12V Proactive High Performance Pumps

Portable, used for purging, well development and low flow groundwater sampling.

Features

• Great for PFOA, PFOS & PFAS sampling

• Manufactured using 100% virgin plastic

• Rated for 400 hours under harsh conditions

• Run Pump system from battery installed in your vehicle or a portable 12V AGM battery

• Proactive power booster controller models are required with this pump line

• Backflow-prevention

• Low flow valve sold separately

Mega-Typhoon ® Tsunami ®

in water without the need for a cool down

Power Booster & Low Flow With Power Booster Controllers

Simply connect the controller to a 12V deep cycle battery and connect the pump to the controller and stand back for awesome pumping power!

Features

• Engineered specifically for the 12V high performance plastic pumps

• Power Booster 2 Controller:

Flow control dial set to lowest possible setting controller will produce 12V

Flow control dial set to highest possible setting controller will produce 24V (Note: the controller is not intended to shut off the pump’s motor)

• Low Flow With Power Booster 1, 2 & 3 Controllers: Regulate low flow sampling (Fractional Flow®) as low as 40 ml/min.

• Constant voltage boosting technology (CVBT) allows the correct voltage to reach the pump’s motor

• Low voltage disconnect (LVD) at 10.75V (turns off controller)

• Breaker incorporated into controller

• "Ramp Up" control dial

• Heavy-duty reinforced plastic weatherproof case

• Connect 7 ft wire lead to battery clamps and 8 ft wire leads to pump connector

• 12V Proactive high performance pump

• Quick disconnect plug with battery clamps run continuously in water without the need for a cool down

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

PRO-PA-10750

12V Abyss® Standard & 12V Abyss® 300 Plastic Pumps

The engineered plastic 12V Abyss® pump’s low amp consumption makes it the ideal pump for groundwater sampling and remediation pump and treat situations.

Features

• Great for PFOA & PFAS sampling

• Can operate under harsher conditions with higher turbidity & can even run in oily, sandy liquid

• Easily fits into a schedule 40, 4" wells or larger

• Has a 3,000 hr motor life

• Can run off a 50 A gas powered 12V Crusader® gas driven generator

• Can be hooked up to a weatherproof 110/220V step down transformer which can turn any high voltage situation into a safe low voltage pump

• Simple to make it a solar pumping system by hooking up a solar panel arrangement to an 80 A solar charger and then to a deep cycle marine battery(ies)

Includes

• 12V Abyss® Standard or 12V Abyss® 300 pump

• Quick disconnect plug with battery clamps

Can run continuously 24 hours a day, 7 days a week, it can even run dry 24 hours a day, 7 days a week

Low Flow Sampling & Low Flow With Power Booster 4 Controllers

Simply connect the controller to a 12V deep cycle battery and connect the pump to the controller then stand back for awesome pumping power!

Features For 12V Abyss® Standard Pump

• Engineered for the 12V Abyss® Standard plastic pump

• Precisely control the water discharge with the turn of a knob

• Used to monitor and regulate low flow sampling (Fractional Flow®) as low as 40 ml/min.

• Breaker incorporated into controller

• "Ramp Up" control dial

• Heavy-duty reinforced plastic weatherproof case

• Connect 7 ft wire lead to battery clamps and 8 ft wire leads to pump connector

Features For 12V Abyss® 300 Pump

• Engineered specifically for the 12V Abyss® 300 plastic pump

• Regulates low flow sampling (Fractional Flow®) as low as 40 ml/min.

• Constant voltage boosting technology (CVBT) allows the correct voltage to reach the pump’s motor

• Low voltage disconnect (LVD) at 10.75V (turns off controller or allows pump to pulsate)

• "Ramp Up" control dial

• Steel handle for comfort and control

• Heavy-duty steel weatherproof case

• Connect 3.5 ft wire lead to battery clamps and 4 ft wire leads to pump connector

12V Stainless Steel XL Pumps

Portable, used for purging, well development, low flow sampling and remediation.

Features

• Great for PFOA, PFOS & PFAS sampling

• Manufactured using 100% virgin Stainless Steel

• Each pump comes field-ready with wire, controller connector installed on a light-weight rugged steel locking reel with pump holster

• Bottom debris filter screen allows operation under harsh conditions with high turbidity

• Rugged, simple to use and lightweight

• Battery operated powered by a 12V DC vehicle, AGM or deep cycle marine battery

• EPA low flow sampling compliant

• Low flow valve sold separately

Includes

• 12V Stainless Steel XL pump

• Replaceable motor module

• Low flow control valve

• Wrench

Low Flow With Power Booster 2 LCD XL, 2.5 LCD XL & 3 LCD XL Controllers

Simply connect the controller to a 12V deep cycle battery and connect the pump to the controller then stand back for awesome pumping power!

Features

• Low Flow With Power Booster 2 LCD XL is engineered specifically for 12 V Stainless Steel Monsoon® XL Pump

• Low Flow With Power Booster 2.5 LCD XL is engineered specifically for 12 V Stainless Steel Hurricaine® XL Pump

• Low Flow With Power Booster 3 LCD XL is engineered specifically for 12 V Stainless Steel Mega-Monsoon® XL Pump

• Precisely control the water discharge with the turn of a knob

• Regulate low flow sampling (Fractional Flow®) as low as 40 ml/min.

• Constant voltage boosting technology (CVBT) allows the correct voltage to reach the pump’s motor

• Breaker incorporated into controller

• "Ramp Up" control dial

• Heavy duty reinforced plastic controller

• Connect 7 ft wire lead to battery clamps and 8 ft wire leads to pump connector

Portable Bladder Pumps

Designed with input from field technicians who actually do the sampling! Single turn release head and quick change bladders allow for quick, in-the-field bladder changes and easy decontamination. Custom hose barbs allow the pump to be secured to tubing without the need for tubing clamps.

• Constructed of 316 Stainless Steel

• No special tools or training required to service the pump

• Drop tube intake option allows for deeper sampling

• Compatible with geocontrol PROTM and 300 psi & 500 psi

AVAILABLE

*Replacement PTFE bladders also available

Dedicated Bladder Pumps

Controllers Features

• Constructed of 316 Stainless Steel for durability

• Proprietary resin grade virgin PTFE bladder for long life

• Robust screened intake extends bladder life

• True low flow capability for less agitation

• Optional "Drop-Tube" assembly available for sampling from greaterdepths

• Compatible with geocontrol PROTM and 300 psi & 500 psi

Controllers

geocontrol PRO™

No more lugging heavy, dirty, and noisy compressors into the field or those dangerous nitrogen cylinders. The geocontrol PROTM saves you time, saves your back and saves you money!

• Controls all portable and dedicated bladder pumps and most air lift pumps

• Built-in high performance air compressor allows sampling from depths of 180 ft (54 m)

• Built-in reverse polarity protection

• "Push Pull" tube fitting for easy tubing changes

• geocontrol PROTM

• DC power cord

• Carrying case

300 psi & 500 psi BP Controllers

"Push/Pull" fitting, 1/8" FPT allows for connection to any fitting option

These controllers utilize accurate microprocessor-controlled fill discharge timers to sustain true lowflow sampling techniques. Both controllers are equipped with high-pressure valves and fine resolution regulators that can perform in deep-well applications. They universally connect to any bladder pump system.

• Operates from a 12V DC car battery, rechargeable battery or optional AC to DC power adapter Features

• Designed for durable, trouble-free operation

• High pressure operation for greater depths

• Multiple power input options

• Microprocessor controlled timers for accuracy

• Internal over-pressure protection

• Battery over-draw protection

• Water Level Meter compatibility for well draw-down

• Intuitive user controls and status indicator

Solinst Model 407 Stainless Steel Bladder Pumps

The 407 Stainless Steel Bladder Pumps provide consistent, accurate, reliable groundwater samples in all applications. Ensuring no air/water contact during operation, pumps are ideal for VOC sampling. PTFE bladders are ideal for dedication, while less expensive polyethylene bladders are available for those that prefer to change bladders after each use. Bladders and intake filters are easily replaced in the field in just a few minutes.

Features

• Constructed of 316 Stainless Steel

• Can lift from depths up to 500 ft (150 m) below grade

• Operates at almost any angle and can be placed under landfills, tailings, storage tanks or contaminant plumes

• Excellent for either regular flow or low flow sampling

• Pneumatic drive pumps are well suited for pumping contaminant liquids such as solvents and corrosive chemicals

• Pumps are not damaged by operation in sediment laden water, or in dry pumping conditions

• Meets US EPA standards for VOC groundwater monitoring

• Optional accessory available to prevent freezing in the sample line

• Used in conjunction with the Solinst 464 Electronic Pump Control Unit to provide continuous output of 100 ml/min. or less

Solinst Model 464 125 psi & 250 psi Electronic Pump Controllers

The 464 Electronic Pump Controllers allow faster purge rates and precise low flow control to ensure a representative sample at 100 ml/min or less when sampling for VOCs. Quick-connect fittings allow instant attachment to dedicated well caps, portable reel units and to an air compressor or compressed gas source.

Features

• Has automatic preset sample modes from low through high flow settings

• Up to 99 user-created flow rates can be saved in FRAM memory

• Uses 4 "AA" alkaline batteries that last up to 100 hours of normal use

• Can also be operated manually using only a compressed gas source

• Rugged, dependable and suitable for all environments

Solinst Model 407 12V Oil-Less Compressor

The Solinst 12V Oil-Less Air Compressor is ideal for field use, especially low flow applications of less than 100 ft (30 m) depths.

Features

• Operates at up to 150 psi and is equipped with a 2 US gallon (7.6 L) air tank which is rated to 175 psi

• Operates using 12V DC power source, such as a car or truck vehicle battery

• Compact, lightweight 21 lbs

• Supplied with alligator clips

Part Number Description Quantity

SO-106009 407 12V Oil-Less Compressor With Battery Clips (Low Flow) Each

Solinst Model 408M Micro Double Valve Pumps

The Micro Double Valve Pumps (Micro DVP) have a remarkably small and flexible design. As a positive displacement pneumatic pump, it uses coaxial PTFE tubing to give high quality samples. It is small enough to fit in 1/2" (13 mm) tubing and all channels of the Solinst Model 403 CMT Systems, as its diameter is only 3/8" (10 mm). A manifold at the top end of the pump has a 3/16" (5 mm) PTFE sample tube and a quick-connect fitting for easy attachment to a Control Unit. A multi-purge sampling head is also available for use with the CMT System.

Features

• Suitable for CMT Multilevel System, "Direct-Push"/"Drive-Points" and low flow groundwater monitoring in narrow applications

• Constructed of coaxial PTFE tubing with Stainless Steel fittings and a sintered 316 Stainless Steel 50 micron filter

• Pump body and filter assembly is 6" long x 3/8" diameter

• Flexible 3/8" diameter design fits almost anywhere

• Flow rates of 20 ml/min to 150 ml/min. are possible within narrow applications

• Filters are easily cleaned and replaced

• Durable and easy to operate using the pre-sets and custom sampling capabilities built into the Solinst Model 464 Electronic Control Unit

Tubing & Manifold Each

SO-108219 140 ft 408M PTFE Assembly Pump With Tubing & Manifold Each

SO-108218 240 ft 408M PTFE Assembly Pump With Tubing & Manifold Each

Replacement Parts

Part Number Description

SO-110603 Sintered 50 Microns 408M Filter Assembly Each