Pneumatic actuator controls catalogue

Global GlobalPresence Presencefor for Peace PeaceofofMind Mind

Pneumatic Actuator Controls

The Best Technology at the Lowest Cost = At Least 22% to 39% Cost Saving

Optimum Method

Vs

Conventional Method

Optimum Method

Vs

Conventional Method

At Least 22% to 39% Cost Saving

Highest Safety Factors

Relief Valves Correctly Sized and Safe to match the Filter Regulator

Reduced Spares Requirement

Highest Flow Products

Check Valves, Flow Control Valves, Pilot Valves, Filter Regulators, Filter Boosters and Solenoid Valves

Innovative Innovative and and Reliable Reliable Valve Valve Solutions Solutions

48 Hr Despatch for Efficient and Quick Delivery Configurable Valve Control Products Simplified for Ease of Selection

www.bifold.co.uk bifold.co.uk

¼" & ½'' - Modular & Nippled Solutions

Comparison Optimum Method

Conventional Method

30% Cost Saving 132% More Flow ¼" MODULAR SOLUTION - CIRCUIT CV

¼" NIPPLED CIRCUIT - CIRCUIT CV

Cv to Open Cv to Close No QEV

0.88

2

With QEV

0.77

3.5

Cv to Open Cv to Close

Please note that Solenoid Cv is 2.0

No QEV

0.57

0.88

With QEV

0.54

3.5

Please note that Solenoid Cv is 1.0

Relief Valves correctly sized and safe to match the Filter Regulator Optimum Method

Conventional Method

25% Cost Saving 135% More Flow ½" MODULAR SOLUTION - CIRCUIT CV

¼" PILOT VALVE CIRCUIT - CIRCUIT CV

Cv to Open Cv to Close

Cv to Open Cv to Close

No QEV

1.33

2.0

No QEV

0.57

0.88

With QEV

1.09

3.5

With QEV V

0.54

3.5

Please note that Solenoid Cv is 2.0

Relief Valves correctly sized and safe to match the Filter Regulator

2

bifold.co.uk

BFD521 November ‘16

Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.

When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.

Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.

is a member of the of companies

© Bifold 2016

½" & 1'' - Modular & Nippled Solutions

Comparison Optimum Method

Conventional Method

22% Cost Saving 75% More Flow ½" FILTER BOOSTER CIRCUIT - CIRCUIT CV

½" PILOT VALVE CIRCUIT - CIRCUIT CV

Cv to Open* Cv to Close

Cv to Open Cv to Close

No QEV

1.96

1.0

No QEV

1.13

1.98

With QEV

1.94

8.9 8.

With QEV

1.11

8.9

*Effective

Relief Valves correctly sized and safe to match the Filter Regulator Optimum Method

Conventional Method

39% Cost Saving 200% More Flow 1" FILTER BOOSTER CIRCUIT - CIRCUIT CV

1" PILOT VALVE CIRCUIT - CIRCUIT CV

Cv to Open* Cv to Close e

Cv to Open Cv to Close

No QEV

10.73

6.0

No o QEV

3.54

5.98

With QEV

8.98

10.0

With ith QEV

3.25

10.0

*Effective

Relief Valves correctly sized and safe to match the Filter Regulator

bifold.co.uk BFD521 November ‘16

Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.

When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.

Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.

is a member of the

3

of companies

© Bifold 2016

¼'' - Pneumatic Direct Acting Solenoid (Cv 1.0) - Circuit

Circuit

Schematic ¼'' Simplest / Bare Circuit

7

1

2

12

3

4a 4b

¼'' Maximum Circuit Options (Non Partial Stroke) 8 5

8

8 9

TO

TO 1

7

11

2

5

o

12

o

3 6

6

6

10

5

6

10

10

4a

4a 4b

1

2

Filter Regulator

Solenoid Valves (Manual Override)

Solenoid Valves (Auto Reset)

3

4

5

Quick Exhaust Valve

Bug Vent/ Silencer

Ball Valve

o

2a

2c

2b

Cyl to Exh Cv 1.9 Into Cyl Cv 3.5

Cv 2.0

Cv 1.0

Cv 0.7

2a

2b

2c

2a

2a 2b 2c 2a FP06P-SI-04-32-NU-V-77A-24D-57 2a FP10P-SI-08-32-NU-V-77A-24D-28LP 2a 2b FP06P-SI-04-32-NU-V-27A-24D-57 2b FP10P-SI-08-32-NU-V-27A-24D-28LP 2b SC06-20-FR-SR-MD-10-V-X3 2c FP06P-S1-A04-32-NU-V-27A-24D-57 2c FP10P-S1-A08-32-NU-V-27A-24D-28LP 2c

Catalogue Section 13 6 Check Valve

2b

2c

2a

FP06P-SI-04-32-NU-V-77A-24D-ML-30 FP06P-SI-04-32-NU-V-27A-24D-ML-30 FP06P-S1-A04-32-NU-V-27A-24D-ML-30 FP10P-SI-08-32-NU-V-77A-24D-ML-28LP FP10P-SI-08-32-NU-V-27A-24D-ML-28LP FP10P-S1-A08-32-NU-V-27A-24D-ML-28LP

Catalogue Section 04

Cv 2.1

4a

2c

2b

Catalogue Section 04

S12-QEV

4b

¼" K4-(1/4NPT)-316 ½" K4-(1/2NPT)-316

BV0104F025TT1KLK-N

Catalogue Section 19 Configurator Catalogue Section 26a

7

8

9

10

Gauge

Block and Bleed Valves

Pressure Relief Valve

Cylinder Plug Valve

11

12

Mechanical Valves

SW Soldo Limit Switch Box Series

o

8a Cv 0.5 8b Cv 0.32

Cv 1.2

8a

PCV-04F-04F-13-023-V

X10 or X11

Cv 2.1

Cv 1.5

Cv 0.73

8b

NV0304F02M5V6K NV0404F02M5V6K

S06-PR4.5

CPV-04F-04F-V

BXS-04-04-M9-32-NU-04-V BXS-04-A04-M9-32-NU-04-V

Catalogue Section 20 Catalogue Section 03 Catalogue Section 26a Catalogue Section 16 Catalogue Section 14 Catalogue Section 09

4

bifold.co.uk

BFD521 November ‘16

Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.

When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.

Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.

SW0120E-10X23A6

Soldo Controls

is a member of the of companies

© Bifold 2016

¼'' - Pneumatic Direct Acting Solenoid (Cv 1.0) - Partial Stroke

Partial Stroke

Schematic

7

4a

4a 7

6a 5

1

8

2

6b 3 4a

6c

4b

1

2

3

4

Filter Regulator

Solenoid Valves (Auto Reset)

Quick Exhaust Valve

Bug Vent / Silencer

Cv 0.7

Cv 1.0

2a

SC06-20-FR-SR-MD-10-V-X3

2c

2b

2a

2a FP06P-SI-04-32-NU-V-77A-24D-57 2b FP06P-SI-04-32-NU-V-27A-24D-57 2c FP06P-S1-A04-32-NU-V-27A-24D-57

Catalogue Section 13

2c

2b

2a FP10P-SI-08-32-NU-V-77A-24D-28LP 2b FP10P-SI-08-32-NU-V-27A-24D-28LP 2c FP10P-S1-A08-32-NU-V-27A-24D-28LP

5

6

Gauge

Cylinder Plug Valves

Catalogue Section 03

bifold.co.uk BFD521 November ‘16

¼" CPV-04F-04F-V

6b

6c

½" S12-CPV ¾" S19-CPV

Catalogue Section 14 Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.

When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.

4b

S12-QEV

¼" K4-(1/4NPT)-316 ½" K4-(1/2NPT)-316

Catalogue Section 19

Configurator

7

8

Mechanical Valves

SW Soldo Limit Switch Box Series

¼" Cv 2.1 ½" Cv 5.1 ¾" Cv 9.8

X10 or X11

4a

Catalogue Section 04

6a

Cyl to Exh Cv 1.9 Into Cyl Cv 3.5

Cv 2.0

Cv 0.73

Cv 0.73

7a

7b

BXS-04-04-M1-32-NU-00-V BXS-04-A04-M1-32-NU-00-V

BXS-04-04-M13-32-NU-00-V BXS-04-A04-M13-32-NU-00-V

Catalogue Section 09

Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.

SW0120E-10X23A6

Soldo Controls

is a member of the

5

of companies

© Bifold 2016

½'' - Pneumatic Direct Acting Solenoid (Cv 2.0) - Circuit

Circuit

Schematic ½'' Simplest / Bare Circuit 7

1

2

12

3

4a 4b

½'' Maximum Circuit Options (Non Partial Stroke) 8

8

8 9

TO

TO

5

1

7

11

2

5

o

12

o

3 6

6

6

5

6

10

10

4a

10

4a 4b

1

2

Filter Regulator

Solenoid Valves (Auto Reset)

Solenoid Valves (Manual Override)

3

4

5

6

Quick Exhaust Valve

Bug Vent / Silencer

Ball Valve

Check Valve

o

Cv 2.0

Cv 2.6

2a

Cv 2.0

2c

2b

2a

Cyl to Exh Cv 6.5 Into Cyl Cv 8.3

4a

SH12-FR-SR-AD-10-X3

2a FP10P-SI-08-32-NU-V-77A-24D-28LP 2a FP10P-SI-08-32-NU-V-77A-24D-ML-28LP 2b FP10P-SI-08-32-NU-V-27A-24D-28LP 2b FP10P-SI-08-32-NU-V-27A-24D-ML-28LP 2c FP10P-S1-A08-32-NU-V-27A-24D-28LP 2c FP10P-S1-A08-32-NU-V-27A-24D-ML-28LP

Catalogue Section 13

Catalogue Section 04

S19-QEV

Cv 4.25

Cv 4.1

2c

2b

4b

¼" K4-(1/4NPT)-316 ½" K4-(1/2NPT)-316

BV0108F029.2TT1KLK-N

PCV-08F-08F-13-023-V

Catalogue Section 19 Configurator Catalogue Setion 26a Catalogue Section 20

7

8

9

10

11

12

Gauge

Block and Bleed Valves

Pressure Relief Valve

Cylinder Plug Valve

Mechanical Valves

SW Soldo Limit Switch Box Series

o

8a Cv 0.5 8b Cv 0.32 8a

Cv 2.4

Cv 5.1

X5 or X8

NV0308F02M5V6K NV0408F02M5V6K

S12-PR4.5

S12-CPV

Catalogue Section 03

Catalogue Section 26a

Catalogue Section 16

Catalogue Section 14

6

bifold.co.uk

BFD521 November ‘16

Cv 3.9

8b

Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.

When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.

SPR-08-08-M9-32-NU-05-V SPR-08-A08-M9-32-NU-05-V

Catalogue Section 09

Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.

SW0120E-10X23A6

Soldo Controls

is a member of the of companies

© Bifold 2016

½'' - Pneumatic Direct Acting Solenoid (Cv 2.0) - Partial Stroke

Partial Stroke

Schematic

7

4a

4a 7

6a 5

1

8

2

6b 3 4a

6c

4b

1

2

3

4

Filter Regulator

Solenoid Valves (Auto Reset)

Quick Exhaust Valve

Bug Vent / Silencer

Cv 2.6

Cyl to Exh Cv 6.5 Into Cyl Cv 8.3

Cv 2.0

2a

2c

2b

4a

4b

SH12-FR-SR-MD-10-X3

2a FP10P-SI-08-32-NU-V-77A-24D-28LP 2b FP10P-SI-08-32-NU-V-27A-24D-28LP 2c FP10P-S1-A08-32-NU-V-27A-24D-28LP

S19-QEV

¼" K4-(1/4NPT)-316 ½" K4-(1/2NPT)-316

Catalogue Section 13

Catalogue Section 04

Catalogue Section 19

Configurator

5

6

7

8

Gauge

Cylinder Plug Valves

Mechanical Valves

SW Soldo Limit Switch Box Series

¼" Cv 2.1 ½" Cv 5.1 ¾" Cv 9.8

6a

X5 or X8

Catalogue Section 03

bifold.co.uk BFD521 November ‘16

¼" CPV-04F-04F-V

6b

6c

½" S12-CPV ¾" S19-CPV

Catalogue Section 14 Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.

When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.

Cv 0.73

Cv 0.73

7a

BXS-04-04-M13-32-NU-00-V BXS-04-A04-M13-32-NU-00-V

7b

BXS-04-04-M1-32-NU-00-V BXS-04-A04-M1-32-NU-00-V

Catalogue Section 09

Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.

SW0120E-10X23A6

Soldo Controls

is a member of the

7

of companies

© Bifold 2016

¼'' to 2'' - Pneumatic Filter Booster - Circuit

Circuit

Schematic 1

¼'' Simplest / Bare Circuit

7

2

3

4a 12

4c

4a 4b

¼'' Maximum Circuit Options (Non Partial Stroke) 8

8

8 9

TO

TO

5

1

7

2

5

o

6

6

6

11

10

5

6

o

10

10 3

4

4 12

¼'' Logic Line ¼'', ½'', 1'' & 2'' Flow Line

4c

4a 4b

1

2

Filter Regulator

Solenoid Valves (Auto Reset)

Solenoid Valves (Manual Override)

3

4

5

Filter Booster

Bug Vent / Silencer

Ball Valve

o

Cv 0.6

Cv 0.7

2a

SC06-20-FR-SR-MD-10-V-X3

2b

Check Valve

2a

2c

2a FP06P-SI-04-32-NU-V-77A-24D-35 2b FP06P-SI-04-32-NU-V-27A-24D-35 2c FP06P-S1-A04-32-NU-V-27A-24D-35

Catalogue Section 13 6

¼" ½" 1" 2"

2b

¼" ½" 1" 2"

Cv 2.0 Cv 4.0 Cv 11.0 Cv 50.0

2c

Cv 2.1 Cv 4.1 Cv 12.0 Cv 50.0

4a 4b 4c

2a FP06P-SI-04-32-NU-V-77A-24D-ML-30 2b FP06P-SI-04-32-NU-V-27A-24D-ML-30 2c FP06P-S1-A04-32-NU-V-27A-24D-ML-30

Catalogue Section 04

¼" ½" 1" 2"

VBP-04-04-11-V-MD-X4-L115 VBP-08-11-V-MD-X4-L115 VBP-16-11-V-MD-X4-L115 VBP-32-11-V-MD-X4-L115

¼" K4-(1/4NPT)-316 ½" K4-(1/2NPT)-316 1" K4-(1NPT)-316

Catalogue Section 13a

Configurator

¼" ½" 1" 2"

BV0104F025TT1KLK-N BV0108F029.2TT1KLK-N BV0112F0212.5TT1KLK-N BV0116F0215TT1KLK

Catalogue Section 26a

7

8

9

10

11

12

Gauge

Block and Bleed Valves

Pressure Relief Valves

Cylinder Plug Valves

Manual ESD Valves

SW Soldo Limit Switch Box Series

o

¼" Cv 1.2 ½" Cv 4.25 1" Cv 8.6

8a Cv 0.5 8b Cv 0.32 8a

¼" PCV-04F-04F-13-023-V ½" PCV-08F-08F-13-023-V 1" PCV-16F-16F-13-023-V

X10 or X11

Cv 1.5

10a

8b

NV0304F02M5V6K NV0404F02M5V6K

bifold.co.uk

BFD521 November ‘16

Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.

When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.

Cv 0.73

10a

¼" CPV-04F-04F-V ½" S12-CPV 1" S25-CPV

S06-PR4.5

Catalogue Section 20 Catalogue Section 03 Catalogue Section 26a Catalogue Section 16

8

¼" Cv 2.1 ½" Cv 5.1 1" Cv 11.2

BXS-04-04-M9-32-NU-04-V BXS-04-A04-M9-32-NU-04-V

Catalogue Section 14 Catalogue Section 09

Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.

SW0120E-10X23A6

Soldo Controls

is a member of the of companies

© Bifold 2016

¼'' to 2'' - Pneumatic Filter Booster - Partial Stroke

Partial Stroke

Schematic

5

1

2 6a

4a

6

8

7a

4a

4a

3

8 10

9

7b 4b 4b

1

2

Filter Regulator

Solenoid Valves (Auto Reset)

Cv 0.7

2b

SC06-20-FR-SR-MD-10-V-X3

Catalogue Section 13

Catalogue Section 04

6

7

Pressure Relief Valve

Cylinder Plug Valves

7a

BFD521 November ‘16

Filter Booster

Gauge

¼" ½" 1" 2"

¼" CPV-04F-04F-V

Cv 2.0 Cv 4.0 Cv 11.0 Cv 50.0

4a

¼" ½" 1" 2"

¼" ½" 1" 2"

VBP-04-04-11-V-MD-X4-L115 VBP-08-11-V-MD-X4-L115 VBP-16-11-V-MD-X4-L115 VBP-32-11-V-MD-X4-L115

Catalogue Section 13a

K4-(1/4NPT)-316 K4-(1NPT)-316 K4-(2NPT)-316

Cv 0.73

½" S12-CPV ¾" S25-CPV

Catalogue Section 14

Catalogue Section 03

9

10

HIPEX Valve

SW Soldo Limit Switch Box Series

¼" ½" 1" 2"

Cv 0.73

8a

X10 or X11

Configurator

Mechanical Valves

7b

4b

K4-(1/2NPT)-316

8

¼" Cv 2.1 ½" Cv 5.1 1" Cv 11.2

Cv 1.5

bifold.co.uk

5

2c

2a FP06P-SI-04-32-NU-V-77A-24D-35 2b FP06P-SI-04-32-NU-V-27A-24D-35 2c FP06P-S1-A04-32-NU-V-27A-24D-35

Catalogue Section 16

4 Bug Vent / Silencer

Cv 0.6

2a

S06-PR4.5

3

Cv 2.0 Cv 4.0 Cv 11.0 Cv 50.0

8b

BXS-04-04-M13-32-NU-00-V BXS-04-A04-M13-32-NU-00-V

BXS-04-04-M1-32-NU-00-V BXS-04-A04-M1-32-NU-00-V

Catalogue Section 09

Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.

When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.

¼" ½" 1" 2"

HIPEX-04-11-V-E HIPEX-08-11-V-E HIPEX-16-11-V-E HIPEX-32-11-V-E

Catalogue Section 13b

Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.

SW0120E-10X23A6

Soldo Controls

is a member of the

9

of companies

© Bifold 2016

½"- Stacker Modular System - Circuit

Circuit

Schematic

2

2

o

o

8

8

3

3

11

PS

3

11 o

TO 8

TO

TO

4

1

To Roller Cam 3

11

8

From Roller Cam

9

6

7

4

o

10

5

5

1

5

Solenoid Valves (Auto Reset)

3

4

10

2

Filter Regulator

Solenoid Valves (Manual Override)

8

10

3 5

9

11a

3

4

5

6

Bug Vent / Silencer

Ball Valve

Check Valve

Gauge

o

Cv 0.7

Cv 0.6

2a

SH12-20-FR-SR-MD-10-V-X3

2c

2b

2c

2b

2a FP06P-SI-04-32-NU-V-77A-24D-ML-30 2a FP06P-SI-04-32-NU-V-77A-24D-35 2b FP06P-SI-04-32-NU-V-27A-24D-ML-30 2b FP06P-SI-04-32-NU-V-27A-24D-35 FP06P-S1-A04-32-NU-V -27A-24D-35 2c FP06P-S1-A04-32-NU-V-27A-24D-ML-30 2c

Catalogue Section 13

Cv 4.25

½" Cv 4.1

2a

Catalogue Section 04

K4-(1/2NPT)-316

X5 or X8

PCV-08F-08F-13-023-V

BV0108F029.2TT1KLK-N

Configurator Catalogue Section 26a Catalogue Section 20 Catalogue Section 03

7

8

9

10

11

Pilot Valve

Block and Bleed Valves

Pressure Relief Valve

Cylinder Plug Valves

Mechanical Valves o

8a Cv 0.5 8b Cv 0.32 8a

SPR-08-08-P1-32-NU-00-V

Cv 5.1

Cv 1.5

Cv 0.73

8b

NV0308F02M5V6K NV0408F02M5V6K

bifold.co.uk

BFD521 November ‘16

Cv 0.73

11a

S06-PR4.5

BXS-04-04-M3-32-NU-04-V BXS-04-04-M5-32-NU-P1-V BXS-04-A04-M3-32-NU-04-V SPR-08-08-M3-32-NU-04-V BXS-04-04-M5-52-XX-00-V

S12-CPV

Catalogue Section 09 Catalogue Section 26a Catalogue Section 16 Catalogue Section 14

10

o

Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.

When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.

Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.

Catalogue Section 09

is a member of the of companies

© Bifold 2016

Notes

bifold.co.uk BFD521 November ‘16

Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.

When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.

Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.

is a member of the

11

of companies

Š Bifold 2016

Instrument, Process, Directional Control Valves, Pumps and Actuator Electronic Control and Positioning

Accuracy of Information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.

Bifold, Bifold Fluidpower, Bifold Subsea, Marshalsea Hydraulics and Bifold Orange are all members of the Bifold Group.

Registered No. 1787729 in England.

Registered Office: Rotork House, Brassmill Lane, Bath, BA1 3JQ.

Quality Assurance All Bifold products are manufactured to a most stringent QA programme. Every care is taken at all stages of manufacture to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.

Bifold Fluidpower Ltd Bifold Group Broadgate, Oldham Broadway Business Park, Chadderton, Greater Manchester, OL9 9XA. UK.

Bifold Orange Unit 7, Cosford Business Park Central Park, Lutterworth Leicestershire LE17 4QU, UK.

Tel: +44 (0) 161 345 4777 Email: marketing@bifold.co.uk Web: bifold.co.uk

Tel: +44 (0) 161 345 4777 Email: marketing@bifold.co.uk Web: bifold.co.uk

Innovative and Reliable Valve Solutions BFD521 November ‘16

Marshalsea Hydraulics Limited Marshalsea House,Venture Way Priorswood Industrial Estate Taunton, Somerset, TA2 8DE. UK. Tel: +44 (0) 1823 331081 Fax: +44 (0) 1823 323382 Email: info@marshalsea.co.uk Web: bifold.co.uk

When selecting a product, the applicable operating system design must be considered to ensure safe use.

The products function, material compatibility, adequate ratings, correct installation, operation, and maintenance are the responsibilities of the system designer and user.

USA Office

Singapore Office

Please see the Bifold website, contact us page for the full address.

Tel: +1 (713) 304 4012 Fax: +1 (713) 783 0067 Email: marketing@bifold.co.uk Web: bifold.co.uk

Please see the Bifold website, contact us page for the full address.

Mobile: +65 98245580 Email: marketing@bifold.co.uk Web: bifold.co.uk

bifold.co.uk Š Bifold 2016