CATALOG LUBRICANT EN 2023 by Errecom SPA

LUBRICANT

2023

Refrigeration Lubricants

01 POE Lubricants

ERRECOM’s synthetic polyolester (POE) refrigeration lubricants are characterised by high thermal, chemical and hydrolytic stability. Due to their good miscibility, POE lubricants are compatible with all chlorine-free refrigerants, FC refrigerants, and with HFC refrigerants such as R134a, R404a, R507, R410a, R407c. ERRECOM’s POE lubricants can also be used with hydrocarbon refrigerants such as propane (R290) and propylene (R1270). Furthermore, their use has already been successfully tested with low-GWP refrigerants such as HFOs (e.g. R1234yf, R1234ze). Lastly, ERRECOM’s POEs have also been tested with new refrigerants designed to replace R22, such as R422a/D and R417a. Our POE lubricants are recommended for use in hermetic, semi-hermetic and open compressors as well as screw compressors and turbochargers (depending on viscosity). Due to their high viscosity indices, ERRECOM POEs have excellent cold flow properties and a highly stable lubricating film under high-temperature conditions in hydrocarbon applications. ERRECOM’s POE lubricants are characterised by high stability and excellent lubrication. POEs are hygroscopic, which means that they tend to absorb water more quickly than non-polar hydrocarbonbased refrigeration oils such as mineral ones, alkyl benzene and PAO. Precisely for this reason, all ERRECOM POEs are ultra-dry and filled in plastic bottles and metal tanks specially designed to ensure protection against moisture.

Physical Quantity Measured (Unit of Measurement)

Analytical Reference Method

POE 22

POE 32

POE 46

POE 55

POE 68

POE 100

POE 170

POE 220

100

170

220

ASTM-D445

53,9

100

170

226,2

Kinematic Viscosity @ 100°C (cSt)

ASTM-D445

4,23

5,5

7,3

8,2

9,5

11,51

16,66

19,34

Viscosity Index

ASTM-D2270

130

140

123

140

110

100

Pour Point (°C)

ASTM-D97

-48

-50

-45

-42

-36

-30

ISO VG

Kinematic Viscosity @ 40°C (cSt)

Flash Point (°C)

ASTM-D93

250

230

240

234

300

318

Density @ 15°C (g/cm³)

ASTM-D1298

0,95

0,955

0,965

0,975

0,968

0,96

0,975

Moisture Level (ppm)

ASTM-D6304

Total Acid (mg KOH/g)

ASTM-D974

<0,03

<0,04

Refrigeration Lubricants

POE 22 Art.-Nr.

Qty.

OL6011.Q.P2

250 mL

OL6011.M.P2

500 mL

OL6011.K.P2

OL6011.UP.P2

1 Gal

OL6011.I.P2

OL6011.P.P2

OL6011.K.01

€ -

OL6011.P.01

OL6011.UV

5 Gal

OL6011.V

20 L

OL6011.T

25 L

OL6011.B

200 L

OL6011.IBC

1000 L

POE 46 Art.-Nr.

Qty.

OL6015.Q.P2

250 mL

OL6015.M.P2

500 mL

OL6015.K.P2

OL6015.UP.P2

1 Gal

OL6015.I.P2

OL6015.P.P2

OL6015.K.01

€ -

OL6015.P.01

OL6015.UV

5 Gal

OL6015.V

20 L

OL6015.T

25 L

OL6015.B

200 L

OL6015.IBC

1000 L

POE 68 Art.-Nr.

Qty.

OL6016.Q.P2

250 mL

OL6016.M.P2

500 mL

OL6016.K.P2

OL6016.UP.P2

1 Gal

OL6016.I.P2

OL6016.P.P2

OL6016.K.01

€ -

OL6016.P.01

OL6016.UV

5 Gal

OL6016.V

20 L

OL6016.T

25 L

OL6016.B

200 L

OL6016.IBC

1000 L

POE 170 Art.-Nr.

Qty.

OL6020.Q.P2

250 mL

OL6020.M.P2

500 mL

OL6020.K.P2

OL6020.UP.P2

1 Gal

OL6020.I.P2

OL6020.P.P2

OL6020.K.01

€ -

OL6020.P.01

OL6020.UV

5 Gal

OL6020.V

20 L

OL6020.T

25 L

OL6020.B

200 L

OL6020.IBC

1000 L

POE 32 Packaging

Art.-Nr.

Qty.

€ -

Packaging

OL6012.Q.P2

250 mL

1080

OL6012.M.P2

500 mL

756

OL6012.K.P2

OL6012.UP.P2

1 Gal

196

OL6012.I.P2

140

OL6012.P.P2

672

OL6012.K.01

152

OL6012.P.01

OL6012.UV

5 Gal

OL6012.V

20 L

OL6012.T

25 L

OL6012.B

200 L

OL6012.IBC

1000 L

2592

972

1080

756

196

140

672

672 152

2592

972

756

196

Plastic Tank

Metal Tank

IBC Cube

POE 55 Packaging

2592

972

756

196

140

Art.-Nr.

Qty.

€ -

2592

972

1080

756

196

140

672

152

250 mL

1080

OL6055.M.P2

500 mL

756

OL6055.K.P2

OL6055.UP.P2

1 Gal

196

OL6055.I.P2

140

OL6055.P.P2

672

OL6055.K.01

152

OL6055.P.01

152

OL6055.UV

5 Gal

OL6055.V

20 L

Plastic Tank

Metal Tank

OL6055.T

25 L

OL6055.B

200 L

OL6055.IBC

1000 L

IBC Cube

POE 100 Packaging

Art.-Nr.

Qty.

€ -

2592

OL6017.Q.P2

250 mL

972

1080

OL6017.M.P2

500 mL

756

OL6017.K.P2

196

OL6017.UP.P2

1 Gal

196

OL6017.I.P2

140

OL6017.P.P2

672

OL6017.K.01

152

OL6017.P.01

OL6017.UV

5 Gal

OL6017.V

20 L

Plastic Tank

Metal Tank

OL6017.T

25 L

OL6017.B

200 L

OL6017.IBC

1000 L

IBC Cube

POE 220 Packaging

Art.-Nr.

Qty.

€ -

972

1080

756

196

140

672

152

2592

972

1080

756

196

140

672

672 152

OL6021.M.P2

500 mL

756

OL6021.K.P2

OL6021.UP.P2

1 Gal

196

OL6021.I.P2

140

OL6021.P.P2

672

OL6021.K.01

152

OL6021.P.01

152

OL6021.UV

5 Gal

OL6021.V

20 L

972

756

196

140

Plastic Tank

Metal Tank

OL6021.T

25 L

OL6021.B

200 L

OL6021.IBC

1000 L

IBC Cube

Metal Tank

IBC Cube

Plastic Tank

Metal Tank

IBC Cube

Packaging

1080

2592

Plastic Tank

2592 2592

250 mL

2592

IBC Cube

Packaging

OL6021.Q.P2

Metal Tank

Packaging

OL6055.Q.P2

Plastic Tank

Refrigeration Lubricants

Plastic Tank

Metal Tank

IBC Cube

Refrigeration Lubricants

CO2 - POE Lubricants

The Montreal Protocol bans CFCs and HCFCs aiming to protect the ozone layer while the Kyoto Protocol aims to reduce greenhouse gases and, thus, global warming. F-Gas Il, on the other hand, aims to progressively reduce the use of HFCs and high GWP (global warming potential) refrigerants. These laws encourage the use of R744 (CO2). Carbon dioxide (R744) has been used as a refrigerant since the last century with the introduction of industrial refrigeration systems. R744 has excellent thermodynamic properties and is an environmentally friendly refrigerant (with the lowest GWP and ODP). Its use has grown as it is not only a natural refrigerant but also extremely effective, both in specially designed industrial systems such as supermarket refrigerators and heat pump water heaters. Errecom's CO2 - POE lubricants are high-performance polyol ester-based synthetic lubricants specially developed for CO2 applications. CO2 - POEs are available in 5 different viscosity grades to meet the requirements of a full range of R744 systems. They are characterised by good miscibility, fluidity, and stability. Thanks to their branched molecular structure and the high-performance additive package included in the formulation, they also provide good lubrication with better overall performance than classic POEs over a wide temperature range. More precisely, Errecom's CO2 - POE lubricants contain excellent additive packages (anti-oxidants, anti-corrosives, anti-foaming) carefully selected to: ■ optimise miscibility with CO2, thus increasing heat exchange even in the low-temperature zone; ■ reduce the formation of foam, usually present at compressor start-up; ■ increase its lubricating capacity; ■ protect against materials, even under extreme operating conditions. They are also characterised by low toxicity and high biodegradability. CO2 - POEs can be used for both subcritical (e.g. low-temperature cooling stages in supermarket cascade refrigeration systems) and transcritical (e.g. medium-temperature cooling stages in supermarkets) applications. Physical Quantity Measured (Unit of Measurement)

Analytical Reference Method

CO2 - POE 32

CO2 - POE 55

CO2 - POE 68

CO2 - POE 85

CO2 - POE 100

100

Kinematic Viscosity @ 40°C (cSt)

ASTM-D445

68,3

100

Kinematic Viscosity @ 100°C (cSt)

ASTM-D445

8,8

9,5

11,5

Viscosity Index

ASTM-D2270

150

142

122

119

112

ISO VG

Pour Point (°C)

ASTM-D97

-51

-49

-42

-39

Flash Point (°C)

ASTM-D93

270

280

270

272

Density @ 15°C (g/cm³)

ASTM-D1298

0,983

0,982

0,987

0,991

0,986

Moisture Level (ppm)

ASTM-D6304

Total Acid (mg KOH/g)

ASTM-D974

<0,04

<0,03

<0,02

<0,03

CO2 - PAG Lubricants

Carbon dioxide (R744) is the natural refrigerant identified as the future ozone-friendly technology. In the last years, the sector has recorded impressive technological development in CO2-based systems for commercial and industrial applications, especially as far as it concerns CO2 refrigeration and heat pumps. CO2 – PAG lubricants are composed of innovative double-end-capped polyalkylene glycols specially designed to operate under high pressure and high-temperature conditions typical of CO2. They provide highly efficient lubrication for CO2 compressors and optimised miscibility with the refrigerant to ensure wear protection even at the highest levels of CO2 dilution, where alternative lubricants such as PAO or ABZ can reveal hydrodynamic lubrication loss. Errecom’s CO2 - PAGs are OEM-approved for commercial and industrial refrigeration systems working with CO2 and are available in different viscosities (between ISO 46-100). CO2 – PAGs are characterised by: ■ double-end-capped technology with optimised miscibility with CO2: it maximises the oil return to the compressor to ensure full system efficiency, without loss of hydrodynamic or lubrication properties; ■ excellent lubricating properties even under extreme pressure and high-temperature conditions; ■ high-performance additives: they ensure excellent thermal, chemical and hydrolytic stability, and reduce downtime and maintenance costs; ■ low hygroscopicity: it ensures lower water absorption than alternative R744 technologies (POE, PAO, Alkylbenzenes); ■ compatibility with metal and plastic components: it ensures optimised system’s stability and durability; ■ high viscosity index and low pour point: they guarantee the full efficiency of the system and excellent lubricating properties even under extreme pressure.

Physical Quantity Measured (Unit of Measurement)

Analytical Reference Method

CO2 - PAG 46

CO2 - PAG 68

CO2 - PAG 100

ASTM-D445

49,7

107,3

Kinematic Viscosity @ 100°C (cSt)

ASTM-D445

10,7

Viscosity Index

ASTM-D2270

213

210

216

ISO VG Kinematic Viscosity @ 40°C (cSt)

100

Pour Point (°C)

ASTM-D97

-49

-46

-43

Flash Point (°C)

ASTM-D93

> 200

Density @ 15°C (g/cm³)

ASTM-D1298

0,998

0,999

Moisture Level (ppm)

ASTM-D6304

300

500

Total Acid (mg KOH/g)

ASTM-D974

0,02

0,1

Refrigeration Lubricants

CO2 - POE 32 Art.-Nr.

Qty.

€

OL6079.Q.P2

250 mL

OL6079.M.P2

500 mL

OL6079.K.P2

OL6079.UP.P2

1 Gal

Packaging

CO2 - POE 55 Art.-Nr.

Qty.

€

2592

OL6062.Q.P2

250 mL

972

1080

OL6062.M.P2

500 mL

756

OL6062.K.P2

196

OL6062.UP.P2

1 Gal

Plastic Tank

Packaging

2592

972

1080

756

196

196 196

OL6079.I.P2

196

OL6062.I.P2

196

OL6079.P.P2

140

OL6062.P.P2

140

OL6079.K.01

672

OL6062.K.01

672

672 152

OL6079.P.01

152

OL6062.P.01

152

OL6079.UV

5 Gal

OL6062.UV

5 Gal

OL6079.V

20 L

OL6062.V

20 L

Metal Tank

OL6079.T

25 L

OL6062.T

25 L

OL6079.B

200 L

OL6062.B

200 L

OL6079.IBC

1000 L

OL6062.IBC

1000 L

2592

CO2 - POE 68 Art.-Nr.

Qty.

OL6083.Q.P2

250 mL

€ -

IBC Cube

Packaging

CO2 - POE 85 Art.-Nr.

Qty.

2592

OL6063.Q.P2

250 mL

€ -

OL6083.M.P2

500 mL

972

1080

OL6063.M.P2

500 mL

972

1080

756

OL6063.K.P2

756

OL6083.UP.P2

1 Gal

196

OL6063.UP.P2

1 Gal

196

OL6083.I.P2

196

OL6063.I.P2

196

OL6083.P.P2

140

OL6063.P.P2

140

OL6083.K.01

672

OL6063.K.01

672

672 152

OL6083.P.01

152

OL6063.P.01

152

OL6083.UV

5 Gal

OL6063.UV

5 Gal

OL6083.V

20 L

OL6063.V

20 L

OL6083.T

25 L

OL6063.T

25 L

OL6083.B

200 L

OL6063.B

200 L

OL6083.IBC

1000 L

OL6063.IBC

1000 L

2592

CO2 - POE 46 Art.-Nr.

Qty.

OL6036.Q.P2

250 mL

€ -

Metal Tank

IBC Cube

Packaging

CO2 - POE 100 Art.-Nr.

Qty.

2592

OL6084.Q.P2

250 mL

€

OL6036.M.P2

500 mL

972

1080

OL6084.M.P2

500 mL

972

1080

756

OL6084.K.P2

756

OL6036.UP.P2

1 Gal

196

OL6084.UP.P2

1 Gal

196

OL6036.I.P2

196

OL6084.I.P2

196

OL6036.P.P2

140

OL6084.P.P2

140

OL6036.K.01

672

OL6084.K.01

672

672 152

OL6036.P.01

152

OL6084.P.01

152

OL6036.UV

5 Gal

OL6084.UV

5 Gal

OL6036.V

20 L

OL6084.V

20 L

OL6036.T

25 L

OL6084.T

25 L

OL6036.B

200 L

OL6084.B

200 L

OL6036.IBC

1000 L

OL6084.IBC

1000 L

2592

CO2 - PAG 68 Art.-Nr.

Qty.

€

OL6037.Q.P2

250 mL

OL6037.M.P2

500 mL

OL6037.K.P2

OL6037.UP.P2

1 Gal

OL6037.I.P2

OL6037.P.P2

OL6037.K.01

Metal Tank

IBC Cube

Packaging

CO2 - PAG 100 Art.-Nr.

Qty.

€

2592

OL6078.Q.P2

250 mL

972

1080

OL6078.M.P2

500 mL

972

1080

756

OL6078.K.P2

756

196

OL6078.UP.P2

1 Gal

196

OL6078.I.P2

196

140

OL6078.P.P2

140

672

OL6078.K.01

672

672 152

OL6037.P.01

152

OL6078.P.01

152

OL6037.UV

5 Gal

OL6078.UV

5 Gal

OL6037.V

20 L

OL6078.V

20 L

OL6037.T

25 L

OL6078.T

25 L

OL6037.B

200 L

OL6078.B

200 L

OL6037.IBC

1000 L

OL6078.IBC

1000 L

Metal Tank

IBC Cube

Plastic Tank

Metal Tank

IBC Cube

Plastic Tank

Metal Tank

IBC Cube

Packaging

2592

Plastic Tank

IBC Cube

Packaging

OL6036.K.P2

Plastic Tank

Metal Tank

Packaging

OL6083.K.P2

Plastic Tank

Refrigeration Lubricants

Plastic Tank

Metal Tank

IBC Cube

Refrigeration Lubricants

HC - PAG Lubricants HC - PAG lubricants are blends of polyalkylene glycols chosen among the best-performing and most innovative organic molecules on the market. In addition to the double-end-capped technology, they are characterised by excellent additive packages. The additives contained in HC - PAGs, regardless of their viscosity, make it possible to: ■ increase lubricity ■ improve chemical stability ■ reduce hygroscopicity ■ increase the anti-wear and anti-corrosion protection ■ ensure high solubility and miscibility. Over time, PAG lubricants, which have originally been developed for automotive applications, have also proved excellent for use with natural refrigerants, such as propane and butane. HC - PAGs are characterised by: ■ insoluble base in water: ensures high lubrication performance in HVAC/R compressors; ■ high viscosity index: ensures excellent lubrication, low wear and excellent performance at extreme pressures; ■ specific additives for HVAC/R applications: provides excellent thermal conductivity and protection against oxidation and corrosion; ■ high flash point for safe use even at high temperatures; ■ double-end-capped technology: ensures low hygroscopicity, high chemical and thermal stability and optimised miscibility with refrigerant gases; ■ biodegradable and safe for humans and the environment.

Physical Quantity Measured (Unit of Measurement)

Analytical Reference Method

HC - PAG 68

HC - PAG 100

HC - PAG 150

100

150

Kinematic Viscosity @ 40°C (cSt)

ASTM-D445

100

150

ASTM-D445

12,4

18,5

Viscosity Index

ASTM-D2270

181

202

200

ASTM-D97

-40

-45

-40

Flash Point (°C)

ASTM-D93

215

228

230 1,005

ISO VG

Kinematic Viscosity @ 100°C (cSt) Pour Point (°C)

Density @ 15°C (g/cm³) Moisture Level (ppm)

Total Acid (mg KOH/g)

HC - PAG 68 Art.-Nr.

Qty.

OL6069.Q.P2

250 mL

OL6069.M.P2

500 mL

OL6069.K.P2

OL6069.UP.P2

1 Gal

OL6069.I.P2

OL6069.P.P2

OL6069.K.01

€ -

OL6069.P.01

OL6069.UV

5 Gal

OL6069.V

20 L

OL6069.T

25 L

OL6069.B

200 L

OL6069.IBC

1000 L

Art.-Nr.

Qty.

250 mL

OL6077.M.P2

500 mL

OL6077.K.P2

OL6077.UP.P2

1 Gal

OL6077.I.P2

OL6077.P.P2

OL6077.K.01

€ -

OL6077.P.01

OL6077.UV

5 Gal

OL6077.V

20 L

OL6077.T

25 L

OL6077.B

200 L

OL6077.IBC

1000 L

0,999

0,994

300

ASTM-D974

0,05

HC - PAG 100 Packaging

2592

972

756

196

140

Art.-Nr.

Qty.

€ -

OL6089.Q.P2

250 mL

1080

OL6089.M.P2

500 mL

756

OL6089.K.P2

OL6089.UP.P2

1 Gal

196

OL6089.I.P2

140

OL6089.P.P2

672

OL6089.K.01

152

OL6089.P.01

OL6089.UV

5 Gal

OL6089.V

20 L

Plastic Tank

Metal Tank

OL6089.T

25 L

OL6089.B

200 L

OL6089.IBC

1000 L

2592

972

1080

756

196

140

672

152

IBC Cube

HC - PAG 150 OL6077.Q.P2

ASTM-D1298 ASTM-D6304

Packaging

Refrigeration Lubricants

Plastic Tank

Metal Tank

IBC Cube

Packaging

2592

972

1080

756

196

140

672

152

Plastic Tank

Metal Tank

IBC Cube

Refrigeration Lubricants

NH3 - PAG Lubricants To address climate problems associated with ozone depletion and global warming, alternative refrigerant gases have emerged in the HVAC/R sector, including low-GWP HFCs such as R1234yf and halogen-free refrigerant gases, including NH3 (R717), propane (R290), isobutane (R600a) and carbon dioxide (R744). Errecom’s NH3 – PAG lubricants, which have been specially formulated to be used with NH3, are based on the ‘capped PAG’ technology. This technology is characterized by chemically inactive groups at both ends of the molecule, unlike typical polyalkylene glycols generally consisting of polymer chains with a terminal hydroxyl group (chemically active end). Therefore, NH3 – PAG lubricants provide excellent lubrication for compression refrigeration systems and better lubrication properties for ammonia refrigeration systems. NH3 – PAG lubricants offer the following pros: good miscibility with NH3 over a wide range of lubricant concentrations and temperatures; ■ low hygroscopicity compared to the inclination of uncapped PAG to absorb water; ■ high chemical, thermal and hydrolytic stability; ■ excellent lubrication power. ■

Physical Quantity Measured (Unit of Measurement)

Analytical Reference Method

HC - PAG 68

HC - PAG 100

HC - PAG 150

100

Kinematic Viscosity @ 40°C (cSt)

ASTM-D445

49,7

107,3

ASTM-D445

10,7

Viscosity Index

ASTM-D2270

213

216

ASTM-D97

-45

Flash Point (°C)

ASTM-D93

226

>200 0,999

ISO VG

Kinematic Viscosity @ 100°C (cSt) Pour Point (°C)

Density @ 15°C (g/cm³) Moisture Level (ppm)

Total Acid (mg KOH/g)

ASTM-D1298

0,998

ASTM-D6304

300

ASTM-D974

<0,1

NH3 - PAG 46 Art.-Nr.

Qty.

€

OL6092.Q.P2

250 mL

OL6092.M.P2

500 mL

OL6092.K.P2

OL6092.UP.P2

1 Gal

OL6092.I.P2

OL6092.P.P2

OL6092.K.01

Packaging

2592

972

1080

756

196

140

672

OL6092.P.01

152

OL6092.UV

5 Gal

OL6092.V

20 L

OL6092.T

25 L

OL6092.B

200 L

OL6092.IBC

1000 L

2592

NH3 - PAG 100 Art.-Nr.

Qty.

€

Plastic Tank

Metal Tank

IBC Cube

Packaging

OL6093.Q.P2

250 mL

OL6093.M.P2

500 mL

972

1080

OL6093.K.P2

756

OL6093.UP.P2

1 Gal

196

OL6093.I.P2

196

OL6093.P.P2

140

OL6093.K.01

672

OL6093.P.01

152

OL6093.UV

5 Gal

OL6093.V

20 L

OL6093.T

25 L

OL6093.B

200 L

OL6093.IBC

1000 L

Plastic Tank

Metal Tank

IBC Cube

Refrigeration Lubricants

240 mL Lubricant Cartridges

EASY GUN

PAG

EasyGun is Errecom’s tool for inserting 240 mL cartridges of additives, UV leak detector dyes, and lubricants in AC/R systems. Art.-Nr.

Description

IN1032.01

EasyGun

TB5203.01

1/4 SAE Adapter

TB5204.01

5/16 SAE Adapter

€

Art.-Nr.

Description

€

OL6069.DQ.01

HC - PAG 68

2394 2394

OL6089.DQ.01

HC - PAG 100

2394 2394

OL6077.DQ.01

HC - PAG 150

2394 2394

OL6036.DQ.01

CO2 - PAG 46

2394 2394

OL6037.DQ.01

CO2 - PAG 68

2394 2394

2394

OL6078.DQ.01

CO2 - PAG 100

2394 2394

2394

POE

MINERAL OIL

Art.-Nr.

Description

OL6011.DQ.01

POE 22

OL6012.DQ.01

€

Art.-Nr.

Description

€

2394 2394

OL6064.DQ.01

MINERAL 32/3

2394 2394

POE 32

2394 2394

OL6065.DQ.01

MINERAL 46

2394 2394

OL6015.DQ.01

POE 46

2394 2394

OL6066.DQ.01

MINERAL 55/4

2394 2394

OL6055.DQ.01

POE 55

2394 2394

OL6067.DQ.01

MINERAL 68

2394 2394

OL6016.DQ.01

POE 68

2394 2394

OL6068.DQ.01

MINERAL 100/5

2394 2394

OL6017.DQ.01

POE 100

2394 2394

OL6020.DQ.01

POE 170

2394 2394

OL6021.DQ.01

POE 220

2394 2394

OL6062.DQ.01

CO2 - POE 55

2394 2394

OL6063.DQ.01

CO2 - POE 85

Refrigeration Lubricants

Mineral Oil Physical Quantity Measured (Unit of Measurement)

Analytical Reference Method

MINERAL 32/3

MINERAL 46

MINERAL 55/4

MINERAL 68

MINERAL 100/5

100

Kinematic Viscosity @ 40°C (cSt)

ASTM-D445

Kinematic Viscosity @ 100°C (cSt)

ASTM-D445

4,6

5,4

6,2

6,6

8,8

Viscosity Index

ASTM-D2270

Pour Point (°C)

ASTM-D97

-45

-36

-32

-30

ISO VG

Flash Point (°C)

ASTM-D93

190

194

198

200

220

Density @ 15°C (g/cm³)

ASTM-D1298

0,904

0,91

0,915

0,905

Moisture Level (ppm)

ASTM-D6304

Total Acid (mg KOH/g)

ASTM-D974

0,02

Colour (APHA)

ASTM-D1500

0,5

< 1,0

1,0

< 1,0

ERRECOM’s mineral oils are highly refined hydrotreated naphthenic bases enhanced by additives that ensure: ■ high ageing stability, ■ low pour point, ■ excellent low-temperature behaviour, ■ good compatibility with ammonia (NH3), HCFCs (e.g. R22), hydrocarbons (e.g. propane R290, propylene R1270). The high solvent power and excellent low-temperature properties lead to good floc points for the refrigerant-oil mixture. As it is wax-free, ERRECOM’s mineral oil has a low pour point and good cold pour properties. At high temperatures, ERRECOM’s mineral oil has a higher flash point than other products on the market and high thermal and chemical stability. It does not corrode iron, copper, and aluminium.

MINERAL 55/4 Art.-Nr.

Qty.

OL6066.Q.P2

250 mL

€ -

MINERAL 32/3 Art.-Nr.

Qty.

OL6064.Q.P2

250 mL

2592

Packaging

2592

OL6064.M.P2

500 mL

972

1080

OL6064.K.P2

756

OL6064.UP.P2

1 Gal

196

OL6064.I.P2

196

OL6064.P.P2

140

OL6064.K.01

672

672 152

OL6064.P.01

152

OL6064.UV

5 Gal

OL6064.V

20 L

OL6064.T

25 L

OL6064.B

200 L

OL6064.IBC

1000 L

2592

MINERAL 46 Packaging

€

Art.-Nr.

Qty.

OL6065.Q.P2

250 mL

€ -

OL6066.M.P2

500 mL

972

1080

OL6065.M.P2

500 mL

972

1080

756

OL6065.K.P2

756

OL6066.UP.P2

1 Gal

196

OL6065.UP.P2

1 Gal

196

OL6066.I.P2

196

OL6065.I.P2

196

OL6066.P.P2

140

OL6065.P.P2

140

OL6066.K.01

672

OL6065.K.01

672

672 152

OL6066.P.01

152

OL6065.P.01

152

OL6066.UV

5 Gal

OL6065.UV

5 Gal

OL6066.V

20 L

OL6065.V

20 L

OL6066.T

25 L

OL6065.T

25 L

OL6066.B

200 L

OL6065.B

200 L

OL6066.IBC

1000 L

OL6065.IBC

1000 L

2592

972

1080

756

196

140

672

152

MINERAL 68 Art.-Nr.

Qty.

OL6067.Q.P2

250 mL

€ -

Metal Tank

IBC Cube

Metal Tank

IBC Cube

Packaging

OL6066.K.P2

Plastic Tank

Metal Tank

IBC Cube

MINERAL 100/5 Packaging

2592

Art.-Nr.

Qty.

OL6068.Q.P2

250 mL

OL6067.M.P2

500 mL

972

1080

OL6068.M.P2

500 mL

OL6067.K.P2

756

OL6068.K.P2

OL6067.UP.P2

1 Gal

196

OL6068.UP.P2

1 Gal

OL6067.I.P2

196

OL6068.I.P2

OL6067.P.P2

140

OL6068.P.P2

OL6067.K.01

672

OL6068.K.01

Plastic Tank

€ -

OL6067.P.01

152

OL6068.P.01

OL6067.UV

5 Gal

OL6068.UV

5 Gal

OL6067.V

20 L

OL6068.V

20 L

OL6067.T

25 L

OL6068.T

25 L

OL6067.B

200 L

OL6068.B

200 L

OL6067.IBC

1000 L

OL6068.IBC

1000 L

Metal Tank

IBC Cube

Packaging

Refrigeration Lubricants

Plastic Tank

Metal Tank

IBC Cube

Refrigeration Lubricants

Vacuum Pump Oils ERRECOM’s Vacuum Pump Oils are blends of carefully selected mineral oils with low vapour pressure and a tight distillation range to ensure the best performance in terms of lubrication of vacuum pumps, including rotary vane pumps. The main features of Errecom’s mineral oils are: ■ High thermal stability: it can be used in closed systems

operating even at high temperatures and high pressures avoiding the growth of deposits and sludge;

■ high oxidation stability: it extends the charge in operation,

thus preventing the viscosity of the product from increasing too early;

■ high hydrolytic stability: it protects the oil from

decomposition, even in the presence of small percentages of water;

■ good demulsibilty: it quickly separates oil from the water that may

Physical Quantity Measured (Unit of Measurement)

Analytical Reference Method

to previous lubricants): it avoids clogging of the filters and extends filter replacement intervals;

■ anti-corrosion and anti-rust power: it protects all metal ■ components of the system; ■ anti-foam properties: avoids the formation/presence of foam

and therefore of air that would reduce the system’s efficiency due to the compressibility different from that of oil.

ISO 32

ISO 46

HIGH VISCOSITY ISO 46 HD

ISO 68

ASTM-D445

32,2

46,4

67,9

46,8

ISO VG Kinematic Viscosity @ 40°C (cSt)

have entered the system, further inhibiting the oxidation process; ■ higher filterability even in the presence of water (compared

Kinematic Viscosity @ 100°C (cSt)

ASTM-D445

5,5

7,2

8,8

7,6

Viscosity Index

ASTM-D2270

105

103

102

133

Pour Point (°C)

ASTM-D97

-31

-26

-25

-16

Flash Point (°C)

ASTM-D93

210

215

220

225

Density @ 15°C (g/cm³)

ASTM-D1298

0,870

0,872

0,877

0,845

ISO 32 Art.-Nr.

ISO 46 Qty.

OL6053.Q.P2

250 mL

€ -

OL6053.M.P2

500 mL

OL6053.K.P2

OL6053.UP.P2

1 Gal

OL6053.I.P2

OL6053.P.P2

OL6053.UV

5 Gal

OL6053.V

20 L

OL6053.T

25 L

OL6053.B

200 L

OL6053.IBC

1000 L

Packaging

2592

972

756

196

140

€ -

250 mL

1080

OL6054.M.P2

500 mL

756

OL6054.K.P2

OL6054.UP.P2

1 Gal

196

OL6054.I.P2

140

OL6054.P.P2

OL6054.UV

5 Gal

OL6054.V

20 L

OL6054.T

25 L

Plastic Tank

Metal Tank IBC Cube

OL6054.B

200 L

OL6054.IBC

1000 L

Packaging

2592

972

1080

756

196

140

Plastic Tank

Metal Tank IBC Cube

ISO 46 HD HIGH VISCOSITY INDEX Qty.

OL1008.Q.P2

250 mL

€ -

OL1008.M.P2

500 mL

OL1008.K.P2

OL1008.UP.P2

1 Gal

OL1008.I.P2

OL1008.P.P2

OL1008.UV

5 Gal

OL1008.V

20 L

OL1008.T

25 L

OL1008.B

200 L

OL1008.IBC

1000 L

Qty.

OL6054.Q.P2

ISO 68 Art.-Nr.

Art.-Nr.

Packaging

2592

972

756

196

140

Art.-Nr.

Qty.

€ -

OL1010.Q.P2

250 mL

1080

OL1010.M.P2

500 mL

756

OL1010.K.P2

OL1010.UP.P2

1 Gal

196

OL1010.I.P2

140

OL1010.P.P2

OL1010.UV

5 Gal

OL1010.V

20 L

OL1010.T

25 L

Refrigeration Lubricants

Plastic Tank

Metal Tank IBC Cube

OL1010.B

200 L

OL1010.IBC

1000 L

Packaging

2592

972

1080

756

196

140

Plastic Tank

Metal Tank IBC Cube

Refrigeration Lubricants

Oil Charging Pumps ■ Fits the size of each container.

■ Can be used with 10-20-25 L containers.

■ Capacity per shot: 50 mL.

■ Compatible with all types of refrigerant gases.

■ 1/4’’ SAE Male thread.

■ Capacity per shot: 75 mL.

■ Maximum output pressure: 10 bar (145 psi).

■ 3/8’’ or 1/4’’ SAE Male thread (reduction included).

■ Length of closed pump: 41 cm.

■ Maximum output pressure: 17 bar (250 psi).

■ Hose length supplied: 150 cm 1/4 SAE x 1/4 SAE.

■ Hose length: 150 cm 1/4 SAE x 1/4 SAE.

Art.-Nr.

PM1012.01

€ -

Art.-Nr.

PM1013.01

POE

€ -

PAG Id

Test for checking the Type of Refrigeration Lubricant inside an AC/R System ■ Recommended when performing maintenance on AC/R systems whose refrigeration

lubricant is unknown.

■ Works with all POE and PAG lubricants. ■ Easy to use. ■ Quick and accurate results in a few seconds:

- clear-looking mixture indicates PAG; - murky-looking mixture indicates POE.

■ Contains 4 tests.

Art.-Nr.

RK1411.S1

€

2160

Oil Test

Test for checking the Type of Refrigeration Lubricant inside an AC/R System ■ Recommended when performing maintenance on AC/R systems whose

refrigeration lubricant is unknown.

■ Works with all POE, ABZ and mineral oils. ■ Saves time and money by avoiding laboratory tests or the use of a refractometer. ■ Avoids making the common and expensive mistake of mixing POE lubricant with

mineral oils.

■ Provides reliable results in just a few seconds. ■ Compatible with all types of refrigerant gases. ■ Contains 2 tests.

Art.-Nr.

RK1055.S1

€

2160

Refrigeration Lubricants

A/C Compressor Lubricants

PREMIUM PAG Lubricants

R134a - R1234yf even for ELECTRIC VEHICLE

PREMIUM PAGs are synthetic lubricants based on polyalkylene glycols, specially designed for vehicle A/C systems working with R12, R134a and R1234yf. Thanks to the quality of their double-end-capped formula and the high-performance additives specially designed for automotive applications, Premium PAG lubricants set the standard in compressor lubrication of every A/C system. Errecom’s PREMIUM PAGs are characterized by: ■ ■ ■ ■ ■

double-end-capped technology: it guarantees excellent chemical and thermal stability;

excellent lubricating properties even under extreme pressure and high-temperature conditions;

optimised miscibility with R12, R134a, and R1234yf: it guarantees the proper oil return to the compressor, ensuring maximum system efficiency; low hygroscopicity: it ensures lower water absorption than standard PAGs; high viscosity index, low pour point and excellent long-term lubrication.

Physical Quantity Measured (Unit of Measurement)

Analytical Reference Method

PREMIUM PAG

PREMIUM PAG 46

PREMIUM PAG 100

PREMIUM PAG 125

PREMIUM PAG 150

ASTM-D445

100

125

150

ASTM-D445

12,4

8,6

ASTM-D2270

181

184

225

199

200

ISO VG

Kinematic Viscosity @ 40°C (cSt) Kinematic Viscosity @ 100°C (cSt) Viscosity Index Pour Point (°C) Flash Point (°C) Density @ 15°C (g/cm³) Moisture Level (ppm) Total Acid (mg KOH/g)

Qty.

OL6057.Q.P2

250 mL

OL6057.M.P2

500 mL

OL6057.K.P2

OL6057.UP.P2

1 Gal

OL6057.I.P2

OL6057.P.P2

OL6057.K.01

OL6057.P.01

OL6057.UV

5 Gal

OL6057.V

20 L

OL6057.T

25 L

OL6057.B

200 L

OL6057.IBC

1000 L

€ -

100

125

150

ASTM-D97

-40

-43

-40

-42

-40

ASTM-D93

215

226

230

215

230 1,005

ASTM-D1298

0,999

0,993

ASTM-D6304

300

ASTM-D974

0,05

PREMIUM PAG Art.-Nr.

PREMIUM PAG + UV DYE 24

2592 2592

Packaging

Art.-Nr.

Qty.

OL6058.Q.P2

250 mL

972

1080

OL6058.M.P2

500 mL

756

OL6058.K.P2

196

OL6058.UP.P2

1 Gal

196

OL6058.I.P2

140

OL6058.P.P2

672

OL6058.K.01

152

OL6058.P.01

OL6058.UV

5 Gal

OL6058.V

20 L

Plastic Tank

Metal Tank

OL6058.T

25 L

OL6058.B

200 L

OL6058.IBC

1000 L

A/C Compressor Lubricants

IBC Cube

€ -

2592 2592

972

1080

756

196

140

672

152

Packaging

Plastic Tank

Metal Tank

IBC Cube

A/C Compressor Lubricants

PREMIUM PAG 46 Art.-Nr.

Qty.

OL6001.Q.P2

250 mL

OL6001.M.P2

500 mL

OL6001.K.P2

OL6001.UP.P2

1 Gal

OL6001.I.P2

OL6001.P.P2

OL6001.K.01

OL6001.P.01

OL6001.UV

5 Gal

OL6001.V

20 L

OL6001.T

25 L

OL6001.B

200 L

OL6001.IBC

1000 L

€ -

PREMIUM PAG 46 + UV DYE 2592 2592

Packaging

OL6003.Q.P2

Qty.

250 mL

OL6003.M.P2 500 mL OL6003.K.P2

OL6003.UP.P2

1 Gal

OL6003.I.P2

OL6003.P.P2

OL6003.K.01

OL6003.P.01

OL6003.UV

5 Gal

OL6003.V

20 L

OL6003.T

25 L

OL6003.B

200 L

OL6003.IBC

1000 L

€ -

972

1080

OL6006.M.P2 500 mL

756

OL6006.K.P2

196

OL6006.UP.P2

1 Gal

196

OL6006.I.P2

140

OL6006.P.P2

672

OL6006.K.01

152

OL6006.P.01

OL6006.UV

5 Gal

OL6006.V

20 L

Plastic Tank

Metal Tank

OL6006.T

25 L

OL6006.B

200 L

OL6006.IBC

1000 L

IBC Cube

2592 2592

Packaging

OL6004.Q.P2

Qty.

250 mL

OL6004.M.P2 500 mL OL6004.K.P2

OL6004.UP.P2

1 Gal

OL6004.I.P2

OL6004.P.P2

OL6004.K.01

OL6004.P.01

OL6004.UV

5 Gal

OL6004.V

20 L

OL6004.T

25 L

OL6004.B

200 L

OL6004.IBC

1000 L

€ -

OL6005.Q.P2

Qty.

250 mL

OL6005.M.P2 500 mL OL6005.K.P2

OL6005.UP.P2

1 Gal

OL6005.I.P2

OL6005.P.P2

OL6005.K.01

OL6005.P.01

OL6005.UV

5 Gal

OL6005.V

20 L

OL6005.T

25 L

OL6005.B

200 L

OL6005.IBC

1000 L

€ -

Qty.

250 mL

972

1080

OL6008.M.P2 500 mL

756

OL6008.K.P2

196

OL6008.UP.P2

1 Gal

196

OL6008.I.P2

140

OL6008.P.P2

672

OL6008.K.01

152

OL6008.P.01

OL6008.UV

5 Gal

OL6008.V

20 L

Metal Tank

OL6008.T

25 L

OL6008.B

200 L

OL6008.IBC

1000 L

IBC Cube

2592 2592

Art.-Nr.

OL6045.Q.P2

Qty.

250 mL

972

1080

OL6045.M.P2 500 mL

756

OL6045.K.P2

196

OL6045.UP.P2

1 Gal

196

OL6045.I.P2

140

OL6045.P.P2

672

OL6045.K.01

152

OL6045.P.01

OL6045.UV

5 Gal

OL6045.V

20 L

Plastic Tank

Metal Tank

OL6045.T

25 L

OL6045.B

200 L

OL6045.IBC

1000 L

2592 2592

972

1080

756

196

140

672

152

Packaging

Plastic Tank

Metal Tank

IBC Cube

€ -

2592 2592

972

1080

756

196

140

672

152

Packaging

Plastic Tank

Metal Tank

IBC Cube

PREMIUM PAG 125 + UV DYE Packaging

IBC Cube

PREMIUM PAG 150 Art.-Nr.

Art.-Nr.

OL6008.Q.P2

Plastic Tank

€

PREMIUM PAG 100 + UV DYE

PREMIUM PAG 125 Art.-Nr.

Qty.

250 mL

PREMIUM PAG 100 Art.-Nr.

Art.-Nr.

OL6006.Q.P2

€ -

2592 2592

972

1080

756

196

140

672

152

Packaging

Plastic Tank

Metal Tank

IBC Cube

PREMIUM PAG 150 + UV DYE 2592 2592

Packaging

Art.-Nr.

Qty.

OL6010.Q.P2

250 mL

972

1080

OL6010.M.P2

500 mL

756

OL6010.K.P2

196

OL6010.UP.P2

1 Gal

196

OL6010.I.P2

140

OL6010.P.P2

672

OL6010.K.01

152

OL6010.P.01

OL6010.UV

5 Gal

OL6010.V

20 L

Plastic Tank

Metal Tank

OL6010.T

25 L

OL6010.B

200 L

OL6010.IBC

1000 L

IBC Cube

€ -

2592 2592

972

1080

756

196

140

672

152

Packaging

Plastic Tank

Metal Tank

IBC Cube

A/C Compressor Lubricants

HFO - PAG Lubricants

R1234yf even for ELECTRIC VEHICLE

Before the development of eco-friendly refrigerants such as CO2 and HFO, R134a was the most widely used HFC refrigerant for automotive applications. HFO - PAG lubricants are polyalkylene glycol-based lubricants specially formulated and developed for application with R1234yf in vehicle air conditioning systems. The double bond in the molecular structure of R1234yf makes this refrigerant much more chemically reactive than R134a. The formulation of HFO - PAG solves this problem and maximises the miscibility of the HFO. Precisely for this reason, ERRECOM’s HFO - PAGs differ from the standard PAGs used with R134a by different factors. ■ ■

The basic chemical structure of the lubricant, which in the case of HFO - PAGs is a double-end-capped PAG, while in the case of PAGs for R134a it is single-end-capped The additive package used, which, to ensure the long-term performance of HFO - PAGs, has been developed according to the operating conditions required by HFO - PAG when operating with R1234yf.

Errecom’s HFO - PAGs are characterised by: ■ ■ ■

double-end-capped PAG technology with optimised miscibility in HFO-R1234yf: it ensures full system efficiency;

high-performance additives: they ensure better thermal, chemical and hydrolytic stability of vehicle A/C systems; lower water absorption compared to classic PAGs: it improves the reliability and durability of the system. Analytical Reference Method

Physical Quantity Measured (Unit of Measurement)

ASTM-D445 ASTM-D445 ASTM-D2270 ASTM-D97 ASTM-D93 ASTM-D1298 ASTM-D6304 ASTM-D974

ISO VG

Kinematic Viscosity @ 40°C (cSt) Kinematic Viscosity @ 100°C (cSt) Viscosity Index Pour Point (°C) Flash Point (°C) Density @ 15°C (g/cm³) Moisture Level (ppm) Total Acid (mg KOH/g)

HFO - UNIVERSAL PAG Art.-Nr.

Qty.

OL6059.Q.P2

250 mL

OL6059.M.P2

500 mL

OL6059.K.P2

OL6059.UP.P2

1 Gal

OL6059.I.P2

OL6059.P.P2

OL6059.K.01

OL6059.P.01

OL6059.UV

5 Gal

OL6059.V

20 L

OL6059.T

25 L

OL6059.B

200 L

OL6059.IBC

1000 L

€ -

Qty.

OL6047.Q.P2

250 mL

OL6047.M.P2

500 mL

OL6047.K.P2

OL6047.UP.P2

1 Gal

OL6047.I.P2

OL6047.P.P2

OL6047.K.01

OL6047.P.01

OL6047.UV

5 Gal

OL6047.V

20 L

OL6047.T

25 L

OL6047.B

200 L

OL6047.IBC

1000 L

€ -

HFO - PAG 46

HFO - PAG 100

100

208

213

212

-46

-49

-41

215

220

230

0,999

1,002

300

0,04

HFO - UNIVERSAL PAG + UV DYE

2592 2592

Packaging

Art.-Nr.

OL6060.Q.P2

Qty.

250 mL

972

1080

OL6060.M.P2 500 mL

756

OL6060.K.P2

196

OL6060.UP.P2

1 Gal

196

OL6060.I.P2

140

OL6060.P.P2

672

OL6060.K.01

152

OL6060.P.01

OL6060.UV

5 Gal

OL6060.V

20 L

Plastic Tank

Metal Tank

OL6060.T

25 L

OL6060.B

200 L

OL6060.IBC

1000 L

IBC Cube

HFO - PAG 46 Art.-Nr.

HFO - UNIVERSAL PAG

€ -

2592 2592

972

1080

756

196

140

672

152

Packaging

Plastic Tank

Metal Tank

IBC Cube

HFO - PAG 100 24

2592 2592

Packaging

Art.-Nr.

OL6048.Q.P2

Qty.

250 mL

972

1080

OL6048.M.P2 500 mL

756

OL6048.K.P2

196

OL6048.UP.P2

1 Gal

196

OL6048.I.P2

140

OL6048.P.P2

672

OL6048.K.01

152

OL6048.P.01

OL6048.UV

5 Gal

OL6048.V

20 L

Plastic Tank

Metal Tank

OL6048.T

25 L

OL6048.B

200 L

OL6048.IBC

1000 L

A/C Compressor Lubricants

IBC Cube

€ -

2592 2592

972

1080

756

196

140

672

152

Packaging

Plastic Tank

Metal Tank

IBC Cube

A/C Compressor Lubricants

CO2 - PAG Lubricants

CO 2 even for ELECTRIC VEHICLE

Errecom’s CO2 - PAGs are characterised by: ■

■ ■

double-end-capped technology with optimised miscibility with CO2: it maximises the oil return to the compressor to ensure full system efficiency, without loss of hydrodynamic or lubrication properties; excellent lubricating properties even under extreme pressure and high-temperature conditions; high-performance additives: they ensure excellent thermal, chemical and hydrolytic stability, and reduce downtime and maintenance costs;

■

low hygroscopicity: it ensures lower water absorption than alternative R744 technologies (POE, PAO, Alkylbenzenes);

■

compatibility with metal and plastic components: it ensures optimised system’s stability and durability;

■

high viscosity index and low pour point: they guarantee the full efficiency of the system and excellent lubricating properties even under extreme pressure. Physical Quantity Measured (Unit of Measurement)

Analytical Reference Method

CO2 - PAG 46

CO2 - PAG 68

100

Kinematic Viscosity @ 40°C (cSt)

ASTM-D445

49,7

107,3

Kinematic Viscosity @ 100°C (cSt)

ASTM-D445

10,7

Viscosity Index

ASTM-D2270

213

210

216

Pour Point (°C)

ASTM-D97

-49

-46

-43

Flash Point (°C)

ASTM-D93

> 200

Density @ 15°C (g/cm³)

ASTM-D1298

0,998

0,999

Moisture Level (ppm)

ASTM-D6304

300

500

Total Acid (mg KOH/g)

ASTM-D974

0,02

0,1

ISO VG

CO2 - PAG 46 Art.-Nr.

Qty.

OL6075.Q.P2

250 mL

OL6075.M.P2

500 mL

OL6075.K.P2

OL6075.UP.P2

1 Gal

OL6075.I.P2

OL6075.P.P2

OL6075.K.01

OL6075.P.01

OL6075.UV

5 Gal

OL6075.V

20 L

OL6075.T

25 L

OL6075.B

200 L

OL6075.IBC

1000 L

€ -

CO2 - PAG 68 24

2592 2592

Packaging

Art.-Nr.

Qty.

250 mL

OL6085.M.P2

500 mL

OL6085.K.P2

OL6085.UP.P2

1 Gal

OL6085.I.P2

OL6085.P.P2

OL6085.K.01

OL6085.P.01

OL6085.UV

5 Gal

OL6085.V

20 L

OL6085.T

25 L

OL6085.B

200 L

OL6085.IBC

1000 L

€ -

Art.-Nr.

Qty.

OL6076.Q.P2

250 mL

972

1080

OL6076.M.P2

500 mL

756

OL6076.K.P2

196

OL6076.UP.P2

1 Gal

196

OL6076.I.P2

140

OL6076.P.P2

672

OL6076.K.01

152

OL6076.P.01

OL6076.UV

5 Gal

OL6076.V

20 L

Plastic Tank

Metal Tank

OL6076.T

25 L

OL6076.B

200 L

OL6076.IBC

1000 L

IBC Cube

€ -

2592 2592

972

1080

756

196

140

672

152

Packaging

Plastic Tank

Metal Tank

IBC Cube

CO2 and Lubricants

CO2 - PAG 100 OL6085.Q.P2

CO2 - PAG 100

2592 2592

972

1080

756

196

140

672

152

Packaging

Plastic Tank

Metal Tank

IBC Cube

A/C Compressor Lubricants

E - POE Lubricants

R134a - R1234yf specific for ELECTRIC VEHICLE

Errecom’s POEs are synthetic lubricants specially formulated for electric compressors. They are composed of a blend of polyol esters and additives carefully chosen to obtain better lubricity compared to common POEs, good chemical and thermal stability and excellent wear protection for the components of the A/C system of hybrid or electric vehicles. E-POEs are particularly suitable for non-ozone-depleting refrigerants such as FC and HFC (R134a, R404A, R507, R410A, R407C). They are also Analytical Physical Quantity Measured E- POE 68 E- POE 80 E - POE 100 compatible with hydrocarbon refrigerants, (Unit of Measurement) Reference Method and HFO refrigerants such as HFO-1234yf 68 80 100 ISO VG and HFO-1234ze. They are characterised by 68 80 100 ASTM-D445 Kinematic Viscosity @ 40°C (cSt) optimal miscibility with such refrigerants even 8,9 12 11 ASTM-D445 Kinematic Viscosity @ 100°C (cSt) at the lowest temperatures. Errecom’s E-POEs are characterised by:

branched POE technology: it ensures chemical stability in vehicle A/C systems; ■ low moisture and acid content: it minimises acid growth during the life of the system; ■ excellent electrical insulation properties: it makes the A/C lubricant suitable for use in hermetically sealed systems. ■

Viscosity Index Pour Point (°C) Flash Point (°C) Density @ 15°C (g/cm³) Moisture Level (ppm) Total Acid (mg KOH/g) Electrical conductivity (pS/m) Total Acid (mg KOH/g)

E - POE 68 Art.-Nr.

Qty.

OL6086.Q.P2 250 mL OL6086.M.P2 500 mL 1L OL6086.K.P2 OL6086.UP.P2 1 Gal 4L OL6086.I.P2 5L OL6086.P.P2 1L OL6086.K.01 5L OL6086.P.01 5 Gal OL6086.UV 20 L OL6086.V 25 L OL6086.T 200 L OL6086.B 1000 L OL6086.IBC

Qty.

OL6081.Q.P2 250 mL OL6081.M.P2 500 mL 1L OL6081.K.P2 OL6081.UP.P2 1 Gal 4L OL6081.I.P2 5L OL6081.P.P2 1L OL6081.K.01 5L OL6081.P.01 5 Gal OL6081.UV 20 L OL6081.V 25 L OL6081.T 200 L OL6081.B 1000 L OL6081.IBC

€ -

24 2592 2592 12 972 1080 12 756 756 02 196 196 02 196 196 02 140 140 12 672 672 02 152 152 01 01 24 24 01 24 24 01 04 04 01 -

Packaging

Qty.

OL6033.Q.P2 250 mL OL6033.M.P2 500 mL 1L OL6033.K.P2 OL6033.UP.P2 1 Gal 4L OL6033.I.P2 5L OL6033.P.P2 1L OL6033.K.01 5L OL6033.P.01 5 Gal OL6033.UV 20 L OL6033.V 25 L OL6033.T 200 L OL6033.B 1000 L OL6033.IBC

Art.-Nr.

Qty.

IBC Cube

OL6087.Q.P2 250 mL OL6087.M.P2 500 mL 1L OL6087.K.P2 OL6087.UP.P2 1 Gal 4L OL6087.I.P2 5L OL6087.P.P2 1L OL6087.K.01 5L OL6087.P.01 5 Gal OL6087.UV 20 L OL6087.V 25 L OL6087.T 200 L OL6087.B 1000 L OL6087.IBC

Packaging

Art.-Nr.

Plastic Tank

Metal Tank

130

-42

-39

110 -36

234

270

300

0,975

0,973

0,965

<0,03

<0,04

2500

2300

160

59,8

64,3

>75

€ -

24 2592 2592 12 972 1080 12 756 756 02 196 196 02 196 196 02 140 140 12 672 672 02 152 152 01 01 24 24 01 24 24 01 04 04 01 -

Packaging

Plastic Tank

Metal Tank

IBC Cube

E - POE 80 + UV DYE € -

24 2592 2592 12 972 1080 12 756 756 02 196 196 02 196 196 02 140 140 12 672 672 02 152 152 01 01 24 24 01 24 24 01 04 04 01 -

Plastic Tank

Metal Tank

IBC Cube

E - POE 100 Art.-Nr.

140

E - POE 68 + UV DYE

E - POE 80 Art.-Nr.

ASTM-D2270 ASTM-D97 ASTM-D93 ASTM-D1298 ASTM-D6304 ASTM-D974 ASTM-D2624 IEC 60156

Qty.

OL6082.Q.P2 250 mL OL6082.M.P2 500 mL 1L OL6082.K.P2 OL6082.UP.P2 1 Gal 4L OL6082.I.P2 5L OL6082.P.P2 1L OL6082.K.01 5L OL6082.P.01 5 Gal OL6082.UV 20 L OL6082.V 25 L OL6082.T 200 L OL6082.B 1000 L OL6082.IBC

€ -

24 2592 2592 12 972 1080 12 756 756 02 196 196 02 196 196 02 140 140 12 672 672 02 152 152 01 01 24 24 01 24 24 01 04 04 01 -

Packaging

Plastic Tank

Metal Tank

IBC Cube

E - POE 100 + UV DYE € -

24 2592 2592 12 972 1080 12 756 756 02 196 196 02 196 196 02 140 140 12 672 672 02 152 152 01 01 24 24 01 24 24 01 04 04 01 -

A/C Compressor Lubricants

Packaging

Plastic Tank

Metal Tank

IBC Cube

Art.-Nr.

Qty.

OL6034.Q.P2 250 mL OL6034.M.P2 500 mL 1L OL6034.K.P2 OL6034.UP.P2 1 Gal 4L OL6034.I.P2 5L OL6034.P.P2 1L OL6034.K.01 5L OL6034.P.01 5 Gal OL6034.UV 20 L OL6034.V 25 L OL6034.T 200 L OL6034.B 1000 L OL6034.IBC

€ -

24 2592 2592 12 972 1080 12 756 756 02 196 196 02 196 196 02 140 140 12 672 672 02 152 152 01 01 24 24 01 24 24 01 04 04 01 -

Packaging

Plastic Tank

Metal Tank

IBC Cube

A/C Compressor Lubricants

240 mL Lubricant Cartridges

R134a - R1234yf even for ELECTRIC VEHICLE

EasyGun EasyGun is Errecom’s tool for inserting 240 mL cartridges of additives, UV leak detector dyes, and lubricants in AC/R systems.

CO2 - PAG Art.-Nr.

Description

OL6075.DQ.01 CO2 - PAG 46 OL6076.DQ.01 CO2 - PAG 68

OL6085.DQ.01 CO2 - PAG 100

€ -

Art.-Nr.

2394 2394

IN1032.01

EasyGun

TB5201.01

R134a Adapter

2394 2394

TB5202.01

R1234yf Adapter

2394 2394

PREMIUM PAG Art.-Nr.

Description

OL6057.DQ.01 PREMIUM PAG

OL6001.DQ.01 PREMIUM PAG 46

OL6003.DQ.01 PREMIUM PAG 100 OL6004.DQ.01 PREMIUM PAG 125 OL6005.DQ.01 PREMIUM PAG 150

Description

OL6059.DQ.01 HFO - UNIVERSAL PAG OL6047.DQ.01 HFO - PAG 46

OL6048.DQ.01 HFO - PAG 100

€ -

06 06 06 06 06

2394 2394 2394 2394 2394 2394 2394 2394 2394 2394

€

01 01

Art.-Nr.

€

Description

OL6058.DQ.01 PREMIUM PAG + UV DYE

OL6006.DQ.01 PREMIUM PAG 46 + UV DYE

OL6008.DQ.01 PREMIUM PAG 100 + UV DYE OL6045.DQ.01 PREMIUM PAG 125 + UV DYE OL6010.DQ.01 PREMIUM PAG 150 + UV DYE

2394 2394

06 06

2394 2394 2394 2394 2394 2394

HFO - PAG + UV DYE 06

2394 2394

E - POE Art.-Nr.

PREMIUM PAG + UV DYE

HFO - PAG Art.-Nr.

€

Description

Art.-Nr.

Description

OL6060.DQ.01 HFO - UNIVERSAL PAG + UV DYE

€

06 2394 2394

E - POE + UV DYE Description

OL6086.DQ.01 E - POE 68

OL6081.DQ.01 E - POE 80

OL6033.DQ.01 E - POE 100

€ -

06 06 06

2394 2394 2394 2394 2394 2394

Art.-Nr.

Description

OL6087.DQ.01 E - POE 68 + UV DYE

OL6082.DQ.01 E - POE 80 + UV DYE

OL6034.DQ.01 E - POE 100 + UV DYE

€ -

2394 2394

A/C Compressor Lubricants

2394 2394

A/C Compressor Lubricants

operating even at high temperatures and high pressures avoiding the growth of deposits and sludge;

■ high oxidation stability: it extends the charge in operation,

thus preventing the viscosity of the product from increasing too early;

■ high hydrolytic stability: it protects the oil from

decomposition, even in the presence of small percentages of water;

■ good demulsibilty: it quickly separates oil from the water that may

Physical Quantity Measured (Unit of Measurement)

Analytical Reference Method

to previous lubricants): it avoids clogging of the filters and extends filter replacement intervals;

■ anti-corrosion and anti-rust power: it protects all metal ■ components of the system; ■ anti-foam properties: avoids the formation/presence of foam

and therefore of air that would reduce the system’s efficiency due to the compressibility different from that of oil.

ISO 32

ISO 46

HIGH VISCOSITY ISO 46 HD

ISO 68

ASTM-D445

32,2

46,4

67,9

46,8

ISO VG Kinematic Viscosity @ 40°C (cSt)

have entered the system, further inhibiting the oxidation process; ■ higher filterability even in the presence of water (compared

Kinematic Viscosity @ 100°C (cSt)

ASTM-D445

5,5

7,2

8,8

7,6

Viscosity Index

ASTM-D2270

105

103

102

133

Pour Point (°C)

ASTM-D97

-31

-26

-25

-16

Flash Point (°C)

ASTM-D93

210

215

220

225

Density @ 15°C (g/cm³)

ASTM-D1298

0,870

0,872

0,877

0,845

ISO 32 Art.-Nr.

ISO 46 Qty.

OL6053.Q.P2

250 mL

€ -

OL6053.M.P2

500 mL

OL6053.K.P2

OL6053.UP.P2

1 Gal

OL6053.I.P2

OL6053.P.P2

OL6053.UV

5 Gal

OL6053.V

20 L

OL6053.T

25 L

OL6053.B

200 L

OL6053.IBC

1000 L

Packaging

2592

972

756

196

140

€ -

250 mL

1080

OL6054.M.P2

500 mL

756

OL6054.K.P2

OL6054.UP.P2

1 Gal

196

OL6054.I.P2

140

OL6054.P.P2

OL6054.UV

5 Gal

OL6054.V

20 L

OL6054.T

25 L

Plastic Tank

Metal Tank IBC Cube

OL6054.B

200 L

OL6054.IBC

1000 L

Packaging

2592

972

1080

756

196

140

Plastic Tank

Metal Tank IBC Cube

ISO 46 HD HIGH VISCOSITY INDEX Qty.

OL1008.Q.P2

250 mL

€ -

OL1008.M.P2

500 mL

OL1008.K.P2

OL1008.UP.P2

1 Gal

OL1008.I.P2

OL1008.P.P2

OL1008.UV

5 Gal

OL1008.V

20 L

OL1008.T

25 L

OL1008.B

200 L

OL1008.IBC

1000 L

Qty.

OL6054.Q.P2

ISO 68 Art.-Nr.

Art.-Nr.

Packaging

2592

972

756

196

140

Art.-Nr.

Qty.

€ -

OL1010.Q.P2

250 mL

1080

OL1010.M.P2

500 mL

756

OL1010.K.P2

OL1010.UP.P2

1 Gal

196

OL1010.I.P2

140

OL1010.P.P2

OL1010.UV

5 Gal

OL1010.V

20 L

OL1010.T

25 L

A/C Compressor Lubricants

Plastic Tank

Metal Tank IBC Cube

OL1010.B

200 L

OL1010.IBC

1000 L

Packaging

2592

972

1080

756

196

140

Plastic Tank

Metal Tank IBC Cube

A/C Compressor Lubricants

Oil Charging Pumps ■ Fits the size of each container.

■ Can be used with 10-20-25 L containers.

■ Capacity per shot: 50 mL.

■ Compatible with all types of refrigerant gases.

■ 1/4’’ SAE Male thread.

■ Capacity per shot: 75 mL.

■ Maximum output pressure: 10 bar (145 psi).

■ 3/8’’ or 1/4’’ SAE Male thread (reduction included).

■ Length of closed pump: 41 cm.

■ Maximum output pressure: 17 bar (250 psi).

■ Hose length supplied: 150 cm 1/4 SAE x 1/4 SAE.

■ Hose length: 150 cm 1/4 SAE x 1/4 SAE.

€

Art.-Nr.

PM1012.01

POE

€

Art.-Nr.

PM1013.01

PAG Id

Test for checking the Type of Refrigeration Lubricant inside an AC/R System ■ Recommended when performing maintenance on AC/R systems whose refrigeration

lubricant is unknown.

■ Works with all POE and PAG lubricants. ■ Easy to use. ■ Quick and accurate results in a few seconds:

- clear-looking mixture indicates PAG; - murky-looking mixture indicates POE.

■ Contains 4 tests.

Art.-Nr.

RK1411.S1

€

2160

Oil Guard

Test for checking the Type of Refrigeration Lubricant inside an AC/R System Recommended when performing maintenance on AC/R systems whose refrigeration lubricant is unknown. ■ Works with all POE, ABZ and mineral oils. ■ Saves time and money by avoiding laboratory tests or the use of a refractometer. ■ Avoids making the common and expensive mistake of mixing POE lubricant with mineral oils. ■ Provides reliable results in just a few seconds. ■ Compatible with all types of refrigerant gases. ■ Contains 2 tests. ■

Art.-Nr.

Description

RK1268

Oil Guard R134a

RK1025

Oil Guard R1234yf

€ -

01 01

A/C Compressor Lubricants

Special Bag System

Special Bag System SPECIAL BAG SYSTEM is a packaging system specifically designed to prevent chemical additives used in A/C systems from getting in contact with moisture in the air. UV leak detector dyes and lubricants are packed in moisture-free laminated bags. Simply replace the connections for the additive bottles available on any A/C charging station with the special plastic fittings designed by Errecom. ■ ■ ■ ■ ■ ■

Quick and easy tank filling.

Costs as much as additives in standard pack. Easy to use.

Can be installed on all A/C charging stations. Allows quick, easy, and clean installation.

Prevents moisture and particles from contaminating additives, lubricants and charging stations.

Plastic Adapters with Quick Coupler Art.-Nr.

RP1038.01.W RP1039.01.W RP1038.01.Y RP1039.01.Y

Description

White Straight Connection 90° White Connection Yellow Straight Connection 90° Yellow Connection

€ -

01 01 01 01

Rectangular Tank Art.-Nr.

FLK041 FLK042 FLK075 FLK076 FLK048 FLK049 FLK069 FLK070

Description

250 mL Tank with Plastic Plug - Black (A) 250 mL Tank with Pastic Plug - Yellow (A) 250 mL Tank with 1/8” Thread - Black (B) 250 mL Tank with 1/8” Thread - Yellow (B) 250 mL Tank with Metal Plug - Black (C) 250 mL Tank with Metal Plug - Yellow (C) 250 mL Tank with Metal Quick Coupler - Black (D) 250 mL Tank with Metal Quick Coupler - Yellow (D)

€ -

01 01 01 01 01 01 01 01

B C D

Cylindrical Tank Art.-Nr.

FLK001 FLK004 FLK077 FLK072 FLK025 FLK026 FLK027 FLK028

Description

Special Bag System

€ -

01 01 01 01 01 01 01 01

A B

Special Bag System

Brilliant

Yellow UV Leak Detector Dye for Vehicle A/C systems with R12 - R134a - R1234yf and Electric Compressors Art.-Nr.

TR1083.SH TR1083.S

€ -

Description

150 mL special bag 500 mL special bag

25 10

Blue Brilliant

Blue UV Leak Detector Dye for Vehicle A/C systems with R1234yf and Electric Compressors Art.-Nr.

TR1121.SH TR1121.S

€ -

Description

150 mL special bag 500 mL special bag

25 10

Red Brilliant

Red UV Leak Detector Dye POE-based for Electric Compressors

Art.-Nr.

TR1098.SH TR1098.S

€ -

Description

150 mL special bag 500 mL special bag

25 10

Lubricants for Vehicles A/C Systems 150 mL Lubricants Art.-Nr.

Description

OL6057.SH PREMIUM PAG OL6001.SH PREMIUM PAG 46 OL6003.SH PREMIUM PAG 100 OL6004.SH PREMIUM PAG 125 OL6005.SH PREMIUM PAG 150 OL6033.SH E - POE 100

€ -

150 mL Lubricants + UV DYE 25 25 25 25 25 25

OL6058.SH PREMIUM PAG OL6006.SH PREMIUM PAG 46 OL6008.SH PREMIUM PAG 100 OL6045.SH PREMIUM PAG 125 OL6010.SH PREMIUM PAG 150 OL6034.SH E - POE 100

500 mL Lubricants Art.-Nr.

OL6057.S OL6001.S OL6003.S OL6004.S OL6005.S OL6033.S

Description

PREMIUM PAG PREMIUM PAG 46 PREMIUM PAG 100 PREMIUM PAG 125 PREMIUM PAG 150 E - POE 100

€ -

Description

Art.-Nr.

€ -

25 25 25 25 25 25

500 mL Lubricants + UV DYE 10 10 10 10 10 10

Art.-Nr.

OL6058.S OL6006.S OL6008.S OL6045.S OL6010.S OL6034.S

Description

PREMIUM PAG PREMIUM PAG 46 PREMIUM PAG 100 PREMIUM PAG 125 PREMIUM PAG 150 E - POE 100

€ -

10 10 10 10 10 10

Special Bag System

EN LUBRICANT

#madeinerrecom follow us on

info@errecom.it - errecom.com

ERRECOM USA LLC 1900 North Bayshore Drive 1A Suite 129 33132 Miami FLORIDA - USA

ERRECOM SPA Via Industriale 14 25030 Corzano (Brescia) ITALY

ERRECOM MDE Regus Nassima Tower Office 408A Sheikh Zayed Road Trade Center District DUBAI