FirstSpear Catalog v22

Tubes® Rapid-Release Technology

FirstSpear is in the business of providing innovative solutions to long unanswered challenges. Our Tubes ™ technology reaffirms that position. The common closure method for most armor carriers on the market today is to join the cummerbund in the front with hook & loop fasteners. This presents many performance failures.

The hook & loop adds weight and bulk, is noisy and wears out quickly, retains water, mud and snow. From a safety standpoint the hook and loop closure flap allows for cummerbund protection accessories like side plates and inflatable flotation to shift position and misalign from where they should be to provide maximum performance. The common release mechanisms found in vests utilize a variety of cables, routed through a complex maze of channels. When assembled correctly these can be clumsy, heavy, awkward and complicated to reassemble, if assembled incorrectly the results can be catastrophic.

FirstSpear Tubes Rapid-Release Technology solved all these challenges. Quick to close and even quicker to doff, Tubes fasteners are manufactured from lightweight high-performance polymers that exceed the strength of other molded fasteners currently used on operational equipment. Molded in signature suppressive colors and with a variety of choices for activation, this closure system can be rapidly deployed and completely reassembled in SECONDS.

Let FirstSpear show you how Tubes technology will improve performance, enhance mission functionality, reduce weight and allow you to ditch the cable.

U.S. Patent No. 10051984

Most people spend a lifetime hoping that peril never finds them; they are sheltered from peril by those who run to gunfire and take the fight to the enemy. These are professionals built for the X.

FirstSpear equips those bound for the fight with every advantage possible. Perfection is demanded from the tools FirstSpear creates, and there is no forgiveness for anything that misses the mark. Those exposed to the dangers of the X deserve nothing less than perfection.

FirstSpear continues to innovate and design for the “Primus Pilus.” FirstSpear end users are the spearpoint of the elite. They are modern-day centurions who push farther, fight harder, and demand flawless execution from every operator in their cadre and every tool in their arsenal. FirstSpear embraces that creed and the aspiration to achieve what others deem unattainable. Our constant pursuit of perfection in everything we design and manufacture is because the smallest detail can mean the difference between life and death.

FirstSpear’s passion lies in the pursuit and development of disruptive innovation and technologies designed to pass the ultimate test; empowering those who deploy them to dominate objectives and prevail in the spirit of our storied namesake.

We are FirstSpear, and everything we do is Built for the X.

Split Bar Tubes are available on the website.

LaserFrame pocket suites continue to evolve to better serve the warfighter.

2021

U.S. Air Force has deemed the FirstSpear ABAV (Aviation Body Armor Vest) safe to fly for rotor wing operations.

U.S. Airforce Global Strike Adopts ABAV.

FS Launches Patented LaserFrame Technology.

2020

USMC begins fielding GEN III Plate Carrier with Tubes and 6/12.

FS Wins MAAWS Pocket Contract for MARCORSYSCOM.

U.S. Marshals continue utilizing FS Strandhögg and Siege-R.

ADF Adopts FirstSpear Tubes.

U.S. Airforce Red Horse adopts Strandhögg & 6/12 Technology.

FirstSpear ® emerges from a bloodline of industry innovation; founded by a team of experienced industry professionals and former U.S. servicemen with a mandate to shift industry paradigms and upend the status quo.

TUBES® TECHNOLOGY WAS BORN.

INNOVATIVE 2011 2018 2019

FS Wins ABAV Contract.

FirstSpear wins inventor of the year.

U.S. Marine Corps to field Gen III Vest with FS Technology.

Mexican Marines Adopt Protactic Vest System with FS Technology.

FirstSpear wins US SOCOM Aviation Contract.

2012

Disruptive Technology—FS launches first production tactical vest with laser cut MOLLE compatible platform alongside tubes. With roughly 40% weight reduction, tubes & 6/12, revolutionized the load carriage world.

FS introduces 6/12 Retro-Fit Cummerbund upgrading other armor carriers to give end users Tube and 6/12 technology.

NSW adopts 6/12 and Tubes on the SCAR H Chest Rig.

Irish Rangers adopt FirstSpear kits.

U.S. Army adopts MSV, utilizing FirstSpear 6/12 Laser Fusion.

FirstSpear partners with NFM.

Norwegian SOF Adopts the FS Aegir.

Swedish SOF Adopts the FS Aegir.

U.S. Navy adopts Tubes and 6/12 Technology.

USMS Adopts Tubes and 6/12 Technology. NSW selects Aegir for Dive ops.

2013 2014 2015 2016 2017

AAC Frog Kit adapts FS Assaulter Armor Carrier for use in a maritime environment.

Tubes are now available for individual and commercial sale to approved manufacturers.

Australian Defense Force adopts Tubes.

UK SOF Adopts Aegir.

REVOLUTIONARY

6/12™ ModulaR plaTfoRM Technology

There are several philosophies on dealing with weight as it applies to load carriage. Some development has occurred in lightweight materials, but these tend to sacrifice performance. FirstSpear has taken a different approach.

Benefits of the 6/12 platform include, up to 50% reduction in weight and significantly less bulk. It’s backward compatible with standard MOLLE/PALS and eliminates pocket shifting when used in conjunction with FS’s 6/12 pockets.

The FirstSpear team invested more than a year developing and testing the FirstSpear 6/12 Pocket Attachment System. It utilizes state of the art fabric technologies to deliver a completely modular system, compatible with standard MOLLE pockets. From adhesive heat-set backing to laser cut precision attachment points, the 6/12 system is a completely new, design-engineered solution that meets the need for modular, lightweight load-carriage platforms and pockets.

Additionally, 6/12 provides greater fabric flexibility on unarmored platforms and tighter mounting of pockets to create a cleaner silhouette that aides in enhanced signature management and mobility. The 6/12 platform face is completely slick when pockets are removed and allows for easy management of communications cables and wires.

6/12™ ModulaR pockeT Technology

Weight reduction is not just a buzz phrase at FirstSpear–it is an ethos demonstrated by the 6/12 pocket line. Utilizing these pockets on FirstSpear 6/12 platforms allows the wearer to achieve a weight reduction of over 40% without sacrificing performance and completely eliminates pocket shifting normally associated with traditional MOLLE/PALS style pockets. By removing the heavy nylon webbing, polymer reinforcement and metal snaps of the previous system, not only is weight reduced, but the overall profile of the pocket on the platform is significantly condensed as well, allowing improved signature management in all visual, IR and thermal spectrums.

U.S. Patent No. 9974379

MultiMag Rapid Adjust™ Technology w/ BOA

Originally developed to replace traditional laces on snowboard boots, the BOA® system is quickly becoming the standard for micro adjustment in the harshest and most demanding environments. Through careful collaboration with the BOA® Performance Fit Lab, FirstSpear integrates the latest lightweight compression and fit technology into personal protection and load carriage products for the Armed Professional. Micro adjustment increases product flexibility, significantly reducing the multitude of products and change over required to be mission ready. Each product integration is meticulously tested and refined to ensure the highest performance. One example of this is the FirstSpear MultiMag Rapid-Adjust Pocket. Featuring patented adjustment and retention hardware from BOA®, the operator can quickly adjust the pocket to fit a wide range of firearm magazines and other similar sized items.

6/9 Modular Pocket Technology

Developed specifically for those users who have not yet adopted FirstSpear 6/12 platforms, the 6/9 Modular Pocket Technology is not only completely backward compatible with legacy MOLLE/ PALS style load carriage or armor carrier platforms, but also offers significant weight reduction over traditional MOLLE/PALS pockets. Due to the flexible nature of the attachment straps and tighter tolerances when compared to traditional MOLLE/PALS, 6/9 pockets actually mount closer to the body and conform tighter to the platform.

Already adopted by professional users within the joint U.S. Special Operations Forces community, this system provides many advantages over the traditional MOLLE/PALS system and can further help facilitate transition into the 6/12 Modular Pocket Technology where the ultimate in weight savings, signature management and tight fit can be achieved.

U.S. Patent No. 9565922 B2

TECHNOLOGY

TECHNOLOGY

EVOLUTION

Cell Tags

FirstSpear has pioneered a unique and effective way to identify key and specific personnel under passive and thermal night vision systems. A FirstSpear patented process, utilizing the latest reflective glow tapes and precision cutting and bonding processes, this item will relay a call sign, identifier or other information on teh exterior of the User’s clothing or equipment (hook backed). This capability can be tailored to include overt illumination glow tape, passive NR or thermal or a combination of both glow and IR.

An all new alpha-numerical call sign/identifier that uses only nylon fabric backing and NO glow or IR material. It’s an extremely durable clear vinyl that covers the fabric backer for improved durability.

U.S. Patent No. 8540831

Advanced Clothing Materials

ACM™ (Advanced Clothing Material™) is 100% sourced verified American Merino Wool combined with our other quality materials. By using a unique blend of each product, FirstSpear® is able to tailor each item to its intended purpose. By using Merino Wool, FirstSpear® is able to capitalize on all the naturally occurring material characteristics.

It feels soft and is lightweight. It allows you to ditch the itch thanks to the finer fiber’s smaller diameter. It helps regulate your body temperature better than any synthetic fabric and will keep you comfortable in a wide range of temperatures. When it is warm outside the wool will wick moisture away from the skin and into the air, keeping you cool. When it is cold outside the wool will trap the warm air and keep you comfortable.

Merino wool can absorb up to 30 percent of its weight in moisture and still maintain its ability to insulate, keeping you dry and warm out in the elements. While the core of the Merino fiber is capable of absorbing up to a third of its dry weight in moisture, the surface or Merino fibers have a waxy coating that repels liquids. This surface layer is not easily removed by washing or processing. Water droplets on the surface of Merino will bead and roll off instead of being absorbed into the fabric.

Merino wool also has the highest natural fire resistance of all commonly used textile fibers. The outer layer of wool fibers have a high concentration of fatty acids, which have anti-bacterial properties, which also helps to diminish body odor. Merino wool is a completely renewable fiber source; Merino sheep produce a new fleece every year. It is also composed of a natural protein that is biodegradable. When disposed of, Merino wool decomposes in the soil in a matter of years.

EVOLUTION

LASERFRAME

laseRfRaMe™

FirstSpear continues to innovate and develop cutting edge technologies to give war fighters and first responders the utmost edge. LaserFrame is a hemless design and construction that dramatically reduces weight, decreases the pocket’s footprint and retains its shape when empty, all of which combine to allow for a sleeker overall platform.

The patented construction method for LaserFrame pockets combines precision laser fusion, stitch line placement, and laminate selection into a pocket that is both structurally rigid yet collapsible. Reducing the amount of material used in the construction of LaserFrame pockets allows us to cut unnecessary weight and bulk, resulting in a more streamlined overall platform for the user. LaserFrame pockets use our patented 6/9 attachment system which also works with our patented 6/12 Laser Fusion and legacy MOLLE platforms.

U.S. Patent No. 10,888,150 B2; 9,565,922 B2; 9,974,379 B2; 10,905,226 B2; 10,281,240 B2; and other U.S. and foreign patents pending.

LASERFRAME

PLATFORMS

Strandhögg™ v3

• 6/12 laser cut platform

• Tubes Rapid-Release Technology

• Internal zipper admin pocket

• Top loop placard front and back

• Bottom loop placard front only

• Instant Access Back Panel

• Comfort padding

• Built-in ventilation channel

The Strandhögg v3 Plate Carrier maximizes 6/12 technology and rapid closure systems provided by the Tubes fasteners for easy donning and doffing. The redesigned front panel has an internal zippered admin pocket along with a 4"x9" loop field for identifiers. Along the bottom of the front panel is a second loop field which has been added to facilitate use with the all new FirstSpear Admin Placard and Magazine Pocket Placard found on page 47.

The newly designed Instant Access Back Panel allows for easier access to adjust your cummerbund. Both the front and back of the carrier features interior facing channels for foam to add comfort and ventilation. These foam inserts can be removed for a more streamlined carrier. The front and back have the ability to hold both soft armor and plates that are the same size and cut of the carrier.

v3 Front Panel (S-XL)

MSRP: $201.31 Part #:12-00412

Instant Access Back Panel (S-XL)

MSRP: $255.68 Part #:12-00411

Overlap Cummerbund (S-3XL)

MSRP: $199.00 Part #:15-00381

Features

Strandhögg™ v2

• 6/12 laser cut platform

• Tubes Rapid-Release Technology

• Top loop placard front and back

• Instant Access Back Panel

• Comfort padding

• Built-in ventilation channel

Maximizing the lightweight 6/12 technology and rapid closure systems provided by the Tubes fasteners, the Strandhögg Plate Carrier can be rapidly donned or doffed. Using a streamlined fit throughout, along with state of the art materials and production technology, the Strandhögg is easily tailored for comfort, ventilation, and fit. Both the front and back of the carrier feature interior facing channels for foam to add comfort and ventilation. These foam inserts can be removed for a more streamlined carrier. The front and back have the capability of holding both soft armor and plates that are the same cut size of the carrier. The front and back both feature a sewn 4"x9" top loop placard for identifiers.

The newly designed Instant Access Back Panel allows for easier access to adjust your cummerbund. Both the front and back of the carrier features interior facing channels for foam to add comfort and ventilation. These foam inserts can be removed for a more streamlined carrier. The front and back have the ability to hold both soft armor and plates that are the same size and cut of the carrier.

v2 Front (S-XL)

MSRP: $160.99 Part #:12-00408

Back Panel (S-XL)

MSRP: $255.68 Part #:12-00411

Overlap Cummerbund (S-3XL) MSRP: $199.00 Part #:15-00381

• SPEAR/BALCS armor cut

• Internal belly band (removable)

• 4”x 9” Loop field on front and back panels

• Instant Access Back Panel

The Siege-R Optimized includes standard, fully-adjustable shoulder pads, two sets of Tubes fasteners in the front and back for rapid switch-out to the enhanced M.A.S.S. Shoulder System. The front and back plate pockets are internal to the vest, making the system slimmer and better suited for confined spaces.

The internal belly band is now removable for those who do not wish to use it all the time. The exterior cummerbund is enhanced in the back with FirstSpear high-performance elastic webbing. Finally, our quick drying airflow mesh is utilized on the interior to reduce overall weight and shed water quickly. It’s optimized for all missions and conditions!

Front Panel (S-XL)

MSRP: $236.19 Part #:12-00185

Back Panel (S-XL)

MSRP: $ 281.40 Part #:12-00354

Overlap Cummerbund (S-3XL)

MSRP: $199.00 Part #:15-00381

Shoulder Straps

MSRP: $ 116.53 Part #:15-00300

Features

Modular Armor Supplement System (M.A.S.S™)

• Multiple ballistic protection levels available

• Compatible with Siege-R and Strandhögg

• Run as a system or individual components

The Modular Armor Supplement System, M.A.S.S. offers armor augmentation that is easy to employ, completely ballistic integrated, and a significant comfort upgrade. Does not affect Tubes quick release function and offers increased armor protection.

The M.A.S.S. is an excellent alternative to traditional, less thought out systems. When additional armor is necessary, it is time to get all you can functionally employ. M.A.S.S. is available to provide additional protection to the neck/throat region, shoulders, and upper arms. Components attach to a vest and are sold separately.

Collar

MSRP: $ 52.54

Part #: 15-00069

Throat Guard MSRP: $ 45.44

Part #: 05-00073

Shoulder Pads MSRP: $ 98.01

Part #: 15-00392

Shoulder Straps MSRP: $ 49.13

Part #: 15-00359

Bicep

MSRP: $ 128.19

Part #: 15-00071

Groin Protector 6/12 MSRP: $ 76.12

Part #: 15-00110

Shown with Siege-R Optimized (sold separately)

• External carrier for soft body armor

• Zippered pocket to insert armor

• Internal cummerbund for support

• 3”x7” Front loop placard

• 2”x7” Back loop placard

An advanced modular external carrier for your issued concealable soft body armor. The Crime Suppression Vest CSV, features FirstSpear Tube closures on the cummerbund and FirstSpear 6/12 technology throughout the system, allowing you to scale the platform to meet the mission profile from patrol to plainclothes crime operations. The CSV also features an internal cummerbund to provide additional support and stability.

Front Panel/Shoulders (S-5XL)

MSRP: $126.98 Part #: 12-00371

Back Panel (S-5XL)

MSRP: $176.95 Part #: 12-00370

Overlap Cummerbund (S-3XL) MSRP: $199.00 Part #: 15-00381

Shoulder Pads (optional) MSRP: $64.52 Part #: 15-00068

Non-Official Cover™

• Concealable, slim design

• Side panel system eliminates ballistic gaps

• Moisture-wicking anti-microbial fabric

The Non-Official Cover NOC is the first concealable vest system that provides true flexibility and superior comfort, allowing the wearer to tailor his or her protective equipment to a specific assignment or situation. This capability, when used in conjunction with a FirstSpear Slick or First On, gives the FirstSpear Professional User the ability to easily adjust his or her individual ballistic protection level. With a slim fit and unique style lines the NOC has a simplified sizing scheme that eliminates all the previous sizing and sustainment challenges formerly found in traditional concealable soft armor carriers.

Contact FirstSpear for pricing, sizing, and availability.

Deceptor™

• Concealable vest system

• Compatible with Ragnar pockets

• Designed for low profile SAPI plates

Designed to conceal rifle velocity protective plates in high threat environments, the Deceptor will discretely hold a pair of special threat plates and two, 6"x6" Rifle Side Plates. Pockets from the Ragnar Series can be quickly attached to the front or the back of the carrier as well. The Deceptor shines with SAPI cut plates in the 2.2 to 4.5 pound medium-sized weight range which are .25 inches or thinner. For larger, thicker, or heavier plates, consider another carrier system. This carrier comes with stretch and non-stretch shoulder straps to accommodate user comfort preference.

• Lightweight minimalist carrier

• Holds "Swimmer" or SAPI ballistic plates

Designed for wear underneath garments or Load Carriage Platforms, the Slick is light and comfortable. The soft material can be folded up and stashed in your cargo pocket when not needed. Cut to fit either “Swimmer” or SPEAR ballistic plates, this is a minimalist carrier and not designed to be an outermost carrier for Tactical Operations. The fabric is a Tweave Durastretch 520E, resulting in four-way stretch for maximum comfort.

Swimmer (S-XL)

MSRP: $119.87 Part #:12-00073

SAPI (M/L) MSRP: $119.87 Part #:12-00076

Features Swimmer SAPI

•

Tubes X Strap

Integrates with Plate Carriers front

• Tubes technology

Some mission sets call for unique approaches to load carriage. Some of our Users at the Tip of the Spear need compatibility with a Free Fall Harness, others are spending a lot of time in an Armored Seat and still others are carrying a back plate in a Pack that they cannot take off or risk mission compromise. Designed to work with either the FS AAC family of plate carriers or Strandhögg this harness quickly Tubes into place and allows you to work with the front of your plate carrier in place without a back panel or cummerbund. The X Strap system has enough adjustment to go on over the top of a Soft Armor Carrier or Cold Weather Clothing. A small amount of stretch is provided on each side and the Back Panel provides for attachment of FS Cell Tags. This Harness in conjunction with a Front Panel is optimized for use with the FS AR, NBBP or UC Plates. Hard armor that is heavier than those designs may not carry well.

Assaulter Armor Carrier v2

• Instant Adjust Back Panel

• Padded 6/12 side wings

• Low profile

• Adaptive cummerbund

Purpose built for Direct Action user roles, the Assaulter Armor Carrier (AAC) v2 utilizes the latest in FirstSpear Technology to keep weight to an absolute minimum while maintaining true mission flexibility. The AAC is the lightest plate carrier and has the lowest profile. It has minimal padding on the shoulder straps which helps keep you streamlined. It is cut to fit either “Swimmer” or ESAPI/SPEAR cut ballistic plates, backed with an unpadded water-resistant nylon mesh. Designed to quickly shed water and aid in the transition from over the beach to over the hills.

The newest version adds padded 6/12 wings to the front of the carrier for comfort and attaching a variety of pockets such as radio and magazines. The upgraded Instant Adjust Back Panel allows the user to have cummerbund Tubes on the front and back to easily switch from adaptive land cummerbunds to maritime cummerbunds. For a lower profile non ballistic cummerbund the 2" Belly Band can be used.

This carrier can be configured with BC inserts, soft armor ballistic inserts, and hard armor ballistic inserts.

Front Panel (S-XL) MSRP: $273.66 Part #: 12-00289

Instant Adjust Back Panel (S-XL) MSRP: $239.28 Part #: 12-00242

Adaptive Cummerbund (S-3XL) MSRP: $215.85 Part #: 15-00445

Shoulder Straps (S-XL) MSRP: $64.94 Part #:15-00206

Shoulder Sleeves MSRP: $32.24 Part #:15-00178

2” Belly Band

Assaulter Armor Carrier v1

• Lightest of all plate carriers

• Low profile

• Front panel integrated pockets

• Direct action armor system

Purpose built for Direct Action user roles, the Assaulter Armor Carrier (AAC) utilizes the latest in FirstSpear Technology to keep weight to an absolute minimum while maintaining true mission flexibility. The AAC is the lightest plate carrier and has the lowest profile. It has minimal padding on the shoulder straps which helps keep you streamlined. It is cut to fit either “Swimmer” or ESAPI/SPEAR cut ballistic plates, backed with an unpadded water-resistant nylon mesh. Designed to quickly shed water and aid in the transition from over the beach to over the hills.

This carrier can be configured with the CTFSS cummerbund, BC Inserts and soft armor ballistic inserts (to support in conjunction ballistic hard plates) as required. The AAC standard cummerbund will accept side plates and soft armor inserts. Both wings of the AAC Plate Carrier’s front panel have pockets with adjustable tie downs which can hold radios similar to the size and shape of the AN/PRC-148 (MBITR) or AN/PRC-152 (MBHH) and can even be adjusted to fit the 60 Round Surefire M4 Magazine. The AAC utilizes the latest in FirstSpear technologies including the 6/12 pocket attachment system and Tubes technology. This is a state of the art capability designed to support all types of operations.

Front Panel (S-XL)

MSRP: $179.33 Part #: 12-00065

Back Panel (S-XL) MSRP: $135.45 Part #: 12-00080

Overlap Cummerbund (S-3XL) MSRP: $199.00 Part #: 15-00381

2” Bellyband MSRP: $33.60 Part #:15-00163

Shoulder Straps (S-XL) MSRP: $64.94 Part #:15-00206

Shoulder Sleeves MSRP: $32.24 Part #:15-00178

AAC Frog Kit

• ANU certified

• Compatible with Rebreather Harness Kit (sold separately)

• Configurable for sub-surface infiltration

• Buoyancy compensators

• Flotation and land cummerbund included

Evolving the transition from Land to Maritime Operations even further, FirstSpear introduces the Assaulter Armor Carrier Frog Kit. This system configures quickly for the full spectrum of operational environments. Utilizing the AAC Instant Adjust Back Panel and Adaptive Cummerbunds the Frog Kit allows for individual customization. Tubes technology in the Instant Adjust Back can be preset for different sizing requirements, changing according to your mission set. FirstSpear Tubes fasteners allow for quick donning and doffing along with the ability to change cummerbunds rapidly. 6/12 Modular Sections on the front panel, back panel, and cummerbunds allow installation of FirstSpear Modular Pockets based on an individuals preferences.

The AAC Frog Kit can be utilized with the separately purchased Rebreather Harness Kit and configured for sub-surface infiltration.

•

•

•

•

Government

Overlap Flotation Cummerbund

Adaptive Flotation Cummerbund

Rigid Cummerbund

• Rapid donning and doffing

• Low profile

• Interior loop attachment field (compatible with Tubes attachment accessory)

• 2” Tubes compatible with all Tube sizes

Designed to work with FirstSpear Instant Access Back Panel. The Rigid Cummerbund utilizes 2” Tubes for fast donning and doffing. On the exterior of the cummerbund, a field of 6/12 allows for easy pocket attachment. On the interior of the cummerbund is a loop field allowing attachment of FirstSpear’s popular Ragnar line of pockets.

Overlap Cummerbund

(S-2XL)

MSRP: $143.98 Part #: 15-01241

• Provides additional coverage where Tubes fasteners connect

• Allows for Ragnar pocket attachment on the inside and Tubes attachment accessory

• Integrates with a number of FirstSpear carriers

• Accepts 6”x6”/6”x8” side plates

Responding to a specific request from a FirstSpear professional user at the tip of the spear, the Overlap Cummerbund has been designed and engineered to provide additional overlapping soft armor at the front side of the plate carrier where the Tubes technology closure system meets. The additional soft armor tucks in behind the Tubes fasteners, allowing full opening and closing of the vest. The body side of the Cummerbund has been modified to allow the attachment of Ragnar pockets so that magazines and other items can be held close to the body making for an even more streamlined silhouette. This feature is particularly attractive for users trying to carry more magazines than traditional front-loading will allow.

(S-2XL)

MSRP: $199.00 Part #: 15-00381 Features

Cummerbund

Retro-Fit Cummerbund

• Compatible with hook and loop flap carriers with back channel

• Accepts soft armor inserts

• Tubes Attachment Accessory Compatible

• Accepts 6”x6”/6”x8” side plates

The Retro-Fit Cummerbund takes advantage of FirstSpear’s revolutionary 6/12 & Tubes Technology without changing your entire load carriage platform. This kit is compatible with carriers which utilize traditional hook and loop flap systems and rear MOLLE or cummerbund pass-through channel. It accepts soft armor inserts and 6”x6” hard plates.

Adaptive Cummerbund

(S-2XL)

MSRP: $249.86 Part #: 90-00003

Features

• Works with AAC v2

• Quickly swap cummerbunds

• Adjust your back insert one time

• Designed for soft armor inserts (land cummerbund)

• Accepts 6”x6”/6”x8” side plates

The Adaptive Cummerbund provides the flexibility to change with it. It allows you to quickly swap between land and maritime cummerbunds without the hassle of hook and loop. In order to attach this cummerbund, you must use the attachment panel or the Instant Adjust Back Panel to give you a place to connect the Tubes fasteners. This cummerbund allows you to adjust your back insert for where you want your Tubes fasteners placed and how tight you want your carrier only one time, rather than having to re-adjust when switching between land and maritime. Now you can switch from land to flotation cummerbunds as fast as you can release a Tube fasteners! See page 29 for Adaptive Flotation Cummerbund

Land (S-2XL)

MSRP: $215.85 Part #: 15-00445

Flotation (S-2XL) MSRP: $1,297.71 Part #: 15-00479

•

•

•

Integrating some of the most desirable features for Tropical Warfare Operations into a load carriage platform FirstSpear has teamed with professional users to bring you the JOKER. Utilizing the best in lightweight resilient materials and advanced construction techniques the JOKER works well with the MIKE Force Pack (MFP) to give freedom of movement and comfort. The JOKER will accept the FS SSV In-the-Belt Holster on either the left or right side as well as accessory pockets from the Ragnar Line in the inside front pockets. Advanced foam integration not only provides comfort for the wearer while transporting a fire load but also provides neutral buoyancy to help offset the load during a water crossing.

Viking Patrol Harness

• 6/12 side panels

• 3 magazine pockets

• Radio pouch

• Arctic canteen pocket included

• General purpose pocket with pistol pockets

The VPH features 3 fixed full flapped magazine pockets each capable of holding one or two 30-round 5.56 magazines and a fixed radio pouch that holds radios of similar size to the AN/PRC-148 MBITR. Modular 6/12 Panels on each side will accept the complete line of FirstSpear pockets as well as any older pockets using a MOLLE style PALS compatible attachment system.

The Viking Patrol Harness comes with an arctic canteen pocket and a cold weather general purpose pocket with 2 external pistol magazine pockets. The VPH has longer than usual shoulder and back straps to secure it over multiple layers of clothing and is available in the ATACS ATX pattern. All materials and hardware for this harness are Mil-Spec or better and are resistant to Infrared Visual Augmentation Systems.

LaserFrame pockets are covered by one or more of the following patents: US 10,888,150 B2; US 9,565,922 B2; US 9,974,379 B2; US 10,905,226 B2; US 10,281,240 B2; and other U.S. and foreign patents pending.

FirstSpear’s patented LaserFrame hemless construction method allows all the pockets in the LaserFrame line to remain extremely lightweight while not sacrificing utility or durability.

FirstSpear’s patented construction method for LaserFrame pockets combines precision laser fusion, stitch line placement, and laminated material selections into a pocket that is both structurally rigid yet collapsible. Reducing the amount of material used in the construction of LaserFrame pockets allows us to cut unnecessary weight and bulk, resulting in a more streamlined overall system for the user. LaserFrame pockets use our patented 6/9 attachment system which also works with our patented 6/12 Laser Fusion and legacy MOLLE platforms.

LASERFRAME TECHNOLOGY BUILT FOR

•

•

•

•

•

•

•

•

•

•

•

•

Tourniquet Not Included

Tourniquet Not Included

Medium GP Pocket v2

• Structured Pocket made with Squadron material

• Elastic Daisy Chain on both sides of the pocket’s interior

• (2) Dummy Cord Attachment tabs on the pocket’s interior

6/9 | MOLLE MSRP: $66.98 Part #: 10-01115

• (2) 12” Shock Cord with (2) Barrel Locks provided for TQ attachment

• Belt Attachment

Large GP Pocket

• Structured Pocket made with Squadron material

• Mesh pocket on the pocket’s interior

• (2) Dummy Cord Attachment tabs on the pocket’s interior

• (2) 12” Shock Cord with (2) Barrel Locks provided for TQ attachment

6/9 | MOLLE MSRP: $80.98 Part #: 10-01113

Long GP Pocket

• Structured Pocket made with Squadron material

• Exterior zippered pocket

• 9 1/2” Loop on Exterior zippered pocket

• Elastic Daisy Chain on user side of the pocket’s interior

• (2) Dummy Cord Attachment tabs on the pocket’s interior

6/9 | MOLLE MSRP: $99.38 Part #: 10-01114

• (2) 12” Shock Cord with (2) Barrel Locks provided for TQ attachment

Divided

• Structured Pocket made with Squadron material

Stash Pocket v2 6/9 | MOLLE MSRP: $82.58 Part #: 10-01099

• 4 3/4” Loop on exterior of the pocket for the IFF/Cell Tag

• (2) Internal open divided pockets on both sides of the pocket’s interior

• (2) Dummy Cord Attachment tabs on the pocket’s interior

• (2) 12” Shock Cord with (2) Barrel Locks provided for TQ attachment

•

•

•

MultiMag Rapid-Adjust™ Pocket

• Precise adjustable retention

• Holds a wide range of magazines

• Integrates the Boa® Fit System

• Weighs just over 2 oz

The MultiMag Rapid-Adjust Pocket features patented adjustment and retention hardware. The operator can quickly adjust their pocket to fit a wide range of firearm magazines and other similar sized items.

The MultiMag Rapid-Adjust Pocket is designed to run right out of the box with no inserts required. The Boa® System allows for precise micro-adjustability of the pocket to fit any size magazine you may need.

MOLLE MSRP: $61.04 Part #: 10-00707

6/9

Admin Placard and Magazine Pocket Placard with Triple M4 insert and Molded Speed Tabs Show with Strandhögg v3 Sold Separately Page 16

Admin Placard Magazine Pocket Placard

Admin Placard

• Hooked back

• Spacious storage

• Loop front

MSRP: $49.98

Part #: 10-01065

• Can integrate with Magazine Pocket Placard

The Admin Placard is designed to work with Strandhögg v3 (page 16) as well as the FS Magazine Placard. A dual zipper opening provides a versatile small to hold smaller items.

Dimensions: 9”x6”x¾”

Magazine Pocket Placard

• Hooked Backed

• Wear alone or with Admin Placard

The Magazine Pocket Placard is made from 6/12 material that allows it to integrate the FS M4 insert. Built with hook field on the back panel means it can integrate with both the Strandhögg v3 and the Admin Placard.

MSRP: $53.76

Part #: 15-01251

Features

Triple M4 Insert

• Holds three M4 Magazines

The Triple M4 Insert securely holds three M4 magazines and integrates into the FirstSpear Magazine Pocket Placard. Made of elastic for retention with added loops for the FirstSpear Molded Speed Tab Kit (sold separate) for extra retention. Works with all M4 magazines.

MSRP: $29.98

Part #: 15-01252

Molded Speed Tab Kit

Set of 2 (Optional)

MSRP: $5.29

#: 15-00817

Magazine Pocket Placard M4 Insert with Molded Speed Tabs (optional)

Tubes

•

•

•

•

•

•

Tubes Attachment Accessory

•

•

The FirstSpear Tubes Attachment Accessory revolutionizes pocket attachment. The hook backed Tube Attachment Accessory allows a 4” Male Tube to be placed in multiple locations, allowing attachment of any FirstSpear pouch with Tubes attachment.

MSRP: $19.98

Part #: 15-01202

Tubes Belt Mount Accessory

•

• 2"x4"

The FirstSpear Belt Mount Tubes Accessory provides a modular option for Tubes Compatible pockets and pouches. Designed with a rear hook and loop closure system that secures the Belt Mount in place. It will work on belts that are up to 2" in width.

MSRP: $25.98

Part #: 15-01243

Carbine, Single MSRP: $36.98

Part #: 10-00725

Carbine, Double MSRP: $65.16

Part #: 10-00724

Carbine, Triple MSRP: $97.22

Part #: 10-00493

7.62X51

Pistol

Part #: 10-00494

Radio Pocket

Available for PRC-148 and PRC-152 MSRP: $57.91

Part #: 10-00530

Patrol

CSM Drop Pouch

• Double lined

• Formed opening

• Drawstring closure

• Approx. 11” by 10”

• Belt Mounted

Weight: 0.465 lbs. MSRP: $71.92 Part #: 10-00001

A simple solution for magazine retention, loading on the go, transporting loose shotgun rounds, or as a carrying bag for your NVGs. Double lined and a formed opening for easy reaching and dropping. Complete with a drawstring closure to keep items secure.

Admin Pocket

• Loop front

• 2 divided back pockets

• Side pocket

• Simple storage

The Admin pocket has a loop front for attaching IFF or other insignias. Two divided pockets in the back allow storage for your ID, Status Cards, etc. The pocket on the side can hold a hand-held flashlight, spare pistol magazine or multi-tool/ folding knife.

6/12

Weight: 0.105 lbs. MSRP: $60.58 Part #: 10-00117

6/9 | MOLLE Weight: 0.155 lbs. MSRP: $60.58 Part #: 10-00257

Mini Admin Pocket

• Designed for Maritime plate carriers

• Works with other plate carriers as well

• Loop on the front of the pocket

The popular FirstSpear Admin pocket has been adjusted to fit and work with the newer Amphibian and Maritime armor carriers. This pocket works great on previously designed armor carriers as well. It comes in 6/9 and 6/12 attachment options. There is also loop field on the front for cell tags, patches, or anything else you may want to attach.

6/12

Weight: 0.105 lbs. MSRP: $35.07 Part #: 10-00401

6/9 | MOLLE Weight: 0.155 lbs. MSRP: $35.07 Part #: 10-00418

Grid Reference Guide Organizer Pocket

• Holds status cards, photos, and key data

• Elastic webbing keepers

• Stretch pocket

• Hook and loop flap for patches

The FS Grid Reference Guide (GRG) Organizer Pocket is a handy tool for utilizing status cards, target photos, or other key data needed in hard copy. Military-Spec elastic webbing keepers can hold pens, wax pencils, and more. A small stretch pocket will hold items roughly the size of a battle dressing. Items are secured by an integrated hook & loop flap with a loop exterior field for attachment of patches. The clear area inside the GRG Organizer can be marked on with alcohol pens, wax pencil, and more.

6/12

Weight: 0.180 lbs. MSRP: $73.46 Part #: 10-00600

6/9 | MOLLE Weight: 0.190 lbs. MSRP: $73.46 Part #: 10-00306

Cuff Pouch

•

•

•

•

•

•

•

The

6/9 | MOLLE Weight: 0.395 lbs. MSRP: $92.56 Part #: 10-00516

Hydration Pouch and Bladder

• Extremely lightweight

• Streamlined

• Holds a 3 Liter hydration bladder

• 6/12 material on front

The Hydration pouch is an extremely lightweight carrier for your Hydrapak™. It is streamlined and purpose built to hold a 3 Liter hydration bladder.

3L (100 oz) - 14.5"x8" 6/12 Weight: 0.36 lbs. MSRP: $96.57 Part #: 10-00296

6/9 | MOLLE Weight: 0.37 lbs. MSRP: $96.57 Part #: 10-00473

Hydration Bladder

Hydrapak 3L MSRP: $49.78 Part # 19-00006

Responder Pack

• Full zippered top and sides

• Fixed padded shoulder w/adjustable straps

• Oversized carry handles

• Silver reflective external tape

• Fully customizable main compartment

• Rigid Divider w/full loop field

• Tear out clear window pockets

• Re-enforced hypalon Bottom

MSRP: $624.98

Part #: 90-00158 Dimensions 17"x11"x6"

Kit Includes

7- Large Clear Window Pockets 6"x11"x2.5"

1- Medium Clear Window Pocket 3.5"x7.5"x2"

1- 1"x8" Retention Strap

1- Elastic Retention Accessory

1- Divider Board w/Full Loop Field

Specifically designed for first responders that require the best option for a customizable emergency equipment pack. The Responder Pack boasts fixed padded shoulders, full external zipper for suitcase style access and a large front 6/12 (Laser Cut) loop field for pocket/accessory expansion. The large main compartment offers a rigid “Center Divider Loop Board” for organizing its large and medium clear-window “Tear-Out” pockets.

Large Clear Window Pocket MSRP: $38.52

Part #: 10-00691

Hydration Bladder

Medical Supplies Not Included

Medical Trauma Assault Pack

• Large zippered pocket

• Bungee attachment points

• 3 tear out pockets

• Easily accessed grab handle

Medical Supplies Not Included

MSRP: $401.92

Part #: 11-00080

Dimensions 19”x12”x3”

Weight: 2.34 lbs.

The MTAP, Thin Profile was designed with input and expertise from one of the finest medical products providers in the US and supports a large variety of tactical profiles for the different means and aspects of tactical infiltration and exfiltration from the modern battlefield. A large zippered pocket allows access from within or outside the pack, bungee attachment points will secure odd sized items, and three “tear out” pockets can be tossed to assist personnel facilitating a multi-casualty scenario. An easily accessed grab handle will allow the pack to be hung in vehicles or airframes.

Ranger Med Pouch

• Completely removable

• Adjustable securing system

• Stretch hook closure

• Hook and loop for cell tags or patches

• IFAK Med Thong included

Completely removable from its carrying component, the Ranger Med Pouch holds essential medical components for self-aid. The securing system has multiple adjustment points to compensate for additional items or components that were removed. Stretch hook closure will maintain security through parachute and fastrope operations etc. A hook and loop attachment point on the insert allows for indication patch or IFF. This pouch comes with the Improved IFAK Med Thong and comes in 6/9 attachment style. You can read more about this pouch at Soldier Systems.

6/9 | MOLLE

Pouch

MSRP: $104.15

Part #: 10-00540

Thong MSRP: $81.23 Part #: 10-00585

Dimensions 5.5” x 7.25” x 3.5”

•

Tourniquet Pouch

•

•

• Secures medical supplies

6/9 | MOLLE

Weight: 0.12 lbs. MSRP: $50.18 Part #: 10-00415

The FirstSpear Tourniquet Pouch is designed to securely hold one CAT or TQs Style tourniquet, or similar sized medical supplies. With a highly visible red release tab, the pouch opens quickly to FirstSpear 6/9 attachment system this pouch can be attached to all 6/12™ platforms and also compatible with older MOLLE systems. Additionally, it can be directly attached to FirstSpear’s line of belts including the Assaulter’s Gun Belt (AGB) and Line One Belt.

Rapid Access Pocket Pressure Dressing

• Quick Access

• Compact design when folded

• Spacious pouch when opened

• 330 Denier Nylon

6/9 | MOLLE Weight: 0.15 lbs. MSRP: $42.15 Part #: 10-00748

With a wide range of adjustment options, this pocket will accommodate a number of pressure dressings, trauma bandages, or similarly sized medical supplies. There is a slit for your pen and an easy to grip flap which allows you to quickly open the pocket. It secures with 6/9 attachment style and has two different snap positions to help keep your load as streamlined as possible.

Medical

Ergonomic Canine Vest

• Enhanced mobility & performance

• Drastic weight reduction

• Smarter weight distribution

• Reduce fatigue

• Improved comfort

The K2-FirstSpear Ergonomic Canine Vest was designed by K2 Solutions military working dog veterinarian to allow for uninhibited stride and shoulder movement. By reducing weight, constriction, and pressure points, the sleek, breathable and lightweight vest moves naturally with your canine to effectively distribute equipment weight during patrol. This allows your working canine to perform their duties more efficiently during extended patrols, optimizing performance.

MSRP: $299.93 add $11 for MultiCam Part #: 12-00001 Weight: .975 lbs

40 LBS - 70 LBS

Sizing Guide

Girth Sizes Min - Max

Front strap: 22.5" - 37"

Rear strap: 23.5" - 38"

SSV™ OWB

Pistol Holster

• Outside the Waistband Holster

• Compatible with most handguns

• Available for handguns with lights

• Exterior face helps mask visual and near infrared signature

MSRP: $106.45-$118.27

Rather than just another molded pistol holster, FirstSpear wanted to give our armed professionals a complementary capability to their sidearm.

Featuring adjustable tension, customizable secondary retention and utilizing subdued corrosion-resistant hardware, the SSV pistol holder is one you’ll never want to leave home without.

SSV™IWB Holster

• Inside the Waistband Holster

• Compatible with most handguns

• Available for handguns with lights

• Versatile

• Low Profile

• Lanyard Attachment for added stability

• Easy to use molded J Hook

MSRP: $106.45-$118.27

Continuing development of the SSV Holster Line, FirstSpear has been hard at work to bring you a deeper concealment holster with the versatility that EDC requires.

SSV™ Pistol Magazine

Pocket

• Ambidextrous

• Holds single pistol magazine

• Molded J hook

• Rounder taper corners for comfort

• Beveled top for easy magazine removal

• Backup dummy cord (removable)

• Worn inside or outside belt

MSRP: $78.06

SSV™ Belt Mounted Pocket

• Belt mounted

• Securely holds two pistol magazines

• Molded pocket

• Durable finish

The SSV In-the-Belt Pistol Magazine Pocket exemplifies the same level of craftsmanship and attention to detail found throughout the FirstSpear SSV Product Line. It is a great addition for those who carry every day and want an unobtrusive way to carry a reload.

This belt-mounted pocket is a great way to securely hold 2 Magazines. To attach the molded magazine simply thread your belt through the belt loops on the back of the magazine. It is available in all standard finishes in the SSV product line.

Double Pistol MSRP: $88.70

Rifle + Pistol MSRP: $118.27

Double Rifle MSRP: $118.27

Vertical Entry Belt and Unpadded Assault Sleeve

• High functioning Battle Belt

• Quickly removable 6/12 Modular Over-Flap

• Minimalistic bulk and weight

• Integrates with Vertical Entry Harness

• SOCOM Retention Standard NFPA Tested*

The Vertical Entry Belt is engineered to incorporate specialized retention functions in conjunction with the elements needed to be a Tactically Capable Battle Belt. This Belt System features a removable 6/12 Modular Over-flap that can accept the full range of 6/12, 6/9, or MOLLE style pockets. Unpadded, minimalistic in bulk as well as weight, along with exposed Hook eliminates the need for Suspenders when used with the Base Belt. Additionally it can integrate into the Vertical Entry Harness (restricted) for a fully evolved fighting system capable of supporting operations in vertical environments.

*Independently Third Party Tested with FS Multi Point Lanyard to meet standard with & without the Vertical Entry Harness.

Vertical Entry Belt MSRP: $124.64 Part # 15-01033

Sizing Guide

Small 28-32”

Unpadded Assault Sleeve MSRP: $60.13 Part # 15-00937

Sizes: S/M, M/L, L/XL

Sizing Guide S/M 31.5” M/L 33” L/XL 34.5”

Compatible with:

Vertical Entry Harness

• Integrates with Vertical Entry Belt

• Cobra Buckles for leg loops

• Donned in seconds

• Reinforced and stiffened tie in point

• Includes Kernmantle leader and pile tab sleeves

• Exceeds Modified NFPA 1983-2012*

The FS Vertical Entry Harness (FS-VEH) has features specific for Assault Climbers working in Urban Combat, the leg loops close with rated Cobra Buckles so that they can be stashed into the inter-grated front compression pocket when high mobility is required but can be donned in seconds without removing the harness. The VEH Interface Sleeve Slides onto the waist section of the VEH providing solid interface and attachment to the hook portion on the body side of the Vertical Entry Belt. The FS-VEH, Vertical Entry Belt and Multi Point Lanyard have been tested together to function to the standards mandated for Modified NFPA 1983-2012 as called for by US SOCOM.

*Independently tested to meet Modified NFPA 1983-2012 as used by US SOCOM both with and without the Vertical Entry Belt.

Assaulter’s Gun Belt

• Integrates with the AGB Padded Sleeve

• Accommodates multiple FS components

• Completely removable buckle

The Assaulter’s Gun Belt (AGB) is a versatile belt designed to handle tough situations. Accessed through a two-point, high strength metallic buckle, the AGB will facilitate combat-equipped buddy drags. It can integrate with the AGB Padded Sleeve to provide more comfort and provide you with additional 6/12 attachment points. The buckle is completely removable from the belt for routing through smaller pant belt loops.

Base Belt

MSRP: $104.28

Part #: 15-00004

Sizing Guide

Small 28-32"

Medium 32-36" Large 36-40" X-Large 40-44"

2X-Large 44-48"

Compatible with: Padded AGB Sleeve and V-Ring

• Low volume for everyday use

• Pliable webbing base

• Easy to use buckle

The FirstSpear Base Belt is a low volume belt intended for everyday use on trousers. It has a high nap pile exterior and a pliable webbing base. The Base Belt can be used with the Tac Belt and/or the 6/12 AGB Sleeve. Both securely attach to the Base Belt and provide a minimal movement platform by which you can scale tactical capability up or down.

MSRP: $40.32

Part # 15-00541

Sizing Guide Small 28-32" Medium 32-36" Large 36-40" X-Large 40-44"

Compatible with: Tac Belt, AGB with Padded Sleeve, and Modular AGB

Assaulter’s Gun Belt

Tac Belt

• Durable tactical belt

• Metal buckle

• Lanyard attachment points

• Strip of hook fabric

The Tac Belt is a durable tactical belt with a sturdy metal buckle. It can be used on its own or in conjunction with the Base Belt and/or the AGB 6/12 Sleeve. The Tac belt is less stiff than the Assaulter’s Gun Belt and has additional security loops. There is also a cover over a strip of hook faced material that when exposed can mate up to the Base Belt or AGB Sleeve to eliminate shift and sag. Additional points on the belt accommodate the integration of the Lanyard V-Ring.

Low Profile Padded AGB Sleeve

MSRP: $109.34 Part # 15-00542

Lanyard V-Ring MSRP: $26.14 Part # 15-00145

Sizing Guide Small 28-32" Medium 32-36" Large 36-40" X-Large 40-44"

Compatible with: Base Belt, Padded AGB Sleeve, and V-Ring

• Slimmer version of the AGB Padded Sleeve

• Attach a belt, holster, and pockets where desired

• Comfortable padding around the whole belt

• Moisture-wicking mesh along entire sleeve

A slimmer minimalist version of the popular Assaulter’s Gun Belt Padded Sleeve. The Low Profile sleeve provides a laser cut 6/12 field to be placed on a belt. This allows users the option to attach items directly on the belt or the 6/12 field. It is compatible with 6/9, or MOLLE style pockets. There is also comfort padding with moisture-wicking mesh along its whole length.

MSRP: $139.20 Part #: 15-00267

Sizing Guide Overall Length Small 31.75" Medium 34.75" Large 37.75" X-Large 40.75"

Compatible with: Tac Belt, AGB, and Modular AGB

Tac Belt

Low Profile Padded AGB Sleeve Belt Not Included

PACKS | BAGS

ACCESSORIES

•

Exigent

• Attaches to different platforms

• Exterior flap with shock cord

• Pocket inside exterior flap

As a true Assault Pack, the Exigent Circumstance Pack can quickly and cleanly attach to different platforms or be used by itself. It can be carried like a backpack or as a single strap bag which keeps your shoulder pocket clear for the stock of your weapon. The exterior flap is secured with shock cord and provides enough space to hold a helmet or other accessories. The flap can also be completely removed. The pocket inside the exterior flap will fit a protective mask and features an elastic daisy chain sized to hold flash-bang and smoke grenades. The rear-most pocket can hold a comfort pad (included), a 3-liter hydration bladder, or optional internal frame. The ECP is designed to support your next “No knock, No warning” entry mission!

Comm Pack

• Discrete backpack

• Internal laptop sleeve

• 2 Sizes: 980 cu in or 1800 cu in

The Comm Pack shares many of the same features as the FirstSpear Exigent Circumstance Pack (ECP). It has a distinctly urban appearance giving a low-visibility style. Extra large padded shoulder straps feature quick disconnect buckles. Inside the pack is a compartment designed for laptops and an internal zippered pocket. Numerous compartments with individual zipper access and external mesh side pouches make for a highly useful pack. For surveillance or any other type of operations, the Comm Pack has your back!

Medium MSRP: $206.32 Part #: 11-00013

Large MSRP :$268.83 Part #: 11-00092

Skirmisher Firearms Training Bag

• Fits 1 AR style take-down rifle

• Holds 3 full sized handguns

• Magazine attachment straps

• Spacious pockets for accessories

• Multiple carrying styles

MSRP: $424.81

Part #: 11-00027

Dimensions: 25” X 13” X 10”

The Skirmisher Firearms Training Bag facilitates transportation and organization of firearms, ammunition and accessories. Discreet and smartly arranged, this system can hold up to 3 full-sized handguns with or without lights in protected pockets. It will also fit 1 AR style take-down rifle which can be secured with an included retention strap. There is also room for associated training gear such as ear/eye pro, magazines, boxed ammunition, and a top center bin for loose “top up” ammunition. The Skirmisher also comes with 4 magazine attachment straps to contain magazines. The bag can be transported backpack style, single strap style or carried from a continuous-length webbing handle. Padded in all key areas to protect lights, lasers, and optics, the Skirmisher takes maximum advantage of design and material to provide you with a total training enhancement.

Discreet Backpack

• Fits short rifles, sub-guns, and shotguns

• Soft appearance

• Adjustable straps

• Multiple pockets

MSRP: $268.82

Part #:11-00001

Dimensions: 28¼” x 13 ¼” x 5”

The Discreet Rifle Pack carries short-barreled rifles, sub-guns, and shotguns, along with associated accessories. The front straps are fully adjustable and come with a quick release buckle strap to secure the front straps together. There is also a small zippered pocket on the back for small accessories.

Vertical Envelopment Pack

• Top opening, rolled closure, Tubes secured

• Mounts on FirstSpear Plate Carriers

• Usable without Plate Carrier

• Flips over the head for quick access

• Unencumbered shoulder pocket

The Vertical Envelopment Pack (VEP) is a top opening, rolled closure, and Tubes fasteners secured assault pack that can be mounted on a FirstSpear Plate Carriers. The VEP can be flipped over the head for quick access to contents inside. The front hanging feature provides additional safety and comfort during infiltration when seated in armored vehicles and helicopters.

Streetwalker

MSRP: $407.09

Part #: 11-00108

Features

• Laser fused 6/12™ accessory panel

• Tubes quick-release shoulder strap

• Ventilated pocket

MSRP: $181.96 Part #:11-00194 Dimensions 12”x13”x22”

The all-new Streetwalker bag is constructed from a lightweight ripstop and 500D cordura nylon. Features a FirstSpear laser fused 6/12 accessory panel for attaching pockets on the interior or exterior of the pocket, furthermore, you can easily attach your cell tags or Ragnar pockets to outside of the pocket. On the other end of the bag is an extra-large ventilated pocket perfect for separating gym clothes, muddy boots, or anything else you need to keep separated.

Sherpa

• Versatile range / equipment / travel bag

• Two padded pistol pockets

• Large main compartment

• Removable interior organizer panels

• Loop interior for hook backed pockets

• Removable padded shoulder strap

• Discreet appearance

Designed in conjunction with FirstSpear professional users, this all-new bag is a hard use day bag that can be put to work across a wide variety of environments and situations. Whether you are going to the range, relaxing on the boat, or heading to a call out, this bag is the perfect size for those on the move. It comes standard with full 500D construction and premium hardware.

Interior organizer panels can be completely removed or re-arranged to fit new equipment.

Sherpa Bag

MSRP: $164.66 Part #: 11-00187 Dimensions 16”x9”x10”

Deluxe Sherpa Divider MSRP: $17.57 Part #: 15-00909

Duffel

• 2,000 CU IN

• Extra long carry straps

• 500D Nylon

MSRP: $56.85

Part #:11-00196 Dimensions 22”x 10”x11”

The FS duffel features a full 500D nylon construction with 3 inch webbing that folds over into the handle for an extremely light weight design that is still incredibly strong and balanced for heavy contents. Extra large zippered opening with premium zipper hardware and FS pull tab. The top has a sewn on webbing carry strap that works great when you need to hang the bag vertically. The inside is completely open with no pockets and around 2,000 cu in. 100% Berry compliant.

•

Summit Bags

• Multi-Purpose organizer bag

• Variety of sizes

• Different materials available

The Summit bags provide a great way to keep your gear organized inside larger packs or bags and work exceptionally well as a stuff sack for garments or gear. You can throw under your seat or keep it in the trunk. Available in several different sizes in a mesh, 70D ripstop, or high visibility orange packcloth.

Helmet Hut

• Padded for protection

• Internal pockets for organization

• Accommodates various sized helmets

• Retention strap secures your helmet

• Attachment points for carrying sling

The Helmet Hut is a storage and transportation system for your helmet. Padded for protection and with internal pockets for organization, the Helmet Hut easily accommodates various size helmets, night vision & communication systems. A retention strap secures your helmet in place. Space is also available for eye protection and IFF components. The bag has a handle and also attachment points for a carry sling.

MSRP: $201.15

Contractor Bag

• Lightweight

• Durable

• Removable frame

• Oversized zippered opening

The Contractor Bag is a spacious duffel styled bag with removable frame. The oversized zippered opening makes it easy to load and features secondary retention straps with quick release buckles. The frame is engineered to be lightweight and durable. It has 2 wheels which make the bag easy to maneuver. There are also reinforced handles in several key locations and external zippered pockets.

CAT Rifle Case

• Durable

• Adjustable dividers for organization

• Accepts 6/9, MOLLE, and Ragnar pockets

• Sized to fit 30” Short Barrel Carbines

MSRP: $339.86 Part #: 11-00153

The exterior pocket has two reinforced and movable dividers to help organize its contents. One wall accepts 6/9 and MOLLE style pockets and the opposite wall accepts pockets from the FirstSpear Ragnar line. The main pocket is sized to fit Short Barrel Carbines up to 30 inches. There are multiple reinforced attachment points for slings, identification tags and more. This bag is an excellent fit for SCAR-H & SCAR-L with the stock folded.

Padded Plate Backer

• Non-Ballistic

• 10x12 padded SAPI cut insert

• Extremely lightweight

• Includes two pads

MSRP: $29.56

Part #: 15-00936

The 10x12 Padded Plate Backer Kit adds increased comfort to your plate carrier with minimal weight and bulk. The Padded Plate Backer Kit includes two, Non-Ballistic foam inserts, that can be utilized in multiple configurations based on your needs. The FS-PPBK also features channels on the body side, to provide increased ventilation and shock absorption.

This is a Non-Ballistic Foam Insert and Should Not be used as a Ballistic Plate.

Tough Hook

• Grip handle

• 120lb load capacity

• I-beam and impact resistant resin

• Manufactured in the USA

MSRP: $19.92

#: 18-00124

The Tough Hook is a purpose-built heavy duty hanger which is the perfect accessory for any FirstSpear Plate Carrier. It is designed to hold up to 120 lbs and handle rough daily use. Flip it over and use the built-in carrying handle to easily carry your plate carrier wherever you go.

Every Tough Hook comes with a 1”x5” self-adhesive loop strip which allows for the easy addition of a customized 1”x5” FirstSpear Cell Tag. Adding a cell tag is a great way to quickly identify which plate carrier is yours.

•

FirstSpear

•

•

•

•

Operators Two Point Sling

• Designed for AR Carbine weapons

• Will work with other weapons

• Fully adjustable strap

• Low bulk

MSRP: $40.94 Part #: 15-00791

Designed directly by a current Texas Law Enforcement Tactical Officer and SWAT competition competitor, this sling is designed specifically for AR Carbine style weapons but will fit a wide variety of SMG’s, Carbines, and Shotguns. The strap is fully adjustable, low bulk, lightweight and extremely effective.

FS | CSM Single Point Sling

• Steel clash hook with elastic webbing sheath

• Bungee Retention Cord with speed tab

• Stow point

• Easy to use

MSRP: $50.21 Part #: 15-00680

The FirstSpear CSM Single Point Sling features a rugged steel clash hook that has a permanently attached elastic webbing sheath that keeps the hook quiet and protects your receiver from unwanted scrapes and scratches. The sling now has a Bungee Retention Cord with FirstSpear Speed Tab for storing the sling when attached to the weapon and minimizing snag hazard specifically during deployment from a vehicle.

Cord and Tube Holder

• Sold in packs of 6

• Webbing loop on a hook square

• Works with 6/12 attachment slots

• Secures buoyancy hoses or communication wires

MSRP: $44.35

Part #: 90-00104

The Cord and Tube holder is an elastic webbing loop on a hook square. It can be exposed through a 6/12 pocket attachment slot on FirstSpear carriers and secured on the inside. It can also be used to secure buoyancy compensation hoses in place. The Cord and Tube Holder can also be fastened between the layers of your shoulder straps to route your communications cables. (Sold in packs of 6)

Weapons Retention Catch

• Secures weapon to a platform

• Works with carbines, sub guns, and shotguns

• Easy to adjust

• Can be overpowered if needed and reset to use again

MSRP: $30.81

Part #: 15-00091

The Weapons Retention Catch is designed to help secure your weapon and is versatile enough to be worn on practically any platform. This essential item provides solid retention for carbines, sub guns, and shotguns. Its plastic closures are easy to adjust and they can be over-powered if required and reset to use again. This allows you to quickly access your weapon when needed.

APPAREL

Asset

• ACM BASE 100 Merino Wool torso

• Tencate Defender ® M 3oz plain weave sleeves

• Anti-Friction NanoGLIDE ® mesh underarms

• Inherently heat and flame resistance

• Advanced moisture wicking

• Anti-microbial properties

MSRP: $232.78 Part #:14-00039

Developed and engineered to be a gunfighters best friend the Asset lives up to its name. Offering high heat and flash flame protection Generously cut in the neck and sleeves. The torso is built with FirstSpear ACM Base 100 American Merino Wool with advanced NanoGLIDE® ventilating mesh in the armpits. Fitted with a slight stretch the Asset is cut long so that it will remain tucked in your pants. Low profile loop attachment points Standard on the Asset for FirstSpear Cell Tags and IFF. Each sleeve has a pocket on the shoulder and a standard cuff tab.

Field Shirt

• ACM BASE 100 Merino Wool

• Generously cut

• Use as a base layer or on its own

• Short or long sleeve

• Long-term comfort

The all new Field Shirt is generously cut for long-term comfort on extended adventures or daily wear on the job. Using the very best of proven materials brought forward in a technically advanced package the Field Shirt blends comfort, performance, and fit. Giving you the very best function in styles and colors only FirstSpear can provide. Use it as either the ultimate base layer or on its own, available in short and long sleeve.

Short Sleeve

MSRP: $70.96 Part #:14-00018

Long Sleeve MSRP: $80.79 Part #:14-00029

Full

Hooded Field Shirt

• High performance

• Generously cut for long-term comfort

• Thumb holes

• Oversized Hood

MSRP: $103.72 Part #:14-00041

ACM Base

The Hooded Field Shirt uses ACM Base 100 for a generously cut lightweight garment built for long term comfort on extended adventures or daily wear on the job. Features a large hood, low profile cuffs and thumbholes. Leveraging the naturally occurring performance benefits of wool the Hooded Field Shirt is a technically advanced package blending comfort, performance, and fit.

Base Layer Bottoms

• Flat seam technology

• Gusseted crotch

• Performance waistband

• Front facing fly

FirstSpear has added three Base Layer Bottoms to the Advanced Clothing Materials (ACM) Line. Made from ACM Base 100, these bottoms are a great way to layer up and stay warm. All three styles feature a front facing fly, gusseted crotch, and flat seamed technology. The Base Layer Bottoms are extremely comfortable, naturally moisture wicking, and have a waist band treated to minimize water hold. 100% assembled with all US Materials exclusively in the United States.

Boxer Briefs

MSRP: $61.14 Part #: 14-00044

Mid/Crop MSRP: $98.26 Part #: 14-00043

Full Pant MSRP: $109.17 Part #: 14-00042

ACM Base

All Sales Final on Base Layer Bottoms

Mid/Crop

Beanie Leather Patch

• Warm ACM 600 Merino Wool

• Wicks away moisture

• Low profile pile

• Covers ears

MSRP: $55 Part #

Neckie

• Breathable open mesh design

• Low profile attachment points

MSRP: $53.49 Part #: 14-00017

• Extremely lightweight ACM 600 ACM Base

The new Beanie will keep your dome warm, wick away moisture, and is exceptionally soft. It features a double-stitched edging with a premium laser engraved leather FS logo patch that is stylishly offset. The beanie is constructed from ACM 600 wool. It’s perfect for a cold day at the range or heading around town. It is carefully constructed to strategically taper slightly longer at the neck to prevent a draft and to keep the hat in place and prevent from riding up.

• Versatile

Built with a tight, open mesh design for breathability, the Neckie is a tube that can be worn as a turtleneck, hat or even a hasty balaclava. The mesh design aids in preventing your goggles from fogging up when you wear it over your mouth. Low profile pile attachment points in key areas let you put on IFF as required. With a variety of uses and extremely lightweight, the Neckie is something you don’t want to go outside the wire without. The Neckie is constructed of ACM 100 base wool.

Every Day Sock

• 82% Merino Wool / 12% Nylon / 6% Lycra

• Enhanced support ribbing through arch

• Extra light top for improved heat dissipation

The Every Day Sock is proudly made in America and made of 82% Merino wool, 12% nylon and 6% Lycra. Made for comfort with a reinforced heel and toe box, the Every Day Sock comes in four sizes: small, medium, large and extra large. A reinforced cuff up top helps keep socks in place during wear.

Boot Super Sock

• 86% Merino Wool / 8% Nylon / 6% Spandex

• Reinforced Heel and Toe Box

• Support ribbing through arch

The Boot Super Sock is proudly made in America with 86% Merino wool, 8% Nylon and 6% Spandex, the FirstSpear Boot Sock is made to keep your feet comfortable and dry in any situation. Supportive ribbing throughout arch and the naturally antimicrobial properties allows your foot to breathe in all climates. A reinforced cuff helps keeps the sock in place during wear. One sock doesn’t fit all; they come in small, medium, large and extra large.

Mid Shirt

• ⅔ Zip

• High collar

• ACM Mid 400

• Wicks away moisture

MSRP: $141.93

Part #:14-00027

Squadron Smock

• Wool Interior

• Brushed nylon exterior

MSRP: $545.89

Part #:14-00020

ACM Mid ACM Mid

• Multiple pockets

• Spacious adjustable hood

• Oversized buttons

The Mid Shirt is a premium multipurpose garment that provides exceptional performance characteristics while being very comfortable and casual enough to wear every day. It has a ⅔ zip, which allows for extra ventilation, along with a high comfortable collar. The Mid Shirt utilizes ACM Mid 400 which is a dual layer material using superfine polyester on the interior and our 100% USA Merino Wool exterior. The polyester wicks away moisture from the body and transfers it to the absorbent wool exterior. This material makes for an exceptionally high-performance garment that can be worn all on its own or as a base layer.

Depending on your circumstances, the Squadron Smock can be a uniform top, a weather barrier, or even a hasty load carrier. The Squadron Smock features ACM 400 in the interior lining for maximum moisture wicking and comfort. An oversized hood will fit over your helmet with most night vision attached and an easily adjusted stiffener in the bill will help keep the shape. Loaded with pockets and features, the Squadron Smock has a loose fit to accommodate additional layers. Oversized buttons that interface into slightly undersized holes provide security from windblast received in open vehicles or helicopters. Tough and flexible brushed nylon exterior with a wool interior.

• Wicks away moisture

• Full length zipper

• Hood and pockets

• Thumbholes

MSRP: $240.19

Part #:14-00022

Lightweight Vest

• Internal and external chest pockets

• ACM Mid 400

MSRP: $103.72 Part #:14-00063 ACM Mid ACM Mid

The Hoodlum Hoodie is constructed from ACM MID 400 which is a 100% polyester interior and 100% Merino wool exterior, designed to quickly wick away moisture from the skin and absorb into the outer wool layer. It features a comfortable fit that still has quite a bit of stretch to it. There is also a full length front zipper and a form-fitting hood with two front hand warmer pockets that zip shut. Thumbholes have been built into the wrist over style cuffs as well. The Hoodlum Hoodie can be worn stand-alone or as a component of a clothing system.

• Wicks away moisture from the body

• Traps warmth even when wet

• 1/4 zip

The FirstSpear Lightweight Vest is a great addition to the ACM line. It is low bulk, high warmth garment using FirstSpear’s ACM 400 dual-layer material. Additional features include the quarter-zip closure in the front. Along with the external and hidden internal chest pockets which are lined with super lightweight cooling mesh. In the back, there is a hem scoop into a tailcoat style to cover your waistband when active or bending over.

Woobie Full Zip

• FirstSpear’s warmest wool blend

• Chest Pocket

• Full Zipper;

• Zippered Side Pockets

• Thumbholes

MSRP: $323.17

Part #:14-00062

ACM Warm

Comprised of ACM-Warm 600, FirstSpear’s warmest wool blend, the Woobie is a great addition to the FS wool line. It utilizes an extremely lightweight 50/50 blend of our American Merino Wool and Polyester and is fully Berry Compliant. The Woobie features a stand-up collar, full zipper and wrist overs with thumb holes. You will also find a slightly longer tail for added comfort and warmth. It is outstanding on its own or as a component of a clothing system. ACM-Warm 600 is a heavyweight Merino Wool Blend with super soft brushed fleece interior, designed for the coldest temperatures.

• FirstSpear’s warmest wool blend

• Lightweight

• Stand-up collar

• Low profile neck zipper

• Thumbholes

MSRP: $308.97

Part #:14-00021

ACM Warm

The Woobie is back with major advancements in materials and craftsmanship. Comprised of ACM Warm 600, FirstSpear’s warmest wool blend, the Woobie is a great addition to the FirstSpear wool line. It utilizes an extremely lightweight combination of fabrics while retaining all the benefits of wool.

The Woobie features a stand-up collar, low profile neck zipper and wrist overs with thumb holes. You will also find a slightly longer tail for added comfort and warmth. It is outstanding on its own or as a component of a clothing system. ACM Warm 600 is a heavyweight Merino Wool blend with super soft brushed fleece interior designed for the coldest temperatures.

Technical Woobie

• Nylon accents for abrasion and wind resistance

• Adjustable hood

• Merino lined hand warmer pockets

• Discreet cable management.

MSRP: $349.37

Part #:14-00065

ACM Warm

Fully featured with top of the line materials including FS ACM 600 Merino for warmth and premium nylon accents add abrasion and wind resistance. We incorporated a modest tail, high collar, adjustable hood, thumb holes, as well as generous hand warmer pockets lined with FS ACM 100 Merino. The Full-length zipper and pockets utilize premium zipper hardware and pulls. Buttonholes inside the hand warmer pockets along with cord loops along your internal zipper seams let you route your earbuds for easy and discreet cable management. Hood draw cords stash down inside for windy days and an external loop hanger on the back gives you a handy place to secure the garment.

Everyday Vest

• Internal and external chest pockets

• Wicks away moisture from the body

• Traps warmth even when wet

• 1/4 zip

MSRP: $131.01

Part #:14-00064

ACM Warm

Comprised of ACM-Warm 600, FirstSpear’s warmest wool blend, the Everyday Vest is a great addition to the FirstSpear wool line. It utilizes an extremely lightweight 50/50 blend of our American Merino Wool and Polyester and is fully Berry Compliant. ACM-Warm 600 is a heavyweight Merino Wool Blend with a super soft brushed fleece interior, designed for the coldest temperatures. Additional features include the quarter-zip closure in the front, along with the external and hidden internal chest pockets. In the back, there is a hem scoop into a tailcoat style to cover your waistband when active or bending over.

•

Brawler

•

•

• Protective collar

• Breathable

•

The Brawler is a Flame Retardant (FR) shirt made with the latest materials. Typically, FR Garments are stiff, uncomfortable, and have a blocky fit due to the nature of the fabrics selected in there construction. FirstSpear isn’t “typical”. The Brawler uses advanced materials and enhanced design features to give a wide range of uses.

Rash Guard

• Ultralight compression fit

• Protects against rubbing and abrasion while wet

• Natural sun / UV protection

• Dries quickly

Constructed from a high-performance USA poly/spandex, the Rash Guard is designed for a compression fit that dries extremely quick. Smooth flat seams help protect skin from rubbing and abrasion commonly found in a maritime or watersport environment.

Short Sleeve MSRP: $58.83 Part #: 14-00046

Long Sleeve MSRP: $64.87 Part #: 14-00051

Wind Cheater

• Ultralight breathable shell

• Durable Water Repellent (DWR) Finish

• Extra-large hood fits over helmets

• Low profile hook and loop attachment points

Filling the mid-weight niche of our technical apparel line, the Wind Cheater has a Durable Water Repellent (DWR) Finish and excellent wind shedding characteristics. It is also quiet and flexible. The Wind Cheater features a large hood which fits over helmets without a problem and is cut generously to aid in movement. Low profile hook and loop attachment points are provided to attach FirstSpear Cell Tags and IFF.

Halifax Jacket

• Ultralight breathable shell

• Durable Water Repellent (DWR) Finish

• Hood-less

MSRP: $159.99

Part #: 14-00068

A tip of the hat to its namesake, the Halifax Gibbet (guillotine), this “headless” or hood-less Wind Cheater has all the essential features covered. Soft and quiet with a Durable Water Repellent (DWR) finish, it breathes like a T-shirt, sheds wind, and dries very quickly. Not a rain proof jacket, but it will shed some moisture thanks to the DWR coating and will dry very quickly. Great compression and features bungees at the bottom to cinch the jacket tightly. A longer tail in the back is perfect for range days and keeping you out of the elements.

It has sleek large bicep pockets that will fit your essentials. The Halifax Jacket is “true to fit”, your t-shirt size is your jacket size. If you wear a large shirt and don’t plan to layer heavily underneath, go with a large Halifax Jacket. The sizing is also identical to our popular Wind Cheater jacket.

Scrap FR Shirt

• Extremely lightweight

• Flame retardant

• 3.2 oz advanced aramid blend

• Enhanced comfort

• Heat mitigation

MSRP: $207.44

Part # 14-00060

Extremely lightweight with highly functioning durability the Scrap is also Flame Retardant. Super-versatile due to its low bulk and options for wearing the Scrap can be worn over a layer for some protection from hot brass and open flame or in extremely high humid environments worn on its own. Soft, pliable, and full of options that enhance comfort as well as heat mitigation. Utilizing a 3.2 oz advanced aramid blend, the Scrap is machine wash safe and has minimal shrinkage.

Centurion Pants

• Ripstop nylon and combed cotton

• Nano glide stretch mesh pockets

• Quick dry, breathable material

• Integrated low profile belt systems

MSRP: $128.58

Part #: 14-00040

The FirstSpear Centurion Pants are made from ripstop nylon and combed cotton, and have been sized using the same standards as military uniforms. There are many unique comfort features including nano glide stretch mesh pockets, quick dry breathable materials, and an integrated low-profile belt system that uses customized BioThane webbing and a jam lock buckle. Removable poron foam inserts on your left and right inside hip let you carry your pistol, knife or phone on the belt with total comfort. The belt loops on the Centurion Pants have been spaced to accommodate on-thebelt carry and off-hand draw as needed. The side pockets are made of 520 stretch fabric and will easily fit folding knives, common pistol magazines, and similarly sized items.

Centurion Shorts

• Quick drying

• Integrated low-profile belt system

• Nano glide stretch mesh pockets

• Ripstop nylon and combed cotton

• 11.5” Inseam

MSRP: $112.68

Part #: 14-00052

Packed full of features the Centurion Shorts from FirstSpear are a must have. Designed alongside the Centurion Pants they share the same great features. 100% Made in the USA with ripstop nylon and combed cotton. A integrated low-profile belt adds security and is made of BioThane webbing with a jam lock buckle. Some of the other features are nano glide stretch mesh pockets, quick dry breathable materials, and removable poron foam inserts for added comfort when used with a holster.

Vision Augmentation System

• Attaches to single or multi-tube systems

• Fully adjustable soft harness

• Comfortable fit

• Adjustable chin strap, positive lock hardware

• Boa® Head Band

• Easy cable management

• Attachment fields for IFF and the Battery Pack

MSRP: $428.10 Part #: 90-00085

Helmet Covers

• Ultralight compression fit

• Protects against rubbing and abrasion

• Natural sun / UV protection

• Dries quickly

The Vision Augmentation System (VAS) Soft Harness is a fully adjustable soft head harness. It takes the experience gained from the FirstSpear Helmet Cover and pairs it up with unique high-performance adjustment systems to give you a perfect fit on the head or over the FS Beanie. The VAS Soft Harness will let you rapidly attach your single or multi-tube system and arm straight to it.

Hybrid–Ops Core FAST Ballistic

Fits Fast Ballistic, Carbon, Base Jump, and Sentry MSRP: $100.04 Part #: 15-00084

Maritime MSRP: $100.04 Part #: 15-00050

Solid Stretch-Ops Core

FAST Ballistic

Fits Fast Ballistic, Carbon, Base Jump, and Sentry MSRP: $100.04 Part #: 15-00081

Maritime MSRP: $100.04 Part #: 15-00059

Solid Stretch-Ops Core

Forager Cap™

• Low nap pile for cell tags and patches

• Eye glass channels on front and back

• Ventilation and wicking properties

• Adjustable hook strap

• Extreme comfort

The Forager Cap is built with a slightly longer brim that gives extra shade and has a preformed fold which allows you to store it flat in your pocket. The front of the cap has a lightweight breathable low nap pile that will let you apply a PVC Patch or FS Cell Tag.

Standard Profile

MSRP: $ 43.15 add $2 for MultiCam Part # 14-00015

Low Profile MSRP: $43.15 add $2 for MultiCam Part # 14-00014

Kojin Balaclava

• Heat and Flame resistant

• Meets UL and Navy standards

• Compatible with standard protective mask systems

• Can be used with helmet and shoulder protection

• Standard laundering

MSRP: $61.32 Part #: 14-00023

This Balaclava is flash and flame resistant and will transfer minimum thermal conductivity to the skin. The FirstSpear Kojin Balaclava meets the rigorous standards set forth by the US Navy for surface and submerged shipboard firefighting.

Light Weight Assault Ghillie

• Lightweight

• Weather resistant

• Covers equipment

• Stretch cord for underarm

MSRP: $307.67

Part #: 15-00725

Developed in conjunction with Treadswift, the LWAG is a lightweight concealment cloak that can be used for disrupting visual, infrared, or thermal detection. Utilizing lightweight, weather resistant mesh, and Trelleborg combination patterning, the LWAG can be garnished as necessary or used as is. Generously sized to cover equipment, but still easy to stow on your pack or load carriage, it has a stretch cord for under arm positioning and a security strap for the front that can be adjusted for height and girth. The hood of the LWAG is secured in place with large smock style buttons.

Operator Glove

• Maximum manipulation

• Touch screen thumb and index finger

• High dexterity leather (FS-HDL) palm

• Improved breathability

• Berry Compliant Materials

• Assigned SOCOM NSN

MSRP: $82.97

Part #:14-00026

Sand/Coyote

NSN: 8415-01-666 Commando Green NSN: 8415-01-668

When maximum manipulation and tactility are required while protecting your digits consider the Operator Glove (OG) first! Comprised of the most technologically advanced materials and modern construction details no corner is cut in this design. The trigger finger of the OG has an advanced patent pending design that will still give excellent transmission of trigger feel, magazine release and other key weapons functions.

Multi Climate Glove

• Brushed micro fiber suede palm

• Digital texture grip

• Adjustable wrist

• Lightweight

• Breathable

MSRP: $39.30 Part #:14-00053

When maximum manipulation and tactility are required while protecting your digits, consider the Multi Climate Glove (MCG) first! The palm of the glove is made from brushed micro fiber suede, while the back uses a premium polyester soft shell material. This lightweight material makes it feel like you’re not even wearing a glove. The trigger finger of the MCG has an advanced patent pending design that will still give excellent transmission of trigger feel, magazine release and other key weapons functions.

Cold Climate Glove

• Insulated

• Water resistant

• Allows basic trigger control

• Touch screen index finger

• Pittards Keratan Palm patch

• Adjustable wrist

MSRP: $92.80 Part #:14-00047

As with all FirstSpear equipment, this is simply not your average winter glove. The glove is built with a keratin leather palm patch, Primaloft Gold insulation, and a waterproof breathable insert. Incredibly warm with excellent dexterity allowing basic trigger control. Additionally, we removed the insulation from the upper half of the trigger finger to increase basic trigger manipulation and make it easier when using a touchscreen. In fact, touchscreen sensitive index fingers and adjustable wrist cuffs come standard on this premium cold climate glove from FirstSpear.

Fast Rope Mitt

• 100% Berry Compliant “Roper” Cow Leather

• Double Layered

• Firmer grain/external texture on the grain of the leather

• Softer texture on internal side

MSRP: $157.94

Part #:14-00036

The Fast Rope Mitt is designed to be a minimalist, lightweight capability that can easily be transported on the Professional User and available for Fast Rope Insertion. the FRM can be used with or without the First Spear – Operator Glove (FS – OG) and is constructed using the best in abrasion resistant, heat mitigating materials. Cut and assembled to fold flat for transport in a typical Uniform Pocket the FRM is low bulk and supports Short, Medium or Extended Fast Rope Insertions up to 90 Feet (27.4 Meters). Additionally, the FRM has an advanced two finger pattern that allows the User to rapidly expose his trigger finger to engage a firearm, this method is far faster than actually taking off a Glove during extreme situations, the FRM can be pulled partially off and retained around the wrist by the second elastic strap across the back until time has become available to secure it through the reinforced retention hole at the cuff with a carabiner or snap hook.

USA Performance Briefs

• Berry Compliant

• Ultra-lightweight flex grid blend

• Moisture Wicking / Anti-Microbial

• Low profile comfort waistband

• Enhanced front panel for extra support

• Pack of 2

All new FirstSpear Performance Briefs are packed full of features. Constructed from a flex grid polyester/spandex blend allows the Briefs to be extremely lightweight and breathable which translates to all-day comfort! Superimposed flat seam technology and a soft brushed elastic waistband that won’t roll over and stay where you want it. The flex grid is a four-way stretch design with exceptional antimicrobial and moisture-wicking properties. Extra room built into the front panel for extra support. Sold as a two-pack in graphite and black.

MSRP: $65.50

Part #: 14-00061 w/Fly

MSRP: $65.50

Part #: 14-00070

All Sales are final on FirstSpear Performance Briefs

Pub Shorts

• New performance material blend

• Improved elastic waist band

• Lightweight and breathable

• 8.5” Inseam

MSRP: $72.24

Part #: 14-00058

The new and improved pub shorts are here. Made in the USA with a lighter weight breathable material. The all-new material allows for more stretch and is moisture wicking. Pockets have also been redesign to enhanced and better conform to the body. The elastic waistband in a new softer knit and feels better on your skin. An extra belt loop has been added and the inseam is now 8.5”

Line One Belt

• Urethane covered nylon

• Superior strength and weather resistance

• Tempered non-slip coating

• Impervious to sweat and water

• Cerakote Buckle

The line one belt is our most popular everyday belt! Borrowing its name from an old NSW term for the first level of clothing or gear, the Line One Belt has amazing tactical performance that maintains the high level of comfort and mobility usually associated with leather. Urethane covered nylon provides superior strength and weather-resistance. This belt won’t crack, peel, or become stiff in frigid temperatures. Specially tempered, non-slip coating eliminates “break-in” time and allows for leather like flex, yet it is impervious to sweat and water and will not stretch or lose its original shape. The Line One Belt is an excellent platform for concealed carry or for just keeping your pants up with style!

MSRP: $84.95

Part #: 15-00065

Sizing Guide Small 28-30" Medium 32-34" Large 36-38" X-Large 40-42"

MSRP: $25.44

Part #: 16-00043

Long Sleeve MSRP: $29.68

Part #: 16-00049

Rough Rider

MSRP: $29.99

Part #: 16-00072

Just the Tip Patch

MSRP: $25.44

Part #: 16-00046

Logo

MSRP: $25.44

Part #: 16-00071

Pop Art

MSRP: $29.99

Part #: 16-00077

Thin Blue Line

Short Sleeve

MSRP: $25.44

Part #: 16-00034

Long Sleeve MSRP: $29.68

Part #: 16-00036

Gustaf

MSRP: $29.99

Part #: 16-00074

Dad Hat

MSRP: $24.99

Part #: 16-00067

Icon Speartip

MSRP: $29.99

Part #: 16-00076

Multicam Black Trucker Hat

MSRP: $29.99 Part #: 16-00068

ICON Skull

MSRP: $29.99 Part #: 16-00075

Icon Speartip Flat Bill

MSRP: $29.99

Part #: 16-00069

Part #: 16-00004

ACKNOWLEDGMENTS

FirstSpear would like to thank our industry partners, who bring us the latest innovations in materials, provide us the ancillary equipment we need to insure compatibility, provide the sales channels needed to get our equipment to the field, and rely on us to build products under their premium brands.

FirstSpear thanks those competitors, who rather than cut corners and imitate, also push the industry by bringing innovative equipment to Professional Users.

FirstSpear thanks you, the user, the customer, for making FirstSpear one of the fastest growing individual equipment companies in the world.

The appearance of U.S. Department of Defense (DoD) visual information does not imply or constitute DoD endorsement.

Page 4,5 - Photograph: military dive operations, by SCPO Jayme Pastoric

Page 8, 9 - Photograph provided by PAO United States Task Force 160th Ft. Campbell

Page 10, 11 - Photograph provided by PAO United States Task Force 160th Ft. Campbell

Page 14, 15 - Photograph: military dive, by SCPO Jayme Pastoric