LIVE VIRTUAL AUCTION
CNC MACHINE TOOL 3 COMPANIES
Tuesday October 29, Starting at 5:00 PM in the afternoon. No bidding on site. Limited selling time!! All bids are submitted using www.bidspotter.com.
Various locations:
Quality Machine Products, Inc. 1522 15th Street, Rock Valley, Iowa.
Rocket Manufacturing is being used at the Rock Valley School district, Rock Valley. Iowa Greenway & Asso 3811 450th St, Orange City, Iowa.
Special Auction notification: During June 2024, the city of Rock Valley, IA experienced a flooding event. The items being sold for Quality Machine Products, Inc. and Rocket Manufacturing were involved in floodwaters. The flood waters were approximated to be 30 inches deep inside the buildings. The flooded conditions were five to six hours.
Quality Machine Products, Inc. Have cleaned as much of the flood residue as possible. There was approximately 30 inches of water inside the building. It’s important for any. Bidders and the ultimate buyers to understand the machines will need to have maintenance and or repair Before they can be operating. The machines wore. Under power and operating before the flood. The machines which are being offered at this auction cannot be demonstrated. Quality Machine Products, Inc.
Most of the core parts we manufactured were precision components parts for various sized hydraulic cylinders with very tight tolerances ranging from +/-.001 to sometime as tight as +/-.0005. This required quality machines and consistent maintenance. We used a special water-based coolant in all our machines and had a special cleaner called Wamex run through them monthly. Once a week during production the coolant was run through a reclaimer cleaning machine to remove any contaminates. All machines had all coolants drained and thoroughly cleaned for sure once a year. You are purchasing machines that have been maintained and cared for well.
Quality Machine Products, Inc was not ISO certified but we implemented many ISO policies being our operations manager was a trained ISO lead auditor in prior employment.
Rocket Manufacturing is being used at the Rock Valley School district, Rock Valley. Iowa. The Three machines which are being. Offered all. Included in the flood. Buyers must consider necessary repairs or maintenance before these machines can be operated. These machines are located at the high school and will. Need to be removed from the high school according to the loadout terms and conditions.
Arranged and Conducted by:
Greenway & Asso 3811 450th St, Orange City, Iowa, are selling from their warehouse in Orange City, Iowa.
Inspection is by appointment only.
Removal: Items purchased at Quality Machine Products, Inc. 1522 15th Street, Rock Valley, Iowa, need to be removed by November 6. Loading will start October 31, 8:00- 5:00 PM. All load out is by appointment. No loading on Sunday.
Rocket Manufacturing is being used at the Rock Valley School district, Rock Valley. Iowa. Removal is by appointment and according to the school district terms and conditions. Greenway & Asso 3811 450th St, Orange City, Iowa. Normal business hours and days. An appointment is required.
Rigger: Contact Sioux Falls Crane & Hoist, Inc., 2000 N 4th Ave, Sioux Falls, SD 605 330 2724
Terms and Condition: All items sell without warranty or guarantee. All items sell as is, where is, like is. All items must be paid for in full before they can be removed. Payment is in the form of cash, cashier’s check, approved business check or wire transfer. Additional terms and conditions are found on www.bidspotter.com and must be approved before bidder can participate.
2021 Cosen NC horizontal bandsaw
Lot 131 1 2021 Cosen NC horizontal bandsaw, model G320, SN 110CM00822, dual column, 230V 3 pH, blade size 34 mm W x 4240 mm L, blade speed m/min 20-100, cutting capacity round 325 MM12.8”, 325 mm x 325mm square, 12.7953”, rectangle 325 x 380 mm 12.7953” x 14.9606, automatic feed with shuttle vise, can store up to 100 jobs, hydraulic blade tensioning, 5.7” Color touch screen Mitsubishi PLC control, coolant, 5HP motor, approximately weights 4850 pounds, double reacting vises, full stroke hydraulic cylinder, Double reacting vices, automatic kerf compensation, Inverter controlled infinitely variable blade speed. Purchased new, one owner. Was involved in a temporary flood waters. Owned by Quality Machine Products, Inc.
Hydmech automatic CNC horizontal bandsaw
Lot 133 1 Hydmech automatic CNC horizontal bandsaw, model H230A, SN 5-08-16-143-SB, fully enclosed cabinet, Rectangular cutting capacity 9” x 9”, Round cutting capacity 9 inch, blade size 1” by 9 foot 8 inches, blade drive 3 HP variable frequency drive, 240V 3 PH, Blade speed 50- 350 SFM, Automatic multi-indexing 0 to 19”, remnant length 2.5 inches, (6 inch with bundling). Machine weighs approximately 2200 pounds, table height. 35 inches, requires a footprint of 61 inches by 63 inches by 67 inches. Front split vice, Full capacity full stroking hydraulic vices. , hydraulic positive down feet, blade breakage switch. This saw was purchased new as a 1 owner saw, was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
1998 HEM horizontal bandsaw
Lot 132 1 1998 HEM horizontal bandsaw model H90A-B/F, SN 603398, bi function control, 12.75” round capacity, flat stock 12.75” x 12.75”, blade width 1”, 3HP motor, Was involved in a temporary flood waters. Owned by Quality Machine Products, Inc.
2006 Haas vertical machining center
Lot 134 1 2006 Haas vertical machining center, model VF-2SS, SN 49239, X axis 30” Y axis 16”, Z axis 20”, table size 14” x 36”, CT 40 Spindle, 20 ATC carousel, spindle to table 4”-24”, inline direct drive spindle, VOP-A chip conveyor programable coolant, 7500 RPM, through spindle coolant, High Speed tool changer, remote jog handle, Haas legacy control, was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
2000 Haas VF
135 1 2000 Haas VF 2 SN 20944, vertical machining center, X axis 30” Y axis 16”, Z axis 20”, CT 40 Spindle, 20 ATC carousel, spindle to table 4”-24”, 20 HP Vector drive, Haas Legacy control, was involved in temporary flood waters. Was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
2020 Smart Machine Tool CNC Horizontal Turning Center
137 1 2020 Smart Machine Tool CNC Horizontal Turning Center, Model NL3000BM, SN N30M11201043, Swing over the bed 27.56”, Maximum turning diameter 17.72”, Maximum turning length 29.53”, samchully 12 inch 3 jaw chuck, Spindle nose A2-11, Spindle motor. 29 .5 / 47 HP, 2800 RPM, Bar capacity 4.02 inches, Fanuc OI-TF series control, milling, chip conveyor, 2800 RPM main spindle, carry along programable tail stock, parts catcher, chip conveyor, purchased new, one owner. The ways show surface rust. cutting time 55200, Was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
2022 Hunyadi CNC Turning Center
136 1 2022 Hunyadi CNC Turning Center model HD2600SY, SN G1713 0040, five axis of control, 10” Samcully 3 jaw chuck, 5” 3 jaw sub spindle chuck, box column ways, Travel X axis 215 mm 8.46”, Y axis 110 mm 4.33 “, Z axis 680 mm 25.98, ZB axis 680mm 25.98”, 2.6” bar capacity, BMT 55P turret 12 positions, two live tools, 3500 RPM main spindle 25 HP, maximum turning diameter 300 mm 11.811,maxmuin turning length, 610mm 24.0157”, milling tool speed 6000 RPM, Sub spindle 6000 RPM, Tool probe, parts catcher, chip conveyor, 145 PSI, programable tail stock, Hyundai WIA Fanuc control I series smart plus control, tool probe, full contour C Axis, Purchased new. cutting time 24832, Was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
2014 Haas CNC lathe
138 1 2014 Haas CNC lathe, model ST-20, SN 3100340, 2 axis control, 13” X axis, 22.5” Y axis, 2.5” spindle bore, 4000 RPM, 12 position turret, chip conveyor, high pressure coolant, parts catcher, auto tool setter, Haas Legacy control, Intuitive tooling program, cabinet cooler, programable tail stock, rigid tapping, spindle orientation, overhead light package, Was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
2014 SMEC Samsung CNC lathe
139 1 2014 SMEC Samsung CNC lathe model SL30C1000, SN 13H300165, 12” Samchully 3 jaw chuck, 2 axis of control, Swing 25.59”, max turning 21.65”, bar capacity 3.58”, BMT 65 turret, chip conveyor, Fanuc Oi TD series control, LCD monitor, 2500 RPM, tool probe, purchased new, ways are rusty. cutting time 36688, Was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
2018 SMEC Samsung
141 1 2018 SMEC Samsung model SL2500BY, SN 17AGK002, 10” Samchully chuck, swing over bed 25.59”, max turning diameter 15.55”, max turning length 17.72”, bar capacity 2.68”, spindle speed 3500 RPM, 12 tool positions BMT 55, live tooling style turret, sub spindle, high pressure coolant, Fanuc OI TF, cutting time 59616, Was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
2022 Hunyadi CNC Turning Center
140 1 2022 Hunyadi CNC Turning Center model HD2600SY, SN G1713 0040, five axis of control, 10” Samcully 3 jaw chuck, 5” 3 jaw sub spindle chuck, box column ways, Travel X axis 215 mm 8.46”, Y axis 110 mm 4.33 “, Z axis 680 mm 25.98, ZB axis 680mm 25.98”, 2.6” bar capacity, BMT 55P turret 12 positions, two live tools, 3500 RPM main spindle 25 HP, maximum turning diameter 300 mm 11.811,maxmuin turning length, 610mm 24.0157”, milling tool speed 6000 RPM, Sub spindle 6000 RPM, Tool probe, parts catcher, chip conveyor, 145 PSI, programable tail stock, Hyundai WIA Fanuc control I series smart plus control, tool probe, full contour C Axis, Purchased new. cutting time 24832, Was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
SMEC Samsung
142 1 SMEC Samsung model SL25BSY, SN 13K3K0010, 10 inch Samchully chuck, 12 position turret with live tooling capacity, 3500 RPM main spindle, 4000 RPM sub spindle 8 inch chuck, Fanuc series OI – TD control, chip conveyor, high-pressure coolant, tool probe, parts catcher, 3 inch spindle bore, 2 inch spindle bore on the sub spindle, purchased new. swing over bed 25.59”, max turning diameter 14.17”, max turning length 20.47”, cutting time 11056, Was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
2000 Okuma CNC Horizontal Turning Center
Space turn
143 1 2000 Okuma CNC Horizontal Turning Center Space turn LB300 1SC-500 V12 Big Bore, SN 1202 0955, new spindle drive unit in 2020, spindle rebuilt in 2020, a warranty spindle drive replacement in 2021, reseal of the flex-e on air chuck in 2023, swing over bed 20.87”, swing over carriage 20.87”, swing over cross slide 16.14”, distance between centers 20.47”, collet chuck, 4.72” bar capacity, 2 axis of control, 12 position turret, coolant, spindle collet no chuck, parts catcher, Okuma OSP-U100L control, Was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
Leblond Makino 19” Regal Servo Shift engine lathe
154 1 Leblond Makino 19” Regal Servo Shift engine lathe, SN 14E-463, 19” swing, English metric thread, 1600 max RPM, 3 jaw chuck, Sony DRO, thread dial, condition is unknown. Consigned machine.
2008 Okuma CNC Horizontal Turning Center
144 1 2008 Okuma CNC Horizontal Turning Center model Captain L 370, SN 519624, 2 axis of control, 20.87” swing over bed, 20.87” swing over carriage, 16.54” swing over cross slide, 20.47” distance between centers, milling capacity might not be functioning, Was involved in temporary flood waters. Owned by Quality Machine Products, Inc.
Okuma CNC lathe
155 1 Okuma CNC lathe, model 762S-BB, 04-2000-1855, max turning diameter 16.14”, max turning length 30”, bar capacity 3.58” big bore option. X axis 11.81”, Z axis 3.46”, 12 position turret, appears to be in poor condition. Consigned machine.
To see detailed photos please visit
Cincinnati centerless grinder
156 1 Cincinnati centerless grinder, model SN 2M8H58E-6, condition is unknown. Consigned machine.
Doosan Lynx CNC lathe
158 1 Doosan Lynx CNC lathe model 220A, SN ML0013-005667, 8” chuck, 6000 RPM, X axis 8”, Y axis 13.38”, 2” spindle bore, chip conveyor, Fanus I series, parts catcher, tail stock, belongs to Rocket Manufacturing being used at the Rock Valley School district, was involved in temporary flood waters.
2000 Haas verical maching center
159 1 2000 Haas verical maching center model VF2, SN 20066, 20HP vector drive, X axis 30”, Y axis 16”, Z axis 20”, table 14” x 36”, chip auger, CT 40 spindle, belongs to Rocket Manufacturing being used at the Rock Valley School district, was involved in temporary flood waters.
2001 Acer Dynamic engine lathe
160 1 2001 Acer Dynamic engine lathe 1440G, SN 111020110, 14” swing, 40” center to center, Newall Topaz DRO, model TL211000, SN A0150BC, 3 jaw chuck, English Meteric threading, 2000 max RPM, belongs to Rocket Manufacturing being used at the Rock Valley School district, was involved in temporary flood waters.
Okuma Cadet
161 1 Okuma Cadet model LNC-8, SN DO96, swing over bed 15.7”, Maximum turning diameter 9.84 inches, maximum working length 20 .47 inches, spindle bore 2.5 inches, bar capacity 2.00 inches, spindle speed 4200 RPM, maximum 20 horsepower Spindle motor, 12 position turret, machine weighs approximately 10,000 pounds, Ccollet chuck, tail stock, parts catcher, chip conveyor, automatic lubrication, transformer, color graphics, OSP5020L control. Buyer will take delivery at Greenway & Asso, 3811 450th St, Orange City, Iowa.
Wellsaw horizontal
Automatic Bandsaw
163 1 Wellsaw horizontal Automatic Bandsaw model 14, SN 1400, Capacity round 15 inch, rectangle 15 inch by 18 inch , square 15 inch, 5 horsepower, blade speed zero to 460 feet per minute, blade wheel diameter 19 inches, hydraulic motor 2 horsepower, maximum shuttle feed length 24 inches, number of shuttles 40, variable speed drive, automatic or manual operation, 7 foot in feed with shuttle, 6 foot exit conveyor. Buyer will take delivery at Greenway & Asso, 3811 450th St, Orange City, Iowa.
1996 Daewoo Puma
162 1 1996 Daewoo Puma, Model 10S-B, serial number PS 101027, 10 inch Kitagawa chuck, RPM range 15-3150RPM, bar capacity 3.58 inches without Chuck, Chuck bore size 3.05 inches, bar capacity 3.05 inches, maximum swing 22.44 inches, maximum turning length 30.31 inches, rapid travels X 480 IPM, rapid travels Z 630 IPM, main motor 30 horsepower, tail stock 5 Morse taper, 12 station turret, hydraulic tail stock, tool probe, parts catcher, foot switches, Mitsubishi Meldas 500 control, belongs to Greenway and Associates. Buyer will take delivery at Greenway & Asso, 3811 450th St, Orange City, Iowa.
1999 Hurco
164 1 1999 Hurco BMC30M, SN 0773, Table size 16.5 inches by 44 inches , table travels 17 inches by 30 inches, vertical travel 24 inches, table load capacity 3000 pounds, rapid traverse 1181 IPM, Spindle speeds 8000 RPM, spindle taper CT40, tool carousel 24 station, control Ultimax split screen, belongs to Greenway and Associates. Buyer will take delivery at Greenway & Asso, 3811 450th St, Orange City, Iowa.
Fryer CNC bed mill
165 1 Fryer CNC bed mill model MB14, SN 14259, Table size 16 inches by 54 inches, table travels 20 inches by 40 inches, vertical travel 21 inches, quill travel 6 inches, quill taper number 40, spindle speeds 60 up to 4200 RPM, 5 horsepower spindle motor, table weight capacity 1650 lbs, machine weighs approximately 5600 pounds, equipped with a Fanuc 21 IM control, X and Y hand wheels, power draw bar, coolant, splash pans, automatic lubrication. belongs to Greenway and Associates. Buyer will take delivery at Greenway & Asso, 3811 450th St, Orange City, Iowa.
FLOOR FANS
101 2 Pedestal base floor fans, 120 volt, adjustable height, one fan does not have fan blades. Owned by Quality Machine Products, Inc. Products, Inc.
LIFT CART
102 1 Lift cart, needs wooden support frame to support the load. Mounted on 4 casters. Owned by Quality Machine Products, Inc.
CART
117 1 Steel bundle cart, center axle, end casters. Owned by Quality Machine Products, Inc.
PALLET RACKING
118 1 1 section of pallet racking, (4) uprights 30” width, 10’ height, (18) 12’ bars, partial wooden cross pieces, tear drop adjustable, buyers removes at buyers expenses. No contents. Owned by Quality Machine Products, Inc.
119 1 1 section of pallet racking, (2) uprights 42” width, 10’ height, (6) 10’ bars, wire shelving, tear drop adjustable, buyers removes at buyers expenses. No contents. Owned by Quality Machine Products, Inc.
1 Bench grinder, 120V, mounted on base. Owned by Quality Machine Products, Inc. 105 1 Baldor bench grinder, 120 volt, mounted on base. Owned by Quality Machine Products, Inc.
106 1 Bench grinder, 120V, mounted on base. Owned by Quality Machine Products, Inc.
107 1 Bench grinder, 120V, mounted on base. Owned by Quality Machine Products, Inc.
108 2 Shop King Floor model drill press, step pulley RPM adjustment, manual down feed, 120 volt, includes chucks. Owned by Quality Machine Products, Inc. 109 2 (2) floor model drill presses, 120 volt, manual down feed. Step pulley RPM adjustment. Owned by Quality Machine Products, Inc.
110 1 Metal shelving, has been disassembled. (46 shelves) Owned by Quality Machine Products, Inc.
111 1 H Frame Press, does not include the hydraulic jack, frame only. Capacity is unknown. Owned by Quality Machine Products, Inc.
113 1 Assorted steel work stands, various sizes. Owned by Quality Machine Products, Inc.
114 1 Cantilever rack, free standing, single sided, 7 tier, 4 uprights, adjustable arms, 10’ left to right, 9’6” height, 36” arms. No contents rack only. Buyers removes at buyers expenses. Owned by Quality Machine Products, Inc.
115 3 Steel dump tubs, various sizes, with forklift channels. Owned by Quality Machine Products, Inc.
116 1 Free standing cantilever rack, double sided, 36” arms, 20’ length, 7’ width, 11’ height, (6) uprights. Buyer removes at Buyers expenses. Owned by Quality Machine Products, Inc.
120 1 1 section of pallet racking, (3) uprights 30” width, 8’ height, (12) 10’ bars, wooden shelving, tear drop adjustable, buyers removes at buyers expenses. No contents. Owned by Quality Machine Products, Inc.
TUBS
121 1 Assorted steel tubs and wire basket.
122 3 Assorted steel tubs, forklift channels, non dumping. Owned by Quality Machine Products, Inc.
PALLET RACKING
123 1 1 section of pallet racking, (3) uprights 30” width, 8’ height, (12) 12’ bars, wire shelving, tear drop adjustable, buyers removes at buyers expenses. No contents. Owned by Quality Machine Products, Inc.
124 1 1 section of pallet racking, (4) uprights 42” width, 10’ height, (18) 12’ bars, wire shelving, tear drop adjustable, buyers removes at buyers expenses. No contents. Owned by Quality Machine Products, Inc.
TABLES
125 1 Metal shop table, 30” x 72”. Owned by Quality Machine Products, Inc.
126 1 Metal shop table, 30” x 72”. Owned by Quality Machine Products, Inc.
127 1 Metal shop table, 30” x 72”. Owned by Quality Machine Products, Inc.
SURFACE PLATES
128 1 Black granite layout table, no ledge, 36”x48”, on steel stand with caster. Owned by Quality Machine Products, Inc.
129 1 Black granite layout table, 2 ledge, 36”x36”, on steel stand. Owned by Quality Machine Products, Inc.
130 1 Sheffield CMM black granite surface plate, this is the base only. Owned by Quality Machine Products, Inc.
AIR COMPRESSOR
147 Gardner Denver air compressor, model EDEQJH – 50 HP, SN 440-8863, 50HP, Was involved in temporary flood waters. Repairs will need to be completed. Owned by Quality Machine Products, Inc. .
148 Live tools Alps Tool- Lyndex P/No. OKU-L370-X, Okuma No. A555-2541 Owned by Quality Machine Products, Inc. .
149 2 Live tools Alps Tool- Lyndex P/No. OKU-L370-Z, Okuma No. A555-2540 Owned by Quality Machine Products, Inc. .
TOOLS BANDING TOOL
150 1 Banding tools, reel and shrink wrap
151 1 Kurt machinist vise, model D675, SN 157449, 6" capacity, no handle or vise. Rusting on the entire vise. Owned by Quality Machine Products, Inc. .
152 1 Kurt machinist vise, model D686, SN 157445, 6" capacity, no handle or vise. Rusting on the entire vise. Owned by Quality Machine Products, Inc. .
153 1 Refractometer Owned by Quality Machine Products, Inc. .
157 1 Oil filter Model number 1-3/4N-1A1-100-CSL-VV, SN 0041321-4C, owned by Quality Machine Products, Inc. .