PN / Product News ITALIAN STYLE
www.faraone.it
INFORMS WITH NINFA3, EVERTHING IS CHEAPER!
02/2014
18
3 NINFA THE THIRD GENERATION
WITHIN THE NINFA FAMILY, AN ANNOUNCED SUCCESS!! NINFA3
NINFA MURETTO
WITH NINFA, YOU ARE ALWAYS A STEP AHEAD!
NINFA50
FARAONE INFORMS NP18
20 14
2
ne
w
patented system . design Nino Faraone / Matteo Paolini static project . Mr. Gabriele Romagnoli
3 NINFA THE THIRD GENERATION is based on the
adjusting key
experience of more than 120,000 meters of NINFA installed in 4 years and the total satisfaction of customers and installers. The Ninfa 2013 project was born to establish new records. - REDUCTION OF GLASSES THICKNESS - INSTALLATION TIME REDUCED BECAUSE OF PRE-INSTALLED ACCESSORIES - THRUST RESISTANCE CERTIFICATION OF 200 AND 300 KG/M WITH THE SAME PROFILE - PROFILE HEIGHT REDUCED TO 120 MM
ALWAYS ADJUSTABLE GLASS BANISTER. NEVER AGAIN WATER INSIDE THE FASTENING HOLE.
Anti-water infiltration gasket. PATENTED SYSTEM
PN / Product News
FARAONE INFORMS NP18
3
ITALIAN STYLE
WITH NINFA3, EVEN GLASSES* ARE CHEAPER ! register
FASTENING SCREWS - WITH NINFA3 THE FASTENING SCREWS TO ADJUST THE GLASS ARE SUPPLIED IN CONTINUOUS BARS, IN ORDER TO FASTEN THE GLASS ALL ALONG ITS LENGTH. THE FIRST AND ONLY SYSTEM IN THE WORLD.
carter
BY USING THE CARTERS YOU HAVE EXCLUSIVE ADVANTAGES:
Ninfa3 in its LED version
1 BY MOUNTING THE CARTERS AT THE END OF THE WORKS, YOU AVOID ALL DAMAGES UNINTENTIONALLY PRODUCED BY WORKERS; 2 IN CASE OF FUTURE DAMAGES, THEIR SUBSTITUTION WILL BE FAST AND SIMPLE; 3 TRANSPORTATION CAN DAMAGE THE PROFILES, BUT IT IS CHEAPER TO CHANGE THE CARTERS RATHER THAN TO CHANGE THE PROFILES; 4 THEY COVER UP NINFA PROFILES’ JUNCTIONS AND ANY WATER DRAINING; 5 THE USE OF CARTERS AUGMENTS THE CHOICE OF AVAILABLE FINISHINGS AND COLORS.
* ONLY TEMPERED GLASS
the glass banister is certified for a thrust resistance of 200kg per linear meter with a 8+8+0.76 glass instead of a 10+10+1.52 one, and 300kg per linear meter with a 10+10+1.52 glass instead of a 12+12+1.52. with the same warranty.
4
FARAONE INFORMS NP18
TAKES 01 FARAONE CARE OF:
TAKES 02 FARAONE CARE OF:
Drilling the base of the profile every 30cm (thrust resistance 200kg/m) or every 20cm (thrust resistance of 300kg/m), inserting the fastening screws and the rigid gasket in their place.
Making it easy for you to insert the glass in the profile
2A supplying you with
a profile with gasket inserted, which blocks the glass when you insert it and compensates the thickness differences
01A IMPORTANT: the rubber gaskets are employed to avoid water infiltration in the fastening hole
fastening screws to be placed approximately every 30cm
2B supplying you
01B you only need
with the internal adjustment system (with gasket inserted) to hook on the adjusting screws
to drill the floor and fasten the profile with Faraone’s certified screws
2B
2A
< internal side
01A rubber gasket Anti-water infiltration gasket. PATENTED SYSTEM
< internal side
PN / Product News
FARAONE INFORMS NP18
5
ITALIAN STYLE
TAKES 03 FARAONE CARE OF:
ONLY 04 YOU NEED TO:
Supplying you with a system to easily adjust the glass with the fastening screws. You only need to clamp down the internal and external adjusting screws in order to fasten the glass
external adjusting > screws
Check that everything is well done and fix the carter with a click. The carter has already the gaskets on. You are already done!
< internal adjusting screws
< internal side
external > carter
< internal carter
FARAONE INFORMS NP18
NINFA MURETTO
THE ALWAYS ADJUSTABLE ALL GLASS BANISTER.
patented system . design Nino Faraone / Matteo Paolini static project . Mr. Gabriele Romagnoli
All goals set by Faraone have been achieved
adjusting key
- The use of 8+8+1.52 tempered laminated glass only - Maximum height of glass: 800mm - Profile height: only 90mm - Speedy installation 8+8+0.76PVB - Thrust resistance certification of 200kg/m
< internal side
90
1020 / 1120
max 800
6
PN / Product News
FARAONE INFORMS NP18
ne
w
20 14
ITALIAN STYLE
NINFA MURETTO
THE ALWAYS ADJUSTABLE, ALL GLASS BANISTER. PROFILE HEIGHT OF ONLY 90mm.
NINFA MURETTO HAS ARRIVED!
Place the profile as close as possible to the internal side of the wall to avoid all climbing possibility
7
8
FARAONE INFORMS NP18
PN / Product News
FARAONE INFORMS NP18
ITALIAN STYLE
NINFA50
THE SMALLEST OF THE NINFA FAMILY.
20 14
design Nino Faraone / Roberto Volpe static project . Mr. Gabriele Romagnoli
ne
w
Designed to be used with a glass height of maximum 60cm and certified for 200kg/m - Only 8+8+0.76/1.52 tempered glass - Maximum glass height of 600 mm - Maximum profile height of only 62mm - Speedy installation - Thrust resistance certification of 200kg/m
internal
62
anti-climbing barrier for kids
max 15
43.2 66.5
max 600
external
READY TO INSTALL, SUPPLIED WITH CERTIFIED AND ALREADY INSERTED FASTENING SCREWS.
9
FARAONE INFORMS NP18
1 Only one price per linear meter, with all the fittings and Faraone’s certified Fischer fastening
screws included;
2 The thrust resistance certificate will be delivered and will be valid only with the use of the supplied screws, which are the ones employed during the laboratory tests to fix the profile on the concrete / On demand, screws to fix the profile on an iron girder, or other types, can be supplied. (The certificate doesn’t have any value if the profile is fixed on masonry or with unsuitable screws or resins). 3 For every order which doesn’t include fastening screws, 3€ per linear meter (discount excluded) will be deduced from the below mentioned prices; 4 Price increase: for every supply of profile and fittings for Ninfa 3 class of 300kg/m, there will be a price increase of 4€ per linear meter due to the higher number of holes and fastening screws required; 5 For every anodization of 20 microns, there will be a price increase of 8%.
3 NINFA PRICE LIST 2014
TECHNICAL DESIGN
PRICE price / euro/m
147,40 116 Raw aluminium profile
with fittings already inserted and certified fastening screws (chemical not included).
M12 screws are included in the price
RAW
price / euro/m
165,00
92,5
RAW
price / euro/m
167,20 SILVER
120
10
M12 screws are included in the price 95
IN BARS Raw aluminium profile with fittings already inserted and certified fastening screws (chemical not included). The anodized aluminium carter for one side and its gasket are included.
price / euro/m
173,80 POLISHED SIMIL INOX
price / euro/m
170,50 RAL 9010
price / euro/m
191,40 SILVER
ARTICLE and DESCRIPTION
M13/16
kit with fittings for a 8+8+0.76/1.52 glass
M13/20
kit with fittings for a 10+10+1.52 glass in bars of 3 or 6m
M13-T/16
kit with fittings for a 8+8+0.76/1.52 glass
M13-T/20
kit with fittings for a 10+10+1.52 glass in custom cut bars
M13-1/16/A
kit with fittings for a 8+8+0.76/1.52 glass
M13-1/20/A
kit with fittings for a 10+10+1.52 glass in bars of 3 or 6m
M13-1/16/B
kit with fittings for a 8+8+0.76/1.52 glass
M13-1/20/B
kit with fittings for a 10+10+1.52 glass in bars of 3 or 6m
M13-1/16/C
kit with fittings for a 8+8+0.76/1.52 glass
M13-1/20/C
kit with fittings for a 10+10+1.52 glass in bars of 3 or 6m
M13-1T/16/A
kit with fittings for a 8+8+0.76/1.52 glass
M13-1T/20/A
kit with fittings for a 10+10+1.52 glass in custom cut bars
PN / Product News
FARAONE INFORMS NP18
ITALIAN STYLE
PRICE
120
TECHNICAL DESIGN
M12 screws are included in the price 95
CUSTOM CUT BARS Raw aluminium profile with fittings already inserted and certified fastening screws (chemical not included). The anodized aluminium carter for one side and its gasket are included.
price / euro/m
196,90 POLISHED SIMIL INOX
ARTICLE and DESCRIPTION
M13-1T/16/B
kit with fittings for a 8+8+0.76/1.52 glass
M13-1T/20/B
kit with fittings for a 10+10+1.52 glass in custom cut bars
price / euro/m
194,70 RAL 9010
M13-1T/16/C
kit with fittings for a 8+8+0.76 glass
M13-1T/20/C
kit with fittings for a 10+10+1.52 glass in custom cut bars
price / euro/m
181,50
120
SILVER
M12 screws are included in the price 97
IN BARS Raw aluminium profile with fittings already inserted and certified fastening screws (chemical not included). The anodized aluminium carter for both sides and their gaskets are included.
M13-2/16/A
kit with fittings for a 8+8+0.76 glass
M13-2/20/A
kit with fittings for a 10+10+1.52 glass in bars of 3 or 6m
price / euro/m
192,50 POLISHED SIMIL INOX
M13-2/16/B
kit with fittings for a 8+8+0.76 glass
M13-2/20/B
kit with fittings for a 10+10+1.52 glass in bars of 3 or 6m
price / euro/m
187,00 RAL 9010
M13-2/16/C
kit with fittings for a 8+8+0.76 glass
M13-2/20/C
kit with fittings for a 10+10+1.52 glass in bars of 3 or 6m
price / euro/m
214,50
120
SILVER
M12 screws are included in the price 97
CUSTOM CUT BARS Raw aluminium profile with fittings already inserted and certified fastening screws (chemical not included). The anodized aluminium carter for both sides and their gaskets are included.
M13-2T/16/A
kit with fittings for a 8+8+0.76 glass
M13-2T/20/A
kit with fittings for a 10+10+1.52 glass in custom cut bars
price / euro/m
225,50 POLISHED SIMIL INOX
M13-2T/16/B
kit with fittings for a 8+8+0.76 glass
M13-2T/20/B
kit with fittings for a 10+10+1.52 glass in custom cut bars
price / euro/m
220,00 RAL 9010
M13-2T/16/C
kit with fittings for a 8+8+0.76 glass
M13-2T/20/C
kit with fittings for a 10+10+1.52 glass in custom cut bars
11
FARAONE INFORMS NP18
TECHNICAL DESIGN
116 mm
KIT including: - aluminium profile M13 of 320mm; - fittings for a 8+8+0.76 glass. - certified fastening screw (chemical not included). 320 mm
PRICE
ARTICLE and DESCRIPTION
price / euro/cad.
57,20
M13-N-320/16
price / euro/cad.
30,80
M13-N-150/16
price / euro/m
M13-3/16/A
NINFA続 in pieces for a 8+8+0.76/1.52 glass
Valid only for the class of 200kg.
116 mm
KIT including: - aluminium profile M13 of 150mm; - fittings for a 8+8+0.76 glass. - certified fastening screw (chemical not included). 150 mm
NINFA続 in pieces for a 8+8+0.76/1.52 glass
Valid only for the class of 200kg.
35,20
couple of profiles for a 8+8+0.76 glass
SILVER m 0c x5 a m
320 mm
IN BARS Couple of aluminium anodized carters with their gasket.
150 mm 116
12
in bars of 3 or 6m
price / euro/m
47,30
M13-3/16/B
couple of profiles for a 8+8+0.76 glass
POLISHED SIMIL INOX in bars of 3 or 6m
320 mm
couple of countinuous carters
couple of countinuous carters
For the 6 meters bars or custom cut bars of more than 3 meters, the order will be sent in a wood box to avoid damages to the profiles. (price to be quoted)
price / euro/m
41,80
M13-3/16/C
couple of profiles for a 8+8+0.76 glass
RAL 9010 in bars of 3 or 6m
price / euro/m
23,10
M13-3/16/D
couple of profiles for a 8+8+0.76 glass
RAW in bars of 3 or 6m
PN / Product News
FARAONE INFORMS NP18
ITALIAN STYLE
TECHNICAL DESIGN
m 0c x5 a m
320 mm
CUSTOM CUT BARS Couple of aluminium anodized carters with their gasket.
116
150 mm 320 mm
couple of countinuous carters
couple of countinuous carters
PRICE
ARTICLE and DESCRIPTION
price / euro/m
M13-3T/16/A
52,80
in custom cut bars
price / euro/m For the 6 meters bars or tailor cut bars of more than 3 meters, the order will be sent in a wood box to avoid damages to the profiles. (price to be determined)
couple of profiles for a 8+8+0.76 glass
SILVER
64,90
M13-3T/16/B
couple of profiles for a 8+8+0.76 glass
POLISHED SIMIL INOX in custom cut bars
price / euro/m
59,40
M13-3T/16/C
couple of profiles for a 8+8+0.76 glass
RAL 9010 in custom cut bars
price / euro/m
2
26,40 40
SILVER
space available for mounting and dismantling
M13-4
profile and with double sided tape for fixing en barres de 3m
Couple of aluminium profiles with silver anodized angulars 20X40
drowned profile EXAMPLE 1
M13-5 CARTER PRICE WILL BE QUOTED ACCORDING TO THE PROJECT EXAMPLE 2
EXAMPLE 3
sheet of silver satin aluminium or stainless steel, either satin or polished. To be bended as requested
13
FARAONE INFORMS NP18
TECHNICAL DESIGN
PRICE
ARTICLE and DESCRIPTION
price / euro/cad.
M13-6/A
7,80 118
price / euro/cad.
9,90 3
97
NINFA MURETTO PRICE LIST
price / euro/cad.
7,80
bouchon pour fermeture terminale en aluminium anodisĂŠ argent (vis inox comprises)
M13-6/B
simil inox anodized alumnium ending (inox screws included)
M13-6/C
RAL 9010 Aluminium ending cap (inox screws included)
Silver satin aluminium profile with fittings and gasket already installed. Fixing drills performed every 30cm.
2014
TECHNICAL DESIGN
PRICE
ARTICLE and DESCRIPTION
price / euro/m
NM01
151,80 SILVER SATIN
for 8+8+0.76/1.52 glass with fittings and floor fastening screws.
90
in bars of 3 or 6m
price / euro/m
172,70
87
SILVER SATIN
NM01T
for 8+8+0.76/1.52 glass with fittings and floor fastening screws. in custom cut bars
price / euro/cad.
7,80 SILVER 97
14
3 87
NM04
aluminium silver anodized ending cap (inox screws included).
PN / Product News
FARAONE INFORMS NP18
ITALIAN STYLE
50 NINFA PRICE LIST 2014
DELIVERY FROM JANUARY 2014
TECHNICAL DESIGN
PRICE
ARTICLE and DESCRIPTION
price / euro/m
NM50
104,50 62
Silver anodized aluminium profile with fittings and fastening screws.
kit with fittings for a 8+8+0.76 glass
SILVER in bars of 3 or 6m
price / euro/m
118,80
NM50-T
kit with fittings for a 8+8+0.76 glass
SILVER in custom cut bars
61.5
price / euro/cad
7,80 66,5
NM50-1
aluminium anodized ending cap (or painted)
SILVER
IMPORTANT: during the order, please specify the desired thrust resistance: 200kg/m or 300kg/m. DELIVERY: to be agreed. BARS LENGHT (to be specified during the order)
NEW FARAONE TESTS LABORATORY News on the new installation: - dimensions: 5.50 X 2m - banisters fixed on concrete base in order to simulate a terrace (and not on an iron beam) - even the fastening screws are tested; - thrust resistance test carried on with a display for the control of the administrated force; frontal laser to read the banister flection; - test results are automatically printed. - thrust test performed with a leather bag and a tyre. - certification delivered by an authorized organisme. Important: pay attention to the fastening! Tests shows that mechanical screws or chemical fixing can slip away if they have not the appropriate size and if they are not tested.
NEW CERTIFICATION: all tests have been updated and are performed on a concrete base: Faraone is the first and only one in Italy to deliver the certification even for the screws.
The 80 participants to the inauguration of the new installation during the 2nd FARAONE Expert Meeting in 2013.
15
layout grafico: Roberto Volpe / immagini fotorealistiche: Stefano Spinosi / render di dettaglio: Roberto Volpe / foto copertina: Massimo Mozzillo / mcomunicare.it
PN / Product News ITALIAN STYLE
DONâ&#x20AC;&#x2122;T TASTE THE UNSAFE!
> Modifications of the products. Our products are subject to continuous improvement and for this reason, the characteristics of the construction or design are subject to change without notice.
Would you like to receive a specimen of ninfa3 or ninfa 50? Our specimens are delivered for free in their small suitcase; you will pay only the shipping.
authorized dealer A R C H I T E T T U R E
T R A S P A R E N T I
FARAONE S.r.l. VIA PO, 12 64018 TORTORETO (TE) ITALY TEL. +39 0861.784200 FAX +39 0861.781035
www.faraone.it faraone@faraone.it