Megadyne catalogus compleet by ERIKS Nederland

PRODUCTS GUIDE

TABLE OF CONTENTS

Production centres

MEGAFLEX PLATINUM

PU truly endless timing belts

ISORAN速 SYNCHRONOUS BELTS Rubber endless timing belts

MEGARIB 11

PU endless Megarib belts

OPEN-END RUBBER SYNCHRONOUS BELTS

Any special pitches,

Custom made and standard pulleys 51

MEGAWELD 31

MEGAFLAT PU and rubber endless flat belts

PULLEYS / CLAMPING PLATES and clamping plate

PV V-RIBBED BELTS Rubber belts

SPECIAL custom made coatings and profiles

V-BELTS Rubber V-belts

Thermoweldable belts

ACCULINK速

PPJ System

Megadyne catalogues

MEGAPOWER PU endless timing belts

MEGALINEAR PU open-end timing belts in rubber

PRODUCTION CENTRES

Megadyne commenced manufacturing transmission belts in 1957. Constant research and development has resulted in the creation of a large range of quality products. This places Megadyne as one of the worlds leading producers of polyurethane belts, rubber belts and pulleys, offering a complete drive system to the market. Megadyne products are suitable for most industrial drive applications, for power transmission, synchronisation, conveying and linear positioning. Manufacturing plants are located in Mathi (Italy), St. Jean de Maurienne (France), Ulm (Germany), Milan (Italy), Pineville (USA), Bondoufle (France), Barcelona (Spain) and Wuxi (China). Megadyne mission statement is: "To constantly strive and achieve the best possible product for all industrial applications”. Megadyne Research and Development department is in constant collaboration with our Customer's Technical departments, supporting existing projects and helping to develop new ones. Our aim is to satisfy all aspects of our Customer's requirements. In order to give techinical support our R & D department is constantly researching new materials and regularly updating production technology. In this way new product development is achieved more efficiently. Local service and technical support are guaranteed by a worldwide distribution network. Megadyne continually expands its global presence through master distributors network. Moreover Megadyne is directly present in: MEGADYNE s.p.a. - Mathi (TO) - ITALY MEGADYNE NORDIC AB - Sollentuna - SWEDEN MEGADYNE AMERICA LLC - Pineville NC - USA MEGADYNE CE - Bydgoszcz - POLAND MEGADYNE CHINA - Foshan Guangdong - CHINA MEGADYNE CZ - Prague - CZECH REPUBLIC MEGADYNE DO BRASIL LTDA - San Paulo - BRAZIL MEGADYNE EE - Minsk - BELARUS

Headquarters - Mathi (ITALY) Full range Polyurethane Timing belts production

Megadyne Rubber SA - Barcelona (SPAIN) Production of high quality rubber timing, PV and V-belts

Megadyne S&D s.r.l. - Milan (ITALY) Production plant for standard and special pulleys

MEGADYNE FRANCE - Bondoufle - FRANCE MEGADYNE GmbH - Borchen - GERMANY MEGADYNE HU KFT - Budapest - HUNGARY MEGADYNE RUBBER - Vilanova I La Geltru˘ (Barcelona) - SPAIN MEGADYNE S&D - Robassomero (TO) - ITALY MEGADYNE UK - Dudley - UK

PRODUCTION CENTRES

Megadyne America LLC - Pineville (USA) Polyurethane open-end timing belts production

Megadyne China - Ningbo (CHINA) Rubber V-belt production

Megadyne China - Quingdao (CHINA) Polyurethane extruded belts production

Megadyne France SA - Bondoufle (FRANCE) Special pulleys production

Megadyne France - S.te Jean de Maurienne (FRANCE) - Polyurethane moulded endless timing belts production

Megadyne GmbH - Ulm (GERMANY) Polyurethane and rubber endless flat belts production

In North America, Jason Industrial Inc. has been a trusted name for Industrial Rubber, Urethane and Thermoplastic Solutions for over 50 years. As a Manufacturer and Marketer, Jason Industrial has grown exponentially producing and supplying V-belts, Synchronous belts, Sheaves & Bushings, Industrial Hose, Couplings and Skirtboard Rubber to Industrial and Power Transmission Distributors and Original Equipment Manufacturers. Jason Industrial has a network of well stocked warehouses in New Jersey, Chicago, Tampa, Dallas, Los Angeles and Portland, ALL with complete Customer Service and logistics resources to assist customer. At the same time, Jason B2B website at jasonindustrial.com is open and accepting online inquiries.

Jason Industrial is directly present in: JASON INDUSTRIAL INC. - Fairfield - NJ - USA JASON Distribution Center - Carol Stream - IL - USA JASON INDUSTRIAL INC. - Irving - TX - USA JASON INDUSTRIAL INC. - Los Angeles - CA - USA JASON INDUSTRIAL INC. - Tampa - FL - USA JASON INDUSTRIAL INC. - Portland - OR - USA

Corporate Office-Fairfield - NJ (USA)

Central Warehouse - Carol Stream - IL (USA)

T.B.M.C. - Greenville - SC (USA) Production plant for rubber timing belt

JASON DO BRASIL LTDA - Sorocaba - Sao Paulo - BRAZIL JASON INDUSTRIAL CANADA LTD - Quebec - CANADA JASON INDUSTRIAL CANADA LTD - Ontario - CANADA JASON INDUSTRIAL CANADA LTD - Alberta - CANADA JASON INDUSTRIAL S.DER.L.DEC.V. Azcapotzalco - MEXICO

For your Industrial Hose & Coupling needs, Jason offers a wide selection of Rubber, Thermoplastic and PVC Hose for application in Air, Food Processing, Water, Petro-Chemical and Mining. Pre-coupled and packaged lengths of PVC and Rubber Air Hose, Mill Hose and Jackhammer Hose is readily available from all Jason Industrial warehouses. Jason also maintains a vast line of Cam & Groove Couplings, Clamps, Pin Lugs, Flanges, Nozzles, Nipples, Strainers and related accessories.

In June 2008, Jason moved into a new 56,000 sq. ft. Distribution Center in Carol Stream, IL. This brand new facility will provide rapid inventory replenishment of existing Jason warehouses coupled with streamlined ordering and daily direct shipments of complete Hose & Coupling orders to a growing number of existing and new distributors in North America.

MEGAFLAT PU and rubber endless ďŹ&#x201A;at belts

MEGAFLAT PU and rubber endless ﬂat belts

MEGAFLAT belts are truly endless mandrel moulded, available in both polyurethane or chloroprene rubber, with either polyester, aramide or cotton reinforcements. Standard sleeves are available 330 mm wide. These belts have the following features: – High flexibility – Small pulley diameters – Dimensional accuracy – High speed – Energy efficient – Low noise and vibration – Low maintenance – Good chemical and ozone resistance – High friction surface MEGAFLAT belts are particularly suitable for both power transmission and conveying.

TENSILE REINFORCEMENT INSTALLATION TENSION x cm WIDTH (N) ENDLESS MIN. PULLEY DIA. mm THICKNESS mm

T 75

T 150

T 200

Polyester fabric

150

300

400

0,5

0,9

1,1

STANDARD LENGTH mm

200/3850

COATING MATERIAL

NEOPRENE

YES

ANTISTATIC

P 102

P 108

P 110

No fabric

Elastic fabric/nylon

Polyester/cotton

Polyester fabric

INSTALLATION TENSION x cm WIDTH (N) ENDLESS

–

200

150

MIN. PULLEY DIA. mm

TENSILE REINFORCEMENT

THICKNESS mm STANDARD LENGTH mm COATING MATERIAL ANTISTATIC

0,9

1,8

0,8

240/1200

240/2500

240/3850

POLYURETHANE

POSSIBLE

P 120

P 155

S 110

Polyester fabric

Aramid/polyester

Polyester fabric

INSTALLATION TENSION x cm WIDTH (N) ENDLESS

350

400

125

MIN. PULLEY DIA. mm

TENSILE REINFORCEMENT

THICKNESS mm STANDARD LENGTH mm COATING MATERIAL ANTISTATIC

1,5

1,0

240/3850

POLYURETHANE

SILICON

POSSIBLE

MEGAPOWER PU endless timing belts

MEGAPOWER timing belts are manutactured by a unique thermoset moulding process. The high-grade polyurethane gives excellent abrasion and shear resistance, combined with a variety of graded steel cords, ensuring high strength and tractive resistance. The result is a timing belt with excellent dimensional stability. Megapower moulded timing belts are manufactured to a tight tolerance range, which assures consistent lenght and thickness. The combination of these factors results in Megapower, performing to the highest physical and chemical levels. Special compounds and cords have to be tested and homologated on the application. Megadyne is not responsable for wrong functioning of special products. MEGAPOWER PU belts are suitable for high power, precision motion and control even with high speed. These belts have the following features: MECHANICAL features – Consistent dimensional stability – Low pre-tension – Low noise – High abrasion resistance – Low maintenance – High flexibility – Linear speeds up to 80 m/sec CHEMICAL features – Good resistance to

– Aging, – Hydrolisis, – UVA rays, – Ozone – Working temperature: -25 °C to +80 °C (up to +110 °C for short periods) – High resistance to oils, fats and greases – Good resistance to most acids and Alkalis MEGAPOWER PU belts perform especially well on light synchronised and stepped drives, in office automation and domestic appliance applications.

MEGAPOWER PU endless timing belts

T2.5

T2 - T2.5 - T5 - T10

Std. width

(mm)

10/12/16/20/25/32/50/75

4/6/8/10/12

T2.5

T10

T2.5 DL

Pitch length (mm) 120 145 160 177,5 180 182,5 200 210 230 245 265 277,5 285 290 305 317,5 330 342,5 380 420 480 500 540 600 620 650 680 700 780 880 915 950 1185

2,5

1,3

0,7

T2 AT5 - AT10

T2.5 DL Std. width

(mm)

6/8/10/12/16/20/25

120 145 160 177,5 180 182,5 200 210 230 245 265 277,5 285 290 305 317,5 330 342,5 380 420 480 500 540 600 620 650 680 700 780 880 915 950 1185

T2.5 DL - T5 DL - T10 DL

T10 Std. width

(mm)

4/6/8/10/12

Code

T5 - T10* available without nose

T5 Std. width

(mm)

Std. width

(mm)

4/6/8/10/12

T2 Code 180 200 288

Pitch length (mm) 180 200 288

1,1

0,5

MXL - XL - L - H

Code

Pitch length (mm)

Code

Pitch length (mm)

120 150 165 180 185 200 210 215 220 225 245 250 255 260 270 275 280 295 300 305 330 340 350 355 365 375 390 400 410 420 425 440 445 450 455 460 475 480 500 510 515 515* 525 545 550 560 560* 575 590 600 610 620 630 640 650 660 675 690 700 720 725 750 765 780 800 815 830 840 850 860 885 900 920 940 990 1075 1100 1160 1200 1215 1275 1280 1315 1355 1380 1440 1470 1500 1580 1955

260 320 340 370 390 400 410 440 450 480 500 530 550 560 600 600* 610 630 630* 650 660 680 690 700 720 720* 730 750 780 800* 810 840 850 880 890 900 900* 910 920 920* 950 960 970 980 1000 1010 1050 1080 1100 1110 1140 1150 1200 1210 1240 1250 1300 1320 1350 1390 1400 1420 1440 1450 1460 1500 1560 1600 1610 1700 1750 1780 1880 1960 2250

Code 457,5 DL

Pitch length (mm) 457,5

2,5

1,3

0,7

T5 DL Std. width

(mm)

6/8/10/12/16/20/25

T5 DL Code

Pitch length (mm)

410 DL 460 DL 515 DL 525 DL 550 DL 590 DL 620 DL 685 DL 700 DL 750 DL 815 DL 840 DL 860 DL 940 DL 1100 DL

410 460 515 525 550 590 620 685 700 750 815 840 860 940 1100

2,2

1,2

T10 DL Std. width

(mm)

10/12/16/20/25/32/50/75

T10 DL Code 260 DL 530 DL 630 DL 660 DL 700 DL 720 DL 800 DL 840 DL 900 DL 920 DL 980 DL 1010 DL 1100 DL 1150 DL 1210 DL 1240 DL 1250 DL 1320 DL 1350 DL 1420 DL 1610 DL 1880 DL

Pitch length (mm) 260 530 630 660 700 720 800 840 900 920 980 1010 1100 1150 1210 1240 1250 1320 1350 1420 1610 1880

2,2

4,5

1,2

2,5

MEGAPOWER PU endless timing belts

AT5 Std. width

AT10 Std. width

(mm)

MXL Std. width

(mm)

XL Std. width

(mm)

Std. width

(mm)

Std. width

(mm)

6/8/10/12/16/20/25

10/12/16/20/25/32/50/75

3,2/4,8/6,4

6,4/7,9/9,4

12,7/19,1/25,4

19,1/25,4/38,1/50,8/76,2

AT5

AT10

MXL

Code

Pitch length (mm)

225 255 275 280 300 330 340 375 390 420 450 455 480 500 525 545 600 610 620 630 660 670 710 720 750 780 825 860 975 1050 1125 1500 2000

2,7

1,2

Code 370 500 560 580 600 610 630 660 700 730 780 800 810 840 880 890 920 960 980 1000 1010 1050 1080 1100 1150 1190 1200 1210 1220 1230 1240 1250 1280 1300 1320 1350 1360 1400 1420 1480 1500 1600 1630 1700 1720 1800 1860 1940

Pitch length (mm) 370 500 560 580 600 610 630 660 700 730 780 800 810 840 880 890 920 960 980 1000 1010 1050 1080 1100 1150 1190 1200 1210 1220 1230 1240 1250 1280 1300 1320 1350 1360 1400 1420 1480 1500 1600 1630 1700 1720 1800 1860 1940

4,5

2,5

Code 80055 80057 80060 80070 80072 80075 80076 80079 80080 80082 80088 80091 80092 80096 80101 80102 80103 80105 80110 80114 80118 80120 80130 80132 80135 80140 80145 80150 80155 80175 80190 80200 80221 80256 80280 80285 80308 80332 80352 80360 80395 80405 80412 80432 80454 80485

Pitch length (mm) 111,7 115,8 121,9 142,2 146,3 152,4 154,4 160,5 162,5 166,6 178,8 184,9 186,9 195,1 205,2 207,2 209,2 213,3 223,5 231,6 239,7 243,8 264,1 268,2 274,3 284,4 294,6 304,8 314,9 355,6 386,5 406,8 449,1 520,1 568,9 579,1 625,8 674,6 715,2 731,5 802,6 822,9 837,1 877,8 922,5 985,5

2,032

1,2

0,51

Code 60 70 76 80 90 100 110 120 130 134 140 150 160 170 180 190 194 200 210 220 230 240 250 260 270 288 290 300 356 414 450 566

Pitch length (mm) 152,4 177,8 193,0 203,2 228,6 254,0 269,4 304,8 330,2 340,3 355,6 381,0 406,4 431,8 457,2 482,6 492,7 508,0 533,4 558,8 584,2 609,6 635,0 660,4 685,8 731,5 736,6 762,0 904,2 1051,5 1143,0 1437,6

5,080

2,25

1,25

Code 86 124 150 173 187 202 210 225 240 255 270 285 300 322 345 367 390 420 450 480 510 540 570 600

Pitch length (mm) 218,6 314,3 381,0 438,1 476,2 514,4 533,4 571,5 609,6 647,7 685,8 723,9 762,0 817,9 876,3 933,4 990,6 1066,8 1143,0 1219,2 1295,4 1371,6 1447,8 1524,0

9,525

3,6

1,9

Code 230 240 270 300 330 360 390 420 450 480 510

Pitch length (mm) 584,2 609,6 685,8 762,0 838,2 914,4 990,6 1066,8 1143,0 1219,2 1295,4

12,7

4,3

2,29

MEGALINEAR PU open-end timing belts

MEGALINEAR open length timing belts are manufactured in thermoplastic polyurethane, that gives superior wear and abrasion resistance. Various grades of steel cords offer good running characteristics, even with high tractive loads. Manufactured to tight tolerances, Megalinear delivers reliability and excellent dimensional stability. The addition of a Nylon coating on the tooth and/or the back of the belt during production, enhances the running properties for specific applications. An extra thickness of polyurethane is also possible on the back of the belt, offering extra protection against aggressive or heavy products. MEGALINEAR offers the following features: MECHANICAL features – Consistent dimensional stability – Low pre-tension – Low noise – High abrasion resistance – Low maintenance – High flexibility – Linear speeds up to 80 m/sec – High precision linear positioning CHEMICAL features – Good resistance to

– – – –

– Aging, – Hydrolisis, – UVA rays, – Ozone Working temperature: -25 °C to +80 °C (up to +110 °C for short periods) High resistance to oils, fats and greases Good resistance to most acids and Alkalis Compatible for fabrication with other thermoplastic materials

MEGALINEAR can be supplied as open length rolls, or as endless jointed belts. OPEN LENGTH Belts These are manufactured as continuous lengths, with the reinforcement in a parallel configuration. Standard roll lengths are 50 or 100 metres. Other lengths available on request. MEGALINEAR belts as an open length are normally used in linear motion drives. ENDLESS JOINTED belts By jointing using the thermoplastic properties of the open length belt, endless belts can be produced to any length by welding. The finished joint is resistant to fatigue from flexing and tension, due to the unique symmetrical Vee shaped pattern of the joint. Endless jointed belts are suitable for conveying applications, particularly when indexing and/or positive drive is required. Supplementary application of flights, profiles and coatings is possible, to suit specific applications. MEGALINEAR is also available with alternative reinforcement cords such as, Keviar (K), High Flex (HF), High Performance (HP) and High Performance Flex (HPF).

MEGALINEAR PU open-end timing belts

MTD 3M

T2,5 - T5 - T10 - T20

Std. width

MTD 5M Std. width

(mm)

10 20 25 50

MTD 8M Std. width

(mm)

10 15 25 50

MTD 14M Std. width

(mm)

10 15 20 30 50 85 100

(mm)

25 40 55 85 100 115

AT3 - AT5 - AT10 - AT20 P

2,2

3,6

5,6

1,13

2,1

3,4

RPP5

MTD 3M - MTD 5M - MTD 8M - MTD 14M

Std. width

RPP8 Std. width

(mm)

10 15 25 30 50 75

6,1

RPP14 Std. width

(mm)

10 15 20 30 50 85 100

(mm)

40 55 85 115 150

STD 5M - STD 8M P

3,8

5,4

3,2

TG5 K6

RPP5 - RPP8 - RPP14

Std. width

TG10 K6 Std. width

(mm)

25 32 50

(mm)

TG10 K13

TG20 K13

Std. width

(mm)

25 32 50 75 100

(mm)

50 75 100

MXL - XL - L - H - XH

P1 - P2 - P4

2,2

1,2

ATG5 K6 Std. width

2,5

3,3

ATG10 K13 Std. width

(mm)

25 32 50

2,7

1,2

4,5

2,5

13 6,5

ATG20 K13 Std. width

(mm)

25 32 50 75 100 150

TG5 - TG10 - TG20 - ATG5 - ATG10 - ATG20 - HG

4,5

5,5

HG K13 Std. width

(mm)

75 150

(inches)

1,50 2,00 3,00 4,00

12,7

4,5

4,3

2,5

2,29

6,4

13 6,29

MEGALINEAR PU open-end timing belts

MXL Std. width

XL Std. width

(inches)

0.17 0.37 0.50

L Std. width

(inches)

0.25 0.37 0.50 0.75 1.00 1.50 2.00

H Std. width

(inches)

0.37 0.50 0.75 1.00 1.50 2.00 4.00

H* (inches)

Std. width

0.50 0.75 1.00 1.50 2.00 3.00 4.00 6.00

XH (inches)

Std. width

8.00 20.00

(inches)

1.00 1.50 2.00 3.00 4.00 6.00

2,032

5,08

9,525

12,7

22,225

1,14

2,3

3,6

4,3

11,2

0,66

1,27

1,90

2,29

T2,5 Std. width

T5 (mm)

T10

Std. width

10 16 20

(mm)

T10*

Std. width

6 10 16 25 32 50 75 100

(mm)

Std. width

12 16 25 32 50 75 100 150

T20 Std. width

(mm)

200 250 300 400 450 500

(mm)

25 32 50 75 100 150

2,5

1,3

2,2

4,5

0,7

1,2

2,5

AT3 Std. width

AT5 Std. width

(mm)

10 20 25 50

AT10

6 10 16 25 32 50 75 100

1,9

2,7

1,1

1,2

4,5

2,5

(mm)

10 12 15 20 30 50 85

3,4

5,1

1,91

3,05

P2 Std. width

(mm)

10 20

(mm)

25 32 50 75 100 150 200

STD 8M Std. width

(mm)

10 15 25 50

Std. width

AT20 Std. width

(mm)

16 25 32 50 75 100 150

STD 5M

Std. width

(mm)

Std. width

6,35

P4 Std. width

(mm)

25 50 75 100

(mm)

25 50 100

*Only with kevlar cords and reduced number of cords

MEGAFLEX PU truly endless timing belts

MEGAFLEX TIMING BELTS are manufactured in thermoplastic polyurethane, with continuous spiral steel cords. This type of belt, developed by our Research & Development, offers good running characteristics and high traction loads. They are especially suited for power transmission and conveying with high loads and high speeds (up to 10.000 RPM). The addition of a nylon coating on the teeth during production enhances the running properties for specific applications and reduces the noise frictional coefficient. An extra thickness of special coating is also possible on the back of the belt offering extra protection against aggressive or heavy products. Megaflex belts are truly endless, enabling them to deliver exceptional performance.

MEGADYNE MEGAFLEX TIMING BELTS ARE AVAILABLE FROM 1.500 UP TO 22.700 mm LENGTH.

MEGAFLEX Special constructions – – – –

High flex cords (NFT) nylon fabric on the teeth (available from 1.900 mm length) Custom milling, grinding and drilling to specification Additional continuos coatings on the back of the belt in: – – – – – –

PU 85° ShA Tenax 50° ShA Linatex 40° ShA Yellow PUR 60° ShA Grey PUR 60° ShA Neoprene rubber 70° ShA

Other hardnesses available on request.

MEGAFLEX PU truly endless timing belts

T5 - T10 - T20

T5 DL - T10 DL - T20 DL

AT5 - AT10 - AT20

AT5 DL - AT10 DL - AT20 DL

XL - L - H - XH

XL DL - L DL - H DL - XH DL

RPP5 - RPP8 - RPP14

RPP5 DL - RPP8 DL - RPP14 DL

MTD 8M

P2 Std. width

ATG10 K13 Std. width

(mm)

25 50 75 100 150

ATG10

2,0

MTD 8M Std. width

(mm)

10 16 25 32 50 75 100 150

(mm)

10 16 25 32 50 75 100 150

4,5

5,6

2,5

3,4

B h

13 6,4

MEGAFLEX PU truly endless timing belts

T5/T5DL Std. width

T10/T10DL Std. width

(mm)

10 16 25 32 50 75 100 150

2,2

1,2

3,4

AT5/AT5DL Std. width

4,5

2,5

AT10/AT10DL Std. width

(mm)

2,7

1,2

3,9

RPP5/RPP5DL

Std. width

4,5

2,5

Std. width

10 15 20 25 50 85 100 150

(mm)

10 16 25 32 50 75 100 150

RPP8/RPP8DL

(mm)

AVAFC - PU 85 shore A, extruded on back.

AT20/AT20DL

(mm)

10 16 25 32 50 75 100 150

(mm)

10 16 25 32 50 75 100 150

Std. width

T20/T20DL Std. width

(mm)

NFT - Nylon fabric on teeth low friction and noise.

RPP14/RPP14DL Std. width

(mm)

10 15 20 25 50 85 100 150

(mm)

10 15 20 25 50 85 100 150

3,8

5,4

3,2

5,2

7,8

14,5

XL/XLDL Std. width

L/LDL Std. width

(mm)

12,7 19,1 25,4 38,1 50,8 76,2 101,6 152,4

Double teeth version.

H/HDL Std. width

(mm)

12,7 19,1 25,4 38,1 50,8 76,2 101,6 152,4

XH/XHDL Std. width

(mm)

12,7 19,1 25,4 38,1 50,8 76,2 101,6 152,4

(mm)

12,7 19,1 25,4 38,1 50,8 76,2 101,6 152,4

5,08

9,525

12,7

22,225

2,3

3,6

4,3

11,2

1,27

1,9

2,29

6,35

3,05

4,58

5,95

15,49

MEGARIB PU endless Megarib belts

MEGARIB belts are manufactured in polyurethane with polyester high tension cords, which combine the high flexibility of flat belts with the power transmission capability of v-belts. These belts have the following features – Dimensional stability – High flexibility – Small pulley diameters – High speeds – Excellent oil, water and ozone resistance The main applications are – Food processors – Grass cutting equipment – Electrical household appliances – Washing machines – Electrical tools – Woodworking equipment – Domestic power tolls

On request, special elastic Megarib belts can be manufactured in polyurethane with a semi-elastic tension member. They can be fitted on fix centre drives, riducing noise and vibrations. The absence of a tensioning mechanism, offers additional cost savings. Standard Megarib belts are available in a wide variety of rib pitches and length (see below).

TB2

Standard length

(mm) 223 261 295 330 340 375 389 400 410 485 507 588 602 609 650 768 935 1000 1086 1120 1163 1203 1240 1775 1976

(mm) 156 170 200 220 231 248 266 295 310 327 330 345 360 380 390 400 430 480 510 526 535 598 630 660 675 725 770 1186

J (mm) 220 271 275 278 283 288 304 330 345 356 381 392 406 431 444 457 483 508 558 610 660 681 711 762 864 914 953 1010 1086 1120 1163 1202 1239 1268 1397

TB2

(inches) 87 107 108 110 112 114 120 130 135 140 150 154 160 170 175 180 190 200 220 240 260 268 280 300 340 360 376 398 428 440 458 474 488 500 590

SPECIAL Any special pitches, custom made coatings and proďŹ les

SPECIAL Any special pitches, custom made coatings and proďŹ les All SPECIAL belts can be manufactured in a standard or coated execution, according to customer specific requirements.

Cleat welding machine

Example of belts with cleats welded on the back. Many different types of cleat are available

Joining press

PULLEYS / CLAMPING PLATES Custom made and standard pulleys and clamping plates

PULLEYS / CLAMPING PLATES Custom made and standard pulleys and clamping plates Megadyne can supply the complete drives. We can provide, either standard pulleys, made in according to ISO spec and customer specific requirements.

Imperial

MXL - XL - L - H - XH - XXH - HG

HTD

3M - 5M - 8M - 14M

METRIC

T2.5 - T5 - T10 - T20 - AT3 - AT5 - AT10 AT20 - TG5 - TG10 - TG20 - ATG10

RPP

RPP5 - RPP8 - RPP14

EUROPE MIDDLE EAST AFRICA

MEGADYNE HEADQUARTERS Via Trieste 16, 10075 Mathi (TO) - ITALY mail@megadyne.it www.megadyne.it

MATHI (Italy)* TURIN (Italy) VENICE (Italy) MILAN (Italy)* MINSK (Belarus) PRAGUE (Czech Republic) PARIS (France) ST. JEANNE DE MAURIENNE (France)* LYON (France) BORCHEN (Germany)* ULM (Germany) BUDAPEST (Hungary) BYDGOSZCZ (Poland) BARCELONA (Spain)* DUDLEY (UK) STOCKHOLM (Sweden)

AMERICAS FAIRFIELD, NJ (U.S.A.) CAROL STREAM, IL (U.S.A.) BELL, CA (U.S.A.) TAMPA, FL (U.S.A.) IRVING, TX (U.S.A.) PORTLAND, OR (U.S.A.) CHARLOTTE, NC (U.S.A.)* GREENVILLE, SC (U.S.A.)* DORVAL, Quebec (Canada) MISSISAUGA, Ontario (Canada) EDMONTON, Alberta (Canada) AZCAPOTZALCO (Mexico) SAO PAULO (Brazil) SOROCABA - SAO PAULO (Brazil) CHINA FAR EAST HONG KONG NINGBO (P.R.C.)* QINGDAO (P.R.C.)* SHANGHAI (P.R.C.) FOSHAN (P.R.C.) BEIJING (P.R.C.) *MANUFACTURING FACILITIES

Alkmaar 1812 RM Alkmaar T (072) 514 17 17 F (072) 514 16 25 E esc.alkmaar@eriks.nl

Den Haag Neckar 2 2491 BD Den Haag T (070) 381 84 84 F (070) 381 84 36 E denhaag@eriks.nl

Gouda Marconistraat 117 2809 PG Gouda T (0182) 33 11 60 F (0182) 37 82 02 E gouda@eriks.nl

Rotterdam-Noordwest Caïrostraat 80 3047 BC Rotterdam T (010) 245 50 55 F (010) 262 00 38 E rotterdam@eriks.nl

Almelo Plesmanweg 12 7602 PE Almelo T (0546) 87 30 70 F (0546) 87 32 68 E almelo@eriks.nl

Doetinchem Havenstraat 55 7005 AG Doetinchem T (0314) 34 37 20 F (0314) 34 37 41 E doetinchem@eriks.nl

Hengelo Hassinkweg 16 7556 BV Hengelo T (074) 291 57 57 F (074) 291 59 39 E hengelo@eriks.nl

Tilburg Ellen Pankhurststraat 9 5032 MD Tilburg T (013) 571 45 61 F (013) 570 06 42 E tilburg@eriks.nl

Almere Rondebeltweg 32 1329 BB Almere T (036) 538 73 00 F (036) 538 73 10 E almere@eriks.nl

Ede Galvanistraat 34 6716 AE Ede T (0318) 43 96 14 F (0318) 64 01 04 E ede@eriks.nl

Hoorn De Factorij 35 d 1689 AK Zwaag T (0229) 21 28 82 F (0229) 21 93 74 E hoorn@eriks.nl

Venlo Willem Barentszweg 20 5928 LM Venlo T (077) 396 12 50 F (077) 382 69 03 E venlo@eriks.nl

Amsterdam Dynamostraat 46 1014 BK Amsterdam T (020) 448 96 10 F (020) 613 77 65 E amsterdam@eriks.nl

Eerbeek Loubergweg 19 6961 EJ Eerbeek T (0313) 67 95 00 F (0313) 65 47 68 E eerbeek@eriks.nl

Leeuwarden James Wattstraat 19 8912 AS Leeuwarden T (058) 215 05 87 F (058) 215 85 16 E leeuwarden@eriks.nl

Zwolle Ampèrestraat 27 8013 PT Zwolle T (038) 467 29 20 F (038) 467 29 29 E zwolle@eriks.nl

Arnhem Pieter Calandweg 46 6827 BK Arnhem T (026) 362 92 44 F (026) 361 00 63 E arnhem@eriks.nl

Eindhoven De Witbogt 22 a 5652 AG Eindhoven T (040) 291 19 00 F (040) 291 19 09 E eindhoven@eriks.nl

Maastricht Amerikalaan 28 6199 AE Maastricht T (043) 604 91 80 F (043) 363 87 28 E maastricht@eriks.nl

Bergen op Zoom Van Konijnenburgweg 44 b 4612 PL Bergen op Zoom T (0164) 27 55 44 F (0164) 27 55 49 E bergenopzoom@eriks.nl

Emmen Willem Schoutenstraat 11 7825 VV Emmen T (0591) 66 80 00 F (0591) 66 80 06 E emmen@eriks.nl

Roermond Thomas Alva Edisonweg 5 6045 GN Roermond T (0475) 37 22 70 F (0475) 37 23 05 E roermond@eriks.nl

Delfzijl Deltaweg 30 9936 HK Farmsum T (0596) 63 38 20 F (0596) 63 38 29 E delfzijl@eriks.nl

Groningen Rouaanstraat 8 9723 CD Groningen T (050) 368 49 99 F (050) 368 49 98 E groningen@eriks.nl

Rotterdam-Botlek Shannonweg 33 Haven 5079 3197 LG Rotterdam-Botlek T (010) 231 34 00 F (010) 296 96 18 E rijnmond@eriks.nl

www.eriks-aandrijftechniek.nl Roermond Albert Einsteinweg 8 6045 GX Roermond

T (0475) 37 22 33 F (0475) 37 75 40 E info@eriks-at.nl

© Mits voorzien van duidelijke bronvermelding is overname uit deze publicatie toegestaan. Alle rechten worden door ERIKS nadrukkelijk voorbehouden. No part of this publication may be reproduced without clear reference to the source. All rights expressly reserved by ERIKS aandrijtechniek

ERIKS Servicecenters