MidiRO™ Reverse Osmosis Systems Producing up to 800 litres/hr of high purity water
The ELGA Process Water MidiROTM Reverse Osmosis systems produce high purity water, removing up to 98% of dissolved inorganics and over 99% of large dissolved organics, colloids and particles. Flow rates from 90 to 800 l/hr
Features & Benefits
Applications
• Low Energy membranes result in lower operating pressures; cost savings
• Industrial Process Water
• Optimised flow: size ratio; space saving and efficient
• Boiler Feed • Cleaning and rinse water • Electronics
• 1 µm pre filtration included within unit; membrane protection
• Healthcare
• Programmable user interface; simple operation, monitoring and storage (14 days) of flow rate, conductivity and temperature values
• Oil and Gas
• Modem & RS232 connections • Dry run monitor; pump protection • Treated water diverted at startup; ensures water quality • Timed recirculation rinse; reduces membrane fouling
• Pharmaceuticals • Chemical Industry • Pulp and Paper Related Services
Our AQUAservice maintenance agreements are designed to allow you to choose from our wide range of capabilities the level of support you require to meet your application, operational and budgetary needs.
• Volt free contact alarm output
Hydrex Chemicals
• Alarm logging facility
Hydrex water treatment chemicals from ELGA Process Water should be used for optimised operation
Option
• Output to PLC via analogue signal for conductivity monitoring
MidiRO™ Model Nominal Flows at 12°C*
10-100 EP
10-200 EP
10-300 EP
10-500 EP
10-750 EP
Permeate
litres/hr
90-110
180-220
280-330
450-550
650-80
Feed
litres/hr
150
300
450
750
1000
%
70
70
70
70
70
%
96-98
96-98
96-98
96-98
96-98
kW
0.56
0.56
0.56
1.5
1.5
Nominal Recovery
Typical Salt Rejection Pump Motor Size
* Flow rates are dependent on feed water quality, those quoted are typical values based on 1000 mg/l TDS & SDI <3.
System Dimensions & Weights Model Height
Depth
Width
Weight
10-100 EP
10-200 EP
10-300 EP
10-500 EP
10-750 EP
mm
1010
1260
1260
1260
1260
mm
620
620
620
620
620
mm
600
600
600
600
600
kg
59
61
68
73
95
Feed Water Supply Quality Potable water free from organic contamination, chlorine and suspended matter. A softened water supply is normally required. Supply Pressure: Temperature:
min. 2 bar min. 2°C
max. 6 bar max. 25°C
Electrical Supply All models 230V 50Hz standard. For higher flow rate applications consult ELGA Process Water.
ELGA Process Water Marlow International Parkway, Marlow Buckinghamshire SL7 1YL, UK tel. +44 (0) 1628 897000 fax. +44 (0) 1628 897001 email sales.uk@veoliawater.com www.elgaprocesswater.com
ELGA Process Water Orbital House Redwood Square East Kilbride G74 5PR, UK tel. +44 (0) 1355 588140 fax. +44 (0) 1355 588141 email sales.uk@veoliawater.com www.elgaprocesswater.com
LITR 39003/Rev C: 09/10 In keeping with the progressive nature of the company, we reserve the right to amend details without notice
System Performance