The ‘no more lube’ range
www.renold.com
2
I Renold Syno Chain
Renold Syno™ Chain Three solutions, one aim. No more lube! If it’s an easy life you want, if lubrication causes you problems, then Renold has the answer! The Renold Syno range sets a new benchmark for chain performance with little or no lubrication. Covering both small and large pitch sizes, Renold has tailored its technology to suit your requirements with a range of three different products under the Renold Syno name.
Nickel-plated
Nickel-plated For use in hygiene-sensitive applications or situations where contamination from lubricant is to be avoided, Renold Syno Nickel Plated chain displays all the characteristics you need from a chain. With a food industry-approved lubricant within the sintered bush, this chain will in almost all instances not need relubricating. The roller coating is also suitable for use in the food industry; a unique feature on any chain.
Available in boxed 10-foot lengths from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter, this means that Renold Syno Nickel Plated chain is dimensionally interchangeable with standard roller chain and is even compatible with standard sprockets. With the kind of excellent wear and fatigue resistance that you expect from a Renold chain, Syno Nickel Plated chain outlasts any competitor product promoted as low-lube or non-lube. Already tried and tested by major companies in the food sector and elsewhere, if you have to operate with minimal lubrication but can’t compromise on performance, we can boost your productivity, cut your downtime and save you time and money.
• No lubrication normally required • Outside of chain totally dry-to -the-touch • Nickel-plated plates • Food industry-approved lubricant within the sintered bush • Unique food industry-approved roller coating • Dimensionally interchangeable with standard chain • ISO standard pin diameter, therefore standard attachments on outer links
Renold Syno Chain
Syno PC chain
Syno PC chain Renold has added to its impressive Syno range of chain for applications where lubrication is either difficult or impractical. The latest element is the introduction of a poly-steel chain, Renold Syno PC chain, comprising a polymer inner link and stainless steel pins and outer plates.
With no metal bush or roller there is no lubricant required to facilitate metal-on -metal movement. This opens up applications where the chain could even run submerged in water if required.
• No lubrication required
This construction also means the chain is corrosion resistant, light weight and versatile. Attachments can be fitted to the outer plates if required.
• Attachments can be added
• Can operate in wet conditions, even submerged • Lightweight construction
Polymer Bush
Polymer Bush For more heavy-duty applications, the Renold Syno range takes on the serious business of wear and fatigue resistance through the addition of a polymer sleeve between the pin and bush. This highly durable and wear resistant polymer – specifically developed for Renold – removes metal-on-metal wear in this key area of the chain. Available in 28B – 40B and ANSI 120 to 200 and ideal for applications where it is not possible or not advisable to lubricate a chain, Renold Syno Polymer Bush chain can be considered for:
• Outdoor or wash down environments • Car assembly plants or steel mills • Environments where lubrication may contaminate products • Forestry, saw mills or paper mills • Environments where lubrication may cause contaminants to stick to the chain and possibly get into bearing areas, seizing up the chain • Textile plants • Mixers
With a corrosion resistant surface treatment adding to the variety of applications it can cope with, Renold Syno Polymer Bush chain is a truly versatile product. • Sizes from 28B to 40B and from ANSI 120 to 200 • Revolutionary polymer bush • Superior corrosion resistance surface treatment • Ideal for outdoor environments • Attachments available • Polymer roller available on request
I3
4
I Renold Syno Chain
Renold Syno Ideal for all these applications
Food
Packaging
Sawmills
For food processing environments, cleanliness is critical; the Renold Syno range is ideal for this. Think of the ways your application could benefit.
Packaging must be transported without contamination, think “Syno� and your problems are solved.
Heavy loads, dirt and grime are all to be expected in sawmills. Lubrication will attract this kind of debris causing a dramatically shortened working life. Syno Polymer Bush chain shows other chains the way!
Paper Bottling Chain used in bottling applications benefits from corrosion resistance and lubrication considerations are key.
The printing industry goes to great lengths to ensure their output is protected from grease and dirt. Choose Renold Syno for a clean environment. Textile No stain removal required when you specify Renold Syno chain for use in textile manufacturing environments.
Car assembly Car assembly lines are an example of the need for no lubricant contamination to vehicle panels or interiors. Syno Polymer Bush chain is lubricant-free and can take the strain without the squeaking noise made by other chain brands.
Renold Syno Chain
I5
Renold Syno速 Nickel Plated European (BS) Standard / ISO 606 / ANSI Standard
Chain Ref. Renold Chain No.
No.4
No. 26
No. 107
No. 12
No. 11
No. 30
Technical Details (mm) ISO Ref.
Pitch (inch)
Pitch (mm)
Connecting Links
Inside Width
Roller Diam.
Plate Height
Plate Width Inner
Plate Width Outer
Pin Diam.
Pin Length
Conn. Link Extension
Transverse Pitch
MIN
MAX
MAX
MAX
MAX
MAX
MAX
MAX
NOM
ISO606 Tensile Strength
Weight
(Newtons)
kg/m
No. 4
No. 107
No. 11
No. 26
No. 12
No. 30
MIN
European (BS) Standard - Simplex 06B1SN 08B1SN 10B1SN 12B1SN 16B1SN 20B1SN 24B1SN
06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1
A
A
B
C
D
E
F
G
H1
J
K
0.375 0.500 0.625 0.750 1.000 1.250 1.500
9.525 12.700 15.875 19.050 25.400 31.750 38.100
5.72 7.75 9.65 11.68 17.02 19.56 25.40
6.35 8.51 10.16 12.07 15.88 19.05 25.40
8.20 11.70 14.60 16.00 20.20 25.30 33.40
1.29 1.81 2.04 2.42 3.76 4.46 6.08
1.04 1.55 1.55 1.81 3.06 4.16 4.88
3.28 4.45 5.08 5.72 8.27 10.17 14.63
12.5 17.0 19.6 23.6 35.0 41.4 52.6
1.1 2.0 1.4 2.5 3.0 2.1 5.1
-
8900 17800 22200 28900 60000 95000 160000
0.40 0.73 1.01 1.30 2.72 3.75 7.35
-
16900 31100 44500 57800 106000 170000 280000
0.76 1.40 1.93 2.47 5.40 7.06 14.70
-
13900 21800 31300 55600 87000
0.67 1.12 1.73 2.90 3.61
-
27800 43600 62600 111200 174000
1.30 2.11 3.46 5.60 6.95
-
European (BS) Standard - Duplex 06B2SN 08B2SN 10B2SN 12B2SN 16B2SN 20B2SN 24B2SN
06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2
A
A
B
C
D
E
F
G
H2
J
K
0.375 0.500 0.625 0.750 1.000 1.250 1.500
9.525 12.700 15.875 19.050 25.400 31.750 38.100
5.72 7.75 9.65 11.68 17.02 19.56 25.40
6.35 8.51 10.16 12.07 15.88 19.05 25.40
8.20 11.70 14.60 16.00 20.20 25.30 33.40
1.29 1.81 2.04 2.42 3.76 4.46 6.08
1.04 1.55 1.55 1.81 3.06 4.16 4.88
3.28 4.45 5.08 5.72 8.27 10.17 14.63
23.0 30.9 36.2 43.1 66.8 77.8 101.0
1.1 2.0 1.4 2.5 3.0 2.1 5.0
10.24 13.92 16.59 19.46 31.88 36.45 48.36
A
A
B
C
D
E
F
G
H1
J
K
0.500 0.625 0.750 1.000 1.250
12.700 15.875 19.050 25.400 31.750
7.85 9.40 12.57 15.75 18.90
7.92 10.16 11.91 15.88 19.05
11.70 14.60 17.50 23.00 25.30
1.76 2.42 3.23 4.06 4.46
1.55 2.04 2.45 3.06 4.16
3.97 5.08 5.95 7.92 9.53
16.9 21.1 27.0 33.7 40.6
2.0 2.5 2.5 3.1 3.5
-
A
A
B
C
D
E
F
G
H2
J
K
0.500 0.625 0.750 1.000 1.250
12.700 15.875 19.050 25.400 31.750
7.85 9.40 12.57 15.75 18.90
7.92 10.16 11.91 15.88 19.05
11.70 14.60 17.50 23.00 25.30
1.76 2.42 3.23 4.06 4.46
1.55 2.04 2.45 3.06 4.16
3.97 5.08 5.95 7.92 9.53
31.3 39.2 49.8 63.0 76.4
2.0 2.5 2.5 3.1 3.5
14.38 18.11 22.78 29.29 35.76
ANSI Standard - Simplex 40A1SN 50A1SN 60A1SN 80A1SN 100A1SN
40-1 50-1 60-1 80-1 100-1
ANSI Standard - Duplex 40A2SN 50A2SN 60A2SN 80A2SN 100A2SN
40-2 50-2 60-2 80-2 100-2
Renold Chain products that are dimensionally in line with the ISO standard far exceed the stated ISO minimum tensile strength requirements. However Renold does not consider breaking load to be a key indicator of performance because it ignores the principal factors of wear and fatigue. In these areas, Renold products are designed to produce the best possible results and independent testing proves this. In this catalogue, where the ISO breaking load is quoted, it should be noted that we are stating that the Renold product conforms to the ISO minimum standard. Independent test results show that the minimum (many companies quote averages) breaking loads are far in excess of the ISO minimum. Where the quoted breaking load is not described as being the ISO minimum, the product has no relevant ISO standard. In this case, the breaking loads quoted are the minimum guaranteed. Triplex versions are available on request.
6
I Renold Syno Chain
Renold Syno Nickel Plated (BS) Attachments BS Standard M1 attachments (outer plates only) Chain Ref.
Technical Details (mm)
ISO No.
Pitch (inch)
Pitch (mm)
A
A
E
F
d
e
f
g
w
06B-1 08B-1 10B-1 12B-1 16B-1
0.375 0.500 0.625 0.750 1.000
9.525 12.700 15.875 19.050 25.400
1.290 1.810 2.040 2.420 3.760
1.040 1.550 1.550 1.810 3.060
3.500 4.500 5.500 6.800 6.800
14.500 20.800 24.900 28.200 39.700
10.100 13.000 16.500 21.000 23.000
4.000 5.800 6.800 8.100 10.000
8.000 11.000 14.000 18.000 24.000
(max)
BS Standard M2 attachments (outer plates only) Chain Ref. ISO No.
06B-1 08B-1 10B-1 12B-1 16B-1
Technical Details (mm) Pitch (inch)
Pitch (mm)
A
A
E
F
S
d
e
f
g
w
0.375 0.500 0.625 0.750 1.000
9.525 12.700 15.875 19.050 25.400
1.290 1.810 2.040 2.420 3.760
1.040 1.550 1.550 1.810 3.060
9.500 12.700 15.800 19.000 25.400
3.500 4.500 5.500 6.800 6.800
14.500 20.800 24.900 28.200 39.700
10.100 13.000 16.500 21.000 23.000
4.000 5.800 6.800 8.100 10.000
17.600 24.400 29.900 35.400 46.200
(max)
(max)
(max)
BS Standard K1 attachments (outer plates only) Chain Ref. ISO No.
06B-1 08B-1 10B-1 12B-1 16B-1
Technical Details (mm) Pitch (inch)
Pitch (mm)
A
A
E
F
T
U
d
g
h
w
0.375 0.500 0.625 0.750 1.000
9.525 12.700 15.875 19.050 25.400
1.290 1.810 2.040 2.420 3.760
1.040 1.550 1.550 1.810 3.060
19.600 25.900 32.700 39.800 50.800
28.600 42.000 49.900 54.400 85.600
3.500 4.500 5.500 6.800 6.800
4.000 5.800 6.800 8.100 10.000
6.700 8.900 10.300 13.500 15.900
8.000 11.000 14.000 18.000 24.000
BS Standard K2 attachments (outer plates only) Chain Ref. ISO No.
06B-1 08B-1 10B-1 12B-1 16B-1
Technical Details (mm) Pitch (inch)
Pitch (mm)
A
A
E
F
S
0.375 0.500 0.625 0.750 1.000
9.525 12.700 15.875 19.050 25.400
1.290 1.810 2.040 2.420 3.760
1.040 1.550 1.550 1.810 3.060
9.500 12.700 15.800 19.000 25.400
BS Standard Extended Bearing Pins - Type D Chain Ref. ISO No.
06B-1 08B-1 10B-1 12B-1 16B-1
Technical Details (mm) Pitch (inch)
Pitch (mm)
Pin Diameter
Extension Pin Length Max. Length Max.
A
A
B
V
H
0.375 0.500 0.625 0.750 1.000
9.525 12.700 15.875 19.050 25.400
3.280 4.450 5.080 5.720 8.270
11.300 14.800 17.600 20.700 33.300
23.000 30.900 36.200 43.100 66.800
(max)
(max)
T
U
d
g
h
w
19.600 25.900 32.700 39.800 50.800
28.600 42.000 49.900 54.400 85.600
3.500 4.500 5.500 6.800 6.800
4.000 5.800 6.800 8.100 10.000
6.700 8.900 10.300 13.500 15.900
17.600 24.400 29.900 35.400 46.200
Renold Syno Chain
Renold Syno Nickel Plated (ANSI) Attachments ANSI Standard M1 attachments (outer plates only) Chain Ref.
Technical Details (mm)
ANSI No.
Pitch (inch)
Pitch (mm)
A
A
E
F
d
e
f
g
w
40 50 60 80
0.500 0.625 0.750 1.000
12.700 15.875 19.050 25.400
1.810 2.420 3.230 4.060
1.550 2.040 2.450 3.060
3.500 5.500 5.500 6.800
17.500 24.600 26.000 39.700
12.700 15.900 18.300 24.600
5.500 7.150 8.600 10.250
9.500 12.700 15.900 24.000
(max)
ANSI Standard M2 attachments (outer plates only) Chain Ref. ANSI No.
40 50 60 80
Technical Details (mm) Pitch (inch)
Pitch (mm)
A
A
E
F
S
d
e
f
g
w
0.500 0.625 0.750 1.000
12.700 15.875 19.050 25.400
1.810 2.420 3.230 4.060
1.550 2.040 2.450 3.060
12.700 15.800 19.000 25.400
3.500 5.500 5.500 6.800
17.500 24.600 27.700 39.700
12.700 15.900 18.300 24.600
5.500 7.150 8.600 10.250
24.000 29.900 35.600 46.200
(max)
(max)
(max)
Renold Standard K1 attachments (outer plates only) Chain Ref. ANSI No.
40 50 60 80
Technical Details (mm) Pitch (inch)
Pitch (mm)
A
A
E
F
T
U
d
g
h
w
0.500 0.625 0.750 1.000
12.700 15.875 19.050 25.400
1.810 2.420 3.230 4.060
1.550 2.040 2.450 3.060
26.000 32.800 39.800 52.500
36.400 50.800 59.700 84.300
3.500 5.500 5.500 6.800
5.500 7.150 8.600 10.250
7.900 10.300 11.900 15.900
9.500 12.700 15.900 24.000
Renold Standard K2 attachments (outer plates only) Chain Ref. ANSI No.
40 50 60 80
Technical Details (mm) Pitch (inch)
Pitch (mm)
A
A
E
F
S
0.500 0.625 0.750 1.000
12.700 15.875 19.050 25.400
1.810 2.420 3.230 4.060
1.550 2.040 2.450 3.060
12.700 15.800 19.000 25.400
Renold Standard Extended Bearing Pins - Type D Chain Ref. ANSI No.
40 50 60 80
Technical Details (mm) Pitch (inch)
Pitch (mm)
Pin Diameter
Extension Pin Length Max. Length Max.
A
A
B
V
H
0.500 0.625 0.750 1.000
12.700 15.875 19.050 25.400
3.970 5.080 5.950 7.920
15.200 19.000 24.000 30.800
31.300 39.200 49.800 63.000
(max)
(max)
T
U
d
g
h
w
26.000 32.800 39.800 52.500
36.400 50.800 59.700 84.300
3.500 5.500 5.500 6.800
5.500 7.150 8.600 10.250
7.900 10.300 11.900 15.900
24.000 29.900 35.600 46.200
I7
8
I Renold Syno Chain
Renold Syno速 PC European (BS) Standard / ISO 606 / ANSI Standard
Chain Ref. Renold Chain No.
No.4
No. 26
No. 107
No. 12
No. 11/58
No. 30
Technical Details (mm) ISO Ref.
Pitch (inch)
Pitch (mm)
Connecting Links
Inside Width
Roller Diam.
Plate Height
Plate Width Inner
Plate Width Outer
Pin Diam.
Pin Length
Conn. Link Extension
Transverse Pitch
MIN
MAX
MAX
MAX
MAX
MAX
MAX
MAX
NOM
ISO606 Tensile Strength
Weight
(Newtons)
kg/m
No. 4
No. 107
No. 11
No. 26
No. 12
No. 30
-
-
MIN
European (BS) Standard - Simplex 1215359 1215360
06B-1 08B-1
A
A
B
C
D
E
F
G
H1
J
K
0.375 0.500
9.525 12.700
5.72 7.75
6.35 8.51
8.20 11.50
1.30 1.80
1.04 1.55
3.28 4.45
12.5 16.5
-
-
800 1600
0.22 0.38
ANSI sizes available on request
Renold Chain products that are dimensionally in line with the ISO standard far exceed the stated ISO minimum tensile strength requirements. However Renold does not consider breaking load to be a key indicator of performance because it ignores the principal factors of wear and fatigue. In these areas, Renold products are designed to produce the best possible results and independent testing proves this. In this catalogue, where the ISO breaking load is quoted, it should be noted that we are stating that the Renold product conforms to the ISO minimum standard. Independent test results show that the minimum (many companies quote averages) breaking loads are far in excess of the ISO minimum. Where the quoted breaking load is not described as being the ISO minimum, the product has no relevant ISO standard. In this case, the breaking loads quoted are the minimum guaranteed. Triplex versions are available on request.
I
Renold Syno Chain 9
Renold Syno速 Polymer Bush European (BS) Standard / ISO 606 / ANSI Standard
No. 107
No. 11/58
Chain Ref. Renold Chain No.
Technical Details (mm) ISO Ref.
Pitch (inch)
Pitch (mm)
Conn. Links
Inside Width
Roller Diam.
Plate Height
Plate Width Inner
Plate Width Outer
Pin Diam.
Pin Length
Conn. Link Extension
Transverse Pitch
MIN
MAX
MAX
MAX
MAX
MAX
MAX
MAX
NOM
ISO606 Tensile Strength
Weight
(Newtons)
kg/m
No. 107
No. 11
No. 58
MIN
European (BS) Standard - Simplex
28B1SP 32B1SP 40B1SP
28B-1 32B-1 40B-1
A
A
B
C
D
E
F
G
H1
J
K
1.75 2.00 2.25
44.45 50.80 63.50
30.99 30.99 39.30
27.94 29.21 39.37
37.08 42.29 52.96
7.62 7.11 8.13
6.35 6.35 8.13
12.71 14.29 19.85
64.2 63.4 78.2
6.8 8.0 9.5
-
200000 250000 355000
8.1 10.1 14.3
-
360000 450000 694000
15.9 17.1 27.1
-
125000 170000 223000 347000
5.2 6.8 8.9 14.6
250000 340000 446000 694000
10.3 13.9 17.6 28.9
-
European (BS) Standard - Duplex
28B2SP 32B2SP 40B2SP
28B-2 32B-2 40B-2
A
A
B
C
D
E
F
G
H2
J
K
1.75 2.00 2.25
44.45 50.80 63.50
30.99 30.99 39.30
27.94 29.21 39.37
37.08 42.29 52.96
7.62 7.11 8.13
6.35 6.35 8.13
12.71 14.29 19.85
123.7 122.0 150.5
6.8 8.0 9.5
59.56 58.55 72.29
ANSI Standard - Simplex
120A1SP 140A1SP 160A1SP 200A1SP
120-1 140-1 160-1 200-1
A
A
B
C
D
E
F
G
H1
J
K
1.50 1.75 2.00 2.50
38.10 44.45 50.80 63.50
25.50 25.73 31.55 38.00
22.23 25.40 28.58 39.67
36.20 42.23 48.26 60.33
4.80 5.61 6.35 8.13
4.80 5.61 6.35 8.13
11.11 12.71 14.29 19.85
49.3 52.9 63.1 76.9
5.3 5.2 6.5 9.0
-
A
A
B
C
D
E
F
G
H2
J
K
1.50 1.75 2.00 2.50
38.10 44.45 50.80 63.50
25.23 25.23 31.55 37.85
22.23 25.40 28.58 39.67
36.20 42.23 48.26 60.33
4.80 5.61 6.35 8.13
4.80 5.61 6.35 8.13
11.11 12.71 14.29 19.85
94.7 101.8 121.6 148.5
5.3 5.2 6.5 9.0
45.44 48.87 58.55 71.55
ANSI Standard - Duplex
120A2SP 140A2SP 160A2SP 200A2SP
120-2 140-2 160-2 200-2
Renold Chain products that are dimensionally in line with the ISO standard far exceed the stated ISO minimum tensile strength requirements. However Renold does not consider breaking load to be a key indicator of performance because it ignores the principal factors of wear and fatigue. In these areas, Renold products are designed to produce the best possible results and independent testing proves this. In this catalogue, where the ISO breaking load is quoted, it should be noted that we are stating that the Renold product conforms to the ISO minimum standard. Independent test results show that the minimum (many companies quote averages) breaking loads are far in excess of the ISO minimum. Where the quoted breaking load is not described as being the ISO minimum, the product has no relevant ISO standard. In this case, the breaking loads quoted are the minimum guaranteed.
10
I Renold Syno Chain
Renold Syno Double Pitch Chain Chain Ref. Renold Chain No.
Technical Details (mm) ISO Ref.
Pitch (inch)
Pitch (mm)
Connecting Links
Inside Width
Roller Diam.
Plate Height
Plate Width Inner
Plate Width Outer
Pin Diam.
Pin Length
Conn. Link Extension
Transverse Pitch
MIN
MAX
MAX
MAX
MAX
MAX
MAX
MAX
NOM
ISO606 Tensile Strength
Weight
(Newtons)
kg/m
No. 4
No. 107
No. 11
No. 26
No. 12
No. 30
3 3 3 3
3 3 3 3
3 3 3 3
3 3 3 –
3 3 3 3
3 3 3 3
MIN
Double Pitch Chain - Simplex 113440 113450 113460 113480
C2040 C2050 C2060 C2080
A
A
B
C
D
E
F
G
H1
J
K
1.000 1.250 1.500 2.000
25.400 31.750 38.100 50.800
7.850 9.400 12.570 15.750
7.920 10.160 11.910 15.880
11.800 15.000 17.800 22.600
1.550 2.040 3.230 4.050
1.550 2.040 3.230 4.050
3.970 5.080 5.950 7.930
16.400 20.400 28.600 35.800
1.900 2.500 2.500 3.100
-
Renold Syno ANSI Attachments
ANSI Double Pitch K1 attachments Chain Ref.
113040 113050 113560 113480
Technical Details (mm)
C2040 C2050 C2060 C2080
A
A
E
F
T
U
d
g
h
w
1.000 1.250 1.500 2.000
25.400 31.750 38.100 50.800
1.550 2.040 3.230 4.050
1.550 2.040 3.230 4.050
25.400 31.800 42.800 55.600
40.600 48.900 61.600 80.000
3.500 5.500 5.500 6.800
5.750 7.400 8.800 10.300
9.100 11.100 14.700 19.100
23.800 25.400 28.600 40.000
ANSI Double Pitch M1 attachments Chain Ref.
113040 113050 113560 113480
Technical Details (mm)
C2040 C2050 C2060 C2080
A
A
E
F
d
e
f
g
w
1.000 1.250 1.500 2.000
25.400 31.750 38.100 50.800
1.550 2.040 3.230 4.050
1.550 2.040 3.230 4.050
3.500 5.500 5.500 6.800
20.900 24.900 30.200 40.000
11.100 14.300 19.000 22.200
5.750 7.400 8.800 10.300
23.800 25.400 28.600 40.000
14100 22200 31800 56700
0.490 0.840 1.500 2.400
The best range of standard and solution products available anywhere ™
• High performance • Superior wear life • Outstanding fatigue resistance
Sovereign™ • Abrasion resistance chain • Ideal for dusty, gritty applications • Reduced pin wear • Extended life
Stainless Steel • Corrosion resistant • Maintenance free • Self-lubricating chain • Food industry-approved lubricant
• Designed for acidic/alkaline conditions • Ideal for wet environments • Food processing applications
Hydro-Service™ • Best premium chain
• Superior corrosion resistant coating
• Leading performance
• Alternative choice to stainless steel chain
• Solid bush / solid roller / end softened pin
• Will not chip or peel • Hexavalent chrome-free
Roll-Ring™ • All purpose chain • Affordable reliability • Wide waist plate / wedge rivet
• Revolutionary chain tensioner • Installed in seconds and self adjusting • Maintenance free • Also acts as noise damper
Smartlink™ • Economy chain • Dependable performance for a standard duty chain • Split bush / solid roller / wedge rivet
• Load monitoring technology • Technical reports & data logging
ERIKS vestigingen Aandrijftechniek
ERIKS Servicecenters
Dordrecht Keerweer 41 3316 KA Dordrecht T (078) 652 21 21 F (078) 652 21 29 E info.dordrecht@eriks.nl
Alkmaar Saffierstraat 3 1812 RM Alkmaar T (072) 514 17 17 F (072) 514 16 25 E esc.alkmaar@eriks.nl
Ede Galvanistraat 34 6716 AE Ede T (0318) 43 96 14 F (0318) 64 01 04 E ede@eriks.nl
Leeuwarden James Wattstraat 19 8912 AS Leeuwarden T (058) 215 05 87 F (058) 215 85 16 E leeuwarden@eriks.nl
Groningen Rouaanstraat 8 9723 CD Groningen T (050) 368 49 49 F (050) 314 62 57 E info.groningen@eriks.nl
Almelo Plesmanweg 12 7602 PE Almelo T (0546) 87 30 70 F (0546) 87 32 68 E almelo@eriks.nl
Eerbeek Loubergweg 19 6961 EJ Eerbeek T (0313) 67 95 00 F (0313) 65 47 68 E eerbeek@eriks.nl
Maastricht Amerikalaan 28 6199 AE Maastricht-Airport T (043) 604 91 80 F (043) 363 87 28 E maastricht@eriks.nl
Leeuwarden James Wattstraat 19 8912 AS Leeuwarden T (058) 294 50 50 F (058) 213 24 71 E info.leeuwarden@eriks.nl
Amsterdam Dynamostraat 46-48 1014 BK Amsterdam-Westpoort T (020) 448 96 10 F (020) 613 77 65 E amsterdam@eriks.nl
Eindhoven De Witbogt 22 a 5652 AG Eindhoven T (040) 291 19 00 F (040) 291 19 09 E eindhoven@eriks.nl
Rijnmond Shannonweg 33, Haven 5079 3197 LG Rotterdam-Botlek T (010) 231 34 00 F (010) 296 96 18 E rijnmond@eriks.nl
Roermond Albert Einsteinweg 8 6045 GX Roermond T (0475) 37 22 33 F (0475) 32 75 40 E info.roermond@eriks.nl
Arnhem Pieter Calandweg 46 6827 BK Arnhem T (026) 362 92 44 F (026) 361 00 63 E arnhem@eriks.nl
Emmen Willem Schoutenstraat 11 b 7825 VV Emmen T (0591) 66 80 00 F (0591) 66 80 06 E emmen@eriks.nl
Roermond Ada Byronweg 11 6045 GM Roermond T (0475) 37 22 70 F (0475) 37 23 05 E roermond@eriks.nl
Rotterdam Sevillaweg 75 3047 AL Rotterdam T (010) 245 50 00 F (010) 262 06 22 E info.rotterdam@eriks.nl
Bergen op Zoom Van Konijnenburgweg 44 b 4612 PL Bergen op Zoom T (0164) 27 55 44 F (0164) 27 55 49 E bergenopzoom@eriks.nl
Hengelo Hassinkweg 16 7556 BV Hengelo T (074) 291 57 57 F (074) 291 59 39 E hengelo@eriks.nl
Tilburg Ellen Pankhurststraat 9 5032 MD Tilburg T (013) 571 45 61 F (013) 570 06 42 E tilburg@eriks.nl
Schoonhoven Broeikweg 25 2871 RM Schoonhoven T (0182) 30 34 56 F (0182) 38 69 20 E info.schoonhoven@eriks.nl
Delfzijl Deltaweg 30 9936 HK Farmsum T (0596) 63 38 20 F (0596) 63 38 29 E delfzijl@eriks.nl
Hoorn De Factorij 35 d 1689 AK Zwaag T (0229) 21 28 82 F (0229) 21 93 74 E hoorn@eriks.nl
Zwolle Ampèrestraat 27 8013 PT Zwolle T (038) 467 29 20 F (038) 467 29 29 E zwolle@eriks.nl
Den Haag / Marofra Neckar 2 2491 BD Den Haag T (070) 381 84 84 F (070) 381 84 36 E denhaag@eriks.nl
Gouda Marconistraat 117 2809 PG Gouda T (0182) 33 11 60 F (0182) 37 82 02 E gouda@eriks.nl
Doetinchem Havenstraat 55 7005 AG Doetinchem T (0314) 34 37 20 F (0314) 34 37 41 E doetinchem@eriks.nl
Groningen Rouaanstraat 8 9723 CD Groningen T (050) 368 49 99 F (050) 368 49 98 E groningen@eriks.nl
www.eriks.nl