Rugged, Portable & Affordable!

dipper-see EXAMINER (Series 2000)

Borehole Inspection Camera

Features

• For viewing & recording in holes 1" & wider

• White polyethylene tape

• ⅞" fully submersible camera probe (IP68) (replaceable) with holder

• External adjustable angle side to side, up/down monitor

• Record video for future playback at the office

• 160° wide viewing angle

• Ultra-bright LEDs

• 5 level LED brightness adjustment

• 7" Display resolution – 600 x 1024

• Batteries (5 hours running time each)

• DVR (with microphone) for audio & video recording

• Modular design for easy service/replacement

Includes

• dipper-see EXAMINER Borehole Inspection Camera

• Centralizer tool

• Retrieval hook

• (2) rechargeable Li-ion battery

• Compact battery charger

• 32GB SD card

• Rugged, wheeled carrying case

Most Portable Borehole Camera In The World!

dipper-See H2GO (Series 2200) Underwater Drop Camera

Features

• 1.25", 1080p HD rechargeable, fully submersible (IP68 camera probe)

• 7 Ultra-Bright Cree™ LEDs with 3 adjustable brightness options

• 170° wide viewing angle

• 100% custom electronics

• 1.25" wide x 7.85" long

• Battery status indication

• Record up to 5 hours of footage on a single charge

• Long term logging mode – leave in the well and record 20 seconds clips every hour for up to a month

• Insert microSD into smartphone/tablet or computer for footage playback

Part Number Description

HE-2200 dipper-See H2GO Underwater Drop Camera

Includes

• dipper-See H2GO Underwater Drop Camera

• Camera probe centralizer (for 4" & 6" Ø holes with #2 Philips screwdriver)

• Polyethylene deployment cord (75 m / 250 ft)

• 64GB microSD + SD Adapter

• USB-C charging cable with wall plug

• Rugged carrying case

HE-2224 Centralizer Kit (Includes: 4" & 6” Replacement Guides & Probe Clamp)

HE-2218 Charging Kit (Includes: Charging Cable & Wall Plug)

HE-2254 Rugged Carry Case Only

HE-2257 Rugged Carry Case With Accessories

HE-5025 75 m / 250 ft Polyethylene Deployment Cord

HE-5026 300 m / 1000 ft Polyethylene Deployment Cord

Glove Box Quick Look Model Low Cost!

EXAMINER (Series 2000)

No Hard Wire Data Transmission = Crystal Clear HD video

H2GO (Series 2200)

Need Help Choosing A Solinst® Water Level Meter?

1. Do you work in applications where you need to monitor falling water levels?

If yes, choose the Model 101D Water Level DrawDown Meter. It works as a Water Level Meter and using a toggle switch, can be changed to a Drawdown Meter where the probe signals in air instead of water. This feature is useful when a well is pumped and clients need to know exactly when a specific depth is reached. Applications include, purging of wells and performing aquifer tests (pumping, slug, etc.) to obtain information on aquifer properties.

2. Are your monitoring wells less than 25 m or 80 ft and is portability a priority?

If yes, choose the 102M Mini Water Level Meter with laser marked cable on a compact reel, small enough to fit in a backpack or small carrying case.

3. Are you working in applications where measurements are needed beyond 300 m or 1000 ft?

If yes, choose the Model 101 P7 Water Level Meter or the 101D Water Level DrawDown Meter with laser marked flat tape in lengths up to 1500 m (5000 ft).

4. Is the access/application narrow (<15 mm or 5/8")?

If yes, choose the Model 102 Water Level Meters with narrow coaxial cable and probe options. The Model 102 with P10 probe should be the Meter of choice for the majority of narrow applications. If access is <10 mm (3/8") ex: the channels of a Solinst CMT Multilevel System, then the P4 probe (4 mm diameter) is required.

5. Is depth sounding the well a requirement (ex: do you need to measure both the static water level and the depth to the bottom of the well (total well depth))

If yes, choose the Model 101 P7, 101D or Model 101B Water Level Meter.

• Best options: Model 101 P7 and 101D, as their probes are pressure-proof the full length of any tape.

• The 101B probe is leak-proof, however, tape lengths only go to 100 m and there is no sensitivity switch to turn the light and buzzer down when submersed.

Note: To help measure total depth in wells deeper than 30 m (100 ft), 101B P1 probe weights can be added to a 101 or 101D tape to help the probes reach bottom more easily.

6. Are you looking for a very basic unit without any extra features (ex: sensitivity adjustment, battery test button)?

If yes, choose the Model 101B Water Level Meter. It is very simple and inexpensive. It is, however, limited to 30 m, 60 m, and 100 m lengths in metric only.