WinSheet - Fall 2008

F.W. WEBB COMPANY

The Webb Industrial News is a Quarterly Catalogue of F.W. Webb Company

IN THIS ISSUE: Mechanical Contractors Program ....................... 2 Pipe & Tubing ................. 3 Valves .........................4-8 Hose ............................. 9 Specialty Process Piping & Hose Solutions .......10-12 Fire Protection ............... 13 Pump Sales/ Service/Repair ............ 14 Victor .......................... 15 Kentrol Process Controls .. 16 Safety Certified Pressure Relief Valve Service ....... 17 Industrial Plastic Piping Products..................18-19 Webb Bio-Pharm: Specialists in BioProcessing Components ................ 20 HVAC/R & Controls ...21-23 Refrigeration ................. 24 Plumbing for Residential and Institutional/Property Management ............... 25 Heaing Parts and Equipment ................... 26 Industrial Specialties ...27-28 Tools .......................29-30 Binghamton Open House ............... 30 Vendor Managed Inventory ..................... 31

Sheet

WINTER FALL 2008 2007

Introducing F.W. Webb’s

1st ANNUAL

Fall LINE CARD Edition

MECHANICAL CONTRACTORS PROGRAM Make F.W. WEBB COMPANY your SINGLE SOURCE for: Pipe • Valves • Fittings • Plumbing • HVAC/R • Fire Protection • BioPharm

ONE CALL • one contact one delivery • one invoice Assign an F.W. Webb Project Manager to your next job! The project manager will coordinate the Webb Team from job start to finish.

Our commitment to you—from bid to completion. . . minimize your costs and increase your profitability!

GET PIPE! CALL 888.438.7473 No one delivers more products to job sites than F.W. Webb Company!

• Dedicated Project Manager

• Product Application Specialists

• 1500 Customer Service Representatives

• 24/7 - 365 days/year

• Over 400 Delivery Trucks

• Sourcing: Hard-to-Find Products

• $120,000,000 Inventory

• Professional Submittals

• 71 Branches

• Job Usage Reports

• WebbConnect Online Access (www.fwwebb.com) • Expediting • On time, Accurate, Complete Deliveries • More Products and Services. . . less hassle.

IT’S F.W. WEBB – BAR NONE!

F.W. WEBB COMPANY

www.fwwebb.com

Webb Has All Different Types of Pipe/Tubing 1/8” to 120” and Larger!

• Carbon • Stainless

• Aluminum • Copper

Pipe & Tubing

• Cast Iron • Brass

• Plastic • Fiberglass/Epoxy

 Stainless Steel Pipe

 Steel Pipe & Fabrication

304/L & 316/L Stainless, Schedules 5, 10, 40, 80

Wheatland • US Steel • Sharon Tube

• 1” – 36” • Flange, bell, roll groove and configurations • Stock sizes in 20’ lengths • Special lengths available

F.W. Webb Company has the largest pipe inventory in the Northeast.

Our fabrication shop is capable of cutting, threading, and grooving through 12” pipe. When you call F.W. Webb, a professional inside sales force will handle your orders and questions. We can fabricate for immediate delivery and have 1/8” – 24” pipe in stock.

Continuous Production • 2”– 8” in schedules 5, 10, 20, and 40, Lengths up to 60’

Batch Production • 10”– 60” in schedules 5, 10, 20, 40, and 80, lengths up to 48’

All Sizes and Schedules 1/8” − 24” In Stock

 Soil Pipe

 CERRO Copper

Our Pipe Depot Stocks...

Copper Tubing/Coils / Carbon Steel Pipe

• Domestic A53 CW, ½” – 4” Sch n end, 1/8” – 4” in black T&C, ½” – 4” in Galvanized T&C ½” – 4” in Sch 80 in black plain end, 2½” – 4” in Sch 40 groove x groove • Domestic A53 ERW, 2½” – 30” Sch 40 & standard sizes • Domestic A53 ERW, 8” – 16” in light weight ranges • Domestic A53 ERW, 6” & 8” XH black plain end • Domestic A106 Seamless, ½” – 2” in Sch 40 & 80 • Imported A106 Seamless, ½” – 12” Sch 40 & 80

Stainless Steel • Domestic 2”– 12” Sch 10 304L – A312, 316L – A312, 304L – A778 (3”), 316L – A778 (3”, 10”, 12”) • Victaulic Sch 5 for Pressfit

Tubing/Coils

Cast Iron Soil Pipe & Fittings

Lengths & Coils Webb has inventory of over onehalf million lbs. of copper tubing from ¼” to 6” in diameter.

PVF • Plumbing • Sprinkler • HVAC • 100 customer service persons • 200 delivery trucks • Dedicated account manager • $90,000,000 inventory • Product application specialists • 24-7-365 • Hard to find products • Professional submittals • 65+ branches

• Job usage reports • WebbConnect, On-Line access (www.fwwebb.com) • Expediting • On time . . . Accurate . . .

Complete Deliveries • More products & services less hassle • Project pricing

PVC/CPVC – HARVEL

Fall 2008

F.W. WEBB COMPANY

100% American Made

Ball Valves  ANSI class 150 flanged

 Apollo-press™

top entry ball valve

Choose the Forged Brass Valve from Apollo® that Installs − Securely − in Seconds

Critical Service Valves • Sizes 1/2” to 10” • Temperature – 150°F to +2,000° F • ANSI Pressure Class 150, 300, 600 • Vacuum to 29” Hg • 16 seating materials, four different configurations • High-strength encapsulated metal seat holders Ideal for High Temperature, High Vacuum • Seven body materials and Intense In-Line Repair Demand • Nine ball and stem materials • Six end configurations 1/2” – 10” • Standard bonnets, extended bonnets and fugitive emission bonnets – all interchangeable • B16.34 Compliant

 Apollo® flanged Ball valves

High Performance Flanged Valves 87A/88A Series

Apollo flanged ball valves are available in CF8M Stainless Steel, WCB Carbon Steel and CN7M A20 alloy.

A351 CF8M – 87A Series A216 WCB – 88A Series 1/2” – 12” A351 CN7M – 87A-400 Series

– 87A-500 Series Apollo flanged valves are available in 150# flanged and 300# flanged floating designs. Are also available in standard as well as full-port configurations.

Flange Rating

Standard Port

Full Port

Carbon Steel

150#, 300#

88A-100, 88A-700

88A-200, 88A-900

Stainless Steel

150#, 300#

87A-100, 87A-700

87A-200, 87A-900

150#

87A-400

87A-500

Alloy 20

Also available with trim options: • 316SS ball and stem • NiCu ball and stem • Hastelloy ball and stem

87A, 88A Extended Bonnet Works Best In Insulated Applications

NEW 4” Extended Bonnet

Unique Apollo® 4” stationary bonnet extensions are your perfect choice for valves in insulated service. Better than a stem extension, this gasketed, pressure-containing bonnet bolts directly to the ISO 5211 mounting pad. Because the extension is stationary, the valve can operate as designed — without tearing away insulation.

The packing is moved above the insulation for ease of maintenance. A four-point ISO 5211 mounting pad is also included as the standard locking feature. Available factoryinstalled or in kit form for retrofitting.

• B16.34 Compliant

F.W. WEBB COMPANY

Features: • Compatible with most crimping tool systems • 210°F maximum operating temperature • Press connections rating: 200 psig • Valve rating: 600 psig CWP • Forged brass construction • Adjustable stem packing • For water or air service • Blow-out proof stem • Full port design • Sizes ½” – 2”

77W

1/2” – 2” Apollo Series 77W Apollo-Press ball valves feature end connections forged as an integral part of the valve body. You get a solid joint between pipe and valve in just seconds with no additional fittings, no solder, no flame.

The 77W features a blowout-proof stem, chrome plated solid brass ball for optimal flow and an adjustable stem picking nut.

Apollo-Press™ valves meet MSS SP-110 standards. They are UL-listed, FM certified and ANSI/NSF 61 approved.

Apollo-Press valves are available now in sizes from ½” to 2”. ™

Integral Crimp-Ready End Connections Offer Savings You Can Count On.

 Apollo® Class 600 Ball Valves 83B Carbon Steel and 86B Stainless Steel Fully rated in every size: 3/8”, ½”, ¾”,1”,1¼”, 1½”, and 2”.

Also available in nickel and alloy bodies.

Gland plate adjustable without removing actuator.

• • • • • • • • • • • •

Three-piece full port enclosed stainless steel bolts Swing-out center section Pressure-balanced solid ball Anti-blowout bottom entry stem design Anti-static ground ball and stem Lockable in open or closed position Fully machined ISO 5211 mounting Cast bosses for bleed and drain ports Vacuum service to 29 in of Hg Meets NACE MR0175 (2000 edition) Steam rated to 250 SWP Adjustable multi piece “V” style packing • Unfilled FDA compliant, enhanced PTFE seats are standard • B16.34 Compliant

3/8” – 2”

www.fwwebb.com

ITT Engineered Valves Delivering high quality, innovative flow control solutions for Abrasive Wear Resistance, Corrosion Resistance, and Critical/Hazardous Containment in a wide range of industries worldwide.

ITT introduces Fabri-Valve® SV1 Slurry Valve with new Guillotine GateTM design to provide longer life and lower maintenance.

Mining and mineral processing plant operators can choose a longer lasting, lower maintenance valve for controlling heavy slurries, as ITT introduced a valve design that incorporates the unique patent-pending Guillotine GateTM. Unlike traditional knife gate valves, the Fabri-Valve SV1 push-through slurry valve features a gate design that slices through high density slurry at an angle. The gate slices cleanly through tough slurries and prevents the seat from cutting and tearing, while also reducing the amount of discharge from the valve.

In service at a manufacturer of phosphoric acid – a demanding application where valves must cut through heavy scaling and withstand abrasive acid washes – the SV1 demonstrated far superior durability compared to competing knife gate valves.

Three key features combine to make the SV1 more durable, with less maintenance than competitive push-through slurry valves. Along with slicing through slurries more efficiently, these features prevent seat damage, which is a common issue with many push-through slurry valves.

1. Guillotine Gate. The angled-cut guillotine gate design slices through media the way that an angled knife would cleanly slice through a tomato, rather than simply pushing through and squishing the seats as a dull, flat knife would do to a tomato.

2. Gate support liner. The slick plastic Ultra-High Molecular Weight (UHMW) Polyethylene gate support liners within the SV1 guide the gate through the entire stroke, shielding the body of the valve from direct contact with the media, while reducing downstream gate deflection and preventing the gate from cutting the seat.

Seat protection is key in reducing downtime on slurry valves. Seat damage is a common issue with many pushthrough slurry valves, leading to a seat replacement or whole valve replacement to fix the problem.

3. Seat. The proprietary engineered polymer seats reduce friction and also increase seat life, particularly in high solid slurries. The Fabri-Valve SV1’s resilient material requires no lubrication, which saves tremendously Fall 2008

on maintenance costs. Even valves that claim to selflubricate, as opposed to those that need to be manually lubricated, can create maintenance troubles because lubrication can trap particles, and gritty lubrication can eventually affect valve operation.

The SV1 is designed for easy installation and maintenance.

The gate can be completely removed and replaced while the valve is under pressure, actuation can be changed in the field, and valves with manual operators or double acting air cylinders have self-supporting yokes providing valve orientation flexibility.

Fabri-Valve Product Manager Grant Harlow explained that ITT designed the SV1 specifically to meet the needs of mine operators who process heavy slurries and deal with high maintenance costs and downtime concerns of their slurry valves. “Our goal with the SV1 was to make a valve that basically takes care of itself. SV1 lowers the time and money spent on maintenance, and allows mine operators to focus on production without worrying about valve failure,” Harlow said. “Along with improving uptime, we also have made maintenance and replacement easy when the need arises.”

The SV1 is available in sizes ranging from 3” through 24” diameters (DN80 – DN600). All sizes can operate at 150 psi (pounds per square inch) of working pressure, and up to 170°F (77°C).

The SV1 is designed with positive bi-directional shutoff that allows zero downstream leakage, and the shutoff performance is not affected by low pressure. Other standard features include dead end service capability, mechanical lock-out in the open or closed position, and discharge equal or less than competitors. Fabri-Valve SV1’s are competitively priced, and are available from authorized ITT Fabri-Valve distributors.

To learn more or to obtain technical specifications, please call your F.W. Webb representative.

Fabri-Valve® is a registered brand of ITT Corporation.

F.W. WEBB COMPANY

Valves

ER. D L O S D L U O C “I I cOULD ALsO

ORK.” W O T E s R O H RiDE A The Global Leader in Press Technology Has Gone Stainless

To avoid the AFTER WHAT – switch to Flexitallic.

Gasket failures can lead to system downtime and

New for 2008, Viega releases a stainless steel press fitting system complete with fittings, valves and pipe. Ideal for applications where optimum corrosion protection is required, the ProPress® Stainless line offer installers an alternative to welded and threaded pipe connections. Available in a wide variety of configurations and sizes from ½” to 4”, ProPress Stainless fittings hold the patented Smart Connect Feature™, a quick and easy way for installers to identify unpressed connections.

serious environmental impact. As the industry leader, Flexitallic Spiral Wound Gaskets are consistently manufactured to exacting engineering standards.

They’ll stand up to the toughest temperature and pressure conditions, they’re resistant to virtually all corrosive and toxic media, and you get the same high quality gasket on time, every time.

Gasket specifications should be reviewed and updated every 2 years. Call F.W. Webb today for a gasket consultation to make sure you are specifying the most reliable gaskets.

WARRANTY: Viega LLC makes available the option of an additional warranty covering reimbursement for consequential damages for the first five years after installation. Contact your F.W. Webb salesperson for more details!

F.W. WEBB COMPANY

www.fwwebb.com

Valves Crane and F.W.Webb Company provide valves that have stood the test of time.

Whether it’s Bronze Valves, Iron Valves, Cast Steel, or Butterfly Valves, you can rely on the most experienced team in the Northeast to make your valve selection easy.

 Bronze Valves

 Cast Steel Valves

Gate • Globe • Angle • Check

Gate • Globe • Check

• Class 125 – 300 • Flanged, Threaded, & Solder Ends • Screwed & Union Bonnet • MSS-SP-80 • Commercial & Industrial Grade • Rising & Non-Rising Stem • ASTM B61 or B62 Body • Stainless Steel, Bronze, or Teflon Disc • UL/ULC/FM listed valves

• Class 150 – 600 • Sizes 2” – 24” • Flanged and Butt-Weld Ends • Bolted Bonnet • Swing, Tilting Disc and Stop Check • NACE & Special Trims (i.e., 316 SS, Bronze, Monel) • API 600

¼” - 3”

 Stainless steel valves

• Class 150 – 600 • Threaded, Socket-Weld, & Flanged Ends • Bolted & Screwed Bonnets 316 SS, 316L SS & Alloy 20 Material Standard • Special Materials (Hastelloy C, Monel, 304 SS, & more) • API 603, MSS-SP-42

Over 150 years of experience and reliability you can count on at every turn.

 center line

 FLOWSEAL

Resilient Seated Butterfly Valves

High Performance Butterfly Valves

• Rated to 200 & 285 PSI shut-off • Wafer and lug body style • Series 200 Cast or Ductile Iron • Series 225 – 285 PSI shut-off • Series 250 – Carbon or Stainless Steel • Series 300 – Direct Drive • Series 800 fully elastomerlined check • Automated valves: pneumatic, electric, hydraulic Center Line Valves are well-suited for low pressure applications, providing dependable service for air and water in snowmaking pipelines.These valves are easily replaced in the field.

• ASME Class 150, 300 and 600 • Wafer and Lug body style • Soft seated; zero leakage • Metal seated; ASME Class IV leakage • Fire safe; meets API 607, Rev. 4 • MSS-SP-68 • Automated valves: pneumatic, electric, hydraulic • Lug body valves suitable for dead-end service in either direction The patented Flowseal soft-seat design provides bubble-tight shutoff and provides unparalleled service in vacuum- to low-pressure ASME Pressure Classes 150, 300 and 600 applications.

2” - 48”

2” - 48”

2” - 24”

 Duo-Chek® High Performance Check Valves • Class 125 – 2500 • Lug, wafer, double flanged, and extended body style • End connections: Raised face, Plain face, Ring joint, Weld end, Hub end, Flange connections • Resilient and metal seal materials • API-594 • Cast Iron, Ductile Iron, WCB Cast Steel, 316 SS, all alloys Provide superior backflow and water hammer protection for pumps in snowmaking systems.

2” - 72”

Fall 2008

F.W. WEBB COMPANY

Valves

Need a tight shutoff for your system?

Ask DFT for your critical protector!

PDC Check Valve Self Sizing for Air and Gas Compressors • ANSI B16.10 F to F • 1” to 12” Size • ANSI 150 to 1500

ASCO® Redhat next generation revolutionary new power management technology The Asco® RedHat Next Generation revolutionary new power management technology sets new industry standards for reliability and power consumption. The new line of solenoid valves accepts both AC and DC voltages while improving performance. These 2-way, 3-way and 4way solenoid valves are designed to handle most fluid control applications.

• Now available with Class I, Division 2 approvals.

• Increase in DC pressure ratings to AC levels on all products (up to 500% improvement).

• Lower power operation (2-watt solenoid delivers the same performance as a traditional 17-watt AC solenoid).

• Voltage ranging provides standard solutions to special voltage requirements, such as global usage, voltage fluctuations, and specialty applications.

• Built in surge suppression eliminates the need for a separate surge suppression diode.

• Elimination of AC hum.

Please contact your local F.W. Webb representative for more information.

Ask your F.W. Webb Representative for more information.

F.W. WEBB COMPANY

www.fwwebb.com

Specialty Process Piping and Hose Solutions Contact Peter Marshall, Gary Rose or Mike Costa: 800.795.6390

Peter Marshall

The heating oil season is now upon us, and it’s time for fuel dealers to do the periodic maintenance to the fuel delivery equipment to make the upcoming season accident- and trouble-free. Gates Rubbers new completely redesigned fuel oil delivery hose can help. The new design incorporates and extremely abrasion-resistant carboxylated Nitrile cover and an RMA Class A Nitrile tube to make a flexible and durable long lasting cost-effective hose assembly.

F.W. Webb’s Hose Division can make custom hose assemblies specific to the customers’ needs.

TIME to order your FUEL OIL DELIVERY HOSE! & New ed ov Impr

The new, improved fuel oil delivery hose from Gates.

Completely redesigned from the inside out to incorporate the best materials and construction.

Fuel Oil Delivery Hose will stand up to your toughest, roughest service. Whether you’re delivering to homes, businesses, or construction sites, Fuel Oil Delivery is the hose you can depend on for long-lasting, trouble-free service.

TO ORDER, please contact Peter Marshal, Mike Costa, or Gary Rose at 401.463.4108.

Gates is an engineered system of hose and fittings designed to be used together for top performance, and a long, safe, service life.

Fall 2008

F.W. WEBB COMPANY

Pipe Specialty Fittings/Webb Process Piping Piping and Hose Solutions Solutions Gary Rose General Manager Piping Products

Contact Contact Gary Gary Rose, Rose, Mike Mike Costa Costa or Peter Marshall: 800.795.6390 or Peter Marshall: 800.795.6390

Ecte conulla feu feuipsuscing eros autpatis ex exero essis dit wisl euiscil ismodignim er susciduis er il dunt wisl iusciduis euip el dolortisit in henit dolore faciduisim veliqui tetumsandre tate conulla feu facing et accum quatet ad doluptat lutat. Volor ipit ullan henis num zzril ute minissi.

Ore esequate magna accummo doluptat ut lorem ip eugait nosto cortis dolut lam veraessis alis et acilluptate exer sit www.fwwebb.com lum delissed diam iure molorem

LINE CARD

Innovative Process Solutions F.W. Webb Company uses only Resistoflex-lined pipe and fittings and is the only factory-authorized distributor in the Northeast. Our Conrac machine allows us to fabricate custom spool pieces for Resistoflex piping systems up to 8” diameter.

Our factory-trained personnel located at our Cranston, Rhode Island facility are here to serve you with their many years of experience and knowledge of lined piping systems.

F.W. Webb is the exclusive, stocking distributor of Resistoflex. We have the inventory and personnel dedicated to serve you for all lined product requirements.

Piping Systems for: • Compressed air • Inert gases • Vacuum • OEM machines

• Industrial & commercial wash down equipment • Drain valves • Sampling valves • Line blind valves

• • • • •

Plastic–lined products Butterfly valves Ball valves Check valves Strainers

• Quality fluid & gas transfer • Pipe connectors in Stainless Steel and Carbon steel

• Double ferrule CBC lock fittings • Ball valves • Needle valves

• Industrial hose • Acid chemical, air & multipurpose, petroleum transfer, food & beverage, material handling

CRANE RESISTOFLEX and CRANE XOMOX: you’re single source for youR most difficult corrosion applications

•

• • • • •

10

Polypropylene, Teflon, Kynar, and PFA Lined products Diaphragm valves Check valves Clamp valves Hose Expansion joints

F.W. WEBB COMPANY

• • • • • •

PFA Lined products Swing check valves Ball check valves Piston check valves Sight flow indicators Strainers www.fwwebb.com

Specialty Pipe Fittings/Webb Process Piping and Piping Hose Solutions Solutions Gary Rose General Manager Piping Products

Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

Customers are always looking for cost to essis difficult Ecte conulla feu feuipsuscing eroseffective autpatissolutions ex exero piping andeuiscil hose problems.

F.W. er Webb and theerWebb Piping dit wisl ismodignim susciduis il dunt wislProducts Division areeuip committed to finding customer solutions.

New and iusciduis el dolortisit in henit dolore faciduisim veliqui innovative products like Legris and Lok Ring help customers cut tetumsandre tate conulla feu facing et accum quatet installation time and cost with unique installation protocol. ad doluptat lutat. Volor ipit ullan num zzril ute minissi.

Crane Resistoflex and Xomox offer henis cost-effective alternatives to Ore esequate magna process accummo doluptat utuslorem ip eugait exotic alloys in chemical piping.

Also call for Strahman and Gates Rubber— two names you alis can et trust to handle exer wash sit nosto cortis dolut lam veraessis acilluptate down, hydraulicdiam and industrial hose requirements. lum delissed iure molorem

Crane Resistoflex and Crane Xomox: You’re Single Source for Your Most Difficult Corrosion Applications.

 xomox® tufline fully lined plug valves

• These valves are more versatile, and often out-perform alloy valves.

• More economical than alloy valves.

• With FEP and PFA lining, cast, dovetail recesses and machined grooves lock the lining to the valve body casting. The locked-in lining is virtually impervious to shrinking, stress-cracking, collapse, or blowout.

• Unlike alloy valves, there is no need to inventory different valves for various applications.

• There is less chance of costly and dangerous installation errors.

• Media contamination is prevented.

• Positive shutoff.

• FEP and PFA locked-in lining.

2-way fully lined plug valves 3-way fully lined plug valves

Xomox® valves are lined with DuPont™ Teflon® fluoropolymer.

 xomox® tufline fully lined Ball valves

• Tufline Lined Ball valves have a metal-tometal body joint to control compression of the liner for assured sealing.

• The seats are easily and quickly replaced.

Standard port lined ball valves

Full port lined ball valves

fully lined accessories

Tufline Fully Lined Accessories are a reliable and economical alternative to costly highalloy products.

• Wafer Swing Check Valves • Ball Check Valves • Piston Check Valves • Sight Flow Indicators • Strainers • Tank Bottom Valves • Poppet Check Valves • Clamp Valves

 xomox® tufline fully lined butterfly valves

• Lower torque ratings.

• Continuous disc/shaft lining.

• Triple O-ring stem sealing components are all isolated from corrosive flow media.

• Spring washer live loaded stem packing.

• Slim profile disc.

• Completely enclosed shaft bottom. No springs, seals, or

washers to corrode or fail.

• Face-to-face dimensions meet API 609 specifications.

PFA lining: • More flexible and less bulky for more reliable and tighter sealing.

• Excellent permeation resistance.

• High Cv values.

The Cost–Effective Way to Fight

Crane Resistoflex / Crane Xomox now give F.W. Webb the capability of offering the complete Crane package for corrosion–resistant plastic–lined pipe, fittings, and valves. The economical alternative that combines the mechanical strength of steel with the chemical resistance of an engineered plastic. Why live with the constant maintenance and replacement of inexpensive materials or the outrageous price for alloy piping?

Fall 2008

 xomox® tufline

Corrosion

F.W. Webb Company uses only Resistoflex–lined pipe and fittings and are the only factor y–authorized distributor in the Northeast.

Our Conrac Machine allows us to fabricate custom spool pieces for Resistoflex piping systems up to 8” diameter. Our factor y– trained personnel located at our Cranston, RI facility are here to serve you with years of experience and are knowledgeable in lined piping systems.Webb is the only exclusive authorized stocking distributor with the inventor y and personnel dedicated to serve you for all lined product requirements.

F.W. WEBB COMPANY

11

Specialty Process Piping and Hose Solutions

Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

IN STOCK in CRANSTON and ALBANY!

12

F.W. WEBB COMPANY

www.fwwebb.com

Fire Protection Contact Bob Schuler, Billy Gardner or Roger Claypool: 800.624.6647

Rich Lambert

LINE CARD www.fwwebb.com

Victaulic

Tools

• Firelock Grooved Couplings & Fittings • ULFM Valves • Riser Manifolds • CPVC Plastic Pipe, Spears Flameguard CPVC Fittings • Sprinkler Heads and Devices • Fire-Pac • Pressfit • Dropmaster

• Lenox Hole Saws and Sawzall/Hacksaw Blades • Ridgid • Milwaukee • Triple R Specialty • Victaulic

Steel Pipe • Schedule 40 A53CW – A53 ERW – Al35 • Schedule 10 Al35/A795 1¼” – 8” • Wheatland • Allied Tube and Conduit • US Steel

ULFM Valve Products • • • • •

Nibco ULFM Gates Nibco ULFM Post Indicators Nibco ULFM Checks Test and Drain Valves Ames/Watts Backflow Products

Hangers • • • • •

Erico Tolco Earthquake Bracing Unistrut Sammy Super Screws PHD Ballard Clamps

Electrical Products ❙ • Potter Electric Signal Co. ❙ • General Air Products (Compressors)

Miscellaneous ❙ • ❙ • ❙ • ❙ • ❙ • ❙ • ❙ •

FPPI Products Pipe Joint Compound Antifreeze Firestopping Cutting Oils Teflon Tape Wilkens Valve Products

Fabrication • • • • •

Threading Capabilities through 8” Grooving Capabilities through 24” Welding Bundling Color Coding

Superior Service • Rack trucks with “Piggy Back” fork trucks • Complete Fire Protection Inventories • Fast, Quality Fabrication

F.W. Webb Company 152 Will Drive Canton, MA 02021 TEL: 781-828-5559 800 624-6647 FAX: 781 828-8060

Fall 2008

F.W. WEBB COMPANY

13

Cranston, RI: 866-850-7867 Winslow, ME: 800-452-1928 Syracuse, NY: 866-850-7867

Pump Sales • Service • Repair

Specialists in Fluid Handling

Jim Bodle General Manager

LINE LINE CARD CARD www.webbpump.com

Armstrong

ITT Goulds Texas Turbine Pumps

• Commercial/Industrial Inline Centrifugals, End Suction Centrifugals and Split Case Pumps

• Capacities to 10,000 gpm, heads to 450 feet

Blacoh • Pulsation Dampeners • Surge Suppressors

LMI • Chemical Metering Pumps and Prepackaged Chemical Metering Systems

• Inlet Stabilizers • Accumulators

MP

Cat Pumps

• End Suction Centrifugals, Self Primers and Engine Driven Units • Hydraulic Drive Units • Electric Clutchpacs for Belt Drive Systems • Cast Iron, Bronze, Stainless Steel or Aluminum construction

• High Pressure Positive Displacement Pumps and High Pressure Cleaning Systems

Dean

Oberdorfer

• ANSI Series pH Centrifugal Process • Heavy Duty High Temp. Process • Air-Cooled High Temp. Thermal Liquid Pumps • Air-Cooled Hot Water Pumps

• Rotary Gear • Rubber Impeller

Neptune

Fairbanks Morse

• Helical Rotor • Chemsteel® Series Metallic, Non-Metallic and Mag drive

• Chemical Metering Pumps and Mixers

• End Suction Centrifugals • Submersible Solids Handling • Horizontal Split Case • Dry Pit Solids Handling • Vertical Turbines • Vortex/Chopper Pumps

Gorman-Rupp • Self Priming Centrifugal and Trash Pumps • Submersible Pumps to 20” Discharge/14,000 GPM • End Suction to 12” Discharge • Rotary Gear Pumps to 600 GPM/Viscosities up to 2,000,000 s.s.u.

• Diesel and Gasoline Powered Centrifugals and Self-Primers

Gorman-Rupp OTS/AMT

Pumper Parts® • Quality Replacement Parts for ARO® Yamada® and Wilden® Air Operated Double Diaphragm Pumps • Liquid End and Air End Rebuild Kits

Summit • End Suction, Self Priming, ANSI and Stock Pumps • Direct Replacements for Goulds 3196 and 3175 Models • Replacement Parts for many ANSI and Industrial Pump Models

Versa-Matic • Air-Operated Double Diaphragm Pumps with exclusive ELIMAMATIC® Air Valve System • ELIMA-MATIC® Retro Fit Centers for Wilden® Pumps

• Off-The-Shelf (OTS) readily Available Pump Products Motor-Driven Centrifugals and Gears Engine Driven Pumps Diaphragm Pumps • 24–hour Shipment from Factory Stock

Webster Corrosion Resistant Pumps

Grundfos Commercial/Industrial • Vertical Multistage Centrifugals available in both Stainless Steel and Titanium Construction • E-Series Electronically Controlled Centrifugals • Horizontal Stainless Steel Multistage Self-Primers • Booster Modules in 4”, 6” and 8” Configuration • Digital Diaphragm Dosing Pumps • In-Line Cast Iron Centrifugals

• R Series – Non-Metallic Magnetic Drive • C Series – Non-Metallic Centrifugals • S and D Series – Non-Metallic Vertical Immersibles

Zoeller Engineered Products • Heavy Duty Non-Clog Submersibles • High Temperature Submersibles • Reversing Grinders • Oil Smart® Systems • Hazardous Environment Pumps

ITT Goulds G & L • End Suction Centrifugals • Vertical and Horizontal Multistage • Stainless Steel, Bronze and Cast Iron Construction • Aquavar CPC Variable Frequency Drives • AquaForce Prepackaged Booster Systems

14

F.W. WEBB COMPANY

Service Capabilities • Pump Repairs — In-House and in the Field • 24–Hour Emergency Service • Dynamic Balancing and Laser Alignment • Mechanical Seal Repair • Specialty Coatings — ARC® and Belzona®

Factory Authorized Service Centers • Alfa Laval • Myers Aplex • Zoeller Engineered Products

www.fwwebb.com

LINE LINE CARD CARD

Hartford, CT: 800.243.9360 Clyde, NY: 800.828.8824

LP Gas & Natural Gas Solutions

Pete Dwyer Victor Product Manager

www.victormfg.com

LP Gas • Natural Gas • Oil • Air Conditioning Adams Gas Conversion Burner Al Gas Vaporizers American Standard Cylinder Cabinets Amtrol Tanks Anderson-Forrester Orifices & Tools Apollo Ball Valves Aqua Star / Bosch Tankless Water Heaters Asco A.Y. McDonald Valves and Fittings Bradford White Water Heaters Beckett Condensate Pump Blue Flame Loglighters Broilmaster Gas Grills Paulin LP Accessories Buderus Boilers Burnham Boilers Copper Tubing & Fittings Carlin Gas Conversion Burners Copper Fittings Cozy Gas Heaters Anode Bags Cad Weld Charter Plastic Polyethylene U/G Gas Pipe Corken Pumps, Compressors Craftsman Tools Crane Swing Check Valves Consul Gas Refrigerators Domestic Schedule 40 & 80 Pipe Simpson Duravent Direct Vent Pipe, B-Vent, All Fuel, and Pellet Vent Dormont Flex Connectors Douglas Signs Edmont Gloves Empire Comfort Systems Superb Hot Plates and Grills White Mountain Hearth Enerco Radiant Heaters, Mr. Heater, Patio Heaters, and Gas Lights

Sensus Meters & Regulators Schedule 80 Fittings Fairbanks Beam Scales Fields Vent Systems Flex-Hose Flexible Connectors Quality Steel Tanks Worthington Cylinders Federal Process Sealants Endurance Gas Boilers Hercules Chemical Hannay Reels Honeywell Controls Dayco High Pressure Hose Harper Hand Trucks Hansen Quick Connectors Regulator Hoods Jomar Ball Valves Johnson Controls King Kooker Portable Cookers Kamco Plastic Covered Copper Tubing Krug Compressors Blue Angel Pumps Laars Boilers Lambro Dryer Vent & Pigtails Lazyman Gas Grills L.B. White Construction Heaters Liqua-Tech Meters R.W. Lyall Undergound Plastic Fittings Continental Stab U/G Plastic Fittings Miller / Nordyne Mobile Home Furnaces & Parts Marshall Gas/Brass Schedule 40 Fittings Outdoor Lights, Outdoor Torches, and Grill Parts Modine Unit Heaters and Parts Mars Maxitrol Napoleon Fireplaces and Stoves

Victor 200 Locust Street Hartford, CT 06114 ph: 860.722.2433• fax: 800.274.2004 Fall 2008

Universal (Desa) Temp/ Construction Heaters Black and Galvanized Vent Pipe Schedule 40 & 80 Nipples Peerless Boilers Premier Ranges PurePro® Products / PurePro® Boilers Presto Tap Robertshaw Controls Reznor Heaters Rego Regulators & Valves Ridgid Tools Rinnai Rochester Gauges Superstor / Munchkin Boilers Flared & Hose Barb Fittings Stanley Tools Self-Cleaning Strainers Siemens Generators Skuttle Humidifiers Sunstar Infrared Heaters Storburn Gas Toilets Sumter Coatings Paint & Accessories Teledyne Laars Pool Heaters Turbo Torch Taco Hydronic Equipment Trac-Pipe Flexible Gas Line UEI Test Equipment Galaxy Lights Gas Outlet Boxes Webstone Weil Mclain Boilers White Rodgers Controls Watts Valves Watts WaterPEX York Furnace and Cooling Systems Z-Flex Chimney Liners, SS High Temp Venting

Victor 80 Davis Parkway Clyde, NY 14433 ph: 315.923.7819• fax: 315.923.3794

F.W. WEBB COMPANY

15

800.452.1928 207.873.7741 Your Total Sales and Service Source for Automated Valves, Process Controls, Overpressure Protection Valves, and Engineered Products.

Kentrol Process Controls

800.452.1928 207.873.7741

Daryl Schoellkopf General Manager

LINE CARD www.kentrol.com

Process Control / Control Valves / Instrumentation & Accessories

Accutech Temperature, Pressure, Differential, and Acoustic Transmitters, Analog or Wireless Output

Apollo Threaded and Flanged Ball Valves, Top Entry Ball Valves, Pneumatic and Electric Actuators, Limit Switches and Accessories

Asco Three-Way and Four-Way Solenoid Valves,Valve Monitoring Systems

ITT Engineered Valves Dia Flo – Diaphragm Valves Fabri - Knife Gate Valves Skotch Trifecta – Oil and Gas Burner Shut Off Valves

Kajaani Blade, Shear, and Microwave Consistency; Transmitters, Sample Valves and Web Break Detection Systems

Masoneilan

PID Loop Tuning, Analysis and Simulation Software

Rotary Motion Control Valves (Camflex®, Varimax®, Paramax®); Linear Motion Globe and Angle Control Valves (Cage, Top and Stem Guided, 2-way and 3-way); Process Control and Measurement Instrumentation Smart Technology Digital Valve Positioners and Process Controllers; Engineered and Special Application Control Valve

Fairchild

Ohmart Vega

Ashcroft Diaphragm Seals, Digital Pressure Gauges, Pressure and Temperature Switches, Dead Weight Testers, Calibrators, Transmitters

Expertune

Pneumatic: Transducers (I/P, P/I), Regulators, Booster, Manual Load Stations and Computing Relays

Level Sensing Systems; Including Radar, Ultrasonic, Nuclear

Flowline

Pneumatic, Electro-Pneumatic and Digital Positioners

Tank Inventory Monitoring, Automation and Safety, and Instrumentation

Flowseal High Performance Butterfly Valves, Actuators & Accessories

FST Aquarian Water Level Measurement

Fujikin Corrosion and Wear Resistant Ceramic Control and Ball Valves

Spirax/Sarco

Valve Communication Systems, Limit Switch Packages

Toshiba Electromagnetic Flowmeters ½” – 24”; Sludge Density Transmitters and Programmable Controllers

Tricentric Triple Offset, Metal Seated, Extended Duty Butterfly Valves

ValvTechnologies Severe Service Isolation and Control Valves

Xomox Tufline Plug, Ball & Butterfly Valves

Control Panel Design and Fabrication

• CAD Design • UL Certification • NEMA 12/4/4x & Class 1, Div.1 • Custom Stainless Steel Fabrication • PLC Cabinets • Solenoid Cabinets • Complete Control Rooms • Sampling Systems • Damper Drives • Custom Consoles



Valve Services

• Valve Calibration • Valve Repair and Rebuilding • Valve Diagnostic Surveys • Valve Optimization Software • Predictive Maintenance Software

Engineered Systems

• CAD Designed Skid Mounted Process Systems • Metering Systems • Filtration Systems • Temperature Control Skids/Modules • Utility Boiler Burner Valve Racks • Instrument Racks • Pump Skids

Transmitter Manifolds (2, 3, 5, Valves), Needle Gauge Valves, Airheaders, Differential Pressure Gauges

RCS





Precision

Quarter-Turn, Linear, Spring Return ; Electric Actuators

Instrumentation Services

• Installation and Calibration • PID Loop Tuning • Troubleshooting • System Start-up Support • Commissioning Support • Full Shut-down/Outage Assistance

StoneL

PMV

Promation Engineering



Electric and Pneumatic Globe Control Valves, Flow Meters, Boiler and Level Controls

800.452.1928 207.873.7741

Call Scott, Chad, Cynthia or Parrish with your questions.

Electric Spring Return Fail Safe Actuators, Rotary and Quarter Turn Electric Actuators Scott Varney Chad Collier Cynthia Berkovsky Parrish Lovell sva@fwwebb.com chc@fwwebb.com ceb@fwwebb.com par@fwwebb.com

16

F.W. WEBB COMPANY

www.fwwebb.com

800.452.1928 207.873.7741

Sevco Certified Pressure Relief Valve Service

Daryl Schoellkopf General Manager

LINE CARD sevco.fwwebb.com

Products & Services for the Power Industry

CONBRACO



Temperature, Pressure, Differential, and Acoustic Transmitters, Analog or Wireless Output

Grid • Pressure Relief Valves for Steam and Gas Services • Factory Authorized Assembler for Series 19 Bronze, Series 119 Cast Iron and Series 500 Pressure Relief Valve • Stocking Series 12, 14 and 15 Series Relief Valves for Low Pressure Boiler and Air Systems

Spirax/Sarco • • • •

Cast Iron Heat Transfer Surfaces Horizontal and Vertical Discharge Unit Heaters Blast Coils Air Makeup Units

Crosby •

• •

Pressure Relief Valves for Steam, Gas and Liquid Services; Factory Authorized Assembler Isoflex Secion 1 Safety Valves Style JOS, JBS and JLT Pressure Relief Valves to Handle all Section VIII Requirements

Quietflow • Silencers for Vents, Control Valves and Pressure Relief Valves

Zook • Overpressure Protection Products • Rupture Disks • Explosion Vents

Call Cord or Gary with your questions.

Gary Thibodeau ggt@fwwebb.com

Fall 2008

Cord Collier col@fwwebb.com

Services • Authorized Crosby Valve “Pressure Management Center” • Holder of Certificates of Authorization for the use of “V”, “UV”, and “VR” symbol stamps • Factory trained and certified field and shop technicians • State-of-the-art steam test facility to 1500 psi • Liquid test facility to 3100 psi • Air test facility to 3100 psi • Electronic testing of safety valves, in line and under pressure • Hydraulic Lift Assist devices for testing safety valves in line at reduced pressure • Lapmaster facilities to ensure mirror-finish on valve seats, rotary joints, and custom machining • In-plant valve surveys and preventative maintenance programs

 Energy Conservation • Sevco’s “4 Phase Steam Program” • Internet Based SEVCO Computerized Valve Survey System (SCVSS) • Steam Trap, Unit Heater and System Surveys

 Engineered Systems • Automated and Continuous Blowdown Systems • Burner Management Systems • Desuperheating & Steam Conditioning Systems • Boiler Controls • Condensate Recovery Systems • Relay Protection Panels • Skid Systems • Relay Protection Panels • Skid Systems

800.452.1928 207.873.7741

After–hours Emergency Service: 207.872.4779

37 Heywood Road • Winslow, ME 04901

F.W. WEBB COMPANY

17

Industrial Plastic Plastics Piping Products UtilitiesSupply SupplyCompany Company• •5050Everberg EverbergRd., Rd.,Woburn, Woburn,MA MA01801 01801 Utilities ContactDave DaveMcGlynn McGlynnororIanIanPower Power• •800.343.7555 800.343.7555 Contact

John Romano Vice President, USCO

LINE CARD uscosupply.com

Your complete source for thermoplastics Flow meters/Controls Blue-White • Signet • Ashcroft • GPI

Inline / Paddle Wheel / Turbine / UltraSonic

valves

Asahi/America • Hayward • George Fischer • Spears • Plastomatic SMC • Xomox

Ball / Ball Check / Butterfly / Relief / Regulators / Lab / Degassing / Automation

pumps Blue-White • LMI • Versa-Matic • Hayward • Finish Thompson • Rule • Little Giant

Injection / Diaphragm / Peristaltic / Magnetic / Sump / Drum

gauges Plastomatic • Ashcroft

Liquid-filled / Industrial / Commercial / Guards

filters/strainers Hayward • Asahi/America • Harmsco • Banjo

Basket / Sediment / Bags / Elements

tanks Assman • St. Gobain • Chemtainer

Vertical / Horizontal / Bulk Storage / Containment / Fabrication / Tank Stands

mixers Neptune • Finish Thompson

Lab / Industrial / Drum

level controls STI • Flowline • Compac

Single Point / Continuous / Controls / Ultrasonic

pipe/fittings

Harvel • Charlotte • Spears • Asahi/America • Chemtrol • Zurn • Resistoflex Ameron • Banjo • +GF+ Cool-Fit® (Georg Fischer)

PVC-80 / CPVC-80 / Polypropylene / PVDF / HDPE / Acid Waste / High Purity Fusion Equipment Program / Double Containment / FRP / Lined Steel

tubing/hose Parker-Hannifin • Zeus • St. Gobain • Resistoflex • Gates

HDPE / Polypropylene / Teflon® / Tygon / Reinforced / PVC

blowers/duct St. Gobain • Harvel • Spears

PVC/CPVC / Duct / Fittings / Industrial Blowers / Fabrication

tools Reed • Craftsman • Laramy • Asahi/America

Plastic Cutters / Welders / Beveling / Manual and Automated Fusion Equipment

Accessories

Banjo • IPS • Hercules (PVC/CPVC Solvent Cements) • Clic

Solvent Cements / Primers / Hangers / Applicators

18

F.W. WEBB COMPANY

www.fwwebb.com

Utilities Supply Company • 50 Everberg Rd., Woburn, MA 01801

Plastics

Contact Dave McGlynn or Ian Power • 800.343.7555

COOL-FIT – For Secondary and Indirect Refrigeration Systems Georg Fischer Piping Systems, based in Tustin, CA, is pleased to announce that F.W. Webb Company has been selected to distribute COOL-FIT® ABS and COOL-FIT® ABS Plus for cooling and refrigeration products in New England and New York.

The combination of GF Piping Systems global experience in cooling and refrigeration piping systems and F.W. Webb’s well established presence in the New England marketplace should prove a dynamic partnership.

GF Piping Systems is a global supplier of piping systems, including fusion technologies, flow and analytical instrumentation, heat transfer and custom fabrication of a broad range of thermoplastics.

COOL-FIT® ABS Plus is a complete preinsulated plastic piping system for secondary cooling and refrigeration piping systems. The system is based on the tried and tested ABS plastic system from GF Piping Systems, in use since 1986, now with the option for preinsulated pipe and fittings with outer jackets in either black or white.

The white version is ideal for hygienic environments such as food processing plants.

COOL-FIT® ABS Plus in black is suitable for outdoor applications, because the black PE is UV resistant.

The system is vapor-tight and 100% water-tight.

Thanks to the new, revolutionary COOL-FIT® nipples for joining inside pipe diameters, the PUR insulation does not need to be removed before performing a joint. The joints use the tried and tested solvent cement joining technique with TANGIT ABS.

The result: Minimum onsite time, considerable cost savings and top quality.

Jacket Pipe HD-PE to DIN 8075 in black or white. White PE is only moderately UV resistant and is recommended for indoor applications.

Carrier Pipe ABS • 150 psi rated, cement jointed ABS plastic pipe • 5 meter lengths • ABS Pipe to ISO 15493 Hard Polyurethane Foam (PUR) • Thermal conductivity 0.026 W/m.K (at 50˚C) • Foamed using polyol and isocynate (no freons) • Expansion coefficient 0.04 mm/m.K • Core density . 2.8ft/ft3 • Average cell sizes 0.5 mm

Complete System

Parameters

Suitable Mediums

• COOL-FIT® ABS: 16 mm to 315 mm (3/8” to 12”) • COOL-FIT® ABS Plus: 25 mm to 225 mm (3/4” to 9”) • Pipe, fittings, valves, measurement and control

• 150 psi • COOL-FIT® ABS: -40˚C to +60˚C (-40˚F to 140˚F) • COOL-FIT® ABS Plus: -50˚C to +40˚C (-58˚F to 104˚F)

• Water • Iced Water • Ice Slurries • Salt Solutions • Organic Salt Solutions • Glycol Solutions • Alcohol Solutions

Not for use with refrigerants, e.g. R22, ammonia, CO2, R407, etc.

Harpoon brewery in South Boston Seaport District is the first company in New England to install a Georg Fischer Cool-Fit® Plus piping system. Harpoon has installed over 150’ of 5” pipe and over 210’ of 3” pipe with fittings of each sizes. Cool-Fit® Plus is in use now carrying glycol at 18˚ to cool down Harpoon’s beer before bottling. Harpoon will expand in Boston and at their sister plant in Windsor Vermont. They will be looking to F.W. Webb to supply their piping needs. Cool-Fit® is stocked at the F.W. Webb USCO warehouse in Woburn.

Please call: 781-933-1804 for all your Cool-Fit inquiries.

Fall 2008

F.W. WEBB COMPANY

19

Specialists in BioProcessinG Components 1.877.WEBB.BIO • 401.463.4176 • FAX: 401.463.4160 Contact Jim Bodle • www.webbbiopharm.com

Jim Bodle General Manager

LINE CARD webbbiopharm.com

biotechnology • pharmaceutical • life sciences Alfa Laval Inc.

(Newly Consolidated TriClover G&H Product Offering) • TriClover Tri-Clamp® and BPE Orbital Weld Fittings • Centrifugal Pumps, High-Efficiency and Standard-Duty Pumps • Positive Displacement EHEDG Approved Pumps • Miscellaneous Tank Equipment, Instrumentation, and Valves • Toftejorg Spray balls

Saunders Sanitary Diaphragm Valves • Aseptic Sanitary Diaphragm Valves • Engineered Bio-Block Standard and Custom

Valves, Multiport Diverter Valves

• Automated Valves with full line of accessories

that include: Module Switchbox, Limit Open Stop, Mini Switchbox, Solenoid Valves • Fully-Traceable Diaphragms (USP Class VI Compliant) • Multiple options for manual bonnets including padlock, limit open stop, limit closing top options

HNA (Habonim North America) • 48 Series Tubore Tube-Bore High Purity

Ball Valves

• Sanitary Pressure and Temperature Gauges • Sanitary Instrumentation

Spirax-Sarco

(Exclusive New England Stainless Steel Specialty Products Distributor) • Stainless Steel Specialty Products

– Sanitary Steam Traps – Pressure Regulators

Newman Sanitary Gasket • Sanitary Gaskets USP Class VI • Orifice Plate Gaskets, Screen Gaskets,

Specialty Tank Gaskets

Westlock Controls • Valve Monitoring and Control Products • Intellis® Network Monitors

Avins Fabricating • Custom Designed and Fabricated Vessels • ASME Code “U” Stamp Facility for New

Construction and National Board “R” Stamp for Rework of Existing Pressure Vessels • Rapid Turnaround to Meet the Most Aggressive Project Schedules

Fluidline • Custom Designed Components including

• Sanitary Tank Bottom Valves • Unique Zero-Deadleg Ball Valves • Compact 4-Piston Space-Saving Actuator

Trent and united Tube • Pharmaceutical Grade 304, 316L SST Tubing • ASTM A269/270 S2 per BPE • Trent 10MAX, 15MAX and 20RA Mechanical

Stocking Distributor

Resistoflex (Division of Crane Co.) • Teflon Lined Pipe, Fittings, and Custom

Fabricated Spool Pieces

• Teflon Hose and Fittings Fabricated to Order

Rubberfab Technologies Group • USP Class VI Sanitary Gaskets • Specialty products such as Controlled

Compression gaskets, Tuf-Flex gaskets, Biological Indicators, Replacement Filler parts

20

Ashcroft

F.W. WEBB COMPANY

In-house Valve Porting • Process Manifolds,Valve Manifolds and Spool Pieces • Unique Compact Shell and Tube Heat Exchangers • Full Line of Sampling Valves

WIKA • Sanitary Pressure and Temperature Gauges • Inline Seal Assemblies • Electronic Pressure Measurement

Programs and Services

• E-commerce – www.fwwebb.com – WebbConnect – www.supplyFORCE.com

• Single Source Solutions – Integrated Supply – Vendor Managed Inventory (VMI) – Dealers Choice

• Engineered Control Panels and Skid Systems – Environmental – Process

• Bottom Line

Steam Surveys and Education

• 1-888-GET-PIPE Mechanical Contractor Program – NO EQUAL

Webb Bio-Pharm 3 Slater Road Cranston, RI 02920 www.fwwebb.com

HVAC/R & Controls 800.253.7838 • 781.933.1804 • Fax: 781.933.3528

John Thomas Vice President HVAC/R & Controls

LINE CARD

COMMERCIAL Controls ● Direct Digital Controls York* Honeywell Johnson Controls Zonex ● Electric Honeywell Johnson Controls Siebe – Barber Colman Siemens – Landis, Powers Zonex ● Electronic Arzel York* Honeywell Johnson Controls Siebe– Barber Colman TCS Basys Zonex ● Pneumatic Honeywell Johnson Controls Siebe– Barber Colman Siemens – Landis, Powers Heating, Air Conditioning & Ventilation Equipment ● York* Air Handlers Coils Condensing Units Economisers Indoor Air Quality Roof Top Units ● Air Handlers York* Daikin* Cambridgeport (custom) Chandler (built-up) MultiAqua First Company Magicaire ● Chillers York* Daikin* MultiAqua Waterfurnace (water/water) ● Coils York* Chandler (Heatcraft) Precision Coils (built to spec)

Fall 2008

● Condensing Units York* Daikin* MultiAqua Chandler (Heatcraft) ● Curbs Adaptor Siesmic Vibration ● Duct Heaters Modine (gas, hot water) Q-Mark (electric) Sterling (gas, hot water) Warren Electric (electric) ● Ductless Split Systems Daikin* – Inverter System Comfortaire ● Ductless VRV (Variable Refrigerant Volume) Daikin* ● Economisers York* Cambridgeport Air Systems Micrometl ● Energy Recovery Ventilators York* Carnes Lifebreath Micrometl ● Exhaust Fans Airflo Carnes ● Geothermal Heat Pumps GeoSmart* Water Furnace International ● Make Up Air Units Air Fan Applied Air Modine Sterling ● Packaged Terminal AC & HP York* McQuay ● Registers, Grills, Diffusers Carnes Hart & Cooley Lima ● Rooftop Units York* Air Fan (custom) Nesbitt (vav, multizone) ● Self-Contained Packaged Units York*, Bard, Skymark International/ Johnson Controls

● Unit Heaters Modine Sterling ● VAV Boxes (Variable Air Volume) Johnson Controls Carnes ● Water Cooled Modular Chiller MultiAqua Water Furnace International ● Water Source Heat Pumps Water Furnace International Compressors ● Hermetic Bristol Carlyle Copeland Tecumseh ● Semihermetic (stock to 100 HP) York* Carrier Carlyle Copeland Dunham Bush Trane Worthington O.E.M. HVAC Parts York* American Air Filters Climate Control Climate Master Herman Nelson McQuay Nesbitt Remington Singer Source 1 Sporlan Also Available Air Doors Boilers Cooling Towers Ductless Splits Fluid Coolers Full Inventory of HVAC and Control Parts/Accessories Hanging Stock Humidification/ Dehumidification Systems Hydronic Specialties Pumps Vibration Isolation *F.W. Webb is the exclusive distributor of York products and Daikin products for New England and Upper New York.

F.W. WEBB COMPANY

21

HVAC/R & Controls

800.253.7838 • 781.933.1804 • Fax: 781.933.3528

energy saving commercial equipment

 Millennium Split System 2 and 4 Pipe Condensers 15 to 50 Ton

All models include the Simplicity controls system, engineered for ease of set up and programming, to provide alarm monitoring. Free local networking carries all alarm and diagnostic data directly to an on-site PC. When available,York Wireless data can be transmitted virtually anywhere.

These units are completely assembled, piped and wired at the factory to provide one-piece shipment and rigging. Each unit is pressurized with a holding charge of refrigerant-22 for storage and/or shipping.

The compact design, clean styling, low silhouette, and quiet operation make these condensing units suitable for almost any outdoor location.

• Meets or exceeds Ashrae 90.1-1999 standards • Simplicity Controls • Inherently protect condenser fan motors • V-Coil Design with exterior service port connections • Five-minute anti-short cycle timer and minimum compressor run time • Standard operation to 40 F. Fieldinstalled Low Ambient VFD Control to 0ºF • Factory installed disconnect and Technicoat coils option • Scroll compressors provide both high efficiency and reliability • Condenser coils are constructed of copper tubes and aluminum fins for durability and long lasting efficient operation • Crankcase heaters that will be de-energized when the compressor is operating • Self contained high and low pressure controls • Solid state or internal line break compressor motor protection • Class 2, 24-volt thermostat control circuit

 Large Commercial Rooftops (Y) 25, 30 and 40 Ton

York Millennium® Rooftops offer the flexibility to meet the requirements of a wide range of installations.They’re built to last and priced to compete.

Numerous options can be added to the base unit to satisfy almost any specifications —from the simple to complex. Units are offered in the following combinations: • Cooling Only • Cooling/Gas Heating (Natural Gas or Propane) • Cooling/Electric Heat • Cooling/Hot Water Heat • Cooling/Steam Heat In addition, these units are designed with the flexibility to support the industry’s best practices for indoor air quality.All these features are available on 25, 30- and 40-ton single-package units that are easy to install, use, and maintain. Factory-installed options, such as economizers, power exhaust, high-efficiency motors or filtration, barometric damper relief, 0° low ambient, high-capacity evaporator coils, and single-unit disconnect, add to the versatility of these self-contained rooftops.

• Double-wall construction with galvanized sheet metal liner to protect against microbial growth.

• Rigid sheet metal inner liner to keep insulation out of the airstream.

• Sloped drain pan protects against pan corrosion and bacterial growth.

• Pitched roof design for natural drainage.

• Scroll compressors for efficiency and durability. Multiple refrigeration circuits for greater turndown and the best unloading capabilities in the industry. connection for BAS compatibility.

• Extended flue connection on gas units to eliminate the possibility of corrosion in the furnace heat exchanger.

• Constant air volume or Variable air volume by inlet guide vanes or variable frequency drive.

• Full range of airflows and static pressures to meet most every application requirement.

F.W. Webb is the exclusive distributor of York Heating and Cooling Systems and Source 1 Parts for New England and Upper New York.

 variable refrigerant volume (VRV) system Optimized R410A Design

make-up air units

❶

This industry benchmark is the world’s first R410A-operated variable refrigerant ❷ volume (VRV) system and represents ❸ a considerable advance in efficiency ❹ over competitive systems. ❶ Aero Fitting Grille and Aero Spiral Fan❺ ❷ DC Fab Motor ❸ Sine Wave DC Converter ❹ E-Pass Heat Exchanger ❺ Reluctance Brushless DC Compressor Optimized R410A design: The motor comprises powerful neodymium Daiken sets the industry standard magnets that generate the reluctance torque.

These magnets are approximately 12 times stronger than ferrite magnets and contribute to its substantial energy-saving performance.

➊ ➋ ➌ ➍ ➎

22

 duct furnace heating, ventilating and

F.W. WEBB COMPANY

WeatherPack II There are two basic types of WeatherPack II units: gravity vented or power vented.

Gravity vented units (Models PBG and PSG) are provided with factory supplied vent caps. Power vented units (Models PBP and PSP) include an integral 115V/24V power venter as standard. The power venter is supplied with a ball bearing motor and includes a centrifugal switch for positive interlock with the gas controls.

www.fwwebb.com

800.253.7838 • 781.933.1804 • Fax: 781.933.3528

HVAC/R & Controls YORK AUTHORIZED FACTORY PARTS

Fall 2008

F.W. WEBB COMPANY

23

Refrigeration 781.272.6600 • fax: 781.275.3354 Contact Harry See

Harry See Vice President Refrigeration

LINE CARD

REfrigeration & HVAC Parts Chemicals ● Detergents & Solvents

Virginia, Rectorseal, Nu-Calgon ● Oils

Virginia, Nu-Calgon, Source 1 ● Propylene Glycol

Hercules ● Solder & Fluxes

Harris, Highside ● Water Treatment

Virginia, Nu-Calgon Compressors ● Tecumseh, Bristol, Carlyle,

Embraco, Copeland Controls ● Belts

Mars ● Capacitors

Mars ● Contactors & Relays

Mars, Honeywell, Tecumseh ● Hard Start Kits

Supco, Mars ● Overload Protects

Mars, Tecumseh ● Phase & Voltage Protectors

ACT, ICM ● Temperature & Pressure

Ranco, Honeywell, Johnson,

Mars, ACT ● Timers

Paragon, Mars ● Time Delay Relays

Mars, Supco, Honeywell ● Thermostat Wire

Baron, Source 1 ● Transformer

Honeywell, Mars, Jard Equipment ● A/C Room Units

Comfort-Aire ● Air Doors

Mars, Virginia ● Condensing Units

Tecumseh, Heatcraft ● Evaporators

Chandler, Heatcraft ● Ice Machines

Scotsman, Hoshizaki, Howe ● Strip Door

Curtron, Aleco ● Walk-In Boxes

Amerikooler, Crown, Harford

24

Filters ● Air Cleaners

York, Trion (Airbear) ● Bag, Hepa, Pleated, Standard

Precisionaire ● Water & Ice Machine

Aqua Pure, Nu-Calgon, Virginia Gauges ● Meter Chargers

TIF, CPS ● Temperature, Thermo

Cooper, TIF, SUPCO ● Temperature Meters & Tester

Fluke, UEI, TIF, Amprobe,

CPS, Mastercool Hanging ● Superstrut

Nuts, Washer, Deep Strut,

Narrow Strut, Top Beam, Side

Beam, F & M Rings, Threaded

Rod, Brackets, etc.

Motors ● Fractional HP

Emerson, Fasco, Marathon,

Magnatek Parts ● York, Source 1/Factory Authorized Parts ● Electric Condensate Drain Pans

Supco, Gem ● Filter Driers

Sporlan, Parker ● Refrigerator Hardware

Door Latches, Gaskets ● Sight Glass

Sporlan Pumps ● Condensate Ice Machine Pumps

Little Giant, Beckett, Hartel ● Oil

Ritchie, Virginia, Nu Calgon ● Vacuum Pumps

Ritchie, J/B, Robinair Refrigerants ● ALL Types & Sizes

Honeywell/Genetron ● Refrigerant Reclaim

Flourotech (Stinger), Promax ● Reclaim Program

F.W. WEBB COMPANY

Tools ● Accessories Silicone, Sand Cloth, Duct Tape, Gloves, Glues, Wire Nuts, Leak Detector, Foam, Insulation Tape, Tubing Cutters, Flashlights ● Charging Hoses

J/B, Ritchie, Robinair ● Drill Bits, Hole Saw, Blades

Lenox ● Electric Drills

Milwaukee ● Hand Tools

Klein, Ridgid, Channel Lock,

Craftsman ● Manifolds–Refrig. Test

J/B, Ritchie, Robinair ● Pressure Washer

Maxi-vac ● Soldering Tools

Turbo Torch, Unweld ● Sprayers

Virginia, Nu-Calgon Tubing & Fittings ● Brass: J/B ● Compression: Anderson ● Copper: Mueller, Nibco ● Copper ACR Nitrogen: Mueller, Cerro ● Plastic: PVC, ABS ● Plastic Vinyl: J/B, DVT ● Solderless Fittings: Lokring Valves ● Ball Refrigeration

Superior, Henry, Mueller ● Charging

J/B, Ritchie, Source 1, CPS ● Float Compressor

AC&R ● Float Tower

Flippen ● Flow Regulating

Sporlan, Parker, Source 1 ● Gas Regulating

Honeywell, Johnson, Asco,

Robertshaw ● Pressure Regulating

Sporlan, Johnson, Parker ● Refrigeration Ball Valves

Mueller, Superior ● Solenoid – Refrigeration

Sporlan ● Thermostatic Expansion

Sporlan ● Water Regulating

Asco, Johnson ● Water Solenoids

Asco, Sporlan www.fwwebb.com

LINE CARD

Plumbing 781.272.6600 • fax: 781.275.3354 Contact Tim O’Connell or Dean Plouffe

Tim O’Connell Dean Plouffe Product Manager Product Manager Residential Plumbing Institutional/Property Management

Plumbing parts & equipment • Pumps & Water Systems Plumbing Equipment • AB & A • Acorn • Acryline Tubs • Alsons • Ancon • American Standard • Aqua Glass • Basco • Bertch Vanities • Bock Water Heaters • Bradford White • Bradley Wash Fountains • Brasscraft • Brasstech • Brizo • Charlotte PVC • Chicago Faucets • Church Seats • Conbraco • Cozy • Danze • Delta • Dormont • Elkay • Fiat • Fluidmaster • Flush Valves – Zurn, Sloan, Toto • Gamco Washroom Accessories • Gerber • Ginger Accessories • Grohe • Halsey Taylor • Insinkerator • Jacuzzi • Jado • Kinzee • Keeney • KWC

Heating Equipment • MAAX Aker • McGuire • Metpar • Moen • Newport Brass • Nibco • Oatey • Oliveri Sinks • Panasonic Bath Fans • Plumbtrim • Ponte Guilio • Porcher • Powers • Progressive Cabinetry • PurePro® • Ridgid ProPress • Rinnai • Robern Medicine Cabinets • Showhouse • Sloan • Speakman • Steamist • Stern Williams • Strasser Vanities • Swan • Swanstone • Symmons • Toto – Commercial / Residential • T & S Brass • Taco • Trac Pipe • Water Pik • Watts • Watts WaterPEX • Wilkins • Woodpro Vanities • Woodford • Zurn Acid Waste

• Airco • Buderus • Burnham • Peerless • Weil McLain • Munchkin • Petite Baseboard • Watts Radiant • Superstor • Teledyne Laars • TRIO by PurePro® • Amtrol • Daiken • Hi-V Air Conditioning • Quiet-One • Modine • Vaughn – Sepco • York Plumbing Parts

Tools & Safety

• American Standard • Bradford White • Chicago Faucet • Delta • Eljer • Fluidmaster • Gerber • Grohe • Jones Stephens • Moen • Pasco • Radiator Specialty • Sioux Chief • Sloan • Symmons • Toto • Watts Backflow • Water Heater Parts

• Craftsman • Lenox • Milwaukee

Fall 2008

• Rayovac • Reed • Ridgid

Energy Solutions • Solar Energy Solutions • Geothermal Systems • Solid Fuel/Combination • High Efficiency Boilers • High Efficiency Gas Furnaces • Water Heating • Space Heating • Retrofit Solutions

TM

o

Pumps & Water Systems • American Granby • AMF Cuno • Amtrol • Boshart • Campbell • Charter Plastics • Extrol • Goulds • Hartel • Kalas • Liberty Pumps • Little Giant • McClean Water Conditioners • Parker Fittings • Pentek • PurePro® • Sta-Rite • WaterSoft • Well-X-Trol • Well Mate

C

O

R

P

O

R

A

T

I

O

N

®

F.W. WEBB COMPANY

25

Heating Parts & Equipment 781.272.6600 • fax: 781.275.3354 Contact Joe Ruggiero

Joe Ruggiero Product Manager Heating

LINE CARD

Heating Parts

}

White Grundfos Logo

Heating Equipment

C

O

R

P

O

R

A

T

I

O

N

HVAC Parts

26

F.W. WEBB COMPANY

www.fwwebb.com

Industrial Specialties  Strainers

 screwed SB-7 Y-strainer

 flanged SSA-7 Strainer

For start-up on most applications, a temporary strainer used before installing a strainer for permanent use.

Available in all sizes 1½” – 42”; in carbon or stainless steel; in the form of a cone, basket, or plate style with an assortment of different perforations, mesh, and lengths if necessary.

1/4” - 3” 600# screwed & socket weld available in carbon & stainless steel material offered as an import style SB-7I & SSB-7I domestic style SB-7 & SSB-7 Y-strainers.

1/2” - 12” 150# & 300# flanged & buttweld available carbon & stainless steel material offered as an import style SA-7I & SSA-7I domestic style SA-7 and SSA-7.

Now stocking the screwed carbon SB-7I (1/2” – 2”) at the Amherst CD-branch.

For larger sizes please consult factory.

 flanged SGFV-K Strainer 2” – 12” 150# & 300# flanged SGFV-K knob type basket strainer for easy access available in carbon & stainless steel material style SGFV-K & SSGFV-K. Also available in threaded.

 forged steel Gate and Globe valves A total containment solution is available with the installation of a Flowserve Vogt Bellowseal Gate Valve constructed to positively eliminate any leak paths at the bonnet joint and packing.

Features:

• Fully rated Class 800 • Zero environment leakage • High strength multi-ply bellows

• Flexible Graphite packing • Full hard faced

 forged steel fittings Phoenix *Capitol domestically manufacturers a full line of forged steel fittings and unions along with branch connections marketed under Trans-OCon. All Phoenix *Capitol products are produced to the latest ASME, ANSI and ASTM specifications and adhere to existing Approved Manufacturing Lists.

 Globe valves Suitable for throttling as well as shut-off.

They are customarily installed so that the media pressure and preferred flow direction is under the disc. Flow above the disc is also acceptable.

Features:

• Quick lead times • Valves for servicing include: Nuclear, Alkylation, Sour Service, Cryogenic, Low Temperature and more • Qualified under the ISO 9001 Quality System

Fall 2008

& European Pressure Equipment Directive • Hard faced seats • Spiral wound gasket or bellowseal • Bolted bonnet or seal weld bonnet

F.W. WEBB COMPANY

27

Industrial Specialties

BMS Parsons Project

Inaugural A-D Expansion Joint and Industrial Metal Hose Training Seminar July 23-24, 2008 From left to right: Dan Huck of Columbia Pipe & Supply Co.; Kris Jury of Industrial Piping Systems; Ken Powell of F.W.Webb Co.; Jim Mummert and Chris Davis of Industrial Piping Systems; Mark Yonnick of Flex-Hose Co., Inc.; Dan Paulhamus and Doug Zimmerman of Industrial Piping Systems, Jeffery Frain of A&M Industrial Supply; George Prywara of Industrial Piping Systems; and Steve Kitchen of A&M Industrial Supply.

(From left to right): Edgar Aquilar – Webb Account Manager, Mark Burlingham – Bristol Myers Squibb, and Mike Perry –Webb Operations Manager discuss supply chain issues at the new BMS facility in Devens, MA.

F.W. Webb’s Concord, NH Store Construction Well Under Way F.W.Webb’s brand new store in Concord, New Hampshire is almost complete.They held a “Pre-Opening” BBQ in late August to introduce the new store location to customers in the area.The opening is scheduled for October 27th, 2008.

Steve Minichiello, a Crane Valves Representative (l) and Rex Blankinship of BMS (r) give final checkout on all the valves installed in the utilities piping area at Bristol Myers project.

Kentrol/Sevco – Alstom IATAN Project

EQUAL TIME NEED caption here

Frank Angeloro (l) and Ron Wyzik (r) in front of Yankees Monument Park, in Bronx, NY.

28

Photos above and right portraying the large Pipe headers being fabricated by KENTROL/SEVCO. They will be attached in the field with the dispersion tubes for ammonia gas that will be mixed with the flue gas to reduce NOX Emissions!!

F.W. WEBB COMPANY

www.fwwebb.com

Tools M12 Hackzall Reciprocating Saw M12 ¼” Hex Impact Driver 2450-22 • Best-in-class 850 in lbs. with 2,000 RPM that only weighs 2.3 lbs.

• -Quick bit-loading ¼” hex chuck enables bit insertion and release to be done with one hand • Variable speed trigger designed for output power control with Built-in LED work light for added visibility

2420-22 • Industry first M12 Reciprocating Saw with 3000 Strokes p/m and ½” stroke length provided with a variable speed trigger • Keyless QUIK-LOK™ Blade Clamp allows for quick and easy blade changes with allmetal gear case for added durability.

M12 Work Light 49-24-0145 • 90˚ pivoting head with integrated magnet • Ergonomic, compact, and lightweight design for operator comfort

 drum-type drain cleaning machines User-Friendly, Hassle-Free RIDGID drum-type drain leaning machines satisfy the portability, performance, durability and productivity requirements of contractors, maintenance departments and property managers. They offer power ranges, cable lengths, and cutting tool options to attack any blockage.

A wide selection of sectional machines and other power and manual cleaning tools are also available.

M12 Copper Tubing Cutter

 5 Piece Switchblade Plumbers Kit

2471-22 • Close quarter rotating cutting head cuts pipe in confined spaces with as little as 1½” of clearance automatically with trigger.

• 10X faster than conventional cutters and automatically adjusts diameter to cut through 3/8” - 1” copper tubing • Auto locking mechanism Ultraefficient drive mechanism delivers over 200 cuts per charge

49-22-5100 • Never sharpen again with Replacement blades made with hardened steel increasing bit life • Aggressive feed screw design allows the bit to pull through the wood faster, resulting in faster drilling • Includes: 4 Switchblade Selfeed Bits: 1-3/8”, 1½”, 2-1/8”, and 2-9/16” • 1 Universal Quik-Lok® Extension: 5½” x 7/16”

5½”, 12”, 18”, and 24” Universal Quick Lock 7/16” Extensions 48-28-1030 • Quick change of bits, no tools required!

• Impact Rated, making this the most versatile extension on the market

 model 975 combo roll groover The Model 975 Combo Roll Groover is two tools in one! Use it manually for in-place overhead applications or, like other RIDGID® groovers, mount it on the RIDGID 300 Power Drive for machine grooving jobs.

Auto Tracking And Depth Setting Gauge Means Easier Use The 975 Combo Roll Groover includes a patented auto tracking technology for significantly easier grooving. Whether you’re doing machine or manual grooving, auto tracking keeps the pipe automatically engaged to the groover throughout the grooving process. The 975 also comes with a permanently-fixed depth setting gauge for quicker, repeatable set-up.

Less Hand Force Compared to competitive units, the 975 has a 55% higher gear reduction requiring less hand-force for manual grooving. This is especially helpful for overhead grooving.

Durability And Portability A tough, ductile iron construction means the 975 can absorb job site abuse and provide accurate grooves time after time. And its cast-in handle makes the 975 easily portable to and from the job site.

Fall 2008

F.W. WEBB COMPANY

29

Tools Roll Groover

RGCOMBO2

2-in-1 unit for power and manual roll grooves. Capacity of 1 1/4” – 6” for up to Sch. 40 steel, stainless steel and aluminum pipe.

No groove roller or shaft changeout required. Includes both straight and bent handle ratchet wrenches. Compact, portable design with built-in handle for improved mounting and transporting. All gears enclosed in the casting to minimize debris entering tool. Consistent tracking makes this tool great to use time after time.

 Power Drive

 mechanical hot

The Reed Power Drive rotates the pipe while cutting, threading, or reaming operations are performed on up to 2” diameter pipe and conduit.

WHY REED? Flat top of housing is ideal for placing tools.

Power drive includes long-lasting HSS dies, not alloy dies. Also, Reed’s Power Drives are approved to the latest USA and CSA Canadian standards!

DM3MECH

05303 (5301PDCOMBO)

tapping machine

Hot tap using the DM3MECH mechanical drilling machine. With the right hole saw, cut or drill for up to 4” valves on copper, steel, or plastic pipe. Both DM3MECH and DM3MECHB come with a heavy-duty plastic, compartmental toolbox. DM3MECH contains the drilling machine, along with 7/16” Hex Arbor, 1/4” Drill Bit, seven Hole Saws, Allen wrench and toolbox. DM3MECHB is the drilling machine in a toolbox only without hole saws or arbor. These machines require a 1/2” drill motor, valves and fittings that are all sold separately.

BINGHAMTON, NY OPEN HOUSE September 4, 2008

F.W. Webb’s Binghamton Open House was a great event that was well supported by both new and old customers alike.

Vendor support was outstanding. Lots of food and prizes were available and the cigar tent was a big hit!

F.W. Webb Binghamton is looking forward to servicing the Southern Tier area with this new 53,000 sq. ft. facility!

Emerson-Swan supporting our new customers.

(From left to right): Denise Pallotta, Lisa Starley and Marsha Moulton.

Andy McMahon (l) and Tom Button (r) of McMahon Marketing.

The Big Party!

John Dwyer of Webb Pump (l) and Larry Rizzi of Gorman-Rupp (r).

Kevin Weir with Cerro Copper.

30

F.W. WEBB COMPANY

www.fwwebb.com

Vendor Managed Inventory

Dean Plouffe Regional Sales Manager dean@fwwebb.com

Contact: Dean Plouffe Phone: 781.272.6600

Is there money hidden in your

stockroom?

Through inventory analysis, stockroom organization and integration of technology, F.W. Webb’s Vendor Managed Inventory (VMI) can provide customized stockroom solutions that can save you substantial time and money.

Stockroom Analysis  Optimum Min/Max levels for each item  Elimination of obsolete material  Reduction of excess inventory  Space utilization Technology Solutions  Barcode systems  WebbConnect internet based ordering  Sitemaster online inventory management software  Integration with existing software modules Benefits  Reduced inventory investment  Increased fill rates/reduced backorders  Fewer errors in order processing  Improved speed of order processing  Less down time  Reduced expediting and freight charges  Accurate inventory reporting

Let F.W. Webb’s Transaction Analysis Program (TAP) work for you!

Fall 2008

F.W. WEBB COMPANY

31

Through www.fwwebb.com to WebbConnect, you can: Place Orders • Get Pricing • Check Inventory Evaluate Heat Loss/Gain • E-mail

70 Convenient Locations CONNECTICUT Franklin 888-642-9086 Hartford 800-252-9322 Hartford Victor 800-243-9360 New Haven 800-636-7524 Waterbury 800-572-6479 MAINE Augusta 800-322-4700 Bangor 800-432-7371 Biddeford 800-443-0505 Caribou 800-339-3029 Ellsworth 888-882-9322 Lewiston 800-252-2000 S. Portland 800-482-0791 Rockland 800-287-0015

Winslow F. W. Webb 800-640-9322 Kennebec Supply Kentrol/Sevco 800-533-1172 MASSACHUSETTS Auburn 800-872-0211 Bedford 800-221-9322 Bellingham 508-966-4999 Boston 617-482-8387 Brockton 800-544-WEBB Canton 781-828-5559 Dedham 800-820-9322 Fitchburg 800-322-0899 Gloucester 978-283-7800 Greenfield 800-564-3644 Haverhill 800-521-7499

Hingham 781-749-9322 Hyannis 800-352-3159 Lowell 800-642-9322 Malden 800-963-7111 Methuen 866-548-9322 New Bedford Babbitt 888-354-0048 Northampton 800-282-7721 Pittsfield 800-578-9322 Plymouth 508-830-0125 Salem 800-345-5025 Springfield 800-660-3141 Sturbridge Pipe Depot 508-347-3342 Woburn 800-253-7838 Utilities Supply 800-343-7555

NEW HAMPSHIRE Dover 800-582-7196 Exeter 888-993-9322 Gilford 800-345-1771 Keene 800-235-1218 Lebanon 800-322-8707 Madison 800-852-9203 Manchester 800-789-6488 Nashua 800-462-1440 NEW YORK Albany 800-432-9322 Binghamton 888-593-9322 Clyde 800-828-8824 Plattsburgh 800-622-9322 Queensbury 800-826-0326

Syracuse 800-262-9222 Utica 315-724-3191 RHODE ISLAND Cranston 800-795-6390 Webb Pump 866-850-7867 Webb Bio-Pharm 877-932-2246 Warwick 888-225-6850 VERMONT Barre 800-244-5044 Bennington 800-821-9506 Brattleboro 800-821-9511 Rutland 800-622-4365 Springfield 800-872-5303 St. Albans 800-696-3763 St. Johnsbury 800-872-8028 Williston 800-696-0340

F.W. Webb is a member of the following associations: A-D (Affiliated Distributors), ISPE, TAPPI, NECCARAPA, and MHEC.

We hope that you enjoy this new Line Card Edition. These line cards represent the products and services that Webb inventories in 70 plus locations in New England and New York. 1500 customer service people are available to help you whenever you need anything in Refrigeration, Heating, Cooling, Plumbing, Piping, Industrial Plastics, Valves, Controls, Pumps, LP Gas or Fire Protection.

Webb is constantly adding to the menu based on new technology, energy, environmental considerations and the input of our customers!

Thanks for your support!!

TAKE OUR ONLINE

VIDEO TOUR

An informative, 2–minute tour of Frank Webb’s Bath Center Showroom.

Visit frankwebb.com and click on the TV icon.

For questions or comments, please email Carol Rosinski (Production Manager) at crr@fwwebb.com.

F.W. WEBB COMPANY 160 Middlesex Turnpike Bedford, MA 01730 www.fwwebb.com We Honor:

F. W. Webb is a participant in American Express’s Corporate Procurement Card Program.

F. W. Webb Company is in no way responsible for any printing errors, omissions or typos in the WinSheet.

Presorted Standard US Postage Paid Permit No. 12 Bedford, MA