Home Designer & Architect - January 2018

HOME-DESIGNER AND ARCHITECT

MAGAZINE January 2018

®

aquariss.com The home of Quality Designer Bathrooms

+44(0)333 305 2162

This year Lathams will be featuring a number of exciting new products and range additions for 2018 and as well as its usual impactful, eye-catching stand on the ground level (208) it will also be utilising its permanent Product Specification Showroom which is located on the Gallery level of the Business Design Centre at Suite 301.

The showroom, which made an immediate impact among the architect and design community when it opened in Summer 2016, has just undergone a major re-furbishment allowing James Latham to feature an even bigger range of its panel and timber products. The suite also hosts a regular program of events including new product presentations and launches, RIBA accredited CPD seminars, networking events and training.

Chris Sutton, Managing Director of James Latham commented, “The Surface Design Show focuses on the latest trends and developments in surface solutions, connecting these materials with an audience of architects, specifiers and designers so it is the perfect platform for us.

“And with lots of exciting new products and range additions on the stand for 2018, as well as our impressive new look showroom, we’re predicting an extremely busy and successful show.”

Decospan's 2018 Nordus range will be on show

JAMES LATHAM RETURNS FOR SDS2018 James Latham returns to London’s Surface Design Show in February, where once again it will be showcasing one of the biggest and most varied collections of interior and exterior surface solutions in the UK.

As well as Latham’s highly experienced and knowledgeable team of product specialists, during the show, its A&D specification team - who are permanently based in the showroom - will be on hand to discuss the company’s extensive range of products, providing expert advice to architects and designers and helping them to keep abreast of the latest trends and developments in surface solutions.

This year, James Latham will be showing the latest range additions from supply partners including; Abet Laminati, Garnica, Egger, Kronospan, XyloCleaf, Valchromat, Accoya, LG HI-MACS, KYDEX and UPM ProFi composite decking plus an exclusive new product launch will be announced with veneer supplier Decospan.

The Surface Design Show 2018 takes place at the Business Design Centre, 52, Upper Street, Islington, London, N1 OQH between 6th-8th February 2018 – www.surfacedesignshow.com For more information on Latham’s full range of surface materials: phone 0116 257 3415, e-mail marketing@lathams.co.uk or visit www.lathamtimber.co.uk

Xylocleaf’s latest decors will also feature

Decospan’s Querkus range

James Latham will also be showing Egger’s latest collection of decors for 2018

Xylocleaf

Glass Lifting Applications for domestic & commercial projects Glass Vacuum Lifters Glazing Robots Glass Trolleys & Stillages Mini Cranes AS FEATURED ON

Mini Cranes

Vacuum Lifters

Glazing Robots

Glass Trolleys / Stillages

Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658 Email: info@hird.co.uk www.hird.co.uk

HOME-DESIGNER AND ARCHITECT

Image: JIS Europe, p40

CONTENTS January 2018 4 Editor’s Choice 14 Events 34 Heating, Ventilation and Insulation 38 Bathrooms, Washrooms and Kitchens

CONtact US Danny Callan

Publication Manager

Jenna Burridge Editor

01843 581364

danny@homedesignerandarchitect.co.uk

01843 595818

jenna@homedesignerandarchitect.co.uk

editor's choice

InventoryBase launch Version 5 of their revolutionary property inspection software Property Inspection and Inventory reporting app, InventoryBase release the latest version of their software.

The following features have been added: 1. Enhanced Performance 2. Embedded Photos 3. Improved Dictation 4. Templates 5. Built-in GPS 6. New Add-Item Menu 7. Improved Navigation

C

loud-based property inspection app, InventoryBase have now officially launched version 5 of their market leading property inspection software. Following feedback from users, the developers at InventoryBase have been working hard to provide lots of new features to improve the experience and functionality of the app.

Version 5 of InventoryBase is their best update yet, combining written notes, checklists, high quality photos and audio dictation into one flawless app.

The latest version allows the user to tap shortcuts to fill in common descriptions and sentences or pick from the auto-text dictionary, while you type up detailed reports on-site faster than ever before.

Steve Rad, Managing Director of InventoryBase said:

“We’re really excited to be able to share InventoryBase Version 5 with both existing and new customers. We Prefer to dictate? Hit record and have taken feedback from continue to flag notes or take photos, Inventory Clerks and Property pause and continue audio recordings Inspectors around the country and upload to transcribe online using and used this to develop the built-in audio playback tools. and improve the app for all users. We are continuing with You can also take multiple photos further development and will back to back or switch to the HDR be launching InventoryBase camera to get the highest quality version 5.1 within the coming images. months.”

InventoryBase V5 is now live and can be downloaded directly from the App Store or Google Play.

For more information on InventoryBase and to start a free 14 day trial, visit www.inventorybase.com

•4•

0800 7833 228 sales@fireretardantuk.com HRPROF is manufactured and approved to ISO 9001-2008

HR PROF THE ECO-FRIENDLY FIRE RETARDANT · Water based - does not leach · Allows wood to breathe naturally · Internal/external application · Colourless - Odourless · EN 13501 - 1 · Non Toxic - No Solvents · BS 476 part 6 & BS 476 part 7 · Euro-class B-s1-d0 and C-s1-d0 · BM TRADA ISO 9001 Certificate · Meets the highest EU standards

No HR Prof

With HR Prof

Classification Reports & Certificates; Pine, Spruce, Scots/Siberian Larch, West Red Cedar, Oak & More

www.fireretardantuk.com 0800 7833 228 sales@fireretardantuk.com

®

Supplying a wide range of Modern & Traditional Style Cast Iron Radiators for Electric installation or Central Heating Systems

Bohemia Retro

Styl

All Heatec Electric Radiators are Fitted with Room Temperature Thermostat Control or Fixed Temperature Controls

Imperial Victorian

Cast Iron Heights available from 430mm – 980mm. Outputs from 550 - 3000 Watts. All Radiators Manufactured in the EU

SUPPLIER TO THE NATIONAL TRUST & M.O.D

Also supplying High Efficiency Aluminium Radiators and Towel Rails Electric Radiator Thermostatic Control

Towel Rail

Forte Plus

Forte Plus Aluminium Radiators low liquid content and intelligent design give up to 40% energy savings against conventional Radiators.

Available Heights 431mm – 881mm, Outputs 550 – 3000 Watts.

Any RAL colours. Low level Finn (Trench) Radiators also available Full Catalogue available on request Heatec, Stoneygate Close, Gateshead, Tyne & Wear. NE10 0AZ Tel: 0845 8726667 sales@heatecev.com www.heatecev.com

Editor's choice

V4 Woodflooring takes steps to improve how retailers and consumers experience its products UK wood floor specialist, V4 Woodflooring, is gearing up to an exciting 2018 with a host of product and marketing advances that will be a step-change in how the company interacts with its customers.

A refreshed brand, new website, improved retailer displays and the opening of V4 World, alongside the introduction of new wood floor collections, are set to ensure the company continues to be at the forefront in delivering high quality wood floor and wall products for discerning homeowners and professionals.

A refreshed brand identity is driven by the core value to Bring Nature Inside. The company will continue to pride itself on offering real wood collections produced from the highest quality woods, sustainably sourced and finished using natural colouring techniques and surface finishes.

With the ever increasing range of styles, and listening to retailer feedback, it is about to roll out new display stands for key retailers, offering larger sample sizes for customers to view when visiting V4 retailers.

Chris Vincent, Managing Director explains, “Listening to retailer feedback there was a definite demand to introduce improved display material for their stores, which would enable them to show customers larger samples of our wood floor collections in a more impactful way. We have designed our new stands to showcase all of our ranges with easily accessible larger sample sizes, combined with a more engaging brand and information output.

“Initial feedback has been really positive and we are looking forward to rolling out the new stands to interested retailers. We are aiming to create a modular approach as not all stores will have the space for the full stand and we will work closely with retailers to deliver a solution that works best for them and their investment.”

V4 also focuses on driving awareness of its products through its website, allowing customers to see the products available then locate their nearest retailer to visit and discuss specific requirements.

Enhancing this experience a new website will launch in the New Year that will provide customers with an improved user experience and more interactive way to discover the collections and identify products that might be right for them.

Chris says, “To a certain degree, gone are the days of hard copy brochures and the online experience is the most important first step in the buying process. Consumers want to research online and an easy and informative website experience is essential.

“The new web site will not only be aimed at allowing users to view our products, but will also provide inspiration and design advice. A new search function will make it simpler to shortlist products that are best suited to buyers’ styles and budgets, and we will continue to showcase real life installations so our products can be seen in finished settings.”

With these exciting changes in place early in the New Year, later in the year will see the opening of the first V4 World, a unique, design-led space where visitors will be able to experience V4’s contemporary floor and wall products in a brand new way.

Situated adjacent to V4’s Head Quarters in Woking, Surrey, the showroom will bring together a myriad of design experiences for visitors. With room sets, virtual technology, large product displays and a café, the showroom will be a design destination for the discerning home and commercial designer.

For V4 retailers located across the UK, it will also be an extended showroom, enabling them to send their key customers to the centre to see products in the large room-sets and on virtual displays before placing an order.

Chris explains, “V4 World has been in the making for a few years and construction is now well under way on what is a £3m investment for us. It will be a state of the art design centre which will not only showcase our innovative range of flooring and wall products, but bring them to life in a space where people can experience them like never before.

“All of the steps we are taking over the coming months are about us responding to the changing needs of the flooring industry, design professionals and consumers. Interaction and experience throughout the design and buying process is more important than ever, and we want to ensure we are supporting our retailers to be able to give the best possible customer experience, and offer professionals and consumers choice in how they can discover and select the best products for their needs.”

•7•

editor's choice

Creating a bright, light new space for South Devon Listed property The clients of this project, like many, wanted to create a better, more practical kitchen-dining space for everyday family life and for entertaining friends in their Listed property based in South Devon.

A single storey rear portion of the building (dating to around the 1940s) was home to the existing kitchen, small utility and dining space. These spaces were divided by walls, changes in level and a large fireplace.

Through discussion and negotiation with the local planning authority a preferred option was granted permission to remove the chimney, the stack and internal walls. This opened up the area for a kitchen diner space more suited to current lifestyles.

Careful development with the architect Tom Spriggs, along with the structural engineer and contractors throughout the process opened up the roof structure to provide height and daylight to the long space. The kitchen layout was developed to make the most of the level change in the building.

A large existing window was knocked open into double doors and a new lowered patio area formed at the same level as the house. The resulting space is a generous entertaining space that is also hugely practical for their young family and developing garden.

To maximise the light entering the new space the client installed three Lumen Conservation Heritage HR4 rooflights, with fixed casements. These were supplied with the additional protection of a coastal paint finish to protect them from the environment in which the property is situated.

The low profile design of the Lumen Heritage rooflights satisfied the Building Conservation officers and ensured the external aesthetics of the property remained in-keeping with the original building.

The exceptional quality of the Heritage rooflight, with its American Ash interior lining and high specification Pilkington glazing, also provides a stunning finish to the fabulous new space.

“The rooflights look great, and we are really pleased with the results. The technical team who helped advise the project were also invaluable as we were installing in a very shallow pitched roof.”

Tom Spriggs, Architect.

“The flush fitting Lumen Heritage rooflight replicates a traditional Victorian design which is ideal for period properties, listed buildings and barn conversions. These rooflights, like all Lumen products, were designed and manufactured bespoke to suit the clients exact requirements.”

Paul Trace, Lumen Rooflight.

For further information visit www.lumenrooflight.com

•8•

Planting Trees gives Peace, Beauty & Life to our Landscape & the Environment

Established in 1999, Trees Direct is a family run business in Shropshire. We supply quality trees and shrubs to designers, councils, contractors and educational trusts, together with plantings for country estates and co-ordinating with companies wanting environmentally friendly corporate gifts. Always caring to preserve the environment and wildlife we keep many of our trees and shrubs on site while working with leading reputable suppliers both in the UK and abroad.

Trees Direct specializes in sourcing trees and shrubs with suggestions, ideas and plans for those who do not have the time, contacts or knowledge to organise plantings. We have co-ordinated and put together many plantings and are proud to have worked with The Woodland Trust, The Elm Conservation Foundation, The Royal Institute and many other Wild Life Trusts. We have been involved in many wonderful regeneration projects which are able to combine commercial ventures while helping to protect the environment both for humans and our precious wildlife.

We are aware that every project is important to the client and our participation calls for commitment. Therefore we are always available on the phone to discuss and advise our clients with help on plans and suitability before commencement of projects to ensure total satisfaction in our service. We are as happy to help source that one special tree as to working with clients for large plantings. However small or large the job, we are here to guide, advise, plan and deliver.

www.treesdirect.co.uk | Email info@treesdirect.co.uk | Tel: 01584 878878 Trees Direct Ltd, Priors Halton House, Priors Halton, Nr. Ludlow, Shropshire SY8 2JN Vat No 709535032 Registered in England No 3511297

Metal Sheets Ltd

Tel: 0151 526 4777 Email: Sales@MetalSheets.co.uk www.metalsheets.co.uk Metal Sheets Limited, Unit 4, Yakira Buildings, 83 Sefton Lane, Maghull, Liverpool L31 8BU

editor's choice

The InSinkErator® 3N1 steaming hot water tap saves worktop space and is available in a range of on-trend metallic finishes

De-Clutter the Kitchen ® With Insinkerator Steaming hot water taps from InSinkErator® provide the perfect kitchen companion as they de-clutter work surfaces and are available in a range of on-trend metallic finishes.

Research has shown that the footprint of new homes has significantly decreased, 958 square foot in 2016 compared to 1,055 square foot in 20031, meaning consumers have less space in the kitchen for appliances to sit on the work surface. By casting out the kettle and replacing the standard mixer tap with a steaming hot water tap, such as the InSinkErator® 3N1, the consumer can gain maximum functionality without taking up any additional counter-top space.

The InSinkErator® 3N1 steaming hot water tap offers total convenience with instant access to filtered, steaming hot water, alongside regular hot and cold options, encased within a stylish one-piece Italian design. The 3N1 completely eliminates the time and energy lost waiting for the kettle to boil, while the versatility to switch to hot and cold water within the same fixture contributes to countless other tasks, from cooking to cleaning.

•12•

What’s more, the WRAS approved steaming hot water tap is available in a number of different finishes and two different shapes, L and J, which complement a number of different décor styles.

The J Shape is available in Brushed Steel, Polished Chrome and Rose Gold. The L Shape is available in Anthracite, Brushed Steel, Polished Chrome, Satin Black and the award winning, Brushed Gold.

Kevin Carr, UK Sales Director, InSinkErator® says: “Whether users are making a simple cup of tea, blanching vegetables or rinsing rice, a steaming hot water tap saves time and water waste. What’s more, valuable worktop space is saved by ditching the kettle and installing a steaming hot water tap.”

For more information on steaming hot water taps from InSinkErator®, consult your Account Manager or visit the website at www.insinkerator.co.uk

KitchenAid Tel: 0800 151 0908 www.kitchenaid.co.uk

THE AWARD WINNING KITCHENAID BLACK STAINLESS STEEL RANGE KitchenAid appliances are the perfect expression of professional performance, artisan quality and iconic design, which support those who are serious about food and place expert cooking techniques into the hands of the home chef.

Stainless steel is synonymous with the professional kitchen as it is functional, reliable and striking. KitchenAid brings the professional kitchen into the home, modernising and transforming stainless steel through the recent launch of the award winning KitchenAid Black Stainless Steel range of premium built-in cooking appliances.

The KitchenAid Black Stainless Steel collection of premium appliances is the UK’s first full range of major appliances that is entirely finished in black stainless steel. The appliances feature timeless design, with bold features and refined geometry, to deliver a distinctive addition to the kitchen. The pure black stainless steel is hand-brushed for a warm, iconic and contemporary appearance. The range is also finished with an exceptional anti-fingerprint technology, which is an innovative treatment that protects from marks and fingerprints.

The collection of Black Stainless Steel appliances includes an evolution of the famed KitchenAid Twelix Artisan oven (KOASPB 60600), which provides the user with the most flexible and advanced cooking technology.

The Black Stainless Steel Twelix Artisan oven is a highly refined convection oven, which provides three cooking methods that produce professionally-driven results; Twelix convection, forced air with steam and pure steam.

The exclusive KitchenAid Twelix convection system offers a level of cooking performance previously only achieved in professional kitchens.

Twelix technology delivers precise airflow and heat distribution throughout the oven thanks to innovative engineering and the enhanced internal design.

Twelix technology encompasses two independent semi-circular heating elements, the Tweli-base and Tweli-grill, which can be operated together or independently for flawless browning on top and perfectly baked bases, meaning that the Twelix Artisan oven produces the best and most even heat distribution in any oven on the market.

The Black Stainless Steel collection also includes a 450 mm speed oven (KOCCXB 45600), a combination steamer oven (KOQCXB 45600), a combination microwave oven (KMQCXB 45600) and a 140 mm warming drawer (KWXXXB 14600).

Every aspect of KitchenAid appliances is crafted and refined to offer the user an unmatched feel and experience, featuring advanced cooking technology to produce professionally-driven results. The award winning Black Stainless Steel collection is characterised by a myriad of details that make it truly unique, and feeds passion and creativity in the kitchen.

•13•

events

Vision 2018 set to be bigger and better than ever before – now at the Business Design Centre in the heart of London’s design community Vision is the event for Architects, Technologists, Designers, Developers, Specifiers and their clients. Celebrating design, specification and product innovation in creating smarter buildings and better places Join CR Laurence, Nudura, Arbor Forest Products, Belgian Luxembourg Chamber Of Commerce and Aproplan amongst others....

Now in its fourth year, Vision has become an essential resource for thousands of Architects, Technologists, Designers, Specifiers and their clients working on live projects in health, education, retail and commercial building.

Ambitious plans are in place to grow the exhibition and extend Vision’s Educational Programme, whose illustrious supporters include the RIBA, BRE, New London Architecture & the London

•14•

Festival of Architecture. Vision will once again play host to over 160 international industry experts to deliver another highly acclaimed seminar programme.

With exhibition space filling up fast, now is the time to book your stand - so take advantage of the early booking rate and secure your ideal location by contacting the sales team today on 0203 409 0623. You can also download the 2018 sales brochure by clicking here You can enquire online to exhibit at Vision 2018 here and we will contact you with further details.

the future of the built environment 21-22 june business design centre london

Events

SBID and BITA Partner The January Furniture Show

TITLE HERE

Two prestigious interior design associations - SBID (Society of British Interior Design) and BITA (British Interiors & Textile Association) will partner with the January Furniture Show in 2018 which runs from 21st to s here mainNEC. text goes here main text goes here main 24th January at Birmingham’s

T

text goesthehere main text goes here main text goes here he partnerships will strengthen links between the show and the interior design sector andgoes make ithere more inclusive main text maintotext goes here main text goes the whole of the UK furniture industry. Over 5000 visitors here as main textarea goes here at the 2017 event put interiors their main of interest at main text goes here main text the show. Contract buyers fromhere the interior design and goes hospitality goes main text here main text goes here main sectors increasingly use the show to source everything from wall textupholstery goes here main text goes here main text goes here art to mattresses, statement and soft furnishings.

SBID members will be able to enjoy a hosted coffee lounge in Hall 2 and attending counts towards their CPD accreditation. SBID main text goes mainteam text goes here main text goes here President-Elect Diana Celella, will again be part of thehere judging main text goes here main text goes here main text goes here for the product focused Furniture Awards; which are judged on the main text goes here main text goes here main text goes here opening day of the event. main text goes here main text goes here main text goes here The original Fabric Pavilion is being extended and rebranded as text the goes here main text goes here main text goes here main Fabrics and Soft Furnishings Pavilion and feature a new layout mainwill text goes here main text goes here main text goes here and new exhibitors. There will also be main a first-time show partnership text goes here main text goes here main text goes here with leading textile association, BITA (British Interiors & Textile main text goes here main text goes here main text goes here Association) who will have a stand at the mainshow. text goes here main text goes here main text goes here mainfabric text goes here main text goes here main text goes here In the line-up for 2018 will be established houses, main text goes here mainKobe text goes here main text goes here distributors and agents including returning January exhibitors main text goes here main and Warwick and new exhibitors Quantum Textiles, FibreGuard text goes here main text goes here main goes here main text and JLS Fabric Designers who will offer softtext furnishing services, as goes here main text goes here main text goes here main text goes here main text goes here well as fabric and textile choices. main text goes here main text goes here main text goes here Canadian based Quantum Textiles specialise in commercial and text goes here main text goes here main text goes here main residential window coverings. JLS Fabric Designers are the UK text goes here main text goes here main text goes here main suppliers of French company Thevenon’s luxury printed and woven main text goes here main text goes here main text goes here fabrics, as well as creating their own individual trimmings and main text goes here main text goes here main text goes here bespoke designs for custom projects. main Belgium’s FibreGuard text goes here main text goes here main text goes here main text goes is known throughout the world as a specialist in stain here free main fabrictext goes here main text goes here main text goes here main technology, as well as a producer of a varied selection of long text goes here main text goes here main text goes here main text goes here main text goes here lasting and easy to clean fabrics. main text goes here main text goes here main text goes here Luxury fabric producer, Kobe returns to show designer main textnew goes here main text goes here main text goes here collections. With comprehensive experience in both main text goesdomestic here mainand text goes here main text goes here commercial installations, they will show co-ordinating collections of goes here main text goes here main text goes here main text soft furnishing and upholstery fabrics.main text goes here main text goes here main text goes here Joining them will be the Mark Wilkins Agency who is the UK supplier of several high-end European fabric producers including Panaz, Guell Lamadrid and Les Creations de la Maison.

Commenting on exhibiting at JFS Mark Wilkins said, “We judge the opportunity of directly working alongside the furniture manufacturers who use our fabrics, and then presenting them to the visiting retailers and interior designers as one not to be missed.”

For full exhibitor information and to register your attendance, please go to www.januaryfurnitureshow.com

•16•

JFS 2018 logo_venue/dates whiteout

Find all the furniture and interiors you need as 500+ suppliers reveal their new collections. We’ll see you in January.

Register now at januaryfurnitureshow.com

Events

January Furniture Show is trailblazer for new technology January Furniture Show 2018 paves the way for contactless event technology. The show, which runs from 21st to 24th January 2018 at Birmingham’s NEC, will be the largest event by a UK organiser to use Poken.

P

oken is quick and easy information and lead generation.

Visitors will receive a Smart Badge as they enter the show, which allows them to collect exhibitor information. There will be Touchpoints on all exhibitor stands, which contain exhibitor information such as contact details and brochures.

To collect this information, visitors tap their Smart Badge on the Touchpoint – simple! Even if a stand is busy, Poken ensures that visitors and exhibitors don’t miss a crucial contact.

Visitors will receive a summary email at the end of each day that details all the information they have collected, and the stands they have visited. Poken also allows exhibitors to see who is tapping on their Touchpoints in real time, so they no longer have to worry about missing buyers they want to see.

Poken is completely secure as no personal data is recorded or transmitted, and it’s eco-friendly as brochures and information can be sent electronically, saving printing as well as carrying.

Laraine Janes, Event Director, said “this is a massive investment for the show and both exhibitors and visitors will reap the benefits this new technology will bring”. The system is a major advancement in event technology, and the January Furniture Show organisers are very excited about its introduction at the show. www.januaryfurnitureshow.com

•18•

events

Naidex 2018 registration is now open!

We are pleased to announce Europe’s most exciting disability event will return to the NEC Birmingham on the 25th & 26th April for an incredible (and unrecognisable!) 44th edition.

With an increased floor plan of 300 international exhibitors, a comprehensive agenda of 200 fully CPD accredited seminars, 1-2-1 advice, live demos, and new interactive features dedicated to independent living, Naidex 2018 is unlike anything you’ve ever seen before - and it’s free!

latest technologies, ideas and adaptations created to promote and enhance ease, comfort, style and ultimately independence.

In 2018, Naidex will proudly host the Home, Design & Build Summit for the very first time, bringing together industry leaders and key decision makers in accessible architecture, the most innovative furnishing solutions and stylish interior design for accessible living. The summit is a complete exploration of the built environment in terms of accessibility.

This a unique opportunity for visitors and exhibitors to interact and consider an area that is becoming increasingly significant in modern society.

It promises to feature revolutionary seminars and pioneering suppliers that will demonstrate and examine the very

The summit will largely focus on funding, grants and financial support, planning and surveying, care home development, accessible real estate, Government housing strategy and contemporary design trends.

Speakers in the Home, Design & Build Summit include: • Paul Smith - Director of Foundations • Elaine Hollerhead - Founder of DESIGNATE • William McMorran & Roland McMorran Founders of Architectonicus

Exhibitors in the Home, Design & Build Summit include: • Geberit • RAM Mounts UK • Sensory Guru • Safespaces … and many more!

These exhibitors are just a snapshot of the calibre of suppliers that will be at Naidex next year. With 300 to choose from, Naidex is the hub of the accessible designs for independent living.

To register for your free ticket to attend Naidex, click here. For sponsorship and exhibiting enquiries contact paige.lewin@prysmgroup.co.uk or call 01179902092

•19•

events

Surface Design Show 2018 – the best in new and innovative surfaces

From 6 - 8 February 2018 Surface Design Show returns to London’s Business Design Centre, showcasing the newest and best surfaces that the design industry has to offer. Connecting innovative and exciting materials with an audience of architects, specifiers and designers, Surface Design Show is the only event in the UK that focuses solely on interior and exterior surfaces.

For more than ten years Surface Design Show has been the place where industry people immerse themselves in the latest materials for the built environment, gain new insights and network with like-minded designers, architects and suppliers.

From exquisite hand crafted surfaces to the latest technological advances in architectural lighting, over 170 exhibitors will highlight the very best in surface design.

Returning exhibitors include V4 Wood Flooring, Rimex Metals and Grestec Tiles who will be launching Graficco porcelain tiles which takes inspiration from the architectural grid style. The collection is available in a total of 29 stunning neutral and vibrant shades. Whilst new exhibitors include Bolton Textiles, Daedalian Glass and SoundSpace who design creative acoustics.

•20•

Surface Design Show 2018 will once again have a packed programme of events all designed to inspire and engage.

Some of the events that included will be the Opening Night Debate. Organised in association with the Royal Institute of British Architects (RIBA) and New London Architecture (NLA), it will highlight the issues facing young Londoners as they seek to become home owners. RIBA President Ben Derbyshire will lead a panel of experts debating the topic “A crisis for the next generation – is London just for the wealthy?” Peter Murray, Chairman & Co-Founder of NLA will chair the event which takes place from 6.30pm until 7.30pm on Tues 6 Feb. The ever popular PechaKucha Evening – Hosted by Phil Coffey of Coffey Architects takes place on Wednesday 8 Feb at 6.30pm. An informal and fun presentation

of inspirational slides, the confirmed line-up includes Hannah Czorlett, David Kohn and Jessica Reynolds.

The Show will have a focus in 2018 on the Residential and Transport sectors.

TV Presenter Naomi Cleaver will host -‘Every dream home: materiality and the democracy of ideas’ with speakers Giacomo Ribolla of Johnson Ribolla, Carl Turner from Carl Turner Architects and Meriel Scott from Precious McBane.

In line with the Transport focus, Theresa Dowling editor of FX Magazine, will host – ‘Trainspotting; is transport design the most challenging of all the design sectors?’ with Paul Priestman from Priestman Goode, Julian Maynard from Maynard-Design, Terry McGillicuddy from Richmond International and Mark Gutjahr of BASF Coatings.

events Surface Spotlight Live, which debuted in 2016, is an exciting opportunity for architects and designers to discover the newest and best materials in the industry.

The 2018 display will be collectively curated by trend expert Sally Angharad, Treniq an international interiors network and Colour Hive who forecast trends and colours.

Colour Hive, creators of Mix Magazine, will present a trend cluster featuring surface materials and colours for spring/summer 2019; Disrupt, Drift, Hush and Worth.

Debuting in 2017, Stone Gallery reflects the rapidly growing stone market in the UK and the important relationship between stone and surface design. Officially supported by Stone Federation GB, the first Stone Gallery attracted exhibitors from Europe and beyond all looking to link up with the international architects and designers that make London the worlds’ design hub.

Now in its fifth year Light School presented

by The Light Collective and supported by the Institution of Lighting Professionals, is the home of architectural lighting and allows architects and designers to touch, compare and learn about innovative lighting and technology products.

Confirmed exhibitors from 2017 include Optelma, Evans Turner and Applelec whilst new exhibitors include F-Light and Pixalux.

Mark Ridler of BDP commented on the 2017 show: “Great opportunity to evangelise lighting to the architectural design community. This show has great reach – it’s a pleasure to be involved”.

Light Talks, a key element of Light School, consists of presentations and hands-on

demonstrations with top UK lighting designers taking on the role of lecturers.

Last year’s talks included such varied topics as How light paints surfaces – Benz Rooz, Spiers and Major, Human Centric Lighting: The myths and the reality – Mark Ridler, BDP and Blobs, Scallops and Glowing Things: serving up the language of light from the depths of the ocean – Stuart Alexander, Michael Grubb Studio. Over 400 architects and designers attended Light Talks in 2017. Light School 2018 is set to exceed previous years with the programme of talks providing the audience with access to many of the UK’s leading lighting designers such as Arup, Lighting Design International and Nulty+. Lighting professionals confirmed for 2018 include Rebecca Weir from Light IQ, Christopher Knowlton of 18 degrees and Theo Paradise-Hirst from Chapman BDSP.

Sally Storey from Lighting Design International said of her talk: “Every seat was full, people standing outside the door – great turnout! Interesting questions showing the audience benefited and were engaged”.

On the third day of the show, Thursday 8 February, the Surface Design Awards will take place. The awards recognise and celebrate outstanding examples of progressive design and the use of innovative surfaces in projects both in the UK and internationally. Divided into interior and exterior categories there are 13 awards across 7 different categories, each project is judged on a range of criteria including the type of surface, the use of materials and aesthetic design.

Registration to attend the show is now live.

www.surfacedesignshow.com

•21•

Growth of manufacturer recognised at national design impact awards Sealant and adhesive manufacturer Polyseam has achieved the ultimate design accolade for the rebrand of its GRAFT product range.

Aston Martin; Josh Berger, president and managing director of Warner Bros; and renowned entrepreneur Deborah Meaden.

The Yorkshire-headquartered company and its branding agency The Engine Room were both presented with a gold design impact trophy at the glittering DBA Design Effectiveness Awards in London.

But the GRAFT project also went on to scoop the ultimate recognition of the evening when it was announced as the Grand Prix winner of winners at the end of the night.

Since GRAFT’s launch in 2014, annual sales have increased by a staggering 744% and export levels have risen by more than £1million. In fact, this transformational business exercise has played a significant part in Polyseam now building a 50,000sqm factory which is expected to create a further 50 jobs by 2020.

It was this bottom line impact that impressed the line-up of high-profile judges, which included Andy Palmer, CEO of

•22•

Commenting on the win, Polyseam’s marketing manager Olando Salina said: “The evolving challenges in the manufacturing market mean we must continually innovate to drive growth. We therefore focused on the development of an environmentally friendly, all-in-one adhesive and sealant created using our own in-house expertise.

“This high-performance technology was already award-winning in its own right. But it didn’t achieve the traction we sought, which is why we engaged The Engine Room to help clarify our market position, overhaul the branding of this product range, and craft the communication materials we’d need moving forward. The Engine Room team has specific expertise in this field, and we were therefore delighted

when GRAFT was ‘born’. The project success is a testament to the collaboration of these forward-thinking business and design brains.”

The Engine Room’s managing director Lesley Gulliver added: “The building, construction and manufacturing sectors are perhaps not renowned for their design prowess. But this project goes to show that strategic creative thinking is about much more than just what looks good.

The overhaul of this product range and the development of the GRAFT brand has helped to revolutionise Polyseam’s entire business.”

Polyseam has been independently manufacturing first-class brands for the majority of the world’s leading suppliers since 1993. The company manufactures more than 150 different products, and exports to 21 countries globally.

For more details visit www.graft.co.uk

NEW Emission Free, Fire Retardant paint for walls, ceilings and wood.

You

PROTECTING & THE ENVIRONMENT

01484 421036 l www.graft.co.uk l

/GraftSealants l

Developed & manufactured in the UK by POLYSEAM LTD.

@GraftSealants

Fire Resistant Glazing Tapes

NEW range

Sealmaster Intumescent Foam Glazing Tape Sealmaster Fireglaze Tape Sealmaster Black Glazing Tape ISL 60 Plus Glazing Tape

0

30

60

90

120

Time / mins

Sealmaster Intumescent Foam Glazing Tape • 30 and 60 minutes applications in timber • Fully Certifire Approved - CF 5387

Sealmaster Fireglaze Tape • 60 and 90 minutes applications in timber • Fully Certifire Approved - CF 5428

Sealmaster Black Glazing Tape • 30 to 120 minutes applications in timber and steel • Fully Certifire Approved

ISL 60 Plus Glazing Tape • 60 to 120 minutes applications in timber and steel • 60 and 90 minute fire test reports available

Sealmaster, Brewery Road, Pampisford, Cambridge, CB22 3HG, England Phone: 01223 832851 Fax: 01223 837215 Email: info@sealmaster.co.uk Made in the UK

Part of the Dixon International Group Ltd

www.dig.co.uk

Black Glazing Tape

The Product: Sealmaster Intumescent Foam Glazing Tape is a black, low-medium pressure intumescent foam glazing tape available on a roll. It has a volume expansion up to 4 times and has excellent high temperature and thermal erosion resistance up to 900°C. It is very flexible and highly compressible giving a professional glazed finish appearance.

The Product: Sealmaster Black Glazing Tape is a non-ceramic fibre glazing tape which is available on a roll. It has excellent high temperature insulation properties and is compressible giving a professional glazed finish appearance. It is very easy to install by cutting to size to fit on glazing beads.

Applications: • Glazed apertures in timber door and screens – 30 and 60 minute integrity / insulation applications • For fire rated toughened glass and also wired glass in timber doors and screens – 30 mins integrity only applications

Applications: • Glazed apertures in timber doors and screens – 30 to 120 mins integrity / insulation (depending on FR glazing type) • Glazed apertures in steel doors and screens – 30 to 120 mins integrity / insulation (depending on FR glazing type)

Sizes: 10mm x 5mm, 15mm x 5mm & 20mm x 5mm as standard.

Available on 20 metre rolls.

Sizes: Thicknesses: 2mm, 3mm and 4mm and Widths: 10mm, 12mm, 15mm and 20mm. Other widths / thicknesses available on request.

Available on 10 metre rolls.

Fireglaze Tape

ISL 60 Plus Glazing Tape

The Product: Sealmaster Fireglaze Tape dry glazing system is a medium pressure intumescent strip with a volume expansion of up to 10 times producing a char with an excellent high temperature & thermal erosion resistance up to 1000°C. It is flexible and due to its high temperature durability can be used in a wide range of fire resistant glazing applications including as a glazed aperture liner.

The Product: ISL 60 Plus Glazing Tape is an intumescent, non-ceramic fibre glazing tape which is available on a roll. It has excellent high temperature insulation properties and a medium pressure intumescence up to 3 times in volume. It is compressible giving a professional glazed finish appearance and is very easy to install by cutting to size to fit on glazing beads.

Applications: • Glazed apertures in timber doors and screens – 60 and 90 mins integrity / insulation applications • Fire rated composite door systems – 30 mins integrity / insulation IGU applications

Applications: • Glazed apertures in both timber and steel doors and screens – 60, 90 and 120 mins integrity / insulation applications • For fire rated toughened glass in timber / steel systems – 60 mins integrity only applications

Sizes: 10mm to 130mm width x 2.5mm thickness x 2100mm length.

Sizes: 15mm x 5mm and 20mm x 5mm as standard, 4mm thickness on request. Available on 10 metre rolls.

Design, Innovation & Manufacture since 1962

Sealmaster, Brewery Road, Pampisford, Cambridge, CB22 3HG, England Phone: 01223 832851 Fax: 01223 837215 Email: info@sealmaster.co.uk Made in the UK

Part of the Dixon International Group Ltd

www.dig.co.uk

5331 www.redgraphic.co.uk

Intumescent Foam Glazing Tape

O

wned and organised by Wendy Adams for the past five years, the show has undergone a period of regeneration and growth under her management and is now gearing up for its 2018 edition, which will run on 16-18 September at the Harrogate Convention Centre.

Ocean Media Group Buys The Flooring Show The Flooring Show, the UK’s national flooring event, which marked its 55th edition this year, has been purchased by Ocean Media Group, a leading provider of exhibitions, events, awards and specialist publications.

The Flooring Show is the biggest event in the industry’s calendar.

It brings together the retail and contract sectors and key industry bodies such as the Contract Flooring Association, the National Institute of Carpet & Floorlayers and the Flooring Industry Training Association. It is widely recognised as a key sales and networking event for the industry and all the Associations have pledged their continued support for the show and its new owners.

Wendy Adams commented, “The Flooring Show is a great event which will benefit from being part of such a well-respected organiser.

Ocean Media’s forward-thinking leadership, proven experience and extensive resources will allow us to maximise the potential of the show.”

From Ocean Media Group, managing director, Tim Willoughby says, “The Flooring Show, with its long heritage in the industry, is well supported by suppliers and retailers and it will be our job to ensure the show remains relevant and deserving of that support.”

“Ocean Media has a strong history of developing specialist events, and we’re delighted to welcome the Flooring Show into our portfolio.

With Wendy and her team remaining in place to work with us on the 2018 show and beyond, we are confident all involved will benefit from this new arrangement and we will deliver a seamless transition over the coming year.”

The 2018 Flooring Show (www.theflooringshow.com) will take place at the Harrogate Convention Centre from 16 – 18 September.

•26•

Don’t allow subfloor moisture to delay occupation Fast-track solutions for damp or contaminated floors.

• Use the affordable Protimeter Aquant™ to quickly indicate whether a full test for moisture is required.

• Measure the relative humidity (RH) of the subfloor using the Digital Hydrometer to determine exactly what solution is required.

• Specify one of the F.Ball range of market-leading Stopgap waterproof surface membranes or loose-lay isolator membrane.

Trust in F.Ball for fast, reliable solutions for your subfloor moisture problems.

F. Ball and Co. Ltd.

Tel: 01538 361 633 • email: mail@f-ball.co.uk • web: www.f-ball.co.uk Station Road, Cheddleton, Leek, Staffordshire, ST13 7RS, UK

GREAT BRITISH INNOVATION

Norcros Adhesives Relaunches its 4 into 1 Grout Range with New Formulations and Colours Norcros Adhesives is relaunching its successful 4 into 1 grout range with new improved formulations, new colours, packaging and marketing support.

The Norcros 4 into 1 Grouts & Sealants range has established itself in recent years as one of the leading ranges on the market, known for technical excellence and ease of use, so the relaunch will be of considerable interest both to fixers and distributors.

The new products have been reformulated to be both efflorescence-resistant and water-repellant. Efflorescence is the movement of salts towards the surface of a porous material, generally the grout lines, where it can leave an unsightly deposit. In some tiling installations this can be a real problem which negatively affects the aesthetic appearance of a tiled surface.

The formulation also contains Norcros Stop Mould Antibacterial additives to protect against mould and discolouration, which can occur in areas which will be subject to moisture or high humidity. The grouts can be used either internally or externally and in permanently immersed locations such as swimming pools.

They are suitable for use with all types of wall and floor tiles, including natural stone, especially where a narrow fine-textured joint is required. The new grouts have a high flexural strength, meaning they are suitable for use in areas where limited background movement or vibration can occur, such as in heated floors or where tiling has been applied to wooden flooring. They are also suitable for use in wider joint applications of up to 12mm.

The new range has been considerably expanded and now includes a total of 15 colours, reflecting current tile trends, in particular the escalating popularity of wood effect tiles. Norcros Adhesives has added four new colours to the 4 into 1 Grouts range. These are specifically designed to complement the new generation of modern tiles. The colours have been formulated so that they now match the existing successful Norcros Flexible Wide Joint grout range.

To assist specifiers and architects at the design stage, the colours of the new range can also now be quoted as RAL numbers. Autumn Chestnut, Forest

•28•

Acorn, Tropical Ebony and Rustic Cedar are the new colours joining the range. The remaining colours which formed part of the previous range have all been reformulated, repackaged and mostly renamed. The new names are Arctic White, Oxford Stone, Golden Jasmine, Cornish Cream, Blanched Almond, Sandy Beach, Silver Grey, Steel Grey, Slate Grey, Midnight Coal and Coffee Bean.

“With this exciting new range, we have sought to address two key issues,” says Mandy Searle, technical services manager at Norcros Adhesives.

“Firstly the issue of efflorescence, which can be an unsightly problem for fixers, for which we believe we have provided a solution by implementing a technical enhancement of the product. Secondly we have addressed the need to match our grouts to the latest fashion trends in the tiling market.”

The new 4 into 1 grouts are available in 5kg or 10kg bags and are covered by the usual Norcros lifetime guarantee.

They are also supported by a new A4 Colour Samples folder. This comes on a durable heavy duty folding card. It includes product and application guidance on all Norcros grouts and sealants, including the 4 into 1 range. It also features sample sticks which can be used to test against actual tiles, providing a real benefit for fixers who are looking to coordinate grout lines with their tiling selections.

More detail on the entire Norcros Adhesives product range, including the new grouts, is available on the company’s new website at www.norcros-adhesives.co.uk.

Overcoming the tiling challenge of anhydrite screeds Mandy Searle, head of technical services at Norcros Adhesives, looks at the latest solutions for tiling on to anhydrite screeds in time-sensitive tiling installations.

Anhydrite screeds, also referred to as calcium sulphate or gypsum-based screeds, are now increasingly popular for larger flooring installations. Their use has grown dramatically in the building industry over the last few years because they offer a number of benefits over sand:cement screeds.

The principal advantage is that, anhydrite screeds can be laid more quickly and easily than traditional sand: cement screeds and are more cost-effective especially for larger areas. They will self-level and offer minimal shrinkage, making them especially suitable for use with underfloor heating systems, where they will fully encapsulate all pipework. Up to 2,000m2 of anhydrite screed can be laid in a single day – compared to 100150m2 which is the maximum possible with conventional sand:cement screeds, making them particularly suitable for use on large commercial contracts.

However there are a number of disadvantages associated with this type of screed, mainly associated with the extended drying time.

Typically sand:cement screeds should be allowed to dry for a minimum of 21 days before they are able to receive a tiled finish as per the recommendations contained within BS5385-3:2003.

To achieve the required maximum relative humidity of 75%, the

minimum drying times quoted for anhydrite screeds before tiling can commence are 1 day per mm up to 40mm thickness, with an additional 2 days per mm thickness above 40mm according to BS8204-7:2003.

In ideal drying conditions therefore a 40mm thick screed should be allowed to dry for a minimum of 40 days, at 50mm thick the minimum drying time would be 60 days and at 60mm thick a minimum of 80 days drying time would be required before the screed was sufficiently dry to receive a tiled finish. Failure to follow these recommendations and tiling before the screed is sufficiently dry will generally result in adhesion failure at the screed/adhesive interface. In an attempt to reduce the incidence of failures, Norcros Adhesives worked together with a major national house builder and screed manufacturer Gypsol to prepare a generic specification for the industry.

Whilst providing a safe method of tiling to anhydrite screeds using cement-based adhesives, it did not improve the drying times required before tiling could commence.

Reductions in drying time can be achieved with the use of a gypsumbased adhesive. This eliminates the formation of ettringite, a chemical reaction which occurs between

a wet cementitious adhesive and the gypsum in the screed, causing tiles to loosen and debond.

Additionally tiling can be carried out when the screed reaches 85 per cent relative humidity, rather than the 75 per cent RH, required when fixing tiles in cement-based adhesive. A number of tile adhesive manufacturers are now offering a tile to gypsum product.

However Norcros’ latest innovation, Pro Gyp Base, is a fasttrack system and a complete game changer in terms of screed drying times. Norcros Pro Gyp Base enables anhydrite screeds with a relative humidity of 95% to be tiled using a cement-based adhesive.

This can normally be achieved in just seven days. Norcros Pro Gyp Base can reduce the time required for the overall build-up of the floor surface by at least 53 days

for a 50mm thick screed in ideal drying conditions. This can clearly have a very significant impact on timescales and costs on-site.

These latest generation systems work by taking a system approach, comprising all the required elements – a primer, a moisture suppressant and a gritted primer to provide a ‘key’ on to which the ceramic tile adhesive can form a strong bond. The adoption of one of these new systems will allow contractors to derive all the benefits of rapid and easy pouring of an anhydrite screed, without involving delays on the job caused by having to wait for an extended drying period.

Norcros Adhesives, Harewood Street, Tunstall, Stoke-on-Trent, Staffs., ST6 5JZ Tel: 01782 524140 www.norcros-adhesives.com

•29•

Sign of a great builder: they’re tight, airtight Will Kirkman, managing director at Ecomerchant – the innovative and sole distributor of Blowerproof, the BBA-certified, paint-on liquid air-tight sealant – explains why great builders know exactly how to make a building airtight.

Good buildings are weather-proof from the outside and airtight from the inside.

That’s what building regulations are all about but we all know how ‘slack Alice’ they are.

The true test is preventing unwanted air from entering a building and keeping warm air in.

Airtight buildings are increasingly wanted and important because: • Our temperate climate means the heating’s on for two to three out of four seasons • We like our creature comforts – we want our workplaces and homes to get warm quickly and stay warm • Energy’s increasingly expensive • If you save energy, you save money.

•30•

Why airtightness is tricky for builders Many new buildings are designed to leak before they make it off the drawing board. All the might of the world’s best insulation and energy-efficient heating systems will be lost quickly if warm air can quickly leak out of a building soon to be replaced with cold, damp air leaking in.

By the time they get built, their poor design has left the unfortunate builder with a whole raft of leaks to resolve.

The smallest of drafts can be a nuisance as they cause cold spots. Cold spots are bad news as they’re accompanied by condensation from water vapour which then triggers a whole range of problems.

• •

• • • •

Energy escapes routes from a building • • • • • • • •

Window and door jambs Wall and ceiling joints Wall and floor joints Joist ends Kicker joints Dot and dab Loft hatches Penetrations: pipes, cables or any bridging external and internal walls • Connections: underfloor heating, light fitting switches/sockets • Timber frame • Dot and dab plasterboard.

Once a building is constructed, stemming unwanted air flow can prove difficult and expensive. So what’s the answer? How to stop cold air getting in, warm air getting out Your priority is to stop warm air leaking out of a building which will help stop uncontrolled air moving around.

What are the options to remedy leaky buildings? A whole range of strategies are at your disposal but I’d recommend.

1. Have a plan – showing airtightness layers – it says ‘we’re serious about this’.

2. Share it with every trade and get them ‘on the same page’ - ensure every trade knows you’re aiming for airtightness. That may make your electrician punch a hole in a wall differently.

3. Frequently inspect – to check the airproof layer has not been compromised by shoddy workmanship.

4. Beware of dry lining – dot and dab creates corridors for air to move between the blockwork and plasterboard. Plastering is airtight but you still need to ensure all junctions are sealed between floors and skirtings as well as floors and ceilings.

5. Don’t use expanding foam – it shrinks and breaks down over time.

6. Invest in an anemometer - to measure, detect and demonstrate leaks.

7. Here’s a checklist: • Penetrations • Windows (especially dormer) • Door jambs • Cills • Lintels • Heating manifolds (underfloor systems and radiator pipes) • Boiler flues • Water pipes • Gas pipes • Drainage/soil pipes • Electricity cables and meter boxes • Suspended ceilings • Cupboards • Loft hatches • Bath panels • Light fittings particularly downlights, pull cords, switches and sockets.

Help is at hand The good news is that modern materials are now evolving to make airtightness easier and more affordable to achieve.

Blowerproof is nothing short of airproofing magic because: • You simply paint it on – whatever your substrate (plaster, steel, masonry,

render, cement, wood, mineral wool, humid surfaces), cables, pipes.

Blowerproof creates an uninterrupted membrane which resists puncture.

It paints on blue, dries jet black so you can see that a permanent seal has been achieved. There is a white version too that can be used under plaster.

It’s a viscous liquid so it seals every nook and cranny no matter how tricky the shape of the gap or hole.

You can then plaster, paint or do whatever else you need to over it.

Brushes rinse out with water.

It’s safe ie VOC free and BAA-certified.

And it costs £50 a tub so quickly justifies both its product and labour costs. So, the lesson is, seal all those small cracks and holes and your customers will remember you well for many years after as they revel in the warm comfort and low energy bills only an airtight building affords.

See how to create airtight membranes quickly and easily: www.blowerproof.co.uk.

Building Regulations (for England & Wales) set a mandatory requirement for airtightness.

All buildings must meet ‘reasonable standards’ and newly built dwellings undergo a pressure test. They must achieve air leakage of less than 10m3/ hm2.

That is the air leakage rate per hour, per square metre of envelope area. The m3/hm2 figure is the headline ‘pass or fail’ number produced by the air testing engineer and demonstrates how much air (typically by depressurising) is being sucked into the building through ‘leakage’ when the fan is operating at 50 Pascals.

The test measures uncontrolled air leakage from gaps and cracks in the fabric of the building ie not air escaping from trickle vents, extract fans or ventilation systems which are sealed prior to testing.

Ideal or the ‘maximum’ air tightness you want to achieve is: 4-5m3/hm2 in a naturally vented building – ie using extract fans, trickle vents and windows.

Any tighter than that and you’ll need forced ventilation ie a mechanical ventilation system with or without a heat recovery function (MVHR) which extracts and recycles heat from exiting air to warm the incoming fresh air.

•31•

Bathroom Takeaway Introduce their Serene Gloss Grey Range Grey is certainly the new black when it comes to bathrooms. Not only does grey create a soft contrast to the luxurious freestanding white bath tub but also adds a contemporary twist to the Victorian style bathroom suites.

To complement this trend, www.bathroomtakeaway.co.uk has introduced the Serene Gloss Grey Range to their existing fabulous furniture range.

Available in a wide range of options to suit all bathrooms, customers can choose to have a freestanding vanity unit, a space saving wall hung vanity unit and back to wall unit complete with cistern and toilet in the Serene Gloss Grey tone.

Prices start from just £194.97 for a stand alone vanity unit and if customers are looking for matching unit they can choose the Serene Gloss Grey Freestanding Vanity Unit together with the Serene Gloss Grey Bck to Wall Toilet Suite for just £429.97 Bathroom Takeaway’s Marketing Manager, Beatriz Pardo, said: “Grey is a great colour for bathrooms as not only is it soothing and neutral but also complements any colour that you wish to add in to suit your mood or season.

This gives you the flexibility and freedom to update your bathroom throughout the year and add your own personality with bright towels and individual accessories.”

The serene Gloss Grey Range is great with plain or patterned tiles and with its soft curved edges creates a contemporary look that’s fresh and clean looking. The vanity units are the perfect storage solution as they blend into the existing bathroom and hide away all the unsightly bathroom must haves such as shampoos and creams as well as all the cleaning products too.

Also available in this stunning Serene Gloss Grey range are two beautiful countertop basins which will give any bathroom the wow factor. The countertop basins are popular as not only do they look great but are also are slightly higher than the standard sink units which means that you don’t need to bend when using the basin.

The Serene Gloss Grey Vanity Top Board Noda Bowl also create the illusion that the sink has been placed on top of the unit.

•32•

ÂŽ

aquariss.com The home of Quality Designer Bathrooms

+44(0)333 305 2162

We We have have thousands thousands of of genuine genuine manufacturers’ manufacturers’ electrical electrical spares spares in in stock. stock.

We We take take pride pride in in supplying supplying the the right right part part first first time, time, saving saving you you time time and and money. money.

Call Call or or email email our our friendly friendly team team TODAY...

TODAY... www.uk-spares.com www.uk-spares.com or or email email sales@uk-spares.com sales@uk-spares.com Tel: 01454 620500 Twitter: Tel: 01454 620500 Twitter: @UKSpares @UKSpares Unit Unit 1155, 1155, Aztec Aztec West, West, Almondsbury, Almondsbury, Bristol Bristol BS32 BS32 4TF 4TF

   

   

   

roma radiator

classic steel column radiator in a wide range of sizes with fusion welding very versatile in both modern and period settings, ideal for most applications available in white (RAL 9016) within 3 working days a range of colours are available within 20 working days

bassano vertical round radiator

contemporary modern half and quarter round vertical designer radiators suitable for flat walls, bulkheads or corners in modern living areas available in white (RAL 9016) within 3 days available in a range of colours within 20 working days

magenta flat radiator

modern minimal style ultra lightweight designer aluminium radiator ideal for any room, vertical, horizontal and low level sizes in stock anthracite, aluminium and white finishes in stock, available in 3 days

Heating, Ventilation and Insulation

Best on Energy For Exterior and Interior Applications Rinnai’s Infinity range of A-rated continuous flow gas fired water heaters which includes models specifically designed for domestic/light commercial use guarantees the highest efficiencies and lowest running costs at consistent temperatures 24/7 compared with any method of hot water delivery.

The Rinnai Infinity range of continuous flow – sometimes referred to as ‘tankless’ - water heating units are being specified more and more often for domestic properties, cafes, pubs, restaurants, offices, shops, hairdressers, commercial units, caravan parks and leisure facilities as installers and end users become aware of their energy saving benefits.

The reason for the increase in uptake is that continuous flow heater systems are proven to be more energy efficient than storage systems and as such are increasingly becoming the experts’ preferred method of hot water provision. The word is out that the Rinnai units easily cater for projects that need high volumes of water at intermittent times of day delivered at accurate temperatures to ensure user comfort and safety.

They are also easy to operate and simple to install and maintain.

Rinnai’s Infinity multipoint 16i water heater, for example, eliminates the problem of sudden changes in water temperature, resulting in cold showers or scalding hot baths – the water temperature you set is the water temperature you get. So, if somebody is happily showering at 42°C and a tap is turned on to draw a bath elsewhere in the property, the temperature does not vary, and there is no chance of either user running out of hot water.

•36•

The Rinnai Infinity 16i interior model measures 675 x 370 x 139mm and weighs in at 18kg. The room sealed unit has a temperature range of 35°C to 60°C with direct electronic ignition. Gas consumption ranges between 4.7kW-34.9kW for Natural Gas and 4.9kW-36.8kW when using propane. Hot water delivery flow is an impressive 16ltr max flow and 2.4 ltr/min minimum flow. Nominal operation pressure is 1-7 bar and it uses a 230V AC 50Hz 1ph power supply with an electrical consumption of 68W. Meanwhile, where an external installation is required, the Rinnai Infinity 17e external multipoint water heater offers greater flexibility at the design stage and offers a viable solution where flue runs are problematic or internal space is not available. Capable of flow rates of up to 510 litres per hour at a 50°C rise, the 17e is suitable for multiple applications and can be specified for use with Natural Gas or propane.

The 17e has full frost protection and is available with a range of external ancillary items, including pipe cover box – and security cage where necessary.

The Infinity 11i interior unit differs from the 16i as it weighs 2kg less at 16kg and consumes 6.10kW-21.60kW of Natural Gas and has an 11 metre maximum flow.

For more information on the RINNAI product range visit www.rinnaiuk.com

Heating, Ventilation and Insulation

•37•

Bathrooms, Washrooms and Kitchens

•38•

IN/OUT OPENING OF THE DOOR

YOUNG G+F

DOOR AND INLINE PANEL INTRODUCING OUR NEW OPEN IN AND OUT SHOWER ENCLOSURE WITH SELF CLOSING RISE AND FALL HINGES. ANTI-BACTERIAL & ANTI-SCALE TREATMENT SUPPLIED BOTH TO GLASS AND FRAMES AS STANDARD

www.novellini.co.uk info-uk@novellini.com

Novellini UK offers a full range of shower products including bespoke shower enclosures, wetrooms, steam rooms and much more, why not visit our website for more details.

The Ardingly, Pevensey, Cinder, Rusper and Lindfield Family of Stainless Steel Towel Rails These stalwarts of our Sussex Range Collection continue from strength to strength.

he main feature of these towel rails are the larger than normal gaps within the bar spacing. Of course with this added spacing comes further practicability should you require more than one bath sheet or within a larger family bathroom. In fact this rail very much marries practicability with the more minimalistic styling popular within design today, a thoroughly modern classic.

are utilized as a secondary source of heating, i.e. drying of the towel rails; these rails are competitively priced and extremely practical. The baby of the range, the Cinder is also popular within kitchens, as it is small and compact.

Favoured by developers in new build developments where the rails

This range of towel rails is available in three different

T

•40•

heating formats: these being electric only, dual fuel and the ability to be utilized solely within the central heating system. The rails, as always, are suitable for open plumbing systems.

Offered in a choice of either satin or a highly polished stainless steel surface, all of these towel rails are hand

finished by the company’s craftsmen to ensure the highest quality is maintained; so it is no surprise that JIS is confident enough to offer its usual no-quibble 25 year guarantee.

All of the towel rails within the Sussex Range are entirely fabricated from 304 grade stainless steel, of which over 90% is from recycled source and the rail itself is 100% recyclable at the end of its life. There are no environmentally harmful chemical plating processes in the manufacture of stainless steel, the very fact that is is not plated ensures the rails will not rust, flake or corrode and small marks can simply be polished out. This makes them a durable, as well as an attractive, environmentally-friendly choice.

The sizing’s are as follows: Cinder 370mm x 520mm Rusper 700mm x 520mm Pevensey 975mm x 520mm Lindfield 1275mm x 520mm Ardingly 1580mm x 520mm The family ranges in price from £145.95 for the baby of the family, the Cinder, climbing through the range to the Rusper at £179.95, the Pevensey at £248, the Lindfield at £294 and finally the Ardingly at £359.95, all in central heating format. Please visit www.sussexrange.co.uk for further information or contact our friendly staff on 01444 831200

Happy New Year and a Happy New Performance Panels Website!

Visit us at www.performance-panels.co.uk

Performance Panels Limited is a leading UK stockholder and distributor of specialised sheet materials from top brands.

Trespa

Arpa

Visit our new and improved website to see the wide range of exterior and interior surface materials we can provide.

Download brochures and technical information, request free samples and discover how our inventive customers use the high-quality decorative panels.

Rehau

Westag & Getalit

Sample Hotline: +44 (0)1422 310 319

As well as being the largest UK stockist of Trespa laboratory surfaces, Performance Panels distributes high pressure and compact grade laminates, Polymeric Glass and tempered solid surface.

Visit our new website today to ďŹ nd out more: www.performance-panels.co.uk

Email: info@performance-panels.co.uk

Bathrooms, Washrooms and Kitchens

Tansun Infrared Heaters Maximise Outside Dining at the Lighterman The Lighterman at Granary Square, Kings Cross is a new contemporary design of public house and a landmark site in the new Kings Cross development. And Tansun infrared heaters are playing their part by enhancing the exterior space for the warmth and comfort of customers.

This new project by Open House Projects, has seen The Lighterman join the group’s two others in London’s Fitzrovia and follows the theme of a modern interpretation of the traditional pub with casual dining, drinking and socialising using modern British menus with European influences.

Inspired by the Victorian Lightermen who worked on the flat bottom barges, known as ‘Lighters,’ The Lighterman has a contemporary design over three floors with stunning views across Granary Square and Regents Canal.

Tansun infrared heaters were selected by Open House Projects for the outside terrace where Tansun’s Bahama single 1.5kW heaters are discreetly integrated under seven parosols with four heaters per parasol. Hannah Burke, Project Manager for Open House Projects is delighted with the result commenting, “The Tansun heaters really do allow us to take the inside out, making our terrace functional over the cooler months and evenings so generating increased revenue from customers’ outdoor use”. She continued, “We were delighted to find the Tansun heaters as they are very sleek looking units and can be specified in any RAL colour. We chose graphite grey to complement the masts of the parasols and so they are not at all intrusive, and at the same time have low glare and look warm. The heaters have been very successful and we hope to use them on other projects in the future.”

The Bahama infrared heaters from Tansun are a flexible design easily fitted onto awnings and parasols to become part of their structure and are IP rated. Available in single 1.5kW or double 3kW appliances, the stylish heaters can cover an area of up to 22 sq.metres and their glare-reducing gold reflectors have a smooth, parabolic finish for powerful heat dispersion. The Bahama heater provides customers with low glare heaters that fit discreetly into many environments in the standard colours of white, grey or black. The design is also available in any RAL colour with Tansun’s bespoke colour service which allows heaters to be powder coated in a wide range of colours with additional corporate branding if required. The Bahama heaters can be made to fit awning or parasol profiles or indoor / outdoor venue colour schemes to suit customers’ needs. The heaters come with a full two year Tansun warranty.

All of Tansun’s products are manufactured in the UK and designed using premium components. Tansun has been established for thirtyfive years and pioneered the concept of infrared electric heaters in collaboration with Philips technology. The company offers the largest range of domestic, commercial and industrial infrared heaters in the world, providing maintenance-free, safe and healthy heating appliances.

Further information is available from Tansun on 0121 580 6200, by emailing sales@tansun.com or by visiting the company’s website at www.tansun.com .

•43•

Vicaima Launch New Products At World Leading Design Show One of Europe’s leading manufacturers of interior doors and decorative panel products recently made a big splash at London’s 100% Design Event, held at Olympia in September.

Vicaima presented no less than two large stands showcasing genuine inspiration with an array of new design trends and performance solutions.

With a reputation for design excellence that spans almost 60 years, Vicaima has always prided itself on forward thinking and a passion for innovation.

This was very much in evidence at this year’s design show where Vicaima were able to launch a whole host of new products, including their exciting and thought provoking MATCH decorative panels.

MATCH was very noticeable throughout both stands, where it could be seen as wall panels, doors, furniture, ornamental pillars and even works of art.

•44•

MATCH is a revolutionary decorative panel that uses innovative technology and advanced production processes to create tailor-made graphic solutions directly onto veneered and other base layers.

With the ability to re-create natural materials such as stone, textile, metal or unique surfaces. In this way designers can untether their creative flair and remove the boundaries to realising unique concepts.

Of course no Vicaima exhibition would be complete without world class interior doors and door sets and again here Vicaima did not disappoint.

With high gloss veneers, unique stained designs and special lacquered faces, all presented, many for the first time ever, with both an aesthetic and performance characteristics in mind, Vicaima had something for residential and commercial applications alike.

Examples included their invisible sliding door mechanism, the new Exclusive EX70 door with its chevron pattern and displayed as a flush-to-surround inverse set, or the hotel inspired acoustic and fire performance entrance system incorporating RFID door locks.

For another opportunity to see Vicaima’s trend-setting designs and inspirational approach to interior joinery products, visit the Vicaima websites today at www.vicaima.com or www.vicaimamatch.com alternatively contact 01793 532333 where help and assistance is always on hand.

•45•

Call us

Learn more

01296 481220

osmouk.com

YOUR OWN TRULY BESPOKE FLOOR NEW

BROCHURE OUT NOW! including the new Harfa Vintage!

ESCO FLOORING: Highest quality european oak flooring

ü

|

ü

|

ü

|

ü

|

ü

CUSTOM-MADE NATURAL POLYX-OIL TREATMENT DURABLE YOUR STYLE

Sun shading in the Winter?

Have you noticed how the Sun adjusts its position in the sky, throughout the day and throughout the year?

Adjustable sun needs adjustable shading.

This problem doesn’t occur every day and when it does it is only for a part of the day and only part of the year, but it will be back again next year and the year after that and you get the message.

So why not sort it now? Fit Reflex-Rol roller blinds, which give control of winter glare whilst improving privacy, reducing summer hear gain and reducing winter heating bills (by improving night time insulation). They even continue to give good levels natural light with plenty of outward daytime vision.

Are the low angles of Winter sun causing you problems?

Unable to see clearly because there is too much light in the wrong places at the wrong time as the sun moves through the sky?

Solve the problems of low angles of winter sun and take the benefits the whole year round.

Reflex-Rol have been installing adjustable window shading roller blinds in the UK for over 30 years. A selection of hardware systems to suit the great majority of window types, industry leading solar filter/shade fabrics with the experience to recommend and install real solar shading solutions.

Call us now for more information and fabric/shading samples, or send us a photograph of a typical window, some size and quantity indications and we can arrange quick budget costings for you 01989 750704 info@reflex-rol.co.uk www.reflex-rol.co.uk

Innovation in Lifting Keeping up with Building Design Challenging new building designs need new façade construction techniques.

That is why innovative equipment supplied by Hird, such as the Winlet glazing and materials handling robot, is in such strong demand.

M

ini crane, glazing installation and powered access specialist Hird is the authorised UK and Ireland dealer for Winlet glazing robots, which one client has called the biggest step forward in glass installation in 10 years.

The Danish glazing robot is compact, light and easy to move. It can lift, carry and place, with absolute precision, glass sheets or any other non-porous panels up to 1,000kg, even overhead.

Hird Director John Wilding said: “More than ever before, architects and developers are taking account of advances in construction process, as they seek to minimise development costs by reducing build times, and simplifying construction techniques.

“The Winlet increase productivity by 50% on a range of sites, including high-rise towers in London. As well as being faster, it’s safer, and uses smaller installation teams.

•48•

“Architects are always pushing the boundaries of what’s possible in design. Our aim is to provide lifting equipment that allows structural engineers and contractors to keep up.”

Other lifting equipment supplied by Hird include pick and carry cranes and spider cranes, both of which are ideal for a range of construction tasks, including glazing and façade erection.

Hird is also a UK leader in vacuum lifter hire, for flat or curved sheets, and loads up to 3,500kg – plus a full range of powered access machines, including scissor lifts, cherry pickers and personnel masts.

Hird Managing Director Phil Hird said: “We aim to be a one-stopshop for materials handling and lifting, and working at height, anywhere in UK. “Whether our clients need pick and carry cranes, with a range of materials handling attachments, or all-terrain spider cranes, we can meet their needs.”

For more information about Hird equipment, call 0203 174 0658 or email info@hird.co.uk. Web: www.hird.co.uk.

Glass Lifting Applications for domestic & commercial projects Glass Vacuum Lifters Glazing Robots Glass Trolleys & Stillages Mini Cranes AS FEATURED ON

Mini Cranes

Vacuum Lifters

Glazing Robots

Glass Trolleys / Stillages

Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658 Email: info@hird.co.uk www.hird.co.uk

National Waterways Museum’s largest exhibit gets a lift The National Waterways Museum is located in a Grade II listed Victorian era warehouse at Gloucester Docks, the most inland port in the country. It’s largest exhibit is the Sabrina 5, a 90ft barge used in the war effort to deliver cargo. Number 5 was one of 6 unpowered barges built in 1944 by Charles Hill & Sons of Bristol.

The barge has been used over its life to convey many of the imports that landed at Avonmouth to inland locations such as Worcester and Stourport.

In 1988, Sabrina 5 was towed to the Waterways Museum to begin the long job of a full restoration and in 2017 the project was finally completed. The barge now has a new role as an education centre and meeting place, creating an exciting atmosphere for children and students when they arrive on board.

Invalifts were asked to look at how disabled access could be provided to the lower level. By working with the restorers, Invalifts identified that an inclined stair riser lift could be suitable but the new stairs and the lift would need to be designed together in order to fit inside the barge. Invalifts were able to provide their Inva Stair Riser, a platform lift with a 1000mm x 800mm platform size that was able to negotiate a 90 degree bend in the stairs midway through the travel. By having special brackets made, the lift stanchions could be mounted on the stair stringer rather than on the steps themselves and saving vital space in the confined area.

The team at the museum were thrilled with their new lift, and look forward to allowing access to the different levels of the barge for all visitors in the years to come. The lift was installed on site within just 2 days.

To find out more about the Inva Stair Riser platform lift, you can give Invalifts a call on 0845 468 2543 and speak to one of their friendly experts.

•50•

Platform Lifts Our range of platform lifts includes the MC2000 lift (right) - a high quality enclosed platform lift with a unique chain drive, and the option of glazing on all 4 shaft sides.

With a fantastic guarantee, and small footprints available, this is a premier platform lift.

We also offer stair platform lifts and a range of platform lifts for both internal and external use.

The Platform Lift Experts

Tel: 0845 4682543 Web: www.invalifts.com

Let the Experts Take Care of your Let the Experts TakeProblems Care of your Domestic Domestic Waste Water Waste Water Problems

When it comes to off mains sewage many people can be blown away by all the information and differing products internet, Google “domestic sewage plant” andthe the consumer regulations??

Whatisabout the When it available comes toon offthe mains sewage many people can betreatment blown away Environment agency??

Etc. but be bombarded by plants of all shapes and sizes . by all the information and differing products available on the internet,

assured we will be with you every step of the way, making sure you Google “domestic sewage treatment plant” the consumer is products on the This is why dealing with a specialist What can go into and the plant? backed up by proper havemarket the right solution designed manufacturer, installer servicerof of all shapes What happens to the good old- fashioned customer service - (dial bombarded byand plants and sizes . waste? around your requirements.

You treatment plants like We Build It Ltd can give Do I need planning permission? straight through speak ourmanufacturer, specialists, no dealand direct withtothe the consumer piece of mind and Do I need to inform the or architect wants to knowautomated service or queuing buying a with over 25 yearssystem) waste water his is why dealing with a confidence soak away has failed. is that they arespecialist getting the right information, the Environment agency? the product will work withsewage treatment plant can be quite daunting, experience, 24-7-365 days of the manufacturer, the right solution and the right system. long will it last? plant isyear best for my situation?? What are installer and servicer of We often getHow asked; minimum effort from themwhich during DOES IT SMELL!!!!!????? the life of the plant. the regulations?? What about the Environment treatment plants like We Build It We It Ltdthe areconsumer based in the heart ofHow somedoes it work? What does it agency?? Etc.For butthe beself-builder assured we the will right be with LtdBuild can give piece of most outstanding All of these questions can We be answered We straight you every step of the way, making suretoyou treatment plant is simple install of Shropshire’s mind and confidence they arecountryside. cost?

Build It Ltdbyoffer As one ofthe theright UK’s largest manufacturers of it use electric?

Build It experts who knowforward, their products havefor the rightproviding solution they designed have around taken the getting information, Does easy toinside follow advice domestic plants, we And focushow much? out; ask a middle man withyour no knowledge of your requirements.

You dealadvice, direct with the manufacturers be aware the right sewage solutiontreatment and the right sewage treatment needs. on high quality, affordable products. AllDo of I have to the industry, these questions manufacturer,some withplants over 25 years waste water need complete system. maintain it? product or process All of our sewage treatment our sewage treatment plants are based How on do I install andit? the customer is often plants baffledcome by terms experience, 24-7-365 of the yearcan add concretedays backfill which with easy to follow the extended aeration do they really need manuals, as to install costs, a well-constructed We successful Build It Ltdand are simple based in the How big is it?such as BOD, COD, NH4, but installation and service method.

We can manufacture, knowit? this? All the homeowner, builder or For the self-builder the right plant plant such as thetreatment BioPure can beis heart of some ofdesign, Shropshire’s most install Do I need to to empty well as free telephone assistance and service sewage treatment plant singlecan goarchitect that the product to install providing taken the backfilled withthey peahave gravel. outstanding countryside.

As one of forWhat into the wants plant?to know isby specialist installers. We simple can also houses, developments, rural willto work the minimum effort from them installations manufacturers advice, be aware some plants the UK’ssmall largest manufacturers of industrial What happens the with waste? offer full or assisted units, campsites, hotels,plants, offices, barn during the life of the plant.at very competitive rates. We need complete concrete backfill whichnot can add Consider whole life costs, domestic sewagepubs, treatment Do I need planning permission? conversions applications. install costs, a well-constructed plant such as just the cost of the treatment we focus on and highcommercial quality, affordable Do Our I need to inform the pride ourselves on offeringtothe We Build It Ltd offer straight forward, easy to products besewage used after an existing the BioPure can be factor backfilled with costs, pea gravel. plant, in install products.can All also of our Environment agency? best GRP products on the market follow advice for your sewage treatment needs. septic tank to enable the effluent to be power consumption, servicing, treatment plants are based on the How long will it last? backed up by proper good oldConsider whole life costs, not just the cost discharged directly to aextended water causeway,DOES if your consumable spare parts, product successful and simple IT SMELL!!!!!????? fashioned customer service - (dial All of our sewage treatment plants come of the treatment plant, factor in install costs, existing soak away has failed. life cycle (guarantee) and emptying aeration method. We can design, straight through and speak to our with easy to follow installation and service power consumption, servicing, consumable charges, We Build It Ltd offer a 25 manufacture, install and service All of these questions be as free telephone specialists, no automated service manuals,can as well assistance spare parts, product life cycle (guarantee) and We often get asked; year guarantee on the treatment sewage treatment plant for single answered by by Wespecialist Build It experts or queuing system) buying a installers. We can also offer full or emptying charges, We Build It Ltd offer a 25 year plant and 2 Years on the air pump. houses, small developments, products inside at very sewage treatment plant can be How does it work?

What doesrural it cost? who know their assisted installations competitive rates. guarantee on the treatment plant and 2 Years on industrial campsites, pubs, out; ask a middle man with no on offering quite the daunting, which plant is Does it useunits, electric?

We pride ourselves best GRP the air pump. hotels, offices, barn conversions knowledge of the industry, product best for my situation?? What are And how much? andI commercial applications.

Our or process these questions and Do have to maintain it?

We can design, install and service sewage treatment plant for products can also the customer is often baffled by manufacture, How do I install it?be used after an We can design, manufacture, install and service sewage single small developments, rural industrial units, campsites, pubs, hotels, existing terms such as BOD, COD,houses, NH4, How bigseptic is it? tank to enable the treatment plant for single houses, small developments, effluent toto beempty discharged need tobarn knowconversions and commercial applications.

Do I need it? directly to but do they reallyoffices, rural industrial units, campsites, pubs, hotels, offices, a water causeway, if your existing this? All the homeowner, builder

T

barn conversions and commercial applications.

The solution sewage system The Bio-Pure Bio-PureSimple Simple solution sewage system Any plant up to 50 people (pe 50) should be manufactured and tested to Any plant upthis to gives 50 people (pe 50) should be manufactured and tested to EN12566-3, the consumer confidence they are getting the right EN12566-3,plant this for gives theapplication, consumer confidence getting the right treatment their but always they ask toare see the certificate treatment plantas forthese theircan application, but always see the and test results be manipulated andask nottoshow the certificate true and test results these can be manipulated and not show the true outcome of the as test. outcome of the test.

Model

Bio-Pure 1

Bio-Pure 2

Bio-Pure 3

Sizing the plant for a single house is simple its number of bedrooms plus Sizing plantbedroom for a single house number of bedrooms plus two, sothe a three house is ais5simple personitstreatment plant, for multiple two, so a three is a 5 plant person treatment for multiple dwellings usingbedroom the samehouse treatment speak to the plant, manufacturer for dwellings the same plantrange speakare to in theincrements manufacturer the correctusing size unit, mosttreatment manufactures 1-5, for 1-7, the unit, most (See manufactures areRight). in increments 1-5, 1-7, 5-13correct etc. upsize to 50 person.

Our Rangerange To The 5-13 etc. up to 50 person. (See Our Range To The Right).

Bio-Pure 4

Bio-Pure 5

Bio-Pure 6

Bio-Pure 7

Bio-Pure 8

Bio-Pure 9

Bio-Pure 10

TWIN

TWIN

TWIN

No. of persons

1 to 5

1 to 7

5 to 13

10 to 16

14 to 22

20 to 27

25 to 32

30 to 36

35 to 42

40 to 55

Max. average daily flow

750 ltr

1050 ltr

1800 ltr

2400 ltr

3300 ltr

4050 ltr

4800 ltr

5400 ltr

6000 ltr

8250 ltr

Max. BOD/day

300 g

420 g

780 g

960 g

1320 g

1620 g

1820 g

2160 g

2520 g

3300 g

In ground depth

2.25 m

2.25 m

2.44 m

2.74 m

2.74 m

2.98 m

2.98 m

2 x 2.74 m

2 x 2.74 m

2 x 2.98

Outside Diameter

1.85 m

1.85 m

2.10 m

2.10 m

2.10 m

2.55 m

2.55m

2 x 2.10 m

2 x 2.10 m

2 x 2.53

Inlet invert

570 mm

570 mm

700 mm

700 mm

700 mm

820 mm

820 mm

700 mm

700 mm

820 mm

Outlet invert

670 mm

670 mm

800 mm

800 mm

800 mm

920 mm

920 mm

900 mm

900 mm

1020 mm

Weight empty

125 kgs

125 kgs

200 kgs

230 kgs

230 kgs

350 kgs

350 kgs

460 kgs

460 kgs

800 kgs

Total Capacity

2270 ltr

2270 ltr

3000 ltr

3975 ltr

3975 ltr

5610 ltr

6000 ltr

7950 ltr

7950 ltr

11220 ltr

E Range

27 w

42 w

65 w

84 w

130 w

130 w

210 w

230 w

280 w

280 w

•52•

The treatment plant you choose should be around 95% efficient thus allowing long intervals before de-sludge is required. The waste water must be cleaned to a standard meeting the usual discharge level requirement. You must apply for either an exemption certificate or permit before making a discharge we can assist with this and advise on the method of discharge, be it a ditch, stream, watercourse or soakaway.

Thethe treatment plant you choose As system breaks down and aerates the solids, the should be around 95% efficient items such as wipes, sanitary introduction of non-degradable thus allowing long intervals products etc. should be avoided at all times in any treatment beforeThis de-sludge required.

The and increase the need to plant. will clogisup the system waste water must be cleaned to empty the unit, follow this instruction and typical emptying will a standard meeting be around 3-5 years,the it isusual also recommended no medicines, or discharge level requirement, you harsh chemicals enter the unit, try to stick to Eco brands and must apply for either an exemption stagger washing throughout the week. certificate or permit, before making a discharge we can assist with this and advise on the method of discharge, be it a ditch, stream, Simple solution sewage watercourse or soakaway.

The FlowPath

A simple Schematic of a BioPure Treatment Plant

A BioPure Treatment Plant

system

We Build it hasbreaks developed range of package As the system downitsand sewage treatment plants utilising proven SAF aerates the solids, the introduction (submerged aerateditems filter)such technology for of non-degradable maximum performance andetc. reliability, need using to theempty the unit, follow this as wipes, sanitary products most reliable energy blowers should be avoided atefficient all timesaeration in instruction and typical emptying with a prolonged integral FlowPath to around 3-5 years, it is also any treatment plant, this will clog system will be maximise effluent up the system andquality. increase the recommended no medicines, or

harsh chemicals enter the unit, try to stick to Eco brands and stagger washing throughout the week.

A simple Schematic of a BioPure Treatment Plant A BioPure Treatment Plant

LEFT

ABOVE

All our Flowpath treatment plants are designed in accordance with the British Simple Water Code of solution sewage system Practice for flows and loads, this range can be designed to meet your population and We Buildrequirements, it has developed consent our standard range its range of package can accommodate upsewage to 300 pe. This range treatment utilising of productsplants can be designed for larger scale proven SAF (submerged commercial applications aerated such as camping sites, filter) technology for maximum ABOVE LEFT & RIGHT FlowPath System • One service visit where all necessary leisure facilities, schools, hotels, offices and performance and reliability, using checks are carried out. This includes industrial applications. the most reliable energy efficient assessing the aeration pattern, sludge • The service agreement lasts for 12 aeration blowers with And a prolonged Maintenance, Spares Servicing levels and effluent quality. months and will also help you meet integral FlowPath system to your Environment Agency obligations maximise effluent quality.

The consumer needs easy to follow advice for • All labour expenses for servicing and call regarding your Consent to Discharge.

All our Flowpath treatment plants their sewage treatment needs especially when outs are covered so there are no hidden This includes keeping records of service, are designed accordance servicing theirinplant, maintaining any sewage costs. de-sludging and maintenance work for a ABOVE LEFT & RIGHT with the British Water Code of A simple Schematic of a BioPure • Emergency breakdown coverminimum treatment plant, is a very important partneeds of especially when servicing of 5 years.

Treatment Plant Practice for and loads, • The cost will beIffree their plant, maintaining anyof all serviceable for parts 12 months. you have any ensuring theflows efficiency of thethis system and that BOTTOM LEFT A simple Schematic of a BioPure range can be to meet charge. rebuilding theyour air unit,Our sewage treatmentof plant, is a This very includesproblem with call Other us you adhere todesigned any operating and maintenance Treatment Plant Products include Mini SAF’s (for your population andservicing. consent pump, replacing the diaphragms alsoout and important part of ensuring the and we willand come fix it and outbuildings up to 4 persons) manual and annual offices requirements, our standard range the airand filters. efficiency of the system that free of charge. meet your Pump Stations you (standard and Environment bespoke) Septic canstrongly accommodate to 300 the pe. systemyou We advise up servicing on adhere to any operating and • One service visit where Tank all Conversion Agency regarding Units obligations (used as secondary Sludge out as required.

This rangebasis of products an annual and thiscan will take on average maintenance• manual and return annualis carriednecessary checks are carried your Consent to Discharge. treatment for underperforming septic tanks) This is the removal of settled sludge fromassessing the be designed for larger scale It will also less than an hour to complete. help servicing. out. This includes This includes keeping records the outer scum ring back into the centre sludgeFor commercial such as you to meet applications your legal requirements with the aeration pattern, levels a full rangeof ofservice, our products and servicing de-sludging and be re digested treated camping sites,Agency. leisure facilities, Environment We strongly advisechamber servicingtothe andand effluent quality. visit www.bio-pure.com maintenance work for a again.

This helps to keep emptying schools, hotels, offices and system on an annual basis and • Allthe labour expenses for servicing www.webuildit-ltd.co.uk or5 years. minimum of We Build Itapplications.

Ltd Service Contracts periodless low. industrial this will take on average and call outs are covered so(01746 781782). call than an hour to complete. It will there are no hidden costs.

Our Other Products include Emergency breakdown cover for 12 months.

If you• to meet Emptying is NOT included theof all serviceable parts Maintanance, Spares And also help your legal • Theincost Mini SAF’s (for offices and you have any problem with your unit, call us and as the Bio-Pure notof charge. This Servicing requirements withagreement the Environment will does be free we will come out and fix it free of charge. require emptying for 3-5 years.

Agency. includes rebuilding the air pump, outbuildings up to 4 persons) Pump Stations (standard and The consumer needs easy to follow replacing the diaphragms and advice for their sewage treatment bespoke) We Build It Ltd Service Contracts also the air filters.

• Sludge return is carried out as Septic Tank Units Visit usConversion at required. This is the removal of (used as secondary treatment settled sludge from the outer for underperforming septic scum ring back into the centre tanks) chamber to be re digested and For a full range of our treated again. This helps to keep products and servicing visit the emptying period low.

Stand Number www.bio-pure.com • Emptying is NOT included in E217 www.webuildit-ltd.co.uk the agreement as the Bio-Pure does not require emptying for or call (01746 781782).

3-5 years.

• The service agreement lasts for 12 months and will also help

The FlowPath

Homebuilding & Renovating Show

•53•

Walkability: The 11th step Variation on a theme - following in James Speck’s footsteps: “Walkable City - How downtown can save America, one step at a time” Curiously, this experience is shared by most of us in the modern era. We are travelling the world, “expecting” to find our way, with some obvious mundane difficulties. In an ideal world, it shouldn’t really go unnoticed. But it is.

In my view, walkability should incorporate better common rules for outdoors wayfinding signage so that the average person may expect better orientation even in unfamiliar urban spaces.

Lancaster - the most walkable city in Pennsylvania

alkability, a relatively new term in modern Architecture and sustainable urban design, measuring how friendly an urban area is to walking. It pertains to health, environment, and economic benefits and discusses, among other things, the presence or absence and quality of footpaths, sidewalks or other pedestrian rights-of-way, traffic and road conditions, land use patterns, building accessibility, and safety.

W

In Walkable City: How Downtown Can Save America, One Step at a Time (public library), city planner Jeff Speck argues that walkable cities would improve lives for American urban dwellers to greater extent than any attempts to create “greener” living conditions in the personal space.

I found Kaid Benfield summary of Speck’s ten steps of walkability quite comprehensive for my further argument, and although I somewhat do

•54•

not agree with Benfield’s latter analysis, I think that one more important step is required. I am talking about wayfinding signage. One may argue that this is included in the entire concept of attractive building faces, traffic and road conditions or “comfort”. Yet it is often noticed only by its absence. Good wayfinding signage may encourage people to walk the city, to a greater extent than realized by many.

Imagine that: You travel to a foreign country, unfamiliar with the language, trying to get from A to B using a somewhat inferior city map supplied by your hotel or local tourist office and simply cannot locate your current location and direction you need to go to. Sounds familiar?

Wouldn’t better wayfinding signage (including street names, visible numbers, traffic signs, directions and building names) improve your orientation and comfort? Wouldn’t you give anything to be able to easily locate and read the signs?

Not only in America, but worldwide, inadequate wayfinding signage is often emanating from budget considerations, without realizing the human aspects of the issue.

A beautiful building, complex, shopping mall or neighborhood is being built in the urban sphere - but around it and inside structures, people get lost.

I challenge you to read Speck’s work with a fresh look at his previously suggested 10 good steps, thinking how wayfinding signage fits the overall scheme of things.

Written by Pnina Kedar Feldman, International Business Development and Sales Manager at Vista System

For further information, visit www.vistasystem.co.uk or contact Client Service at Vista System Ltd., Tel: 080-0051-8885, Email: info@vistasystem.co.uk

HOME-DESIGNER AND ARCHITECT

MAGAZINE