

•

103-6382

High Lift Solid Blade

TTX, TTS, VT, PNE, PNS

18.00"

•

•

103-6387

Low Lift Blade

TTX, TTS, VT, PNE

18.00"

•

•

103-6392

Mulch Blade

TTX, TTS, VT, PNS

18.00"

•

•

109-6390

Mulch Blade

PNE

18.00"

116-5175

eXtreme 2 Blade

TTX, TTS, VT, PNE, PNS

18.00"

103-6403

High Lift Notched Blade

TTX, PNS, VT

20.50"

103-6383

High Lift Solid Blade

TTX, PNS, VT

20.50"

•

103-6388

Low Lift Blade

TTX, PNS, VT

20.50"

•

•

• •

• •

103-6393

Mulch Blade

TTX, PNS, VT

20.50"

•

116-5174

eXtreme 2 Blade

TTX, PNS, VT

20.50"

•

110-6568

Standard Blade

QTE

21.60"

•

106-2247

Low Lift Blade

QTE

21.60"

•

106-2247

Mulching Blade

QTE

21.60"

•

115-5059

Standard Blade

QTE, QTS

17.50"

•

115-5062

Low Lift Blade

QTE, QTS

17.50"

•

115-5062

Mulch Blade

QTE, QTS

17.50"

•

21

BLADEfit FITapplication APPLICATIONchart CHART Blade

Blade Type

Models

Size

42"

48"

52"

60"

72"

103-4209

Left-Hand Blade

NV 42

22.00"

•

103-4210

Right-Hand Blade

NV 42

22.00"

•

103-9526

Left-Hand Mulch

NV 42

22.00"

•

103-9527

Right-Hand Mulch

NV 42

22.00"

•

103-4207

Left-Hand Blade

NV 48

25.00"

•

103-4208

Right-Hand Blade

NV 48

25.00"

•

103-9524

Left-Hand Mulch

NV 48

25.00"

•

103-9525

Right-Hand Mulch

NV 48

25.00"

•

103-6401

High Lift Notched Blade

LZX, LZS, LZE

16.25"

•

103-6381

High Lift Solid Blade

LZX, LZS, LZE

16.25"

•

103-6386

Low Lift Blade

LZX, LZS, LZE

16.25"

•

103-6391

Mulching Blade

LZX, LZS, LZE

16.25"

•

116-5177

eXtreme 2 Blade

LZX, LZS, LZE

16.25"

•

103-6402

High Lift Notched Blade

LZX, LZS, LZE

18.00"

•

103-6382

High Lift Solid Blade

LZX, LZS, LZE

18.00"

•

103-6387

Low Lift Blade

LZX, LZS, LZE

18.00"

•

103-6392

Mulching Blade

LZX, LZS, LZE

18.00"

•

116-5175

eXtreme 2 Blade

LZX, LZS, LZE

18.00"

•

103-6403

High Lift Notched Blade

LZX, LZS, LZE

20.50"

•

103-6383

High Lift Solid Blade

LZX, LZS, LZE

20.50"

•

103-6388

Low Lift Blade

LZX, LZS, LZE

20.50"

•

103-6393

Mulching Blade

LZX, LZS, LZE

20.50"

•

116-5174

eXtreme 2 Blade

LZX, LZS, LZE

20.50"

•

103-6404

High Lift Notched Blade

LZX, LZS

24.50"

•

103-6384

High Lift Solid Blade

LZX, LZS

24.50"

•

103-6389

Low Lift Blade

LZX, LZS

24.50"

•

103-6394

Mulching Blade

LZX, LZS

24.50"

•

116-5171

eXtreme 2 Blade

LZX, LZS

24.50"

•

109-6463

High Lift Notched Blade

LZDS

20.75"

•

109-6469

High Lift Solid Blade

LZDS

20.75"

•

103-8240

Low Lift Blade

LZDS

20.75"

•

109-5396

Mulching Blade

LZDS

20.75"

•

116-5499

eXtreme 2 Blade

LZDS

20.75"

•

109-6465

High Lift Notched Blade

LZDS

24.75"

109-6471

High Lift Solid Blade

LZDS

24.75"

•

103-9622

Low Lift Blade

LZDS

24.75"

•

109-5879

Mulching Blade

LZDS

24.75"

•

116-5501

eXtreme 2 Blade

LZDS

24.75"

•

Blade fit application chart

22

Part Number

•

23

Engine

Size

Deck

Weight

Length

LZDS902K6051

D902 Kubota® Diesel

60"

Series 5

1602 lbs

84.5"

72.7"

72.8"

61.4"

$

LZDS902K7251

D902 Kubota Diesel

72"

Series 5

1702 lbs

88.7"

72.7"

85.8"

74.3"

$

Height Defl. Down Defl. Up

Price

®

®

LAZER Z DS-SERIES

LAZER Z DS-SERIES

Width

Model Number

1

24

Available with 60"& 72" Series 5 cutting decks.

Design-engineered for the toughest mowing conditions:

• New and improved engine cooling system increases engine cooling efficiency and improves airflow through radiator in tough conditions.

• Newly improved engine isolation system, for better vibration reduction.

• Newly designed automatic PTO shutdown provides engine overheat protection.

• Utilizes large-capacity, 21cc Hydro-Gear® variable displacement pumps with shaft-mounted cooling fans.

• High-torque wheel motors provide increased performance.

• Heavy-duty tubular steel frame design for maximum durability.

Key Features

Lazer Z DS-Series available with a Kubota liquid-cooled diesel engine.

Additional features include:

• Large 26 x 12.0-12, 4-ply Multi-Trac® drive tires for optimum traction and mower stability.

• Large-diameter, 13 x 6.50-6 smooth-tread, semi-pneumatic, no-flat front caster tires for increased reliability and a smoother ride.

• Adjustable dampers allow the operator to customize drive responsiveness to suit personal preference.

• Heavy-duty canister air filtration system improves engine life, minimizes maintenance and boosts overall productivity.

• Standard full-suspension seat with armrests.

• Blade-tip speed approximately 18,500 fpm.

• The DS-Series models are B20 biodiesel-ready for lower emissions and reduced environmental impact.

Accessories & Attachments

Key Features

Units are carb-compliant.

See page 132 for Exmark® warranty details

Equipment Cover - Large (Does not fit 72")................. 116-1379 Hitch Kit.......................................................................... 103-9565 Jack ................................................................................. 116-1351 Jack Receiver.................................................................. 116-1571 Light Kit........................................................................... 116-1154 Mulching Kits................................................... See Page 124-125 Sun Shade....................................................................... 116-0513 Turf Striping Kit................................................See Page 106-107 Trash Container, 2.5-gallon capacity.................................. TC26 UltraVac® Collection Systems......................... See Page 114-121 For more information on Accessories see page 94-125

25

Notched Air Foil

60"

3

20.75"

109-6463 109-6469 103-8240

109-5396

116-5499

109-4199 1-633127

109-7582

72"

3

24.75"

109-6465

109-5879

116-5501

109-4199 1-643052

109-7582

Low Lift

109-6471 103-9622

Drive Wheels Pneumatic Tire Rim Only Tire Only Complete Rim Only Tire Only

Decks

Mule Drive

Blade Drive

Pump Drive

Assembly Complete

Semi-Pneumatic Tire Assembly Rim Only Tire Only

Complete

109-3156 103-4963

109-3157

n/a

1-523009

103-5188

n/a

n/a

109-9127

72"

109-3156 103-4963

109-3157

n/a

1-523009

103-5188

n/a

n/a

109-9127

Style – Series 5 cutting deck. Side-discharge standard with option to bag or mulch.

Widths Available – 60" and 72".

Deck Construction – 10-gauge top that is formed and continuously seam-welded, with 10-gauge top reinforcement plate, 7-gauge side skirt and 7-gauge reinforcement rings at spindle assembly. 6.0"-deep deck, 4-point suspension, full-floating deck with 6 adjustable, cone-shaped, anti-scalp rollers.

Cutting Height – 1.0" (2.5 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments and adjustable from operator’s seat.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75" diameter splined blade driver and 1.18" diameter spindle shaft.

Blade-Tip Speed – Approximately 18,500 fpm.

Tractor Frame – Welded, heavy-duty tubular steel.

Steering and Motion Control – Hydraulically dampened twin levers, adjustable fore and aft. Adjustable dampers (3 positions) to customize drive responsiveness. Also adjustable to 2-height positions.

Front Caster Tires – 13 x 6.50-6, smooth-tread, semi-pneumatic tires.

Equipment

Engine – D902 Kubota® 3-cylinder liquid-cooled diesel, governed to 3,850 rpm.

Air Filter – Heavy-duty canister air filtration system.

Drive System – Two Hydro-Gear® 21cc/rev pumps with integral SCR (System Check Relief) valves (in forward), powering two 18-cubicinch wheel motors with 1.25" (3.18 cm) diameter tapered shafts.

Hydro Fluid – Exmark Premium Hydro oil.

Speed – Infinitely variable speed selection from 0-12.0 mph (19.3 kmph) forward, 0-8.0 mph (12.9 kmph) reverse.

PTO Engagement – MagStop electromagnetic 250-ft-lb clutch with spot brake.

Fuel Capacity – 15.5-gallons (58.7-L) twin fuel tanks.

Drive-Wheel Release – Allows unit movement without engine running.

Safety Package – Operator Presence Controls (OPC) and drive system interlock.

Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.

Deck Lift - Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

Casters – 0.50" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.

Decks

60"

Cup Holder – Standard.

26

eXtreme 2 Mulching* Mulching

*Requires installation of Micro-Mulch accessory for proper mulching

®

LAZER Z DS-SERIES

Blade Length

®

Power Components

Solid Air Foil

Belts

# of Blades

LAZER Z DS-SERIES

Blades material is 0.20" thick alloy steel Deck Size

Drive Tires – 26 x 12.0-12, 4-ply Multi-Trac.® Turning Radius – True zero-turn.

Parking Brake – Lever-actuated drum and band integrated with transmission-neutral interlock.

Seat – Deluxe, two-tone, bolstered, full-suspension seat with Elastomeric Vibration Control material. Adjusts to individual operator weight and features padded, height-adjustable armrests. Hinged mounting.

Electrical – 12-volt battery with 60-amp alternator.

Engine Hourmeter – Standard.

Fuel Gauge – Standard.

Console Storage Compartment – Standard.

27

CV680 Kohler® Command™ 48" UltraCut™ Series 6

1125 lbs

79.2"

70.5"

59.6"

51.8"

$

LZX740KC526

CV740 Kohler Command

52" UltraCut Series 6

1116 lbs

79.2"

70.5"

64.8"

56.3"

$

LZX740KC606

CV740 Kohler Command

60" UltraCut Series 6

1195 lbs

83.1"

70.5"

72.8"

56.3"

$

LZX740KC606CA1 CV740 Kohler Command

60" UltraCut Series 6

1200 lbs

83.1"

70.5"

72.8"

56.3"

$

LZX749EKC606

ECV749 Kohler Command EFI 60" UltraCut Series 6

1212 lbs

83.1"

70.5"

72.8"

62.5"

$

LZX801KA606

FX801V Kawasaki® V-Twin

60" UltraCut Series 6

1212 lbs

83.1"

70.5"

72.8"

62.5"

$

LZX801KA606SS2 FX801V Kawasaki® V-Twin

60" UltraCut Series 6

1212 lbs

83.1"

70.5"

72.8"

62.5"

$

LZX940KC6062 CV940 Kohler Command

60" UltraCut Series 6

1260 lbs

83.1"

70.5"

72.8"

62.5"

$

LZX980KC6061,2 CV980 Kohler Command

60" UltraCut Series 6

1244lbs

83.1"

70.5"

72.8"

62.5"

$

LZX940KC7262

CV940 Kohler Command

72" UltraCut Series 6

1292 lbs

86.1"

70.5"

84.9"

73.5"

$

LZX980KC7261,2 CV980 Kohler Command

72" UltraCut Series 6

1276 lbs

86.1"

70.5"

84.9"

73.5"

$

Key Features

Units are carb-compliant

Weight

Price

2

Standard Full-Suspension Seat

Powered by Kohler Command, Kohler Command Electronic Fuel Injection, or Kawasaki V-Twin engines.

Available with 48," 52," 60" & 72" full-floating UltraCut Series 6 cutting decks.

Additional features include:

• Exmark exclusive Parker unitized 12 cc (48" & 52") and 16cc (60" & 72" ) pump and wheel motor system with no hoses, integrated cooling fans, and 1.7-quart integrated reservoir for improved performance and reduced maintenance.

• 24 x 9.5-12, 4-ply Multi-Trac® drive tires on 48" and 52" units and 24 x 12.0-12, 4-ply Multi-Trac drive tires on 60" and 72" units for optimum traction.

• Large-diameter 13 x 5.0-6 smooth-tread, semi-pneumatic, no-flat front caster tires on 48" and 52" units and 13 x 6.5-6 smooth-tread, semi-pneumatic, no-flat, front caster tires on 60" and 72" units for increased reliability.

• Welded, heavy-duty 1.5" x 3" tubular steel unibody for increased durability.

Key Features

1

Deck

• Heavy-duty canister air filtration system that improves engine life, simplifies maintenance and boosts overall productivity.

• Deluxe, two-tone, bolstered seat with Elastomeric

Vibration Control (EVC) material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion. Suspension seat standard on LZX801KA606SS, LZX940KC606, LZX940KC726, LZX980KC606 and LZX980KC726.

• High-capacity, 12-gallon, single fuel tank with single fill location to reduce your time at the gas pump.

• No routine grease points. Only 4 annual grease points.

Accessories & Attachments

®

LAZER Z X-SERIES

LZX680KC486

Size

®

Engine

LAZER Z X-SERIES

Width Length Height Defl. Down Defl. Up

Model Number

See page 132 for Exmark® warranty details

3-Bushel Bagger........................................................ GC3602 12 Volt Adapter........................................................109-9694 Extended Driver Lever Kit.......................................116-1065 Equipment Cover - Large (Does not fit 72")........... 116-1379 Jack........................................................................... 116-1351 Jack Receiver............................................................116-1049 Hitch Kit................................................................... 109-9487 Hydro Maintenance Kit............................................116-3270 Light Kit..................................................................... 116-1154 Mulching Kits............................................. See Page 124-125 Operator Controlled Discharge................................ OCD02 Power Deck Lift........................................................ 116-2517 Rear Anti-Scalp Kit - Fits 72".................................. 116-4607 Rear Anti-Scalp Kit - Fits 60"...................................116-4614 Sun Shade.................................................................116-0513 Trash Container, 2.5-gallon capacity............................ TC26 Turf Striping Kit.........................................See Page 106-107 UltraVac ® Collection Systems.................. See Page 114-121 Operator Comfort................................ Also Refer To 98-99 Standard Seat...........................................................116-4474 Custom Ride Seat Suspension................................ 116-0062 Full-Suspension Seat................................................116-7234 For more information on Accessories see page 94-125

28

29

Notched Air Foil

Solid Air Foil

Low Lift

Mulching*

48" 52" 60" 72"

3 3 3

16.25" 18.00" 20.50" 24.50"

103-6401 103-6402 103-6403 103-6404

103-6381 103-6382 103-6383 103-6384

103-6386 103-6387 103-6388 103-6389

103-6391 103-6392 103-6393 103-6394

®

3

eXtreme 2 Mulching

Hydraulic Drive

Blade Drive

116-5177 116-5175 116-5174 116-5171

109-3388 109-3388 109-3388 109-3388

109-8070 109-4994 109-8073 109-9023

*Requires installation of Micro-Mulch accessory for proper mulching

Decks

Style – Full-floating UltraCut™ Series 6 featuring a heavy-duty spindle. Side-discharge standard with the option to bag or mulch.

Widths Available – 48", 52", 60," and 72."

Semi-Pneumatic Tire Assembly Rim Only Tire Only Complete n/a n/a 109-9126 n/a n/a 109-9126 n/a n/a 109-9127 n/a n/a 109-9127

Deck Construction –10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting reinforcements for improved strength and reduced weight. 4-point suspension, full floating deck. 72" unit has 6 adjustable, cone-shaped, anti-scalp rollers. 60" unit has 4 adjustable, cone-shaped, anti-scalp rollers. 48" and 52" units have 3 adjustable, cone-shaped, anti-scalp rollers.

Cutting Height – 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft.

Blade-Tip Speed – Approximately 18,500 fpm.

Equipment

Power Components Decks

48" 52" 60" 72"

Drive Wheels Rim Only Tire Only Complete 109-3645 103-2771 109-3050 109-2875 103-2771 109-3247 109-2871 103-2744 109-3248 109-3156 103-2744 109-3158

®

Blade Length

Engine – CV680, CV740, CV940 & CV980 Kohler® Command™; ECV740 Kohler Command EFI; and FX801V Kawasaki® engines. All engines governed to 3,750 rpm.

Air Filter – Heavy-duty canister air filtration system.

Drive System – Two Exmark® exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components.

16 cc pumps and 17.1 cubic inch motors on 60" & 72" models.

12 cc pumps and 14.5 cubic inch motors on 48" & 52" models.

Hydro Fluid – Exmark Premium Hydro oil.

Speed – Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse on 60" & 72" models.

0–10.0 mph (16.0 kmph) forward, 0–6.0 mph (9.7 kmph) reverse on 48" & 52" models.

PTO Engagement – MagStop Electromagnetic 200-ft-lbs clutch with spot brake except CV940 & CV980 have 250-ft-lbs.

Fuel Capacity – High-capacity, 12-gallon (45.4-L), single fuel tank with single fill location.

Drive-Wheel Release – Allows unit movement without engine running.

Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.

Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.

Quick Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

Casters – .50" thick caster yoke arm..

Cup Holder – Standard.

30

Belts

Power Components

# of Blades

LAZER Z X-SERIES

LAZER Z X-SERIES

Blades material is 0.20" thick alloy steel Deck Size

Tractor Frame – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.

Steering and Motion Control – Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions.

Front Caster Tires – 13 x 6.5-6 smooth tread, semi-pneumatic tires on 60" & 72" models; 13 x 5.0-6 smooth tread, semi-pneumatic tires on 48" & 52".

Drive Tires – 24 x 9.5-12, 4-ply Multi-Trac® on 48" and 52" models.

24 x 12.0-12, 4-ply Multi-Trac on 60" & 72" models; Turning Radius – True zero-turn.

Parking Brake – Lever-actuated disc brake.

Seat – Deluxe, two-tone, bolstered seat (LZX801KA606SS, 940's and 980's have a full-suspension seat) with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.

Diagnostics – Operational diagnostics with integral fuel gauge. EFI unit has malfunction indication light (MIL).

Electrical – 12-volt battery with 15-amp alternator (EFI has 20-amp).

Engine Hourmeter – Standard.

31

LZS651KA484 LZS651KA484CA1 LZS680KC524 LZS691KA524CA1 LZS740KC524 LZS730EKC604 LZS740KC604 LZS740KC604CA1 LZS801PKA6041 LZS749EKC7241 LZS801KA724 LZS801PKA7241

FX651V Kawasaki® V-Twin FX651V Kawasaki V-Twin CV680 Kohler® Command™ FX691V Kawasaki V-Twin CV740 Kohler Command ECV730 Kohler Command EFI CV740 Kohler Command CV740 Kohler Command FX801V Kawasaki Propane EVC749 Kohler Command EFI FX801V Kawasaki V-Twin FX801V Kawasaki Propane

48" 48" 52" 52" 52" 60" 60" 60" 60" 72" 72" 72"

UltraCut™ Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series 4

Weight 1089 lbs 1089 lbs 1088 lbs 1088 lbs 1088 lbs 1133 lbs 1133 lbs 1133 lb 1316 lbs 1208 lbs 1208 lbs 1403 lbs

Width Length Height Defl. Down Defl. Up 79.2" 79.2" 79.2" 79.2" 79.2" 83.1" 83.1" 83.1" 83.1" 86.1" 86.1" 86.1"

70.0" 70.0" 70.0" 70.0" 70.0" 70.0" 70.0" 70.0" 70.0" 70.0" 70.0" 70.0"

59.6" 59.6" 64.8" 64.8" 64.8" 72.8" 72.8" 72.8" 72.8" 84.9" 84.9" 84.9"

51.8" 51.8" 56.3" 56.3" 56.3" 62.5" 62.5" 62.5" 62.5" 73.5" 73.5" 73.5"

Price $ $ $ $ $ $ $ $ $ $ $ $

are carb-compliant.

Powered by Kawasaki V-Twin, Kohler Command, Kohler Command Electronic Fuel Injection, and Kawasaki V-Twin with propane conversion.

Available with 48," 52," 60" & 72" full-floating UltraCut™ Series 4 cutting decks.

Additional features include:

• Exmark® exclusive Parker unitized 12 cc pump and wheel motor system with no hoses, integrated cooling fans, and 1.7-quart integrated reservoir for improved performance and reduced maintenance.

• Welded, heavy-duty 1.5" x 3" tubular steel unibody for increased durability.

• 23 x 9.5-12 Turf Master® drive tires (48" & 52") and 24 x 12.0-12 Turf Master drive tires (60" & 72") units for optimum traction.

Key Features

Key Features

1Units

Deck

• 13 x 5.0-6 smooth tread, semi-pneumatic front caster tires (48," 52" & 60") and 13 x 6.5-6 smooth-tread, semi-pneumatic front caster tires (72" & LZS740KC604) for increased reliability.

• Heavy-duty canister air filtration system that improves engine life, simplifies maintenance and boosts overall productivity.

• High-capacity, 12-gallon, single fuel tank with single fill location to reduce your time at the gas pump. 8-gallon, single fuel tank with single fill location on LZS740KC604.

• High-back, two-tone, bolstered seat with Elastomeric Vibration Control (EVC) material.

• No routine grease points. Only 4 annual grease points.

See page 132 for Exmark® warranty details

Accessories & Attachments

®

LAZER Z S-SERIES

Size

®

Engine

LAZER Z S-SERIES

Model Number

3-Bushel Bagger....................................................... GC3602 12 Volt Adapter....................................................... 109-9694 Extended Driver Lever............................................. 116-1065 Equipment Cover - Large (Does not fit 72")...........116-1379 Hitch Kit...................................................................109-9487 Hydro Maintenance Kit........................................... 116-3270 Jack...........................................................................116-1351 Jack Receiver........................................................... 116-1049 Light Kit.....................................................................116-1154 Mulching Kits.............................................See Page 124-125 Operator Controlled Discharge................................OCD02 Power Deck Lift........................................................116-2517 Rear Anti-Scalp Kit - Fits 72"..................................116-4607 Rear Anti-Scalp Kit - Fits 60".................................. 116-4614 Sun Shade................................................................ 116-0513 Trash Container, 2.5-gallon capacity............................TC26 Turf Striping Kit........................................ See Page 106-107 UltraVac ® Collection Systems...................See Page 114-121 Operator Comfort................................ Also Refer To 98-99 Standard Seat.......................................................... 116-4474 Custom Ride Seat Suspension................................116-0062 Full-Suspension Seat............................................... 116-7234 Tilt Frame & 3D Isolation System Kit..................... 116-0941 For more information on Accessories see page 94-125

32

33

Blade Length

Notched Air Foil

Solid Air Foil

Low Lift

3 3 3

16.25" 18.00" 20.50" 24.50"

103-6401 103-6402 103-6403 103-6404

103-6381 103-6382 103-6383 103-6384

103-6386 103-6387 103-6388 103-6389

®

3

Belts eXtreme 2 Mulching* Mulching

Hydraulic Drive

Blade Drive

103-6391 103-6392 103-6393 103-6394

109-3388 109-3388 109-3388 109-3388

109-8070 109-4994 109-8073 109-9023

116-5177 116-5175 116-5174 116-5171

*Requires installation of Micro-Mulch accessory for proper mulching

Drive Wheels Pneumatic Tire Rim Only Tire Only Complete Rim Only Tire Only 48" 52" 60" 72"

109-3645 109-2875 109-2871 109-3156

1-653160 115-3590 1-653160 115-3589 1-633993 115-3588 1-633993 109-8972

n/a n/a n/a n/a

1-633002 1-633002 1-633002 1-523009

Assembly2 Complete 103-5189 103-5189 103-5189 103-5188

Semi-Pneumatic Tire Assembly1 Rim Only Tire Only Complete n/a n/a n/a n/a

n/a n/a n/a n/a

109-9126 109-9126 109-91263 109-9127

®

48" 52" 60" 72"

# of Blades

LAZER Z S-SERIES

LAZER Z S-SERIES

Blades material is 0.20" thick alloy steel Deck Size

Decks

Cup Holder – Standard.

34

Style – Full-floating UltraCut ™ Series 4. Side-discharge standard with the option to bag or mulch.

Widths Available – 48," 52," 60" and 72."

Deck Construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. 4-point suspension, full-floating deck with 3 adjustable anti-scalp rollers on 48" & 52". 4 adjustable antiscalp rollers on 60"; 6 adjustable anti-scalp rollers on 72".

Cutting Height – 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.

Blade Spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver.

Blade-Tip Speed – Approximately 18,500 fpm.

Equipment

Power Components

1 standard 2 optional 3 LZS740KC604 uses 109-9127

Engines – FX651V, FX691V, FX801V Kawasaki®; FX801V Kawasaki with propane conversion; CV680 & CV740 Kohler ® Command,™ ECV730 &ECV749 Kohler Command EFI engines. All engines are governed to 3,750 rpm.

Air Filter – Heavy-duty canister air filtration system.

Drive System – Two Exmark® exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavyduty components.

12 cc pumps and 14. 5 cubic inch motors (48" & 52").

12 cc pumps and 14. 5 cubic inch motors with integrated shock valve (60" & 72").

Hydro Fluid – Exmark Premium Hydro oil.

Speed – Infinitely variable speed selection from 0–10.0 mph (16.0 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.

PTO Engagement – MagStop electromagnetic 200-ft-lbs clutch with spot brake.

Fuel Capacity – High-capacity, 12-gallon (45.4-L), single fuel tank with single fill location (except LZS730EKC604 has an 8-gallon (30.3-L)). Propane model has 43.5 lb (10.3 gallon) propane tank.

Drive-Wheel Release – Allows unit movement without engine running.

Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.

Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.

Quick Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

Casters – .50" thick caster yoke arm.

Tractor Frame – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.

Steering and Motion Control – Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions.

Front Caster Tires – 13 x 5.0-6; smooth-tread, semi-pneumatic on 48," 52" & 60" units, 13 x 6.5-6; smooth-tread, semipneumatic on 72" and LZS740KC604.

Drive Tires – 23 x 9.5-12, Turf Master® (48" & 52").

24 x 12.0-12, Turf Master (60" & 72").

Turning Radius – True zero-turn.

Parking Brake – Lever-actuated disc brake.

Seat – Deluxe, two-tone, bolstered seat with Elastomeric Vibration Control material.

Diagnostics – Operational diagnostics with integral fuel gauge.

EFI unit has malfunction indication light (MIL).

Electrical – 12-volt battery with 15-amp alternator. (EFI has 20) Engine Hourmeter – Standard.

35

Size

LZE600KA484 FX600V Kawasaki® V-Twin LZE691KA524 FX691V Kawasaki V-Twin LZE740KC604 CV740 Kohler Command

™

Weight

Length Height

Defl. Down

Defl. Up

Price

48" UltraCut™ Series 4

1035 lbs

79.2"

69.5"

59.6"

51.8"

$

52" UltraCut Series 4

1070 lbs

79.2"

69.5"

64.8"

56.3"

$

60" UltraCut Series 4

1105 lbs

83.1"

69.5"

72.8"

62.5"

$

Available with 48," 52" & 60" full-floating UltraCut Series 4 cutting decks.

Additional features include:

• Compact, heavy-duty unibody frame with standard rear-sloping, easily foldable ROPS • Seat position optimized for comfort and improved

center of gravity.

• Exmark® exclusive Parker unitized 12 cc pump and wheel motor system with no hoses.

• 12 x 5.0-6 smooth tread, pneumatic, front caster tires for increased reliability. 60" unit has 13 x 5.0-6, smooth tread, pneumatic.

Key Features

Powered by Kawasaki V-Twin, or Kohler Command engines.

• Welded, heavy-duty 1.5" x 3" tubular steel unibody for increased durability.

• Heavy-duty canister air filtration system improves engine life, simplifies maintenance and boosts overall productivity.

• High-capacity, 8-gallon, single fuel tank with single fill location to reduce your time at the gas pump.

• No routine grease points. Only 4 annual grease points.

See page 132 for Exmark® warranty details

Accessories & Attachments

Key Features

®

®

Deck

®

LAZER Z E-SERIES

Width Engine

LAZER Z E-SERIES

Model Number

3-Bushel Bagger....................................................... GC3602 12 Volt Adapter.......................................................109-9694 Rear Anti-Scalp Kit - Fits 60"..................................116-4614 Equipment Cover - Large........................................ 116-1379 Extended Drive Lever.............................................116-1065 Hitch Kit.................................................................. 109-9487 Hydro Maintenance Kit...........................................116-3282 Jack.......................................................................... 116-1351 Jack Receiver...........................................................116-5701 Light Kit.................................................................... 116-1154 Mulching Kits............................................ See Page 124-125 Operator Controlled Discharge................................ OCD02 Power Deck Lift....................................................... 116-2517 Sun Shade................................................................116-0513 Trash Container, 2.5-gallon capacity............................ TC26 Turf Striping Kit........................................See Page 106-107 UltraVac ® Collection Systems.................. See Page 114-121 Standard Seat..........................................................116-4474 Full-Suspension Seat...............................................116-7234 Tilt Frame & 3D Isolation System Kit......................116-0941 For more information on Accessories see page 94-125

36

37

Power Components Blade Length

Notched Air Foil

Solid Air Foil

48"

3

16.25"

103-6401 103-6381 103-6386

103-6391

116-5177

116-1953

116-1965

52"

3

18.00"

103-6402 103-6382 103-6387

103-6392

116-5175

116-1953

116-1966

60"

3

20.50"

103-6403 103-6383 103-6388

103-6393

116-5174

116-1953 109-8073

Low Lift

Pump Drive

Blade Drive

®

Drive Wheels Rim Only Tire Only Complete

Pneumatic Tire Assembly Rim Only Tire Only Complete

109-3645 116-1948

116-1940

n/a

116-1952

52"

109-2875

116-1948

116-1941

n/a

116-1952

116-1949

60"

109-2871

116-3139

116-3138

n/a

1-633002

103-5189

Engines – FX600V & FX691V Kawasaki® V-Twin and CV740 Kohler® Command™ engines. All engines are governed to 3,750 rpm.

Air Filter – Heavy-duty canister air cleaner.

Drive System – Two Exmark® exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components.

Hydro Fluid – Exmark Premium Hydro oil.

12cc pumps and 14.5 cubic inch motors.

Speed – Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.

Decks

48"

PTO Engagement – MagStop Electromagnetic 175 ft-lbs clutch with spot brake on 48" and 52" models. MagStop electromagnetic 200-ft-lbs clutch with spot brake on 60" models.

Fuel Capacity – 8-gallon (30.3-L), single fuel tank with single fill location.

Drive-Wheel Release – Allows unit movement without engine running.

Equipment

Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.

Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.

116-1949

®

Power Components

eXtreme 2 Mulching* Mulching

*Requires installation of Micro-Mulch accessory for proper mulching

Quick Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

Casters – .50" thick caster yoke arm.

Cup Holder – Standard.

38

Belts

# of Blades

LAZER Z E-SERIES

LAZER Z E-SERIES

Blades material is 0.20" thick alloy steel Deck Size

Style – Full-floating UltraCut™ Series 4. Side-discharge standard with the option to bag or mulch.

Widths Available – 48," 52" and 60."

Deck Construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. 4-point suspension, full-floating deck with 3 adjustable, anti-scalp rollers on 48" & 52" models. 4 adjustable, anti-scalp rollers on 60" model.

Cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.

Blade Spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm (.98") -diameter spindle shaft and splined blade driver.

Blade-Tip Speed – Approximately 18,500 fpm.

Tractor Frame – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.

Steering and Motion Control – Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions.

Front Caster Tires – 12 x 5.0-6, smooth-tread, pneumatic on 48" & 52" unit. 13 x 5.0-6 on 60" unit.

Drive Tires – 22 x 9.5-12 Turf Master® drive tires on 48" and 52" models. 23 x 10-5-12 Turf Master drive tires on 60" model.

Turning Radius – True zero-turn.

Parking Brake – Lever-actuated disc brake.

Seat – Commercial-grade high-back contoured foam padded with armrests. Adjusts fore and aft from operator's position.

Diagnostics – Operational diagnostics with integral fuel gauge.

Electrical – 12-volt battery with 15-amp alternator.

Engine Hourmeter – Standard.

39

Weight

Length

Height

Width

CV640 Kohler® Command™

845 lbs

67.3"

51.2"

42.6"

$

NV730EKC1

ECV730 Kohler Command EFI

850 lbs

67.3"

51.2"

42.6"

$

NV740KC1

CV740 Kohler Command

850 lbs

67.3"

51.2"

42.6"

$

Length

Height

Width

Decks

Deck

CD42CD

42" Center Discharge

295lbs

37.2"

13.1"

43.2"

$

48" Center Discharge

325 lbs

39.9"

13.1"

49.2"

$

®

are carb-compliant.

Powered by Kohler Command, or Kohler Command Electronic Fuel Injection engines.

Available with 42" and 48" cutting decks.

Full-floating, 4 5/8"-deep deck that traces the precise contours of the turf for a flawless cut.

Rear-discharge deck design with two-sided trimming enables the operator to effectively control discharge around landscape areas that include flowers, mulch beds and walkways.

Integrated collection system combines precision cutting performance with advanced dedicated bagger technology.

Accessories & Attachments

• Large-capacity, 9.5-bushel (76 gallons) hopper is standard.

• Larger-diameter (5" x 11") blower generates enhanced airflow for optimum vacuuming performance and debris collection.

• Fill Reduction provides the versatility to: ­– 100% bag – Closed 50% mulch / 50% bag –­ 100% mulch (requires optional mulch kit) • The exclusive "FeatherTouch" Control System provides effortless handling.

• Comfortable, ergonomic positioning of the controls minimizes fatigue.

• Seat with Elastomeric Vibration Control material for improved operator comfort.

See page 132 for Exmark® warranty details

Additional features include:

Price

CD48CD

1Units

Key Features

Size

Key Features

®

Engine

NV640KC1

NAVIGATOR

NAVIGATOR

Model Number

Dual Semi-Pneumatic Rear Casters................................ 103-9005 Narrow Drive Tire Kit (pair) 18 x 8.5-10.......................... 103-9007 Mulching Kit.................................................. Also refer to 124-125 42" deck.....................................................................MKNAV42 48" deck.....................................................................MKNAV48 Light Kit............................................................................. NAVLKIT Fill Reduction Kit for models below S/N 670,000............ 109-5458 Automatic Door Kit.......................................................... 109-5459 Removable Dump Tub Kit................................................ 116-1429

Front-Mount Attachments

Quick Hitch Attachment System...........................NAVSUBFRM01 44" Snow Blower (requires NAVSUBFRM01)............... NAVSBLWR44 48" Snow Blade (requires NAVSUBFRM01).................... NAVSBLD48 For more information on Accessories see page 94-125

40

41

Blades - material is 0.164" thick

Belts

42" 48"

# of Blades

Blade Length

Standard Standard Mulching LH RH LH*

Mulching RH*

2 2

22.00"

103-4209

103-9527

25.00"

103-4207 103-4208 103-9524

103-4210 103-9526

42" has 3.5" air foil. 48" has 5.5" air foil.

Rim Only 18 x 8.5-10 18 x 10.5-10

Drive Wheels Tire Only Optional 18 x 8.5-10

Standard 18 x 10.5-10

103-9525

103-6767 103-4244 103-6767 103-4244 1matched

set

Rear Caster Wheels

Complete

13 x 8.0-62

13 x5.0-63

42"

103-4318 103-4320 105-1945

103-4321 103-4319

103-9495

103-9494

103-3785

48"

103-4318 103-4320 105-1945

103-4321 103-4319

103-9495

103-9494

103-3785

Engine – CV640 & CV740 Kohler® Command™; ECV730 Kohler Command EFI engines. All engines are governed to 3,600 rpm.

Air Cleaner – Heavy-duty canister air filtration.

Drive System – Dual Hydro-Gear® 12 cc variable displacement pumps power Hydro-Gear Planetary Reduction motors.

Hydro Fluid – Exmark Premium Hydro oil.

Speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–5.5 mph (8.9 kmph) reverse.

Style – Full-floating, center-discharge cutting deck with heavyduty gear-driven spindle assembly. Patented Fill Reduction baffles standard.

Widths Available – 42" and 48."

Deck Construction – 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports.

Cutting Height – 1.0" (2.5 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments.

Blade Drive – 1" Austempered spindle shaft with shear-pin protection at the blades.

Blade-Tip Speed – Approximately 18,500 fpm.

3semi-pneumatic

tire assembly dual tires

Steering and Motion Control – "FeatherTouch" hand-control drive levers, low-force constant speed lever.

Front Caster Tires – 8 x 3.0-4 semi-pneumatic.

Rear Caster Tire – 13 x 8.0-6 semi-pneumatic.

Drive Tires – 18 x 10.5-10 Multi-Trac® C/S. Turning Radius – Zero-turn.

Electrical – 12-volt battery with 15-amp alternator. EFI unit has 20-amp alternator.

Fuel Capacity – 7.5-gallon (28.4-L), pivoting tank for easier engine service.

Drive-Wheel Release – Allows movement without engine running.

Safety Package – Operator Presence Controls (OPC) and drive system interlock.

tire assembly w/axle

Tractor Frame – Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0," strategically located, continuous force counterweight springs.

Equipment

Power Components

Shear Pin

Hydro Pump Drive

103-7705 92-5816 99-0283

Front Caster Wheels

Standard 18 x 10.5-10

PTO/ Blower Drive1

103-7705 92-5816 99-0283

2semi-pneumatic

Decks

Blade Bolt

*Requires installation of Micro-Mulch accessory for proper mulching3

Complete Optional 18 x 8.5-10

Blade Driver

®

NAVIGATOR

Deck Size

NAVIGATOR

®

Power Components

PTO Engagement – Clutching belt with 6" brake band.

Gearbox Design – Heavy-duty cast iron. Three independently sealed high-capacity gearboxes with spiral bevel-cut gears for quiet operation.

Blower – 5.0" x 11" x 1/4" housing with reinforced high-wear areas and a three-blade abrasion-resistant impeller.

Grass Catcher Capacity – Rear tapered 9.5-bushel (76-gallon) capacity.

Diffuser – Fixed mechanical with Exmark® exclusive debris manager.

Fill Indicator – Audible alarm.

Ground Clearance – 4" from base of tractor frame.

Parking Brake – Wet disc, internal in wheel motor.

Seat – High-back, "EVC" (Elastomeric Vibration Control) seat, which has no springs to break.

Hour Meter – Standard.

42

43

Deck

Weight

Width Length Height Defl. Down Defl. Up

Price

44" UltraCut™ Series 3

822 lbs

78.8"

71.3"

56.4"

48.2"

$

PNS651KA483

FX651V Kawasaki V-Twin

48" UltraCut Series 3

862 lbs

77.8"

71.3"

59.5"

50.7"

$

PNS680KC523

CV680 Kohler® Command™

52" UltraCut Series 3

873 lbs

77.8"

71.3"

64.3"

54.2"

$

PNS740KC604

CV740 Kohler Command

60" UltraCut Series 4

948 lbs

78.8"

71.3"

72.8"

61.4"

$

Powered by Kawasaki V-Twin, or Kohler Command engines.

Available with 44," 48," & 52" UltraCut Series 3 and 60" UltraCut Series 4 cutting decks.

Additional features include:

• Patented cutting-deck design yields professional

results and the 5.0"-deep deck on 44," 48" & 52", and a 5.5"-deep deck on the 60" unit improves cutting efficiency.

• Ground speed of 0 – 8.0 mph forward; 0 – 5.0 mph reverse, increases productivity. 60" unit has speed of 0 – 9.0 mph forward; 0 – 6.0 mph reverse.

• 22 x 9.5-12 Kenda drive tires maximizes traction. 60" unit has 23 x 10.5-12 Kenda drive tires.

• Seat position optimized for comfort and improved

center of gravity.

Key Features

®

PIONEER S-SERIES

FX600V Kawasaki® PNS600KA443 V-Twin

Size

®

Key Features

Engine

PIONEER S-SERIES

Model Number

• HydroGear ZT3100 hydrostatic drive system on 44," 48" & 52" units and HydroGear ZT3400 hydrostatic drive system on 60" unit, with charge pumps, steel cut gears and shock valves that delivers a smooth drive experience and years of reliable service.

• Foot-operated Quick Height Adjust System allows fast and easy height adjustments.

• Anti-scalp rollers allow the deck to trace the contour of the terrain, which helps prevent turf scalping.

• Rear-sloping foldable ROPS standard.

• Heavy-duty canister air filtration system that improves engine life, simplifies maintenance and boosts overall productivity.

• 4-ply 13 x 5 front caster wheels for increased durability with heavy-duty axles and bearings • Large 7-gallon, single fuel tank with single fill location to reduce your time at the gas pump.

• Spring-supported seat for operator comfort.

Accessories & Attachments

See page 132 for Exmark® warranty details

UltraVac E-Series (2-Bag Powered Collection System)....116-3001 3-Bushel Bagger.............................................................. GC3602 Anti-Scalp Roller Kit - Fits 60"....................................... 116-4614 Equipment Cover - Large.............................................. 116-1379 Full Suspension Seat......................................................116-4678 Hitch Kit......................................................................... 109-6245 Jack.................................................................................. 116-1351 Jack Receiver.................................................................. 116-1571 Light Kit........................................................................... 116-1154 Mulching Kits................................................... See Page 124-125 Turf Striping Kit..............................................................116-5297 Sun Shade....................................................................... 116-0513 Trash Container, 2.5-gallon capacity.................................. TC26 For more information on Accessories see page 94-125

44

45

Length

Air Foil

Foil

Low Lift

n/a

n/a

eXtreme 2 Mulching* Mulching

Blade Drive

22.25"

116-1037

116-1047

116-5606

115-9613

1-413093

16.25"

103-6401 103-6381 103-6386

103-6391

116-5177

115-9613

116-3455

52"

2 3 3

18.00"

103-6402 103-6382 103-6387

103-6390

116-5175

115-9613

103-9273

60"

3

20.50"

103-6403 103-6383 103-6388

103-6393

116-5174

115-9613

114-8154

44" 48"

Drive Wheels Rim Only Tire Only Complete

Pneumatic Tire Assembly Rim Only Tire Only

Complete

44"

116-6320 120-3271

116-6318

n/a

1-633002

103-5189

48"

116-6320 120-3271

116-6318

n/a

1-633002

103-5189

52"

116-6320 120-3271

116-6318

n/a

1-633002

103-5189

60"

120-3272

119-2685

n/a

1-633002

103-5189

120-3269

Engines – FX600V & FX651V Kawasaki ®; CV680 & CV740 Kohler ® Command™ engines. All engines are governed to 3,750 rpm.

Power Components

Pump Drive

Style – Full-floating 5.0"-deep UltraCut Series 3 on 44," 48" & 52" models. Full-floating 5.5"-deep UltraCut Series 4 on 60" model. All models have side discharge standard with option to bag or mulch.

Decks

Air Filter – Heavy-duty canister air filtration system.

Drive System – Dual Hydro-Gear® ZT3100, hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spind-on filter and heavy-duty components. 60" model uses Hydro-Gear ZT3400.

Hydro Fluid – Exmark Premium Hydro oil.

Speed – Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse on 44," 48" & 52" models. Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–6.0 mph (9.7 kmph) reverse on 60" model.

Blade Spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm-diameter spindle shaft and splined blade driver.

Blade-Tip Speed – Approximately 18,500 fpm.

Fuel Capacity – 7-gallon (26.5-L) single fuel tank.

Drive-Wheel Release – Standard - allows unit movement without engine running.

Tractor Frame – Unibody, welded, heavy-duty 2" square tublar steel.

Steering and Motion Control – Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 3 height positions.

Equipment

Safety Package – Operator Presence Controls (OPC) and drive system interlock.

Casters – 0.38"-thick caster yoke arms.

Cup Holder – Standard.

Widths Available – 44," 48," 52" and 60."

Deck Construction – 10-gauge top that is formed and continuously seam welded and 7-gauge side skirt. 7-gauge spindle mounting on 60" model. 4-point suspension, full-floating deck with 3 adjustable, anti-scalp rollers on 44," 48" & 52" models. 4 adjustable, anti-scalp rollers on 60" model.

Cutting Height – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position.

PTO Engagement – MagStop electromagnetic 175-ft-lb clutch on 44," 48" & 52" models. MagStop electromagnetic 200-ft-lb clutch on 60" unit.

Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.

Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

*Requires installation of Micro-Mulch accessory for proper mulching

®

®

Belts

Power Components Blade Notched Solid Air

# of Blades

PIONEER S-SERIES

PIONEER S-SERIES

Blades material is 0.20" thick alloy steel Deck Size

Front Caster Tires – 13 x 5.0-6, smooth tread, pneumatic.

Drive Tires – 22 x 9.5-12 Kenda tires on 44," 48" & 52" models.

23 x 10.5-12 Kenda tires on 60" model.

Turning Radius – True zero-turn.

Parking Brake – Lever-actuated pawl break.

Seat – Commercial-grade high-back contoured foam padded with armrests. Hinged mounting with spring suspension.

Adjustment is fore and aft from operator's position.

Electrical – 12-volt battery with 15-amp alternator.

Engine Hourmeter – Standard.

46

47

Size

Weight

Length Height

PNE651KA482

FR651V Kawasaki® V-Twin

48" UltraCut™ Series 2

799 lbs

77.8"

70.0"

59.2"

48.0"

$

PNE691KA522

FR691V Kawasaki V-Twin

52" UltraCut Series 2

805 lbs

77.8"

70.0"

64.0""

52.8

$

Defl. Down Defl. Up

Price

Available with 48" and 52" UltraCut Series 2 cutting decks.

Additional features include:

• Patented cutting-deck design yields professional results.

• Pneumatic, 13 x 5 front caster wheels provide a smoother ride.

• HydroGear ZT2800 hydrostatic drive system delivers a smooth drive experience and years of reliable service.

• Foot-operated Quick Height Adjust System allows fast and easy height adjustments.

Key Features

Powered by FR651V and FR691V Kawasaki V-Twin engines for superior performance and long life.

• Seat position optimized for comfort and improved center of gravity.

• Anti-scalp rollers allow the deck to contour the ground to prevent scalping.

• 20 x 8.0-10 Turf Master® drive tires maximize traction.

• Rear-sloping foldable ROPS standard.

• Ground speeds of 0-7.0 mph forward, 0-4.0 mph reverse, increase productivity.

• Large 7-gallon, single fuel tank with single fill location to reduce your time at the gas pump.

• Spring-supported seat for operator comfort.

Accessories & Attachments

Key Features

®

Deck

®

PIONEER E-SERIES

Width Engine

PIONEER E-SERIES

Model Number

See page 132 for Exmark® warranty details

2-Bag Collection System.............................................. 116-5000 Equipment Cover - Large.............................................. 116-1379 Full-Suspension Seat......................................................116-4678 Hitch Kit......................................................................... 109-6245 Jack................................................................................. 116-1351 Jack Receiver.................................................................. 116-1571 Light Kit........................................................................... 116-1154 Mulching Kits.............................................. Also refer to 124-125 48" High Lift Bagger Blade.......................................... 109-6391 52" High Lift Bagger Blade.......................................... 109-6392 Sun Shade....................................................................... 116-0513 Trash Container.................................................................... TC26 For more information on Accessories see page 94-125

48

49

48" 52"

Belts

# of Blades

Blade Length

Notched Air Foil

Solid Air Foil

3 3

16.25"

103-6401

103-6381 103-6386

109-6389

116-5177

115-9613 109-5364

18.00"

103-6402

103-6382 103-6387

109-6390

116-5175

115-9613

Low Lift

eXtreme 2 Mulching* Mulching

Pump Drive

Blade Drive 109-3661

*Requires installation of Micro-Mulch accessory for proper mulching

Decks

Drive Wheels Rim Only Tire Only Complete

Pneumatic Tire Assembly Rim Only Tire Only Complete

116-2299 116-3165

116-3163

119-3472

120-2252

120-2251

116-2299 116-3165

116-3163

119-3472

120-2252

120-2251

Engines – FR651V and FR691V Kawasaki V-Twin,® governed to 3,600 rpm.

Air Filter – Standard engine manufacturer's air filter.

Drive System – Dual Hydro-Gear® ZT2800 hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components.

Hydro Fluid – Exmark Premium Hydro oil.

Speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.0 mph (6.4 kmph) reverse.

PTO Engagement – MagStop electromagnetic 125-ft-lb.

Fuel Capacity – 7-gallon (26.5-L) single fuel tank with single fill location.

Drive-Wheel Release – Allows unit movement without engine running.

Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.

Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.

Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

Casters – 0.38"-thick caster yoke arms.

Cup holder – Standard.

Decks

48" 52"

Cutting Height – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator seat.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 7.50"-diameter cutter housing contains 17mm-(.67") diameter spindle shaft and hex blade drive.

Blade-Tip Speed – Approximately 18,500 fpm.

Tractor Frame – Unibody, welded, heavy-duty 2" square tublar steel.

Steering and Motion Control – Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment.

Equipment

Power Components

®

®

50

PIONEER E-SERIES

PIONEER E-SERIES

Blades material is 0.20" thick alloy steel Deck Size

Front Caster Tires – 13 x 5.0-6, smooth tread, pneumatic.

Drive Tires – 20 x 8.0-10 Turf Master® drive tires.

Turning Radius – True zero-turn.

Parking Brake – Lever-actuated pawl brake.

Seat – Commercial-grade, high-back contoured foam padded with armrests. Hinged mounting with spring suspension.

Adjustment is fore and aft from operator's position.

Electrical – 12-volt battery with 15-amp alternator.

Engine Hourmeter – Standard.

Style – Full-floating, UltraCut Series 2. Side-discharge standard with the option to bag or mulch.

Widths Available – 48" and 52."

Deck Construction – 10-gauge top that is formed and continuously seam welded and 10-gauge side skirt. 4-point suspension, full-floating deck with 3 adjustable, anti-scalp rollers.

51

FR691V Kawasaki® V-Twin

Size

Deck

50"

Series 1 fabricated

Weight 681 lbs.

Length Height 71.8"

42.9"

Defl. Down Defl. Up 62.8"

54.6"

Price $

Powered by a FR691V Kawasaki V-Twin engine.

Available with 50" Series 2 fabricated cutting deck.

Additional features include:

• Deck is easily removed for servicing.

• Features Hydro-Gear ® ZT2800.

• Automatic park brake system.

• Standard engine guard for extra protection.

• Spring-supported seat for operator comfort.

• 3-gallon fuel tank with single fill location.

• Ground speeds up to 7 mph.

• Rubber floor mat is standard.

52

Accessories & Attachments

Key Features

®

®

QUEST S-SERIES

QTS691KA502

Width Engine

QUEST S-SERIES

Model Number

2-Bag Collection System................................................. 116-6512 Equipment Cover - Small................................................. 116-1378 Hitch Kit................................................................................. 79014 Hour Meter.......................................................................116-5461 Rubber Floor Mat.............................................................116-5457 Mulching Kit...................................................................... 116-6514 Sun Shade.............................................................................. 79011 For more information on Accessories see page 94-125

See page 132 for Exmark® warranty details

53

Blades material is 0.20" thick alloy steel

17.50"

115-5059

Blade Drive

115-5062

119-3321

119-8820

*Requires installation of Micro-Mulch accessory for proper mulching

50"

Caster Wheels

Drive Wheels Rim Only Tire Only Complete

Rim Only Tire Only

116-2299 116-3165

119-3472

116-3163

Engines – FR691V Kawasaki® governed to 3,300 rpm.

Drive System – Two Hydro-Gear® ZT2800 hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components.

Hydro Fluid – Exmark Premium Hydro oil.

Speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward. 0–3.4 mph (5.5 kmph) reverse.

PTO Engagement – MagStop electromagnetic 125-ft-lbs clutch.

Fuel Capacity – 3-gallon (11.4-L) single fuel tank.

Drive-Wheel Release – Standard - allows unit movement without engine running.

Safety Package – Operator Presence Controls (OPC) and drive system interlock.

Deck Lift – Standard. Lever lift. Foot-assist lifts the deck to maneuver around obstacles.

Cup Holder – Standard.

119-3471

Complete 119-3473

Tractor Frame – Unibody, riveted 10-gauge steel.

Steering and Motion Control – Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 2-height positions.

Equipment

®

Power Components

3

Pump Drive

®

QUEST S-SERIES

50"

Belts

Low Lift / Mulching*

QUEST S-SERIES

Deck # of Blade SPECIFICATIONS (continued) Size Blades Length Standard

Front Caster Tires – 13 x 5 ribbed tread, pneumatic.

Drive Tires – 20 x 8.0-10, 4-ply Turf Master.® Turning Radius – True zero-turn.

Parking Brake – Automatic-actuated pawl brake.

Seat – Commercial grade, high-back contoured foam padded with armrests. Hinged mounting and spring suspension.

Adjustment is fore and from operator position.

Electrical – 12-volt battery with 15-amp alternator.

Engine Hourmeter – Optional.

Decks

Style – Exmark Series 2 fabricated and welded steel deck. Sidedischarge standard with the option to bag or mulch.

Widths Available – 50."

Deck Construction – 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension.

Cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard footoperated assist.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17mm- (.67") diameter spindle shaft.

Blade-Tip Speed – Approximately 18,500 fpm.

54

55

Size

Deck

Weight

Length Height

QTE651KA421

FR651V Kawasaki® V-Twin

42"

Series 1 stamped

551 lbs

71.8"

40.7"

53.8"

45.3"

$

QTE691KA501

FR691V Kawasaki V-Twin

50" Series 1 stamped

623 lbs

72.9"

42.9"

63.0"

54.6"

$

Defl. Down Defl. Up

Price

Powered by a FR651V and FR691V Kawasaki V-Twin engines.

Available with 42" and 50" Series 1 stamped cutting decks.

Additional features include:

• Deck is easily removed for servicing.

• Hydrostatic control: Hydro-gear ® ZT2100 (42") and ZT2200 (50").

• Automatic park braking system.

• Standard engine guard for extra protection.

• Spring-supported seat for operator comfort.

• 3-gallon fuel tank with single fill location.

• Ground speeds up to 7 mph.

• Rubber floor mat is standard.

56

See page 132 for Exmark® warranty details

Accessories & Attachments

Key Features

®

®

QUEST E-SERIES

Width Engine

QUEST E-SERIES

Model Number

2-Bag Collection System (42" unit).................................116-4764 2-Bag Collection System (50" unit).................................116-4765 Blowout Ring Kit (42" unit).............................................. 114-1620 Blowout Ring Kit (50" unit).............................................. 114-1608 Equipment Cover - Small................................................. 116-1378 Hitch Kit................................................................................. 79014 Hour Meter.......................................................................116-5461 Mulching Kits................................................ Also refer to 124-125 42" unit........................................................................116-4766 50" unit........................................................................ 116-4767 Rubber Floor Mat (42" unit)............................................ 120-5456 Rubber Floor Mat (50" unit)........................................... 120-5457 Sun Shade.............................................................................. 79011 Turf Striping Kit................................................................120-7905 For more information on Accessories see page 94-125

57

Blades material is 0.20" thick alloy steel

Pump Drive

Blade Drive

42"

2

21.60"

110-6568

106-2247

119-3309

119-8819

50"

3

17.50"

115-5059

115-5062

119-3321

119-8820

*Requires installation of Micro-Mulch accessory for proper mulching

®

®

QUEST E-SERIES

Belts

Low Lift / Mulching*

Caster Wheels

Drive Wheels 42" 50"

Complete

107-2475 110-6885

119-3465

114-1641

110-6791

110-6785

119-8908

119-3472

119-3471

119-3473

119-8909

Rim Only Tire Only

Decks

Decks

Drive System – Dual Hydro-Gear® ZT2100 hydro static transmission with no hoses and integrated cooling fans on 42" unit. Dual Hydro-Gear ZT2200 with no hoses and integrated cooling fans on 50" unit.

Speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward. 0–3.4 mph (5.5 kmph) reverse.

Fuel Capacity – 3-gallon (11.4-L) single fuel tank.

Drive-Wheel Release – Standard - allows unit movement without engine running.

Safety Package – Operator Presence Controls (OPC) and drive system interlock.

Deck Lift – Standard: lever lift. Foot-assist lifts the deck to maneuver around obstacles.

Cup Holder – Standard.

Style – Exmark Series 1 stamped steel deck. Side-discharge standard with option to bag or mulch.

Widths Available – 42" and 50."

Deck Construction – 13-gauge stamped steel deck shell.

Formed spindle mounting locations for improved strength and reduced weight. 3 point suspension.

Cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard footoperated assist.

Blade Spindles – No maintenance, sealed and non-greasable spindles. 5.50"-diameter cutter housing with 17mm- (.67") diameter spindle shaft.

Blade-Tip Speed – Approximately 18,500 fpm.

Tractor Frame – Unibody, riveted 10-gauge steel.

Steering and Motion Control – Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 2-height positons.

PTO Engagement – MagStop electromagnetic 80-ft-lbs clutch on 42". MagStop electromagnetic 125-ft-lbs clutch on 50".

Front Caster Tires – 350/410 x 4 smooth tread, pneumatic on 42" unit. 13 x 5 ribbed tread, pneumatic on 52" unit.

Equipment

Power Components

Engines – FR651V and FR691V Kawasaki® V-Twin, governed to 3,300 rpm.

58

Complete

Rim Only Tire Only 217-60

QUEST E-SERIES

Deck # of Blade SPECIFICATIONS (continued) Size Blades Length Standard

Drive Tires – 18 x 7.50-8, 4-ply Turf Tech TL on 42" unit.

18 x 9.50-8, 4-ply Turf Tech TL on 52" unit.

Turning Radius – True zero-turn.

Parking Brake – Automatic-actuated pawl brake.

Seat – 42" unit has high-back foam padded with armrests.

Hinged mounting with spring suspension. 50" unit has commercial-grade, high-back contoured foam padded with armrests. Hinged mounting and spring suspension. Adjustment is fore and from operator position.

Electrical – 12-volt battery with 15-amp alternator.

Engine Hourmeter – Optional.

59

Length

FS541V Kawasaki® V-Twin

36" UltraCut™ Series 3

1

Deck

Weight 790 lbs

60.5"

74.0"

50.0"

Defl.

Up Price

39.1"

48.0" $

36" UltraCut Series 3

790 lbs

60.5"

74.0"

50.0"

39.1"

48.0" $

VT651KA484

FS651V Kawasaki V-Twin

48" UltraCut Series 4

838 lbs

60.5"

74.0"

50.0"

59.6"

51.8" $

VT691KA484CA FS691V Kawasaki V-Twin

48" UltraCut Series 4

855 lbs

60.5"

74.0"

50.0"

59.6"

51.8" $

VT691KA524

FS691V Kawasaki V-Twin

52" UltraCut Series 4

866 lbs

60.5"

74.0"

50.0"

64.8"

56.3" $

VT691KA524CA1 FS691V Kawasaki V-Twin

1

52" UltraCut Series 4

866 lbs

60.5"

74.0"

50.0"

64.8"

56.3" $

VT730EKC524

ECV730 Kohler® Command™ EFI 52" UltraCut Series 4

875 lbs

60.5"

74.0"

50.0"

64.8"

56.3" $

VT740EKC604

ECV740 Kohler Command EFI

883 lbs

62.5"

76.0"

50.0"

72.8"

63.9" $

60" UltraCut Series 4

Powered by Kawasaki V-Twin or Kohler Electronic Fuel Injection engines.

Available with 36" UltraCut Series 3 and 48," 52" & 60" UltraCut Series 4 cutting decks.

Additional features include:

• Introducing the addition of a new 60" deck.

• Ergonomically designed steering system includes an Adjustable Front Reference bar that can control the top end speed of the machine.

• Self-compensating suspension makes standing more comfortable.

• Platform folds up, allowing the machine to function like a walk-behind.

• Superior traction and handling allows you to mow changing landscapes effortlessly.

Key Features

are carb-compliant.

• Angled platform sides allow operator to shift his body weight for smoother ride when mowing hillsides.

• Precision-designed, maintenance-free spindles eliminate the need for yearly greasing.

• 11 x 4.0-5, smooth tread, semi-pneumatic front caster tires for increased reliability.

• 20 x 10.5-8 Kenda drive tires on 48," 52" and 60" units and 18 x 8.5-8 Kenda drive tires on 36" units for optimum traction.

• Tough 1.5" x 3.0" steel frame tubes ensure maximum durability.

• Integrated tie-down points for secure trailering.

• Large 8-gallon fuel tank.

• Heavy-duty canister air filtration system on the Kohler EFI powered units that improves engine life, simplifies maintenance and boosts overall productivity.

See page 132 for Exmark® warranty details

Accessories & Attachments 60

Defl.

Platform Platform Down Height Down Up

VT541KA363CA FS541V Kawasaki V-Twin

1Units

Key Features

Size

®

VANTAGE

VT541KA363

Engine

VANTAGE

®

Model Number

Width

3-Bushel Bagger......................................................GC3602 36" requires adapter for bagger and OCD.......... 116-4248 Anti-Scalp Roller Kit (36" unit - right front corner).............116-5305 (48" & 52" units - front of deck).......116-4608 (60" unit - left rear corner)................. 116-4614 Equipment Cover - Large.......................................116-1379 Front Weight Kit..................................................... 116-2935 Jack..........................................................................116-1351 Jack Receiver (36" unit)......................................... 116-4414 Jack Receiver (48," 52" & 60" units).....................116-3300 Light Kit.................................................................. 116-3298 Mulching Kits...........................................See Page 124-125 Operator Controlled Discharge (except 60").... OCDWB01 60" unit..................................................... Coming Soon Turf Striping Kit (36" unit)......................................116-5084 Turf Striping Kit (48," 52" & 60" units)................. 116-5320 Trash Container...................................................... 116-3297 For more information on Accessories see page 94-125

61

Blades material is 0.20" thick alloy steel Low Lift

Pump Drive

Blade Drive 116-3703

36"

2

18.00"

103-6402 103-6382 103-6387

103-6392

116-5175

119-0174

48"

3

16.25"

103-6401 103-6381 103-6386

103-6391

116-5177

114567

99-4627

52"

3

18.00"

103-6402 103-6382 103-6387

103-6392

116-5175

114567

109-5018

60"

3

20.50"

103-6403 103-6383 103-6388

103-6393

116-5174

114567

99-4627

120-6465 116-4605 120-6466

n/a

n/a

112-3810

52"

120-6465 116-4605 120-6466

n/a

n/a

112-3810

60"

120-6465 116-4605 120-6466

n/a

n/a

112-3810

*Requires installation of Micro-Mulch accessory for proper mulching

Decks

Style – Full-floating UltraCut Series 3 on 36" unit and full-floating UltraCut Series 4 on 48," 52" and 60" units.

Side-discharge standard with molded discharge chute and option to bag or mulch.

Widths Available – 36," 48," 52" and 60."

Deck Construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. 4-point suspension.

Front Caster Wheels Rim Tire Only Only Complete n/a n/a 112-3810

Cutting Height – 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.

Blade Spindles – No maintenance, sealed and nongreasable spindles. 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver 25mm (0.98") diameter spindle shaft.

Blade-Tip Speed – Approximately 18,500 fpm.

Equipment

Power Components

48"

Decks

36"

Drive Wheels Wheel & Wheel Tire Tire Only Only 116-4587 116-4605 116-4606

Engines – FS541V, FS651V, FS691V Kawasaki®; ECV730 & ECV740 Kohler ® Command™ EFI engines. All engines governed to 3,600 rpm.

Drive System – Two Hydro-Gear ® 10 cc pumps powering two Parker 12 cubic inch motors.

Hydro Fluid – Exmark Premium Hydro oil.

Speed – Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse.

PTO Engagement – MagStop electromagnetic 175-ft-lb clutch on 36," 48" & 52" models. MagStop electromagnetic 200-ft-lb clutch on 60" unit.

Fuel Capacity – 8-gallon, (30.2-L) single fuel tank with single fill location.

Drive-Wheel Release – Allows unit movement without engine running.

Safety Package – Operator Presence Controls (OPC) with safety interlock system indicators.

Deck Lift – Standard. Mechanical lift-assist springs.

62

Belts eXtreme 2 Mulching* Mulching

®

VANTAGE

Solid Air Foil

VANTAGE

®

Deck # of Blade Notched SPECIFICATIONS (continued) Size Blades Length Air Foil

Tractor Frame – Welded, heavy-duty 1.5" x 3" tubular steel.

Suspension Platform – Self-compensating elastomeric suspension. Stowable operator platform.

Steering and Motion Control – Twin levers with no-tools adjustable front reference bar to modify forward ground speed.

Casters – .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.

Front Caster Tires – 11 x 4.0-5, smooth-tread, semipneumatic tires.

Drive Tires – 18 x 8.5-8 Kenda Tires on 36" unit. 20 x 10.5-8 Kenda drive tires on 48," 52" and 60" units.

Turning Radius – True zero-turn.

Parking Brake – Lever-actuated bar brake.

Electrical System – 12-volt battery with 15-amp alternator on Kawasaki units. 12-volt battery with 20-amp alternator on Kohler EFI unit.

Engine Hourmeter – Standard.

63

ECO-FRIENDLY

Model Number

Engine

Size

Deck

D902 Kubota® Diesel

60"

Series 5

$

LZDS902K725

D902 Kubota Diesel

72"

Series 5

$

Lazer Z X-Series

LZX749EKC606

EVC749 Kohler® Electronic Fuel Injection

50"

™

UltraCut Series 6

$

Lazer Z S-Series

LZS730EKC604

EVC730 Kohler Electronic Fuel Injection

60"

UltraCut Series 4

$

Lazer Z S-Series

LZS749EKC724

EVC749 Kohler Electronic Fuel Injection

72"

UltraCut Series 4

$

Navigator®

NV730EKC

EVC730 Kohler Electronic Fuel Injection

42" or 48"

Center Discharge

$

VT730EKC524

EVC730 Kohler Electronic Fuel Injection

52"

UltraCut Series 4

$

VT740EKC604

EVC740 Kohler Electronic Fuel Injection

60"

UltraCut Series 4

$

Turf Tracer® X-Series TTX650EKCE

EVC650 Kohler Electronic Fuel Injection

52" or 60"

UltraCut Series 4

$

Lazer Z S-Series

LZS801PKA604

FX801V Kawasaki® V-Twin Propane

60"

UltraCut Series 4

$

Lazer Z S-Series

LZS801PKA724

FX801V Kawasaki V-Twin Propane

72"

UltraCut Series 4

$

Lazer® Z DS-Series LZDS902K605 Lazer Z DS-Series

Vantage® Vantage

Turf Tracer X-Series TTX691PKAE

FX691V Kawasaki V-Twin Electric Start Propane

52" or 60"

UltraCut Series 4

$

Turf Tracer S-Series TTS600PKAE483

FS600V Kawasaki V-Twin Electric Start Propane

48"

UltraCut Series 3

$

Propane is a cleaner burning fuel and has fewer combustion by-products as compared to gasoline. Engine oil will contain less contaminates for the equivalent hours of operation.

Cleaner-burning alternative fuel made from renewable resources.

Compared to petroleum-based fuels, biodiesel emits less carbon dioxide, a major contributor to greenhouse gas emissions. Also emits less unburned hydrocarbons and particulate matter which are considered harmful emissions.

Propane

B20 represents a mix of 20 percent biodiesel and 80 percent diesel.

Propane fuel stability - No deterioration or breakdown of fuel over time creating "varnish deposits" as gasoline does. No need for fuel stabilizers during long periods of storage.

Electronic Fuel Injection

Bio-Diesel

Diesel models are biodiesel ready, up to B20, for lower emissions and reduced environment impact.

Reduces fuel consumption, fewer emissions and carbon footprint.

Delivers up to 25% in fuel savings.

Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.

Easy start in any altitude or climate condition (no manual choke).

Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.

Sequential Fuel Injection delivers the precise amount of fuel and spark where needed to maximize efficiency and power.

65

Superior fuel lubricity resulting in less wear and equipment downtime.

Propane

Typically, fuel costs for propane will be less than gasoline, which results in lower operating costs.

Propane is considered a GREEN Alternative Fuel and when burned, it produces less GHG (green house gas) yielding a reduced CARBON FOOTPRINT as compared to gasoline.

PERC (Propane Education & Research Council) reports that GHG reductions typically range in the 20% to 25% range.

No known restrictions regarding hours of operation on "Ozone Action Days."

64

Price

ECO-FRIENDLY

Mower

The propane tanks are of a unique "vapor draw" design that includes a special baffle system to prevent liquid propane ingestion into the supply line, which can cause damage to fuel system components and render the unit inoperative.

CV640 Kohler® Command™ Electric Start ECV650 Kohler Command TTX650EKCE EFI Electric Start FX691V Kawasaki® V-Twin TTX691KAE Electric Start FX691V Kawasaki® V-Twin TTX691KAECA1 Electric Start FX691V FX691V Kawasaki TTX691PKAE1 V-Twin Electric Start Propane

ECS

439 lbs

$

ECS

439 lbs

$

ECS

429 lbs

$

ECS

434 lbs

$

ECS

448 lbs

Deck

Size

Deck

FMD524

52" UltraCut™ Series 4

292 lbs

83.4"

45.0"

64.8"

53.4"

$

FMD604

60" UltraCut Series 4

333 lbs

83.4"

45.0"

73.0"

61.4"

$

TTX640KCE

$

are carb-compliant.

Engines are powered by Kohler Command, Kohler Command Electronic Fuel Injection, Kawasaki V-Twin, or Kawasaki V-Twin with propane conversion.

Available with 52" and 60" UltraCut™ Series 4 cutting decks.

Additional features include:

E N H A N C E D

C O N T R O L

• Large-capacity electromagnetic PTO clutch delivers maximum life and durability.

• Electric-start engines standard.

• Blade-tip speed approximately 18,500 fpm.

• Standard on all models, large (18 x 8.50-8) Turf Master® rear tires for easier mobility on and off curbs.

• Standard with 11 x 4.0-5 smooth tread, semi-pneumatic, front caster tires, which nearly eliminate flat tires.

Key Features

1Units

Price

Overall unit dimensions

Accessories & Attachments

®

TURF TRACER X-SERIES

Weight

• Features E xmark®’s exclusive Enhanced Control System (ECS).

• Standard with heavy-duty canister air filtration systems.

• Ground speeds up to 6.75 mph forward and 2.25 mph in reverse.

66

Width Length Height Defl. Down Defl. Up

Controls

®

Key Features

Engine

TURF TRACER X-SERIES

Model Number

See page 132 for Exmark® warranty details

3-Bushel Bagger................................................................GC3602 Equipment Cover - Large................................................ 116-1379 Mulching Kits................................................Also refer to 124-125 52" unit........................................................................... MK526 60" unit...........................................................................MK606 Operator Controlled Discharge.................................. OCDWB01 StandOn........................................................................ STANDON Turf Striping Kit.................................................See Page 106-107 For more information on Accessories see page 96-125

S Y S T E M

67

Deck Size

eXtreme 2 Mulching* Mulching

Pump Drive A-Section

103-6402 103-6382 103-6387

103-6392

116-5175

109-2584 103-22401 103-2329

103-6403 103-6383 103-6388

103-6393

116-5174

109-2584 1-6033061 1-633173

# of Blades

Blade Length

Notched Air Foil

52"

3

18.00"

60"

3

20.5"

Solid Air Foil

Low Lift

1 Mower

Drive Wheels s/n 320,000 & Above Hub Tire Only Rim Only Complete

Front Casters (11 x 4.0-5) Complete

52"

1-602997 103-2237 103-2238

103-1715

109-3524

60"

1-602997 103-2237 103-2238

103-1715

109-3524

Engines – CV640 Kohler® Command™; ECV Kohler Command EFI; FX691V Kawasaki® V-Twin; FX691V Kawasaki V-Twin with propane conversion. All engines governed to 3,600 rpm.

Air Filter – Heavy-duty canister air filtration system.

PTO Engagement – MagStop Electromagnetic 200 ft-lbs clutch.

Drive System – Twin Hydro-Gear® variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.

Hydro Fluid – Exmark Premium Hydro oil.

Speed – Infinitely variable selection from 0– 6.75 mph (10.9 kmph) forward, 0– 2.25 mph (3.6 kmph) reverse.

Fuel Capacity – 5-gallon (18.9-L) fuel tank. Propane unit has 33.5-lb (8.0 gallon) propane tank.

Style – Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.

Decks

Mower Drive

Blade Drive

*Requires installation of Micro-Mulch accessory for proper mulching

Widths Available – 52" (132 cm) or 60" (152.4 cm).

Deck Construction – 10-gauge top that is formed and continuously seam-welded, with 10-gauge top reinforcement plate, 7-gauge side skirt and 7-gauge reinforcement rings at spindle assembly. 4-point suspension, full-floating deck with 6 adjustable anti-scalp rollers.

Cutting Height – 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.

drive belt is engine-to-deck belt.

Engine Deck – 7-gauge, heavy-duty welded steel.

Steering & Motion Control – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.

Front Caster Tires – Double-yoke, semi-pneumatic, 11 x 4.0-5, smooth tread.

Equipment

Power Components

®

SPECIFICATIONS (continued)

®

TURF TRACER X-SERIES

Belts

TURF TRACER X-SERIES

Blades material is 0.20" thick alloy steel

Drive Tires – 18 x 8.5-8, 4-ply Turf Master.® Tracking Adjustment – Insta-Track.

Drive-Wheel Release – Allows unit movement without engine running.

Turning Radius – True zero-turn.

Safety Package – Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator's position without stopping engine.

Parking Brake – Lever-actuated mechanical compression.

Electrical – 12-volt battery, 15-amp alternator, except for ECV650 has 20-amp alternator.

Engine Hourmeter – Standard.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 5.4"-diameter cutter housing with 1.75"-diameter splined blade drive and 1.0"-diameter spindle shaft.

Blade-Tip Speed – Approximately 18,500 fpm.

68

69

Deck

Weight

Length Height

Defl. Down

Defl. Up

Price

36" UltraCut™ Series 3

569 lbs

77.7"

42.0"

46.7"

36.1"

$

36" UltraCut Series 3

574 lbs

77.7"

42.0"

46.7"

36.1"

$

48" UltraCut Series 3

602 lbs

73.7"

42.0"

57.9"

48.1"

$

48" UltraCut Series 3

626 lbs

73.7"

42.0"

57.9"

48.1"

$

48" UltraCut Series 3

621 lbs

73.7"

42.0"

57.9"

48.1"

$

48" UltraCut Series 3

689 lbs

73.7"

42.0"

57.9"

48.1"

$

52" UltraCut Series 3

636 lbs

75.9"

42.0"

63.5"

53.0"

$

52" UltraCut Series 3

659 lbs

75.9"

42.0"

63.5"

53.0"

$

ngines are powered by Kawasaki V-Twin or Kawasaki V-Twin E with propane conversion.

Available with 36," 48" & 52" UltraCut Series 3 cutting decks.

Additional features include:

• Ground speeds up to 6.2 mph forward and 2.2 mph in reverse.

• Features Exmark®’s exclusive Enhanced Control System (ECS).

• Electric-start standard on FS600V engines.

• Blade-tip speed approximately 18,500 fpm.

E N H A N C E D

C O N T R O L

S Y S T E M

Key Features

are carb-compliant.

• Large 16 x 7.5-8 Turf Master® drive tires on all 48" and 52" models for increased traction and overall performance (36": 16 x 6.50-8).

• Standard with 9 x 3.5-4 smooth tread, semi-pneumatic front caster tires, which nearly eliminate tire repair.

• Innovative blade engagement system provides ultra- smooth blade engagement and minimizes maintenance and repair costs associated with more expensive electric PTO designs.

See page 132 for Exmark® warranty details

3-Bushel Bagger............................................................... GC3602

Accessories & Attachments

®

TURF TRACER S-SERIES Key Features

1Units

Size

®

Engine Controls FS481V Kawasaki® ECS TTS481KA363 V-Twin FS481V Kawasaki® ECS TTS481KA363CA1 V-Twin FS481V Kawasaki ECS TTS481KA483 V-Twin Kawasaki ECS TTS541KA483CA1 FS541V V-Twin Kawasaki TTS600KAE483 FS600V V-Twin Electric Start ECS Kawasaki TTS600PKAE4831 FS600V Electric Start Propane ECS FS541V Kawasaki TTS541KA523 ECS V-Twin FS600V Kawasaki TTS600KAE523 V-Twin Electric Start ECS

TURF TRACER S-SERIES

Width

Model Number

Equipment Cover - Large................................................ 116-1379 Sulky Counterweight Kit.................................................103-2637 Mulching Kits............................................... Also refer to 124-125 36" unit....................................................................... MK363Q 48" unit....................................................................... MK483Q 52" unit....................................................................... MK523Q Operator Controlled Discharge..................................OCDWB01 StandOn........................................................................STANDON Turf Striping Kit........................................... Also refer to 106-107 36" unit................................................................... STRHPW36 48" & 52" unit........................................................ STRHPW48 For more information on Accessories see page 96-125

70

71

TURF TRACER S-SERIES

Blade Clutch

Deck Drive

36"

2

18.00"

103-6402 103-6382 103-6387

103-6392

116-5175

109-1057

103-6317

1-413094

3

16.25"

103-6401 103-6381 103-6386

103-6391

116-5177

109-1057

103-6317

1-413093

52"

3

18.00"

103-6402 103-6382 103-6387

103-6392

116-5175

109-1057

103-6317

1-413308

*Requires installation of Micro-Mulch accessory for proper mulching

Drive Wheels

Drive Wheels 48" & 52" s/n 319,999 & under and all 36"

Hub

Tire Only Rim Only

48" & 52" s/n 320,000 & over

Caster Wheels Semi-pneumatic

Complete

Tire Only

Rim Only

Complete

Complete

36"

1-602997 1-413474

1-603715

1-413474

1-613264

1-603715

1-613263

103-2171

48"

1-602997 1-413474

1-603715

1-413474

1-613264

1-603715

1-613263

103-2171

52"

1-602997 1-413474

1-603715

1-413474

1-613264

1-603715

1-613263

103-2171

Engines – FS481V, FS541V, & FS600V Kawasaki® V-Twin; FS600V Kawasaki V-Twin with propane conversion. All engines are governed to 3,600 rpm.

PTO Engagement – Mechanical blade engagement with blade brake.

Drive System – Twin Hydro-Gear® variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.

Hydro Fluid – Exmark Premium Hydro oil.

Speed – Infinitely variable selection from 0– 6.2 mph (10.0 kmph) forward, 0– 2.2 mph (3.5 kmph) reverse.

Fuel Capacity – 5-gallon (18.9-L) fuel tank. Propane unit has 20.0-lb (8.0 gallon) propane tank.

Style – Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.

Decks

Pump Drive

48"

Widths – 36" (91.4 cm), 48" (121.9 cm) or 52" (132 cm).

Deck Construction – 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.

Engine Deck – 7-gauge, heavy-duty welded steel.

Steering & Motion Control – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.

Front Caster Tires – Double-yoke, 9 x 3.5-4, smooth tread, semipneumatic.

Equipment

®

Low Lift

Belts eXtreme 2 Mulching* Mulching

®

Power Components

Solid Air Foil

TURF TRACER S-SERIES

Blades material is 0.20" thick alloy steel

Deck # of Blade Notched SPECIFICATIONS SPECIFICATIONS ((continued) continued) Size Blades Length Air Foil

Drive Tires – 1 6 x 7.5-8, 4-ply Turf Master® on all 48" and 52" models; 16 x 6.5-8, 4-ply Turf Master on 36" models.

Tracking Adjustment – Insta-Track.

Drive-Wheel Release – Allows unit movement without engine running.

Turning Radius – True zero-turn.

Safety Package – Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine.

Parking Brake – Lever-actuated mechanical compression.

Electric System – 12-volt battery, 15-amp alternator (only on electric start models).

Cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 5.40"-diameter cutter housing with 1.75"-diameter splinded blade drive and 1.0" diameter spindle shaft.

Blade-Tip Speed – Approximately 18,500 fpm.

72

73

Model Number

Weight

ECS

36"

UltraCut™ Series 2

481 lbs

78.0"

FS481V VH481KA362CA1 Kawasaki V-Twin

ECS

36"

UltraCut Series 2

486 lbs

FS481V Kawasaki V-Twin

ECS

48"

UltraCut Series 3

FS481V VH481KA483CA1 Kawasaki V-Twin

ECS

48"

UltraCut Series 3

™

VH481KA483

Defl. Down

Defl. Up

43.2"

47.0"

36.4"

$

78.0"

43.2"

47.0"

36.4"

$

531 lbs

78.0"

43.2"

57.9"

48.1"

$

536 lbs

78.0"

43.2"

57.9"

48.1"

$

Powered by FS481V Kawasaki V-Twin engine.

Available with 36" UltraCut Series 2 or 48" UltraCut Series 3 cutting decks.

Additional features include:

C O N T R O L

• High-clearance, well-balanced deck makes curb climbing and trailering easier.

• Blade-tip speed approximately 18,500 fpm.

• Large (16 x 6.5-8) Turf Master® rear tires provide increased traction and performance.

• 9 x 3.5-4 smooth-tread, semi-pneumatic front caster tires minimize tire repairs.

Accessories & Attachments

• Ground speeds up to 6.2 mph forward and 2.2 mph in reverse.

• Features Exmark®'s exclusive Enhanced Control System (ECS).

E N H A N C E D

74

Price

are carb-compliant.

Key Features

1Units

FS481V Kawasaki® V-Twin

Length Height

™

Deck

VIKING

VIKING

Controls

Size

VH481KA362

Key Features

Width Engine

See page 132 for Exmark warranty details

3-Bushel Bagger................................................................ GC3602 Equipment Cover - Large................................................116-1379 Sulky Counterweight Kit................................................. 103-2637 Mulching Kits................................................ Also refer to 124-125 36".................................................................................. MK362 48" unit........................................................................ MK483Q Operator Controlled Discharge...................................OCDWB01 StandOn.........................................................................STANDON For more information on Accessories see page 96-125

S Y S T E M

75

Blades

Blades

Length

Air Foil

36"

2

18.00"

48"

3

16.25"

Solid Air Foil

Mower Drive

Mulching*

103-6584

103-1578 103-6580

103-6582

116-5176

103-4760

1-323735

103-6583

103-1577 103-6738

103-6581

116-5178

103-4760

1-403174

*Requires installation of Micro-Mulch accessory for proper mulching

Drive Wheels

Drive Wheels All 36" & 48" s/n 439,999 & below and 790,000 & above

Hub

Tire Only Rim Only

Complete

36"

1-602997 1-413474

1-603715

1-413474

48"

1-602997 1-413474

1-603715

1-413474

48" s/n 440,000 to 789,000

Tire Only

Rim Only

Complete

Caster Wheels Semi-pneumatic

Complete 103-2171

1-613264

1-603715

1-613263

103-2171

Engines – FS481V Kawasaki® engine governed to 3,600 rpm.

PTO Engagement – Mechanical blade engagement with blade brake.

Engine Deck – 7-gauge, heavy-duty, welded steel.

Front Caster Tires – Double-yoke, 9 x 3.50-4, smooth-tread, semi-pneumatic.

Drive System – Twin Hydro-Gear® variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.

Drive Tires – 1 6 x 6.5-8, 4-ply Turf Master.

Steering & Motion Control – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.

Fuel Capacity – 5-gallon (18.9-L) fuel tank.

Widths Available – 36" (91.4 cm) or 48" (121.9 cm).

Deck Construction – 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.

®

Equipment

Hydro Fluid – Exmark Premium Hydro oil.

Speed – Infinitely variable selection from 0– 6.2 mph (10.0 kmph) forward, 0– 2.2 mph (3.5 kmph) reverse.

Style – Fixed-deck, side-discharge standard with molded discharge chute and option to bag or mulch.

Decks

eXtreme 2 Mulching

Low Lift

™

VIKING

Size

Pump Drive A-Section

VIKING

™

SPECIFICATIONS SPECIFICATIONS ((continued) continued) Deck # of Blade Notched

Power Components

Belts

material is 0.20" thick alloy steel

Tracking Adjustment – Insta-Track.

Drive-Wheel Release – Allows unit movement without engine running.

Turning Radius – True zero-turn.

Safety Package – Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine.

Parking Brake – Lever-actuated mechanical compression.

Cutting Height – 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.54 cm) increments.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 5.40"-diameter cutter housing and 1.0"-diameter spindle tube.

Blade-Tip Speed – Approximately 18,500 fpm.

76

77

Width FS481V Kawasaki® Pistol V-Twin

32"

MG481KA362

FS481V Kawasaki V-Twin

ECS

36"

MG481KA362CA

FS481V Kawasaki V-Twin

ECS

36"

MG481KA362P

FS481V Kawasaki V-Twin

Pistol

36"

MG481KA483

FS481V Kawasaki V-Twin

ECS

48"

MG481KA483CA1 FS481V Kawasaki V-Twin

ECS

48"

Pistol

48"

1

Length

421 lbs

73.0"

451 lbs

Height

Defl. Down

Defl. Up

43.0"

43.3"

32.7"

$

Price

78.0"

43.0"

47.0"

36.4"

$

456 lbs

78.0"

43.0"

47.0"

36.4"

$

451 lbs

73.0"

43.0"

47.0"

36.4"

$

501 lbs

73.0"

43.0"

57.9"

48.1"

$

506 lbs

73.0"

43.0"

57.9"

48.1"

$

501 lbs

73.0"

43.0"

57.9"

48.1"

$

Powered by FS481V Kawasaki V-Twin engine. vailable with 32" & 36" UltraCut Series 2 or 48" UltraCut A Series 3 cutting decks.

Additional features include:

• Ground speed 2.0 to 6.2 forward, with reverse assist.

• High-clearance, well-balanced deck makes curb climbing and trailering easier.

• Rear tires 13 x 5.0-6 Turf Saver® (32"); 13 x 6.5-8 Turf Master® (36" and 48").

• 9 x 3.50-4 smooth tread, semi-pneumatic front caster tires minimize tire repair.

C O N T R O L

Key Features

are carb-compliant.

E N H A N C E D

78

UltraCut™ Series 2 UltraCut Series 2 UltraCut Series 2 UltraCut Series 2 UltraCut Series 3 UltraCut Series 3 UltraCut Series 3

Weight

• Blade-tip speed approximately 18,500 fpm.

• Choose from Exmark®'s exclusive Enhanced Control System (ECS) or traditional pistol grip operator controls.

• Drive belts can be changed quickly and easily without the use of tools.

• Drive-wheel pulleys and brake drums are designed for simple, low-cost maintenance.

• Molded discharge chute standard.

Accessories & Attachments

1Units

FS481V Kawasaki V-Twin

Deck

®

METRO

Controls Size

MG481KA322P

MG481KA483P

Key Features

Engine

METRO

®

Model Number

See page 132 for Exmark warranty details

3-Bushel Bagger..............................................................GC3602 ECS Conversion Kit for Metro......................................103-2444 Equipment Cover - Large..............................................116-1379 Mulching Kits..............................................Also refer to 124-125 32" unit.........................................................................MK322 36" unit.........................................................................MK362 48" unit......................................................................MK483Q Operator Controlled Discharge................................ OCDWB01 For more information on Accessories see page 96-125

S Y S T E M

79

Blades material is 0.20" thick (s/n 130,000 & above) alloy steel

2 2 3

16.25" 18.00" 16.25"

103-6583 103-6584 103-6583

Low Lift

103-1577 103-6738 103-1578 103-6580 103-1577 103-6738

Belts eXtreme 2 Mulching* Mulching 103-6581 103-6582 103-6581

116-5178 116-5176 116-5178

Transmission

Wheel Drive

Blade Drive1

1-323280 1-323344 1-323734 1-323280 1-323288 1-323733 1-323280 1-323288 1-4031742

*Requires installation of Micro-Mulch accessory for proper mulching

32" 36" 48"

Caster Wheels Complete

Drive Wheels Wheel Tire Complete & Tire Only Assembly* 1-323346 1-323361 1-324193 1-323719 1-323720 109-4721 1-323719 1-323720 109-4721

Semi-pneumatic

103-2171 103-2171 103-2171

1 s/n

above 220,000 2 Single Belt

ECS Conversion KIt 103-2444 103-2444 103-2444

®

METRO

32" 36" 48"

Solid Air Foil

METRO

®

Deck # of Blade Notched SPECIFICATIONS SPECIFICATIONS ((continued) continued) Size Blades Length Air Foil

Engine – FS481V Kawasaki® V-Twin engine governed to 3,600 rpm.

Drive System – Direct drive from transmission to double-belt wheel drives (single belt on 32").

Transmission – 5-speed Peerless ® 700-070A. Speed Control –Padded shift lever.

Ground Speed – 2.0 mph (3.2 kmph) to 6.2 mph (10 kmph) forward, reverse assist.

PTO Engagement – Lever-actuated blade engagement with blade brake.

Fuel Capacity – 5-gallon (18.9-L) fuel tank.

Decks

Style –Fixed-deck, side-discharge standard with molded discharge chute and option to bag or mulch.

Equipment

Power Components

*Includes sheave and brake drum

Engine Deck – 7-gauge welded steel.

Steering & Motion Control – Gear drive with pistol grip, forward/ reverse assist or gear drive with Enhanced Control System (ECS), forward/reverse assist.

Turning Radius – Zero-turn around center of inside tire.

Front Caster Tires – Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic.

Drive Tires – 3 2": 13 x 5.0-6, 4-ply Turf Saver®; 36" and 48": 13 x 6.5-6, 4-ply Turf Master.® Safety Package – Operator Presence Controls (OPC). Operator must have transmission in neutral and blades disengaged to leave operator’s position without stopping engine.

Mechanical Parking Brake – Standard. Brake bands.

Widths Available – 32" (81.3 cm), 36" (91.4 cm) or 48" (121.9 cm).

Deck Construction – 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.

Cutting Height – 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.64 cm) increments.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 5.4"-diameter cutter housing and 1.0"-diameter spindle tube.

Blade-Tip Speed – Approximately 18,500 fpm.

80

81

Height2

Length

MSKABBC261

Engine

Size

FJ180V Kawasaki® KAI 26"

Controls Self-propelled

w/o with Weight handle handle 151 lbs

41.0"

®

2 varies

# of blades

Blade size

Standard

Mulch

Traction

1

26.10"

109-0343

103-6422

103-6114 3 s/n

44.0"

27.0" $

Price

with 0.5" cutting selections.

Blade Belt 5L3

Blade Belt, A4

116-0823

116-0861

790,000 and above 4 s/n 789,999 and below

owered by FJ180V Kawasaki KAI-Series engine, governed P to 3,600 rpm, featuring an improved air filtration system that increases reliability and reduces maintenance.

Additional features include:

• Belt-driven spindle protects crank shaft from blade impacts.

• 3-speed drive system with speeds from 2.0 to 4.1 mph.

• Cutting deck is constructed of cast aluminum to enhance maneuverability and includes a steel guard to increase durability.

• Blade Brake Clutch (BBC) enables operators to

disengage blades without shutting down the engine.

• Blade-tip speed approximately 18,500 fpm.

• Add mulching capabilities to your Metro ® 26 with optional mulch system or side-discharge kit.

Accessories

Increased productivity of 25% vs. traditional 21."

Key Features

is carb-compliant.

Power Components, Decks & Equipment

Key Features

Width

19.0"

®

82

with handle

Belts

1Unit

69.0"

w/o handle

METRO 26

METRO 26

Model Number

• Assisted rear-height-adjuster design, in combination with simple and dependable front-height adjusters, makes it easy to change cutting heights from 1" to 4" in 0.5" increments.

• Lightweight design, in combination with mower stance, rear engine positioning and large tires greatly reduces turf compaction.

See page 132 for Exmark® warranty details

Side Discharge Kit......................................................... 109-4800 Mulching Kits Includes Mulching Blade and Plug..................................... MK26 For more information on Accessories see page 96-125

Engine – FJ180V Kawasaki KAI engine; governed to 3,600 rpm.

Engine Deck – 1/4" die-cast aluminum.

Drive System – Self-propelled, rear-wheel gear-driven.

Transmission – 3-speed.

Speed – 2.0 mph (3.2 kmph) to 4.1 mph (6.6 kmph) forward.

Speed Control – Finger-tip bail control.

Style – Fixed-deck. Rear-discharge bagger standard, with option to mulch or side-discharge.

Width – 26" (66 cm).

Cutting Height – 1.0" (2.5 cm) to 4.0" (10.2 cm) in 0.5" (1.27 cm) increments.

Fuel Capacity – 1 gallon (3.8-L) fuel tank.

Bag Capacity – 3 bushels (24 gallons).

Drive Tires – 10 x 3-7, semi-pneumatic with die-cast aluminum rims with bearing assembly.

Blade-Tip Speed – Approximately 18,500 fpm.

Safety Package – Blade Brake Clutch (BBC).

83

Size

Controls

ECXKA211

FJ180V Kawasaki® KAI

21"

ECXHN211

GXV 160 Honda

Height with handle 38.0"

Width 22.0"

$

Price

21"

Self-propelled

112 lbs

62.0"

38.0"

22.0"

$

21"

Self-propelled

115 lbs

62.0"

38.0"

22.0"

$

ECXHNBBC211 GXV 160 Honda

21"

Self-propelled

117 lbs

62.0"

38.0"

22.0"

$

Blades - material is 0.135" thick alloy steel austempered to RC 38-44 Bagging

Low-Lift

Extreme 2 Mulching Medium Lift/Mulch

108-3759-03 108-3762-03 108-0954-03 116-5005

(standard)

116-4500

Front Wheels

Drive Wheels

9" (standard)

9.5"

9" (standard)

9.5"

109-8016

109-8026

109-8032

109-8022

Belts

Cables

Drive

BBC

Zone (Honda)

Zone (Kawasaki)

BBC

Drive

109-7299

110-1790

116-4443

116-0905

116-0901

116-0904

Powered by premium FJ180V Kawasaki KAI series or GXV160 Honda engines.

Additional features include:

• Commercial performance and durability.

• 5" deep cutting deck provides Exmark® signature cut and superior performance whether bagging or mulching.

• Innovative and durable front height adjustment

replacing traditional pivot style adjusters.

• Ground speeds from 0.0 to 4.2 mph.

• Single-point rear height adjustment allows operator to quickly change cutting height.

• Expanded cutting heights from 1.0" up to 4.5" in 0.5" increments for maximum cut quality.

• Blade Brake Clutch (BBC) enables operator to disengage blades without shutting down the engine.

• Front engine guard protects valve cover and head gasket from being damaged on trailers and helps when lifting.

Key Features

are carb-compliant.

Accessories

Key Features

Length with handle 62.0"

ECXKABBC211 FJ180V Kawasaki KAI

1Units

84

Self-propelled

Weight 114 lbs

Power Components, Deck & Equipment

COMMERCIAL 21 X-SERIES

Engine

COMMERCIAL 21 X-SERIES

Model Number

• Formed, steel-wear plates, are strategically placed on the edges of the cutting deck to ensure that the deck is not damaged from impacts and abrasions.

• Drive and OPC bails are foam-coated to minimize

vibration and fatigue.

• 1-gallon fuel capacity.

• Mulch plug and rear door handle standard.

See page 132 for Exmark® warranty details 9.5" Diameter Tire Kit......................................................109-9328 Wheel Weight Kit.............................................................109-9331 For more information on Accessories see page 96-113

Engine – FJ180V Kawasaki KAI engine governed to 3,300 rpm; GXV 160 Honda engine governed to 3,300 rpm.

Engine Deck – 5"-deep, 1/4"-thick die-cast aluminum.

Drive System – Self-propelled; rear-wheel gear-driven.

Transmission – Infinitely variable speed selection, dual wheel drive.

Speed – 0.0 mph to 4.2 mph (6.6 kmph) forward.

Speed Control – Fingertip control.

Style – Fixed-deck, rear-discharge bagger and mulch plug standard.

Width – 21" (53.3 cm).

Cutting Height – 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.

Fuel Capacity – 1 gallon (3.8-L).

Bag Capacity – 2.5 bushels (20 gallons).

Drive Tires – 9" x 2.5", semi-pneumatic.

Blades – 1-20.5" blade.

Blade-Tip Speed – Approximately 18,500 fpm.

Safety Package – Zone start/Blade Brake Clutch (BBC).

85

Controls

Weight

Length with handle

Height with handle

Width

ECSKAP21

FJ180V Kawasaki® KAI

21"

Push Zone

107 lbs

62.0"

38.0"

22.0"

$

ECSKA21

FJ180V Kawasaki KAI

21"

Self-propelled Zone

112 lbs

62.0"

38.0"

22.0"

$

Blades - material is 0.135" thick alloy steel austempered to RC 38-44 Bagging

Low-Lift

Extreme 2 Mulching Medium Lift/Mulch

108-3759-03 108-3762-03 108-0954-03 116-5005

(standard)

Front Wheels 9.5"

109-8016

109-8026

116-4500

9" (standard)

9.5"

109-8032

109-8022

Cables

Belts

Zone (Kawasaki)

Drive

116-0905

116-0904

• Commercial grade and performance in a value-packaged trim and finish mower.

• Simple design for maximum balance and ease of maneuverability.

• Ground speeds from 0.0 to 4.2 mph.

• 5"-deep cutting deck provides Exmark® signature cut and superior performance whether bagging or mulching.

• Easy on/off bag design eliminates the need for levers and doors.

• Front height adjust and single-point rear height adjust allows for easy handling and change in cutting height.

• 2-quart integral fuel tank.

See page 132 for Exmark® warranty details

Accessories

Drive 109-7299

Additional features include:

Price

Drive Wheels

9" (standard)

1 Gallon Tank Kit............................................................. 109-9333 Coated Bail OPC/BBC.................................................... 109-8442 Coated Bail Drive............................................................ 109-8443 Deck Wear Kit...................................................................109-9329 Door Handle Kit...............................................................109-9326 Engine Guard...................................................................116-0522 9.5" Diameter Tire Kit......................................................109-9328 Mulch Plug........................................................................116-0251 Wheel Weight Kit.............................................................109-9331 For more information on Accessories see page 96-113

Power Components, Decks, Equipment

COMMERCIAL 21 S-SERIES Key Features

Size

COMMERCIAL 21 S-SERIES

Engine

Powered by Kawasaki commercial-grade FJ180V engine in push or self-propelled.

86

Model Number

Engine – FJ180V Kawasaki KAI engine governed to 3,300 rpm.

Engine Deck – 5"-deep, 1/4"-thick die-cast aluminum.

Drive System – Hand-push (ECSKAP21). Self-propelled; rearwheel, gear-driven (ECSKA21).

Transmission – Infinitely variable speed selection, dual wheel drive.

Speed – 0 to 4.2 mph (6.4 kmph) forward on self-propelled model.

Speed Control – Fingertip control.

Cutting Deck – 21" (53.3 cm).

Cutting Height – 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.

Fuel Capacity – 2 quart integral fuel tank Bag Capacity – 2.5 bushels (20 gallons).

Drive Tires – 9" x 2.5", semi-pneumatic.

Blades – 1-20.5" blade.

Blade-Tip Speed – Approximately 18,500 fpm.

Safety Package – Zone start

87

FJ180V Kawasaki KAI

21"

®

Price $

Model Number

Engine

ARX340HN24 GXV 340 Honda

Weight

Length

Height

Width

Weight

Length

320 lbs

(handle folded) 48"

(handle folded) 38"

30"

TBA

59"

includes one (handle up) 58"

®

Size

Price

24"

$

Height

Width

49"

(handle up) 46"

Additional features include:

• Easy to use controls - Intuitive operation.

• Optional removable suitcase weights. One 30 lb. weight is standard and three additional 30 lb. weights are optional (one front and two rear weights).

• Low effort maneuverability as compared to competitive offerings.

• Split tine shaft with independent idlers for easier turning with tines engaged.

• Self-cleaning tines.

• Folding handle.

• Single bail traction control.

• Easy to replace tines.

• Lever control tine engagement.

• 1-year limited warranty.

Key Features

30 lb wt

See page 132 for Exmark® warranty details.

Engine – FJ180V Kawasaki KAI recoil start.

Fuel Capacity – 1 gallon (3.8-L).

Working Width – 21" Rear Tires – 10 x 2.75-5.5 solid.

Front Tires – 11 x 4-4.

Transmission – Hydro-Gear® T2.

Drive – #40 chain. # of Tines – 36 coring tines.

Core depth – 2" to 3".

Aerating Speed – 4.0 mph.

Plugs/square foot – 4.6.

36"

Powered by GXV 340 Honda engine.

Additional features include:

• Easy to use controls - Intuitive operation.

• Removable suitcase weights. Includes two 30 lb. weights.

• Low effort maneuverability as compared to competitive offerings.

• Split tine shaft with independent idlers for easier turning with tines engaged.

• Self-cleaning tines.

• Easy to replace tines.

• Lever control tine engagement.

• 1-year limited warranty.

Specs

21" AERATOR S-SERIES Key Features Specs

ARS180KA21

Size

24" AERATOR X-SERIES

Engine

Powered by FJ180V Kawasaki KAI series engine.

88

Model Number

See page 132 for Exmark® warranty details

Engine – GXV 340 Honda recoil start engine.

Fuel Capacity – 1-gallon (3.8-L).

Working Width – 24" Rear Tires – 13 x 6.0-6.

Front Tires – 9 x 3.5-4 semi-pneumatic casters.

Transmission – Hydro-Gear® EZT. Drive – #40 chain. # of Tines – 36 coring tines.

Core depth – 2" to 4".

Aerating Speed – 6.5 mph.

Plugs/square foot – 4.0.

89

Weight

Length

1015 lbs

65"

30" Height 53"

$

Engine

Size

Price

SD270HN20

Honda GX270

20"

$

Weight

Length

48"

260 lbs

(handle folded) 27"

(handle folded) 28"

(handle up) 52"

(handle up) 45"

• Easy to use controls - Intuitive operation.

• Weight directly over tines to maximize core depth.

• Compact size as compared to competitive offerings.

• Split tines for easier turning with tines engaged.

• Self-cleaning tines.

• Easy to replace tines.

• Foot pedal for tine engagement.

• Tine down - force hydraulic actuated (also adjustable).

• 1-year limited warranty.

See page 132 for Exmark® warranty details

Engine – FS481V Kawasaki electric start engine.

Fuel Capacity – 5 gallons (18.9-L).

Working Width – 30" Rear Tires – 16 x 6.50-8 Front Tires – 13 x 5-6 semi-pneumatic casters Transmission – Hydro-Gear® ZT3400 Drive – #50 chain # of Tines – 48 coring tines Core depth – 2" to 5".

Aerating Speed – 7.0 mph.

Plugs/square foot – 4.6.

®

Width

Additional features include:

Model Number

Key Features

FS481V Kawasaki

®

Price

Height

Width 30"

Powered by Honda GX270 engine.

Additional features include:

• Easy to maneuver and operate.

• The wide stable base delivers good side hill stability and even cutting Verticutting reel.

• Integrated lift handles and foldable handles improve transport and storage.

• Blades - Increase seed/soil contact, removes thatch, and high-carbon steel for improved durability.

• Seed mixer is regulated by ground speed for even distribution.

• 1-year limited warranty.

Specs

30" STAND-ON AERATOR Key Features Specs

SAR481KA30

Size

20" SLICER SEEDER

Engine

Powered by FS481V Kawasaki engine.

90

Model Number

See page 132 for Exmark® warranty details

Engine – Honda GX270 engine.

Fuel Capacity – 5.6 quarts (5.3-L).

Clutch – Noram mechanical MC40B Tires – 11 x 4-4 Cutting Depth – Adjustable up to 1" deep Seeding / Slicing Width – 20" Hopper Size – 40 lbs.

91

Size

TR160HN18

Honda GX160

18"

®

Weight

Length

125 lbs

(handle folded) 27"

(handle folded) 23"

Height

(handle up) 43"

(handle up) 39"

Price $

Model Number

Engine

Price

SG200HN

Honda GX200

$

Weight

Length

Height

Width

28"

110 lbs

50"

42.3"

22"

Powered by GX160 Honda engine.

Additional features include:

• Easy to use - Lightweight, intuitive operating power rake with on-handle throttle for quick speed adjustment.

• Thatch removal - The 24 flail blades remove heavy thatch bringing increased oxygen and sunlight to the turf.

• The centrifugal clutch eliminates noise and maintenance of belt tensioners.

• Simple folding handle.

• 1-year limited warranty.

Model Number

Engine

Price

SG390HN

Honda® GX390

$

Weight

Length

Height

Width

240 lbs

76"

42"

29.5"

92

Powered by GX200 and GX390 Honda engines.

Additional features include:

• 4 lift handles to load and unload into vehicle.

• Great Balance and Rubber gaskets translate to smooth operation that does not "pull" operator into the stump as it is being cut.

• 9.5" Quadra-blade, 12-tips cut smoothly like a router and does not beat on the stump.

• Reliability - Blade Sharpening Service keeps teeth sharp, extends life of machine and increases customer satisfaction on the job.

• Blade can be accessed easily with 2 - 9/16 wrenches and 8-bolt removal for quick change cut.

• Handle folds down on SG200HN model.

• 1-year limited warranty.

SG200HN

See page 132 for Exmark® warranty details

Engine – Honda GX200 engine.

Belt – Cogged belt.

Clutch – Centrifugal.

Cutting Depth – 6" below grade.

Cutting Height – 10" above grade.

Cutting wheel – 9.5"-diameter (12-tooth).

SG390HN

Specs

See page 132 for Exmark® warranty details

Engine – GX160 Honda recoil start engine.

Fuel Capacity – 3.3 quarts (3.1-L).

Operating Width – 18" (32 flail blades on 1" spaces).

Blades – Hardened high-carbon steel.

Clutch – Centrifugal clutch.

Tires – 10 x 2.75-5.5 solid

®

Width

Key Features

18" TURF RAKE Key Features

Engine

STUMPGRINDER

Model Number

Engine – Honda GX390 engine.

Belt – Double 3V belt.

Clutch – Centrifugal.

Cutting Depth – 11" below grade.

Cutting Height – 14" above grade.

Cutting wheel – 9.5"-diameter (12-tooth).

93

Navigator®

Pioneer® S-Series

Quest E-Series

Vantage®

94

• • • • • • • •

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • •

• • • • • •

• • • • • •

• • • • • •

•

•

•

•

•

• •

• •

• • • • • • •

• •

• •

• • • •

• • • • • • •

• • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • •

• • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • •

• •

•

• • • • • •

• • • • • •

• • • •

• • • • •

• • • • • •

• • • • • •

• • • • •

• • • • • •

• • • • • •

• • • • •

Anti-Scalp Roller Kit

Hourmeter Kit

• • • • • • • • • • • • • • • • • • • • • • • • • • •

OCD

• • • • • • • • • • • • • • • • • • • • • • • •

Front Weight Set

Dual Tail Wheel

Removable Dump Tub Kit

Snow Blade

Snow Blower

Non-Powered Bagger

Fill Reduction Kit

Power Deck Lift

Trash Container

3-Bushel Adapter

Equipment Cover

CustomRide Suspension Seat Full-Suspension Seat 3-D Motion Isolation System Extended Driver Lever Kit 12 Volt Power Adapter Hydro Maintenance Kit 3-Bushel Side Catcher

Jack & Receiver

Hitch Kit

• • • • • • •

Lazer Z E-Series

• • • • • • • • • • • • • • • • • • • • • • • •

Sun Shade

UltraVac (Needs UV Drive Kit)

•

QTE651KA421 QTE691KA501 VT541KA363 VT651KA484 VT691KA524 VT730EKC524 VT740EKC604

Lazer Z S-Series

•

Striper

Mulch Kit

QTS691KA501

Lazer Z X-Series

• • • • • • • • • • • • • • • • • • • • • • • •

Light Kit

Model #

Quest® S-Series

Product

RIDER & STAND-ON ACCESSORIES

• • • • • • • • • • • • • • • • • • • • • • • •

RIDER & STAND-ON ACCESSORIES

• • • • • • • • • • • • • • • • • • • • • • • •

Pioneer E-Series

LZDS902K605 LZDS902K725 LZX680KC486 LZX740KC526 LZX740KC606 LZX749EKC606 LZX801KA606 LZX801KA606SS LZX940KC606 LZX940KC726 LZX980KC606 LZX980KC726 LZS651KA484 LZS680KC524 LZS730EKC604 LZS740KC524 LZS740KC604 LZS749EKC724 LZS801KA724 LZS801PKA604 LZS801PKA724 LZE600KA484 LZE691KA524 LZE740KC604 NAV640KC NAV730EKC NV740KC CD42CD CD48CD PNS600KA443 PNS651KA483 PNS680KC523 PNS740KC604 PNE651KA482 PNE691KA522

Lazer® Z DS-Series

• • •

• • •

• • •

• • •

• •

•

• • • • •

• • • • •

95

96

One Gallon Tank Kit

Door Handle Kit

Coated Bail

ECSKAP21

•

•

•

•

•

•

•

ECSKA21

•

•

•

•

•

•

•

Side-Discharge Kit

Deck Wear Kit

Commercial 21 S-Series

Engine Guard

Commercial 21 X-Series

Mulch Plug

Metro 26

•

•

•

•

•

•

•

•

•

TTX650EKCE524

•

•

•

•

•

•

TTX650EKCE604

•

•

•

•

•

•

TTX691KAE524

•

•

•

•

•

•

TTX691KAE604

•

•

•

•

•

•

TTX691PKAE524 TTX691PKAE604

• •

• •

• •

• •

• •

• •

Walk-Behind Weight Set

•

•

ECS Handle Kit

•

ECXHNBBC21

Striper

•

StandOn

•

ECXHN21

Equipment Cover

•

•

OCD

•

ECXKABBC21

3-Bushel Bagger

ECXKA21

Mulch Kit

9.5" Diameter Tire Kit

Metro®

Wheel Weight Kit

Viking™

•

•

Model #

Product

WALK-BEHIND ACCESSORIES

Turf Tracer S-Series

•

TTX640KCE604

TTS481KA363

•

•

•

•

•

•

•

TTS481KA483

•

•

•

•

•

•

•

TTS541KA523

•

•

•

•

•

•

•

TTS600KAE483

•

•

•

•

•

•

•

TTS600KAE523

•

•

•

•

•

•

•

TTS600PKAE483

•

•

•

•

•

•

•

VH481KA362

•

•

•

•

•

•

VH481KA483

•

•

•

•

•

•

MG481KA362

•

•

•

•

MG481KA483

•

•

•

•

MG481KA322P

•

•

•

•

•

MG481KA362P

•

•

•

•

•

MG481KA483P

•

•

•

•

•

MSKABBC26

•

WALK-BEHIND ACCESSORIES

Turf Tracer® X-Series

TTX640KCE524

•

97

OPERATOR COMFORT

The Lazer Z S-Series Tilt Frame & 3-Dimensional Isolation System give you full-featured comfort in an affordable package. The CustomRide Seat Suspension delivers comfort enhancement on both the Lazer S-Series and Lazer X-Series.

And for the smoothest ride in the industry, Exmark's Premium Suspension Seat is now available for either platform.

Lazer Z S-Series Operator Comfort Good Better Best

Standard

Tilt Frame & 3-D Isolation System Kit Get full-featured Lazer comfort for your Lazer AS by adding the Tilt Frame & 3-D Isolation System. Designed for ease of maintenance access, the tilt feature maintains a low-profile on four independent isolation mounts to smooth your ride.

Model # Application 116-0941

Fits Lazer Z Series, Lazer Z and Lazer Z ASX models with S/N 790,000 & above. Fits Lazer Z AS S/N 790,000 to 849,999.

Tilt Frame & 3-D Isolation System Kit

Full-Suspension Seat

Full-Suspension Seat w/ Tilt Frame & 3-D Isolation System Kit

Designed to fit all Lazer models, this low-profile package, FullSuspension seat enhances operator comfort and lumbar support by adjusting to individual weight and preferred seat-back angle. Includes seat belt.

Lazer Z X-Series Operator Comfort Good Better Best

OPERATOR COMFORT

Enhance your Lazer ride with a comprehensive set of operator comfort options. Standard Lazer seats give the operator a good, reliable ride. Now, optional components enable you to increase your comfort level even more.

Standard CustomRide Seat Suspension System Model # Application

Full-Suspension Seat

116-7234 Fits all Lazer Z models with S/N 790,000 & above.

116-4678 Fits Pioneer models.

Full-Suspension Seat A great value in comparison to more expensive full-suspension seats, our CustomRide suspension system easily mounts to your existing EVC operator seat. System features enable operator to customize suspension settings per individual's weight and personal preference.

This low-profile, Full-Suspension seat enhances operator comfort and lumbar support by adjusting to individual weight and preferred seat-back angle. Includes seat belt.

Model # Application LSSeat Fits all Lazer Z with S/N below 790,000.

Model # Application 116-0062

Fits all Lazer Z models with S/N 790,000 & above except Diesel, LZE and LZA models.

103-4754 Fits all Lazer Z,速 CT, HP, AS with S/N below 790,000.

98

99

ACCESSORIES & ATTACHMENTS

Extended Driver Lever Kit Improve your elbow room while you operate with extended drive levers.

Conveniently located for ease of use. Great for phone chargers, or any other operator comfort accessory.

Model # Application

Model # Application 109-9694 Fits all Lazer Z models with S/N 790,000 & above except Diesel models.

Hitch Kits Enables owners to add attachments to their full-size Next Lazer Z models. 80 lb. capacity increases productivity by towing light implements and yard carts.

Anti-Scalp Roller Kits Provides maximum protection scalping in tough terrain.

from

Model # Application

Model # Application

116-4607 Fits Lazer Z X-Series & Lazer Z

S-Series 72" decks.

109-9487 Fits all Lazer Z Series models with S/N 790,000 &

above except diesel models.

116-4614 Fits Lazer Z X-Series &

Lazer Z S-Series 60" decks.

1-631665 Both Lazer Z models and Lazer Z AS with S/N below 790,000.

116-4616 Fits Turf Tracer 52" & 60" decks.

116-5305 Fits Vantage 36" unit - right front corner

1-651234 Lazer Z HP and Lazer Z CT S/N 510,000 and above models.

116-4608 Fits Vantage 48" & 52" units - front of deck

103-9565 All Lazer Z DS-Series, D-Series, XS & XP models.

116-4614 Fits Vantage 60" unit - left rear corner

109-6245 Pioneer S- and E-Series

Equipment Cover

Hydro maintenance kit

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It's constructed out of tough 600-denier polyester, making it abrasion and tear resistant. It's elastic opening provides a secure, snug fit.

Model # Application 116-1378 Small - Fits Quest and Phazer units.

116-1379 Large - Fits Lazer Z & all other units excluding 72" decks and Navigator models.

100

116-1065 Fits Lazer Z models with S/N 790,000 & above. Does

not fit Lazer Z D or DS-Series.

ACCESSORIES & ATTACHMENTS

12-Volt Power Adapter

Includes 4 bottles of Exmark premium hydraulic oil, 1 belt and 2 hydro filters.

Model # Application 116-3270

For use with Lazer Z X-Series & Lazer Z S-Series Lazer Z (LZZ) with (790,000 & above) Lazer Z Advantage Series X (LZAS 850,000 to 919,999) Lazer Z Advantage Series (LZAS 790,000 to 849,999)

116-3282

For use with Lazer Z E-Series Lazer Z Advantage Series (LZA) with (850,000 & above)

101

ACCESSORIES & ATTACHMENTS

Jack & Receiver Safely and easily access the underside of your zero-turn mower's deck. Once receiver is mounted to frame, jack attaches for smooth lift without hassle or strain, thanks to the comfortable ergonomic design. Built for years of reliability.

Model # Application 109-9828 Quart bottle 116-1218 Gallon container

Premium Engine Oil Using a synthetic formulation far more stable and robust than inexpensive oil from your local auto parts store or big retail outlet. Exmark premium is the right choice for your mower.

Model # Application 116-3373 Quart bottle 116-3374 55-gallon drum

Premium Fuel Treatment Engineered to rapidly dissolve carbon & varnish deposits. Quickly cleans injectors, rings, carburetor, valves and fuel line. One treatment delivers immediate results for older engines. Regular use helps engines last longer at peak performance. E10 Ethanol approved.

Model # Application 116-5991 8 oz. bottle 116-5992 16 oz. bottle

Model # Application

116-1049 Receiver - Fits Lazer Z X- and S-Series models with S/N

790,000 & above.

116-5701 Receiver - Fits Lazer Z E-Series with S/N 920,00 & above

and Lazer Z Advantage with S/N 850,000 to 919,999.

116-1571 Receiver - Fits Lazer Z DS-Series and Pioneer S- and

E-Series, and Lazer Z with S/N 790,000 & below 116-4414 Receiver - Fits Vantage 36" 116-3300 Receiver - Fits Vantage 48," 52" & 60" 116-1563 Receiver - Fits Quest SP and Quest with S/N

790,000 to 919,999 116-1351 Jack - Fits Lazer Z models with S/N 790,000 & above.

ACCESSORIES & ATTACHMENTS

Premium Hydro Oil Designed for today's more demanding hydraulic systems to enhance control performance. Delivers superior antiwear protection and twice the shear stability of competing oils. For use with any Exmark hydraulic system.

Light Kit Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella™ Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact and can even take on highpressure cleaning. With twice the illumination output of a conventional work lamp. The kit also features a pivot base and easy bulb replacement.

Model # Application 116-1154 Fits all Lazer Z and Pioneer models with ROPs with S/N 260,000 and above.

103-7745 Replacement Bulb Kit (one bulb).

NAVLKIT Fits all Navigator models.

102

103

ACCESSORIES & ATTACHMENTS

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. It's electronic motor features Exmark's signature durability and a low profile design that leaves plenty of trailer space.

Model # Application 116-5000 116-6512 116-4764 116-4765

Pioneer E-Series models.

50" Quest S-Series 42" Quest E-Series 50" Quest E-Series

Micro-Mulch System

Model # Application

116-2517 Fits all 48" - 72" Lazer Z models with S/N 850,000 & above.

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf.

Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Sun Shade Easily mounts to 2-post foldable Rollover Protection System (ROPS).

Made of heavy-duty, water repellent canvas for maximum durability.

Quickly and easily removable for transport. Fits all Exmark compact and full-size Lazer Z mid-mount mowers and FrontRunner. Does not

Model # Application See page 124-125 fit Quest.

Operator Controlled DischargE Innovative foot control delivers greater productivity than traditional hand-operated designs. The blocker door opens and closes allowing user to quickly and effectively control discharge when mowing around mulch beds, parked cars, homes or windows. (Infinitely adjustable blocker door.) Easily installs and removes without tools.

Model # Application

ACCESSORIES & ATTACHMENTS

Power deck lift

Non-Powered Bagger Great for fall and spring clean as well as day-to-day collection of grass clippings. This optional, 2-bag system features a 6-bushel collection capacity. After original mounting, the system attaches and detaches quickly and easily without the use of tools.

Model # Application 116-0513

Fits any Exmark model with ROPS.

Trash Container Conveniently located within easy reach of the operator, this trash container features a 2.5窶組allon capacity and a durable, easy-to-clean mesh receptacle.

Model # Application TC26 Fits all Lazer Z models.

116-3297

Fits Vantage models.

OCD02 Fits all Lazer Zﾂｮ UltraCut邃｢ Series 4 & 6 models. with S/N 790,000 & above.

OCDWB01 Fits Vantage 36," 48" & 52" and wide area walks.

116-4248 Required for Vantage 36" fit-up

104

105

ACCESSORIES & ATTACHMENTS

Model # Application 109-5081

116-6657

Fits 48," 52" & 60" Lazer Z decks with S/N 790,000 & above.

Striper Extender Kit for 109-5081.

109-5080 116-6658

Fits 72" Lazer Z decks with S/N 790,000 & above.

Striper Extender Kit for 109-5080.

116-6655

Fits 48," 52" & 60" Lazer Z decks with S/N 790,000 & above. Vertical height adjustment and extension rollers on ends.

116-6656

Fits 72" Lazer Z decks with S/N 790,000 & above.

Vertical height adjustment and extension rollers on ends.

116-5297

Fits Pioneer S-Series

116-5084

Vantage 36"

116-5320

Vantage 48," 52" & 60"

Turf Striping Kit Exmark ® has an unmatched reputation for delivering its see-it-tobelieve-it quality of cut.

Now you can enhance the striping performance and produce beautifully manicured lawns with this durable and easy-to-use roller system.

• Allows you to mow and roll at the same time.

• Constructed of heavy-duty stainless steel.

• Easily adjusts for varying cutting-height settings.

• Does not affect ability to get up and over curbs.

• Easy to service and maintain.

Part Number

Turf Striping Kit Accessory

STRFMD

For all FMD 523, 524, 603, 604 decks on Turf Tracer Hydros-TTX (excludes Turf Ranger®).

STRLZ52

For all full-size 52" Lazer Z models (523 and 524 decks).

STRLZ60

For all full-size 60" Lazer Z, Lazer Z ASX, Lazer Z AS models and Lazer Z® CT 60" (603 and 604 decks) (excludes XP’s & XS’s).

STRLZ60XP

For all 60" Lazer Z XS and XP models.

STRLZ72

For all 72" full-size Lazer Z, Lazer Z ASX, Lazer Z XS and Lazer Z XP models (724 decks).

STRHPW36

For all 36" TTHP/TTS models.

STRHPW48

For all 48" and 52" TTHP/TTS models.

STRLHP5

For all 46", 50" and 56" Series 5 cutting decks.

STR605

For all 60" Series 5 cutting decks.

STR665-725

For all 66" and 72” Series 5 cutting decks.

120-7905

For Quest E-Series.

Quest units with S/N 920,000 to 999,999.

ACCESSORIES & ATTACHMENTS

106

Turf Striping Kit Produce beautifully manicured lawns with this durable and easy-to-use roller system. Roller now made with high impact, high density polyethylene.

No more costly bearings to maintain. Easy height adjustment.

107

ACCESSORIES & ATTACHMENTS

UltraVac collection systems make it even easier for you to maximize your productivity.

Quick-attach design enables easy switching from bagging to side-discharge, without tools, in minutes.

Model # Application See page 114-121.

Manage clippings between partial mulch and bagging operations.

Reduce material collection by 50%.

Model # Application 109-5458 Fits all Navigator models. Standard on

670,000 & above models.

Navigator Auto Door Kit Enhance your productivity with this quick opening auto door system.

Model # Application 109-5459 Fits all Navigator models.

Navigator® Blade Featuring a 48" width, the snow blade can be angled 20° either right or left. It utilizes a ground scraper constructed of carbon steel that is reversible, to double its productivity.

Requires Quick Hitch Attachment System and attaches without tools.

Model # Application NAVSBLD48 Fits all Navigator models

Navigator Snow Blower Constructed of lasting 12- and 16-gauge steel, this heavy-duty, twostage blower attachment features a 4-blade impeller. Blower controls and the rotational chute are easily maneuvered from the operator’s position. Requires Quick Hitch Attachment System and attaches without tools.

Navigator Dump Tubs Debris can be quickly and conveniently managed with our two polyethylene tub inserts. These removable tubs enable the weight of a full, 9.5-bushel hopper to be split and unloaded one tub at a time.

Model # Application 116-1429

Fits all Navigator models.

ACCESSORIES & ATTACHMENTS

Navigator Fill Reduction Kit

Ultravac systems

Navigator Quick Hitch Attachment System This durable hitch system replaces the out-front mowing deck without tools and makes it easy to connect or remove attachments. To enhance in-use productivity, blower or blade attachment can be raised or lowered from operator position.

Model # Application NAVSUBFRM01 Fits all Navigator models

Model # Application NAVBLWR44 Fits all Navigator models

108

109

ACCESSORIES & ATTACHMENTS

GC3602

Fits Lazer Z X-, S-, E-Series, Pioneer S-Series and Vantage.

(VT36 requires adapter 116-4248)

116-4248

Required for Vantage 36" fit-up.

GC36MC

Fits all wide area walks excluding Phazer.

116-4091

Applies only to the GC36MC. This adapter is needed for Vantage, Lazer Z s/n 600,00 and above, Pioneer, Quest SP, & Quest s/n 919,999 & below.

models.

Model # 103-2637

Add weight to the front end of your Exmark walk-behind. Beneficial for use with Exmark StandOn to enhance stability and control.

Comes in pairs. Each weighs 9.5 pounds. Excludes Turf Tracer X-Series

Metro 26 Side Discharge Kit Quickly change your Metro 26 from rear bagging to side discharge.

Model # Application

109-4800 Fits Metro 26

StandOn

Model # STANDON

ACCESSORIES & ATTACHMENTS

Model # Application

Increase productivity while reducing work load with this pull-behind sulky. Uses an innovative QuikMount system and convenient, springloaded latch. Expanded operator deck with foot guard for safer, more comfortable riding.

110

Walk-Behind Weight Set

3-Bushel Bagger Lightweight and easy to attach, this three-bushel grass bagger fits all Exmark ® side-discharge walkbehind and riding mowers.

Exclude Commercial 21," Metro® 26" & Phazer.™

Metro 26 Mulch Kit Easily transition from bagging to mulching.

Model # Application MK26

Fits Metro 26

111

ACCESSORIES & ATTACHMENTS

Commercial 21 Gas Tank

For extended cut height, tough terrain or when lowered rolling resistance is needed, this largerdiameter wheel kit improves your productivity.

Model # Application

Maximize your mowing with increased fuel capacity. The 1-gallon gas tank fits easily onto your engine to provide optimum productivity.

Easily transition from bagging to mulching.

Prolong the life of your deck in the toughest conditions with this heavyduty deck wear kit.

109-9329 Fits all Commercial 21's.

Model # Application

Commercial 21 wheel weight kit Enhance your productivity in wet conditions with this wheel weight kit.

Each wheel plate weights 3 pounds to give you excellent performance, even with a full load of grass.

Protect your engine from impact when mowing around low-hanging branches and other obstacles.

116-0522 Fits all Commercial 21's .

112

116-0251 Fits all Commercial 21's.

Commercial 21 Engine Guard

Model # Application

Commercial 21 Mulch plug

Commercial 21 Deck wear kit

Model # Application

Model # Application 109-9333 Fits all Commercial 21's.

109-9328 Fits all Commercial 21's.

ACCESSORIES & ATTACHMENTS

Commercial 21 9.5" diameter wheels

Model # Application

109-9331 Fits all Commercial 21's.

113

SPECS ULTRAVAC E-SERIESULTRAVAC & S-SERIES®SPECS

• Compact design minimizes trailering space and lets you easily maneuver around obstacles.

S-Series (LZUV2B) E-Series (116-3001) • Precisely balanced to maintain exceptional stability.

Lazer Z Lazer Z PNS PNS Low Cost, Low Maintenance 48" 52" 52" 48" ® • With no auxiliary engine, the UltraVac runs quietly and Overall unit dependably with minimal maintenance.

102.25" 102.25" 97.0" 97.0" length with (259.7 cm) creates (259.7 high-velocity cm) (246.4 cm) (246.4 • Unique impeller design airflow and cm) bagger improved collection-system performance.

Overall unit • Large-diameter, smooth-discharge handles large62.0" 67.75" 62.50" tube 58.0" width with of debris with less clogging. volumes (172.1 cm) (158.8 cm) (147.3 cm) (157.5 cm) bagger • Abrasion-resistant steel blower housing and impeller maximize blower life.

Total bagging 266 lbs 309 reduces lbs 168 lbs 168 • Debris-bypass impeller design horsepower drawlbs system (140 kg) (76 kg) (76 kg) and clogging.(120 kg) weight

Productivity Collection Bags – 2 commercial-grade, cloth-mesh bags • Commercial-grade cloth mesh maximizes airflow and with reinforced bottoms. debris compaction—you’ll collect more debris per bushel Totalfor Collection Capacity – 8 bushels. increased capacity.

Dump Mechanismbags – Manual lift off.

• Lightweight with polyethylene bottoms mount Blower Tubefor – 6.0"-diameter, fixed, abrasion-resistant, simply fast, easy emptying. molded polyethylene.

• Grass discharge from the QDS is accomplished in one Impeller – 5-bladed, thick, abrasionsimple motion of1/4" the (6.4mm) release handle. resistant steel withreduce verticaldust axis.around 13.0" diameter.

• Sealed hood engine and operator.

Impeller Axisproduction – Vertical. unit applications listed. Exmark • Current Impeller Housing – offers an UltraVac to fit virtually every zero turn rider model.

Consult on-line accessory look up for older S-Series - 0.187" thick,the abrasion-resistant steel. applications not listed here: www.exmark.com E-Series - 0.135" thick, steel.

Bearings – 1" (2.54 cm) sealed, non-greaseable bearings.

* Since bagging normally requires more horsepower than sidedischarge operation, depending on cutting conditions, higherhorsepower models may provide more efficient bagging capability.

ULTRAVAC E-SERIES & S-SERIES SPECS

2-bagger option

Flexibility S-Series Bagger (LZUV2B) ® -engineered For full-size 48" and 52" Lazer Z system, models with s/n 790,000 & • Eall xmark collection designed above. exclusively to fit Exmark zero-turn riders.

E-Series Bagger • E xmark’s Quick-Attach design allows for installation and (116-3000) all Pioneer S-Series except removal For in under a minute, easilymodels switching from60". bagging (116-3001) For all Pioneer S-Series models. to side-discharge without tools.

3-bagger option (LZUV3B) For all full-size 60" & 72" Lazer Z models except diesel with s/n 790,000 & above.

(UV60 and UV6672) For all full-size 60" & 72" Lazer Z Diesel models.

(LZUV3B) Lazer Z 60"

Lazer Z 72"

UV60

UV6672

Lazer Z (Diesel) 60"

Lazer Z (Diesel) 72"

Overall 107.0" 110.0" 110.9" unit length with (271.8 cm) (279.4 cm) (281.6 cm) bagger Overall unit width with bagger Total bagging system weight

114

74.9" 87.4" 74.9" (190.3 cm) (221.9 cm) (190.3 cm) 449 lbs (204 kg)

406 lbs (184 kg)

261 lbs (118 kg)

115.4" (293 cm)

Collection Bags – 3 commercial-grade, cloth-mesh bags with reinforced bottoms.

Total Collection Capacity – 13.4 bushels (3 bags and hood).

Dump Mechanism – Manual dump from seat.

Blower Tube – 7.75"-diameter, fixed, abrasion-resistant polyethylene.

Impeller – 5-bladed, abrasion-resistant steel with vertical axis. 15.0" diameter.

Impeller Axis – Vertical.

Impeller Housing – 0.187" thick, abrasion-resistant steel.

Bearings – 1" (2.54 cm) sealed, non-greaseable bearings.

87.4" (221.9 cm) 268 lbs (122 kg)

115

ULTRAVAC SPECS ULTRAVAC X-SERIES®SPECS

• E xmark’s Quick-Attach design allows for installation and removal in under a minute, easily switching from bagging to side-discharge without tools.

• Compact design minimizes trailering space and lets you Lazerobstacles.

Z Lazer Z easily maneuver around 48" 52" • Precisely balanced to maintain exceptional stability.

Overall unit 102.0" 102.0" Low Cost, Low Maintenance length with (259.1 cm) (259.1 cm) ® runs bagger • With no auxiliary engine, the UltraVac quietly and dependably with minimal maintenance.

Overall unit 62.50" 67.75" • Unique width with impeller design creates high-velocity airflow and (158.8 cm) performance.

(172.1 cm) improved collection-system bagger • Large-diameter, smooth-discharge tube handles large 331 less lbs clogging.288 lbs Total bagging volumes of debris with system weight (150 kg) (130 kg) • Abrasion-resistant steel blower housing and impeller maximize blower life.

Productivity Collection Hopper – Commercial-grade steel and • Commercial-grade cloth mesh maximizes airflow and polyethylene. compaction—you’ll collect more debris per bushel Total debris Collection Capacity – 7 bushels. for increased capacity.

Dump Mechanism – Manual dump from seat.

• Lightweight bags with polyethylene bottoms mount Blower Tubefor –6.0"-diameter, fixed, abrasion-resistant, simply fast, easy emptying. molded polyethylene.

• Grass discharge from the QDS is accomplished in one Impeller – 5-bladed, 1/4" mm) handle. thick, abrasion-resistant simple motion of the(6.4 release steel with vertical axis. 13.0" diameter.

• Sealed hood reduce dust around engine and operator.

Impeller Axis – Vertical.

• Current production unit applications listed. Exmark Impeller Housing – 0.187" abrasion-resistant steel. offers an UltraVac to thick, fit virtually every zero turn rider Bearings – 1" Consult (2.54 cm)the sealed, non-greaseable model. on-line accessory lookbearings. up for older applications not listed here: www.exmark.com

ULTRAVAC X-SERIES SPECS

ULTRAVAC QUICK Disposal SYSTEM

(LZUVQD7) Flexibility ® -engineered collection system, designed • Eall xmark For full-size 48" and 52" Lazer Z models with s/n exclusively to fit Exmark zero-turn riders.

790,000 & above.

* Since bagging normally requires more horsepower than sidedischarge operation, depending on cutting conditions, higherhorsepower models may provide more efficient bagging capability.

• Debris-bypass impellerDisposal design reduces horsepower draw ULTRAVAC QUICK SYSTEM

and clogging.

LZUVQD11 For all full-size 60" & 72" Lazer Z models except diesel with s/n 790,000 & above.

UVD60 and UVD6672 For all full-size 60" & 72" Lazer Z Diesel models.

LZUVQD11 Lazer Z 60"

Lazer Z 72"

UVD60

UVD6672

Lazer Z (Diesel) 60"

Lazer Z (Diesel) 72"

Overall 106.5" 109.5" 109.4" 113.9" unit length with (270.5 cm) (286.2 cm) (278.0 cm) (289.4 cm) bagger Overall unit width with bagger Total bagging system weight

116

75.0" 87.25" 74.9" 87.4" (190.5 cm) (221.6 cm) (190.3 cm) (221.9 cm) 477 lbs (216 kg)

434 lbs (197 kg)

333 lbs (151 kg)

Collection Hopper – Commercial-grade steel and polyethylene hopper with rear-discharge door.

Commercial-grade, cloth-mesh door panel with molded lower wear panel.

Total Collection Capacity – 11 bushels.

Dump Mechanism – Single motion actuation from operator's seat.

Blower Tube – 7.75"-diameter, fixed, abrasion-resistant polyethylene.

Impeller – 5-bladed, abrasion-resistant steel; 15.0" diameter.

Impeller Axis – Vertical for more efficient discharge flow.

Impeller Housing – 0.187" thick, abrasion-resistant steel.

Bearings – 1" (2.54 cm) sealed, non-greaseable bearings.

278 lbs (126 kg)

117

ULTRAVAC SPECS

ULTRAVAC SPECS

2-bagger option For 42," 48" and 52" Quest models with serial #'s 919,999 & below.

QST 42"

QST 48"

QST 52"

Overall unit length with bagger

95.0" (241.3 cm)

95.0" (241.3 cm)

95.0" (241.3 cm)

Overall unit width with bagger

52.0" (132.1 cm)

58.0" (147.3 cm)

62.0" (157.5 cm)

125 lbs (276 kg)

125 lbs (276 kg)

125 lbs (276 kg)

Total bagging system weight

Total Collection Capacity – 6 bushels.

Dump Mechanism – Manual lift off.

Blower Tube – Fixed, abrasion resistant, molded polyethylene.

Impeller – None Impeller Axis – None Impeller Bearings – None Bearings – None

Lazer Z DS-Series ®

UltraVac Fit up

(Models with LZDS Prefix) Serial #'s 312,000,000 & above

Lazer Z D-Series ®

Lazer Z X-Series ®

(Models with LZZ or LZX Prefix) Serial #'s 790,000 & above Deck

Bag Style

Quick Dump

Completing Kit#

486

LZUV2B

LZUVQD7

109-9623

526

LZUV2B

LZUVQD7

109-9625

606

LZUV3B

LZUVQD11

726

LZUV3B

LZUVQD11

(Models with LZD Prefix) Serial #'s 920,000 to 999,999

Lazer Z XS ®

(Models with LZX Prefix) Serial #'s 790,000 to 919,999 Completing

Floor Pan

Deck

UV Model #

109-9627

605

UV60

109-9629

605

UVD60

109-1167

109-2203*

665

UV6672

109-1168

109-2203*

665

UVD6672

109-1168

109-2203*

725

UV6672

109-1169

109-2203*

725

UVD6672

109-1169

109-2203*

Lazer Z S-Series & Lazer Z E-Series

Kit#

Weight*

109-1167

109-2203*

®

(Models with LZS & LZE Prefix) Serial #'s 920,000 & above

Lazer Z Advantage Series

*Floor Pan Weight is only needed on Liquid-Cooled XS Units.

(Models with LZA Prefix) Serial #'s 850,000 to 919,999

118

Deck

Bag Style

Quick Dump

Completing Kit#

484

LZUV2B

LZUVQD7

116-2084

524

LZUV2B

LZUVQD7

116-2085

604

LZUV3B

LZUVQD11

116-2086

724

LZUV3B

LZUVQD11

116-2087

Lazer Z Advantage Series X ®

(Models with LZAS Prefix) Serial #'s 850,000 to 919,999

Lazer Z Advantage Series ®

(Models with LZAS Prefix) Serial #'s 790,000 to 849,999 Deck

Bag Style

Quick Dump

Completing Kit#

484

LZUV2B

LZUVQD7

109-9622

524

LZUV2B

LZUVQD7

109-9624

604

LZUV3B

LZUVQD11

109-9626

724

LZUV3B

LZUVQD11

109-9628

119

ULTRAVAC SPECS

®

ULTRAVAC BLOWER DRIVE BELTS

(Models with PNS Prefix) Serial #'s 920,000 & Above Deck

Bag Style

Quick Dump

Completing Kit#

443

116-3000 (UVE)

–

116-4885

483

116-3000 (UVE)

–

116-4887

523

116-3000 (UVE)

–

116-4889

Pioneer S-Series* (Models with PNS Prefix) Serial #'s 920,000 & Above Deck

Bag Style

Quick Dump

Completing Kit#

443

116-3001 (UVE)

–

116-4885

483

116-3001 (UVE)

–

116-4887

523

116-3001 (UVE)

–

116-4889

604

116-3001 (UVE)

–

116-6498

*The 116-3000 will fit all PNS deck sizes except 60". The 116-3001 will fit all PNS deck sizes including 60".

Quest SP ®

(Models with QSP Prefix) Serial #'s 850,000 to 919,999

120

Deck

Bag Style

Quick Dump

Completing Kit#

443

116-3000 (UVE)

–

116-4880

483

116-3000 (UVE)

–

116-4882

523

116-3000 (UVE)

–

116-4884

44" Drive Belt LCT, PHZ................................................ 1-653332 44" Drive Belt PNS......................................................... 103-0867 46" Series 5 Drive Belt LHP...........................................1-653438 48" Drive Belt LCT, LHP, Lazer Z 790,000 & above..... 1-653333 48" Drive Belt PNS......................................................... 116-4844 50" Series 5 Drive Belt LHP...........................................103-0866 52" Drive Belt LHP, LZ, LCT, LAS, FR............................1-653438 52" Drive Belt PNS......................................................... 1-653333 56" Series 5 Drive Belt LHP............................................109-1242 60" Drive Belt LZ, LAS, FR............................................103-0866 60" Series 5 Drive Belt LZ, LXS, PNS........................... 109-9249 66" Series 5 Drive Belt LZ, LXS..................................... 103-0867 72" Drive Belt LAS, FR................................................... 103-0867 72" Series 5 Drive Belt LZ, LXS......................................109-1244

ULTRAVAC SPECS

Pioneer S-Series*

Cloth Bag (LHP models).................................................116-3518 Cloth Bag (LCT models).................................................105-6980 Cloth Bag (Lazer Z models & PNS)................................116-0757 Cloth Bag (QST, PNE).....................................................116-1209 Cloth Bag (QT, QTE, QTS)..............................................110-6674 Bag and Frame Assembly (LHP models).......................116-3519 Bag and Frame Assembly (Lazer Z models & PNS)..... 116-0754 Bag and Frame Assembly (LCT)....................................109-1938 Bag and Frame Assembly (QST, PNE)...........................116-1244 Bag and Frame Assembly (QT, QTE, QTS)....................112-3994

121

MICRO-MULCH

Mulching capability of Exmark mowers will be greatly enhanced by following a few simple recommendations: 1. Proper ground speed is critical to efficient mulching.

2. Blade sharpness is also vital for proper mulching. Extra blades should be available for change as necessary.

3. If mowing during the heavy growing season or mowing tall, heavy grass, mowing or crosscutting the area a second time will greatly enhance the quality of cut and evenly distribute any clumps of mulched grass left from the first pass.

A

MULCHING HINTS

Solve clipping disposal problems, and recycle valuable nutrients.

Micro-Mulch accessory turns any side-discharge Exmark® into a mulching mower.

4. To achieve the optimum cut with 32", 36" and 48" fixed-deck units, use three blade spacers between the blade and spindle (on models S/N 102,000 and above) or four blade spacers (on models S/N 101,999 or below).

▼

B

The Micro-Mulch System is available on all Exmark walk-behind and riding mowers.

5. Due to the fact that mulching normally requires more horsepower than side-discharge operation, depending on cutting conditions, higher-horsepower models may provide more efficient mulching capability.

A Patented flow-control baffles improve the quality of cut, reduce grass and leaf blowout and lessen horsepower requirements when cutting in heavy grass.

B Mulching baffles enclose each blade in an individual cutting chamber.

Series 5 mulch kits include pre-installed hardware.

122

123

MULCH KIT CHART

MK26

26" Mulch Kit

MK322

32" Mulch Kit

MK343

34" Mulch Kit

MK362

36" Mulch Kit

MK363Q***

36" Mulch Kit

116-4247

36" Mulch Kit

MKNAV42

42" Mulch Kit

116-1085

42" Mulch Kit

116-4766

42" Mulch Kit

MK443Q

44" Mulch Kit

116-1108

44" Mulch Kit

MK465

46" Mulch Kit (Series 5)

MK483Q

48" Mulch Kit

MK486

48" Mulch Kit (Series 4 & 6)

MKNAV48

48" Mulch Kit

109-5980

48" Mulch Kit

MK505

50" Mulch Kit (Series 5)

116-4767

50" Mulch Kit (501)

116-6514

50" Mulch Kit (502)

• •

•

•

•

VT

NV

LZE LZDS LZS LZD LZX LZAS LXS LZZ LZA LXP LZ LAS LHP LCT

FR

QT PNS PNE QTE QSP QST QTS

Fits All Units

•

Fits All Units 115,000 & Above

•

Fits All Units

•

Fits All Units

•

Fits All Units

• •

•

•

• •

•

Fits All Units 600,000 & Above

•

•

Fits All Units

•

160,000 & Above

•

•

•

Fits All Units

•

Fits All Units

•

600,000 & Above

• • •

•

•

52" Mulch Kit

MK565

56" Mulch Kit (Series 5)

MK603Q

60" Mulch Kit

MK605

60" Mulch Kit (Series 5)

•

130,000 to 259,999 440,000, to 599,999 320,000 & Above

•

260,000 & Above***

•

•

Fits All Units

• •

600,000 & Above

•

130,000 to 319,999

•

130,000 to 189,999

•

600,000 to 789,999

•

600,000 & Above

•

190,000 thru 599,999** 190,000 thru 599,999; 670,000 & Above***

•

60" Mulch Kit (Series 4 & 6)

•

320,000 & Above

• 66" Mulch Kit (Series 5)

MK725

72" Mulch Kit (Series 5)

• • •

•

• •

72" Mulch Kit (Series 4 & 6)

Series 5 = Series 5 Deck Series 4 = UltraCut Series 4 Deck (Blade bolt diameter changed at s/n 540,000)

(s/n 540,000 and higher use 15/16" diameter, red colored blade)

124

Fits All Units 600,000 & Above

• •

DECK SERIES GUIDE Series 6 = UltraCut™ Series 6 Deck

•

600,000 & Above

• MK726***

Fits All Units 600,000 & Above

•

MK665

Fits all units 130,000 to 319,999

•

•

MK606***

Fits all units Fits All Units***

•

109-5982

Fits All Units

•

• 52" Mulch Kit (Series 4 & 6)

920,000 & Above Fits All Units

•

52" Mulch Kit

MK526***

Fits All Units

•

•

Serial Number Range 102,000 & Above

• MK523Q***

PH

ACCESSORIES & ATTACHMENTS

Part Number Description

TTS MG TTHP FMD Metro VH MHP TTX

•

All Units thru 599,999*** All Units thru 599,999; 790,000 & Above*** Fits All Units

NOTE: *** If you have a machine with s/n below 540,000, your mulch kit will require a blade with 5/8" arbor hole not provided in standard kit.

125

RIDER PRODUCTIVITY CHART

MPH

36" Width 100% 80%

42" Width 100% 80%

44" Width 100% 80%

48" Width 100% 80%

1.5

0.55

0.44

0.64

2.0

0.73

0.58

0.85

50" Width 100% 80%

52" Width 100% 80%

0.51

0.67

0.53

0.73

0.68

0.89

0.61

0.97

0.58

0.76

0.60

0.79

0.63

0.91

0.73

1.09

0.88

0.78

1.01

0.81

1.05

0.84

1.21

0.97

1.45

1.16

72" Width 100% 80%

1.45

2.5

0.91

0.73

1.06

0.85

1.11

0.89

1.21

0.97

1.26

1.01

1.31

1.05

1.52

1.21

1.83

3.0

1.09

0.87

1.27

1.02

1.33

1.06

1.45

1.16

1.52

1.21

1.58

1.26

1.82

1.45

2.19

1.74

3.5

1.27

1.02

1.48

1.19

1.56

1.24

1.70

1.36

1.77

1.41

1.84

1.47

2.12

1.70

2.54

2.04

4.0

1.45

1.16

1.70

1.35

1.78

1.42

1.94

1.55

2.02

1.62

2.10

1.68

2.42

1.94

2.90

2.33

5.0

1.82

1.45

2.12

1.69

2.22

1.77

2.42

1.94

2.53

2.02

2.63

2.10

3.03

2.42

3.64

2.90

6.0

2.18

1.74

2.55

2.03

2.67

2.13

2.91

2.33

3.03

2.42

3.15

2.52

3.64

2.91

4.37

3.49

7.0

2.55

2.03

2.97

2.37

3.54

2.83

8.0

2.91

2.32

3.11

2.48

3.39

2.72

3.68

2.94

4.24

3.40

5.05

4.08

3.56

2.84

3.88

3.10

4.20

3.36

4.84

3.88

5.80

4.66

8.5

4.12

3.29

4.46

3.56

5.15

4.11

6.18

4.94 5.23

9.0

4.36

3.48

4.73

3.77

5.46

4.35

6.53

9.5

4.61

3.68

4.99

3.98

5.76

4.59

6.90

5.52

10.0

4.85

3.87

5.25

4.19

6.06

5.00

7.27

6.00

11.0

6.66

5.33

8.02

6.42

12.0

7.27

5.81

8.73

6.97

** Two productivity ratings are shown: one at 100% and one at 80% efficiency. Many manufacturers use 100% efficiency ratings for sales purposes. Exmark® Mfg. believes an 80% efficiency rating is more representative of actual mowing conditions as it allows for turns and overlapping.

126

60" Width 100% 80%

RIDER PRODUCTIVITY CHART

Efficiency at 100% and 80%

Formulas for calculating acres per hour: 100% efficiency MPH x width of cut ÷ 99 = acres per hour 80% efficiency MPH x width of cut ÷ 124 = acres per hour

127

ENGINE SPECIFICATIONS

Displacement Engine cu. in. (cc) RPM

Engine Model

Spec. No.

Cyl.

Crank-Shaft

Cooling

Pressure Lube /Oil Filter

Oil Capacity Quart (liter)

Starting

recoil

ECX

Honda速

9.9 (163)

3,300 GXV160

160UH2 A1TT

1

vert

air

no/no

.7 (.7)

ECX (BBC)

Honda

9.9 (163)

3,300 GXV160

160UH2 TBE

1

vert

air

no/no

.7 (.7)

recoil

ECS ECX

Kawasaki速

10.9 (179)

3,300

FJ180V

BM11-M

1

vert

air

yes/no

.7 (.7)

recoil

Kawasaki

10.9 (179)

3,300

FJ180V

BM17-M

1

vert

air

yes/yes

.7 (.7)

recoil

ECX (BBC)

Kawasaki

10.9 (179)

3,300

FJ180V

BM12-M

1

vert

air

yes/yes

.7 (.7)

recoil

M26, ARS

recoil

Kawasaki

10.9 (179)

3,600

FJ180V

BM09-M

1

vert

air

yes/yes

.7 (.7)

SD

Honda

16.0 (270)

3,600

GX270

UTQA2 HC

1

vert

air

yes/yes

1.16 (1.1)

recoil

SG

Honda

12.0 (196)

3,600

GX200

UT QXCP

1

vert

air

yes/yes

.63 (.60)

recoil

SG MG, VH, TTS TTS

Honda

24 (389)

3,600

GX390

UT2 QXCP

1

horz

air

yes/yes

1.16 (1.1)

recoil

Kawasaki

36.8 (603)

3,600

FS481V

S06-R

2

vert

air

yes/yes

2.1 (2.0)

recoil

Kawasaki

36.8 (603)

3,600

FS541V

S23-R

2

vert

air

yes/yes

2.1 (2.0)

recoil

SAR

Kawasaki

36.8 (603)

3,600

FS481V

S25-R

2

vert

air

yes/yes

2.1 (2.0)

electric

VT

Kawasaki

36.8 (603)

3,600

FS541V

S06-R

2

vert

air

yes/yes

2.1 (2.0)

electric

NV

Kohler速

38.0 (624)

3,600

CH640

PS-CH640-3080

2

horz

air

yes/yes

2.0 (1.9)

electric

TTX

Kohler

38.0 (624)

3,600

CV640

PS-CV640-3025

2

vert

air

yes/yes

2.0 (1.9)

electric

TTS

Kawasaki

36.8 (603)

3,600

FS600V

S15-R

2

vert

air

yes/yes

2.1 (2.0)

electric

LZE, PNS

Kawasaki

36.8 (603)

3,750

FX600V

S13-R

2

vert

air

yes/yes

2.1 (2.0)

electric

Kohler

42.4 (694)

3,600

ECV650 PS-ECV650-3011

2

vert

air

yes/yes

2.0 (1.9)

electric electric

TTX PNS

Kawasaki

44.3 (726)

3,750

FX651V

S10-R

2

vert

air

yes/yes

2.2 (2.1)

VT

Kawasaki

44.3 (726)

3,600

FS651V

S12-R

2

vert

air

yes/yes

2.2 (2.1)

electric

LZS

Kawasaki

44.3 (726)

3,750

FX651V

S07-R

2

vert

air

yes/yes

2.2 (2.1)

electric

PNE

Kawasaki

44.3 (726)

3,600

FR651V

S13-R

2

vert

air

yes/yes

2.2 (2.1)

electric

QTE

Kawasaki

44.3 (726)

3,300

FR651V

S06-R

2

vert

air

yes/yes

2.2 (2.1)

electric

LZS, LZX

Kohler

41.1 (674)

3,750

CV680

PS-CV680-3039

2

vert

air

yes/yes

2.0 (1.9)

electric

PNS

Kohler

41.1 (674)

3,750

CV680

PS-CV680-3046

2

vert

air

yes/yes

2.0 (1.9)

electric

TTX

Kawasaki

44.3 (726)

3,600

FX691V

S13-R

2

vert

air

yes/yes

2.2 (2.1)

electric

LZS

Kawasaki

44.3 (726)

3,750

FX691V

S12-R

2

vert

air

yes/yes

2.2 (2.1)

electric

VT

Kawasaki

44.3 (726)

3,600

FS691V

S12-R

2

vert

air

yes/yes

2.2 (2.1)

electric

PNE

Kawasaki

44.3 (726)

3,600

FR691V

S13-R

2

vert

air

yes/yes

2.2 (2.1)

electric

LZE

Kawasaki

44.3 (726)

3,750

FX691V

S17-R

2

vert

air

yes/yes

2.2 (2.1)

electric

QTE, QTS

Kawasaki

44.3 (726)

3,300

FR691V

S07-R

2

vert

air

yes/yes

2.2 (2.1)

electric

LZS

Kohler

44.0 (725)

3,750

ECV730 PS-ECV730-3011

2

vert

air

yes/yes

2.0 (1.9)

electric

VT LZE, LZS, LZX LZS, LZX

Kohler

44.0 (725)

3,600

ECV730 PS-ECV730-3012

2

vert

air

yes/yes

2.0 (1.9)

electric

Kohler

41.1 (674)

3,750

CV740

PS-CV740-3135

2

vert

air

yes/yes

2.0 (1.9)

electric

Kohler

41.1 (674)

3,750

CV740

PS-CV740-3122

2

vert

air

yes/yes

2.0 (1.9)

electric

NV

Kohler

44.0 (725)

3,600 ECH730 PS-ECH730-3018

2

horz

air

yes/yes

2.1 (2.0)

electric

NV

Kohler

44.0 (725)

3,600

CH740

PS-CH740-3182

2

horz

air

yes/yes

2.1 (2.0)

electric

PNS

Kohler

41.1 (674)

3,750

CV740

PS-CV740-3138

2

vert

air

yes/yes

2.0 (1.9)

electric

VT

Kohler

41.1 (674)

3,600

ECV740 PS-ECV740-3013

2

vert

air

yes/yes

2.0 (1.9)

electric

LZS, LZX

Kohler

45.6 (747)

3,750

ECV749 PS-ECV749-3014

2

vert

air

yes/yes

2.1 (2.0)

electric

LZX, LZS

Kawasaki

52.0 (852)

3,750

FX801V

S04-R

2

vert

air

yes/yes

1.8 (1.9)

electric

LZX

Kohler

61.0 (999)

3,750

CV940

PS-CV940-2010

2

vert

air

yes/yes

2.1 (2.0)

electric

LZX

Kohler

60.9 (999)

3,750

CV980

PS-CV980-2012

2

vert

air

yes/yes

2.1 (2.0)

electric

D902

D902-E3BEXMK-1

3

horz

liquid

yes/yes

3.9 (3.7)

electric

LZDS

128

Engine Mfg.

Kubota

速

54.8 (898)

3,850

ENGINE SPECIFICATIONS

Models Used On

129

HORSE POWER RATING SYSTEM

SAE 1995 • Gross hp test standard

2012

16KA

481KA

18KA

541KA

20KA

600KA

22KA

651KA

24KA

691KA

24KA

691KA

29KA

801KA

SAE 1349 • Net hp test standard

2012 Exmark Numbering Engine horsepower will be replaced with the engine manufacturer’s model number Benefits: • Immune to additional hp rating changes if they occur • Numbers while not exactly displacement are related • Model numbers increase in a logical manner (i.e. engines with higher hp’s have a larger model number)

130

Kawasaki 2011

Examples: • LZX34KA606

LZX940KA606

• LZX29KA606

LZX801KA606

• LZX29EKC606

LZX749EKC606

• LZX27KC606

LZX740KC606

Kohler 2011

2012

20KC

640KC

21EKC

650KC

23KC

680KC

25EKC

730EKC

27KC

740KC

29EKC

749EKC

34KC

940KC

38KC

980KC

MODEL NUMBRER CROSS REFERENCE CHART

SAE 1940 • Ratings standard for engine hp • Tested hp must be within 85% of the rated number • Hp can be reported as gross or net as long as the appropriate test standard is used for the measurement

Kubota 2011

2012

25KD

902KD

131

WARRANTY IN BRIEF*

Commercial

Consumer

Commercial Riders & Front Mount Decks Lazer Z DS-Series 2 Year Limited 2 Year Limited Navigator Warranty Exceptions Bags, Belts & Tires 90 Days 90 Days Battery 1 Year Prorated 1 Year Prorated Engine* 2 Years** 2 Years** 5 Year or 750 Hours 3 Year Limited Lazer Z X-Series Limited (one time P & Lazer Z S-Series D allowed) Vantage Warranty Exceptions 90 Days 90 Days Bags, Belts & Tires 1 Year Prorated 1 Year Prorated Battery 3 Year - Kawasaki 2 Year - Kawasaki Engine* 2 Year - Kohler** 2 Year - Kohler** 4 Year or 500 Hours 2 Year Limited Lazer Z E-Series Limited (one time P & D allowed) Warranty Exceptions 90 Days 90 Days Bags, Belts & Tires 1 Year Prorated 1 Year Prorated Battery 3 Year - Kawasaki 2 Year - Kawasaki Engine* 2 Year - Kohler 2 Year - Kohler 2 Year Limited 4 Year or 500 Hours Pioneer S-Series Limited Warranty Exceptions 90 Days 90 Days Bags, Belts & Tires 1 Year Prorated Battery 1 Year Prorated 3 Years Engine* 2 Years 1 Year Limited 4 Year or 500 Hours Pioneer E-Series Limited Warranty Exceptions 90 Days Bags, Belts & Tires 90 Days 1 Year Prorated Battery 1 Year Prorated 3 Years Engine* 2 Years 3 Year Limited 30 Day Limited Quest S-Series Quest E-Series Warranty Exceptions 90 Days 90 Days Bags, Belts & Tires 1 Year Prorated 1 Year Prorated Battery 3 Years 2 Years Engine*

Quest Accessories

Model Year

Serial Number Range

2012

312,000,000 & above

1999

190,000-219,999

2011

920,000-999,999

1998

150,000-189,999

2010

850,000-919,999

1997

130,000-149,000

2009

790,000-849,999

1996

115,000-129,999

2008

720,000-789,999

1995

102,000-114,999

2007

670,000-719,999

1994

90,000-101,999

2006

600,000-669,999

1993

80,000-89,999

2005

510,000-599,999

1992

70,000-79,999

2004

440,000-509,999

1991

60,000-69,999

2003

370,000-439,999

1990

50,000-59,999

2002

320,000-369,999

1989

40,000-49,999

2001

260,000-319,999

1988

30,000-39,999

2000

220,000-259,999

1987-Earlier

29,999 and Below

In an effort to better serve our dealers, the Customer Service Department extends its support hours during the cutting season.* Monday through Friday 6:00 a.m. to 6:00 p.m.

1 Year

(Hours are based on Central Time zone.)

Call our Customer Service Department:

1 Year Limited

Stump Grinder 200 & Stump Grinder 390

Accessories Accessories (except as noted below) Striping Roller & OCD01 (accessories)

Serial Number Range

2 Years

Walk-Behinds Commercial Walk-Behinds 2 Years (exclude 26" & 21") 26" & 21" Mowers 1 Year Turf management Products 20" Slicer Seeder, 21" Aerator, 24" Aerator, 30" Stand-On Aerator, 1 Year Limited 18" Turf Rake,

Model Year

6 TO 6 TECHNICAL SUPPORT PROGRAM

Unit Type

(402) 223-6375 or E-mail our Service Department at

1 Year Limited

1 Year Limited

90 Days

90 Days

30 Day Limited

1 Year Limited

service@exmark.com *Cutting season is April through September.

Miscellaneous Peerless 5-Speed Transmission Bags, Belts and Tires Battery Engine*

2 years (extended 21 months beyond manufacturer's warranty of 90 days) 90 Days 90 Days 1 Year Prorated Year Prorated Warranty is covered by engine manufacturer.

See warranty statements for complete details. *Please refer to the engine manufacturer's warranty statement that is included in the literature packet. We are not authorized to handle warranty adjustments on engines. This warranty only includes the cost of parts and labor. **Kohler powered EFI units offer a 3 Year commercial warranty.

132

133