RESOURCE
& WASTE MANAGEMENT EXPO
LIMITED FREE TICKETS AVAILABLE
EXTEND ENGINE & HYDRAULIC OIL & FILTER CHANGES TO JUST ONCE YEARLY ON MOT
THERE IS NOW A COMMITMENT STRATEGY TO DEVELOP AND IMPLEMENT PLANS TO TRANSITION VEHICLES & EQUIPMENT TO ZEV’S (ZERO EMISSION VEHICLES)
DIESEL OR ELECTRIC WITH HYDRAULICS; WHAT EASIER WAY TO ENHANCE THAT PLAN THAN TO SIMPLY ADD BY-PASS OIL FILTRATION?
Increase system reliability • Reduce component wear • Extend oil life to generate CO2 saving
Ensure oil cleanliness to Extend oil life
What is by-pass filtration?
Natural Cellulose Depth By-pass oil filtration – has an ultrafine, slow principle of cleansing and drying oils.
With an installation not dissimilar to a ‘kidney’ it takes a small feed of oil – cleans it to levels far finer than anything else, and returns it to tank, so as a constant cleansing pass the tank or sump, the lines and any parts in flow such as pumps and valves become clean of all contaminants.
By continuously filtering just a small percentage of oil to far finer levels than standard filters; it removes particulates, sludge and moisture that would normally be missed, and with modern fine machine tolerances, could cause system damage, wear and corrosion. At such a very slow and deliberate speed, it is possible to remove particles down to 1 micron (3 absolute), and remove 99.95% of all water. Removing such contamination slows down oil degradation so protecting its condition far longer.
How it works
Install a Bypass System at the time of a complete oil & filter change – then on your normal oil change – JUST change the by-pass replacement cartridge, nothing else! Then change all 3 at an agreed interval – normally once yearly. By eliminating water and particle contamination, you can extend engine oil life up to 5 times and hydraulic oil up to 10 times. Alternatively – a mobile system can be used to clean hydraulic oil, in tank, to ‘as clean as new oil standard’ ISO 18/16/13; on a routine basis, alongside condition monitoring.
The Carbon benefits
• PRIMARILY OIL SAVINGS – What was your oil spend last year? Consider if every machine on your site was to just double its oil life? You would half your oil consumption; as a finite resource and equally half your oil wastage, contributing to carbon savings throughout the entire supply chain.
• PARTS SAVINGS – Through constant cleanliness = less abrasion = better operation = equipment lasts longer, with less ‘blockages’, sticking valves or failing pumps… pumps seem to be an accepted consumable and they shouldn’t be if looked after properly – all these ‘replacement parts’ if reduced; contribute to not only financial but carbon savings throughout the supply chain.
• LABOUR & DOWNTIME – A simple 5 minute cartridge change, as opposed to oil drain and filter changes minimises downtime and labour costs.
• EFFICIENCEY – Cleaner, better operation will result in less downtime and interruption.
Cellulose depth is the only affordable filtration to effectively remove moisture and particulates in one process.
Remove DIRT & WATER in the same mobile application
Affordable and easy to change out replacement cartridges
Kind to the planet – as a natural, sustainable product
Save waste costs, replacement value and labour
Simple ‘plug and play’ application
Site permanently on a problematic machine or on a rotational cleanse across your fleet
Whether it be to tackle one off contamination issues, or as a permanent fix to heavy use equipment to protect pumps, valves & cylinders etc.. or as a rotational cleanse on off-hire equipment.
KLEENOIL offer a completely free trial at your site ; with before and after independent oil analysis.
CUT WASTE AND BOOST YOUR PROFIT WITH BLAKERTECH
BlakerTech specialises in designing and manufacturing equipment for the metal recycling industry, providing reliable solutions that recover substantial volumes of non-ferrous metals from dry recyclables. Our global success is rooted in our commitment to reducing landfill waste and mitigating the escalating costs of waste disposal.
Introducing the MagThro™ eddy current system
Our flagship product, the MagThro™, stands out as a high-energy magnetic recycling system built from premium components. Engineered for dry processing, it excels in extracting nonferrous metals from mixed materials. Key features include:
• Constructed with high-grade components
• Equipped with 12-pole magnet shafts
• Utilises powerful neodymium rare earth magnets for efficient metal separation
• Fully adjustable eccentric rotor to maximize magnetic force and recovery rates
• Available with two or three-way splitters to suit diverse operational needs
• Robust framework with accessible walkways for simplified maintenance
• Multiple belt widths: 500mm, 750mm, 1,000mm, and 1,250mm
• Environmentally friendly dry process with zero contaminated effluent
Success stories with BlakerTech
Our dedication to excellence is exemplified by the strategic investment of one of our clients in enhancing their processing line’s efficiency. Impressed by previous results, they purchased two additional MagThro eddy current systems. These newly designed processing lines, each one metre wide, feature advanced components including feed hoppers, vibrating feeders, drum magnets with twin splitters and our powerful MagThro eddy current separators. Additionally, a twostage separator hood complements the system, further enhancing its capabilities. Integration of these lines has significantly increased separation efficiency and throughput at their recycling facility, underscoring our commitment to delivering industry-leading solutions that enhance operational efficiency and profitability.
TURNING WASTE INTO PROFIT
Efficient and cost-effective metal recovery
Recovering high-value metals and minerals from non-ferrous scrap is a pivotal opportunity for processing plants to increase profitability and reduce landfill waste. Our SandFlo fluidised bed separator and MagThro eddy current system, meticulously hand-built at our UK facility, offer durable, reliable, cost-effective and eco-friendly solutions. The SandFlo excels in efficiently separating aluminium from mixed non-ferrous materials to below 5mm, ensuring high recovery rates without generating by-products.
Our robust MagThro system complements this with an exceptionally high-energy magnetic recycling capability. Installed in 14+ countries globally, our products demonstrate outstanding quality and performance. For more details or to arrange a demonstration, please contact our team.
l High recovery performance
l Easy to use, reliable and robust
l Dry process solutions, no by-products
l Individually built in the UK
l Installation and full training provided
UNSAFE DISPOSAL OF ELECTRICAL ITEMS CAUSES DAILY FIRES:
VEOLIA
URGES CAUTION TO KEEP PEOPLE SAFE
Veolia, the UK’s leading resource management company, has launched a UK-wide campaign to combat a rise in fires across its operations that has reached, on average, one preventable fire every day. The campaign aims to educate the general public on the dangers of certain waste items and how they put the people who handle waste in danger as well as cause damage to vital recycling infrastructure.
The fires occur across the country in Refuse Collection Vehicles (RCVs) in residential areas and in waste management facilities, due to residents putting dangerous items in their recycling or rubbish bins and on-street litter bins. This puts both Veolia staff and the general public in direct danger.
The campaign videos, published across social media, contain real footage of the fires and explosions caused and focus on the danger of four items that are commonly misplaced in household bins and how they can impact the people who collect, sort, and process waste.
Used vapes should be taken back to retailers, never placed in household recycling or rubbish bins or in on-street litter bins.
Electrical items – items with batteries, plugs, cables, or hidden batteries such as those found in children’s toys and electrical toothbrushes - can be recycled but they must be handled safely at dedicated facilities. Residents can find local recycling points at: recyclenow.com/recycling-locator Batteries can be easily recycled at dedicated recycling points, which can be found at:
recyclenow.com/recycling-locator
Gas bottles and nitrous oxide (Nox) canisters need to be handled safely during disposal. In most cases, residents needing to dispose of gas bottles or canisters can take them to their local Household Reuse and Recycling Centre, but this should be checked locally. Vapes, electrical items, batteries, and gas canisters become extremely flammable when they are crushed. This puts both collection crews and the staff at recycling and waste sorting and processing facilities
at risk of burns, chemical exposure and smoke inhalation – injuries that can be life-changing. It also causes damage to vital recycling infrastructure.
Residents can visit veolia.co.uk/ dangerous-waste to watch real footage of what happens when dangerous items enter the waste stream and learn more about how to safely dispose of these materials.
Cory Reynolds, Director of Corporate Affairs, Veolia UK, Northern Europe Zone, said: “At Veolia we pride ourselves on carrying out essential services whilst putting safety first in the workplace, and we do not accept our people or the communities we serve being put in danger. This campaign is necessary to educate residents on how to ensure their waste is safe, and we ask everyone to make these simple changes that will greatly decrease the chance of fires in collection vehicles and sorting facilities. This will have a huge impact on keeping the vital industry we work in safe and ensure that the people that handle waste are kept out of harm’s way whilst protecting the valuable materials residents work hard to separate for recycling.”
Veolia records one preventable fire a day from residents putting dangerous items in bins
The campaign aims to raise awareness of the danger real people face from vehicle and facility fires
Residents should not put vapes, electrical items, batteries, or gas canisters in the bin as they are extremely flammable when crushed
Veolia carries out around 500 million collections a year
HEAVY DUTY GRANULATOR
(HDG160 / HDG200 / HDG240)
Modified for recycling of tough material, e.g. ASCR cables, Cu scrap og Al cables, low-grade cables with some impurities, non-ferrous metals, industrial waste, etc. The new knife system with rotary knives/knife holders integrated with the rotor makes a solid foundation for resistance towards heavy objects. The knives are straight and can be used on all four sides and easy to grind. The screens are easy for the operator to handle with no need to use a crane. The HDG can be used as a prechopper for cable and the output can be fed straight to granulators.
• Adjustable knife clearance optimizes the cutting function.
• The knives can be reground multiple times on a “flat-bed” grinder ensuring long life and low operation costs.
• Designed for quick and easy change of knives and screens.
• The rotor is manufactured and designed for minimum wear with hard-face welding.
• Screens with different hole sizes are available for flexible production.
• Five pieces of screens per set and interchangeable depending on wear.
• Exchangeable wear parts give you a virtually indestructible machine.
• Large fly wheel to minimize current spikes.
BETONBLOCK®: MARKET LEADER IN CONCRETE MOULDS ANNOUNCE THE LAUNCH OF THE CDT®, INNOVATIVE CONCRETE DRIVE THRU
Betonblock® and Wotmix are proud to announce the introduction of CDT® (Concrete Drive Thru) to the market. Having installed the first concrete drive thru in the UK at Wotmix plant towards the end of last year in 2023, we’ve witnessed a remarkable uptake with an average of 20 customers collecting concrete from the drive thru daily. This innovative solution has streamlined operations and elevated convenience for Wotmix customers, marking a significant milestone in the evolution of concrete procurement.
CDT® has also expanded its reach, with installations in Oxfordshire, Tennessee, US and recently installed a fourth Concrete
Drive Thru in Scotland. Additionally, CDT® has installed an Aggregate Drive-Thru at Wotmix plant in Hyde, UK, enabling customers to self-collect aggregate in 1-3 minutes.
The Concrete Drive Thru is an innovative machine that combines a user-friendly self-service kiosk with a high-capacity automatic dispenser, allowing customers to self-collect concrete in just minutes. Its modular system allows for easy configuration, tailored to your specific requirements and local conditions. As concrete industry experts, CDT® delivers exceptional support from installation to assistance, ensuring a seamless experience for both you and your customers.
Empowering customers to select the exact amount of concrete they need, starting from 0.2m³, our self-service solution streamlines operations. Customers simply drive their vehicle under the discharge belt and use the intuitive touch screen kiosk to browse your selection of concrete types and choose the exact quantity they need. After payment, a QR code is generated and scanned by the dispenser controller. The system accurately dispenses the chosen materials, and in 1-3 minutes, fresh concrete is ready for transport. Safety remains paramount, with our system fully integrated into a UL-certified and tested safety concept.
The Concrete DriveThru: Fast & Easy
Collect concrete in just minutes
Small quantities from 0.25m3 upwards
User-friendly self-service kiosk
Convenient and fast ordering process for regular customers with RFID chip
Fast setup
Flexible design of range and prices
WASTE MANAGEMENT RETAINING WALLS
In waste management precast concrete walls are fundamental for waste material storage whether the requirement is for permanent or movable walls. If you are upgrading existing facilities or designing new ones to store a range of materials our units are designed for purpose and easy installation with minimal operational maintenance.
Nationwide Precast Concrete (NPC) solely focuses on designing and manufacturing concrete retaining wall systems unlike other manufacturers in the precast concrete sector. With over 25 years of industry experience, we pride ourselves on our strict quality control,
manufacturing to industry standards with extensive knowledge of the waste sector.
Our product line of precast retaining wall systems are tailored to the demanding needs of bulk waste storage. To select the most efficient and cost-effective options consider the specifics of your site.
If you have existing steel framed buildings or a requirement for a permanent external storage structure our prestressed concrete panels (PSTORE) are an effective and economical solution. They come in a variety of thicknesses and lengths that can be tailored to your height requirements.
Our L-shaped retaining walls (LSTORE) are a suitable alternative to PSTORE
units. The units can be secured to existing concrete floors or cast-in to new floors.
We also manufacture an ‘A’ shaped unit (ASTORE) which can be used as a modular moveable system in a variety of heights up to 6m.
Should you need permanent/semipermanent or movable walls NPC has a range of systems which meet Environment Agency requirements.
Unsure what’s best for your project? Reach out – our team is here to guide you to the most cost-effective choices. We also offer full design and installation services for our retaining walls. Contact our team for more information.
RETAINING WALLS
NPC produce a full range of precast concrete walls for dividing waste and recycled products .
Permanent/Semi permanent storage units.
Horizontal panels for use in buildings/ steel upright.
CONCRETE WASHOUT BEST PRACTICE
WHY should concrete washout procedures be implemented onsite?
• To comply with regulations
• To minimise waste and environmental impact
• To prevent contamination/pollution
• To promote responsible waste management
Wash water arising from the washing of equipment that has come into contact with concrete must be collected and, if possible, treated to enable recycling/ re-use within the wash down area or concrete batching process or safely disposed of.
Wash water (even when treated) must not be used for wheel washes or dust suppression purposes.
WHAT harm is caused by not having proper Concrete Washout procedures in place?
Concrete wash water is highly Alkaline making it hazardous to the skin and a pollutant to ground water and water courses.
Untreated liquid should not be disposed of onsite. If on site disposal is necessary, you will require authorisation from your environmental regulator.
You should put in place measures to control, store (and treat) concrete wash water and waste arising from concrete processes on site.
How to implement Concrete Washout Best Practice
Plan your works
Only order the amount of concrete or grout that you need.
Have a designated wash area
Concrete Mixers, Volumetrics, Pumps and concrete equipment must be washed out in a contained area, this area should be sited away from any watercourses or drainage channels to prevent accidental escapes of liquid or slurries to the water environment.
Prepare
Include information on treating the water to reduce its alkalinity, testing the water prior to disposal, and how the water will be disposed of in method statements and risk assessments. Organise and provide training, equipment and PPE where required.
Clear signage and labelling. Ensure your washout area has clear signage and any containers are correctly labelled to distinguish them from other waste or material storage areas.
Capture and treat Concrete Washout
Hire or purchase purpose made equipment to safely capture and treat concrete washout. Suitable equipment will consist of a method to separate solids from the washwater and neutralise the pH of the water.
Monitor Compliance
Implement a monitoring and compliance procedure to ensure concrete washout best practices are adhered to.
Who to hire/purchase Concrete Washout Equipment from?
Kelly Tanks provides compliant and conscientious solutions for treating waste water and concrete wash water on site. Their range is diverse, accommodating sites various requirements to include options for power or no power, closed loop or continuous discharge, single or double systems, automatic or manual pH control, liquid or CO2 dosing for pH control.
INTRODUCING RECYCLING EXPO 2024 IN ASSOCIATION WITH THE RECYCLING ASSOCIATION!
London | 15-16 October 2024
Designed by the industry, for the industry, Recycling Expo has been launched to fill the gap in the market for a purely recycling focused exhibition that enables investment into the future of recycling, remanufacturing and environmental innovation. With a seminar agenda formulated in collaboration with The Recycling Association Chief Executive, Paul Sanderson, and over 150 exciting exhibitors from across the sector, visitors can expect a highly comprehensive and educational B2B event.
Recycling Expo 2024 is the premier destination for private sector, public sector, recycling operators and waste generating companies to source and purchase the latest in ‘green’ waste management products, keep up to date with current and future trends, and network with likeminded peers from across the world of recycling and waste reduction.
“Recycling Expo is more than just an event” says Event Director, Eddy Lawrance. “It’s a marketplace dedicated to connecting industry providers with buyers and creating business relationships centred around responsible resource management, an increase in the reuse of materials, a reduction of consumption based Co2 production, and a shift away from wasteful linear economy models.”
From plastic, paper and wood to electronics and other hard to recycle items, the show will feature exhibitors from across the complex world of waste management, offering insights and education into every aspect of the sector. Plus, all seminar and panel sessions are fully CPD accredited.
2024 Speakers Include:
• Biffa
• Veolia
• RECOUP
• Thalia Waste Management
• British Plastics Federation
• NAWDO
Tackling Waste & Recycling in the Capital
Recycling Expo stands as the only recycling exhibition and conference to take place in London, presenting the industry with a direct opportunity to address and overcome the challenges faced by recycling and waste management companies within our densely populated capital.
Contamination of recyclables, infrastructure limitations and even the carbon emissions being produced by fleets are all issues facing waste collectors and processors across the London boroughs, and as such, are all topics that will be tackled at this year’s event.
Recycling Expo is just 8 weeks away and is going to be an unmissable event! Mark the 15-16 October in your calendar, register for your free tickets, and we look forward to seeing you at the ExCeL London.
VEOLIA’S INNOVATIVE NEW ROCKDUST WILL ABSORB CARBON DIOXIDE AND BOOST SOIL HEALTH
Global resource management company, Veolia, is launching a new natural rock dust product that will boost soil health and help counter climate change by capturing inorganic carbon dioxide. The new product, called ProGrow Rockdust, has been selected to meet the diverse needs of every grower from the window box and patio tub gardener, to allotment holders and community gardeners and schools, to commercial growers, local authorities and landscape gardeners, and provides an organically approved way to increase healthy plant growth, and accelerate natural composting processes.
The new product comes from a little used by-product of the quarrying industry and is based on basic silicate rocks that have been scientifically shown to capture up to 25 percent of their weight in carbon dioxide when integrated with soil and compost. With an overall carbon footprint of significantly less carbon than other fertiliser and soil improver products, it is currently the only one to permanently capture the carbon. It does this by using the enhanced rock weathering process that takes carbon from the unstable biological cycle, and moves this into the stable geological cycle, a process which has been verified by Newcastle University who review the independent scientific analysis of Pro-Grow’s supplies on a regular basis.
Users to date have found that the Rockdust improves soil health and organic growing, as it contains all of the recognised macro and micro minerals and trace elements required for healthy soil. This also boosts the life in the soil, from bacteria to worms and supports the Nitrogen fixing bacteria that also capture organic carbon as they grow.
As it does not require the energy and carbon intensive processes needed to produce nitrogen, phosphorus and potassium (NPK) based plant foods, the new Rockdust product will help growers by providing a natural solution for improving their soil. The resultant healthier plant growth, by using the rock dust, has also reduced the need for pesticides and herbicides according to reports from leading gardeners. Both the Soil Association and Organic Farmers and Growers have approved the ProGrow Rockdust for use on their certified growing systems.
Launched at the UK Horticulture Four Oaks Trade Show on September 3-4th , the Pro-Grow Rockdust product will be available in a range of sizes including 500g tubes for window boxes and patio growers, to 10kg bags for gardeners, and 0.5 tonne and 1 tonne bulk bags for professional growers.
This innovation illustrates Veolia’s ability to maintain its decarbonization trajectory. In fact, a few months after the launch of its new strategic GreenUp program, which plans to accelerate its decarbonization trajectory, Veolia has taken a significant new step in its climate strategy by obtaining the validation of its objectives by the Science Based Targets initiatives (SBTi), the international reference in this field. The SBTi notably praised the Group’s net-zero ambition, recognized as the most ambitious among those it tracks. Furthermore, the international rating agency Moody’s also analysed and recognized the quality of Veolia’s transition plan, awarding the company an overall score of NZ-2 (on a scale of NZ-1 to NZ-5), and praising the ambition and solidity of its short-term implementation. This is based in particular on the use of proven technologies by the Group as Veolia’s ProGrow Rockdust product.
By harnessing the enhanced rock weathering process Veolia’s ProGrow Rockdust product will help capture climate damaging carbon dioxide
ProGrow Rockdust supports soil health by adding key minerals and trace elements which encourage healthy plant growth to regenerate resources as set out in the GreenUp plan.
Launched in September, ProGrow Rockdust meets the needs of all growers from the window box and patio tub gardeners, to allotment holders and community gardeners and schools, commercial growers, local authorities and landscape gardeners.
At the heart of Veolia’s performance model, decarbonization is a powerful driver and a source of value creation for the Group and its clients in the long term. Veolia thus becomes the first company to obtain double validation of its climate commitments by two leading international organisations.
Donald Macphail, Chief Operating Officer – Treatment, at Veolia commented: “Thanks to Veolia’s innovative strength and in line with the objectives of the GreenUp Plan, Veolia’s launch of Pro-Grow Rockdust provides an ideal opportunity for gardeners and horticulturists to improve their soil health through the use of this natural material that boosts biological processes. Not only will it encourage healthier plant growth but it will enable all gardeners to accelerate the decarbonisation of their practices and to contribute to countering climate change by removing carbon dioxide.
“This is another example of how Veolia is taking action, with its GreenUp plan, to regenerate resources and accelerate the decarbonization in order to achieve ecological transformation at every scale.”
FOR FURTHER INFORMATION
To learn more about Veolia, please visit: www.veolia.co.uk
LIMITED FREE TICKETS AVAILABLE FOR THE UK’S LARGEST RESOURCE & RECYCLING EXPO!
The countdown to the Resource & Waste Management Expo (RWM Expo) is on!
As the UK’s largest gathering of resource, waste management, and recycling professionals, RWM Expo is set to take place on 11-12 September 2024 at the NEC, Birmingham.
The show offers an incredible opportunity for professionals across the entire resource spectrum to connect with the industry’s biggest players, learn from the sector’s brightest minds, and drive positive environmental change via discourse on sustainable resource management.
The event is free to attend for the first 20,000 registrants, so secure your free place at the forefront of environmental innovation, solutions, and knowledge exchange while you still can!
Secure your free ticket here: hubs.la/Q02CMDHn0
What is RWM Expo?
RWM Expo is at the forefront of resource, waste management and recycling, addressing critical issues such as resource scarcity, plastic pollution, and sustainable materials use. Attendees can expect to discover innovative solutions and technologies that promote recycling, waste reduction, and the circular economy, ensuring both ecological balance and long-term economic growth in the resource sector. Expect to see cutting-edge solutions from leading waste management suppliers, including waste service providers & operators, plant & machinery, sorting technologies, waste collections & transport, recyclers & reprocessors, material handling, skips & bins, and professional services & consultants.
RWM is spread across three halls, and includes a massive 10,000m2 outside area featuring spectacular displays of industry-leading machinery, live demonstrations of waste-processing equipment, refuse collection vehicles and street sweepers. The outdoor section of the show is the place to see apparatus working in its intended environment, as well as a perfect area to relax and enjoy food, drink, and hear live music in the sunshine at the Inn on the Green!
RWM Expo is part of the broader Environmental Services & Solutions Expo (ESS Expo). This ultimate environmental event combines multiple specialised shows into a single, comprehensive platform under one roof, addressing key areas such as waste management, recycling, energy from waste, decarbonisation, water resource management, contamination, land development, and air quality control, together forming the UK’s largest environmental event with over 12,000 visitors. This unique format allows attendees to seamlessly explore a wide array of sectors and industries, all focused on addressing the most pressing environmental challenges of our time.
With free entry and access to all co-located shows through a single ticket, the RWM Expo provides an unparalleled opportunity for networking, learning, and collaboration across the entire environmental spectrum.
The five shows that make up ESS Expo are:
1. Resource & Waste Management (RWM) Expo
2. Energy, Fuels & Decarbonisation (EFD) Expo – dedicated to sustainable energy generation, energy from waste, bioenergy, alternative fuels, energy management, and decarbonisation. It covers a broad spectrum of topics, including carbon capture, hydrogen technologies, and clean energy systems.
3. Water Resource Management (WRM) Expo – focusing on water scarcity, flood and drought cycles, wastewater management, and water quality issues, WRM dives into wastewater treatment, point source treatment, and sustainable practices to ensure safe and accessible water resources.
4. Contamination & Land Remediation (CLR) Expo – CLR addresses the remediation of contaminated sites, soils & materials, brownfield regeneration & greenfield development, geotechnical engineering & technologies, biodiversity & natural capital, and the management of hazardous substances.
5. Air Pollution Control (APC) Expo –focusing on air quality management, emission reduction, stack monitoring, noise prevention, dust and odour control.
RWM & ESS attracts over 12,000 international visitors, uniting industry pioneers, visionary entrepreneurs, and eco-driven professionals to collaborate, learn, and inspire one another towards a greener future.
From Government, to Europe’s largest environmental services contractors, to big brands, RWM welcomes industry leaders from up and down the supply chain.
Whether you are a business planning your net-zero strategy, a council looking to hear the latest regulatory updates or an equipment manufacturer launching a new piece of equipment, this is your platform to collaborate, network and learn with the people shaping the future of the resource sector.
Numbers That Speak For Themselves
12,000+ attendees
86% hold buying power
6,000+ companies
64 countries
26,000+ leads generated
17,000+ meetings
What’s on?
Expert-led Conference Programme
RWM Expo features an expert-led conference programme that includes interactive speaker presentations, lively panel discussions, workshops, and Q&A sessions. Attendees will have the chance to learn from industry leaders and gain insights into the latest trends and innovations across the entire resource & recycling spectrum.
Current headliners include Chris Packham MBE (one of the UK’s leading wildlife presenters and conservationists) and Mike Gunton, an icon of wildlife broadcasting as BBC Studios’ Creative Director and executive producer of record-breaking series, Planet Earth III.
The first 50 speakers have been announced, including the likes of Sony, EY, Biffa, Virgin Media O2, and the Environmental Services Association to name a few. More huge names will be revealed soon (think global brands and Government officials).
RWM & ESS Expo boasts 17 Stages, 350 speakers, live bands, DJs, live demos and a whole lot more. Discover a diverse array of stages and themes at the show, each designed to bring you the latest insights and innovations across the environmental sector. From high-level government discussions and cutting-edge technical sessions to interactive presentations and vibrant entertainment, the stages offer something for everyone. Attendees will benefit from a unique blend of learning, networking, and fun as they tackle the industry’s most pressing issues.
The stages range from the Net Zero Summit Theatre, which acts as the foundation for high-level discussions on environmental policies, strategies, and innovations, to the Green Skills & Future Talent Hub, which aims to nurture and develop the next wave of environmental professionals, to sector-specific technical theatres, and the ESS Live Stage, the heart of the event’s entertainment, featuring live bands and DJs.
Networking Opportunities
Networking is the cornerstone of RWM Expo, with no shortage of options over the two days. With numerous opportunities to connect with peers, suppliers, and potential clients, attendees can engage in private meetings, AGMs, tutorials, member networking events, industry-specific forums, award presentations, breakfast briefings, and socials around the central bar, Inn on the Green, and ESS Live Stage. This is a prime chance for environmental leaders to build strong, lasting relationships and expand professional networks
Live Demonstrations & Workshops
The expo offers live demonstrations of vehicles, equipment, and machinery, providing a hands-on experience with the latest technologies working in their intended environments. Workshops and talks will cover a range of topics, offering practical insights and solutions for everyday challenges in the environmental sector
Award Schemes & Initiatives
RWM Expo proudly features a variety of award schemes and initiatives that celebrate the achievements and contributions of outstanding individuals and organisations within the environmental sector.
Women in Resource & Sustainability
Taking place on the morning of day two, this inclusive networking platform is dedicated to celebrating and exploring the contributions of women in the resource, recycling, and waste management sectors. It offers a fantastic opportunity for professionals within the industry to share experiences, challenges, and success stories, fostering a supportive community and encouraging greater inclusion and diversity in the sector.
35 Under 35 Awards
This programme identifies the trailblazers in the environmental sector who are striving for professional excellence, promoting industry innovation, and giving back to their company or community. This programme invites individuals from waste and recycling, water management, energy, construction, and anyone connected to managing sustainability within their organisation to join an exclusive group of professionals under the age of 35.
The Environment 100 Recognition Scheme
Recognising our environmental leaders and sustainability champions, The Environment 100 shines a light on the trailblazers and visionaries driving forward environmental sustainability in the UK.
Why Attend?
There’s so many reasons to come and check out RWM Expo – here’s just a few of them:
Free to Visit
The first 20,000 tickets are free, making it an accessible event for all professionals interested in environmental services and solutions. Get yours while you still can: https://hubs.la/Q02CMDHn0
Meet Influential Brands and Suppliers
RWM hosts the most influential brands and world-class suppliers in the environmental sector, providing a platform to discover new products and services from its 550+ exhibitors.
Comprehensive Visitor Experience
As part of five shows in one, attendees get to explore the full environmental spectrum under one roof, gaining access to a wealth of knowledge and innovations. One free ticket gets you access to all five shows, as well as the outside areas, which you can freely walk between.
Thought Leadership
Be part of the discussion and discover environmental solutions that contribute to a more sustainable future. Learn from experts in the field and find out new policies, emerging trends, practices and leave with practical insights and methods that benefit your own operation.
Unrivalled Networking
From structured networking events to informal meet-ups, RWM offers numerous ways to connect and collaborate with industry peers and form professional connections. Check them all out on the website!
Register Now for Your Free Ticket
Don’t miss out on this incredible opportunity to be part of the beating heart of environmental excellence. With limited free tickets available, now is the time to secure your spot. Register via the website today and join us at the NEC, Birmingham, on 11-12 September 2024, for the UK’s largest environmental gathering. Be part of the conversation, explore the latest innovations, and connect with industry leaders.
#RWM24 #ESS24
For more information and to register, visit the website and follow their social media channels for the latest updates and announcements: hubs.la/Q02CMDHn0
2 0 2 4
Ceremony & Networking Dinner
25 SEPTEMBER, 2024
The RECOUP Awards recognise and celebrate excellence in plastics resource efficiency and recycling, and organisations leading a more circular plastics value chain. Join us on 25 September for an evening of celebration, recognition, and networking Check out the shortlisted entries on our website!
We look forward to celebrating with you!
Are you interested in learning more about the latest developments in plastics recycling and resource efficiency? Then don't miss The RECOUP Conference on 26 September 2024 at the Kingsgate Conference Centre in Peterborough!
Sponsored by Berry Global, WRAP, ReZorce® Zotefoams, and others, The RECOUP Conference attracts hundreds of delegates from the entire plastics and wider sustainability value chain With a diverse line up of keynote speakers, networking opportunities, and exhibition spaces, The RECOUP Conference offers the opportunity to hear about the latest updates from the plastics value chain, build meaningful connections, share best practice and stay ahead of our everchanging landscape
Book your ticket at recoup org
SESSION ONE: Understanding the Big Picture –Challenges and Opportunities
SESSION TWO: Inside the Plastic Debate – Rethinking the 4 R’s
SESSION THREE: The Future is Now
With hundreds of delegates in attendance The RECOUP Conference is unique in its ability to draw together the most influential people in the resources and sustainability sector, including NGOs, Local and National Government bodies, and companies from all stages of the plastics value chain to network, share best practice and stay ahead of our everchanging landscape
Don’t miss the event of the year!
