Boss Seven Group Catalogue www.boss7group.com
THE
MAINTENANCE
RECOMMENDATIONS
Machinability
• CLEANING PROCEDURES After project completion, construction soils or dirt, including mortal, sail, and concrete should be removed as quickly as possible.
Paintable
• PRIOR TO CLEANING An initial step of forceful water rinse from top down is recommended prior to any cleaner application. Cleaning with corrosive material is prohibited on of the panel surface. Avoid aggressive acid, alkali or ethyl alcohol which can cause damage to the panel surface.
Lightweight
Sunlight Resistant
• SOIL REMOVAL The simplest method would be water rinse with moderate pressure, but if this does not remove the soil, then other initiative should be tested. Added some detergent in the water and used with sponge to wipe out the soil.
Fire Resistant
Moisture & Water Resistant
• CLEAN DETERGENT/SOLUTION When a detergent is used to removing the soil, it should be used with soft sponge and soft rag. After washing, the surface should be thoroughly rinsed with clean water.
WHAT IS
CELUKA FOARMBOARD Also known as CLC Formboard. Used mainly for industrial and manufacturing purposes. Primarily used in promotion ads, road signs seen outdoors, theatrical props and furniture.
• OPERATION SEQUENCE Generally, the clean and rinse operation moves from the top to bottom of the building. For one storey or low elevation building, it is recommended to clean whether from the top to the bottom, or from bottom to the top of the building.
METHOD OF CLC INSTALLATION
• SCRATCH PREVENTION To prevent the surface from scratch, do not over clean the panel surface. Aggressive rubbing and sharp cleaning tools can harm and damage the surface.
To Direct Existing Wall
REMARK •Maintenance and cleaning are always recommended to enhance the look of the building. Please read the above before undertaking the cleaning process. Coating damage resulted by improper cleaning shall not be covered by the term and condition of product warranty.
Celuka foarmboard is a an extremely versatile material and very well resistant to damaging effects of rain, wind, and sunlight. It suitable for external due to its close cell structure. Celuka foarmboard is a an extremely versatile material and very well resistant to damaging effects of rain, wind, and sunlight. It suitable for external due to its close cell structure.
• Cleaning required subjected to building location;
To Custom-made T Angle
To Custom-made T Angle
To Custom-made T Angle
To Custom-made T Angle
Urban area 1 time / year
Coastal area 1 -2 time / year
Insudtrial area 1 -2 time / year
Boss Seven Group Catalogue www.boss7group.com
THE
SAMPLES
THE
DESIGNS
CMP 502 CMP 502 CMP 502 CMP 502
CMP 502
CMP 502 CMP 502 CMP 502 CMP 502 CMP 502
CMP 502 CMP 502
CMP 502
CMP 502
Ornaments Designs vMaintenance and cleaning are always recommended to enhance the look of the building. vthe look of the building.
CMP 502
PROVIDED
CMP 502 CMP 502 CMP 502
CMP 502 Facade •Maintenance and cleaning are always recommended to enhance the look of the building.
CMP 502
CMP 502 Mihrab •Maintenance and cleaning are always recommended to enhance the look of the building. Please read the
CMP 502
Fascia Board •Maintenance and cleaning are always recommended to enhance the look of the building.
CMP 502
Minaret •Maintenance and cleaning are always recommended to enhance the look of the building.
CMP 502
Facade • Fence • Mihrab • Panel •3D Signage