Syntec Catalogue 2010 by mike mccorry

Audio Install Catalogue

INSTALL CATALOGUE THE HISTORY

• Commercial Audio & Public Address

• Tourguide and Information Systems

• Professional Audio - Film, Stage and Broadcast

• M.I. and Home Recording Equipment

• Conference and Interpretation

• Consumer Audio/Visual

• Multi Room Audio Distribution

For over 35 years Syntec International has been proud to be the Australian and New Zealand distributor for some of the most renowned and respected brands of audio equipment, catering for a wide range of applications. The Syntec International Audio Install Catalogue has been produced to assist installation contractors and system designers throughout Australia and New Zealand. Consequently we have included images, extended product data and performance specifications where appropriate. It is intended that this catalogue will be updated periodically. We hope that you find this catalogue a useful tool when looking for products best suited to your installation needs. Syntec International would like to sincerely thank our customers, and take this opportunity to welcome new and prospective clients. As always we will strive to continue to offer a high standard of service, and a quality product range at very competitive pricing.

Page 1

INSTALL CATALOGUE CONTENTS

1. LOUDSPEAKERS FLUSH MOUNT Apart ...................................................................................................................................................................................6 SUFACE MOUNT Apart .................................................................................................................................................................................13 K-Array..............................................................................................................................................................................21 INSTALLED SOUND REINFORCEMENT Apart .................................................................................................................................................................................24 K-Array..............................................................................................................................................................................25 SUBWOOFERS Apart .................................................................................................................................................................................30 K-Array..............................................................................................................................................................................32 MUSIC & PAGING HORNS Apart .................................................................................................................................................................................33

2. AMPS POWER AMPS Apart .................................................................................................................................................................................36 K-Array..............................................................................................................................................................................44 MIXING AMPS Apart .................................................................................................................................................................................45 MODULAR AMPS Apart .................................................................................................................................................................................51

Page 2

INSTALL CATALOGUE CONTENTS

3. ELECTRONICS MULTIZONE - PREAMPS EQ’s Apart .................................................................................................................................................................................56 MUSIC DEVICES Apart .................................................................................................................................................................................62 HHB ..................................................................................................................................................................................64 CONTROLLERS Apart .................................................................................................................................................................................70

4. MICROPHONES PAGING Apart .................................................................................................................................................................................72 INSTALLED Sennheiser ........................................................................................................................................................................73 WIRED Sennheiser ........................................................................................................................................................................75 WIRELESS Sennheiser ........................................................................................................................................................................76

5. CONFERENCING & COMMUNICATIONS WIRED SYSTEMS Apart .................................................................................................................................................................................83 Sennheiser ........................................................................................................................................................................85 WIRELESS SYSTEMS Sennheiser RF ..................................................................................................................................................................87 Sennheiser IR....................................................................................................................................................................93

Page 3

INSTALL CATALOGUE THE PARTNERS

For more than 60 years, Sennheiser has continued to produce top-quality products and tailor-made solutions in all areas of sound recording, transition and reproduction. Microphones and headphones of every kind, RF transmission equipment ranging from vocals microphones to complete systems for musicals,

conference and visitor guidance systems, products for the hearing impaired and headsets for aviation – Sennheiser products have become firmly established at the pinnacle of audio technology throughout the world.

Founded in 1976, HHB Communications is Europe’s leading supplier of professional audio technology, and a world leader in the development and production of digital recording products and recording media. As part of our commitment to world-class products we have

designed state of the art audio sources; Dual CD player/ recorders and additionally a DVD player designed to be reliable and robust enough to withstand the demands placed on them by commercial applications.

Designed and manufactured in Florence Italy, K-Array loudspeakers and amplifiers are new and innovative products for the Australian and New Zealand Pro Audio market. Created to provide compact, light, unobtrusive, intelligible and loud audio solutions; the K-Array range

is ideal for applications where an efficient architectural solution is required without compromise on audio quality. With a wide range of products available, K-Array has a system to suite the most complex of applications.

APart Europe offers a complete range of loudspeakers and electronics for the contractor market. It is their mission to offer unique, and above all, reliable products that meet the customer’s demands; all at competitive prices! A dedicated R&D team at their Headquarters,

along with ambitious engineers, design and develop products according to the remarks and demands given by their distribution partners, and additionally with the information they receive from their extended sales and marketing department.

Page 4

Loudspeakers

Syntec International Australia: Free Call 1800 648 628 | email: sales@syntec.com.au Syntec International New Zealand: Free Call 0800 100 755 | email: sales@syntec.co.nz

LOUDSPEAKERS FLUSH MOUNT

3” METAL MINI CM3T, CM3T-BL, CM3T-SLV • Halogen spot size, bright sound

• BL

• 3” full range speaker • 6 - 3 - 1.5 Watts 100 V • 20 Watts @ 16 Ohm • PAINTCMM (option: any RAL colour) • Dimensions: 105 (outside Ø), 82 (cutout Ø), 70 (d) mm

• SLV

4” METAL MINI • BL

CM4T, CM4T-BL, CM4T-SLV • Perfect match of size and sound • Surprising quality for a 4” • 6 - 3 - 1.5 Watts 100 V transformer • 30 Watts @ 16Ω • PAINTCMM (option: any RAL colour) • Dimensions: 135 (outside Ø), 105 (cutout Ø), 74 (d) mm

• SLV

CM6SF METAL CM6SF • Safety ﬁrst … : voice evacuation alarms • Compliant to the EN60849 regulation • Steel ﬁredome included • 6.5” dual cone woofer • 6 - 3 - 1.5 Watts 100 Volt transformer • PAINTCM (option:any RAL colour) • Dimensions: 217 (Outside Ø) , 205 (Cutout Ø), 148 (d) mm

Page 6

LOUDSPEAKERS FLUSH MOUNT

6.5” DUAL-CONE - ELEGANCE CM6E, CM6E-BL, CM6E-SLV • Start with elegance… • 6.5” dual cone speaker • 6 - 3 - 1.5 Watts 100 V transformer • PAINTCM (option : any RAL colour) • Dimensions : 205 (Outside Ø), 183(cutout Ø), 70 mm(depth)

5” DUAL-CONE - BUDGET SOLUTION CM5E • Probably the most affordable in the world • 5” dual cone speaker • 6 - 3 Watts 100 V transformer • Quick ﬁt via 2 spring clamps • PAINTCM (option : any RAL colour) • Dimensions : 178(outside Ø), 160(cutoutØ), 53 mm(depth)

Page 7

LOUDSPEAKERS FLUSH MOUNT

6.5” TWO-WAY - REFERENCE

CM608, CM608-BL, CM608-SLV • The everlasting contractor’s standard • 6.5” enforced PP woofer, 1” tweeter • 60 Watts program power @ 8Ω • PAINTCM (option:any RAL colour) • Dimensions: 205 (Outside Ø) , 183 (Cutout Ø), 80 (d) mm

• BL

CM6T • The contractor’s reference • 6.5” enforced PP woofer, 1” Tweeter • 60 Watts program power @ 16Ω • 6 - 3 - 1.5 Watts 100 Volt transformer • PAINTCM (option:any RAL colour) • Dimensions: 205 (Outside Ø) , 183 (Cutout Ø), 80 (d) mm

• SLV

CM20T, CM20T-BL, CM20T-SLV • Just that little extra …Power! • 6.5” enforced PP woofer, 1” tweeter • 60 Watts program power @ 16Ω • 20 - 10 - 5 - 2.5 Watts 100 Volt transformer • PAINTCM (option:any RAL colour) • Dimensions: 205 (Outside Ø) , 183 (Cutout Ø), 80 (d) mm

CMMB • The CMBB can be used as an on-wall or in-wall back-box for the APart build-in speakers CM6T, CM6E, CM20T & CM608 • The conical shape of the CMBB guarantees a perfect ﬁt into a concrete or brick wall or ceiling • PAINTCM (option:any ral colour) • Dimensions: 230 (Outside Ø) , 80 (h) mm

Page 8

LOUDSPEAKERS FLUSH MOUNT

8” TWO-WAY - PERFECTION CM1008 • Perfectly balanced full spectrum sound • 8” enforced PP woofer, 1” tweeter • 100 Watts program power @ 8Ω • PAINTCM (option:any RAL colour)

• BL

• Dimensions: 244 (Outside Ø) , 220 (Cutout Ø), 90 (d) mm

CMX20T, CMX20T-BL, CMX20T-SLV

• SLV

• When top quality does matter… • 8” enforced PP woofer, 1” tweeter • 100 Watts program power @ 16Ω • 20 - 10 - 5 - 2.5 Watts 100 Volt transformer • PAINTCM (option:any RAL colour) • Dimensions: 244 (Outside Ø) , 220 (Cutout Ø), 90 (d) mm

5” TWO WAY - SQUARE CMS508 • Compact, stylish and powerful… • 2 way : HiFi 5” enforced woofer, 1” tweeter • 50 Watts program power @ 8Ω • PAINTCM: (option) any RAL colour • Dim. (outside): 171(h) x 171(w) x 54(d)mm • Cutout: 145 mm x 145 mm

CMS15T • Small format to ﬁt discretely into any interior • 2 way : HiFi 5” enforced woofer, 1” tweeter • 50 Watts program power @ 16 Ohm • 15 - 10 - 5 - 2.5 W - 100 V transformer • PAINTCM option: any RAL colour • Dim. (outside): 171(h) x 171(w) x 61(d)mm • Cutout: 145 mm x 145 mm

Page 9

LOUDSPEAKERS FLUSH MOUNT

• Thanks to its sleek, ﬂat looks and ultrathin edge, this ceiling speaker can seamlessly be integrated into any interior.

6.5” TWO-WAY - SPEED RECORD CM6QFT • The new contractor’s reference • The patented Quick Fit System reduces install labor drastically • Fits most ceilings 12,5 - 29mm thick • 6.5” low-distortion paper cone woofer, 1” tweeter • 6-3-1.5 Watts 100 Volt transformer • 40 Watts program power @ 16 Ohm • Strong metal grille • PAINTCM (option: any RAL color) • Dimensions: 237 (Outside Ø) , 216 (Cutout Ø), 65 (d) mm

• The patented Quick Fit System allows easy installing Connect the cabling, place the speaker in the cutout and push the clamp releases. It’s as easy as that, a matter of seconds.

6.5” TWO-WAY - SQUARE CMS608 • Great shapes …, quality sound • 6.5” enforced woofer, 1” tweeter • 60 Watts program power @ 8Ω • PAINTCM (option:any RAL colour) • Dim. (outside): 201(h) x 201(w) x 75(d)mm • Cutout : 176 x 176mm CMS20T • Looks good..., sounds great ! • 6.5” enforced woofer, 1” tweeter • 60 Watts program power @ 16Ω • 20 - 10 - 5 - 2.5 Watts 100 Volt transformer • PAINTCM (option:any RAL colour) • Dim. (outside): 201(h) x 201(w) x 75(d)mm • Cutout : 176 x 176mm

4” RECTANGULAR CMR15T • Quality sound by a small and elegant design • 4” enforced woofer, 1” tweeter • 60 W program power @ 16Ω • 15 - 10 – 5 – 2.5 Watts 100 V transformer • PAINTCM option: any RAL colour • Dim. (outside): 220(h) x 147(w) x 60(d) mm • Cutout: 192(h) x 118(w) mm

Page 10

LOUDSPEAKERS FLUSH MOUNT

5” RECTANGULAR CMR608 • Quality sound in style ... • 5” enforced woofer, 1” tweeter • 60 Watts program power @ 8Ω • PAINTCM (option:any RAL colour) • Dim. (outside): 237(h) x 170(w) x 65(d)mm • Cutout : 210(h) x 143(w)mm

CMR5 • The essentials ..... • 5” dual cone woofer • 6 - 3 - 1.5 Watts 100 Volt transformer • PAINTCM (option:any RAL colour) • Dim. (outside): 237(h) x 170(w) x 65(d) • Cutout : 210(h) x 143(w)mm

CMR20T • When sound meets design ... • 5” enforced woofer, 1” tweeter • 60 Watts program power @ 16Ω • 20 - 10 - 5 - 2.5 Watts 100 Volt • PAINTCM (option:any RAL colour) • Dim. (outside): 237(h) x 170(w) x 65(d) • Cutout : 210(h) x 143(w)mm

CMRBB • With the CMRBB on-wall back-box you can change a 5” CMRbuild-in type into a cabinet speaker. • PAINTCAB6 (option:any ral colour) • Dim. 235(h) x 167(w) x 85(d)

CMRBBI • CMRBBI is used to build-in rectangular APart 5” CMRLoudspeakers into concrete or brick walls. • The build-in box has special grooves to guarantee an optimal grip into concrete and cement. • Dim. 213(h) x 146(w) x 84(d)

Page 11

LOUDSPEAKERS FLUSH MOUNT

CMRQ108 - EXPERIENCE CMRQ108

• Enjoy the best musical experience a wall speaker can deliver • Top quality 6.5” woofer with Kevlar Dupont® cone • Pivotable silk dome tweeter, very low distortion • Built-in crossover with HF tone control • 120-Watts program power • 8 ohm, selectable to 12 ohm • PAINTCM (option: any RAL colour) • Dim. (outside): 296 (h) x 196 (w) mm • Cutout: 272(h) x 172(w) x 78(d) mm

CMRQ108C - CENTER CMRQ108C

• Hi-end center speaker for home theatre use • Attractive design for other use as well • Precisely engineered for clear voice reproduction • Dual 5.3” woofers with Kevlar Dupont® cone • Silk dome tweeter guarantees crystal clear sound • Built-in crossover with HF tone control • 100 Watts program power @ 8 ohm • PAINTCM (option: any RAL colour) • Dimensions (outside): 176 (h) x 346 (w) mm • Cutout: 153 (h) x 323 (w) x 69 (d) mm

Page 12

LOUDSPEAKERS SURFACE MOUNT

SDQ5P - ACTIVE • Dynamic music and detailed voice clarity • 2 x 30 Watts RMS power for high level outputs • Balanced inputs allow long input-signal cables • Bass & treble control • RCA and mini-jack stereo inputs (MP3 players) • Low distortion, high efﬁcient 5.25” woofer and 1” tweeter • Magneticaly shielded components • Brackets and 3 metres long power cord included • Dimensions (L = R): 243 (h) x 180 (w) x 148 (d) mm

TEXT • text

MODEL

Page 13

LOUDSPEAKERS SURFACE MOUNT

SDQ3 - MINI • Small & Cute, but yet a great sound • 3” woofer, 1” tweeter • 40 Watts program power @ 16Ω • 6 - 3 - 1,5 Watts 100V transformer • PAINTCAB6 (option:can be painted in any ral colour)

SDQ3T-BL

• Dimensions: 152 (h) x 105 (w) x 110 (d) mm

SDQ3T-W

SDQ3 & SDQ5 SERIES - SAFCAB6

• available as an option

SDQ5 - SERIES

SDQ5-bl SDQ5t-bl

SDQ5t-BL, SDQ5t-w, SDQ5t-slv • Reliable & competitive install solution • 5.25” woofer, 1” tweeter • 80 Watts program power @ 16Ω • 30 - 15 - 6 - 3 Watts 100V transformer • PAINTCAB6 (option: any ral colour) • Dimensions: 245 (h) x 180 (w) x 154 (d) mm SDQ5-BL, SDQ5-w • Powerfull HiFi sound • The winner takes it all! • 5.25” woofer, 1” tweeter • 80 Watts program power @ 8Ω • PAINTCAB6

SDQ5-w

• Dimensions: 245 (h) x 180 (w) x 154 (d) mm

SDQ5t-w

SDQ5t-SLV

Page 14

SDQ3T-SLV

LOUDSPEAKERS SURFACE MOUNT

SDQ8 - SERIES SDQ8-BL, SDQ8-W • Power at a price easy to live with! • 8” woofer, 1” tweeter • 160 Watts program power @ 8Ω • PAINTCAB8 (option: any ral colour) • Dimensions: 381 (h) x 283 (w) x 243 (d) mm SDQ8T-BL, SDQ8T-W • A powerfull contractor solution • 8” woofer, 1” tweeter • 160 Watts program power @ 16Ω • 60 – 30 – 15 - 6 Watts 100V transformer • PAINTCAB8 (option: any ral colour) • Dimensions: 381 (h) x 283 (w) x 243 (d) mm

SDQ8-BL SDQ8T-BL

MODEL SUB • text

Page 15

LOUDSPEAKERS SURFACE MOUNT

MASK4T-BL

MASK4 - INNOVATION

MASK4-BL

MASKT4-BL, MASKT4-W, MASKT4-SLV • Cute as a baby • 4.2” HD woofer, 1” tweeter • 70 Watts program power @ 16 Ohm • 20 - 10 - 5 - 2.5 Watts 100V transformer • Protection Guard™ Technology • PAINTCAB6 (option: any RAL colour) • Dimensions : 223 (h) x 129 (w) x 130 (d) mm

MASK4T-W MASK4-W

MASK4-BL, MASK4-W, MASK4-SLV • small and elegant • ﬁts into every décor and interior style • 4.2” HD woofer, 1” tweeter • 70 Watts program power @ 8 Ohm • Protection Guard™ Technology • PAINTCAB6 (option: any RAL colour) • Dimensions : 223 (h) x 129 (w) x 130 (d) mm

MASK4T-SLV MASK4-SLV

MASK6 - REFERENCE

MASK6-BL MASK6T-BL

MASK6-BL, MASK6-W • The new reference … • 6.5” HD Woofer, 1” tweeter • 200 Watts program power @ 8Ω • Protectionguard™ technology • PAINTCAB6 (option:can be painted in any RAL colour) • Dimensions: 315 (h) x 175 (w) x 195 (d) mm MASK6T-BL, MASK6T-W • Quality & design 100V / 16Ω solution • 6.5” HD Woofer, 1” tweeter • 200 Watts program power @ 16Ω • 60 - 30 - 15 - 6 Watts 100V transformer • Protectionguard™ technology

MASK6-W

• PAINTCAB6 (option:can be painted in any RAL colour)

MASK6T-W

• Dimensions: 315 (h) x 175 (w) x 195 (d) mm

Page 16

LOUDSPEAKERS SURFACE MOUNT

MASKLW - MASKLBL - L-BRACKET MASKL-W MASKl-BL (a set contains 1 pair)

MASKVW - MASKVBL - V-BRACKET MASKV-W MASKV-BL

MASKWW - MASKWBL - W-BRACKET MASKW-W MASKW-BL

MASK4 & MASK6 SERIES - INTELLI-MOUNT INTELLI-MOUNT (Included in MASK4 & MASK6 series)

MASK4 & MASK6 SERIES - SAFETY SAFCAB6 (Included in MASK4 & MASK6 series)

Page 17

LOUDSPEAKERS SURFACE MOUNT

MASK8 - PRECISION MASK8-BL, MASK8-W • Vocal perfection and dynamic music • Protection-Guard™ technology • MDF Wooden cabinet • 8”HD woofer, 1” tweeter • 300 Watts program power @ 8 Ohm • PAINTCAB8 (option: any RAL colour) • Dimensions : 411(h) x 250 (w) x 250 (d) mm MASK8F-BL, MASK8F-W • Full range speaker for stand-alone use without subwoofer • HiFi quality at amazing high levels • Protection-Guard™ technology • 8”HD woofer, 1” tweeter • 300 Watts program power @ 8 Ohm • PAINTCAB8 (option: any RAL colour) • Dimensions : 411(h) x 250 (w) x 250 (d) mm • PAINTCAB8 (option: any RAL colour) • Dimensions : 411(h) x 250 (w) x 250 (d) mm

MASK8-BL MASK8F-BL

Mounting bracket included with all MASK8 models

90° rotatable 100°H x 70°V horn for vertical installation

MASK8-w MASK8F-w

Page 18

LOUDSPEAKERS SURFACE MOUNT

COLW - COLUMNS COLW41 • 4 x 3.3” full range woofer + 1 x 1” tweeter • 40 - 30 - 15 Watts 100 V transformer • 60 Watts music power @ 16 Ohm • PAINTCOL (option: any RAL colour) • Dimensions : 555 (h) x 100 (w) x 83 (d) COLW81 • 8 x 3.3” full range woofer + 1 x 1” tweeter • 80 - 40 - 30 Watts 100 V transformer • 120 Watts music power @ 8 Ohm • PAINTCOL (option: any RAL colour) • Dimensions : 974 (h) x 100 (w) x 83 (d) COLW101 • 10 x 3.3” full range woofer + 1 x 1” tweeter • 100 - 60 - 40 Watts 100 V transformer • 140 Watts music power @ 8 Ohm • PAINTCOL (option: any RAL colour) • Dimensions : 1010 (h) x 100 (w) x 83 (d)

DID YOU KNOW • Tall columns have a much wider and controlled dispersion than shorter models. • Our larger models also cover a wider area than conventional speakers, so less speaker cabinets are needed to achieve the same sound pressure in a certain area.

COLWBRA

bracket for COLW range

Standard bracket included

Page 19

LOUDSPEAKERS SURFACE MOUNT

COLS - COLUMNS COLS41 • 4 x 2” full range woofer + 1 x 1” tweeter • 20 - 10 - 5 Watts 100 V transformer • 30 Watts music power @ 8 Ohm • PAINTCOL (option: any RAL colour) • Dimensions : 400 (h) x 66 (w) x 66 (d) COLS81 • 8 x 2” full range woofer + 1 x 1” tweeter • 30 - 15 - 6 Watts 100 V transformer • 40 Watts music power @ 16 Ohm • PAINTCOL (option: any RAL colour) • Dimensions : 613 (h) x 66 (w) x 66 (d) COLS101 • 10 x 2” full range woofer + 1 x 1” tweeter • 40 - 20 - 10 Watts 100 V transformer • 60 Watts music power @ 8 Ohm • PAINTCOL (option: any RAL colour) • Dimensions : 723 (h) x 66 (w) x 66 (d) COLS141 • 14 x 2” full range woofer + 1 x 1” tweeter • 60 - 30 - 20 Watts 100 V transformer • 80 Watts music power @ 8 Ohm • PAINTCOL (option: any RAL colour) • Dimensions : 940 (h) x 66 (w) x 66 (d)

COLSBRA

bracket for COLS range

Standard bracket included

Page 20

LOUDSPEAKERS SURFACE MOUNT

VYPER KV50

- Ultra flat 3D line array element

FEATURES • Vertical, horizontal and 3D line-array possibility • Unique performance-to-size ratio • Multiple 1” long excursion full-range cone drivers • Smooth frequency response • Electronically protected • High dynamic range capability • Integrated connection hardware • Top quality components for outstanding performances • Essential shape for invisible arrays • Available in Black or White • High impedance for multiple easy parallel wiring

APPLICATIONS • Front and under-balcony ﬁll • Portable and installed AV systems • Stage and AV-Studio monitoring

K-array Vyper KV50 loudspeaker is a very compact ultra flat loudspeaker. In contrast to conventional low power 70-volt transformer based systems, the KV50 connects directly to the amplifier and is capable of producing high sound pressure levels while dramatically reducing distortion and very easing installation requirements. It employs sophisticated 1” transducers capable to reproduce with a very low distortion a really wide range of frequencies with a considerable value of sensitivity. A lot of accessories are available to install in the easiest and fastest way any Vyper device both in temporary or in permanent installations. A full choice of presets is provided for KA amplifiers to optimize Vyper performances in any application.

TECH BRIEF ACOUSTICS Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

150W1 300W2 16 Ohm - 64Ohm Selectable 240Hz - 19KHz +/- 3dB (preset relating)3 200Hz - 19KHz +/- 3dB (preset relating)4 86 dB (low-mid)5 108 dB continuous - 114 dB peak6

COVERAGE Horizontal Vertical

110º (single unit) - array dependent 10º (single unit) - array dependent

CROSS OVER

Type Frequency

TRANSDUCERS Full range

POWER AUDIO INPUT Connectors

2 x screw 2 pins

SELECTION SWITHCERS Impedance

16 Ohm - 64 Ohm

RECOMMENDED AMPLIFIERS Single ended mode KA10, KA15 and KA40 to drive till 16 units of KV50 each channel Bridge mode KA10 to drive one unit each amplifier PHYSICAL Measures Weight

50 x 3.6 x 2 cm 0.7Kg

External cross over required 150 Hz 24dB/oct minimum suggested 8 x 1” Neodymium magnet 0.75”VC long excursion cone drivers

NOTES FOR DATA 1. Power handling is measured following AES standard conditions: transducers driven continuously for two hours with a band-limited noise signal having 6 dB of crest factor. 2. Max power is the maximum RMS applicable power for a musical signal, the referement signal is the one proposed by EIAJ standard. 3. Recommended maximum operating frequency range. Response depends on loading conditions and room acoustics. 4. Free field measured with 1/3 octave frequency resolution at 2 mt. 5. Measured @4 mt then scaled @1 mt. 6. Measured with audio source @1 mt. 7. This is the frequency in which the transducers produce the same sound pressure level (measured@2 mt). 8. Amplifier wattage rating is based on the maximum unclipped burst sine wave RMS voltage that the amplifier will produce into the the nominal load impedance.

Page 21

LOUDSPEAKERS SURFACE MOUNT

NEW

- New

FEATURES • All new

APPLICATIONS • All new

New Text coming

TECH BRIEF ACOUSTICS Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

150W1 300W2 16 Ohm - 64Ohm Selectable 240Hz - 19KHz +/- 3dB (preset relating)3 200Hz - 19KHz +/- 3dB (preset relating)4 86 dB (low-mid)5 108 dB continuous - 114 dB peak6

COVERAGE Horizontal Vertical

110º (single unit) - array dependent 10º (single unit) - array dependent

CROSS OVER

Type Frequency

TRANSDUCERS Full range

POWER AUDIO INPUT Connectors

2 x screw 2 pins

SELECTION SWITHCERS Impedance

16 Ohm - 64 Ohm

RECOMMENDED AMPLIFIERS Single ended mode KA10, KA15 and KA40 to drive till 16 units of KV50 each channel Bridge mode KA10 to drive one unit each amplifier PHYSICAL Measures Weight

External cross over required 150 Hz 24dB/oct minimum suggested 8 x 1” Neodymium magnet 0.75”VC long excursion cone drivers

Page 22

50 x 3.6 x 2 cm 0.7Kg

LOUDSPEAKERS SURFACE MOUNT

KOBRA SYSTEMS

KK50

FEATURES • Vertical, horizontal and 3D-array possibility • Unique performance-to-size ratio • Multiple 2” long excursion full-range drivers • Wide horizontal coverage • Smooth frequency response • Electronically protected • High dynamic range capability • Top quality components for outstanding performances • Essential frame for invisible arrays APPLICATIONS

• Available in Black or White

• Theatres main PA arrays • Front and under-balcony ﬁll • Portable and installed AV systems • Stage and AV-Studios monitoring

TECH BRIEF Acoustics

Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

Coverage Horizontal Vertical

Transducers Full-range

Power Audio Input Connectors Wiring

Selection Switches Circuit Impedance

Recommended Amplifiers (64 Ohm setting) Single ended mode Bridge mode

KK50 150 W1 300W2 64 Ohm -16 Ohm select 200Hz - 19KHz +/- 3dB3 150 Hz - 20 KHz +/- 3dB4 92 dB5 114 dB continuous 100º (single unit) 10º (single unit) 8 x 2” neodymium 0.75”VC Two x 4 pins Speakom CH1 (1+/1-) - CH2(2+/2-) CH1/CH2 wiring possibility 64 Ohm - 16 Ohm select

KA, KA15, KA40 to drive till 16 units each channel KA10, KA15 to drive till 8 units aeach amplifier

Recommended Amplifiers (32 Ohm setting) Single ended mode Bridge mode

Recommended Amplifiers (16 Ohm setting) Single ended mode Bridge mode

KA0, KA15 to divr till 16 units channel

Recommended Amplifiers (8 Ohm setting) Single ended mode

Recommended Amplifiers (4 Ohm setting) Single ended mode

Physical Measures Weight

56 x 70 x 500 mm 2 Kg

Page 23

LOUDSPEAKERS SURFACE MOUNT

TORNADO KT20

- 2” point source compact speaker

FEATURES • Unique performance-to-size ratio • Single 2” long excursion full range driver • Wide-range frequency response • High speech intelligibility and high dynamic range for music applications • Integrated Speakon or RJ45 connector for mobile or installed application • Full Aluminum ultra strong frame • Available in Black or Aluminum • Integrated connection points for accessories • Only 320g of weight APPLICATIONS • Background music systems in restaurants and clubs • High-quality distributed systems for paging and music • Exhibit audio for museum displays • Space-sensitive ﬁll for theatres

K-array Tornado KT20 miniature sound source is a passive loudspeaker designed for high-quality distributed systems. Housed in a compact aluminum enclosure, the KT20 is especially suitable for installations involving space limitations and visibility concerns, such as fill and spot coverage, and hidden locations like chancel steps in a house of worship. Its flexible and easy-to-configure mounting options, as well as its ability to effortlessly reproduce both speech and music, make it an excellent choice for fixed applications, theatrical presentations (stage lip frontfill), and small portable systems for corporate AV solutions.The KT20 proprietary 2” cone transducer delivers an impressive maximum peak SPL of 107dB, and has a wide operating frequency range from 150 Hz to 18 kHz with very low distortion.

TECH BRIEF TRANSDUCERS Full range

2” Neodymium cone driver with 0.75” voice coil

POWER INPUT Connectors

Speakon (1+/1-) or RJ45 (1+/2-) Input

ACOUSTICS Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

10W1 30W2 32 OHM (8 OHM VERSION AVAILABLE) 300Hz - 18KHz +/- 3dB (preset relating)3 200Hz - 18KHz +/- 3dB (preset relating)4 87 dB (low-mid)5 101 dB continuous - 107 dB peak6

COVERAGE Horizontal Vertical

90º 90º

RECOMMENDED AMPLIFIERS Single ended (32Ohm) KA10 and KA10-10 to dsrive till 8 units of KT20 each channel KU01 and KU03 to drive till 8 units of KT20 each channel Single ended (8Ohm) KU01 to drive till 2 units of KT20 each channel

CROSS OVER Type Frequency

External cross over required 150 Hz 24dB/oct minimum suggested

PHYSICAL Measures Weight

6.4cm dia x 9.3cm deep 0.35 Kg

Page 24

LOUDSPEAKERS SURFACE MOUNT

TORNADO KT20C

- 2” point source compact speaker

FEATURES • New APPLICATIONS • New

New text.

TECH BRIEF TRANSDUCERS Full range

2” Neodymium cone driver with 0.75” voice coil

POWER INPUT Connectors

Speakon (1+/1-) or RJ45 (1+/2-) Input

ACOUSTICS Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

10W1 30W2 32 OHM (8 OHM VERSION AVAILABLE) 300Hz - 18KHz +/- 3dB (preset relating)3 200Hz - 18KHz +/- 3dB (preset relating)4 87 dB (low-mid)5 101 dB continuous - 107 dB peak6

COVERAGE Horizontal Vertical

90º 90º

CROSS OVER Type Frequency

External cross over required 150 Hz 24dB/oct minimum suggested

PHYSICAL Measures Weight

Page 25

6.4cm dia x 9.3cm deep 0.35 Kg

LOUDSPEAKERS SURFACE MOUNT

TORNADO KT20MA

- 2” point source compact speaker

FEATURES • New APPLICATIONS • New

New text.

TECH BRIEF TRANSDUCERS Full range

2” Neodymium cone driver with 0.75” voice coil

POWER INPUT Connectors

Speakon (1+/1-) or RJ45 (1+/2-) Input

ACOUSTICS Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

10W1 30W2 32 OHM (8 OHM VERSION AVAILABLE) 300Hz - 18KHz +/- 3dB (preset relating)3 200Hz - 18KHz +/- 3dB (preset relating)4 87 dB (low-mid)5 101 dB continuous - 107 dB peak6

COVERAGE Horizontal Vertical

90º 90º

CROSS OVER Type Frequency

External cross over required 150 Hz 24dB/oct minimum suggested

PHYSICAL Measures Weight

Page 26

6.4cm dia x 9.3cm deep 0.35 Kg

LOUDSPEAKERS SURFACE MOUNT

TORNADO KT20MA

- 2” point source compact speaker

FEATURES • New APPLICATIONS • New

New text.

TECH BRIEF TRANSDUCERS Full range

2” Neodymium cone driver with 0.75” voice coil

POWER INPUT Connectors

Speakon (1+/1-) or RJ45 (1+/2-) Input

ACOUSTICS Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

10W1 30W2 32 OHM (8 OHM VERSION AVAILABLE) 300Hz - 18KHz +/- 3dB (preset relating)3 200Hz - 18KHz +/- 3dB (preset relating)4 87 dB (low-mid)5 101 dB continuous - 107 dB peak6

COVERAGE Horizontal Vertical

90º 90º

CROSS OVER Type Frequency

External cross over required 150 Hz 24dB/oct minimum suggested

PHYSICAL Measures Weight

Page 27

6.4cm dia x 9.3cm deep 0.35 Kg

LOUDSPEAKERS INSTALLED SOUND REINFORCEMENT

ROCK - ESPECIALLY ROCK608 • Inconspicuous integration, amazing sound • 6.5” woofer, 1” tweeter • 60 Watts program power @ 8Ω • PAINTCAB8 (option: any RAL colour) • Dimensions: 260 (h) x 200 (w) x 280 (d) mm

SPH16 - SMOOTH SPH16 • Imperceptible design, great 2-way sound quality • 5.25” woofer & 1” tweeter • 16 - 8 - 4 Watts 100 Volt transformer • 3 metres connection cable with metal safety wire • PAINTCAB6 (option: any ral colour) • Dimensions: 180 mm outside Ø

SPH20 - DISPERSION SPH20 • Loud and wide sound dispersion … • 8” dual paper cone woofer • 20 - 10 - 5 - 2.5 Watts 100 Volt transformer • 3,3 metres connection cable with metal safety wire • PAINTCAB8 (option: any ral colour) • Dimensions: 254 mm outside Ø

Page 28

LOUDSPEAKERS INSTALLED SOUND REINFORCEMENT

KOBRA SYSTEMS

KK50, KK200 & KKS50

• Available in Black or White

• Theatres main PA arrays • Front and under-balcony ﬁll • Portable and installed AV systems • Stage and AV-Studios monitoring

TECH BRIEF Acoustics

Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

Coverage Horizontal Vertical

Transducers Full-range

Power Audio Input Connectors Wiring

Selection Switches Circuit Impedance

Recommended Amplifiers (64 Ohm setting) Single ended mode Bridge mode

KK50

KK200

KKS50

150 W1 300W2 64 Ohm -16 Ohm select 200Hz - 19KHz +/- 3dB3 150 Hz - 20 KHz +/- 3dB4 92 dB5 114 dB continuous

600 W1 1600W2 16Ohm - 4 Ohm select 180 Hz - 19 KHz +/- 3dB3 150 Hz - 20 KHz +/- 3dB4 98 dB5 124 dB continuous

300 W1 600W2 32 Ohm - 8 Ohm select 65 Hz - 300 Hz +/- 3dB3 60 Hz - 300 Hz +/- 3dB4 92 dB5 117 dB continuous

100º (single unit) 10º (single unit)

100º (single unit) 7º (single unit)

8 x 2” neodymium 0.75”VC

32x2 neodmium 0.75”VC

4x4” nedymium 1.5”VC

Two x 4 pins Speakom CH1 (1+/1-) - CH2(2+/2-)

Two x 4 pins Speakon CH1(1+/1-) - CH2(2+/2-)

Two x 4 pins peakon CH1(1+/1-) - CH2(2+/2-)

CH1/CH2 wiring possibility 64 Ohm - 16 Ohm select

CH1/CH2 wiring possibility 16 Ohm - 4 Ohm select

CH1/CH2 wiring possibility 32 hm - 8 Ohm select

KA, KA15, KA40 to drive till 16 units each channel KA10, KA15 to drive till 8 units aeach amplifier

Recommended Amplifiers (32 Ohm setting) Single ended mode

KA10, KA15, KA40 to drive till 8 units each channel KA10, KA15 to drive till 4 units each amplifier

Bridge mode

Recommended Amplifiers (16 Ohm setting) Single ended mode Bridge mode

KA0, KA15 to divr till 16 units channel

KA10, KA15, KA40 to drive till 4 units each channel KA10, KA15 to drive till 2 units each amplifier

Recommended Amplifiers (8 Ohm setting) Single ended mode

KA10, KA15 to drive till 2 units each channel

Recommended Amplifiers (4 Ohm setting) Single ended mode

Physical Measures Weight

KA10, KA15 to drive 1 unit each channel 56 x 70 x 500 mm 2 Kg

56 x 70 x 2000 mm 9 Kg

Page 29

110 x 200 x 500 mm 7 Kg

LOUDSPEAKERS INSTALLED SOUND REINFORCEMENT

KOBRA SYSTEMS

KN6

FEATURES • New

APPLICATIONS • New

TECH BRIEF Acoustics

Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

Coverage Horizontal Vertical

Transducers Full-range

Power Audio Input Connectors Wiring

Selection Switches Circuit Impedance

Recommended Amplifiers (64 Ohm setting) Single ended mode Bridge mode

KK50

KK200

KKS50

150 W1 300W2 64 Ohm -16 Ohm select 200Hz - 19KHz +/- 3dB3 150 Hz - 20 KHz +/- 3dB4 92 dB5 114 dB continuous

600 W1 1600W2 16Ohm - 4 Ohm select 180 Hz - 19 KHz +/- 3dB3 150 Hz - 20 KHz +/- 3dB4 98 dB5 124 dB continuous

300 W1 600W2 32 Ohm - 8 Ohm select 65 Hz - 300 Hz +/- 3dB3 60 Hz - 300 Hz +/- 3dB4 92 dB5 117 dB continuous

100º (single unit) 10º (single unit)

100º (single unit) 7º (single unit)

8 x 2” neodymium 0.75”VC

32x2 neodmium 0.75”VC

4x4” nedymium 1.5”VC

Two x 4 pins Speakom CH1 (1+/1-) - CH2(2+/2-)

Two x 4 pins Speakon CH1(1+/1-) - CH2(2+/2-)

Two x 4 pins peakon CH1(1+/1-) - CH2(2+/2-)

CH1/CH2 wiring possibility 64 Ohm - 16 Ohm select

CH1/CH2 wiring possibility 16 Ohm - 4 Ohm select

CH1/CH2 wiring possibility 32 hm - 8 Ohm select

KA, KA15, KA40 to drive till 16 units each channel KA10, KA15 to drive till 8 units aeach amplifier

Recommended Amplifiers (32 Ohm setting) Single ended mode

KA10, KA15, KA40 to drive till 8 units each channel KA10, KA15 to drive till 4 units each amplifier

Bridge mode

Recommended Amplifiers (16 Ohm setting) Single ended mode Bridge mode

KA0, KA15 to divr till 16 units channel

KA10, KA15, KA40 to drive till 4 units each channel KA10, KA15 to drive till 2 units each amplifier

Recommended Amplifiers (8 Ohm setting) Single ended mode

KA10, KA15 to drive till 2 units each channel

Recommended Amplifiers (4 Ohm setting) Single ended mode

Physical Measures Weight

KA10, KA15 to drive 1 unit each channel 56 x 70 x 500 mm 2 Kg

56 x 70 x 2000 mm 9 Kg

Page 30

110 x 200 x 500 mm 7 Kg

LOUDSPEAKERS INSTALLED SOUND REINFORCEMENT

NINJA SYSTEMS

KJ50UB

FEATURES • New

APPLICATIONS • New

TECH BRIEF Acoustics

Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

Coverage Horizontal Vertical

Transducers Full-range

Power Audio Input Connectors Wiring

Selection Switches Circuit Impedance

Recommended Amplifiers (64 Ohm setting) Single ended mode Bridge mode

KK50

KK200

KKS50

150 W1 300W2 64 Ohm -16 Ohm select 200Hz - 19KHz +/- 3dB3 150 Hz - 20 KHz +/- 3dB4 92 dB5 114 dB continuous

600 W1 1600W2 16Ohm - 4 Ohm select 180 Hz - 19 KHz +/- 3dB3 150 Hz - 20 KHz +/- 3dB4 98 dB5 124 dB continuous

300 W1 600W2 32 Ohm - 8 Ohm select 65 Hz - 300 Hz +/- 3dB3 60 Hz - 300 Hz +/- 3dB4 92 dB5 117 dB continuous

100º (single unit) 10º (single unit)

100º (single unit) 7º (single unit)

8 x 2” neodymium 0.75”VC

32x2 neodmium 0.75”VC

4x4” nedymium 1.5”VC

Two x 4 pins Speakom CH1 (1+/1-) - CH2(2+/2-)

Two x 4 pins Speakon CH1(1+/1-) - CH2(2+/2-)

Two x 4 pins peakon CH1(1+/1-) - CH2(2+/2-)

CH1/CH2 wiring possibility 64 Ohm - 16 Ohm select

CH1/CH2 wiring possibility 16 Ohm - 4 Ohm select

CH1/CH2 wiring possibility 32 hm - 8 Ohm select

KA, KA15, KA40 to drive till 16 units each channel KA10, KA15 to drive till 8 units aeach amplifier

Recommended Amplifiers (32 Ohm setting) Single ended mode

KA10, KA15, KA40 to drive till 8 units each channel KA10, KA15 to drive till 4 units each amplifier

Bridge mode

Recommended Amplifiers (16 Ohm setting) Single ended mode Bridge mode

KA0, KA15 to divr till 16 units channel

KA10, KA15, KA40 to drive till 4 units each channel KA10, KA15 to drive till 2 units each amplifier

Recommended Amplifiers (8 Ohm setting) Single ended mode

KA10, KA15 to drive till 2 units each channel

Recommended Amplifiers (4 Ohm setting) Single ended mode

Physical Measures Weight

KA10, KA15 to drive 1 unit each channel 56 x 70 x 500 mm 2 Kg

56 x 70 x 2000 mm 9 Kg

Page 31

110 x 200 x 500 mm 7 Kg

LOUDSPEAKERS INSTALLED SOUND REINFORCEMENT

KR100S FEATURES • New

Page 32

LOUDSPEAKERS INSTALLED SOUND REINFORCEMENT

KR200S FEATURES • New

Page 33

LOUDSPEAKERS INSTALLED SOUND REINFORCEMENT

KF128 FEATURES • New

Page 34

LOUDSPEAKERS INSTALLED SOUND REINFORCEMENT

KS4

- High technology self-powered “8 figure” flat subwoofer

FEATURES • Unique performance-to-size ratio • Self powered • Integrated DSP and remote control • “8 ﬁgure” horizontal and vertical coverage • Ultra-slim shape • Integrated ﬂying and stacking hardware • Top quality components for outstanding performances • Quick and easy assembling and disassembling • For use in stand alone arrays or in combination with other K-array systems

APPLICATIONS • Large scale events • Stadiums, arenas, concert halls, theatres • Sound reinforcement for tours • Installation for low-load restriction

TECH BRIEF ACOUSTICS Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

4000 W1 6000 W2 8 x 4 Ohm 45 Hz - 120 Hz +/- 3dB (preset relating)3 30 HZ - 150 Hz +/- 3dB (preset relating)4 103 dB5 132 dB continuos - 138 dB peak6

COVERAGE Horizontal Vertical

120° 120°

CROSS OVER Type Frequency

DSP controlled preset relating 150 Hz max suggested (preset relating)7

TRANSDUCERS Low frequency

8 x 10” Neodymium speakers with 2” voice coil

AUDIO INPUT Connectors Wiring

male + female parallel 3 poles balanced XLR Pin1 = ground / Pin2 = hot / Pin3 = cold

REMOTE CONTROL INPUT Connectors

2 x female 8 poles RJ45

POWER INPUT Connectors

2 x PowerCon IN/OUT

AMPLIFIERS

Type Power

Protections AC POWER Operating range Max continuos and burst current PHYSICAL Measures Weight

4 modules class D - DSP controlled 500 Watt x 8 channels on 4 Ohm (4000 Watt total)8 Dynamic limiter, over current, over temp, short circuits Standard 210 - 240 Vac 50Hz (standard) Optional 100 - 120 Vac 60Hz (optional) Standard 12A (>10 sec) - 24A (<1 sec) Optional 20A (>10 sec) - 40A (<1sec) 112 x 60 x 16 cm 37 Kg

Page 35

LOUDSPEAKERS INSTALLED SOUND REINFORCEMENT

KH4

- High technology self-powered line-array element

FEATURES • Unique performance-to-size ratio • Self powered • Integrated DSP and remote control • Adjustable vertical coverage • Wide horizontal coverage • Ultra-slim shape • Integrated ﬂying hardware • Top quality components for outstanding performances • Quick and easy assembling and disassembling • For use in stand alone arrays or in combination with other K-array systems

APPLICATIONS • Large scale events • Stadiums, arenas, concert halls, theatres • Sound reinforcement for tour • Installation for low-load restriction

TECH BRIEF ACOUSTICS Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

3600 W + 400 W1 5000 W + 700 W2 6 x 4 Ohm + 1 x 8 Ohm + 1 x 6 Ohm 60 Hz - 19 KHz +/- 3dB (preset relating)3 40 HZ - 20 KHz +/- 3dB (preset relating)4 105 dB (low-mid) + 113 dB (high 1) + 114 dB (high 2)5 139 dB continuos - 145 dB peak6 120° mechanically adjustable from 7° to 37°

CROSS OVER Type Frequency

DSP controlled preset relating 1.2 KHz minimum (preset relating)7

High frequency

male + female parallel 3 pins balanced XLR Pin1 = ground / Pin2 = hot / Pin3 = cold

REMOTE CONTROL INPUT Connectors

2 x female 8 pins RJ45

POWER INPUT Connectors

2 x PowerCon IN/OUT

AMPLIFIERS

COVERAGE Horizontal Vertical

TRANSDUCERS Low - Mid frequency

AUDIO INPUT Connectors Wiring

Type Power

Protections

12 x 8” Neodymium cone drivers with 2.5” voice coil 5 x 1” Neodymium planar wave drivers with 1.75” voice coil

AC POWER Operating range Max continuos and burst current PHYSICAL Measures Weight

4 modules class D - DSP controlled 500 Watt x 8 channels on 4 Ohm (4000 Watt total)8 Dynamic limiter, over current, over temp, short circuits Standard 210-240 Vac 50Hz (standard) Optional 100-120 Vac 60Hz (optional) Standard 12A(>10 sec) - 24A (<1 sec) Optional 20A(>10 sec) - 40A (<1sec) 112 x 60 x 16 cm 47 Kg

Page 36

LOUDSPEAKERS INSTALLED SOUND REINFORCEMENT

KH15

- High technology self-powered line-array element

FEATURES • Unique performance-to-size ratio • Self powered • Integrated DSP and remote control • Wide horizontal coverage • Ultra-slim shape • Integrated ﬂying hardware • Integrated 35mm pole adapter • Top quality components for outstanding performances • Quick and easy assembling and disassembling • For use in stand alone arrays or in combination with other K-array systems

APPLICATIONS • Medium scale events • Front ﬁll sound reinforcement • Stadiums, concert halls, theatres • Installation for low-load restriction

TECH BRIEF ACOUSTICS Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL COVERAGE Horizontal Vertical CROSS OVER

Type Frequency

TRANSDUCERS Low - Mid frequency High frequency AUDIO INPUT Connectors

1500 W + 160 W1 2000 W + 250 W2 4 Ohm + 4 Ohm - 16 Ohm + 16 Ohm 60 Hz - 19 KHz +/- 3dB (preset relating)3 70 HZ - 20 KHz +/- 3dB (preset relating)4 99 dB (low-mid) + 113 dB (high)5 130 dB continuos - 136 dB peak6 120° 15°

Wiring

Pin1 = ground / Pin2 = hot / Pin3 = cold

REMOTE CONTROL INPUT Connectors

2 x female 8 pins RJ45

POWER INPUT Connectors

2 x PowerCon IN/OUT

AMPLIFIERS

Type Power

Protections

DSP controlled (preset relating) 1.2 KHz minimum (preset relating)7

AC POWER Operating range

2 x 8” Neodymium cone drivers with 3” voice coil 2 x 1” Neodymium planar wave drivers with 1.75” voice coil

Max continuos and burst current

male + female parallel 3 pins balanced XLR

PHYSICAL Measures Weight

1 modules class D - DSP controlled 750 W x 2 channels on 4 Ohm + 250 W on 8 Ohm8 Dynamic limiter, over current, over temp, short circuits Standard 210 - 240 Vac 50Hz (standard) Optional 100 - 120 Vac 60Hz (optional) Standard 6A(>10 sec) - 12A (<1 sec) Optional 10A(>10 sec) - 20A (<1sec) 56 x 25 x 16 cm 12 Kg

Page 37

LOUDSPEAKERS INSTALLED SOUND REINFORCEMENT

KM8

- Ultra compact Line Array Stage Monitor System

FEATURES • Unique performance-to-size ratio • Single 8” ultra-long excursion bass driver • Twin waveguide constant directivity coverage • Two neodymium motor 1.75” voice coil compression driver • Narrow horizontal coverage, optimised to make versatile line-array stage monitors • Wide asymmetrical vertical coverage • Integrated connection hardware • Top quality components for outstanding performances • For use in stand alone or in Line Array

APPLICATIONS

• Monitor System applications

• From smallest to largest stages • Touring monitoring

TECH BRIEF ACOUSTICS Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

600 W1 1000 W2 10 W 65 Hz - 19 KHz +/- 3dB (preset relating)3 50 HZ - 20 KHz +/- 3dB (preset relating)4 96 dB (low-mid)5 124 dB continuos - 130 dB peak6

POWER AUDIO INPUT Connectors Wiring

Two x 4 pins SPEAKON CH 1 (1+ / 1-) - CH 2 (2+ / 2-)

SELECTION SWITCHES Connectors

CH 1 / CH 2 wiring mode possibility

POWER INPUT Connectors

2 x Speakon IN/OUT

COVERAGE Horizontal Vertical

20°(single unit) - array dependent 100°

CROSS OVER Type Frequency

RECOMMENDED AMPLIFIERS Single ended mode KA10 and KA15 to drive till 2 units each channel KA40 to drive till 3 units each channel Bridge mode KA10 to drive ones unit each amplifier

Passive high-grade 18 dB/oct. 1.5 KHz7

PHYSICAL Measures

TRANSDUCERS Low - Mid frequency High frequency

26 x 28 x 35 cm Weight 10 Kg

8” Neodymium cone driver with 3” voice coil 2 x Neodymium compression drivers with 1.75” voice coil on 4”x1” wave-guide

Page 38

LOUDSPEAKERS SUBWOOFERS

SUB - FOUNDATIONS SUBBY • New

• 3HB2261-BL

• 3HB2261-W

SUBLIME-W/BL FEATURES • Extremely slim and compact, but yet produces a full, deep base • Built-in stereo X-over : the ideal partner for MASK2 satellite speakers • Wall mounting brackets included • 6.5” dual coil woofer • 2 x 80 Watts @ 8 Ohm • Dimensions : 420 (h) x 470 (w) x 120 (d) mm

Page 39

LOUDSPEAKERS SUBWOOFERS

SUB - FOUNDATIONS SUB2400, SUB2400-W • David beats Golliath • Very robust Plywood construction • Stronger and “faster” than bigger 15” subs • 2 pcs 10” dual coil long Xmax woofer • 2 x 400 Watts program power • 4Ω or 16Ω selector at back panel • Protection-Guard™ technology • Dimensions: 700 (h) x 352 (w) x 450 (d) mm • Dimensions (L = R): 243 (h) x 180 (w) x 148 (d) mm

• SUB2400

• SUB2400-W

SUB - FOUNDATIONS SUB2200

• Feel the vibes ! • 10” dual coil long Xmax woofer • 2 x 200 Watts program power • Protection-Guard™ technology • Stereo x-over output for top-satellites • Dimensions: 619 (h) x 298 (w) x 385 (d) mm

Page 40

LOUDSPEAKERS SUBWOOFERS

SUBA165 - COMPACT SUBA165 • Compact, yet powerfull • 8” HD type woofer • Adjustable active x-over • 140 Watts power ampliﬁer, auto -on/off • Line or speakerline inputs • Passive stereo low-Cut x-over for top satellites • Dimensions : 362 (h) x 261 (w) x 405 (d) mm

SUBTITLE - THIN SUBTITLE-BL, SUBTITLE-W

Probably the thinnest sub in the world… • Brings incredible vibes in shops, lounge bars or in a living room • 125 W @ 4 Ohm program power • Wall bracket suspension system included • Perfect match with Champ-4 ampliﬁer • Dimensions: 450 (H) x 500 (W) x 120 (D) mm

Custom-designed to be integrated inconspicuously into any interior, or to be hidden under a closet, behind a curtain or under a sofa.

CMSUB8

- In Ceiling Subwoofer

FEATURES • 8” built-in stereo subwoofer (dual coil) • Discrete, stylish and inconspicuous design • Passive X-over filter incorporated • Ideal in combination with compact cabinet speakers and small ceiling speakers • Active configuration: ideal with CHAMP4 amplifier • Aluminium grill and coated paper cone; can be used in humid places • 2 x 80 Watts program power @ 8 Ohm • Dimensions : 246 mm diameter x 106 mm depth • Cutout diameter : 226 mm

Page 41

LOUDSPEAKERS SUBWOOFERS

KKS50

text

FEATURES • New APPLICATIONS • New

New text.

TECH BRIEF TRANSDUCERS Full range

2” Neodymium cone driver with 0.75” voice coil

POWER INPUT Connectors

Speakon (1+/1-) or RJ45 (1+/2-) Input

ACOUSTICS Power handling Max power Impedance Operating frequency range Frequency range SPL 1W/1mt Maximum SPL

10W1 30W2 32 OHM (8 OHM VERSION AVAILABLE) 300Hz - 18KHz +/- 3dB (preset relating)3 200Hz - 18KHz +/- 3dB (preset relating)4 87 dB (low-mid)5 101 dB continuous - 107 dB peak6

COVERAGE Horizontal Vertical

90º 90º

CROSS OVER Type Frequency

External cross over required 150 Hz 24dB/oct minimum suggested

PHYSICAL Measures Weight

Page 42

6.4cm dia x 9.3cm deep 0.35 Kg

LOUDSPEAKERS SUBWOOFERS

OVERBASS

TECH BRIEF

- High tech subwoofers

Ko15

Ko30

Ko40

Ko70

1000 w1 2000 w2 8 Ohm 40 Hz - 120 Hz +/- 3dB3 30 HZ - 150 Hz +/- 3dB4 98 dB5 129 dB continuos 135 dB peak6

2000 w1 3000 w2 2 x 8 Ohm 40 Hz - 120 Hz +/- 3dB3 30 HZ - 150 Hz +/- 3dB4 101 dB5 133 dB continuos 139 dB peak6

1500 w1 4000 w2 8 Ohm 30 Hz - 120 Hz +/- 3dB3 25 HZ - 150 Hz +/- 3dB4 96,5 dB5 130 dB continuos 136 dB peak6

3000 w1 8000 w2 2 x 8 Ohm 30 Hz - 120 Hz +/- 3dB3 20 HZ - 150 Hz +/- 3dB4 99,5 dB5 136 dB continuos 140 dB peak

COVERAGE Horizontal Vertical

omni-array dependent omni-array dependent

CROSS OVER Type Frequency

DSP controlled preset relating 150 Hz max suggested7

18” High excursion neodymium speaker with 4” voice coil

2x18” High excursion 21” High excursion neodymium neodymium speaker 4” voice coil speaker with 6” voice coil

2x21” High excursion neodymium speaker with 4” voice coil

male + female parallel 3 poles bal XLR Pin1 = ground Pin2 = hot Pin3 = cold

2 x female 8 poles RJ45

2 x PowerCon IN/OUT

Class D - DSP controlled 1500 watts on 8 ohm8 Dynamic limiter, over current, over temp, short circuits

2 x Class D - DSP controlled 1500 watts x 2 ch on 8 ohm8 Dynamic limiter, over current, over temp, short circuits

Class D - DSP controlled 4000 watts on 8 ohm8 Dynamic limiter, over current, over temp, short circuits

2 x Class D - DSP controlled 3500 watts x 2 ch on 8 ohm8 Dynamic limiter, over current, over temp, short circuits

Standard 210 - 240 Vac 50Hz Optional 100 - 120 Vac 60Hz Standard 6A (>10 sec) 12A (<1 sec) Optional 10A (>10 sec) 20A (<1sec)

Standard 210 - 240 Vac 50Hz Optional 100 - 120 Vac 60Hz Standard 12A (>10 sec) 24A (<1 sec) Optional 20A (>10 sec) 40A (<1sec)

Standard 100-240 Vac 50-60Hz Standard 100 - 240 Vac 50-60Hz (Autorange) (Autorange) Standard 10A (>10 sec) Standard 16A (>10 sec) 20A (<1 sec) 32A (<1 sec)

60 x 60 x 85 cm 30 Kg

115 x 60 x 85 cm 50 Kg

60 x 60 x 85 cm 42 Kg

ACOUSTICS Power handling Max power Impedance Operating freq. range Frequency range SPL 1W/1mt Maximum SPL

TRANSDUCERS Low frequency AUDIO INPUT Connectors Wiring

REMOTE CONTROL INPUT Connectors Power Input Connectors AMPLIFIERS Type Power Protections AC POWER Operating range Max continuos and burst current

PHYSICAL Measures Weight

Page 43

115 x 60 x 85 cm 78 Kg

LOUDSPEAKERS SUBWOOFERS

KNS10

- High tech subwoofers

TECH BRIEF

Ko15

Ko30

Ko40

Ko70

1000 w1 2000 w2 8 Ohm 40 Hz - 120 Hz +/- 3dB3 30 HZ - 150 Hz +/- 3dB4 98 dB5 129 dB continuos 135 dB peak6

2000 w1 3000 w2 2 x 8 Ohm 40 Hz - 120 Hz +/- 3dB3 30 HZ - 150 Hz +/- 3dB4 101 dB5 133 dB continuos 139 dB peak6

1500 w1 4000 w2 8 Ohm 30 Hz - 120 Hz +/- 3dB3 25 HZ - 150 Hz +/- 3dB4 96,5 dB5 130 dB continuos 136 dB peak6

3000 w1 8000 w2 2 x 8 Ohm 30 Hz - 120 Hz +/- 3dB3 20 HZ - 150 Hz +/- 3dB4 99,5 dB5 136 dB continuos 140 dB peak

COVERAGE Horizontal Vertical

omni-array dependent omni-array dependent

CROSS OVER Type Frequency

DSP controlled preset relating 150 Hz max suggested7

18” High excursion neodymium speaker with 4” voice coil

2x18” High excursion 21” High excursion neodymium neodymium speaker 4” voice coil speaker with 6” voice coil

2x21” High excursion neodymium speaker with 4” voice coil

male + female parallel 3 poles bal XLR Pin1 = ground Pin2 = hot Pin3 = cold

2 x female 8 poles RJ45

2 x PowerCon IN/OUT

Class D - DSP controlled 1500 watts on 8 ohm8 Dynamic limiter, over current, over temp, short circuits

2 x Class D - DSP controlled 1500 watts x 2 ch on 8 ohm8 Dynamic limiter, over current, over temp, short circuits

Class D - DSP controlled 4000 watts on 8 ohm8 Dynamic limiter, over current, over temp, short circuits

2 x Class D - DSP controlled 3500 watts x 2 ch on 8 ohm8 Dynamic limiter, over current, over temp, short circuits

Standard 210 - 240 Vac 50Hz Optional 100 - 120 Vac 60Hz Standard 6A (>10 sec) 12A (<1 sec) Optional 10A (>10 sec) 20A (<1sec)

Standard 210 - 240 Vac 50Hz Optional 100 - 120 Vac 60Hz Standard 12A (>10 sec) 24A (<1 sec) Optional 20A (>10 sec) 40A (<1sec)

Standard 100-240 Vac 50-60Hz Standard 100 - 240 Vac 50-60Hz (Autorange) (Autorange) Standard 10A (>10 sec) Standard 16A (>10 sec) 20A (<1 sec) 32A (<1 sec)

60 x 60 x 85 cm 30 Kg

115 x 60 x 85 cm 50 Kg

60 x 60 x 85 cm 42 Kg

ACOUSTICS Power handling Max power Impedance Operating freq. range Frequency range SPL 1W/1mt Maximum SPL

TRANSDUCERS Low frequency AUDIO INPUT Connectors Wiring

REMOTE CONTROL INPUT Connectors Power Input Connectors AMPLIFIERS Type Power Protections AC POWER Operating range Max continuos and burst current

PHYSICAL Measures Weight

Page 44

115 x 60 x 85 cm 78 Kg

LOUDSPEAKERS MUSIC & PAGING HORNS

MP16-G • Compact and stylish sound projector • 5.5” coated paper dual cone woofer • 16 - 10 - 5 Watts 100 Volt transformer • All metal parts aluminum or stainless steel: no rust • PAINT MP (option: any RAL colour) • Dimensions: 138 (diameter) x 200 (l) mm MP26-G • Powerful and stylish sound projector • 6.5” coated paper dual cone woofer • 26 - 20 - 10 Watts 100 Volt transformer • All metal parts aluminum or stainless steel: no rust • PAINT MP (option: any RAL colour) • Dimensions: 170 (diameter) x 240 (l) mm MPH30-G • Horn loaded sound projector • 5.25” treated paper cone woofer • 30 - 20 - 15 - 10 - 5 Watts 100 Volt or 8Ω • Epoxy coated bracket included : no rust • PAINTMP (option : any RAL colour) • Dimensions : 180 (diameter) x 200 (l) mm MPBD15 • Bi-directional sound projector • 2 x 5.25” treated paper cone woofer • 15 - 7.5 - 3.75 Watts 100 Volt transformer • Stainless steel bracket : no rust • PAINTMP (option:any RAL colour) • Dimensions : 150 (Ø) x 196 (l) mm

Page 45

LOUDSPEAKERS MUSIC & PAGING HORNS

H10-G

• Compact compression horn loudspeaker • For high background noise use • Ideal for speech and alarm signals • Selector 10 - 5 - 2.5 - 1.25 W in 100 V or 8Ω • IP66 + Stainless steel bracket (no rust) • Diameter: 140 mm – Length: 192 mm H20-G

• Powerful compression horn loudspeaker • For high background noise use • Ideal for speech and alarm signals • Selector 20 - 10 - 5 - 2.5 W in 100 V or 8Ω • IP66 + Stainless steel bracket (no rust) • Diameter: 200 mm – Length: 232 mm H30LT-G

• Long throw compression horn loudspeaker • Wide dispersion, high efﬁciency • Ideal for speech and alarm signals • Selector 30 - 15 - 7.5 - 3.75 W in 100 V or 8Ω • IP66 + Stainless steel bracket (no rust) • Dimensions : 208 x 285 x 290 mm (h x w x l) MPLT32-G

• High quality 2-way long throw music projector • 6.5” cone woofer & 1” horn driver • 32 - 16 - 8 - 4 Watts 100 Volt transformer • IP66 + Aluminium bracket (no rust) • PAINTMPLT (option: any RAL colour) • Dimensions : 250 (h) x 360 (w) x 290 (d) mm MPLT62-G

• Very powerful 2-way long throw music projector • 6.5” cone woofer & 1” horn driver • 62 - 32 - 16 - 8 Watts 100 Volt transformer • IP66 + Aluminium bracket (no rust) • PAINTMPLT (option: any RAL colour) • Dimensions : 250 (h) x 360 (w) x 290 (d) mm

Page 46

Amplifiers

Syntec International Australia: Free Call 1800 648 628 | email: sales@syntec.com.au Syntec International New Zealand: Free Call 0800 100 755 | email: sales@syntec.co.nz

AMPS POWER AMPS

CHAMP-ONE

- Power Amplifier

WHY - AUDIOPHILE • Created by our high-end audio engineering team • Realised by our professional-audio engineering team • Approved by our customers’ listening teams • Pure, open, pleasing sound quality • High power, incredible dynamic punch • Very loud sounding … without sounding hard

• It loves music! No clipping allowed… • ‘tube’ emulation for exceptional warm sound • Full analogue design, but close to class-D efﬁciency

PERFORMANCE CHARACTERISTICS • Headroom power 2x400W – 2x600W (8 - 4 Ohm / Ch.) • Dynamic power capacity ; 750 Watts/Ch. , > 20 Ampere • Sine wave power(*) 2x300W – 2x450W (8 - 4 Ohm / Ch.) • 46.000 uF high grade electrolytic capacitors • Compact and high power toroidal transformer • Genuine Neutrik speakon connectors • Speaker wire binding posts

• Doubled RCA - XLR Neutrik input connectors • Net dimensions and weight : 483 (w) x 88 (h) x 380 (d)mm, 13 kg (*) Sine wave is like a siren, it is not an audiophile music experience

Page 48

AMPS POWER AMPS

INSTALLER BENEFITS SILENT - FREE AIR COOLING - NO FAN • Electronics stay dustfree • No ventilator noise • No maintenance or cleaning • 24h/24h hour operation • Most efﬁcient APart heatsink design • Temperature and power monitored by APC • One big PCB, so no internal cables and connectors • Light weight, self-supporting aluminium chassis • Strong and detachable 19” bracket system

INSTALLER BENEFITS APC - AUTOMATIC POWER CONTROL • Keeps music musical, no harsh or overload sound • Keeps your speakers and the users out of trouble • Preset of max program power (150 – 600W/ch) • One model can fulﬁll all your applications • Settings can be covered and secured

Page 49

AMPS POWER AMPS

CHAMP-2

- Power Amplifier

• High power, dynamic punch • Unequalled pure music quality • Loud, without sounding hard • No clipping, no distortion : APC keeps control • Can drive 3 pcs of 8 Ohm speakers in parallel per channel • Individual level control on front

INSTALLER BENEFITS • No ventilator, no noise, no dust problem • No maintenance or cleanout procedure needed • unique self-supporting aluminum chassis • strong detachable 19” brackets, no support needed

PERFOMANCE CHARACTERISTICS • Headroom power 2x200 W (8 Ohm), 2 x 350 W (4 Ohm), 2 x 450 W (2.7 Ohm) • Dynamic power capacity : 600 W/ch • Sine Wave power(*): 2 x 120 W (8 Ohm) / 2 x 180 W (4 Ohm) / 2 x 200 W (2.7 Ohm) • Heavy duty power supply • Doubled RCA-XLR input connectors, speaker wire binding posts • Net dimensions : 48.3 x 4.4 x 36 mm (*) Sine wave is like a siren, it is not an audiophile music experience

Page 50

AMPS POWER AMPS

CHAMP-4

- Power Amplifier

• High power, dynamic punch • Unequalled pure music quality • Loud, without sounding hard • No clipping, no distortion : APC keeps control • Active ﬁlter channels 3 and 4 • Individual level control on front

PERFOMANCE CHARACTERISTICS • Headroom power 4x75 W (8 Ohm), 4 x 125 W (4 Ohm) • Heavy duty power supply • Net dimensions : 48.3 x 4.4 x 36 mm

Page 51

AMPS POWER AMPS

PA2120MKII

- SILENT POWER

• Silent & reliable stereo power ampliﬁer

• Convectional cooling, limiters included

• 2 x 120 Watts RMS @ 2, 4 or 8Ω

• Dimensions: 44 (h) x 483 (w) x 325 (d) mm

• Output impedance selector 2-4-8 � • Monitor phone output

PA4060

MULTI ZONE

• Perfect for multi-zone • 4-channel power ampliﬁer • 4 x 60 Watts RMS @ 4Ω

PA4060

MULTI ZONE

• Optional 19” support bracket for PA2120MKII & PA4060

Page 52

AMPS POWER AMPS

PA240P - ENDURANCE

• Ultra reliable 240 Watts 100 Volt power ampliﬁer • Line input & adjustable priority line input • 24V priority output • Operates with 24V DC or 230V AC • Bass – treble tone control • Dimensions: 88 (h) x 433 (w) x 360 (d) mm

• Metal cover to avoid unauthorized volume and tone control adjustment of the ampliﬁer

PA2240BP - 1 OR 2-CHANNEL

• 2-channel 100 Volt power ampliﬁer • 2 x 240 Watts, bridgeable into 1 x 480 Watts 70-100V • Extra priority input per channel • Volume and tone control per channel • 24V output power available when priority is activated • Operates with 230V AC or 24V DC • Detachable 19” brackets included

Page 53

AMPS POWER AMPS

PA8250

- 8 CHANNEL

• 8-channel power ampliﬁer

• Mono – stereo switches

• 8 x 150 Watts in 8 ohm, 8 x 250 Watts in 4 Ohm

• Dimensions : 132 (h) x 483 (w) x 484 (d) mm

• Per 2 channels bridgeable: 4 x 500 Watts in 8 Ohm bridged • Clever Input signal routing by switches on rear panel • 75Hz Low-cut Filter (defeatable)

PT8120

MONITOR & TRANSFORMER

• 8 Toroïdal 50 - 70 - 100V transformers of 120 Watts • 8 x 120 Watts or 4 x 240 Watts possible • With integrated loudspeaker + VU LED’s for 8-channel monitoring • Channel selection at front panel via push button • Ideal in combination with the PA8250 power ampliﬁer • Dimensions : 82 (h) x 483 (w) x 350 (d) mm

Page 54

AMPS POWER AMPS

PUBDRIVE-2000

- HUGE POWER

• 3 channel power ampliﬁer

• L & R top channel: 2 X 440 Watts @ 2.7Ω

• Adjustable X-over for L & R top channel (70-120 Hz)

• Dimensions: 134 (h) x 483 (w) x 482 (d) mm

• Pre-amp out / Amp-in for external processors or links • Build in extended AP® limiter • SUB channel: 1200 Watts RMS @ 2Ω

EIGHTPACK - FLEXIBLE 100 Watts / 100 Volts : Lobby 120 Watts / 100Volts : Meeting room 40 Watts / 100Volts : Toilets 120 Watts / 100Volts : Restaurant 120 Watts / 100Volts : Parking 240 Watts / 100Volts : Sport ﬁelds STEREO 250 Watts / 4� : Lounge bar

•System example : Hotel

COMBINATION The PA8250 and the PT8210 form a compact but versatile combination of power amp and 100 V transformer. It offers a maximum of ﬂexibility to build a custom-designed system with 100 V and low impedance zones and it allows the installer to monitor each zone from the central rack location.

Page 55

AMPS POWER AMPS

- High technology Class D power amplifiers line

FEATURES • Over-light weight • Compact design, 2U rack for 4 chs • Optical limiters • Electronically protected • Over-high efﬁciency • DSP on-board to drive all K-array products • Remote control via RS-485 and dedicated management software • Top quality components for outstanding performances • Aluminum frame

TECH BRIEF

KA10

KA15

KA40

KA10-10

OUTPUT POWER Continuous 4Ohm (0.5% THD) EIAJ 4Ohm (1% THD) Continuous 8Ohm (0.5% THD) EIAJ 8Ohm (1% THD) Bridged-EIAJ 8Ohm (1% THD)

2 x 390 W1 2 x 500 W2 2 x 240 W1 2 x 260 W2 1000 W2

2 x 540 W1 2 x 750 W2 2 x 340 W1 2 x 370 W2 1500 W2

2 x 1500 W1 2 x 2000 W2 2 x 1100 W1 2 x 1200 W2 4000 W2

4 x 390 W1 4 x 500 W2 4 x 240 W1 4 x 260 W2

AUDIO SPECS Slew Rate 8Ohm S/N Ratio Distortion Input impedance Gain Output Bandwidth Damping Factor 8Ohm (100Hz)

50V/uS >105 dB/A <0.5 (THD, DIM, SMPTE) 20K bal. 10K unbal. Variable Unbalanced to ground 10 Hz - 30 KHz >500

30V/uS >108 dB/A <0.5 (THD, DIM, SMPTE) 20K bal. 10K unbal. Variable Unbalanced to ground 5 Hz - 25 KHz >300

50V/uS >105 dB/A <0.5 (THD, DIM, SMPTE) 20K bal. 10K unbal. Variable Unbalanced to ground 10 Hz - 30 KHz >500

PROTECTIONS Thermal protection Short circuit / over-load Clip Limiter, Perm. sig. limiter

Yes Yes Yes

AUDIO INPUT Connectors Wiring

2 x male + 2 x fem. bal. XLR 1=gnd 2=hot 3 = cold

REMOTE CONTROL INPUT Connectors

2 x female 8 pins RJ45

POWER OUTPUT Connectors

2 x SPEAKON 4 pins

POWER INPUT Connectors

2 x PowerCon IN/OUT

Max continuos and burst current

EU 210 - 240 Vac 50Hz USA 100 - 120 Vac 60Hz EU 5A(>10s) - 10A (<1s) USA 10A(>10s) - 20A(<1s)

EU 210 - 240 Vac 50Hz USA 100 - 120 Vac 60Hz EU 6.3A(>10s) - 12A (<1s) USA 12A(>10s) - 24A(<1s)

85 - 270 Vac 50/60Hz Universal with up to 400 Vac Overvoltage tolerance 12A(>10s) - 24A(<1s)

EU 210 - 240 Vac 50Hz USA 100 - 120 Vac 60Hz EU 6.3A(>10s) - 12A (<1s) USA 12A(>10s) - 24A(<1s)

PHYSICAL Measures Weight

88(2U)x200(1/2U)x485mm 3.5 Kg

88(2U)x200(1/2U)x485mm 5 Kg

88(2U)x200(1/2U)x485mm 4.5 Kg

AC POWER Operating range

Page 56

AMPS MIXING AMPS

MA35 - COMPACT • Compact 35 Watts 100 Volt mixing ampliﬁer • 3 mic (phantom via internal switch), 2 line inputs • 2 level priority system (VOX & contact closure) • Integrated 2-tone chime (adjustable volume) • Operates with 12V DC or 230V AC • Build-in dynamic limiter (-3 dB) • Dimensions: 88 (h) x 272 (w) x 286 (d) mm

MA65 - COMPLETE • Same features as MA35 • Compact 65 Watts 100 Volt mixing ampliﬁer • Operates with 24V DC or 230V AC • Dimensions: 88 (h) x 272 (w) x 286 (d) mm

MA35 - BRACKET • Metal 19” 2U mounting bracket for the MA35 and MA65 ampliﬁer

MA125 - POWER

• High quality 125 Watts 100 Volt mixing ampliﬁer

• Integrated 2-tone chime (adjustable volume)

• 4 mic (phantom via switch at the back), 4 line inputs

• Build-in dynamic limiter (-3dB)

• 3 level priority system, 24V priority output

• Dimensions: 88 (h) x 430 (w) x 240 (d) mm

Page 57

AMPS MIXING AMPS

CONCEPT1

- The Professional Solution

• 4 stereo line inputs

• Control via RS-232 or optional IR

• 1 Mic input - can be mixed with line inputs

• Reliable 24/7 : extended limiters inside

• Separate user and expert settings

• Dimensions : 430 (w) x 88 (h) x 320(d)

CONCEPT1 - 2X4Ω AMPLIFIER • 2-zone integrated stereo mixing ampliﬁer • 2 x 80 Watts @ 4 Ohm

CONCEPT1T - 100V AMPLIFIER

• Removable rack ears included

• 2-zone integrated stereo mixing ampliﬁer • 2 x 80 Watts @ 4 Ohm

SETTINGS USER

EXPERT

• SIMPLE and EASY

• ADVANCED and SECURED

• Music Volume Control • Mic level control

• Zone mode settings

• Bass-Treble tone control

o 1 stereo zone o 2 volume linked mono zones o 2 individual mono zones • Maximum music & Mic volume • Gain input adjustment • Automatic loudness on/off • Paging on/off per zone

Page 58

AMPS MIXING AMPS

1 UNIT - 3 Operating Maodes VOLUME

Concept1 gives you the choice between 1 stereo zone, 2 individual zones or 2 individual volume-linked zones*, at the touch of a button! *In a volume-linked zone system, the volume of both zones goes up or down simultaneously at the turn of the volume button, while maintaining the proportional volume difference between the two zones.

• 1 STEREO zone

CONCEPT OPTIONS VOLUME

VOLUME

• CONCEPT1T-KIT : transfers a Concept1 into a 100V CONCEPT1T

• MICPAT-2 : 2 Zone dynamic paging microphone (see p 70) • 2 individual zones

• CONCEPT1-RC : Infrared remote control

VOLUME

• 2 individual volume linked zones

Page 59

AMPS MIXING AMPS

MA200CDR - ALL IN ONE

• High quality 200 Watts 100 Volt mixing ampliﬁer

• 4 output zones (Zone 4: Mic / music selection)

• Integrated AM/FM tuner and CD/MP3 player

• Build-in dynamic limiter (-3 dB)

• 4 mic (phantom via internal switch), 4 line inputs

• Dimensions: 88 (h) x 430 (w) x 375 (d) mm

• 3 level priority system, 24V priority output • Integrated 2-tone chime (adjustable volume)

MA200R - RECEIVER

• Same as above, with AM/FM tuner only

MA200 - BASICS

• Same as above, without any music source

Page 60

AMPS MIXING AMPS

MA246

INPUTS • 4 line, sources • Zone paging mic/line • 3 line/mic-phantom • Emergency/telephone • Chime with level control • 6 priority levels possible • Tone control per input • External paging ampliﬁer input

OUTPUTS

ZONE • Selective paging possible • Independent zone for use with external amp • Individual source selection and volume control

ZONE 2-6 • 240 watts internal ampliﬁer • Can have a different line source than zone 1 ampliﬁed zone • Individual volume control per zone • Zone 2-3-4 : 100 V • Zones 5 & 6 : 70 V for ‘silent areas’

• Removable rack ears included

MA246MR - TUNER & MEDIA PLAYER • 6-zone PA mixing ampliﬁer • Integrated digital FM/AM tuner - 10 presets • Media Player, plays MP3, WMA, CD USB memory stick slot & SD/MMC cards

MA246R - TUNER • 6-zone PA mixing ampliﬁer • Integrated digital tuner - 10 presets

MA246 - AMPLIFIER • 6-zone 100 Volts PA mixing ampliﬁer

Page 61

AMPS MIXING AMPS

MICPAT-6 - MICROPHONE • Selective 6-zone paging microphone. • Connect Up to 5 pcs MICPAT-6 on 1 MA246 • RJ45 connector for zone selection, EUROBLOCK for mic signal.

MICPAT-2 - MICROPHONE • With use of MICPAT2, MA246 allows you to merge zones into 2 major paging groups.

Page 62

AMPS MODULAR AMPS

MB150 - POWER • Compact modular mono ampliﬁer • RMS power : 150 Watts @ 4Ω, 170 Watts @ 2Ω • 100 Hz low cut and 0/180° phase switch • With build-in limiters & extended protection circuit • Dimensions: 140 (h) x 70 (w) x 335 (d) mm

SB160 - STEREO • Compact stereo modular ampliﬁer • RMS power : 2 x 80 Watts @ 4Ω • 100 Hz low cut and mono/stereo switch • With build-in limiters & extended protection circuit • Dimensions: 140 (h) x 70 (w) x 335 (d) mm

Page 63

AMPS MODULAR AMPS

MBR150 - POWER • Same as MB150, with some extra features : • Bass - treble tone control • Remote-power-on system via audio signal, 5-24V signal or on/ off switch • Remote volume control via up - down contact • Dimensions: 140 (h) x 70 (w) x 335 (d) mm

SBR160 - STEREO • Same as SB160, with some extra features : • Bass - treble tone control, balance • Remote-power-on system via audio signal, 5-24V signal or on/ off switch • Remote volume control via up - down contact • Dimensions: 140 (h) x 70 (w) x 335 (d) mm

Page 64

AMPS MODULAR AMPS

PAM7.2 - PRE-AMP • Modular stereo pre-ampliﬁer - mixer • 5 line, 2 mic inputs (phantom via internal switch) • 2 level priority (VOX: Mic 1 / contact: Mic 1-2) • Dimensions: 140 (h) x 70 (w) x 335 (d) mm

MEQ5.2 - EQUALISER • Modular 2 x 5 band equalizer • Adjustable low cut (20 - 300 Hz) & volume per channel • Balanced (XLR) & unbalanced (phono cinch) inputs & outputs • Dimensions: 140 (h) x 70 (w) x 335 (d) mm

DT-150 - TRANSFORMER • Dual channel 4Ω to 100/70/50 Volt transformer • 2 x 150 Watts or 2 x 80 Watts (via switch) • 2 x Hi-Q toroïdal transformers build-in • Suitable for MB(R)150 and SB(R)160 • Dimensions: 140 (h) x 70 (w) x 335 (d) mm

Page 65

AMPS MODULAR AMPS

QUADPACK - MULTICHANNEL • Reliable 100V Multi channel ampliﬁer • RMS power: 4 x 150 Watts in 100V • 100Hz low cut and 0/180° phase switch per channel • Each channel with build-in limiter & extended protection circuit • Comes with short AC power link cables • Dimensions: 176 (h) x 483 (w) x 360 (d) mm

SIXPACK - MATRIX • Reliable and powerful multi channel power ampliﬁer • RMS power: 12 x 80 Watts in 4 Ohm • Remote volume control via up-down contact • Bass – treble tone control and balance • Comes with short AC power link cables • Dimensions: 176 (h) x 483 (w) x 360 (d) mm

MB19 - HOUSING • Sturdy metal 19” housing for 1 to 6 modules • Dimensions: 176 (h) x 483 (w) x 340 (d) mm

MBBL - PANELS • Set of front and rear blanking panels for MB19 • Dimensions: 2 x 140 (h) x 70 (w) x 21 (d) mm

MBAC & SLAC - CABLE MBAC

SLAC

• Short 230V AC power-link cable

• Short 230V AC power cord

• Length: 350 mm

• Length: 650 mm

MBAC

Page 66

SLAC

Electronics

Syntec International Australia: Free Call 1800 648 628 | email: sales@syntec.com.au Syntec International New Zealand: Free Call 0800 100 755 | email: sales@syntec.co.nz

ELECTRONICS PREAMPS EQ’s

PM1122

- Stereo Pre-Amplifier

PM1122

INPUT - MICROPHONE SECTION

• High-grade electronics & engineering

• Nice LED’s for a clear overview

• 4-Level priority system with emergency input

• Built in chime (volume adjustable)

• 230 V to 24V DC adaptor & 19” brackets included

• Dimensions : 44 (h) x 433 (w) x 222 (d)

• 19” brackets included NTM-1 • Optional balanced microphone transformer

•Metal cover for MIC inputs and Zone 2 output included

• BB1

• BBi1

• BB2

• BBi2

• On and in-wall mounting boxes for the PM1122R & PM1122RL remote controls.

Page 68

ELECTRONICS PREAMPS EQ’s

W-BL

W-SLV

W-W

PM1122W-BL • PM1122W-SLV • PM1122W-W • Ultra ﬂat wireless wall control can be ﬁxed everywhere • Source selection – Mic mix volume – music volume control • Battery included, NO cables PM1122wR • Plug-in receiver module for RF wireless remote control panels • Makes multiple remote controls possible per zone • Optional with PM1122-INT

UTP CAT5

PM1122-INT - 2-ZONE DIGITAL REMOTE INTERFACE • Connection with PM1122 via UTP CAT5 cable per zone • SUB-D9 connector for RS232 control • Up to 64 presets programmable and accessible via RS232 • 2 x 6 presets direct accessible via contact closure • Clear LED status indication on front panel • PC software included

PM1122R ANALOG REMOTE CONTROL • Very affordable • Source select, Mic mix volume, Music volume

UTP CAT5

PM1122RL ANALOG REMOTE WITH LOCAL AUDIO CONTROL Same as PR1122R, but with additional; • Balanced MIC & line input via stereo mini jack • Level control & Tone control for local input • Easy wiring via standard UTP CAT5 cable

UTP CAT5

Page 69

ELECTRONICS PREAMPS EQ’s

ZONE 4

- 4 Zone Stereo Pre-Amplifier

ZONE 4

INPUT - MICROPHONE SECTION

• Perfect for multi-room and multi-zone

• 3 mono MIC/LINE inputs via Euroblock connector

• Easy-to-use controls and display per zone

• Tone, gain and level controls available

• Digital Control by RS-232, remote control panel, IR serial

• Every MIC input assignable to any of the 4 zones

• Priority input for paging or emergency

• Phantom power selectable on MIC 2 and 3

• Removable brackets included

• Paging : MIC1 mutes line input, MIC 2 + MIC 3 mix with line input

• Dimensions : 44 (h) x 419 (w) x 184 (d)

• Designed to work with MICPAT-4, four-zone paging microphone

MICPAT-4

- MICROPHONE SECTION

• Designed to operate plug and play with ZONE4 • Selective paging and “page ALL”

Page 70

ELECTRONICS PREAMPS EQ’s

ZONE 4R - REMOTE • Basic controls : easy to use ! source select • Status display • Music level and mic-mix level control+mute, source select • Sophisticated and yet affordable! • Easy to wire with UTP CAT5

• On- and in-wall mounting box for the ZONE4R remote control

• BBi1

• BB1 OUTPUT - SECTION • Line input selector per zone • Bass - Treble control per zone • Music level control per zone • Independent mic-mix level control per zone • Push to mute function for music and mic-mix per zone • Mono or stereo conﬁgurable

•Metal cover for MIC settings included

• 19” brackets included

RJ45SPLIT - CONNECT • RJ45 splitter : 1in, 4 out • to connect more MICPAT-4 or ZONE4R’s

Page 71

ELECTRONICS PREAMPS EQ’s

PIR7600

- PRE-AMPLIFIER

• Remote controlled stereo pre-ampliﬁer mixer

• Transfers IR signal of other devices

• 6 Line, 2 mic inputs (MIC1: mic/line/tel. switch)

• Dimensions: 44 (h) x 483 (w) x 275 (d) mm

• 2 Stereo output zones • IR or wired (RJ45) remote control

PIR-REM (Included)

PM7400MKII

PIR-EMIT (Included)

PIR-REC (Included)

- PRE-AMPLIFIER

• Versatile stereo Mic-Line pre-ampliﬁer mixer

• Independant tone control for mic & line inputs

• 6 Line, 2 mic inputs (VOX mute on MIC 1)

• Easy to use

• 2 stereo outputs

• Dimensions: 44 (h) x 483 (w) x 275 (d) mm

Page 72

ELECTRONICS PREAMPS EQ’s

AUDIOLOCK

- LEVEL CONTROL

• Automatic Level Controller: a pre-adjusted maximum SPL can not be exceeded • Protects not only your loudspeakers but also your license • No more broken woofers and tweeters • Connected between the output of the mixer/pre-ampliﬁer and the input of the power ampliﬁer • Unit can be sealed with included numbered seals

LOCK-KEY

- REMOTE

• Remote control unit for level adjustment of the AUDIOLOCK • The manager is always in control; not the DJ • With A/B level switch • In a metal housing with key-lock

PXQ2215

- EQUALIZER / X-OVER

• Professional stereo equalizer / X-over

• X-over: 20 - 300 Hz adjustable

• Equalizer : 2 x 15 bands, 2/3 octave

• 24dB / octave Linkwitz Riley

• Bypass & 6/12dB switch for L & R on frontpanel

• Dimensions: 44 (h) x 483 (w) x 280 (d) mm

Page 73

ELECTRONICS MUSIC DEVICES

BGM3000

- TUNER & PLAYER

• 19” brackets included

• FM Tuner & CD/MP3/USB memory player • 10-preset FM tuner with Mono/Stereo switch at the back • Long-life professional CD with anti-shock system • Two USB slots : front + rear • Combi output : switches automatically to tuner output when recorded music ends • Slimline 19” with two detachable brackets IR remote control included, for CD / MP3 section.

PR1000

- TUNER

• Professional 19” AM/FM digital tuner • Automatic scan up-down function, 10 presets • Remote control via IR or contact closure • With output volume attenuator on rear panel • Comes with IR handheld remote, FM antenna ground isolator, AM/FM indoor antenna

Ground isolator

• Dimensions: 44 (h) x 483 (w) x 280 (d) mm IR handheld remote control

Page 74

ELECTRONICS MUSIC DEVICES

PR4000

• • • • • • • •

IR handheld remote control - QUAD RDS TUNER

Professional 19” quad FM tuner Automatic scan up-down function, 10 presets per tuner Remote control via included handheld IR remote control IR input jack to receive external control data Build-in output volume attenuator per tuner on rear panel Comes with build-in antenna ground isolator Detachable 19” brackets included Dimensions: 44 (h) x 483 (w) x 280 (d) mm

PR1000R

IR handheld remote control - RDS TUNER

• Professional 19” AM/FM RDS tuner • RS232 and infrared control • Isolated FM-antenna buffer • Comes with IR handheld remote and FM antenna • Output attenuator on rear panel • Dimensions: 44(h) x 483 (w) x 280 (d) mm

PR4000R

• • • • • •

• 19” brackets included IR handheld remote control

- RDS TUNER

Four independent FM-RDS tuners in one 19” unit RS232 and infrared control Improved reception by DSP-technology Comes with IR handheld remote and FM antenna 4 output attenuators on rear panel Dimensions: 44(h) x 483 (w) x 280 (d) mm

• 19” brackets included

Both the PR1000R (single tuner) and PR4000R (quad tuner) now have RDS data available via the RS232 serial port. A huge added value for your (residential) projects!

Page 75

ELECTRONICS MUSIC DEVICES

PCR3000R

• • • • • •

DAB - RDS FM tuner + CD player + MP3 from CD, SD-card or USB memory stick New technology guarantees perfect radio reception, both with DAB and FM RS232 and IR remote control (includeed) Combined and individual output with gain control for tuner and CD/MP3 section Coaxial and optical digital audio output for CD section Dimensions : 44 (h) x 483 (w) x 280 (d) mm

PC1000R

• • • • • •

- TUNER & MEDIA PLAYER

- MEDIA PLAYER

CD player and MP3 from CD, SD-card or USB memory stick RS232 and IR remote control (included) Coaxial and optical digital audio output XLR balanced and RCA audio outputs Double USB and SD slots (front and back) Dimensions : 44 (h) x 483 (w) x 280 (d) mm

PCD-REM

- REMOTE CONTROL

• Optional IR remote control enables DVD functionality on PCR3000R and PC1000R • Dimensions: 196 (h) x 48 (w) x 14 (d) mm

Page 76

ELECTRONICS MUSIC DEVICES

CDR-882

- PROFESSIONAL DUAL DRIVE CD RECORDER

• Genuine dual recording drive conﬁguration supporting ‘DiscSpan’ seamless extended recording time across 2 or more discs, simultaneous ‘DualBurn’ recording of 2 discs, and high speed duplication

• Internal SRC accepts digital inputs from 32 to 96kHz • External word clock input • RS232 remote control

• Ground-up design using audiophile circuitry for uncompromised sonic performance

• Parallel control interface

• High-quality IDE CD-R drives deliver low error recording

• Gapless track increments

• Robust, heavy-duty construction ensures reliable CD recording, even in unfavourable environments

• High-resolution metering

• Supports all CD-R media

• 2U rack mounting chassis

• Infra-red remote control

• CD-Text support

• Balanced and unbalanced analog I/O • AES/EBU and S/PDIF (coaxial and optical) digital I/O • Full 24-bit A/D and D/A conversion with dither • Stable, quartz crystal-derived internal clock

Page 77

ELECTRONICS MUSIC DEVICES

CDR-882

- CONNECTVITY

The CDR-882 features comprehensive professional connectivity including balanced XLR analog I/O, unbalanced Phono/RCA analog I/O, balanced XLR AES/EBU digital I/O, coaxial and optical S/PDIF digital I/O, external word clock input, RS232 remote control and parallel control interface. AES/EBU digital I/O

Coaxial S/PDIF digital I/O

Balanced analog outputs

Unbalanced analog I/O

Optical S/PDIF digital I/O

Balanced analog inputs

Word clock input

Parallel remote

PS2 keyboard

RS232 serial control

Multimachine RS232 link input and output

THE ULTIMATE CD RECORDER

The HHB CDR-882 is a dual drive CD recorder designed from the ground up for uncompromised professional performance. With ‘DiscSpan’ seamless extended recording across two or more discs, simultaneous ‘DualBurn’ recording of two discs, and high speed duplication, the CDR-882 is equipped for a wide range of professional applications including live sound recording, plus use in houses of worship. AUDIOPHILE CIRCUIT DESIGN FOR HIGH-END SONIC PERFORMANCE

The CDR-882 features full 24-bit A/D and D/A converters and a high-quality quartz crystalderived internal clock. Unlike inferior CD recorders, the CDR-882 dithers the 24-bit A/D sample to the 16-bit CD format. Audiophile-grade analog circuitry also plays a key role in ensuring superior sonic performance. TOUGH, PROFESSIONAL BUILD QUALITY

The pursuit of excellence continues in the area of build quality, with the CDR-882 weighing in at 6.7kg / 14.7lbs. High quality IDE CD-R drives are mounted in a massive steel chassis to ensure reliable, glitch-free recording, even in unfavourable environments including live concerts where ambient noise levels can be particularly high. Custom drive ﬁrmware ensures seamless track increments and full compatibility with CD Text. WIDESPREAD MEDIA COMPATIBILITY

The CDR-882 is compatible with a huge range of CD-R media (including data discs), both low and high speed up to 52X, enabling high-speed duplication from one drive to the other at speeds limited only by the media being used. COMPREHENSIVE FEATURE SET

A full complement of professional features equips the CDR-882 for a wide variety of pro CD recording and replay applications. Track IDs may be manually created, or auto-generated from the digital input, audio level threshold or time period, both user deﬁnable. DiscSpan mode overcomes the 80 minute limit of CD recording, by extending the recording across multiple discs. Tracks IDs are inserted when the next disc starts and when user-definable fade out and fade in start and finish. With an overlap between the two discs, the whole program can either be played back uninterrupted in the CDR-882, or easily reconstructed in a DAW using the track IDs to precisely align the audio from the two or more discs. DualBurn mode records two discs simultaneously producing two identical discs ideal for redundant or client copies. Up to four recorders (ie eight drives) may be linked together producing 640 minutes of uninterrupted recording. The CDR-882 supports CD Text, and uses it to identify multi-disc recordings and the correct order. The versatility of the CDR-882 is enhanced further by the inclusion of Sync Record and Disc Copy modes, plus a Program mode to enable selective track record/replay.

Page 78

ELECTRONICS MUSIC DEVICES

CDR-882

- TECHNICAL DATA

TECH BRIEF

DISCSPAN

Frequency Response S/N Ratio THD+N Channel Separation Max Input Level

5-20kHz ±0.5dB 96dB (16-bit limit) 0.004% (16-bit limit) >90dB 24dBu (XLR) 10dBu (RCA/Phono)

Output level (0dBFS)

22dBu (XLR) 8dBu (RCA/Phono) >10k� (balanced) >5k� (unbalanced) <50� 1/4” stereo jack AES/EBU 110� XLR S/PDIF 75� RCA/Phono coaxial S/PDIF TOSlink optical 44.1kHz - 75� BNC with switchable termination 32-96kHz via sample-rate converter 44.1kHz Infra-red RS232 9-pin opto-isolated parallel CD audio recordable CD (playback); CD-R; CD-RW 100-240V 50/60Hz 25W (nominal) 6.7kg/14.7lbs 95mm (3.75 inches) 88mm (3.5 inches) 322mm (12.5 inches) – excluding connectors 482mm (19 inches) Remote control 2 x AA batteries Power cord Operating instructions 2 x HHB CDR80HS recordable CD

Input Impedance Output Impedance Headphone Output Digital I/O Word Clock Input Digital Input Digital Output Remote Control Format Compatible Media Power Supply Power Consumption Weight (Ex Packaging) Height with feet Height without feet Depth Width Supplied Accessories

DiscSpan mode overcomes the 80 minute limit of CD recording by extending the recording across multiple discs.DiscSpan allows the user to set overlap and fade in/out durations when switching between discs with Track IDs automatically written to each disc to mark the transition. On playback the CDR-882 uses these Track IDs to provide uninterrupted programme audio. In addition the Track IDs provide precise reference markers when reconstructing the recording in a DAW.

APPLICATIONS • Music recording

• Night clubs

• Broadcast facilities

• Security logging systems

• Theatres • Houses of worship • OB vehicles • Broadcast output logging • CD duplication • Education • Custom AV installations

Page 79

ELECTRONICS MUSIC DEVICES

UDP-89

- PROFESSIONAL UNIVERSAL DVD/CD PLAYER

• Fully professional, multi-format disc player • Plays CD, CD-Video, SACD, DVD-Video, and DVD-Audio

• Full 24-bit/192kHz Wolfson DACs for uncompromised audio performance

• Plays mp3 and MPEG4 .avi ﬁles

• 14-bit 165MHz video DACs

• Audiophile sound quality

• Rugged build quality for dependable use in demanding professional applications

• Broadcast-quality video performance • Built-in preamp with volume control for direct connection to active 5.1 speaker systems

• Professional cueing function • RS232 and parallel remote control

• Dolby™ Digital and DTS decoding

• Touchscreen interface via RS232

• MPEG audio decoding

• Infra-red remote control (supplied)

• Composite, S-Video, Component, RGB and HDMI video outputs

• Volume controllable via remote • 1U rack mounting chassis

• Balanced analog audio outputs: L/R via XLR; L/R and 6 channel surround via 25-pin D-type • Unbalanced analog audio outputs: L/R plus discrete 6 channel surround via RCA/phonos • AES/EBU and S/PDIF (coax and optical) digital audio and bitstream outputs

THE ULTIMATE UNIVERSAL DVD/CD PLAYER DVD playback is an ever expanding requirement in virtually every type of AV installation, from broadcast facilities and boardroom presentations to public information displays and entertainment systems.

The HHB UDP-89 is designed to provide the system integrator with a highly robust, ﬂexible and professionally speciﬁed alternative to the consumer players that have previously been pressed into service. The UDP-89 is a universal DVD/CD player that delivers broadcast-quality video and audio playback and has a host of professional interfacing features that make it ideal for use in a wide variety of mobile and fixed installations. IF IT’S ON A DISC, CHANCES ARE THE UDP-89 WILL PLAY IT

By making the UDP-89 compatible with a huge array of disc and ﬁle formats, HHB has effectively removed the limitations imposed by conventional devices to produce a truly universal player. CD, CD-R, CD-RW, CD-Video, SACD, DVD-Video, DVD-Audio, DVD-R, DVD+R, DVD-RW and DVD+RW are all supported, and mp3 audio and MPEG4 .avi video ﬁles can also be played. UNCOMPROMISED DESIGN FOR REFERENCE AUDIO AND VIDEO PERFORMANCE

The UDP-89 delivers the ultimate in DVD video quality via its HDCP-compliant HDMI output, six 14-bit 165MHz video DACs providing progressive scan 480p/576p, plus upscaling to 720p and 1080i (available from both HDMI and component outputs). Unlike the majority of DVD players in which audio is so often the poor partner, the UDP-89 features Wolfson 24-bit/192kHz audio DACs and high-end analog circuitry for audiophile performance. And the UDP-89 is the only DVD player available with stereo and 5.1 balanced audio outputs to get the very best from high-resolution SACD and DVD-Audio formats.

Page 80

ELECTRONICS MUSIC DEVICES

UDP-89

- OUTPUTS

Video/graphics - five outputs: Composite, CVBS, S-Video, HDMI, Component/RGB Stereo audio - seven outputs: Balanced x 2, Unbalanced x 2, AES/EBU, S/PDIF optical, S/PDIF coax RS232

Balanced analog stereo and 5.1 surround

Parallel remote

Balanced analog stereo

Surround 5.1 audio - two outputs: Balanced and Unbalanced Dolby Digital/DTS encoded surround - two outputs: S/PDIF optical and coax

CVBS (Composite)

Unbalanced analog stereo and 5.1 surround

AES/EBU stereo

HDMI

Composite

Component/RGB S-Video

Universal power supply 100V - 240V

S/PDIF optical and coax stereo and Dolby Digital/ DTS bitstreams

TOUGH, PROFESSIONAL BUILD QUALITY

Deﬁnitely not based on a consumer device, the UDP-89 is designed and built from the ground up for demanding professional use. The rugged, rack-mounting chassis houses a pro-grade disc drive comprising of a durable disc loader with a smooth, positive action, and a high-performance laser assembly, extensively tested for dependable, long-term use. COMPREHENSIVE FEATURE SET

A complete set of professional audio and video outputs (see above) and a full complement of professional features equip the UDP-89 for use in almost any audio or video disc playing application. The A-B repeat mode makes the UDP-89 ideal for use in ﬁxed installations, while professional cueing functions and RS232 control with touchscreen implementation are essential features that make it ideal as the heart of an interactive display. ON-BOARD AUDIO PREAMP

The inclusion of a multichannel preampliﬁer makes it possible to connect the UDP-89 directly to an active 5.1 speaker system, with versatility and convenience enhanced yet further by the inclusion of a volume control which can also be controlled remotely via RS232 or the supplied infra-red remote control. And wherever space is at a premium, users will appreciate that the UDP-89 can be securely mounted in just 1U of rack space.

Page 81

ELECTRONICS MUSIC DEVICES

UDP-89

- TECHNICAL DATA

TECH BRIEF UDP-89TECHNICAL DATA Video Output Formats Composite Video S-Video Component Video Y: 1V p-p, 75� Audio Performance Frequency Response THD+N Channel Separation Output level (0dBFS) Output Impedance Headphone Output Digital Output

Remote Control General Display Languages Power Supply Power Consumption Weight (Ex Packaging) Dimensions Height Depth incl. connectors Width Supplied Accessories

PAL: 1080i, 720p, 576p, 576i NTSC: 1080i, 720p, 480p, 480i 1V p-p, 75� Y: 1V p-p, 75� C: 0.3V p-p, 75�(Europe) C: 0.286V p-p, 75�(USA) Pb: 0.7V p-p, 75� Pr: 0.7V p-p, 75� 10Hz-20kHz ±0.5dB S/N Ratio 96dB 0.005% >90dB 22dBu (XLR) 8dBu (RCA/Phono) <50� 1/4” stereo jack AES/EBU 110�XLR S/PDIF RCA/Phono coaxial 0.5V p-p, 75� S/PDIF TOSlink optical Infra-red RS232 (will be made available) 9-pin opto-isolated parallel English, French, Spanish German, Italian 100-240V 50/60Hz 25W 4.3kg/9.4lbs 44mm (1.75 inches) 343mm (13.5 inches) 482mm (19 inches) RC89 Remote control 2 x AAA batteries Power cord Operating instructions

Page 82

ELECTRONICS CONTROLLERS

CONTROL

EURO SERIES

Fig1

MODEL

E-VOL120

Fig2

100Volt

Stereo

24V Priority

•

E-VOLST

CONTROL

•

Power

Steps

H W (mm) (mm)

D E-MOD E-MOD (mm) IN ON

Fig

120W

•

2x40W @ 4Ω

•

MULTI-CHANNEL SERIES

SVC-4 • Volume control in 4 stereo zone • Control up to 8 pieces of 16Ω loudspeakers on a standard 4Ω HiFi ampliﬁer

• 19-VOL660 / 19-VOL6120 • Volume control in 6 100 Volt zones

Page 83

ELECTRONICS ACCESSORIES

BACK BOXES

IN WALL

BUILT-IN BOXES • CMS5BBI : CMS508/CMS15T • CMS6BBI : CMS608/CMS20T • CMR4BBI : for CMR15T • CMRQ108BBI : for CMRQ108 • CMRQ108CBBI : for CMRQ108C

CABLES

ACCESSORIES

Amazing how these little accessories can save you a lot of time, ... and money! No more soldering and improvising because you can’t ﬁnd the right cable / connector! Here is a series of cables tat did not even exist previously - produced by APart especially with installers’ ease in mind.

• CE2E2 : euroblock2 - euroblock2 • CE3E3 : euroblock3 - euroblock3 • CE3XM : euroblock3 - XLR3 male • CE3RY : euroblock3 - RCA cinch stereo • CRYRY : RCA - RCA cinch stereo • CXFXM : XLR3 female - XLR3 female • CXFRY : XLR3 female - RCA cinch stereo

All cables are 1,5m long and supplied in plastic POS bags.

Page 84

Microphones

Syntec International Australia: Free Call 1800 648 628 | email: sales@syntec.com.au Syntec International New Zealand: Free Call 0800 100 755 | email: sales@syntec.co.nz

MICROPHONES PAGING

MICROPHONE

MICPAT-D

• Robust table type, dynamic microphone • Clear voice, no feedback • Toggle switch: Talk - Off - Continuous talk • No batteries, no power supply required • With 3m cable and DIN5 connector

MICROPHONE

MICPAT-2

• Robust 2-zone table type, dynamic microphone • Push-to-talk button per zone with LED indication • No batteries, no power supply required • Perfect ﬁt to APart Concept1 • With 5m cable, open wire

MICROPHONE

MICPAT-6

• Selective 6-zone paging microphone. • Connect Up to 5 pcs MICPAT-6 on 1 MA246 • RJ45 connector for zone selection, EUROBLOCK for mic signal.

MICROPHONE

MICPAT-CD

• Sturdy CB type dynamic paging microphone • Ideal for close talking • On/off by pressing the non-latching switch • DIN5 connector (D) or XLR-5 (X) • Wall mount included

• DIN5 connector (D) • XLR5 connector (X)

Page 86

MICROPHONES INSTALLED

INSTALLED SOUND Installed Sound. Sennheiser’s installed sound product line consists of three versatile back pre-polarized condenser microphone heads which can be combined with various goosenecks, ceiling and table mounts. They are suitable for a wide range of applications, including conference, public address, studio, broadcast, houses of worship, and television production.

ME 34 High sound quality and low equivalent noise level are the features of this cardioid microphone head. The rugged, matte black metal housing has a special anti-reﬂection coating. Also available as ME 34 Nx in nonreﬂective Nextel® grey. Frequency Response: . . . . . 40 – 20,000 Hz

ME 35 Similar to ME 34, however, this microphone has a super-cardioid pick-up pattern for greater rejection of ambient sounds. Frequency Response: . . . . . 50 – 20,000 Hz

ME 36 The ME 36 microphone head features a super-cardioid/lobar pick-up pattern with excellent directivity and maximum rejection of unwanted sounds. Its superior sound quality and high gain before feedback is matched by a low equivalent noise level. The durable, matte black or Nextel metal housing has a special anti-reﬂection coating. Frequency Response: . . . . . 40 – 20,000 Hz

MZH 30 42 / MZH 3042 L Metal gooseneck with two flexible sections for the ME 34, ME 35 and ME 36 microphone heads. The rugged matte black gooseneck is fitted with a balanced, floating XLR-3 output, enabling the microphone to be powered from 12–48 V phantom power. Also available as MZH 3042 L with red LED ring and XLR-5 connector. Also avialable as MZH 3042 Nx in Nextel® grey. Length: 16 in. Also available as MZH 3015 length 15cm, MZH 3062 length 60cm, and MZH 3072 length 70cm.

Page 87

MICROPHONES INSTALLED

MZTX 30 L Table stand with XLR-5 connector for use with MZH 3015 L, MZH 3040 L, and MZH 3042 L goosenecks.

MZS 31 Shock-mount for the MZH goosenecks.

MZT 30 Shock-mount for the MZH goosenecks.

MZBD 36 Boundary microphone adapter.

MZH 30 Ceiling mount.

MZC 30 Kevlar-reinforced cable spool with integrated pre-amp. Length: 29.5 ft.

MZFS 30 / MZFS 60 / MZFS 80 Floor stands for the MZH 3015, MHZ 3040 and MZH 3042 goosenecks. Available heights: 11.8, 23.6 and 31.5 inches. Can be converted to wireless operation using an SKP 500 g plug-on transmitter. Also available as MZFS 30 Nx, MZFS 60 Nx, and MZFS 80 Nx in Nextel® grey.

Page 88

MICROPHONES WIRED

e 825 S Multi-purpose vocal and construction with on/off unbeatable price. Frequency Response: Nominal Impedance: . .

instrument microphone. Full metal switch – Sennheiser quality at an . . . . . . . 350 O

. 80 – 15,000 Hz

e 835 High-quality vocal microphone. Cardioid pick-up pattern for good feedback rejection and uniform on and off-axis response. Also available as e 835 S with noiseless on/off switch. Frequency Response: . . . . . 40 – 16,000 Hz Nominal Impedance: . . . . . 350 O

e 840 Professional cardioid vocal microphone developed to cut through high on-stage levels. Rugged, durable construction, insensitive to handling noise. The e 840 efficiently suppresses sounds emanating from outside its pick-up angle, and is fitted with a hum compensating coil for reducing electromagnetic interference. Also available as e 840 S with noiseless on/off switch. Frequency Response: . . . . . 40 – 18,000 Hz Nominal Impedance: . . . . . 350 O

e 845 High performance super-cardioid vocal microphone with exceptional feedback rejection. Ensures vocal projection through high on-stage sound levels . Also available as e 845 S with noiseless on/off switch. Frequency Response: . . . . . 40 – 16,000 Hz Nominal Impedance: . . . . . 350 O

e 865 The highlight of evolution 800 Series stage microphones. Rugged condenser mic that cuts easily through high onstage levels. Full, precise sound, especially in the treble. Also available as e 865 S with noiseless on/off switch. Frequency Response: . . . . . 40 – 20,000 Hz Nominal Impedance: . . . . . 200 O

Page 89

MICROPHONES WIRELESS

FREEPORT WIRELESS WIRELESS - TO START WITH

Everything you really need to perform pretty much anywhere you want. Easy to use wireless technology. Utterly reliable transmission. Quality at a price you don’t even have to think about. Sennheiser’s freeport offers a robust wireless system which is technically state-of-the-art and totally uncomplicated. You don’t need to be a wireless-expert to set it up and use it; just pop in the batteries, connect the receiver and switch it on! That’s all there is to it. Each of the four UHF channels transmitting sound to the receiver can be switched on at the turn of a knob. There’s never any risk of frequency jamming. That means you can easily use four freeport systems at the same time! Freeport is perfect for singers, bands, and presenters who count on the reliability and quality of Sennheiser’s UHF transmission technology. Dynamic processors provide a clear and natural sound. That’s how freeport prepares you for the biggest stages in the world. With technology which is already which is already accepted as standard there. EASY TO USE • 4 CHANNELS • NICE PRICE • CLEAR AND NATURAL SOUND

And by the way - freeport is licence-free in many countries!

VOCAL SET

INSTRUMENT SET

PRESENTATION SET

Crystal-clear, cut-through sound is produced by the handheld transmitter with dynamic capsule, which fits comfortably in the hand. This Vocal Set also includes a diversity receiver.

Highly robust with excellent sound and dynamics! The set consists of a bodypack transmitter with guitar cable and receiver. It is well-suited to guitars and all other instruments with 1/4” (6.3mm) jack plug.

Absolute sound clarity for speeches, presentations, and theatre performances is guaranteed. The set consists of a bodypack transmitter, a clip-on, omni-directional microphone, and a receiver. The microphone can be easily and discreetly worn.

Handheld transmitter • Dynamic caroid transducer • Frequency response: 80-80,000 Hz • Battery power LED

Bodypack Transmitter • Frequency response: 60-18,000 Hz • MIC/LINE • Battery power LED

Receiver

• Diversity technology

Guitar Cable

Clip-on microphone

• S/N ratio: > 95 dB(A)

• Natural sound

• THD: < 1%

• Almost invisible

Page 90

MICROPHONES WIRELESS

G3 100 SERIES Gone are the days when a singer had to shout into the microphone to be heard over the drums and instruments. The vocal set of the 100 series is absolutely reliable, placing every lead singer exactly where he is supposed to be: right in front! In the process, the microphone delivers the full, ﬁrst-rate live sound that Sennheiser is known for. You can choose from two dynamic and one condenser microphone heads from the renowned evolution 800 microphone series.

ew 135

ew 145 SKM 100-845 handheld transmitter with supercardioid dynamic head with EM 100 true diversity receiver, MZQ 1 microphone clamp

SKM 100-835 handheld transmitter with cardioid dynamic head with EM 100 true diversity receiver, MZQ 1 microphone clamp

Regardless of whether singer, dancer, or ﬁtness trainer—those who want to move across the entire stage while keeping their hands free during a performance will love the G3 headset. On the one hand, the condenser headset microphone is ultralight— so light, in fact, that you will forget you are wearing it during the show. And on the other, it supplies a powerful sound, enabling it to reach the very last row in crystal-clear quality.

ew 165

ew 152

SKM 100-865 handheld transmitter with supercardioid condenser head with EM 100 true diversity receiver, MZQ 1 microphone clamp

ME 3-ew directional headset microphone with SK 100 bodypack transmitter, and EM 100 true diversity receiver

Page 91

MICROPHONES WIRELESS

The G3 presentation set offers a professional quality standard that has proved itself in TV studios and on large stages alike. For conference facilities and presentations, the lecturer can also be heard well, even in the very last row, without having to speak louder. The small clip-on microphone is nearly invisible. Once attached to the ﬂexible bodypack transmitter, the cable disappears discreetly under clothing.

ew 112

ew 122

ME 2 clip-on microphone (omnidirectional) with SK 100 bodypack transmitter and EM 100 true diversity receiver

ME 4 clip-on microphone (cardioid directional) with SK 100 bodypack transmitter and EM 100 true diversity receiver

TECH BRIEF

SYSTEM EW 100

Modulation Frequency ranges Transmission/receiving frequencies Switching bandwidth Noise reduction system AF frequency response S/N ratio (at 1 mV and peak deviation) THD (at nominal deviation and 1 kHz)

wideband FM 516–558, 566–608, 626–668, 734–776, 780–822, 823–865 20 channel banks, 1 fixed bank, 12 factory preset channels each 42 MHz Sennheiser HDX 25–18.000 Hz ≥ 110 dBA ≤ 0,9%

RECEIVERS

EM 100

EK 100

Receiver principle Sensitivity (with HDX, peak deviation) Adjacent channel rejection Intermodulation attenuation Blocking Pilot-tone squelch Antenna inputs

true diversity < 2.5 µV at 52 dBAeff S/N ≥ 65 dB ≥ 65 dB ≥ 70 dB detachable 2 BNC sockets 1/4” (6.3 mm) jack socket, unbalanced: +12 dBu XLR socket, balanced: +18 dBu

diversity < 2.5 µV at 52 dBAeff S/N ≥ 65 dB ≥ 65 dB ≥ 70 dB detachable

12 V DC 190 x 212 x 43 mm approx. 900 g

2 AA batteries, 1.5 V approx. 82 x 64 x 24 mm / 3.23” x 2.52” x 0.94” approx. 160 g (incl. batteries) typ. 8 h

AF output voltage (at peak deviation, 1 kHz AF) Power supply Dimensions Weight Operation time

Page 92

3.5 mm jack socket, unbalanced: +12 dBu

MICROPHONES WIRELESS

G3 300 SERIES High-class design, brilliant sound—the evolution wireless G3 vocal set enables you to present speakers, presenters, singers, or actors perfectly. The microphone not only transmits strong voices clearly, it also picks up the soft tones with a high degree of expertise. A range of selectable microphone heads makes the G3 vocal set a highly ﬂexible device that can be used on any stage—regardless of whether a professional or an amateur is speaking.

ew 335

ew 345

SKM 300-835 hand-held transmitter with cardioid dynamic head with EM 300 true diversity receiver, GA 3 rack mount, and MZQ 1 microphone clamp

SKM 300-845 hand-held transmitter with super-cardioid dynamic head with EM 300 true diversity receiver, GA 3 rack mount, and MZQ 1 microphone clamp

ew 365 SKM 300-865 hand-held transmitter with supercardioid condenser head with EM 300 true diversity receiver, GA 3 rack mount, and MZQ 1 microphone clamp

The evolution wireless G3 headset is the ideal solution for capturing rousing stage situations with grand gestures. As a performer you have the entire breadth of the stage at your disposal—and even your hands are free, giving you greater scope to speak, dance, and act. The headset can be worn inconspicuously, the bodypack transmitter can be attached practically invisibly to garments, and the con-necting wire from the headset to the transmitter can be concealed under clothing. The headset shows the full extent of its professionalism in complex live situations. A special frequency response renders the microphone insensitive to ambient stage noise and popping sounds, allowing even those sitting in the back rows to experience a clean, powerful sound.

Page 93

MICROPHONES WIRELESS

Presentations, lectures, and narratives are challenges in themselves. The evolution wireless G3 presentation set helps you master them with professional, crystal-clear sound transmission that the audience will beneﬁt from—all the way to the back row. The practically invisible, extremely small clip-on microphone can be simply attached to a garment or a tie. The highly compact bodypack transmitter can also be attached almost invisibly to the wearer’s clothing. This type of equipment gives you the freedom to make full use of the many ways of delivering a presentation, even well away from the lectern. An interesting point for sound engineers: If required, the clip-on microphone is available either with the ME 2 with omni-directional pick-up pattern or the ME 4 (cardioid).

ew 352

ew 312

SK 300 bodypack transmitter with EM 300 true diversity receiver, GA 3 rack adapter, and ME 3-ew headset microphone

SK 300 body-pack transmitter with ME 2 clip-on microphone (omnidirectional), EM 300 true diversity receiver, and GA 3 rack adapter

ew 322

TECH BRIEF

SK 300 body-pack transmitter with ME 4 clip-on microphone (cardioid), EM 300 true diversity receiver, and GA 3 rack adapter

wideband FM 516–558, 566–608, 626–668, 734–776, 780–822, 823–865 20 channel banks, 1 fixed bank, 12 factory preset channels each 42 MHz Sennheiser HDX 25–18.000 Hz ≥ 115 dBA ≤ 0,9%

RECEIVERS

EM 300©

Receiver principle Sensitivity (with HDX, peak deviation) Adjacent channel rejection Intermodulation attenuation Blocking Pilot-tone squelch Antenna inputs

true diversity < 2 µV at 52 dBAeff S/N ≥ 75 dB ≥ 70 dB ≥ 75 dB detachable 4 BNC sockets 1/4” (6.3 mm) jack socket, unbalanced: +12 dBu XLR socket, balanced: +18 dBu

AF output voltage (at peak deviation, 1 kHz AF) Power supply Dimensions Weight Operation time

Page 94

12 V DC 202 x 212 x 43 mm approx. 980 g

MICROPHONES WIRELESS

G3 500 SERIES Lends strong voices a strong sound—the 500 series vocal set ensures brilliant sound, even during quiet sections. This means that professional soul and rock voices sound as perfectly nuanced as classical singing voices. Experienced sound engineers rely on this set, especially for large stages and unusual live events. Professionals can select from three different microphone heads with cardioid and super-cardioid directional patterns.

ew 500-935

ew 500-945

SKM 500-935 handheld transmitter with cardioid dynamic head, with EM 500 true diversity receiver, GA 3 rack mount, and MZQ 1 microphone clamp

SKM 500-945 handheld transmitter with cardioid dynamic head, with EM 500 true diversity receiver, GA 3 rack mount, and MZQ 1 microphone clamp

These days, successful presentations depend on many factors. One of the most important: absolutely reliable sound transmission. The G3 Presentation Set offers the professional quality standard demanded by TV studios and on large stages. Presenters and lecturers can move freely – and due to the special frequency response of the professional clip-on microphone, their voices can even be heard in the very last rows. Connected to the ﬂexible bodypack transmitter, the cable is hidden discreetly under the clothing.

ew 500-965

ew 512

SKM 500-965 hand-held transmitter, switchable polar patterns: cardioid/supercardioid true condenser, dual large diaphragm, with EM 500 true diversity receiver, GA 3 rack mount, and MZQ 1 microphone clamp

MKE 2 clip-on microphone, omnidirectional, EM 500 true diversity receiver, SK 500 bodypack transmitter, and GA 3 rack mount

Page 95

Conferencing & Communications

Syntec International Australia: Free Call 1800 648 628 | email: sales@syntec.com.au Syntec International New Zealand: Free Call 0800 100 755 | email: sales@syntec.co.nz

CONFERENCING & COMMUNICATIONS WIRED SYSTEMS

PA-CONF

MICROPHONE SYSTEM

PA-CONF • IR controlled microphone pre-ampliﬁer mixer • Inputs : conference, mic/line, line • Up to 30 microphone terminals via daisy chaining • With build in DSP automatic feedback controller • Dimensions: 44 (h) x 483 (w) x 280 (d) mm

(Included)

PA-CONF • PA-CONFCI • Design & solid table type or ﬂush mount chairman microphone terminal • Equipped with “SPEECH” and “PRIORITY” button • Hi-Quality 470 mm uni-directional cardioid mic with LED ring included • With build-in limiter. 12 m stereo jack cable included • Dim. PA-CONFC : 40 (h) x 120 (w) x 154 (d) mm (Fig. 1) • Dim. PA-CONFCI : 62 (I) x 142 (w) x 125 (d) mm (Fig. 2) Fig. 1

Fig. 2

PA-CONFD • PA-CONFDI • Design & solid table type or ﬂush mount delegate microphone terminal • Equipped with “SPEECH” button • Hi-Quality 470 mm uni-directional cardioid mic with LED ring included • With build-in limiter. 2 m stereo jack cable included • Dim. PACONFD : 40 (h) x 120 (w) x 154 (d) mm (Fig. 3) • Dim. PAFONFDI : 62(I) x 142 (w) x 125 (d) mm (Fig. 4) Fig. 3

Page 97

Fig. 4

CONFERENCING & COMMUNICATIONS WIRED SYSTEMS

PACONF - SET • Needs to be powered by a PA-CONF microphone system (not included) • Dimensions ﬂight case: 170 (h) x 560 (w) x 290 (d) mm

Page 98

CONFERENCING & COMMUNICATIONS WIRED SYSTEMS

CONFERENCE SYSTEMS SDC Digital Conference and Interpretation System. The premier conference solution that uses the beneﬁts and performance of digital communication management. Extremely ﬂexible and readily expandable, SDC 8200 is an ideal choice for any conference and interpretation application, from small conferences to large congresses.

SDC 8200 D The basic version of the SDC delegate unat features a gooseneck microphone, built-in loudspeaker, headphone socket, MIC key and LED status display. Three voting keys allowing electronic voting: Yes, Abstain, No. Also available as SDC 8200 C chairman’s unit.

SDC 8200 DC This delegate unit accomodates up to two users and features two separate headphone sockets with volume controls and channel selection keys for listening to different language channels. Three voting keys allowing electronic voting: Yes, Abstain, No. Also available as SDC 8200 CC chairman’s unit.

SDC 8200 DV This delegate unit for one user, features five voting keys, a slot for the personal identification chip card, plus a graphical display unit for messages and voting result display. Also available as SDC 8200 CV chairman’s unit.

SDC 8200 ID The interpreter unit has been designed according to international ISO standards. It comes with a headphone socket, volume and tone controls, display, A/B output channel selection and three relay-preset keys for selection of incoming languages.

SDC 8200 CU At the heart of every system: The central unit provides for up to 120 delegate units. It features a host of control functions and the connections required for the delegate units, additional audio sources, monitoring headphones, interpretation management of up to 28 channels and camera control.

Page 99

CONFERENCING & COMMUNICATIONS WIRED SYSTEMS

SDC 8200 CU-M Provides for up to 50 participants, offers interpretation management for up to four channels, as well as camera control.

SDC 8200 AO Provides for up to 50 participants, offers interpretation management for up to four channels, as well as camera control.

SDC 8200 SOFTWARE The SDC 8200 conﬁguration and control software makes it easy for conference managers to organize the speeches and contributions from participants throughout the hall. Depending on the license package selected, the following options are available: • Microphone control with seating plan • Microphone control via name list • Participant database • Voting module • Agenda administration • Graphic display of voting results • Print-out of voting results via network slave PCs • Chip card programming • Text messaging • Interpreter conﬁguration • Conference control via network slave PCs

SDC 8200 SYS This configuration and control software allows you use the full performance of the SDC 8200 CU based conference and interpretation system. This software is a key tool for large conferences of up to 1024 participants where control and monitoring are of a special importance.

SDC 8200 SYS-M This configuration and control software is specifically designed for SDC 8200 CU-M and is ideal for small and midsize conferences of up to 50 participants.

Page 100

CONFERENCING & COMMUNICATIONS WIRELESS SYSTEMS

RF - WICOS

CONFERENCE SYSTEM

WiCOS is the new generation of mobile and wireless conference systems. It uses with outstanding ďŹ&#x201A;exibilty all advantages of todays digital communication technology.

WICOS D The basic version of the WiCOS delegate unit for discussion features a detachable gooseneck microphone, built-in loudspeaker, two headphone sockets with individual volume settings and the prominent MIC key with status-LED. Power supply via Lithium-Ion battery pack.

WICOS C The chairman unit for discussion administration features a detachable gooseneck microphone, built-in loudspeaker, two headphone sockets and the MIC key with status-LED. In addition WiCOS C offers two function keys, as well as two chairman keys. Power supply via Lithium-Ion battery pack.

WICOS DV Delegate unit for conference with voting and interpretation. It features a detachable gooseneck microphone, built-in loudspeaker, two headphone sockets with individual volume settings, channel selection with two OLED displays and MIC key with LED. Three further keys are used for votings. Power supply via Lithium-Ion battery pack.

WICOS CV Chairman unit for conference with voting and interpretation. It features a detachable gooseneck microphone, built-in loudspeaker, two headphone sockets, channel selection and MIC key with LED. Two OLED displays for voting, volume or media control, three keys for voting and further two for chairman application. Power supply via Lithium-Ion battery pack.

WICOS AP Thestand-alone access point is the center of WiCOS and interface to SDC 8200. It features 3 antennas radiating within a radius of 30 meters in license-free frequency range of 2,4 Ghz or 5 GHz. Three status LED, Ethernet connection for configuration and options for wall, tripod or table mounting.

WICOS CASE This hard-top case with wheels and pull-out handhold offers space for twelve WiCOS delegate units and gooseneck microphones, one accesspoint and a separate accessory compartment for power supply units.

Page 101

CONFERENCING & COMMUNICATIONS WIRELESS SYSTEMS

RF - TOURGUIDE

INFORMATION SYSTEM

Tourguide 2020-D-US Unique Wireless Information System.

Designed so that a speaker can communicate at a normal conversational level and be heard and understood by an entire group – even in high-noise areas – Tourguide sytem 2020-D-US consists of a wireless microphone and any number of receivers.

HDE 2020-D-US This truly unique receiver integrates both the receiver and headphones into one convenient, lightweight and easy-to-use device. Channels: . . . . . . . . . . . . . . . 6 (selectable) Frequency range: . . . . . . . . 926 – 928 MHz

EK 2020-D-US NEW Body Pack receiver Channels: . . . . . . . . . . . . . . . 6 (8 for ﬁxed system) Frequency range: . . . . . . . . 926 – 928 MHz

SK 2020-D-US Channels: . . . . . . . . . . . . . . . 6 (selectable) Frequency range: . . . . . . . . 926 – 928 MHz

SK 2020-D Channels: . . . . . . . . . . . . . . . 6 (selectable) Frequency range: . . . . . . . . 926 – 928 MHz

HS 2-EW Nominal impedance: . . . . . 1 Frequency response: . . . . . 20 – 20 .000 Hz ± 3 dB

SKM 2020-D-US the easiest way to address your tour group is to speak into the hand-held microphone. If a participant has a question, just hand over the microphone so that the group can understand whatever needs to be explained. The transmitter is exceptionally durable and easy to operate. Channels: . . . . . . . . . . . . . . . 6 (selectable) Frequency range: . . . . . . . . 926 – 928 MHz

Page 102

CONFERENCING & COMMUNICATIONS WIRELESS SYSTEMS

EZL 2020-20 L There is more inside: This charger case acts as both the storage case for all equipment and charging station for up to twenty TourGuide receivers and two transmitters or rechargeable batteries. The Copy button offers a quick and convenient way to immediately set all receivers to the selected channel.

SR 2020-D-US The single channel rack mountable transmitter features professional XLR-3 input for line or mic level audio sources . Up to 6 or 8 channels are available for mobile or installed applications. Channels: . . . . . . . . . . . . . . . up to 8 (selectable) Frequency range: . . . . . . . . 926 â&#x20AC;&#x201C; 928 MHz

L 2021-40 This rack mountable charger has been designed for installed applications. It accomodates up to 40 receivers, with an automatic quick-charge feature. For immediate channel configuration, the green Copy button sets all receivers to the same channel. The Ethernet interface of L 2021-40 allows networking of up to 125 chargers with up to 5,000 receivers.

CC 2021 The control software offers easy channel set-up and monitoring. Up to 125 chargers can be controlled via Ethernet. Any number of receivers or chargers can be grouped and configured simultaneously on your PC.

Page 103

CONFERENCING & COMMUNICATIONS WIRELESS SYSTEMS

RF - GUIDEPORT GuidePort is a revolutionary new digital tourguide and information system for both indoor and outdoor use . Visitors can choose their own route through an exhibition or theme park and this system provides them with the audio information relevant to the area they are in. The GuidePort system not only accommodates several languages, but also different levels of information, and for example, can be tailored for adults or children. •Guided tours with real guide •Automatic tours Automatic Updating GuidePort allows you to implement “mixed” projects such as a tour of the city and of various museums. All this information is stored inside the receiver, but also the visitor’s receiver automatically detects any change in information – such as a new exhibition in a museum – and updates the information on the spot.

GP EK 3202-4 The digital GuidePort RF wireless diversity receiver supplies the visitors of a theme park or exhibition with the selected audio program. It features four buttons for adjusting the volume and repeating or stopping the audio information. The receiver can store up to 20 hours of audio information and is fitted with an anti-theft feature.

GP EK 3202-5 Like the GP EK 3202-4 but with the additional ‘magniﬁer’ key, which allows access to additional information.

GP EK 3202-0 Like the GP EK 3202-4 but with an additional full numeric keypad that permits manual selection of specific locations or switching to alternate languages or levels.

GP SK 3202 The mobile transmitter, together with a microphone (sold separately), allow you to address visitors as a separate group.

Page 104

CONFERENCING & COMMUNICATIONS WIRELESS SYSTEMS

GP ID 3200 IDENTIFIER Installed near an exhibit, at a point of information at a theme park or near a video screen, the identifier automatically triggers audio information for visitors. The range and trigger mode can be chosen individually. The inconspicuous identifier is available in both indoor and outdoor versions.

GP 03 M Open, single-sided clip-on headphone for the GuidePort receiver.

GP 03 Open, dynamic clip-on headphones for receiver.

the GuidePort

GP SR 3200-2 Cell transmitter that stores the audio information that is transmitted to visitors. Pre-produced digital audio is stored as ďŹ&#x201A;ash memory, while real time analog audio sources, such as ďŹ lms or live shows, are fed to the GP SR 3200-2 via configurable inputs.

GP L 3202-10 Charger unit for up to ten GuidePort receivers.

GUIDEPORT ANNOUNCEMENT MANAGER The Announcement Manager handles any type of announcement at an exhibition or theme park. It is possible to exclusively address selected groups, languages or areas or to use this module as a service channel for the staff. The Manager handles both pre-recorded messages and spontaneous announcements recorded on the spot.

GUIDEPORT ANNOUNCEMENT MANAGER The Statistics Manager allows the organizers of an exhibition or theme park to gather additional information about visitor behavior.

Page 105

CONFERENCING & COMMUNICATIONS AUDIO BEAM

RF - AUDIO BEAM AudioBeam is a highly directional loudspeaker, that allows sound to be placed precisely where you need it. Perfect for sepcialty applications in museums, exhibitions or theme parks. AudioBeam unlike conventional loudspeakers, which are only able to focus sound at high frequencies, AudioBeam emits sound as a lobe, which can be precisely directed and reﬂected on objects. No sound is audible beside or behind an AudioBeam – you only hear the audio information if you are directly within the sound beam or, if the sound is reﬂected by a smooth surface, making AudioBeam an ideal tool for information terminals or exhibitions . Modulation: . . . . . . . . . . . . . Wideband AM Carrier frequency: . . . . . . . . 40 kHz Sound pressure level: . . . . 75 dB ± 5 dB

Page 106

CONFERENCING & COMMUNICATIONS WIRELESS SYSTEMS

IR - INFRARED Infrared Wireless Systems. Suitable for public addresses, conferences, museums, exhibitions, translation and other applications. Sennheiser infrared wireless systems are an effective and convenient alternative to conventional hard-wired systems. With their unique amplitude and frequency modulation.

SI 30/SZI 30 Small area modulator/emitter or emitter only. Transmission area: 750 sq. ft. (single channel) 375 sq. ft. (two channel) Carrier frequencies: 2.3 MHz/2.8 MHz

SI 1015 Two channel wideband modulator . Carrier frequencies: 2.3 MHz/2.8 MHz Frequency response: 20 â&#x20AC;&#x201C; 15,000 Hz

SP 230 Portable two channel modulator/emitter. Transmission area: 4,000 sq. ft. (single channel) 2,000 sq. ft. (two channel) Carrier Frequency: 2.3/2.8 MHz

SZI 1015 Medium area DC powered emitter. Also available in white. Transmission area: 4,000 sq. ft. (single channel) 2,000 sq. ft. (two channel)

SZI 1015-T Small area modulator/emitter or emitter only. Transmission area: 750 sq. ft. (single channel) 375 sq. ft. (two channel) Carrier frequencies: 2.3 MHz/2.8 MHz

SZI 1029 Large area emitter. Also available in white. Transmission area:. 12,500 sq. ft. (single channel) 6,250 sq. ft. (two channel)

SZI 1029-24 24-volt DC powered radiator.

SZI 1029-10 10 watt version for coverage up to 18,000 sq. ft. Also available in white.

Page 107

CONFERENCING & COMMUNICATIONS WIRELESS SYSTEMS

RI 250 Ultralight mono stethophone receiver. Carrier Frequency: 2.3 MHz Frequency response: 18 – 18,000 Hz

HDI 302 Two channel stethophone receiver with squelch. Carrier Frequency: 2.3/2.8 MHz switchable Frequency response: 18 – 18,000 Hz

SI 29-5 single rack-space modulator that transmits up to five narrowband channels. May be daisy-chained for up to 32 channels. Carrier Frequency: 55 - 1,335 kHz

SZI 1029 Large area emitter. Also available in white. Transmission area: 12,500 sq. ft. number of channels

HDI 1029 PLL 16 MULTI-CHANNEL SYSTEM Small area modulator/emitter or emitter only. Transmission area: 750 sq. ft. (single channel) 375 sq. ft. (two channel) Carrier frequencies: 2.3 MHz/2.8 MHz

EKI 1029 PLL 16/PLL 32 MULTI-CHANNEL SYSTEM EKI 1029 PLL 16/PLL 32

Slim, compact multi-channel bodypack receiver with 16 or 32 channels. Also available as PLL 16-H version (channels 16-31).

SZI 1029-24 MULTI-CHANNEL SYSTEM 24-volt DC powered emitter.

SZI 1029-10 MULTI-CHANNEL SYSTEM 10 watt version for coverage up to 18,000 sq. ft./number of channels.

Page 108

CONFERENCING & COMMUNICATIONS WIRELESS SYSTEMS

HDI830 Ultra-light stethoset receiver with switchable stereo/mono channels A or B. Compatible with Sennheiser wideband infrared modulators and radiators. Carrier Frequency: 2.3 & 2.8 MHz Frequency Response: 50 to 16000 Hz

RI830S Ultra-light receiver with switchable stereo/mono channels A or B. Compatible with Sennheiser wideband infrared modulators and radiators. Useable with headphones and induction neck loop. Carrier Frequency: 2.3 & 2.8 MHz Frequency Response: 50 to 16000 Hz

EZT 3011 Induction neck loop especially designed for use with Sennheiser RI 830S receiver.

EZT 3012 Induction neck loop with (40cm connection cable), for use with other Sennheiser receivers. 3.5mm Stereo Jack

L 300 10-10 Sennheiser recharging unit suited for charging up to 10 receivers. Charging units cannot be cascaded.

Page 109

Syntec International Australia: Free Call 1800 648 628 | email: sales@syntec.com.au Syntec International New Zealand: Free Call 0800 100 755 | email: sales@syntec.co.nz