Technical data: Working width Height Fan diameter / depth No. Of blades Auger diameter Side strip R / L Length of snow discharge Chute direction Out put per minute PTO Rpm / Min Min. HP. Only rear mounting Front and rear Weight
S-220-1 220 cm / 86" 180 cm / 71'' 66 cm / 24 cm 26'' / 9'' 4 pcs. 350 mm / 14'' *+10 / +10 cm +4'' / +4'' 0 – 30 m / 0 - 12'' 360° hydr. 9-10 m³ / 318 ft³ - 353 ft³ 540 60 HP Yes No 560 kg / 1.232 Lbs
S-220-3 220 cm / 86" 180 cm / 71'' 66 cm / 24 cm 26''/ 9'' 4 pcs. 350 mm / 14'' *+10/ +10 cm +4'' / +4'' 0 – 30 m / 0 - 12'' 360° hydr. 9-10 m³ / 318 ft³ - 353 ft³ 540/1000 60 HP Yes Yes 575 kg / 1.265 Lbs
S-255-1 255 cm / 100" 200 cm / 79'' 80 cm / 35 cm 31'' / 14'' 4 pcs. 430 mm / 17'' *+15 / +15 cm +6' '/ +6'' 0 – 30 m / 0 - 12'' 360° hydr. 13-16 m³ / 459 ft³ - 565 ft³ 540 80 HP Yes No 1020 kg / 2.244 Lbs
S-255-3 255 cm / 100" 200 cm / 79'' 80 cm / 35 cm 31'' / 14'' 4 pcs. 430 mm / 17'' *+15 / +15 cm +6'' / +6'' 0 – 30 m / 0 - 12'' 360° hydr. 13-16 m³ / 459 ft³ - 565 ft³ 540 80 HP Yes Yes 1035 kg / 2.277 Lbs
S-255-3 Proff 255 cm / 100" 200 cm / 79" 80 cm / 35 cm 31" / 14" 4 pcs. 430 mm / 17" *+15 / +15 cm +6" / +6" 0 – 30 m / 0 - 12" 360° hydr. 13-16 m³ / 459 ft³ - 565 ft³ 540 80 HP Yes Yes 1035 kg / 2.277 Lbs
Fransgård S-Snow blower
Accessories Hydraulic adjustment of the top spigot (Standard on S-255-3 Proff modells) Snow edge cutter long nozzle for loading snow on a truck Wheelset
Springs releases at the lift arms Since we are constantly innovating our designs, we reserve the right to making any technical changes !
Distributed by:
Since we are constantly innovating our designs, we reserve Manufacturer the right to making any technical changes !
Fransgård Maskinfabrik A/S Fredbjervej 132 9640 Farsø Denmark Tlf.+45 98632122 www.fransgard.dk
S-220-1 S-220-3 S-255-1 S-255-3 S-255-3 Proff
2 component paint on proff model Infeeder in the center of the auger ensure optimal infeed to the fan. Fanhousing is built in domex 420 steel (only S-255 models)
Middle and top hatch is fitted with strong bolts with the possibility of lubrication. Hydraulic top hatch is standard on S-255-3 proff models
bolt magazine is standard
Extra reinforced sides of the chassis in Domex 420 steel. (S-255 models) all snow blowers have skids in Hardox 500 steel Disc of the end of the auger provides greater capacity and better operation