Joiners Magazine December 2021 by Magenta Publishing

Joinery, Cabinetmaking & Kitchen Manufacturing Industries

December 2021

handles words & pictures

saws your next replacement

hinges dark trends

Now Whisper Quiet!

Scan this QR code with your camera to view the design option video.

Scan this QR code with your camera to view the functionality video.

The Hawa Concepta Range Now whisper quiet! Ultra-quiet sliding doors have been the trademark and recipe for success of Hawa for over 50 years. With the latest generation of Concepta - the last possible sources of noise have been eliminated. If you listen carefully, you will be able to hear... nothing at all, actually.

NEW & IMPROVED!

Soft Closing. Hinges now come standard with soft-close to ensure the most smooth and silent action.

Increased Stability. The new torsion panel that increases the stability of the Hawa Concepta 25 and 30 system while closing.

Completely Silent. The soft close dampener and other subtle improvements in the components ensure a totally smooth movement and absolute silence.

www.hafele.co.nz

View the catalogue online.

HAWA CONCEPTA & FOLDING CONCEPTA NEW GENERATION IV

sales@hafele.co.nz

0800 4 Hafele

www.hafele.co.nz

JOINERS Magazine December 2021 page 1

for a

perfect finish start with GoldenEdge HMR0 GoldenEdge HMR0 is the proven MDF that provides a perfect paint finish. It’s that simple. Eco friendly GoldenEdge HMR0 (high moisture resistance zero emissions) is rated E0 and comes in 9mm, 12mm, 16mm, 18mm and 25mm thicknesses. It’s recommended for kitchen units, cabinets,

HMR0

bathroom vanities - everywhere a perfect paint finish is required. GoldenEdge HMR0 is just one of the many MDF products provided by Nelson Pine Industries using the advanced technology of the Küsters continuous press and offering an unsurpassed range of board densities and thicknesses.

Ec Frienod

helpin

g the e

nviron

ment

FURNITURE FITTINGS& No. 32080 38

Nelson Pine Industries Ltd, Nelson, New Zealand

www.nelsonpine.co.nz

JOINERS Magazine December 2021 page 2

MS 21526 J

form and finish 18

COVER

The sheer range of styles and ﬁnishes available means handle selection causes as much comment and uncertainty as any component within the kitchen. We provide some pictures to help.

Laminex Acrylic Panel - p.16 Florence Charvin Photography

COLUMNS Master Joiners 4

Master Joiners President Andrew Reilly talks about the importance of reaching out, education and succession planning.

the next move 26 Peter Hay Kitchens have always been at the forefront of the NZ kitchen manufacturing community. The recent purchase of three edgebanding lines from German machinery supplier Homag has continued that tradition.

Laminex Update 15

Mike Arthur engenders optimism with the latest residential and commercial consent figures showing record numbers being processed.

Steering a Course 76

Ian Featherstone acknowledges current stress levels and oﬀers a few thoughts on how we might minimise the risk and impact.

saws & hybrids 30 Drill bits have taken over many of the functions of the saw blade in processing panel and solid timber. But sometimes the saw remains the best option - we look at the place of the saw in the modern factory.

Due Process 78

Geoﬀ Hardy asks - how are joiners going to protect themselves against their profitability being eroded by prices rises in the aftermath of the pandemic?

NKBA report 86

NKBA president Nick Thompson gives a wrap on a year which saw covid restrictions, the forming of Designers of NKBA and record numbers at conference.

hinges 46 While looks are important, function is critical and durability is necessary, a big plus for cabinetmakers when it come to hinges is that they are simple to ﬁt and easy to adjust. We look at options that cover all criteria.

REGULAR News & Info 4 - 14 Education 74 NZJMF membership 80 State of the Industry 84 Classiﬁeds 88 Advertiser index 88

vortek spaces 54 3D presentation software has been creating a bit of talk in the New Zealand design community lately. We spoke to several users of Vortek Spaces who are ﬁnding the software useful in helping them share the vision.

$20,000.00 cash giveaway from Evostone - p.68 JOINERS Magazine December 2021 page 3

from the president 11.11.2021

Reaching out and planning

irstly I’d like to shout out to all of our members in the Auckland, Northland and Waikato areas, our heart goes out to you guys. You’ve certainly had the short end of the stick with all the restrictions you’ve had to work under and try keep your hardearned businesses aﬂoat.

I take my hat oﬀ to all of you and don’t forget to reach out to your fellow Master Joiner community for support if needed, you’d be surprised how much diﬀerence a phone call can make to someone who you know is struggling with all of this. In this digital age a text or email may be the quickest way to communicate but nothing beats a real phone conversation. Master Joiners are there to help in any way possible you just need to reach out. On a lighter note. Master Joiners recently reached out to a good cross section of our members to

attend an education retreat with the aim to better educate our members on the benefits of being a member of the association and to get a better understanding of what head office and the executive do to support our membership. This was the first exercise of its type and was rated a great success by all who facilitated and attended, so if you’re ever invited to attend one of these workshops in the future please don’t hesitate to put your hand up and participate. The only downside was that several participants from Auckland and Waikato were unable to attend due to covid restrictions but we plan to take this to them as soon as we are able to. Education plays a major role in our industry, from the importance of training apprentices without whom our trade would simply die to training ourselves on better business practices to training

our key staff in growing more knowledge about business the industry and better practices all of which will grow our own businesses. This leads into surrounding yourself with skilled staff which makes succession planning a much simpler process. Succession planning just like myself is not something we prioritise to prepare ourselves for until sometimes it's too late or you’re getting to a stage in your working life where you want to take a backwards step from the day to day grind and start passing the torch to the next generation coming through. This isn’t something you can start too early and we need to ensure we’re passing our knowledge down the chain because believe it or not you probably know a lot more than you give yourself credit for.

the world doesn’t actually end at Christmas and restart at New Years so those jobs you can’t get done can most probably wait until next year. Hope you all have a good break and forget about work and Covid for a while. Andrew Reilly National President Registered Mastered Joiners

That’s all from me, I hope you all have a good lead into the stupid season and just remember

May 19th – 21st 2022, Marlborough Events Centre, Blenheim JOINERS Magazine December 2021 page 4

JOINING IT

ALL TOGETHER Partnering with CARTERS makes it simple to get the pieces of the puzzle sorted for that perfect finish, every time.

You can count ount on us to stock the market’s best-known brands. We’ve been servicing the joinery market for decades and understand the special requirements needed by a joiner, not a one size fits all approach.

Let’s partner artner togethe together er on ext project. your next The full range of od Melamine Bestwood s available at your your colours ARTERS. local CARTERS.

0800 0 CARTERS | www.carters.co.nz

150 50 YEARS

JOINERS Magazine December 2021 page 5

BRANCHES

ACCOUNT ACCOU

from the Publisher

The magazine for the joinery, cabinetmaking & kitchen manufacturing industries Oﬃcial Publication of the New Zealand Joinery Manufacturers Federation

Editor Michael Goddard michael@joiners.net.nz Multiple pick up - Treotham p.71

Publisher Bob Nordgren bob@joiners.net.nz

Of Hinges & Handles ... At last Winter has gone and Summer is upon us. We have a truly bumper Christmas issue for you this time to see you through the holiday break. Easily fitted and adjusted hinges are key attributes of the modern hinge in the kitchen (and anywhere else). We have a few of the latest from the leading suppliers for those who are either building new or renovating their kitchens (and there are a lot of people doing this). Despite the handle less look in the kitchen remaining popular there is still great demand for handles as well. We have a look at some of the latest offerings. In the machinery sector we have a look at the use of saws and the related tool supply scene. There are new offerings from a number of suppliers as well. Of note are Fisher & Paykel, Amorini, Cardona and Halliday & Baillee. An interesting item is the latest from well known kitchen manufacturer Peter Hay Kitchens. Always a forward thinker, he has put his money up front and made a significant investment for his business. They say everybody wants to know what Peter Hay is doing, well find out in this issue. We have our 2022 Wall Planner enclosed as well so you’ll be able to scope out the year from the kick off! A note here about the State of Industry reports in this issue: make for real interesting reading as to how the joinery, cabinetmaking and kitchen industries are faring and where they see themselves in 2022. Well 2021 has been a colourful year with Covid ever present. It has seen us in and out of lockdown especially in Auckland so I think we are all looking forward to more freedoms over Christmas. Business has been, despite Covid, surprisingly resilient thanks in large part to a ongoing strong construction sector. Here’s hoping it continues into next year. Michael and I wish to thank all those who have advertised in the magazine (and those who have supplied editorial), all our column writers and of course you the readers for your ongoing support. All of you have a great Christmas and New Year break and see you again next year. Bob Nordgren

JOINERS Magazine December 2021 page 6

PRINTERS

DISTRIBUTORS

M 42 Aldersgate Rd, PO Box 27 - 513, Mt. Roskill, Auckland, 1440, New Zealand. Ph: 64-9-624 4680

Joiners Magazine Online

www.joiners.co.nz ISSN 1173-6836

JOINERS Magazine is the oﬃcial publication of the New Zealand Joinery Manufacturers Federation. It is distributed to members of the joinery, cabinetmaking and kitchen manufacturing industries and is published quarterly in March, June, September and December. Advertising statements or editorial opinion are not necessarily those of the publisher, its staﬀ, the New Zealand Joinery Manufacturers Federation Inc., or their executives, unless expressly stated. All articles printed in JOINERS Magazine are subject to copyright and cannot be reproduced without the express consent of the Publisher or the authors therein. Advertisements and articles are accepted without liability as to the accuracy or otherwise of the factual matters represented.

AUTO MA TION

BIESSE.COM

VERSATILE EFFICIENCY.

Easy use, optimisation of the production process, constant top machining quality on every type of material - even the most delicate. Automated solutions for panel movement to reduce standby time and eliminate the risk of damage to the material.

Selco o WN6 ROS

JOINERS Magazine December 2021 page 7

Eumabois General Assembly 2021

A successful restart despite the Corona pandemic Eumabois, the European Federation of woodworking machinery and tools manufacturer, held its annual General Assembly in November. After substituting the onsite event with a “Digital General Assembly” in 2020, the delegates and board members gathered again in person in Vienna.

Blum E-SERVICES E-SERVICES is our online service centre for cabinetmakers, installers, designers - and more. Find up to date and immediate information on all things Blum. E-SERVICES will support you and your team. Order Management 2.0. Did you know Kiwis make up the largest percentage of users for this online tool worldwide? It's something we are incredibly proud of, and the automation of getting orders into the system faster helps our team on the ground to get more orders out the door every single day! It frees us up to update ETA's on the system when we get delays from the ports, meaning you can log in and find your most up-to-date lead time instantly! Cabinet Configurator. The best way to plan, order and manufacture cabinets with Blum fittings. Use the "My projects" function to save, access and manage personalised configurations, and because it's an online service, there's no need for manual updates. Produce parts and cutting lists, production drawings and CAD/CAM data with just a few clicks. Product Configurator. New Zealand's most used E-SERVICE! Quickly and easily find fitting solutions, assembly instructions or planning information. Product Configurator will help you to select the correct hardware components for your job. Save your progress to "My library" or send your product configuration selections directly to Order Management to place an order for even greater efficiency. Sign up to E-SERVICES and learn why thousands of other Kiwis log in every day at e-services.blum.com or talk to your Blum Account Manager to discover the E-SERVICES package that best suits you. 

JOINERS Magazine December 2021 page 8

The opening topic was the general outlook on the woodworking industry which has been showing a rapid and very positive recovery. The figures, despite the fact that also the woodworking industry suffers from high material costs and lack of raw material, indicate a sustained growth rate in the mid-term. The global demand remains high, as evidence of the good resilience of the sector in response to the crisis triggered by the Corona virus. Megatrends such as digitalization and industrial automation, as well as a growing demand for home furniture and kitchens, stimulated by travel restrictions and the cocooning effect, are driving the woodworking industry, too. Looking at the Eumabois Exhibition Network 2021, most of the shows have been canceled. On the other hand, a full calendar of trade fairs is planned for 2022 with two top exhibitions events: HolzHandwerk in Nuremberg in March and Xylexpo in Milan with a new date in October. The positive signals coming from the exhibition sector are an important step towards the normality confirming the value and relevance of face-to-face events. The meeting in Vienna was also used to officially launch the new Eumabois website with completely renewed and modern graphics. There were also important news on the technical projects side.: OPCUA (Open Platform Communication Unified

Architecture) got the marketing name “IZY”, which was oﬃcially presented to the market during LIGNA.Innovation Network on September 27th, 2021. At the end of the Assembly, the president Jürgen Köppel expressed his sincere thanks to the hosting association FMTI and to all the present national associations, stating: “ … I ﬁrmly believe that one of the key pillars for the growth of our industry is our joint European approach.” The next Eumabois General Assembly will be held on 22nd23rd of September 2022 in the city of Krakow, Poland. 

JacksTech 2021 2022!

Along with many other events in Auckland, JacksTech 2021 was a victim of the COVID lockdown, so it’s been rescheduled for March 15-17, 2022. It will still showcase the latest innovations in our industry from across the globe, with much of the technology displayed on show for the very first time in New Zealand. Highlights include the latest developments in laser edge processing and 5-axis CNC machining, along with Felder Group’s revolutionary (PCS) panel saw safety system. Also on show will be the world’s fastest CNC nesting line, the Anderson GS-612; Fimal’s Concept 350 hybrid beamsaw/panel saw; and the Vitap K2 compact CNC machining centre.

Resene AquaLAQ

Water Based Paint Licence No 1296003

Waterborne low VOC coating system for cabinetry, joinery, shop fittings, kitchens and doors

• Economical • Hard and Durable • Waterborne 1K System • Authentic Resene colours

AquaLAQ is waterbased, low VOC, low odour and Environmental Choice approved. Better for your business and better for your customers.

Call 0800 108 008 or email help@reseneauto.co.nz to become a trained and registered applicator | reseneauto.co.nz/aqualaq JOINERS Magazine December 2021 page 9

trade fairs held as in-person events in this initial period of recovery have all clearly showed that the world of business cannot do without this time-honoured tool that is still so current and vital

Exceeding expectations, the in-person Pordenone show confirmed its position among the best of European trade fairs.

The furniture industry ﬁnally met up once again at SICAM Held in Pordenone, Italy, from 12th to 15th October, the twelfth edition of SICAM enjoyed a success that outstripped the most optimistic forecasts. With over 540 exhibitors from Italy and 28 other countries, the event marked a true confirmation of the strength of the sector of components and accessories for the furniture industry. Everyone was extremely eager to meet up again at trade shows: see each other and come face to face, work out thought processes together, exchange ideas and assess projects. Indeed, this is the very point of trade fairs. And at SICAM it was made easy, with attention paid to all leading global markets. Furniture industry professionals attended from as many as 97 foreign countries in addition to Italy, representing over 7200 companies. 66% came from Italy and 34% from abroad. This widespread representation was hard to imagine in the weeks

received at the event plainly prove this. We aren’t ones to blow our own horn, instead it is the actions of the companies themselves that show us whether the event works or not.” SICAM 2021 certainly demonstrated that it was very eﬀective. The trade fairs held as in-person events in this initial period of recovery have all clearly showed that the world of business cannot do without this timehonoured tool that is still so current and vital. leading up to the event due to all the restrictions imposed to curb the spread of the pandemic and with international ﬂight schedules still far from 2019 levels. “And yet many companies believed in us and invested with us,” explained Carlo Gobbi, SICAM founder and organiser. “They kept fully abreast of the market situation and had a real desire to return to in-person trade shows, aware that new business can be tangibly developed in

JOINERS Magazine December 2021 page 10

this format.” By all accounts the atmosphere in the halls was similar to that seen in pre-pandemic times and there was a clear eagerness to reconnect and get back to working as normal, with even higher intensity. “This year more than ever, it is true that those who came to Pordenone and chose to take part in SICAM in person had a very fulﬁlling experience,” Carlo Gobbi revealed. “The number of registrations to return in 2022

The date is set for October 2022, from Tuesday 18th to Friday 21st. The furniture industry already has its next meeting scheduled with the global business world in Pordenone. 

Jacks are having a spring clean that’s going to last all year… During their 75 years of trading Jacks have accumulated a large number of spare parts, accessories and tooling. Some of these remain invaluable to customers who are still using older machinery – being able to get parts for a machine that you seldom use is a lot more aﬀordable than having to replace the whole machine with a modern version. Where they can match an older part or accessory with someone still operating the relevant machine, Jacks will get in touch directly.

Good FIT The team at Fit are delighted to welcome Mark Bartlem to the team as Business Development & Speciﬁcation Manager. Many of you will be very familiar with Mark via his 13 years of service with Hafele, as Account Manager and as Regional Sales Manager. Initially he’s spending time ‘behind the scenes’ checking out Fit’s processes, systems and workings and getting to know the folk at Fit.

The many shelves of older but still new tooling will be listed online. So if you’re looking for something from the past, out of the ordinary, or just keen to grab a bargain, keep an eye on the Jacks website. Listings have already started and will continue as long as there’s stock. And there’s

a lot of old stock ….

A small selection of some of the tooling available.

www.jacks.co.nz

EgmontAir Dust & Fu me E x tracti on

Fit ﬁgure they must be doing something right to attract the experience and talent that Mark oﬀers. Welcome to the Fit family, Mark!

Your dust extraction specialists 0800 781 200

Wood Dust Extraction i | Spray Booths h

| Exhaust h Fumes Extractors Extraction Fans | Centralised Extraction Systems | Suction Benches Grinding Dust Extractors | Welding Fume Extraction www.egmontair.co.nz

sales@egmontair.co.nz JOINERS Magazine December 2021 page 11

JOINERS Magazine December 2021 page 12

WINDSOR HOUSE BY TOM MARK HENRY; PHOTOGRAPHER: PABLO VEIGA

ADVERTORIAL

Scan the QR code to register and be in to win

NEW TRADE RESOURCES NEW AND IMPROVED FISHER & PAYKEL TRADE RESOURCES INCLUDING A RANGE OF 3D FILES, SPECIFICATION GUIDES B

23 3/4"

AND DATA SHEETS TO SUPPORT JOINERS IN THE DESIGN,

DATA SHEET 24" Integrated Column Wine Cabinet

SCHEDULING AND BUILDING OF THEIR PROJECTS.

Model nos: RS2484V2RK1 / RS2484V2LK1 with Stainless Steel Door Panel, Contemporary Square Handle and Stainless Steel Toekick Panel NOTE: Left hand hinge model is a mirrored version of image

DATUM : FRONT OF DOOR MINUS STAINLESS STEEL PANEL

shown. (refer page 2 for metric measurements)

Product Dimensions a Overall height of product

PLAN VIEW

DATUM : FRONT OF DOOR MINUS STAINLESS STEEL PANEL

B Overall width of product c Depth of product front panels (excl. handles) d Overall depth of product (excl. front door panels) e Height from bottom datum to bottom of door

WALL

f Depth of toekick (excl. door front and toekick panels) g Height of door panel

Stay in the loop with new product releases and technical content by

h Width of door panel

i Height from bottom datum to bottom of handle j Height from bottom datum to top of handle k Thickness of handles

signing up to receive Trade Resources updates. Use the QR code on this

l Distance from side of fridge to the center of handle m Depth of handle (measured from front of door)

page to sign up to Trade Resources before 31 December 2021 and be 84"

5/8" 2 1/2" 1 5/8"

9 7/16" 7 7/8"

Minimum cabinetry gap clearance from edge of door panel

1/8"

84"

Overall height of cavity

84"

Overall width of cavity

24" 25" 25 9/16"

Minimum door clearance to adjacent wall (115° – full internal access)

14"

Minimum door clearance at 90° open, measured from front of door

26" 4"

p INDICATES CAVITY CLEARANCES --------------INDICATES PRODUCT DATUM --------------------

DATUM : FLOOR (LEVEL)

DATE: 18.03.2020

B 0

• Speciﬁcation Guides

32 1/8"

Minimum finished return inside cavity

• 3D ﬁles for Revit, ArchiCAD, Sketchup and Rhino • 2D CAD in dxf and dwg

79 7/8" 23 3/4"

65 11/16"

16 5/16"

Minimum depth of cavity (including door panel) if: - power plug is located in an adjacent cabinet - power plug is located behind appliance

The purpose-built technical content now includes:

4" 2 7/8"- 4"

62 9/16"

Clearance Dimensions

24"

o Width of door glass p Height from bottom of door to bottom of door glass

N A

3/4"

n Height of door glass

q Height from top of door to top of door glass

in to win a Fisher & Paykel 144 bottle Wine Cabinet valued at $5,729*.

in 84" 23 3/4"

20 inches

FRONT VIEW

PROFILE VIEW

IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16''). Please read the installation manual for detailed information on installing the product. For full installation instructions & specifications visit fisherpaykel.com

• Data sheets • Planning Guides New and improved technical content has been developed to help you by: • Prioritising accuracy and clarity of information to give you confidence • Delivering purpose built files specifically developed for the construction industry, not repurposed product engineering files which can be unsuitable to architecture • Detailed data sheets, hinge articulation files, or alternative installation files gives a level of dimensional information that is unique to Fisher & Paykel, giving designers and cabinetmakers better clarity and fewer opportunities for install mistakes • Providing high resolution models for real time rendering, parametric design in BIM and sophisticated scheduling giving you the ability to create schedules quickly and easily and identify clashes • Supporting various stages and needs of your project from concept through to documentation with a range of documentation and downloads *

For full Terms & Conditions, visit ﬁsherpaykel.com

Top: Data sheet for a Fisher & Paykel Integrated Column Wine Cabinet. Bottom: ArchiCAD model of a Fisher & Paykel classic range.

JOINERS Magazine December 2021 page 13

Blum Inspirations showcases customer innovation using Blum product.

Contract Services

Engineering & Upholstery

Inspiration the diﬀerence between good and great Without inspiration, there's no pushing forward. It motivates us to become better - removing boundaries and sparking new ideas. At Blum, we love hearing your thoughts and dreams because it inspires us and our future products. Your ideas become our reality.

Titan can function as a part of your operation. We can work in combination with your processes as a complimentary manufacturing source. In the current fast-moving market, Titan recognizes that it needs suppliers and customers who have the same can-do attitude as us. We know that we are only as good as the companies we have to support us. We recognize your company image is based on the last fit-out and we all must continually demonstrate our highest standard. Using Titan to complete your subcontract services will only increase your exposure as market leaders in the fit-out arena.

36 Honan Plc, Avondale, Auckland. Phone 09 828 1079

www.titanfurniture.co.nz JOINERS Magazine December 2021 page 14

Blum Inspirations is our platform to showcase real innovations created by our customers worldwide to help spread inspiration using Blum products and opens up the world of cabinetry with Blum hardware. A custom clothes horse using MOVENTO runners, a SPACE TWIN integrated into the sofa arm, or ergonomic storage solutions in a wardrobe or bathroom. Blum Inspirations is the next generation of sharing ideas. If you've created something inspiring with Blum products, email socialmedia. nz@blum.com to ﬁnd out about being featured on our NZ Instagram channel or online at blum-inspirations.com. All of these inspiring spaces can be viewed in person at our Christchurch Showroom in Wigram. 

Laminex New Zealand

update

Rising Consents

estive greetings, I hope the run up to Christmas is going well for everyone in industry, given the supply constraints, alert level changes and disruptions we all continue to navigate. Despite the challenges we have all faced the industry continues to experience strong demand. The latest Residential consent data for the year to September 2021 set a record of 47,331 consents. The market value for the 12 months to September is $20.1b, up 26% year on year. September also saw 4,483 new homes consented, close to the highest number set the previous month of 4,490 new homes. Townhouses remain the hot favourite in Auckland, making up 47% of all Auckland’s new consents in the year to September 2021, vs 21% of all new consents for the rest of New Zealand. Non-residential (commercial) consents for the year to September 2021 also rose by 10% to $7.7b year on year. This data indicates the potential for sustained strong demand for our industry and is positive news. To ensure you have the best possible selection of product and decors Laminex has launched several exciting updates. First cab oﬀ the rank is expanding our popular Laminex Acrylic Panel range to include a 26mm panel. We are also launching 31 x 1mm ABS and 31 x 1.2mm laser, to edge these sheets. Our Laminex Woodgrain Collection range will also be available in 25mm panels with matching 31 x 1.2mm laser edgetape for all decors and 31 x 1mm ABS edgetape. We are building stock now with all decors available by the end of January.

SCAN TO WIN A

Last month we launched exciting new Melteca colours across Melteca Standard, Jumbo and Hi-Gloss ranges. The new Standard decors take inspiration from international ‘light & bright’ colour trends. Dark organic timber tones, on-trend around the world, are reﬂected in our new Woodgrain decors. Look out for our new Melteca catalogue and updated folder artwork. Merchandising started in November for areas of New Zealand at Alert L2. Check out our website at www.laminex.co.nz for more information and for samples!

WINE CABINET *

Thanks to everyone who participated in our recent customer survey. It helps us to prioritise and focus on the key areas we need to improve. We appreciate the opportunity to listen to feedback on how we can better serve our customers.

in to win a Wine Cabinet

Scan to sign up to Fisher & Paykel’s new Trade Resources and be valued at $5,729.

We know collectively this is the busiest time of year and it’s been great to have so many customers ordering online after registering at Laminex.co.nz/e-commerceregistration. We also appreciate so many customers consolidating, rather than making several small orders, as it’s more eﬃcient and productive. As we head into the festive break, I’m reminded of the Wellbeing session with Mike King at the Master Joiners Conference in March. He urged us to take care of our own mental wellbeing and that of our family, friends and workmates. One of the most powerful things we can do is check in with our team - take time to listen to each other and know it’s ok to ask for help. Enjoy your festive break and we look forward to working with you all in 2022!

T&Cs apply. Be among the ﬁrst to

hear about new product releases and

Mike Arthur General Manager Laminex New Zealand

other trade speciﬁc information.

JOINERS Magazine December 2021 page 15

“it is a superior and robust product that wears, cleans and looks better than any other product on the market”

Cabinetry: Laminex™ Acrylic Panel Pitch Black. Design & Build: Rabbitte Joinery. Photography: Florence Charvin Photography

Laminex ranges expanded Laminex™Acrylic Panel & Laminex™ Woodgrain increase choice To ensure you have the best possible selection of product and decors Laminex New Zealand™ has recently expanded its popular Laminex Acrylic Panel range to include a 26mm panel. They are also launching 31x1mm ABS and 31x1.2mm laser, to edge these sheets. T h e L a m i n e x Wo o d g r a i n Collection range will also be available in 25mm panels with matching 31x1.2mm laser edgetape for all decors and 31x1mm ABS edgetape. Laminex is building stock of both ranges now, with all decors available by the end of January. The expansion to oﬀer a thicker version of the current 18mm oﬀer is being welcomed by customers who share positive feedback on why they prefer working with Laminex Acrylic Panels and Laminex Woodgrain Collection.

“Laminex Acrylic Panel is our favourite product to use, it's what runs through our factory consistently. The luxury point of diﬀerence it provides for our clients from a standard colour board range, coupled with the durability is a win-win. It's also great to finally have an option to revert to for dark kitchens without fear of complaints in the future. Durable, aesthetically pleasing, giving our kitchens that next level finish.” Ahmad Zammit, Creative Kitchens & Stone, Taupo.

“I have been in the kitchen manufacturing industry for 18 years and when it came to choosing a product for my own kitchen in our new house it was an easy choice to go with the Laminex Acrylic White Linen.

JOINERS Magazine December 2021 page 16

With 1mm laser edging, it is a superior and robust product that wears, cleans and looks better than any other product on the market!” Ben Page, The Kitchen Centre, Auckland.

“Reilly Joinery has been using the Laminex Acrylic and Woodgrain range of panels ever since they were introduced to the market. We've never had an issue with these products and get regular feedback from customers that they are always happy with the finish on the board. We have no problems regularly recommending them to our clients.”

“The large sized acrylic panels made it easy to work with for a large reception area. We also find the laser edging creates almost an invisible and clean join. A high-quality product.” Frank Tong, Frankco & Simon Furniture, Auckland.

Andrew Reilly, Reilly Joinery, Feilding.

For more information about Laminex Acrylic Panels and Laminex Woodgrains or to order samples, visit laminex.co.nz.

New decors across our range!

774522531

10 Year Warranty

Visit laminex.co.nz or contact your Laminex Business Partner

Dulux colour matched

JOINERS Magazine December 2021 page 17

Handles form & ﬁnish

Katalog p.24

Halliday Baillie p.21

The sheer range of styles and finishes available means handle selection causes as much comment and uncertainty as any component within the kitchen. We aim to make that selection a little easier for you and your client with a look at some of the current best sellers and recent innovations from our leading handle suppliers.

JOINERS Magazine December 2021 page 18

JOINERS Magazine December 2021 page 19

H21 Handle Collection from A carefully curated collection of top quality decorative hardware in a range of modern forms and ﬁnishes. View the latest catalogue at www.hafele.co.nz or scan the QR code below with your phone camera to view the full range.

H1970

H1960

H1910

H1915

H1925

H1930

H1715

H1955

H2155

H2170

H2175

H1920

H2120

H2195

H2110

H1935

H2135

H2140

H2125

H1950

H2130

H2180

H2185

H1965

H2115

H2190

H2145

H1710

H2150

H21460

H2165

H1725

JOINERS Magazine December 2021 page 20 H21_handles.indd 1

17/11/21 1:40 PM

Pulls & extrusions from Halliday & Baillie (top left) HB675 flush pulls Made in NZ. Suitable for drawers, cupboards, hinged and sliding doors. Available in 12 different finishes. Project: Hahei House Architect: Paul Clarke Studio 2 (Bottom left) HB2240 aged brass pull handle H&B brass pull handles made in NZ. Available in 4 different finishes and various lengths and profiles. Interior Designer: Rose Schwarz Photographer: Samuel Hartnett

HB 370

HB 375

HB 382

HB 385

(top right) HB385 anodised bronze Continuous drawer extrusion made in NZ and sold in 2m and 3m lengths. Available in 6 different profiles. Project: Waimauku House Architect: LTD Architectural Interior Designer: Renelle Gronert Photographer: Tiffiny Hodgson (Bottom right) HB1470 flush pull Manufactured in NZ from solid brass the HB1470 is ideal for large sliding doors. Available in 12 finishes.

HB 380

HB 387

hallidaybaillie.com

™

Designed and manufactured in New Zealand

Halliday & Baillie offer an extensive range of continuous drawer extrusion, brass pull handles and cabinet handles made in New Zealand, Germany and England. Please contact us on 09 358 1172 or louise@hallidaybaillie.com

JOINERS Magazine December 2021 page 21

NEW: FIT HANDLE 100% DESIGNED & MADE IN ITALY

GRAMMICHELE

VECCHIO

ALBA

CAPRI

HEAD OFFICE & WAREHOUSE: Northgate Business Park, 22 Hood St, Wellsford 0900 SHOWROOM BY APPOINTMENT & WAREHOUSE: 4 Morse Rd, Wigram, Christchurch 8042 CALL FREE 0800 852 258 FAX FREE 0800 852 259 EMAIL sales@ﬁt-nz.co.nz www.ﬁt-nz.co.nz JOINERS Magazine December 2021 page 22

COLLECTION 20 RANGES ON FIT’S WEBSITE NOW

AFFARI

RESEGONE

RI ALTO

MIL ANO

FIT HANDLES catalogue available from the Resource Download page at [[[ ƼX R^ GS R^ or contact us to order hard copies JOINERS Magazine December 2021 page 23

handle pedigree from Katalog

Ona

Graf

Peak

The entire range of Katalog handles can be viewed in their showroom at 15c Williamson Ave, Ponsonby, Auckland

JOINERS Magazine December 2021 page 24

TGV

Premium wall lining

Engineered by Juken New Zealand, Triboard TGV is a three-layered panel, with a wood strand core, sandwiched between MDF outer “skins”. The result is a clean-lined panel that has great resistance to impact. The dimensionally stable core provides superior screw holding ability, and the tongue and groove system allows for fast and easy installation. For more information go to jnl.co.nz

scan me to learn more

JOINERS Magazine December 2021 page 25

Peter Hay Kitchens makes next move new edgebanding technology from HOMAG Group In forty eight years of operation Peter Hay Kitchens have always been at the forefront of the New Zealand kitchen manufacturing industry in the development of new processes and the use of technology. The recent purchase of three edgebanding lines from German machinery supplier HOMAG Group including the latest airTec technology has continued that tradition, keeping the company in touch with the marketplace and more importantly, expanding on their journey of creating the most advanced Batch One processing line for cabinet production, a process that started back in 2015. Bob Nordgren from JOINERS Magazine spoke with founder and owner Peter Hay and his Sales and Marketing Manager Karl O’Hanlon about this next step in the journey and what these edgebanding lines mean for Peter Hay Kitchens.

“The nature of the kitchen business has changed. We saw that back five years ago when we went through a major change in production theory: the move to Batch One production which enables us to eﬀect large volume manufacturing of a one oﬀ product thereby meeting the emerging demand for customisation but at an economic cost.” says Peter.

Peter Hay in his kitchen.

JOINERS Magazine December 2021 page 26

“The move to HOMAG Group with the three new edgebanding processing lines is a signiﬁcant next step: it allows us to keep pace, but more importantly expand on our 4.0 project which we see as market leading.” explains Peter. “We have invested a lot over the last few years but we have achieved a lot as well. We believe what we are doing is the right thing for this business, that’s why we bought not one, not two but three of the latest in edgebanding production line machines.”

The attitude and approach to this business is impressive as Peter comments “At Peter Hay Kitchens we have a great group of people developing and deploying this pathway forward. We all understand kitchens, where they are heading and how we ﬁt into that. Technology, automation and software play an important role in that while the move to HOMAG Group brought synergy through not only factory processing but a strong connection through the integration of the Imos software that runs the design and production planning as well.” One of that team is Karl O’Hanlon, Sales and Marketing Manager. Peter Hay Kitchens is the biggest business of its kind here in New Zealand. Operating from their 10,000 square metre site in the Auckland suburb of Manukau it produces up to a thousand kitchens a month. Karl comments “We have always struggled

With intelliDivide cutting optimization, the employee can define an individual dimension that specifies the size from which an oﬀcut should be reused.

Less material more sales New features for cutting and nesting

for benchmarking ideas and theories here in New Zealand as the scale of the business sets it apart a little. Because of this we have often looked overseas however I believe where we are now is truly world class.” Peter adds “It’s amazing how far we have come, but also where we are heading. It really is exciting and its that excitement that pushes the team and provides them unique opportunities to work on pathways forward which are not always possible in a lot of businesses. The funny thing was, when we sat down and finally made the purchase decision, it was those things that stood out with HOMAG Group as well.” The objective has been to network the entire production process from board to finished product, to make it a more efficient, successful business. “HOMAG Group, in addressing the production issues we faced were genuinely interested in getting the process right: they bought new ideas to the table. This is these days an ‘intelligent” business where the efficiencies and gains made from automation for example are balanced against the realities of running a business of real size.” comments Karl. This next step for Peter Hay Kitchens begins with the arrival and installation of the three edgebanding lines in the coming months. We will check on progress in a later issue. 

Where do joinery and carpentry businesses lose the most time? Where is the most potential to save material and thus money? HOMAG has looked at these questions intensely. The result is practical solutions that make manual cutting and nesting processing more comfortable and that save more material Reusing offcuts In the intelliDivide cutting optimization, the employee defines an individual dimension that specifies the size from which an offcut should be reused. This offcut can be registered as available material with a simple click in the app. It is then included in the next optimization of the cutting patterns. Practical: the cutting assistant prints a special offcut label with all relevant information directly. This ensures that the offcut is clearly labeled and easy to find again. Overview of the panel stock The ‘Cutting Production Set’ now allows the user to manage both the stock location and the panel stock, including offcuts. As soon as a cutting pattern has been transferred to the tablet at the saw, the material required is reserved. Once a job has been processed, the assistant automatically deletes the panels used. An individual minimum stock level for each panel type informs the operator in good time when material needs to be reordered.

More flexibility with strip cutting The assistant also supports those who cut their panels into strips first. The operator sees a graphical display of how wide the strips should be cut. Each strip can also be given a separate label, thus preventing them from being mixed up. The operator can therefore cut a large number of strips first and then process them later. Longer interruptions or continuing work the next day are no longer an issue. Nesting assistant: Reduce costs and increase efficiency The new ‘Nesting Production Set’ brings the advantages of the cutting assistant to your nesting machine. The assistant supports you in the automatic calculation of your nesting patterns. The optimization software places the individual components in the nest as close to each other as possible. This allows you to reduce material consumption and save costs. At the same time, you print an individual label for each nested part. This ensures that each workpiece has all the information required for the subsequent processing. The set is the ideal entry level solution for labeling your components and is perfect for retrofitting label printing on HOMAG nesting machines. You can thus create the basis for integrated processing data in your joinery during the nesting process. 

JOINERS Magazine December 2021 page 27

What’s in a name? The name Toitū was the result of a brainstorm at the company’s sales conference and was enthusiastically supported by the company’s manufacturing manager and a key account manager who represent diﬀerent iwi – and ensured there was consultation with iwi around its usage in this context. Toitū has several interpretations, including 'enduring', 'untouched', 'kept pure', 'protected' – and also 'sustainable'. Toitū NZ coloured rimu mis-match Aotea Centre wall panels.

New veneer offer emulates the look of solid timber Prime Panels has introduced a new veneer range which meets the growing demand for the solid timber look but at the same time satisfies architects’ requirements for more sustainable timber options. The new Prime Toitū Veneer range uses mis-matched leaves to create a stunning planked eﬀect. It makes it easy and more affordable to use veneer panels, especially in larger scale commercial projects. The Prime Toitū Veneer range includes six NZ native veneer options along with American White Oak, American Walnut and Macrocarpa. Ve n e e r C a t e g o r y M a n a g e r for NZ Panels Group, Johnny Dobbyn says that with no need

for matching leaves or panels, the irregularities, knots and beauty of natural timber are brought to the forefront. “Due to the mis-matching of leaves considerable variation between panels will occur and is what architects are increasingly seeking.” For best eﬀect, he suggests they are used on large-scale cabinetry and for wall and ceiling panels. “With the introduction of Toitū, it adds a whole new level of efficiency by using even more of the tree, and at the same time celebrating the look of the whole tree, with all its complex colours and textures.” “While veneer has always been a far more sustainable option than

JOINERS Magazine December 2021 page 28

solid timber, with a .6mm layon going more than 20 times further, Prime Toitū Veneer uses more of the tree, showing greater respect or mana to the whole tree, which is fantastic,” says Johnny. As you'd expect, all Prime Toitū Veneer panels are from certiﬁably sustainable sources. But the added advantage of using any of the NZ Native Toitū veneer panels is the ability to track back to the trees they came from with the company’s world-leading Track my Tree initiative – a ﬁnalist in the Sustainable Business Awards. All Prime Toitū Veneer panels carry Environmental Choice NZ accreditation and come in panels sizes up to 2750mm x 1220mm depending on the MDF or plywood substrate chosen. American White Oak in both

Crown and Quarter Cut is also available at 3050mm long. "This new range of veneer panels oﬀers a diﬀerent look for our local architects, designers, joiners and end-users,” says Johnny. “Each plank of Toitū is different and should be celebrated as such.”

www.primepanels.co.nz

Keep it real ...and interesting. Emulating the look of solid timber, Prime Toitū Veneer is an exclusive range of timber veneer panels that have been individually hand-crafted to create a stunning planked effect. Credit: Kitchen by Gunnar Friese, Hewe Architectural Cabinetry. Photography: Jamie Cobel.

Prime Toitū Veneer will add huge impact to any interior project, especially wall and ceiling panels and floor to ceiling cabinetry. Prime Toitū Veneer represents the sustainability of these unique timber veneer panels where 900 square metres of veneer can be made from one cubic metre of solid timber. All our NZ Native veneer species have Track my Tree codes and our American White Oak, Walnut and Macrocarpa panels are sustainably sourced. All have Environmental Choice NZ accreditation.

0800 477 463 / primepanels.co.nz JOINERS Magazine December 2021 page 29

Saws

SCM Nova si400 panel saw

panel saws, beam saws, hybrid saws

Drill bits have taken over many of the functions of the saw blade in processing panel and solid timber, but sometimes the saw remains the best option. We look at a couple of diﬀerent examples of recent saws purchases and find they can provide both a general purpose cutting tool around the factory as well as the best solution to specific cutting requirements.

Accuracy was a key reason for Firman Joinery when they recently purchased a new panel saw. We were looking for something that enabled us to take material straight from the saw to assembly.” - p.38

Considering the many advantages of beamsaws such as productivity, ease of material handling and accuracy it is surprising they aren’t more common in NZ workshops - perhaps the Format-4 kappa automatic from Felder can changes that - p.36 JOINERS Magazine December 2021 page 30

„WOOD IS DIGITAL, ARE YOU?“

Digital tool for the woodworking industry

Launching in Australia

The registration has started. Do you have your tapio account? HOMAG Australia Pty Ltd | Tel: +61 2 8865 2700 | Email: sales-australia@homag.com NSW Sydney, 6-8 Tasha Place, 2148 Marayong, Australia

JOINERS Ma Magazine December 2021 page 31

It is a very cost eﬀective and time eﬃcient saw when doing the same thing to a lot of panel.

A new SCM Gabbiani P recently installed at Savory Group.

saws for all reasons When it comes to cutting panel or solid timber SCM have a saw to fit most requirements and production levels. We spoke to three recent buyers of different SCM saws, a beamsaw, a panel saw, and a hybrid of the two, and found that while they were purchased for different reasons the results were the same, efficient cutting of panel and happy owners. Savory Group Auckland based building company Savory is a large construction firm whose work covers both build and fit-out, a lot of it in the commercial sector, a lot of it requiring a beam saw. Recently they decide it was time to replace their existing one. “Our old saw had done its time it was actually run on a windows 98 operating system,” says Production Manager, Greg Burkett. “It had performed well but was becoming too outdated, prone to break downs and replacement parts were getting difficult to obtain. Our saw doesn’t get used solidly all day but we need it there when we have the right job.” “When looking for a replacement we needed something that pretty much did the same thing, which was to efficiently cut large runs of components. Our selection was narrowed to a couple of companies whose range of saws and service

suited our requirements and in the end we purchased the SCM Gabbiani from Machines R Us, for several reasons. “We had had good experience with John Fleet and Machines R Us in the past, and they had a beamsaw in the SCM Gabbiani P which was ideal for our use and volume requirements, ﬁnally it was also in our price range. “It is a very cost effective and time eﬃcient saw when doing the same thing to a lot of panel. We generally use it for squaring up large quantities of sheet material such as ceiling tiles or cutting sheets of ply for wall linings. Depending on panel size we will cut up to 4 sheets at a time “It is the ideal saw for us. Easy to set up, easy to change blades, easy to adjust the scribers, it’s a nice machine.”

JOINERS Magazine December 2021 page 32

The SCM class SiX panel saw at Masterwood Joinery.

Masterwood Joinery Masterwood Joinery in Cromwell are known for their award winning kitchens and know the importance of having the right machinery options for each part of the manufacturing process to achieve the optimum result.

Their machinery include various CNC and edgebanders and also a recently purchased SCM sliding table saw. Operations Manager, Dave Wilson comments on the reasons behind the purchase and what they use it for. (continued overpage)

SCM L’invincible SCM Gabbiani vsi

SCM solutions for all levels of production

SCM Class px 350i

SCM Nova si 400

SCM Gabbiani a 3

SCM Gabbiani g 2

606D Rosebank Rd, Avondale, Auckland, New Zealand

www.machinesrus.co.nz l 09 820 9486 JOINERS Magazine December 2021 page 33

Saws for all reasons (cont)

SCM vertical panel saw Gabbiani vsi.

Minimum space Maximum performance SCM further re-confirms its presence in the beam saws sector with an even wider range of technological solutions suited to all market ranges and every panel processing requirement. The latest new entry is the result of a collaboration between SCM and an industry leader and comes in the range of “gabbiani vsi” vertical panel saws. It is a complete range of models, 100% "made in Italy", developed to meet the different configuration needs and deal with every kind of production requirement. The range offers numerous advantages. •

Reduction in space taken up on the factory ﬂoor: SCM's new vertical panel saws are functional and compact and can be easily placed into any work space, even the narrowest ones, while still providing maximum cutting performance.

•

Greater power and resistance over time: the new "gabbiani" range is powerful and sturdy, and has a stress-resistance capability far superior and longer than that of standard machines in its category. This is thanks to the special frame that is assembled with electro-welding.

•

Several models in the range for a better price/ performance ratio: you can pick the vertical panel saw that best suits your production needs. There are numerous options: without scoring unit or with paired scoring unit with 2 saw blades or, moreover, with the addition of an independent motor with mechanical insertion. The advantage is identical: constant topquality performance at a highly competitive price.

•

Great versality: The “gabbiani” vertical panel saws can be used to cut diﬀerent types of wood materials.

•

Speed and precision, a feasible duo: the "gabbiani" vertical panel saws allow for one or more panels to be cut simultaneously, but always with maximum precision. Some of the diﬀerent models are able to make particularly precise cuts, others are more suitable for making pre-cuts that will be completed by sizing edge banders or cnc machining centers. 

JOINERS Magazine December 2021 page 34

SCM Class PX 350i in action at Mr Shelf in Tauranga.

“We choose SCM because we believe they are the best saws on the market. We bought this particular one, a Class SiX mainly because it is able to do very precise panel length 45 degree angles for our cut-back fronts. We also use it day to day to cut panel to size and it is easy to change the blade to rip timber when we need to, but its ability to cut on the angle was our main requirement. It actually does 45 degrees both ways, which is useful. “It’s easy to use and very precise, with the automatic fence setting you simply key in the measurement and it does it - bang on. “Dealings with Daniel and the team at Machines R Us was very pleasant, great technicians and training was exactly what was required. Great saw, very happy with the purchase.”

saw carriage moves when cutting and the operator can work from both sides. But the main beneﬁt for Mr Shelf was the blade tilts to 45 degrees. “With our business getting more mechanised we were not using the beamsaw to cut such volume anymore and this machine provided the ability to cut angles as well,” says manager Russell Reardon. “This way we have the beamsaw capability when we want it but are able to do angle cuts as well and the changeover and set up from one to the other is very quick and easy. “From ordering to installation and subsequent use everything has gone very smoothly, no issues. It was a good buy and a very good machine to use.”

Mr Shelf Mr Shelf in Tauranga specialise in storage cabinets and shelving systems for the residential, commercial and retail sector and as such cut a lot of sheets of panel, until recently on a beamsaw. When it came time for a replacement they opted for a SCM Class PX 350i, a type of hybrid panel saw with features found on both a beamsaw and a sliding table saw. The material stays still, the

SCM NZ Agents www.machinesrus.co.nz

DRY Dust Filtration

WET Dust Filtration

If you are cutting or processing Wood or MDF, you should look at our T series or RAF series Dust Extractors

If you are cutting or grinding Stone or Composites, you should look at our WET WALL solutions

T Series Filters

RAF Filters

Wet Walls

Wet Scrubber

AIRTIGHT modular extraction systems have proven to be    

Very reliable - continuous performance with low down time Very low energy use - meaning you save power all year round Very low maintenance - saving cost oﬀ your bottom line Very good investments - do it once, do it right. Do it AIRTIGHT.

Call AIRTIGHT SOLUTIONS on 0800 AIRTIGHT - We have an AIRTIGHT Solution for you 

JOINERS Magazine December 2021 page 35

Introducing

Format-4’s kappa automatic classic series of beamsaws Considering the many advantages of beamsaws such as productivity, easy material handling, accuracy and safety to name just a few, it’s surprising beamsaws aren’t more common in New Zealand workshops. Perhaps the face-lift range of Format-4 kappa automatic classic f beamsaws will change that.

At just over $100K for the base model, kappa automatic classic beamsaws are very affordable for smaller and medium sized businesses. The classic model has a generous basic specification: cutting lengths of 3200 or 4300mm, two moveable support tables with air cushion function and a solid steel fence for an exact right angle cut when cross-cutting.

For perfect, chip-free results, the main saw blade is equipped with a 7.5kW motor, and a 68mm saw blade projection (with a 320mm sawblade) offers great bookcutting ability. An intuitive 15” touchscreen ensures quick and simple control of the machine.

tables are replaced by solid fully automatically controlled scissor lifting tables. This assists with increased eﬃciency and greatly reduce the operator’s eﬀort.

Plenty of options are available across the range including the new innovative front lifting table system where the standard

For more information call Jacks on 0800 522 577 or Email sales@ jacks.co.nz

Like us! Follow us! Join us!

...being Master Joiner connected is a nationwide connection of networks.

...membership grows your personal brand. Recognition by industry peers is the greatest compliment.

Chat to a Registered Master Joiner near you and find out why our members - stay members!

JOINERS Magazine December 2021 page 36

....membership is intuitive branding alignment. It just makes sense!

Concept Plus 350

Combining the versatility of a Panel Saw ZLWK WKH EHQH¿WV RI D %HDPVDZ •

High quality clean cuts with guaranteed repeatable accuracy

•

Large ergonomic support area for easy handling of large sheets

•

Extremely safe with blade completely enclosed during the cutting process

• •

6PDOO RSHUDWLQJ IRRWSULQW OHVV WKDQ Ҁ RI D SDQHO VDZ High productivity - cut multiple sheets simultaneously %ODGH WLOW WR IRU PLWUH FRPSRXQG PLWUH FXWV DQG JURRYHV IRU SDQHOV DQG VROLG WLPEHU Quiet operation and excellent extraction channels

www.jacks.co.nz | 0800 522 577

JOINERS Magazine December 2021 page 37

“We were looking for a quality cut – something that enabled us to take material straight from the saw and assemble it, every time.”

Gary Firman, Nathan McLeod (saw operator), and Hamish Kane with their new Felder panel saw.

K940 - innovation and accuracy Set up by Gary Firman 30 years ago, Firman Joinery is the largest joiner in Oamaru, with 15 staﬀ and large, new premises on the city’s Northern boundary. Hamish Kane joined the Firman team in 2000, eventually joining Gary as Co-owner 12 years later. Today Firman Joinery have a history and reputation for craftsmanship that extends well beyond Oamaru and deep into the Central Otago region. Working almost exclusively with a regular group of building companies in the area, Firman’s are well known for their quality work in high-end residential joinery, with plenty of Master Joiner awards in their showroom to prove it. It’s easy to see how the stack of awards came about, because Firman Joinery’s staff are all trade qualiﬁed or in the apprentice

programme – even the project managers/detailers in the oﬃce have a trade (builder, joinery). With such a high level of skill available then it’s no surprise that quality comes as standard from the Firman Joinery team. But good skills need to be paired with good tools, and Firman’s Felder panel saw is certainly a good match. Felder’s K940 X-Motion, supplied by Jacks, oﬀers all the renowned features and innovations of the Austrian woodworking group’s panel saw range. The K940 has a 3.2 metre sliding table with Felder’s “X-Roll” system - a precision guiding system that handles maximum loads without compromising the smooth and accurate movement of the table. Named after the ‘X’ shaped configuration of the roller bearings, the X-Roll system prevents wear, eliminates maintenance and provides playfree accuracy over the lifetime of the saw.

JOINERS Magazine December 2021 page 38

Also maintenance free, the ‘EasyGlide’ saw unit tilt mechanism features a highly durable synthetic material that sits between the cast iron guides. This eliminates the need for grease to lubricate the guides and is therefore completely unaﬀected by dust (not that you see any in Firman’s near spotless factory!). Easy-Glide provides smooth and precise tilting of the saw unit over the long term. “Accuracy was a key reason for buying the Felder,” says Hamish. “We were looking for a quality cut - something that enabled us to take material straight from the saw and assemble it, every time.” With a powered rip-fence controlled from an overhead touchscreen panel, the K940 X-Motion provides powerful, fast and programmable cutting. “For the right job, the overhead controller and powered fence certainly saves us time” says Hamish. “And we’re getting repeatable results and consistent quality.”

A 7.35kW (10hp) motor means the K940 X-motion is equally at home working with panel or solid timber – an important factor given Firman Joinery’s wide variety of work, from high-gloss panel kitchens through to recently completing a complete house-lot of solid timber joinery for a 900 square metre build. With Oamaru and the wider Central Otago’s residential market booming, and an order book just about to stretch into 2023, Gary and Hamish are conﬁdent about Firman Joinery’s future. “I’ve never seen Oamaru so busy in my lifetime” says Hamish. “We’ve been lucky in the South Island - even at Level 3 we were able to work nearly as normal.We’ve needed to because business is booming.” 

www.leitz.org

RazorCut and RazorCut PLUS circular sawblade Perfect edges during panel sizing

Cut at Full Speed with RazorCut Circular Sawblades In furniture production, high feed rates and perfect machining results are required for sizing individual panels. Especially when support materials and coatings are constantly changing. RazorCut and RazorCut PLUS circular sawblades make it easy to cut panels in finish cut quality at high feed rates. A wide variety of panel materials and surfaces can be processed perfectly - regardless of whether the saw cut is edged later or remains unprocessed.

Your benefits due to...

AT A GLANCE

Perfect edges, finishes free of marks, high feed rates

Special cutting edge geometry Irregular tooth pitch Use in combination with DP scorer recommended Can be resharpened several times For processing individual panels or flat panel stacks up to 60mm thick Available from stock Cutting material HW

Finish cut quality and perfect cutting edges Consistently high machining quality RazorCut PLUS: Best cutting quality due to special edge geometry, smooth running and suitable for production lines with high part outputs due to long tool life A tool for a wide variety of materials Suitable for sizing panels in batch size 1 production Best results even with matte, glossy and structured surfaces Advantages for people and the environment Can be resharpened several times due to large resharpening zone High tool life thanks to wear-resistant cutting material and vibration dampening Less noise and vibrations using irregular tooth pitch and adapted gullet areas

Welcome to our Team We would like to take this opportunity to introduce you to our new Leitz ANZ team member, Kane Mayo. Kane is joining us as our Service Representative for the greater Auckland region. Kane previously worked as a joiner in the timber industry for the last 18 years and has a huge passion for woodworking and all the tools that go along with it.

+50 % -4 Db(A) -100 % BETTER PRODUCTIVITY*

LESS NOISE*

FINISH-PROCESSING IS NOT REQUIRED*

*In comparison to conventional circular sawblades

RazorCut circular sawblades: One cut is enough!

Leitz Tooling Systems Pty Ltd AU NZ

@leitz_aunz Leitz Tooling Systems Pty Ltd AU NZ

Freephone: 0800 578 665 email: sales@leitz.co.nz

JOINERS Magazine December 2021 page 39

DST 180LHD

a new range of sinks

the DST range Introducing the latest addition to the Burns & Ferrall range, the DST contemporary sink and drainer. The DST has been designed to offer complete functionality, and a stunning minimalistic design that will complement the busiest kitchen. The range has arrived into stock and offer many amazing features and benefits to enhance thew way you use your kitchen. The flat draining tray is on a gentle gradient, which drains water directly into the sink. The large capacity bowl is due to the unique 420mm deep sink (front to back), and the tight 10mm radius corner to give maximum bowl capacity, allowing for larger dishes and backing trays to be cleaned and soaked in the sink. The 3mm knife edge divider is a unique feature on the DST double bowl. The 3mm divider also helps maximize space, and avoids the annoying splash when pivoting the tap from one sink to the next.

The DST is fabricated, hand made sink, which can be installed as an Under Mount into any solid surface material, or installed Top Mount. The 254mm flat flange also allows for FLUSH mounting and is ideal for welding into stainless steel benchtops. An impressive designer, negative detail overﬂow complies with all regulation, and archives the 15L per min ﬂow rate required by the building code.

DST 180RHD

A special concertina roller mat is included with every DST model, and a full range of accessories are available for both models. The DST range is in stock now – contact you local Burns and Ferrall sales representative or contact our Customer service team on 0800 697 465 or sales@ burnsferrall.co.nz

DST 120

Your local Burns & Ferrall rep

Mary Boyle Auckland North 021 495 189

David Wignall Central NI & Wellington 021 856 605

JOINERS Magazine December 2021 page 40

Susan Rosewarne South Auckland 021 281 5218

Naomi Abraham South Island 021 731 579

www.burnsferrall.co.nz

NEW

AND IN STOCK NOW!

4 DM

These fabricated double bowls are available in topmount, undermount or weld in options. At a total width of 685mm and 15mm radius, these bowls come complete with 2 x 90mm waste and 1 x designer overflow - with left and right hand main bowl options, and with the same over all width, all you need to do is choose the size of the sink to suit! There is a full range of accessories available - get in touch today to find out more!

burnsferrall.co.nz | 0800 697 465 | sales@burnsferrall.co.nz JOINERS Magazine December 2021 page 41

Projumbo delights retail sector Since March 2021 Hutchco has been on a mission to grow the Projumbo colour match oﬀerings “We started out with a handful of colours to meet committed orders, and now 8 months down the track we have approximately 70% of our range covered” says Mark Leith Managing Director, he adds, “The demand for extra wide edging is growing, and to be able to produce this with minimal waste both economical for us and cost eﬀective to the end user.” As the demand grows, Technical & Marketing Advisor at Hutchco Tux Hika reached out to a couple of end users to see how Projumbo has delighted their clients. Hutchco has had a long history supplying edging to Auckland based Retail Dimension (RD). RD covers every dimension of retail and draws on 20 years’ experience to deliver custom retail solutions,

Hutchco have been committed to increasing the Projumbo colour match options - photo Tux Hika. from design, manufacturing to ﬁtout, signage and technology. Tux caught up with purchasing and production coordinator, Francesca Crowther at RD to talk about their experience to date with Projumbo edging. “I have taken it upon myself to order this where I have found it applicable. This

saves us significant costs in not only material but also in Labour” Francesca continues on to note the direct financial benefits she has seen for RD “ We don’t need to purchase additional sheets of laminate which can be very costly and the team don’t have to spend labour working the laminate”.

When asked who does she see as beneﬁting from Projumbo,“easy application for manufacturing and clean sleek lines [for the client]” adding “This product creates a seamless edge and consistent grain/pattern when clashing the length of the laminate limits this.”

match the look and feel Hutchco offers 5 design inspired edging finishes across a range of over 250 colour matches. Order samples today!

Timbergrain

Woodgrain

Matte

Hi-Gloss

JOINERS Magazine December 2021 page 42

Satin www.hutchco.co.nz

The jumbo edging gives us clean lines and a hardwearing seamless edge without the dark lines of some alternatives. Mark Crowhurst BBC

BBC Commercial used Projumbo edging for the Farmers fit-out at Sylvia Park in Auckland. Since 2007, the team at BBC Commercial in Tauranga have been providing commercial ﬁtouts, shop fittings and a range of tailored and versatile joinery solutions to businesses throughout NZ. Hutcho has serviced their joinery needs steadily for the past few years now, and the

introduction of Projumbo has eliminated some productivity and processing pain points notes Mark Crowhurst, Manger at BBC.

and a hard wearing edge” and adds “[Projumbo gives a] seamless edge as the alternative (laminate) leaves a dark line”.

Mark often specifies 55mm & 65mm Projumbo where he can and credits this by saying “The jumbo edging gives us clean lines

Check out some of BBC’s recent work at Farmers Sylvia Park.

Contact our Sales Manager James@hutchco.co.nz or customer services on cs@hutchco.co.nz to find out if Projumbo is available for your next project.

ACTIVE LID automatically opens and closes with bin motion

The Ultimate Hands Free Waste Solution.

PUSH TO OPEN compatible with electronic push to open systems

With Concelo, the smart Active Lid system opens automatically as the bin is opened. When combined with an electronic Push to Open system the user can simply drop waste into their Concelo bin without having to use their hands at all. For technical or sale enquiries, contact Hideaway Bins hideawaybins.co.nz / 09 426 7456

JOINERS Magazine December 2021 page 43

JOINERS Magazine December 2021 page 44

,W¶V LPSRUWDQW WR XV WR XQGHUVWDQG \RXU WDVNV DQG

6HUYLFHV

SURFHVVHV :K\" %HFDXVH D JRRG SDUWQHU SURYLGHV JRRG VXSSRUW IURP SODQQLQJ WKURXJK WR DVVHPEO\ ZLWK VHUYLFHV JHDUHG WR

:H VXSSRUW \RXU GDLO\ RSHUDWLRQV

\RXU QHHGV )URP GLJLWDO WRROV WR TXDOLW\ %HFDXVH WKDW·V

ZLWK FXVWRPLVHG VHUYLFHV WDLORUHG

ZKDW ZH XQGHUVWDQG E\ ¶SDUWQHUVKLS· 0DNH \RXU MRE

WR \RXU SURFHVVHV

HDVLHU ZLWK RXU SURGXFWV DQG VHUYLFHV

2UGHU 0DQDJHPHQW 'LG \RX NQRZ .LZLV PDNH XS WKH ODUJHVW SHUFHQWDJH RI XVHUV IRU WKLV RQOLQH WRRO ZRUOGZLGH" ,W¶V VRPHWKLQJ ZH DUH LQFUHGLEO\ SURXG RI DQG WKH DXWRPDWLRQ RI JHWWLQJ RUGHUV LQWR WKH V\VWHP IDVWHU KHOSV RXU WHDP RQ WKH JURXQG WR JHW PRUH RUGHUV RXW WKH GRRU HYHU\ VLQJOH GD\ ,W IUHHV XV XS WR XSGDWH (7$¶V RQ WKH V\VWHP ZKHQ ZH JHW GHOD\V IURP WKH SRUWV PHDQLQJ \RX FDQ ORJ LQ DQG ILQG \RXU PRVW XS WR GDWH OHDG WLPH LQVWDQWO\

3URGXFW &RQÀJXUDWRU 1HZ =HDODQG¶V PRVW XVHG ( 6(59,&( 4XLFNO\ DQG HDVLO\ ILQG ILWWLQJ VROXWLRQV DVVHPEO\ LQVWUXFWLRQV RU SODQQLQJ LQIRUPDWLRQ 3URGXFW &RQILJXUDWRU ZLOO KHOS \RX WR VHOHFW WKH FRUUHFW KDUGZDUH FRPSRQHQWV IRU \RXU MRE 6DYH \RXU SURJUHVV WR ´0\ OLEUDU\µ RU VHQG \RXU SURGXFW FRQILJXUDWLRQ VHOHFWLRQV GLUHFWO\ WR 2UGHU 0DQDJHPHQW WR SODFH DQ RUGHU IRU HYHQ JUHDWHU HIILFLHQF\

&DELQHW &RQÀJXUDWRU 7KH EHVW ZD\ WR SODQ RUGHU DQG PDQXIDFWXUH FDELQHWV ZLWK %OXP ILWWLQJV 8VH WKH ´0\ SURMHFWVµ IXQFWLRQ WR VDYH DFFHVV DQG PDQDJH SHUVRQDOLVHG FRQILJXUDWLRQV DQG EHFDXVH LW¶V DQ RQOLQH VHUYLFH WKHUH¶V QR QHHG IRU PDQXDO XSGDWHV 3URGXFH SDUWV DQG FXWWLQJ OLVWV SURGXFWLRQ GUDZLQJV DQG &$' &$0 GDWD ZLWK MXVW D IHZ FOLFNV

H VHUYLFHV EOXP FRP

JOINERS Magazine December 2021 page 45

Sensys by Hettich

hinges While looks are important, function is critical and durability is necessary, a big plus for cabinetmakers when it come to hinges is that they are simple to fit and easy to adjust. We look at options from leading suppliers that cover all these criteria and more.

Blum

JOINERS Magazine December 2021 page 46

Hafele

Fit

Salice Silentia+ Perfect and constant closing from Silentia+ is also equipped with an innovative switch to delay the decelerating action. The activation of this switch allows the ideal decelerating strength to be achieved for all door sizes.

SWITCH POSITION + (30°)

Silentia+ allows a perfect and constant closing of the door in any condition, use and application. The innovative soft close technology guarantees excellent performance to the complete range of hinges. Silentia+ includes numerous technological elements and maintains the aesthetics of the hinges of the ﬁrst generation.

SWITCH POSITION - (10°)

The next generation. Integrated soft close technology with two silicone oil dampers. The two integrated dampers guarantee an exceptional regularity of the decelerating strength providing a perfect closing to any kind of door under any conditions.

JOINERS Magazine December 2021 page 47

Onyx Black

An extensive range of Blum hinges are available in Onyx Black.

It's not just design; it's style. D

ark furniture radiates sleek elegance, inside and out. The global trend requires hardware that creates a visual impact without compromising on quality. At Blum, we stay in motion to move ideas. We have produced the onyx black hinge range to discreetly complement furniture and give your ideas and creations a greater scope for designing fine furniture. An extensive range of our hinges, such as the top-selling 110° hinge, profile hinge for thick doors, blind corner hinge or even our EXPANDO T hinge for thin doors, are available in onyx black. With built-in BLUMOTION, the product becomes even more attractive, with no extra protruding parts; simply flick the switch on the hinge boss to deactivate the BLUMOTION. To create seamless integration or visual impact in your cabinetry, order onyx black online at e-services.blum.com or find more at www.blum.com

JOINERS Magazine December 2021 page 48

One hinge - endless applications W

ith a 155° opening angle, the 0-protrusion hinge is ideal for use on doors with inner drawers and pull-outs, mitred fronts or double overlay carcase applications. The technology in the hinge arm pushes the door outwards upon opening, stopping binding where the door meets the carcase or allowing drawers to open freely without using a packer.

Zero protrusion

The 0-protrusion hinge is available with built-in soft closing BLUMOTION or unsprung to use with TIP-ON for handleless fronts and available in two ﬁnishes, including onyx black for dark interior design and visual impact without compromising quality. Find the full scope of use for Blum's 0-protrusion hinge within Cabinet Conﬁgurator or place an order within Order Management, both online at e-services.blum.com

Slim, sleek and streamlined A

VENTOS HF, HS and HL cover caps have been given a new look and offer a fresh design to the lift system ranges. Tailored to match the existing AVENTOS HK top cover cap, the new, linear appearance allows a harmonious design to be achieved in furniture. Along with a sleek new form, the entire AVENTOS range now offers a dark grey cover cap option to compliment the movement of dark fittings and interiors trending worldwide. Make a statement; pair light wood-look cabinetry with a dark cover cap for a bold design that stands out. Personalisation? Say no more! The removable plate on the cover cap can be embossed or printed with your company name or logo and can also be used on LEGRABOX drawers for exceptional hardware unity! Place your order for the new-look cover caps for AVENTOS online at e-services.blum.com for your upcoming projects, or contact your Blum Account Manager to learn about personalised branding.

JOINERS Magazine December 2021 page 49

Sensys Obsidian Black.

Sensys by Hettich the perfect connection for manufacture and design The award-winning Sensys hinge by Hettich is perfectly suited for creative interior cabinetry solutions of the highest quality. Proven performance in temperatures from 5 – 40 degrees, the proprietary design offers a broad range of applications. Day to day, that means that you have the biggest choice in what you create and how you create it when using Sensys. Sensys has among the widest soft-close on the market with the Silent System catching and pulling itself closed at 35 degrees. This wide soft closing angle sustains performance across non-standard applications such as thick doors and is discretely tucked within the hinge itself. To see all the possible applications, check out the ‘Hinges by Hettich – Sensys’ poster inserted with this issue. Installation Different installation methods available • Fast assembly hinges for maximum efficiency, requiring no tools • Push-in installation, otherwise known as knock-in • Screw installation • Expanding dowel installation. Choose the installation most compatible with your manufacturing processes.

JOINERS Magazine December 2021 page 50

Design Finish Choose from the classic nickel plated or obsidian black ﬁnishes for hardware that complements the wider design. Wide material choice for door fronts Sensys hinge applications include • Thick doors from 15-32mm • Thin doors from 10-16mm • Glass doors. This opens up the choice of possible door front materials, allowing experimentation and outside the box design. For example, tiny home or campervan applications may beneﬁt from lighter cupboard doors and Sensys for thin door fronts. Wide angle and zero protrusion With applications for zero protrusion doors to accommodate pantry stackers and blind angles for corner storage, Sensys is applicable to all common – and some less common – interior cabinetry requirements.

For all catalogue and purchase information visit shop.hettich.com. For supporting installation information visit HettichEnglish on YouTube, or the media library on our website.op

Hettich Sensys Hinge

We work behind the scenes to bring your living space together, creating the top quality hinges, drawer systems and sliding and folding doors you need for a truly luxurious interior. Every day, all over the globe, our furniture ﬁttings are creating extraordinary kitchens, bathrooms, and custom furniture with remarkable and durable results. www.hettich.com www.designwithhettich.co.nz

Hettich AvanTech YOU Glass Inlay Drawer

JOINERS Magazine December 2021 page 51

Salice & Fit Photo kindly supplied by Tim Lee at The Offcut of Auckland

enhancing living spaces together Pocket doors? Overhead lifts? Falling flap stays? Bifold gear? Soft close hinges? You know you can count on Salice’s Italian designed and made quality and on Fit’s service. Salice’s Pacta for horizontal surfaces.

ultipurpose spaces are where it’s at! This is a trend that began well before the pandemic that has literally plagued us for the last two years, but Covid-19 has fast-tracked the need of many households to maximise use of space and make existing spaces like kitchens, dining rooms, living rooms and bedrooms suitable for work and study. Good hardware, like that from Salice, can really assist in creating multipurpose cabinets and spaces. Pocket doors – currently the rock star of multifunctional spaces! Pocket doors pivot 90° to slide back inside a double walled cabinet, so walkways and light are not blocked when the area is in use. Salice’s Exedra pocket door is perfect for creating laundry spaces, work from home spaces, study spaces or appliance spaces within larger rooms or hallways. Suits doors 18030mm thick, 2200-2500mm high, 500-700mm wide. Vertical, horizontal and front adjustment all without removing door from cabinet.

Salice’s Wind with supplementary kit for extra wide doors.

Overhead lifts – EvoLift is the latest from Salice with options for single flap and folding flap doors in wood or with aluminium frames.Right or left kits, plus options for super heavy projects. And for a contemporary, compact look; the Wind range in white or satin metal black includes paired kits for 5 door weight levels plus a supplement for very wide doors. Creating horizontal surfaces like fold down desks tables? Salice’s Pacta is the falling flap door solution that is both robust and stylish – with no stays or cables needed! Everything you need in a paired kit, plus an extra support hinge is available for wider surfaces. Pacta is compatible with Salice’s magnetic push to open system too!

The Exedra pocket door showing the doors closed, partially open and fully pushed back inside the cabinet wall.

Salice Wind installed in the kitchen of Fit’s customer service lead, Henry Don.

And, of course, Fit carries a wide range of Salice soft close hinges. EvoLift kits for single flap doors and folding doors.

Contact your Fit rep, phone 0800 852 258 or email sales@fit-nz.co.nz to discuss your Salice hinge and hardware requirements. JOINERS Magazine December 2021 page 52

LIGHTING THE WAY DOMUS LINE™ SEH4 & AT6 LED STRIPS REUSE OFFCUTS!

-XEPMER HIWMKRIH -HIEP JSV [EVHVSFIW GEFMRIXW GVIEXMZI PMKLXMRK MRWXEPPEXMSRW

Options with double-ended cabling

AT6 (24Vdc) • • • • • • • • •

Premilled groove - 6mm x 6mm OR 7YVJEGI QSYRX ƼXXMRKW ERH 1 XETI TVSZMHIH 1MRMQYQ VEHMYW QQ 1E\MQYQ VYR Q 8VMQ MRGVIQIRX QQ -4 TVSXIGXIH 0)( Q ERH PQ ; Q Q ERH Q PIRKXLW 2S EPYQMRMYQ TVSƼPI SV HMJJYWIV VIUYMVIH

SEH4 (12Vdc • • • • • • • •

4VIQMPPIH KVSSZI QQ [MHI QQ HIIT 2S XETI EHLIWMZI SV GPMTW 1MRMQYQ VEHMYW QQ 1E\MQYQ VYR Q 8VMQ MRGVIQIRX QQ -4 TVSXIGXIH 0)( Q ERH PQ ; Q Q ERH Q PIRKXLW

2021 FIT DOMUS LINE™ LED LIGHTING PROJECT BOOK NOW AVAILABLE! New editions of Fit’s project books are now available. Contact us to order hard copies or download from the Resource Download page [[[ ƼX R^ GS R^

JOINERS Magazine December 2021 page 53

Michael Murray - Kitchen Inspirations

show your vision 3D presentation software VORTEK Spaces has been creating a bit of talk in the New Zealand design community lately. Easy to use and compatible with a wide range of popular CAD design software, Vortek Spaces enables designers to present their designs to clients in stunningly realistic videos and walk-throughs. We spoke to several early users who are finding the software particularly useful in allowing them to share their vision with clients and personalise their presentation. For kitchen designer Sydney Young from Matamata Glass & Joinery, Vortek Spaces is a great selling tool. “It allows me to present a new design and make it look like the clients home. It gives me the ability to easily show what I am trying to do and really helps with colour and material selection which can speed up the process considerably”. Sydney purchased Vortek in June last year and uses it alongside Cabinet Vision. “I found it very easy to pick up, some initial assistance from Joinery It and then an hour or so link up to Vortek in Canada gave me the basic operation and it was easy from there.” “It is a very eﬀective program, I simply import my design from Cabinet Vision and from there can change lighting or materials

as I or the client wish. I would probably spend a couple of hours on finishing my kitchen design but it is definitely worth it. In fact once you start you really get hooked it gets into your blood.” Cherie van der Poel, designer and director at Got It Made Kitchens in Te Awamutu has been using Vortek for the last 18 months and has found it a game changer for selling designs and concepts. She uses it with CabMaster software to produce 3D walk-throughs which are recorded and shown to clients. “Customers love its visual nature and it gives them the confidence to go with a design, they can see it and imagine themselves in that space. Not everybody is good at reading plans and Vortek saves time in getting ideas across. It makes a big difference to us in closing sales quicker.

“It is not as diﬃcult to learn as you might expect you can be up and running within a couple of days on basic designs and pretty specialised within a couple of months. The online assistance is very good although we haven’t needed to use it much as it’s pretty easy to work things out yourself.

“Colours and lightning are really good and it produces excellent high quality renders. I post renders on social media and get a lot of request from other designers as to what I am using. It works very well with Cabinet Vision, the transfer of ﬁles is very simple and any changes upload automatically, just like resaving a ﬁle.

“It’s great to have access to such technology in our industry - the future is the visual product it is huge for our industry and great that it is available to the joinery and kitchen industry without it being cost prohibitive for smaller users.

“The software has undergone a lot of development recently with an expansive 3D warehouse/ store where you can not only ﬁnd but also upload and develop components to achieve that personalised look for your client.

Michael Murray a designer with Kitchen Inspirations in Auckland has been using Vortek Spaces for four years in kitchen and cabinet design and appreciates its realism and its ability to easily makes changes on the ﬂy.

“The 3D walk-through video is very good. It really helps people to read the space, not everybody is necessarily very good at understanding floor plans and elevations whereas they instantly identify with the 3D visual. (continued over page)

JOINERS Magazine December 2021 page 54

Wood Coatings by Sherwin-Williams, Italy

Premium paint coatings for wood & glass from Italy Water Base & Polyurethane hard wearing protective coatings for wood professionals

SOLVENT & WATER BASE COATING SYSTEMS for Interiors STAINS Water Base & Solvent options GLASS COATING SYSTEMS Special effects & paints

DBNZ Coatings 6 Killarney Lane, Frankton Hamilton 3243 PH. 07 847 0944 EM. info@dbnz.co.nz

DBNZ Coatings

We’ve got NZ covered

JOINERS Magazine December 2021 page 55

www.dbnz.co.nz

You really are able to bring your design to life through the use of colour and realistic rendering. The walk-through is very impressive, it provides a real wow factor and instantly shows clients your vision.

Craig Hooper - Cooper Webley

Alexandra Riddell Niche Design Co

Cherie van der Poel - Got It Made Kitchens

Show your Vision (cont from previous page)

“I didn’t really have any tuition, a workmate showed me how to use it and oﬀ I went. It is pretty self explanatory but you do need an eye for lighting and angles.” Alexandra Riddell from Niche Design Co Ltd in Tauranga has used the software for several years with both Cabinet Vision and 2020 Design software and ﬁnds it builds on the existing software. “You really are able to bring your designs to life through the use of colour and realistic rendering. The walk-through is very impressive, it provides a real wow factor and instantly shows clients your vision. As a consequence we need

to do less concept work, clients are sold quicker because they can see how it is. “Very user friendly, a great asset for designers. For Daniel Billings from Maple & Stone in Hamilton, who began using Vortek Spaces alongside Microvellum in the middle of this year, the software works well with the bespoke nature of their business providing ‘visualisation’ for clients. “The realism is great and it is the easiest rendering software I have used. The direct communication channels with Canada are very useful when starting out and I like the way they are constantly updating their library to include NZ based products such as Laminex and Bestwood colours.

JOINERS Magazine December 2021 page 56

Craig Hooper from Cooper Webley in Nelson has used Vortek Spaces for three years and loves the programme. He works in Cabinet Vision then exports to Vortek for the final rendering and then client presentation. He enjoys the ability to make changes on the fly while talking and discussing options with clients. “It is very useful tool for selling directly and efficiently. Clients very quickly get a good feel for what we are doing in an environment they recognise. It is very easy to use, largely click and point based with a very easy to follow drop down menu. I can do a full blown render in 15-20 minutes and the beauty is, it is a live render, any changes are automatically updated to the original file - superb.

“Vortek are very client interactive constantly updating and supporting with more facilities and functions and lighting and design features. It is a very dynamic and powerful tool - I think of it as a portable showroom.”

Joinery It are New Zealand re-sellers and service providers for Vortek Spaces for more contact Phil Smith on 021 201 4450

More doors from Sage Doors Originally known for roller doors, and then Laseredge doors, Sage Doors is now branching out into more door options: presanded-paintable-profile doors. Paintable profile doors have been a much-requested addition to the Sage Doors’ range for a while; here’s a few reasons why you’ll want to use them: Short Lead Times Like all of our doors, we’re committed to keeping our lead time as short as possible. Our lead time for standard orders is 4 days. Pre-Sanded It’s important that your doors are ready to roll (err, spray!) when you receive them, so we do the sanding for you. They should be ready to send to your painter. Online Quoting & Ordering Our profile doors can be ordered and quoted online. Contact us for the tech specs so you know which profile you’re after. Pre-Drilled Like all our laseredge doors, our profile doors can be pre-drilled, either by sending through a Cabinet Vision/Microvellum file, or by entering in the drilling on our website when you place your order. Make it Your Own Because we like to be flexible with options, we do our profiles a little differently! You can order any face profile (USA State name in our range) with any edge profile option. For example, you could have the Arizona face profile with edge options of arised edge, 1.5/3/5mm radius or a Roman Ogee edge. It’s up to you! You can also choose to have raw HDF on both sides, or white melamine on the back. Custom Profiles Do you need something slightly different? Bigger frame? Smaller frame? Deeper rebate? Featured end panel? Let us know and we’ll do our best to help! Bowing Reduction We offer a pocket-routed-back option to reduce bowing on framestyle doors. The pocket on the back removes some of the tension from the back of the board, to reduce the bowing. While this is not necessary for all doors, it is helpful for tall or bi-fold doors, where it’s more important to have them straighter. (note – they may still bow a bit, but we’re just doing what we can to reduce it). We look forward to working with you on your next profile door project!

JOINERS Magazine December 2021 page 57

HOMAG Treff

Homags successful return to its classic inhouse shows demonstrated the merit of face to face contact.

Real shows are back for Homag Our trade show Live. HOMAG has shown us how much we have missed being together: live demonstrations, personal conversations and wellattended webinars. Even though it was ‘only’ a digital conference, a lot of us experienced the real feeling of being at a trade fair: talking shop with like-minded people, impressing those who love wood with the latest technology or answering practical questions on machinery. Our experts were in their element, just like the 1700 carpenters and joiners who also took part. We would like to express our heartfelt thanks to everyone for this and we have built on it, with digital content and real events on site, at the HOMAG Treff. Because for the first time since 2018, there was a classic HOMAG Treff in October and November in Holzbronn and Herzebrock.

Live.HOMAG The face-to-face events and demonstrations in Holzbronn, Herzebrock and St. Johann were accompanied by the well-known online format Live.HOMAG. Live.HOMAG offers the opportunity to experience HOMAG products and solutions digitally: in live webinars, individual machine demonstrations and presentations of technology highlights. the LOOPTEQ O-600 gantry return system as a supplement to the edge banding machines of the EDGETEQ S-500 series.

Among other things, HOMAG presented solutions about intelligent automation, process optimization and further development of mobile operation. Visitors also could see how they can use digital assistants from

JOINERS Magazine December 2021 page 58

HOMAG to increase performance and efficiency while ensuring sustainability at the same time. (continued over page)

So far, more than 500 live online events have been held, allowing participants to gather information about the latest HOMAG technologies and to put their questions to product experts. “We are really pleased that Live.HOMAG has been so well received, particularly by woodworking shops.” Achim Homeier, Director for Product Management

www.homag.com

YOUR SOLUTION JOINERS Magazine December 2021 page 59

Real shows are back for Homag (continued)

Automation sets new standards Fully automated installations, such as the SAWTEQ B-320 flexTec panel dividing cell for batch-size 1 production or WEINMANN's autonomously operating cells for the fully automated production of building components with industrial robots, set new standards in terms of performance and flexibility. Intelligent automation creates an interlinked material flow with high performance. This is the case, for example, with the LOOPTEQ O-600 gantry return system as a supplement to the edge banding machines of the EDGETEQ S-500 series.

The team always had an eye on the magical triangle of reduced delivery times, lower investment amounts and higher quality standards.

Equipment thought through New equipment variants and clever software assistants increase eﬃciency and create more transparency in production, as with the latest version of the storage management system, woodStore8.

woodWOP 8.0: New functions. Infinite possibilities. The woodWOP success story started more than 30 years ago and the principle has remained unchanged: workpiece-oriented programming — easy and efficient. The next version, 8.0, offers a lot of new functions that have been developed together with joiners. The focus is on practical assistants for comfortable processing.

Another new addition to HOMAG's equipment portfolio is a specially designed interchangeable container for fast and unmixed switching between EVA and PUR hotmelt adhesives in edge banding machines.

Sustainability and conservation of resources HOMAG does not neglect the issue of sustainability either. Digital assistants such as the "Cutting Production Set" support the user in optimizing cutting

JOINERS Magazine December 2021 page 60

and reusing offcuts. Thus, not only saving costs and materials, but also helping to protect the environment. And that was not all There were also innovations in the CNC sector with world premiere of the CENTATEQ N-210 and N-510. Every joinery has its own story, every business has different requirements — including for nesting. Therefore, HOMAG has developed the new nesting platform with a clear focus: maximum flexibility. The new generation is automated and works in single operation, from 3-axis technology to 5-axis technology and on table sizes from 1.25 x 2.5 m to 2.1 x 7.4 m — in half-sized or full-sized format. “We looked at the technology and the requirements for modern nesting in the finest detail to develop the machine from scratch,” explains Vera Zimmermann, product manager for CNC. The result is a modular nesting platform that picks up on

innovative functions and the guiding principles of energy eﬃciency in equal measure. The main components are a highly modular, switchable vacuum and air cushion table concept as well as newly designed suction components that have been optimized using CFD flow simulation. There are also innovations in the area of workpiece handling. For example, diﬀerent technology levels can be selected and automation concepts enhanced or changed quickly and easily using the plug solution created. The team, which is located across different sites, always had an eye on the magical triangle of reduced delivery times, lower investment amounts and higher quality standards.



Magazine December 2021 page 61 151b McLeod Rd, Te Atatu South 0610, Auckland, NZ. Ph 09 835 4090, Fax 09JOINERS 835 4070, www.vikingltd.co.nz

it has simplified and removed all the clutter in our workshop and now we have one central collection and disposal point for dust

Tweakit Joinery Solutions - a traditional dusty environment no more.

A duty of care … Vaughn and Nicky Tongs, owners of Tweakit Joinery Solutions in Palmerston North, have a favourite saying … “People don’t care how much you know, until they know how much you care.” This principle of care inspired them to upgrade their factory and provide a productive and healthy workspace for their employees. The recent purchase of a new CNC nesting machine and edgebander required a completely different approach in dust management to

what they had used up to this point. Egmont Air was commissioned to design and install a new system that would make a difference. Vaughn is blown away by the result of the new Egmont Dust Extraction system, “it has simplified and removed all the clutter in our workshop and now we have one central collection and disposal point for dusts”. But this is not the only significant benefit he comments, “the new dust extraction has eliminated all the atomised fine dust and our employees breathe clean air in what is otherwise a traditionally dusty environment”.

JOINERS Magazine December 2021 page 62

The New Egmont Air system uses centralised modular ducting to connect to each machine and a centralised fan provides the necessary suction to remove and eliminate the ﬁne dust.

systems nationwide. Egmont Air’s team of CAD designers, sales technicians, project manager and installers work together to ensure customers’ expectations and outcomes are exceeded.

The system is also ﬁtted with an automated fan-speed controller that automatically adjusts the suction levels as each machine turns on or oﬀ. Egmont Air, trusted suppliers to the wood-working and manufacturing industry, offer a comprehensive design-toinstallation service of spraybooth and dust & fume extraction

Contact Egmont Air by phone 0800 781 200 or sales@ egmontair.co.nz for more information.

Kitchen design by Mal Corboy Design

500S & 500 AMERTHANE 2K Waterbased System An ISO 5660 Class 3 Fire Rated two pack, waterbased polyurethane ﬁnish system

DISTRIBUTORS Whangarei Paint Centre Whangarei (09) 430 2414 Wairau Paint Centre Auckland (09) 443 3430 PPG Industries NZ Ltd Auckland (09) 573 1620 Grayson Auto Colour Centre Auckland (09) 278 0685 Autolink Distributors Ltd Hamilton (07) 846 1443

• Excellent clarity & nude look on timber. • Silky to the touch.

Linkup Paints (BOP) Ltd Tauranga (07) 571 8921

• Excellent mar resistance. • Low reﬂectivity

Complete Paints Ltd Napier (06) 843 1122

• Excellent non-yellowing properties. USES: 500 Amerthane is designed as a high quality ﬁnish for kitchens, shop ﬁttings, cabinets, desks, paneling, partitions and most interior wood.

Total Paint Supplies Ltd New Plymouth (06) 769 9415 Total Body Shop Ltd Wellington (04) 586 6681 Paintco Nelson (03) 546 6660

For more Information please contact PPG

PPG Industries NZ Ltd Christchurch (03) 384 0255 Rainbow Paints Ltd Dunedin (03) 474 0659 Southern Paints Invercargill (03) 218 4664

PPG Industries NZ Ltd, 5 Monahan Rd, Mt Wellington, Auckland Freephone 0800 990 093 • Freefax 0800 659 377 • www.ppgic.co.nz

JOINERS Magazine December 2021 page 63

Business grows with Proform more staff, turned out I had to get another staﬀ member just to handle the increase in work we were getting!” The machine gets sporadic heavy use. When they have the work and the pressure is on it can be running eight hours a day for days on end. A nice extra was the team from Proform also installed the dust extraction system for use with the machine.

For Richard Hart, coming home to set up his own interior joinery business back in February 2020 was a dream come true. Having travelled to both England and Australia to learn his trade he set up shop in Tarras, not far from Wanaka, as HBH Joinery Ltd. From a small but workable factory Richard and his staﬀ of three have steadily grown their reputation for customised kitchens, vanities and wardrobes. “We have steadily seen an increase in work despite Covid and last year I decided we needed to improve our production level to meet demand.” comments Richard. The factory is some 230m2 on a long narrow site making workspace a premium. “I had seen various CNC machines in action and in particular I had liked the Proform ATC25/13R from Proform CNC Ltd, as it had a small footprint that suited our factory yet could optimise the cutting of a 1220mm by 2440mm sheet. It was a well priced, robust, gantry style machine that had the features we were

Richard Hart left, with Tadeo, Nathan and Paddy.

looking for, including the userfriendly Windows 10 operating software and especially the twelve position rotary automatic tool changer which has proved to be a real time saver.” The machine was installed and commissioned back in March this year. “The service has been unreal: Proform’s Technician Aidan, did a really professional install followed by some training which saw us up and running in no time ﬂat.” recalls Richard.

In the months that have followed, Richard and his team noticed an increase in work. “We found with the machine were able to do a lot of curved work, something that happens a lot in kitchens these days. Along with Enroute software on the machine we use Mozaik 3D drawing programme which is basically a Cabinet Vision product from the USA. Funnily enough, thinking that the machine would also mean not needing to employ

“The shift to CNC has proved a winner both in terms of increased production but also in improving the offer we can make to our clientele: a great product made on time for the right price.” Things are running well down Tarras way...

For more information contact Richard Hart at HBH Joinery Ltd on 027 347 4740 Email Richard@ hbhjoinery.co.nz or visit www. hbhjoinery.co.nz

LOOKING FOR A COST EFFECTIVE NESTED BASED MANUFACTURING (NBM) MACHINING SOLUTION? CHOOSE THE CNC ROUTER SYSTEM THATS RIGHT FOR YOU!

FULL PACKAGE

PROVEN EN N RELIABILITY LIT ITY

ATC 25/13 Automatic tool change model 8 Tool Capacity

from $58,000 +GST

3S 25/13 3 Spindle Model

POSTFORMERS PRESSES GLUE SPREADERS JIB CRANES VACUUM LIFTERS JOINERS Magazine December 2021 page age 64 CNC ROUTERS

www.fsbgroup.co.nz 68 Montgomery Crescent PO Box 40-809, Upper Hutt, New Zealand PH 04 526 8589 FX 04 526 8580 EM proform@xtra.co.nz WWW.PROFORMNZ.CO.NZ

Colour matching

SPRAY PAINTERS

protocols Your client needs new doors but loves the existing frames and wants them to match. Or maybe that young couple wants new countertops that are the exact same colour as the antique sideboard they inherited – sound familiar? Cabinetmakers get colour matching requests from designers and architects all the time … but it’s something of an art form … Let’s talk colour matching, specifically wood stain. There’s alcohol, water-soluble dyes, oil stains, water-based stains, gel stains, glazes, pigments, toners, so many different ways to arrive at the final colour and look; it can drive you nuts!! But does it have to be so confusing?

Residential, Commercial, Hospitality, Retail, Marine Interior Cabinetry & Fittings

Because we use various techniques and materials, we used to mix all kinds of crazy stuff together to find that perfect match. Then we realised the perfect match is often sitting in a can on the shelf! And if the perfect colour already exists in a commercial product, we say, “why not?” The formula’s always consistent, and if you need to match that colour again, you’ll know where to start … and finish. Now, just to be clear, if you’re asked to do a colour match for a client, it’s incredibly important to manage their expectations. Take a cabinetmaker we’re currently working with. He’s building a custom oak piece for someone who wants the colour to match a bamboo cutting board, and let’s be honest; there’s no magic wand that will ever make oak look like bamboo – a critical detail many don’t realise. So there we were, ready to pull out all the pigments, dyes and lacquer. But before we started to look like a science lab, we decided to see if there wasn’t a pre-made solution first. We tested all the general finishes. The top contenders were oil-based Pecan, oil-based Antique Cherry, Nutmeg gel stain and DEFT Light Brown Water-Based Wood Stain from PPG and MIROSTAIN low grain raising waterbased stain from Mirotone. The differences are subtle, some redder, some browner, others more yellow. The red oak was affecting the one thing they all had in common they were applied to, showing the importance of testing your stains on the same material you’ll actually be working with. Bamboo contains a range of colours, and mimicking it ideally would be impossible, so our goal was a happy medium between the light and dark streaks. We decided to go with the Light Brown dye stain, and honestly,

Free Pickup/Delivery

we don’t think we could have gotten a closer match if we tried! Once our cabinetmaker gets his client’s approval (we’re conﬁdent he will), this is a done deal!

What (seemingly) impossible colour matching requests have you received? We’re happy to play mad scientist to get it right, and if we get the job, we’ll do the colour match for FREE!

Fire-rating coatings and Abrasive Blasting to any surface (including timber)

09 630 5049 65 Carr Road Mt Roskill, Auckland office@fsbgroup.co.nz

www.fsbgroup.co.nz

JOINERS Magazine December 2021 page 65

by Amorini Premium Solid Core Surface Benchtops All the beauty and feel of natural stone with exceptional practicality that, unlike stone, can be repaired and renewed with ease.

+LJK TXDOLW\ PRGHUQ DQG D;RUGDEOH benchtop solutions for your home. The premium range of durable, solid bench surfaces that will DGG WKH ÀQLVKLQJ WRXFKHV WR \RXU KRPH ZLWK WKH QDWXUDO VWRQH DSSHDUDQFH WKDW VXLWV \RXU VW\OH Water & Stain Resistant Heat Resistant

Perfect for any kitchen, bathroom or laundry, Mirostone has waterproof qualities that allow for easy cleaning and prevent any harmful germs from harbouring on the surface. It’s a safe and hygienic surface to prepare and eat food from. 0LURVWRQH LV PP PRGLÀHG DFU\OLF ZKLFK XQOLNH DQ\ VWRQH composite on the market, can be repaired and renewed with ease. The durable design and easy home installation allows you to avoid time consuming delays and inconveniences expected with other surfaces.

Easy Installation 20mm Thickness Easy Repairs & Renewal Hygienic Surface

Modern and unique colour options available, head to the Amorini ZHEVLWH WR VHH WKH IXOO UDQJH 7KHUH \RX·OO DOVR ÀQG WKH SURGXFW FDUH guide and installation instructions — be sure to read these carefully once you’ve chosen your Mirostone surface.

About Amorini

10 Year Limited Warranty

Suitable for:

A New Zealand owned and operated company, connecting the nation ZLWK DͿRUGDEOH SUHPLXP EHQFKWRSV $OO PDWHULDOV DUH VRXUFHG IURP the highest quality international specialist manufacturers, combined with modern designs & systems, and old-fashioned craftsmanship to provide you with top quality surface solutions. Our local Amorini experts Donita, Paul and Adrian are dotted across the country, ready to help answer all your questions. They’ll be able WR KHOS ÀQG WKH EHVW VROXWLRQ IRU \RX DQG \RXU FXVWRPHUV

Kitchens

Laundries

Vanities

Donita Robertson Cut to size for easy install Instant trade quotes online

Stock ships in 2 days Samples available

Sales Executive - Upper North Island donita.robertson@amorini.co.nz 021 737 523

Paul Bielawski Sales Executive - Lower North Island paul.bielawski@amorini.co.nz 027 494 9498

amorini.co.nz Ph: +64 6 358 2759

info@amorini.co.nz

Adrian Key Sales Executive - South Island adrian.key@amorini.co.nz 027 494 9490

PYROEX SPLASHBACKS

JOINERS Magazine December 2021 page 66

JOINERS Magazine December 2021 page 67

A unique, innovative & versatile 20mm Solid Surface Acrylic Benchtop Solution.

SUPPLIED BY:

With the look and feel of real quartz stone, this solid surface product can transform and modernise almost any area around the home with a range of warm and beautiful colours. EvoStone slabs come prepolished in sheet sizes perfectly suited for kitchens, vanities, laundry and some commercial applications.

Lightweight.

Durable.

Can be DIY.

Hygienic & food safe.

Easy to cut/fabricate on site & install.

No benchtop substrate required.

Repairable - most scratches can be easily polished & removed.

Safe fabrication - contains no silica.

Waterproof & non-porous.

HOW TO ENTER: 1. Purchase any Evostone benchtop for your kitchen. 2. Go to the link below and fill in the entry form. 3. Attach your confirmed purchase documentation. 4. Submit the form and you’re done. Good luck!

Go to evostone.com.au/20kgiveaway to enter. Submissions close on the 31/12/21 at 11:59pm. Winner will be drawn and announced on the 31/01/22. For further information and terms & conditions, go to evostone.com.au/20kgiveaway.

GET 10% OFF ALL EVOSTONE ORDERS UNTIL 31/12/21 Evostone is available in New Zealand and ready to install! Save time and money compared to other benchtop materials.

stoneandjoinery.co.nz | 09 442 5922 | info@stoneandjoinery.co.nz

JOINERS Magazine December 2021 page 68

INTRODUCING THE NEW

STONEANDJOINERY.CO.NZ Now you can easily navigate for stone and granite benchtop ideas while instantly ordering joinery products for your next kitchen, bathroom and laundry project.

Stone & Joinery Solutions are benchtop specialists and suppliers of joinery products with a combined industry team experience of over 100 years. We offer a combination of automated machinery together with hands on stone masonry to provide that bespoke finish. Our joinery range is also high quality and innovative making your designs last and stand out.

Visit our brand new website here:

Just some of the recognised brands supplied by Stone & Joinery Solutions:

www.stoneandjoinery.co.nz | 09 442 5922 | info@stoneandjoinery.co.nz

JOINERS Magazine December 2021 page 69 @stoneandjoinerysolutions

... it seals the board better. There’s no clean up. No excess glue. Also, we can charge a premium for it.

Hayden Kirk with operator Joseph Wiel.

airTec benefits compelling Well-known Dunedin firm Ron Kirk Joinery has had the whole range of edgebanders during their 30 year history. Hayden Kirk, son of founder Ron Kirk and now Directing Manager, started as an apprentice 23 years ago. He remembers – not so fondly – his early edgebanding experiences. “We had one of those hot air guns that heated up the back of the tape, and then we’d spend hours and hours scraping and cleaning to get the final result. It was a big day when we got our first Janssens edgebander, but even then processing and cleaning up a whole kitchen was several days’ work.” Edgebanding at Ron Kirk Joinery has got more efficient since those early days. From the early 2010s they operated an Ambition 1210 from German edgebanding specialists Brandt (now rebranded Homag). But earlier this year Hayden and the team took another step up the technology ladder, buying a new Homag EDGETEQ S-200 1130AT – becoming the first joinery shop in Dunedin capable of processing laser-edged tape.

“We’ve always kept our eye on developments in technology.” says Hayden, “and we knew laseredged tape was a technology we’d adopt when Homag’s airTec units came on a model that would suit our size.” The Brandt was running two glue tanks of EVA glue: clear and white. The finish was excellent but Hayden points out that doing their corner rounding on a separate machine was adding time to each kitchen, as well as taking up valuable workshop space. The Homag is much the same size as the previous edgebander, but comes with on-board corner rounding, ensuring their edge processing has sped up, but within a smaller overall footprint in the workshop. Why did Hayden move to laseredge tape? “The benefits airTec promised were compelling,” explains Hayden. “Even better, they’ve all turned out to be true. For a start, it seals the board better. There’s no clean up. No excess glue. Also, we can charge a premium for it. And it brings all of our high-gloss work under our control.” This last point is a significant one. “With a lacquered kitchen we were dependent on the painter. Any damage or mistakes found at installation meant getting

JOINERS Magazine December 2021 page 70

a re-cut panel back to the painter. Relying on others affected our timing, and if they were busy there could be significant delays and costs. Now everything is done in-house so stuff like this can be fixed by us, and quickly.” Hayden and the team are now using laser-edge tape on all components in their kitchens, including the carcasses. They get their Homag serviced regularly by Jacks, and have it set up to enable most of their settings and changes to be adjustable from the controller. “Unless the customer has specifically requested 2mm edging we find it quicker and we get a better result putting everything through at 1mm with airTec,” says Hayden. “There’s really good availability of colours now. We’re even finding some architects specifying high gloss tape.” It’s not only edgebanding where Ron Kirk Joinery has been an early adopter of technology. Their Format-4 Kappa 550 e-motion saw was the first in NZ to be linked to nesting software – providing a stepping stone to the nesting efficiency they now have with their CNC. “So long as you have good machines and capable staff

in the workshop, the key area for efficiency is the design work,” he says. “With the combination of software we use now, I can show a customer exactly what their kitchen will look like in their house before we even start processing. Given the investment many of our customers are making I think it’s important for them to see what they’re paying for, and so we can get it right for them ﬁrst time.” Given how busy the team at Ron Kirk Joinery are, and with their reputation meaning customers keep coming back time after time, it’s clear they’re doing just that – getting things right ﬁrst time.

www.ronkirkjoinery.co.nz

The area gripper FMHD-3R22 has a suction cell grid with three rows and allows handling of narrow slots with a width of 35 millimeters or more.

The Schmalz area gripper FMHD from Treotham helps unstack wooden boards in layers.

Area gripper FMHD in three variants From sawmills to furniture construction – the area gripper FMHD from Treotham is frequently used in wood working. Schmalz developed its area gripper FMHD to allow particularly narrow, heavy, or extra long sections to be lifted quickly and safely. Solid wood materials such as cross laminated timber (CLT) exceed previous design limits for wood. Thanks to its high static

load-bearing capacity, CLT has long been used for industrial prefabricated houses. Architects can position doors and windows more ﬂexibly as well as design higher ceilings and wider supports. New formats also mean new possibilities. Treotham therefore increased the range of applications for its existing Schmalz area gripper FMHD with an extra wide quick-change system, third suction row, and oversized gripper construction.

Three Variants, Three Strengths The area gripper FMHD-3R22 has a suction cell grid with three rows and allows handling of narrow slots with a width of 35mm or more. The area gripper FMHD250 has a wider suction plate for an increased lift capacity. With 3,500 N, its holding force is almost double that of the 3R22. The maximum gripper length is 2,492mm for both variants. The FMHD-2R28 provides greater lengths and can be up to 3,500mm long and handle workpieces with a width of 50 mm or more.

All three variants have an integrated vacuum reservoir and three-section design. Schmalz thus increases suction force and energy efficiency while also reducing maintenance work. Unstacking in layers or transferring porous and warped workpieces is easy – even in dusty sawmills. Treotham Automation www.treotham.co.nz 0800 847 200

Schmalz Vacuum Lifting & Clamping Treotham Automation supply the range of Schmalz Vacuum Lifting devices, customizable and suitable for standard weights up to 750kg. Schmalz clamping solutions are used for a wide range of machining and assembly tasks. With vacuum power, components made from wood, metal, glass or plastic are fixed securely and without distortion. JOINERS Magazine December 2021 page 71

www.treotham.co.nz

info@treotham.co.nz

0800 847 2004

Auckland & Hamilton

Sliding Doors When Christchurch based Independent Doors moved their business, their quality extraction system was moved effortlessly with them! Back in 2016 when Kim Lewis from Independent Doors in Christchurch chose NZDUCT+FLEX to specify, supply and install a new filter and ducting for their busy door factory, she already knew, from her own business philosophy, that buying quality doesn’t actually cost more – and that it always pays back in the long run. Since 1994, Independent Doors has been providing high quality, high performance, standard and custom interior and exterior doors and sliders for the residential and commercial construction markets. Wi d e l y r e c o g n i s e d a m o n g architects, contractors, designers, builders and professionals in the building industry, Independent Doors Ltd has earned a reputation for excellence in its field, taking pride in providing certified superior products at reasonable prices. So 5 years after the initial filter installation, when due to rapid expansion, Independent Doors needed to relocate, the extraction system moved too in what Kim describes as a “seamless process”. “Due to the expertise, and unparalleled level of communication between Scott Saunders (the NZDUCT+FLEX local southern Sales Manager), Nav Sharma (the Installation Manager who worked on our original build), and Aaron Proctor, the Engineering Manager (who

LIPLOCK® modular ducting can be re-used and reconfigured any number of times as machines move or change.

organised the final relocation of the filter), I did not have to concern myself with this part of the move at all” confirms Kim. NZDUCT+FLEX employ their own fulltime permanent install staff so the initial part of the process was to send one team down to do a walk over the new site, discussing machine numbers and positions, and re-calculate final duct runs with a view to re-using 100% of the original LIPLOCK ® modular ducting

JOINERS Magazine December 2021 page 72

to save money. The teams are building duct runs everyday so on the ﬁrst site visit they quickly dismantled the entire ducting system and arranged transport for re-use at the new site along with the fan and complete ﬁlter (lifted by a hi-ab as one piece and repositioned outside the new premises).

to join everything up using the original modular duct. Invariably there were changes to machine positions despite these being agreed just weeks previously, but due to the large LIPLOCK® stock holding in 3 warehouses in Auckland, the installers could over night solve all of the issues resulting from these changes.

With filter and fan correctly bolted down in their new home, both install teams from NZDUCT+FLEX worked together

To keep the environment dust free, the 3 bay double modular ﬁlter with 84 ﬁlter bags, can deal with up to 20,000m³ of air and

EVERYTHING YOU NEED FOR A

DUST SOLUTION Largest range of Modular duct in New Zealand. Specialist CNC and Poly Anti-static ﬂex R<10 8

In this busy door factory, the Rotary valve acts as a seal from the high velocity of the dust entering the filter hopper: it is dropped neatly into the bin below without any dust blowing around.

dust per hour and can still be expanded in the future if required, by adding extra modules. As all the components i.e. the fan (JK45K:18.5kw), filter, filter bags and LIPLOCK® ducting all come from Danish JKF Industri, compatibility and performance of the whole system is assured. Aaron Proctor, in charge of the Maintenance Service offered to all customers, revisited the site last month to check that the whole system was still operating to JKF’s required specifications and equal to when the filter was first installed 5 years ago. The filter is still running on the original filter socks due to being correctly specified in the first instance : a huge maintenance saving for the business.

Kim Lewis summed up, “NZDuct+Flex made our relocation process extremely easy, working with us to enable us to reuse the majority of our kit. The company provides great service, superb product, excellent expertise and above all unparallel levels of communication. I highly recommend NZ Duct to anyone looking for an extraction solution!”

For more information contact New Zealand Duct & Flex Freephone 0508 69 38 28 www.nzduct.co.nz or www.jkf.dk or email info@nzduct. co.nz

DUST FILTRATION MANAGEMENT

FANS

DUCTING

FUME MANAGEMENT

FLEX

Freephone 0508 NZ DUCT (0508 69 38 28) 13F Saleyards Road, Otahuhu, Auckland P: 09 276 8020 F: 09 276 8070 E: info@nzduct.co.nz

www.nzduct.co.nz

JOINERS Magazine December 2021 page 73

Not your average apprentice Kelly Irvine isn’t your typical apprentice. She represents a growing trend in people who may have up to seven career changes in entirely diﬀerent sectors before age 40. Before starting her apprenticeship at Lee Brothers (Rotorua), Kelly worked a diverse range of jobs, from Promotions Coordinator in the entertainment industry for MediaWorks, to flying abroad, where she worked as an Account Manager for a coﬀee roastery in London. If she set her mind on something, no role title was out of her limits! Like many Joiners, Kelly’s detailorientated nature has led to her fascination with woodworking and it was almost in the cards that her career would be within the joinery industry. Kelly Irvine.

BBCITO CITO IS IS PROUD PROUD TO TO JOIN JOIN TE TE PPŪKENGA ŪKENGA WHAT THIS EXCITING CHANGE MEANS FOR YOU

Apprenticeships are the same. Qualifications are the same. BCITO services are the same. BCITO people are the same people, and you can get in touch the same way.

SO, IT’S BAU OR BCITO AS USUAL.

1 17 175 1755

WE’RE STILL BUILDING PEOPLE FOR MORE INFORMATION VISIT

BCITO.ORG.NZ/BAU

JOINERS Magazine December 2021 page 74

BCITO AS USUAL

Like all good stories, there’s always a serendipitous moment. Kelly shares, “Lee Brothers listed an advertisement looking for an apprentice Joiner/Cabinet Maker on Seek. My partner had just been offered a job in Rotorua, so the timing was perfect. I applied, and I got the job. “I feel at my best as a Joiner. It’s hands-on. I get to create unique pieces that clients get excited about. Being physically active is important to me and installing kitchens provides an all-body workout. The variety never ceases to surprise, one week I’ll be putting together a kitchen, and the next it will be a set of sashes or an entrance door. As a joiner, you’re in a continuous cycle of accomplishment. Once a job is done you admire your output, reset, and move on to the next job – it’s undeniably awesome. I love it!” Having the ‘insiders’ scoop’ of being a 32-year-old female in building and construction, Kelly says, “Being in full-time employment while working toward a qualification is of huge benefit. Having experienced work colleagues who can guide you through things, who have been in your position before is also very valuable. The experience is universal, and being qualified will open up some great opportunities.” One of these opportunities was the chance to submit an entry into the 2021 Apprentice Best Timber project under two years hosted by the industry at the NZMJ Gala Awards dinner. Kelly admits, “Originally, I wasn’t keen to enter as I was so early on in my apprenticeship, but my boss (thankfully) put a little pressure on, and I got my entry board together and won.” For Kelly, the moment was a little surreal. “It was encouraging to know I was on the right track. Being thrown in the deep end has some real benefits especially seeing how proud of me my family were.”

Support is important for anyone pursuing their dream career and Kelly’s friends are not shy to show their encouragement. With a smile, Kelly teases, “A few of them are buying houses at the moment, so I think they can see the future beneﬁts.” Now more than ever before, it is healthy to reflect and find perspective. Kelly says, “A few months back, I made a stain quality, cedar TGV entrance door with top and bottom rails. When I was given the job, I felt a little intimidated, but my manager made me realise I did have the skills to complete the job. After a few discussions with my workmate, I progressed through the project, and the finished product only served to reinforce I’ve never felt so proud of myself and such a sense of achievement. “It’s refreshing working in an industry with so many moving parts. As I see it, the career opportunities are endless. At this stage though, getting qualiﬁed is my main focus, and that will keep me busy for the next three years.” For Kelly, life is great and both Rotorua and Lee Brothers are home. She says,“It’s refreshing to work for a company that sees the importance of work-life balance. I can pop into the workshop on a weekend to complete a personal project or spend time camping and hiking when the weather is warm. When it’s not – a game of darts and listening to music is how I like to recharge. 

JOINERS Magazine December 2021 page 75

Steering a course Ian Featherstone

Being fully booked does not make us immune to hard times

nother year has ﬂown by, and it was another very diﬀerent one for most of humanity. Many of us are pleased to be working in the building industry, at least there is plenty of work, and the outlook for 2022 remains strong.

Ian Featherstone is a business advisor and leadership coach, and the owner of Glass Half Full. He specialises in the construction industry, particularly the joinery & cabinetry sector. For more information or to find out how you can move your team forward, please visit www. glasshalﬀull.co.nz

However, for many people, these last couple of years has taken a toll on our mental health, and there are many people suffering as a result. It’s easy to think that this is just happening to us but remember the Master Joiners slogan; “don’t go it alone”. You are not alone. Reach out for help if you need it. I have had more contact this year with joiners and cabinetmakers than almost any other year, and whilst firms are “flat out busy”, I see a lot more anxiety, uncertainty, frustration and generally less happiness.

"You can only control what you can control" Heather O'Reilly

All these things increase costs, impact customer and team satisfaction, and reduce proﬁt. So, what can we do to minimise the impact and risks of these “happiness and proﬁt hazards”? • •

• •

There has also been a productivity drop due to the stop and re-start because of lockdowns. Every time we come back from a long break, it simply takes time to get “back into the groove”. To add to this, our industry has suffered interruptions and re-work from global and local supply chain delays. • Anyone providing joinery to new builds or major renovations will be having a significant % of their installation dates moved out due to delays in building materials, shortage of subcontractors, or further restrictions on site. This creates a never-ending juggling of the plan, and many companies are adjusting schedules daily as a result. It’s an excellent time to remind ourselves that we can only influence or do something about the things within our control. For many situations, all we can do is communicate appropriately to the affected parties as soon as we know something has changed.

JOINERS Magazine December 2021 page 76

•

Be realistic; know your capabilities and capacity and plan to this level, allowing a % for job schedule slippage. Learn to say no, decide who your “A” customers are, and plan to look after them. Reduce complexity and supply risk by specifying reliable products from reputable sources. Simplify designs so that a site measure is either not required or there are less critical measurements required before you can start. Provide full-size templates if necessary, or mark the ﬂoor for builders, hold each other to account for accuracy. Review your trading terms to allow for larger deposits to cover more materials, reserve the right to change the specification of some items, with consent, when supply impacts your start date or results in additional site visits and extended snag lists. Utilise the clause in your t&c’s to increase prices if the quote is past its expiry date, if you don’t have such a clause, get advice, and add it in. Consider adding a clause to allow you to use a variation process when extra labour costs will be incurred due to site schedule changes or return to site trips to ﬁt

•

hardware or other items not available at the initial installation time (often items speciﬁed by other parties). Talk to your clients about this. Review your prices and hourly charge-out rates, make sure you charge for professional services such as design, technical advice or drawings for building consent or client sign off. Don’t just think they are an overhead cost, they are not. List Health and Safety compliance in your pricing and if appropriate, disclose this amount to client. These costs have been imposed on you and will ultimately be passed to the consumer. When you face a situation where a client requests to delay for a few weeks, and you have no more space for 3-6 months, let them know your situation and that you may not be able to make a ﬁrm commitment to a new date if they give up their booking. They may miss out and must wait. Just like what is happening to NZ citizens trying to get a MIQ booking. Let clients know in advance of this potential situation during the sales process.

I wish you all well for the remainder of 2021, a good restful holiday, and a renewed ﬂexible mindset for 2022 and beyond. If you would like to talk in conﬁdence about any of the above or feel the need to reach out, please call me. 

Calling all timber joinery apprentices The Master Joiners Apprentice Awards program is now open for entries. All timber joinery apprentices across New Zealand are encouraged to enter. For all details on how to enter visit www.masterjoiners.nz All entries are automatically entered into the Peoples Choice Award. The People’s Choice award voting will open on Thursday 19th May 2022 at the Master Joiners Annual Conference, held at the Marlborough Events Centre, Blenheim.

Who will join our 2021 winners in being our next People’s Choice Award Winners in 2022?

Antonio Fruean from McNaughtons Doors & Windows, Auckland. Winner of the Awisa-Master Joiners Peoples Choice Award 2021 Over two years, & Winner of Highest Judged for workmanship and skill.

Kelly Irvine of Lee Brothers Cabinets and Joinery, Rotorua. Winner of the Awisa-Master Joiners Peoples Choice Award 2021 Under two years, and Best Timber Project Under two years.

Timber Joinery Apprentices – It’s your time now!

Proudly supporting The Master Joiners Apprentices Awards 2022

JOINERS Magazine December 2021 page 77

Due Process a column by Geoﬀ Hardy

How to avoid getting stuck with F

Geoﬀ Hardy has 46 years’ experience as a commercial lawyer and is a partner in the Auckland firm “Martelli McKegg”. He guarantees personal attention to new clients at competitive rates. His phone number is (09) 379 0700 and email geoﬀ@ martellimckegg.co.nz.

This article is not intended to be relied upon as legal advice.

or years we have been lamenting the poor productivity of the New Zealand building industry in comparison to other developed countries, and it’s a documented fact backed up by solid evidence. It’s not that kiwi tradesmen are lazy or incompetent – the causes relate more to geographic and population factors – but it does mean we pay more for building materials and services than we should do. The preferred solutions are greater competition in the building materials sector, greater reliance on prefabrication, and greater standardisation of buildings, but they are tough obstacles to overcome. MBIE are trying to free up prefabrication from red tape and improve the product certiﬁcation system, but at the same time they are making life tougher for builders, joinery manufacturers and building materials merchants through increased liability. Then add to that mix the impact of the covid-19 pandemic, and we have building prices going through the roof. It’s all due to basic economics – demand exceeding supply. Demand has increased due to the Government pumping borrowed money into the economy and consumers not being able to spend it on overseas holidays. Supply has decreased due to a reduction in domestic timber milling capacity, domestic and overseas manufacturers mistakenly reducing their production in anticipation of a pandemic-induced recession, and the global freight industry doing the same thing.

JOINERS Magazine December 2021 page 78

Given that joiners are sometimes signing up projects that won’t be able to start for six months or more and accepting orders that won’t be able to be delivered for a similar period - when substantial price rises over that period are inevitable - there will be an increased focus on the joinery supplier’s ability to pass on cost increases in the months to come. And that will create tension not only with clients who can’t cope with the inevitable budget blowout, but also with their banks who are increasingly insisting on genuine “fixed price” projects and are seemingly blind to the realities of variations, provisional sums, and cost fluctuations. Because those are the three main reasons why so-called fixed prices are never fixed. How are joiners going to protect themselves against their profitability being eroded by these unprecedented price rises in the aftermath of the pandemic? The best way is by charging on a cost reimbursement basis so that property owners pay the true cost of materials and labour at any given time. However that leaves property owners uncertain about their ability to fund their project, so they naturally want their suppliers to assume the risk of price rises. The suppliers can do that if they build in large contingencies into their fixed prices (at the expense of the property owner) and if they get their own suppliers and subcontractors to commit to fixed prices. But in these days of high demand coupled with

material shortages and long leadtimes, they aren’t going to do that. Alternatively, joiners can stockpile building materials in anticipation of using them on some project later on, but they bear the cost of procurement and storage and they run the risk that many of those materials will turn out to be superfluous. That leaves us with the three standard ways to vary prices in a fixed price contract – variations, provisional sums, and cost fluctuations. You can only charge for a variation if you are required to do something different from what you originally agreed to do, so that won’t help you if the project hasn’t changed, but the cost of it has. Provisional sums are appropriate if there are certain components of a project that simply can’t be priced accurately in advance, but if that applies to the whole of the project and you make the whole of the contract price provisional, then all you are doing is effectively converting a fixed price contract into a cost reimbursement one, and the customers won’t wear it. That leaves you with cost fluctuations, and you will only be able to pass those on if your contract allows you to do so. Cost fluctuation clauses in c o n t r a c t s v a r y w i d e l y, s o what you can do depends on the particular wording in your contract – assuming you have an entitlement to adjust your price for cost fluctuations in the first place. For example that entitlement may

cost increases be restricted to the cost of labour, or subcontractors, or materials, or any combination of them. And assuming you are allowed to make the adjustment, then what you are entitled to adjust for, is the diﬀerence between the rates and prices that applied when you originally accepted the order, and the rates and prices that apply when it comes time to invoice for your goods and services. So you will have to have some way of proving what the diﬀerence is. That means having written records of what you based your original price on – wages and salaries, and quotes or estimates from subcontractors and suppliers – and then similar records of what those inputs cost you now.

Finally, you might be obliged to do what you can to resist any price increases and procure subcontracts and materials on the basis of ﬁxed prices that cannot be increased during the course of the your work. In that case you would argue that it simply isn’t feasible to obtain ﬁxed supplier and subcontractor pricing in the current market. You would need to get statements verifying that from your suppliers and subcontractors, if you are put to the test. 

Sometimes an ability to pass on cost increases is subject to those cost increases not being reasonably foreseeable at the time the Contract is signed. If your cost ﬂuctuation clause is qualiﬁed in that way, then whether you are caught out by the no-foreseeability requirement will depend on how widely-known the current supply shortage was when you signed your contract. If it was widely known, then your customer is likely to argue that you took the risk of price increases that you knew were likely to eventuate. You would have to argue in response that although you knew there was a global pandemic, you were no better equipped to foresee what the Government response would be or how global supply chains would be affected, than anyone else.

JOINERS Magazine December 2021 page 79

master joiners Operations Manager - Allison Delaney, PO Box 12269, Thorndon, Wellington 6011. p: 027 234 1727, e: operations@masterjoiners.co.nz

AUCKLAND Secretary, Michael Bangs 24 Linwood Ave, Mt Albert, Auckland 1025. Ph 09 846 3364, email akmasterjoiners@woodman.co.nz Advanced Timber Joinery PO Box 132, Silverdale, 217 Spur Road, Stillwater/Silverdale, Ph 09 426 9785, contact Wade Saunderson. NZS4211 Affiliated. All Timber Joinery (2017) Ltd Unit A, 1058 Great South Road, Mt Wellington, Auckland. Ph 09 270 9605, contact Rory Johns. NZS4211 Affiliated. Alpha Joinery Services (2010) Ltd 124D Felton Mathew Ave, St Johns, Auckland, Ph 09 578 0391, contact Juan Whippy. NZS4211 Affiliated. Art Deco Interior Ltd 6 Grayson Avenue, Papatoetoe 2104, ph 09 218 8079, contact Sam Ju. Auckland Joinery (2014) Ltd 2 Taylors Road, Morningside, Auckland, Ph 09 846 0346, contact Ross Webster. NZS4211 Affiliated. bmc limited Unit E, 191B Archers Road, Auckland 0629, Ph 027 511 3717, contact Sandra & Bjoern May. BML Builders Ltd 18 Shamrock Drive, Kumeu, Ph 09 412 2350, contact Kaye Butler. NZS4211 Affiliated. Canam Joinery Ltd 196 Swanson Rd, Henderson, Auckland. Ph 09 836 0732, contact Angus Welton. Carlielle Kitchens 138 Manukau Road, Pukekohe, Auckland 2120, Ph 09 238 5222, contact Doug McMiken. Cedarlite Industries Ltd 4 Mahunga Dr, Mangere Bridge, Auckland, Ph 09 633 0410, contact John Harrison. NZS4211 Affiliated. Continental Stairs Ltd 32 Waipareira Ave, Henderson, Auckland, ph 09 836 1935, contact John or Anthony van Erp. Counties Joinery 36 Sedgebrook Rd, Patumahoe, RD 1, Pukekohe 2678. Ph 09 238 7264, contact Roy McKerras NZS4211 Affiliated. CT Timber Joinery Ltd 48 B Porana Road, Glenfield, Auckland, Ph 09 444 9041, contact Cameron Stringer. NZS4211 Affiliated. Cube Dentro 8 Tironui Station Rd, West Takanini, Auckland. Ph 09 297 7830, contact Leonie Hamill. Cutting Innovations Ltd 70 The Concourse, Henderson, Auckland 0610, Ph 09 836 9050, contact Alec Stringer Dando Doors and Windows Ltd 62 Stoddard Rd, Mt Roskill. Ph 09 629 0222, contact Peter Facoory. NZS4211 Affiliated. Danska Cabinetmaking Unit 5, 56 Rewarewa Rd, Raumanga, Whangarei, ph 09 438 1100, contact Aaron & Carolyn Rawson. Design Timber Doors & Windows Ltd 118 Mangere Road, Otahuhu, Auckland, Ph 021 0868 6770, contact Sailesh Prakash. NZS4211 Affiliated.

Doorways (2009) Ltd 428 Church St East, Penrose, Auckland, Ph 09 571 0605, contact Neville Shirley. NZS4211 Affiliated.

Mattson Joinery PO Box 76690, Manukau City. Ph 09 277 7642, contact David Mattson. NZS4211 Affiliated.

Euro Timber Joinery Co Ltd 34 Waipareira Ave, Henderson, Auckland, ph 09 837 1833, contact Shane Paterson. NZS4211 Affiliated.

McNaughton Windows and Doors PO Box 27 061, Mt Roskill. Ph 09 620 9059, contact Andrew Riley or Dave Cunningham. NZS4211 Affiliated.

Fineline Joinery Limited 4 Corban Avenue, Henderson, Auckland, Ph 09 836 2212, contact Richard Schaefer. NZS4211 Affiliated.

Meridian Joinery Ltd 18 Parity Place, Glenfield, Auckland, Ph 09 444 9247, contact Kieren Mallon.

Geoﬀ Locke Cabinetmaker Ltd 67 Hodge Road, R D 6, Ruatangata, Whangarei 0176, Ph 09 433 5745, contact Geoff Locke. Goldﬁnch Timber Joinery Ltd 20 D & E Onslow Avenue, Papatoetoe, Auckland, Ph 09 277 8803, contact Harvey Whitehead. NZS4211 Affiliated Grandvue Joinery 42 Gregory Road, Waitakere. Ph 09 810 9398, contact Robert Piacun. NZS4211 Affiliated. Guyco Kitchens & Joinery Ltd 8 Rewa Rewa Road, Raumanga, Whangarei, Ph 09 470 0653, contact Peter Dainty. G & J Joinery (1997) Ltd 372 West Coast Rd, Glen Eden, Auckland. Ph 09 818 5585, contact Alan Parry. NZS4211 Affiliated. Heritage Joinery Ltd 1007 Paerata Road, Paerata, Pukekohe. Ph 09 239 2794, contact Michael Oglesby. Hewe Kitchens & Interiors 10 Triton Drive, Albany, Auckland 0632, Ph 09 479 6504, contacts Tony Hewetson or Craig Hewetson. Haydn & Rollett Ltd 1 Warehouse Way, Northcote, Auckland 0627. Ph 09 443 8315, contact Christopher Hartley. JT Cabinetry Ltd 32 Neil Park Drive, East Tamaki, Auckland, Ph 09 279 8984, contact Noel Rowse. Kay Joinery 1226 Oruru Road, R D 2, Peria, Kaitaia, Ph 09 408 5547, contact Daniel Kay. NZS4211 Affiliated. KBL Joinery Ltd 7/220 Bush Rd, Rosedale, Auckland 0632. Ph 09 479 6380. Kitchen Dynamics Limited 122 Kitchener Road, Waiuku, Auckland, Ph 09 235 0252, contact Colin Drummond. Kitchen Inspirations Ltd Unit 15, 518 Buckland Road, R D 2, Pukekohe, Ph 09 239 0875, contact Justin and Rebecca Berry Legacy Joinery 120 Captain Springs Rd, Onehunga, Auckland. Ph 09 250 2150, contact Brandon van Zyl. NZS4211 Affiliated. Leslie A J & Co Ltd PO Box 35 628, Browns Bay. Ph 09 479 4662, contact Steve Leslie. NZS4211 Affiliated. Mahurangi Joinery Ltd 23a Glenmore Drive, Warkworth, Auckland 0910, Ph 09 425 9849, contacts Joel and Suzannah Hemus. NZS4211 Affiliated. Matakana Kitchens & Joinery Ltd 50 Matakana Valley Road, Matakana, Ph 09 422 7804, contact Jeffrey Smith. NZS4211 Affiliated.

Divine Design Ltd (T/A JDC Cabinets) 30 Falstaff Place, Half Moon Bay, Auckland 2012. ph 09 622 1912, contact Julie Todd.

JOINERS Magazine December 2021 page 80

Neo Design Ltd 96 Hillside Road, Glenfield, Auckland. Ph 09 443 4461, contact Wayne Church or Paul Burgess. Next Level Joinery Ltd 3D Target Court, Wairau, Auckland. Ph 021 568 655, contact Brendon Sowerby. NZS4211 Affiliated.

Westpine Joinery Ltd 7 Binstead Rd, New Lynn, Auckland. Ph 09 827 6488, contact Bill or Donny Rawlinson. www. westpine.co.nz. NZS4211 Affiliated. Wendekreisen Travel Ltd Unit 1, 197 Montgomerie Road, Mangere, Auckland, Ph 03 489 6507, contact Sascha Warnken; Dieter Schuetze Whenuapai Joinery (1988) Ltd 49 Pupuke Rd, Takapuna, Auckland. Ph 09 416 4995, contact Ian Midgley. NZS4211 Affiliated. Wood Works NZ Ltd 188B Stoddard Rd, Mt Roskill, Auckland.Ph 021 150 5710, contact Serge Landry.

Nicks Timber Joinery Ltd 56 Forge Road, Silverdale, Auckland. Ph 09 426 6862, contact Ken Caldwell. NZS4211 Affiliated.

WAIKATO BAY OF PLENTY

Ninety Degree Kitchens & Design Ltd 11 Tanekaha Lane, Kerikeri, Northland 0294, Ph 022 624 0056, contact Carli Scoles

Secretary Ph 04 471 1133 Email: info@masterjoiners.co.nz

Owairoa Joinery Ltd PO Box 58 336, East Tamaki. Ph 09 273 3699, contact Mark Harriman. NZS4211 Affiliated.

Advance Joinery 2015 Ltd 71 Higgins Road, Hamilton, Ph 07 846 0026, contact Kris Allen.

Pakuranga Joinery Ltd 2 Canon Place, Pakuranga, Auckland. Ph 09 576 8858, contact Gary Farquhar. NZS4211 Affiliated.

Artisan Carpentry Ltd 747 No2 Road, R D 2, Te Puke 3182, Ph 027 344 1918, contact Charles de Lapomarede

Papakura Joinery Ltd 45-51 Tironui Road, Papakura North, Auckland, Ph 09 298 7145, contact Glenn Haszard. NZS4211 Affiliated.

Autocrat Joinery 31 Maru Street, Mount Maunganui, Ph 07 574 8162, contact Steve O’Donohoe. NZS4211 Affiliated.

Popular Cabinets Ltd (T/A Popular Kitchens), PO Box 25 1052, Auckland, 2140, ph 09 576 6358, contact Sherry Shi.

Beaver Kitchens Ltd 28 McAlister St, Whakatane, Ph 07 308 7642, contact Michelle McAnulty.

Regal Plus Joinery Ltd 35 Commerce Street, Whangarei, Ph 09 438 2989, contact Jason Hammond. Rockﬁeld Woodworkers (2003) Ltd 9 Parkwood Place, East Tamaki, Manukau, Ph 09 274 4698, contacts Bryan Hancock and Nick Jones. NZS4211 Affiliated. Seaboard Joinery 2016 Ltd 59A Leonard Rd, Penrose, Auckland. Ph 09 579 9571, contact Michael Kreft. NZS4211 Affiliated. Smith & Parker Joiners 35 Waipanga Road, Kamo, Whangarei, Ph 09 435 5415, contact Albert Smith or Simon Parker. NZS4211 Affiliated. Southey and Knight Group Ltd 50 Hooper Ave, Pukekohe, Ph 022 455 9975, contact Ryan Southey. NZS4211 Affiliated. The Kitchen Tailor 536 Mahurangi East Road, Algies Bay, Warkworth, Ph 027 448 1879, contacts Adam & Kirstyn McNeil Timber Joinery Solutions Ltd 1007 Tauhoa Road, R D 4, Warkworth, Auckland, Ph 09 422 5873, Contact Dave Sattler. NZS4211 Affiliated. Total Timba Joinery PO Box 101 153, Glenfield. Ph 09 444 7772 contact Rob Pickup. NZS4211 Affiliated. VSP Interiors Limited 68 A Hillside Road, Wairau Valley, Northshore, Auckland, Ph 021 183 9151, contact Vishal.

Classical Doors Ltd Cnr Chadwick Rd & Sherson St, Tauranga, Ph 07 578 4908, contact Scott Wilkins. NZS4211 Affiliated. Clearline Ltd 65 Hull Road, Mt Maunganui, Ph 07 572 4307, contact Barry Ririnui. NZS4211 Affiliated. CM Joinery 201 Bowman Rd, RD 9 Hamilton 3289, Ph 07 846 7192., contact Craig Mackie. Colourform Joinery Ltd PO Box 10121, Te Rapa, Hamilton, Ph 07 849 6655, contact Mike Taylor. NZS4211 Affiliated. Concept Kitchens & Bathrooms Ltd 73 Riverlea Rd, Hamilton, Ph 07 856 4705, contact Ross Bones. Countrylane Kitchens Ltd 343 Wright Road, RD 4, Katikati 3178, Ph 0274 761 315, contact Darrell Garrett. Cromptons Joinery PO Box 751, Taupo. Ph 07 378 7968, contact Allan Crompton. NZS4211 Affiliated. Customtone Kitchens 33 Progress Drive, Otorohanga, Ph 07 873 8083, contact George van Boven. Designline Limited 21 Gateway Drive, R D 4, Whakatane, Ph 07 307 0058, contacts Hayden and Rachel Boyd. Fernlea Cabinetry & Joinery Ltd Unit 3, 593 Te Rapa Road, Hamilton, Ph 07 849 4844, contact Frank Lawrence. NZS4211 Affiliated.

Fine Woodworking 1536 Main North Road, R D 5, Te Kuiti, Ph 07 878 6194, David Higgins. NZS4211 Affiliated.

Treetown Kitchens Ltd 57 Albert Street, Cambridge, Ph 07 827 7309, contact Kevin Middlemiss.

TBB Joinery Limited 51 Grey Street, Feilding 4702, Ph 022 633 2928, contact Bruce Birrell.

Prestige Kitchens 2001 Ltd 98 Molesworth Street, New Plymouth, Ph 06 759 9177, contact Mark Schmidt.

Gartshore Group PO Box 2117, Tauranga. Ph 07 578 4529, contact Bill Gartshore. NZS4211 Affiliated.

Thames Joinery (1995) Ltd 913 Queen Street, Thames, Ph 07 868 6951, contact Bruce Fulton.

The Door Shoppe 157 London Street, Wanganui, Ph 06 345 7707, contact Mark & Diane Thompson. NZS4211 Affiliated.

Rhys Powell Joinery 7A Euclid Street, New Plymouth. Ph 06 753 3822, contact Rhys Powell. NZS4211 Affiliated.

Got It Made Kitchens and Cabinetry 360 Rickit Road, Te Awamutu 3800. Ph 07 871 3998, contact Cherie van der Poel or Eric Prole.

Torrington Stairways 24 Matos Segedin Drive, Cambridge, Ph 07 827 6323, contact Brian Courtney.

Graft Joinery Ltd 32 Raywood Cres, Taupo 3033. Ph 07 378 8340, contact Craig van Velden.

Wackrow’s Joinery Ltd Gillies St, Box 150, Cambridge. Ph 07 827 5981, contact Carl Riley or Liam Wackrow. NZS4211 Affiliated.

Harker Laminates 58 Bryant Road, Te Rapa, Hamilton, Ph 07 849 7745, contact Steve Harker. HK Kitchens 144 Taurikura Drive, Tauriko, Tauranga, Ph 07 927 3092, contact Jason Smith. Hopkins Joinery 126 Taupo St, Putaruru. Ph 07 883 7951, contact Ron or Hilary. NZS4211 Affiliated. Hostess Joinery Ltd PO Box 1048, Hamilton, Ph 07 847 3099, contact Peter Clarke.

Waikato Benchtops Ltd Glasgow Street, Huntly, Ph 07 902 5353, contact Simon Curran.

CENTRAL Secretary, Louise Healey Email: louise@kbh.kiwi Al-Wood Joinery (2019) Ltd 7 Arthur Street, Pahiatua, Ph 06 376 8692, contact Gus Shilvock.

Huntly Joinery 2000 Ltd PO Box 170, 22-26 Glasgow St, Huntly, Ph 07 902 5250, email office@huntlyjoinery.co.nz. NZS4211 Affiliated.

Benchtop Surfaces Ltd 590 Tremaine Ave, P. North. Ph 06 356 9384, contact James Hurren.

Interior Fittings Ltd 23 White St, Rotorua 3010, Ph 07 348 1041, contact Josh Anderson.

Careys Joinery (1989) Ltd PO Box 229, Marton. Ph 06 327 7949, contact Shaun McDowell.

Keith Paton Joinery 15 Carters Crescent, Cambridge, ph 07 827 3249, contact Keith Paton.

Counter Concepts 16 Bisley St, Palmerston North, ph 06 355 5971, contact Graeme Andrews.

King Country Kitchens 49 King St, Te Kuiti, Ph 07 878 8820, contact Richard Pethybridge. NZS4211 Affiliated.

D-Mac Joinery Ltd 517 Lees Rd, RD5, Feilding, 4775, ph 027 457 0490, contact Drew McBride.

Kitchen Fx Ltd 801 Arthur Porter Dr, Burbush, Hamilton. Ph 07 849 2801, contact Mark Davies.

Exclusive Furniture & Joinery Itd PO Box 5038, Terrace End, Palmerston North, 4414. Ph 06 357 6429, contact Stuart Robertson.

Lee Brothers Joinery Ltd PO Box 1170, Rotorua, Ph 07 348 0620, contact Paul Ingram. NZS4211 Affiliated.

Heritage Doors Ltd 3 Muhunua West Road, Ohau, Levin, Ph 0274 418 934, contact Tod Aitken. NZS4211 Affiliated.

LPS Cabinetry Ltd 55 Miriama St, Taumarunui 3920. Ph 027 539 4702, contact Lewis or Deborah Stewart

H.R. Jones & Co. Ltd Aorangi St, Feilding. Ph 06 323 4388, contact Mark Pickford. NZS4211 Affiliated.

MAKZ Joinery 26 Alexander Ave, Whakatane, Ph 027 284 9412, contact Jamie McConnell. NZS4211 Affiliated.

Hughes Joinery Ltd PO Box 4250, Palmerston North, Ph 06 952 3581, contact Cliff Hughes.

Montage Kitchens & Joinery PO Box 5266, Frankton, Hamilton. Ph 07 8479 174, contact Jared Monk. NZS4211 Affiliated.

Jeﬀ Clayton Joinery 25 Roxburgh Cres, Palmerston North. Ph 06 357 1736, contact Jeff Clayton.

Morrinsville Industries Ltd PO Box 69, Morrinsville. Ph 07 889 5199, contact Murray Foster. NZS4211 Affiliated.

Lanwood Joinery 26 North St, Palmerston North. Ph 06 357 4757, contact Andrew Weld.

Native Timber Joinery Ltd 92 Bruce Berquist Drive, Te Awamutu, Ph 07 871 6188, contact Stuart Walker. NZS4211 Affiliated.

Mastercraft Kitchens By Healey 127 Keith St, Roslyn, Palmerston North, Ph 06 355 4646, contact Peter Healey.

Paciﬁc Coast Kitchens NZ Ltd 471 Omokoroa Road, R D 2, Tauranga, Ph 07 548 0606, contact Eric Thompson.

Murray Judd Joinery Limited 25 Station Street, Woodville, Ph 06 376 5043, contact Murray & Tessa Judd. NZS4211 Affiliated.

Plain & Fancy Furniture & Kitchens 2 Lake Rd, Frankton, Hamilton, Ph 07 847 4563, contact Michael Kenyon.

Rob O’Keeﬀe Joinery Ltd 368 Heads Rd, Wanganui. Ph 06 344 5040, NZS4211 Affiliated.

SMJ Ltd 49A Matai Street, Taupo. Ph 07 378 8049, contact Stu Martin.

Reilly Joinery 18A Parkview Ave, Feilding, Ph 06 323 3743, contact Andrew Reilly. NZS4211 Affiliated.

St Andrews Joinery Ltd 46 Mahana Road, Te Rapa, Hamilton, Ph 07 849 3050, contacts Stewart and Robert Cunningham. NZS4211 Affiliated.

Sayer Industries Limited 12 Waldegrave Street, Palmerston North Pho 06 355 8242 SB Joinery Ltd 2 Edward Street, Pahiatua 4910, Ph 027 979 0368, contact Scott Beales.

Townshends (1994) Limited 59 Makomako Road, Palmerston North. Ph 06 354 6699, contact Denise McLean. NZS4211 Affiliated. The Joiner – Leighton Judd Ltd 50 Johnston Street, Foxton, Manawatu, Ph 06 363 5119, contact Leighton Judd

HAWKES BAY POVERTY BAY

Tweakit Joinery Solutions 200 Tutaki Road, Kelvin Grove, Palmerston North. Ph 06 357 2897, contact Vaughn Tongs.

Secretary, Sue Page QSM, JP 13a Charles Street, Westshore, Napier 4110. Ph 06 835 9549. Email: masterjoinerhbpb@gmail.com

UCOL Princess St, Palmerston North. Ph 06 952 7001, contact Craig Fleet. NZS4211 Affiliated.

Awapuni Joinery Ltd 22 Parkinson Street, Gisborne, Ph 06 867 3301 contact Peter Webster.

Unique Timber Joinery 143B Gillespies Line, R D 5, Palmerston North, Ph 06 355 2654, contact James Griffin. NZS4211 Affiliated.

Alexander Joinery Ltd 55 Dunlop Rd, Onekawa, Napier 4112. Ph 06 843 2036, contact Jason Collins.

WDA Installations 12 Serenity Cres, Kelvin Grove, Palmerston North, 4414. Ph 027 443 1541, contact Craig Buckley.

Brittin Builders Ltd T/A Parkhill Joinery 475 St Georges Road South, Havelock North, Ph 06 877 7623, contact Tom Robertson. NZS4211 Affiliated. Burley Kitchens & Cabinetry Ltd 14 Lipton Pl, Onekawa, Napier. Ph 06 843 5588, contact Craig Burley.

TARANAKI Secretary, Graeme Paul PO Box 4136, New Plymouth. Ph 06 751 1111. Broadway Joinery 381 Broadway, Stratford, Ph 06 765 6829, contact Graham Podjursky. Elite Kitchens 2004 Ltd 23 Oropuriri Road, New Plymouth 4312, Ph 06 759 8221, contact Sean Rice. Hawera Kitchens and Furniture Ltd 24 Glover Road, Hawera 4610, Ph 06 278 7044, contacts Klinton Hunt / Lance Hunt. In 2 Kitchens Limited 78 Portia Street, Stratford, Ph 06 765 4058, contacts Brent and Jo Russ. NZS4211 Affiliated. Jones & Sandford Joinery Ltd 285 St Aubyn Street, New Plymouth, Ph 06 759 9251, contact Roger Jones. Kitchen Designz NZ Ltd 225-229 Courtenay St, New Plymouth. Ph 06 759 8324, contact Dan Holmes. KP Joinery Ltd 2 Dowding Place, Waitara. Ph 06 754 4726, contact Ken Parsons. MacLeod Joinery 42 Beach St, New Plymouth. Ph 06 757 8172, Kieran MacLeod. NZS4211 Affiliated. Mode Kitchens 77B Hurlstone Drive, Waiwhakaiho, New Plymouth 4312, ph 027 521 8527, contact Fraser Hall.

Cherrywood Joinery Ltd 11 PotaeAve, Lytton West, Gisborne. Ph 06 868 0971, Richard Childs. Christie Builders & Joiners 11 Husheer Place, Onekawa, Napier, Ph 06 843 6676, contact Peter Christie. NZS4211 Affiliated. Classic Kitchens (1977) Ltd PO Box 3150, Onekawa, Napier. Ph 06 843 6500, contact Larry McKenna. D Stevens Ltd 336 Childers Road, Gisborne, Ph 06 867 5700, contact Peter Claydon. NZS4211 Affiliated. European Designer Kitchens 80 Taradale Rd, Napier. Ph 06 843 7319, contact Murray Nattrass. Gemco Trades Ltd PO Box 8360, Havelock North. Ph 06 873 8756, contact Craig Russell. NZS4211 Affiliated. Green Joinery Ltd 30 Morris St, Napier, 4110. Ph 027 750 8603, contact Jae Green. Kakapo Joinery 2/19 Mersey Street, Pandora, Napier, Ph 021 0258 9617, contact Robin Holthusen Kitchen Zone 219 Stanley Road, Gisborne. Ph 06 863 2044, contact Tony & Lynda Sharp. NZS4211 Affiliated. Kevin Molloy Joinery Ltd PO Box 3251, Napier. Ph 06 843 5037, contact Simon Molloy. NZS4211 Affiliated.

New Plymouth Joinery Ltd 10 Cody Place, New Plymouth. Ph 06 758 8580, contact Roger, Paul or John Ancell. NZS4211 Affiliated.

MCL Joinery Ltd Box 320, Hastings, Ph 06 876 0252, contact John Bower. NZS4211 Affiliated.

Newton Gordge Joinery 2016 Ltd 67 Breakwater Rd, New Plymouth. Ph 06 751 5165, contact Scott Dudley. NZS4211 Affiliated.

McIndoe Kitchens 8 Carnegie Rd, Onekawa, Napier 4110. Ph 06 843 3880, contact Murray McIndoe.

Pace Oﬃce Furniture Ltd 113 De Havilland Drive, Bell Block, New Plymouth. Ph 06 755 4012, contact Lew Dickie or Bryan Frank.

Peter Norris Joinery Ltd Unit 9, 28 Edmundson Street, Onekawa, Napier, Ph 06 843 8086, contact Peter Norris. NZS4211 Affiliated.

(continued over page)

JOINERS Magazine Decem December 2021 page 81

Rabbitte Joinery Limited 807 Warren St, Hastings. Ph 06 870 8911, contacts Greg & Trudi Rabbitte. NZS4211 Affiliated.

Living Timber European Joinery & Furniture Ltd 64 Fisk Street, Naenae, Lower Hutt, Ph 04 567 2577, contact Horst Mundt. NZS4211 Affiliated.

Complete Kitchens Ltd 415 Main Road, Spring Grove, Wakefield, Tasman 7095, Ph 03 539 0055, contact Hamish Drummond.

Ashburton Joinery Limited 8 John Street, Ashburton, Ph 03 308 5059, contact James Donaldson. NZS4211 Affiliated.

Summerﬁeld Joinery 4 Innes Street, Gisborne, Ph 06 868 4236, contact Dale Summerfield. NZS4211 Affiliated

Maycroft Construction Ltd 16 Gregory Street, Lower Hutt, Ph 04 567 0014, contact Chris Fayen

Cooper Webley (2006) Ltd 64 Beatty Street, Tahunanui, Nelson, Ph 03 547 0010, contacts Noel Tait / Michelle Hill.

Bates Joinery (2008) Ltd 101 Shortland Street, Christchurch 8061, Ph 03 388 8111, contact Mark Allworthy. NZS4211 Affiliated.

Sunshine Joinery Ltd 44 Pandora Road, Ahuriri, Napier, Ph 06 844 6105, contact Rick Martin

Maymorn Joiners Ltd 247 Parkes Line Rd, Upper Hutt, Ph 04 526 6657, contact Anthony Neustroski. NZS4211 Affiliated.

Decade Homes Ltd 32a Abraham Heights, Nelson 7010, Ph 027 546 8885, contact Phil or Maree Agnew.

Bower Joinery 12a Bower Ave, Christchurch. Ph 03 388 2924, contact John Mudgway.

Waipukurau Joinery Limited 2322 Takapau Road, Waipukurau. Ph 06 858 9961, contact Greg O’Kane.

Orchard Joinery Ltd 14-18 Te Roto Drive, Paraparaumu, Ph 04 298 3380, contact Geoff Orchard. NZS4211 Affiliated.

James Neal Joinery 35 Fell Street, Grovetown, Marlborough, Ph 03 577 7872, contact James Neal.

Your Solutions Joinery Ltd 46 Ford Road, Onekawa, Napier. Ph 06 843 5954, contact Adam Satherley.

Paraparaumu Doors & Joinery 14 Manchester St, Paraparaumu, Ph 04 297 2233, contact Tony Thomson. NZS4211 Affiliated.

Matai Joinery Nelson Ltd 26 Quarantine Road, Stoke, Nelson 7011, Ph 03 547 7990, contact Greg Couper. NZS4211 Affiliated.

Brent Johnson Joinery Ltd 306 Flaxton Road, Rangiora, North Canterbury. Ph 03 313 6256, contact Brent Johnson. NZS4211 Affiliated.

Pete’s Joinery & Building Ltd 205 Main St, Greytown. Ph 06 304 9137, contact Peter Algie, Rhys Severn or Paul Coventry. NZS4211 Affiliated.

Motueka Joinery Co 2001 Ltd 20 Old Wharf Road, Motueka, Ph 03 528 9012, contacts Phil or Barb Sharkie.

WELLINGTON Secretary, Scott Nichols Email: scott.nichols@onboardnz.co.nz

Prestige Joinery Limited 140 Perry Street, Masterton, Ph 06 377 1331, contact Gregory Morgan. NZS4211 Affiliated.

Ace Kitchens & Laminates Ltd 50 Montgomery Crescent, Clouston Park, Upper Hutt 5018, contact Ivan Johnson

Renalls Joinery Limited 147 -155 High St Sth, Carterton. Ph 06 379 8008, contact Steve Ruscoe. NZS4211 Affiliated.

Amalgamated Joiners 1977 Ltd 4 Mountbatten Grove, Upper Hutt 5018, Ph 04 526 8091, contact Paul Pepper. NZS4211 Affiliated.

Stylish Interiors Ltd 29D Dragon St, Granada North, Wellington. Ph 04 473 1944, contact Mathew Gubb. NZS4211 Affiliated.

Bastian Wellington 6 Victoria Street, Alicetown, Wellington, Ph 04 576 0644, contact Sean Fitzgibbon. BM Hamilton Kitchens & Joinery 39 Park St, Kingsley Heights, Upper Hutt, 5019, Ph 021 923 231, contact Benn Hamilton. Carter-class Limited 72 Sydney Street, Petone, Lower Hutt 5010. Ph 021 246 1648, contact: Noah Edmonds. Carroll’s Joinery Limited 148 Lincoln Road, Masterton. Ph 06 377 3160, contact Richard Carroll. Commercial Joinery Wellington Ltd 232 Rongotai Road, Kilbirnie, Wellington. Ph 04 387 2050, contact Grant Smith David Barker Custom Cabinets Unit 1, 408 Hutt Road, Alicetown, Lower Hutt, Ph 027 248 8140, contact David Barker. NZS 4211 Affiliated. David Ladd Joinery Ltd 19B Broken Hill Road, Porirua. Ph 04 237 9175. Ferndale Furniture 67 Seaview Rd, Lower Hutt, Ph 04 568 7879. Goldmark Group Ltd 9-11 Jean Batten St, Kilbirnie, Wellington. Ph 04 387 8964, contact David Goldsack. Graedon Joinery 69 Pharazyn St, Melling, Lower Hutt, Ph 04 939 0405, contact Graeme Hopkirk. NZS 4211 Affiliated. Interbuild Commercial Interiors Ltd 115 George St, Stokes Valley, Lower Hutt 5019, Ph 04 939 8760, contact Neil Shackleton. Joinery Productions Ltd 457 Jackson Street, Petone, Ph 04 569 8808, contact Wayne Wilmshurst. NZS4211 Affiliated. Kitchen Distinction 15 Botany Lane, Porirua, Whitby 5024. Ph 04 232 3600, contact: Mark Spencer. L & P Crown Joinery (2002) Ltd 37 Burden Avenue Wainuiomata. Ph 04 564 8895. NZS4211 Affiliated.

The French Door Factory 14A Kingsford Smith Street, Rongotai, Wellington. Ph 04 387 7822, contact Alan Chambers The Joinery King Limited 73 Hutt Road, Thorndon, Wellington, Ph 04 473 6367, contact Tony King. NZS4211 Affiliated. Wainui Joinery (1977) Ltd 34 Burden Ave, Wainuiomata Lower Hutt. Ph 04 564 7011, contact Nikki Wynne. NZS4211 Affiliated. Well Hung Joinery 21 Lower Tyers Road, Ngauranga, Wellington, Ph 04 494 7230, contact Stephen Fairbrass. NZS4211 Affiliated. Wellington Joinery and Kitchens Ltd 8a Burgess Road, Johnsonville, Wellington. Ph 04 478 7652, contact Phil Schwartfeger. NZS4211 Affiliated. Woodhaus Joinery Ltd 54B Kent Street, Carterton 5713, Ph 022 322 0383, contact Andrew Woodhouse.

Nazareth Joinery 2017 Ltd 1 Warwick Street, Mayfield, Blenheim, 7201. Ph 03 578 8752, contact Leigh Jones. Orange Building Group Joinery Ltd 16 Nayland Road, Stoke, Nelson. Ph 03 547 9784, contact John Andrew. Re Space Limited 2 Kidson Place, Nelson 7011, Ph 03 547 1636, contact Steven Harvey or Peter Harvey. Prestige Furniture & Joinery Ltd 38 Beach Road, Richmond, Nelson, Ph 03 544 1789, contact Richard Dohmen. Ruby Bay Joinery Ltd 8 Warren Plc, Mapua, Nelson. ph 03 540 2123 contact Wayne Roberts. NZS4211 Affiliated. Simply Joinery 2018 Ltd 924 Queen Charlotte Drive, R D 1, Picton, Ph 021 126 2514, contact Glen Godsiff. NZS4211 Affiliated. The Custom Space 150 Vanguard Street, Nelson 7010, Ph 03 548 4066, contact Jack Wells. The Sellers Room 9 Echodale Place, Stoke, Nelson, Ph 03 547 7144, contact Margarette Sellers Viking Furniture & Joinery Ltd 88 Vanguard Street, Nelson, ph 03 548 0493, contact Barry Thomas. NZS4211 Affiliated. Waimea West Joinery Ltd 111 Beach Road, Richmond, Nelson, Ph 03 544 0177, contacts Kathy & Alan Gibbs. NZS4211 Affiliated.

NELSON MARLBOROUGH

CANTERBURY

Secretary, Philip Thompson PO Box 1348, Nelson 7040. Ph 03 547 1730

Secretary, Debbie Rahurahu Email: cjmasecretary@gmail.com

A K Joinery Ltd Units 3-5, 28 Dublin Street, Picton, Ph 03 573 6860, contact Andrew Kenny.

Adrian Harris Woodcraft Unit J, 3 Timothy Place, Wigram, Christchurch 8042, Ph 03 348 6996, contact Adrian Harris. NZS4211 Affiliated.

Bays Joinery Ltd 6 Tokomaru Place, Wakatu Industrial Estate, Stoke, Nelson, Ph 03 544 0087, contact George Molnar. NZS4211 Affiliated.

Advanced Joinery Ltd 27 Watts Road, Sockburn, Christchurch, Ph 03 348 7700, contact Greg Ayers. NZS4211 Affiliated.

Brightwater Cabinetmaker & Joinery Ltd 8c Merton Place, Annesbrook, Nelson 7011, Ph 03 548 6400, contact James Palmer.

Alsop Joinery Ltd 18 Alloy Street, Sockburn, Christchurch, Ph 03 348 4666, contact Paul Baker. NZS4211 Affiliated.

Building Connexion Ltd ITM Joinery, 16-18 King Edward St, Motueka, Ph 03 528 7256, contact Paul Rusbatch. NZS4211 Affiliated.

Anderson Joinery Ltd 247 Alford Forest Rd, Ashburton. Ph 03 308 2988, email: anderson.joinery@xtra.co.nz, contact Dougal Anderson.

Cantwell Joinery and Window Centre 15 Bristol Street, R D 4, Riverlands, Blenheim, Ph 03 578 3375, contact Ian Cantwell.

Architectural Joinery Ltd 82 Buchan Street, Sydenham, Christchurch. Ph 03 377 6760, contact Andrew Clark

JOINERS Magazine December 2021 page 82

Busch Joinery Limited 1737 Boundary Road, R D 3, Ashburton, Ph 027 563 4537, contact Nathan Busch Creative Joinery Ltd Unit 1/ 7 Homersham Pl., Burnside. Ph 03 358 4900, contact Wayne Brown. Don’s Joinery Ltd 43 Sandown Cres, Christchurch. Ph 03 382 0828, contact Don McClintock. Douglas Furniture Ltd PO Box 7753, Christchurch, 8240. Ph 03 377 3597, contact: Howard Nossiter. Dynamic Joinery & Cabinetry 6b Maces Road, Bromley, Christchurch, Ph 022 087 9918, contact Jeremy Smith. Elite Joinery Ltd Unit 1, 97A Sawyers Arms Road, Papanui, Christchurch, Ph 03 354 8311, contact Hayden & Sarah Illingworth. Evolution Interiors Limited 19 Stanmore Road, Phillipstown, Christchurch, Ph 03 381 1633, contact Karl Kitchingham. Finesse Joinery 423 Main North Road, Christchurch. Ph 03 352 3457, contact David Street. Hagley Kitchens 6 Nazareth Ave, Addington, Christchurch. Ph 03 961 0703, contact Nathan Moore. Homeview Building Products Ltd 772 Halswell Junction Rd, Hornby, Christchurch. Ph 03 343 9949, contact Howard Stone. NZS4211 Affiliated. Joinery by Design PO Box 19 973, Woolston, Christchurch. Ph 03 384 8461, contact Evan McLachlan & David Phillips. NZS4211 Affiliated. Joinery Concepts 2006 Ltd 25 Osbourne Street, Phillipstown, Christchurch, Ph 03 381 1066, contact Peter Robertson. LX Joinery 39A Buchanans Road, Sockburn 8042, Christchurch, Ph 03 342 9605, contact Steve Mangan. NZS4211 Affiliated. Mackay Kitchens Ltd 345 Brougham Street, Sydenham, Christchurch 8023, Ph 03 365 3988, contact Chris Moore. Misco Joinery 62 Williams St, Kaiapoi, Canterbury 7630, Ph 03 383 4384, contact Penny Abell. Modern Age Kitchens & Joinery Ltd 127 Montreal St, Sydenham, Christchurch 8023. Ph 03 365 1675 contact Grant Woodham. Modulink Screen Partitions 2012 Ltd 47 Hands Road, Addington, Christchurch, Ph 03 338 6464, contact Sam Bain. Murray Hewitt Joinery Ltd 25A Lunns Rd, Christchurch, Ph 03 343 0360, contact Murray Hewitt. NZS4211 Affiliated.

Murray Milne Ltd PO Box 356, Ashburton. Ph 03 308 8018, contact Murray Milne. MWF Manufacturing Ltd 23 Leeds St, Sydenham, Christchurch. Ph 03 365 6218, contact Gary Altenburg. NZS4211 Affiliated. Nordzco Joinery 652 Halswell Junction Rd, Hornby, Christchurch. Ph 03 348 4890, contact Wayne Melrose. NZ Doors (2004) Ltd 41 Anchorage Road, Hornby, Christchurch, Ph 03 344 2516, contacts Ron and Lisa Zwarst. NZS4211 Affiliated. Paul Renwick Joinery Ltd PO Box 11047, Chch. Ph 03 349 7049, contact Paul Renwick. R A Hale Ltd PO Box 9020, Addington, Christchurch. Ph 03 3666 909, contact Donald Bisphan. NZS4211 Affiliated. Ruben’s Joinery Limited 402 Bethels Road, 4 R D, Christchurch, Ph 03 329 5458, contact Ruben Patchett. NZS4211 Affiliated. Ryan’s Kitchens and Joinery Unit 3, 50 Dakota Cres, Sockburn, Christchurch 8041, Ph 03 348 7921, contact Ryan Butler. Sockburn Joinery PO Box 11227, Christchurch. Ph 03 342 6044, contact Tony Lemmens. Sydenham Joinery Ltd 6 Dalziel Pl, Woolston, Christchurch, Ph 03 379 6840, contact Bernie Hunt. NZS4211 Affiliated. The Joiner Shop Kaikoura Ltd 19 Beach Road, Kaikoura 7300, Ph 03 319 5562, contact Fraser Syme. Timber Doors & Windows 2007 Ltd 194 Wordsworth Street, Sydenham, Christchurch 8023, Ph 03 379 1725, contact Martyn Neville. NZS4211 Affiliated. Timber Tru Ltd 374 Ferry Road, Woolston, Christchurch, Ph 03 389 2986, contact Tony van der Plas. NZS4211 Affiliated. Trends Kitchens Ltd 34A Parkhouse Road, Sockburn, Christchurch, Ph 03 343 5242, contact James McKeown Woodshack Kitchens 113 Izone Drive, Rolleston, Canterbury 7675, Ph: 03 347 9790, contact Mark Davis.

WAITAKI Secretary, Jo Sherborne PO Box 2115, Washdyke, Timaru 7910, Ph 03 688 4783, email jo@barrettjoinery.co.nz Alpine Joinery 480 Fairview Road, No 2 RD, Timaru, ph 03 688 5748, contact Paul Butchers.

OTAGO SOUTHLAND

Mojo Modern Joinery Ltd 96 Gair Ave, Cromwell, Ph 03 445 0128, contact Craig Harrison.

Secretary, John Rigby P O Box 473, Dunedin. Ph 027 200 6840

Nigel Molloy Joinery Limited 300 Great North Road, Winton, Ph 03 236 0399, contact Nigel Molloy. NZS4211 Affiliated.

Abernethy Joinery 18 Melbourne Street, Dunedin, Ph 03 456 1654, contact Ian Abernethy. NZS4211 Affiliated.

Barrett Joinery Ltd 204 Hilton Highway, PO Box 2115 Timaru. Ph 03 688 4738, contact Mark Mitchell. NZS4211 Affiliated.

B & M Joinery Ltd 4 Ree Crescent, Cromwell, Ph 03 265 2077, contact Brendon Munro. NZS4211 Affiliated.

Duncan Joinery Limited 20 King Street, Temuka, South Canterbury, Ph 03 615 7327, contact Craig Duncan.

Coronet Woodware (2017) Ltd 99 Glenda Drive, Queenstown, Ph 03 442 3700, contact Colin Strang. NZS4211 Affiliated.

Firman Joinery Ltd 10 Endeavour Cres, Nth Oamaru Business Park, Oamaru. Ph 03 434 1561, contact Gary Firman. NZS4211 Affiliated.

Cut-it Joinery Limited 22 Clan Mac Road, R D 2, Wanaka 9382, Ph 03 443 5031, contact John Titterton.

Geraldine Timber Products 27 High Street, Geraldine, Ph 03 693 9598, contact Paul Autridge. NZS4211 Affiliated. J E Dennison Ltd 5 Redruth St, Timaru. Ph 03 688 0029, contact Gary Dennison. NZS4211 Affiliated. JMAC Joinery Ltd 7 Laughton Street, Washdyke, Timaru, Ph 03 688 2725, contact Craig Mason. NZS4211 Affiliated. Joinery Zone 2012 Ltd 110 Fraser Street, Timaru. Ph 03 688 8223, contact Warren Atwill. NZS4211 Affiliated. Lunds Joinery Ltd 33a Grants Rd, PO Box 128, Timaru. Ph 03 688 9149, contact Mark Albert. NZS4211 Affiliated. McMaster Joinery Leonard St, Waimate. Ph 03 689 7557, contact Des McMaster. NZS4211 Affiliated. Millennium Joinery Ltd 2 Regina Lane, Oamaru. Ph 03 437 0227, contact Michael Sandri. NZS4211 Affiliated. Paterson Joinery 307 Rosewill Valley Road, Timaru. Ph 03 688 7060, contact Alan Paterson. Rycole Joinery 44 Homestead Road, 1 DRD, Oamaru, Ph 03 434 5012, contacts Darryl and Adrienne Whitburn NZS4211 Affiliated. Tony Boyce Builders & Joiners Ltd Washdyke Flat Road, Washdyke, Timaru, Ph 03 688 2181, contact Tony Boyce. NZS4211 Affiliated.

Elite Joinery Solutions 54 Mersey St, Gore 9710, ph 03 208 5819, contact Regan Hughes. Fiordland Joinery 10 Caswell Rd, Te Anau, Southland 9600, Ph 03 249 4339, contact Simon Irwin. Formatt Bespoke Joinery Co Ltd 19 Glenda Drive, Queenstown. Ph 03 441 4944, contact Reuben Bogue. NZS4211 Affiliated. Gavin Player Furniture & Joinery Ltd 14b Chardonnay Street, Cromwell, Ph 03 445 8136, contact Gavin Player. Howley Joinery Ltd 224 Mersey Street, Invercargill, Ph 03 214 1055, contact Glen Howley. NZS4211 Affiliated. JP Quality Kitchens Limited 66 Vogel Street, Dunedin, Ph 021 474 300, contact John Peddie. Joinery Specialists 1997 Ltd 608 Kaikorai Valley, Kenmure, Dunedin, Ph 03 488 2371, contact Graeme Emmerson. Leading Edge Joinery Specialists Ltd 13 Surrey Street, Gore, Ph 027 6774 729, contact Donald McGuigan. NZS4211 Affiliated. Leith Joinery 2 Roberts St, Dunedin. Ph 03 477 0115, contact Peter Leith. NZS4211 Affiliated. Masterwood Joinery 2008 28 McNulty Road, Cromwell, Ph 03 445 0313, contact Dave Wilson. NZS4211 Affiliated. Mearns and Leckie Limited 7 Gow St, Mosgiel 9024, Ph 03 489 2024, contact Matt Fuehrer. NZS4211 Affiliated.

O’Brien Group 2012 8 Gow Street, Mosgiel, Ph 03 489 3849, contact Peter O’Brien. Pooles Joinery Ltd 22 Bay Road, Invercargill, Ph 03 215 9167, contact Peter Fisher. NZS4211 Affiliated. Queenstown Joinery 53 Industrial Place, Queenstown, Ph 03 442 7555, contact Kevin Harradine. NZS4211 Affiliated. Riversdale Joinery Ltd Liverpool Street, Riversdale, Southland 9744, Ph 03 202 5527, Barry O’Connor. NZS4211 Affiliated. Ron Kirk Joinery Ltd 403 Kaikorai Valley Road, Dunedin, Ph 03 453 5718, contact Hayden Kirk. NZS4211 Affiliated. Steadfast Joinery Limited 41 Ward St, CBD, Dunedin 9016, Ph 03 470 1990, contact Leroy Cunningham. Stevenson & Williams Ltd Joinery PO Box 4007, Dunedin. Ph 03 455 4034, Email: gary@stevwill.co.nz. contact Gary Turner. NZS4211 Affiliated. Steves Joinery Ltd 22A Margaret Place, Frankton Industrial, Queenstown, Ph 03 442 3206, contacts Stephen Walak, Amanda Trainor. NZS4211 Affiliated. Stewart Construction Ltd PO Box 2125, St Kilda. Ph 03 455 2057, contact Barry Taylor. NZS4211 Affiliated. Treebay Manufacturing Limited 17 Jutland St, Dunedin Central, Ph 03 453 0340, contact Brian Daken. Wanaka Joinery & Glass Ltd 52 Ballantyne Road, Wanaka, Ph 03 443 7890, contact Jason Fisher. NZS4211 Affiliated. Wedgerwood Joinery Ltd 11 Ngapara St, Alexandra. Ph 03 448 8832, contact Russell Mair. NZS4211 Affiliated. Withers Joinery 78 Factory Rd, Mosgiel. Ph 03 489 4179, contact Paul Crawley. NZS4211 Affiliated. Wood Solutions PO Box 2443, Dunedin. Ph 03 479 2323, contact Andrew Bellamy. NZS4211 Affiliated.

Master Joiners National Associate Members Acero Limited www.acero.co.nz

Carters www.carters.co.nz

Henkel NZ Ltd www.henkel.com

Marbello International Ltd www.marbello.com

Thermawood www.thermawood.co.nz

Advanced Engineering Services www.aesparts.co.nz

Choice Energy www.choiceenergy.co.nz

Herman Paciﬁc www.hermpac.co.nz

Metro Performance Glass www.metroglass.co.nz

Allegion (New Zealand) Ltd www.allegion.co.nz

Cosentino New Zealand Ltd www.cosentino.com

Hettich New Zealand www.hettich.co.nz

Miles Nelson MF Co Ltd www.milesnelson.co.nz

Tunnicliﬀe Timber Solutions 2018 Ltd www.tunnicliffes.co.nz

Architectural Hardware Supplies www.ahs.co.nz

Crombie Lockwood (NZ) Ltd www.crombielockwood.co.nz

Homag www.homag.com

Mirotone NZ Ltd www.mirotone.com

Artia (Coventry Group NZ Ltd) www.artia.co.nz

Daiken New Zealand Limited www.daiken-nz.com

KLC Limited www.klc.co.nz

Nelson Pine Industries Ltd www.nelsonpine.co.nz

ASSA ABLOY New Zealand Ltd www.assaabloy.com

Elite Hardware Ltd www.elitehardware.co.nz

Joinery IT www.cabinetvision.co.nz

New Zealand Panels Group www.nzpanels.co.nz

Biesse Group New Zealand www.biessenewzealand.co.nz

Enko Group Ltd www.enkogroup.com

Knobs ‘n Knockers Ltd www.knobsnknockers.co.nz

Onboard New Zealand Limited www.onboardnz.co.nz

Blum NZ Ltd www.blum.com

Glass Half Full www.glasshalffull.co.nz

Laminex New Zealand www.laminexnewzealand.co.nz

Resene Paints Ltd www.resene.co.nz

Breezway www.breezway.co.nz

Häfele NZ Ltd www.hafele.co.nz

Leitz Tooling NZ Ltd www.leitz.co.nz

Rosenfeld Kidson & Co Ltd www.rosenfeldkidson.co.nz

Burns & Ferrall www.burnsferrall.co.nz

Halswell Timber Co Ltd www.halswelltimber.co.nz

Machines ‘R’ Us Ltd www.machinesrus.co.nz

Seearco Industrial Abrasives www.seearco.co.nz

Unique Hardware Solutions Ltd www.uniquehardware.co.nz Viridian Glass www.viridianglass.co.nz W & R Jack Ltd www.jacks.co.nz Wurth New Zealand Ltd www.wurth.co.nz

JOINERS Magazine December 2021 page 83

STATE OF THE INDUSTRY Reports from Branch Presidents November 2021

continues to be an issue in the Region. Qualiﬁed staﬀ are hard to come by. Training is the way to go. We continue to have a steady stream of apprentices signing up which is fantastic.

AUCKLAND / NORTHLAND Since our last update in August, Auckland joiners have been restricted by Covid. With 5 weeks of level 4 lock down and now operating in level 3 for the past 7 weeks, with looking like we will be in level 3 at least until 29th November when the government reviews the settings depending on the vaccination rates. Operating at Level 3 and having Covid in the community is causing all sorts of headaches for our businesses, from difficulties in doing business in general, supply of materials and lose of production hours as staff must isolate for 14 days being a close contact. Also we have companies where the workers are not permitted to cross the border daily, so currently not working and no subsidy is available from the government. Vaccination is all the talk of the town, with some building site and suppliers indicating that they will only allow people double vaccinated on their site. Thus, causing a lot of decision in Joinery companies if you can force your employees to get vaccinated or not, knowing joiners are hard to come by and no one wants to terminate employees. Shortages of timber supplies is still a bit of a mixed bag with finger jointed pine products coming back online along with pre profiled timber sections. On the other hand Cedar supply is still under pressure with some sizes required for double glazing now not available till March 2022. All in all, the industry is looking positive with plenty of activity being reported in the near future. - Rob Pickup CANTERBURY The Canterbury region is continuing as the rest of the year has gone, with extremely high workloads and staffing pressures. Most of our members are fully booked for this year and well into next year. Some supplies are still difficult to get for some of our members, organisation and planning ahead is a must when

It is going to be a busy a run into Christmas this year. We all need to keep an eye on each other and offer support where we can. I know everyone will be looking forward to the annual close down and some quality time with our families. - Kristine Holmes Auckland Regional winner 2021 Master Joiners awards from Cube Dentro.

ordering. Our members are busy getting photos and boards ready for our 2nd local Canterbury Master Joiner awards in April next year. This will be another great social occasion for our members and associates. We had a very strong response to our Canterbury pay rate survey. With a good mixture of small, medium and large business completing the survey. Ian Featherstone of Glass Half Full compiled this for us and it was great to have him present the results on zoom to all the members who participated in the survey. Members commented that this information would help them in their future planning. The recent Master Joiners survey about retirement age of our members is a big concern looking forward to the future. Of the 120 members that completed this survey, a quarter were due to retire in the next 10 years. This is very scary. We need to come up with ideas about how to address these issues and start thinking about succession plans. On the farm, cool and wet spring weather has meant that grass and crops have been slow. But it has ﬁnally warming up and things are starting to grow. Wishing everyone a very merry Christmas and hope that you all are able to take a well deserved break over this time before heading into another crazy year. - Nathan Busch

JOINERS Magazine December 2021 page 84

CENTRAL There hasn’t been a whole lot of change since my last report. The Central Region is still facing high demands for new builds and also renovations. Top of the list for most people at the moment is to upgrade their kitchen. This is causing most of our members to use a waiting list system or just turning people away. Some of our specialist joiners are managing to plug the holes with little jobs that have been on the back burner for months – so this is positive. The fall-out from Auckland staying in Level Four for longer than the rest of the country is really showing now. Most new builds are now behind schedule. This has caused holes in production for our members, that they are not able to fill at the drop of the hat due to the lead time on materials. This along with trying to keep stock levels higher than normal is hurting cash flow. A lot of us are facing battles with trying to get colour selections from clients a lot earlier than usual – months out from production, to secure the product for them. It would also be great if suppliers in Auckland were able to explore back-up plans/options for getting stock to customers outside of Auckland should there be another lockdown. News from Immigration on Visa holders being able to apply for Residency with less obstacles in their way was amazing. Staffing

HAWKES BAY / POVERTY BAY Covid Xmas around the corner and Summer is knocking on the door, things are warming up in ‘the Bay’. The Magpies are on fire at the top of the NPC. Property prices are also on fire in ‘the Bay’, soon to be dampened by the Government ... time will tell. Most if not all HB/PB Master Joiners are cranking along, provided the short comings of supply aren’t holding jobs up with materials. This has been an ongoing trend over the last year or more making it hard to understand when we will get to the other side of it. My Spidey senses say it’s going to be like this for some time. Gone are the days of ordering just in time per job, carrying stock seems to be the way forward. Staffing numbers seem to be a go to topic of discussion. Training seems to hit a note with leading us out of this. The Government Apprenticeship Boost has helped getting the initial numbers, further support will be needed. Relying on the pool of Tradesmen already in our industry is not sustainable for our future. We enjoyed a good turn out at our combined Mid-Winter Xmas Dinner and AGM during the winter where we acknowledged Murry McIndoe past president and strong supporter of MJ. Murray input was and will always be appreciated at our meetings. Let’s hope he calls in when he’s not Camper vanning around. Our next meeting, we are off land yachting. - Greg Rabbitte

TARANAKI Well, with the warm weather and these longer days, it is great to spend sunny evenings with the family. Now it’s November and only 8 weeks to Christmas, so where has the year gone? I suppose we were all a little shocked going into lockdown in the middle of August, as this gave us no time to organize anything, barely enough time to get ourselves home if we were away.When we did return to work, trying to remember what orders were due, and where things were at, was hard enough, but also having Auckland closed made things really difficult. Most suppliers were distributing things evenly, to ensure they was enough product to supply everyone, and keep them in production. Once Auckland did open under Level three, it took time to get the freight moving so the supply chain was moving but slowly. This did cause freight problems, which meant goods that would usually arrive in a couple of days, were now taking up to 10 days to arrive at Taranaki Joinery company’s. Now with the run into Christmas most members have reported being busy. I think the key to success at this time of year and to be prepared for the New Year, we need to be really organised, making sure materials and goods are ordered early enough, to be available when they are needed. Sometimes other trades have held us up with deadlines not being met, which means our timeframes are put out. The other trades are also affected by material shortages and freight delays. They are in the same boat as us, so patience and understanding are required, although this can be a challenge. Most of us have full factory’s of kitchen and other joinery product waiting to be installed, any delays cause problems and then rescheduling can prove to be difficult. Finding staff is an on-going headache that our sector faces. There are very few qualified

tradespeople around, even ﬁnding a young person ready to give the joinery trade a go, is tough.We now need to think outside the square and try to attract people to the industry, succession planning. Most Taranaki building trade companies report being busy, with some even being booked out up to a year in advance. So lets hope we get to level 1 before Christmas and we can enjoy a good Christmas with family and friends, and have a good break to recharge the batteries for a busy year in 2022 - Bryan Frank WAIKATO / BOP Overall, the Waikato/BOP region is experiencing a boom of activity. Residential construction at all levels continues to grow and the renovation market is also strong on the back of consumers not travelling and low interest rates. Plenty of activity in infrastructure and civil works projects in most areas also. Members are reporting confirmed workloads well into the 2nd quarter of 2022 and some into 2023. The usual mid year peak around May-July came later this year as a result of supply chain and COVID restrictions disrupting project timelines. Some Members noted a short spell of ‘consumer jitters’ with the arrival of the Delta variant. Despite this, enquiry remains strong going into 2022. Navigating changing COVID restrictions and borders to get materials delivered and our people to and from work sites has been hugely challenging of late. Scheduling production and managing workloads remains a time consuming and demanding process. Members are preordering and holding higher than normal inventory in an attempt to mitigate this as much as possible. In general, most consumers are understanding of delays where there is good communication. Skilled staﬀ shortages remains one of the most challenging aspects of managing the demands on our businesses going forward.

Sadly, we had to cancel our Apprentice Awards event for the 2nd year in a row. Fingers crossed that things settle down soon so we can have our annual Ken Monk Fishing Trip in February. This is always a popular event for the Members and a great way to remember the legacy of Ken. Despite all the challenges the world has been throwing at us in the past 2 years, our Members are still feeling lucky and optimistic. - David Higgins WAITAKI The Waitaki area has been in constantly busy over the last few months with most members having full work books stretching into the new year. Despite the obvious issues that are being endured nationally and globally it would appear that the construction industries requirement for joinery has only grown both residentially and commercially in the Waitaki. There are many opportunities for pricing which is putting many estimators in a very busy position with a lot of members pushing work out into the 2022 working year and having to miss opportunities by declining tenders. With a number of Workshops working on Ministry of Education contracts and Ministry of Health contracts the requirements regarding vaccinations have had several members discussing how best to manage their staff around this work moving forward, several main contractors have sent out information to this affect and will require confirmation that the staff we send to site comply with this mandatory requirement.

suppliers constantly sending out increased pricing notifications, it’s been interesting to hear from some main contractors that they have been told that their timber framing for future contracts will not be available until June 2022 due to a lack of timber available for pre nail framing companies. Potentially having a negative flow on effect of pushing programmed joinery supply out further than anticipated or planned. Pricing for many contracts need reviewing frequently as price increases for products can change monthly requiring deposits in advance or materials held off site agreements, to secure products early enough and at the price used at tender time. Quote validity periods are constantly being reviewed, all of the members indicate that clients are generally paying on time with few outstanding debts held, however many members are fielding calls from potential clients who are asking for joinery to be priced and supplied this year, time frames that are un-achievable. In conclusion the Waitaki area seems to be coping well with the end of the year looming up very fast, once again most members are looking forward to mid 2022 for new work with a number looking out further than that . The Waitaki Joinery Manufactures members are thankful for the support of their clients in 2021 and are looking forward to the challengers that a new year has instore. - Gary Firman 

Finding good staff is still an issue with experienced tradesman and installers extremely difficult to find many members are working hard to source suitably motivated people to fill apprenticeship roles in their factories. Material and Supply chain issues are very much becoming a cause for serious concern with subcontractors shutting down supply earlier than usual and

JOINERS Magazine December 2021 page 85

The Designers of NKBA came about through a merger of the Certified Designers Society designer members and NKBA designer members.

a wrap on a turbulent year A

s 2021 comes to a close, many will be happy to see the end of what can only be described as a turbulent year, including those in the kitchen design and manufacturing industry that have been working at an extreme pace while balancing supply and demand issues and Covid restrictions. For the NKBA, 2021 has seen a significant change with the forming of Designers of NKBA. This is a merger of the Certiﬁed Designers Society Designer Members and NKBA Designers. This merger will provide greater opportunities, resource, promotion and development for all of our designers and it promises a bright, inclusive, and sustainable future for our proud membership. As a result of the merger, we introduced a new model for our Continued Professional Development and also a tiered system for all Designers of NKBA. This will ensure better transparency for all designers and the general public. We hope these changes will encourage a greater level of professionalism in the industry. To ﬁnd out more about Designers of NKBA call the NKBA Head Office on 03 322 1957

new membership applications and assisting with our education programme. She has already become a valued part of our team. I am also pleased to announce that Rachael Kwok is moving to a position as Operations Manager, to further assist Suzie Rees in her role as Executive Oﬃcer.

2021 was a record year for NKBA. We had a record attendance at our National Conference and Awards with a record number of ﬁrst-time attendees. Students registering for our National Diploma in Kitchen and Bathroom Design was also at a record high. In my mind, all these records suggest one thing – NKBA members are committed to our industry and see huge beneﬁts from engaging with our organisation. We see this as just the beginning and we look forward to even greater growth in 2022. This year we were delighted to welcome Caitlin Adams to the NKBA Head Office team. Caitlin is our new Education and Membership Administrator and is responsible for processing

JOINERS Magazine December 2021 page 86

I want to ﬁnish this 2021 wrap up with some reasons I believe NKBA is of value to our designers and manufacturers that work in joinery businesses. This is a very important and valued group to NKBA and we are always looking at ways to strengthen these relationships. 1. NKBA provides education opportunities that will help further develop design skills. If you, or your team are looking to develop a greater knowledge of design, NKBA provides regular courses, webinars and resources to upskill in this area. We also offer our National Diploma in Kitchen Design – which is recommended for all aspiring and experienced professional designers. Don’t forget there are currently “No Fees” for learners or employers with the Government covering the cost of all apprenticeships for new and existing apprentices via BCITO.

2. We o f f e r n e t w o r k i n g opportunities for manufacturers, as well as designers. Our strong base of manufacturer members is on the rise and engagement levels are high. Networking is important for professional growth and encourages greater wellbeing. 3. Our NKBA Excellence in Design Awards programme includes a Manufacturing Craftmanship Award, and acknowledgment for the manufacturer of the Supreme Aw a r d - w i n n i n g p r o j e c t s (providing the manufacturer is a NKBA member). This oﬀers an opportunity to celebrate your highest standard of workmanship. 4. We are here to support all members and are open to exploring new opportunities, courses and resources to improve our membership oﬀering for everyone. Thank you and have a restful Christmas and New Year’s break. Nick Thompson President of the National Kitchen and Bathroom Association NZ.

MINIPRESS top with EASYSTICK

We’ll be giving away a free 12 months subscription courtesy of 3D Kitchen™ with every issue of JOINERS Magazine!

Tired of working like a machine?

Order one to do the work for you. MINIPRESS top isn't just the future of assembly devices. Combined with EASYSTICK and used with Cabinet Conﬁgurator - it's the next generation of the entire manufacturing process. Transfer plans and data from our complimentary E-SERVICE Cabinet Conﬁgurator through a USB. EASYSTICK will do all of the calculations for you to produce accurate results in record time, speeding up the complete assembly line of cabinets and making it a breeze to carry out central line and horizontal drilling on your MINIPRESS top machine. Create finely crafted pieces of furniture with MINIPRESS top and EASYSITCK, with little to no room for error and produce precise results every time. But don't just take our word for it. "EASYSTICK has made the manufacturing process a lot quicker and easier for our small business that doesn't have a CNC machine." - Cameron, Scott's Joinery.

"EASYSTICK has definitely sped up our manufacturing process and made things a lot more accurate." - Nathan, Busch Joinery Ltd. MINIPRESS top drilling and insertion machine with EASYSTICK pre-installed is now available to order in New Zealand! Contact your Blum Account Manager to ﬁnd out if MINIPRESS top is right for your team. 

JOINERS Magazine December 2021 page 87

ADVERTISER INDEX It’s the perfect design & machining software for people producing: Kitchens Office fit-outs Built-in Wardrobes Interior Joinery

Technical Machinery Services Ltd NZ Agent for Holzher machines, new sales, spare parts & service. • • • • •

info@polyboard.co.nz

Mike French - 021 353 632 Rajan Pillay - 021 504 929

www.polyboard.co.nz

Metal

Stone

Plastic

Supply new: HSD, COLOMBO, OMLAT etc. HSD spindle repair specialists info@alphacam.co.nz www.alphacam.co.nz

SPINDLES NZ LTD

P: 09 947 - 4288

$4,674.00(excl gst) 3d design, price & cutting lists included

Additional Modules available Kray Rendering - Virtual Reality CNC Link

www.pro100.co.nz

All About Labels

Amorini

Archant

BCITO

Carters

Share your project with anyone that needs it. Project managers, employees, factory ﬂoor, installers and more. Give Technical Validation, your drawings viewed in a web browser. Phil Smith 021 201 4450 info@joineryit.co.nz joineryit.co.nz

9 Larges Lane, Nelson mobile 021 023 89028 email info@spindles.co.nz

www.spindles.co.nz

Architectural Product Manufacturer - Wellington Profitable and Primed for Growth - Earnings $250,000 (YTD SEP) Established in 2017, this business is a niche manufacturer of a high-value 'functional' architectural product. The product is required in every home, with substantial commercial application also. The founder has invested heavily in the most modern computerised manufacturing equipment including a CNC machine, and the hard start-up yards are now coming to fruition, with FY22 forecast earnings (EBPITA) of over $450,000 (YTD September is $250,000). The business will suit a practical hands-on individual, or this business would make a wonderful bolt-on for an existing manufacturer of architectural products.

Contact Gerard Dunne - 027 220 8277 or gerard@abcbusiness.co.nz for further information.

JOINERS Magazine December 2021 page 88

44,45 41 5 55

Egmont Air

Filtercorp

Fit FSB Group Hafele (NZ) Ltd

12,15 22,23,53 65 ifc,1

Halliday & Baillie

Halswell Timber

Hettich

Hideaway Bins

Homag

31,59

Hutchco

JNL

Joinery It

ibc

Katalog

Laminex

Leitz

Machines R Us

Nelson Pine Industries

NZ Duct & Flex

NZJMF

NZ Panels Group

One Finance

PPG

Proform

PSP

Resene

The owner will provide transition assistance as required.

DBNZ Coatings

Fisher & Paykel

BUSINESS FOR SALE 3D Design & Manufacturing Software from as little as ...

Burns & Ferrall

SEE OUR NEW PRODUCT Spindle Repair, Servicing & Refurbishment, balance & test as standard

Airtight Solutions

Blum

Showroom (by appointment) 6b Earl Richardson Ave, Wiri

The total CAD/CAM solution for all your manufacturing of

Biesse Group

sales@techms.co.nz

P: 09 947 - 4288

Wood

Edgebanders CNC Machining Centers Vertical Panel Saws Pressure Beam Saws Panel Handling

3D Kitchen

Sage Doors

Titan Furniture

Treotham

Viking

W & R Jack

37,obc

TO BUILD A REPUTATION FOR CREATING HIGH QUALITY 3D RENDERS, USE OURS for kitchen designers, interior designers and architects

Get a virtual 3D walkthrough of your project

SHORT ON TIME? WITH VORTEK SPACES, TURN YOUR PROJECTS INTO 3D WALKTHROUGHS IN MINUTES.

vortekspaces.com/freeproject21 * Share your project and moodboard and you will see yourself with images and videos created exclusively for you.

CHECKOUT OUR NEW ANIMATION FEATURES !

IMPORT FROM YOUR FAVORITE SOFTWARE CABINET VISION

Phil Smith 021 201 4450 info@joineryit.co.nz www.joineryit.co.nz

FREE

Kappa 550 premium range Redefining performance, productivity and safety in Panel Saws

SAFETY FIRST!

*Guarding removed for publicity purposes

WORLD INNOVATION: PCS® Prevent accidents on a Panel Saw with the revolutionary Preventive Contact System (PCS)

PCS detects hazards before contact with the saw blade.

0800 522 577

PCS eliminates the hazardous situation in milliseconds.

PCS is ready to be used again at the push of a button.

www.jacks.co.nz

Available on FORMAT-4 kappa 550 Panel Saws

Joiners Magazine December 2021

Articles inside

Due Process

Master Joiners

Steering a Course