Excellent Performance & Reliability!

Solinst Model 408 Stainless Steel Double Valve Pumps

The 408 Double Valve Pumps (DVP) are pneumatic drive pumps providing high quality, consistent samples and excellent VOC sample results. No bladder replacement is required and the Double Valve Pump provides higher pumping rates than with the Solinst Bladder Pumps. There is a selection of sizes and materials, variable flow rates and it is field serviceable. The air compressor or tank, pump controller, and flowthrough cell are easily transported to each site with the DVP. Compression fittings, quick-connect, and push-fit connections allow simple attachment to well caps or portable reels.

Features

• Suitable for low flow or regular flow sampling

• Constructed of Stainless Steel

• Two sizes: 5/8" diameter and 1.66" diameter

• Can operate to depths of 500 ft (150 m)

• Portable and dedicated versions are available

• Can be fitted with packers to control groundwater flow and limit purge requirements

• Pumps are not damaged by operation in sediment laden water, or in dry pumping conditions

• Easily disassembled for decontamination in minutes, without any tools

• All components can be cleaned with mild detergent or non-phosphate soap

Grab Sample Kit

Making your liquid sampling quick and easy. Sample from any stream, lake, river, reservoir etc....

Includes

• Telescopic pole

• Purcy clamp

• (8) 1 L Nalgene bottles

• Carrying case

Part

Grab Your Sample!

6 ft - 12 ft Grab Sample Kit

ER-GRBKIT-16 8 ft - 16 ft Grab Sample Kit

Swing Sampler

The Swing Sampler is specifically designed to collect a sample from a horizontal flowing stream, such as a sewer.

Collects water samples quickly and easily!

Horizontal Water Sampler

This newly designed horizontal water sampler allows water to be sampled at specific depths. A 20 m calibrated line, marked at 1 m intervals, is included. The clear acrylic tube allows a visual inspection of the sample prior to dispensing and holds approximately 1,200 ml of sample. Features

• Designed for educational use

• Suitable for sampling fresh, brackish or salt water

• Rugged Stainless Steel components

Features

• The end of the sampler swings allowing collection from different angles including 90°

• Telescopic fiberglass pole extends providing a long length for any sampling situation

Includes

• Telescopic fiberglass pole

• Polyurethane holder

• Plastic snapper ring

• (1) 960 ml polyethylene bottle