Assembly instructions ALBA R09-A BALUSTRADE
How to mount the ALBA R09-A system
1Hole Ø16x130
min.50 min.50
mounting on reinforced concrete: mark and drill according to the hole interaxis of the glass sheets.
Irregolarità muratura muratura
2
align the heads of the rods as much as possible on an ideal plumb flat surface.
Evaluate the insertion depth according to the glass thickness, considering the position of the adjuster halfway through (+5 mm)
Chemical resin
Possible irregularities on the masonry
Clean the holes from dust; apply chemical resin; insert the m14x178 rods previously removed from the rest of the r09-a accessory; the depth of the rods must be evaluated according to the glass thickness and any irregularities.
ARCHITETTURE TRASPARENTI ARCHITETTURE TRASPARENTI
Spacer bushing Ø28
How to mount the ALBA R09-A system
Nut m14
When the resin is dry, screw the Ø28 spacer bushing on the rod up to the masonry. Then tighten the m14 nut on the spacer.
minimum distance wall-glass=34mm maximum distance wall-glass=44mm
Possible irregularities on the masonry
Screw the boss, insert the first spacer and the bushing, adjust the 4 (6) bosses so that they are coplanar. Leave a few adjusting millimeters between the boss and the masonry for any subsequent adjustments.
4 3
ARCHITETTURE TRASPARENTI ARCHITETTURE TRASPARENTI 5 Fit the glass, the spacer, the outer boss and the m6 bolt in place. Check the correct positioning and make the final adjustments, if necessary, then tighten the m6 bolt. TECHNICAL dATA sHEET References for processing glass sheets FARAONE SRL SEDE via Po 12 - 64018 Tortoreto Lido (TE) T 0861 784200 F 0861 781035 @ faraone@araone.it WEB www.faraone.it ARCHITETTURE TRASPARENTI ARCHITETTURE TRASPARENTI How to mount the ALBA R09-A system esempio variabile da 21 a 25 side elevation r09-a esempio 1200 esempio variabile VaLID IN ITaLY class 200 kg/m h solaio 1100 1400 esempio 1200 Ø30 Ø30 A A B B 20 min 130 h solaio da 1000 a 1100 da 1300 a 1400 max 1200 A B A B 20 min 120 HOLE a max 1200 from 1300 to 1400 from 1300 to 1400 from 1000 to1100 from 1000 to1100 h floor h floor min 120 min 120 min 50 max 200 max 200 max 400 max 400 Ø22 a a a a a a 50 from 34 to 44 from 21 to 25 Ø22 1,5 PVB 10 or 12 10 or 12 REV 00-08/2021