WinSheet - Spring 2009

F.W. WEBB COMPANY

Sheet

The Webb Industrial News is a Quarterly Catalogue of F.W. Webb Company

VALVES / AUTOMATION

PIPE / TUBING / FITTINGS / FABRICATION

WINTER SPRING2007 2009

HVAC/R EQUIPMENT / CONTROLS

FELKER Wheatland

PLUMBING

INDUSTRIAL SPECIALTIES

PUMPS

ARMSTRONG

In This Issue: The Leader in Single Source Distribution.. 2

Pump Sales/Service/Repair.............. 14

Institutional/Property Management.... 25

Pipe & Tubing.................................... 3

Webb Kentrol/Sevco...................15-17

Industrial Specialties....................26-28

Valves............................................4-8

Plastics.......................................18-19

Tools..........................................29-30

Hose.................................................. 9

Webb Bio-Pharm.............................. 20

Safety.........................................30-31

Webb Piping Solutions..................10-12

HVAC/R & Controls....................21-23

Fire Protection.................................. 13

Refrigeration.................................... 24

The Leader in Valves/Automation • Aloyco Stainless Valves

• American Iron Ball Valves • Apollo Ball Valves • Asahi Ball & Butterfly Valves • Asco Solenoid Valves • Babbitt Chain Operators • Centerline Butterfly Valves • Conbraco Safety Relief Valves • Crane Valve • Crosby Safety Relief Valves • DFT Check Valves • Edward Steel Valves • Flowseal Butterfly Valves • Habonim Ball Valves • Hayward Valves • Inline Ball Valves • ITT Engineered Valves Cam–Line, Cam–tite, Dia–Flo Diaphragm Valves Fabri Knife Gate Valves, Skotch Trifecta • KTM Metal Seated Ball Valves • Masoneilan • Nibco Valves • Rego LP Gas Valves • Resun Plug Valves • Richter Teflon–Lined Valves • Sharpe Ball Valves • Strahman Sampling Valves • Velan Forged Steel Valves • Victaulic • Vogt Forged Steel Valves • Watts Backflow Devices • Xomox Plug, Ball & Butterfly Valves • Zook Rupture Disks and Accessories Pipe & Fittings • Ameron Bondstrand Fiberglass • Capitol Forged Steel Fittings­ • Cerro Copper Tube/Brass Pipe • Dresser Couplings & Repair Clamps • Felker Stainless Steel Pipe • Flex–Hose Connectors & Exp. Joints • Forged Steel Fittings • Harvel Pipe • Kee Klamp Rail Fittings • Transair Fittings • PVC/CPVC – Fittings – Chemtrol, Spears – Pipe – Charlotte, Harvel • Resistoflex Teflon–Lined Pipe • Skinner Emergency & Repair Clamps • Tylok Compression Fittings • Victaulic • Viega ProPress Copper Fittings • Weld Bend Fittings • Wheatland Carbon Steel Pipe • Zurn Acid Waste Pipe

2

“Single Source” Distribution

Pumps • Armstrong Commercial

• • • •

• • • • •

Dean High Temperature Grundfos Commercial/Industrial Gorman Rupp ITT Goulds Aquavar, Aquaforce, Goulds G & L, Goulds Vertical Turbine Pumps, Goulds Water Systems, Marlow Myers Reciprocating Summit End Suction, Self Priming Taco Commercial/Industrial Versa–Matic Diaphragm Zoeller Effluent, Sewage

Industrial Specialties • Ashcroft Gauges & Thermometers

• • • • • • • • • • • •

Barco Rotary Joints Bauer Ladders C/M Hoists Gates Hose & Fittings Keckley Strainers Krylon Aerosol Paints Lyon Shelving, Lockers Nycoil Permatex Pipe Hangers/Insulation Skillers Gloves & Protective Clothing Viking Sprinkler Heads

Bio–Pharm

• • • • • • • •

Alfa Laval Fittings, Pumps Ashcroft Gauges Crane Saunders Diaphragm Valves Habonim 3 Piece Ball Valves Newman Sanitary Gasket Resistoflex Spirax–Sarco Clean Steam Trent Tube

HVAC/R – Steam • 3M Industrial Adhesives & Tapes

• • •

• • •

•

• •

F.W. WEBB COMPANY

Airco Furnaces Barnes & Jones Cage Units Beacon Morris Commercial Fin Tube/Unit Heaters Bell & Gossett Chandler Evaporators Comfortaire Window Air Conditioners/Dehumidifiers Comfortmaker Air Handlers/ Air Conditioning Equipment Daikin Air Conditioning Units Danfoss Valves

HVAC/R – Steam • Grid Cast Iron Unit Heaters

• • • • • •

• • • • • •

Honeywell Invensys – Siemens, RobertShaw Johnson Controls Laars Commercial Water Heaters Modine Unit Heaters Peerless, Weil–McLain, Columbia Boilers Siemens – Landis, Powers Source 1 Parts Authorized Parts Spirax Sarco Steam Specialties Steam Coils/Hot Water Coils Tecumseh Compressors York Heating and Cooling Systems

Plumbing • American Standard Fixtures

• • • • • • • • • • • • • •

Bobrick Partitions/Grab Bars Bradford White Water Heaters Bradley Wash Fountains Chicago Institutional Faucets Cuno Water Filters Elkay Drinking Fountains Grohe Haws Emergency Eyewash Jacuzzi MacClean Water Conditioners Sloan Flush Valves & Parts Speakman Emergency Showers T & S Brass Toto Fixtures & Faucets

Tools • Craftsman

• • • • • • •

Knaack/Weather Guard Lenox Saws/Blades Milwaukee Power Tools Rayovac Flashlights/Batteries Reed Pipe Tools Ridgid Tools/Pipe Machines Turbo Torch

Value Added Services

• • • • • •

• •

Pipe Fabrication/Fire Protection Haws Plant Safety Survey Pump Service & Repair Safety Relief Valve Repair Single Source Solutions Steam/Water/Energy Conservation Valve Automation VMI – Vendor Managed Inventory

www.fwwebb.com

Webb Has All Different Types of Pipe/Tubing 1/8” to 120” and Larger!

• Carbon • Stainless

• Aluminum • Copper

Pipe & Tubing

• Cast Iron • Brass

• Plastic • Fiberglass/Epoxy

 Stainless Steel Pipe

 Steel Pipe & Fabrication

304/L & 316/L Stainless, Schedules 5, 10, 40, 80

Wheatland • US Steel • Sharon Tube Charlotte • Cerro

• 1” – 36” • Flange, bell, roll groove and configurations • Stock sizes in 20’ lengths • Special lengths available

F.W. Webb Company has the largest pipe inventory in the Northeast.

Our fabrication shop is capable of cutting, threading, and grooving through 12” pipe. When you call F.W. Webb, a professional inside sales force will handle your orders and questions. We can fabricate for immediate delivery and have 1/8” – 24” pipe in stock.

Continuous Production • 2”– 8” in schedules 5, 10, 20, and 40, Lengths up to 60’

Batch Production • 10”– 60” in schedules 5, 10, 20, 40, and 80, lengths up to 48’

All Sizes and Schedules 1/8” − 24” In Stock

 Soil Pipe

Our Pipe Depot Stocks...

Copper Tubing/Coils / Carbon Steel Pipe

 CERRO Copper

• Domestic A53 CW, ½” – 4” Sch n end, 1/8” – 4” in black T&C, ½” – 4” in Galvanized T&C ½” – 4” in Sch 80 in black plain end, 2½” – 4” in Sch 40 groove x groove • Domestic A53 ERW, 2½” – 30” Sch 40 & standard sizes • Domestic A53 ERW, 8” – 16” in light weight ranges • Domestic A53 ERW, 6” & 8” XH black plain end • Domestic A106 Seamless, ½” – 2” in Sch 40 & 80 • Imported A106 Seamless, ½” – 12” Sch 40 & 80

Stainless Steel • Domestic 2”– 12” Sch 10 304L – A312, 316L – A312, 304L – A778 (3”), 316L – A778 (3”, 10”, 12”) • Victaulic Sch 5 for Pressfit

Tubing/Coils

Cast Iron Soil Pipe & Fittings

Lengths & Coils Webb has inventory of over onehalf million lbs. of copper tubing from ¼” to 6” in diameter.

PVF • Plumbing • Sprinkler • HVAC • 100 customer service persons • 200 delivery trucks • Dedicated account manager • $90,000,000 inventory • Product application specialists • 24-7-365 • Hard to find products • Professional submittals • 65+ branches

• Job usage reports • WebbConnect, On-Line access (www.fwwebb.com) • Expediting • On time . . . Accurate . . .

Complete Deliveries • More products & services less hassle • Project pricing

PVC/CPVC – HARVEL Spring 2009

F.W. WEBB COMPANY

3

 82-200-F1 Full-port medical gas ball valves

Bronze Three-Piece

1/2” – 4”

Apollo® is introducing a new series of three-piece bronze ball valves designed specifically for use with oxygen and other medical gases such as carbon dioxide, helium, lung gases, nitrogen and nitrous oxide. The new valves are designed for easy solder or brazed installation without any disassembly. Also, the ball valves are in-line repairable.

• Solder End, 600 psig WOG, Cold Non-Shock • Vacuum Service to 29” Hg • MSS SP-110; Ball Valves Threaded, Socket Welding, Solder Joint, Grooved and Flared Ends • Cleaned for Oxygen Service per CGA G4.1 & NFPA 99 Features: • Full port configuration • RPTFE seats and seals • Blow-out-proof stem design • Adjustable packing gland • Gage ports on the brazed extensions available

 3-Piece, Full Port, 1500 Ball Valves 83A Carbon Steel and 86A Stainless Steel Fully rated in every size: ¼”, 3/8”, ½”, ¾”,1”,1¼”, 1½”, and 2”.

Gland plate adjustable without removing actuator.

• Three-piece full port enclosed stainless steel bolts • Swing-out center section • Pressure-balanced solid ball • Anti-blowout bottom entry stem design • Anti-static ground ball and stem • Lockable in open or closed position • Fully machined ISO 5211 mounting • Cast bosses for bleed and drain ports • Vacuum service to 29 in of Hg • Meets NACE MR0175 (2000 edition) • Steam rated to 150 WSP • Adjustable multi piece “V” style packing • Unfilled FDA compliant, enhanced PTFE seats are standard

1/4” – 2”

100% American Made

4

F.W. WEBB COMPANY

 AE Series electric actuators

AE Series

Ruggedly built and designed for easy installation, new Apollo® AE Series electric actuators deliver the most standard features and performance in their class– for a surprisingly low price. Five output torques, one housing 200, 400, 600, 800 and 1,000 inchpounds.

Description • Long service life • Newly developed anodized die cast aluminum housing • Fiberglass reinforced nylon cover with UV stabilizers resists corrosion • Nitrile gasket & seats cover all penetration points in housing and cover • Precision cut and heat treated alloy spur gears • Permanently lubricated enclosed gear train • Stainless steel push-and-turn manual override shaft, position indicator shaft and female • SO 5211 F07 drive output reduces inventory of mounting kits • 115 AC, 220 AC and 24 AC – all AC models feature a 25 duty cycle below 100°F • 12 and 24 DC – all DC voltage models provide 100% duty cycle Operates from -40°F (when equipped with heater and thermostat) to 150°F • Actuators can be ordered with 1, 2 or 3 additional limit switches • For low temperatures: actuators can be equipped with a thermostatically controlled heater element • Motor brake is necessary with mounting actuator to a butterfly valve • Positioner 4-20mA (360° potent 10 meter)

 mini Ball Valve

1/8” & 1/4”

94 MBV The Mini Ball Valve is designed for steam, water, oil or gas in commercial and light industrial use. The mini-valves are a competitive, conventional port, constructed of heavy-duty forged brass. 100% Teflon® seats and gland follower with double viton o-rings, to prevent stem leakage. The valves are equipped with2”a ”— reversible handle for tight space applications. The valve 1/2 connections are manufactured in accordance with ANSI B1.20.1. The valves are pressure rated to a maximum of 600 psig at 100°F. Rated service temperature ranges are from -40°F to 300°F. Description • Reversible handle • Rugged forged construction • Greater flow rate • Blow out proof stem • Double Viton O-rings • Large raised wrench flats • Chrome plated brass ball • Each mini is air-tested twice: in the Model # Size (inches) open and closed position 94MBV01 1/4 FNPT x 1/8 MNPT • Use as a non-leak gauge cock/test cock 94MBV02 1/4 FNPT x 1/4 MNPT • Perfect for O.E.M. applications 94MBV03 1/4 FNPT x 1/4 MNPT 94MBV04

1/8 FNPT x 1/8 MNPT

94MBV05

1/8 FNPT x 1/8 MNPT

www.fwwebb.com

ITT Engineered Valves Delivering high quality, innovative flow control solutions for Abrasive Wear Resistance, Corrosion Resistance, and Critical/Hazardous Containment in a wide range of industries worldwide.

Dia-Flo Key Application: Demineralization A Glance at Demineralization The functionality of the demineralizer — the ability to make water ultra pure — is designed not only for water to be consumed by people and animals but also for water to be used in industrial machines. These sorts of machines require water that is very much pure water and very little else, and the demineralizer provides this. The more minerals that are in water that travels through pipes and equipment, the more those minerals tend to attach themselves to the pipes and equipment resulting in corrosion. A demineralizer helps avoid this sort of pipe problem by removing impurities such as magnesium and calcium that would foul process equipment such as heat exchangers, turbines, and piping. Systems may vary in design, but they all follow the same basic process steps: Demineralization, Backwash, Regeneration, and Rinse.

Dia-Flo diaphragm valves have been proven the most reliable design for demineralizers for more than fifty years. The demineralizer process purifies water by the Ion Exchange method, reducing the amount of ions in the salt solution.

Ions naturally occur in water in the form of dissolved mineral salts. Condensate polishing is an ion exchange method used to remove trace contaminants, both dissolved and suspended from high purity water.

Why Dia-Flo for Demineralizing Systems?

• Reliable long term life • No packing glands to maintain • Easy in-line maintenance and low cost of ownership • 50+ years of proven service for demineralizers • Modulating and control capabilities The plastic lined weir body diaphragm valve is the valve of choice because of its clean and versatile design, and ease of operation.

Tefzel® lining is typically used in the regeneration of cation resins, which involves the handling of hydrochloric acid or sulfuric acid.

Polypropylene lining is used in caustic solution and in the balance of the piping system.

Diaphragm valves are automated with either double-acting or spring-opposed pneumatic diaphragm type actuators.

The actuators are generally specified with adjustable opening stop (rate-set) and open/closed limit switches for remote position indications. Two types of external corrosion protection are available: White epoxy and PVDF coating. These coatings are applied to exterior and interior surfaces of the valve before assembly.

Tefzel® is a registered trademark of Dupont.

NOW AVAILABLE – New Connection for Skotch® Trifecta T500 Oil Valves ITT is pleased to announce T500 Skotch oil valves are now available with ½” socket welded union end connections.

We have received numerous customer requests for socket welded union end connections, and have added this end connection to the Skotch product offering.

Now there is a quick disconnect option for the ½” oil valve .

The new socket weld union ends will allow users to easily disconnect Skotch valves for repair or maintenance.

Presently, the new socket welded union ends are available only on the ½” size; however, other sizes are available on request.

Spring 2009

F.W. WEBB COMPANY

5

Valves

To avoid the AFTER WHAT – switch to Flexitallic.

Gasket failures can lead to system downtime and serious environmental impact. As the industry leader, Flexitallic Spiral Wound Gaskets are consistently manufactured to exacting engineering standards.

They’ll stand up to the toughest temperature and pressure conditions, they’re resistant to virtually all corrosive and toxic media, and you get the same high quality gasket on time, every time.

Gasket specifications should be reviewed and updated every 2 years. Call F.W. Webb today for a gasket consultation to make sure you are specifying the most reliable gaskets.

6

F.W. WEBB COMPANY

www.fwwebb.com

Valves Crane and F.W.Webb Company provide valves that have stood the test of time.

Whether it’s Bronze Valves, Iron Valves, Cast Steel, or Butterfly Valves, you can rely on the most experienced team in the Northeast to make your valve selection easy.

 Bronze Valves

 Cast Steel Valves

Gate • Globe • Angle • Check

Gate • Globe • Check

• Class 125 – 300 • Flanged, Threaded, & Solder Ends • Screwed & Union Bonnet • MSS-SP-80 • Commercial & Industrial Grade • Rising & Non-Rising Stem • ASTM B61 or B62 Body • Stainless Steel, Bronze, or Teflon Disc • UL/ULC/FM listed valves

• Class 150 – 600 • Sizes 2” – 24” • Flanged and Butt-Weld Ends • Bolted Bonnet • Swing, Tilting Disc and Stop Check • NACE & Special Trims (i.e., 316 SS, Bronze, Monel) • API 600

¼” - 3”

 Stainless steel valves

• Class 150 – 600 • Threaded, Socket-Weld, & Flanged Ends • Bolted & Screwed Bonnets 316 SS, 316L SS & Alloy 20 Material Standard • Special Materials (Hastelloy C, Monel, 304 SS, & more) • API 603, MSS-SP-42

Over 150 years of experience and reliability you can count on at every turn.

 center line

 FLOWSEAL

Resilient Seated Butterfly Valves

High Performance Butterfly Valves

• Rated to 200 & 285 PSI shut-off • Wafer and lug body style • Series 200 Cast or Ductile Iron • Series 225 – 285 PSI shut-off • Series 250 – Carbon or Stainless Steel • Series 300 – Direct Drive • Series 800 fully elastomerlined check • Automated valves: pneumatic, electric, hydraulic Center Line Valves are well-suited for low pressure applications, providing dependable service for air and water in snow making pipelines.These valves are easily replaced in the field.

• ASME Class 150, 300 and 600 • Wafer and Lug body style • Soft seated; zero leakage • Metal seated; ASME Class IV leakage • Fire safe; meets API 607, Rev. 4 • MSS-SP-68 • Automated valves: pneumatic, electric, hydraulic • Lug body valves suitable for dead-end service in either direction The patented Flowseal soft-seat design provides bubble-tight shutoff and provides unparalleled service in vacuum- to low-pressure ASME Pressure Classes 150, 300 and 600 applications.

2” - 48”

2” - 48”

2” - 24”

 Duo-Chek® High Performance Check Valves • Class 125 – 2500 • Lug, wafer, double flanged, and extended body style • End connections: Raised face, Plain face, Ring joint, Weld end, Hub end, Flange connections • Resilient and metal seal materials • API-594 • Cast Iron, Ductile Iron, WCB Cast Steel, 316 SS, all alloys Provide superior backflow and water hammer protection for pumps in snowmaking systems.

2” - 72”

Spring 2009

F.W. WEBB COMPANY

7

Valves

built for the tough jobs.

The Check Valve Doctor Process Down?

Another call in the middle of the night?

Do you know how much your check valve is costing you?

Poor check valve performance results in unnecessary downtime and expensive maintenance. You have bigger problems than a check valve to worry about! Eliminate water hammer, protect your pumps and prevent unnecessary maintenance—use DFT flanged check valves.

GLC - rugged, short F-F

Excalibur - ANSI F-F

Satisfy your Customers’ most demanding long-term steam & hot Water needs.

Count on smiling customers everywhere from commercial laundries and dishwashers to manufacturers of commercial cooking equipment. The Series 8220 steam and hot water valve from ASCO is the hottest new thing in its class.

Its high-flow design provides unequaled throughput, with up to 60 percent more flow. Its ultra-reliable construction endures the rigors of steam and hot water service up to four times longer than other valves. It even reduces inventory by eliminating the need for separate valves for steam and hot water service. Use the Series 8220 to satisfy nearly every steam and hot water application you’ve got!

Please contact your local F.W. Webb representative for more information.

Ask your F.W. Webb representative for more information.

8

F.W. WEBB COMPANY

www.fwwebb.com

Hose Contact Peter Marshall, Gary Rose or Mike Costa: 800.795.6390

Peter Marshall

F.W. Webb represents Gates Rubber Industrial and Hydraulic hose product as well as many other premium hose and tubing manufacturers, such as Crane Resistoflex, Parker-Dayco, Parflex, HBD Thermoid, Tygon, Flex-Hose, Fingerlakes, Pacific Echo, Flexaust and many others. We have a product, price and service that will fill all of your hose and tubing needs.

F.W. Webb’s Hose Division can make custom hose assemblies specific to the customers’ needs.

 C14 PTFE Hose (sae 100R14 type a & SAE 100R14 type b) A great problem solver for difficult applications, such as steam lines, hot air compressor discharge, hot oil lines and many others. F.W. Webb will custom make hose assemblies to your specifications.

Type-A nonconductive is white, smooth bore PTFE; type-B conductive is black & white smooth bore PTFE. Conductive type is designated with “C14CT” nomenclature.This hose is excellent for most air compressor discharge, oil, fluids different variety, or

anything with hot and greasy applications. Furthermore, this hose is excellent for both impulse and non-impulse designs.

Temperature range: -65° F to +400° F @ dynamic.

-65° F to +450° F @ static.

SPECIFICATIONS

Gates is an engineered system of hose and fittings designed to be used together for top performance, and a long, safe, service life.

Take 5 toGet 5!

Take 5 minutes to consider us on your next expansion joint order & get 5% off!

• Guaranteed 24 hour response Large to your quote request Invento ry for • 2 week standard delivery Im Please reference promo code FW0409

Spring 2009

mediat Shipme e nt!

F.W. WEBB COMPANY

9

Pipe Fittings/Webb Piping Solutions Gary Rose General Manager Piping Products

Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

Crane Resistoflex and Crane Xomox: You’rE Single Source for Your Most Difficult Corrosion Applications.

 hydro-pro 150° QC Spray Nozzle The Hydro-Pro 150® offers the unique combination of heavy duty performance and lightweight handling.

Standard Features: • Light weight means less operator fatigue

 xomox® tufline fully lined plug valves

• These valves are more versatile, and often out-perform alloy valves • More economical than alloy valves • With FEP and PFA lining, cast, dovetail recesses and machined grooves lock the lining to the valve body casting. The locked-in lining is virtually impervious to shrinking, stress-cracking, collapse, 2-way fully lined or blowout plug valves • Unlike alloy valves, there is no need to inventory different valves for various applications • There is less chance of costly and dangerous installation errors.

• Media contamination is prevented • Positive shutoff • FEP and PFA locked-in lining

• Patented locking trigger mechanism provides for several spray patterns • Stainless steel body offers strength and durability • Cover design keeps nozzle cool in your hand even when using 200°F water • Wear-resistant nylon cover • Reduces chance of misdirected spraying • Available in black, red or white • Repair kits available NOTE: Intended for water use only . . . not suitable for steam service. Renewable rubber cover available.

 Automatic water saver spray nozzleS

Xomox® valves are lined with DuPont™ Teflon® fluoropolymer.

3-way fully lined plug valves

 xomox® XLD lined Butterfly valves Resistant to permeation, Xomox® XLD offers safety and extended product life. Xomox® XLD process butterfly valves have robust liners: The wall thickness in the flow area is a minimum of 3 mm (PFA) and 4 mm (PTFE), offering a high level of operational safety, as media permeation is considerably slower compared to thinwalled standard liners.This feature allows increased up-time and enables a longer effective product life – which translates into a safety and a cost advantage.

The integrity of the lining is reaffirmed by subjecting it to a 20,000 Volt electrical defect detection test. Xomox®XLD butterfly valve features lower (breakaway) torque compared to other products currently available in the market.

The Cost–Effective Way to Fight

Crane Resistoflex / Crane Xomox now give F.W. Webb the capability of offering the complete Crane package for corrosion–resistant plastic–lined pipe, fittings, and valves. The economical alternative that combines the mechanical strength of steel with the chemical resistance of an engineered plastic. Why live with the constant maintenance and replacement of inexpensive materials or the outrageous price for alloy piping?

10

F.W. WEBB COMPANY

F.W. Webb and Webb Piping Products Division is committed to finding customer solutions. New and innovative products like Transair and Lok Ring help customers cut installation time and cost with unique installation protocol.

Crane Resistoflex and Xomox offer cost-effective alternatives to exotic alloys in chemical process piping. Also call us for Strahman and Gates Rubber— two names you can trust to handle wash down, hydraulic and industrial hose requirements.

M-70 Series: Water Stream Releases the Right Amount of Water and Provides Automatic Shutoff S-80 Series: Solid Stream Only Nozzle F-90 Series: Soft Spray Only Nozzle M-70, S-80 and F-90 Series: • Special nozzle for food grade service available • Available all stainless steel Maximum Working Pressure: 150psi(10.3BAR) Maximum Recommended Operating Temperature: 200°F(93°C) Flow Rates: - 5-7gpm(18-26lpm) under normal conditions (50-80psi) - 0 gpm (37 lpm) Max at 150 psi • Repair kits available NOTE: Intended for water use only . . . not suitable for steam service.

Renewable rubber cover available.

Corrosion F.W. Webb Company uses only Resistoflex–lined pipe and fittings and are the only factory– authorized distributor in the Northeast. Our Conrac Machine allows us to fabricate custom spool pieces for Resistoflex piping systems up to 8” diameter.

Our factory–trained personnel located at our Cranston, RI facility are here to serve you with years of experience and are knowledgeable in lined piping systems. Webb is the only exclusive authorized stocking distributor with the inventory and personnel dedicated to serve you for all lined product requirements.

www.fwwebb.com

Pipe Fittings/Webb Piping Solutions

Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

 multiple series hot and cold water with airline wall plate All Stainless Steel Strahman’s air equipped wall plate adds a new element for customers in need of a compress air hookup near their mixing unit. The finished stainless steel plate allows for easy mounting and maintenance of both the mixing unit and compressed air valve.

Wall Plates Available:

Standard Mixing Units available in Bronze and Stainless Steel • • • • • • • • • • •

M-5000TG Bronze M-159 Bronze M-159TG Bronze M-156N Bronze M-5700TG Stainless Steel M-750 Stainless Steel M-750TG Stainless Steel M-756 Stainless Steel M-144TG Bronze M-200TS Bronze M-5000TS Bronze

 pedestal series #2 mixing station Strahman’s latest pedestal-type mixing stations incorporate a sleeker, more economical design. The mounting configuration is still completely constructed of stainless steel, making it ideal for applications. An added feature to this simplified design is that it supports ball and globe valve configurations as well.

Specifications: • Maximum water temperature: 200˚F / 93˚C • Maximum working pressure: 150 psi steam Pedestal Series Available:

Standard Mixing Units available in Bronze and Stainless Steel

M750 with ball valves - shown with premium hose assembly and S-70 Series nozzle.

• • • • • • • • • • •

M-5000TG Bronze M-159 Bronze M-159TG Bronze M-156N Bronze M-5700TG Stainless Steel M-750 Stainless Steel M-750TG Stainless Steel M-756 Stainless Steel M-144TG Bronze M-200TS Bronze M-5000TS Bronze

M750TG with ball valves - shown with premium hose assembly and S-70 Series nozzle.

 M-200-TS thermostatically controlled mixing unit Precision control over hot and cold water!

The Model M-200-TS features rugged construction and superb quality for superior thermostatic control. The unit’s accurate and solid, liquid-filled thermostat allows you to set the exact output water temperature desired – from 80°F to 160°F. With its durable bronze body construction, the M-200-TS valve features replaceable components that resist corrosion. Both the piston and liner are made of stainless steel material for long-lasting reliability. The unit also includes an integral shutoff valve. Backed by a one year warranty.

Features: • Precise temperature control from 80°F/27°C to 160°F/71°C • Adjustable temperature limit stop for maximum safety • Replaceable components facilitate servicing • Maximum water temperature of 160°F/71°C • Maximum working pressure to 125 psi • Senses and compensates for temperature or pressure fluctuations (up to a 50% drop in inlet supply pressure) • Maintains temperature to +/–3˚F • Inlet piping: 3/4” ball valves on 6” centers • Color coded temperature dial • Bronze and stainless steel construction, bronze chrome plated available

Spring 2009

Thermostat: • Senses slight pressure fluctuations • Is a hydraulically formed, liquid-filled bellows • Is linear in its expansion and exerts the highest possible operating force directly to the valve piston • Must have a minimum 15˚F differential between hot and cold inlet and outlet set temperature

1/2” Low-Flow Unit—Low-Flow rate: 5-7 GPM 3/4” High-Flow Unit—High-Flow rate: 10-12 GPM

F.W. WEBB COMPANY

11

Pipe Fittings/Webb Piping Solutions

Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390

IN STOCK in CRANSTON and ALBANY!

New Energy Savings Calculator Parker Transair has developed an energy calculator that enables system designers to determine savings made by using Transair in comparison to steel systems.

Contractor/end users can immediately calculate the potential saving. On the basis of compressor related data such as pressure, flow rate, annual hours of operation, the type of dryer and data from the characteristics of the network and the local cost of electricity, the Transair energy efficiency calculator defines the savings and the duration of return on investment. The results speak for themselves and show that Transair is the best performing system and the best long term choice, no matter whether the project is for an extension, the modification of an existing pipe system or a new installation.

To calculate energy savings using the Transair Energy Calculator, you will need: data about the compressor room, data about the compressed air network, and economic data (quotation for the network, electricity cost). With this energy calculator, you will be able to compare Transair to traditional compressed air pipe systems: . For a new quotation: the quotation for Transair compared to the quotation for a new network in steel. . For an existing installation: the quotation for Transair compared to the annual cost for an old network in steel.

The results will show estimations of: . Total annual cost for a traditional network and for Transair . Total of money saved for 1 to 10 years using Transair . The payback period of the initial investment in Transair products

• Industrial & commercial wash down equipment • Drain valves • Sampling valves • Line blind valves

12

F.W. WEBB COMPANY

Piping Systems for: • Compressed air • Vacuum

• Inert gases • OEM machines

www.fwwebb.com

Fire Protection Contact Bob Schuler or Mac McNulty: 800.624.6647

Mac McNulty

F.W. Webb continues to offer new and innovative products to speed any installation. We stock pretrimmed alarm and dry valves including the Victaulic NXT Quick riser dry pipe valve, as well as the newly designed Victaulic 747m riser manifold assembly. Many contractors are now using the Easy-flex flexible sprinkler drop assemblies offered in both recessed and concealed applications.

We continue to stock the new Victaulic 009 E-Z coupling. These are designed to be installed with less labor and faster installation Call us for any and all of your fire protection needs.

 SERIES V36 dry type standard spray pendent,

intermediate level pendent and recessed pendent

The Model V36 Series Dry Type Pendent and Recessed Pendent sprinklers have been redesigned utilizing stainless steel internal components. The V36 Dry Sprinkler is used in special applications such as freezing environments and conditions where sediment or foreign materials might accumulate in ordinary drop nipples.

The Model V3606 and V3605 Intermediate Level Pendent sprinklers incorporate a water shield plate to prevent water from higher level sprinklers from interfering with normal operation. These intermediate level sprinklers are designed for use in intermediate levels of rack storage or other open grate storage arrangements, where they may be exposed to upper level or ceiling level sprinklers.

Available in either standard or quick response versions, the Model V36 Dry Type Pendent Sprinkler utilizes a frangible glass bulb. At the bulb’s rated temperature, the sprinkler opens releasing the bulb seat assembly, causing the inner tube assembly to move, allowing the spring assembly to pivot alongside the inner tube. At this time, water flows through the sprinkler and is distributed by the deflector, in an approved discharge pattern.

The heart of the Model V36 sprinkler’s proven actuating assembly is a hermetically sealed frangible glass bulb that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure.

At the prescribed temperature the internal pressure within the bulb exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern.

 firefighter® gl fire protection fluid FireFighter GL is a non-toxic antifreeze designed specifically for fire protection systems. Use in place of water and other water-like fluids in sprinkler systems where freezing may either cause damage or interfere with the functioning of systems or equipment and/or toxicity to humans or animals is a concern.

Applications: FireFighter GL is a Glycerine-based material which is compatible with all approved types of pipe, including BlazeMaster® CPFC sprinkler pipe and fittings. Available in 5-gal pails; 30-gal or 55-gal drums; 375 or 330-gal totes; and 5000-gal tank truck.

 hercules cryotek -100 & 100/AL Cryotek 100: Virgin propylene glycol with triple protection inhibitor package, premixed with water, in a ready-to-use formulation. Undiluted, provides freeze protection to -60º F, minimum flow to -70º F, and burst protection to -100º F. Dilute for less severe conditions.

Not for use in boilers with aluminum heat exchangers .

Spring 2009

Cryotek 100/AL: Specifically formulated for use in boilers with aluminum heat exchangers.

Virgin, propylene glycol with triple protection inhibitor package premixed with water in a ready-to-use formulation.

Undiluted, provides freeze protection to -60º F, minimum flow to-70º F, and burst protection to-100º F. Dilute for less severe conditions.

We stock both recessed pendent and recessed sidewall dry heads in 12” lengths!

 fire-x-trol wet pipe sprinkler system expansion chamber

Protect your System with the FIRE-X-TROL®. . .

UL®* Listed and ASME Compliant The Fire-X-Trol® expansion chamber with pre-charged nitrogen or dry air pneumatic cushion reliably protects your system from pressure increases that result from fluid temperature change.

Since these systems are closed-loop systems, the expanded fluid needs to be accommodated with a pre-pressurized expansion tank.

As the temperature rises, the Fire-X-Trol® provides the additional space in the system to accommodate the expanded volume of solution.

The pneumatic cushion is compressed as the system pressure increases creating the space for the increased volume of fluid. The nitrogen volume in the chamber will be great enough to keep the system pressure below the pressure limitations of the system components. Properly sized, the expansion chamber will maintain maximum system pressures within the working pressure limitations of the system equipment.Your system is safely protected!

F.W. WEBB COMPANY

13

Cranston, RI: 866-850-7867 Winslow, ME: 800-452-1928 Syracuse, NY: 866-850-7867

Pump Sales • Service • Repair

Webb Pump Service Capabilities

Jim Bodle General Manager

New Employee

This field capability is not only important for repairs; even when purchasing new pumps, in some cases our truck fleet can eliminate the cost of hiring an outside crane service to set new pumps.

Webb Pump is pleased to announce the addition of David Buckless to the outside sales team.

David joins us with an extensive background in the pump industry spanning more than 30 years. He has strong experience with pump applications in the industrial, commercial, municipal, pharmaceutical, and food & beverage markets, and has extensive knowledge of the key lines that we represent. Dave’s well known as a “go-to” guy in our business and we’re pleased to have him on our team.

Webb Pump is Your Choice for Field Service!

The cornerstone of our field service capabilities is our five man service department with more than 35 man-years of experience between them.

Our team is supported by two fully-equipped boom trucks,one of which can lift 3 tons with a 26’ boom and the other 2 tons with a 14’ boom.

With on board air compressors, welding, acetylene torches, Optalign laser alignment equipment, and a complement of tooling, our trucks are designed to allow our technicians to remove pumps from remote and challenging installations as well as to perform minor repairs right in the field.

Remember one thing: When dealing with Webb Pump, you have the F.W. Webb Company behind everything that we do.

We warrant most repairs for a period of one year and will work to insure that you are happy with the results every time.

David lives in Glocester, RI with his wife Darlene and children, Michael and Nicole. Interests include playing hockey, boating, and spending time with his family. Please join us in welcoming Dave to Webb Pump; he can be reached in our Cranston office at 401-463-8300, via email at dave.buckless@fwwebb.com, or on his mobile at 401-427-5142.

In-Shop Repair At the core of any Pump Repair shop is the reconditioning of the pump.

While many Motor Shops attempt Pump Repair, there is a difference when dealing with a well-qualified shop that truly understands the pump itself.

Laser Alignment Laser alignment is a critical step to extending pump life. Misaligned pumps are a major cause of failure as it can cause vibration, which ultimately results in reduced bearing life, poor seal performance, and noise. Webb Pump offers a laser alignment service not only for new pump installations but also for existing pumps in the field.

The hear t of our service is our Optalign Pruftechnik laser tool.

This top-of-the-line piece of hardware is designed for use on a wide range of rotating equipment and with it our team can produce extremely accurate alignments even when pump access is difficult. The system can produce a printed report of your particular alignment which is important for maintenance documentation.

Our Service Department consists of a staff of four well-trained personnel that live and breathe pumps ever day. We are equipped to handle almost any type of pump repair and are limited only by physical size of the equipment; we routinely work with pumps below 300HP in our Cranston facility. In fact, when a larger repair may be required, as an authorized Fairbanks Morse distributor we have access to their repair facility that works with pumps that barely fit on a tractor trailer flatbed.

Whether it be a submersible sewage pump, a line-shaft vertical turbine, or a bench sized vacuum pump, we do it all.

Our repair philosophy is simple: We strive to return the pump to“as close to new” as economically feasible. Along with our team of technicians, we’ve made major investments in-house sandblasting, glass-beading, welding, machining capabilities, plasma-cutting, bearing heaters, spray paint booth, and several jib cranes. Our equipment is first-rate and ready to work.  Before repair

After Webb Pump Reconditioning 

Please contact Jim Tordoff in Cranston for more information or pricing!

14

F.W. WEBB COMPANY

www.fwwebb.com

800.452.1928 800.452.1928 207.873.7741 207.873.7741

Engineered Products Group Daryl Schoellkopf General Manager

Webb Kentrol/Sevco, with the addition of OConnor and Senecal, offer a broader than ever selection of products and services to the industrial marketplace. Working in the Power, Pulp and Paper, Food and Beverage, Biopharmaceutical, Municipal Waste and Water, and General Industry, the combination of our technical sales staff and factory trained technicians enable us to deliver unsurpassed value to our customers. Combining well over 400 years of technical experience makes us the logical choice for your current and future requirements.

F.W. Webb Acquires O’Connor & Senecal Inc. F.W. Webb has acquired OConnor & Senecal Inc. of Sutton, MA.– www.osisales.com. OSI is a Manufacturer’s Representative of major instrumentation product lines, the principal one being Endress & Hauser – www.endress.com. Alan Senecal and his team will become an integral part of Kentrol/Sevco. Daryl Schoellkopf will be responsible for the combined OSI and Kentrol/Sevco operations. This makes Kentrol/Sevco the most comprehensive source for valves and automation, and now instrumentation!

Alan Senecal

Jeff Gehrke

John Downey

Regional Sales Manager

Account Manager

Account Manager

alan.senecal@fwwebb.com

jeff.gehrke@fwwebb.com

john.downey@fwwebb.com

Alan wears many hats here at OSI but his true passion is sales. In his 25 years of sales experience, Alan has worked for an Independent Representative as well as for a Direct Manufacturer’s New England office.

His hands on application knowledge of Flow, Level, Pressure, Temperature and Analytical Measurement will assist you in all your applications needs. Alan enjoys spending time with his family, traveling and tennis.

Jeff has been a resident of Litchfield, NH for six years. He has 25 years experience in the instrumentation field keeping up to date with the latest technologies and processes of implementation.This has enabled him to better serve his customers’ needs. For the past 7 years, he has been involved with process control systems in the Biotech, Pharmaceutical and Power industries. He has raised two children that are now grown and have children of their own in Florida. Photography has been a passion of Jeff’s for years and with the prominence of digital imaging, he is enjoying the wonders of Photoshop. When time allows, he enjoys amateur drag racing.

John comes to OSI having served the Municipal Water/Wastewater Markets in New England in a variety of capacities. His sales and service background includes a decade of operations management and field work as a consultant to the public utility industry in North America and abroad.He has worked with instrumentation at the engineering,contractor and operator levels in the municipal wastewater industry and is pleased that some customers have become close friends. John, a Boston College graduate, has a background in comedy writing/acting which helped prepared him for his current life as a husband and father. John and his wife Kate have two children, Claudia, and Declan.

He enjoys his children’s participation in the Boston Ballet and local baseball and soccer.

He has lived in Dedham, MA for nine years.

His son Declan reports that his favorite song is “the ball game on the radio”.

Nate Grady

Dan Desilets

Inside Sales

Inside Sales

Karen Brosnihan Office Manager

nate@fwwebb.com

ddd@fwwebb.com

Nate has over ten years of experience in virtually all aspects of Operations which he brings to OSI. A former production planner, return coordinator and technician, Nate utilizes everything he has learned on a regular basis at OSI and looks forward to learning more every day. Nate is a resident of Holden and enjoys reading as well as working on his house and yard.

Dan brings 15 years of “Customer Care” and sales experience to OSI. He enjoys the challenge of meeting and exceeding customers expectations each day. Dan’s attention to detail and listening skills give him an edge in assisting customers with complex application challenges.“Every day at OSI is a new adventure”, says Dan. He is a husband and father of two wonderful boys. Dan has a passion for Medieval and Renaissance history, theatre, sword fighting, and public speaking.

He looks forward to speaking with all of OSI’s customers.

Spring 2009

karen.brosnihan@fwwebb.com Karen brings over 20 years of management experience to the team. Having worked with Alan and Jim at OConnor Associates she was thrilled to join them when they created OSI. The thing Karen loves most about her job is that it is never the same day twice, it changes with every phone call. Karen loves volunteering at her daughter’s school and enjoys unwinding with a knitting project or a good book.

F.W. WEBB COMPANY

15

Actuated Valves – Instrumentation 800.452.1928 800.452.1928 207.873.7741 207.873.7741



Instrumentation Services • Installation and Calibration • PID Loop Tuning • Troubleshooting • System Start-up Support • Commissioning Support • Full Shut-down/Outage Assistance



Control Panel Design and Fabrication • CAD Design • UL Certification • NEMA 12/4/4x & Class 1, Div.1 • Custom Stainless Steel Fabrication • PLC Cabinets • Solenoid Cabinets • Complete Control Rooms • Sampling Systems • Damper Drives • Custom Consoles



Valve Services • Valve Calibration • Valve Repair and Rebuilding • Valve Diagnostic Surveys • Valve Optimization Software • Predictive Maintenance Software

Maine Based Energy Supplier Saves Big with an Energy Audit Problem 

Solution 

Excessive make up water, high steam and fuel demands, and potential hazards in the condensate pump room due to excessive flash steam in the condensate tank. Identify potential energy savings throughout the facility.

Perform a steam trap and system survey to identify potential sources of problem.

In an initiative put forth by William Littlefield of Sprague Energy, Searsport ME to look for opportunities to reduce operating expenses, Webb Kentrol/Sevco was contracted to perform a steam trap and system survey at their facility. During a two day period Webb Kentrol/Sevco technicians, located, identified, tagged, tested and recorded the steam trap population’s performance. As a result of that survey, Webb Kentrol/Sevco identified 16 failed open steam traps in the system. Webb Kentrol/Sevco determined that the plant was losing approximately 5,258,000 pounds of steam annually. This equated to a direct energy savings of $ 68,362.00. They also estimated that they saved over 119,000 gallons of fuel oil. But that is not the end of the savings.

Sprague Energy took Webb Kentrol/Sevco’s suggestions and replaced the 16 faulty steam traps. In follow up conversations with William Littlefield, they noted that the excessive make up water issue had been resolved and the flash steam issue has decreased. They have seen an increase in condensate return of 20%. They further estimated that the savings of water in a 1 year period would exceed 200,000 gallons of water from previous figures. Along with the savings in the water itself, they are realizing increased profits as a result of their savings in chemicals for the boiler water treatment.

Looking to realize savings like these, contact Webb Kentrol / SEVCO and mention our 4 Phase Steam Program.

Shutte & Koerting would like to announce the addition of Webb Kentrol/Sevco as the new representative covering New England exclusively.



Engineered Systems • CAD Designed Skid Mounted Process Systems • Metering Systems • Filtration Systems • Temperature Control Skids/Modules • Utility Boiler Burner Valve Racks • Instrument Racks • Pump Skids 800.452.1928

Scott Varney sva@fwwebb.com

16

Webb Kentrol/Sevco’s technical staff are very knowledgeable in the areas of pumping, moving air, vacuum, heating, and scrubbing. Their customer service staff is eager to handle your needs.

Our parent company, F.W. Webb, has been serving New England and Upstate New York since 1866. They offer one-stop shopping for all your facility needs with over 70+ locations and a complete package offering of Valve Automation and Pipe Fabrication, Industrial Pipe, Valves & Fittings, Plumbing, Hydronics, HVAC/R, LP Gas and Biotech.

We are proud to add them to our sales team!

Call Scott, Chad, Parrish, Nate, Dan or Cynthia with your questions.

Chad Collier chc@fwwebb.com

F.W. WEBB COMPANY

Parrish Lovell par@fwwebb.com

Nate Grady nate@fwwebb.com

Dan Desilits ddd@fwwebb.com

Cynthia Berkovsky ceb@fwwebb.com

www.fwwebb.com

800.452.1928 207.873.7741



Services • Authorized Crosby Valve “Pressure Management Center” • Holder of Certificates of Authorization for the use of “V”, “UV”, and “VR” symbol stamps • Factory trained and certified field and shop technicians • State-of-the-art steam test facility to 1500 psi • Liquid test facility to 3100 psi • Air test facility to 3100 psi • Electronic testing of safety valves, in line and under pressure • Hydraulic Lift Assist devices for testing safety valves in line at reduced pressure • Lapmaster facilities to ensure mirror-finish on valve seats, rotary joints, and custom machining • In-plant valve surveys and preventative maintenance programs

Webb Kentrol/Sevco Recognized for Outstanding Achievement by Dresser Masoneilan At the 2009 Americas Sales Meeting held by Dresser Masoneilan, Webb Kentrol/Sevco was recognized for outstanding achievement in 2008. Recognized as the leading Power MRO Engineered Products Representative by Dresser Masoneilan, the entire staff will be treated to a steak dinner prepared by Jim Gray, Americas Sales Manager. Webb Kentrol/Sevco was also recognized for their sales and service accomplishments in 2008 as this is the third time since becoming the New England Factory Representative.

Lothar Kartanos Award presented to Daryl Schoellkopf – General Manager of Kentrol/Sevco This award exemplifies the highest standards of Sales Professionalism, Leadership, Teamwork, Dedication and Loyalty that Lothar Kartanos epitomized throughout his career at F.W. Webb Company.

“I am truly humbled to have received this award. Lothar set high standards of professionalism during his lifetime.

Being recognized as even being on the same level as him is an honor. I wish I had 40 more of these so that each of the employees of our location could be recognized as well.

As without them and their efforts, I could not have met the expectations this award recognizes.” said Daryl Schoelkopf, General Manager of Webb Kentrol/Sevco (right) with Ernie Coutermarsh, Senior Vice President, Industrial Sales and Marketing (left).



Energy Conservation • Sevco’s “4 Phase Steam Program” • Internet Based SEVCO Computerized Valve Survey System (SCVSS) • Steam Trap, Unit Heater and System Surveys



Engineered Systems • Automated and Continuous Blowdown Systems • Burner Management Systems • Desuperheating & Steam Conditioning Systems • Boiler Controls • Condensate Recovery Systems • Relay Protection Panels • Skid Systems

DOWNLOAD our latest LINE CARD / OVERVIEW at: www.kentrol.com

or

sevco.fwwebb.com

Call Cord or Gary with your questions.

After–hours Emergency Service: 207.872.4779 sevco.fwwebb.com

Spring 2009

Gary Thibodeau ggt@fwwebb.com

Cord Collier col@fwwebb.com

F.W. WEBB COMPANY

17

Plastics Utilities Supply Company • 50 Everberg Rd., Woburn, MA 01801 Contact Dave McGlynn or Ian Power • 800.343.7555

John Romano Vice President, USCO

Today’s thermoplastic piping systems, offer features and benefits that can help to overcome the challenges of escalating construction costs and minimize harmful impact to our environment. These thermoplastic piping systems are lighter in weight, resistant to corrosion, have smoother interior surfaces than metals, and require less energy in total from manufacture to installation; all of this makes plastic piping systems a wise choice for your next application!

F.W. Webb Now Offers +GF+ Signet Flow and Analytical Instrumentation Georg Fischer Signet not only prides itself on delivering sophisticated, advanced flow and analytical technology, but we are also proud to offer easy-to-use instrumentation, ensuring simple installation and minimal maintenance.

Measurement & Instrumentation

Trusted worldwide for its fluid measurement instruments and sensors, George Fischer Signet is a leader in flow sensor insertion technology. We deliver advanced flow, pH, ORP, conductivity, resistivity, pressure, temperature and level measurement technologies which offer accuracy, dependability, ease-of-use and minimal maintenance.

FLOW Paddlewheel Flow Sensors • Turbine Flow Sensors • In-line Rotor Flow Sensors • Insertion Magmeter • Vortex Flow Sensors • ProPoint Monitors: Flow • ProcessPro: Flow • Integral Systems ProcessPro®: Flow

Deionization - Ultra Pure Water

pH/ORP pH/ORP Sensor Electronics and Preamplifiers • pH/ORP Electodes • ProPoint Mintoris: pH/ORP • ProcessPro Transmitters: pH/ORP CONDUCTIVITY / RESISTIVITY Electrodes: Conductivity/Resistivity • ProPoint Monitors: Conductivity/Resistivity • ProcesPro Transmitters: Conductivity/ Resistivity • Integral Mounted PrcoessPro: Conductivity/ Resistivity SPARE PARTS & ACCESSORIES Instrument Accessories and Replacement Parts TEMPERATURE / PRESSURE / LEVEL Temperature/Pressure Sensors • Submersible Hydrostatic Pressure Sensor • ProcessPro Transmitters: Temperature, Level, Pressure • Integral Systems ProcessPro®: Temperature, Level, Pressure

MULTI-PARAMETER CONTROLLER

Industrial Wastewater Neutralization

TURBIDITY

OTHER PRODUCTS Safety Barriers • Switching Power Supplies

INSTALLATION AND WELD-ON FITTINGS Plastic Installation Fittings • Plastic Installation Fittings (metric) • Metal Fittings

18

F.W. WEBB COMPANY

www.fwwebb.com

Utilities Supply Company • 50 Everberg Rd., Woburn, MA 01801 Contact Dave McGlynn or Ian Power • 800.343.7555

UNE College of Pharmacy Project Titan Mechanical of Portland, ME has begun the RO/DI water piping installation at the University of New England School of Pharmacy in Portland, ME. Titan is installing Asahi America’s Polypropylene ProLine 150 socket fusion material. Ron Moulton, the Project Manager for Titan, had his men trained on-site by certified trainer Jim Matthews of F.W. Webb Company. Ron emphasizes the importance of proper training to ensure a leak-free system. Titan is serviced on the outside by Stacey Papa and inside sales by Andy Davis.

Plastics Webb Plastomatic Industrial Training Plastomatic Valve presented their prestigious “TOP 10” distribution award to USCO, F.W. Webb’s Plastics division for outstanding sales achievement for 2008. The entire group pictured below had just completed the Plastomatic Engineered Valve training.

Ground breaking: (from left to right): Jacque Carter, UNE provost; John Cormier, Dean of the College of Pharmacy; Danielle Rich, UNE President; and Vincent E. Furey, Jr., Chair of the Board of Trustees.

Shown (from left to right): Ian Power, Edgard Aguilar, Steve McGlynn, Dave McGlynn, Bill Jangro, Pat Hoey, Dan Harrington, Lisa Cambiotti (Plastomatic), John Romano, Devon Craig, Andy Stove (ANS Marketing), Bob Sinclair (Plastomatic), Rick McAllister, Stacy Pap,Ted Haley, Keith Sharron, Armand Rocheleau, Jim Matthews, and Dennis Morrissey.

Front side of the New School of Pharmacy.

Titan Mechanical’s project foreman, Ron Moulton and John Romano of F.W.Webb inspect the finished high purity piping system.

F.W.Webb’s Plastics Division provided specially fabricated piping components.

Internal shot of the polypropylene high purity system.

Spring 2009

F.W. WEBB COMPANY

19

Specialists in BioProcessinG Components 1.877.WEBB.BIO • 401.463.4176 • FAX: 401.463.4160 Contact Jim Bodle • www.webbbiopharm.com

Jim Bodle General Manager

Webb Bio-Pharm is the authorized Crane Saunders sanitary diaphragm valve distributor in the New England Region. Whether you need a valve to ship from stock same day or need assistance engineering a specific diaphragm valve fabrication for your particular application, we can get it done for you!

Spirax/sarco sTAINLESS STEEL At Webb Bio-Pharm, Customer  SAFETY VALVE Safety Comes First!

Does your company have a standard operating procedure for opening a pressurized sanitary process Tri-Clamp connection?

In today’s fast paced manufacturing environment it is imperative to put safety first. This article focuses on the multitude of capped off Tri-Clamp connections throughout the manufacturing facility. Transfer panels, pipe run terminations, use points, instrument tees, and vessel ports are often capped with a blank ferrule and a sanitary Tri-Clamp. Often times these lines are charged with caustic chemicals and process fluids. Some applications are seeing “Clean in Place” and “Steam in Place” protocols that can leave lines charged and under pressure.

Manufacturing Engineers, Process Technicians and Facilities personnel are potentially at risk from the process of opening a capped line and exposing themselves to a chemical or the sudden release of pressure.

With over 12,000 installed, Fluidline’s Sample and Angle Bleed Valves have proven to be the answer for several large Bio Tech and Pharmaceutical companies. Some companies refer to them as “Safety Caps” and have written them into their standard operating procedures to be installed on all dead end process connections. The S.O.P. of opening the bleed valve before releasing the Tri-Clamp allows the technician to double check for pressure or process chemicals in a controlled and safe manner.

The sanitary design offers minimal dead leg, controlled sulfur stainless steel, autoclavable handles, PTFE-TFM seats, and is available to accommodate Tri-Clamp connections up to 4 inch. Other available options include, hose barb and Tri Clamp outlet connections, eccentric or concentric orientation, inline or 90 degree designs.

Please contact us today for more information.

For Clean Service Applications

The SVL488 is a stainless steel, full lift, TÜV approved safety valve suitable for steam, gas and liquid applications.

Applications: The SVL488 is suitable for the overpressure protection of low pressure steam equipment, pipelines and pressure vessels, particularly within the brewing and beverage industries where extremely high standards of hygiene and cleanliness are required to maintain product quality and to minimize contamination of the process media.

Certification: A manufactures ’ Typical Test Report is provided as standard for each valve including valve set and hydraulic pressure. Also available on request is material certification in accordance with EN 10204 3.1.

Sizes and Connections Nominal inlet size DN 25 Nominal outlet size DN 40 Inlet clamp inch 1½ Outlet clamp inch 2

40 65 2 3

50 80 2½ 4

65 80 100 125 3 4 4½ 5

100 150 4½ 6

Pipe connections: Valves are available with flanged DIN 2633 PN16 or sanitary clamp ISO 2852 (ISO 2037 pipe standard) connections.

Please state connection required when placing an order.

Optional extras: EPDM seat seal (Maximum 4 bar g set pressure on steam). The standard wetted surface finish is 0.75 μm Ra. Other finishes are available on request .

 Featured Gaskets By Rubberfab Technologies Rubber Fab Technologies Group, a Material Science Company, is a leading innovator of high quality hygienic seals, sanitary gaskets, filler machine components in a wide range of high purity elastomer materials. Rubber Fab Technologies Group provides state of the art technology for the Pharmaceutical and Biotechnology Industries.

TUF-FLEX meets stringent Introducing a technologically advanced new hygienic seal, TUF-FLEX. standards • U.S. Pharmacopeia Class VI This revolutionary new seal from Rubber Fab Technologies Group is Certification the world’s only unitized seal, setting new standards for purity, perfor•

Cytotoxicity Criteria mance and flexibility. Designed to meet critical requirements in phar• Title 21 CFR 177.2600 and Title maceutical, biotechnology, ultrapure water, WFI (water-for-injection) CFR 177.1550 and difficult food and beverage processing, TUF-FLEX outperforms other seals while eliminating costly process interruptions.

• USDA and 3-A Sanitary Standards Achieve higher performance under SIP/CIP Conditions •

Current Good Manufacturing • Uniting the flexibility of an elastomer with the chemical resistance Practices (CGMP) of PTFE •

ASME-BPE Standards • Seats perfectly •

Animal Derived Ingredient Free • Superior resistance to cold flow and creep •

Exceptional flexibility • Minimal thermal expansion • Outstanding service life Call today for a quote or • Exceptional flexibility if you need more information!

20

F.W. WEBB COMPANY

www.fwwebb.com

HVAC/R & Controls 800.253.7838 • 781.933.1804 • Fax: 781.933.3528

Exceeding the demands of a changing industry is not always easy. With escalating energy costs, demands for higher efficiency and renewable energy systems; change becomes daily. Webb continues to meet the challenges with systems utilizing R410A refrigerants, advance coil technology with the York Micro Channel, along with Variable refrigerant John Thomas systems by Daikin. Call Webb today and take advantage Vice President HVAC/R & Controls of industry leading products and systems.

 direct coupled electric linear valve actuators

 T600 Series Digital thermostat The thermostat replaces many competitive brands.

The T600 digital programmable and non-programmable thermostats provide advanced temperature control and easy-to-follow menudriven programming. All setup and programming is done at the push of a button by following plain text menus.

The T600 is available in a 7-day, 2/4 event programmable model or a non-programmable model. Each one offers at least 20 configurable parameters. They can control single-stage multi-state, and heat pump units. Plus, the programmable model controls unitary rooftop equipment with economizers.

ML6421/7421 Non-Spring Return ML6425/7425 Spring Return Suitable for use with on-off controllers/ SPDT floating controllers or electronic modulating systems.

 remote temperature controllers

T775 Series

Offers the flexibility of up to four stages ON/OFF, modulating or reset control with digital display and wide set point range.

 Variable Air volume modular assembly

VMA1400 is a configurable digital controller with a pressure sensor and an actuator, housed in a pre-wired unit. Continuous loop tuning through algorithms, automated commissioning, position feedback for enhanced damper position accuracy, advanced diagnostics, N2 network communication and Palm Pilot interface.

 single/dual transmitter input receiver control

RKS1001

 two position actuator MA-5200 MA-5300 Series Series

VSD Series • World’s smallest footprint • Standard copy/paste keypad (for copying parameters to other drives) • External Fan is removable with no screws (Frames 4 & 5) & Fan can be temperature controlled • EMI/RFI filters & 3 % Line Reactors Standard Local / Remote button on keypad (1 – touch)

 Retrostat kit Converts existing pneumatic room thermostats to Powers 192 Series. Competitor retrostat kits have factory calibrated changeover pressure to match the manufacturer they replace.

 powermite 599 series MZ Series: . Close-off up to 25 psi . Electronic actuators only 0 to 10V fail-in place 24 Vac, 2-position, 3-position control . Low leakage rate (ANSI Class IV)

Please contact your F.W. Webb Sales Representative for more information!

Spring 2009

F.W. WEBB COMPANY

21

HVAC/R & Controls

800.253.7838 • 781.933.1804 • Fax: 781.933.3528

energy saving commercial equipment

 Millennium Split System 2 and 4 Pipe Condensers 15 to 50 Ton

All models include the Simplicity controls system, engineered for ease of set up and programming, to provide alarm monitoring. Free local networking carries all alarm and diagnostic data directly to an on-site PC. When available,York Wireless data can be transmitted virtually anywhere.

These units are completely assembled, piped and wired at the factory to provide one-piece shipment and rigging. Each unit is pressurized with a holding charge of refrigerant-22 for storage and/or shipping.

The compact design, clean styling, low silhouette, and quiet operation make these condensing units suitable for almost any outdoor location.

• Meets or exceeds Ashrae 90.1-1999 standards • Simplicity Controls • Inherently protect condenser fan motors • V-Coil Design with exterior service port connections • Five-minute anti-short cycle timer and minimum compressor run time • Standard operation to 40 F. Field-installed Low Ambient VFD Control to 0ºF • Factory installed disconnect and Technicoat coils option • Scroll compressors provide both high efficiency and reliability • Condenser coils are constructed of copper tubes and aluminum fins for durability and long lasting efficient operation • Crankcase heaters that will be de-energized when the compressor is operating • Self contained high and low pressure controls • Solid state or internal line break compressor motor protection • Class 2, 24-volt thermostat control circuit

 Large Commercial Rooftops (Y) 25, 30 and 40 Ton

York Millennium® Rooftops offer the flexibility to meet the requirements of a wide range of installations.They’re built to last and priced to compete.

Numerous options can be added to the base unit to satisfy almost any specifications —from the simple to complex. Units are offered in the following combinations: • Cooling Only • Cooling/Gas Heating (Natural Gas or Propane) • Cooling/Electric Heat • Cooling/Hot Water Heat • Cooling/Steam Heat In addition, these units are designed with the flexibility to support the industry’s best practices for indoor air quality.All these features are available on 25, 30- and 40-ton single-package units that are easy to install, use, and maintain. Factory-installed options, such as economizers, power exhaust, high-efficiency motors or filtration, barometric damper relief, 0° low ambient, high-capacity evaporator coils, and single-unit disconnect, add to the versatility of these selfcontained rooftops.

• Double-wall construction with galvanized sheet metal liner to protect against microbial growth.

• Rigid sheet metal inner liner to keep insulation out of the airstream.

• Sloped drain pan protects against pan corrosion and bacterial growth.

• Pitched roof design for natural drainage.

• Scroll compressors for efficiency and durability. Multiple refrigeration circuits for greater turndown and the best unloading capabilities in the industry. connection for BAS compatibility.

• Extended flue connection on gas units to eliminate the possibility of corrosion in the furnace heat exchanger.

• Constant air volume or Variable air volume by inlet guide vanes or variable frequency drive.

• Full range of airflows and static pressures to meet most every application requirement.

F.W. Webb is the exclusive distributor of York Heating and Cooling Systems and Source 1 Parts for New England and Upper New York.

 variable refrigerant volume (VRV) system

Optimized R410A Design

❶

❷ This industry benchmark is the world’s first R410A-operated ❸ variable refrigerant volume ❹ (VRV) system and represents a considerable advance in efficiency ❺ over competitive systems. ❶ Aero Fitting Grille and Aero Spiral Fan ❷ DC Fab Motor Optimized R410A design: ❸ Sine Wave DC Converter Daiken sets the industry standard ❹ E-Pass Heat Exchanger ❺ Reluctance Brushless DC Compressor The motor comprises powerful neodymium magnets that generate the reluctance torque. These magnets are approximately 12 times stronger than ferrite magnets and contribute to its substantial energy-saving performance.

➊ ➋ ➌ ➍ ➎

22

F.W. WEBB COMPANY

F.W. WEBB TO DISTRIBUTE ACADIA HEATING AND COOLING SYSTEM

Energy-minded homeowners and businesses in the Northeast now have easier access to the Acadia Combined Heating and Cooling System from Hallowell International with the new distribution partnership with F.W. Webb Company.

The Acadia is a revolutionary new green technology for heating and cooling a home, while at the same time helping consumers and businesses save money. Acadia outperforms conventional fossilfuel-based heating systems such as oil-powered furnaces, the most common system in the Northeast, by up to 300%.

F.W. Webb has long been a partner with Hallowell International in the development of the Acadia, providing components to manufacture the system. The enriched partnership provides Hallowell with an expanded distribution network with increased training facilities and customer support through the 70+ F.W. Webb facilities across New England and Upstate New York.

The Acadia is a single system engineered to comfortably heat and cool homes no matter what the weather outside, and it is both economical and environmentally friendly. The engineers at Hallowell International created the Acadia using revolutionary boosted compression technology, enabling this clean technology to run effectively and efficiently in temperatures as low as -30°F.

www.fwwebb.com

800.253.7838 • 781.933.1804 • Fax: 781.933.3528

HVAC/R & Controls YORK AUTHORIZED FACTORY PARTS

Spring 2009

F.W. WEBB COMPANY

23

Refrigeration 781.272.6600 • fax: 781.275.3354 Contact Harry See

Harry See Vice President Refrigeration

...that F.W. Webb can configure your needs on WALK-IN boxes — from the box to all the refrigeration equipment and glass doors that may be required on your job.

Please contact your F.W. Webb sales representative for more information!

With the business climate being what it is today, F.W. Webb is working hard to keep proper inventories of refrigeration products to service our customers’ needs. Because of increased service work today, we are stocking more service and equipment parts to keep up with your demands.

R-22 production will be cut to 25% of what they manufactured in 1998. Prices will increase this year and become in short supply. F.W. Webb will have good supplies on R-22 now and in the future.

 cROWNtONKA wALK-INS Construction Cross-Section

Quality Construction from the Inside Out

 commercial refrigerator doors Performance that out–classes all others.

• Absolutely not energy costs • Unprecedented condensation protection • Greater product visibility • Superior glass clarity • Lower installation costs • Lower maintenance costs • Field reversible doors • Energy smart lighting system • Heavy-duty shelving with price tag molding

by Commercial Door Co.

F.W. Webb Handles Your Springtime Start Up Chemicals and Oils

 chandler / heatcraft Evaporators

Features: • Patented Floating Tube condenser construction • Suction and discharge vibration eliminators with spring mounted Discus compressors • Fixed high and adjustable low pressure switches • Sentronic oil failure switch with Discus compressors • Discharge line check valve with high and low temperature scroll compressors • Discharge line thermostat with high temperature scroll compressors • Liquid injection solenoid valve and capillary tube with low temperature scroll compressors • Manual pump-down switch

 tecumseh condensing units

24

F.W. WEBB COMPANY

www.fwwebb.com

Institutional/Property Management 781.272.6600 • fax: 781.275.3354 Contact Dean Plouffe

Water and energy conservation continue to drive innovation in the development of new products in the plumbing and heating industry. Municipal buildings, hospitals and schools are welcoming “green” products that are consistent with their Dean Plouffe Regional Sales Manager goals of sustainability. dean@fwwebb.com

 ecopower® flush valves AUTOMATIC FLUSHING SYSTEM TOTO, the world leader in advanced plumbing systems, provides sensor operated flush valves for facilities demanding the finest sanitation equipment for busy restrooms. “Hands-free” technology effectively reduces unsanitary conditions from unflushed fixtures.

SELF-GENERATING POWER SYSTEM TOTO’s new technology of automatic generator flush valves offers easy installation without the cost and downtime required to install power supplies and wiring for each valve.A hydro-powered turbine charges the power supply during usage, eliminating the need for a battery replacement or consumption of external power for up to 10 years.

SUPERIOR PISTON VALVE TOTO’s piston valve technology is a marked improvement over traditional rubber diaphragm type valves. Longer piston travel and a self-cleaning stainless steel screen to capture debris reduces common problems such as continuous running and flooding. The piston seat itself will not warp or mis-seal, reducing repair and maintenance costs. A micro-porous cup seal keeps the piston self-lubricated upon each activation with the incoming water supply.

For optimal performance, we recommend using our 1.28 HET flushometers in conjunction with TOTO high efficiency toilets.

FEATURES: • Revolutionary EcoPower hydropower self-generating system • Automatic sensor activated • Superior Piston Valve • Positive Seal: No warpage or mis-seals • Self Cleaning Debris Screen • No valve resetting after water pressure loss • No Scheduled Maintenance: Reduce call backs, no regular diaphragm replacement

Sensor High Efficiency Toilet (HET) Flush Valve, Exposed - 1.28 GPF

• Mechanical override • Consistent Performance: Works with low (30psi) or high (125psi) water pressures • Easy Retrofit: Standard size, replaces most flush valves • 1.28 GPF or less • 24 hour automatic flush for trap seal protection • ADA Compliant • Three Year Limited Warranty

Self-Generating EcoPower® System HET Sensor Toilet Flush Valve, Concealed (14” x 12”) - 1.28 GPF

 clean dry high speed hand dryer AC Powered, Sensor Activated HDR100#GY Quiet Operation, Fast Drying (12 seconds) TOTO’s High Speed Hand Dryer is equipped with a very fast, quiet motor. Wide air nozzle dries hands fast and evenly. Clean Dry™ dries hands in 12 seconds with low noise level, rating of 62 dB for comfortable use.

Hygienic • Touchless, infra red sensor activated operation • Reusable, washable filter for clean, fresh air • Drain tray collects water drips from hands to keep the restroom environment clean and dry.

• AC Powered, Continuous operation up to 60 secs.

Economical • Low power consumption • Designed for very easy installation

Spring 2009

F.W. WEBB COMPANY

25

Industrial Specialties J.M. Coull Honored for 37,000 s/f F.W. Webb Bennington, VT Facility J.M. Coull received a 2008 Excellence in Construction Award (EICA) from the Associated Builders and Contractors (ABC) Mass. Chapter. The project, the F.W. Webb Wholesale and Local Distribution facility in Bennington, VT. won a Merit Award, the highest level given, in the Pre-engineered Building category of projects ranging between $2 and $10 million.

This 37,000 s/f project involved the new construcShown (from left) are: Andrew Coull, tion of a pre-engineering metal building to house Liz Mason, JM Coull; Andrew McBeth, 10,500 s/f of self-serve plumbing, heating, refrigAndrew Loverud, Design Science eration and HVAC distribution center, showroom International. and office space. A 17,000 s/f high-bay warehouse spans the rear of the facility and features a 16,000 s/f mezzanine for large product storage. Particular challenges included constructing the facility during a Vermont Springr, adhering to the city of Bennington’s strict zoning regulations, and timing the work of sensitive materials like concrete to the weather in order to ensure structural integrity.

The award was presented at a ceremony on Tuesday, November 18th, at a reception in conjunction with the annual Build Boston convention held at the Seaport World Trade Center. Andy Coull, president, and Andrew McBeth, pre-construction project manager received the award on behalf of J.M. Coull.

Flexhose Training Seminar

Jim Buckley, Gary Santos, Keith Sharron, Paul Dummitt and Jim Dummitt from F.W.Webb Company attend engineering and sizing seminar on Industrial and Commercial pipe and pump connectors at Flex-Hose headquarters in Syracuse, NY.

CD Sales collaborating with NTK Malaysia for New Doha Airport Qatar Project CD Sales had the opportunity to be the provider of Asco Solenoid Valves for the new Doha Airport project in Qatar.

The airport is being constructed near the city of Doha and, when finished, will be approximately two-thirds the size of the city (12 times larger than the old airport).

Try CD Sales for all your International projects.

CD Sales has a complete understanding of requirements for shipping, packing, and reporting on International Exports!

The terminal building at New Doha Airport with its access road and wave shaped roof.

The Emiri terminal at New Doha Airport for the use of the royal family and VIPs.

Call CD Sales at 800.828.0557 • Fax: 603.218.2171 • email: cdsales@fwwebb.com Visit our web site at www.centraldistributionsales.com

F.W. Webb Conducts Steam Seminar at University of Connecticut Paul Dummitt,Webb steam expert and John Cilyo of Spirax Sarco presented a seminar on Energy Savings, Steam Utilization and Trap Sizing and Testing.

Need training?

Email Paul at: sls124@fwwebb.com

26

F.W. WEBB COMPANY

Mike Kennedy to Manage Northampton Branch of F.W. Webb Mike has had great success as Store Manager of F.W.Webb’s Hingham branch and the C.I.P. program. Congratulations in your new role as General Manager of Northampton!

www.fwwebb.com

Industrial Specialties

LEAKTIGHT PERFORMANCE SAVES ENERGY! New England Labs experiences the VALUE of the Parker Transair Piping System.

A 50,000 sqft facility that manufactures Specialty Laboratory Furniture for Research & Development Labs.

Installed 40mm compressed air lines from compressor to drops of 25mm & 16.5mm to air guns, air hoses, paint rooms, milling machines, production equipment, safety couplers, and wall brackets for air tools.

Companies can SAVE hundreds...sometimes thousands of dollars with reduced downtime. The company benefits from the EASE OF INSTALLATION with the ability to install new equipment or relocate equipment within their mfg. areas very quickly .

Transair has the BEST OVERALL INSTALLED COST of any piping system on the market today. Due to the flexibility and modular design of the Transair quick-to-connect feature, manufacturing is “up and running” 3 to 4 times faster than if it was installed with traditional copper or steel pipe.

The tightly-sealed piping system enables the compressor to work with high efficiency ...NOT overworked, wasting compressed air through leaking pipe joints.

The efficient Transair Piping System always provides CLEAN air from the compressor directly to the areas where it’s required SAVING VALUABLE ENERGY COSTS!

Jason Pentland to Manage Williston Branch of F.W. Webb Jason Pentland will be assuming the role as General Manager of the Williston,VT location.

Jason has been the Operations Manager at Victor for the past 4 years and has come to truly enjoy working for F.W.Webb Company. He is very excited about this new opportunity.

Jason came to work for Webb from a manufacturing facility where he was responsible for the entire facility and ran production.

His wife and 2 boys are also looking forward to life in Vermont.

Congratulations Jason!

 Duplex basket strainers Keckley Duplex Strainers are used in continuous flow applications where the process cannot be shut down for cleaning.

Sizes - 3/4”-8” Class - 125, 150 Body Materials - Cast Iron, Carbon Steel, 316 Stainless Steel

In stock for immediate shipment!

Spring 2009

F.W. WEBB COMPANY

27

Industrial Specialties

UltraPro Alkaline Batteries TM

» » »

Built to exceed the per formance demands of industrial applications Contractor Packs feature convenient reclosable, reusable containers that protect against damage and shor t-circuiting

»

Mercur y-free formula − better for the environment

»

Guaranteed against leakage

Ideal for contract or bid business

AL A A-24

ALD -12

AL A A A-18

Lasts as Long as Duracell® and Energizer ®

AL9V- 8

ALC-12

©2008 SBI CS 37440 * Based on top Industrial Distributors

 forged steel fittings Phoenix *Capitol domestically manufacturers a full line of forged steel fittings and unions along with branch connections marketed under Trans-O-Con. All Phoenix *Capitol products are produced to the latest ASME, ANSI and ASTM specifications and adhere to existing Approved Manufacturing Lists.

28

F.W. WEBB COMPANY

www.fwwebb.com

Tools

compact impact

M18 Jig Saw 1¾” SDS-Max Rotary Hammer

5426-21 • Best-in-class 14 Amp, 1,300 MWO Milwaukee motor.

• 8.8 ft/lbs Impact Energy – heavy duty crank piston mechanism delivers hard hitting performance • 450 RPM and 2,840 BPM – delivers fast drilling even in the toughest concrete • Constant Power Technology – maintains drilling speed and power when the tool is under load with anti vibration system

 5½”, 12”, 18”, and 24”

Universal Quick Lock 7/16” Extensions

• • •

48-28-1030 More production, less hassle Quick change of bits, – no tools required Impact Rated, making this the most versatile extension on the market

2645-22 • Quik-Lok™ Blade Clamp – Provides fast and easy keyless blade change • Tool free Shoe Bevel with positive stops – Allows for quick and accurate shoe adjustment • 5-Position Orbital Cutting – Versatility for application specific cutting • -Over-molded grip with variable speed trigger – Provides optimal control for cutting a variety of materials

3/8” sq. drive impact wrench w/ring

2451-22 • Powerful impact mechanism that delivers up to 1,000 in lbs of torque • Tool belt portable at only 2.3 lbs • 3/8” Anvil w/friction ring retention • Easy socket insertion/release and increased durability • On-Board fuel gauge

 Microexplorer™ digital inspection camera The new RIDGID® microEXPLORER™ Digital Inspection Camera is a powerful, handheld, video inspection system that’s portable enough to be carried anywhere. This completely digital platform allows you to perform and record detailed visual inspections of hard to reach areas. The microEXPLORER Digital Inspection Camera allows you to offer more services and provides you the tools you need to detect and diagnose the unreachable.

Specifications: • Display: 3.5” Color LCD (320 x 240 resolution) • Image Capture: JPG Images (1280 x 1024) • AVI Video (320 x 240) • Recording Medium: Internal Memory or SD Card • Additional Ports: USB and SD card • Image Controls: Pan, Zoom, Self Leveling, Low Light Vision • Lighting: 4 Fully adjustable LEDs • Camera Diameter: 0.7” (17 mm) • Cable Reach: 3’ (expandable to 30’ w/optional extensions) • Waterproof: Camera & Cable to 10’ (when properly assembled) • Power Source: Rechargeable Lithium Ion Battery (4 hours of continuous run Time)

Spring 2009

wrench w/detent

2652-22 • Milwaukee designed impact mechanism for maximum application speed • Milwaukee 4-pole frameless motor for maximum efficiency run-time • 1/2” Detent Pin that provides positive bit retention • Built-In LED light that illuminates work surface

and

4½” cut-off/grinder

2680-22 • 4-Pole Motor – Delivers maximum power when cutting or grinding • Overload Protection – Prevents damage to the tool and battery in abusive situations • Debris Baffles – L-shape vents keep debris from entering the tool • Tool Free, Burst Resistant Guard – Allows for quick, easy guard adjustments • Paddle Switch Design

 K-60 sectional machine

For 1¼” to 4” (32-100mm) Drain Lines

• A compact machine for institutional, commercial or residential cleaning.

Also ideal for septic tank vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages.

• Ideal for rooftop vent stacks. Rear handle allows for easy transporting up ladders and onto rooftops.

• Unique, easy-to-use, instant-acting cable clutch maximizes operator control.

– Push handle down, cable spins at 600 RPM. – Release handle, cable stops instantly, no overrun to kink or damage cable.

• Simple adjustment knob allows unit to spin both 7/8” (22mm) and 5/8” (16mm) diameter cable. Adjusts in seconds.

– 7/8” cable (C-10) cleans 2” to 4” lines through 150 feet.

– 5/8” cable (C-7, C-8, C-9) cleans 11/4” to 4” lines through 125 feet.

• Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.

• Equipped with 1/2 HP motor.

• CSA approved.; Approved to UL standards (NRTLC).

K-60SP-SE Includes: • K-60SP Machine; A-1 Operator’s Mitt; A-60-12 Rear Guide Hose..

• A-62 Cable Kit, includes: A-8 Cable Carrier. Five Sections Of C-10, 7/8” Cable, total 75 ft.

F.W. WEBB COMPANY

29

Tools/Safety  Roll Groover RGCOMBO2

 Power Drive

 oil bucket

The Reed Power Drive rotates the pipe while cutting, threading, or reaming operations are performed on up to 2” diameter pipe and bolt.

WHY REED? Flat top of housing is ideal for placing tools. Power drive includes longlasting HSS dies, not alloy dies. Also, Reed’s Power Drives are approved to the latest USA and CSA Canadian standards!

Reed Oilers effectively deliver threading oil to piping work. The gun-and-trigger approach makes it easy to pump oil directly on the work. The rugged and completely portable Reed OLBUCKT1 (#06150) comes with both a metal bucket and a metal drip pan/chip tray. The system double-filters and recirculates oil as the chip tray catches the big waste pieces and the filter strains out any small particles. OLBUCKT1 features a sturdy nozzle made from turned aluminum. This system ships with one gallon of Reed Threadguard dark cutting oil (#06120). Additionally, the Reed OLBUCKT1 provides a muchrequested 60” (1524 mm) hose.

05303 (5301PDCOMBO)

2-in-1 unit for power and manual roll grooves. Capacity of 1¼” – 6” for up to Sch. 40 steel, stainless steel and aluminum pipe. No groove roller or shaft changeout required.

Includes both straight and bent handle ratchet wrenches. Compact, portable design with built-in handle for improved mounting and transporting. All gears enclosed in the casting to minimize debris entering tool.

Consistent tracking makes this tool great to use time after time.

06150 (OLBUCKT1)

Improve Your Plant Safety As your supply partner, the F. W. Webb Company provides you with comprehensive product application support.

Together with the Haws Corporation, we can improve facility safety, utilizing emergency eyewash and emergency shower equipment. This program is called the Risk, Response & Readiness Program −“R3”.

Risk, Response & Readiness—“R3” Here’s how it works: • Registration: Contact your local F. W. Webb account manager to review program details and registration form.

• Education: F. W. Webb and Haws representatives will schedule in-plant seminars for your staff on the use of eyewashes, eye/face washes and emergency drench showers and related safety procedures.

• Survey: F. W. Webb and Haws representatives will work with your staff to develop a comprehensive analysis of the state of your emergency response capabilities.

• Report: The emergency response survey will trigger a confidential structured report to be presented to the appropriate people at your facility.

• Action Plans: An action plan and timeline will be generated for accomplishing any up-grades or alterations needed to bring your equipment into compliance.

30

F.W. WEBB COMPANY

For more information on our “R3” training, please contact Dean Plouffe at 800.344.9322 or dean@fwwebb.com.

www.fwwebb.com

Safety  Kwik Kit Safety Railing Kits • Strong and safe, exceeds OSHA and BOCA standards • Corrosion resistant fittings • Safety yellow powder coat for high visibility • Easy assembly using a standard hex key • Available in galvanized or aluminum • Ability to secure using bolts or chemical anchors • Standard 1½” pipe Kwik Kit Safety Railing Kits allow you to create a sturdy railing system with no welding or threading, while giving you the added visible advantage of yellow safety rails. These railing kit are very quick to assemble using only a standard hex key to tighten the large, easy to use set screws. Kwik Kit Safety Railing Kits are pre-packaged and provide 6-foot post spacing for straight sections, corner sections or extension sections. The rails may be cut where shorter sections are required. The kits may be secured using bolts or chemical anchors attached to the base fittings.

 Kee Lite Aluminum Fittings Fitting Function with Style Handrails / Lighting Grids / Store Fixtures / Playgrounds / Guardrails / Set Design & Props • Large set screws, easy installation & strong grip • Esthetic look and design • Light weight • Corrosion resistant • Hidden set screw for smooth aesthetics • Low long term maintenance • To be used with 1”, 1¼” or 1½” pipe sizes • Available from stock Kee Lite fittings can be easily installed with a hex key and pipe cutters, there is no need to weld, thread or drill, saving you both time and money.

L61

Corner Kit

L45

L150

L160

L19

LM58

6’ Extension Kit

Available in pre-packaged Corner, Straight and Extension Kits

LC50

Water Treatment Facilities • Industrial/Commercial • Institutional Corrosive Environments • Retail & Restaurant Design • Municipal Straight Kit

Spring 2009

Now Available in 24 different models

F.W. WEBB COMPANY

31

Presorted Standard US Postage Paid Permit No. 12 Bedford, MA

F.W. WEBB COMPANY 160 Middlesex Turnpike Bedford, MA 01730 www.fwwebb.com We Honor:

F. W. Webb is a participant in American Express’s Corporate Procurement Card Program.

F. W. Webb Company is in no way responsible for any printing errors, omissions or typos in the WinSheet.

Through www.fwwebb.com to WebbConnect, you can: Place Orders • Get Pricing • Check Inventory Evaluate Heat Loss/Gain • E-mail

71 Convenient Locations CONNECTICUT Franklin 888-642-9086 Hartford 800-252-9322 Hartford Victor 800-243-9360 New Haven 800-636-7524 Waterbury 800-572-6479 MAINE Augusta 800-322-4700 Bangor 800-432-7371 Biddeford 800-443-0505 Caribou 800-339-3029 Ellsworth 888-882-9322 Lewiston 800-252-2000 S. Portland 800-482-0791 Rockland 800-287-0015 West Bath 800-427-7990

Winslow F. W. Webb 800-640-9322 Kennebec Supply Kentrol/Sevco 800-533-1172 MASSACHUSETTS Auburn 800-872-0211 Bedford 800-221-9322 Bellingham 508-966-4999 Boston 617-482-8387 Brockton 800-544-9322 Canton 781-828-5559 Dedham 800-820-9322 Fitchburg 800-322-0899 Gloucester 978-283-7800 Greenfield 800-564-3644 Haverhill 800-521-7499 Hingham 781-749-9322

Hyannis 800-352-3159 Lowell 800-642-9322 Malden 800-963-7111 Methuen 866-548-9322 New Bedford Babbitt 888-354-0048 Northampton 800-282-7721 Pittsfield 800-578-9322 Plymouth 508-830-0125 Salem 800-345-5025 Springfield 800-660-3141 Sturbridge Pipe Depot 508-347-3342 Woburn 800-253-7838 Utilities Supply 800-343-7555

NEW HAMPSHIRE Concord

888.508.0050

Dover 800-582-7196 Exeter 888-993-9322 Gilford 800-345-1771 Keene 800-235-1218 Lebanon 800-322-8707 Madison 800-852-9203 Manchester 800-789-6488 Nashua 800-462-1440 NEW YORK Albany 800-432-9322 Binghamton 888-593-9322 Clyde 800-828-8824 Plattsburgh 800-622-9322 Queensbury 800-826-0326

Syracuse 800-262-9222 Utica 315-724-3191 RHODE ISLAND Cranston 800-795-6390 Webb Pump 866-850-7867 Webb Bio-Pharm 877-932-2246 Warwick 888-225-6850 VERMONT Barre 800-244-5044 Bennington 800-821-9506 Brattleboro 800-821-9511 Rutland 800-622-4365 Springfield 800-872-5303 St. Albans 800-696-3763 St. Johnsbury 800-872-8028 Williston 800-696-0340

F.W. Webb is a member of the following associations: A-D (Affiliated Distributors), ISPE, TAPPI, NECCARAPA, and MHEC.

For questions or comments, please email Carol Rosinski (Production Manager) at crr@fwwebb.com.

“Every Customer Counts” is our company tagline. If you want to feel appreciated, call F.W. Webb Company! You can feel the commitment as soon as you connect with a Webb person. You can sense the smile in the voice and attitude.

Yes, we have the inventory, trucks, products & services and more than any other single supplier in New England and New York, but the major tangible difference is how we make you feel when you call.

Thank You John Pope, CEO • jp@fwwebb.com Jeff Pope, President • jsp@fwwebb.com