FabChair
Barcelona 2010
Fab Design
FabChair
Materials: Wood 20 mm, 833x406mm - 1 piece. 1/3 of a standard plywood sheet SOFTWARE– Rhinoceros (Modeling) Partworks 3 (Dogbones) SET- 4 nuts and 4 screws (The ones that come with shopbot) TECNOLOGY USE - CNC Cutting Machine: CNC Milling – Shopbot PRSalpha 144 Designer: Tomas Diez
A Wood Drillbit 6mm diameter flat end. Set Shopbot and spindle speed as desired * as long as the machine moves the material doesn’t fly and the bit doesn’t break
B Cutting process: about 10 min.
C Remove cut pieces from the wood and place them on a clean flat surface.
5
1
4
2
3 2 Use this drawing as a reference
3
2. Fit the back and the seat with this piece.
Assembly: 1.Start by placing the piece in a flat surface, and fit the back and the seat with this piece.
3. Fit the crossbars with the same piece.
4. Finally fit the missing piece with the structure and add nuts and screws together as shown.