WinSheet - Summer 2010

F.W. WEBB COMPANY

Sheet

The Webb Industrial News is a Quarterly Catalogue of F.W. Webb Company

VALVES / AUTOMATION

PIPE / TUBING / FITTINGS / FABRICATION

WINTER 2007 summer 2010

HVAC/R EQUIPMENT / CONTROLS

FELKER Wheatland Made In The USA

PLUMBING

INDUSTRIAL SPECIALTIES

PUMPS

ARMSTRONG

In This Issue: In the News.....................................2-3

Webb Pump..................................... 15

Refrigeration.................................... 25

Pipe & Tubing.................................... 4

Webb Kentrol/Sevco...................16-18

Institutional/Property Management.... 26

Valves............................................5-9

Webb USCO – Plastics................19-20

Industrial Specialties....................27-28

Hose................................................ 10

Webb BioPharm............................... 21

Tools..........................................29-30

Webb Piping Solutions....................... 11

Webb HVAC/R & Controls................ 22

Safety.........................................30-31

Specialty Process Piping & Hose Solutions.........................12-13

Webb HVAC – Energy Saving Commercial Equipment.................... 23

Fire Protection.................................. 14

Webb HVAC/R – Source 1 Parts....... 24

In the

News . . .

F.W. Webb’s 17th Annual Vermont Expo was held on May 6, 2010 at the Barre Auditorium in Barre Vermont. It was a great turnout, as always, with well over 100 manufacturers showcasing their products. A great time and great deals were had by all.

Customers walking throughout the many vendor booths at the Expo.

Milwaukee Tool tent specials.

Lenox promotes Lenox 301.

F.W.Webb’s PurePro booth displaying an array of products.

Pete Dwyer, F.W.Webb LP Gas Product Manager (r) talking with a customer.

NHMS booth displays Nick Sweet’s ACT car.

Qualifying times won tickets to Loudon NH’s NASCAR June race.

Syracuse Open House

A view of the Expo from above - it was a great turnout!

May 13, 2010

The Syracuse open house was a smashing success with over 900 customers and 1150 total including vendors and Employees. The new 100,000 sq foot facility was fully opened in February with a 5000 sq ft batch center. The customer and vendor feedback was outstanding and many prizes were given away. Everyone left with something!!

1) From left to right: Joe Vanderworken of Woodcrest; Tom McGee of RST Builders; Keith Button and Dennis Button of F.W.Webb; and Mark Robinson of Comfort Systems USA. 2) Emerald City Scottish Pipe band performed live! 3) Steve Perkins, F.W.Webb Sales Representative, Ed Robicheau, General Manager (r) 4) It was a great turnout with the crowd enjoying the food. 5) Many vendor displays throughout the new facility.

3 2

F.W. WEBB COMPANY

1

2

4

5 www.fwwebb.com

...

(continued)

Chip Slattery Promoted to Internet Marketing Manager Announcing Chip Slattery as the newly created position of Internet Marketing Manager.“This position has been created in the company so that we can grab more business on the world wide web,” quotes Jeff Pope. Chip’s position will be to market all the web sites that have been, and will be created for the internet. He will also be looking at current stuff like Twitter, Facebook and other sources to see where Webb can make more on-line noise.

He will be trying to grab as many e-mail addresses as he can to blast out news and sales promotions also. When our new WebbConnect is ready, Chip will make sure that people know when they surf the internet.

I look forward to Chip helping Webb to become a prominent player in this unique market. Congratulations Chip!!

Nick Pelletier Promoted to Operations Manager of Bangor Branch Please join us in congratulating Nick Pelletier on his promotion to Operations Manager in the F.W. Webb Bangor branch.

Tim Largay (Bangor Nick has been General Manager) (l) with Webb since shaking hands with 2006 as CIP CoNick Pelletier (r). ordinator in the state of Maine and he is looking forward to this new opportunity.

Summer 2010

F.W. WEBB GOES GREEN IN brand NEW HYANNIS LOCATION

At 65,000 square feet, F.W. Webb Hyannis is one of their largest branches in the area. The new location features a Frank Webb’s Bath Center, a massive warehouse with 20,000 sq. ft. mezzanine, 10,000 sq. ft. self service counter area and a fully networked training and conference area with a capacity for over 80 people.

What is unique about this facility is that it heats the warehouse area and domestic hot water needs with a hybrid geothermal heating system. Prior to installing the new system, the “building envelope “ was upgraded as well. This included a thermal image of the building. They added insulation, sealed any cracks and improved weather stripping and dock seals to help make the building itself as energy efficient as possible.

At the heart of the system are a water furnace distributed water-to-air heat pump system consisting of 15 heat pumps, 3 energy recovery units or heat exchangers, seven wells (3 feed and 4 return) and a 2000 gallon thermal mass tank with two heat exchangers. One unit heats water, the other takes heat from the water. The Cape has relatively stable groundwater temperatures, (45-55 degrees) which makes it ideal for this type of application. The energy recovery units keep the warehouse temperature range from 5575 degrees. The hybrid part of the system is the solar side.

On the roof of the building are thirty Buderus SKN3.Ov flat plate solar panels. Twenty-six of these panels provide heat to the warehouse area and four provide domestic hot water.

The solar system reduces the load on the geothermal sys-

Matt Hancur Promoted to Webb BioPharm’s Sanitary Pump Product Manager We are pleased to announce that Matt Hancur has been promoted to Webb Bio-Pharm’s Sanitary Pump Product Manager.

As we all know, Matt has embraced the pump aspect of our business over the last 18 months and has dedicated his time learning how to size pumps and all of the technical aspects that go along with that. We have seen a significant increase in our pump sales along with our pump repairs and a lot of this has to do with Matt’s expertise and willingness to learn. Congratulations Matt!

tem and on a perfect, sunny day will provide up to 750,000 BTUs of energy, equivalent to 5.4 gal of #2 fuel oil.

All of the products used in this installation, from pipe, valves, fittings, solar panels, expansion tanks, heat exchangers, pumps, controls, variable speed drives, storage tanks, energy recovery units, data loggers, heat pumps, thermostats and more are available from Webb. The building will be Energy Star certified and then re-certified after a year of operation. There is no back-up boiler for this installation. They burn no fossil fuels. It is 100% geothermal and thermal solar. Says branch manager Marc Nantel, “I am extremely proud of our new building and of this new installation in particular. Our mechanical contractor did a great job on this installation. We are going to showcase it to all of our customers. It really is state of the art and best of all, we were able to coordinate and supply all of the materials for the job.”

For more information, a facility tour or a quote, please call the Hyannis branch at 508-775-3890. For other information or a branch nearer to you please call the main office at 781-272-6600.

Brett Finemore Receives the 2009 Lothar Kartanos Memorial Award I am happy to announce that Brett Finemore of th Queensbury branch will receive the 2009 Lothar Kartanos Memorial Award. The previous recipients were Devon Craig of the Williston branch and Daryl Schoellkopf of Kentrol/Sevco.

This award exemplifies the highest standards of Sales Professionalism, Leadership,Teamwork, Dedication and Loyalty that Lothar Kartanos epitomized through his career at F.W.Webb Company.

F.W. WEBB COMPANY

3

Webb Has All Different Types of Pipe/Tubing 1/8” to 120” and Larger!

• Carbon • Stainless

• Aluminum • Copper

• Cast Iron • Brass

• Plastic • Fiberglass/Epoxy

 Stainless Steel Pipe

 Steel Pipe & Fabrication

304/L & 316/L Stainless, Schedules 5, 10, 40, 80

Wheatland • US Steel • Sharon Tube Charlotte • Cerro

• 1” – 36” • Flange, bell, roll groove and configurations • Stock sizes in 20’ lengths • Special lengths available

F.W. Webb Company has the largest pipe inventory in the Northeast.

Our fabrication shop is capable of cutting, threading, and grooving through 12” pipe. When you call F.W. Webb, a professional inside sales force will handle your orders and questions. We can fabricate for immediate delivery and have 1/8” – 24” pipe in stock.

Continuous Production • 2”– 8” in schedules 5, 10, 20, and 40, Lengths up to 60’

Batch Production • 10”– 60” in schedules 5, 10, 20, 40, and 80, lengths up to 48’

All Sizes and Schedules 1/8” − 24” In Stock

 Soil Pipe

Our Pipe Depot Stocks...

Copper Tubing/Coils / Carbon Steel Pipe

 CERRO Copper Tubing/Coils

Cast Iron Soil Pipe & Fittings

• Domestic A53 CW, ½” – 4” Sch n end, 1/8” – 4” in black T&C, ½” – 4” in Galvanized T&C ½” – 4” in Sch 80 in black plain end, 2½” – 4” in Sch 40 groove x groove • Domestic A53 ERW, 2½” – 30” Sch 40 & standard sizes • Domestic A53 ERW, 8” – 16” in light weight ranges • Domestic A53 ERW, 6” & 8” XH black plain end • Domestic A106 Seamless, ½” – 2” in Sch 40 & 80 • Imported A106 Seamless, ½” – 12” Sch 40 & 80

Stainless Steel • Domestic 2”– 12” Sch 10 304L – A312, 316L – A312, 304L – A778 (3”), 316L – A778 (3”, 10”, 12”) • Victaulic Sch 5 for Pressfit

Lengths & Coils Webb has inventory of over onehalf million lbs. of copper tubing from ¼” to 6” in diameter.

PVF • Plumbing • Sprinkler • HVAC • 100 customer service persons • 200 delivery trucks • Dedicated account manager • $90,000,000 inventory • Product application specialists • 24-7-365 • Hard to find products • Professional submittals • 65+ branches

• Job usage reports • WebbConnect, On-Line access (www.fwwebb.com) • Expediting • On time . . . Accurate . . .

Complete Deliveries • More products & services less hassle • Project pricing

PVC/CPVC – HARVEL 4

F.W. WEBB COMPANY

www.fwwebb.com

Valves Made In The USA

 19 Series Bronze Safety Valves

 119 series cast iron flange safety valves

A dependable cast bronze high capacity safety valve ideal for use on all types of boilers, piping systems and unfired pressure vessels. This rugged design features improved alignment for enhanced performance and reliability. Other features include optional metal seating, stainless steel wetted trim in all sizes, and a new, more descriptive model numbering system. Flow ratings are National Board certified in accordance with ASME sections I and VIII. ASME Section I and VIII Sizes ½” through 2½” Set pressures 5 to 300 psig Maximum temperature is 406°F, 422°F for model 19S Applications: Section I Power Overpressure protection of steam boilers, sterilizers, distillers, cookers, and pressure reducing stations.

Boilers Pneumatic conveying equipment, air compressors, receivers and dryers. Steam, air and gas accumulators, Section VIII pressure vessels and pressure piping systems. pressure vessels Features: • Wide wrenching hex for easier, faster installations • Stainless steel springs are standard • Choice of Teflon® or metal-to-metal seating • Teflon® PFA seat resists corrosive boiler chemicals and excessive vibration • High-capacity full nozzle design available in six orifice sizes • Two control rings for maximum performance and adjustability • Short “tuned” blow down minimizes product loss • Tapped body drain allows piping of condensate away from equipment • Reduced repair costs: soft seat easily replaced • Registered in all Canadian provinces under CSA B51 CRN G8547.5C

These flanged, heavy duty and high capacity safety valves are ideal for use on all types of boilers, pressure vessels and pressure piping systems. These ruggedly built valves offer you a cost-saving alternative to conventional steel bodied valves without compromising quality or performance. These valves feature a top guided design and two control rings to ensure seat tightness, repeatable performance and extended service life. Flow ratings are National Board certified.

ASME Sections I & VIII, for steam, air and gas service Set pressures to 250 psig at 450°F max Flanged inlet sizes 1½” through 6” ANSI 250 lb.

Threaded inlet sizes 2” through 3” FNPT Applications: Overpressure protection of steam boilers, deaerators, accumulators, pressure reducing stations and pressure piping systems. Pneumatic conveying equipment, air and gas compressors, receivers and dryers. Per the ASME code, cast iron safety relief valves must not be used for lethal or flammable fluid service.

Section I Features: Power • Metal to metal seating, lapped to optical flatness Boilers • High-capacity semi-nozzle design available in 8 orifice sizes Section VIII • Stainless steel wetted trim is standard pressure • Two control rings assure maximum performance vessels and dependability • Designed for new installations and replacement of existing valves (high flow rates and face to face dimensions enable direct replacement of most competitive models) • Designed for ease of service or repair • Ductile iron caps, forks and levers for added durability • Registered in all Canadian provinces under CSA B51, CRN OG8547.5C • Drip pan elbows for discharge piping available

For Steam, Air and Gas Service

 500 series multi purpose safety relieve valves Versatile safety relief valve available in bronze, carbon steel or all stainless steel construction, suitable for a wide range of steam, air, gas and liquid applications. High capacity full nozzle design is available with metal to metal, PCTFE or elastomer O-ring seating.

Short tuned blowdown and backpressure tight body minimizes fugitive emissions and product losses in the event of valve operation.

ASME Section VIII Air, Steam, and Liquid service Sizes 1/2” through 2” NPT Set pressure range 5-900 psig @ 800°F max.

Applications: • Pressure Vessels and Pressure Piping Systems • Pumps, Tanks and Hydraulic Systems • Thermal Relief of Liquid Filled Vessels • Chemical, Process and other Industrial Plants.

• Power Plant Auxiliary Systems • Cryogenic and Industrial Gases • Air and Gas Compressors and Dryers • Vacuum Relief Section VIII pressure vessels

Summer 2010

Features: • Wide Range of Materials and Options • One Trim Design is Suitable for Steam, Air/Gas and Liquid Service • High Capacity Full Nozzle Design • Stainless Steel Springs • Integral Lift Stop • Self - Aligning Pivoting Disc • API 527 Seat Tightness, standard for all models • Tuned Blowdown - Short and Adjustable, reduces product losses.

• Backpressure Tight Design Minimizes Fugitive Emissions • CSA B51 CRN OG8547.5C

100% American Made

F.W. WEBB COMPANY

5

ITT Engineered Valves Delivering high quality, innovative flow control solutions for Abrasive Wear Resistance, Corrosion Resistance, and Critical/Hazardous Containment in a wide range of industries worldwide.

Fabri-Valve c67 popular option now standard!

The mechanical retained seal option is now standard on all sizes of the Fabri-Valve C67’s. This popular option features set screws that are drilled into the bottom portion of the flange. These screws press against the seal that is retained in the valve body by its trapezoidal shape. Since the feature is now standard, there is no additional cost for this popular feature.

If you have any questions, please contact your F.W. Webb Sales Representative.

Cam-Tite® and Cam-Line® ball valves with H-Series Compact

actuators have been converted to C-Series Compact II actuators.

The Compact II is one of the most rugged actuators on the world market. Due to its ruggedness, Compact offers a seven year warranty on the actuator.

Advantages of the C-Series Compact actuators: • Powerful - Four pistons generate twice the torque of comparably sized two piston designs • Energy saver - Reduces the average air consumption by 50% due to compact physical size • Fastest - Has faster stroke due to shorter travel distance • Smallest and Lightest - Size is about 50% of a traditional 2 piston actuator with same torque value, due to the 4 piston design • Minimal easy maintenance • Less wear of moving parts (piston and o-rings) than any traditional 2 piston actuator due to the concentric pistons design • Safe springs configuration change with cover bolts long enough to release spring load before removing the cover • Easy spring configuration changes, due to concentric spring structure • Wide options of Fail/Safe combinations, particularly in low air operating pressure The H-Series actuator has been discontinued and ITT will no longer ship or quote the obsolete H-Series actuator.

If you have any questions, please contact your F.W. Webb Sales Representative.

6

F.W. WEBB COMPANY

www.fwwebb.com

Valves

Don’t sweat it.

ProPress it! ®

Viega ProPress fittings...the fast, flameless, reliable way to connect 1/2" – 4" copper and stainless pipe. for details.

To win Press Tool or a Viega stainless cooler, visit www.NoSweatFittings.com For morea information, please contact your local F.W. Webb sales representative.

For complete rules on how to win, go to www.NoSweatFittings.com/rules.html.

To avoid the AFTER WHAT – switch to Flexitallic.

Gasket failures can lead to system downtime and serious environmental impact. As the industry leader, Flexitallic Spiral Wound Gaskets are consistently manufactured to exacting engineering standards.

They’ll stand up to the toughest temperature and pressure conditions, they’re resistant to virtually all corrosive and toxic media, and you get the same high quality gasket on time, every time.

Gasket specifications should be reviewed and updated every 2 years. Call F.W. Webb today for a gasket consultation to make sure you are specifying the most reliable gaskets.

Summer 2010

F.W. WEBB COMPANY

7

Valves

CRANE & F.W. Webb - the most experienced team in the Northeast.

• Engineered valve solution to reverse flow problems encountered in all process pipelines.

• Lighter weight than standard swing check valves.

• Independent plate suspension improves dynamic response and minimizes valve chatter.

• Retainerless design provides for no fugitive emission.

• High Performance shut off and modulating service for standard industrial process lines.

• Classes 150 - 600.

• Materials of construction options include Carbon and Stainless Steels.

• Both Wafer and Lugged body styles available.

• Sizes up to 48” available from factory inventory.

• Triple offset design provides reliable, zero-leakage, bi-directional shut-off closure to 1000° F. • Classes 150 - 600.

• Fire Tested to API 607 Rev. 4.

• Low break-away and operating torque.

• API 609 Table 2 Lug style as well as Double Flange Long & Short patterns available.

• Sizes to 24”.

Reliability you can count on at every turn.

Aloyco • Center Line • Compac-Noz • CRANE • Duo-Chek • Flowseal • Jenkins • Krombach • Noz-Chek • Pacific • Stockham • Triangle • Uni-Chek

8

F.W. WEBB COMPANY

www.fwwebb.com

Valves

WATER HAMMER? You don’t have to live with it... use the right check valve.

ASCO® 8262/8263 Series two-way direct acting solenoid valves The 8262/8263 Series two-way direct acting solenoid valves now have increased AC and DC pressure ratings and real-time online configuration and ordering. The valves are ideal for applications in industrial and agricultural machinery, food products machinery, laundry and dishwashing appliances, and medical and analytical instruments. The 8262/8263 Series valves are available in normally-closed, brass and stainless steel constructions.

They can be used to control the flow of air, water, and light oil and are available in 1/8-inch, ¼-inch, and 3/8inch pipe sizes.

The online configuration tool allows a customer to quickly build a valve to meet a set of specific requirements.

It then displays the list price, availability, 3D CAD drawings, and specifications for the configured product. The configurator generates an order code for the valve that permits an immediate online purchase, plus greatly simplifies the reordering process. Most of the 8262/8263 Series valves are available through the ASCO Today sameday shipping program. To download the 8262 catalog, features and benefits sheet, and design a valve, visit ascovalve.com/8262configurator.

SILENT CHECK VALVES Please contact your local F.W. Webb representative for more information.

Contact your F.W. Webb representative for more information.

Summer 2010

F.W. WEBB COMPANY

9

Hose Contact Peter Marshall, Gary Rose or Mike Costa: 800.795.6390

Peter Marshall

The F.W. Webb hose division has the capacity to make hydraulic hose assemblies to your specifications.

Whether it is ¼” or 2”, 150psi to 6,000 psi. We can meet your requirements with the highest quality and reliability with Gates Rubber Products.

F.W. Webb’s Hose Division can make custom hose assemblies specific to the customers’ needs.

Pre-Season FUEL OIL DELIVERY Promotion!

Order by September 30, 2010 and SAVE 10% off the regular price!

Completely redesigned from the inside out to incorporate the best materials and construction. Fuel Oil Delivery Hose will stand up to your toughest, roughest service. Whether you’re delivering to homes, businesses, farms or construction sites, Fuel Oil Delivery is the hose you can depend on for long -lasting trouble-free service.

To order, please contact Peter Marshall, Mike Costa or Gary Rose at 401.463.4108.

Gates is an engineered system of hose and fittings designed to be used together for top performance, and a long, safe, service life.

Contact your F.W. Webb Sales Representative for more information.

10

F.W. WEBB COMPANY

www.fwwebb.com

Pipe Fittings/Webb Piping Solutions Gary Rose General Manager Piping Products

Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

Handling corrosive materials in these challenging economic times can be difficult. Our factory trained staff here at Webb Piping Products have the product knowledge, and the capability to assist you in your most difficult applications. Crane Resistoflex and Crane Xomox are the trusted quality brands in the industry. There extensive product offering coupled with the team at Webb Piping Products are ready to assist you in offering the right products for your corrosive handling needs. Call us first for cost effective corrosion handling needs.

Tylok is a registered Women Business Enterprise (WBE) with the following companies and resides on their Supplier Diversity Database.

• Miller Coors • • • • • • • •

BP American Electric Power Exxon Mobil Anheuser-Busch Chevron Duke-Energy International Paper Bristol-Myers Squibb Company • Nestle USA/Nestle Waters North America/Purina PetCare/Dreyers • Xcel Energy

• • • • • • • •

General Mills ADM Kraft Foods Raytheon Company Daimler Chrysler Corporation Sara Lee Corporation Eaton Corporation Marathon Petroleum Company • Sara Lee Corporation • Eaton Corporation • Marathon Petroleum Company

Installation of Parker Legris Transair Push-to-Connect Piping System The Transair piping system was Specifically Designed and Engineered for Compressed Air to eliminate the issues that are created by Traditional Pipe Systems. Transair has the lowest overall cost of installation and ownership. It is energy efficient, qualifies as capital equipment, easy to install and modify.

Contact your local F.W. Webb stocking distributor for more information.  Brett Finemore (second from right) assists Bob Whittaker (right) in the training of Bob’s Instant Plumbing Group in Plattsburgh, NY. NADCOR is located at 6 Industrial Blvd.

Plattsburgh, NY 12901.

Bob’s installation team will be doing the install.

Seen here are Bob Whittaker and Brett Finemore certifying the installers on the installation process.

NADCOR Door manufacturer’s new  facility will be opening this month in this new building (right) and wanted the Parker Legris Transair new technology for its compressed air system.

Summer 2010

F.W. WEBB COMPANY

11

Pipe Fittings/Webb Piping Solutions

Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

Crane Resistoflex and Crane Xomox: You’re Single Source for Your Most Difficult Corrosion Applications.

 xomox® tufline fully lined plug valves

• These valves are more versatile, and often out-perform alloy valves.

• More economical than alloy valves.

• With FEP and PFA lining, cast, dovetail recesses and machined grooves lock the lining to the valve body casting. The locked-in lining is virtually impervious to shrinking, stress-cracking, collapse, or blowout.

• Unlike alloy valves, there is no need to inventory different valves for various applications.

• There is less chance of costly and dangerous installation errors.

• Media contamination is prevented.

• Positive shutoff.

• FEP and PFA locked-in lining.

 xomox® tufline fully lined Ball valves

• Tufline Lined Ball valves have a metal-tometal body joint to control compression of the liner for assured sealing.

• The seats are easily and quickly replaced.

Standard port lined ball valves

Full port lined ball valves

2-way fully lined plug valves 3-way fully lined plug valves

Saunders IDV with Actuator Saunders automated packages are available with options including switches, positioner, limit stop and visual open/closed indication.

 xomox® tufline fully lined accessories

Tufline Fully Lined Accessories are a reliable and economical alternative to costly highalloy products.

• Wafer Swing Check Valves • Ball Check Valves • Piston Check Valves • Sight Flow Indicators • Strainers • Tank Bottom Valves • Poppet Check Valves • Clamp Valves

Saunders IDV Available with various body linings and diaphragms appropriate for a wide range of applications

Xomox® valves are lined with DuPont™ Teflon® fluoropolymer.

The Cost–Effective Way to Fight Crane Resistoflex / Crane Xomox now give F.W. Webb the capability of offering the complete Crane package for corrosion–resistant plastic–lined pipe, fittings, and valves. The economical alternative that combines the mechanical strength of steel with the chemical resistance of an engineered plastic. Why live with the constant maintenance and replacement of inexpensive materials or the outrageous price for alloy piping?

12

F.W. WEBB COMPANY

Corrosion

F.W. Webb Company uses only Resistoflex–lined pipe and fittings and are the only factory– authorized distributor in the Northeast. Our Conrac Machine allows us to fabricate custom spool pieces for Resistoflex piping systems up to 8” diameter.

Our factory–trained personnel located at our Cranston, RI facility are here to serve you with years of experience and are knowledgeable in lined piping systems. Webb is the only exclusive authorized stocking distributor with the inventor y and per sonnel dedicated to serve you for all lined product requirements.

www.fwwebb.com

Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

Pipe Fittings/Webb Piping Solutions

You know the name but do you know who we really are?

Piston valves? Yes, but a whole lot more.

Sampling valves? Yes, but a whole lot more.

We’re celebrating our 90th anniversary. Ninety years of providing the Petrochemical, Refinery and Polymer markets, world-wide, with the highest-quality, best-performing and most-reliable valves on the market today. No other company can match our longevity, process knowledge, design engineering capability, extensive product lines, worldwide sales network or customer focus. But, it appears those strengths are a well-kept secret.

So, let’s start talking. Over the next 12 weeks we’ll show you why Strahman is the best choice for your process valve needs. Strahman – great before and truly best now.

In 2004, Strahman made a strategic acquisition of the European valve manufacturer formerly known as “MG Fetterolf.”This gave us two fully staffed, state-of-the-art design and manufacturing facilities to serve the world’s needs for engineered valves. One is our world headquarters in Bethlehem, PA, U.S. and the other in Mery, France. This also brought Strahman over 20 years experience in the design and manufacture of engineered process valves.

Strahman designs and manufactures a full line of the world’s highest quality, custom, process and fabricated valves: •

Piston Valves

•

Control Valves

•

Severe Service Gate Galves

•

Diverter Valves

•

Sampling Valves

•

Severe Service Metal-Seated Ball Valves

•

Injection Valves

•

Spray Rinse Valves

•

Line Blinds

•

Triple-Offset Butterfly Valves

Summer 2010

F.W. WEBB COMPANY

13

F.W. Webb’s Fire protection division continues to add the latest innovative products in the market. Some of our recently added items shown on this page continue to lend themselves to faster and easier installation and maintenance.

Fire Protection Contact Bob Schuler or Mac McNulty at 800.624.6647

Mac McNulty

Feel free to ask us for any help we can offer with any of our products. Thank you for your continued support!

 Never Trip Auxiliary Drain The Potter Never-Trip auxiliary drain replaces the old conventional drum drip. The Never-Trip is a completely assembled and tested compact valve and collection chamber assembly that conforms to NFPA 13 requirements for auxiliary drains for dry pipe and preaction systems.

The Never-Trip prevents accidental trips of dry pipe and preaction systems and eliminates the cost associated with resetting these systems.

With the handle in the COLLECT position the collection chambers are connected to the system through the valve and any water or condensate will flow directly into the collection chambers. The drain is isolated from the collection chambers when the handle is in the COLLECT position.

As the handle is moved from COLLECT to DRAIN, the collection chambers are isolated from the system before they are connected to the drain through the valve.

Service Pressure: 175 PSI Valve body: Galvanized steel Collection chambers: Galvanized Steel Handle: Chrome plated steel Connection and drain: 1” NPT

 AquaFlex Flexible Sprinkler Fittings

 aquaflex stainless steel

Save up to 60% jobsite time and reduce risk of leaks during installation!

The fastest, easiest flexible sprinkler drop system available.

with pre-assembled sprinkler

AquaFlex Series AQB (braided) and Series AQU (unbraided) systems will be available to order with pre-assembled sprinklers.

Systems will ship under a single part code in boxes of (10) with each assembled system consisting of: • Threaded branch line nipple • Flexible stainless steel hose • Leak-tested sub-assembly of reducer nipple, sprinkler with bulb protector and paint shield • Escutcheon rings will ship in the same box The complete system will ship along with a box of (10) 24” 1-BEE2 installation-ready brackets.

14

F.W. WEBB COMPANY

sprinkler fittings

Experience the new AquaFlex one-piece, open-gate 1-Bee2 bracket system. This revolutionary, easy-to-use system offers: • Installation-ready 1-BEE2 one-piece bracket • Braided and unbraided hoses available from 31 – 72” • 24 and 48” width brackets • Short and long 90º elbows • One bracket design for pendent, semi-recessed and concealed sprinkler installation

www.fwwebb.com

Cranston, RI: 866-850-7867 Winslow, ME: 800-452-1928 Syracuse, NY: 866-850-7867

Pump Sales • Service • Repair

Jim Bodle General Manager

Webb Pump continues to grow by providing honest service, competitive prices, knowledgeable team members, and world-class products that are delivered on-time, every time. We work hard to satisfy the requirements of our customers each and every day and look forward to earning your business as well!

Grundfos Day at Webb Pump Webb Pump was pleased to host the Grundfos Pumps on Tour trailer at our Cranston Rhode Island facility on May 14th from 10AM to 3PM! The event was extremely well-attended with more than 100 of our key customers taking the time out of their busy day to visit our shop and learn about one of our key product lines. The impressive Grundfos trailer featured the latest in pump technology and acted as a 30-person

classroom for the three product seminars that were conducted over the course of the day by Grundfos personnel. We anchored the event with a first-class catered barbecue and we added to the fun by raffling off five prizes including the Grand Prize Gas Grill as well as Red Sox tickets and restaurant gift certificates. While the weather was not the most cooperative, the rain held off and we even saw some sun by late afternoon!

Ted Haley took the opportunity to present a seminar on high-purity pump repair and testing to a team of engineers from Genzyme.

Jim Bodle (r) and Dave Buckless (l) prior to the big event!

Grundfos’ Pumps on Tour program is anchored by an impressive 80 foot tractor trailer that expands to provide a product showcase and a teaching classroom that sits 30 people.

In addition to the hands-on pump demos, Andy Sayegh from Grundfos hosted three seminars over the course of the day that educated our customers on the Grundfos company, latest products, and their commitment to new product development.

The trailer offered customers the opportunity to see the latest in energysaving variable-speed technology as well as insight into the full breadth of the Grundfos family of companies.

Webb Pump was pleased to have over 100 people in attendance for the show; our repair facility doubled as a full-service cafeteria for the day!

Amazingly enough, we had two winners from Rhodes Technologies!

B&M Clambake Company did an exceptional job on the day and provided a full-service BBQ and steak-tips lunch for the crowd. The event was so well-attended that more food had to be brought in at the last minute to feed the masses.

Summer 2010

The Pumps on Tour truck offered working demos of VFD-based pumping systems.

Customers were able to get some handson time with the products to learn how process variables can affect their pump’s performance and energy usage.

Farrell Loughlin from Rhodes was the proud winner of the Grand Prize Gas Grill!

Sid Goode from Rhodes won a set of prime Red Sox tickets for a July game!

F.W. WEBB COMPANY

15

800.452.1928 207.873.7741

Process Control / Control Valves / Instrumentation & Overpressure Protection

Daryl Schoellkopf General Manager

Webb Kentrol/Sevco along with our additions of O’Connor & Senecal, and Control Equipment offers complete process control instrumentation and control valve solutions to industry. We continually strive to bring you new and emerging technologies. Check out our web site to see more of the latest additions to our product offerings.

Webb Kentrol/Sevco-OSI Appointed as Exclusive Representative for Michell Instruments in NE Michell Instruments is pleased to announce the appointment of Webb Kentrol/SevcoOSI as the exclusive representative for Michell Instruments in the 6 New England States. Good technically competent representatives are difficult to find and keep and Michell is delighted to have Webb Kentrol/Sevco as a member of the Michell Instrument family.

 MDM300 High-speed dew-point hygrometer

Highlights: • Repeatedly fast measurements in less than 10 minutes for T95 down to -70°C (-94°F) dew point • Long battery life: more than 48 hours of typical usage between charges • Best in its class: ±1°C (±1.8°F) dew point accuracy • External 4-20mA device input for dewpoint, temperature or pressure transmitters • Bluetooth connection for trouble-free download of data • Built in sampling system to 4500psi with external options to 6000psi

 easidew impedance dew point transmitter

Features: • 2-wire loop powered connection • Dew point or ppm moisture content • NEMA 4X • Excellent sensor protection • Measurement range: -150°F to “70°F • Operating temperature: -40°F to “140°F • Fast response

Applications • Compressed air dryers . Plastic molding dryers . Ozone generators . Industrial gas production and distribution . Medical gases . Pneumatics . Welding gases

 XZR500 and XCU500 Stack Gas Sensor

 Pura Plus on-line trace moisture

Highlights: • Innovative, Metallic Sealed Reference Sensor provides reliable and repeatable measurements with low maintenance • Simple air calibration reduces cost of ownership • Robust design maximizes sensor life • Flexible installation reduces retrofitting and start-up costs • Advanced design is easy to operate and maintain

Features: • Rapid response to ppb level moisture events • Low ppb sensitivity (<1 ppb) • Innovative concept for multiple measurement point installations • Low maintenance • Traffic light status indicator • Programmable warning and alarm setpoints • Modbus network compatible • Multi-channel software for remote interface PC • Ultra-high purity (UHP) gas line specification

and Analyzer

800.452.1928

event sensor

Call Scott, Chad, Parrish, Nate, Dan, Cynthia, Anisa or Bob with your questions.

Scott Varney Chad Collier Parrish Lovell Nate Grady Dan Desilits Cynthia Berkovsky sva@fwwebb.com chc@fwwebb.com par@fwwebb.com nate@fwwebb.com ddd@fwwebb.com ceb@fwwebb.com

16

F.W. WEBB COMPANY

Anisa Meigs Bob Richard ani@fwwebb.com bob.richard@ fwwebb.com

www.fwwebb.com

Specialists in Automated Valves, Process Controls, Overpressure Protection, and Engineered Systems.

 Precision™ Gauge Valves

 ashcroft

• Color coded dust caps for identification • Non-rotating tip • Oxygen service • Integral hard & soft seats • Anti-blow-out shaft • Bubble tight back-seal Multiport • 6,000 & 10,000 PSI valves Gauge Valve, MPGV • PTFE and Graphite seals • Pressure adjusted shaft seals • Comprehensive mounting brackets • Bubble tight seal on gas applications • 100% full pressure test of each unit

Diaphragm Seals

 Fairchild Industrial Controls Pneumatic Pressure Regulators

800.452.1928 207.873.7741

Types 400/500, All Welded Venting Gauge Valve, VGV

P5/T

• Recommended for use where clamped joints are not acceptable • Assists in controlling plant emissions by helping prevent potential leakage of hazardous chemicals • All-stainless steel construction is standard.

Other materials available

Instrument Isolator

Type, 720, 741, 702, 703 High Displacement P3/T

• For pressure instruments ranging from 30” H2O to 750 psi • Used in instruments with large displacement actuators • For applications requiring an impermeable metallic diaphragm • Available in many material combinations • Diaphragm electron beam welded to isolator body • Furnished with fill/bleed connection

Fairchild manufactures a complete line of precision pneumatic regulators including positive pressure, back pressure, and vacuum models. Quality engineering and manufacturing excellence assure that our pressure regulators meet all the requirements of a precision device including: • Pressure accuracy • Sensitivity • Supply pressure immunity

• Drift-free settings • Low output droop

Electro-pneumatic Transducers The electro-pneumatic transducer was developed as a smaller, lighter, and more cost effective alternative to the M/P.An electro-pneumatic I/P, E/P, D/P, and P/I transducer receives an analog or digital input control signal and converts it to a regulated pneumatic output that is directly or inversely related to the input.

Pneumatic Volume Boosters A pneumatic air volume booster reproduces a low flow control signal with a greater flow regulated output pressure. It uses an unregulated input pressure to maintain a regulated output pressure under flowing and nonflowing conditions.

 Apollo® pneumatic actuators Apollo® CompacTorque™ actuators are totally manufactured in the USA and feature rack and pinion design. Available in 11 sizes to complement torque requirements of most Conbraco valves. Both spring return and double acting versions are available. Spring return torque ratings at 80 psig are from 50–10,500 lb-in. Patented Universal Shaft Adapters make it easy for direct mount to Apollo butterfly valves.

Double acting torque ratings at 80 psig range from 58 lb-in. to 25,000 lb-in. Apollo® CompacTorque™ actuators feature ISO 5211 interface dimensions and NAMUR solenoid and accessory interface dimensions. Conbraco also supplies pre-engineered stainless steel valve/actuator mounting kits for all valves equipped for automation.

Made In The USA

Summer 2010

F.W. WEBB COMPANY

17

Safety Relief Valves

800.452.1928

Specialists in Automated Valves, Process Controls, Overpressure Protection, and Engineered Systems.

207.873.7741

Announcing the Release of the Tyco PRV2SIZE Pressure Relief Valve and Vent Sizing and Selection Software

A unique, comprehensive and easy-to-use program, it provides a thorough and integrated approach for sizing all types of pressure relief devices, including low pressure tank protection products as well as regulators, in a single sizing & selection platform.

2 The TYCO PRV SIZE software incorporates over 135 years of experience and engineering expertise for an extensive array of Anderson Greenwood, Crosby and Varec pressure relief devices and related products in one software package. With the TYCO PRV2SIZE software, customers and engineers can address numerous applications in a single sizing and selection platform without the need to use two or more sizing programs. TYCO PRV2SIZE features include: Sizing-and-Selection • Pre-selection of units and sizing calculation methods • Inlet pressure loss input • Addition of 2:1 elliptical head tanks for fire sizing calculations • Multiple valve sizing • Tank blanketing regulator sizing and selection • Immediate flagging of errors against design constraints Related Calculations • Noise level calculations • Reaction force calculations • Combination device calculations Report Generation • Improved tools to export and import device tag numbers, with the capability to mail files directly from the software program • Ability to generate flow curves for Varec tank protection products • Attractive reports and specification sheets

Catalog Data • Catalog information for Anderson Greenwood pilot-operated, direct spring-operated pressure relief valves and regulators, Crosby direct spring operated pressure relief valves and Varec tank protection products • Catalog integration from existing product literature PDFs

Get a free mouse pad when you register to download the software!

Go to: www.kentrol.com and click on this icon to get started!

Call Cord or Gary with your questions.

After–hours Emergency Service: 207.872.4779 sevco.fwwebb.com

18

F.W. WEBB COMPANY

Gary Thibodeau ggt@fwwebb.com

Cord Collier col@fwwebb.com

www.fwwebb.com

Utilities Supply Company 98 Lindbergh Ave. Methuen, MA 01844 Contact Dave McGlynn or Ian Power at 800.343.7555 John Romano Vice President, USCO

 Double-contained pipe

Ask our Plastics Experts About System Joining Methods

Corrosion-Resistant Thermoplastic Due-Pro

Due-Pro Leads the Market for Large, Flexible Systems • • • • • • •

Any combination of PP, PVDF, Halar, or HDPE Components joined by reliable thermal butt fusion To 150 PSI pressure in carrier and containment Accepts many leak detection and location systems Field fabrication from components or pre-fabrication Size ranges for all pressure or drainage systems Supporting devices on inner carrier pipe prevent sagging or buckling • Containment piping can be compartmentalized, creating leak zones, and can be designed for continuous draining

 High purity systems

Today’s thermoplastic piping systems can provide many different benefits over other materials. Some of these benefits include low total cost of ownership, excellent chemical resistance, improved flow characteristics, great insulating properties, and much more. That’s why it’s important to make sure when you’re considering a plastic piping system for any application, that it is approved for the application. When in doubt, please ask an expert!

Asahi/America single wall and double-containment thermoplastic piping systems are joined together using either socket or buttfusion technology. A local fleet of joining equipment is maintained, offering the latest in technology for socket, butt, and IR-butt fusion joining methods. We also offer field support and job start-up assistance. To ensure your next project goes smoothly, please call our plastics experts at 800.343.7555.

Hand Socket Welder

Many models of this hydraulic butt fusion tool for field/trench welding are available.

W3500 Bench Socket 4

Socket fusion toll welds ½” – 2” pipe.

Unit holds 2 sets of heater inserts.

Shop 4 Miniplast

Call us for your

• Polypure™ = Natural Polypropylene high purity needs!

• Purad™ = PVDF Asahi/America offers PolyPure and Purad products in sizes to fit your needs. For both large and small systems, Purad is available in a complete offering of ½” – 12”. PolyPure may be obtained in sizes of ½” – 4”. Both PolyPure and Purad fittings and valves are also available in zero dead leg configurations.

In addition to piping, fittings and valves, Asahi/America’s Vortex Flow Meter is ideal for sanitary pharmaceutical and bio-chemical operations. The instrument has no moving parts and is crevice-free. It may be steam-sterilized and can be installed in Purified Water, Water for Injection, and Solution Preparation Systems.

For socket fusion welding of components from ½” – 4”.

Selectable socket depth inserts.

W2500 Shop 12

Bench-style butt fusion tool for 1½” – 12” PP and PVDF welding.

Most compact butt fusion tool avilable for ½” – 4” straight or mitred welds.

Shop SP 110S

Latest IR, non-contact fusion tool for sizes ½” – 4”. The unit has a touch screen and features automatic operation.

Order Directly On-Line!

Visit: www.uscosupply.com Summer 2010

F.W. WEBB COMPANY

19

Utilities Supply Company 98 Lindbergh Ave., Methuen, MA 01844 Contact Dave McGlynn or Ian Power at 800.343.7555

F.W. Webb Syracuse Receives Asahi/America Award for Outstanding Sales Achievement

 UV Resistant clear pvc piping EnviroKingUV™ offers ideal solution for photobioreactor tubing and other outdoor applications Harvel announces the launch of EnviroKingUV™, a clear PVC piping that is suitable for exposure to sunlight. Unique UV blocking technology reduces harmful ultraviolet light wavelengths from penetrating the plastic while allowing beneficial wavelengths through. EnviroKingUV™ offers a cost-effective solution for photobioreactor tubing and other outdoor applications exposed to sunlight where transparency is required.

Harvel EnviroKingUV™ piping is produced from a unique, rigid, transparent PolyVinyl Chloride (PVC) compound with a Cell Classification of 11553 per ASTM D1784. This material, which shows a slight blue tint, has been specifically formulated to block damaging UV light. Harvel EnviroKingUV™ is patent pending.

Accepting for F.W.Webb (left to right): John Romano,Vice President of Plastics Sales; Jessica Garvey, F.W.Webb Inside Sales; Joe Durning District Manager, Asahi/America; and Steve Perkey, F.W.Webb Outside Sales.

 2551 magmeter flow sensor

“EnviroKingUV™ was developed to meet the demands of innovative technologies and emerging green industries,” says Bill Weaver, Harvel’s director of technical services.“It’s ideally suited for a wide range of outdoor applications including biofuel processing, carbon recycling, process R&D, filtration, and sight glass.”

Harvel EnviroKingUV™ possesses the well-known benefits of rigid PVC such as exceptional corrosion resistance; smooth interior walls for unimpeded flow and reduced sediment buildup; fast, reliable solvent-welded connections; good pressure-bearing capability; and ease of handling and installation, to name a few. All of these important attributes are now available in a unique transparent product with UV stability.

Signet 2551 Magmeters offer many output options of frequency/digital (S3L), 4 to 20 mA or relays which are available on both the blind and display versions. The frequency or digital (S3L) sensor output can be used with Signet’s extensive line of flow instruments while the 4 to 20 mA output can be used for a direct input to PLCs, chart recorders, etc.

Both the 4 to 20 mA output and digital (S3L) sensor interface is available for long distance signal transmission of up to 1,000 ft.

Features • • • • • • •

Bi–directional flow Empty pipe detection Installs into pipe sizes DN 15 to DN 300 (0.5 to 12 in.)

Flow rate range 0.05 to 10 m/s (0.15 to 33 ft/s) Accurate measurement even in dirty liquids Blind 4 to 20 mA, digital/frequency, relay output Corrosion resistant materials; PP or PVDF with SS, Hastelloy C, or Titanium

 LabWaste™ chemical & corrosion resistant cpvc One of the key advantages of LabWaste™ CPVC System is its excellent resistance to a broad range of corrosive environments.

CPVC is inert to most mineral acids, bases, salts and aliphatic hydrocarbons, and compares favorably to other nonmetals in these chemical environments.

• Complete system of pipe, fittings and adapters • All CPVC construction in full assortment of standard DWV patterns

20

• Custom fabricated accessories-drains, neutralization tanks & pump stations • Specially formulated one-step solvent cement provides chemical resistance equal to system pipe & fittings – now in special Yellow color • ULC flame & smoke rated • Non-pressure drainage service to 220°F

F.W. WEBB COMPANY

www.fwwebb.com

Specialists in BioProcessing Components 877.932.2246 • 401.463.4176 • FAX: 401.463.4160 Contact Jim Bodle • www.webbbiopharm.com

Jim Bodle General Manager

Did you know Webb Bio-Pharm repairs pumps?

We have a state of the art pump repair facility where we can fix a pump and run it on our pump stand to assure it meets original factory specifications.

Call us today and try us out!

Crane Company Appoints WEBB BIO-PHARM as the Exclusive Crane Saunders Sanitary Diaphragm Valve Distributor in New England We are pleased to announce that Crane Company has made Webb Bio-Pharm the exclusive Crane Saunders Sanitary Diaphragm valve distributor in the New England Region. Webb Bio-Pharm is dedicated to the Sanitary Saunders product line and will continue to grow our partnership with the Crane Family.

We are looking forward to our continued success with the Crane Saunders line!

For inquiries regarding this product line please contact our Webb Bio-Pharm team 401-463-4176!

 almatec – the biocor series The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and food industry. The air-operated diaphragm pumps are EHEDG certificated and ATEX conform according to 94/9/EG directive. BIOCOR pumps with a material combination of PTFE (diaphragms, ball valves, O-rings) equipped with a diaphragm monitoring are 3-A approved.

The special design with the integrated cleaning-system enables the CIP (clean in place) and SIP (sterilization in place) capability.

Always a demand for sterile applications: all housing parts of the BIOCOR pumps show no horizontal areas. Each pump comes with four ball lifting magnets, which can be attached to the pump housing from the outside at the location of the four ball valves. The ball valves are risen up magnetically out of their seats and the pump is drained entirely without having to be dismounted. There are no mechanical ball lifters with parts and seals in the wetted area.

The two pump sizes B 20 and B 32 achieve max. capacities of 3.5 and 7.5 m³/h resp. a max. discharge pressure up to 7 bar The material for the wetted housing parts is electro polished SS 316 L (1.4435, according to Basel Standard II, ferrite content < 1%) with a surface roughness of < 0.4 µm. The center block is made of polyethylene conductive.

 rubberfab Elasto-Tech Metal Detectable Elastomers

Help Prevent Product Contamination with Cost Effective Solutions As a result of excessive use, shearing and damage can occur to equipment causing undetectable product contamination.

Elasto-tech metal detectable elastomers can eliminate product recall, lower product loss and decrease the risk of elastomers consumed in finished product.

A common problem with component and filler parts is excessive wear and tear. When rubber breaks off a moving part it can migrate through your system and into your product. Searching for the locating fragmented rubber parts is a costly, time consuming and inconclusive process requiring expensive x-ray equipment, manual observation and an extensive maintenance program. Not locating a worn and lost rubber piece can have an even costlier outcome.

By manufacturing a standard elastomer with a metal impregnated compound, displaced rubber material can now be located by an in line detector. This alarm enables your system to instantly reject contaminated product.

Elasto-tech is available in Buna, FKM, Tuf-Steel, EPDM and Silicone.

Meets High Standards: • Elastomers meet Title 21 CFR 177.2600 • Tuf-Steel meets Title 21 CFR 177.1550 • Meets USDA Hazard Analysis and Critical Controls Points • Detectable metal additive meets the latest revision of the Food Chemicals Codex • Animal Derived Ingredient Free

Call Webb Bio-Pharm today for more information on Elasto-Tech Metal Detectable Elastomers or other gasket requirements you may have!

Summer 2010

F.W. WEBB COMPANY

21

HVAC/R & Controls 800.253.7838 • 781.933.1804 • Fax: 781.933.3528

John Thomas Vice President HVAC/R & Controls

At Webb, we recognize the challenges in today’s market and are leading to help our customers navigate through. With stricter regulations, product phase out, higher efficiency requirements, and federal, state and local rebates, look to Webb for our many products to meet all your needs. We thank you for you business and continued support.

 direct coupled electric linear valve actuators

 T600 Series Digital thermostat The thermostat replaces many competitive brands.

The T600 digital programmable and non-programmable thermostats provide advanced temperature control and easy-to-follow menudriven programming. All setup and programming is done at the push of a button by following plain text menus.

The T600 is available in a 7-day, 2/4 event programmable model or a non-programmable model. Each one offers at least 20 configurable parameters. They can control single-stage multi-state, and heat pump units. Plus, the programmable model controls unitary rooftop equipment with economizers.

ML6421/7421 Non-Spring Return ML6425/7425 Spring Return Suitable for use with on-off controllers/ SPDT floating controllers or electronic modulating systems.

 remote temperature controllers

T775 Series

Offers the flexibility of up to four stages ON/OFF, modulating or reset control with digital display and wide set point range.

 Variable Air volume modular assembly

VMA1400 is a configurable digital controller with a pressure sensor and an actuator, housed in a pre-wired unit. Continuous loop tuning through algorithms, automated commissioning, position feedback for enhanced damper position accuracy, advanced diagnostics, N2 network communication and Palm Pilot interface.

 single/dual transmitter input receiver control

RKS1001

 two position actuator MA-5200 MA-5300 Series Series

VSD Series • World’s smallest footprint • Standard copy/ paste keypad (for copying parameters to other drives) • External Fan is removable with no screws (Frames 4 & 5) & Fan can be temperature controlled • EMI/RFI filters & 3 % Line Reactors Standard Local / Remote button on keypad (1 – touch)

 Retrostat kit Converts existing pneumatic room thermostats to Powers 192 Series. Competitor retrostat kits have factory calibrated changeover pressure to match the manufacturer they replace.

 powermite 599 series MZ Series: . Close-off up to 25 psi . Electronic actuators only 0 to 10V fail-in place 24 Vac, 2-position, 3-position control . Low leakage rate (ANSI Class IV)

Please contact your F.W. Webb Sales Representative for more information!

22

F.W. WEBB COMPANY

www.fwwebb.com

HVAC/R & Controls

800.253.7838 • 781.933.1804 • Fax: 781.933.3528

energy saving commercial equipment

 air-to-water heat pumps, chillers

 automatic standby generators

and fan coils The New Color of Green is Blue.

Features: • Less carbon, fossil fuel, LEED points and operation costs • Fully integrated with pump, storage tank, expansion tank and water filter • Quietest fan coils in the world (whisper quiet library 26 decibels vs. 30 decibals)

Business is Better with Power.

Generac’s broad range of choices in automatic standby power allows you to choose enough protection to back up either a few essential circuits or your whole house or business. For 24/7 protection from power outages, trust the #1 selling automatic standby generator.

• Pex, no copper piping • One system: First Stage: Solar Thermal; Second Stage: Aermec; Third Stage: High Efficiency Boiler • Easy start-up – purge and run • Application breadth: Heat, A/C, Radiant, Free Cooling, Ice Melt • Water: No handling of refrigeration, no refrigeration in building, no leaks

For more information, please contact your F.W.Webb Sales Representative.

F.W. Webb is the exclusive distributor of Aermec Air-to-Water Heating and Cooling Products in New England and New York.

 variable refrigerant volume (VRV) system Optimized R410A Design This industry benchmark is the world’s first R410A-operated variable refrigerant volume (VRV) system and represents a considerable advance in efficiency over competitive systems. ❶ Aero Fitting Grille and Aero Spiral Fan ❷ DC Fab Motor ❸ Sine Wave DC Converter

➊ ➋ ➌

➍ ➎

❹ E-Pass Heat Exchanger ❺ Reluctance Brushless DC

Compressor The motor comprises powerful neodymium magnets that generate the reluctance torque.

These magnets are approximately 12 times stronger than ferrite magnets and contribute to its substantial energy-saving performance.

❶ ❷ ❸ ❹

Optimized R410A design: Daiken sets the industry standard

❺

 Large Commercial Rooftops (Y) 25, 30 and 40 Ton York Millennium® Rooftops offer the flexibility to meet the requirements of a wide range of installations.They’re built to last and priced to compete. Numerous options can be added to the base unit to satisfy almost any specifications —from the simple to complex. Units are offered in the following combinations: • Cooling Only • Cooling/Gas Heating (Natural Gas or Propane) • Cooling/Electric Heat • Cooling/Hot Water Heat • Cooling/Steam Heat In addition, these units are designed with the flexibility to support the industry’s best practices for indoor air quality.All these features are available on 25, 30- and 40-ton single-package units that are easy to install, use, and maintain. Factory-installed options, such as economizers, power exhaust, high-efficiency motors or filtration, barometric damper relief, 0° low ambient, high-capacity evaporator coils, and singleunit disconnect, add to the versatility of these self-contained rooftops.

• Double-wall construction with galvanized sheet metal liner to protect against microbial growth.

• Rigid sheet metal inner liner to keep insulation out of the airstream.

• Sloped drain pan protects against pan corrosion and bacterial growth.

• Pitched roof design for natural drainage.

• Scroll compressors for efficiency and durability. Multiple refrigeration circuits for greater turndown and the best unloading capabilities in the industry. connection for BAS compatibility.

• Extended flue connection on gas units to eliminate the possibility of corrosion in the furnace heat exchanger.

• Constant air volume or Variable air volume by inlet guide vanes or variable frequency drive.

• Full range of airflows and static pressures to meet most every application requirement.

F.W. Webb is the exclusive distributor of York Heating and Cooling Systems and Source 1 Parts for New England and Upper New York.

Summer 2010

F.W. WEBB COMPANY

23

HVAC/R & Controls

800.253.7838 • 781.933.1804 • Fax: 781.933.3528

YORK AUTHORIZED FACTORY PARTS

Residential and Commercial Thermostats

Source 1 LX-Series Thermostats

Source 1 LX-Series thermostats are suitable for residential or commercial gas/electric, heat pump, multistage, and hydronic systems. They offer an extraordinarily rich set of features. A variety of matching accessories offer extended functionality to the dealer and the home or building owner.

Features: • Large (4.7 sq in) digital display with soft white adjustable intensity backlight displays current indoor and outdoor (with optional remote sensor) temperature, setpoints, day of week, and time • Adjustable scrolling10-character 16-element marquee text guides through setup and programming steps in plain language and allows customizable service alerts and error messages • Bicolor LED mode indicator and backlit, color-coded soft-touch keys • Programmable models meet Energy Star and California Title 24 specifications • Up to 4 stages heating and 2 stages cooling • Up to 7-day installer selectable programming • Auto changeover (switchable to manual) • Built-in compressor protection (defeatable for zoning applications) • Adjustable timers and deadbands • Auxiliary heat indicator • Auxiliary heat lockout • Fahrenheit/Celsius display • Service filter reminder • UV lamp replacement reminder • Remote temperature sensor ready • Programmer compatible • Wireless accessories • Humidification and dehumidification (some models) • Dual fuel capable (some models) Specifications: Power Method: Hardwired Electrical Ratings: 24 VAC ±15% Frequency: 60Hz; 50Hz Terminal Load: Y1, Y2, G 1.5 A per terminal; all others 0.5 A per terminal Setpoint Temperature Range (heating): 35°– 99°F (1.5°–37°C) Setpoint Temperature Range (cooling): 35°– 99°F (1.5°–37°C) Deadband Differential: 1°–6°F (0.5°–3.0°C) Operating Ambient: 35°–105°F (1.5°–41°C) Operating Humidity: 5–90% RH, non-condensing Dimensions: 4-3/8” H x 5-5/16” W x 1” D Mounting: Horizontal

Residential Models STAGES SOURCE 1 PART NO.

HEAT

COOL

S1-THSU21P1S •

2

1

S1-THSU32P7S •

3 (4 FOR HEATPUMP)

2

S1-THSU32HP7S •

3 (4 FOR HEATPUMP)

2

PROGRAMMING OPTIONS 1-DAY, NONE

CONTROL

TERMINALS

R, C, G, W1/O/B, W2, Y1,OUTDOOR SENSOR,DRY CONTACT, FAULT 7-DAY, 5+2 DAY,1-DAY, MULTI-STAGE HEAT PUMP, GAS/ELECTRIC R, C, G, W1/O/B,W2, W3, Y1, Y2,HUM, NONE DEHUM, AUX,OUTDOOR SENSOR,REMOTE SENSOR,DRY CONTACT, FAULT 7-DAY, 5+2 DAY,1-DAY, MULTI-STAGE HEAT R, C, G, W1/O/B,W2, W3, Y1, Y2,HUM, NONE PUMP,GAS/ELECTRIC,HUMIDIFICATION, DEHUM, AUX,OUTDOOR DEHUMIDIFICATION,REHEAT, AND DUAL SENSOR,REMOTE SENSOR,DRY FUEL CONTACT, FAULT HEAT PUMP, GAS/ELECTRIC

MLP $ 123.21 185.71

232.14

Note: Also available in York, Luxaire, and Coleman brands.

Commercial Models STAGES SOURCE 1 PART NO.

HEAT

COOL

CONTROL PROGRAMMING OPTIONS NON-PROGRAMMABLE MULTI-STAGE HEAT PUMP,GAS/ELECTRIC HUMIDIFICATION, DEHUMIDIFICATION

S1-TBSU22HNS •

2

2

S1-TBSU32P7S •

3 (4 FOR HEATPUMP)

2

7-DAY, 5+1+1 DAY,1-DAY, NONE

MULTI-STAGE HEAT PUMP,GAS/ELECTRIC

S1-TBSU32HP7S •

3 (4 FOR HEATPUMP)

2

7-DAY, 5+1+1 DAY,1-DAY, NONE

MULTI-STAGE HEAT PUMP,GAS/ELECTRIC,HUMIDIFICATION, DEHUMIDIFICATION,AND REHEAT

TERMINALS

MLP $

R, C, G, W1/O/B, W2,Y1, Y2, HUM, DEHUM,OUTDOOR SENSOR,DRY CONTACT, FAULT R, C, G, W1/O/B,W2, W3, Y1, Y2,OUTDOOR SENSOR,REMOTE SENSOR,DRY CONTACT, FAULT R, C, G, W1/O/B, W2,W3, Y1, Y2, AUX,HUM, DEHUM,OUTDOOR SENSOR,REMOTE SENSOR,DRY CONTACT, FAULT

189.29 196.43 239.29

Note: Also available in York, Luxaire, and Coleman brands.

24

F.W. WEBB COMPANY

www.fwwebb.com

Refrigeration 781.272.6600 • fax: 781.275.3354 Contact Kenan Young

 Deep Vacuum Pump

DV-22N

JB Industries’ Platinum™ Series Vacuum pump is the best pump in the industry. This pump was made and designed for the serious air conditioning and refrigeration technician. American made and subjected to JB’s rigorous performance standards, the Platinum™ Series is the top of the line for both quality and durability. Backed by an unprecedented **24 month over the counter warranty, there is no better pump on the market.

Kenan Young Product Manager Refrigeration

With the phase out of Refrigerant R-22, there are many alternatives in the marketplace today. For help with selecting a long term replacement, please contact your F.W. Webb salesperson. As we move further into the refrigeration field, F.W. Webb has furnished many locations with a Sporlan Q bench to better serve you with your thermostatic expansion valve needs.

 Atlas Refrigerant Charging Scale DS-20000 JB is proud to introduce the new ATLAS refrigerant charging scale designed for the HVAC/R industry. Every day users will appreciate the advanced solid state load cell for superior sensitivity (.25 oz/10gm) and accuracy. The ATLAS’s 220lb (100kg) weight capacity, all metal scale construction, heavy duty plastic storage case, and hand held remote combine to make the ATLAS the best overall package in the HVAC/R industry today at a 110lb price.

 Standard chiller builder kit If you need an easy–to–assemble, low side package that utilizes the smallest, most powerful, and most efficient chiller on the market, Standard Refrigeration’s Chiller Builder Kit is what you’re looking for.

• Uses super compact TX chiller barrel • Brand name components • Single or dual circuit options • Available in ranges from two to 30 tons • Entire kit can be assembled in less than one hour • NEW three and four circuit models!

• Ideal for achieving up to 20 tons with single phase compressors.

• Chiller Barrel is now included.

Summer 2010

F.W. WEBB COMPANY

25

Institutional / Property Management 781.272.6600 • fax: 781.275.3354 Contact Dean Plouffe

Dean Plouffe Product Manager Industrial Plumbing

Intellidyne, LLC is the market-leading manufacturer of green, energysaving controls for commercial and residential buildings. Our proven line of heating, air conditioning and refrigeration controls immediately reduces your heating and cooling energy consumption by at least 10%--guaranteed. We offer a complete line of controls for hydronic, steam and forced air heating systems, refrigeration systems and package/rooftop air conditioning units.

Water and energy conservation continue to drive innovation in the development of new products in the plumbing and heating industry. Municipal buildings, hospitals and schools are welcoming “green” products that are consistent with their goals of sustainability.

• UL listed U.S. and Canada, “Energy Management Equipment” • Increased savings without replacing or upgrading costly systems • State of the art microcomputer controller LED or LCD indicators show operating modes • Simple installation by qualified installer • No programming or follow up visits required • Maximum efficiency year round • Reduces maintenance and extends equipment life • Fail safe operation • 15 year warranty for breakdowns or defects • 10-20% energy savings guaranteed • Short payback period

CHS – Commercial Steam Heating System Fuel Economizer

CAC – Commercial Air Conditioning Electrical Consumption Economizer

IntelliCon®-CHS is a microprocessor-controlled, fuel-saving device for commercial steam heating systems. IntelliCon-CHS reduces: fuel consumption, wear on parts, fuel emissions and electrical usage, when installed on any new or existing gas or oil burner. IntelliConCHS saves energy by adjusting the burner run pattern to match the system’s “heat load.” Its action is similar to the industryaccepted method of “outdoor-air temperature reset control,” but does not require an outdoor-air temperature sensor or the need to profile the building in order to adjust the “reset” controller properly. IntelliCon-CHS determines the “heat load” by using an easily installed pressure sensor that monitors the boiler’s steam-pressure and the rate that this pressure is changing.

IntelliCon®-CAC typically reduces Commercial Air Conditioning electric consumption by 10% to 20% or more. The IntelliCon-CAC is a microprocessor-based, UL listed, electronic control that uses intelligent Dynamic Cycle Management (DCM) technology to automatically adjust the compressor cycles to achieve the greatest efficiency and reduced electrical usage, while assuring consistent temperature levels. IntelliCon-CAC is maintenance free, easy to install by a qualified installer, and is guaranteed to save energy.

CHW – Commercial Hot Water Heating System Fuel Economizer IntelliCon®-CHW is a microprocessor-controlled fuelsaving device for commercial hot-water heating systems.

IntelliCon-CHW reduces: fuel consumption, wear on parts, flue emissions and electrical usage, when installed on any new or existing gas or oil burner.

RU – Refrigeration Unit Electrical Consumption Economizer IntelliCon®-RU will reduce electric consumption—typically 10% to 20%—when installed on commercial refrigeration/ freezer (refrigeration) systems. IntelliCon-RU represents a major advancement in refrigeration system energy-saving technology, unsurpassed in today’s commercial refrigeration marketplace. IntelliCon-RU is easily installed by a qualified installer, maintenance free and guaranteed to save energy.

Residential Economizers also available.

26

F.W. WEBB COMPANY

www.fwwebb.com

Industrial Specialties  Knob-type basket strainers

Style BFK-7 Sizes: 1½” – 8” Materials: Ductile Iron, Nickel Aluminum Bronze, Carbon Steel, 316 SS

TYLOK Expansion joint & industrial hose TRAINING

Style SSD-K Sizes: ¼” – 3” Materials: Nickel Aluminum Bronze, Carbon Steel, 316 SS

Style KT-7 Sizes: 3/8” – 3” Materials: Cast Iron

 Duplex basket strainers Style KF-7 Sizes: 10” – 12” Materials: Ductile Iron, Nickel Aluminum Bronze, Carbon Steel, 316 SS

Style KF-7 Sizes: 1/2” – 12” Materials: Cast Iron Available in threaded and flanged ¾” – 8” in materials of Cast Iron, Bronze, Carbon and Stainless Steel.

We can fabricate to any size and material!

F.W. Webb Woburn Holds Trade Show/Training Day for Tech School Students Eddie Giacchino a salesman at F.W. Webb Company in Woburn who is very involved with community services and volunteering his time with local education wanted to have this platform for the kids in the tech schools.

“We had over 15 manufactures representative’s attended and sponsored the program with F.W. Webb Woburn. Eight schools bussed in students with a total of over 200 kids by the time it was over. They could interact with F.W. Webb employees, customers and manufactures. Learning to understand there roles in the industry, asking questions and even seeing first hand some of the latest in product and opportunities. It was well worth it, and we had a lot of fun.” - Ed Giacchino, Salesman F.W.Webb

Chris DiPirro, General Manager of the Woburn branch, speaking to students from area Tech schools.

There were also group tours of Webb’s Woburn facility with a Q&A forum with Webb’s management. It didn’t stop there! Immediately following was an outdoor barbecue for the kids.

“This is a great industry and these kids are the future of it. Along with install and service, there is also management, sales, manufacturing, purchasing, distribution, etc. They’re getting a lot of good information and seeing first hand the opportunities ahead of them. A trade show for the tech kids. They had a ball and so did we.”

– Christopher DiPirro, G.M F.W.Webb “Thanks for inviting our school, Northeast Metro Tech, to your career day at your Woburn location. My students enjoyed talking to everyone and the tour of the facilities. Again thanks for the invite and the BBQ lunch the kids enjoyed it!!!!”

– Michael Zolotas Northeast Voc.school and long time Webb customer.

Summer 2010

Tech school students and F.W.Webb staff. at the outdoor barbecue.

Eddie Giacchino, F.W.Webb salesman held this platform for the kids in the tech schools.

F.W. WEBB COMPANY

27

Industrial Specialties

Steam Heat Exchange Solutions

For more information, please contact your local F.W. Webb sales representative.

ď Ź forged steel fittings Phoenix *Capitol domestically manufacturers a full line of forged steel fittings and unions along with branch connections marketed under Trans-O-Con. All Phoenix *Capitol products are produced to the latest ASME, ANSI and ASTM specifications and adhere to existing Approved Manufacturing Lists.

Multi-Surface Medium Duty Broom CPFGX40204

Heavy Duty 2-Shelf Utility Cart CPFG452088

Brute Container Dolly / Black CPFG264000

Brute 44 gal. Container / Gray CPFG264300

28

F.W. WEBB COMPANY

www.fwwebb.com

Tools K-45 & K-45AF Drain Cleaning Machines The K-45 family of drain guns are the professional’s choice for cleaning small secondary drain lines from ¾” to 2½”. Available in manual and AUTOFEED versions, each provide you with: • Variable Speed Operation – Fully variable from 0-600 RPM to give you complete control in every situation • Leak Proof – Inner drum prevents leakage to keep job site clean • Other Features: – Quick acting slide chuck to lock cable.

– Inner drum design virtually eliminates cable flip-over in the drum and allows for quick cable change out – Premium quality, compression wound inner core cable combines strength and flexibility to resist kinking K-45AF – AUTOFEED The Advanced 2-Way AUTOFEED lets you clean drains better and faster than ever before – keeps hands off cable and gives you total control to completely work through blockages and retrieve obstructions.

• Reduce Job Time by 15% – Advance and retrieve cable without stopping to reverse the motor • Better Results – Quickly work back and forth through the blockage to completely clear the line.

Specifications Motor Rating...............120V, single phase, AC, 3.2 amp, 50/60 Hz. Operating Speed……………0-600 RPM Drain Line Capacity………..¾” – 2½” Drum Capacity………..50’ of 5/16” 35’ of 3/8” Weight w/C-1IC Cable…………12.6 LBS (K-45) 13.8 LBS (K-45AF)

 M12 PVC SheaR 2470-21 M18 Hackzall kit

2625-21 • One-handed design provides superior control and versatility over a standard reciprocating saw • Compact size allows for cutting in tight spaces, and light weight makes overhead work easier • QUIK-LOK® Blade Clamp offers fast, easy tool free blade changes for SAWZALL® Blades & HACKZALL® Blades • Built-In LED light illuminates the work surface while cutting

 M12 no-hub driver 2455-22 • Specific torque settings for 60 and 80 in-lbs • Auto shut-off w/LED indicator • LED calibration indicator • 0-750 RPM drill mode • M12 Lithion Ion battery pack • Compact lightweight design

Summer 2010

• Powerful Mechanism – Cuts up to 2” schedule 40 PVC in 3 seconds • Ultra sharp blade with Pierce Point – No burrs or shavings to remove • Offset Blade – Cuts PVC / PEX in-wall, inground, or close to wall • Quick Return Blade – Increased productivity during repetitive cuts • All Metal Planetary Drive – Delivers over 200 cuts per charge • Stainless Steel Blade and Aluminum Jaw

 Laser temperature gun 2266-20 • Surface Temperature Measurement from -20 to 932°F (-30 to 500°C) • 12:1 Distance to Spot Ratio • User configurable Hi/Low alarm settings • K-type thermocouple input for contact temperature • Hold, Max Value Functions • Slide rail for mounting 2201 Voltage Detector with Work Light • 0.95 fixed emissivity

1¾” SDS MAX Rotary

hammer 5426-21 • 14 Amp, 1.300 MWO motor that provides optimal power for the toughest concrete drilling and demolition applications • 8.8 ft/lbs of impact energy combined with 450 RPM and 2,840 BPM, this hammer delivers fast drilling and hard hitting performance • AVS Anti-Vibration System, mechanical clutch, and advanced electronics provide ease of use and overall long-term durability for the user

 clamp gun for HVAC/R

2236-20 • Measures up to 600 amps AC, large 1.30” jaw opening • Thin Jaw Profile for easier wire measurement in panels or in bundles • Wide Voltage range to 600 AC/DC volts • True-RMS for accurate measurement in all applications • Built-In Voltage Detector and LED Work Light

F.W. WEBB COMPANY

29

Tools/Safety Spring-Loaded Tubing Cutters Everyone needs a handy cutter (or two) like Reed’s Spring-loaded Tubing Cutters. This easy-to-grip cutter easily snaps on to copper tubing for a quick, clean cut.

Features: • Snap and turn for quick, easy cuts on copper tubing • Spring-loaded cutter wheel self-feeds with consistent pressure as the tool is turned around the tubing • Great for low clearance areas since the compact c-shape requires no handle swing space • Replaceable cutter wheel Pipe Capacity: Nominal in 1", 1/2" and 3/4"

30

F.W. WEBB COMPANY

www.fwwebb.com

Safety

Summer 2010

F.W. WEBB COMPANY

31

Presorted Standard US Postage Paid Permit No. 12 Bedford, MA

F.W. WEBB COMPANY 160 Middlesex Turnpike Bedford, MA 01730 www.fwwebb.com We Honor:

F. W. Webb is a participant in American Express’s Corporate Procurement Card Program.

F. W. Webb Company is in no way responsible for any printing errors, omissions or typos in the WinSheet.

10 Reasons To Do Business With F.W. WEBB

Through www.fwwebb.com to WebbConnect, you can: Place Orders • Get Pricing • Check Inventory Evaluate Heat Loss/Gain • E-mail

73 Convenient Locations MAINE Augusta 800-322-4700 Bangor 800-432-7371 Biddeford 800-443-0505 Caribou 800-339-3029 Ellsworth 888-882-9322 Lewiston 800-252-2000 S. Portland 800-482-0791 Rockland 800-287-0015 West Bath 800-427-7990 Winslow F. W. Webb 800-640-9322 Kennebec Supply Kentrol/Sevco 800-533-1172 RHODE ISLAND Cranston 800-795-6390 Webb Pump 866-850-7867 Webb Bio-Pharm 877-932-2246 Warwick 888-225-6850

MASSACHUSETTS Auburn 800-872-0211 Bedford 800-221-9322 Bellingham 508-966-4999 Boston 617-482-8387 Brockton 800-544-9322 Canton 781-828-5559 Dedham 800-820-9322 Fitchburg 800-322-0899 Gloucester 978-283-7800 Greenfield 800-564-3644 Haverhill 800-521-7499 Hingham 781-749-9322 Hyannis 800-352-3159 Lowell 800-642-9322 Malden 800-963-7111 Methuen 866-548-9322 Utilities Supply 800-343-7555

New Bedford Babbitt 888-354-0048 Northampton 800-282-7721 Pittsfield 800-578-9322 Plymouth 508-830-0125 Salem 800-345-5025 Springfield 800-660-3141 Sturbridge - Pipe Depot 508-347-3342 Woburn 800-253-7838 NEW HAMPSHIRE Concord 888.508.0050 Dover 800-582-7196 Exeter 888-993-9322 Gilford 800-345-1771 Keene 800-235-1218 Lebanon 800-322-8707 Madison 800-852-9203 Manchester 800-789-6488 Nashua 800-462-1440

NEW YORK Albany 800-432-9322 Binghamton 888-593-9322 Cazenovia 315-655-9700 Clyde 800-828-8824 Newburgh 877.494.9322 Plattsburgh 800-622-9322 Queensbury 800-826-0326 Syracuse 800-262-9222 Utica 315-724-3191

VERMONT Barre 800-244-5044 Bennington 800-821-9506 Brattleboro 800-821-9511 Rutland 800-622-4365 Springfield 800-872-5303 St. Albans 800-696-3763 St. Johnsbury 800-872-8028 Williston 800-696-0340

CONNECTICUT Franklin 888-642-9086 Hartford 800-252-9322 Hartford – Victor 800-243-9360 New Haven 800-636-7524 Waterbury 800-572-6479

F.W. Webb is a member of the following associations: A-D (Affiliated Distributors), ISPE, TAPPI, NECCARAPA, MCAA and MHEC.

For questions or comments, please email Carol Rosinski (Production Manager) at crr@fwwebb.com.

1. We Care.

2. Our relationship with our customers matters most.

3. The profitability of your enterprise is priority one.

4. If on occasion our quality products cost more, they will be worth it.

5. The manufacturers that we represent share our values and commitments.

6. No order is worth more than our or your reputation.

7. To insure that when you ask, “What’s new?” we have the answers.

8. Product application is prioritized by safety considerations over price.

9. Our people are accessible, accountable and trained to respond reliably every time.

10. Webb is a privately owned company which means that the buck stops here.

Thank You! John Pope, CEO • jp@fwwebb.com Jeff Pope, President • jsp@fwwebb.com