WinSheet - Fall 2009

F.W. WEBB COMPANY

The Webb Industrial News is a Quarterly Catalogue of F.W. Webb Company

Sheet

WINTER FALL 2009 2007

2nd Annual

Fall Line Card Edition

In This Issue: In the News.....................................2-4

Webb Pump Line Card..................... 16

Webb HVAC – Source 1 Parts........... 24

Pipe & Tubing.................................... 5

Webb Kentrol/Sevco Line Card....17-18

Refrigeration Line Card..................... 25

Valves..........................................6-10

Webb USCO – Plastics Line Card...... 19

Heating Parts & Equip. Line Card...... 26

Hose................................................ 11

Thermoplastic Piping Systems............ 20

Plumbing Line Card.......................... 27

Webb Piping Solutions Line Card......... 12

Webb BioPharm Line Card................ 21

Industrial Specialties......................... 28

Specialty Process Piping & Hose Solutions.........................13-14

Webb HVAC Line Card..................... 22

Tools..........................................29-30

Webb HVAC – Energy Saving Commercial Equipment.................... 23

Safety.............................................. 30

Fire Protection Line Card................... 15

Industrial Line Card.......................... 31

In the

News . . .

Webb Pump and Webb Bio-Pharm Partner with Dover Pump Solutions Group!

October 1, 2009: Webb Pump and Webb BioPharm are extremely pleased to announce our new partnership with the Dover Pump Solutions Group (PSG). Formed in 2007, the Dover PSG family of companies consists of six complementary industry-leading lines including the following:

Almatec is a world leader in diaphragm pumping technology and is on the cutting edge of cleanliness requirements in the Pharmaceutical and Biotechnology industries. They offer the world’s first EHEDG approved diaphragm pump that is CIP-able, meaning that it can effectively be Cleaned-In-Place. In addition, with their unique check-ball system, the pump is fully drainable after cleaning and will not hold up critical product after a process run.

Wilden is a global leader in the design and manufacture of Air Operated Double Diaphragm pumps. The Wilden name is synonymous with quality and is a well-respected brand that you can trust.

Dating back over 70 years, Griswold Pump offers a complete line of ANSI standard pumps, end-suction centrifugal pumps, and vertical/submersible turbine pumps. With several hundred thousand pumps installations worldwide, Griswold services a wide range of chemical, industrial, and municipal applications.

Blackmer offers a full line of sliding vane style positive displacement pumps that are the optimal choice for difficult pumping applications such as products with higher vapor pressures, self priming applications, and liquids with entrained air. Sliding vane pumps are also used extensively for pumping fuel oil and other petroleum products.

Mouvex manufactures a unique eccentric disc positive displacement style pump that is volumetrically efficient, extremely gentle on the product (low shear) easily cleaned, and capable of self-priming. They are also seal-less in design making them extremely maintenance-friendly.

Well known for diaphragm chemical metering pumps, Neptune also manufactures complete packaged chemical feed systems that include storage tanks, agitation, and pump control.

plast-o-matic presents the “2008 top 10 club” saLES volume leader achievement award to utilities supply co.

(USCO)

(Left to right): Jim Matthews, USCO Outside Sales; Bob Sinclair,Vice President of Sales for Plast-O-Matic; and Stephen McGlynn, USCO Outside Sales.

2

F.W. WEBB COMPANY

With the addition of the full PSG family, more now than ever our company is well-positioned to offer problem solving solutions for virtually any type of application. We will be stocking components and complete pumps for the full PSG lineup in our Cranston facility and look forward to supporting your requirements.

Please contact Brian Clark in Cranston for more information!

Webb Pump and Webb BioPharm: Your Answer for Virtually any Pumping Requirement!

USCO Sales Team AcceptS Awards for outstanding sales performance Now in our New Methuen, MA location!

(Left to right): Jim Matthews, Dave McGlynn, Stephen McGlynn, John Romano, William Jangro, and Ian Power.

John Romano accepting the Asahi Distribution Award for 2008 for Excellence in Sales Achievement.

Stephen McGlynn accepting the Harvel Summit Club Award 2008 for Talent, Dedication and Product Knowledge, that has produced outstanding performance and exceptional loyalty.

www.fwwebb.com

...

(continued)

F.W. WEBB AWARDED MA STATE CONTRACT – Contract FAC58 –

Contact Dean Plouffe, Contract Manager at 781.272.6600 email: dean@fwwebb.com

Category1: Plumbing and Heating Supplies Category 2: HVAC Supplies At 24 F.W. Webb Massachusetts locations.

Eligible public entities within the Commonwealth of Massachusetts are as follows: •

Authorities

•

•

Cities, towns, municipalities, counties and other political subdivision of the Commonwealth

Not for profit organizations currently contracting with the Commonwealth to provide human and social services

•

Other states and eligible entities designated in writing by the State Purchasing Agent

•

Public Health hospitals

•

Quasi public agencies

•

Schools

•

Commissions

•

Departments of the Commonwealth

•

Institutions of higher education

•

Judiciary

•

Legislature

In remembrance of our servicemen and women on this upcoming Veteran’s Day.

Kentrol/Sevco Acquires Control Equipment Corporation Kentrol/Sevco, a division of F.W. Webb

The addition of Control Equipment to the

Company, has acquired Control Equipment

Kentrol/Sevco line-up also brings 100+

Corporation of Cazenovia, NY.

years of experience in the application, sizing,

Control Equipment Corporation, (CEC), is

selection, and servicing of control valves.

a major supplier of automated and control

Along with their direct manufacturer support,

valves to industries in the upstate New York

Control Equipment Corp. will be the technical

market. Along with their broad product line

support for F.W. Webb Company across their

offering, Control Equipment Corporation

marketing region.

also brings enhanced service capabilities

Welcome aboard Control Equipment!

such as field and shop repair for control and relief valves to our customer base.

www.controlequip.com Fall 2009

F.W. WEBB COMPANY

3

Central Distribution Amherst NH

...

(continued)

Experience is Key to our Business.

Our entry into the distribution center business began 30 years ago with a 60,000 sq. ft. distribution center. Over the next 25 years it grew to 140,000 as growth demanded. Five years ago we moved to our new 408,000 sq. ft. distribution

38

Years

center to better serve our customers’ demand. In our search for a new site, one of our

Jerry Fortier, General Manager

prime concerns was to find a place that was close to the old location so we would not lose any of our work force. Today, five years later, 40% of our employees have been with us for over 10 years. For us, experience is truly the

24

6

Years

key to our distribution center business.

Years

Howard Moore, Fleet Manager

Jeff Goddard, Operations Manager

2

Years

15

3

Years

Years

4

3

Years Years Selectors: Christopher Buckham (l), Freeman Sands (c), Phil Francoeur (r)

Steve Porter, Shipping Supervisor

2

5

8

Years

Mike Barley, Receiver.

21

Years

Years Moises Desouza, Selector (l) and Cindy Hull, Quality Control (r).

3

Years

Tina Clermont, Receiving Clerk.

14

Years

AJ Wagner, Selector (l) and Neal West, Second Shift Floor Manager (r).

Ino Bueno, Receiver.

10

10

Years

Years

11

Years

Ron Bellemore, Receiver/Safety Director.

5

21

Years

Dave Perez, Receiving Supervisor (l), Rick Levesque,Warehouse Manager (r)

2

Years

Years

Gus Rodriguez, Split Crew Receiver

Inventory Control: Dave Rondeau (l) and Ed Chuba (r).

Years

5

Years Eduardo Roque, Front Dock Receiving

The fuel tank holds 12,000 gallons of fuel for the 17 truck fleet.

4

F.W. WEBB COMPANY

www.fwwebb.com

Pipe & Tubing • Carbon • Stainless

• Aluminum • Copper

 Stainless Steel Pipe

• Cast Iron • Brass

• Plastic • Fiberglass/Epoxy

 Steel Pipe & Fabrication

304/L & 316/L Stainless, Schedules 5, 10, 40, 80 • 1” – 36” • Flange, bell, roll groove and configurations • Stock sizes in 20’ lengths • Special lengths available

Wheatland • US Steel • Sharon Tube Charlotte • Cerro F.W. Webb Company has the largest pipe inventory in the Northeast.

Our fabrication shop is capable of cutting, threading, and grooving through 12” pipe. When you call F.W. Webb, a professional inside sales force will handle your orders and questions. We can fabricate for immediate delivery and have 1/8” – 24” pipe in stock.

Continuous Production • 2”– 8” in schedules 5, 10, 20, and 40, Lengths up to 60’

Batch Production • 10”– 60” in schedules 5, 10, 20, 40, and 80, lengths up to 48’

All Sizes and Schedules 1/8” − 24” In Stock

 Soil Pipe

 CERRO Copper

Our Pipe Depot Stocks...

Copper Tubing/Coils / Carbon Steel Pipe

• Domestic A53 CW, ½” – 4” Sch n end, 1/8” – 4” in black T&C, ½” – 4” in Galvanized T&C ½” – 4” in Sch 80 in black plain end, 2½” – 4” in Sch 40 groove x groove • Domestic A53 ERW, 2½” – 30” Sch 40 & standard sizes • Domestic A53 ERW, 8” – 16” in light weight ranges • Domestic A53 ERW, 6” & 8” XH black plain end • Domestic A106 Seamless, ½” – 2” in Sch 40 & 80 • Imported A106 Seamless, ½” – 12” Sch 40 & 80

Stainless Steel • Domestic 2”– 12” Sch 10 304L – A312, 316L – A312, 304L – A778 (3”), 316L – A778 (3”, 10”, 12”) • Victaulic Sch 5 for Pressfit

Tubing/Coils

Cast Iron Soil Pipe & Fittings

Lengths & Coils Webb has inventory of over one-half million lbs. of copper tubing from ¼” to 6” in diameter.

PVF • Plumbing • Sprinkler • HVAC • 100 customer service persons • 200 delivery trucks • Dedicated account manager • $90,000,000 inventory • Product application specialists • 24-7-365 • Hard to find products • Professional submittals • 65+ branches

• Job usage reports • WebbConnect, On-Line access (www.fwwebb.com) • Expediting • On time . . . Accurate . . .

Complete Deliveries • More products & services less hassle • Project pricing

PVC/CPVC – HARVEL

Fall 2009

F.W. WEBB COMPANY

5

 ANSI class 150 flanged top entry ball valve

NOW!

Critical Service Valves • Sizes 1/2” to 10” • Temperature – 150°F to +1,000° F • ANSI Pressure Class 150, 300, 600 • Vacuum to 29” Hg • 16 seating materials, four different configurations • High-strength encapsulated metal seat holders Ideal for High Temperature, High Vacuum • Seven body materials and Intense In-Line Repair Demand • Nine ball and stem materials • Six end configurations 1/2” – 10” • Standard bonnets, extended bonnets and fugitive emission bonnets – all interchangeable • B16.34 Compliant

 Apollo® flanged Ball valves

High Performance Flanged Valves 87A/88A Series

Apollo flanged ball valves are available in CF8M Stainless Steel, WCB Carbon Steel and CN7M A20 alloy.

Flange Rating

Standard Port

Full Port

Carbon Steel

150#, 300#

88A-100, 88A-700

88A-200, 88A-900

Stainless Steel

150#, 300#

87A-100, 87A-700

87A-200, 87A-900

150#

87A-400

87A-500

Also available with trim options: • 316SS ball and stem • NiCu ball and stem • Hastelloy ball and stem

87A, 88A Extended Bonnet Works Best In Insulated Applications

 Apollo-press™ Choose the Forged Brass Valve from Apollo® that Installs − Securely − in Seconds Features: • Compatible with most crimping tool systems • 210°F maximum operating temperature • Press connections rating: 200 psig • Valve rating: 600 psig CWP • Forged brass construction • Adjustable stem packing • For water or air service • Blow-out proof stem • Full port design • Sizes ½” – 2”

77W

1/2” – 2”

Apollo Series 77W Apollo-Press ball valves feature end connections forged as an integral part of the valve body. You get a solid joint between pipe and valve in just seconds with no additional fittings, no solder, no flame.

The 77W features a blowout-proof stem, chrome plated solid brass ball for optimal flow and an adjustable stem picking nut.

Apollo-Press™ valves meet MSS SP-110 standards. They are UL-listed, FM certified and ANSI/NSF 61 approved.

Apollo-Press valves are available now in sizes from ½” to 2”.

Integral Crimp-Ready End Connections Offer Savings You Can Count On.

 Apollo® Class 600 Ball Valves 83B Carbon Steel and 86B Stainless Steel

NEW 4” Extended Bonnet

Unique Apollo® 4” stationary bonnet extensions are your perfect choice for valves in insulated service. Better than a stem extension, this gasketed, pressure-containing bonnet bolts directly to the ISO 5211 mounting pad. Because the extension is stationary, the valve can operate as designed — without tearing away insulation. The packing is moved above the insulation for ease of maintenance. A four-point ISO 5211 mounting pad is also included as the standard locking feature.

Available factory-installed or in kit form for retrofitting.

• B16.34 Compliant

6

100% American Made

on all “Made in the USA” products!

™

A351 CF8M – 87A Series A216 WCB – 88A Series 1/2” – 12” A351 CN7M – 87A-400 Series

– 87A-500 Series Apollo flanged valves are available in 150# flanged and 300# flanged floating designs. Are also available in standard as well as full-port configurations.

Alloy 20

5-YEAR WARRANTY

F.W. WEBB COMPANY

3/8” – 2”

Fully rated in every size: 3/8”, ½”, ¾”,1”,1¼”, 1½”, and 2”.

Also available in nickel and alloy bodies.

Gland plate adjustable without removing actuator.

• Three-piece full port enclosed stainless steel bolts • Swing-out center section • Pressure-balanced solid ball • Anti-blowout bottom entry stem design • Anti-static ground ball and stem • Lockable in open or closed position • Fully machined ISO 5211 mounting

• Cast bosses for bleed and drain ports • Vacuum service to 29 in of Hg • Meets NACE MR0175 (2000 edition) • Steam rated to 250 SWP • Adjustable multi piece “V” style packing • Unfilled FDA compliant, enhanced PTFE seats are standard • B16.34 Compliant

www.fwwebb.com

ITT Engineered Valves Delivering high quality, innovative flow control solutions for Abrasive Wear Resistance, Corrosion Resistance, and Critical/Hazardous Containment in a wide range of industries worldwide.

Cam-Tite® and Cam-Line® ball valves with H-Series Compact

actuators have been converted to C-Series Compact II actuators.

The Compact II is one of the most rugged actuators on the world market. Due to its ruggedness, Compact offers a seven year warranty on the actuator.

Advantages of the C-Series Compact actuators: • Powerful - Four pistons generate twice the torque of comparably sized two piston designs • Energy saver - Reduces the average air consumption by 50% due to compact physical size • Fastest - Has faster stroke due to shorter travel distance • Smallest and Lightest - Size is about 50% of a traditional 2 piston actuator with same torque value, due to the 4 piston design • Minimal easy maintenance • Less wear of moving parts (piston and o-rings) than any traditional 2 piston actuator due to the concentric pistons design • Safe springs configuration change with cover bolts long enough to release spring load before removing the cover • Easy spring configuration changes, due to concentric spring structure • Wide options of Fail/Safe combinations, particularly in low air operating pressure The H-Series actuator has been discontinued and ITT will no longer ship or quote the obsolete H-Series actuator.

If you have any questions, please contact your F.W. Webb Sales Representative.

NOW AVAILABLE – New Connection for Skotch® Trifecta T500 Oil Valves ITT is pleased to announce T500 Skotch oil valves are now available with ½” socket welded union end connections.

We have received numerous customer requests for socket welded union end connections, and have added this end connection to the Skotch product offering.

Now there is a quick disconnect option for the ½” oil valve .

The new socket weld union ends will allow users to easily disconnect Skotch valves for repair or maintenance. Presently, the new socket welded union ends are available only on the ½” size; however, other sizes are available on request.

Fall 2009

F.W. WEBB COMPANY

7

Valves

Valves

Guaranteed to leak. And that’s a good thing.

Only Viega ProPress fittings and valves offer the patented Smart Connect feature, a quick and easy way to identify connections that need pressing.

During pressure testing, water flows past the sealing element indicating an unpressed fitting. Since 2005, Viega’s Smart Connect feature has assured hundreds of millions of leak-free connections for water and gas applications throughout the world.

Discover the difference Viega quality makes on your next project.

Formore more information, information contact at For please us contact 1-800-976-9817. your local F.W. Webb sales representative.

Smart Connect 6.875 x 4.5.bw.indd 1

Viega ProPress® with patented Smart Connect® feature

9/9/09 10:26:59 AM

To avoid the AFTER WHAT – switch to Flexitallic.

Gasket failures can lead to system downtime and serious environmental impact. As the industry leader, Flexitallic Spiral Wound Gaskets are consistently manufactured to exacting engineering standards.

They’ll stand up to the toughest temperature and pressure conditions, they’re resistant to virtually all corrosive and toxic media, and you get the same high quality gasket on time, every time.

Gasket specifications should be reviewed and updated every 2 years. Call F.W. Webb today for a gasket consultation to make sure you are specifying the most reliable gaskets.

8

F.W. WEBB COMPANY

www.fwwebb.com

Valves Crane and F.W.Webb Company provide valves that have stood the test of time.

Whether it’s Bronze Valves, Iron Valves, Cast Steel, or Butterfly Valves, you can rely on the most experienced team in the Northeast to make your valve selection easy.

 Bronze Valves

 Cast Steel Valves

Gate • Globe • Angle • Check

Gate • Globe • Check

• Class 125 – 300 • Flanged, Threaded, & Solder Ends • Screwed & Union Bonnet • MSS-SP-80 • Commercial & Industrial Grade • Rising & Non-Rising Stem • ASTM B61 or B62 Body • Stainless Steel, Bronze, or Teflon Disc • UL/ULC/FM listed valves

• Class 150 – 600 • Sizes 2” – 24” • Flanged and Butt-Weld Ends • Bolted Bonnet • Swing, Tilting Disc and Stop Check • NACE & Special Trims (i.e., 316 SS, Bronze, Monel) • API 600

¼” - 3”

 Stainless steel valves

• Class 150 – 600 • Threaded, Socket-Weld, & Flanged Ends • Bolted & Screwed Bonnets 316 SS, 316L SS & Alloy 20 Material Standard • Special Materials (Hastelloy C, Monel, 304 SS, & more) • API 603, MSS-SP-42

Over 150 years of experience and reliability you can count on at every turn.

2” - 24”

 center line

 FLOWSEAL

Resilient Seated Butterfly Valves

High Performance Butterfly Valves

• Rated to 200 & 285 PSI shut-off • Wafer and lug body style • Series 200 Cast or Ductile Iron • Series 225 – 285 PSI shut-off • Series 250 – Carbon or Stainless Steel • Series 300 – Direct Drive • Series 800 fully elastomerlined check • Automated valves: pneumatic, electric, hydraulic Center Line Valves are well-suited for low pressure applications, providing dependable service for air and water in snowmaking pipelines.These valves are easily replaced in the field.

• ASME Class 150, 300 and 600 • Wafer and Lug body style • Soft seated; zero leakage • Metal seated; ASME Class IV leakage • Fire safe; meets API 607, Rev. 4 • MSS-SP-68 • Automated valves: pneumatic, electric, hydraulic • Lug body valves suitable for Duo-Chek® dead-end service in either direction High Performance Check Valves The patented Flowseal soft-seat • Class 125 – 2500 design provides bubble-tight shutoff and provides unparalleled • Lug, wafer, double flanged, service in vacuum- to low-pressure and extended body style ASME Pressure Classes 150, 300 and • End connections: Raised 600 applications. face, Plain face, Ring joint, Weld end, Hub end, Flange connections • Resilient and metal seal materials • API-594 • Cast Iron, Ductile Iron, WCB 2” - 48” Cast Steel, 316 SS, all alloys Provide superior backflow and water hammer protection for pumps in snowmaking systems.

2” - 48”



2” - 72”

Fall 2009

F.W. WEBB COMPANY

9

Valves

DSV Sanitary Check Valve The DSV Sanitary Check Valve is used to stop toxic gas back flow, drain CIP fluids, and prevent cross process contaminations.

Use the DSV with weep holes in parallel pump discharge to keep your process temperature constant. 1/2” to 3”, vertical or horizontal styles, 3A rated. Ask your Webb representative for the DSV.

ASCO® 8262/8263 Series two-way direct acting solenoid valves The 8262/8263 Series two-way direct acting solenoid valves now have increased AC and DC pressure ratings and real-time online configuration and ordering. The valves are ideal for applications in industrial and agricultural machinery, food products machinery, laundry and dishwashing appliances, and medical and analytical instruments. The 8262/8263 Series valves are available in normally-closed, brass and stainless steel constructions.

They can be used to control the flow of air, water, and light oil and are available in 1/8-inch, ¼-inch, and 3/8inch pipe sizes.

The online configuration tool allows a customer to quickly build a valve to meet a set of specific requirements.

It then displays the list price, availability, 3D CAD drawings, and specifications for the configured product. The configurator generates an order code for the valve that permits an immediate online purchase, plus greatly simplifies the reordering process. Most of the 8262/8263 Series valves are available through the ASCO Today sameday shipping program. To download the 8262 catalog, features and benefits sheet, and design a valve, visit ascovalve.com/8262configurator.

Please contact your local F.W. Webb representative for more information.

Ask your F.W. Webb Representative for more information.

10

F.W. WEBB COMPANY

www.fwwebb.com

Hose Contact Peter Marshall, Gary Rose or Mike Costa: 800.795.6390

Peter Marshall

The heating oil season is now upon us, and it’s time for fuel dealers to do the periodic maintenance to the fuel delivery equipment to make the upcoming season accident- and trouble-free. Gates Rubbers new completely redesigned fuel oil delivery hose can help. The new design incorporates and extremely abrasion-resistant carboxylated Nitrile cover and an RMA Class A Nitrile tube to make a flexible and durable long lasting cost-effective hose assembly.

F.W. Webb’s Hose Division can make custom hose assemblies specific to the customers’ needs.

CALL Peter Marshall or Gary Rose at 401.463.4108 for more information and assistance..

F.W. Webb stocks the complete line of Gates industrial and hydraulic hose. We also handle the entire line of Reelcraft hose reels, for anything from potable water washdown, pressure washer, and low to high pressure air, water, and oil applications.

Take 5 toGet 5!

Take 5 minutes to consider us on your next expansion joint order & get 5% off!

• Guaranteed 24 hour response to your quote request • Large inventory for immediate shipment!

Please reference promo code FW0609

Fall 2009

F.W. WEBB COMPANY

11

Pipe Fittings/Webb Piping Solutions Gary Rose General Manager Piping Products

Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

LINE CARD www.fwwebb.com

Innovative Process Solutions F.W. Webb Company uses only Resistoflex-lined pipe and fittings and is the only factory-authorized distributor in the Northeast. Our Conrac machine allows us to fabricate custom spool pieces for Resistoflex piping systems up to 8” diameter. Our factory-trained personnel located at our Cranston, Rhode Island facility are here to serve you with their many years of experience and knowledge of lined piping systems.

F.W. Webb is the exclusive, stocking distributor of Resistoflex. We have the inventory and personnel dedicated to serve you for all lined product requirements.

Piping Systems for: • Compressed air • Inert gases • Vacuum • OEM machines

• Industrial & commercial wash down equipment • Drain valves • Sampling valves • Line blind valves

• • • • • •

Plastic–lined products Butterfly valves Ball valves Check valves Strainers Relief valves

• Quality fluid & gas transfer • Pipe connectors in Stainless Steel and Carbon steel

• Double ferrule CBC lock fittings • Ball valves • Needle valves • Manifolds

• Industrial hose • Acid chemical, air & multipurpose, petroleum transfer, food & beverage, material handling • Water and steam hoses

CRANE RESISTOFLEX and CRANE XOMOX: you’re single source for youR most difficult corrosion applications

• Polypropylene, Teflon, Kynar, and PFA Lined products • Diaphragm valves • Check valves • Clamp valves • Hose • Expansion joints

12

• • • • • • • •

F.W. WEBB COMPANY

PFA Lined products Swing check valves Ball check valves Piston check valves Sight flow indicators Strainers Poppet check valves Clamp valves

F.W. Webb Company 3 Slater Road Cranston, RI 02920 Ph: 401.739.0180 Toll Free: 866.850.7867 Fax: 401.463.6056 www.fwwebb.com

Customers are always looking for cost effective solutions to difficult Text here piping and hose problems. F.W. Webb and the Webb Piping Products Division are committed to finding customer solutions. New and innovative products like Legris and Lok Ring help customers cut installation time and cost with unique installation protocol.

Crane Resistoflex and Xomox offer cost-effective alternatives to exotic alloys in chemical process piping. Also call us for Strahman Gary Gary Rose Rose General General Manager Manager and Gates Rubber— two names you can trust to handle wash Piping Piping Products Products down, hydraulic and industrial hose requirements.

Specialty Pipe Fittings/Webb Process Piping and Piping Hose Solutions Solutions Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

Crane Resistoflex and Crane Xomox: You’re Single Source for Your Most Difficult Corrosion Applications.

 xomox® tufline fully lined plug valves

• These valves are more versatile, and often out-perform alloy valves.

• More economical than alloy valves.

• With FEP and PFA lining, cast, dovetail recesses and machined grooves lock the lining to the valve body casting. The locked-in lining is virtually impervious to shrinking, stress-cracking, collapse, or blowout.

• Unlike alloy valves, there is no need to inventory different valves for various applications.

• There is less chance of costly and dangerous installation errors.

• Media contamination is prevented.

• Positive shutoff.

• FEP and PFA locked-in lining.

2-way fully lined plug valves 3-way fully lined plug valves

Xomox® valves are lined with DuPont™ Teflon® fluoropolymer.

 xomox® tufline fully lined Ball valves

• Tufline Lined Ball valves have a metal-tometal body joint to control compression of the liner for assured sealing.

• The seats are easily and quickly replaced.

Standard port lined ball valves

Full port lined ball valves

fully lined accessories

Tufline Fully Lined Accessories are a reliable and economical alternative to costly highalloy products.

• Wafer Swing Check Valves • Ball Check Valves • Piston Check Valves • Sight Flow Indicators • Strainers • Tank Bottom Valves • Poppet Check Valves • Clamp Valves

 xomox® tufline fully lined butterfly valves

• Lower torque ratings.

• Continuous disc/shaft lining.

• Triple O-ring stem sealing components are all isolated from corrosive flow media.

• Spring washer live loaded stem packing.

• Slim profile disc.

• Completely enclosed shaft bottom. No springs, seals, or

washers to corrode or fail.

• Face-to-face dimensions meet API 609 specifications.

PFA lining: • More flexible and less bulky for more reliable and tighter sealing.

• Excellent permeation resistance.

• High Cv values.

The Cost–Effective Way to Fight Crane Resistoflex / Crane Xomox now give F.W. Webb the capability of offering the complete Crane package for corrosion–resistant plastic–lined pipe, fittings, and valves. The economical alternative that combines the mechanical strength of steel with the chemical resistance of an engineered plastic. Why live with the constant maintenance and replacement of inexpensive materials or the outrageous price for alloy piping?

Fall 2009

 xomox® tufline

Corrosion

F.W. Webb Company uses only Resistoflex–lined pipe and fittings and are the only factor y–authorized distributor in the Northeast.

Our Conrac Machine allows us to fabricate custom spool pieces for Resistoflex piping systems up to 8” diameter. Our factor y– trained personnel located at our Cranston, RI facility are here to serve you with years of experience and are knowledgeable in lined piping systems.Webb is the only exclusive authorized stocking distributor with the inventor y and personnel dedicated to serve you for all lined product requirements.

F.W. WEBB COMPANY

13

Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

IN STOCK in CRANSTON and ALBANY!

Strahman offers a full line of mixing units, hose stations, hoses, nozzles and wash down accessories.

Our wash down line is designed for industrial use and is used in a wide variety of industries including food, beverage, pharmaceutical, chemical and other applications.

M5000 Steam & Cold Water

M5000-TS

M159 Hot & Cold Water

Strahman Quality Hose Assemblies

M-Series Spray Nozzles

M5000 Steam & Cold Water Pedestal Series

14

F.W. WEBB COMPANY

www.fwwebb.com

Fire Protection Contact Bob Schuler or Mac McNulty 800.624.6647

Mac McNulty

LINE CARD www.fwwebb.com

Victaulic

Tools

• Firelock Grooved Couplings & Fittings • ULFM Valves • Riser Manifolds • CPVC Plastic Pipe, Spears Flameguard CPVC Fittings • Sprinkler Heads and Devices • Fire-Pac • Pressfit • Dropmaster

• Lenox Hole Saws and Sawzall/Hacksaw Blades • Ridgid • Milwaukee • Triple R Specialty • Victaulic

Steel Pipe • Schedule 40 A53CW – A53 ERW – Al35 • Schedule 10 Al35/A795 1¼” – 8” • Wheatland • Allied Tube and Conduit • US Steel

ULFM Valve Products • • • • •

Nibco ULFM Gates Nibco ULFM Post Indicators Nibco ULFM Checks Test and Drain Valves Ames/Watts Backflow Products

Hangers • • • • •

Erico Tolco Earthquake Bracing Unistrut Sammy Super Screws PHD Ballard Clamps

Electrical Products ❙ • Potter Electric Signal Co. ❙ • General Air Products (Compressors)

Miscellaneous ❙ • ❙ • ❙ • ❙ • ❙ • ❙ • ❙ •

FPPI Products Pipe Joint Compound Antifreeze Firestopping Cutting Oils Teflon Tape Wilkens Valve Products

Fabrication • • • • •

Threading Capabilities through 8” Grooving Capabilities through 24” Welding Bundling Color Coding

Superior Service • Rack trucks with “Piggy Back” fork trucks • Complete Fire Protection Inventories • Fast, Quality Fabrication

F.W. Webb Company 152 Will Drive Canton, MA 02021 TEL: 781.828.5559 800.624.6647 FAX: 781.828.8060

Fall 2009

F.W. WEBB COMPANY

15

Cranston, Cranston,RI:RI:866-850-7867 866-850-7867 Winslow, Winslow,ME: ME:800-452-1928 800-452-1928 Syracuse, Syracuse,NY: NY:866-850-7867 866-850-7867

Pump Sales • Service • Repair

Pump Salesin•Fluid Service • Repair Specialists Handling

16

F.W. WEBB COMPANY

JimJim Bodle Bodle General Manager General Manager

Copy hereEr sum ip et, quipit am adigna augait iliquat ueraesed te modolortio corper sequat.

Ore volor sim deliqui smolorpero od min henim dolorem iureet, velit ip ea aut praessit autat utat volor sumsandre moloreet ad ting exero commod tat. Rud tat, veliquisl utpat, suscinci bla conulla am vullaore www.webbpump.com modigna aliquat. Accum nonseq

LINE CARD LINE CARD

www.fwwebb.com

800.452.1928 207.873.7741

Process Control / Control Valves / Instrumentation & Accessories

Daryl Schoellkopf General Manager

LINE CARD

Masoneilan®

Level, Flow, Temperature, Pressure, Recorders, Liquid Flow: Electromagnetic, Coriolis,Vortex, Ultrasonic-Differential Level: Radar, Ultrasonic, Capacitance, Pressure: Absolute, Gauge, Differential, Temperature: RTD, Thermocouple Analytical: pH/ORP, Conductivity, TOC, Turbidity Web Asset Management

Threaded and Flanged Ball Valves, Top Entry Ball Valves, Pneumatic and Electric Actuators, Limit Switches and Accessories

Rotary Motion Control Valves (Camflex®, Varimax®, Paramax®) Linear Motion Globe and Angle Control Valves (Cage, Top and Stem Guided, 2-way and 3-way) Process Control and Measurement Instrumentation Smart Technology Digital Valve Positioners and Process Controllers Engineered and Special Application Control Valve (Lincoln Log®) Masoneilan Authorized Repair Center (MARC®)

Blade, Shear, and Microwave Consistency Transmitters, Sample Valves and Web Break Detection Systems

www.kentrol.com

Plug, Ball & Butterfly Valves

Scott Varney sva@fwwebb.com

Three-Way and Four-Way Solenoid Valves, Valve Monitoring Systems Diaphragm Seals, Digital Pressure Gauges, Pressure and Temperature Switches, Dead Weight Testers, Calibrators, Transmitters

Industrial Flow, Nutating Disc, Turbine and Magnetic Flow Meters

Engineered Valves: Dia Flo – Diaphragm Valves; Fabri - Knife Gate Valves; Skotch Trifecta – Oil and Gas Burner ; Shut Off Valves

Chad Collier chc@fwwebb.com

Fieldconnex Bus Solutions, Purge Control Systems, Enclosed Protection Systems, IS Barriers Pneumatic, Electro-Pneumatic and Digital Positioners

Parrish Lovell par@fwwebb.com

Lighting, Cameras, Fused Sight Glass, Quick Opening Closures, Glass to Metal Seals

Instrument Class Signal Conditioning & Data Communications

Transmitter Manifolds (2, 3, 5,Valves), Needle Gauge Valves, Airheaders, Differential Pressure Gauges

PID Loop Tuning, Analysis and Simulation Software

Quarter-Turn, Linear, Spring Return Electric Actuators

Pneumatic: Transducers (I/P, P/I), Regulators, Booster, Manual Load Stations and Computing Relays

Process Equipment: Desuperheaters, Scrubbers, Jet Ejectors, Mixers, Sparger Nozzles

High Performance Butterfly Valves,Actuators and Accessories

Aquarian Water Level Measurement

Corrosion and Wear Resistant Ceramic Control and Ball Valves

Fall 2009

Nate Grady nate@fwwebb.com

Dan Desilits ddd@fwwebb.com

Electric and Pneumatic Globe Control Valves, Flow Meters, Boiler and Level Controls

Valve Communication Systems, Limit Switch Packages

Cynthia Berkovsky ceb@fwwebb.com

For more information, call:

800.452.1928

207.873.7741

Triple Offset, Metal Seated, Extended Duty Butterfly Valves

F.W. WEBB COMPANY

17

LINE CARD

800.452.1928 207.873.7741

Sevco Certified Pressure Relief Valve Service

Daryl Schoellkopf General Manager

• Pressure Relief Valves for Steam and Gas Services • Factory Authorized Assembler for Series 19 Bronze, Series 119 Cast Iron and Series 500 Pressure Relief Valve • Stocking Series 12, 14 and 15 Series Relief Valves for Low Pressure Boiler and Air Systems

• • • •

Cast Iron Heat Transfer Surfaces Horizontal and Vertical Discharge Unit Heaters Blast Coils Air Makeup Units

• Condensate Recovery Systems, Steam Traps, Condensate Pumps, Pressure and Temperature Regulators Services

sevco.fwwebb.com

•

• •

Pressure Relief Valves for Steam, Gas and Liquid Services; Factory Authorized Assembler Isoflex Section 1 Safety Valves Style JOS, JBS and JLT Pressure Relief Valves to Handle all Section VIII Requirements • Style JQ Sealed Valves for the Transportation and Storage of Chlorine • Omni-Trim Pressure Relief Valves

• Overpressure Protection Products • Rupture Disks • Explosion Vents Energy Conservation

• Authorized Crosby Valve “Pressure Management Center” • Sevco’s “4 Phase Steam Program” • Holder of Certificates of Authorization for the use of “V”, • Internet Based SEVCO Computerized Valve Survey “UV”, and “VR” symbol stamps System (SCVSS) • Factory trained and certified field and shop technicians • Steam Trap, Unit Heater and System Surveys • State-of-the-art steam test facility to 1500 psi • Liquid test facility to 3100 psi Engineered Systems • Air test facility to 3100 psi • Automated and Continuous Blowdown Systems • Electronic testing of safety valves, in line and under pressure • Burner Management Systems • Hydraulic Lift Assist devices for testing safety valves in line at • Desuperheating & Steam Conditioning Systems reduced pressure • Boiler Controls • Lapmaster facilities to ensure mirror-finish on valve seats, rotary • Condensate Recovery Systems joints, and custom machining • Relay Protection Panels • In-plant valve surveys and preventative maintenance programs • Skid Systems • Silencers for Vents, Control Valves and Pressure Relief Valves

After hours Emergency Service: 207.872.4779

Cord Collier col@fwwebb.com

18

F.W. WEBB COMPANY

Gary Thibodeau ggt@fwwebb.com

Call Cord or Gary with your questions.

www.fwwebb.com

LINE CARD

800.343.7555

www.uscosupply.com

Specialists in Thermoplastic Piping Systems

John Romano Vice President, Industrial Plastics

Flow meters/Controls Blue-White • +GF+ Georg Fischer Signet • Ashcroft • GPI

Inline / Paddle Wheel / Turbine / UltraSonic

valves Asahi/America • Hayward • +GF+ Georg Fischer • Spears • Plastomatic SMC • Xomox

Ball / Ball Check / Butterfly / Relief / Regulators / Lab / Degassing / Automation

pumps Blue-White • LMI • Versa-Matic • Hayward • Finish Thompson • Rule • Little Giant

Injection / Diaphragm / Peristaltic / Magnetic / Sump / Drum

gauges Plastomatic • Ashcroft

Liquid-filled / Industrial / Commercial / Guards

filters/strainers Hayward • Asahi/America • Harmsco • Banjo

Basket / Sediment / Bags / Elements

tanks Assman • St. Gobain • Chemtainer • Snyder Tank

Vertical / Horizontal / Bulk Storage / Containment / Fabrication / Tank Stands

mixers Neptune • Finish Thompson

Lab / Industrial / Drum

level controls STI • Flowline • Compac

Industrial Outside Sales Team

Single Point / Continuous / Controls / Ultrasonic

pipe/fittings Harvel • Charlotte • Spears • Asahi/America • Chemtrol • Zurn • Resistoflex Ameron • Banjo • +GF+ Cool-Fit

PVC-80 / CPVC-80 / Polypropylene / PVDF / HDPE / Acid Waste / High Purity Fusion Equipment Program / Double Containment / FRP / Lined Steel / ABS

tubing/hose Parker-Hannifin • Zeus • St. Gobain • Resistoflex • Gates

Stephen McGlynn sfm@fwwebb.com

Jim Matthews sls248@fwwebb.com

Industrial Inside Sales Team

HDPE / Polypropylene / Teflon® / Tygon / Reinforced / PVC

blowers/duct St. Gobain • Harvel • Spears

PVC/CPVC / Duct / Fittings / Industrial Blowers / Fabrication

tools

Dave McGlynn dmg@fwwebb.com

Reed • Craftsman • Laramy • Asahi/America

Plastic Cutters / Welders / Beveling / Manual and Automated Fusion Equipment

Accessories Banjo • IPS • Hercules (PVC/CPVC Solvent Cements) • Clic

Solvent Cements / Primers / Hangers / Applicators Fall 2009

Bill Jangro wjj@fwwebb.com

Ian Power ian@fwwebb.com

F.W. WEBB COMPANY

19

Utilities Supply Company

Specialists in Thermoplastic Piping Systems

Contact Dave McGlynn or Ian Power • 800.343.7555

Save time and money while increasing the life of your chilled water piping systems with +GF+ Georg Fischer’s Cool-Fit pre-insulated ABS piping system!

The OLD Way...

• High Installation Costs • Quick Rusting • Time Consuming

• No sweating!

• No extra labor insulating pipe and fittings!

• Incredibly energy efficient!

COOL-FIT® ABS Plus Systems, • No Welding - Tangit cement • Time - 3 Products in 1 Low weight: easy & speedy handling • Quality - No corrosion Quality insulation

The NEW Way! www.cool-fit.georgfischer.com

For more information ,please contact your local F.W. Webb Sales Representative.

GF Piping Systems

2882 Dow Avenue, Tustin, CA 92780-7258 • Phone (714) 731-8800, Toll Free (800) 854-4090 e-mail: us.ps@georgfischer.com • www.gfpiping.com

20

F.W. WEBB COMPANY

www.fwwebb.com

Specialists in BioProcessing Components 877.932.2246• 401.463.4176 • FAX: 401.463.4160 Contact Jim Bodle • www.webbbiopharm.com

Jim Bodle General Manager

LINE CARD webbbiopharm.com

biotechnology • pharmaceutical • life sciences

Fall 2009

F.W. WEBB COMPANY

21

800.253.7838 781.933.1804 Fax: 781.933.3528

Heating, Ventilation and Air Conditioning

John Thomas Vice President HVAC/R & Controls

LINE CARD www.fwwebb.com

COMMERCIAL Controls ● Direct Digital Controls York* Honeywell Johnson Controls Zonex ●

Electric

●

Electronic

●

Pneumatic

Honeywell Johnson Controls Siebe – Barber Colman Siemens – Landis, Powers Zonex York* Arzel Honeywell Johnson Controls Siebe– Barber Colman Zonex Honeywell Johnson Controls Siebe– Barber Colman Siemens – Landis, Powers

Heating, Air Conditioning & Ventilation Equipment ●

York*

●

●

Air Handlers

Air Handlers Coils Condensing Units Economisers Indoor Air Quality Roof Top Units York* Daikin* Air Fan (custom) Cambridgeport (custom) Chandler (built-up) Comfortmaker First Company Magicaire

Chillers York* Daikin* Waterfurnace (water/water)

● Coils York* Comfortmaker Chandler (Heatcraft) Precision Coils (built to spec)

22

● Condensing Units York* Daikin* Chandler (Heatcraft) Comfortmaker ● Curbs Adaptor Siesmic Vibration ●

Duct Heaters

●

Economisers

●

Energy Recovery Ventilators

Modine (gas, hot water) Q-Mark (electric) Sterling (gas, hot water) Warren Electric (electric) ;

York* Cambridgeport Air Systems Comfortmaker Micrometl York* Carnes Fantech Lifebreath Micrometl

● Exhaust Fans Carnes ● Geothermal Heat Pumps Water Furnace International ●

Make Up Air Units

Air Fan Applied Air Industrial Air Systems Modine Sterling

● Packaged Terminal AC & HP York* McQuay ●Registers, Grills, Diffusers Carnes Hart & Cooley Lima ●

●

Rooftop Units

York* Air Fan (custom) Comfortmaker Nesbitt (vav, multizone)

Self-Contained Packaged Units York* Bard Skymark International

F.W. WEBB COMPANY

● Unit Heaters Modine Sterling ● Water Cooled Modular Chiller Water Furnace International ● Water Source Heat Pumps Water Furnace International Compressors ● Hermetic Bristol Carlyle Copeland Tecumseh ●

Semihermetic (stock to 100 HP) York* Carrier Carlyle Copeland Dunham Bush Trane Worthington

O.E.M. HVAC Parts York* American Air Filters Climate Control Climate Master Herman Nelson McQuay Nesbitt Remington Singer Source 1 Sporlan Also Available Air Doors Boilers Cooling Towers Ductless Splits Fluid Coolers Full Inventory of HVAC and Control Parts/Accessories Hanging Stock Humidification/ Dehumidification Systems Hydronic Specialties Pumps Vibration Isolation

*F.W. Webb is the exclusive distributor of York products and Daikin products for New England and Upper New York.

www.fwwebb.com

energy saving commercial equipment

800.253.7838 781.933.1804 Fax: 781.933.3528

 Millennium Split System 2 and 4 Pipe

 Large Commercial Rooftops (Y)

All models include the Simplicity controls system, engineered for ease of set up and programming, to provide alarm monitoring. Free local networking carries all alarm and diagnostic data directly to an on-site PC. When available,York Wireless data can be transmitted virtually anywhere.

These units are completely assembled, piped and wired at the factory to provide one-piece shipment and rigging. Each unit is pressurized with a holding charge of refrigerant-22 for storage and/or shipping.

The compact design, clean styling, low silhouette, and quiet operation make these condensing units suitable for almost any outdoor location.

• Meets or exceeds Ashrae 90.1-1999 standards • Simplicity Controls • Inherently protect condenser fan motors • V-Coil Design with exterior service port connections • Five-minute anti-short cycle timer and minimum compressor run time • Standard operation to 40 F. Field-installed Low Ambient VFD Control to 0ºF • Factory installed disconnect and Technicoat coils option • Scroll compressors provide both high efficiency and reliability • Condenser coils are constructed of copper tubes and aluminum fins for durability and long lasting efficient operation • Crankcase heaters that will be de-energized when the compressor is operating • Self contained high and low pressure controls • Solid state or internal line break compressor motor protection • Class 2, 24-volt thermostat control circuit

York Millennium® Rooftops offer the flexibility to meet the requirements of a wide range of installations.They’re built to last and priced to compete.

Numerous options can be added to the base unit to satisfy almost any specifications —from the simple to complex. Units are offered in the following combinations: • Cooling Only • Cooling/Gas Heating (Natural Gas or Propane) • Cooling/Electric Heat • Cooling/Hot Water Heat • Cooling/Steam Heat In addition, these units are designed with the flexibility to support the industry’s best practices for indoor air quality.All these features are available on 25, 30- and 40-ton single-package units that are easy to install, use, and maintain. Factory-installed options, such as economizers, power exhaust, high-efficiency motors or filtration, barometric damper relief, 0° low ambient, high-capacity evaporator coils, and single-unit disconnect, add to the versatility of these selfcontained rooftops.

• Double-wall construction with galvanized sheet metal liner to protect against microbial growth.

• Rigid sheet metal inner liner to keep insulation out of the airstream.

• Sloped drain pan protects against pan corrosion and bacterial growth.

• Pitched roof design for natural drainage.

• Scroll compressors for efficiency and durability. Multiple refrigeration circuits for greater turndown and the best unloading capabilities in the industry. connection for BAS compatibility.

• Extended flue connection on gas units to eliminate the possibility of corrosion in the furnace heat exchanger.

• Constant air volume or Variable air volume by inlet guide vanes or variable frequency drive.

• Full range of airflows and static pressures to meet most every application requirement.

Condensers 15 to 50 Ton

25, 30 and 40 Ton

F.W. Webb is the exclusive distributor of York Heating and Cooling Systems and Source 1 Parts for New England and Upper New York.

 variable refrigerant volume (VRV) system

Optimized R410A Design

❶

❷ This industry benchmark is the world’s first R410A-operated ❸ variable refrigerant volume ❹ (VRV) system and represents a considerable advance in efficiency ❺ over competitive systems. ❶ Aero Fitting Grille and Aero Spiral Fan ❷ DC Fab Motor Optimized R410A design: ❸ Sine Wave DC Converter Daiken sets the industry standard ❹ E-Pass Heat Exchanger ❺ Reluctance Brushless DC Compressor The motor comprises powerful neodymium magnets that generate the reluctance torque. These magnets are approximately 12 times stronger than ferrite magnets and contribute to its substantial energy-saving performance.

➊ ➋ ➌ ➍ ➎

Fall 2009

F.W. WEBB TO DISTRIBUTE ACADIA HEATING AND COOLING SYSTEM

Energy-minded homeowners and businesses in the Northeast now have easier access to the Acadia Combined Heating and Cooling System from Hallowell International with the new distribution partnership with F.W. Webb Company.

The Acadia is a revolutionary new green technology for heating and cooling a home, while at the same time helping consumers and businesses save money. Acadia outperforms conventional fossil-fuel-based heating systems such as oilpowered furnaces, the most common system in the Northeast, by up to 300%.

F.W. Webb has long been a partner with Hallowell International in the development of the Acadia, providing components to manufacture the system. The enriched partnership provides Hallowell with an expanded distribution network with increased training facilities and customer support through the 70+ F.W. Webb facilities across New England and Upstate New York.

The Acadia is a single system engineered to comfortably heat and cool homes no matter what the weather outside, and it is both economical and environmentally friendly.

The engineers at Hallowell International created the Acadia using revolutionary boosted compression technology, enabling this clean technology to run effectively and efficiently in temperatures as low as -30°F.

F.W. WEBB COMPANY

23

YORK AUTHORIZED FACTORY PARTS

24

F.W. WEBB COMPANY

800.253.7838 781.933.1804 Fax: 781.933.3528

www.fwwebb.com

Refrigeration 781.272.6600 • fax: 781.275.3354 Contact Harry See

Harry See Vice President Refrigeration

LINE CARD

REfrigeration & HVAC Parts Chemicals ● Detergents & Solvents

Virginia, Rectorseal, Nu-Calgon ● Oils

Virginia, Nu-Calgon, Source 1 ● Propylene Glycol

Hercules ● Solder & Fluxes

Harris, Highside ● Water Treatment

Virginia, Nu-Calgon Compressors ● Tecumseh, Bitzer, Bristol,

Embraco, Copeland Controls ● Belts

Mars ● Capacitors

Mars ● Contactors & Relays

Mars, Honeywell, Tecumseh ● Hard Start Kits

Supco, Mars ● Overload Protects

Mars, Tecumseh ● Phase & Voltage Protectors

ACT, ICM ● Temperature & Pressure

Ranco, Honeywell, Johnson,

Mars, ACT ● Timers

Paragon, Mars ● Time Delay Relays

Mars, Supco, Honeywell ● Thermostat Wire

Baron, Source 1 ● Transformer

Honeywell, Mars, Jard Equipment ● A/C Room Units

Comfort-Aire ● Air Doors

Mars, Virginia ● Condensing Units

Tecumseh, Heatcraft, Krack ● Evaporators

Chandler, Heatcraft, Krack ● Glass Door

Anthony, Style Line ● Ice Machines

Scotsman, Hoshizaki, Howe ● Strip Door

Curtron, Aleco ● Walk-In Boxes

Crown, Harford Fall 2009

Filters ● Air Cleaners

York, Trion (Airbear) ● Bag, Hepa, Pleated, Standard

Precisionaire ● Water & Ice Machine

Aqua Pure, Nu-Calgon, Virginia Gauges ● Meter Chargers

TIF, CPS, UEI ● Temperature, Thermo

Cooper, TIF, SUPCO, UEI ● Temperature Meters & Tester

Fluke, UEI, TIF, Amprobe,

CPS, Mastercool Hanging ● Superstrut

Nuts, Washer, Deep Strut,

Narrow Strut, Top Beam, Side

Beam, F & M Rings, Threaded

Rod, Brackets, etc.

Motors ● Fractional HP

Emerson, Fasco, General

Electric, Marathon, Magnatek Parts ● York, Source 1/Factory Authorized Parts ● Electric Condensate Drain Pans

Supco, Gem ● Filter Driers

Sporlan, Parker ● Refrigerator Hardware

Door Latches, Gaskets ● Sight Glass

Sporlan Pumps ● Condensate Ice Machine Pumps

Little Giant, Beckett, Hartel ● Oil

Ritchie, Virginia, Nu Calgon ● Vacuum Pumps

Ritchie, J/B, Robinair Refrigerants ● ALL Types & Sizes

Honeywell/Genetron ● Refrigerant Reclaim

Flourotech (Stinger), Promax,

Ritchie ● Reclaim Program

Tools ● Accessories Silicone, Sand Cloth, Duct Tape, Gloves, Glues, Wire Nuts, Leak Detector, Foam, Insulation Tape, Tubing Cutters, Flashlights ● Charging Hoses

J/B, Ritchie, Robinair ● Drill Bits, Hole Saw, Blades

Lenox ● Electric Drills

Milwaukee ● Hand Tools

Klein, Ridgid, Channel Lock,

Craftsman ● Manifolds–Refrig. Test

J/B, Ritchie, Robinair ● Pressure Washer

Maxi-vac ● Soldering Tools

Turbo Torch, Unweld ● Sprayers

Virginia, Nu-Calgon Tubing & Fittings ● Brass: J/B ● Compression: Anderson ● Copper: Mueller, Nibco ● Copper ACR Nitrogen: Mueller, Cerro ● Plastic: PVC, ABS ● Plastic Vinyl: J/B, DVT ● Solderless Fittings: Lokring Valves ● Ball Refrigeration

Superior, Henry, Mueller ● Charging

J/B, Ritchie, Source 1, CPS ● Float Compressor

AC&R ● Float Tower

Flippen ● Flow Regulating

Sporlan, Parker, Source 1 ● Gas Regulating

Honeywell, Johnson, Asco,

Robertshaw ● Pressure Regulating

Sporlan, Johnson, Parker ● Refrigeration Ball Valves

Mueller, Superior ● Solenoid – Refrigeration

Sporlan ● Thermostatic Expansion

Sporlan ● Water Regulating

Asco, Johnson ● Water Solenoids

Asco, Sporlan

F.W. WEBB COMPANY

25

Heating Parts & Equipment 781.272.6600 • fax: 781.275.3354 Contact Joe Ruggiero

Joe Ruggiero Product Manager Heating

LINE CARD

Heating Parts

}

White Grundfos Logo

Heating Equipment

C

O

R

P

O

R

A

T

I

O

N

HVAC Parts

26

F.W. WEBB COMPANY

www.fwwebb.com

Plumbing 781.272.6600 • fax: 781.275.3354 Contact Tim O’Connell

Tim O’Connell Product Manager Residential Plumbing

LINE CARD

Plumbing parts & equipment • Pumps & Water Systems Plumbing Equipment • AB & A • Acorn • Acryline Tubs • Alsons • Ancon • American Standard • Aqua Glass • Basco • Bertch Vanities • Bock Water Heaters • Bradford White • Bradley Wash Fountains • Brasscraft • Brasstech • Brizo • Charlotte PVC • Chicago Faucets • Church Seats • Conbraco • Cozy • Danze • Delta • Dormont • Elkay • Fiat • Fluidmaster • Flush Valves – Zurn, Sloan, Toto • Gamco Washroom Accessories • Gerber • Ginger Accessories • Grohe • Halsey Taylor • Insinkerator • Jacuzzi • Jado • Kinzee • Keeney • KWC

Heating Equipment • MAAX Aker • McGuire • Metpar • Moen • Newport Brass • Nibco • Oatey • Oliveri Sinks • Panasonic Bath Fans • Plumbtrim • Ponte Guilio • Porcher • Powers • Progressive Cabinetry • PurePro® • Ridgid ProPress • Rinnai • Robern Medicine Cabinets • Showhouse • Sloan • Speakman • Steamist • Stern Williams • Strasser Vanities • Swan • Swanstone • Symmons • Toto – Commercial / Residential • T & S Brass • Taco • Trac Pipe • Water Pik • Watts • Watts WaterPEX • Wilkins • Woodpro Vanities • Woodford • Zurn Acid Waste

• Airco • Buderus • Burnham • Peerless • Weil McLain • Munchkin • Petite Baseboard • Watts Radiant • Superstor • Teledyne Laars • TRIO by PurePro® • Amtrol • Daiken • Hi-V Air Conditioning • Quiet-One • Modine • Vaughn – Sepco • York Plumbing Parts • American Standard • Bradford White • Chicago Faucet • Delta • Eljer • Fluidmaster • Gerber • Grohe • Jones Stephens • Moen • Pasco • Radiator Specialty • Sioux Chief • Sloan • Symmons • Toto • Watts Backflow • Water Heater Parts

Pumps & Water Systems • American Granby • AMF Cuno • Amtrol • Boshart • Campbell • Charter Plastics • Extrol • Goulds • Hartel • Kalas • Liberty Pumps • Little Giant • McClean Water Conditioners • Parker Fittings • Pentek • PurePro® • Sta-Rite • WaterSoft • Well-X-Trol • Well Mate • Zoeller Tools & Safety • Craftsman • Lenox • Milwaukee

• Rayovac • Reed • Ridgid

Energy Solutions • Solar Energy Solutions • Geothermal Systems • Solid Fuel/Combination • High Efficiency Boilers • High Efficiency Gas Furnaces • Water Heating • Space Heating • Retrofit Solutions

C

o Fall 2009

O

R

P

O

R

A

T

I

O

N

®

F.W. WEBB COMPANY

27

Industrial Specialties  Check Valves

 Fabricated Strainers

Double Disc, Silent Wafe and Silent Globe Available in Cast Iron, Carbon and Stainless Steel Other sizes upon request.

Tee, Wye and Basket from 6” – 24” Carbon & Stainless

 forged steel fittings Phoenix *Capitol domestically manufacturers a full line of forged steel fittings and unions along with branch connections marketed under Trans-OCon. All Phoenix *Capitol products are produced to the latest ASME, ANSI and ASTM specifications and adhere to existing Approved Manufacturing Lists.

In Stock 2” – 12” Now stocking a wide range of sizes!

Steam Heat Exchange Solutions

For more information, please contact your local F.W. Webb sales representative.

28

F.W. WEBB COMPANY

www.fwwebb.com

Tools

 2-in-1 Close Quarters AUTOFEED™ Cutter The RIDGID Model 118 Close Quarters AUTOFEED™ Cutter can be enhanced with a ratchet handle that allows for easier cutting in tight, restricted spaces. It can be operated in ratchet steps as small as 10 degrees. This allows for fine indexing of the cutter to operate in tight spaces. The AUTOFEED Cutter is designed to cut hard and soft copper, aluminum and brass.

Features and benefits: • Can be used alone or with the ratchet handle, a light and ergonomic accessory to help use the cutter in tight and restricted spaces.

• Easy to use in hard-toreach areas because the knob only needs to be tightened once.

• The handle works in tights spaces that are too small to rotate the cutter by hand.

• Adjustable to any size from 1/4” – 1-1/8” OD. ®

laser temp gun™

2266-20 Surface Temperature Measurement from -20 to 932°F (-30 to 500°C) • 12:1 Distance to Spot Ratio.

Measures a one foot spot from 12 feet away • User Configurable Hi/Low Alarm Settings • K-type thermocouple input for contact temperature • 0.95 fixed emissivity

Shockwave™ drill and drive set

48-32-4401

• Heat treated geometric design provides the shock adsorption • Proprietary steel and heat treat process for maximum strength and durability • Forged tips for maximum grip

Fall 2009

 RP 210-B Press Tool

 Press Snap™ Soil Pipe Cutter

RIDGID® introduces the ultimate in press tool technology: the RP 210-B. For a fast and reliable way to join copper, stainless steel and PEX, the new RP 210-B has more capacity than any compact press tool on the market. This model is 2 inches shorter and 25% lighter than our previous compact tool and features the longest service interval available (32,000 cycles), an improved swiveling barrel, and a powerful 18V lithiumIon battery. Now you can do more with less!

Specifications: • Capacity: 1/2” – 1-1/4” (Copper & Stainless Steel), 3/8” - 1-1/2” (PEX) • 270° Barrel/Jaw Swivel • Battery: 18V Li-Ion 1.1Ah • Weight: 6.4 lbs. with Battery • Battery Charger: 115V • Hydraulic Ram Output: 5,400 lbs. (24kN) • Operating Temperature Range: 15°F to 122°F • Approximate Cycle Time: 5 seconds

The Press Snap™ Soil Pipe Cutter expands the capabilities of RIDGID® standard press tools by providing a fast and easy way to cut cast iron soil pipe. Without lengthy lever arms used by traditional soil pipe cutters, improved access is a snap.

The Press Snap cutter works with all RIDGID standard press tools (CT-400, 320-E, RP 330B and RP 330-C) to cut most 11/2” – 4” soil pipe in seconds. Simply connect the Press Snap cutter to a RIDGID press tool, wrap the chain around the pipe, and press. No manual ratcheting or additional tools are required. Cutting soil pipe has never been so easy!

Specifications: • Compatible with all RIDGID® Standard Press Tools • Cuts 11/2” to 4” No Hub & Service Weight Soil Pipe • No lengthy lever arms • Eliminates the need to score the pipe • Completes the cut in seconds • Standard Kit: Press Snap Cutter, Case and Operator’s Manual OD.

M12 SUB-SCANNER™ Detection Tool (2290-20) and Screwdriver (2401-20)

M12 3/8” Drill/ Driver (2410-20) and Radio (2590-20)

2290-23 The innovative M12™ cordless system is reaches the tightest and toughest places.

• Measures depth and location of rebar up to 6”through concrete; Scans through gypsum, OSB, ceramic tile, marble, and concrete; Detects location of wood, PEX, PVC, and metal • Differentiates between Steel (Ferrous) and Copper or Aluminum (NAn-Ferrous) metals • Embedded AC voltage detection to identify the location of live wires • 5-Year Warranty

M18 Hammer drill (2602-22) with M18 sawzall (2620-20)

2602-22P

• M18 Compact hammer drill provides 500 in/pds torque • Compact design 8½” length • Digital Power Management • All metal gear case; all metal ½” ratching chuck

2492-22 The M12™ cordless system offers unmatched power, speed,.

• The Cordless 3/8” drill driver delivers 250 in-lbs of torque in a compact design • The M12™ Radio is built with an exclusive digital processor which delivers highest reception accuracy and signal clarity.

Thunderbolt® Black Oxide drill bit set 48-89-2802 29pc Thunderbolt® Black Oxide Drill Bit Set comes with: 1/16” through 1/2” by 64ths • Thunderbolt® Web, Provides Longer Life and Faster Driller Times • Parabollic Flute, Clears Chips Faster • 135° degree Split Point, Precision Start No Walking • 3-Flat Secure Grip Shank, Reduces Bit Slipping in Chuck

F.W. WEBB COMPANY

29

Tools electric hydrostatic  Roll Groover test pumps

 mechanical hot

tapping machine

RGCOMBO2

EHTP500 and EHTP500C Features: • Pressure test water systems, in both residential and commercial buildings • Hose features a quick disconnect with built-in check valve • Smooth running, quiet motor EHTP500C

EHTP500

2-in-1 unit for power and manual roll grooves. Capacity of 1 1/4” – 6” for up to Sch. 40 steel, stainless steel and aluminum pipe. No groove roller or shaft changeout required.

Includes both straight and bent handle ratchet wrenches. Compact, portable design with built-in handle for improved mounting and transporting. All gears enclosed in the casting to minimize debris entering tool.

Consistent tracking makes this tool great to use time after time.

DM3MECH Hot tap using the DM3MECH mechanical drilling machine. With the right hole saw, cut or drill for up to 4” valves on copper, steel, or plastic pipe. Both DM3MECH and DM3MECHB come with a heavy-duty plastic, compartmental toolbox. DM3MECH contains the drilling machine, along with 7/16” Hex Arbor, 1/4” Drill Bit, seven Hole Saws, Allen wrench and toolbox. DM3MECHB is the drilling machine in a toolbox only without hole saws or arbor. These machines require a 1/2” drill motor, valves and fittings that are all sold separately.

Safety  Kwik Kit Safety Railing Kits

 Kee Lite Aluminum Fittings

• Strong and safe, exceeds OSHA and BOCA standards • Corrosion resistant fittings • Safety yellow powder coat for high visibility • Easy assembly using a standard hex key • Available in galvanized or aluminum • Ability to secure using bolts or chemical anchors • Standard 1½” pipe Kwik Kit Safety Railing Kits allow you to create a sturdy railing system with no welding or threading, while giving you the added visible advantage of yellow safety rails. These railing kit are very quick to assemble using only a standard hex key to tighten the large, easy to use set screws. Kwik Kit Safety Railing Kits are pre-packaged and provide 6-foot post spacing for straight sections, corner sections or extension sections. The rails may be cut where shorter sections are required. The kits may be secured using bolts or chemical anchors attached to the base fittings.

Fitting Function with Style Handrails / Lighting Grids / Store Fixtures / Playgrounds / Guardrails / Set Design & Props • Large set screws, easy installation & strong grip • Esthetic look and design • Light weight • Corrosion resistant • Hidden set screw for smooth aesthetics • Low long term maintenance • To be used with 1”, 1¼” or 1½” pipe sizes • Available from stock Kee Lite fittings can be easily installed with a hex key and pipe cutters, there is no need to weld, thread or drill, saving you both time and money.

L61

Straight Kit

Corner Kit

6’ Extension Kit

Available in pre-packaged Corner, Straight and Extension Kits.

L19

L160

L150

LM58

L45

LC50

Water Treatment Facilities • Industrial/Commercial • Institutional Corrosive Environments • Retail & Restaurant Design • Municipal Now Available in 24 different models

30

F.W. WEBB COMPANY

www.fwwebb.com

Industrial Line Card

Dean Plouffe Regional Sales Manager dean@fwwebb.com

Contact: Dean Plouffe Phone: 781.272.6600

The Leader in Valves/Automation • Aloyco Stainless Valves

• American Iron Ball Valves • Apollo Ball Valves • Asahi Ball & Butterfly Valves • Asco Solenoid Valves • Babbitt Chain Operators • Centerline Butterfly Valves • Conbraco Safety Relief Valves • Crane Valve • Crosby Safety Relief Valves • DFT Check Valves • Edward Steel Valves • Endress+Hauser Level, Flow, Temperature, Pressure, Recorders, Liquid Analysis, Web Asset Mgmt.

• Flowseal Butterfly Valves • Habonim Ball Valves • Hayward Valves • Inline Ball Valves • ITT Engineered Valves Cam–Line, Cam–tite, Dia–Flo Diaphragm Valves Fabri Knife Gate Valves, Skotch Trifecta • KTM Metal Seated Ball Valves • Masoneilan • Nibco Valves • Rego LP Gas Valves • Resun Plug Valves • Richter Teflon–Lined Valves • Sharpe Valves 3-Piece Ball Valves • Strahman Sampling Valves • Velan Forged Steel Valves • Victaulic • Vogt Forged Steel Valves • Watts Backflow Devices • Xomox Plug, Ball & Butterfly Valves • Zook Rupture Disks and Accessories

Pipe

• • • • • • • •

• • • •

• • • • •

& Fittings

Ameron Bondstrand Fiberglass Capitol Forged Steel Fittings­ Cerro Copper Tube/Brass Pipe Dresser Couplings & Repair Clamps Felker Stainless Steel Pipe Flex–Hose Connectors & Exp. Joints Forged Steel Fittings +GF+ Georg Fischer • Signet • Valves Cool-Fit ABS Harvel Pipe Kee Klamp Rail Fittings Transair Fittings PVC/CPVC – Fittings – Chemtrol, Spears – Pipe – Charlotte, Harvel Resistoflex Teflon–Lined Pipe Skinner Emergency & Repair Clamps Tylok Compression Fittings Victaulic Viega ProPress Copper Fittings

Fall 2009

“Single Source” Distribution

Pipe

& Fittings

• Weld Bend Fittings • Wheatland Carbon Steel Pipe • Zurn Acid Waste Pipe

Pumps • • • • •

• • • • •

Armstrong Commercial Dean High Temperature Grundfos Commercial/Industrial Gorman Rupp ITT Goulds Aquavar, Aquaforce, Goulds G & L, Goulds Vertical Turbine Pumps, Goulds Water Systems, Marlow Myers Reciprocating Summit End Suction, Self Priming Taco Commercial/Industrial Versa–Matic Diaphragm Zoeller Effluent, Sewage

Industrial Specialties

• Ashcroft Gauges & Thermometers • Barco Rotary Joints • Bauer Ladders • C/M Hoists • Flexhose Expansion Joints • Flexitallic Gaskets • Gates Hose & Fittings • Keckley Strainers • Krylon Aerosol Paints • Lyon Shelving, Lockers • Nycoil • Permatex • Pipe Hangers/Insulation • Skillers Gloves & Protective Clothing • Viking Sprinkler Heads

Bio–Pharm

• • • • • • • •

HVAC/R – Steam

• • • • •

• • •

•

Alfa Laval Fittings, Pumps Ashcroft Gauges Crane Saunders Diaphragm Valves Habonim 3 Piece Ball Valves Newman Sanitary Gasket Resistoflex Spirax–Sarco Clean Steam Trent Tube 3M Industrial Adhesives & Tapes Air Cleaners / Filters Airco Furnaces Barnes & Jones Cage Units Beacon Morris Commercial Fin Tube/Unit Heaters Bell & Gossett Chandler Evaporators Comfortaire Window Air Conditioners/Dehumidifiers Comfortmaker Air Handlers/ Air Conditioning Equipment

HVAC/R – Steam • • • • • • • • •

• • • • • •

Daikin Air Conditioning Units Danfoss Valves Grid Cast Iron Unit Heaters Honeywell Invensys – Siemens, RobertShaw Johnson Controls Laars Commercial Water Heaters Modine Unit Heaters Peerless, Weil–McLain, Columbia Boilers Siemens – Landis, Powers Source 1 Parts Authorized Parts Spirax Sarco Steam Specialties Steam Coils/Hot Water Coils Tecumseh Compressors York Heating and Cooling Systems

Plumbing

• • • • • • • • • • • • • • •

American Standard Fixtures Bobrick Partitions/Grab Bars Bradford White Water Heaters Bradley Wash Fountains Chicago Institutional Faucets Cuno Water Filters Elkay Drinking Fountains Grohe Haws Emergency Eyewash Jacuzzi MacClean Water Conditioners Sloan Flush Valves & Parts Speakman Emergency Showers T & S Brass Toto Fixtures & Faucets

Tools

• • • • • • • •

Craftsman Knaack/Weather Guard Lenox Saws/Blades Milwaukee Power Tools Rayovac Flashlights/Batteries Reed Pipe Tools Ridgid Tools/Pipe Machines Turbo Torch

Value Added Services • • • • • •

• •

Pipe Fabrication/Fire Protection Haws Plant Safety Survey Pump Service & Repair Safety Relief Valve Repair Single Source Solutions Steam/Water/Energy Conservation Valve Automation VMI – Vendor Managed Inventory

F.W. WEBB COMPANY

31

Presorted Standard US Postage Paid Permit No. 12 Bedford, MA

F.W. WEBB COMPANY 160 Middlesex Turnpike Bedford, MA 01730 www.fwwebb.com We Honor:

F. W. Webb is a participant in American Express’s Corporate Procurement Card Program.

F. W. Webb Company is in no way responsible for any printing errors, omissions or typos in the WinSheet.

More Good News!

Through www.fwwebb.com to WebbConnect, you can: Place Orders • Get Pricing • Check Inventory Evaluate Heat Loss/Gain • E-mail

We are pleased to announce two new developments:

71 Convenient Locations CONNECTICUT Franklin 888-642-9086 Hartford 800-252-9322 Hartford Victor 800-243-9360 New Haven 800-636-7524 Waterbury 800-572-6479 MAINE Augusta 800-322-4700 Bangor 800-432-7371 Biddeford 800-443-0505 Caribou 800-339-3029 Ellsworth 888-882-9322 Lewiston 800-252-2000 S. Portland 800-482-0791 Rockland 800-287-0015 West Bath 800-427-7990

Winslow F. W. Webb 800-640-9322 Kennebec Supply Kentrol/Sevco 800-533-1172 MASSACHUSETTS Auburn 800-872-0211 Bedford 800-221-9322 Bellingham 508-966-4999 Boston 617-482-8387 Brockton 800-544-9322 Canton 781-828-5559 Dedham 800-820-9322 Fitchburg 800-322-0899 Gloucester 978-283-7800 Greenfield 800-564-3644 Haverhill 800-521-7499 Hingham 781-749-9322

Hyannis 800-352-3159 Lowell 800-642-9322 Malden 800-963-7111 Methuen 866-548-9322 New Bedford Babbitt 888-354-0048 Northampton 800-282-7721 Pittsfield 800-578-9322 Plymouth 508-830-0125 Salem 800-345-5025 Springfield 800-660-3141 Sturbridge Pipe Depot 508-347-3342 Woburn 800-253-7838 Utilities Supply 800-343-7555

NEW HAMPSHIRE Concord

888.508.0050

Dover 800-582-7196 Exeter 888-993-9322 Gilford 800-345-1771 Keene 800-235-1218 Lebanon 800-322-8707 Madison 800-852-9203 Manchester 800-789-6488 Nashua 800-462-1440 NEW YORK Albany 800-432-9322 Binghamton 888-593-9322 Clyde 800-828-8824 Plattsburgh 800-622-9322 Queensbury 800-826-0326

Syracuse 800-262-9222 Utica 315-724-3191 RHODE ISLAND Cranston 800-795-6390 Webb Pump 866-850-7867 Webb Bio-Pharm 877-932-2246 Warwick 888-225-6850 VERMONT Barre 800-244-5044 Bennington 800-821-9506 Brattleboro 800-821-9511 Rutland 800-622-4365 Springfield 800-872-5303 St. Albans 800-696-3763 St. Johnsbury 800-872-8028 Williston 800-696-0340

F.W. Webb is a member of the following associations: A-D (Affiliated Distributors), ISPE, TAPPI, NECCARAPA, MCAA and MHEC.

For questions or comments, please email Carol Rosinski (Production Manager) at crr@fwwebb.com.

 Webb Pump has partnered with the Dover Pump Solutions Group.

Effective immediately, the following key industrial pump lines are now available through Webb Pump: Wilden, Blackmer, Mouvex, Neptune, Almatec and Griswold. (see page 2)

 Webb Kentrol/Sevco is acquiring the Control Equipment Company in Cazenovia NY. They are the MASONEILAN Representative for upstate New York. Kentrol/Sevco now has the MASONEILAN product line for all New England and Upstate NY. (see page 3 ) Webb is committed to provide more products, services, and knowledgeable customer service people. All this with the pledge that...

John Pope, CEO • jp@fwwebb.com Jeff Pope, President • jsp@fwwebb.com