EXARO IN-LINE ELECTRICAL PANEL

IN-LINE ELECTRICAL PANEL

Release 01 EN

RANGE CONCEPT The electrical distribution system of the EXARO line is a solution designed for guaranteeing the reliability of IT equipment with an adequate distribution system power supply dedicated to Servers, network equipment and Storage for Data Center, computer room and Network facility.

Available in standard dimensions of 300mm in width, with depth and height equivalent to those of the racks to which they are coupled, guarantees the best power supply management of ICT equipment and air conditioning systems.

Standard cabinet with perforated front door for proper ventilation of the electrical switches and power supply circuits for applications in compartmented islands and hot / cold corridors.

Unique solution for modern Data Centers for: D Flexibility E Single connection to the general panel of the room E Single-phase and three-phase circuit breakers installable and/or hot-swappable (plug & play) E Hot balancing of the load by modifying the work phase of the single switch E Extremely easy maintenance D Modularity E System scalability up to 277kW E Up to 32 differential switches mounted on vertical bus-bar E Remote monitoring of the system The In Line Electric Panel Systems are presented with 42 or 47 units as rack standard, width 300mm and depth 1000 or 1200mm.

PLUS AND MAIN CHARACTERISTICS D PLUS AND MAIN FEATURES E Advanced units for the distribution and control of the power supply of servers installed in rack cabinet E Systems for distributed power supply, with high efficiency and scalable E High resistance structure E High yield strength steel for higher mechanical strength E Thermosetting powder coating with cataphoresis base for maximum protection over time D APPLICATIONS E Data Center and server room with rack server and networking files E PDU power supply and air conditioning systems E Minimum request for environmental space E Positioning flexibility D COMPATIBILITY E Rack Servers and Networking E In-row conditioning systems E Aisle containment with hot/cold corridors D ATTENTION TO DETAILS AND DESIGN E Concept and design made by our research center ETA Next

2

1

2

3

1 2 3 4

Network analyzer Replaced hot swap switch Bus-bar for switch connection Bus-bar

4

3

SPECIFICHE SPECS

D INNOVATIVE SOLUTIONS: E Rack with EXARO base structure for a complete compatibility with the other racks in the line E In line distribution panel with entrance three-phase and outputs single-phase and three-phase E 160A main power switch, 250A, 400A or disconnector E Measurement of total absorption of each phase E Measurement of electrical quantities through network analyzer E Monitorable remotely via connection of network E For internal use in controlled areas D INCLUDES AS STANDARD: E Wheels and leveling feet E Earthing system E Roof with cable entry plate with cable ties for the server and networking PDUs and the eventual arrival from the top of the main power supply E Presence of a large number of holes that allows great flexibility in positioning accessories and options D DOORS: E 80% perforated front door E Blind rear door with perforated window 80% in correspondence with the main switch E 180° door opening E Hinge pins that make it easy removal for door removal E Front and rear door with opening reversible left or right E Door with 4 locking points E Handle with key and linear opening E Possibility of electronic handle with badge type reader, reader recognition footprint, iris scan ...

D SIDEL PANE: E Full height with screw fixing system

4

D FUNCTIONING CRITERIA E The online electrical panel is the safest method to provide distributed, high power efficiency and scalability, in all applications and data center architectures.

E In all these solutions we will have the possibility of a single connection to the main panel of the room with a secondary distribution towards the racks directly inside the island without drafting of large quantities of cables inside of the whole room.

E The In line panel is a distribution system three-phase scalable and on which one can operate without switch off.

E The electrical panel can hold up to 32 residual circuit devices single phase and/or 12 three-phase 16A and 32A, which can be added or replaced hot swap.

E A network analyzer with display, applied to the front door and connected in LAN, allows to check the main electrical quantities (V, A, kW) on the various phases.

E Each switch has its own ground clamp so that the cables of output power is absolutely independent to facilitate any intervention handling.

E The main switch is part of the series of automatic circuit breakers in accordance with IEC 60947-2 standard.

It is equipped with an electronic trip unit which provides overload protection functions (L) and the short circuit (S/I). The regulation can be set using dip-switch positions on the front.

Note All trademarks and registered brand listed in this publication are the property of the respective owners.

5

COMPONENTS Back

300

1000 - 1200

D SAFETY: E Maximum attention to the protection of people and equipment installed inside the rack through the earth connection of all cabinet parts with quick connectors E Copper bar for earth connection equipotential with insulators

D MATERIALS: E Structure made of HSLA steel sheet E Galvanized structure with “magnelis” coating E Some components in zamak/plastic

D DIMENSIONI: D Standard (WxDxH): E 300x1000mmx42U E 300x1000mmx47U E 300x1200mmx42U E 300x1200mmx47U

D REGULATIONS AND STANDARDS OF REFERENCE E CEI EN 60204-1 E CEI EN 61439-1 E CEI 17-13/1 E CEI 17/43 E CEI 64/8 E CEI EN-60950-1 E CEI EN-60529

D COLORS: E Cathodic electrophoresis paint with resin and finishing with epoxy-polyester powders E ETA standard electrostatic cycle E Standard Black RAL 9011 E Possibility to have different RAL colors

6

42U - 47U

Side

1960 - 2200

Front

D OPTIONS E Circuit Monitoring System CMS700

D CONFORMITY E Directive 2006/95/CE E Directive 2004/108/CE E RoHS

EXQE4210160S EXQE4212160S

Dimensions and codes Dimensions Units W D H 300 1000 1960 42 300 1200 1960 42

EXQE4210250S EXQE4212250S

300 300

1000 1200

1960 1960

42 42

EXQE4210400S EXQE4212400S

300 300

1000 1200

1960 1960

42 42

EXQE4710160S EXQE4712160S

300 300

1000 1200

2200 2200

47 47

EXQE4710250S EXQE4712250S

300 300

1000 1200

2200 2200

47 47

EXQE4710400S EXQE4712400S

300 300

1000 1200

2220 2220

47 47

EXQE4210160D EXQE4712160D

300 300

1000 1200

1960 2200

42 47

Code

160A

250A

400A

             

LEGENDA Code

EXQE 42 10 160 S:

EXQE 42 10 160 S

Range Nr. of units (42/47) Depth (10=1000 / 12=1200) Main switch (in Ampere) Configuration (“S”=single / “D”=double)

7

ZAPPA ASSOCIATI CONCEPT E.T.A. S.P.A. 22035 Canzo - Como (Italy) Via Monte Barzaghino, 6 t. +39 031.673.611 f. +39 031.670.525 infosede@eta.it

E.T.A. ENCLOSURES (UK) LIMITED Unit 2, Ignite, Magna Way Rotherham, South Yorkshire, S60 1FD t. +44 01709 386630 f. +44 01709 369524 info@eta-enclosures.co.uk

www.eta.it

www.eta-enclosures.co.uk

SASU E.T.A. France Rue du Pré aux Boeufs 76806 St Etienne du Rouvray t. +33 02 35643470 f. +33 02 35642275 info@etafrance.fr

ETA ENCLOSURES Sp. z o.o.

Sikorskiego 44, 62-300 Września (Polonia)

E.T.A. SPB Shpalernaya ul. 54 191015 St.Petersburg (Russia)

biuro@eta-enclosures.it

www.etafrance.fr www.eta-enclosures.it

www.eta.it